* [PATCH -next v2] doc/zh-CN: Update cpu-freq/core.rst to make it more readable
@ 2021-12-02 13:02 Tang Yizhou
2021-12-07 3:24 ` Tang Yizhou
0 siblings, 1 reply; 3+ messages in thread
From: Tang Yizhou @ 2021-12-02 13:02 UTC (permalink / raw)
To: siyanteng, alexs, seakeel
Cc: linux-doc, corbet, zhengbin13, tangyeechou, Tang Yizhou
These Chinese translations are easier to understand.
Also update the first memeber of struct cpufreq_freqs.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Acked-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
---
v2:
1. Take Yangteng's advice.
2. Add proofreader.
3. Add Acked-by and Reviewed-by tag.
.../translations/zh_CN/cpu-freq/core.rst | 24 ++++++++++---------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/Documentation/translations/zh_CN/cpu-freq/core.rst b/Documentation/translations/zh_CN/cpu-freq/core.rst
index 0c6fd447ced6..b3c095306ffe 100644
--- a/Documentation/translations/zh_CN/cpu-freq/core.rst
+++ b/Documentation/translations/zh_CN/cpu-freq/core.rst
@@ -7,7 +7,9 @@
司延腾 Yanteng Si <siyanteng@loongson.cn>
-.. _cn_core.rst:
+:校译:
+
+ 唐艺舟 Tang Yizhou <tangyeechou@gmail.com>
====================================
CPUFreq核心和CPUFreq通知器的通用说明
@@ -29,10 +31,10 @@ CPUFreq核心和CPUFreq通知器的通用说明
======================
cpufreq核心代码位于drivers/cpufreq/cpufreq.c中。这些cpufreq代码为CPUFreq架构的驱
-动程序(那些操作硬件切换频率的代码)以及 "通知器 "提供了一个标准化的接口。
-这些是设备驱动程序或需要了解策略变化的其它内核部分(如 ACPI 热量管理)或所有频率更改(除
-计时代码外),甚至需要强制确定速度限制的通知器(如 ARM 架构上的 LCD 驱动程序)。
-此外, 内核 "常数" loops_per_jiffy会根据频率变化而更新。
+动程序(那些执行硬件频率切换的代码)以及 "通知器" 提供了一个标准化的接口。
+包括设备驱动程序;需要了解策略变化(如 ACPI 热量管理),或所有频率变化(如计时代码),
+甚至需要强制限制为指定频率(如 ARM 架构上的 LCD 驱动程序)的其它内核组件。
+此外,内核 "常数" loops_per_jiffy 会根据频率变化而更新。
cpufreq策略的引用计数由 cpufreq_cpu_get 和 cpufreq_cpu_put 来完成,以确保 cpufreq 驱
动程序被正确地注册到核心中,并且驱动程序在 cpufreq_put_cpu 被调用之前不会被卸载。这也保证
@@ -41,7 +43,7 @@ cpufreq策略的引用计数由 cpufreq_cpu_get 和 cpufreq_cpu_put 来完成,
2. CPUFreq 通知器
====================
-CPUFreq通知器符合标准的内核通知器接口。
+CPUFreq通知器遵循标准的内核通知器接口。
关于通知器的细节请参阅 linux/include/linux/notifier.h。
这里有两个不同的CPUfreq通知器 - 策略通知器和转换通知器。
@@ -69,20 +71,20 @@ CPUFreq通知器符合标准的内核通知器接口。
第三个参数是一个包含如下值的结构体cpufreq_freqs:
-===== ====================
-cpu 受影响cpu的编号
+====== ===============================
+policy 指向struct cpufreq_policy的指针
old 旧频率
new 新频率
flags cpufreq驱动的标志
-===== ====================
+====== ===============================
3. 含有Operating Performance Point (OPP)的CPUFreq表的生成
==================================================================
关于OPP的细节请参阅 Documentation/power/opp.rst
dev_pm_opp_init_cpufreq_table -
- 这个功能提供了一个随时可用的转换程序,用来将OPP层关于可用频率的内部信息翻译成一种容易提供给
- cpufreq的格式。
+ 这个函数提供了一个随时可用的转换例程,用来将OPP层关于可用频率的内部信息翻译成一种
+ cpufreq易于处理的格式。
.. Warning::
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH -next v2] doc/zh-CN: Update cpu-freq/core.rst to make it more readable
2021-12-02 13:02 [PATCH -next v2] doc/zh-CN: Update cpu-freq/core.rst to make it more readable Tang Yizhou
@ 2021-12-07 3:24 ` Tang Yizhou
2021-12-10 21:30 ` Jonathan Corbet
0 siblings, 1 reply; 3+ messages in thread
From: Tang Yizhou @ 2021-12-07 3:24 UTC (permalink / raw)
To: siyanteng, alexs, seakeel, yanteng si, corbet
Cc: linux-doc, zhengbin13, tangyeechou
On 2021/12/2 21:02, Tang Yizhou wrote:
> These Chinese translations are easier to understand.
>
> Also update the first memeber of struct cpufreq_freqs.
>
> Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
> Acked-by: Yanteng Si <siyanteng@loongson.cn>
> Reviewed-by: Alex Shi <alexs@kernel.org>
> ---
> v2:
> 1. Take Yangteng's advice.
> 2. Add proofreader.
> 3. Add Acked-by and Reviewed-by tag.
>
> .../translations/zh_CN/cpu-freq/core.rst | 24 ++++++++++---------
> 1 file changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/translations/zh_CN/cpu-freq/core.rst b/Documentation/translations/zh_CN/cpu-freq/core.rst
> index 0c6fd447ced6..b3c095306ffe 100644
> --- a/Documentation/translations/zh_CN/cpu-freq/core.rst
> +++ b/Documentation/translations/zh_CN/cpu-freq/core.rst
> @@ -7,7 +7,9 @@
>
> 司延腾 Yanteng Si <siyanteng@loongson.cn>
>
> -.. _cn_core.rst:
> +:校译:
> +
> + 唐艺舟 Tang Yizhou <tangyeechou@gmail.com>
>
> ====================================
> CPUFreq核心和CPUFreq通知器的通用说明
> @@ -29,10 +31,10 @@ CPUFreq核心和CPUFreq通知器的通用说明
> ======================
>
> cpufreq核心代码位于drivers/cpufreq/cpufreq.c中。这些cpufreq代码为CPUFreq架构的驱
> -动程序(那些操作硬件切换频率的代码)以及 "通知器 "提供了一个标准化的接口。
> -这些是设备驱动程序或需要了解策略变化的其它内核部分(如 ACPI 热量管理)或所有频率更改(除
> -计时代码外),甚至需要强制确定速度限制的通知器(如 ARM 架构上的 LCD 驱动程序)。
> -此外, 内核 "常数" loops_per_jiffy会根据频率变化而更新。
> +动程序(那些执行硬件频率切换的代码)以及 "通知器" 提供了一个标准化的接口。
> +包括设备驱动程序;需要了解策略变化(如 ACPI 热量管理),或所有频率变化(如计时代码),
> +甚至需要强制限制为指定频率(如 ARM 架构上的 LCD 驱动程序)的其它内核组件。
> +此外,内核 "常数" loops_per_jiffy 会根据频率变化而更新。
>
> cpufreq策略的引用计数由 cpufreq_cpu_get 和 cpufreq_cpu_put 来完成,以确保 cpufreq 驱
> 动程序被正确地注册到核心中,并且驱动程序在 cpufreq_put_cpu 被调用之前不会被卸载。这也保证
> @@ -41,7 +43,7 @@ cpufreq策略的引用计数由 cpufreq_cpu_get 和 cpufreq_cpu_put 来完成,
> 2. CPUFreq 通知器
> ====================
>
> -CPUFreq通知器符合标准的内核通知器接口。
> +CPUFreq通知器遵循标准的内核通知器接口。
> 关于通知器的细节请参阅 linux/include/linux/notifier.h。
>
> 这里有两个不同的CPUfreq通知器 - 策略通知器和转换通知器。
> @@ -69,20 +71,20 @@ CPUFreq通知器符合标准的内核通知器接口。
>
> 第三个参数是一个包含如下值的结构体cpufreq_freqs:
>
> -===== ====================
> -cpu 受影响cpu的编号
> +====== ===============================
> +policy 指向struct cpufreq_policy的指针
> old 旧频率
> new 新频率
> flags cpufreq驱动的标志
> -===== ====================
> +====== ===============================
>
> 3. 含有Operating Performance Point (OPP)的CPUFreq表的生成
> ==================================================================
> 关于OPP的细节请参阅 Documentation/power/opp.rst
>
> dev_pm_opp_init_cpufreq_table -
> - 这个功能提供了一个随时可用的转换程序,用来将OPP层关于可用频率的内部信息翻译成一种容易提供给
> - cpufreq的格式。
> + 这个函数提供了一个随时可用的转换例程,用来将OPP层关于可用频率的内部信息翻译成一种
> + cpufreq易于处理的格式。
>
> .. Warning::
>
>
Hi, jon! Could you please apply this patch? Thanks.
Tang
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH -next v2] doc/zh-CN: Update cpu-freq/core.rst to make it more readable
2021-12-07 3:24 ` Tang Yizhou
@ 2021-12-10 21:30 ` Jonathan Corbet
0 siblings, 0 replies; 3+ messages in thread
From: Jonathan Corbet @ 2021-12-10 21:30 UTC (permalink / raw)
To: Tang Yizhou, siyanteng, alexs, seakeel, yanteng si
Cc: linux-doc, zhengbin13, tangyeechou
Tang Yizhou <tangyizhou@huawei.com> writes:
> On 2021/12/2 21:02, Tang Yizhou wrote:
>> These Chinese translations are easier to understand.
>>
>> Also update the first memeber of struct cpufreq_freqs.
>>
>> Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
>> Acked-by: Yanteng Si <siyanteng@loongson.cn>
>> Reviewed-by: Alex Shi <alexs@kernel.org>
>> ---
>> v2:
>> 1. Take Yangteng's advice.
>> 2. Add proofreader.
>> 3. Add Acked-by and Reviewed-by tag.
> Hi, jon! Could you please apply this patch? Thanks.
Done.
Please note, though, that four days is to soon to start nagging
maintainers to apply patches.
Thanks,
jon
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-12-10 21:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-02 13:02 [PATCH -next v2] doc/zh-CN: Update cpu-freq/core.rst to make it more readable Tang Yizhou
2021-12-07 3:24 ` Tang Yizhou
2021-12-10 21:30 ` Jonathan Corbet
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.