From: Tudor Ambarus <tudor.ambarus@microchip.com> To: <michael@walle.cc>, <vigneshr@ti.com>, <p.yadav@ti.com> Cc: macromorgan@hotmail.com, jaimeliao@mxic.com.tw, Tudor Ambarus <tudor.ambarus@microchip.com>, richard@nod.at, esben@geanix.com, linux@rasmusvillemoes.dk, knaerzche@gmail.com, nicolas.ferre@microchip.com, linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org, code@reto-schneider.ch, miquel.raynal@bootlin.com, heiko.thiery@gmail.com, sr@denx.de, mail@david-bauer.net, zhengxunli@mxic.com.tw Subject: [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP Date: Mon, 22 Nov 2021 11:50:19 +0200 [thread overview] Message-ID: <20211122095020.393346-13-tudor.ambarus@microchip.com> (raw) In-Reply-To: <20211122095020.393346-1-tudor.ambarus@microchip.com> Get rid of the static initialization of the flash parameters and init them when parsing SFDP. Generated a 256 Kbyte random data and did an erase, write, read back and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec, for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_1_1_4_4B 0x34. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> --- v4: use new flag macros root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id c84019 root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer gigadevice root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname gd25q256 root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > gd25q256-sfdp xxd -p sfdp-gd25q256 53464450060102ff00060110300000ffc8000103900000ff84000102c000 00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b 083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9 1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9 7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff sha1sum sfdp-gd25q256 9f25eb3b17832b26dbba288f1b07de1f8a42e446 sfdp-gd25q256 drivers/mtd/spi-nor/gigadevice.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c index 94634797fdd6..e9817233c51f 100644 --- a/drivers/mtd/spi-nor/gigadevice.c +++ b/drivers/mtd/spi-nor/gigadevice.c @@ -53,9 +53,8 @@ static const struct flash_info gigadevice_parts[] = { NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512) - FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | - SPI_NOR_TB_SR_BIT6) - NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) + PARSE_SFDP + FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6) FIXUP_FLAGS(SPI_NOR_4B_OPCODES) .fixups = &gd25q256_fixups }, }; -- 2.25.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Tudor Ambarus <tudor.ambarus@microchip.com> To: <michael@walle.cc>, <vigneshr@ti.com>, <p.yadav@ti.com> Cc: macromorgan@hotmail.com, jaimeliao@mxic.com.tw, Tudor Ambarus <tudor.ambarus@microchip.com>, richard@nod.at, esben@geanix.com, linux@rasmusvillemoes.dk, knaerzche@gmail.com, linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org, code@reto-schneider.ch, miquel.raynal@bootlin.com, heiko.thiery@gmail.com, sr@denx.de, figgyc@figgyc.uk, mail@david-bauer.net, zhengxunli@mxic.com.tw Subject: [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP Date: Mon, 22 Nov 2021 11:50:19 +0200 [thread overview] Message-ID: <20211122095020.393346-13-tudor.ambarus@microchip.com> (raw) In-Reply-To: <20211122095020.393346-1-tudor.ambarus@microchip.com> Get rid of the static initialization of the flash parameters and init them when parsing SFDP. Generated a 256 Kbyte random data and did an erase, write, read back and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec, for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_1_1_4_4B 0x34. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> --- v4: use new flag macros root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/jedec_id c84019 root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/manufacturer gigadevice root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/partname gd25q256 root@sama5d2-xplained:~# cat /sys/devices/platform/ahb/ahb:apb/f0020000.spi/spi_master/spi1/spi1.0/spi-nor/sfdp > gd25q256-sfdp xxd -p sfdp-gd25q256 53464450060102ff00060110300000ffc8000103900000ff84000102c000 00ffffffffffffffffffffffffffffffffffe520f3ffffffff0f44eb086b 083b42bbeeffffffffff00ffffff00ff0c200f5210d800ff4262c9fe82e9 1458ec6006337a757a7504bdd55c0006440008500001ffffffffffffffff ffffffffffffffffffffffffffffffffffffffffffffffff003600279cf9 7764fccb58e3ffffffffffffffffffffffffffffffffffffffffffffffff sha1sum sfdp-gd25q256 9f25eb3b17832b26dbba288f1b07de1f8a42e446 sfdp-gd25q256 drivers/mtd/spi-nor/gigadevice.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c index 94634797fdd6..e9817233c51f 100644 --- a/drivers/mtd/spi-nor/gigadevice.c +++ b/drivers/mtd/spi-nor/gigadevice.c @@ -53,9 +53,8 @@ static const struct flash_info gigadevice_parts[] = { NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512) - FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | - SPI_NOR_TB_SR_BIT6) - NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) + PARSE_SFDP + FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6) FIXUP_FLAGS(SPI_NOR_4B_OPCODES) .fixups = &gd25q256_fixups }, }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-22 10:47 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-22 9:50 [PATCH v4 00/13] mtd: spi-nor: Clean params init Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 9:50 ` [PATCH v4 01/13] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 18:28 ` Michael Walle 2021-11-22 18:28 ` Michael Walle 2021-11-30 9:56 ` Pratyush Yadav 2021-11-30 9:56 ` Pratyush Yadav 2021-12-03 12:03 ` Tudor.Ambarus 2021-12-03 12:03 ` Tudor.Ambarus 2021-11-22 9:50 ` [PATCH v4 02/13] mtd: spi-nor: Introduce spi_nor_set_mtd_info() Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-12-02 9:19 ` Pratyush Yadav 2021-12-02 9:19 ` Pratyush Yadav 2021-12-03 12:03 ` Tudor.Ambarus 2021-12-03 12:03 ` Tudor.Ambarus 2021-11-22 9:50 ` [PATCH v4 03/13] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-12-02 9:31 ` Pratyush Yadav 2021-12-02 9:31 ` Pratyush Yadav 2021-11-22 9:50 ` [PATCH v4 04/13] mtd: spi-nor: core: Introduce flash_info mfr_flags Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 18:34 ` Michael Walle 2021-11-22 18:34 ` Michael Walle 2021-11-23 6:43 ` Tudor.Ambarus 2021-11-23 6:43 ` Tudor.Ambarus 2021-12-02 9:32 ` Pratyush Yadav 2021-12-02 9:32 ` Pratyush Yadav 2021-11-22 9:50 ` [PATCH v4 05/13] mtd: spi-nor: Rework the flash_info flags Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-12-02 10:01 ` Pratyush Yadav 2021-12-02 10:01 ` Pratyush Yadav 2021-11-22 9:50 ` [PATCH v4 06/13] mtd: spi-nor: Introduce spi_nor_init_flags() Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 9:50 ` [PATCH v4 07/13] mtd: spi-nor: Introduce spi_nor_init_fixup_flags() Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 9:50 ` [PATCH v4 08/13] mtd: spi-nor: core: Init all flash parameters based on SFDP where possible Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 9:50 ` [PATCH v4 09/13] mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup() Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 9:50 ` [PATCH v4 10/13] mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 9:50 ` [PATCH v4 11/13] mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus [this message] 2021-11-22 9:50 ` [PATCH v4 12/13] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP Tudor Ambarus 2021-11-22 18:19 ` Michael Walle 2021-11-22 18:19 ` Michael Walle 2021-11-22 9:50 ` [PATCH v4 13/13] mtd: spi-nor: issi: is25lp256: " Tudor Ambarus 2021-11-22 9:50 ` Tudor Ambarus
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211122095020.393346-13-tudor.ambarus@microchip.com \ --to=tudor.ambarus@microchip.com \ --cc=code@reto-schneider.ch \ --cc=esben@geanix.com \ --cc=heiko.thiery@gmail.com \ --cc=jaimeliao@mxic.com.tw \ --cc=knaerzche@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mtd@lists.infradead.org \ --cc=linux@rasmusvillemoes.dk \ --cc=macromorgan@hotmail.com \ --cc=mail@david-bauer.net \ --cc=michael@walle.cc \ --cc=miquel.raynal@bootlin.com \ --cc=nicolas.ferre@microchip.com \ --cc=p.yadav@ti.com \ --cc=richard@nod.at \ --cc=sr@denx.de \ --cc=vigneshr@ti.com \ --cc=zhengxunli@mxic.com.tw \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.