From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-media@vger.kernel.org>, <robh+dt@kernel.org>, <jacopo@jmondi.org>, <laurent.pinchart@ideasonboard.com>, <sakari.ailus@iki.fi> Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <nicolas.ferre@microchip.com>, "Eugen Hristev" <eugen.hristev@microchip.com> Subject: [PATCH v3 11/23] media: atmel: atmel-isc-base: fix bytesperline value for planar formats Date: Mon, 13 Dec 2021 15:49:28 +0200 [thread overview] Message-ID: <20211213134940.324266-12-eugen.hristev@microchip.com> (raw) In-Reply-To: <20211213134940.324266-1-eugen.hristev@microchip.com> The bytesperline field of the pixfmt should be only for the first plane in case of planar formats like YUV420 or YUV422. The bytesperline is used by the driver to compute the framesize. We have to report a different bpp (bytes per pixel) to v4l2 in bytesperline than the actual bpp. For example for YUV420, the real bpp is 12, but the first plane has only 8 bpp. Thus we report a bytesperline 8*width instead of 12*width. However, for real framezise we have to compute 12*width*height. Hence added a new variable to hold this information and to correctly compute the frame size. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- drivers/media/platform/atmel/atmel-isc-base.c | 19 +++++++++++++++++-- drivers/media/platform/atmel/atmel-isc.h | 4 ++++ 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c index 2cb8446ff90c..d0542b97a391 100644 --- a/drivers/media/platform/atmel/atmel-isc-base.c +++ b/drivers/media/platform/atmel/atmel-isc-base.c @@ -654,6 +654,7 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED8; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 8; + isc->try_config.bpp_v4l2 = 8; break; case V4L2_PIX_FMT_SBGGR10: case V4L2_PIX_FMT_SGBRG10: @@ -663,6 +664,7 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_SBGGR12: case V4L2_PIX_FMT_SGBRG12: @@ -672,24 +674,28 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_RGB565: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_RGB565; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_ARGB444: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB444; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_ARGB555: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB555; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_ABGR32: case V4L2_PIX_FMT_XBGR32: @@ -697,42 +703,49 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 32; + isc->try_config.bpp_v4l2 = 32; break; case V4L2_PIX_FMT_YUV420: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_YC420P; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PLANAR; isc->try_config.bpp = 12; + isc->try_config.bpp_v4l2 = 8; /* only first plane */ break; case V4L2_PIX_FMT_YUV422P: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_YC422P; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PLANAR; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 8; /* only first plane */ break; case V4L2_PIX_FMT_YUYV: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_YUYV; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_UYVY: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_UYVY; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_VYUY: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_VYUY; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_GREY: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY8; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED8; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 8; + isc->try_config.bpp_v4l2 = 8; break; case V4L2_PIX_FMT_Y16: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10 | ISC_RLP_CFG_LSH; @@ -742,6 +755,7 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; default: return -EINVAL; @@ -990,8 +1004,9 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f, pixfmt->height = isc->max_height; pixfmt->field = V4L2_FIELD_NONE; - pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3; - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp_v4l2) >> 3; + pixfmt->sizeimage = ((pixfmt->width * isc->try_config.bpp) >> 3) * + pixfmt->height; if (code) *code = mbus_code; diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h index 32448ccfc636..07fa6dbf8460 100644 --- a/drivers/media/platform/atmel/atmel-isc.h +++ b/drivers/media/platform/atmel/atmel-isc.h @@ -102,6 +102,9 @@ struct isc_format { configuration. * @fourcc: Fourcc code for this format. * @bpp: Bytes per pixel in the current format. + * @bpp_v4l2: Bytes per pixel in the current format, for v4l2. + This differs from 'bpp' in the sense that in planar + formats, it refers only to the first plane. * @rlp_cfg_mode: Configuration of the RLP (rounding, limiting packaging) * @dcfg_imode: Configuration of the input of the DMA module * @dctrl_dview: Configuration of the output of the DMA module @@ -112,6 +115,7 @@ struct fmt_config { u32 fourcc; u8 bpp; + u8 bpp_v4l2; u32 rlp_cfg_mode; u32 dcfg_imode; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-media@vger.kernel.org>, <robh+dt@kernel.org>, <jacopo@jmondi.org>, <laurent.pinchart@ideasonboard.com>, <sakari.ailus@iki.fi> Cc: devicetree@vger.kernel.org, Eugen Hristev <eugen.hristev@microchip.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 11/23] media: atmel: atmel-isc-base: fix bytesperline value for planar formats Date: Mon, 13 Dec 2021 15:49:28 +0200 [thread overview] Message-ID: <20211213134940.324266-12-eugen.hristev@microchip.com> (raw) In-Reply-To: <20211213134940.324266-1-eugen.hristev@microchip.com> The bytesperline field of the pixfmt should be only for the first plane in case of planar formats like YUV420 or YUV422. The bytesperline is used by the driver to compute the framesize. We have to report a different bpp (bytes per pixel) to v4l2 in bytesperline than the actual bpp. For example for YUV420, the real bpp is 12, but the first plane has only 8 bpp. Thus we report a bytesperline 8*width instead of 12*width. However, for real framezise we have to compute 12*width*height. Hence added a new variable to hold this information and to correctly compute the frame size. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- drivers/media/platform/atmel/atmel-isc-base.c | 19 +++++++++++++++++-- drivers/media/platform/atmel/atmel-isc.h | 4 ++++ 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c index 2cb8446ff90c..d0542b97a391 100644 --- a/drivers/media/platform/atmel/atmel-isc-base.c +++ b/drivers/media/platform/atmel/atmel-isc-base.c @@ -654,6 +654,7 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED8; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 8; + isc->try_config.bpp_v4l2 = 8; break; case V4L2_PIX_FMT_SBGGR10: case V4L2_PIX_FMT_SGBRG10: @@ -663,6 +664,7 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_SBGGR12: case V4L2_PIX_FMT_SGBRG12: @@ -672,24 +674,28 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_RGB565: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_RGB565; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_ARGB444: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB444; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_ARGB555: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB555; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_ABGR32: case V4L2_PIX_FMT_XBGR32: @@ -697,42 +703,49 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 32; + isc->try_config.bpp_v4l2 = 32; break; case V4L2_PIX_FMT_YUV420: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_YC420P; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PLANAR; isc->try_config.bpp = 12; + isc->try_config.bpp_v4l2 = 8; /* only first plane */ break; case V4L2_PIX_FMT_YUV422P: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_YC422P; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PLANAR; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 8; /* only first plane */ break; case V4L2_PIX_FMT_YUYV: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_YUYV; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_UYVY: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_UYVY; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_VYUY: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_VYUY; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; case V4L2_PIX_FMT_GREY: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY8; isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED8; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 8; + isc->try_config.bpp_v4l2 = 8; break; case V4L2_PIX_FMT_Y16: isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10 | ISC_RLP_CFG_LSH; @@ -742,6 +755,7 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; break; default: return -EINVAL; @@ -990,8 +1004,9 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f, pixfmt->height = isc->max_height; pixfmt->field = V4L2_FIELD_NONE; - pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3; - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp_v4l2) >> 3; + pixfmt->sizeimage = ((pixfmt->width * isc->try_config.bpp) >> 3) * + pixfmt->height; if (code) *code = mbus_code; diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h index 32448ccfc636..07fa6dbf8460 100644 --- a/drivers/media/platform/atmel/atmel-isc.h +++ b/drivers/media/platform/atmel/atmel-isc.h @@ -102,6 +102,9 @@ struct isc_format { configuration. * @fourcc: Fourcc code for this format. * @bpp: Bytes per pixel in the current format. + * @bpp_v4l2: Bytes per pixel in the current format, for v4l2. + This differs from 'bpp' in the sense that in planar + formats, it refers only to the first plane. * @rlp_cfg_mode: Configuration of the RLP (rounding, limiting packaging) * @dcfg_imode: Configuration of the input of the DMA module * @dctrl_dview: Configuration of the output of the DMA module @@ -112,6 +115,7 @@ struct fmt_config { u32 fourcc; u8 bpp; + u8 bpp_v4l2; u32 rlp_cfg_mode; u32 dcfg_imode; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-12-13 13:53 UTC|newest] Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-13 13:49 [PATCH v3 00/23] media: atmel: atmel-isc: implement media controller Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 01/23] MAINTAINERS: add microchip csi2dc Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 02/23] dt-bindings: media: atmel: csi2dc: add bindings for " Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-15 20:16 ` Rob Herring 2021-12-15 20:16 ` Rob Herring 2021-12-13 13:49 ` [PATCH v3 03/23] media: atmel: introduce microchip csi2dc driver Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-11 15:43 ` Jacopo Mondi 2022-01-11 15:43 ` Jacopo Mondi 2021-12-13 13:49 ` [PATCH v3 04/23] media: atmel: atmel-isc: split the clock code into separate source file Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-11 15:43 ` Jacopo Mondi 2022-01-11 15:43 ` Jacopo Mondi 2021-12-13 13:49 ` [PATCH v3 05/23] media: atmel: atmel-isc: replace video device name with module name Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 06/23] media: atmel: atmel-sama7g5-isc: fix ispck leftover Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 07/23] media: atmel: atmel-isc-base: use streaming status when queueing buffers Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-11 15:53 ` Hans Verkuil 2022-01-11 15:53 ` Hans Verkuil 2022-01-11 16:38 ` Eugen.Hristev 2022-01-11 16:38 ` Eugen.Hristev 2022-01-12 9:52 ` Hans Verkuil 2022-01-12 9:52 ` Hans Verkuil 2021-12-13 13:49 ` [PATCH v3 08/23] media: atmel: atmel-isc-base: remove frameintervals VIDIOC Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 09/23] media: atmel: atmel-isc-base: report frame sizes as full supported range Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 10/23] media: atmel: atmel-isc-base: implement mbus_code support in enumfmt Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev [this message] 2021-12-13 13:49 ` [PATCH v3 11/23] media: atmel: atmel-isc-base: fix bytesperline value for planar formats Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 12/23] media: atmel: atmel-isc: implement media controller Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-11 16:06 ` Jacopo Mondi 2022-01-11 16:06 ` Jacopo Mondi 2022-01-11 16:30 ` Eugen.Hristev 2022-01-11 16:30 ` Eugen.Hristev 2022-01-11 16:51 ` Jacopo Mondi 2022-01-11 16:51 ` Jacopo Mondi 2022-01-11 17:00 ` Eugen.Hristev 2022-01-11 17:00 ` Eugen.Hristev 2021-12-13 13:49 ` [PATCH v3 13/23] ARM: dts: at91: sama7g5: add nodes for video capture Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 14/23] ARM: configs: at91: sama7: add xisc and csi2dc Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 15/23] ARM: multi_v7_defconfig: add atmel video pipeline modules Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 16/23] media: atmel: atmel-sama5d2-isc: fix wrong mask in YUYV format check Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2021-12-13 13:49 ` [PATCH v3 17/23] media: atmel: atmel-isc-base: use mutex to lock awb workqueue from streaming Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-12 8:58 ` Jacopo Mondi 2022-01-12 8:58 ` Jacopo Mondi 2022-01-19 15:40 ` Eugen.Hristev 2022-01-19 15:40 ` Eugen.Hristev 2021-12-13 13:49 ` [PATCH v3 18/23] media: atmel: atmel-isc-base: add wb debug messages Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-12 9:00 ` Jacopo Mondi 2022-01-12 9:00 ` Jacopo Mondi 2021-12-13 13:49 ` [PATCH v3 19/23] media: atmel: atmel-isc-base: clamp wb gain coefficients Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-12 9:04 ` Jacopo Mondi 2022-01-12 9:04 ` Jacopo Mondi 2021-12-13 13:49 ` [PATCH v3 20/23] media: atmel: atmel-sama7g5-isc: fix UYVY input format mbus_code typo Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-12 9:04 ` Jacopo Mondi 2022-01-12 9:04 ` Jacopo Mondi 2021-12-13 13:49 ` [PATCH v3 21/23] media: atmel: atmel-isc: add raw Bayer 8bit 10bit output formats Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-12 9:05 ` Jacopo Mondi 2022-01-12 9:05 ` Jacopo Mondi 2021-12-13 13:49 ` [PATCH v3 22/23] media: atmel: atmel-isc: compact the controller formats list Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-12 9:06 ` Jacopo Mondi 2022-01-12 9:06 ` Jacopo Mondi 2021-12-13 13:49 ` [PATCH v3 23/23] media: atmel: atmel-isc: change format propagation to subdev into only verification Eugen Hristev 2021-12-13 13:49 ` Eugen Hristev 2022-01-12 9:21 ` Jacopo Mondi 2022-01-12 9:21 ` Jacopo Mondi 2022-01-20 8:43 ` Eugen.Hristev 2022-01-20 8:43 ` Eugen.Hristev 2022-01-20 8:48 ` Eugen.Hristev 2022-01-20 8:48 ` Eugen.Hristev 2022-01-20 8:58 ` Jacopo Mondi 2022-01-20 8:58 ` Jacopo Mondi 2022-01-12 12:07 ` [PATCH v3 00/23] media: atmel: atmel-isc: implement media controller Hans Verkuil 2022-01-12 12:07 ` Hans Verkuil 2022-01-12 12:46 ` Eugen.Hristev 2022-01-12 12:46 ` Eugen.Hristev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211213134940.324266-12-eugen.hristev@microchip.com \ --to=eugen.hristev@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=jacopo@jmondi.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ --cc=sakari.ailus@iki.fi \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.