* [PATCH v2] rtc: rs5c372: Add RTC_VL_READ, RTC_VL_CLR ioctls
@ 2021-11-10 14:14 Camel Guo
2021-11-11 8:39 ` Camel Guo
0 siblings, 1 reply; 2+ messages in thread
From: Camel Guo @ 2021-11-10 14:14 UTC (permalink / raw)
To: Alessandro Zummo, Alexandre Belloni
Cc: kernel, Camel Guo, linux-rtc, linux-kernel
From: Camel Guo <camelg@axis.com>
In order to make it possible to get battery voltage status, this commit
adds RTC_VL_READ, RTC_VL_CLR ioctl commands to rtc-rs5c372.
Signed-off-by: Camel Guo <camelg@axis.com>
---
v2: Set RTC_VL_BACKUP_LOW if VDET is set. Do not clear PON, XSTP in
RTC_VL_CLR ioctl
drivers/rtc/rtc-rs5c372.c | 60 +++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 80980414890c..4ab8718d9360 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -485,6 +485,65 @@ static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
#define rs5c372_rtc_proc NULL
#endif
+#ifdef CONFIG_RTC_INTF_DEV
+static int rs5c372_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct rs5c372 *rs5c = i2c_get_clientdata(to_i2c_client(dev));
+ unsigned char ctrl2;
+ int addr;
+ unsigned int flags;
+
+ dev_dbg(dev, "%s: cmd=%x\n", __func__, cmd);
+
+ addr = RS5C_ADDR(RS5C_REG_CTRL2);
+ ctrl2 = i2c_smbus_read_byte_data(rs5c->client, addr);
+
+ switch (cmd) {
+ case RTC_VL_READ:
+ flags = 0;
+
+ switch (rs5c->type) {
+ case rtc_r2025sd:
+ case rtc_r2221tl:
+ if ((rs5c->type == rtc_r2025sd && !(ctrl2 & R2x2x_CTRL2_XSTP)) ||
+ (rs5c->type == rtc_r2221tl && (ctrl2 & R2x2x_CTRL2_XSTP))) {
+ flags |= RTC_VL_DATA_INVALID;
+ }
+ if (ctrl2 & R2x2x_CTRL2_VDET)
+ flags |= RTC_VL_BACKUP_LOW;
+ break;
+ default:
+ if (ctrl2 & RS5C_CTRL2_XSTP)
+ flags |= RTC_VL_DATA_INVALID;
+ break;
+ }
+
+ return put_user(flags, (unsigned int __user *)arg);
+ case RTC_VL_CLR:
+ /* clear VDET bit */
+ switch (rs5c->type) {
+ case rtc_r2025sd:
+ case rtc_r2221tl:
+ ctrl2 &= ~R2x2x_CTRL2_VDET;
+ default:
+ break;
+ }
+
+ if (i2c_smbus_write_byte_data(rs5c->client, addr, ctrl2) < 0) {
+ dev_dbg(&rs5c->client->dev, "%s: write error in line %i\n",
+ __func__, __LINE__);
+ return -EIO;
+ }
+ return 0;
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+#else
+#define rs5c372_ioctl NULL
+#endif
+
static const struct rtc_class_ops rs5c372_rtc_ops = {
.proc = rs5c372_rtc_proc,
.read_time = rs5c372_rtc_read_time,
@@ -492,6 +551,7 @@ static const struct rtc_class_ops rs5c372_rtc_ops = {
.read_alarm = rs5c_read_alarm,
.set_alarm = rs5c_set_alarm,
.alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
+ .ioctl = rs5c372_ioctl,
};
#if IS_ENABLED(CONFIG_RTC_INTF_SYSFS)
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] rtc: rs5c372: Add RTC_VL_READ, RTC_VL_CLR ioctls
2021-11-10 14:14 [PATCH v2] rtc: rs5c372: Add RTC_VL_READ, RTC_VL_CLR ioctls Camel Guo
@ 2021-11-11 8:39 ` Camel Guo
0 siblings, 0 replies; 2+ messages in thread
From: Camel Guo @ 2021-11-11 8:39 UTC (permalink / raw)
To: Camel Guo, Alessandro Zummo, Alexandre Belloni
Cc: kernel, linux-rtc, linux-kernel
On 11/10/21 3:14 PM, Camel Guo wrote:
> From: Camel Guo <camelg@axis.com>
>
> In order to make it possible to get battery voltage status, this commit
> adds RTC_VL_READ, RTC_VL_CLR ioctl commands to rtc-rs5c372.
>
> Signed-off-by: Camel Guo <camelg@axis.com>
> ---
>
> v2: Set RTC_VL_BACKUP_LOW if VDET is set. Do not clear PON, XSTP in
> RTC_VL_CLR ioctl
>
> drivers/rtc/rtc-rs5c372.c | 60 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
> index 80980414890c..4ab8718d9360 100644
> --- a/drivers/rtc/rtc-rs5c372.c
> +++ b/drivers/rtc/rtc-rs5c372.c
> @@ -485,6 +485,65 @@ static int rs5c372_rtc_proc(struct device *dev,
> struct seq_file *seq)
> #define rs5c372_rtc_proc NULL
> #endif
>
> +#ifdef CONFIG_RTC_INTF_DEV
> +static int rs5c372_ioctl(struct device *dev, unsigned int cmd, unsigned
> long arg)
> +{
> + struct rs5c372 *rs5c = i2c_get_clientdata(to_i2c_client(dev));
> + unsigned char ctrl2;
> + int addr;
> + unsigned int flags;
> +
> + dev_dbg(dev, "%s: cmd=%x\n", __func__, cmd);
> +
> + addr = RS5C_ADDR(RS5C_REG_CTRL2);
> + ctrl2 = i2c_smbus_read_byte_data(rs5c->client, addr);
> +
> + switch (cmd) {
> + case RTC_VL_READ:
> + flags = 0;
> +
> + switch (rs5c->type) {
> + case rtc_r2025sd:
> + case rtc_r2221tl:
> + if ((rs5c->type == rtc_r2025sd && !(ctrl2 &
> R2x2x_CTRL2_XSTP)) ||
> + (rs5c->type == rtc_r2221tl && (ctrl2 &
> R2x2x_CTRL2_XSTP))) {
> + flags |= RTC_VL_DATA_INVALID;
> + }
> + if (ctrl2 & R2x2x_CTRL2_VDET)
> + flags |= RTC_VL_BACKUP_LOW;
> + break;
> + default:
> + if (ctrl2 & RS5C_CTRL2_XSTP)
> + flags |= RTC_VL_DATA_INVALID;
> + break;
> + }
> +
> + return put_user(flags, (unsigned int __user *)arg);
> + case RTC_VL_CLR:
> + /* clear VDET bit */
> + switch (rs5c->type) {
> + case rtc_r2025sd:
> + case rtc_r2221tl:
> + ctrl2 &= ~R2x2x_CTRL2_VDET;
> + default:
> + break;
> + }
> +
> + if (i2c_smbus_write_byte_data(rs5c->client, addr, ctrl2)
> < 0) {
> + dev_dbg(&rs5c->client->dev, "%s: write error in
> line %i\n",
> + __func__, __LINE__);
> + return -EIO;
> + }
> + return 0;
> + default:
> + return -ENOIOCTLCMD;
> + }
> + return 0;
> +}
> +#else
> +#define rs5c372_ioctl NULL
> +#endif
> +
> static const struct rtc_class_ops rs5c372_rtc_ops = {
> .proc = rs5c372_rtc_proc,
> .read_time = rs5c372_rtc_read_time,
> @@ -492,6 +551,7 @@ static const struct rtc_class_ops rs5c372_rtc_ops = {
> .read_alarm = rs5c_read_alarm,
> .set_alarm = rs5c_set_alarm,
> .alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
> + .ioctl = rs5c372_ioctl,
> };
>
> #if IS_ENABLED(CONFIG_RTC_INTF_SYSFS)
> --
> 2.20.1
>
PATCH v3 is uploaded with the fix of avoiding setting ctrl2 register
when unnecessary. Please review v3 instead.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-11-11 8:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-10 14:14 [PATCH v2] rtc: rs5c372: Add RTC_VL_READ, RTC_VL_CLR ioctls Camel Guo
2021-11-11 8:39 ` Camel Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.