[PATCH 0/8] ADSP/CDSP/MPSS support for sm6350 and Fairphone 4

[PATCH 0/8] ADSP/CDSP/MPSS support for sm6350 and Fairphone 4

[Luca Weiss]

This patch series adds support for the remoteprocs found in
sm6350/sm7225 and enables them on the Fairphone 4 smartphone.

Luca Weiss (8):
  dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
  remoteproc: qcom: pas: Add SM6350 MPSS support
  arm64: dts: qcom: sm6350: Add MPSS nodes
  remoteproc: qcom: pas: Add SM6350 ADSP support
  arm64: dts: qcom: sm6350: Add ADSP nodes
  remoteproc: qcom: pas: Add SM6350 CDSP support
  arm64: dts: qcom: sm6350: Add CDSP nodes
  arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS

 .../bindings/remoteproc/qcom,adsp.yaml        |  28 ++
 arch/arm64/boot/dts/qcom/sm6350.dtsi          | 279 ++++++++++++++++++
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    |  31 ++
 drivers/remoteproc/qcom_q6v5_pas.c            |  37 +++
 4 files changed, 375 insertions(+)

-- 
2.34.1

[PATCH 1/8] dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss

[Luca Weiss]

Add compatibles for the remoteprocs found in SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 .../bindings/remoteproc/qcom,adsp.yaml        | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 63e06d93bca3..c635c181d2c2 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -33,6 +33,9 @@ properties:
       - qcom,sdm845-adsp-pas
       - qcom,sdm845-cdsp-pas
       - qcom,sdx55-mpss-pas
+      - qcom,sm6350-adsp-pas
+      - qcom,sm6350-cdsp-pas
+      - qcom,sm6350-mpss-pas
       - qcom,sm8150-adsp-pas
       - qcom,sm8150-cdsp-pas
       - qcom,sm8150-mpss-pas
@@ -158,6 +161,9 @@ allOf:
               - qcom,sc8180x-mpss-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-adsp-pas
               - qcom,sm8150-cdsp-pas
               - qcom,sm8150-mpss-pas
@@ -266,6 +272,8 @@ allOf:
               - qcom,sc8180x-cdsp-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
               - qcom,sm8150-adsp-pas
               - qcom,sm8150-cdsp-pas
               - qcom,sm8150-slpi-pas
@@ -301,6 +309,7 @@ allOf:
               - qcom,sc7280-mpss-pas
               - qcom,sc8180x-mpss-pas
               - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
     then:
@@ -385,6 +394,23 @@ allOf:
             - const: mx
             - const: mss
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MX power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mx
+
   - if:
       properties:
         compatible:
@@ -405,6 +431,7 @@ allOf:
             enum:
               - qcom,sc7280-mpss-pas
               - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
     then:
@@ -425,6 +452,7 @@ allOf:
             enum:
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
+              - qcom,sm6350-adsp-pas
               - qcom,sm8150-slpi-pas
               - qcom,sm8250-adsp-pas
               - qcom,sm8250-slpi-pas
-- 
2.34.1

Re: [PATCH 1/8] dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss

[Rob Herring]

On Mon, 13 Dec 2021 09:22:01 +0100, Luca Weiss wrote:
> Add compatibles for the remoteprocs found in SM6350.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
>  .../bindings/remoteproc/qcom,adsp.yaml        | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH 2/8] remoteproc: qcom: pas: Add SM6350 MPSS support

[Luca Weiss]

Add a config for the MPSS present on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 03857dc9cdc1..2d43aa0dfeb7 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -804,6 +804,7 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sdm845-adsp-pas", .data = &sdm845_adsp_resource_init},
 	{ .compatible = "qcom,sdm845-cdsp-pas", .data = &sdm845_cdsp_resource_init},
 	{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
+	{ .compatible = "qcom,sm6350-mpss-pas", .data = &mpss_resource_init},
 	{ .compatible = "qcom,sm8150-adsp-pas", .data = &sm8150_adsp_resource},
 	{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
 	{ .compatible = "qcom,sm8150-mpss-pas", .data = &mpss_resource_init},
-- 
2.34.1

[PATCH 3/8] arm64: dts: qcom: sm6350: Add MPSS nodes

[Luca Weiss]

Add the required nodes for booting the MPSS on sm6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 66 ++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 973e18fe3b67..9f9d4d916470 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -361,6 +361,32 @@ smem {
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -473,6 +499,46 @@ tcsr_mutex: hwlock@1f40000 {
 			#hwlock-cells = <1>;
 		};
 
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm6350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
-- 
2.34.1

[PATCH 4/8] remoteproc: qcom: pas: Add SM6350 ADSP support

[Luca Weiss]

Add a config for the ADSP present on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 2d43aa0dfeb7..1d28036e0265 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -524,6 +524,23 @@ static const struct adsp_data sdm845_adsp_resource_init = {
 		.ssctl_id = 0x14,
 };
 
+static const struct adsp_data sm6350_adsp_resource = {
+	.crash_reason_smem = 423,
+	.firmware_name = "adsp.mdt",
+	.pas_id = 1,
+	.has_aggre2_clk = false,
+	.auto_boot = true,
+	.proxy_pd_names = (char*[]){
+		"lcx",
+		"lmx",
+		NULL
+	},
+	.load_state = "adsp",
+	.ssr_name = "lpass",
+	.sysmon_name = "adsp",
+	.ssctl_id = 0x14,
+};
+
 static const struct adsp_data sm8150_adsp_resource = {
 		.crash_reason_smem = 423,
 		.firmware_name = "adsp.mdt",
@@ -804,6 +821,7 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sdm845-adsp-pas", .data = &sdm845_adsp_resource_init},
 	{ .compatible = "qcom,sdm845-cdsp-pas", .data = &sdm845_cdsp_resource_init},
 	{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
+	{ .compatible = "qcom,sm6350-adsp-pas", .data = &sm6350_adsp_resource},
 	{ .compatible = "qcom,sm6350-mpss-pas", .data = &mpss_resource_init},
 	{ .compatible = "qcom,sm8150-adsp-pas", .data = &sm8150_adsp_resource},
 	{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
-- 
2.34.1

[PATCH 5/8] arm64: dts: qcom: sm6350: Add ADSP nodes

[Luca Weiss]

Add the required nodes for booting the ADSP on sm6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 91 ++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 9f9d4d916470..2ae7899bdc39 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -361,6 +361,30 @@ smem {
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	smp2p-mpss {
 		compatible = "qcom,smp2p";
 		qcom,smem = <435>, <428>;
@@ -499,6 +523,73 @@ tcsr_mutex: hwlock@1f40000 {
 			#hwlock-cells = <1>;
 		};
 
+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm6350-adsp-pas";
+			reg = <0 0x03000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_LCX>,
+					<&rpmhpd SM6350_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0>;
+						qcom,nsessions = <5>;
+					};
+				};
+			};
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm6350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
-- 
2.34.1

[PATCH 6/8] remoteproc: qcom: pas: Add SM6350 CDSP support

[Luca Weiss]

Add a config for the CDSP present on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 1d28036e0265..370a70e25722 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -629,6 +629,23 @@ static const struct adsp_data sdm845_cdsp_resource_init = {
 	.ssctl_id = 0x17,
 };
 
+static const struct adsp_data sm6350_cdsp_resource = {
+	.crash_reason_smem = 601,
+	.firmware_name = "cdsp.mdt",
+	.pas_id = 18,
+	.has_aggre2_clk = false,
+	.auto_boot = true,
+	.proxy_pd_names = (char*[]){
+		"cx",
+		"mx",
+		NULL
+	},
+	.load_state = "cdsp",
+	.ssr_name = "cdsp",
+	.sysmon_name = "cdsp",
+	.ssctl_id = 0x17,
+};
+
 static const struct adsp_data sm8150_cdsp_resource = {
 	.crash_reason_smem = 601,
 	.firmware_name = "cdsp.mdt",
@@ -822,6 +839,7 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sdm845-cdsp-pas", .data = &sdm845_cdsp_resource_init},
 	{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
 	{ .compatible = "qcom,sm6350-adsp-pas", .data = &sm6350_adsp_resource},
+	{ .compatible = "qcom,sm6350-cdsp-pas", .data = &sm6350_cdsp_resource},
 	{ .compatible = "qcom,sm6350-mpss-pas", .data = &mpss_resource_init},
 	{ .compatible = "qcom,sm8150-adsp-pas", .data = &sm8150_adsp_resource},
 	{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
-- 
2.34.1

[PATCH 7/8] arm64: dts: qcom: sm6350: Add CDSP nodes

[Luca Weiss]

Add the required nodes for booting the CDSP on sm6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 122 +++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 2ae7899bdc39..a7158fe9e192 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -385,6 +385,30 @@ smp2p_adsp_in: slave-kernel {
 		};
 	};
 
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	smp2p-mpss {
 		compatible = "qcom,smp2p";
 		qcom,smem = <435>, <428>;
@@ -630,6 +654,104 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 			};
 		};
 
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm6350-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1401 0x20>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1402 0x20>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1403 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1404 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1405 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1406 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1407 0x20>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1408 0x20>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
-- 
2.34.1

[PATCH 8/8] arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS

[Luca Weiss]

Enable the remoteprocs found on the SoC and add a qcom,rmtfs-mem node.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index ff07b7e8d64f..1ce606e66474 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -53,6 +53,27 @@ volume-up {
 			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	reserved-memory {
+		/*
+		 * The rmtfs memory region in downstream is 'dynamically allocated'
+		 * but given the same address every time. Hard code it as this address is
+		 * where the modem firmware expects it to be.
+		 */
+		memory@efe01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xefe01000 0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
 };
 
 &apps_rsc {
@@ -269,6 +290,16 @@ vreg_bob: bob {
 	};
 };
 
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+};
+
 &pm6150l_wled {
 	status = "okay";
 
-- 
2.34.1

Re: (subset) [PATCH 0/8] ADSP/CDSP/MPSS support for sm6350 and Fairphone 4

[Bjorn Andersson]

On Mon, 13 Dec 2021 09:22:00 +0100, Luca Weiss wrote:
> This patch series adds support for the remoteprocs found in
> sm6350/sm7225 and enables them on the Fairphone 4 smartphone.
> 
> Luca Weiss (8):
>   dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
>   remoteproc: qcom: pas: Add SM6350 MPSS support
>   arm64: dts: qcom: sm6350: Add MPSS nodes
>   remoteproc: qcom: pas: Add SM6350 ADSP support
>   arm64: dts: qcom: sm6350: Add ADSP nodes
>   remoteproc: qcom: pas: Add SM6350 CDSP support
>   arm64: dts: qcom: sm6350: Add CDSP nodes
>   arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS
> 
> [...]

Applied, thanks!

[3/8] arm64: dts: qcom: sm6350: Add MPSS nodes
      commit: 489be59b635ba76ea16d6f820ddf037644b3415a
[5/8] arm64: dts: qcom: sm6350: Add ADSP nodes
      commit: efc33c969f23cd6fe983e7e7bdcd8bbb1521f1de
[7/8] arm64: dts: qcom: sm6350: Add CDSP nodes
      commit: 8eb5287e8a425aa7b27cfbb92096550046a231f8
[8/8] arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS
      commit: bc279dc04e9ee23f6a22f6c7a6924edbd5fe0f6d

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>