From: "Clément Léger" <clement.leger@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>
Cc: "Clément Léger" <clement.leger@bootlin.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>
Subject: [PATCH v2 0/6] Add FDMA support on ocelot switch driver
Date: Wed, 3 Nov 2021 10:19:37 +0100 [thread overview]
Message-ID: <20211103091943.3878621-1-clement.leger@bootlin.com> (raw)
This series adds support for the Frame DMA present on the VSC7514
switch. The FDMA is able to extract and inject packets on the various
ethernet interfaces present on the switch.
While adding FDMA support, bindings were switched from .txt to .yaml
and MAC address reading from device-tree was added for testing
purposes. Jumbo frame support was also added since it gives a large
performance improvement with FDMA.
------------------
Changes in V2:
- Read MAC for each port and not as switch base MAC address
- Add missing static for some functions in ocelot_fdma.c
- Split change_mtu from fdma commit
- Add jumbo support for register based xmit
- Move precomputed header into ocelot_port struct
- Remove use of QUIRK_ENDIAN_LITTLE due to misconfiguration for tests
- Remove fragmented packet sending which has not been tested
Clément Léger (6):
net: ocelot: add support to get port mac from device-tree
dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml
net: ocelot: pre-compute injection frame header content
net: ocelot: add support for ndo_change_mtu
net: ocelot: add FDMA support
net: ocelot: add jumbo frame support for FDMA
.../bindings/net/mscc,vsc7514-switch.yaml | 184 +++++
.../devicetree/bindings/net/mscc-ocelot.txt | 83 --
drivers/net/ethernet/mscc/Makefile | 1 +
drivers/net/ethernet/mscc/ocelot.c | 23 +-
drivers/net/ethernet/mscc/ocelot.h | 3 +
drivers/net/ethernet/mscc/ocelot_fdma.c | 754 ++++++++++++++++++
drivers/net/ethernet/mscc/ocelot_fdma.h | 60 ++
drivers/net/ethernet/mscc/ocelot_net.c | 37 +-
drivers/net/ethernet/mscc/ocelot_vsc7514.c | 15 +
include/soc/mscc/ocelot.h | 7 +
10 files changed, 1075 insertions(+), 92 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
delete mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt
create mode 100644 drivers/net/ethernet/mscc/ocelot_fdma.c
create mode 100644 drivers/net/ethernet/mscc/ocelot_fdma.h
--
2.33.0
next reply other threads:[~2021-11-03 9:20 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-03 9:19 Clément Léger [this message]
2021-11-03 9:19 ` [PATCH v2 1/6] net: ocelot: add support to get port mac from device-tree Clément Léger
2021-11-03 10:26 ` Vladimir Oltean
2021-11-15 11:19 ` Julian Wiedmann
2021-11-15 11:24 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 2/6] dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml Clément Léger
2021-11-03 10:45 ` Vladimir Oltean
2021-11-08 11:13 ` Clément Léger
2021-11-12 20:06 ` Rob Herring
2021-11-03 9:19 ` [PATCH v2 3/6] net: ocelot: pre-compute injection frame header content Clément Léger
2021-11-03 12:38 ` Vladimir Oltean
2021-11-03 13:53 ` Clément Léger
2021-11-15 10:13 ` Clément Léger
2021-11-15 10:51 ` Vladimir Oltean
2021-11-15 10:58 ` Clément Léger
2021-11-15 14:08 ` Jakub Kicinski
2021-11-15 14:06 ` Clément Léger
2021-11-15 14:31 ` Vladimir Oltean
2021-11-15 16:03 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 4/6] net: ocelot: add support for ndo_change_mtu Clément Léger
2021-11-03 12:40 ` Vladimir Oltean
2021-11-03 13:07 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 5/6] net: ocelot: add FDMA support Clément Léger
2021-11-03 11:25 ` Denis Kirjanov
2021-11-03 12:31 ` Vladimir Oltean
2021-11-03 14:22 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 6/6] net: ocelot: add jumbo frame support for FDMA Clément Léger
2021-11-03 12:43 ` Vladimir Oltean
2021-11-03 14:30 ` Clément Léger
2021-11-03 10:46 ` [PATCH v2 0/6] Add FDMA support on ocelot switch driver Denis Kirjanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211103091943.3878621-1-clement.leger@bootlin.com \
--to=clement.leger@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.