Re: [PATCH v2 2/6] dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml

[Rob Herring <robh@kernel.org>]

On Wed, Nov 03, 2021 at 10:19:39AM +0100, Clément Léger wrote:
> Convert existing bindings to yaml format. In the same time, remove non
> exiting properties ("inj" interrupt) and add fdma.
> 
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---
>  .../bindings/net/mscc,vsc7514-switch.yaml     | 184 ++++++++++++++++++
>  .../devicetree/bindings/net/mscc-ocelot.txt   |  83 --------
>  2 files changed, 184 insertions(+), 83 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
>  delete mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> new file mode 100644
> index 000000000000..0c96eabf9d2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> @@ -0,0 +1,184 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip VSC7514 Ethernet switch controller
> +
> +maintainers:
> +  - Vladimir Oltean <vladimir.oltean@nxp.com>
> +  - Claudiu Manoil <claudiu.manoil@nxp.com>
> +  - Alexandre Belloni <alexandre.belloni@bootlin.com>
> +
> +description: |
> +  The VSC7514 Industrial IoT Ethernet switch contains four integrated dual media
> +  10/100/1000BASE-T PHYs, two 1G SGMII/SerDes, two 1G/2.5G SGMII/SerDes, and an
> +  option for either a 1G/2.5G SGMII/SerDes Node Processor Interface (NPI) or a
> +  PCIe interface for external CPU connectivity. The NPI/PCIe can operate as a
> +  standard Ethernet port.
> +
> +  The device provides a rich set of Industrial Ethernet switching features such
> +  as fast protection switching, 1588 precision time protocol, and synchronous
> +  Ethernet. Advanced TCAM-based VLAN and QoS processing enable delivery of
> +  differentiated services. Security is assured through frame processing using
> +  Microsemi’s TCAM-based Versatile Content Aware Processor.
> +
> +  In addition, the device contains a powerful 500 MHz CPU enabling full
> +  management of the switch.
> +
> +properties:
> +  $nodename:
> +    pattern: "^switch@[0-9a-f]+$"
> +
> +  compatible:
> +    const: mscc,vsc7514-switch
> +
> +  reg:
> +    items:
> +      - description: system target
> +      - description: rewriter target
> +      - description: qs target
> +      - description: PTP target
> +      - description: Port0 target
> +      - description: Port1 target
> +      - description: Port2 target
> +      - description: Port3 target
> +      - description: Port4 target
> +      - description: Port5 target
> +      - description: Port6 target
> +      - description: Port7 target
> +      - description: Port8 target
> +      - description: Port9 target
> +      - description: Port10 target
> +      - description: QSystem target
> +      - description: Analyzer target
> +      - description: S0 target
> +      - description: S1 target
> +      - description: S2 target
> +      - description: fdma target
> +
> +  reg-names:
> +    items:
> +      - const: sys
> +      - const: rew
> +      - const: qs
> +      - const: ptp
> +      - const: port0
> +      - const: port1
> +      - const: port2
> +      - const: port3
> +      - const: port4
> +      - const: port5
> +      - const: port6
> +      - const: port7
> +      - const: port8
> +      - const: port9
> +      - const: port10
> +      - const: qsys
> +      - const: ana
> +      - const: s0
> +      - const: s1
> +      - const: s2
> +      - const: fdma
> +
> +  interrupts:
> +    minItems: 1
> +    items:
> +      - description: PTP ready
> +      - description: register based extraction
> +      - description: frame dma based extraction
> +
> +  interrupt-names:
> +    minItems: 1
> +    items:
> +      - const: ptp_rdy
> +      - const: xtr
> +      - const: fdma
> +
> +  ethernet-ports:
> +    type: object

       additionalProperties: false

> +    patternProperties:
> +      "^port@[0-9a-f]+$":
> +        type: object
> +        description: Ethernet ports handled by the switch
> +
> +        allOf:

You can drop 'allOf'.

> +          - $ref: ethernet-controller.yaml#

           unevaluatedProperties: false

> +
> +        properties:
> +          '#address-cells':
> +            const: 1
> +          '#size-cells':
> +            const: 0

Wrong level for these.

> +
> +          reg:
> +            description: Switch port number
> +
> +          phy-handle: true
> +
> +          mac-address: true
> +
> +        required:
> +          - reg
> +          - phy-handle
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - ethernet-ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    switch@1010000 {
> +      compatible = "mscc,vsc7514-switch";
> +      reg = <0x1010000 0x10000>,
> +            <0x1030000 0x10000>,
> +            <0x1080000 0x100>,
> +            <0x10e0000 0x10000>,
> +            <0x11e0000 0x100>,
> +            <0x11f0000 0x100>,
> +            <0x1200000 0x100>,
> +            <0x1210000 0x100>,
> +            <0x1220000 0x100>,
> +            <0x1230000 0x100>,
> +            <0x1240000 0x100>,
> +            <0x1250000 0x100>,
> +            <0x1260000 0x100>,
> +            <0x1270000 0x100>,
> +            <0x1280000 0x100>,
> +            <0x1800000 0x80000>,
> +            <0x1880000 0x10000>,
> +            <0x1040000 0x10000>,
> +            <0x1050000 0x10000>,
> +            <0x1060000 0x10000>,
> +            <0x1a0 0x1c4>;
> +      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> +            "port2", "port3", "port4", "port5", "port6",
> +            "port7", "port8", "port9", "port10", "qsys",
> +            "ana", "s0", "s1", "s2", "fdma";
> +      interrupts = <18 21 16>;
> +      interrupt-names = "ptp_rdy", "xtr", "fdma";
> +
> +      ethernet-ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        port0: port@0 {
> +          reg = <0>;
> +          phy-handle = <&phy0>;
> +        };
> +        port1: port@1 {
> +          reg = <1>;
> +          phy-handle = <&phy1>;
> +        };
> +      };
> +    };
> +
> +...
> +#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :

Please drop this. 

emacs settings are fine, but not vim. ;) JK, I don't use either.