[PATCH 1/3] ARM: dts: stm32: Enable LVDS panel on i.Core STM32MP1 EDIMM2.2

[PATCH 1/3] ARM: dts: stm32: Enable LVDS panel on i.Core STM32MP1 EDIMM2.2

[Jagan Teki]

Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit has plugged with
7" LVDS panel.

Engicam i.Core STM32MP1 SoM has SN65DSI84 DSI to LVDS bridge.

This patch adds a display pipeline to connect DSI to SN65DSI84
to 7" LVDS panel.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../stm32mp157a-icore-stm32mp1-edimm2.2.dts   | 85 +++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index ec9f1d1cd50f..d80b4415e761 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -24,6 +24,91 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	panel {
+		compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in_ltdc: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out_bridge: endpoint {
+				remote-endpoint = <&bridge_in_dsi>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in_dsi: endpoint {
+					remote-endpoint = <&dsi_out_bridge>;
+					data-lanes = <0 1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out_panel: endpoint {
+					remote-endpoint = <&panel_out_bridge>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in_ltdc>;
+		};
+	};
 };
 
 &sdmmc1 {
-- 
2.25.1

[PATCH 1/3] ARM: dts: stm32: Enable LVDS panel on i.Core STM32MP1 EDIMM2.2

[Jagan Teki]

Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit has plugged with
7" LVDS panel.

Engicam i.Core STM32MP1 SoM has SN65DSI84 DSI to LVDS bridge.

This patch adds a display pipeline to connect DSI to SN65DSI84
to 7" LVDS panel.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../stm32mp157a-icore-stm32mp1-edimm2.2.dts   | 85 +++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index ec9f1d1cd50f..d80b4415e761 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -24,6 +24,91 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	panel {
+		compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in_ltdc: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out_bridge: endpoint {
+				remote-endpoint = <&bridge_in_dsi>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in_dsi: endpoint {
+					remote-endpoint = <&dsi_out_bridge>;
+					data-lanes = <0 1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out_panel: endpoint {
+					remote-endpoint = <&panel_out_bridge>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in_ltdc>;
+		};
+	};
 };
 
 &sdmmc1 {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

[Jagan Teki]

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.

Add bindings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index bcaf7be3ab37..d2dd3f1847bb 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -77,6 +77,7 @@ properties:
         items:
           - enum:
               - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-ctouch2-of10  # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" Open Frame
               - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
           - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
           - const: st,stm32mp157
-- 
2.25.1

[PATCH 2/3] dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

[Jagan Teki]

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.

Add bindings for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index bcaf7be3ab37..d2dd3f1847bb 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -77,6 +77,7 @@ properties:
         items:
           - enum:
               - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-ctouch2-of10  # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" Open Frame
               - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
           - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
           - const: st,stm32mp157
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/3] ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

[Jagan Teki]

ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- 10" LVDS Panel (SN65DSI84 DSI-LVDS bridge on SoM)

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 ...tm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 132 ++++++++++++++++++
 2 files changed, 133 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0de64f237cd8..641220e970e8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1140,6 +1140,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
 	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
 	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \
 	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
 	stm32mp157a-stinger96.dtb \
 	stm32mp157c-dhcom-pdk2.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
new file mode 100644
index 000000000000..351be43b3d39
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1\" Open Frame";
+	compatible = "engicam,icore-stm32mp1-ctouch2-of10",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
-- 
2.25.1

[PATCH 3/3] ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

[Jagan Teki]

ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- 10" LVDS Panel (SN65DSI84 DSI-LVDS bridge on SoM)

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 ...tm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 132 ++++++++++++++++++
 2 files changed, 133 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0de64f237cd8..641220e970e8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1140,6 +1140,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
 	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
 	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \
 	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
 	stm32mp157a-stinger96.dtb \
 	stm32mp157c-dhcom-pdk2.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
new file mode 100644
index 000000000000..351be43b3d39
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1\" Open Frame";
+	compatible = "engicam,icore-stm32mp1-ctouch2-of10",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

[Rob Herring]

On Thu, 11 Nov 2021 21:15:56 +0530, Jagan Teki wrote:
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
> 
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
> 
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
> 
> i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
> pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
> 10.1" Open Frame board.
> 
> Add bindings for it.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/arm/stm32/stm32.yaml:76:111: [warning] line too long (116 > 110 characters) (line-length)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1553999

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH 2/3] dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

[Rob Herring]

On Thu, 11 Nov 2021 21:15:56 +0530, Jagan Teki wrote:
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
> 
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
> 
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
> 
> i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
> pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
> 10.1" Open Frame board.
> 
> Add bindings for it.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/arm/stm32/stm32.yaml:76:111: [warning] line too long (116 > 110 characters) (line-length)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1553999

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel