[u-boot-test-hooks PATCH 1/7] travis-ci: Add qemu_arm_spl board

[u-boot-test-hooks PATCH 1/7] travis-ci: Add qemu_arm_spl board

[Simon Glass]

From: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>

This is similar to the existing qemu_arm target, except that the 'bios' is
image.bin (containing both SPL and U-Boot) rather than in u-boot.bin

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 bin/travis-ci/conf.qemu_arm_spl_na | 31 ++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 bin/travis-ci/conf.qemu_arm_spl_na

diff --git a/bin/travis-ci/conf.qemu_arm_spl_na b/bin/travis-ci/conf.qemu_arm_spl_na
new file mode 100644
index 0000000..18c7fe5
--- /dev/null
+++ b/bin/travis-ci/conf.qemu_arm_spl_na
@@ -0,0 +1,31 @@
+# Copyright 2021 Google LLC
+# Based on conf.vexpress_ca15_tc2_qemu which is:
+# Copyright (c) 2016 Konsulko Group. All rights reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+
+console_impl=qemu
+qemu_machine="virt"
+qemu_binary="qemu-system-arm"
+qemu_extra_args="-nographic -netdev user,id=net0,tftp=${UBOOT_TRAVIS_BUILD_DIR} -device e1000,netdev=net0 -device virtio-rng-pci"
+
+# Uses image.bin which contains SPL and U-Boot
+qemu_kernel_args="-bios ${U_BOOT_BUILD_DIR}/image.bin"
+reset_impl=none
+flash_impl=none
-- 
2.33.1.1089.g2158813163f-goog

[u-boot-test-hooks PATCH 2/7] sdwire: Tidy up the mount script

[Simon Glass]

Add a comment about the tools and drop the debugging, since this seems
reliable now.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 bin/flash.sdwire_relay_mount | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/bin/flash.sdwire_relay_mount b/bin/flash.sdwire_relay_mount
index 4713c2f..f75d33f 100644
--- a/bin/flash.sdwire_relay_mount
+++ b/bin/flash.sdwire_relay_mount
@@ -21,12 +21,14 @@
 # Designed for using SDwire uSD mux and selected power control:
 # https://wiki.tizen.org/SDWire
 
+# It requires these tools:
+# sd-mux-ctrl at https://git.tizen.org/cgit/tools/testlab/sd-mux/
+# usbrelay
+
 . poweroff.${power_impl}
 
 sleep 0.1
-echo common
 
 . flash.sdwire_common_mount
 
 . poweron.${power_impl}
-echo flash done
-- 
2.33.1.1089.g2158813163f-goog

Re: [u-boot-test-hooks PATCH 2/7] sdwire: Tidy up the mount script

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 268 bytes --]

On Sat, Oct 30, 2021 at 12:25:34PM -0600, Simon Glass wrote:

> Add a comment about the tools and drop the debugging, since this seems
> reliable now.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot-test-hooks/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

[u-boot-test-hooks PATCH 3/7] rpi3: Tweak the grep pattern

[Simon Glass]

Just to be safe, check for the pattern only at the start of a line, since
it is possible to add a comment with this in it.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 bin/writer.rpi3_mount | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/bin/writer.rpi3_mount b/bin/writer.rpi3_mount
index 7b078a1..97f24a5 100755
--- a/bin/writer.rpi3_mount
+++ b/bin/writer.rpi3_mount
@@ -41,7 +41,7 @@ fi
 
 # Enable the UART and fix the GPU frequency so it works correctly
 sed -i '/enable_uart/c\enable_uart = 1' /media/rpi3_b_boot/config.txt
-if ! grep -q gpu_freq=250 /media/rpi3_b_boot/config.txt; then
+if ! grep -q "^gpu_freq=250" /media/rpi3_b_boot/config.txt; then
     echo 'gpu_freq=250' >>/media/rpi3_b_boot/config.txt
 fi
 
-- 
2.33.1.1089.g2158813163f-goog

Re: [u-boot-test-hooks PATCH 3/7] rpi3: Tweak the grep pattern

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 306 bytes --]

On Sat, Oct 30, 2021 at 12:25:35PM -0600, Simon Glass wrote:

> Just to be safe, check for the pattern only at the start of a line, since
> it is possible to add a comment with this in it.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot-test-hooks/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

[u-boot-test-hooks PATCH 4/7] Add wait_raw_device for common code

[Simon Glass]

This code is duplicated in two scripts. Put it into a new wait_raw_device
to avoid this. Also rename the 'done' variable to 'complete' to void
confusing it with the end of the for loop.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 bin/flash.sdwire_digital-loggers_raw | 15 +-----------
 bin/flash.sdwire_poweroff_raw        | 15 +-----------
 bin/wait_raw_device                  | 34 ++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 28 deletions(-)
 create mode 100644 bin/wait_raw_device

diff --git a/bin/flash.sdwire_digital-loggers_raw b/bin/flash.sdwire_digital-loggers_raw
index 7d5fbc9..f9956f7 100644
--- a/bin/flash.sdwire_digital-loggers_raw
+++ b/bin/flash.sdwire_digital-loggers_raw
@@ -33,20 +33,7 @@ curl --data ${power_port}=OFF -o /dev/null --silent \
 # Switch over to get USB card access
 sd-mux-ctrl --device-serial ${sdwire_serial} --ts
 
-# Wait for the device to become available
-done=false
-for i in {0..9}; do
-    if dd if=${raw_device} of=/dev/null count=1 >/dev/null 2>&1; then
-        done=true
-        break
-    fi
-
-    sleep 1
-done
-if [[ $done = false ]]; then
-    echo "Failed to access ${raw_device} after 10 tries"
-    exit 1
-fi
+. wait_raw_device
 
 writer.${flash_writer} ${raw_device} ${U_BOOT_BUILD_DIR}
 
diff --git a/bin/flash.sdwire_poweroff_raw b/bin/flash.sdwire_poweroff_raw
index 28fa096..d82a3ef 100644
--- a/bin/flash.sdwire_poweroff_raw
+++ b/bin/flash.sdwire_poweroff_raw
@@ -34,20 +34,7 @@ mount_dir=/media/${mount_point}
 # Switch over to get USB card access
 sd-mux-ctrl --device-serial ${sdwire_serial} --ts
 
-# Wait for the device to become available
-done=false
-for i in {0..9}; do
-    if dd if=${raw_device} of=/dev/null count=1 >/dev/null 2>&1; then
-        done=true
-        break
-    fi
-
-    sleep 1
-done
-if [[ $done = false ]]; then
-    echo "Failed to access ${raw_device} after 10 tries"
-    exit 1
-fi
+. wait_raw_device
 
 writer.${flash_writer} ${raw_device} ${U_BOOT_BUILD_DIR}
 
diff --git a/bin/wait_raw_device b/bin/wait_raw_device
new file mode 100644
index 0000000..c292114
--- /dev/null
+++ b/bin/wait_raw_device
@@ -0,0 +1,34 @@
+# Copyright 2021 Google LLC
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+
+# Wait for the device ${raw_device} to become available
+complete=false
+for i in {0..9}; do
+    if dd if=${raw_device} of=/dev/null count=1 >/dev/null 2>&1; then
+        complete=true
+        break
+    fi
+
+    sleep 1
+done
+if [[ $complete = false ]]; then
+    echo "Failed to access ${raw_device} after 10 tries"
+    exit 1
+fi
-- 
2.33.1.1089.g2158813163f-goog

Re: [u-boot-test-hooks PATCH 4/7] Add wait_raw_device for common code

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 372 bytes --]

On Sat, Oct 30, 2021 at 12:25:36PM -0600, Simon Glass wrote:

> This code is duplicated in two scripts. Put it into a new wait_raw_device
> to avoid this. Also rename the 'done' variable to 'complete' to void
> confusing it with the end of the for loop.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot-test-hooks/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

[u-boot-test-hooks PATCH 5/7] Update sdwire script to wait for umount

[Simon Glass]

Sometimes the umount takes a while. Add the same wait loop as is used for
mount. Also rename the 'done' variable to 'complete' to void confusing it
with the end of the for loop.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 bin/flash.sdwire_common_mount | 28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

diff --git a/bin/flash.sdwire_common_mount b/bin/flash.sdwire_common_mount
index d696abb..6c763e6 100644
--- a/bin/flash.sdwire_common_mount
+++ b/bin/flash.sdwire_common_mount
@@ -25,10 +25,10 @@ mount_dir=/media/${mount_point}
 # Switch over to get USB card access
 sd-mux-ctrl --device-serial ${sdwire_serial} --ts
 
-done=false
+complete=false
 for i in {0..9}; do
     if out="$(mount UUID=${mount_uuid} 2>&1)"; then
-        done=true
+        complete=true
         break
     fi
     echo $out
@@ -41,7 +41,7 @@ for i in {0..9}; do
     fi
     sleep 1
 done
-if [[ $done = false ]]; then
+if [[ $complete = false ]]; then
     echo "Failed to mount UUID ${mount_uuid} after 10 tries"
     exit 1
 fi
@@ -53,7 +53,27 @@ if ! mountpoint -q ${mount_dir}; then
 fi
 
 writer.${flash_writer} ${mount_dir} ${U_BOOT_BUILD_DIR}
-umount ${mount_dir}
+
+complete=false
+for i in {0..9}; do
+    if out="$(umount ${mount_dir} 2>&1)"; then
+        complete=true
+        break
+    fi
+    echo $out
+    sleep 1
+done
+
+if [[ $complete = false ]]; then
+    echo "Failed to umount UUID ${mount_uuid} after 10 tries"
+    exit 1
+fi
+
+# Sanity check
+if mountpoint -q ${mount_dir}; then
+    echo "Mount ${mount_dir} still available after 'umount'"
+    exit 1
+fi
 
 # Back to card access for the DUT
 sd-mux-ctrl --device-serial ${sdwire_serial} --dut
-- 
2.33.1.1089.g2158813163f-goog

Re: [u-boot-test-hooks PATCH 5/7] Update sdwire script to wait for umount

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 364 bytes --]

On Sat, Oct 30, 2021 at 12:25:37PM -0600, Simon Glass wrote:

> Sometimes the umount takes a while. Add the same wait loop as is used for
> mount. Also rename the 'done' variable to 'complete' to void confusing it
> with the end of the for loop.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot-test-hooks/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

[u-boot-test-hooks PATCH 6/7] kea: Add samus

[Simon Glass]

Add a config for samus, the Chromebook Pixel 2.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 bin/kea/conf.chromebook_samus_sjg-samus | 30 +++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 bin/kea/conf.chromebook_samus_sjg-samus

diff --git a/bin/kea/conf.chromebook_samus_sjg-samus b/bin/kea/conf.chromebook_samus_sjg-samus
new file mode 100644
index 0000000..0e7db49
--- /dev/null
+++ b/bin/kea/conf.chromebook_samus_sjg-samus
@@ -0,0 +1,30 @@
+# Copyright 2021 Google LLC
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+
+reset_impl=servo
+flash_impl=em100
+power_impl=servo
+
+em100_chip=W25Q64FV
+em100_serial=DP033694
+
+servo_name=samus
+
+. ubtest_common
-- 
2.33.1.1089.g2158813163f-goog

Re: [u-boot-test-hooks PATCH 6/7] kea: Add samus

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 217 bytes --]

On Sat, Oct 30, 2021 at 12:25:38PM -0600, Simon Glass wrote:

> Add a config for samus, the Chromebook Pixel 2.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Applied to u-boot/master, thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

[u-boot-test-hooks PATCH 7/7] ellesmere: Add qemu rules

[Simon Glass]

Add some symlinks so that qemu can be used on ellesmere.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 bin/ellesmere/conf.qemu_arm_na     | 1 +
 bin/ellesmere/conf.qemu_arm_spl_na | 1 +
 2 files changed, 2 insertions(+)
 create mode 120000 bin/ellesmere/conf.qemu_arm_na
 create mode 120000 bin/ellesmere/conf.qemu_arm_spl_na

diff --git a/bin/ellesmere/conf.qemu_arm_na b/bin/ellesmere/conf.qemu_arm_na
new file mode 120000
index 0000000..aa91a9f
--- /dev/null
+++ b/bin/ellesmere/conf.qemu_arm_na
@@ -0,0 +1 @@
+../travis-ci/conf.qemu_arm_na
\ No newline at end of file
diff --git a/bin/ellesmere/conf.qemu_arm_spl_na b/bin/ellesmere/conf.qemu_arm_spl_na
new file mode 120000
index 0000000..e171c5a
--- /dev/null
+++ b/bin/ellesmere/conf.qemu_arm_spl_na
@@ -0,0 +1 @@
+../travis-ci/conf.qemu_arm_spl_na
\ No newline at end of file
-- 
2.33.1.1089.g2158813163f-goog

Re: [u-boot-test-hooks PATCH 7/7] ellesmere: Add qemu rules

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 1212 bytes --]

On Sat, Oct 30, 2021 at 12:25:39PM -0600, Simon Glass wrote:

> Add some symlinks so that qemu can be used on ellesmere.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
> 
>  bin/ellesmere/conf.qemu_arm_na     | 1 +
>  bin/ellesmere/conf.qemu_arm_spl_na | 1 +
>  2 files changed, 2 insertions(+)
>  create mode 120000 bin/ellesmere/conf.qemu_arm_na
>  create mode 120000 bin/ellesmere/conf.qemu_arm_spl_na

Alright, so I think the best use of the public u-boot-test-hooks is to
have first public CI used scripts (aka everything in {bin,py}/travis-ci)
and then we should move to having a reference directory.  It's not
useful to everyone for example to have symlinks like these here, for
your lab.  But it is very useful to have things like
bin/kea/conf.orangepi_pc_sjg-opi_pc which I used locally the other day
to make bin/bill-the-cat/conf.pine64_plus_na and I think everyone would
benefit from something like
bin/references/conf.sunxi_with_sdwire_and_digital-loggers so that anyone
else can figure out how to plumb in their own sunxi platform with sdwire
and then whatever reference they also need for power control, if not a
digital-loggers type "curl" solution.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

Re: [u-boot-test-hooks PATCH 7/7] ellesmere: Add qemu rules

[Simon Glass]

Hi Tom,

On Sun, 31 Oct 2021 at 10:57, Tom Rini <trini@konsulko.com> wrote:
>
> On Sat, Oct 30, 2021 at 12:25:39PM -0600, Simon Glass wrote:
>
> > Add some symlinks so that qemu can be used on ellesmere.
> >
> > Signed-off-by: Simon Glass <sjg@chromium.org>
> > ---
> >
> >  bin/ellesmere/conf.qemu_arm_na     | 1 +
> >  bin/ellesmere/conf.qemu_arm_spl_na | 1 +
> >  2 files changed, 2 insertions(+)
> >  create mode 120000 bin/ellesmere/conf.qemu_arm_na
> >  create mode 120000 bin/ellesmere/conf.qemu_arm_spl_na
>
> Alright, so I think the best use of the public u-boot-test-hooks is to
> have first public CI used scripts (aka everything in {bin,py}/travis-ci)
> and then we should move to having a reference directory.  It's not
> useful to everyone for example to have symlinks like these here, for
> your lab.  But it is very useful to have things like
> bin/kea/conf.orangepi_pc_sjg-opi_pc which I used locally the other day
> to make bin/bill-the-cat/conf.pine64_plus_na and I think everyone would
> benefit from something like
> bin/references/conf.sunxi_with_sdwire_and_digital-loggers so that anyone
> else can figure out how to plumb in their own sunxi platform with sdwire
> and then whatever reference they also need for power control, if not a
> digital-loggers type "curl" solution.

OK. Can you apply the other patches? Then I'll check and try some renames.

Regards,
Simon

Re: [u-boot-test-hooks PATCH 7/7] ellesmere: Add qemu rules

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 1591 bytes --]

On Sun, Oct 31, 2021 at 12:22:48PM -0600, Simon Glass wrote:
> Hi Tom,
> 
> On Sun, 31 Oct 2021 at 10:57, Tom Rini <trini@konsulko.com> wrote:
> >
> > On Sat, Oct 30, 2021 at 12:25:39PM -0600, Simon Glass wrote:
> >
> > > Add some symlinks so that qemu can be used on ellesmere.
> > >
> > > Signed-off-by: Simon Glass <sjg@chromium.org>
> > > ---
> > >
> > >  bin/ellesmere/conf.qemu_arm_na     | 1 +
> > >  bin/ellesmere/conf.qemu_arm_spl_na | 1 +
> > >  2 files changed, 2 insertions(+)
> > >  create mode 120000 bin/ellesmere/conf.qemu_arm_na
> > >  create mode 120000 bin/ellesmere/conf.qemu_arm_spl_na
> >
> > Alright, so I think the best use of the public u-boot-test-hooks is to
> > have first public CI used scripts (aka everything in {bin,py}/travis-ci)
> > and then we should move to having a reference directory.  It's not
> > useful to everyone for example to have symlinks like these here, for
> > your lab.  But it is very useful to have things like
> > bin/kea/conf.orangepi_pc_sjg-opi_pc which I used locally the other day
> > to make bin/bill-the-cat/conf.pine64_plus_na and I think everyone would
> > benefit from something like
> > bin/references/conf.sunxi_with_sdwire_and_digital-loggers so that anyone
> > else can figure out how to plumb in their own sunxi platform with sdwire
> > and then whatever reference they also need for power control, if not a
> > digital-loggers type "curl" solution.
> 
> OK. Can you apply the other patches? Then I'll check and try some renames.

I'll review the rest of the series soon, yes.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

Re: [u-boot-test-hooks PATCH 1/7] travis-ci: Add qemu_arm_spl board

[Tuomas Tynkkynen]

Hi,

On 30.10.2021 21.25, Simon Glass wrote:
> From: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>

^ Some mishap with the From: line here, since I did not write the patch?

> 
> This is similar to the existing qemu_arm target, except that the 'bios' is
> image.bin (containing both SPL and U-Boot) rather than in u-boot.bin
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---

Re: [u-boot-test-hooks PATCH 1/7] travis-ci: Add qemu_arm_spl board

[Tom Rini]

[-- Attachment #1: Type: text/plain, Size: 487 bytes --]

On Sat, Oct 30, 2021 at 12:25:33PM -0600, Simon Glass wrote:

> From: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
> 
> This is similar to the existing qemu_arm target, except that the 'bios' is
> image.bin (containing both SPL and U-Boot) rather than in u-boot.bin
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>

Aside from the wrong-From, for a v2 in the future, I'm holding off on
this until the passage stuff which makes use of this, is closer to going
in.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]