[PATCH 0/2] mtd: spi-nor: Erase fixes

[PATCH 0/2] mtd: spi-nor: Erase fixes

[Tudor Ambarus]

Depends on:
https://lore.kernel.org/all/20211029172633.886453-19-tudor.ambarus@microchip.com/T/

Tudor Ambarus (2):
  mtd: spi-nor: Fix shift-out-of-bounds
  mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

 drivers/mtd/spi-nor/core.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

-- 
2.25.1

[PATCH 0/2] mtd: spi-nor: Erase fixes

[Tudor Ambarus]

Depends on:
https://lore.kernel.org/all/20211029172633.886453-19-tudor.ambarus@microchip.com/T/

Tudor Ambarus (2):
  mtd: spi-nor: Fix shift-out-of-bounds
  mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

 drivers/mtd/spi-nor/core.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Tudor Ambarus]

When paring SFDP we may choose to mask out an erase type, passing
an erase size of zero to spi_nor_set_erase_type().
Fix shift-out-of-bounds and just clear the erase params when
passing zero for erase size.
While here avoid a superfluous dereference and use 'size' directly.

UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent 4294967295 is too large for 32-bit type 'int'

Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 3d97c189c332..a1b5d5432f41 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
 	erase->size = size;
 	erase->opcode = opcode;
 	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
-	erase->size_shift = ffs(erase->size) - 1;
-	erase->size_mask = (1 << erase->size_shift) - 1;
+	if (size) {
+		erase->size_shift = ffs(size) - 1;
+		erase->size_mask = (1 << erase->size_shift) - 1;
+	} else {
+		erase->size_shift = 0;
+		erase->size_mask = 0;
+	}
 }
 
 /**
-- 
2.25.1

[PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Tudor Ambarus]

When paring SFDP we may choose to mask out an erase type, passing
an erase size of zero to spi_nor_set_erase_type().
Fix shift-out-of-bounds and just clear the erase params when
passing zero for erase size.
While here avoid a superfluous dereference and use 'size' directly.

UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent 4294967295 is too large for 32-bit type 'int'

Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 3d97c189c332..a1b5d5432f41 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
 	erase->size = size;
 	erase->opcode = opcode;
 	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
-	erase->size_shift = ffs(erase->size) - 1;
-	erase->size_mask = (1 << erase->size_shift) - 1;
+	if (size) {
+		erase->size_shift = ffs(size) - 1;
+		erase->size_mask = (1 << erase->size_shift) - 1;
+	} else {
+		erase->size_shift = 0;
+		erase->size_mask = 0;
+	}
 }
 
 /**
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: (EXT) [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Stein, Alexander]

Am Samstag, dem 06.11.2021 um 09:56 +0200 schrieb Tudor Ambarus:
> When paring SFDP we may choose to mask out an erase type, passing
> an erase size of zero to spi_nor_set_erase_type().
> Fix shift-out-of-bounds and just clear the erase params when
> passing zero for erase size.
> While here avoid a superfluous dereference and use 'size' directly.
> 
> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> shift exponent 4294967295 is too large for 32-bit type 'int'
> 
> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP
> SPI NOR flash memories")
> Reported-by: Alexander Stein <
> Alexander.Stein@tq-group.com
> >
> Signed-off-by: Tudor Ambarus <
> tudor.ambarus@microchip.com
> >
> ---
>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 3d97c189c332..a1b5d5432f41 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct
> spi_nor_erase_type *erase, u32 size,
>  	erase->size = size;
>  	erase->opcode = opcode;
>  	/* JEDEC JESD216B Standard imposes erase sizes to be power of
> 2. */
> -	erase->size_shift = ffs(erase->size) - 1;
> -	erase->size_mask = (1 << erase->size_shift) - 1;
> +	if (size) {
> +		erase->size_shift = ffs(size) - 1;
> +		erase->size_mask = (1 << erase->size_shift) - 1;
> +	} else {
> +		erase->size_shift = 0;
> +		erase->size_mask = 0;
> +	}
>  }
>  
>  /**

Tested-By: Alexander Stein <Alexander.Stein@tq-group.com>

It fixes the UBSAN error and my spi-nor flash can still be detected.

Best regards,
Alexander

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: (EXT) [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Stein, Alexander]

Am Samstag, dem 06.11.2021 um 09:56 +0200 schrieb Tudor Ambarus:
> When paring SFDP we may choose to mask out an erase type, passing
> an erase size of zero to spi_nor_set_erase_type().
> Fix shift-out-of-bounds and just clear the erase params when
> passing zero for erase size.
> While here avoid a superfluous dereference and use 'size' directly.
> 
> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> shift exponent 4294967295 is too large for 32-bit type 'int'
> 
> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP
> SPI NOR flash memories")
> Reported-by: Alexander Stein <
> Alexander.Stein@tq-group.com
> >
> Signed-off-by: Tudor Ambarus <
> tudor.ambarus@microchip.com
> >
> ---
>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 3d97c189c332..a1b5d5432f41 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct
> spi_nor_erase_type *erase, u32 size,
>  	erase->size = size;
>  	erase->opcode = opcode;
>  	/* JEDEC JESD216B Standard imposes erase sizes to be power of
> 2. */
> -	erase->size_shift = ffs(erase->size) - 1;
> -	erase->size_mask = (1 << erase->size_shift) - 1;
> +	if (size) {
> +		erase->size_shift = ffs(size) - 1;
> +		erase->size_mask = (1 << erase->size_shift) - 1;
> +	} else {
> +		erase->size_shift = 0;
> +		erase->size_mask = 0;
> +	}
>  }
>  
>  /**

Tested-By: Alexander Stein <Alexander.Stein@tq-group.com>

It fixes the UBSAN error and my spi-nor flash can still be detected.

Best regards,
Alexander

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Pratyush Yadav]

On 06/11/21 09:56AM, Tudor Ambarus wrote:
> When paring SFDP we may choose to mask out an erase type, passing
> an erase size of zero to spi_nor_set_erase_type().
> Fix shift-out-of-bounds and just clear the erase params when
> passing zero for erase size.
> While here avoid a superfluous dereference and use 'size' directly.
> 
> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> shift exponent 4294967295 is too large for 32-bit type 'int'
> 
> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
> Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 3d97c189c332..a1b5d5432f41 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
>  	erase->size = size;
>  	erase->opcode = opcode;
>  	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */

The change itself looks fine to me. So,

Reviewed-by: Pratyush Yadav <p.yadav@ti.com>

But I wonder if this code is doing the right thing. If a flash is 
setting an incorrect erase size, shouldn't we fail loudly to make sure 
the error is corrected, instead of working around it silently?

If you don't want to return an error here, how about:

	WARN_ON(ffs(size) != fls(size))

or even a dev_warn() print so the programmer is aware of this.

> -	erase->size_shift = ffs(erase->size) - 1;
> -	erase->size_mask = (1 << erase->size_shift) - 1;
> +	if (size) {
> +		erase->size_shift = ffs(size) - 1;
> +		erase->size_mask = (1 << erase->size_shift) - 1;
> +	} else {
> +		erase->size_shift = 0;
> +		erase->size_mask = 0;
> +	}
>  }
>  
>  /**
> -- 
> 2.25.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Pratyush Yadav]

On 06/11/21 09:56AM, Tudor Ambarus wrote:
> When paring SFDP we may choose to mask out an erase type, passing
> an erase size of zero to spi_nor_set_erase_type().
> Fix shift-out-of-bounds and just clear the erase params when
> passing zero for erase size.
> While here avoid a superfluous dereference and use 'size' directly.
> 
> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> shift exponent 4294967295 is too large for 32-bit type 'int'
> 
> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
> Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 3d97c189c332..a1b5d5432f41 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
>  	erase->size = size;
>  	erase->opcode = opcode;
>  	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */

The change itself looks fine to me. So,

Reviewed-by: Pratyush Yadav <p.yadav@ti.com>

But I wonder if this code is doing the right thing. If a flash is 
setting an incorrect erase size, shouldn't we fail loudly to make sure 
the error is corrected, instead of working around it silently?

If you don't want to return an error here, how about:

	WARN_ON(ffs(size) != fls(size))

or even a dev_warn() print so the programmer is aware of this.

> -	erase->size_shift = ffs(erase->size) - 1;
> -	erase->size_mask = (1 << erase->size_shift) - 1;
> +	if (size) {
> +		erase->size_shift = ffs(size) - 1;
> +		erase->size_mask = (1 << erase->size_shift) - 1;
> +	} else {
> +		erase->size_shift = 0;
> +		erase->size_mask = 0;
> +	}
>  }
>  
>  /**
> -- 
> 2.25.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Alexander Stein]

Hello,

Am Samstag, 6. November 2021, 08:56:15 CET schrieb Tudor Ambarus:
> When paring SFDP we may choose to mask out an erase type, passing
> an erase size of zero to spi_nor_set_erase_type().
> Fix shift-out-of-bounds and just clear the erase params when
> passing zero for erase size.
> While here avoid a superfluous dereference and use 'size' directly.
> 
> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> shift exponent 4294967295 is too large for 32-bit type 'int'
> 
> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR
> flash memories") Reported-by: Alexander Stein
> <Alexander.Stein@tq-group.com>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 3d97c189c332..a1b5d5432f41 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type
> *erase, u32 size, erase->size = size;
>  	erase->opcode = opcode;
>  	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
> -	erase->size_shift = ffs(erase->size) - 1;
> -	erase->size_mask = (1 << erase->size_shift) - 1;
> +	if (size) {
> +		erase->size_shift = ffs(size) - 1;
> +		erase->size_mask = (1 << erase->size_shift) - 1;
> +	} else {
> +		erase->size_shift = 0;
> +		erase->size_mask = 0;
> +	}
>  }
> 
>  /**

What is the status of this patch? It is not applied up until now, no? Has it 
been superseeded?

Regards,
Alexander

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Alexander Stein]

Hello,

Am Samstag, 6. November 2021, 08:56:15 CET schrieb Tudor Ambarus:
> When paring SFDP we may choose to mask out an erase type, passing
> an erase size of zero to spi_nor_set_erase_type().
> Fix shift-out-of-bounds and just clear the erase params when
> passing zero for erase size.
> While here avoid a superfluous dereference and use 'size' directly.
> 
> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> shift exponent 4294967295 is too large for 32-bit type 'int'
> 
> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR
> flash memories") Reported-by: Alexander Stein
> <Alexander.Stein@tq-group.com>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 3d97c189c332..a1b5d5432f41 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type
> *erase, u32 size, erase->size = size;
>  	erase->opcode = opcode;
>  	/* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
> -	erase->size_shift = ffs(erase->size) - 1;
> -	erase->size_mask = (1 << erase->size_shift) - 1;
> +	if (size) {
> +		erase->size_shift = ffs(size) - 1;
> +		erase->size_mask = (1 << erase->size_shift) - 1;
> +	} else {
> +		erase->size_shift = 0;
> +		erase->size_mask = 0;
> +	}
>  }
> 
>  /**

What is the status of this patch? It is not applied up until now, no? Has it 
been superseeded?

Regards,
Alexander




______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Tudor.Ambarus]

On 3/16/22 09:39, Alexander Stein wrote:
> [You don't often get email from alexander.stein@tq-group.com. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
> 
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hello,

hi,

> 
> Am Samstag, 6. November 2021, 08:56:15 CET schrieb Tudor Ambarus:
>> When paring SFDP we may choose to mask out an erase type, passing
>> an erase size of zero to spi_nor_set_erase_type().
>> Fix shift-out-of-bounds and just clear the erase params when
>> passing zero for erase size.
>> While here avoid a superfluous dereference and use 'size' directly.
>>
>> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
>> shift exponent 4294967295 is too large for 32-bit type 'int'
>>
>> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR
>> flash memories") Reported-by: Alexander Stein
>> <Alexander.Stein@tq-group.com>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>> ---
>>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>>  1 file changed, 7 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
>> index 3d97c189c332..a1b5d5432f41 100644
>> --- a/drivers/mtd/spi-nor/core.c
>> +++ b/drivers/mtd/spi-nor/core.c
>> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type
>> *erase, u32 size, erase->size = size;
>>       erase->opcode = opcode;
>>       /* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
>> -     erase->size_shift = ffs(erase->size) - 1;
>> -     erase->size_mask = (1 << erase->size_shift) - 1;
>> +     if (size) {
>> +             erase->size_shift = ffs(size) - 1;
>> +             erase->size_mask = (1 << erase->size_shift) - 1;
>> +     } else {
>> +             erase->size_shift = 0;
>> +             erase->size_mask = 0;
>> +     }
>>  }
>>
>>  /**
> 
> What is the status of this patch? It is not applied up until now, no? Has it
> been superseeded?
> 

I think it's marked with "changes requested". I'm going to send a v2.

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Tudor.Ambarus]

On 3/16/22 09:39, Alexander Stein wrote:
> [You don't often get email from alexander.stein@tq-group.com. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
> 
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hello,

hi,

> 
> Am Samstag, 6. November 2021, 08:56:15 CET schrieb Tudor Ambarus:
>> When paring SFDP we may choose to mask out an erase type, passing
>> an erase size of zero to spi_nor_set_erase_type().
>> Fix shift-out-of-bounds and just clear the erase params when
>> passing zero for erase size.
>> While here avoid a superfluous dereference and use 'size' directly.
>>
>> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
>> shift exponent 4294967295 is too large for 32-bit type 'int'
>>
>> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR
>> flash memories") Reported-by: Alexander Stein
>> <Alexander.Stein@tq-group.com>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>> ---
>>  drivers/mtd/spi-nor/core.c | 9 +++++++--
>>  1 file changed, 7 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
>> index 3d97c189c332..a1b5d5432f41 100644
>> --- a/drivers/mtd/spi-nor/core.c
>> +++ b/drivers/mtd/spi-nor/core.c
>> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct spi_nor_erase_type
>> *erase, u32 size, erase->size = size;
>>       erase->opcode = opcode;
>>       /* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
>> -     erase->size_shift = ffs(erase->size) - 1;
>> -     erase->size_mask = (1 << erase->size_shift) - 1;
>> +     if (size) {
>> +             erase->size_shift = ffs(size) - 1;
>> +             erase->size_mask = (1 << erase->size_shift) - 1;
>> +     } else {
>> +             erase->size_shift = 0;
>> +             erase->size_mask = 0;
>> +     }
>>  }
>>
>>  /**
> 
> What is the status of this patch? It is not applied up until now, no? Has it
> been superseeded?
> 

I think it's marked with "changes requested". I'm going to send a v2.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Stein, Alexander]

Hi Tudor,

Am Mittwoch, 16. März 2022, 08:47:40 CET schrieb Tudor.Ambarus@microchip.com:
> On 3/16/22 09:39, Alexander Stein wrote:
> 
> > [You don't often get email from alexander.stein@tq-group.com. Learn why
> > this is important at http://aka.ms/LearnAboutSenderIdentification.]
 
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> > content is safe
 
> > Hello,
> 
> 
> hi,
> 
> 
> > 
> > Am Samstag, 6. November 2021, 08:56:15 CET schrieb Tudor Ambarus:
> > 
> >> When paring SFDP we may choose to mask out an erase type, passing
> >> an erase size of zero to spi_nor_set_erase_type().
> >> Fix shift-out-of-bounds and just clear the erase params when
> >> passing zero for erase size.
> >> While here avoid a superfluous dereference and use 'size' directly.
> >>
> >>
> >>
> >> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> >> shift exponent 4294967295 is too large for 32-bit type 'int'
> >>
> >>
> >>
> >> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI
> >> NOR
 flash memories") Reported-by: Alexander Stein
> >> <Alexander.Stein@tq-group.com>
> >> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> >> ---
> >> 
> >>  drivers/mtd/spi-nor/core.c | 9 +++++++--
> >>  1 file changed, 7 insertions(+), 2 deletions(-)
> >>
> >>
> >>
> >> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> >> index 3d97c189c332..a1b5d5432f41 100644
> >> --- a/drivers/mtd/spi-nor/core.c
> >> +++ b/drivers/mtd/spi-nor/core.c
> >> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct
> >> spi_nor_erase_type
 *erase, u32 size, erase->size = size;
> >> 
> >>       erase->opcode = opcode;
> >>       /* JEDEC JESD216B Standard imposes erase sizes to be power of 2.
> >>       */
> >> 
> >> -     erase->size_shift = ffs(erase->size) - 1;
> >> -     erase->size_mask = (1 << erase->size_shift) - 1;
> >> +     if (size) {
> >> +             erase->size_shift = ffs(size) - 1;
> >> +             erase->size_mask = (1 << erase->size_shift) - 1;
> >> +     } else {
> >> +             erase->size_shift = 0;
> >> +             erase->size_mask = 0;
> >> +     }
> >> 
> >>  }
> >>
> >>
> >>
> >>  /**
> > 
> > 
> > What is the status of this patch? It is not applied up until now, no? Has
> > it
 been superseeded?
> > 
> 
> 
> I think it's marked with "changes requested". I'm going to send a v2.

Is there a v2 somewhere?

Best regards,
Alexander

Re: [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds

[Stein, Alexander]

Hi Tudor,

Am Mittwoch, 16. März 2022, 08:47:40 CET schrieb Tudor.Ambarus@microchip.com:
> On 3/16/22 09:39, Alexander Stein wrote:
> 
> > [You don't often get email from alexander.stein@tq-group.com. Learn why
> > this is important at http://aka.ms/LearnAboutSenderIdentification.]
 
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> > content is safe
 
> > Hello,
> 
> 
> hi,
> 
> 
> > 
> > Am Samstag, 6. November 2021, 08:56:15 CET schrieb Tudor Ambarus:
> > 
> >> When paring SFDP we may choose to mask out an erase type, passing
> >> an erase size of zero to spi_nor_set_erase_type().
> >> Fix shift-out-of-bounds and just clear the erase params when
> >> passing zero for erase size.
> >> While here avoid a superfluous dereference and use 'size' directly.
> >>
> >>
> >>
> >> UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
> >> shift exponent 4294967295 is too large for 32-bit type 'int'
> >>
> >>
> >>
> >> Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI
> >> NOR
 flash memories") Reported-by: Alexander Stein
> >> <Alexander.Stein@tq-group.com>
> >> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> >> ---
> >> 
> >>  drivers/mtd/spi-nor/core.c | 9 +++++++--
> >>  1 file changed, 7 insertions(+), 2 deletions(-)
> >>
> >>
> >>
> >> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> >> index 3d97c189c332..a1b5d5432f41 100644
> >> --- a/drivers/mtd/spi-nor/core.c
> >> +++ b/drivers/mtd/spi-nor/core.c
> >> @@ -2230,8 +2230,13 @@ void spi_nor_set_erase_type(struct
> >> spi_nor_erase_type
 *erase, u32 size, erase->size = size;
> >> 
> >>       erase->opcode = opcode;
> >>       /* JEDEC JESD216B Standard imposes erase sizes to be power of 2.
> >>       */
> >> 
> >> -     erase->size_shift = ffs(erase->size) - 1;
> >> -     erase->size_mask = (1 << erase->size_shift) - 1;
> >> +     if (size) {
> >> +             erase->size_shift = ffs(size) - 1;
> >> +             erase->size_mask = (1 << erase->size_shift) - 1;
> >> +     } else {
> >> +             erase->size_shift = 0;
> >> +             erase->size_mask = 0;
> >> +     }
> >> 
> >>  }
> >>
> >>
> >>
> >>  /**
> > 
> > 
> > What is the status of this patch? It is not applied up until now, no? Has
> > it
 been superseeded?
> > 
> 
> 
> I think it's marked with "changes requested". I'm going to send a v2.

Is there a v2 somewhere?

Best regards,
Alexander

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 2/2] mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

[Tudor Ambarus]

SPI_NOR_NO_ERASE is used either by F-RAMs, or MRAMs, or EEPROMs,
neither of which supports SFDP, so once SPI_NOR_NO_ERASE is set,
SFDP can not undo it. These type of flashes should be moved out of
the SPI NOR core anyway, so don't complicate things and just skip
the erase logic when SPI_NOR_NO_ERASE is set. Normally SPI NOR core
should operate just on SNOR_F flags, but since SPI_NOR_NO_ERASE
should be removed, don't bother with extra code.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index a1b5d5432f41..52c82d943499 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2680,6 +2680,9 @@ static void spi_nor_skip_sfdp_init_params(struct spi_nor *nor)
 					SPINOR_OP_PP, SNOR_PROTO_8_8_8_DTR);
 	}
 
+	if (info_flags & SPI_NOR_NO_ERASE)
+		return;
+
 	/*
 	 * Sector Erase settings. Sort Erase Types in ascending order, with the
 	 * smallest erase size starting at BIT(0).
@@ -3195,12 +3198,13 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
 		mtd->name = dev_name(dev);
 	mtd->type = MTD_NORFLASH;
 	mtd->flags = MTD_CAP_NORFLASH;
-	if (nor->info->flags & SPI_NOR_NO_ERASE)
+	if (nor->info->flags & SPI_NOR_NO_ERASE) {
+		mtd->_erase = spi_nor_erase;
 		mtd->flags |= MTD_NO_ERASE;
+	}
 	mtd->writesize = nor->params->writesize;
 	mtd->writebufsize = nor->params->page_size;
 	mtd->size = nor->params->size;
-	mtd->_erase = spi_nor_erase;
 	mtd->_read = spi_nor_read;
 	/* Might be already set by some SST flashes. */
 	if (!mtd->_write)
-- 
2.25.1

[PATCH 2/2] mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

[Tudor Ambarus]

SPI_NOR_NO_ERASE is used either by F-RAMs, or MRAMs, or EEPROMs,
neither of which supports SFDP, so once SPI_NOR_NO_ERASE is set,
SFDP can not undo it. These type of flashes should be moved out of
the SPI NOR core anyway, so don't complicate things and just skip
the erase logic when SPI_NOR_NO_ERASE is set. Normally SPI NOR core
should operate just on SNOR_F flags, but since SPI_NOR_NO_ERASE
should be removed, don't bother with extra code.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index a1b5d5432f41..52c82d943499 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2680,6 +2680,9 @@ static void spi_nor_skip_sfdp_init_params(struct spi_nor *nor)
 					SPINOR_OP_PP, SNOR_PROTO_8_8_8_DTR);
 	}
 
+	if (info_flags & SPI_NOR_NO_ERASE)
+		return;
+
 	/*
 	 * Sector Erase settings. Sort Erase Types in ascending order, with the
 	 * smallest erase size starting at BIT(0).
@@ -3195,12 +3198,13 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
 		mtd->name = dev_name(dev);
 	mtd->type = MTD_NORFLASH;
 	mtd->flags = MTD_CAP_NORFLASH;
-	if (nor->info->flags & SPI_NOR_NO_ERASE)
+	if (nor->info->flags & SPI_NOR_NO_ERASE) {
+		mtd->_erase = spi_nor_erase;
 		mtd->flags |= MTD_NO_ERASE;
+	}
 	mtd->writesize = nor->params->writesize;
 	mtd->writebufsize = nor->params->page_size;
 	mtd->size = nor->params->size;
-	mtd->_erase = spi_nor_erase;
 	mtd->_read = spi_nor_read;
 	/* Might be already set by some SST flashes. */
 	if (!mtd->_write)
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 2/2] mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

[Pratyush Yadav]

On 06/11/21 09:56AM, Tudor Ambarus wrote:
> SPI_NOR_NO_ERASE is used either by F-RAMs, or MRAMs, or EEPROMs,
> neither of which supports SFDP, so once SPI_NOR_NO_ERASE is set,
> SFDP can not undo it. These type of flashes should be moved out of
> the SPI NOR core anyway, so don't complicate things and just skip
> the erase logic when SPI_NOR_NO_ERASE is set. Normally SPI NOR core
> should operate just on SNOR_F flags, but since SPI_NOR_NO_ERASE
> should be removed, don't bother with extra code.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index a1b5d5432f41..52c82d943499 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2680,6 +2680,9 @@ static void spi_nor_skip_sfdp_init_params(struct spi_nor *nor)
>  					SPINOR_OP_PP, SNOR_PROTO_8_8_8_DTR);
>  	}
>  
> +	if (info_flags & SPI_NOR_NO_ERASE)
> +		return;
> +
>  	/*
>  	 * Sector Erase settings. Sort Erase Types in ascending order, with the
>  	 * smallest erase size starting at BIT(0).
> @@ -3195,12 +3198,13 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
>  		mtd->name = dev_name(dev);
>  	mtd->type = MTD_NORFLASH;
>  	mtd->flags = MTD_CAP_NORFLASH;
> -	if (nor->info->flags & SPI_NOR_NO_ERASE)
> +	if (nor->info->flags & SPI_NOR_NO_ERASE) {
> +		mtd->_erase = spi_nor_erase;

You only set mtd->_erase when SPI_NOR_NO_ERASE is set? That does not 
make any sense to me. It should be the opposite.

>  		mtd->flags |= MTD_NO_ERASE;
> +	}
>  	mtd->writesize = nor->params->writesize;
>  	mtd->writebufsize = nor->params->page_size;
>  	mtd->size = nor->params->size;
> -	mtd->_erase = spi_nor_erase;
>  	mtd->_read = spi_nor_read;
>  	/* Might be already set by some SST flashes. */
>  	if (!mtd->_write)
> -- 
> 2.25.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.

Re: [PATCH 2/2] mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set

[Pratyush Yadav]

On 06/11/21 09:56AM, Tudor Ambarus wrote:
> SPI_NOR_NO_ERASE is used either by F-RAMs, or MRAMs, or EEPROMs,
> neither of which supports SFDP, so once SPI_NOR_NO_ERASE is set,
> SFDP can not undo it. These type of flashes should be moved out of
> the SPI NOR core anyway, so don't complicate things and just skip
> the erase logic when SPI_NOR_NO_ERASE is set. Normally SPI NOR core
> should operate just on SNOR_F flags, but since SPI_NOR_NO_ERASE
> should be removed, don't bother with extra code.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index a1b5d5432f41..52c82d943499 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2680,6 +2680,9 @@ static void spi_nor_skip_sfdp_init_params(struct spi_nor *nor)
>  					SPINOR_OP_PP, SNOR_PROTO_8_8_8_DTR);
>  	}
>  
> +	if (info_flags & SPI_NOR_NO_ERASE)
> +		return;
> +
>  	/*
>  	 * Sector Erase settings. Sort Erase Types in ascending order, with the
>  	 * smallest erase size starting at BIT(0).
> @@ -3195,12 +3198,13 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
>  		mtd->name = dev_name(dev);
>  	mtd->type = MTD_NORFLASH;
>  	mtd->flags = MTD_CAP_NORFLASH;
> -	if (nor->info->flags & SPI_NOR_NO_ERASE)
> +	if (nor->info->flags & SPI_NOR_NO_ERASE) {
> +		mtd->_erase = spi_nor_erase;

You only set mtd->_erase when SPI_NOR_NO_ERASE is set? That does not 
make any sense to me. It should be the opposite.

>  		mtd->flags |= MTD_NO_ERASE;
> +	}
>  	mtd->writesize = nor->params->writesize;
>  	mtd->writebufsize = nor->params->page_size;
>  	mtd->size = nor->params->size;
> -	mtd->_erase = spi_nor_erase;
>  	mtd->_read = spi_nor_read;
>  	/* Might be already set by some SST flashes. */
>  	if (!mtd->_write)
> -- 
> 2.25.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/