[PATCH v5 0/7] drm: sun4i: dsi: Convert drm bridge

From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Robert Foss <robert.foss@linaro.org>,
	Sam Ravnborg <sam@ravnborg.org>
Cc: linux-sunxi@googlegroups.com, linux-amarula@amarulasolutions.com,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v5 0/7] drm: sun4i: dsi: Convert drm bridge
Date: Mon, 22 Nov 2021 12:22:16 +0530	[thread overview]
Message-ID: <20211122065223.88059-1-jagan@amarulasolutions.com> (raw)

This series convert Allwinner DSI controller to full functional 
drm bridge driver for supporting all variants of DSI devices.

Here, are the previous version changes[1].

Patch 1: Drop the DRM bind race while attaching bridges

Patch 2: Move component_add into sun6i_dsi_attach

Patch 3: Convert the encoder to bridge driver

Patch 4: Add mode_set API

Patch 5: Enable DSI Panel

Patch 6: Enable DSI Bridge

Patch 7: Enable DSI Bridge (I2C)

[1] https://www.spinics.net/lists/arm-kernel/msg883560.html

Any inputs?
Jagan.

Jagan Teki (7):
  drm: sun4i: dsi: Drop DRM bind race with bridge attach
  drm: sun4i: dsi: Add component only once DSI device attached
  drm: sun4i: dsi: Convert to bridge driver
  drm: sun4i: dsi: Add mode_set function
  [DO NOT MERGE] ARM: dts: sun8i: bananapi-m2m: Enable S070WV20-CT16 Panel
  [DO NOT MERGE] ARM: dts: sun8i: bananapi-m2m: Enable ICN6211 DSI Bridge
  [DO NOT MERGE] ARM: dts: sun8i: Enable DLPC3433 Bridge (I2C)

 arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts |  63 ++++++
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c       | 225 ++++++++++++-------
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h       |   9 +-
 3 files changed, 218 insertions(+), 79 deletions(-)

-- 
2.25.1