* [PATCH v2 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-12-02 13:06 ` Hans Verkuil
2021-11-24 17:59 ` [PATCH v2 02/19] media: camss: csiphy-3ph: don't print HW version as an error Bryan O'Donoghue
` (17 subsequent siblings)
18 siblings, 1 reply; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Add bindings for qcom,sm8250-camss in order to support the camera
subsystem for SM8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../bindings/media/qcom,sm8250-camss.yaml | 450 ++++++++++++++++++
1 file changed, 450 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 000000000000..af877d61b607
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,450 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+ compatible:
+ const: qcom,sm8250-camss
+
+ clocks:
+ minItems: 37
+ maxItems: 37
+
+ clock-names:
+ items:
+ - const: cam_ahb_clk
+ - const: cam_hf_axi
+ - const: cam_sf_axi
+ - const: camnoc_axi
+ - const: camnoc_axi_src
+ - const: core_ahb
+ - const: cpas_ahb
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: csiphy4
+ - const: csiphy4_timer
+ - const: csiphy5
+ - const: csiphy5_timer
+ - const: slow_ahb_src
+ - const: vfe0_ahb
+ - const: vfe0_axi
+ - const: vfe0
+ - const: vfe0_cphy_rx
+ - const: vfe0_csid
+ - const: vfe0_areg
+ - const: vfe1_ahb
+ - const: vfe1_axi
+ - const: vfe1
+ - const: vfe1_cphy_rx
+ - const: vfe1_csid
+ - const: vfe1_areg
+ - const: vfe_lite_ahb
+ - const: vfe_lite_axi
+ - const: vfe_lite
+ - const: vfe_lite_cphy_rx
+ - const: vfe_lite_csid
+
+ interrupts:
+ minItems: 14
+ maxItems: 14
+
+ interrupt-names:
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+ iommus:
+ minItems: 8
+ maxItems: 8
+
+ interconnects:
+ minItems: 4
+ maxItems: 4
+
+ interconnect-names:
+ items:
+ - const: cam_ahb
+ - const: cam_hf_0_mnoc
+ - const: cam_sf_0_mnoc
+ - const: cam_sf_icp_mnoc
+
+ power-domains:
+ items:
+ - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@4:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@5:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ reg:
+ minItems: 10
+ maxItems: 10
+
+ reg-names:
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interconnects
+ - interconnect-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss: camss@ac6a000 {
+ compatible = "qcom,sm8250-camss";
+
+ reg = <0 0xac6a000 0 0x2000>,
+ <0 0xac6c000 0 0x2000>,
+ <0 0xac6e000 0 0x1000>,
+ <0 0xac70000 0 0x1000>,
+ <0 0xac72000 0 0x1000>,
+ <0 0xac74000 0 0x1000>,
+ <0 0xacb4000 0 0xd000>,
+ <0 0xacc3000 0 0xd000>,
+ <0 0xacd9000 0 0x2200>,
+ <0 0xacdb200 0 0x2200>;
+ reg-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+ <&camcc CAM_CC_CORE_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_IFE_0_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_0_AREG_CLK>,
+ <&camcc CAM_CC_IFE_1_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_AREG_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+ clock-names = "cam_ahb_clk",
+ "cam_hf_axi",
+ "cam_sf_axi",
+ "camnoc_axi",
+ "camnoc_axi_src",
+ "core_ahb",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "slow_ahb_src",
+ "vfe0_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe0_areg",
+ "vfe1_ahb",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe1_areg",
+ "vfe_lite_ahb",
+ "vfe_lite_axi",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ iommus = <&apps_smmu 0x800 0x400>,
+ <&apps_smmu 0x801 0x400>,
+ <&apps_smmu 0x840 0x400>,
+ <&apps_smmu 0x841 0x400>,
+ <&apps_smmu 0xC00 0x400>,
+ <&apps_smmu 0xC01 0x400>,
+ <&apps_smmu 0xC40 0x400>,
+ <&apps_smmu 0xC41 0x400>;
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
+ <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_0_mnoc",
+ "cam_sf_0_mnoc",
+ "cam_sf_icp_mnoc";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* Re: [PATCH v2 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
2021-11-24 17:59 ` [PATCH v2 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Bryan O'Donoghue
@ 2021-12-02 13:06 ` Hans Verkuil
2021-12-02 13:11 ` Bryan O'Donoghue
0 siblings, 1 reply; 25+ messages in thread
From: Hans Verkuil @ 2021-12-02 13:06 UTC (permalink / raw)
To: Bryan O'Donoghue, linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink
Hi Bryan,
This patch needs to be CC-ed to devicetree@vger.kernel.org. I need an Acked-by from
the device tree maintainers before I can merge this series.
Everything else looks good, it's the only thing preventing this from merging.
Regards,
Hans
On 24/11/2021 18:59, Bryan O'Donoghue wrote:
> From: Jonathan Marek <jonathan@marek.ca>
>
> Add bindings for qcom,sm8250-camss in order to support the camera
> subsystem for SM8250.
>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> .../bindings/media/qcom,sm8250-camss.yaml | 450 ++++++++++++++++++
> 1 file changed, 450 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
> new file mode 100644
> index 000000000000..af877d61b607
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
> @@ -0,0 +1,450 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
> + - Robert Foss <robert.foss@linaro.org>
> +
> +description: |
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
> +
> +properties:
> + compatible:
> + const: qcom,sm8250-camss
> +
> + clocks:
> + minItems: 37
> + maxItems: 37
> +
> + clock-names:
> + items:
> + - const: cam_ahb_clk
> + - const: cam_hf_axi
> + - const: cam_sf_axi
> + - const: camnoc_axi
> + - const: camnoc_axi_src
> + - const: core_ahb
> + - const: cpas_ahb
> + - const: csiphy0
> + - const: csiphy0_timer
> + - const: csiphy1
> + - const: csiphy1_timer
> + - const: csiphy2
> + - const: csiphy2_timer
> + - const: csiphy3
> + - const: csiphy3_timer
> + - const: csiphy4
> + - const: csiphy4_timer
> + - const: csiphy5
> + - const: csiphy5_timer
> + - const: slow_ahb_src
> + - const: vfe0_ahb
> + - const: vfe0_axi
> + - const: vfe0
> + - const: vfe0_cphy_rx
> + - const: vfe0_csid
> + - const: vfe0_areg
> + - const: vfe1_ahb
> + - const: vfe1_axi
> + - const: vfe1
> + - const: vfe1_cphy_rx
> + - const: vfe1_csid
> + - const: vfe1_areg
> + - const: vfe_lite_ahb
> + - const: vfe_lite_axi
> + - const: vfe_lite
> + - const: vfe_lite_cphy_rx
> + - const: vfe_lite_csid
> +
> + interrupts:
> + minItems: 14
> + maxItems: 14
> +
> + interrupt-names:
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csiphy3
> + - const: csiphy4
> + - const: csiphy5
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: vfe0
> + - const: vfe1
> + - const: vfe_lite0
> + - const: vfe_lite1
> +
> + iommus:
> + minItems: 8
> + maxItems: 8
> +
> + interconnects:
> + minItems: 4
> + maxItems: 4
> +
> + interconnect-names:
> + items:
> + - const: cam_ahb
> + - const: cam_hf_0_mnoc
> + - const: cam_sf_0_mnoc
> + - const: cam_sf_icp_mnoc
> +
> + power-domains:
> + items:
> + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@4:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@5:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + reg:
> + minItems: 10
> + maxItems: 10
> +
> + reg-names:
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csiphy3
> + - const: csiphy4
> + - const: csiphy5
> + - const: vfe0
> + - const: vfe1
> + - const: vfe_lite0
> + - const: vfe_lite1
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
> + - interconnects
> + - interconnect-names
> + - interrupts
> + - interrupt-names
> + - iommus
> + - power-domains
> + - reg
> + - reg-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,camcc-sm8250.h>
> + #include <dt-bindings/interconnect/qcom,sm8250.h>
> + #include <dt-bindings/clock/qcom,gcc-sm8250.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + camss: camss@ac6a000 {
> + compatible = "qcom,sm8250-camss";
> +
> + reg = <0 0xac6a000 0 0x2000>,
> + <0 0xac6c000 0 0x2000>,
> + <0 0xac6e000 0 0x1000>,
> + <0 0xac70000 0 0x1000>,
> + <0 0xac72000 0 0x1000>,
> + <0 0xac74000 0 0x1000>,
> + <0 0xacb4000 0 0xd000>,
> + <0 0xacc3000 0 0xd000>,
> + <0 0xacd9000 0 0x2200>,
> + <0 0xacdb200 0 0x2200>;
> + reg-names = "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + power-domains = <&camcc IFE_0_GDSC>,
> + <&camcc IFE_1_GDSC>,
> + <&camcc TITAN_TOP_GDSC>;
> +
> + clocks = <&gcc GCC_CAMERA_AHB_CLK>,
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&gcc GCC_CAMERA_SF_AXI_CLK>,
> + <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
> + <&camcc CAM_CC_CORE_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_AHB_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY1_CLK>,
> + <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY2_CLK>,
> + <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY3_CLK>,
> + <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY4_CLK>,
> + <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY5_CLK>,
> + <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
> + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
> + <&camcc CAM_CC_IFE_0_AHB_CLK>,
> + <&camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_0_AREG_CLK>,
> + <&camcc CAM_CC_IFE_1_AHB_CLK>,
> + <&camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&camcc CAM_CC_IFE_1_CLK>,
> + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&camcc CAM_CC_IFE_1_AREG_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
> + clock-names = "cam_ahb_clk",
> + "cam_hf_axi",
> + "cam_sf_axi",
> + "camnoc_axi",
> + "camnoc_axi_src",
> + "core_ahb",
> + "cpas_ahb",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "csiphy5",
> + "csiphy5_timer",
> + "slow_ahb_src",
> + "vfe0_ahb",
> + "vfe0_axi",
> + "vfe0",
> + "vfe0_cphy_rx",
> + "vfe0_csid",
> + "vfe0_areg",
> + "vfe1_ahb",
> + "vfe1_axi",
> + "vfe1",
> + "vfe1_cphy_rx",
> + "vfe1_csid",
> + "vfe1_areg",
> + "vfe_lite_ahb",
> + "vfe_lite_axi",
> + "vfe_lite",
> + "vfe_lite_cphy_rx",
> + "vfe_lite_csid";
> +
> + iommus = <&apps_smmu 0x800 0x400>,
> + <&apps_smmu 0x801 0x400>,
> + <&apps_smmu 0x840 0x400>,
> + <&apps_smmu 0x841 0x400>,
> + <&apps_smmu 0xC00 0x400>,
> + <&apps_smmu 0xC01 0x400>,
> + <&apps_smmu 0xC40 0x400>,
> + <&apps_smmu 0xC41 0x400>;
> +
> + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
> + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
> + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
> + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
> + interconnect-names = "cam_ahb",
> + "cam_hf_0_mnoc",
> + "cam_sf_0_mnoc",
> + "cam_sf_icp_mnoc";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
>
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v2 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
2021-12-02 13:06 ` Hans Verkuil
@ 2021-12-02 13:11 ` Bryan O'Donoghue
0 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-12-02 13:11 UTC (permalink / raw)
To: Hans Verkuil, linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink
On 02/12/2021 13:06, Hans Verkuil wrote:
> Hi Bryan,
>
> This patch needs to be CC-ed to devicetree@vger.kernel.org. I need an Acked-by from
> the device tree maintainers before I can merge this series.
>
> Everything else looks good, it's the only thing preventing this from merging.
>
> Regards,
>
> Hans
np
I'll resend with a cc
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v2 02/19] media: camss: csiphy-3ph: don't print HW version as an error
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 03/19] media: camss: csiphy-3ph: disable interrupts Bryan O'Donoghue
` (16 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Avoid unnecessary noise in normal usage (it prints every time CSIPHY is
powered on).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index e318c822ab04..5948abdcd220 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -163,7 +163,7 @@ static void csiphy_hw_version_read(struct csiphy_device *csiphy,
hw_version |= readl_relaxed(csiphy->base +
CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(15)) << 24;
- dev_err(dev, "CSIPHY 3PH HW Version = 0x%08x\n", hw_version);
+ dev_dbg(dev, "CSIPHY 3PH HW Version = 0x%08x\n", hw_version);
}
/*
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 03/19] media: camss: csiphy-3ph: disable interrupts
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 01/19] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 02/19] media: camss: csiphy-3ph: don't print HW version as an error Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 04/19] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Bryan O'Donoghue
` (15 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
The driver does nothing with the interrupts, so set the irq mask registers
to zero to avoid wasting CPU time for nothing.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../qcom/camss/camss-csiphy-3ph-1-0.c | 35 ++-----------------
1 file changed, 3 insertions(+), 32 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 5948abdcd220..783b65295d20 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -352,38 +352,9 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
else if (csiphy->camss->version == CAMSS_845)
csiphy_gen2_config_lanes(csiphy, settle_cnt);
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(11));
-
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(12));
-
- val = 0xfb;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(13));
-
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(14));
-
- val = 0x7f;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(15));
-
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(16));
-
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(17));
-
- val = 0xef;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(18));
-
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(19));
-
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(20));
-
- val = 0xff;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(21));
+ /* IRQ_MASK registers - disable all interrupts */
+ for (i = 11; i < 22; i++)
+ writel_relaxed(0, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(i));
}
static void csiphy_lanes_disable(struct csiphy_device *csiphy,
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 04/19] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (2 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 03/19] media: camss: csiphy-3ph: disable interrupts Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 05/19] media: camss: csid-170: fix non-10bit formats Bryan O'Donoghue
` (14 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Add support for CSIPHY (2PH/DPHY mode) found on SM8250 hardware.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../qcom/camss/camss-csiphy-3ph-1-0.c | 147 ++++++++++++++++--
drivers/media/platform/qcom/camss/camss.h | 1 +
2 files changed, 139 insertions(+), 9 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 783b65295d20..c5b0a91b36f8 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -62,6 +62,7 @@ struct csiphy_reg_t {
u32 csiphy_param_type;
};
+/* GEN2 1.0 2PH */
static const struct
csiphy_reg_t lane_regs_sdm845[5][14] = {
{
@@ -146,6 +147,121 @@ csiphy_reg_t lane_regs_sdm845[5][14] = {
},
};
+/* GEN2 1.2.1 2PH */
+static const struct
+csiphy_reg_t lane_regs_sm8250[5][20] = {
+ {
+ {0x0030, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0900, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0908, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0904, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0904, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0034, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0010, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x001C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0008, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0000, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0024, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0730, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C80, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C88, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C84, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C84, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0734, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0710, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x071C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0708, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x070c, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0724, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0230, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0A00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0A08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0A04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0A04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0234, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0210, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x021C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0208, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0200, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x020c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0224, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0430, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0B00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0B08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0B04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0B04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0434, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0410, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x041C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0408, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0400, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x040c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0424, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0630, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C00, 0x05, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C08, 0x10, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C04, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0C04, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0634, 0x07, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0610, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x061C, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0608, 0x10, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x0600, 0x8D, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x060c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0624, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0800, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0884, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+};
+
static void csiphy_hw_version_read(struct csiphy_device *csiphy,
struct device *dev)
{
@@ -298,13 +414,25 @@ static void csiphy_gen1_config_lanes(struct csiphy_device *csiphy,
static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
u8 settle_cnt)
{
- int i, l;
+ const struct csiphy_reg_t *r;
+ int i, l, array_size;
u32 val;
- for (l = 0; l < 5; l++) {
- for (i = 0; i < 14; i++) {
- const struct csiphy_reg_t *r = &lane_regs_sdm845[l][i];
+ switch (csiphy->camss->version) {
+ case CAMSS_845:
+ r = &lane_regs_sdm845[0][0];
+ array_size = ARRAY_SIZE(lane_regs_sdm845[0]);
+ break;
+ case CAMSS_8250:
+ r = &lane_regs_sm8250[0][0];
+ array_size = ARRAY_SIZE(lane_regs_sm8250[0]);
+ break;
+ default:
+ unreachable();
+ }
+ for (l = 0; l < 5; l++) {
+ for (i = 0; i < array_size; i++, r++) {
switch (r->csiphy_param_type) {
case CSIPHY_SETTLE_CNT_LOWER_BYTE:
val = settle_cnt & 0xff;
@@ -325,13 +453,15 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
s64 link_freq, u8 lane_mask)
{
struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg;
+ bool is_gen2 = (csiphy->camss->version == CAMSS_845 ||
+ csiphy->camss->version == CAMSS_8250);
u8 settle_cnt;
u8 val;
int i;
settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate);
- val = BIT(c->clk.pos);
+ val = is_gen2 ? BIT(7) : BIT(c->clk.pos);
for (i = 0; i < c->num_data; i++)
val |= BIT(c->data[i].pos * 2);
@@ -346,11 +476,10 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
val = 0x00;
writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0));
- if (csiphy->camss->version == CAMSS_8x16 ||
- csiphy->camss->version == CAMSS_8x96)
- csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt);
- else if (csiphy->camss->version == CAMSS_845)
+ if (is_gen2)
csiphy_gen2_config_lanes(csiphy, settle_cnt);
+ else
+ csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt);
/* IRQ_MASK registers - disable all interrupts */
for (i = 11; i < 22; i++)
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index dc8b4154f92b..377e2474a485 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -69,6 +69,7 @@ enum camss_version {
CAMSS_8x96,
CAMSS_660,
CAMSS_845,
+ CAMSS_8250,
};
struct camss {
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 05/19] media: camss: csid-170: fix non-10bit formats
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (3 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 04/19] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 06/19] media: camss: csid-170: don't enable unused irqs Bryan O'Donoghue
` (13 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Use the decode_format/data_type from the "format" struct instead of a
hardcoded 10-bit format.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index ac22ff29d2a9..aa65043c3303 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -366,7 +366,7 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val |= input_format->width & 0x1fff << TPG_DT_n_CFG_0_FRAME_WIDTH;
writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_0(0));
- val = DATA_TYPE_RAW_10BIT << TPG_DT_n_CFG_1_DATA_TYPE;
+ val = format->data_type << TPG_DT_n_CFG_1_DATA_TYPE;
writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_1(0));
val = tg->mode << TPG_DT_n_CFG_2_PAYLOAD_MODE;
@@ -382,8 +382,9 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val = 1 << RDI_CFG0_BYTE_CNTR_EN;
val |= 1 << RDI_CFG0_FORMAT_MEASURE_EN;
val |= 1 << RDI_CFG0_TIMESTAMP_EN;
+ /* note: for non-RDI path, this should be format->decode_format */
val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
- val |= DATA_TYPE_RAW_10BIT << RDI_CFG0_DATA_TYPE;
+ val |= format->data_type << RDI_CFG0_DATA_TYPE;
val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
val |= dt_id << RDI_CFG0_DT_ID;
writel_relaxed(val, csid->base + CSID_RDI_CFG0(0));
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 06/19] media: camss: csid-170: don't enable unused irqs
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (4 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 05/19] media: camss: csid-170: fix non-10bit formats Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 07/19] media: camss: csid-170: remove stray comment Bryan O'Donoghue
` (12 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
csid_isr() only checks for the reset irq, so enabling any other irqs
doesn't make sense. The "RDI irq" comment is also wrong, the register
should be CSID_CSI2_RDIN_IRQ_MASK. Without this fix there may be an
excessive amount of irqs.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index aa65043c3303..a006c8dbceb1 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -444,12 +444,6 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val |= 1 << CSI2_RX_CFG1_MISR_EN;
writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1); // csi2_vc_mode_shift_val ?
- /* error irqs start at BIT(11) */
- writel_relaxed(~0u, csid->base + CSID_CSI2_RX_IRQ_MASK);
-
- /* RDI irq */
- writel_relaxed(~0u, csid->base + CSID_TOP_IRQ_MASK);
-
val = 1 << RDI_CTRL_HALT_CMD;
writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
}
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 07/19] media: camss: csid-170: remove stray comment
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (5 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 06/19] media: camss: csid-170: don't enable unused irqs Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 08/19] media: camss: csid-170: support more than one lite vfe Bryan O'Donoghue
` (11 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
This is a leftover from my original patches, it doesn't serve any purpose.
(it was a reminder to figure out how downstream sets a particular field in
the register).
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index a006c8dbceb1..f0c6a72592f9 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -442,7 +442,7 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN;
val |= 1 << CSI2_RX_CFG1_MISR_EN;
- writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1); // csi2_vc_mode_shift_val ?
+ writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
val = 1 << RDI_CTRL_HALT_CMD;
writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 08/19] media: camss: csid-170: support more than one lite vfe
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (6 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 07/19] media: camss: csid-170: remove stray comment Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 09/19] media: camss: csid-170: set the right HALT_CMD when disabled Bryan O'Donoghue
` (10 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Change the IS_LITE condition so that it returns true for the second lite
vfe found on titan 480 hardware (8250), which will have id == 3.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index f0c6a72592f9..2c84d40fe3e0 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -21,7 +21,7 @@
* interface support. As a result of that it has an
* alternate register layout.
*/
-#define IS_LITE (csid->id == 2 ? 1 : 0)
+#define IS_LITE (csid->id >= 2 ? 1 : 0)
#define CSID_HW_VERSION 0x0
#define HW_VERSION_STEPPING 0
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 09/19] media: camss: csid-170: set the right HALT_CMD when disabled
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (7 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 08/19] media: camss: csid-170: support more than one lite vfe Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 10/19] media: camss: csid: allow csid to work without a regulator Bryan O'Donoghue
` (9 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Use the "HALT_CMD_RESUME_AT_FRAME_BOUNDARY" define instead of a "1" which
is otherwise confusing, and add a "HALT_CMD_HALT_AT_FRAME_BOUNDARY" which
is set when disabling.
Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index 2c84d40fe3e0..22a7d7ad6340 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -105,7 +105,8 @@
#define CSID_RDI_CTRL(rdi) ((IS_LITE ? 0x208 : 0x308)\
+ 0x100 * (rdi))
#define RDI_CTRL_HALT_CMD 0
-#define ALT_CMD_RESUME_AT_FRAME_BOUNDARY 1
+#define HALT_CMD_HALT_AT_FRAME_BOUNDARY 0
+#define HALT_CMD_RESUME_AT_FRAME_BOUNDARY 1
#define RDI_CTRL_HALT_MODE 2
#define CSID_RDI_FRM_DROP_PATTERN(rdi) ((IS_LITE ? 0x20C : 0x30C)\
@@ -444,7 +445,10 @@ static void csid_configure_stream(struct csid_device *csid, u8 enable)
val |= 1 << CSI2_RX_CFG1_MISR_EN;
writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1);
- val = 1 << RDI_CTRL_HALT_CMD;
+ if (enable)
+ val = HALT_CMD_RESUME_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
+ else
+ val = HALT_CMD_HALT_AT_FRAME_BOUNDARY << RDI_CTRL_HALT_CMD;
writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
}
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 10/19] media: camss: csid: allow csid to work without a regulator
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (8 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 09/19] media: camss: csid-170: set the right HALT_CMD when disabled Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 11/19] media: camss: remove vdda-csiN from sdm845 resources Bryan O'Donoghue
` (8 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
At least for titan HW, CSID don't have an associated regulator. This change
is necessary to be able to model this in the CSID resources.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index a1637b78568b..1226913c623b 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -160,7 +160,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
if (ret < 0)
return ret;
- ret = regulator_enable(csid->vdda);
+ ret = csid->vdda ? regulator_enable(csid->vdda) : 0;
if (ret < 0) {
pm_runtime_put_sync(dev);
return ret;
@@ -168,14 +168,16 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
ret = csid_set_clock_rates(csid);
if (ret < 0) {
- regulator_disable(csid->vdda);
+ if (csid->vdda)
+ regulator_disable(csid->vdda);
pm_runtime_put_sync(dev);
return ret;
}
ret = camss_enable_clocks(csid->nclocks, csid->clock, dev);
if (ret < 0) {
- regulator_disable(csid->vdda);
+ if (csid->vdda)
+ regulator_disable(csid->vdda);
pm_runtime_put_sync(dev);
return ret;
}
@@ -186,7 +188,8 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
if (ret < 0) {
disable_irq(csid->irq);
camss_disable_clocks(csid->nclocks, csid->clock);
- regulator_disable(csid->vdda);
+ if (csid->vdda)
+ regulator_disable(csid->vdda);
pm_runtime_put_sync(dev);
return ret;
}
@@ -195,7 +198,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
} else {
disable_irq(csid->irq);
camss_disable_clocks(csid->nclocks, csid->clock);
- ret = regulator_disable(csid->vdda);
+ ret = csid->vdda ? regulator_disable(csid->vdda) : 0;
pm_runtime_put_sync(dev);
}
@@ -631,7 +634,9 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
/* Regulator */
- csid->vdda = devm_regulator_get(dev, res->regulator[0]);
+ csid->vdda = NULL;
+ if (res->regulator[0])
+ csid->vdda = devm_regulator_get(dev, res->regulator[0]);
if (IS_ERR(csid->vdda)) {
dev_err(dev, "could not get regulator\n");
return PTR_ERR(csid->vdda);
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 11/19] media: camss: remove vdda-csiN from sdm845 resources
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (9 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 10/19] media: camss: csid: allow csid to work without a regulator Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 12/19] media: camss: fix VFE irq name Bryan O'Donoghue
` (7 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
This isn't used and only works because devm_regulator_get() returns a dummy
regulator.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index be091c50a3c0..71c6109b0526 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -542,7 +542,7 @@ static const struct resources csiphy_res_845[] = {
static const struct resources csid_res_845[] = {
/* CSID0 */
{
- .regulator = { "vdda-csi0" },
+ .regulator = { NULL },
.clock = { "cpas_ahb", "cphy_rx_src", "slow_ahb_src",
"soc_ahb", "vfe0", "vfe0_src",
"vfe0_cphy_rx", "csi0",
@@ -562,7 +562,7 @@ static const struct resources csid_res_845[] = {
/* CSID1 */
{
- .regulator = { "vdda-csi1" },
+ .regulator = { NULL },
.clock = { "cpas_ahb", "cphy_rx_src", "slow_ahb_src",
"soc_ahb", "vfe1", "vfe1_src",
"vfe1_cphy_rx", "csi1",
@@ -582,7 +582,7 @@ static const struct resources csid_res_845[] = {
/* CSID2 */
{
- .regulator = { "vdda-csi2" },
+ .regulator = { NULL },
.clock = { "cpas_ahb", "cphy_rx_src", "slow_ahb_src",
"soc_ahb", "vfe_lite", "vfe_lite_src",
"vfe_lite_cphy_rx", "csi2",
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 12/19] media: camss: fix VFE irq name
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (10 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 11/19] media: camss: remove vdda-csiN from sdm845 resources Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 13/19] media: camss: vfe-170: fix "VFE halt timeout" error Bryan O'Donoghue
` (6 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
vfe->id isn't set yet, so use "id" instead here.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-vfe.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 71f78b40e7f5..165b404761db 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -1293,7 +1293,6 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
case CAMSS_660:
vfe->ops = &vfe_ops_4_8;
break;
-
case CAMSS_845:
vfe->ops = &vfe_ops_170;
break;
@@ -1321,7 +1320,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
vfe->irq = r->start;
snprintf(vfe->irq_name, sizeof(vfe->irq_name), "%s_%s%d",
- dev_name(dev), MSM_VFE_NAME, vfe->id);
+ dev_name(dev), MSM_VFE_NAME, id);
ret = devm_request_irq(dev, vfe->irq, vfe->ops->isr,
IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
if (ret < 0) {
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 13/19] media: camss: vfe-170: fix "VFE halt timeout" error
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (11 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 12/19] media: camss: fix VFE irq name Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 14/19] media: camss: Add initial support for VFE hardware version Titan 480 Bryan O'Donoghue
` (5 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
This function waits for halt_complete but doesn't do anything to cause
it to complete, and always hits the "VFE halt timeout" error. Just delete
this code for now.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-vfe-170.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index 5c083d70d495..af71dc659bb9 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -402,17 +402,7 @@ static irqreturn_t vfe_isr(int irq, void *dev)
*/
static int vfe_halt(struct vfe_device *vfe)
{
- unsigned long time;
-
- reinit_completion(&vfe->halt_complete);
-
- time = wait_for_completion_timeout(&vfe->halt_complete,
- msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
- if (!time) {
- dev_err(vfe->camss->dev, "VFE halt timeout\n");
- return -EIO;
- }
-
+ /* rely on vfe_disable_output() to stop the VFE */
return 0;
}
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 14/19] media: camss: Add initial support for VFE hardware version Titan 480
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (12 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 13/19] media: camss: vfe-170: fix "VFE halt timeout" error Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 15/19] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW Bryan O'Donoghue
` (4 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Add support for VFE found on SM8250 (Titan 480). This implementation is
based on the titan 170 implementation. It supports the normal and lite VFE,
and only supports the RDI0 capture path.
[bod: Updates hw_version callback]
[bod: Use static inline for macros reusing parameters checkpatch --strict]
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../media/platform/qcom/camss/camss-vfe-480.c | 564 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss-vfe.h | 1 +
3 files changed, 566 insertions(+)
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-480.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 0752c46ea37b..81dd56aff0f2 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -15,6 +15,7 @@ qcom-camss-objs += \
camss-vfe-4-7.o \
camss-vfe-4-8.o \
camss-vfe-170.o \
+ camss-vfe-480.o \
camss-vfe-gen1.o \
camss-vfe.o \
camss-video.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-480.c b/drivers/media/platform/qcom/camss/camss-vfe-480.c
new file mode 100644
index 000000000000..129585110393
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
@@ -0,0 +1,564 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-480.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v480 (SM8250)
+ *
+ * Copyright (C) 2020-2021 Linaro Ltd.
+ * Copyright (C) 2021 Jonathan Marek
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+
+/* VFE 2/3 are lite and have a different register layout */
+#define IS_LITE (vfe->id >= 2 ? 1 : 0)
+
+#define VFE_HW_VERSION (0x00)
+
+#define VFE_GLOBAL_RESET_CMD (IS_LITE ? 0x0c : 0x1c)
+#define GLOBAL_RESET_HW_AND_REG (IS_LITE ? BIT(1) : BIT(0))
+
+#define VFE_REG_UPDATE_CMD (IS_LITE ? 0x20 : 0x34)
+static inline int reg_update_rdi(struct vfe_device *vfe, int n)
+{
+ return IS_LITE ? BIT(n) : BIT(1 + (n));
+}
+
+#define REG_UPDATE_RDI reg_update_rdi
+#define VFE_IRQ_CMD (IS_LITE ? 0x24 : 0x38)
+#define IRQ_CMD_GLOBAL_CLEAR BIT(0)
+
+#define VFE_IRQ_MASK(n) ((IS_LITE ? 0x28 : 0x3c) + (n) * 4)
+#define IRQ_MASK_0_RESET_ACK (IS_LITE ? BIT(17) : BIT(0))
+#define IRQ_MASK_0_BUS_TOP_IRQ (IS_LITE ? BIT(4) : BIT(7))
+#define VFE_IRQ_CLEAR(n) ((IS_LITE ? 0x34 : 0x48) + (n) * 4)
+#define VFE_IRQ_STATUS(n) ((IS_LITE ? 0x40 : 0x54) + (n) * 4)
+
+#define BUS_REG_BASE (IS_LITE ? 0x1a00 : 0xaa00)
+
+#define VFE_BUS_WM_CGC_OVERRIDE (BUS_REG_BASE + 0x08)
+#define WM_CGC_OVERRIDE_ALL (0x3FFFFFF)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL (BUS_REG_BASE + 0xdc)
+
+#define VFE_BUS_IRQ_MASK(n) (BUS_REG_BASE + 0x18 + (n) * 4)
+static inline int bus_irq_mask_0_rdi_rup(struct vfe_device *vfe, int n)
+{
+ return IS_LITE ? BIT(n) : BIT(3 + (n));
+}
+
+#define BUS_IRQ_MASK_0_RDI_RUP bus_irq_mask_0_rdi_rup
+static inline int bus_irq_mask_0_comp_done(struct vfe_device *vfe, int n)
+{
+ return IS_LITE ? BIT(4 + (n)) : BIT(6 + (n));
+}
+
+#define BUS_IRQ_MASK_0_COMP_DONE bus_irq_mask_0_comp_done
+#define VFE_BUS_IRQ_CLEAR(n) (BUS_REG_BASE + 0x20 + (n) * 4)
+#define VFE_BUS_IRQ_STATUS(n) (BUS_REG_BASE + 0x28 + (n) * 4)
+#define VFE_BUS_IRQ_CLEAR_GLOBAL (BUS_REG_BASE + 0x30)
+
+#define VFE_BUS_WM_CFG(n) (BUS_REG_BASE + 0x200 + (n) * 0x100)
+#define WM_CFG_EN (0)
+#define WM_CFG_MODE (16)
+#define MODE_QCOM_PLAIN (0)
+#define MODE_MIPI_RAW (1)
+#define VFE_BUS_WM_IMAGE_ADDR(n) (BUS_REG_BASE + 0x204 + (n) * 0x100)
+#define VFE_BUS_WM_FRAME_INCR(n) (BUS_REG_BASE + 0x208 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_0(n) (BUS_REG_BASE + 0x20c + (n) * 0x100)
+#define WM_IMAGE_CFG_0_DEFAULT_WIDTH (0xFFFF)
+#define VFE_BUS_WM_IMAGE_CFG_1(n) (BUS_REG_BASE + 0x210 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_2(n) (BUS_REG_BASE + 0x214 + (n) * 0x100)
+#define VFE_BUS_WM_PACKER_CFG(n) (BUS_REG_BASE + 0x218 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_ADDR(n) (BUS_REG_BASE + 0x220 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_INCR(n) (BUS_REG_BASE + 0x224 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_CFG(n) (BUS_REG_BASE + 0x228 + (n) * 0x100)
+
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n) (BUS_REG_BASE + 0x230 + (n) * 0x100)
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n) (BUS_REG_BASE + 0x234 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PERIOD(n) (BUS_REG_BASE + 0x238 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PATTERN(n) (BUS_REG_BASE + 0x23c + (n) * 0x100)
+
+#define VFE_BUS_WM_SYSTEM_CACHE_CFG(n) (BUS_REG_BASE + 0x260 + (n) * 0x100)
+#define VFE_BUS_WM_BURST_LIMIT(n) (BUS_REG_BASE + 0x264 + (n) * 0x100)
+
+/* for titan 480, each bus client is hardcoded to a specific path
+ * and each bus client is part of a hardcoded "comp group"
+ */
+#define RDI_WM(n) ((IS_LITE ? 0 : 23) + (n))
+#define RDI_COMP_GROUP(n) ((IS_LITE ? 0 : 11) + (n))
+
+static u32 vfe_hw_version(struct vfe_device *vfe)
+{
+ u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
+
+ u32 gen = (hw_version >> 28) & 0xF;
+ u32 rev = (hw_version >> 16) & 0xFFF;
+ u32 step = hw_version & 0xFFFF;
+
+ dev_dbg(vfe->camss->dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
+
+ return hw_version;
+}
+
+static void vfe_global_reset(struct vfe_device *vfe)
+{
+ writel_relaxed(IRQ_MASK_0_RESET_ACK, vfe->base + VFE_IRQ_MASK(0));
+ writel_relaxed(GLOBAL_RESET_HW_AND_REG, vfe->base + VFE_GLOBAL_RESET_CMD);
+}
+
+static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
+{
+ struct v4l2_pix_format_mplane *pix =
+ &line->video_out.active_fmt.fmt.pix_mp;
+
+ wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
+
+ /* no clock gating at bus input */
+ writel_relaxed(WM_CGC_OVERRIDE_ALL, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
+
+ writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
+
+ writel_relaxed(pix->plane_fmt[0].bytesperline * pix->height,
+ vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+ writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
+ writel_relaxed(WM_IMAGE_CFG_0_DEFAULT_WIDTH,
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
+ writel_relaxed(pix->plane_fmt[0].bytesperline,
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
+ writel_relaxed(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
+
+ /* no dropped frames, one irq per frame */
+ writel_relaxed(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
+ writel_relaxed(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
+ writel_relaxed(0, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(wm));
+ writel_relaxed(1, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(wm));
+
+ writel_relaxed(1 << WM_CFG_EN | MODE_MIPI_RAW << WM_CFG_MODE,
+ vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
+{
+ wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
+ writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
+ struct vfe_line *line)
+{
+ wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
+ writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ vfe->reg_update |= REG_UPDATE_RDI(vfe, line_id);
+ writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+ enum vfe_line_id line_id)
+{
+ vfe->reg_update &= ~REG_UPDATE_RDI(vfe, line_id);
+}
+
+static void vfe_enable_irq_common(struct vfe_device *vfe)
+{
+ /* enable only the IRQs used: rup and comp_done irqs for RDI0 */
+ writel_relaxed(IRQ_MASK_0_RESET_ACK | IRQ_MASK_0_BUS_TOP_IRQ,
+ vfe->base + VFE_IRQ_MASK(0));
+ writel_relaxed(BUS_IRQ_MASK_0_RDI_RUP(vfe, 0) |
+ BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(0)),
+ vfe->base + VFE_BUS_IRQ_MASK(0));
+}
+
+static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id);
+static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm);
+
+/*
+ * vfe_isr - VFE module interrupt handler
+ * @irq: Interrupt line
+ * @dev: VFE device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t vfe_isr(int irq, void *dev)
+{
+ struct vfe_device *vfe = dev;
+ u32 status;
+
+ status = readl_relaxed(vfe->base + VFE_IRQ_STATUS(0));
+ writel_relaxed(status, vfe->base + VFE_IRQ_CLEAR(0));
+ writel_relaxed(IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
+
+ if (status & IRQ_MASK_0_RESET_ACK)
+ vfe_isr_reset_ack(vfe);
+
+ if (status & IRQ_MASK_0_BUS_TOP_IRQ) {
+ u32 status = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(0));
+
+ writel_relaxed(status, vfe->base + VFE_BUS_IRQ_CLEAR(0));
+ writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
+
+ if (status & BUS_IRQ_MASK_0_RDI_RUP(vfe, 0))
+ vfe_isr_reg_update(vfe, 0);
+
+ if (status & BUS_IRQ_MASK_0_COMP_DONE(vfe, RDI_COMP_GROUP(0)))
+ vfe_isr_wm_done(vfe, 0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * vfe_halt - Trigger halt on VFE module and wait to complete
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_halt(struct vfe_device *vfe)
+{
+ /* rely on vfe_disable_output() to stop the VFE */
+ return 0;
+}
+
+static int vfe_get_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output;
+ unsigned long flags;
+ int wm_idx;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ output = &line->output;
+ if (output->state != VFE_OUTPUT_OFF) {
+ dev_err(vfe->camss->dev, "Output is running\n");
+ goto error;
+ }
+
+ output->wm_num = 1;
+
+ wm_idx = vfe_reserve_wm(vfe, line->id);
+ if (wm_idx < 0) {
+ dev_err(vfe->camss->dev, "Can not reserve wm\n");
+ goto error_get_wm;
+ }
+ output->wm_idx[0] = wm_idx;
+
+ output->drop_update_idx = 0;
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+
+error_get_wm:
+ vfe_release_wm(vfe, output->wm_idx[0]);
+ output->state = VFE_OUTPUT_OFF;
+error:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return -EINVAL;
+}
+
+static int vfe_enable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ unsigned long flags;
+ unsigned int i;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ vfe_reg_update_clear(vfe, line->id);
+
+ if (output->state != VFE_OUTPUT_OFF) {
+ dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
+ output->state);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ return -EINVAL;
+ }
+
+ WARN_ON(output->gen2.active_num);
+
+ output->state = VFE_OUTPUT_ON;
+
+ output->sequence = 0;
+ output->wait_reg_update = 0;
+ reinit_completion(&output->reg_update);
+
+ vfe_wm_start(vfe, output->wm_idx[0], line);
+
+ for (i = 0; i < 2; i++) {
+ output->buf[i] = vfe_buf_get_pending(output);
+ if (!output->buf[i])
+ break;
+ output->gen2.active_num++;
+ vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
+ }
+
+ vfe_reg_update(vfe, line->id);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+static int vfe_disable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ unsigned long flags;
+ unsigned int i;
+ bool done;
+ int timeout = 0;
+
+ do {
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ done = !output->gen2.active_num;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ usleep_range(10000, 20000);
+
+ if (timeout++ == 100) {
+ dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
+ vfe_reset(vfe);
+ output->gen2.active_num = 0;
+ return 0;
+ }
+ } while (!done);
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ for (i = 0; i < output->wm_num; i++)
+ vfe_wm_stop(vfe, output->wm_idx[i]);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+/*
+ * vfe_enable - Enable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_enable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ int ret;
+
+ mutex_lock(&vfe->stream_lock);
+
+ if (!vfe->stream_count)
+ vfe_enable_irq_common(vfe);
+
+ vfe->stream_count++;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ ret = vfe_get_output(line);
+ if (ret < 0)
+ goto error_get_output;
+
+ ret = vfe_enable_output(line);
+ if (ret < 0)
+ goto error_enable_output;
+
+ vfe->was_streaming = 1;
+
+ return 0;
+
+error_enable_output:
+ vfe_put_output(line);
+
+error_get_output:
+ mutex_lock(&vfe->stream_lock);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return ret;
+}
+
+/*
+ * vfe_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_disable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+
+ vfe_disable_output(line);
+
+ vfe_put_output(line);
+
+ mutex_lock(&vfe->stream_lock);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return 0;
+}
+
+/*
+ * vfe_isr_reg_update - Process reg update interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ struct vfe_output *output;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ vfe_reg_update_clear(vfe, line_id);
+
+ output = &vfe->line[line_id].output;
+
+ if (output->wait_reg_update) {
+ output->wait_reg_update = 0;
+ complete(&output->reg_update);
+ }
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_wm_done - Process write master done interrupt
+ * @vfe: VFE Device
+ * @wm: Write master id
+ */
+static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
+{
+ struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
+ struct camss_buffer *ready_buf;
+ struct vfe_output *output;
+ unsigned long flags;
+ u32 index;
+ u64 ts = ktime_get_ns();
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
+ dev_err_ratelimited(vfe->camss->dev,
+ "Received wm done for unmapped index\n");
+ goto out_unlock;
+ }
+ output = &vfe->line[vfe->wm_output_map[wm]].output;
+
+ ready_buf = output->buf[0];
+ if (!ready_buf) {
+ dev_err_ratelimited(vfe->camss->dev,
+ "Missing ready buf %d!\n", output->state);
+ goto out_unlock;
+ }
+
+ ready_buf->vb.vb2_buf.timestamp = ts;
+ ready_buf->vb.sequence = output->sequence++;
+
+ index = 0;
+ output->buf[0] = output->buf[1];
+ if (output->buf[0])
+ index = 1;
+
+ output->buf[index] = vfe_buf_get_pending(output);
+
+ if (output->buf[index])
+ vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
+ else
+ output->gen2.active_num--;
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_pm_domain_off - Disable power domains specific to this VFE.
+ * @vfe: VFE Device
+ */
+static void vfe_pm_domain_off(struct vfe_device *vfe)
+{
+ /* nop */
+}
+
+/*
+ * vfe_pm_domain_on - Enable power domains specific to this VFE.
+ * @vfe: VFE Device
+ */
+static int vfe_pm_domain_on(struct vfe_device *vfe)
+{
+ return 0;
+}
+
+/*
+ * vfe_queue_buffer - Add empty buffer
+ * @vid: Video device structure
+ * @buf: Buffer to be enqueued
+ *
+ * Add an empty buffer - depending on the current number of buffers it will be
+ * put in pending buffer queue or directly given to the hardware to be filled.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_queue_buffer(struct camss_video *vid,
+ struct camss_buffer *buf)
+{
+ struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output;
+ unsigned long flags;
+
+ output = &line->output;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
+ output->buf[output->gen2.active_num++] = buf;
+ vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
+ } else {
+ vfe_buf_add_pending(output, buf);
+ }
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+static const struct camss_video_ops vfe_video_ops_480 = {
+ .queue_buffer = vfe_queue_buffer,
+ .flush_buffers = vfe_flush_buffers,
+};
+
+static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
+{
+ vfe->video_ops = vfe_video_ops_480;
+ vfe->line_num = 1;
+}
+
+const struct vfe_hw_ops vfe_ops_480 = {
+ .global_reset = vfe_global_reset,
+ .hw_version = vfe_hw_version,
+ .isr = vfe_isr,
+ .pm_domain_off = vfe_pm_domain_off,
+ .pm_domain_on = vfe_pm_domain_on,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_disable,
+ .vfe_enable = vfe_enable,
+ .vfe_halt = vfe_halt,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index f166d176cb77..6500474a749e 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -201,5 +201,6 @@ extern const struct vfe_hw_ops vfe_ops_4_1;
extern const struct vfe_hw_ops vfe_ops_4_7;
extern const struct vfe_hw_ops vfe_ops_4_8;
extern const struct vfe_hw_ops vfe_ops_170;
+extern const struct vfe_hw_ops vfe_ops_480;
#endif /* QC_MSM_CAMSS_VFE_H */
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 15/19] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (13 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 14/19] media: camss: Add initial support for VFE hardware version Titan 480 Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 16/19] media: camss: add support for SM8250 camss Bryan O'Donoghue
` (3 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
Add this common format to the various format lists relevant to sdm845.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid-170.c | 7 +++++++
drivers/media/platform/qcom/camss/camss-csiphy.c | 1 +
drivers/media/platform/qcom/camss/camss-vfe.c | 1 +
drivers/media/platform/qcom/camss/camss-video.c | 2 ++
4 files changed, 11 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index 22a7d7ad6340..9e54d251793f 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -262,6 +262,13 @@ static const struct csid_format csid_formats[] = {
10,
1,
},
+ {
+ MEDIA_BUS_FMT_Y8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
{
MEDIA_BUS_FMT_Y10_1X10,
DATA_TYPE_RAW_10BIT,
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 24eec16197e7..de1e81bb97c9 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -94,6 +94,7 @@ static const struct csiphy_format csiphy_formats_sdm845[] = {
{ MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
{ MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
{ MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
+ { MEDIA_BUS_FMT_Y8_1X8, 8 },
{ MEDIA_BUS_FMT_Y10_1X10, 10 },
};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 165b404761db..3d2f554a4ef7 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -118,6 +118,7 @@ static const struct vfe_format formats_rdi_845[] = {
{ MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
{ MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
{ MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
+ { MEDIA_BUS_FMT_Y8_1X8, 8 },
{ MEDIA_BUS_FMT_Y10_1X10, 10 },
{ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
};
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index f282275af626..54e77d30d452 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -176,6 +176,8 @@ static const struct camss_format_info formats_rdi_845[] = {
{ { 1, 1 } }, { { 1, 1 } }, { 14 } },
{ MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
{ { 1, 1 } }, { { 1, 1 } }, { 14 } },
+ { MEDIA_BUS_FMT_Y8_1X8, V4L2_PIX_FMT_GREY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
{ MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
{ { 1, 1 } }, { { 1, 1 } }, { 10 } },
{ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 16/19] media: camss: add support for SM8250 camss
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (14 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 15/19] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 17/19] media: camss: Add SM8250 bandwdith configuration support Bryan O'Donoghue
` (2 subsequent siblings)
18 siblings, 0 replies; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
From: Jonathan Marek <jonathan@marek.ca>
The Titan 480 camss found on SM8250 has 6 CSIPHY and 4 VFE/CSID.
CSID is compatible with the Titan 170 CSID, but the Titan 480 CSID are
inside the VFE region (between the "top" and "bus" registers), so a
workaround is added to avoid ioremap failure.
[bod] Fixed setting camnoc_axi_clk_src instead of camcc_camnoc_axi_clk
[jgrahsl, bod] Add slow_ahb_src clock values
[jgrahsl, bod] Add cpa_ahb clock values
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/Makefile | 2 +-
.../{camss-csid-170.c => camss-csid-gen2.c} | 2 +-
.../media/platform/qcom/camss/camss-csid.c | 26 ++-
.../media/platform/qcom/camss/camss-csid.h | 2 +-
.../media/platform/qcom/camss/camss-csiphy.c | 8 +-
drivers/media/platform/qcom/camss/camss-vfe.c | 9 +-
.../media/platform/qcom/camss/camss-video.c | 3 +-
drivers/media/platform/qcom/camss/camss.c | 219 +++++++++++++++++-
8 files changed, 246 insertions(+), 25 deletions(-)
rename drivers/media/platform/qcom/camss/{camss-csid-170.c => camss-csid-gen2.c} (99%)
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 81dd56aff0f2..4e2222358973 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -6,7 +6,7 @@ qcom-camss-objs += \
camss-csid.o \
camss-csid-4-1.o \
camss-csid-4-7.o \
- camss-csid-170.o \
+ camss-csid-gen2.o \
camss-csiphy-2ph-1-0.o \
camss-csiphy-3ph-1-0.o \
camss-csiphy.o \
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
similarity index 99%
rename from drivers/media/platform/qcom/camss/camss-csid-170.c
rename to drivers/media/platform/qcom/camss/camss-csid-gen2.c
index 9e54d251793f..abbfbf448893 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen2.c
@@ -594,7 +594,7 @@ static void csid_subdev_init(struct csid_device *csid)
csid->testgen.nmodes = CSID_PAYLOAD_MODE_NUM_SUPPORTED_GEN2;
}
-const struct csid_hw_ops csid_ops_170 = {
+const struct csid_hw_ops csid_ops_gen2 = {
.configure_stream = csid_configure_stream,
.configure_testgen_pattern = csid_configure_testgen_pattern,
.hw_version = csid_hw_version,
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index 1226913c623b..9ef6fbbeeddf 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -25,6 +25,10 @@
#include "camss-csid-gen1.h"
#include "camss.h"
+/* offset of CSID registers in VFE region for VFE 480 */
+#define VFE_480_CSID_OFFSET 0x1200
+#define VFE_480_LITE_CSID_OFFSET 0x200
+
#define MSM_CSID_NAME "msm_csid"
const char * const csid_testgen_modes[] = {
@@ -559,8 +563,9 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
} else if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660) {
csid->ops = &csid_ops_4_7;
- } else if (camss->version == CAMSS_845) {
- csid->ops = &csid_ops_170;
+ } else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250) {
+ csid->ops = &csid_ops_gen2;
} else {
return -EINVAL;
}
@@ -568,9 +573,20 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
/* Memory */
- csid->base = devm_platform_ioremap_resource_byname(pdev, res->reg[0]);
- if (IS_ERR(csid->base))
- return PTR_ERR(csid->base);
+ if (camss->version == CAMSS_8250) {
+ /* for titan 480, CSID registers are inside the VFE region,
+ * between the VFE "top" and "bus" registers. this requires
+ * VFE to be initialized before CSID
+ */
+ if (id >= 2) /* VFE/CSID lite */
+ csid->base = camss->vfe[id].base + VFE_480_LITE_CSID_OFFSET;
+ else
+ csid->base = camss->vfe[id].base + VFE_480_CSID_OFFSET;
+ } else {
+ csid->base = devm_platform_ioremap_resource_byname(pdev, res->reg[0]);
+ if (IS_ERR(csid->base))
+ return PTR_ERR(csid->base);
+ }
/* Interrupt */
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index 814ebc7c29d6..17a50fa426be 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -205,7 +205,7 @@ extern const char * const csid_testgen_modes[];
extern const struct csid_hw_ops csid_ops_4_1;
extern const struct csid_hw_ops csid_ops_4_7;
-extern const struct csid_hw_ops csid_ops_170;
+extern const struct csid_hw_ops csid_ops_gen2;
#endif /* QC_MSM_CAMSS_CSID_H */
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index de1e81bb97c9..f1d8d883af8e 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -586,7 +586,8 @@ int msm_csiphy_subdev_init(struct camss *camss,
csiphy->ops = &csiphy_ops_3ph_1_0;
csiphy->formats = csiphy_formats_8x96;
csiphy->nformats = ARRAY_SIZE(csiphy_formats_8x96);
- } else if (camss->version == CAMSS_845) {
+ } else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250) {
csiphy->ops = &csiphy_ops_3ph_1_0;
csiphy->formats = csiphy_formats_sdm845;
csiphy->nformats = ARRAY_SIZE(csiphy_formats_sdm845);
@@ -680,7 +681,10 @@ int msm_csiphy_subdev_init(struct camss *camss,
if (!strcmp(clock->name, "csiphy0_timer") ||
!strcmp(clock->name, "csiphy1_timer") ||
- !strcmp(clock->name, "csiphy2_timer"))
+ !strcmp(clock->name, "csiphy2_timer") ||
+ !strcmp(clock->name, "csiphy3_timer") ||
+ !strcmp(clock->name, "csiphy4_timer") ||
+ !strcmp(clock->name, "csiphy5_timer"))
csiphy->rate_set[i] = true;
if (camss->version == CAMSS_660 &&
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 3d2f554a4ef7..5b5fe620914d 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -220,7 +220,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
}
else if (vfe->camss->version == CAMSS_8x96 ||
vfe->camss->version == CAMSS_660 ||
- vfe->camss->version == CAMSS_845)
+ vfe->camss->version == CAMSS_845 ||
+ vfe->camss->version == CAMSS_8250)
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_2X8:
{
@@ -1297,6 +1298,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
case CAMSS_845:
vfe->ops = &vfe_ops_170;
break;
+ case CAMSS_8250:
+ vfe->ops = &vfe_ops_480;
+ break;
default:
return -EINVAL;
}
@@ -1407,7 +1411,8 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
l->formats = formats_rdi_8x96;
l->nformats = ARRAY_SIZE(formats_rdi_8x96);
}
- } else if (camss->version == CAMSS_845) {
+ } else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250) {
l->formats = formats_rdi_845;
l->nformats = ARRAY_SIZE(formats_rdi_845);
} else {
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index 54e77d30d452..5dc1ddbe6d65 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -1011,7 +1011,8 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
video->formats = formats_rdi_8x96;
video->nformats = ARRAY_SIZE(formats_rdi_8x96);
}
- } else if (video->camss->version == CAMSS_845) {
+ } else if (video->camss->version == CAMSS_845 ||
+ video->camss->version == CAMSS_8250) {
video->formats = formats_rdi_845;
video->nformats = ARRAY_SIZE(formats_rdi_845);
} else {
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 71c6109b0526..066639db9f18 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -662,6 +662,185 @@ static const struct resources vfe_res_845[] = {
}
};
+static const struct resources csiphy_res_8250[] = {
+ /* CSIPHY0 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy0", "csiphy0_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" }
+ },
+ /* CSIPHY1 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy1", "csiphy1_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" }
+ },
+ /* CSIPHY2 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy2", "csiphy2_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" }
+ },
+ /* CSIPHY3 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy3", "csiphy3_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" }
+ },
+ /* CSIPHY4 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy4", "csiphy4_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy4" },
+ .interrupt = { "csiphy4" }
+ },
+ /* CSIPHY5 */
+ {
+ .regulator = { NULL },
+ .clock = { "csiphy5", "csiphy5_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy5" },
+ .interrupt = { "csiphy5" }
+ }
+};
+
+static const struct resources csid_res_8250[] = {
+ /* CSID0 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe0_csid", "vfe0_cphy_rx", "vfe0", "vfe0_areg", "vfe0_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 0 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" }
+ },
+ /* CSID1 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe1_csid", "vfe1_cphy_rx", "vfe1", "vfe1_areg", "vfe1_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 0 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" }
+ },
+ /* CSID2 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx", "vfe_lite", "vfe_lite_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" }
+ },
+ /* CSID3 */
+ {
+ .regulator = { NULL },
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx", "vfe_lite", "vfe_lite_ahb" },
+ .clock_rate = { { 400000000 },
+ { 400000000 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "csid3" },
+ .interrupt = { "csid3" }
+ }
+};
+
+static const struct resources vfe_res_8250[] = {
+ /* VFE0 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi_src", "slow_ahb_src", "cpas_ahb",
+ "camnoc_axi", "vfe0_ahb", "vfe0_areg", "vfe0",
+ "vfe0_axi", "cam_hf_axi" },
+ .clock_rate = { { 19200000, 300000000, 400000000, 480000000 },
+ { 19200000, 80000000 },
+ { 19200000 },
+ { 0 },
+ { 0 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" }
+ },
+ /* VFE1 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi_src", "slow_ahb_src", "cpas_ahb",
+ "camnoc_axi", "vfe1_ahb", "vfe1_areg", "vfe1",
+ "vfe1_axi", "cam_hf_axi" },
+ .clock_rate = { { 19200000, 300000000, 400000000, 480000000 },
+ { 19200000, 80000000 },
+ { 19200000 },
+ { 0 },
+ { 0 },
+ { 100000000, 200000000, 300000000, 400000000 },
+ { 350000000, 475000000, 576000000, 720000000 },
+ { 0 },
+ { 0 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" }
+ },
+ /* VFE2 (lite) */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi_src", "slow_ahb_src", "cpas_ahb",
+ "camnoc_axi", "vfe_lite_ahb", "vfe_lite_axi",
+ "vfe_lite", "cam_hf_axi" },
+ .clock_rate = { { 19200000, 300000000, 400000000, 480000000 },
+ { 19200000, 80000000 },
+ { 19200000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" }
+ },
+ /* VFE3 (lite) */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi_src", "slow_ahb_src", "cpas_ahb",
+ "camnoc_axi", "vfe_lite_ahb", "vfe_lite_axi",
+ "vfe_lite", "cam_hf_axi" },
+ .clock_rate = { { 19200000, 300000000, 400000000, 480000000 },
+ { 19200000, 80000000 },
+ { 19200000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 400000000, 480000000 },
+ { 0 } },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" }
+ },
+};
+
/*
* camss_add_clock_margin - Add margin to clock frequency rate
* @rate: Clock frequency rate
@@ -945,6 +1124,12 @@ static int camss_init_subdevices(struct camss *camss)
/* Titan VFEs don't have an ISPIF */
ispif_res = NULL;
vfe_res = vfe_res_845;
+ } else if (camss->version == CAMSS_8250) {
+ csiphy_res = csiphy_res_8250;
+ csid_res = csid_res_8250;
+ /* Titan VFEs don't have an ISPIF */
+ ispif_res = NULL;
+ vfe_res = vfe_res_8250;
} else {
return -EINVAL;
}
@@ -960,6 +1145,17 @@ static int camss_init_subdevices(struct camss *camss)
}
}
+ /* note: SM8250 requires VFE to be initialized before CSID */
+ for (i = 0; i < camss->vfe_num; i++) {
+ ret = msm_vfe_subdev_init(camss, &camss->vfe[i],
+ &vfe_res[i], i);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Fail to init vfe%d sub-device: %d\n", i, ret);
+ return ret;
+ }
+ }
+
for (i = 0; i < camss->csid_num; i++) {
ret = msm_csid_subdev_init(camss, &camss->csid[i],
&csid_res[i], i);
@@ -978,16 +1174,6 @@ static int camss_init_subdevices(struct camss *camss)
return ret;
}
- for (i = 0; i < camss->vfe_num; i++) {
- ret = msm_vfe_subdev_init(camss, &camss->vfe[i],
- &vfe_res[i], i);
- if (ret < 0) {
- dev_err(camss->dev,
- "Fail to init vfe%d sub-device: %d\n", i, ret);
- return ret;
- }
- }
-
return 0;
}
@@ -1250,7 +1436,8 @@ static int camss_configure_pd(struct camss *camss)
if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660)
nbr_pm_domains = PM_DOMAIN_GEN1_COUNT;
- else if (camss->version == CAMSS_845)
+ else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250)
nbr_pm_domains = PM_DOMAIN_GEN2_COUNT;
for (i = 0; i < nbr_pm_domains; i++) {
@@ -1326,6 +1513,12 @@ static int camss_probe(struct platform_device *pdev)
camss->csiphy_num = 4;
camss->csid_num = 3;
camss->vfe_num = 3;
+ } else if (of_device_is_compatible(dev->of_node,
+ "qcom,sm8250-camss")) {
+ camss->version = CAMSS_8250;
+ camss->csiphy_num = 6;
+ camss->csid_num = 4;
+ camss->vfe_num = 4;
} else {
ret = -EINVAL;
goto err_free;
@@ -1457,7 +1650,8 @@ void camss_delete(struct camss *camss)
if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660)
nbr_pm_domains = PM_DOMAIN_GEN1_COUNT;
- else if (camss->version == CAMSS_845)
+ else if (camss->version == CAMSS_845 ||
+ camss->version == CAMSS_8250)
nbr_pm_domains = PM_DOMAIN_GEN2_COUNT;
for (i = 0; i < nbr_pm_domains; i++) {
@@ -1493,6 +1687,7 @@ static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,msm8996-camss" },
{ .compatible = "qcom,sdm660-camss" },
{ .compatible = "qcom,sdm845-camss" },
+ { .compatible = "qcom,sm8250-camss" },
{ }
};
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v2 17/19] media: camss: Add SM8250 bandwdith configuration support
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (15 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 16/19] media: camss: add support for SM8250 camss Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-25 10:27 ` Robert Foss
2021-11-24 17:59 ` [PATCH v2 18/19] media: camss: Do vfe_get/vfe_put for csid on sm8250 Bryan O'Donoghue
2021-11-24 17:59 ` [PATCH v2 19/19] media: camss: Apply vfe_get/vfe_put fix to SDM845 Bryan O'Donoghue
18 siblings, 1 reply; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
Downstream makes some pretty explicit comments about voting for bus
bandwidth prior to camcc_camnoc_axi_clk_src. Working with camx downstream
also shows that the bandwidth vote is required to get that root clock
working.
Add a simple mechanism to declare set and unset named NOCs. Whereas the
objective is to enable the sm8250 specifically the code has been
implemented to allow setting of whatever NOCs different SoCs using this
driver may require.
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss.c | 81 +++++++++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 17 +++++
2 files changed, 98 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 066639db9f18..d9905e737d88 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -8,6 +8,7 @@
* Copyright (C) 2015-2018 Linaro Ltd.
*/
#include <linux/clk.h>
+#include <linux/interconnect.h>
#include <linux/media-bus-format.h>
#include <linux/media.h>
#include <linux/module.h>
@@ -841,6 +842,29 @@ static const struct resources vfe_res_8250[] = {
},
};
+static const struct resources_icc icc_res_sm8250[] = {
+ {
+ .name = "cam_ahb",
+ .icc_bw_tbl.avg = 38400,
+ .icc_bw_tbl.peak = 76800,
+ },
+ {
+ .name = "cam_hf_0_mnoc",
+ .icc_bw_tbl.avg = 2097152,
+ .icc_bw_tbl.peak = 2097152,
+ },
+ {
+ .name = "cam_sf_0_mnoc",
+ .icc_bw_tbl.avg = 0,
+ .icc_bw_tbl.peak = 2097152,
+ },
+ {
+ .name = "cam_sf_icp_mnoc",
+ .icc_bw_tbl.avg = 2097152,
+ .icc_bw_tbl.peak = 2097152,
+ },
+};
+
/*
* camss_add_clock_margin - Add margin to clock frequency rate
* @rate: Clock frequency rate
@@ -1470,6 +1494,29 @@ static int camss_configure_pd(struct camss *camss)
return ret;
}
+static int camss_icc_get(struct camss *camss)
+{
+ const struct resources_icc *icc_res;
+ int nbr_icc_paths = 0;
+ int i;
+
+ if (camss->version == CAMSS_8250) {
+ icc_res = &icc_res_sm8250[0];
+ nbr_icc_paths = ICC_SM8250_COUNT;
+ }
+
+ for (i = 0; i < nbr_icc_paths; i++) {
+ camss->icc_path[i] = devm_of_icc_get(camss->dev,
+ icc_res[i].name);
+ if (IS_ERR(camss->icc_path[i]))
+ return PTR_ERR(camss->icc_path[i]);
+
+ camss->icc_bw_tbl[i] = icc_res[i].icc_bw_tbl;
+ }
+
+ return 0;
+}
+
/*
* camss_probe - Probe CAMSS platform device
* @pdev: Pointer to CAMSS platform device
@@ -1562,6 +1609,10 @@ static int camss_probe(struct platform_device *pdev)
goto err_cleanup;
}
+ ret = camss_icc_get(camss);
+ if (ret < 0)
+ goto err_cleanup;
+
ret = camss_init_subdevices(camss);
if (ret < 0)
goto err_cleanup;
@@ -1695,11 +1746,41 @@ MODULE_DEVICE_TABLE(of, camss_dt_match);
static int __maybe_unused camss_runtime_suspend(struct device *dev)
{
+ struct camss *camss = dev_get_drvdata(dev);
+ int nbr_icc_paths = 0;
+ int i;
+ int ret;
+
+ if (camss->version == CAMSS_8250)
+ nbr_icc_paths = ICC_SM8250_COUNT;
+
+ for (i = 0; i < nbr_icc_paths; i++) {
+ ret = icc_set_bw(camss->icc_path[i], 0, 0);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
static int __maybe_unused camss_runtime_resume(struct device *dev)
{
+ struct camss *camss = dev_get_drvdata(dev);
+ int nbr_icc_paths = 0;
+ int i;
+ int ret;
+
+ if (camss->version == CAMSS_8250)
+ nbr_icc_paths = ICC_SM8250_COUNT;
+
+ for (i = 0; i < nbr_icc_paths; i++) {
+ ret = icc_set_bw(camss->icc_path[i],
+ camss->icc_bw_tbl[i].avg,
+ camss->icc_bw_tbl[i].peak);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 377e2474a485..9c644e638a94 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -56,6 +56,16 @@ struct resources_ispif {
char *interrupt;
};
+struct icc_bw_tbl {
+ u32 avg;
+ u32 peak;
+};
+
+struct resources_icc {
+ char *name;
+ struct icc_bw_tbl icc_bw_tbl;
+};
+
enum pm_domain {
PM_DOMAIN_VFE0 = 0,
PM_DOMAIN_VFE1 = 1,
@@ -72,6 +82,11 @@ enum camss_version {
CAMSS_8250,
};
+enum icc_count {
+ ICC_DEFAULT_COUNT = 0,
+ ICC_SM8250_COUNT = 4,
+};
+
struct camss {
enum camss_version version;
struct v4l2_device v4l2_dev;
@@ -88,6 +103,8 @@ struct camss {
atomic_t ref_count;
struct device *genpd[PM_DOMAIN_GEN2_COUNT];
struct device_link *genpd_link[PM_DOMAIN_GEN2_COUNT];
+ struct icc_path *icc_path[ICC_SM8250_COUNT];
+ struct icc_bw_tbl icc_bw_tbl[ICC_SM8250_COUNT];
};
struct camss_camera_interface {
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* Re: [PATCH v2 17/19] media: camss: Add SM8250 bandwdith configuration support
2021-11-24 17:59 ` [PATCH v2 17/19] media: camss: Add SM8250 bandwdith configuration support Bryan O'Donoghue
@ 2021-11-25 10:27 ` Robert Foss
0 siblings, 0 replies; 25+ messages in thread
From: Robert Foss @ 2021-11-25 10:27 UTC (permalink / raw)
To: Bryan O'Donoghue
Cc: linux-arm-msm, linux-media, jonathan, andrey.konovalov,
todor.too, agross, bjorn.andersson, mchehab, jgrahsl, hfink
On Wed, 24 Nov 2021 at 18:57, Bryan O'Donoghue
<bryan.odonoghue@linaro.org> wrote:
>
> Downstream makes some pretty explicit comments about voting for bus
> bandwidth prior to camcc_camnoc_axi_clk_src. Working with camx downstream
> also shows that the bandwidth vote is required to get that root clock
> working.
>
> Add a simple mechanism to declare set and unset named NOCs. Whereas the
> objective is to enable the sm8250 specifically the code has been
> implemented to allow setting of whatever NOCs different SoCs using this
> driver may require.
>
> Tested-by: Julian Grahsl <jgrahsl@snap.com>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> drivers/media/platform/qcom/camss/camss.c | 81 +++++++++++++++++++++++
> drivers/media/platform/qcom/camss/camss.h | 17 +++++
> 2 files changed, 98 insertions(+)
>
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index 066639db9f18..d9905e737d88 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -8,6 +8,7 @@
> * Copyright (C) 2015-2018 Linaro Ltd.
> */
> #include <linux/clk.h>
> +#include <linux/interconnect.h>
> #include <linux/media-bus-format.h>
> #include <linux/media.h>
> #include <linux/module.h>
> @@ -841,6 +842,29 @@ static const struct resources vfe_res_8250[] = {
> },
> };
>
> +static const struct resources_icc icc_res_sm8250[] = {
> + {
> + .name = "cam_ahb",
> + .icc_bw_tbl.avg = 38400,
> + .icc_bw_tbl.peak = 76800,
> + },
> + {
> + .name = "cam_hf_0_mnoc",
> + .icc_bw_tbl.avg = 2097152,
> + .icc_bw_tbl.peak = 2097152,
> + },
> + {
> + .name = "cam_sf_0_mnoc",
> + .icc_bw_tbl.avg = 0,
> + .icc_bw_tbl.peak = 2097152,
> + },
> + {
> + .name = "cam_sf_icp_mnoc",
> + .icc_bw_tbl.avg = 2097152,
> + .icc_bw_tbl.peak = 2097152,
> + },
> +};
> +
> /*
> * camss_add_clock_margin - Add margin to clock frequency rate
> * @rate: Clock frequency rate
> @@ -1470,6 +1494,29 @@ static int camss_configure_pd(struct camss *camss)
> return ret;
> }
>
> +static int camss_icc_get(struct camss *camss)
> +{
> + const struct resources_icc *icc_res;
> + int nbr_icc_paths = 0;
> + int i;
> +
> + if (camss->version == CAMSS_8250) {
> + icc_res = &icc_res_sm8250[0];
> + nbr_icc_paths = ICC_SM8250_COUNT;
> + }
> +
> + for (i = 0; i < nbr_icc_paths; i++) {
> + camss->icc_path[i] = devm_of_icc_get(camss->dev,
> + icc_res[i].name);
> + if (IS_ERR(camss->icc_path[i]))
> + return PTR_ERR(camss->icc_path[i]);
> +
> + camss->icc_bw_tbl[i] = icc_res[i].icc_bw_tbl;
> + }
> +
> + return 0;
> +}
> +
> /*
> * camss_probe - Probe CAMSS platform device
> * @pdev: Pointer to CAMSS platform device
> @@ -1562,6 +1609,10 @@ static int camss_probe(struct platform_device *pdev)
> goto err_cleanup;
> }
>
> + ret = camss_icc_get(camss);
> + if (ret < 0)
> + goto err_cleanup;
> +
> ret = camss_init_subdevices(camss);
> if (ret < 0)
> goto err_cleanup;
> @@ -1695,11 +1746,41 @@ MODULE_DEVICE_TABLE(of, camss_dt_match);
>
> static int __maybe_unused camss_runtime_suspend(struct device *dev)
> {
> + struct camss *camss = dev_get_drvdata(dev);
> + int nbr_icc_paths = 0;
> + int i;
> + int ret;
> +
> + if (camss->version == CAMSS_8250)
> + nbr_icc_paths = ICC_SM8250_COUNT;
> +
> + for (i = 0; i < nbr_icc_paths; i++) {
> + ret = icc_set_bw(camss->icc_path[i], 0, 0);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
>
> static int __maybe_unused camss_runtime_resume(struct device *dev)
> {
> + struct camss *camss = dev_get_drvdata(dev);
> + int nbr_icc_paths = 0;
> + int i;
> + int ret;
> +
> + if (camss->version == CAMSS_8250)
> + nbr_icc_paths = ICC_SM8250_COUNT;
> +
> + for (i = 0; i < nbr_icc_paths; i++) {
> + ret = icc_set_bw(camss->icc_path[i],
> + camss->icc_bw_tbl[i].avg,
> + camss->icc_bw_tbl[i].peak);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
>
> diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
> index 377e2474a485..9c644e638a94 100644
> --- a/drivers/media/platform/qcom/camss/camss.h
> +++ b/drivers/media/platform/qcom/camss/camss.h
> @@ -56,6 +56,16 @@ struct resources_ispif {
> char *interrupt;
> };
>
> +struct icc_bw_tbl {
> + u32 avg;
> + u32 peak;
> +};
> +
> +struct resources_icc {
> + char *name;
> + struct icc_bw_tbl icc_bw_tbl;
> +};
> +
> enum pm_domain {
> PM_DOMAIN_VFE0 = 0,
> PM_DOMAIN_VFE1 = 1,
> @@ -72,6 +82,11 @@ enum camss_version {
> CAMSS_8250,
> };
>
> +enum icc_count {
> + ICC_DEFAULT_COUNT = 0,
> + ICC_SM8250_COUNT = 4,
> +};
> +
> struct camss {
> enum camss_version version;
> struct v4l2_device v4l2_dev;
> @@ -88,6 +103,8 @@ struct camss {
> atomic_t ref_count;
> struct device *genpd[PM_DOMAIN_GEN2_COUNT];
> struct device_link *genpd_link[PM_DOMAIN_GEN2_COUNT];
> + struct icc_path *icc_path[ICC_SM8250_COUNT];
> + struct icc_bw_tbl icc_bw_tbl[ICC_SM8250_COUNT];
> };
>
> struct camss_camera_interface {
> --
> 2.33.0
>
Looks good!
Reviewed-by: Robert Foss <robert.foss@linaro.org>
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v2 18/19] media: camss: Do vfe_get/vfe_put for csid on sm8250
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (16 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 17/19] media: camss: Add SM8250 bandwdith configuration support Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-25 10:43 ` Robert Foss
2021-11-24 17:59 ` [PATCH v2 19/19] media: camss: Apply vfe_get/vfe_put fix to SDM845 Bryan O'Donoghue
18 siblings, 1 reply; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on
and clocked prior to taking the CSID out of reset.
It is possible to open just the CSID subdev from libcamera and attempt to
bring the CSID block up.
If we do not first bring up the VFE the CSID will fail to come out of
reset.
Tested-by: Julian Grahsl <jgrahsl@snap.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid.c | 12 +++++++++++-
drivers/media/platform/qcom/camss/camss-vfe.c | 4 ++--
drivers/media/platform/qcom/camss/camss-vfe.h | 3 +++
3 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index 9ef6fbbeeddf..e6835b92695b 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -156,10 +156,18 @@ static int csid_set_clock_rates(struct csid_device *csid)
static int csid_set_power(struct v4l2_subdev *sd, int on)
{
struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct device *dev = csid->camss->dev;
+ struct camss *camss = csid->camss;
+ struct device *dev = camss->dev;
+ struct vfe_device *vfe = &camss->vfe[csid->id];
int ret;
if (on) {
+ if (camss->version == CAMSS_8250) {
+ ret = vfe_get(vfe);
+ if (ret < 0)
+ return ret;
+ }
+
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
@@ -204,6 +212,8 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
camss_disable_clocks(csid->nclocks, csid->clock);
ret = csid->vdda ? regulator_disable(csid->vdda) : 0;
pm_runtime_put_sync(dev);
+ if (camss->version == CAMSS_8250)
+ vfe_put(vfe);
}
return ret;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 5b5fe620914d..703ea39f1262 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -575,7 +575,7 @@ static int vfe_check_clock_rates(struct vfe_device *vfe)
*
* Return 0 on success or a negative error code otherwise
*/
-static int vfe_get(struct vfe_device *vfe)
+int vfe_get(struct vfe_device *vfe)
{
int ret;
@@ -637,7 +637,7 @@ static int vfe_get(struct vfe_device *vfe)
* vfe_put - Power down VFE module
* @vfe: VFE Device
*/
-static void vfe_put(struct vfe_device *vfe)
+void vfe_put(struct vfe_device *vfe)
{
mutex_lock(&vfe->power_lock);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 6500474a749e..0eba04eb9b77 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -203,4 +203,7 @@ extern const struct vfe_hw_ops vfe_ops_4_8;
extern const struct vfe_hw_ops vfe_ops_170;
extern const struct vfe_hw_ops vfe_ops_480;
+int vfe_get(struct vfe_device *vfe);
+void vfe_put(struct vfe_device *vfe);
+
#endif /* QC_MSM_CAMSS_VFE_H */
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* Re: [PATCH v2 18/19] media: camss: Do vfe_get/vfe_put for csid on sm8250
2021-11-24 17:59 ` [PATCH v2 18/19] media: camss: Do vfe_get/vfe_put for csid on sm8250 Bryan O'Donoghue
@ 2021-11-25 10:43 ` Robert Foss
0 siblings, 0 replies; 25+ messages in thread
From: Robert Foss @ 2021-11-25 10:43 UTC (permalink / raw)
To: Bryan O'Donoghue
Cc: linux-arm-msm, linux-media, jonathan, andrey.konovalov,
todor.too, agross, bjorn.andersson, mchehab, jgrahsl, hfink
On Wed, 24 Nov 2021 at 18:57, Bryan O'Donoghue
<bryan.odonoghue@linaro.org> wrote:
>
> The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on
> and clocked prior to taking the CSID out of reset.
>
> It is possible to open just the CSID subdev from libcamera and attempt to
> bring the CSID block up.
>
> If we do not first bring up the VFE the CSID will fail to come out of
> reset.
>
> Tested-by: Julian Grahsl <jgrahsl@snap.com>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> drivers/media/platform/qcom/camss/camss-csid.c | 12 +++++++++++-
> drivers/media/platform/qcom/camss/camss-vfe.c | 4 ++--
> drivers/media/platform/qcom/camss/camss-vfe.h | 3 +++
> 3 files changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
> index 9ef6fbbeeddf..e6835b92695b 100644
> --- a/drivers/media/platform/qcom/camss/camss-csid.c
> +++ b/drivers/media/platform/qcom/camss/camss-csid.c
> @@ -156,10 +156,18 @@ static int csid_set_clock_rates(struct csid_device *csid)
> static int csid_set_power(struct v4l2_subdev *sd, int on)
> {
> struct csid_device *csid = v4l2_get_subdevdata(sd);
> - struct device *dev = csid->camss->dev;
> + struct camss *camss = csid->camss;
> + struct device *dev = camss->dev;
> + struct vfe_device *vfe = &camss->vfe[csid->id];
> int ret;
>
> if (on) {
> + if (camss->version == CAMSS_8250) {
> + ret = vfe_get(vfe);
> + if (ret < 0)
> + return ret;
> + }
> +
> ret = pm_runtime_resume_and_get(dev);
> if (ret < 0)
> return ret;
> @@ -204,6 +212,8 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
> camss_disable_clocks(csid->nclocks, csid->clock);
> ret = csid->vdda ? regulator_disable(csid->vdda) : 0;
> pm_runtime_put_sync(dev);
> + if (camss->version == CAMSS_8250)
> + vfe_put(vfe);
> }
>
> return ret;
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> index 5b5fe620914d..703ea39f1262 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> @@ -575,7 +575,7 @@ static int vfe_check_clock_rates(struct vfe_device *vfe)
> *
> * Return 0 on success or a negative error code otherwise
> */
> -static int vfe_get(struct vfe_device *vfe)
> +int vfe_get(struct vfe_device *vfe)
> {
> int ret;
>
> @@ -637,7 +637,7 @@ static int vfe_get(struct vfe_device *vfe)
> * vfe_put - Power down VFE module
> * @vfe: VFE Device
> */
> -static void vfe_put(struct vfe_device *vfe)
> +void vfe_put(struct vfe_device *vfe)
> {
> mutex_lock(&vfe->power_lock);
>
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
> index 6500474a749e..0eba04eb9b77 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
> @@ -203,4 +203,7 @@ extern const struct vfe_hw_ops vfe_ops_4_8;
> extern const struct vfe_hw_ops vfe_ops_170;
> extern const struct vfe_hw_ops vfe_ops_480;
>
> +int vfe_get(struct vfe_device *vfe);
> +void vfe_put(struct vfe_device *vfe);
> +
> #endif /* QC_MSM_CAMSS_VFE_H */
> --
> 2.33.0
Looks good to me!
Reviewed-by: Robert Foss <robert.foss@linaro.org>
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v2 19/19] media: camss: Apply vfe_get/vfe_put fix to SDM845
2021-11-24 17:59 [PATCH v2 00/19] CAMSS: Add SM8250 support Bryan O'Donoghue
` (17 preceding siblings ...)
2021-11-24 17:59 ` [PATCH v2 18/19] media: camss: Do vfe_get/vfe_put for csid on sm8250 Bryan O'Donoghue
@ 2021-11-24 17:59 ` Bryan O'Donoghue
2021-11-25 10:45 ` Robert Foss
18 siblings, 1 reply; 25+ messages in thread
From: Bryan O'Donoghue @ 2021-11-24 17:59 UTC (permalink / raw)
To: linux-arm-msm, linux-media, robert.foss, jonathan
Cc: andrey.konovalov, todor.too, agross, bjorn.andersson, mchehab,
jgrahsl, hfink, bryan.odonoghue
Similar to the SM8250 the CSID relies on the VFE to be clocked prior to
taking the CSID out of reset.
Apply the same fixup to SDM845 as SM8250.
Suggested-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
drivers/media/platform/qcom/camss/camss-csid.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index e6835b92695b..32f82e471bae 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -159,10 +159,11 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
struct camss *camss = csid->camss;
struct device *dev = camss->dev;
struct vfe_device *vfe = &camss->vfe[csid->id];
+ u32 version = camss->version;
int ret;
if (on) {
- if (camss->version == CAMSS_8250) {
+ if (version == CAMSS_8250 || version == CAMSS_845) {
ret = vfe_get(vfe);
if (ret < 0)
return ret;
@@ -212,7 +213,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
camss_disable_clocks(csid->nclocks, csid->clock);
ret = csid->vdda ? regulator_disable(csid->vdda) : 0;
pm_runtime_put_sync(dev);
- if (camss->version == CAMSS_8250)
+ if (version == CAMSS_8250 || version == CAMSS_845)
vfe_put(vfe);
}
--
2.33.0
^ permalink raw reply related [flat|nested] 25+ messages in thread* Re: [PATCH v2 19/19] media: camss: Apply vfe_get/vfe_put fix to SDM845
2021-11-24 17:59 ` [PATCH v2 19/19] media: camss: Apply vfe_get/vfe_put fix to SDM845 Bryan O'Donoghue
@ 2021-11-25 10:45 ` Robert Foss
0 siblings, 0 replies; 25+ messages in thread
From: Robert Foss @ 2021-11-25 10:45 UTC (permalink / raw)
To: Bryan O'Donoghue
Cc: linux-arm-msm, linux-media, jonathan, andrey.konovalov,
todor.too, agross, bjorn.andersson, mchehab, jgrahsl, hfink
Thanks for submitting this!
On Wed, 24 Nov 2021 at 18:57, Bryan O'Donoghue
<bryan.odonoghue@linaro.org> wrote:
>
> Similar to the SM8250 the CSID relies on the VFE to be clocked prior to
> taking the CSID out of reset.
>
> Apply the same fixup to SDM845 as SM8250.
>
> Suggested-by: Robert Foss <robert.foss@linaro.org>
> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> drivers/media/platform/qcom/camss/camss-csid.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
> index e6835b92695b..32f82e471bae 100644
> --- a/drivers/media/platform/qcom/camss/camss-csid.c
> +++ b/drivers/media/platform/qcom/camss/camss-csid.c
> @@ -159,10 +159,11 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
> struct camss *camss = csid->camss;
> struct device *dev = camss->dev;
> struct vfe_device *vfe = &camss->vfe[csid->id];
> + u32 version = camss->version;
> int ret;
>
> if (on) {
> - if (camss->version == CAMSS_8250) {
> + if (version == CAMSS_8250 || version == CAMSS_845) {
> ret = vfe_get(vfe);
> if (ret < 0)
> return ret;
> @@ -212,7 +213,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
> camss_disable_clocks(csid->nclocks, csid->clock);
> ret = csid->vdda ? regulator_disable(csid->vdda) : 0;
> pm_runtime_put_sync(dev);
> - if (camss->version == CAMSS_8250)
> + if (version == CAMSS_8250 || version == CAMSS_845)
> vfe_put(vfe);
> }
>
> --
> 2.33.0
>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
^ permalink raw reply [flat|nested] 25+ messages in thread