* [PATCH v4 0/3] phy: Add driver for lan966x Serdes driver
@ 2021-10-20 9:42 ` Horatiu Vultur
0 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
This patch serie adds support for Microchip lan966x serdes. The lan966x
device contains has 7 interfaces, consisting of 2 copper transceivers,
3 Serdes and 2 RGMII interfaces. Two of the Serdes support QSGMII.
The driver also adds the functionality of "muxing" the interfaces to
different logical ports.
The following table shows which interfaces can be supported by the port.
PortNumber Max Speed Ethernet interface options
0 1Gbps CuPHY, 1G SGMII or QSGMII
1 1Gbps CuPHY, 1G SGMII or QSGMII
2 2.5Gbps 2.5G SGMII, QSGMII, RGMII
3 2.5Gbps 2.5G SGMII, QSGMII, RGMII
4 2.5Gbps 2.5G SGMII, QSGMII
5 1Gbps QSGMII, RGMII
6 1Gbps QSGMII, RGMII
7 1Gbps QSGMII
v3->v4:
- update description of the driver
- removed unused registers
- use bitfield operations in the registers
- add macros for PLL configuration
- move macros and structs at the top of the file
v2->v3:
- remove unused includes
- add missing '...' in microchip,lan966x-serdes.yaml
- rename lan966x-serdes.h to phy-lan966x-serdes.h
- Rename CU->PHY and RG->RGMII
- update commit message for PATCH 2
v1->v2:
- replace the regmap with iomem
- update DT bindings
Horatiu Vultur (3):
dt-bindings: phy: Add lan966x-serdes binding
dt-bindings: phy: Add constants for lan966x serdes
phy: Add lan966x ethernet serdes PHY driver
.../phy/microchip,lan966x-serdes.yaml | 59 ++
drivers/phy/microchip/Kconfig | 8 +
drivers/phy/microchip/Makefile | 1 +
drivers/phy/microchip/lan966x_serdes.c | 548 ++++++++++++++++++
drivers/phy/microchip/lan966x_serdes_regs.h | 209 +++++++
include/dt-bindings/phy/phy-lan966x-serdes.h | 14 +
6 files changed, 839 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
create mode 100644 drivers/phy/microchip/lan966x_serdes.c
create mode 100644 drivers/phy/microchip/lan966x_serdes_regs.h
create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 0/3] phy: Add driver for lan966x Serdes driver
@ 2021-10-20 9:42 ` Horatiu Vultur
0 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
This patch serie adds support for Microchip lan966x serdes. The lan966x
device contains has 7 interfaces, consisting of 2 copper transceivers,
3 Serdes and 2 RGMII interfaces. Two of the Serdes support QSGMII.
The driver also adds the functionality of "muxing" the interfaces to
different logical ports.
The following table shows which interfaces can be supported by the port.
PortNumber Max Speed Ethernet interface options
0 1Gbps CuPHY, 1G SGMII or QSGMII
1 1Gbps CuPHY, 1G SGMII or QSGMII
2 2.5Gbps 2.5G SGMII, QSGMII, RGMII
3 2.5Gbps 2.5G SGMII, QSGMII, RGMII
4 2.5Gbps 2.5G SGMII, QSGMII
5 1Gbps QSGMII, RGMII
6 1Gbps QSGMII, RGMII
7 1Gbps QSGMII
v3->v4:
- update description of the driver
- removed unused registers
- use bitfield operations in the registers
- add macros for PLL configuration
- move macros and structs at the top of the file
v2->v3:
- remove unused includes
- add missing '...' in microchip,lan966x-serdes.yaml
- rename lan966x-serdes.h to phy-lan966x-serdes.h
- Rename CU->PHY and RG->RGMII
- update commit message for PATCH 2
v1->v2:
- replace the regmap with iomem
- update DT bindings
Horatiu Vultur (3):
dt-bindings: phy: Add lan966x-serdes binding
dt-bindings: phy: Add constants for lan966x serdes
phy: Add lan966x ethernet serdes PHY driver
.../phy/microchip,lan966x-serdes.yaml | 59 ++
drivers/phy/microchip/Kconfig | 8 +
drivers/phy/microchip/Makefile | 1 +
drivers/phy/microchip/lan966x_serdes.c | 548 ++++++++++++++++++
drivers/phy/microchip/lan966x_serdes_regs.h | 209 +++++++
include/dt-bindings/phy/phy-lan966x-serdes.h | 14 +
6 files changed, 839 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
create mode 100644 drivers/phy/microchip/lan966x_serdes.c
create mode 100644 drivers/phy/microchip/lan966x_serdes_regs.h
create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
--
2.33.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 1/3] dt-bindings: phy: Add lan966x-serdes binding
2021-10-20 9:42 ` Horatiu Vultur
@ 2021-10-20 9:42 ` Horatiu Vultur
-1 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
Document the lan966x ethernet serdes phy driver bindings.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
.../phy/microchip,lan966x-serdes.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
new file mode 100644
index 000000000000..6e914fbbac56
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Serdes controller
+
+maintainers:
+ - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+ Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU),
+ 3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII.
+ Also it has 8 logical Ethernet ports which can be connected to these
+ interfaces. The Serdes controller will allow to configure these interfaces
+ and allows to "mux" the interfaces to different ports.
+
+ For simple selection of the interface that is used with a port, the
+ following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a
+ number that represents the index of that interface type. For example
+ CU(1) means use interface copper transceivers 1. SERDES6G(2) means use
+ interface SerDes 2.
+
+properties:
+ $nodename:
+ pattern: "^serdes@[0-9a-f]+$"
+
+ compatible:
+ const: microchip,lan966x-serdes
+
+ reg:
+ items:
+ - description: HSIO registers
+ - description: HW_STAT register
+
+ '#phy-cells':
+ const: 2
+ description: |
+ - Input port to use for a given macro.
+ - The macro to be used. The macros are defined in
+ dt-bindings/phy/phy-lan966x-serdes.
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ serdes: serdes@e2004010 {
+ compatible = "microchip,lan966x-serdes";
+ reg = <0xe202c000 0x9c>, <0xe2004010 0x4>;
+ #phy-cells = <2>;
+ };
+
+...
--
2.33.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 1/3] dt-bindings: phy: Add lan966x-serdes binding
@ 2021-10-20 9:42 ` Horatiu Vultur
0 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
Document the lan966x ethernet serdes phy driver bindings.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
.../phy/microchip,lan966x-serdes.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
new file mode 100644
index 000000000000..6e914fbbac56
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Serdes controller
+
+maintainers:
+ - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+ Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU),
+ 3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII.
+ Also it has 8 logical Ethernet ports which can be connected to these
+ interfaces. The Serdes controller will allow to configure these interfaces
+ and allows to "mux" the interfaces to different ports.
+
+ For simple selection of the interface that is used with a port, the
+ following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a
+ number that represents the index of that interface type. For example
+ CU(1) means use interface copper transceivers 1. SERDES6G(2) means use
+ interface SerDes 2.
+
+properties:
+ $nodename:
+ pattern: "^serdes@[0-9a-f]+$"
+
+ compatible:
+ const: microchip,lan966x-serdes
+
+ reg:
+ items:
+ - description: HSIO registers
+ - description: HW_STAT register
+
+ '#phy-cells':
+ const: 2
+ description: |
+ - Input port to use for a given macro.
+ - The macro to be used. The macros are defined in
+ dt-bindings/phy/phy-lan966x-serdes.
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ serdes: serdes@e2004010 {
+ compatible = "microchip,lan966x-serdes";
+ reg = <0xe202c000 0x9c>, <0xe2004010 0x4>;
+ #phy-cells = <2>;
+ };
+
+...
--
2.33.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 2/3] dt-bindings: phy: Add constants for lan966x serdes
2021-10-20 9:42 ` Horatiu Vultur
@ 2021-10-20 9:42 ` Horatiu Vultur
-1 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
Lan966x has: 2 integrated PHYs, 3 SerDes and 2 RGMII interfaces. Which
requires to be muxed based on the HW representation.
So add constants for each interface to be able to distinguish them.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
include/dt-bindings/phy/phy-lan966x-serdes.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
diff --git a/include/dt-bindings/phy/phy-lan966x-serdes.h b/include/dt-bindings/phy/phy-lan966x-serdes.h
new file mode 100644
index 000000000000..4330269a901e
--- /dev/null
+++ b/include/dt-bindings/phy/phy-lan966x-serdes.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+
+#ifndef __PHY_LAN966X_SERDES_H__
+#define __PHY_LAN966X_SERDES_H__
+
+#define CU(x) (x)
+#define CU_MAX CU(2)
+#define SERDES6G(x) (CU_MAX + 1 + (x))
+#define SERDES6G_MAX SERDES6G(3)
+#define RGMII(x) (SERDES6G_MAX + 1 + (x))
+#define RGMII_MAX RGMII(2)
+#define SERDES_MAX (RGMII_MAX + 1)
+
+#endif
--
2.33.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 2/3] dt-bindings: phy: Add constants for lan966x serdes
@ 2021-10-20 9:42 ` Horatiu Vultur
0 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
Lan966x has: 2 integrated PHYs, 3 SerDes and 2 RGMII interfaces. Which
requires to be muxed based on the HW representation.
So add constants for each interface to be able to distinguish them.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
include/dt-bindings/phy/phy-lan966x-serdes.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
diff --git a/include/dt-bindings/phy/phy-lan966x-serdes.h b/include/dt-bindings/phy/phy-lan966x-serdes.h
new file mode 100644
index 000000000000..4330269a901e
--- /dev/null
+++ b/include/dt-bindings/phy/phy-lan966x-serdes.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+
+#ifndef __PHY_LAN966X_SERDES_H__
+#define __PHY_LAN966X_SERDES_H__
+
+#define CU(x) (x)
+#define CU_MAX CU(2)
+#define SERDES6G(x) (CU_MAX + 1 + (x))
+#define SERDES6G_MAX SERDES6G(3)
+#define RGMII(x) (SERDES6G_MAX + 1 + (x))
+#define RGMII_MAX RGMII(2)
+#define SERDES_MAX (RGMII_MAX + 1)
+
+#endif
--
2.33.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 3/3] phy: Add lan966x ethernet serdes PHY driver
2021-10-20 9:42 ` Horatiu Vultur
@ 2021-10-20 9:42 ` Horatiu Vultur
-1 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
Add the Microchip lan966x ethernet serdes PHY driver for interfaces
available in the lan966x SoC.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
drivers/phy/microchip/Kconfig | 8 +
drivers/phy/microchip/Makefile | 1 +
drivers/phy/microchip/lan966x_serdes.c | 548 ++++++++++++++++++++
drivers/phy/microchip/lan966x_serdes_regs.h | 209 ++++++++
4 files changed, 766 insertions(+)
create mode 100644 drivers/phy/microchip/lan966x_serdes.c
create mode 100644 drivers/phy/microchip/lan966x_serdes_regs.h
diff --git a/drivers/phy/microchip/Kconfig b/drivers/phy/microchip/Kconfig
index 3728a284bf64..38039ed0754c 100644
--- a/drivers/phy/microchip/Kconfig
+++ b/drivers/phy/microchip/Kconfig
@@ -11,3 +11,11 @@ config PHY_SPARX5_SERDES
depends on HAS_IOMEM
help
Enable this for support of the 10G/25G SerDes on Microchip Sparx5.
+
+config PHY_LAN966X_SERDES
+ tristate "SerDes PHY driver for Microchip LAN966X"
+ select GENERIC_PHY
+ depends on OF
+ depends on MFD_SYSCON
+ help
+ Enable this for supporting SerDes muxing with Microchip LAN966X
diff --git a/drivers/phy/microchip/Makefile b/drivers/phy/microchip/Makefile
index 7b98345712aa..fd73b87960a5 100644
--- a/drivers/phy/microchip/Makefile
+++ b/drivers/phy/microchip/Makefile
@@ -4,3 +4,4 @@
#
obj-$(CONFIG_PHY_SPARX5_SERDES) := sparx5_serdes.o
+obj-$(CONFIG_PHY_LAN966X_SERDES) := lan966x_serdes.o
diff --git a/drivers/phy/microchip/lan966x_serdes.c b/drivers/phy/microchip/lan966x_serdes.c
new file mode 100644
index 000000000000..262bb616b4bb
--- /dev/null
+++ b/drivers/phy/microchip/lan966x_serdes.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/phy/phy-lan966x-serdes.h>
+#include "lan966x_serdes_regs.h"
+
+#define PLL_CONF_MASK GENMASK(4, 3)
+#define PLL_CONF_25MHZ 0
+#define PLL_CONF_125MHZ 1
+#define PLL_CONF_SERDES_125MHZ 2
+#define PLL_CONF_BYPASS 3
+
+#define lan_offset_(id, tinst, tcnt, \
+ gbase, ginst, gcnt, gwidth, \
+ raddr, rinst, rcnt, rwidth) \
+ (gbase + ((ginst) * gwidth) + raddr + ((rinst) * rwidth))
+#define lan_offset(...) lan_offset_(__VA_ARGS__)
+
+#define lan_rmw(val, mask, reg, off) \
+ lan_rmw_(val, mask, reg, lan_offset(off))
+
+#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \
+ .idx = _idx, \
+ .port = _port, \
+ .mode = _mode, \
+ .submode = _submode, \
+ .mask = _mask, \
+ .mux = _mux, \
+}
+
+#define SERDES_MUX_GMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_GMII, m, c)
+#define SERDES_MUX_SGMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_SGMII, m, c)
+#define SERDES_MUX_QSGMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_QSGMII, m, c)
+#define SERDES_MUX_RGMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_RGMII, m, c)
+
+static void lan_rmw_(u32 val, u32 mask, void __iomem *mem, u32 offset)
+{
+ u32 v;
+
+ v = readl(mem + offset);
+ v = (v & ~mask) | (val & mask);
+ writel(v, mem + offset);
+}
+
+struct serdes_mux {
+ u8 idx;
+ u8 port;
+ enum phy_mode mode;
+ int submode;
+ u32 mask;
+ u32 mux;
+};
+
+static const struct serdes_mux lan966x_serdes_muxes[] = {
+ SERDES_MUX_QSGMII(SERDES6G(1), 0, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_QSGMII(SERDES6G(1), 1, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_QSGMII(SERDES6G(1), 2, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_QSGMII(SERDES6G(1), 3, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+
+ SERDES_MUX_QSGMII(SERDES6G(2), 4, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_QSGMII(SERDES6G(2), 5, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_QSGMII(SERDES6G(2), 6, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_QSGMII(SERDES6G(2), 7, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+
+ SERDES_MUX_GMII(CU(0), 0, HSIO_HW_CFG_GMII_ENA,
+ HSIO_HW_CFG_GMII_ENA_SET(BIT(0))),
+ SERDES_MUX_GMII(CU(1), 1, HSIO_HW_CFG_GMII_ENA,
+ HSIO_HW_CFG_GMII_ENA_SET(BIT(1))),
+
+ SERDES_MUX_SGMII(SERDES6G(0), 0, HSIO_HW_CFG_SD6G_0_CFG, 0),
+ SERDES_MUX_SGMII(SERDES6G(1), 1, HSIO_HW_CFG_SD6G_1_CFG, 0),
+ SERDES_MUX_SGMII(SERDES6G(0), 2, HSIO_HW_CFG_SD6G_0_CFG,
+ HSIO_HW_CFG_SD6G_0_CFG_SET(1)),
+ SERDES_MUX_SGMII(SERDES6G(1), 3, HSIO_HW_CFG_SD6G_1_CFG,
+ HSIO_HW_CFG_SD6G_1_CFG_SET(1)),
+
+ SERDES_MUX_RGMII(RGMII(0), 2, HSIO_HW_CFG_RGMII_0_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_0_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_RGMII(RGMII(1), 3, HSIO_HW_CFG_RGMII_1_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_1_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_RGMII(RGMII(0), 5, HSIO_HW_CFG_RGMII_0_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_0_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_RGMII(RGMII(1), 6, HSIO_HW_CFG_RGMII_1_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_1_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(1))),
+};
+
+struct serdes_ctrl {
+ void __iomem *regs;
+ struct device *dev;
+ struct phy *phys[SERDES_MAX];
+ int ref125;
+};
+
+struct serdes_macro {
+ u8 idx;
+ int port;
+ struct serdes_ctrl *ctrl;
+ int speed;
+ phy_interface_t mode;
+};
+
+enum lan966x_sd6g40_mode {
+ LAN966X_SD6G40_MODE_QSGMII,
+ LAN966X_SD6G40_MODE_SGMII,
+};
+
+enum lan966x_sd6g40_ltx2rx {
+ LAN966X_SD6G40_TX2RX_LOOP_NONE,
+ LAN966X_SD6G40_LTX2RX
+};
+
+struct lan966x_sd6g40_setup_args {
+ enum lan966x_sd6g40_mode mode;
+ enum lan966x_sd6g40_ltx2rx tx2rx_loop;
+ bool txinvert;
+ bool rxinvert;
+ bool refclk125M;
+ bool mute;
+};
+
+struct lan966x_sd6g40_mode_args {
+ enum lan966x_sd6g40_mode mode;
+ u8 lane_10bit_sel;
+ u8 mpll_multiplier;
+ u8 ref_clkdiv2;
+ u8 tx_rate;
+ u8 rx_rate;
+};
+
+struct lan966x_sd6g40_setup {
+ u8 rx_term_en;
+ u8 lane_10bit_sel;
+ u8 tx_invert;
+ u8 rx_invert;
+ u8 mpll_multiplier;
+ u8 lane_loopbk_en;
+ u8 ref_clkdiv2;
+ u8 tx_rate;
+ u8 rx_rate;
+};
+
+static int lan966x_sd6g40_reg_cfg(struct serdes_macro *macro,
+ struct lan966x_sd6g40_setup *res_struct,
+ u32 idx)
+{
+ u32 value;
+
+ /* Note: SerDes HSIO is configured in 1G_LAN mode */
+ lan_rmw(HSIO_SD_CFG_LANE_10BIT_SEL_SET(res_struct->lane_10bit_sel) |
+ HSIO_SD_CFG_RX_RATE_SET(res_struct->rx_rate) |
+ HSIO_SD_CFG_TX_RATE_SET(res_struct->tx_rate) |
+ HSIO_SD_CFG_TX_INVERT_SET(res_struct->tx_invert) |
+ HSIO_SD_CFG_RX_INVERT_SET(res_struct->rx_invert) |
+ HSIO_SD_CFG_LANE_LOOPBK_EN_SET(res_struct->lane_loopbk_en) |
+ HSIO_SD_CFG_RX_RESET_SET(0) |
+ HSIO_SD_CFG_TX_RESET_SET(0),
+ HSIO_SD_CFG_LANE_10BIT_SEL |
+ HSIO_SD_CFG_RX_RATE |
+ HSIO_SD_CFG_TX_RATE |
+ HSIO_SD_CFG_TX_INVERT |
+ HSIO_SD_CFG_RX_INVERT |
+ HSIO_SD_CFG_LANE_LOOPBK_EN |
+ HSIO_SD_CFG_RX_RESET |
+ HSIO_SD_CFG_TX_RESET,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ lan_rmw(HSIO_MPLL_CFG_MPLL_MULTIPLIER_SET(res_struct->mpll_multiplier) |
+ HSIO_MPLL_CFG_REF_CLKDIV2_SET(res_struct->ref_clkdiv2),
+ HSIO_MPLL_CFG_MPLL_MULTIPLIER |
+ HSIO_MPLL_CFG_REF_CLKDIV2,
+ macro->ctrl->regs, HSIO_MPLL_CFG(idx));
+
+ lan_rmw(HSIO_SD_CFG_RX_TERM_EN_SET(res_struct->rx_term_en),
+ HSIO_SD_CFG_RX_TERM_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ lan_rmw(HSIO_MPLL_CFG_REF_SSP_EN_SET(1),
+ HSIO_MPLL_CFG_REF_SSP_EN,
+ macro->ctrl->regs, HSIO_MPLL_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ lan_rmw(HSIO_SD_CFG_PHY_RESET_SET(0),
+ HSIO_SD_CFG_PHY_RESET,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ lan_rmw(HSIO_MPLL_CFG_MPLL_EN_SET(1),
+ HSIO_MPLL_CFG_MPLL_EN,
+ macro->ctrl->regs, HSIO_MPLL_CFG(idx));
+
+ usleep_range(7 * USEC_PER_MSEC, 8 * USEC_PER_MSEC);
+
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_MPLL_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] mpll_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ lan_rmw(HSIO_SD_CFG_TX_CM_EN_SET(1),
+ HSIO_SD_CFG_TX_CM_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_TX_CM_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] tx_cm_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ lan_rmw(HSIO_SD_CFG_RX_PLL_EN_SET(1) |
+ HSIO_SD_CFG_TX_EN_SET(1),
+ HSIO_SD_CFG_RX_PLL_EN |
+ HSIO_SD_CFG_TX_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ /* Waiting for serdes 0 rx DPLL to lock... */
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_RX_PLL_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] rx_pll_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ /* Waiting for serdes 0 tx operational... */
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_TX_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] tx_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ lan_rmw(HSIO_SD_CFG_TX_DATA_EN_SET(1) |
+ HSIO_SD_CFG_RX_DATA_EN_SET(1),
+ HSIO_SD_CFG_TX_DATA_EN |
+ HSIO_SD_CFG_RX_DATA_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ return 0;
+}
+
+static int lan966x_sd6g40_get_conf_from_mode(struct serdes_macro *macro,
+ enum lan966x_sd6g40_mode f_mode,
+ bool ref125M,
+ struct lan966x_sd6g40_mode_args *ret_val)
+{
+ switch (f_mode) {
+ case LAN966X_SD6G40_MODE_QSGMII:
+ ret_val->lane_10bit_sel = 0;
+ if (ref125M) {
+ ret_val->mpll_multiplier = 40;
+ ret_val->ref_clkdiv2 = 0x1;
+ ret_val->tx_rate = 0x0;
+ ret_val->rx_rate = 0x0;
+ } else {
+ ret_val->mpll_multiplier = 100;
+ ret_val->ref_clkdiv2 = 0x0;
+ ret_val->tx_rate = 0x0;
+ ret_val->rx_rate = 0x0;
+ }
+ break;
+
+ case LAN966X_SD6G40_MODE_SGMII:
+ ret_val->lane_10bit_sel = 1;
+ if (ref125M) {
+ ret_val->mpll_multiplier = macro->speed == SPEED_2500 ? 50 : 40;
+ ret_val->ref_clkdiv2 = 0x1;
+ ret_val->tx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ ret_val->rx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ } else {
+ ret_val->mpll_multiplier = macro->speed == SPEED_2500 ? 125 : 100;
+ ret_val->ref_clkdiv2 = 0x0;
+ ret_val->tx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ ret_val->rx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ }
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int lan966x_calc_sd6g40_setup_lane(struct serdes_macro *macro,
+ struct lan966x_sd6g40_setup_args config,
+ struct lan966x_sd6g40_setup *ret_val)
+{
+ struct lan966x_sd6g40_mode_args sd6g40_mode;
+ struct lan966x_sd6g40_mode_args *mode_args = &sd6g40_mode;
+ int ret;
+
+ ret = lan966x_sd6g40_get_conf_from_mode(macro, config.mode,
+ config.refclk125M, mode_args);
+ if (ret)
+ return ret;
+
+ ret_val->lane_10bit_sel = mode_args->lane_10bit_sel;
+ ret_val->rx_rate = mode_args->rx_rate;
+ ret_val->tx_rate = mode_args->tx_rate;
+ ret_val->mpll_multiplier = mode_args->mpll_multiplier;
+ ret_val->ref_clkdiv2 = mode_args->ref_clkdiv2;
+ ret_val->rx_term_en = 0;
+
+ if (config.tx2rx_loop == LAN966X_SD6G40_LTX2RX)
+ ret_val->lane_loopbk_en = 1;
+ else
+ ret_val->lane_loopbk_en = 0;
+
+ ret_val->tx_invert = !!config.txinvert;
+ ret_val->rx_invert = !!config.rxinvert;
+
+ return 0;
+}
+
+static int lan966x_sd6g40_setup_lane(struct serdes_macro *macro,
+ struct lan966x_sd6g40_setup_args config,
+ u32 idx)
+{
+ struct lan966x_sd6g40_setup calc_results = {};
+ int ret;
+
+ ret = lan966x_calc_sd6g40_setup_lane(macro, config, &calc_results);
+ if (ret)
+ return ret;
+
+ return lan966x_sd6g40_reg_cfg(macro, &calc_results, idx);
+}
+
+static int lan966x_sd6g40_setup(struct serdes_macro *macro, u32 idx, int mode)
+{
+ struct lan966x_sd6g40_setup_args conf = {};
+
+ conf.refclk125M = macro->ctrl->ref125;
+
+ if (mode == PHY_INTERFACE_MODE_QSGMII)
+ conf.mode = LAN966X_SD6G40_MODE_QSGMII;
+ else
+ conf.mode = LAN966X_SD6G40_MODE_SGMII;
+
+ return lan966x_sd6g40_setup_lane(macro, conf, idx);
+}
+
+static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct serdes_macro *macro = phy_get_drvdata(phy);
+ unsigned int i;
+ int val;
+
+ /* As of now only PHY_MODE_ETHERNET is supported */
+ if (mode != PHY_MODE_ETHERNET)
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < ARRAY_SIZE(lan966x_serdes_muxes); i++) {
+ if (macro->idx != lan966x_serdes_muxes[i].idx ||
+ mode != lan966x_serdes_muxes[i].mode ||
+ submode != lan966x_serdes_muxes[i].submode ||
+ macro->port != lan966x_serdes_muxes[i].port)
+ continue;
+
+ val = readl(macro->ctrl->regs + lan_offset(HSIO_HW_CFG));
+ val |= lan966x_serdes_muxes[i].mux;
+ lan_rmw(val, lan966x_serdes_muxes[i].mask,
+ macro->ctrl->regs, HSIO_HW_CFG);
+
+ macro->mode = lan966x_serdes_muxes[i].submode;
+
+ if (macro->idx < CU_MAX)
+ return 0;
+
+ if (macro->idx < SERDES6G_MAX)
+ return lan966x_sd6g40_setup(macro,
+ macro->idx - (CU_MAX + 1),
+ macro->mode);
+
+ if (macro->idx < RGMII_MAX)
+ return 0;
+
+ return -EOPNOTSUPP;
+ }
+
+ return -EINVAL;
+}
+
+static int serdes_set_speed(struct phy *phy, int speed)
+{
+ struct serdes_macro *macro = phy_get_drvdata(phy);
+
+ macro->speed = speed;
+
+ return lan966x_sd6g40_setup(macro, macro->idx - (CU_MAX + 1),
+ macro->mode);
+}
+
+static const struct phy_ops serdes_ops = {
+ .set_mode = serdes_set_mode,
+ .set_speed = serdes_set_speed,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *serdes_simple_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct serdes_ctrl *ctrl = dev_get_drvdata(dev);
+ unsigned int port, idx, i;
+
+ if (args->args_count != 2)
+ return ERR_PTR(-EINVAL);
+
+ port = args->args[0];
+ idx = args->args[1];
+
+ for (i = 0; i < SERDES_MAX; i++) {
+ struct serdes_macro *macro = phy_get_drvdata(ctrl->phys[i]);
+
+ if (idx != macro->idx)
+ continue;
+
+ macro->port = port;
+ return ctrl->phys[i];
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+static int serdes_phy_create(struct serdes_ctrl *ctrl, u8 idx, struct phy **phy)
+{
+ struct serdes_macro *macro;
+
+ *phy = devm_phy_create(ctrl->dev, NULL, &serdes_ops);
+ if (IS_ERR(*phy))
+ return PTR_ERR(*phy);
+
+ macro = devm_kzalloc(ctrl->dev, sizeof(*macro), GFP_KERNEL);
+ if (!macro)
+ return -ENOMEM;
+
+ macro->idx = idx;
+ macro->ctrl = ctrl;
+ macro->speed = SPEED_1000;
+ macro->port = -1;
+
+ phy_set_drvdata(*phy, macro);
+
+ return 0;
+}
+
+static int serdes_probe(struct platform_device *pdev)
+{
+ struct phy_provider *provider;
+ struct serdes_ctrl *ctrl;
+ void __iomem *hw_stat;
+ unsigned int i;
+ u32 val;
+ int ret;
+
+ ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ ctrl->dev = &pdev->dev;
+ ctrl->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(ctrl->regs))
+ return PTR_ERR(ctrl->regs);
+
+ hw_stat = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
+ if (IS_ERR(hw_stat))
+ return PTR_ERR(hw_stat);
+
+ for (i = 0; i < SERDES_MAX; i++) {
+ ret = serdes_phy_create(ctrl, i, &ctrl->phys[i]);
+ if (ret)
+ return ret;
+ }
+
+ val = readl(hw_stat);
+ val = FIELD_GET(PLL_CONF_MASK, val);
+ ctrl->ref125 = (val == PLL_CONF_125MHZ ||
+ val == PLL_CONF_SERDES_125MHZ);
+
+ dev_set_drvdata(&pdev->dev, ctrl);
+
+ provider = devm_of_phy_provider_register(ctrl->dev,
+ serdes_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id serdes_ids[] = {
+ { .compatible = "microchip,lan966x-serdes", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, serdes_ids);
+
+static struct platform_driver mscc_lan966x_serdes = {
+ .probe = serdes_probe,
+ .driver = {
+ .name = "microchip,lan966x-serdes",
+ .of_match_table = of_match_ptr(serdes_ids),
+ },
+};
+
+module_platform_driver(mscc_lan966x_serdes);
+
+MODULE_DESCRIPTION("Microchip lan966x switch serdes driver");
+MODULE_AUTHOR("Horatiu Vultur <horatiu.vultur@microchip.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/microchip/lan966x_serdes_regs.h b/drivers/phy/microchip/lan966x_serdes_regs.h
new file mode 100644
index 000000000000..ea30f64ffd5c
--- /dev/null
+++ b/drivers/phy/microchip/lan966x_serdes_regs.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _LAN966X_SERDES_REGS_H_
+#define _LAN966X_SERDES_REGS_H_
+
+#include <linux/bitfield.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+
+enum lan966x_target {
+ TARGET_HSIO = 32,
+ NUM_TARGETS = 66
+};
+
+#define __REG(...) __VA_ARGS__
+
+/* HSIO:SD:SD_CFG */
+#define HSIO_SD_CFG(g) __REG(TARGET_HSIO, 0, 1, 8, g, 3, 32, 0, 0, 1, 4)
+
+#define HSIO_SD_CFG_PHY_RESET BIT(27)
+#define HSIO_SD_CFG_PHY_RESET_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_PHY_RESET, x)
+#define HSIO_SD_CFG_PHY_RESET_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_PHY_RESET, x)
+
+#define HSIO_SD_CFG_TX_RESET BIT(18)
+#define HSIO_SD_CFG_TX_RESET_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_RESET, x)
+#define HSIO_SD_CFG_TX_RESET_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_RESET, x)
+
+#define HSIO_SD_CFG_TX_RATE GENMASK(17, 16)
+#define HSIO_SD_CFG_TX_RATE_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_RATE, x)
+#define HSIO_SD_CFG_TX_RATE_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_RATE, x)
+
+#define HSIO_SD_CFG_TX_INVERT BIT(15)
+#define HSIO_SD_CFG_TX_INVERT_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_INVERT, x)
+#define HSIO_SD_CFG_TX_INVERT_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_INVERT, x)
+
+#define HSIO_SD_CFG_TX_EN BIT(14)
+#define HSIO_SD_CFG_TX_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_EN, x)
+#define HSIO_SD_CFG_TX_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_EN, x)
+
+#define HSIO_SD_CFG_TX_DATA_EN BIT(12)
+#define HSIO_SD_CFG_TX_DATA_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_DATA_EN, x)
+#define HSIO_SD_CFG_TX_DATA_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_DATA_EN, x)
+
+#define HSIO_SD_CFG_TX_CM_EN BIT(11)
+#define HSIO_SD_CFG_TX_CM_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_CM_EN, x)
+#define HSIO_SD_CFG_TX_CM_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_CM_EN, x)
+
+#define HSIO_SD_CFG_LANE_10BIT_SEL BIT(10)
+#define HSIO_SD_CFG_LANE_10BIT_SEL_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_LANE_10BIT_SEL, x)
+#define HSIO_SD_CFG_LANE_10BIT_SEL_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_LANE_10BIT_SEL, x)
+
+#define HSIO_SD_CFG_RX_TERM_EN BIT(9)
+#define HSIO_SD_CFG_RX_TERM_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_TERM_EN, x)
+#define HSIO_SD_CFG_RX_TERM_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_TERM_EN, x)
+
+#define HSIO_SD_CFG_RX_RESET BIT(8)
+#define HSIO_SD_CFG_RX_RESET_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_RESET, x)
+#define HSIO_SD_CFG_RX_RESET_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_RESET, x)
+
+#define HSIO_SD_CFG_RX_RATE GENMASK(7, 6)
+#define HSIO_SD_CFG_RX_RATE_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_RATE, x)
+#define HSIO_SD_CFG_RX_RATE_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_RATE, x)
+
+#define HSIO_SD_CFG_RX_PLL_EN BIT(5)
+#define HSIO_SD_CFG_RX_PLL_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_PLL_EN, x)
+#define HSIO_SD_CFG_RX_PLL_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_PLL_EN, x)
+
+#define HSIO_SD_CFG_RX_INVERT BIT(3)
+#define HSIO_SD_CFG_RX_INVERT_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_INVERT, x)
+#define HSIO_SD_CFG_RX_INVERT_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_INVERT, x)
+
+#define HSIO_SD_CFG_RX_DATA_EN BIT(2)
+#define HSIO_SD_CFG_RX_DATA_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_DATA_EN, x)
+#define HSIO_SD_CFG_RX_DATA_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_DATA_EN, x)
+
+#define HSIO_SD_CFG_LANE_LOOPBK_EN BIT(0)
+#define HSIO_SD_CFG_LANE_LOOPBK_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_LANE_LOOPBK_EN, x)
+#define HSIO_SD_CFG_LANE_LOOPBK_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_LANE_LOOPBK_EN, x)
+
+/* HSIO:SD:MPLL_CFG */
+#define HSIO_MPLL_CFG(g) __REG(TARGET_HSIO, 0, 1, 8, g, 3, 32, 8, 0, 1, 4)
+
+#define HSIO_MPLL_CFG_REF_SSP_EN BIT(18)
+#define HSIO_MPLL_CFG_REF_SSP_EN_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_REF_SSP_EN, x)
+#define HSIO_MPLL_CFG_REF_SSP_EN_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_REF_SSP_EN, x)
+
+#define HSIO_MPLL_CFG_REF_CLKDIV2 BIT(17)
+#define HSIO_MPLL_CFG_REF_CLKDIV2_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_REF_CLKDIV2, x)
+#define HSIO_MPLL_CFG_REF_CLKDIV2_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_REF_CLKDIV2, x)
+
+#define HSIO_MPLL_CFG_MPLL_EN BIT(16)
+#define HSIO_MPLL_CFG_MPLL_EN_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_MPLL_EN, x)
+#define HSIO_MPLL_CFG_MPLL_EN_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_MPLL_EN, x)
+
+#define HSIO_MPLL_CFG_MPLL_MULTIPLIER GENMASK(6, 0)
+#define HSIO_MPLL_CFG_MPLL_MULTIPLIER_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_MPLL_MULTIPLIER, x)
+#define HSIO_MPLL_CFG_MPLL_MULTIPLIER_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_MPLL_MULTIPLIER, x)
+
+/* HSIO:SD:SD_STAT */
+#define HSIO_SD_STAT(g) __REG(TARGET_HSIO, 0, 1, 8, g, 3, 32, 12, 0, 1, 4)
+
+#define HSIO_SD_STAT_MPLL_STATE BIT(6)
+#define HSIO_SD_STAT_MPLL_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_MPLL_STATE, x)
+#define HSIO_SD_STAT_MPLL_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_MPLL_STATE, x)
+
+#define HSIO_SD_STAT_TX_STATE BIT(5)
+#define HSIO_SD_STAT_TX_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_TX_STATE, x)
+#define HSIO_SD_STAT_TX_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_TX_STATE, x)
+
+#define HSIO_SD_STAT_TX_CM_STATE BIT(2)
+#define HSIO_SD_STAT_TX_CM_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_TX_CM_STATE, x)
+#define HSIO_SD_STAT_TX_CM_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_TX_CM_STATE, x)
+
+#define HSIO_SD_STAT_RX_PLL_STATE BIT(0)
+#define HSIO_SD_STAT_RX_PLL_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_RX_PLL_STATE, x)
+#define HSIO_SD_STAT_RX_PLL_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_RX_PLL_STATE, x)
+
+/* HSIO:HW_CFGSTAT:HW_CFG */
+#define HSIO_HW_CFG __REG(TARGET_HSIO, 0, 1, 104, 0, 1, 52, 0, 0, 1, 4)
+
+#define HSIO_HW_CFG_RGMII_1_CFG BIT(15)
+#define HSIO_HW_CFG_RGMII_1_CFG_SET(x)\
+ (((x) << 15) & GENMASK(15, 15))
+#define HSIO_HW_CFG_RGMII_1_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_RGMII_1_CFG, x)
+
+#define HSIO_HW_CFG_RGMII_0_CFG BIT(14)
+#define HSIO_HW_CFG_RGMII_0_CFG_SET(x)\
+ (((x) << 14) & GENMASK(14, 14))
+#define HSIO_HW_CFG_RGMII_0_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_RGMII_0_CFG, x)
+
+#define HSIO_HW_CFG_RGMII_ENA GENMASK(13, 12)
+#define HSIO_HW_CFG_RGMII_ENA_SET(x)\
+ (((x) << 12) & GENMASK(13, 12))
+#define HSIO_HW_CFG_RGMII_ENA_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_RGMII_ENA, x)
+
+#define HSIO_HW_CFG_SD6G_0_CFG BIT(11)
+#define HSIO_HW_CFG_SD6G_0_CFG_SET(x)\
+ (((x) << 11) & GENMASK(11, 11))
+#define HSIO_HW_CFG_SD6G_0_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_SD6G_0_CFG, x)
+
+#define HSIO_HW_CFG_SD6G_1_CFG BIT(10)
+#define HSIO_HW_CFG_SD6G_1_CFG_SET(x)\
+ (((x) << 10) & GENMASK(10, 10))
+#define HSIO_HW_CFG_SD6G_1_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_SD6G_1_CFG, x)
+
+#define HSIO_HW_CFG_GMII_ENA GENMASK(9, 2)
+#define HSIO_HW_CFG_GMII_ENA_SET(x)\
+ (((x) << 2) & GENMASK(9, 2))
+#define HSIO_HW_CFG_GMII_ENA_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_GMII_ENA, x)
+
+#define HSIO_HW_CFG_QSGMII_ENA GENMASK(1, 0)
+#define HSIO_HW_CFG_QSGMII_ENA_SET(x)\
+ ((x) & GENMASK(1, 0))
+#define HSIO_HW_CFG_QSGMII_ENA_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_QSGMII_ENA, x)
+
+#endif /* _LAN966X_HSIO_REGS_H_ */
--
2.33.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 3/3] phy: Add lan966x ethernet serdes PHY driver
@ 2021-10-20 9:42 ` Horatiu Vultur
0 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-10-20 9:42 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Cc: Horatiu Vultur
Add the Microchip lan966x ethernet serdes PHY driver for interfaces
available in the lan966x SoC.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
drivers/phy/microchip/Kconfig | 8 +
drivers/phy/microchip/Makefile | 1 +
drivers/phy/microchip/lan966x_serdes.c | 548 ++++++++++++++++++++
drivers/phy/microchip/lan966x_serdes_regs.h | 209 ++++++++
4 files changed, 766 insertions(+)
create mode 100644 drivers/phy/microchip/lan966x_serdes.c
create mode 100644 drivers/phy/microchip/lan966x_serdes_regs.h
diff --git a/drivers/phy/microchip/Kconfig b/drivers/phy/microchip/Kconfig
index 3728a284bf64..38039ed0754c 100644
--- a/drivers/phy/microchip/Kconfig
+++ b/drivers/phy/microchip/Kconfig
@@ -11,3 +11,11 @@ config PHY_SPARX5_SERDES
depends on HAS_IOMEM
help
Enable this for support of the 10G/25G SerDes on Microchip Sparx5.
+
+config PHY_LAN966X_SERDES
+ tristate "SerDes PHY driver for Microchip LAN966X"
+ select GENERIC_PHY
+ depends on OF
+ depends on MFD_SYSCON
+ help
+ Enable this for supporting SerDes muxing with Microchip LAN966X
diff --git a/drivers/phy/microchip/Makefile b/drivers/phy/microchip/Makefile
index 7b98345712aa..fd73b87960a5 100644
--- a/drivers/phy/microchip/Makefile
+++ b/drivers/phy/microchip/Makefile
@@ -4,3 +4,4 @@
#
obj-$(CONFIG_PHY_SPARX5_SERDES) := sparx5_serdes.o
+obj-$(CONFIG_PHY_LAN966X_SERDES) := lan966x_serdes.o
diff --git a/drivers/phy/microchip/lan966x_serdes.c b/drivers/phy/microchip/lan966x_serdes.c
new file mode 100644
index 000000000000..262bb616b4bb
--- /dev/null
+++ b/drivers/phy/microchip/lan966x_serdes.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/phy/phy-lan966x-serdes.h>
+#include "lan966x_serdes_regs.h"
+
+#define PLL_CONF_MASK GENMASK(4, 3)
+#define PLL_CONF_25MHZ 0
+#define PLL_CONF_125MHZ 1
+#define PLL_CONF_SERDES_125MHZ 2
+#define PLL_CONF_BYPASS 3
+
+#define lan_offset_(id, tinst, tcnt, \
+ gbase, ginst, gcnt, gwidth, \
+ raddr, rinst, rcnt, rwidth) \
+ (gbase + ((ginst) * gwidth) + raddr + ((rinst) * rwidth))
+#define lan_offset(...) lan_offset_(__VA_ARGS__)
+
+#define lan_rmw(val, mask, reg, off) \
+ lan_rmw_(val, mask, reg, lan_offset(off))
+
+#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \
+ .idx = _idx, \
+ .port = _port, \
+ .mode = _mode, \
+ .submode = _submode, \
+ .mask = _mask, \
+ .mux = _mux, \
+}
+
+#define SERDES_MUX_GMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_GMII, m, c)
+#define SERDES_MUX_SGMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_SGMII, m, c)
+#define SERDES_MUX_QSGMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_QSGMII, m, c)
+#define SERDES_MUX_RGMII(i, p, m, c) \
+ SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_RGMII, m, c)
+
+static void lan_rmw_(u32 val, u32 mask, void __iomem *mem, u32 offset)
+{
+ u32 v;
+
+ v = readl(mem + offset);
+ v = (v & ~mask) | (val & mask);
+ writel(v, mem + offset);
+}
+
+struct serdes_mux {
+ u8 idx;
+ u8 port;
+ enum phy_mode mode;
+ int submode;
+ u32 mask;
+ u32 mux;
+};
+
+static const struct serdes_mux lan966x_serdes_muxes[] = {
+ SERDES_MUX_QSGMII(SERDES6G(1), 0, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_QSGMII(SERDES6G(1), 1, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_QSGMII(SERDES6G(1), 2, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_QSGMII(SERDES6G(1), 3, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(0))),
+
+ SERDES_MUX_QSGMII(SERDES6G(2), 4, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_QSGMII(SERDES6G(2), 5, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_QSGMII(SERDES6G(2), 6, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_QSGMII(SERDES6G(2), 7, HSIO_HW_CFG_QSGMII_ENA,
+ HSIO_HW_CFG_QSGMII_ENA_SET(BIT(1))),
+
+ SERDES_MUX_GMII(CU(0), 0, HSIO_HW_CFG_GMII_ENA,
+ HSIO_HW_CFG_GMII_ENA_SET(BIT(0))),
+ SERDES_MUX_GMII(CU(1), 1, HSIO_HW_CFG_GMII_ENA,
+ HSIO_HW_CFG_GMII_ENA_SET(BIT(1))),
+
+ SERDES_MUX_SGMII(SERDES6G(0), 0, HSIO_HW_CFG_SD6G_0_CFG, 0),
+ SERDES_MUX_SGMII(SERDES6G(1), 1, HSIO_HW_CFG_SD6G_1_CFG, 0),
+ SERDES_MUX_SGMII(SERDES6G(0), 2, HSIO_HW_CFG_SD6G_0_CFG,
+ HSIO_HW_CFG_SD6G_0_CFG_SET(1)),
+ SERDES_MUX_SGMII(SERDES6G(1), 3, HSIO_HW_CFG_SD6G_1_CFG,
+ HSIO_HW_CFG_SD6G_1_CFG_SET(1)),
+
+ SERDES_MUX_RGMII(RGMII(0), 2, HSIO_HW_CFG_RGMII_0_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_0_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_RGMII(RGMII(1), 3, HSIO_HW_CFG_RGMII_1_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_1_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(1))),
+ SERDES_MUX_RGMII(RGMII(0), 5, HSIO_HW_CFG_RGMII_0_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_0_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(0))),
+ SERDES_MUX_RGMII(RGMII(1), 6, HSIO_HW_CFG_RGMII_1_CFG |
+ HSIO_HW_CFG_RGMII_ENA,
+ HSIO_HW_CFG_RGMII_1_CFG_SET(BIT(0)) |
+ HSIO_HW_CFG_RGMII_ENA_SET(BIT(1))),
+};
+
+struct serdes_ctrl {
+ void __iomem *regs;
+ struct device *dev;
+ struct phy *phys[SERDES_MAX];
+ int ref125;
+};
+
+struct serdes_macro {
+ u8 idx;
+ int port;
+ struct serdes_ctrl *ctrl;
+ int speed;
+ phy_interface_t mode;
+};
+
+enum lan966x_sd6g40_mode {
+ LAN966X_SD6G40_MODE_QSGMII,
+ LAN966X_SD6G40_MODE_SGMII,
+};
+
+enum lan966x_sd6g40_ltx2rx {
+ LAN966X_SD6G40_TX2RX_LOOP_NONE,
+ LAN966X_SD6G40_LTX2RX
+};
+
+struct lan966x_sd6g40_setup_args {
+ enum lan966x_sd6g40_mode mode;
+ enum lan966x_sd6g40_ltx2rx tx2rx_loop;
+ bool txinvert;
+ bool rxinvert;
+ bool refclk125M;
+ bool mute;
+};
+
+struct lan966x_sd6g40_mode_args {
+ enum lan966x_sd6g40_mode mode;
+ u8 lane_10bit_sel;
+ u8 mpll_multiplier;
+ u8 ref_clkdiv2;
+ u8 tx_rate;
+ u8 rx_rate;
+};
+
+struct lan966x_sd6g40_setup {
+ u8 rx_term_en;
+ u8 lane_10bit_sel;
+ u8 tx_invert;
+ u8 rx_invert;
+ u8 mpll_multiplier;
+ u8 lane_loopbk_en;
+ u8 ref_clkdiv2;
+ u8 tx_rate;
+ u8 rx_rate;
+};
+
+static int lan966x_sd6g40_reg_cfg(struct serdes_macro *macro,
+ struct lan966x_sd6g40_setup *res_struct,
+ u32 idx)
+{
+ u32 value;
+
+ /* Note: SerDes HSIO is configured in 1G_LAN mode */
+ lan_rmw(HSIO_SD_CFG_LANE_10BIT_SEL_SET(res_struct->lane_10bit_sel) |
+ HSIO_SD_CFG_RX_RATE_SET(res_struct->rx_rate) |
+ HSIO_SD_CFG_TX_RATE_SET(res_struct->tx_rate) |
+ HSIO_SD_CFG_TX_INVERT_SET(res_struct->tx_invert) |
+ HSIO_SD_CFG_RX_INVERT_SET(res_struct->rx_invert) |
+ HSIO_SD_CFG_LANE_LOOPBK_EN_SET(res_struct->lane_loopbk_en) |
+ HSIO_SD_CFG_RX_RESET_SET(0) |
+ HSIO_SD_CFG_TX_RESET_SET(0),
+ HSIO_SD_CFG_LANE_10BIT_SEL |
+ HSIO_SD_CFG_RX_RATE |
+ HSIO_SD_CFG_TX_RATE |
+ HSIO_SD_CFG_TX_INVERT |
+ HSIO_SD_CFG_RX_INVERT |
+ HSIO_SD_CFG_LANE_LOOPBK_EN |
+ HSIO_SD_CFG_RX_RESET |
+ HSIO_SD_CFG_TX_RESET,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ lan_rmw(HSIO_MPLL_CFG_MPLL_MULTIPLIER_SET(res_struct->mpll_multiplier) |
+ HSIO_MPLL_CFG_REF_CLKDIV2_SET(res_struct->ref_clkdiv2),
+ HSIO_MPLL_CFG_MPLL_MULTIPLIER |
+ HSIO_MPLL_CFG_REF_CLKDIV2,
+ macro->ctrl->regs, HSIO_MPLL_CFG(idx));
+
+ lan_rmw(HSIO_SD_CFG_RX_TERM_EN_SET(res_struct->rx_term_en),
+ HSIO_SD_CFG_RX_TERM_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ lan_rmw(HSIO_MPLL_CFG_REF_SSP_EN_SET(1),
+ HSIO_MPLL_CFG_REF_SSP_EN,
+ macro->ctrl->regs, HSIO_MPLL_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ lan_rmw(HSIO_SD_CFG_PHY_RESET_SET(0),
+ HSIO_SD_CFG_PHY_RESET,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ lan_rmw(HSIO_MPLL_CFG_MPLL_EN_SET(1),
+ HSIO_MPLL_CFG_MPLL_EN,
+ macro->ctrl->regs, HSIO_MPLL_CFG(idx));
+
+ usleep_range(7 * USEC_PER_MSEC, 8 * USEC_PER_MSEC);
+
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_MPLL_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] mpll_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ lan_rmw(HSIO_SD_CFG_TX_CM_EN_SET(1),
+ HSIO_SD_CFG_TX_CM_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_TX_CM_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] tx_cm_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ lan_rmw(HSIO_SD_CFG_RX_PLL_EN_SET(1) |
+ HSIO_SD_CFG_TX_EN_SET(1),
+ HSIO_SD_CFG_RX_PLL_EN |
+ HSIO_SD_CFG_TX_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC);
+
+ /* Waiting for serdes 0 rx DPLL to lock... */
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_RX_PLL_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] rx_pll_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ /* Waiting for serdes 0 tx operational... */
+ value = readl(macro->ctrl->regs + lan_offset(HSIO_SD_STAT(idx)));
+ value = HSIO_SD_STAT_TX_STATE_GET(value);
+ if (value != 0x1) {
+ dev_err(macro->ctrl->dev,
+ "Unexpected sd_sd_stat[%u] tx_state was 0x1 but is 0x%x\n",
+ idx, value);
+ return -EIO;
+ }
+
+ lan_rmw(HSIO_SD_CFG_TX_DATA_EN_SET(1) |
+ HSIO_SD_CFG_RX_DATA_EN_SET(1),
+ HSIO_SD_CFG_TX_DATA_EN |
+ HSIO_SD_CFG_RX_DATA_EN,
+ macro->ctrl->regs, HSIO_SD_CFG(idx));
+
+ return 0;
+}
+
+static int lan966x_sd6g40_get_conf_from_mode(struct serdes_macro *macro,
+ enum lan966x_sd6g40_mode f_mode,
+ bool ref125M,
+ struct lan966x_sd6g40_mode_args *ret_val)
+{
+ switch (f_mode) {
+ case LAN966X_SD6G40_MODE_QSGMII:
+ ret_val->lane_10bit_sel = 0;
+ if (ref125M) {
+ ret_val->mpll_multiplier = 40;
+ ret_val->ref_clkdiv2 = 0x1;
+ ret_val->tx_rate = 0x0;
+ ret_val->rx_rate = 0x0;
+ } else {
+ ret_val->mpll_multiplier = 100;
+ ret_val->ref_clkdiv2 = 0x0;
+ ret_val->tx_rate = 0x0;
+ ret_val->rx_rate = 0x0;
+ }
+ break;
+
+ case LAN966X_SD6G40_MODE_SGMII:
+ ret_val->lane_10bit_sel = 1;
+ if (ref125M) {
+ ret_val->mpll_multiplier = macro->speed == SPEED_2500 ? 50 : 40;
+ ret_val->ref_clkdiv2 = 0x1;
+ ret_val->tx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ ret_val->rx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ } else {
+ ret_val->mpll_multiplier = macro->speed == SPEED_2500 ? 125 : 100;
+ ret_val->ref_clkdiv2 = 0x0;
+ ret_val->tx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ ret_val->rx_rate = macro->speed == SPEED_2500 ? 0x1 : 0x2;
+ }
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int lan966x_calc_sd6g40_setup_lane(struct serdes_macro *macro,
+ struct lan966x_sd6g40_setup_args config,
+ struct lan966x_sd6g40_setup *ret_val)
+{
+ struct lan966x_sd6g40_mode_args sd6g40_mode;
+ struct lan966x_sd6g40_mode_args *mode_args = &sd6g40_mode;
+ int ret;
+
+ ret = lan966x_sd6g40_get_conf_from_mode(macro, config.mode,
+ config.refclk125M, mode_args);
+ if (ret)
+ return ret;
+
+ ret_val->lane_10bit_sel = mode_args->lane_10bit_sel;
+ ret_val->rx_rate = mode_args->rx_rate;
+ ret_val->tx_rate = mode_args->tx_rate;
+ ret_val->mpll_multiplier = mode_args->mpll_multiplier;
+ ret_val->ref_clkdiv2 = mode_args->ref_clkdiv2;
+ ret_val->rx_term_en = 0;
+
+ if (config.tx2rx_loop == LAN966X_SD6G40_LTX2RX)
+ ret_val->lane_loopbk_en = 1;
+ else
+ ret_val->lane_loopbk_en = 0;
+
+ ret_val->tx_invert = !!config.txinvert;
+ ret_val->rx_invert = !!config.rxinvert;
+
+ return 0;
+}
+
+static int lan966x_sd6g40_setup_lane(struct serdes_macro *macro,
+ struct lan966x_sd6g40_setup_args config,
+ u32 idx)
+{
+ struct lan966x_sd6g40_setup calc_results = {};
+ int ret;
+
+ ret = lan966x_calc_sd6g40_setup_lane(macro, config, &calc_results);
+ if (ret)
+ return ret;
+
+ return lan966x_sd6g40_reg_cfg(macro, &calc_results, idx);
+}
+
+static int lan966x_sd6g40_setup(struct serdes_macro *macro, u32 idx, int mode)
+{
+ struct lan966x_sd6g40_setup_args conf = {};
+
+ conf.refclk125M = macro->ctrl->ref125;
+
+ if (mode == PHY_INTERFACE_MODE_QSGMII)
+ conf.mode = LAN966X_SD6G40_MODE_QSGMII;
+ else
+ conf.mode = LAN966X_SD6G40_MODE_SGMII;
+
+ return lan966x_sd6g40_setup_lane(macro, conf, idx);
+}
+
+static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct serdes_macro *macro = phy_get_drvdata(phy);
+ unsigned int i;
+ int val;
+
+ /* As of now only PHY_MODE_ETHERNET is supported */
+ if (mode != PHY_MODE_ETHERNET)
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < ARRAY_SIZE(lan966x_serdes_muxes); i++) {
+ if (macro->idx != lan966x_serdes_muxes[i].idx ||
+ mode != lan966x_serdes_muxes[i].mode ||
+ submode != lan966x_serdes_muxes[i].submode ||
+ macro->port != lan966x_serdes_muxes[i].port)
+ continue;
+
+ val = readl(macro->ctrl->regs + lan_offset(HSIO_HW_CFG));
+ val |= lan966x_serdes_muxes[i].mux;
+ lan_rmw(val, lan966x_serdes_muxes[i].mask,
+ macro->ctrl->regs, HSIO_HW_CFG);
+
+ macro->mode = lan966x_serdes_muxes[i].submode;
+
+ if (macro->idx < CU_MAX)
+ return 0;
+
+ if (macro->idx < SERDES6G_MAX)
+ return lan966x_sd6g40_setup(macro,
+ macro->idx - (CU_MAX + 1),
+ macro->mode);
+
+ if (macro->idx < RGMII_MAX)
+ return 0;
+
+ return -EOPNOTSUPP;
+ }
+
+ return -EINVAL;
+}
+
+static int serdes_set_speed(struct phy *phy, int speed)
+{
+ struct serdes_macro *macro = phy_get_drvdata(phy);
+
+ macro->speed = speed;
+
+ return lan966x_sd6g40_setup(macro, macro->idx - (CU_MAX + 1),
+ macro->mode);
+}
+
+static const struct phy_ops serdes_ops = {
+ .set_mode = serdes_set_mode,
+ .set_speed = serdes_set_speed,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *serdes_simple_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct serdes_ctrl *ctrl = dev_get_drvdata(dev);
+ unsigned int port, idx, i;
+
+ if (args->args_count != 2)
+ return ERR_PTR(-EINVAL);
+
+ port = args->args[0];
+ idx = args->args[1];
+
+ for (i = 0; i < SERDES_MAX; i++) {
+ struct serdes_macro *macro = phy_get_drvdata(ctrl->phys[i]);
+
+ if (idx != macro->idx)
+ continue;
+
+ macro->port = port;
+ return ctrl->phys[i];
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+static int serdes_phy_create(struct serdes_ctrl *ctrl, u8 idx, struct phy **phy)
+{
+ struct serdes_macro *macro;
+
+ *phy = devm_phy_create(ctrl->dev, NULL, &serdes_ops);
+ if (IS_ERR(*phy))
+ return PTR_ERR(*phy);
+
+ macro = devm_kzalloc(ctrl->dev, sizeof(*macro), GFP_KERNEL);
+ if (!macro)
+ return -ENOMEM;
+
+ macro->idx = idx;
+ macro->ctrl = ctrl;
+ macro->speed = SPEED_1000;
+ macro->port = -1;
+
+ phy_set_drvdata(*phy, macro);
+
+ return 0;
+}
+
+static int serdes_probe(struct platform_device *pdev)
+{
+ struct phy_provider *provider;
+ struct serdes_ctrl *ctrl;
+ void __iomem *hw_stat;
+ unsigned int i;
+ u32 val;
+ int ret;
+
+ ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ ctrl->dev = &pdev->dev;
+ ctrl->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(ctrl->regs))
+ return PTR_ERR(ctrl->regs);
+
+ hw_stat = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
+ if (IS_ERR(hw_stat))
+ return PTR_ERR(hw_stat);
+
+ for (i = 0; i < SERDES_MAX; i++) {
+ ret = serdes_phy_create(ctrl, i, &ctrl->phys[i]);
+ if (ret)
+ return ret;
+ }
+
+ val = readl(hw_stat);
+ val = FIELD_GET(PLL_CONF_MASK, val);
+ ctrl->ref125 = (val == PLL_CONF_125MHZ ||
+ val == PLL_CONF_SERDES_125MHZ);
+
+ dev_set_drvdata(&pdev->dev, ctrl);
+
+ provider = devm_of_phy_provider_register(ctrl->dev,
+ serdes_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id serdes_ids[] = {
+ { .compatible = "microchip,lan966x-serdes", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, serdes_ids);
+
+static struct platform_driver mscc_lan966x_serdes = {
+ .probe = serdes_probe,
+ .driver = {
+ .name = "microchip,lan966x-serdes",
+ .of_match_table = of_match_ptr(serdes_ids),
+ },
+};
+
+module_platform_driver(mscc_lan966x_serdes);
+
+MODULE_DESCRIPTION("Microchip lan966x switch serdes driver");
+MODULE_AUTHOR("Horatiu Vultur <horatiu.vultur@microchip.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/microchip/lan966x_serdes_regs.h b/drivers/phy/microchip/lan966x_serdes_regs.h
new file mode 100644
index 000000000000..ea30f64ffd5c
--- /dev/null
+++ b/drivers/phy/microchip/lan966x_serdes_regs.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _LAN966X_SERDES_REGS_H_
+#define _LAN966X_SERDES_REGS_H_
+
+#include <linux/bitfield.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+
+enum lan966x_target {
+ TARGET_HSIO = 32,
+ NUM_TARGETS = 66
+};
+
+#define __REG(...) __VA_ARGS__
+
+/* HSIO:SD:SD_CFG */
+#define HSIO_SD_CFG(g) __REG(TARGET_HSIO, 0, 1, 8, g, 3, 32, 0, 0, 1, 4)
+
+#define HSIO_SD_CFG_PHY_RESET BIT(27)
+#define HSIO_SD_CFG_PHY_RESET_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_PHY_RESET, x)
+#define HSIO_SD_CFG_PHY_RESET_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_PHY_RESET, x)
+
+#define HSIO_SD_CFG_TX_RESET BIT(18)
+#define HSIO_SD_CFG_TX_RESET_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_RESET, x)
+#define HSIO_SD_CFG_TX_RESET_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_RESET, x)
+
+#define HSIO_SD_CFG_TX_RATE GENMASK(17, 16)
+#define HSIO_SD_CFG_TX_RATE_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_RATE, x)
+#define HSIO_SD_CFG_TX_RATE_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_RATE, x)
+
+#define HSIO_SD_CFG_TX_INVERT BIT(15)
+#define HSIO_SD_CFG_TX_INVERT_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_INVERT, x)
+#define HSIO_SD_CFG_TX_INVERT_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_INVERT, x)
+
+#define HSIO_SD_CFG_TX_EN BIT(14)
+#define HSIO_SD_CFG_TX_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_EN, x)
+#define HSIO_SD_CFG_TX_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_EN, x)
+
+#define HSIO_SD_CFG_TX_DATA_EN BIT(12)
+#define HSIO_SD_CFG_TX_DATA_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_DATA_EN, x)
+#define HSIO_SD_CFG_TX_DATA_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_DATA_EN, x)
+
+#define HSIO_SD_CFG_TX_CM_EN BIT(11)
+#define HSIO_SD_CFG_TX_CM_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_TX_CM_EN, x)
+#define HSIO_SD_CFG_TX_CM_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_TX_CM_EN, x)
+
+#define HSIO_SD_CFG_LANE_10BIT_SEL BIT(10)
+#define HSIO_SD_CFG_LANE_10BIT_SEL_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_LANE_10BIT_SEL, x)
+#define HSIO_SD_CFG_LANE_10BIT_SEL_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_LANE_10BIT_SEL, x)
+
+#define HSIO_SD_CFG_RX_TERM_EN BIT(9)
+#define HSIO_SD_CFG_RX_TERM_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_TERM_EN, x)
+#define HSIO_SD_CFG_RX_TERM_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_TERM_EN, x)
+
+#define HSIO_SD_CFG_RX_RESET BIT(8)
+#define HSIO_SD_CFG_RX_RESET_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_RESET, x)
+#define HSIO_SD_CFG_RX_RESET_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_RESET, x)
+
+#define HSIO_SD_CFG_RX_RATE GENMASK(7, 6)
+#define HSIO_SD_CFG_RX_RATE_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_RATE, x)
+#define HSIO_SD_CFG_RX_RATE_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_RATE, x)
+
+#define HSIO_SD_CFG_RX_PLL_EN BIT(5)
+#define HSIO_SD_CFG_RX_PLL_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_PLL_EN, x)
+#define HSIO_SD_CFG_RX_PLL_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_PLL_EN, x)
+
+#define HSIO_SD_CFG_RX_INVERT BIT(3)
+#define HSIO_SD_CFG_RX_INVERT_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_INVERT, x)
+#define HSIO_SD_CFG_RX_INVERT_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_INVERT, x)
+
+#define HSIO_SD_CFG_RX_DATA_EN BIT(2)
+#define HSIO_SD_CFG_RX_DATA_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_RX_DATA_EN, x)
+#define HSIO_SD_CFG_RX_DATA_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_RX_DATA_EN, x)
+
+#define HSIO_SD_CFG_LANE_LOOPBK_EN BIT(0)
+#define HSIO_SD_CFG_LANE_LOOPBK_EN_SET(x)\
+ FIELD_PREP(HSIO_SD_CFG_LANE_LOOPBK_EN, x)
+#define HSIO_SD_CFG_LANE_LOOPBK_EN_GET(x)\
+ FIELD_GET(HSIO_SD_CFG_LANE_LOOPBK_EN, x)
+
+/* HSIO:SD:MPLL_CFG */
+#define HSIO_MPLL_CFG(g) __REG(TARGET_HSIO, 0, 1, 8, g, 3, 32, 8, 0, 1, 4)
+
+#define HSIO_MPLL_CFG_REF_SSP_EN BIT(18)
+#define HSIO_MPLL_CFG_REF_SSP_EN_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_REF_SSP_EN, x)
+#define HSIO_MPLL_CFG_REF_SSP_EN_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_REF_SSP_EN, x)
+
+#define HSIO_MPLL_CFG_REF_CLKDIV2 BIT(17)
+#define HSIO_MPLL_CFG_REF_CLKDIV2_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_REF_CLKDIV2, x)
+#define HSIO_MPLL_CFG_REF_CLKDIV2_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_REF_CLKDIV2, x)
+
+#define HSIO_MPLL_CFG_MPLL_EN BIT(16)
+#define HSIO_MPLL_CFG_MPLL_EN_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_MPLL_EN, x)
+#define HSIO_MPLL_CFG_MPLL_EN_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_MPLL_EN, x)
+
+#define HSIO_MPLL_CFG_MPLL_MULTIPLIER GENMASK(6, 0)
+#define HSIO_MPLL_CFG_MPLL_MULTIPLIER_SET(x)\
+ FIELD_PREP(HSIO_MPLL_CFG_MPLL_MULTIPLIER, x)
+#define HSIO_MPLL_CFG_MPLL_MULTIPLIER_GET(x)\
+ FIELD_GET(HSIO_MPLL_CFG_MPLL_MULTIPLIER, x)
+
+/* HSIO:SD:SD_STAT */
+#define HSIO_SD_STAT(g) __REG(TARGET_HSIO, 0, 1, 8, g, 3, 32, 12, 0, 1, 4)
+
+#define HSIO_SD_STAT_MPLL_STATE BIT(6)
+#define HSIO_SD_STAT_MPLL_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_MPLL_STATE, x)
+#define HSIO_SD_STAT_MPLL_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_MPLL_STATE, x)
+
+#define HSIO_SD_STAT_TX_STATE BIT(5)
+#define HSIO_SD_STAT_TX_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_TX_STATE, x)
+#define HSIO_SD_STAT_TX_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_TX_STATE, x)
+
+#define HSIO_SD_STAT_TX_CM_STATE BIT(2)
+#define HSIO_SD_STAT_TX_CM_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_TX_CM_STATE, x)
+#define HSIO_SD_STAT_TX_CM_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_TX_CM_STATE, x)
+
+#define HSIO_SD_STAT_RX_PLL_STATE BIT(0)
+#define HSIO_SD_STAT_RX_PLL_STATE_SET(x)\
+ FIELD_PREP(HSIO_SD_STAT_RX_PLL_STATE, x)
+#define HSIO_SD_STAT_RX_PLL_STATE_GET(x)\
+ FIELD_GET(HSIO_SD_STAT_RX_PLL_STATE, x)
+
+/* HSIO:HW_CFGSTAT:HW_CFG */
+#define HSIO_HW_CFG __REG(TARGET_HSIO, 0, 1, 104, 0, 1, 52, 0, 0, 1, 4)
+
+#define HSIO_HW_CFG_RGMII_1_CFG BIT(15)
+#define HSIO_HW_CFG_RGMII_1_CFG_SET(x)\
+ (((x) << 15) & GENMASK(15, 15))
+#define HSIO_HW_CFG_RGMII_1_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_RGMII_1_CFG, x)
+
+#define HSIO_HW_CFG_RGMII_0_CFG BIT(14)
+#define HSIO_HW_CFG_RGMII_0_CFG_SET(x)\
+ (((x) << 14) & GENMASK(14, 14))
+#define HSIO_HW_CFG_RGMII_0_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_RGMII_0_CFG, x)
+
+#define HSIO_HW_CFG_RGMII_ENA GENMASK(13, 12)
+#define HSIO_HW_CFG_RGMII_ENA_SET(x)\
+ (((x) << 12) & GENMASK(13, 12))
+#define HSIO_HW_CFG_RGMII_ENA_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_RGMII_ENA, x)
+
+#define HSIO_HW_CFG_SD6G_0_CFG BIT(11)
+#define HSIO_HW_CFG_SD6G_0_CFG_SET(x)\
+ (((x) << 11) & GENMASK(11, 11))
+#define HSIO_HW_CFG_SD6G_0_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_SD6G_0_CFG, x)
+
+#define HSIO_HW_CFG_SD6G_1_CFG BIT(10)
+#define HSIO_HW_CFG_SD6G_1_CFG_SET(x)\
+ (((x) << 10) & GENMASK(10, 10))
+#define HSIO_HW_CFG_SD6G_1_CFG_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_SD6G_1_CFG, x)
+
+#define HSIO_HW_CFG_GMII_ENA GENMASK(9, 2)
+#define HSIO_HW_CFG_GMII_ENA_SET(x)\
+ (((x) << 2) & GENMASK(9, 2))
+#define HSIO_HW_CFG_GMII_ENA_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_GMII_ENA, x)
+
+#define HSIO_HW_CFG_QSGMII_ENA GENMASK(1, 0)
+#define HSIO_HW_CFG_QSGMII_ENA_SET(x)\
+ ((x) & GENMASK(1, 0))
+#define HSIO_HW_CFG_QSGMII_ENA_GET(x)\
+ FIELD_GET(HSIO_HW_CFG_QSGMII_ENA, x)
+
+#endif /* _LAN966X_HSIO_REGS_H_ */
--
2.33.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: phy: Add lan966x-serdes binding
2021-10-20 9:42 ` Horatiu Vultur
@ 2021-10-27 20:37 ` Rob Herring
-1 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2021-10-27 20:37 UTC (permalink / raw)
To: Horatiu Vultur
Cc: devicetree, andrew, alexandre.belloni, linux-phy, vkoul, robh+dt,
kishon, linux-kernel
On Wed, 20 Oct 2021 11:42:27 +0200, Horatiu Vultur wrote:
> Document the lan966x ethernet serdes phy driver bindings.
>
> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> ---
> .../phy/microchip,lan966x-serdes.yaml | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: phy: Add lan966x-serdes binding
@ 2021-10-27 20:37 ` Rob Herring
0 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2021-10-27 20:37 UTC (permalink / raw)
To: Horatiu Vultur
Cc: devicetree, andrew, alexandre.belloni, linux-phy, vkoul, robh+dt,
kishon, linux-kernel
On Wed, 20 Oct 2021 11:42:27 +0200, Horatiu Vultur wrote:
> Document the lan966x ethernet serdes phy driver bindings.
>
> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> ---
> .../phy/microchip,lan966x-serdes.yaml | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 2/3] dt-bindings: phy: Add constants for lan966x serdes
2021-10-20 9:42 ` Horatiu Vultur
@ 2021-10-27 20:37 ` Rob Herring
-1 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2021-10-27 20:37 UTC (permalink / raw)
To: Horatiu Vultur
Cc: kishon, andrew, devicetree, linux-phy, robh+dt,
alexandre.belloni, vkoul, linux-kernel
On Wed, 20 Oct 2021 11:42:28 +0200, Horatiu Vultur wrote:
> Lan966x has: 2 integrated PHYs, 3 SerDes and 2 RGMII interfaces. Which
> requires to be muxed based on the HW representation.
>
> So add constants for each interface to be able to distinguish them.
>
> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> ---
> include/dt-bindings/phy/phy-lan966x-serdes.h | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
> create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 2/3] dt-bindings: phy: Add constants for lan966x serdes
@ 2021-10-27 20:37 ` Rob Herring
0 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2021-10-27 20:37 UTC (permalink / raw)
To: Horatiu Vultur
Cc: kishon, andrew, devicetree, linux-phy, robh+dt,
alexandre.belloni, vkoul, linux-kernel
On Wed, 20 Oct 2021 11:42:28 +0200, Horatiu Vultur wrote:
> Lan966x has: 2 integrated PHYs, 3 SerDes and 2 RGMII interfaces. Which
> requires to be muxed based on the HW representation.
>
> So add constants for each interface to be able to distinguish them.
>
> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
> ---
> include/dt-bindings/phy/phy-lan966x-serdes.h | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
> create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
>
Reviewed-by: Rob Herring <robh@kernel.org>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 0/3] phy: Add driver for lan966x Serdes driver
2021-10-20 9:42 ` Horatiu Vultur
@ 2021-11-04 8:58 ` Horatiu Vultur
-1 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-11-04 8:58 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Hi Kishon, Vinod,
Please let me know if you have more comments to this patch series.
Do you think it would be possible to get it in 5.16?
The 10/20/2021 11:42, Horatiu Vultur wrote:
> This patch serie adds support for Microchip lan966x serdes. The lan966x
> device contains has 7 interfaces, consisting of 2 copper transceivers,
> 3 Serdes and 2 RGMII interfaces. Two of the Serdes support QSGMII.
> The driver also adds the functionality of "muxing" the interfaces to
> different logical ports.
>
> The following table shows which interfaces can be supported by the port.
>
> PortNumber Max Speed Ethernet interface options
> 0 1Gbps CuPHY, 1G SGMII or QSGMII
> 1 1Gbps CuPHY, 1G SGMII or QSGMII
> 2 2.5Gbps 2.5G SGMII, QSGMII, RGMII
> 3 2.5Gbps 2.5G SGMII, QSGMII, RGMII
> 4 2.5Gbps 2.5G SGMII, QSGMII
> 5 1Gbps QSGMII, RGMII
> 6 1Gbps QSGMII, RGMII
> 7 1Gbps QSGMII
>
> v3->v4:
> - update description of the driver
> - removed unused registers
> - use bitfield operations in the registers
> - add macros for PLL configuration
> - move macros and structs at the top of the file
>
> v2->v3:
> - remove unused includes
> - add missing '...' in microchip,lan966x-serdes.yaml
> - rename lan966x-serdes.h to phy-lan966x-serdes.h
> - Rename CU->PHY and RG->RGMII
> - update commit message for PATCH 2
>
> v1->v2:
> - replace the regmap with iomem
> - update DT bindings
>
>
> Horatiu Vultur (3):
> dt-bindings: phy: Add lan966x-serdes binding
> dt-bindings: phy: Add constants for lan966x serdes
> phy: Add lan966x ethernet serdes PHY driver
>
> .../phy/microchip,lan966x-serdes.yaml | 59 ++
> drivers/phy/microchip/Kconfig | 8 +
> drivers/phy/microchip/Makefile | 1 +
> drivers/phy/microchip/lan966x_serdes.c | 548 ++++++++++++++++++
> drivers/phy/microchip/lan966x_serdes_regs.h | 209 +++++++
> include/dt-bindings/phy/phy-lan966x-serdes.h | 14 +
> 6 files changed, 839 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
> create mode 100644 drivers/phy/microchip/lan966x_serdes.c
> create mode 100644 drivers/phy/microchip/lan966x_serdes_regs.h
> create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
>
> --
> 2.33.0
>
--
/Horatiu
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 0/3] phy: Add driver for lan966x Serdes driver
@ 2021-11-04 8:58 ` Horatiu Vultur
0 siblings, 0 replies; 14+ messages in thread
From: Horatiu Vultur @ 2021-11-04 8:58 UTC (permalink / raw)
To: kishon, vkoul, robh+dt, andrew, alexandre.belloni, linux-phy,
devicetree, linux-kernel
Hi Kishon, Vinod,
Please let me know if you have more comments to this patch series.
Do you think it would be possible to get it in 5.16?
The 10/20/2021 11:42, Horatiu Vultur wrote:
> This patch serie adds support for Microchip lan966x serdes. The lan966x
> device contains has 7 interfaces, consisting of 2 copper transceivers,
> 3 Serdes and 2 RGMII interfaces. Two of the Serdes support QSGMII.
> The driver also adds the functionality of "muxing" the interfaces to
> different logical ports.
>
> The following table shows which interfaces can be supported by the port.
>
> PortNumber Max Speed Ethernet interface options
> 0 1Gbps CuPHY, 1G SGMII or QSGMII
> 1 1Gbps CuPHY, 1G SGMII or QSGMII
> 2 2.5Gbps 2.5G SGMII, QSGMII, RGMII
> 3 2.5Gbps 2.5G SGMII, QSGMII, RGMII
> 4 2.5Gbps 2.5G SGMII, QSGMII
> 5 1Gbps QSGMII, RGMII
> 6 1Gbps QSGMII, RGMII
> 7 1Gbps QSGMII
>
> v3->v4:
> - update description of the driver
> - removed unused registers
> - use bitfield operations in the registers
> - add macros for PLL configuration
> - move macros and structs at the top of the file
>
> v2->v3:
> - remove unused includes
> - add missing '...' in microchip,lan966x-serdes.yaml
> - rename lan966x-serdes.h to phy-lan966x-serdes.h
> - Rename CU->PHY and RG->RGMII
> - update commit message for PATCH 2
>
> v1->v2:
> - replace the regmap with iomem
> - update DT bindings
>
>
> Horatiu Vultur (3):
> dt-bindings: phy: Add lan966x-serdes binding
> dt-bindings: phy: Add constants for lan966x serdes
> phy: Add lan966x ethernet serdes PHY driver
>
> .../phy/microchip,lan966x-serdes.yaml | 59 ++
> drivers/phy/microchip/Kconfig | 8 +
> drivers/phy/microchip/Makefile | 1 +
> drivers/phy/microchip/lan966x_serdes.c | 548 ++++++++++++++++++
> drivers/phy/microchip/lan966x_serdes_regs.h | 209 +++++++
> include/dt-bindings/phy/phy-lan966x-serdes.h | 14 +
> 6 files changed, 839 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
> create mode 100644 drivers/phy/microchip/lan966x_serdes.c
> create mode 100644 drivers/phy/microchip/lan966x_serdes_regs.h
> create mode 100644 include/dt-bindings/phy/phy-lan966x-serdes.h
>
> --
> 2.33.0
>
--
/Horatiu
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-11-04 8:57 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-20 9:42 [PATCH v4 0/3] phy: Add driver for lan966x Serdes driver Horatiu Vultur
2021-10-20 9:42 ` Horatiu Vultur
2021-10-20 9:42 ` [PATCH v4 1/3] dt-bindings: phy: Add lan966x-serdes binding Horatiu Vultur
2021-10-20 9:42 ` Horatiu Vultur
2021-10-27 20:37 ` Rob Herring
2021-10-27 20:37 ` Rob Herring
2021-10-20 9:42 ` [PATCH v4 2/3] dt-bindings: phy: Add constants for lan966x serdes Horatiu Vultur
2021-10-20 9:42 ` Horatiu Vultur
2021-10-27 20:37 ` Rob Herring
2021-10-27 20:37 ` Rob Herring
2021-10-20 9:42 ` [PATCH v4 3/3] phy: Add lan966x ethernet serdes PHY driver Horatiu Vultur
2021-10-20 9:42 ` Horatiu Vultur
2021-11-04 8:58 ` [PATCH v4 0/3] phy: Add driver for lan966x Serdes driver Horatiu Vultur
2021-11-04 8:58 ` Horatiu Vultur
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.