All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Pali Rohár" <pali@kernel.org>,
	"Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH u-boot-marvell v2 9/9] arm: mvebu: spl: Fix 100 column exceeds
Date: Fri, 26 Nov 2021 15:37:38 +0100	[thread overview]
Message-ID: <20211126143738.23830-10-kabel@kernel.org> (raw)
In-Reply-To: <20211126143738.23830-1-kabel@kernel.org>

From: Marek Behún <marek.behun@nic.cz>

Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
 arch/arm/mach-mvebu/spl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 7dbe8eeba3..7450e1e3da 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -47,7 +47,8 @@
 #if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR != 0
 #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR must be set to 0
 #endif
-#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
+#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && \
+    CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
 #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET must be set to 0
 #endif
 #endif
@@ -58,7 +59,8 @@
  * set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
  */
 #ifdef CONFIG_SPL_SATA
-#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
+#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || \
+    !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
 #error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
 #endif
 #endif
-- 
2.32.0


  parent reply	other threads:[~2021-11-26 14:39 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-26 14:37 [PATCH u-boot-marvell v2 0/9] More verifications for kwbimage in SPL Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 1/9] arm: mvebu: Check that kwbimage offset and blocksize are valid Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 2/9] SPL: Add struct spl_boot_device parameter into spl_parse_board_header() Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 3/9] arm: mvebu: Check that kwbimage blockid matches boot mode Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 4/9] SPL: Add support for checking board / BootROM specific image types Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 5/9] arm: mvebu: Check for kwbimage data checksum Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 6/9] arm: mvebu: spl: Print srcaddr in error message Marek Behún
2021-11-30  6:20   ` Stefan Roese
2021-12-14 11:10   ` Pali Rohár
2021-12-14 13:11     ` Marek Behún
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 7/9] arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t Marek Behún
2021-11-30  6:20   ` Stefan Roese
2021-11-26 14:37 ` [PATCH u-boot-marvell v2 8/9] arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible Marek Behún
2021-11-30  6:22   ` Stefan Roese
2021-12-14  9:36   ` Pali Rohár
2021-12-14  9:45     ` Marek Behún
2021-12-14 11:12       ` Pali Rohár
2021-12-14 12:45         ` Marek Behún
2021-12-14 12:48           ` Stefan Roese
2021-12-14 13:01             ` Marek Behún
2021-12-16 18:16               ` Pali Rohár
2021-12-16 22:09                 ` Marek Behún
2021-12-16 22:17                   ` Marek Behún
2021-11-26 14:37 ` Marek Behún [this message]
2021-11-30  6:22   ` [PATCH u-boot-marvell v2 9/9] arm: mvebu: spl: Fix 100 column exceeds Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211126143738.23830-10-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=marek.behun@nic.cz \
    --cc=pali@kernel.org \
    --cc=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.