From: Iwona Winiarska <iwona.winiarska@intel.com>
To: linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devicetree@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>, Jonathan Corbet <corbet@lwn.net>,
Borislav Petkov <bp@alien8.de>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Tony Luck <tony.luck@intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Randy Dunlap <rdunlap@infradead.org>,
Zev Weiss <zweiss@equinix.com>,
David Muller <d.mueller@elsoft.ch>,
Dave Hansen <dave.hansen@intel.com>,
Iwona Winiarska <iwona.winiarska@intel.com>
Subject: [PATCH v3 03/13] ARM: dts: aspeed: Add PECI controller nodes
Date: Mon, 15 Nov 2021 19:25:42 +0100 [thread overview]
Message-ID: <20211115182552.3830849-4-iwona.winiarska@intel.com> (raw)
In-Reply-To: <20211115182552.3830849-1-iwona.winiarska@intel.com>
Add PECI controller nodes with all required information.
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 14 ++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b313a1cf5f73..cdaf6db4f07d 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -391,6 +391,20 @@ uart_routing: uart-routing@9c {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c7049454c7cb..1ff71c182c95 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -511,6 +511,20 @@ ibt: ibt@140 {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 5106a424f1ce..efd87ceb40b6 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -507,6 +507,20 @@ wdt4: watchdog@1e7850c0 {
status = "disabled";
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
lpc: lpc@1e789000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Iwona Winiarska <iwona.winiarska@intel.com>
To: linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-aspeed@lists.ozlabs.org, linux-doc@vger.kernel.org,
Dave Hansen <dave.hansen@intel.com>,
Zev Weiss <zweiss@equinix.com>,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
Jonathan Corbet <corbet@lwn.net>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Guenter Roeck <linux@roeck-us.net>,
devicetree@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
Arnd Bergmann <arnd@arndb.de>, Rob Herring <robh+dt@kernel.org>,
Borislav Petkov <bp@alien8.de>,
Iwona Winiarska <iwona.winiarska@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-arm-kernel@lists.infradead.org,
linux-hwmon@vger.kernel.org, Tony Luck <tony.luck@intel.com>,
Andrew Jeffery <andrew@aj.id.au>,
Randy Dunlap <rdunlap@infradead.org>,
Olof Johansson <olof@lixom.net>
Subject: [PATCH v3 03/13] ARM: dts: aspeed: Add PECI controller nodes
Date: Mon, 15 Nov 2021 19:25:42 +0100 [thread overview]
Message-ID: <20211115182552.3830849-4-iwona.winiarska@intel.com> (raw)
In-Reply-To: <20211115182552.3830849-1-iwona.winiarska@intel.com>
Add PECI controller nodes with all required information.
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 14 ++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b313a1cf5f73..cdaf6db4f07d 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -391,6 +391,20 @@ uart_routing: uart-routing@9c {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c7049454c7cb..1ff71c182c95 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -511,6 +511,20 @@ ibt: ibt@140 {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 5106a424f1ce..efd87ceb40b6 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -507,6 +507,20 @@ wdt4: watchdog@1e7850c0 {
status = "disabled";
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
lpc: lpc@1e789000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Iwona Winiarska <iwona.winiarska@intel.com>
To: linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devicetree@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>, Jonathan Corbet <corbet@lwn.net>,
Borislav Petkov <bp@alien8.de>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Tony Luck <tony.luck@intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Randy Dunlap <rdunlap@infradead.org>,
Zev Weiss <zweiss@equinix.com>,
David Muller <d.mueller@elsoft.ch>,
Dave Hansen <dave.hansen@intel.com>,
Iwona Winiarska <iwona.winiarska@intel.com>
Subject: [PATCH v3 03/13] ARM: dts: aspeed: Add PECI controller nodes
Date: Mon, 15 Nov 2021 19:25:42 +0100 [thread overview]
Message-ID: <20211115182552.3830849-4-iwona.winiarska@intel.com> (raw)
In-Reply-To: <20211115182552.3830849-1-iwona.winiarska@intel.com>
Add PECI controller nodes with all required information.
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 14 ++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b313a1cf5f73..cdaf6db4f07d 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -391,6 +391,20 @@ uart_routing: uart-routing@9c {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c7049454c7cb..1ff71c182c95 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -511,6 +511,20 @@ ibt: ibt@140 {
};
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 5106a424f1ce..efd87ceb40b6 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -507,6 +507,20 @@ wdt4: watchdog@1e7850c0 {
status = "disabled";
};
+ peci0: peci-controller@1e78b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ status = "disabled";
+ };
+
lpc: lpc@1e789000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
--
2.31.1
next prev parent reply other threads:[~2021-11-15 18:28 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 18:25 [PATCH v3 00/13] Introduce PECI subsystem Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 01/13] dt-bindings: Add generic bindings for PECI Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 02/13] dt-bindings: Add bindings for peci-aspeed Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska [this message]
2021-11-15 18:25 ` [PATCH v3 03/13] ARM: dts: aspeed: Add PECI controller nodes Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 04/13] peci: Add core infrastructure Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 05/13] peci: Add peci-aspeed controller driver Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-19 11:48 ` Govert Overgaauw
2021-11-15 18:25 ` [PATCH v3 06/13] peci: Add device detection Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:49 ` Greg Kroah-Hartman
2021-11-15 18:49 ` Greg Kroah-Hartman
2021-11-15 18:49 ` Greg Kroah-Hartman
2021-11-15 22:35 ` Winiarska, Iwona
2021-11-15 22:35 ` Winiarska, Iwona
2021-11-15 22:35 ` Winiarska, Iwona
2021-11-16 6:26 ` gregkh
2021-11-16 6:26 ` gregkh
2021-11-16 6:26 ` gregkh
2021-11-17 23:19 ` Winiarska, Iwona
2021-11-17 23:19 ` Winiarska, Iwona
2021-11-17 23:19 ` Winiarska, Iwona
2021-11-15 18:25 ` [PATCH v3 07/13] peci: Add sysfs interface for PECI bus Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 08/13] peci: Add support for PECI device drivers Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 09/13] peci: Add peci-cpu driver Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 10/13] hwmon: peci: Add cputemp driver Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-16 0:52 ` Guenter Roeck
2021-11-16 0:52 ` Guenter Roeck
2021-11-16 0:52 ` Guenter Roeck
2021-11-17 22:20 ` Winiarska, Iwona
2021-11-17 22:20 ` Winiarska, Iwona
2021-11-17 22:20 ` Winiarska, Iwona
2021-11-15 18:25 ` [PATCH v3 11/13] hwmon: peci: Add dimmtemp driver Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 12/13] docs: hwmon: Document PECI drivers Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` [PATCH v3 13/13] docs: Add PECI documentation Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-15 18:25 ` Iwona Winiarska
2021-11-17 3:56 ` [PATCH v3 00/13] Introduce PECI subsystem Zev Weiss
2021-11-17 3:56 ` Zev Weiss
2021-11-17 3:56 ` Zev Weiss
2021-11-17 23:25 ` Winiarska, Iwona
2021-11-17 23:25 ` Winiarska, Iwona
2021-11-17 23:25 ` Winiarska, Iwona
2021-11-18 12:19 ` Tomer Maimon
2021-11-18 21:51 ` Winiarska, Iwona
2021-11-18 21:51 ` Winiarska, Iwona
2021-11-18 21:51 ` Winiarska, Iwona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211115182552.3830849-4-iwona.winiarska@intel.com \
--to=iwona.winiarska@intel.com \
--cc=andrew@aj.id.au \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=d.mueller@elsoft.ch \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jae.hyun.yoo@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=olof@lixom.net \
--cc=openbmc@lists.ozlabs.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=tony.luck@intel.com \
--cc=zweiss@equinix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.