* [PATCH 0/3] pinctrl: meson-s4: add pinctrl driver
@ 2021-12-14 2:20 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio, devicetree
This patchset adds Pin controller driver support for Meson-S4 SoC
which shares the same register layout with previous Meson-A1
Qianggui Song (3):
dt-bindings: pinctrl: meson: Add compatible for S4
dt-bindings: gpio: Add a header file for Amlogic Meson S4
pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
.../bindings/pinctrl/meson,pinctrl.txt | 1 +
drivers/pinctrl/meson/Kconfig | 6 +
drivers/pinctrl/meson/Makefile | 1 +
drivers/pinctrl/meson/pinctrl-meson-s4.c | 1229 +++++++++++++++++
include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++
5 files changed, 1336 insertions(+)
create mode 100644 drivers/pinctrl/meson/pinctrl-meson-s4.c
create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 0/3] pinctrl: meson-s4: add pinctrl driver
@ 2021-12-14 2:20 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio, devicetree
This patchset adds Pin controller driver support for Meson-S4 SoC
which shares the same register layout with previous Meson-A1
Qianggui Song (3):
dt-bindings: pinctrl: meson: Add compatible for S4
dt-bindings: gpio: Add a header file for Amlogic Meson S4
pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
.../bindings/pinctrl/meson,pinctrl.txt | 1 +
drivers/pinctrl/meson/Kconfig | 6 +
drivers/pinctrl/meson/Makefile | 1 +
drivers/pinctrl/meson/pinctrl-meson-s4.c | 1229 +++++++++++++++++
include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++
5 files changed, 1336 insertions(+)
create mode 100644 drivers/pinctrl/meson/pinctrl-meson-s4.c
create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 0/3] pinctrl: meson-s4: add pinctrl driver
@ 2021-12-14 2:20 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio, devicetree
This patchset adds Pin controller driver support for Meson-S4 SoC
which shares the same register layout with previous Meson-A1
Qianggui Song (3):
dt-bindings: pinctrl: meson: Add compatible for S4
dt-bindings: gpio: Add a header file for Amlogic Meson S4
pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
.../bindings/pinctrl/meson,pinctrl.txt | 1 +
drivers/pinctrl/meson/Kconfig | 6 +
drivers/pinctrl/meson/Makefile | 1 +
drivers/pinctrl/meson/pinctrl-meson-s4.c | 1229 +++++++++++++++++
include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++
5 files changed, 1336 insertions(+)
create mode 100644 drivers/pinctrl/meson/pinctrl-meson-s4.c
create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH 1/3] dt-bindings: pinctrl: meson: Add compatible for S4
2021-12-14 2:20 ` Qianggui Song
(?)
@ 2021-12-14 2:20 ` Qianggui Song
-1 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio
Add new compatible for Amlogic's Meson-S4 pin controller
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 0aff1f28495c..8146193bd8ac 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -16,6 +16,7 @@ Required properties for the root node:
"amlogic,meson-g12a-periphs-pinctrl"
"amlogic,meson-g12a-aobus-pinctrl"
"amlogic,meson-a1-periphs-pinctrl"
+ "amlogic,meson-s4-periphs-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 1/3] dt-bindings: pinctrl: meson: Add compatible for S4
@ 2021-12-14 2:20 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio
Add new compatible for Amlogic's Meson-S4 pin controller
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 0aff1f28495c..8146193bd8ac 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -16,6 +16,7 @@ Required properties for the root node:
"amlogic,meson-g12a-periphs-pinctrl"
"amlogic,meson-g12a-aobus-pinctrl"
"amlogic,meson-a1-periphs-pinctrl"
+ "amlogic,meson-s4-periphs-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 1/3] dt-bindings: pinctrl: meson: Add compatible for S4
@ 2021-12-14 2:20 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio
Add new compatible for Amlogic's Meson-S4 pin controller
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 0aff1f28495c..8146193bd8ac 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -16,6 +16,7 @@ Required properties for the root node:
"amlogic,meson-g12a-periphs-pinctrl"
"amlogic,meson-g12a-aobus-pinctrl"
"amlogic,meson-a1-periphs-pinctrl"
+ "amlogic,meson-s4-periphs-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
--
2.34.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4
2021-12-14 2:20 ` Qianggui Song
(?)
@ 2021-12-14 2:20 ` Qianggui Song
-1 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio, devicetree
Add a new dt-binding header file which documents the detail pin names.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++++++++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
diff --git a/include/dt-bindings/gpio/meson-s4-gpio.h b/include/dt-bindings/gpio/meson-s4-gpio.h
new file mode 100644
index 000000000000..35aee21b94f1
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-s4-gpio.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_S4_GPIO_H
+#define _DT_BINDINGS_MESON_S4_GPIO_H
+
+#define GPIOB_0 0
+#define GPIOB_1 1
+#define GPIOB_2 2
+#define GPIOB_3 3
+#define GPIOB_4 4
+#define GPIOB_5 5
+#define GPIOB_6 6
+#define GPIOB_7 7
+#define GPIOB_8 8
+#define GPIOB_9 9
+#define GPIOB_10 10
+#define GPIOB_11 11
+#define GPIOB_12 12
+#define GPIOB_13 13
+
+#define GPIOC_0 14
+#define GPIOC_1 15
+#define GPIOC_2 16
+#define GPIOC_3 17
+#define GPIOC_4 18
+#define GPIOC_5 19
+#define GPIOC_6 20
+#define GPIOC_7 21
+
+#define GPIOE_0 22
+#define GPIOE_1 23
+
+#define GPIOD_0 24
+#define GPIOD_1 25
+#define GPIOD_2 26
+#define GPIOD_3 27
+#define GPIOD_4 28
+#define GPIOD_5 29
+#define GPIOD_6 30
+#define GPIOD_7 31
+#define GPIOD_8 32
+#define GPIOD_9 33
+#define GPIOD_10 34
+#define GPIOD_11 35
+
+#define GPIOH_0 36
+#define GPIOH_1 37
+#define GPIOH_2 38
+#define GPIOH_3 39
+#define GPIOH_4 40
+#define GPIOH_5 41
+#define GPIOH_6 42
+#define GPIOH_7 43
+#define GPIOH_8 44
+#define GPIOH_9 45
+#define GPIOH_10 46
+#define GPIOH_11 47
+
+#define GPIOX_0 48
+#define GPIOX_1 49
+#define GPIOX_2 50
+#define GPIOX_3 51
+#define GPIOX_4 52
+#define GPIOX_5 53
+#define GPIOX_6 54
+#define GPIOX_7 55
+#define GPIOX_8 56
+#define GPIOX_9 57
+#define GPIOX_10 58
+#define GPIOX_11 59
+#define GPIOX_12 60
+#define GPIOX_13 61
+#define GPIOX_14 62
+#define GPIOX_15 63
+#define GPIOX_16 64
+#define GPIOX_17 65
+#define GPIOX_18 66
+#define GPIOX_19 67
+
+#define GPIOZ_0 68
+#define GPIOZ_1 69
+#define GPIOZ_2 70
+#define GPIOZ_3 71
+#define GPIOZ_4 72
+#define GPIOZ_5 73
+#define GPIOZ_6 74
+#define GPIOZ_7 75
+#define GPIOZ_8 76
+#define GPIOZ_9 77
+#define GPIOZ_10 78
+#define GPIOZ_11 79
+#define GPIOZ_12 80
+
+#define GPIO_TEST_N 81
+#endif /* _DT_BINDINGS_MESON_S4_GPIO_H */
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4
@ 2021-12-14 2:20 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio, devicetree
Add a new dt-binding header file which documents the detail pin names.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++++++++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
diff --git a/include/dt-bindings/gpio/meson-s4-gpio.h b/include/dt-bindings/gpio/meson-s4-gpio.h
new file mode 100644
index 000000000000..35aee21b94f1
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-s4-gpio.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_S4_GPIO_H
+#define _DT_BINDINGS_MESON_S4_GPIO_H
+
+#define GPIOB_0 0
+#define GPIOB_1 1
+#define GPIOB_2 2
+#define GPIOB_3 3
+#define GPIOB_4 4
+#define GPIOB_5 5
+#define GPIOB_6 6
+#define GPIOB_7 7
+#define GPIOB_8 8
+#define GPIOB_9 9
+#define GPIOB_10 10
+#define GPIOB_11 11
+#define GPIOB_12 12
+#define GPIOB_13 13
+
+#define GPIOC_0 14
+#define GPIOC_1 15
+#define GPIOC_2 16
+#define GPIOC_3 17
+#define GPIOC_4 18
+#define GPIOC_5 19
+#define GPIOC_6 20
+#define GPIOC_7 21
+
+#define GPIOE_0 22
+#define GPIOE_1 23
+
+#define GPIOD_0 24
+#define GPIOD_1 25
+#define GPIOD_2 26
+#define GPIOD_3 27
+#define GPIOD_4 28
+#define GPIOD_5 29
+#define GPIOD_6 30
+#define GPIOD_7 31
+#define GPIOD_8 32
+#define GPIOD_9 33
+#define GPIOD_10 34
+#define GPIOD_11 35
+
+#define GPIOH_0 36
+#define GPIOH_1 37
+#define GPIOH_2 38
+#define GPIOH_3 39
+#define GPIOH_4 40
+#define GPIOH_5 41
+#define GPIOH_6 42
+#define GPIOH_7 43
+#define GPIOH_8 44
+#define GPIOH_9 45
+#define GPIOH_10 46
+#define GPIOH_11 47
+
+#define GPIOX_0 48
+#define GPIOX_1 49
+#define GPIOX_2 50
+#define GPIOX_3 51
+#define GPIOX_4 52
+#define GPIOX_5 53
+#define GPIOX_6 54
+#define GPIOX_7 55
+#define GPIOX_8 56
+#define GPIOX_9 57
+#define GPIOX_10 58
+#define GPIOX_11 59
+#define GPIOX_12 60
+#define GPIOX_13 61
+#define GPIOX_14 62
+#define GPIOX_15 63
+#define GPIOX_16 64
+#define GPIOX_17 65
+#define GPIOX_18 66
+#define GPIOX_19 67
+
+#define GPIOZ_0 68
+#define GPIOZ_1 69
+#define GPIOZ_2 70
+#define GPIOZ_3 71
+#define GPIOZ_4 72
+#define GPIOZ_5 73
+#define GPIOZ_6 74
+#define GPIOZ_7 75
+#define GPIOZ_8 76
+#define GPIOZ_9 77
+#define GPIOZ_10 78
+#define GPIOZ_11 79
+#define GPIOZ_12 80
+
+#define GPIO_TEST_N 81
+#endif /* _DT_BINDINGS_MESON_S4_GPIO_H */
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4
@ 2021-12-14 2:20 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:20 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio, devicetree
Add a new dt-binding header file which documents the detail pin names.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++++++++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
diff --git a/include/dt-bindings/gpio/meson-s4-gpio.h b/include/dt-bindings/gpio/meson-s4-gpio.h
new file mode 100644
index 000000000000..35aee21b94f1
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-s4-gpio.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_S4_GPIO_H
+#define _DT_BINDINGS_MESON_S4_GPIO_H
+
+#define GPIOB_0 0
+#define GPIOB_1 1
+#define GPIOB_2 2
+#define GPIOB_3 3
+#define GPIOB_4 4
+#define GPIOB_5 5
+#define GPIOB_6 6
+#define GPIOB_7 7
+#define GPIOB_8 8
+#define GPIOB_9 9
+#define GPIOB_10 10
+#define GPIOB_11 11
+#define GPIOB_12 12
+#define GPIOB_13 13
+
+#define GPIOC_0 14
+#define GPIOC_1 15
+#define GPIOC_2 16
+#define GPIOC_3 17
+#define GPIOC_4 18
+#define GPIOC_5 19
+#define GPIOC_6 20
+#define GPIOC_7 21
+
+#define GPIOE_0 22
+#define GPIOE_1 23
+
+#define GPIOD_0 24
+#define GPIOD_1 25
+#define GPIOD_2 26
+#define GPIOD_3 27
+#define GPIOD_4 28
+#define GPIOD_5 29
+#define GPIOD_6 30
+#define GPIOD_7 31
+#define GPIOD_8 32
+#define GPIOD_9 33
+#define GPIOD_10 34
+#define GPIOD_11 35
+
+#define GPIOH_0 36
+#define GPIOH_1 37
+#define GPIOH_2 38
+#define GPIOH_3 39
+#define GPIOH_4 40
+#define GPIOH_5 41
+#define GPIOH_6 42
+#define GPIOH_7 43
+#define GPIOH_8 44
+#define GPIOH_9 45
+#define GPIOH_10 46
+#define GPIOH_11 47
+
+#define GPIOX_0 48
+#define GPIOX_1 49
+#define GPIOX_2 50
+#define GPIOX_3 51
+#define GPIOX_4 52
+#define GPIOX_5 53
+#define GPIOX_6 54
+#define GPIOX_7 55
+#define GPIOX_8 56
+#define GPIOX_9 57
+#define GPIOX_10 58
+#define GPIOX_11 59
+#define GPIOX_12 60
+#define GPIOX_13 61
+#define GPIOX_14 62
+#define GPIOX_15 63
+#define GPIOX_16 64
+#define GPIOX_17 65
+#define GPIOX_18 66
+#define GPIOX_19 67
+
+#define GPIOZ_0 68
+#define GPIOZ_1 69
+#define GPIOZ_2 70
+#define GPIOZ_3 71
+#define GPIOZ_4 72
+#define GPIOZ_5 73
+#define GPIOZ_6 74
+#define GPIOZ_7 75
+#define GPIOZ_8 76
+#define GPIOZ_9 77
+#define GPIOZ_10 78
+#define GPIOZ_11 79
+#define GPIOZ_12 80
+
+#define GPIO_TEST_N 81
+#endif /* _DT_BINDINGS_MESON_S4_GPIO_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
2021-12-14 2:20 ` Qianggui Song
(?)
@ 2021-12-14 2:21 ` Qianggui Song
-1 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:21 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio
Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
same register laytout as the previous Meson-A1.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
drivers/pinctrl/meson/Kconfig | 6 +
drivers/pinctrl/meson/Makefile | 1 +
drivers/pinctrl/meson/pinctrl-meson-s4.c | 1229 ++++++++++++++++++++++
3 files changed, 1236 insertions(+)
create mode 100644 drivers/pinctrl/meson/pinctrl-meson-s4.c
diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig
index b2855e341a75..d1955c65b4b6 100644
--- a/drivers/pinctrl/meson/Kconfig
+++ b/drivers/pinctrl/meson/Kconfig
@@ -61,4 +61,10 @@ config PINCTRL_MESON_A1
select PINCTRL_MESON_AXG_PMX
default y
+config PINCTRL_MESON_S4
+ tristate "Meson s4 Soc pinctrl driver"
+ depends on ARM64
+ select PINCTRL_MESON_AXG_PMX
+ default y
+
endif
diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
index 1a5bffe953f9..694f0596bfbc 100644
--- a/drivers/pinctrl/meson/Makefile
+++ b/drivers/pinctrl/meson/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_MESON_AXG_PMX) += pinctrl-meson-axg-pmx.o
obj-$(CONFIG_PINCTRL_MESON_AXG) += pinctrl-meson-axg.o
obj-$(CONFIG_PINCTRL_MESON_G12A) += pinctrl-meson-g12a.o
obj-$(CONFIG_PINCTRL_MESON_A1) += pinctrl-meson-a1.o
+obj-$(CONFIG_PINCTRL_MESON_S4) += pinctrl-meson-s4.o
diff --git a/drivers/pinctrl/meson/pinctrl-meson-s4.c b/drivers/pinctrl/meson/pinctrl-meson-s4.c
new file mode 100644
index 000000000000..be26ac17847a
--- /dev/null
+++ b/drivers/pinctrl/meson/pinctrl-meson-s4.c
@@ -0,0 +1,1229 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Pin controller and GPIO driver for Amlogic Meson S4 SoC.
+ *
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song@amlogic.com>
+ */
+
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include "pinctrl-meson.h"
+#include "pinctrl-meson-axg-pmx.h"
+
+static const struct pinctrl_pin_desc meson_s4_periphs_pins[] = {
+ MESON_PIN(GPIOE_0),
+ MESON_PIN(GPIOE_1),
+
+ MESON_PIN(GPIOB_0),
+ MESON_PIN(GPIOB_1),
+ MESON_PIN(GPIOB_2),
+ MESON_PIN(GPIOB_3),
+ MESON_PIN(GPIOB_4),
+ MESON_PIN(GPIOB_5),
+ MESON_PIN(GPIOB_6),
+ MESON_PIN(GPIOB_7),
+ MESON_PIN(GPIOB_8),
+ MESON_PIN(GPIOB_9),
+ MESON_PIN(GPIOB_10),
+ MESON_PIN(GPIOB_11),
+ MESON_PIN(GPIOB_12),
+ MESON_PIN(GPIOB_13),
+
+ MESON_PIN(GPIOC_0),
+ MESON_PIN(GPIOC_1),
+ MESON_PIN(GPIOC_2),
+ MESON_PIN(GPIOC_3),
+ MESON_PIN(GPIOC_4),
+ MESON_PIN(GPIOC_5),
+ MESON_PIN(GPIOC_6),
+ MESON_PIN(GPIOC_7),
+
+ MESON_PIN(GPIOD_0),
+ MESON_PIN(GPIOD_1),
+ MESON_PIN(GPIOD_2),
+ MESON_PIN(GPIOD_3),
+ MESON_PIN(GPIOD_4),
+ MESON_PIN(GPIOD_5),
+ MESON_PIN(GPIOD_6),
+ MESON_PIN(GPIOD_7),
+ MESON_PIN(GPIOD_8),
+ MESON_PIN(GPIOD_9),
+ MESON_PIN(GPIOD_10),
+ MESON_PIN(GPIOD_11),
+
+ MESON_PIN(GPIOH_0),
+ MESON_PIN(GPIOH_1),
+ MESON_PIN(GPIOH_2),
+ MESON_PIN(GPIOH_3),
+ MESON_PIN(GPIOH_4),
+ MESON_PIN(GPIOH_5),
+ MESON_PIN(GPIOH_6),
+ MESON_PIN(GPIOH_7),
+ MESON_PIN(GPIOH_8),
+ MESON_PIN(GPIOH_9),
+ MESON_PIN(GPIOH_10),
+ MESON_PIN(GPIOH_11),
+
+ MESON_PIN(GPIOX_0),
+ MESON_PIN(GPIOX_1),
+ MESON_PIN(GPIOX_2),
+ MESON_PIN(GPIOX_3),
+ MESON_PIN(GPIOX_4),
+ MESON_PIN(GPIOX_5),
+ MESON_PIN(GPIOX_6),
+ MESON_PIN(GPIOX_7),
+ MESON_PIN(GPIOX_8),
+ MESON_PIN(GPIOX_9),
+ MESON_PIN(GPIOX_10),
+ MESON_PIN(GPIOX_11),
+ MESON_PIN(GPIOX_12),
+ MESON_PIN(GPIOX_13),
+ MESON_PIN(GPIOX_14),
+ MESON_PIN(GPIOX_15),
+ MESON_PIN(GPIOX_16),
+ MESON_PIN(GPIOX_17),
+ MESON_PIN(GPIOX_18),
+ MESON_PIN(GPIOX_19),
+
+ MESON_PIN(GPIOZ_0),
+ MESON_PIN(GPIOZ_1),
+ MESON_PIN(GPIOZ_2),
+ MESON_PIN(GPIOZ_3),
+ MESON_PIN(GPIOZ_4),
+ MESON_PIN(GPIOZ_5),
+ MESON_PIN(GPIOZ_6),
+ MESON_PIN(GPIOZ_7),
+ MESON_PIN(GPIOZ_8),
+ MESON_PIN(GPIOZ_9),
+ MESON_PIN(GPIOZ_10),
+ MESON_PIN(GPIOZ_11),
+ MESON_PIN(GPIOZ_12),
+
+ MESON_PIN(GPIO_TEST_N)
+};
+
+/* BANK E func1 */
+static const unsigned int i2c0_sda_pins[] = { GPIOE_0 };
+static const unsigned int i2c0_scl_pins[] = { GPIOE_1 };
+
+/* BANK E func2 */
+static const unsigned int uart_b_tx_e_pins[] = { GPIOE_0 };
+static const unsigned int uart_b_rx_e_pins[] = { GPIOE_1 };
+
+/* BANK E func3 */
+static const unsigned int pwm_h_pins[] = { GPIOE_0 };
+static const unsigned int pwm_j_pins[] = { GPIOE_1 };
+
+/* BANK B func1 */
+static const unsigned int emmc_nand_d0_pins[] = { GPIOB_0 };
+static const unsigned int emmc_nand_d1_pins[] = { GPIOB_1 };
+static const unsigned int emmc_nand_d2_pins[] = { GPIOB_2 };
+static const unsigned int emmc_nand_d3_pins[] = { GPIOB_3 };
+static const unsigned int emmc_nand_d4_pins[] = { GPIOB_4 };
+static const unsigned int emmc_nand_d5_pins[] = { GPIOB_5 };
+static const unsigned int emmc_nand_d6_pins[] = { GPIOB_6 };
+static const unsigned int emmc_nand_d7_pins[] = { GPIOB_7 };
+static const unsigned int emmc_clk_pins[] = { GPIOB_8 };
+static const unsigned int emmc_rst_pins[] = { GPIOB_9 };
+static const unsigned int emmc_cmd_pins[] = { GPIOB_10 };
+static const unsigned int emmc_nand_ds_pins[] = { GPIOB_11 };
+
+/* Bank B func2 */
+static const unsigned int nand_wen_clk_pins[] = { GPIOB_8 };
+static const unsigned int nand_ale_pins[] = { GPIOB_9 };
+static const unsigned int nand_ren_wr_pins[] = { GPIOB_10 };
+static const unsigned int nand_cle_pins[] = { GPIOB_11 };
+static const unsigned int nand_ce0_pins[] = { GPIOB_12 };
+
+/* Bank B func3 */
+static const unsigned int spif_hold_pins[] = { GPIOB_3 };
+static const unsigned int spif_mo_pins[] = { GPIOB_4 };
+static const unsigned int spif_mi_pins[] = { GPIOB_5 };
+static const unsigned int spif_clk_pins[] = { GPIOB_6 };
+static const unsigned int spif_wp_pins[] = { GPIOB_7 };
+static const unsigned int spif_cs_pins[] = { GPIOB_13 };
+
+/* Bank C func1 */
+static const unsigned int sdcard_d0_c_pins[] = { GPIOC_0 };
+static const unsigned int sdcard_d1_c_pins[] = { GPIOC_1 };
+static const unsigned int sdcard_d2_c_pins[] = { GPIOC_2 };
+static const unsigned int sdcard_d3_c_pins[] = { GPIOC_3 };
+static const unsigned int sdcard_clk_c_pins[] = { GPIOC_4 };
+static const unsigned int sdcard_cmd_c_pins[] = { GPIOC_5 };
+static const unsigned int sdcard_cd_pins[] = { GPIOC_6 };
+
+/* Bank C func2 */
+static const unsigned int jtag_2_tdo_pins[] = { GPIOC_0 };
+static const unsigned int jtag_2_tdi_pins[] = { GPIOC_1 };
+static const unsigned int uart_b_rx_c_pins[] = { GPIOC_2 };
+static const unsigned int uart_b_tx_c_pins[] = { GPIOC_3 };
+static const unsigned int jtag_2_clk_pins[] = { GPIOC_4 };
+static const unsigned int jtag_2_tms_pins[] = { GPIOC_5 };
+static const unsigned int i2c1_sda_c_pins[] = { GPIOC_6 };
+static const unsigned int i2c1_scl_c_pins[] = { GPIOC_7 };
+
+/* Bank C func3 */
+static const unsigned int pdm_din1_c_pins[] = { GPIOC_0 };
+static const unsigned int pdm_din0_c_pins[] = { GPIOC_1 };
+static const unsigned int i2c4_sda_c_pins[] = { GPIOC_2 };
+static const unsigned int i2c4_scl_c_pins[] = { GPIOC_3 };
+static const unsigned int pdm_dclk_c_pins[] = { GPIOC_4 };
+static const unsigned int iso7816_clk_c_pins[] = { GPIOC_5 };
+static const unsigned int iso7816_data_c_pins[] = { GPIOC_6 };
+
+/* Bank C func4 */
+static const unsigned int tdm_d2_c_pins[] = { GPIOC_0 };
+static const unsigned int tdm_d3_c_pins[] = { GPIOC_1 };
+static const unsigned int tdm_fs1_c_pins[] = { GPIOC_2 };
+static const unsigned int tdm_sclk1_c_pins[] = { GPIOC_3 };
+static const unsigned int mclk_1_c_pins[] = { GPIOC_4 };
+static const unsigned int tdm_d4_c_pins[] = { GPIOC_5 };
+static const unsigned int tdm_d5_c_pins[] = { GPIOC_6 };
+
+/* Bank D func1 */
+static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
+static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
+static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
+static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
+static const unsigned int remote_out_pins[] = { GPIOD_4 };
+static const unsigned int remote_in_pins[] = { GPIOD_5 };
+static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
+static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
+static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
+static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
+static const unsigned int clk12_24_pins[] = { GPIOD_10 };
+static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
+
+/* Bank D func2 */
+static const unsigned int i2c4_sda_d_pins[] = { GPIOD_2 };
+static const unsigned int i2c4_scl_d_pins[] = { GPIOD_3 };
+static const unsigned int mclk_1_d_pins[] = { GPIOD_4 };
+static const unsigned int tdm_sclk1_d_pins[] = { GPIOD_6 };
+static const unsigned int tdm_fs1_d_pins[] = { GPIOD_7 };
+static const unsigned int tdm_d4_d_pins[] = { GPIOD_8 };
+static const unsigned int tdm_d3_d_pins[] = { GPIOD_9 };
+static const unsigned int tdm_d2_d_pins[] = { GPIOD_10 };
+static const unsigned int pwm_g_d_pins[] = { GPIOD_11 };
+
+/* Bank D func3 */
+static const unsigned int uart_c_tx_pins[] = { GPIOD_2 };
+static const unsigned int uart_c_rx_pins[] = { GPIOD_3 };
+static const unsigned int pwm_b_d_pins[] = { GPIOD_4 };
+static const unsigned int pwm_a_d_pins[] = { GPIOD_6 };
+static const unsigned int pwm_c_d_pins[] = { GPIOD_7 };
+static const unsigned int pwm_d_d_pins[] = { GPIOD_8 };
+static const unsigned int pwm_i_d_pins[] = { GPIOD_9 };
+
+/* Bank D func4 */
+static const unsigned int clk_32k_in_pins[] = { GPIOD_2 };
+static const unsigned int pwm_b_hiz_pins[] = { GPIOD_4 };
+static const unsigned int pwm_a_hiz_pins[] = { GPIOD_6 };
+static const unsigned int pwm_c_hiz_pins[] = { GPIOD_7 };
+static const unsigned int pdm_dclk_d_pins[] = { GPIOD_8 };
+static const unsigned int pdm_din0_d_pins[] = { GPIOD_9 };
+static const unsigned int pdm_din1_d_pins[] = { GPIOD_10 };
+
+/* Bank D func5 */
+static const unsigned int mic_mute_en_pins[] = { GPIOD_2 };
+static const unsigned int mic_mute_key_pins[] = { GPIOD_3 };
+static const unsigned int i2c1_sda_d_pins[] = { GPIOD_6 };
+static const unsigned int i2c1_scl_d_pins[] = { GPIOD_7 };
+static const unsigned int i2c2_sda_d_pins[] = { GPIOD_10 };
+static const unsigned int i2c2_scl_d_pins[] = { GPIOD_11 };
+
+/* Bank D func6 */
+static const unsigned int gen_clk_d_pins[] = { GPIOD_10 };
+static const unsigned int tsin_b_clk_c_pins[] = { GPIOD_6 };
+static const unsigned int tsin_b_sop_c_pins[] = { GPIOD_7 };
+static const unsigned int tsin_b_valid_c_pins[] = { GPIOD_8 };
+static const unsigned int tsin_b_d0_c_pins[] = { GPIOD_9 };
+
+/* Bank H func1 */
+static const unsigned int hdmitx_sda_pins[] = { GPIOH_0 };
+static const unsigned int hdmitx_sck_pins[] = { GPIOH_1 };
+static const unsigned int hdmitx_hpd_in_pins[] = { GPIOH_2 };
+static const unsigned int ao_cec_a_pins[] = { GPIOH_3 };
+static const unsigned int spdif_out_h_pins[] = { GPIOH_4 };
+static const unsigned int spdif_in_pins[] = { GPIOH_5 };
+static const unsigned int i2c1_sda_h_pins[] = { GPIOH_6 };
+static const unsigned int i2c1_scl_h_pins[] = { GPIOH_7 };
+static const unsigned int i2c2_sda_h8_pins[] = { GPIOH_8 };
+static const unsigned int i2c2_scl_h9_pins[] = { GPIOH_9 };
+static const unsigned int eth_link_led_pins[] = { GPIOH_10 };
+static const unsigned int eth_act_led_pins[] = { GPIOH_11 };
+
+/* Bank H func2 */
+static const unsigned int i2c2_sda_h0_pins[] = { GPIOH_0 };
+static const unsigned int i2c2_scl_h1_pins[] = { GPIOH_1 };
+static const unsigned int ao_cec_b_pins[] = { GPIOH_3 };
+static const unsigned int uart_d_tx_h_pins[] = { GPIOH_4 };
+static const unsigned int uart_d_rx_h_pins[] = { GPIOH_5 };
+static const unsigned int uart_d_cts_h_pins[] = { GPIOH_6 };
+static const unsigned int uart_d_rts_h_pins[] = { GPIOH_7 };
+static const unsigned int iso7816_clk_h_pins[] = { GPIOH_8 };
+static const unsigned int iso7816_data_h_pins[] = { GPIOH_9 };
+static const unsigned int uart_e_tx_h_pins[] = { GPIOH_10 };
+static const unsigned int uart_e_rx_h_pins[] = { GPIOH_11 };
+
+/* Bank H func3 */
+static const unsigned int pwm_d_h_pins[] = { GPIOH_6 };
+static const unsigned int pwm_i_h_pins[] = { GPIOH_7 };
+static const unsigned int pdm_dclk_h_pins[] = { GPIOH_8 };
+static const unsigned int pdm_din0_h_pins[] = { GPIOH_9 };
+static const unsigned int pdm_din1_h_pins[] = { GPIOH_10 };
+
+/* Bank H func4 */
+static const unsigned int mclk_1_h_pins[] = { GPIOH_4 };
+static const unsigned int tdm_sclk1_h_pins[] = { GPIOH_5 };
+static const unsigned int tdm_fs1_h_pins[] = { GPIOH_6 };
+static const unsigned int tdm_d2_h_pins[] = { GPIOH_7 };
+static const unsigned int tdm_d3_h_pins[] = { GPIOH_8 };
+static const unsigned int tdm_d4_h_pins[] = { GPIOH_9 };
+
+/* Bank H func5 */
+static const unsigned int spi_a_miso_h_pins[] = { GPIOH_4 };
+static const unsigned int spi_a_mosi_h_pins[] = { GPIOH_5 };
+static const unsigned int spi_a_clk_h_pins[] = { GPIOH_6 };
+static const unsigned int spi_a_ss0_h_pins[] = { GPIOH_7 };
+
+/* Bank H func6 */
+static const unsigned int gen_clk_h_pins[] = { GPIOH_11 };
+static const unsigned int tsin_b1_clk_pins[] = { GPIOH_4 };
+static const unsigned int tsin_b1_sop_pins[] = { GPIOH_5 };
+static const unsigned int tsin_b1_valid_pins[] = { GPIOH_6 };
+static const unsigned int tsin_b1_d0_pins[] = { GPIOH_7 };
+
+/* Bank X func1 */
+static const unsigned int sdio_d0_pins[] = { GPIOX_0 };
+static const unsigned int sdio_d1_pins[] = { GPIOX_1 };
+static const unsigned int sdio_d2_pins[] = { GPIOX_2 };
+static const unsigned int sdio_d3_pins[] = { GPIOX_3 };
+static const unsigned int sdio_clk_pins[] = { GPIOX_4 };
+static const unsigned int sdio_cmd_pins[] = { GPIOX_5 };
+static const unsigned int pwm_a_x_pins[] = { GPIOX_6 };
+static const unsigned int pwm_f_x_pins[] = { GPIOX_7 };
+static const unsigned int tdm_d1_pins[] = { GPIOX_8 };
+static const unsigned int tdm_d0_pins[] = { GPIOX_9 };
+static const unsigned int tdm_fs0_pins[] = { GPIOX_10 };
+static const unsigned int tdm_sclk0_pins[] = { GPIOX_11 };
+static const unsigned int uart_a_tx_pins[] = { GPIOX_12 };
+static const unsigned int uart_a_rx_pins[] = { GPIOX_13 };
+static const unsigned int uart_a_cts_pins[] = { GPIOX_14 };
+static const unsigned int uart_a_rts_pins[] = { GPIOX_15 };
+static const unsigned int pwm_e_x_pins[] = { GPIOX_16 };
+static const unsigned int i2c1_sda_x_pins[] = { GPIOX_17 };
+static const unsigned int i2c1_scl_x_pins[] = { GPIOX_18 };
+static const unsigned int pwm_b_x_pins[] = { GPIOX_19 };
+
+/* Bank X func2 */
+static const unsigned int pdm_din0_x_pins[] = { GPIOX_8 };
+static const unsigned int pdm_din1_x_pins[] = { GPIOX_9 };
+static const unsigned int pdm_dclk_x_pins[] = { GPIOX_11 };
+
+/* Bank X func3 */
+static const unsigned int spi_a_mosi_x_pins[] = { GPIOX_8 };
+static const unsigned int spi_a_miso_x_pins[] = { GPIOX_9 };
+static const unsigned int spi_a_ss0_x_pins[] = { GPIOX_10 };
+static const unsigned int spi_a_clk_x_pins[] = { GPIOX_11 };
+
+/* Bank X func4 */
+static const unsigned int pwm_c_x_pins[] = { GPIOX_8 };
+static const unsigned int i2c_slave_scl_pins[] = { GPIOX_10 };
+static const unsigned int i2c_slave_sda_pins[] = { GPIOX_11 };
+
+/* Bank X func5 */
+static const unsigned int i2c3_sda_x_pins[] = { GPIOX_10 };
+static const unsigned int i2c3_scl_x_pins[] = { GPIOX_11 };
+
+/* Bank Z func1 */
+static const unsigned int tdm_fs2_pins[] = { GPIOZ_0 };
+static const unsigned int tdm_sclk2_pins[] = { GPIOZ_1 };
+static const unsigned int tdm_d4_z_pins[] = { GPIOZ_2 };
+static const unsigned int tdm_d5_z_pins[] = { GPIOZ_3 };
+static const unsigned int tdm_d6_pins[] = { GPIOZ_4 };
+static const unsigned int tdm_d7_pins[] = { GPIOZ_5 };
+static const unsigned int mclk_2_pins[] = { GPIOZ_6 };
+static const unsigned int spdif_out_z_pins[] = { GPIOZ_9 };
+static const unsigned int dtv_a_if_agc_z10_pins[] = { GPIOZ_10 };
+static const unsigned int uart_e_tx_z11_pins[] = { GPIOZ_11 };
+static const unsigned int uart_e_rx_z12_pins[] = { GPIOZ_12 };
+
+/* Bank Z func2 */
+static const unsigned int tsin_a_clk_pins[] = { GPIOZ_0 };
+static const unsigned int tsin_a_sop_pins[] = { GPIOZ_1 };
+static const unsigned int tsin_a_valid_pins[] = { GPIOZ_2 };
+static const unsigned int tsin_a_din0_pins[] = { GPIOZ_3 };
+static const unsigned int dtv_a_if_agc_z6_pins[] = { GPIOZ_6 };
+static const unsigned int dtv_b_if_agc_pins[] = { GPIOZ_7 };
+static const unsigned int i2c3_sda_z_pins[] = { GPIOZ_8 };
+static const unsigned int i2c3_scl_z_pins[] = { GPIOZ_9 };
+static const unsigned int dtv_a_rf_agc_pins[] = { GPIOZ_10 };
+static const unsigned int dtv_b_rf_agc_pins[] = { GPIOZ_11 };
+
+/* Bank Z func3 */
+static const unsigned int sdcard_d0_z_pins[] = { GPIOZ_0 };
+static const unsigned int sdcard_d1_z_pins[] = { GPIOZ_1 };
+static const unsigned int sdcard_d2_z_pins[] = { GPIOZ_2 };
+static const unsigned int sdcard_d3_z_pins[] = { GPIOZ_3 };
+static const unsigned int sdcard_clk_z_pins[] = { GPIOZ_4 };
+static const unsigned int sdcard_cmd_z_pins[] = { GPIOZ_5 };
+static const unsigned int uart_e_tx_z8_pins[] = { GPIOZ_8 };
+static const unsigned int uart_e_rx_z9_pins[] = { GPIOZ_9 };
+static const unsigned int pdm_din1_z_pins[] = { GPIOZ_10 };
+static const unsigned int pdm_din0_z_pins[] = { GPIOZ_11 };
+static const unsigned int pdm_dclk_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func4 */
+static const unsigned int spi_a_miso_z_pins[] = { GPIOZ_0 };
+static const unsigned int spi_a_mosi_z_pins[] = { GPIOZ_1 };
+static const unsigned int spi_a_clk_z_pins[] = { GPIOZ_2 };
+static const unsigned int spi_a_ss0_z_pins[] = { GPIOZ_3 };
+static const unsigned int spi_a_ss1_z_pins[] = { GPIOZ_4 };
+static const unsigned int spi_a_ss2_z_pins[] = { GPIOZ_5 };
+static const unsigned int i2c4_scl_z_pins[] = { GPIOZ_11 };
+static const unsigned int i2c4_sda_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func5 */
+static const unsigned int uart_d_tx_z_pins[] = { GPIOZ_0 };
+static const unsigned int uart_d_rx_z_pins[] = { GPIOZ_1 };
+static const unsigned int uart_d_cts_z_pins[] = { GPIOZ_2 };
+static const unsigned int uart_d_rts_z_pins[] = { GPIOZ_3 };
+static const unsigned int pwm_g_z_pins[] = { GPIOZ_4 };
+static const unsigned int pwm_f_z_pins[] = { GPIOZ_5 };
+static const unsigned int pwm_e_z_pins[] = { GPIOZ_6 };
+static const unsigned int tsin_b_clk_z_pins[] = { GPIOZ_7 };
+static const unsigned int tsin_b_sop_z_pins[] = { GPIOZ_10 };
+static const unsigned int tsin_b_valid_z_pins[] = { GPIOZ_11 };
+static const unsigned int tsin_b_d0_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func6 */
+static const unsigned int s2_demod_gpio7_pins[] = { GPIOZ_0 };
+static const unsigned int s2_demod_gpio6_pins[] = { GPIOZ_1 };
+static const unsigned int s2_demod_gpio5_pins[] = { GPIOZ_2 };
+static const unsigned int s2_demod_gpio4_pins[] = { GPIOZ_3 };
+static const unsigned int s2_demod_gpio3_pins[] = { GPIOZ_4 };
+static const unsigned int s2_demod_gpio2_pins[] = { GPIOZ_5 };
+static const unsigned int diseqc_out_pins[] = { GPIOZ_7 };
+static const unsigned int s2_demod_gpio1_pins[] = { GPIOZ_8 };
+static const unsigned int s2_demod_gpio0_pins[] = { GPIOZ_12 };
+
+/* Bank Z func7 */
+static const unsigned int gen_clk_z9_pins[] = { GPIOZ_9 };
+static const unsigned int gen_clk_z12_pins[] = { GPIOZ_12 };
+
+static struct meson_pmx_group meson_s4_periphs_groups[] = {
+ GPIO_GROUP(GPIOE_0),
+ GPIO_GROUP(GPIOE_1),
+
+ GPIO_GROUP(GPIOB_0),
+ GPIO_GROUP(GPIOB_1),
+ GPIO_GROUP(GPIOB_2),
+ GPIO_GROUP(GPIOB_3),
+ GPIO_GROUP(GPIOB_4),
+ GPIO_GROUP(GPIOB_5),
+ GPIO_GROUP(GPIOB_6),
+ GPIO_GROUP(GPIOB_7),
+ GPIO_GROUP(GPIOB_8),
+ GPIO_GROUP(GPIOB_9),
+ GPIO_GROUP(GPIOB_10),
+ GPIO_GROUP(GPIOB_11),
+ GPIO_GROUP(GPIOB_12),
+ GPIO_GROUP(GPIOB_13),
+
+ GPIO_GROUP(GPIOC_0),
+ GPIO_GROUP(GPIOC_1),
+ GPIO_GROUP(GPIOC_2),
+ GPIO_GROUP(GPIOC_3),
+ GPIO_GROUP(GPIOC_4),
+ GPIO_GROUP(GPIOC_5),
+ GPIO_GROUP(GPIOC_6),
+ GPIO_GROUP(GPIOC_7),
+
+ GPIO_GROUP(GPIOD_0),
+ GPIO_GROUP(GPIOD_1),
+ GPIO_GROUP(GPIOD_2),
+ GPIO_GROUP(GPIOD_3),
+ GPIO_GROUP(GPIOD_4),
+ GPIO_GROUP(GPIOD_5),
+ GPIO_GROUP(GPIOD_6),
+ GPIO_GROUP(GPIOD_7),
+ GPIO_GROUP(GPIOD_8),
+ GPIO_GROUP(GPIOD_9),
+ GPIO_GROUP(GPIOD_10),
+ GPIO_GROUP(GPIOD_11),
+
+ GPIO_GROUP(GPIOH_0),
+ GPIO_GROUP(GPIOH_1),
+ GPIO_GROUP(GPIOH_2),
+ GPIO_GROUP(GPIOH_3),
+ GPIO_GROUP(GPIOH_4),
+ GPIO_GROUP(GPIOH_5),
+ GPIO_GROUP(GPIOH_6),
+ GPIO_GROUP(GPIOH_7),
+ GPIO_GROUP(GPIOH_8),
+ GPIO_GROUP(GPIOH_9),
+ GPIO_GROUP(GPIOH_10),
+ GPIO_GROUP(GPIOH_11),
+
+ GPIO_GROUP(GPIOX_0),
+ GPIO_GROUP(GPIOX_1),
+ GPIO_GROUP(GPIOX_2),
+ GPIO_GROUP(GPIOX_3),
+ GPIO_GROUP(GPIOX_4),
+ GPIO_GROUP(GPIOX_5),
+ GPIO_GROUP(GPIOX_6),
+ GPIO_GROUP(GPIOX_7),
+ GPIO_GROUP(GPIOX_8),
+ GPIO_GROUP(GPIOX_9),
+ GPIO_GROUP(GPIOX_10),
+ GPIO_GROUP(GPIOX_11),
+ GPIO_GROUP(GPIOX_12),
+ GPIO_GROUP(GPIOX_13),
+ GPIO_GROUP(GPIOX_14),
+ GPIO_GROUP(GPIOX_15),
+ GPIO_GROUP(GPIOX_16),
+ GPIO_GROUP(GPIOX_17),
+ GPIO_GROUP(GPIOX_18),
+ GPIO_GROUP(GPIOX_19),
+
+ GPIO_GROUP(GPIOZ_0),
+ GPIO_GROUP(GPIOZ_1),
+ GPIO_GROUP(GPIOZ_2),
+ GPIO_GROUP(GPIOZ_3),
+ GPIO_GROUP(GPIOZ_4),
+ GPIO_GROUP(GPIOZ_5),
+ GPIO_GROUP(GPIOZ_6),
+ GPIO_GROUP(GPIOZ_7),
+ GPIO_GROUP(GPIOZ_8),
+ GPIO_GROUP(GPIOZ_9),
+ GPIO_GROUP(GPIOZ_10),
+ GPIO_GROUP(GPIOZ_11),
+ GPIO_GROUP(GPIOZ_12),
+
+ GPIO_GROUP(GPIO_TEST_N),
+
+ /* BANK E func1 */
+ GROUP(i2c0_sda, 1),
+ GROUP(i2c0_scl, 1),
+
+ /* BANK E func2 */
+ GROUP(uart_b_tx_e, 2),
+ GROUP(uart_b_rx_e, 2),
+
+ /* BANK E func3 */
+ GROUP(pwm_h, 3),
+ GROUP(pwm_j, 3),
+
+ /* BANK B func1 */
+ GROUP(emmc_nand_d0, 1),
+ GROUP(emmc_nand_d1, 1),
+ GROUP(emmc_nand_d2, 1),
+ GROUP(emmc_nand_d3, 1),
+ GROUP(emmc_nand_d4, 1),
+ GROUP(emmc_nand_d5, 1),
+ GROUP(emmc_nand_d6, 1),
+ GROUP(emmc_nand_d7, 1),
+ GROUP(emmc_clk, 1),
+ GROUP(emmc_rst, 1),
+ GROUP(emmc_cmd, 1),
+ GROUP(emmc_nand_ds, 1),
+
+ /* Bank B func2 */
+ GROUP(nand_wen_clk, 2),
+ GROUP(nand_ale, 2),
+ GROUP(nand_ren_wr, 2),
+ GROUP(nand_cle, 2),
+ GROUP(nand_ce0, 2),
+
+ /* Bank B func3 */
+ GROUP(spif_hold, 3),
+ GROUP(spif_mo, 3),
+ GROUP(spif_mi, 3),
+ GROUP(spif_clk, 3),
+ GROUP(spif_wp, 3),
+ GROUP(spif_cs, 3),
+
+ /* Bank C func1 */
+ GROUP(sdcard_d0_c, 1),
+ GROUP(sdcard_d1_c, 1),
+ GROUP(sdcard_d2_c, 1),
+ GROUP(sdcard_d3_c, 1),
+ GROUP(sdcard_clk_c, 1),
+ GROUP(sdcard_cmd_c, 1),
+ GROUP(sdcard_cd, 1),
+
+ /* Bank C func2 */
+ GROUP(jtag_2_tdo, 2),
+ GROUP(jtag_2_tdi, 2),
+ GROUP(uart_b_rx_c, 2),
+ GROUP(uart_b_tx_c, 2),
+ GROUP(jtag_2_clk, 2),
+ GROUP(jtag_2_tms, 2),
+ GROUP(i2c1_sda_c, 2),
+ GROUP(i2c1_scl_c, 2),
+
+ /* Bank C func3 */
+ GROUP(pdm_din1_c, 3),
+ GROUP(pdm_din0_c, 3),
+ GROUP(i2c4_sda_c, 3),
+ GROUP(i2c4_scl_c, 3),
+ GROUP(pdm_dclk_c, 3),
+ GROUP(iso7816_clk_c, 3),
+ GROUP(iso7816_data_c, 3),
+
+ /* Bank C func4 */
+ GROUP(tdm_d2_c, 4),
+ GROUP(tdm_d3_c, 4),
+ GROUP(tdm_fs1_c, 4),
+ GROUP(mclk_1_c, 4),
+ GROUP(tdm_d4_c, 4),
+ GROUP(tdm_d5_c, 4),
+
+ /* Bank D func1 */
+ GROUP(uart_b_tx_d, 1),
+ GROUP(uart_b_rx_d, 1),
+ GROUP(uart_b_cts_d, 1),
+ GROUP(uart_b_rts_d, 1),
+ GROUP(remote_out, 1),
+ GROUP(remote_in, 1),
+ GROUP(jtag_1_clk, 1),
+ GROUP(jtag_1_tms, 1),
+ GROUP(jtag_1_tdi, 1),
+ GROUP(jtag_1_tdo, 1),
+ GROUP(clk12_24, 1),
+ GROUP(pwm_g_hiz, 1),
+
+ /* Bank D func2 */
+ GROUP(i2c4_sda_d, 2),
+ GROUP(i2c4_scl_d, 2),
+ GROUP(mclk_1_d, 2),
+ GROUP(tdm_sclk1_d, 2),
+ GROUP(tdm_fs1_d, 2),
+ GROUP(tdm_d4_d, 2),
+ GROUP(tdm_d3_d, 2),
+ GROUP(tdm_d2_d, 2),
+ GROUP(pwm_g_d, 2),
+
+ /* Bank D func3 */
+ GROUP(uart_c_tx, 3),
+ GROUP(uart_c_rx, 3),
+ GROUP(pwm_b_d, 3),
+ GROUP(pwm_a_d, 3),
+ GROUP(pwm_c_d, 3),
+ GROUP(pwm_d_d, 3),
+ GROUP(pwm_i_d, 3),
+
+ /* Bank D func4 */
+ GROUP(clk_32k_in, 4),
+ GROUP(pwm_b_hiz, 4),
+ GROUP(pwm_a_hiz, 4),
+ GROUP(pwm_c_hiz, 4),
+ GROUP(pdm_dclk_d, 4),
+ GROUP(pdm_din0_d, 4),
+ GROUP(pdm_din1_d, 4),
+
+ /* Bank D func5 */
+ GROUP(mic_mute_en, 5),
+ GROUP(mic_mute_key, 5),
+ GROUP(i2c1_sda_d, 5),
+ GROUP(i2c1_scl_d, 5),
+ GROUP(i2c2_sda_d, 5),
+ GROUP(i2c2_scl_d, 5),
+
+ /* Bank D func6 */
+ GROUP(gen_clk_d, 6),
+ GROUP(tsin_b_clk_c, 6),
+ GROUP(tsin_b_sop_c, 6),
+ GROUP(tsin_b_valid_c, 6),
+ GROUP(tsin_b_d0_c, 6),
+
+ /* Bank H func1 */
+ GROUP(hdmitx_sda, 1),
+ GROUP(hdmitx_sck, 1),
+ GROUP(hdmitx_hpd_in, 1),
+ GROUP(ao_cec_a, 1),
+ GROUP(spdif_out_h, 1),
+ GROUP(spdif_in, 1),
+ GROUP(i2c1_sda_h, 1),
+ GROUP(i2c1_scl_h, 1),
+ GROUP(i2c2_sda_h8, 1),
+ GROUP(i2c2_scl_h9, 1),
+ GROUP(eth_link_led, 1),
+ GROUP(eth_act_led, 1),
+
+ /* Bank H func2 */
+ GROUP(i2c2_sda_h0, 2),
+ GROUP(i2c2_scl_h1, 2),
+ GROUP(ao_cec_b, 2),
+ GROUP(uart_d_tx_h, 2),
+ GROUP(uart_d_rx_h, 2),
+ GROUP(uart_d_cts_h, 2),
+ GROUP(uart_d_rts_h, 2),
+ GROUP(iso7816_clk_h, 2),
+ GROUP(iso7816_data_h, 2),
+ GROUP(uart_e_tx_h, 2),
+ GROUP(uart_e_rx_h, 2),
+
+ /* Bank H func3 */
+ GROUP(pwm_d_h, 3),
+ GROUP(pwm_i_h, 3),
+ GROUP(pdm_dclk_h, 3),
+ GROUP(pdm_din0_h, 3),
+ GROUP(pdm_din1_h, 3),
+
+ /* Bank H func4 */
+ GROUP(mclk_1_h, 4),
+ GROUP(tdm_sclk1_h, 4),
+ GROUP(tdm_fs1_h, 4),
+ GROUP(tdm_d2_h, 4),
+ GROUP(tdm_d3_h, 4),
+ GROUP(tdm_d4_h, 4),
+
+ /* Bank H func5 */
+ GROUP(spi_a_miso_h, 5),
+ GROUP(spi_a_mosi_h, 5),
+ GROUP(spi_a_clk_h, 5),
+ GROUP(spi_a_ss0_h, 5),
+
+ /* Bank H func6 */
+ GROUP(gen_clk_h, 6),
+ GROUP(tsin_b1_clk, 6),
+ GROUP(tsin_b1_sop, 6),
+ GROUP(tsin_b1_valid, 6),
+ GROUP(tsin_b1_d0, 6),
+
+ /* Bank X func1 */
+ GROUP(sdio_d0, 1),
+ GROUP(sdio_d1, 1),
+ GROUP(sdio_d2, 1),
+ GROUP(sdio_d3, 1),
+ GROUP(sdio_clk, 1),
+ GROUP(sdio_cmd, 1),
+ GROUP(pwm_a_x, 1),
+ GROUP(pwm_f_x, 1),
+ GROUP(tdm_d1, 1),
+ GROUP(tdm_d0, 1),
+ GROUP(tdm_fs0, 1),
+ GROUP(tdm_sclk0, 1),
+ GROUP(uart_a_tx, 1),
+ GROUP(uart_a_rx, 1),
+ GROUP(uart_a_cts, 1),
+ GROUP(uart_a_rts, 1),
+ GROUP(pwm_e_x, 1),
+ GROUP(i2c1_sda_x, 1),
+ GROUP(i2c1_scl_x, 1),
+ GROUP(pwm_b_x, 1),
+
+ /* Bank X func2 */
+ GROUP(pdm_din0_x, 2),
+ GROUP(pdm_din1_x, 2),
+ GROUP(pdm_dclk_x, 2),
+
+ /* Bank X func3 */
+ GROUP(spi_a_mosi_x, 3),
+ GROUP(spi_a_miso_x, 3),
+ GROUP(spi_a_ss0_x, 3),
+ GROUP(spi_a_clk_x, 3),
+
+ /* Bank X func4 */
+ GROUP(pwm_c_x, 4),
+ GROUP(i2c_slave_scl, 4),
+ GROUP(i2c_slave_sda, 4),
+
+ /* Bank X func5 */
+ GROUP(i2c3_sda_x, 5),
+ GROUP(i2c3_scl_x, 5),
+
+ /* Bank Z func1 */
+ GROUP(tdm_fs2, 1),
+ GROUP(tdm_sclk2, 1),
+ GROUP(tdm_d4_z, 1),
+ GROUP(tdm_d5_z, 1),
+ GROUP(tdm_d6, 1),
+ GROUP(tdm_d7, 1),
+ GROUP(mclk_2, 1),
+ GROUP(spdif_out_z, 1),
+ GROUP(dtv_a_if_agc_z10, 1),
+ GROUP(uart_e_tx_z11, 1),
+ GROUP(uart_e_rx_z12, 1),
+
+ /* Bank Z func2 */
+ GROUP(tsin_a_clk, 2),
+ GROUP(tsin_a_sop, 2),
+ GROUP(tsin_a_valid, 2),
+ GROUP(tsin_a_din0, 2),
+ GROUP(dtv_a_if_agc_z6, 2),
+ GROUP(dtv_b_if_agc, 2),
+ GROUP(i2c3_sda_z, 2),
+ GROUP(i2c3_scl_z, 2),
+ GROUP(dtv_a_rf_agc, 2),
+ GROUP(dtv_b_rf_agc, 2),
+
+ /* Bank Z func3 */
+ GROUP(sdcard_d0_z, 3),
+ GROUP(sdcard_d1_z, 3),
+ GROUP(sdcard_d2_z, 3),
+ GROUP(sdcard_d3_z, 3),
+ GROUP(sdcard_clk_z, 3),
+ GROUP(sdcard_cmd_z, 3),
+ GROUP(uart_e_tx_z8, 3),
+ GROUP(uart_e_rx_z9, 3),
+ GROUP(pdm_din1_z, 3),
+ GROUP(pdm_din0_z, 3),
+ GROUP(pdm_dclk_z, 3),
+
+ /* Bank Z func4 */
+ GROUP(spi_a_miso_z, 4),
+ GROUP(spi_a_mosi_z, 4),
+ GROUP(spi_a_clk_z, 4),
+ GROUP(spi_a_ss0_z, 4),
+ GROUP(spi_a_ss1_z, 4),
+ GROUP(spi_a_ss2_z, 4),
+ GROUP(i2c4_scl_z, 4),
+ GROUP(i2c4_sda_z, 4),
+
+ /* Bank Z func5 */
+ GROUP(uart_d_tx_z, 5),
+ GROUP(uart_d_rx_z, 5),
+ GROUP(uart_d_cts_z, 5),
+ GROUP(uart_d_rts_z, 5),
+ GROUP(pwm_g_z, 5),
+ GROUP(pwm_f_z, 5),
+ GROUP(pwm_e_z, 5),
+ GROUP(tsin_b_clk_z, 5),
+ GROUP(tsin_b_sop_z, 5),
+ GROUP(tsin_b_valid_z, 5),
+ GROUP(tsin_b_d0_z, 5),
+
+ /* Bank Z func6 */
+ GROUP(s2_demod_gpio7, 6),
+ GROUP(s2_demod_gpio6, 6),
+ GROUP(s2_demod_gpio5, 6),
+ GROUP(s2_demod_gpio4, 6),
+ GROUP(s2_demod_gpio3, 6),
+ GROUP(s2_demod_gpio2, 6),
+ GROUP(diseqc_out, 6),
+ GROUP(s2_demod_gpio1, 6),
+ GROUP(s2_demod_gpio0, 6),
+
+ /* Bank Z func7 */
+ GROUP(gen_clk_z9, 7),
+ GROUP(gen_clk_z12, 7)
+};
+
+static const char * const gpio_periphs_groups[] = {
+ "GPIOE_0", "GPIOE_1",
+
+ "GPIOB_0", "GPIOB_1", "GPIOB_2", "GPIOB_3", "GPIOB_4", "GPIOB_5",
+ "GPIOB_6", "GPIOB_7", "GPIOB_8", "GPIOB_9", "GPIOB_10", "GPIOB_11",
+ "GPIOB_12", "GPIOB_13",
+
+ "GPIOC_0", "GPIOC_1", "GPIOC_2", "GPIOC_3", "GPIOC_4", "GPIOC_5",
+ "GPIOC_6", "GPIOC_7",
+
+ "GPIOD_0", "GPIOD_1", "GPIOD_2", "GPIOD_3", "GPIOD_4", "GPIOD_5",
+ "GPIOD_6", "GPIOD_7", "GPIOD_8", "GPIOD_9", "GPIOD_10", "GPIOD_11",
+
+ "GPIOH_0", "GPIOH_1", "GPIOH_2", "GPIOH_3", "GPIOH_4", "GPIOH_5",
+ "GPIOH_6", "GPIOH_7", "GPIOH_8", "GPIOH_9", "GPIOH_10", "GPIOH_11",
+
+ "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4", "GPIOX_5",
+ "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+ "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15", "GPIOX_16", "GPIOX_17",
+ "GPIOX_18", "GPIOX_19",
+
+ "GPIOZ_0", "GPIOZ_1", "GPIOZ_2", "GPIOZ_3", "GPIOZ_4", "GPIOZ_5",
+ "GPIOZ_6", "GPIOZ_7", "GPIOZ_8", "GPIOZ_9", "GPIOZ_10",
+ "GPIOZ_11", "GPIOZ_12",
+
+ "GPIO_TEST_N"
+};
+
+static const char * const i2c0_groups[] = {
+ "i2c0_sda", "i2c0_scl"
+};
+
+static const char * const i2c1_groups[] = {
+ "i2c1_sda_c", "i2c1_scl_c",
+ "i2c1_sda_d", "i2c1_scl_d",
+ "i2c1_sda_h", "i2c1_scl_h",
+ "i2c1_sda_x", "i2c1_scl_x"
+};
+
+static const char * const i2c2_groups[] = {
+ "i2c2_sda_d", "i2c2_scl_d",
+ "i2c2_sda_h8", "i2c2_scl_h9",
+ "i2c2_sda_h0", "i2c2_scl_h1"
+};
+
+static const char * const i2c3_groups[] = {
+ "i2c3_sda_x", "i2c3_scl_x",
+ "i2c3_sda_z", "i2c3_scl_z"
+};
+
+static const char * const i2c4_groups[] = {
+ "i2c4_sda_c", "i2c4_scl_c",
+ "i2c4_sda_d", "i2c4_scl_d",
+ "i2c4_scl_z", "i2c4_sda_z"
+};
+
+static const char * const uart_a_groups[] = {
+ "uart_a_tx", "uart_a_rx", "uart_a_cts", "uart_a_rts"
+};
+
+static const char * const uart_b_groups[] = {
+ "uart_b_tx_e", "uart_b_rx_e", "uart_b_rx_c", "uart_b_tx_c",
+ "uart_b_tx_d", "uart_b_rx_d", "uart_b_cts_d", "uart_b_rts_d"
+};
+
+static const char * const uart_c_groups[] = {
+ "uart_c_tx", "uart_c_rx"
+};
+
+static const char * const uart_d_groups[] = {
+ "uart_d_tx_h", "uart_d_rx_h", "uart_d_cts_h", "uart_d_rts_h",
+ "uart_d_tx_z", "uart_d_rx_z", "uart_d_cts_z", "uart_d_rts_z"
+};
+
+static const char * const uart_e_groups[] = {
+ "uart_e_tx_h", "uart_e_rx_h", "uart_e_tx_z11", "uart_e_rx_z12",
+ "uart_e_tx_z8", "uart_e_rx_z9"
+};
+
+static const char * const emmc_groups[] = {
+ "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3",
+ "emmc_nand_d4", "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7",
+ "emmc_clk", "emmc_rst", "emmc_cmd", "emmc_nand_ds"
+};
+
+static const char * const nand_groups[] = {
+ "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3",
+ "emmc_nand_d4", "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7",
+ "nand_wen_clk", "nand_ale", "nand_ren_wr", "nand_cle", "nand_ce0"
+};
+
+static const char * const spif_groups[] = {
+ "spif_hold", "spif_mo", "spif_mi", "spif_clk", "spif_wp",
+ "spif_cs"
+};
+
+static const char * const sdcard_groups[] = {
+ "sdcard_d0_c", "sdcard_d1_c", "sdcard_d2_c", "sdcard_d3_c",
+ "sdcard_clk_c", "sdcard_cmd_c", "sdcard_cd",
+ "sdcard_d0_z", "sdcard_d1_z", "sdcard_d2_z", "sdcard_d3_z",
+ "sdcard_clk_z", "sdcard_cmd_z"
+};
+
+static const char * const jtag_1_groups[] = {
+ "jtag_1_clk", "jtag_1_tms", "jtag_1_tdi", "jtag_1_tdo"
+};
+
+static const char * const jtag_2_groups[] = {
+ "jtag_2_tdo", "jtag_2_tdi", "jtag_2_clk", "jtag_2_tms"
+};
+
+static const char * const pdm_groups[] = {
+ "pdm_din1_c", "pdm_din0_c", "pdm_dclk_c",
+ "pdm_dclk_d", "pdm_din0_d", "pdm_din1_d",
+ "pdm_dclk_h", "pdm_din0_h", "pdm_din1_h",
+ "pdm_din0_x", "pdm_din1_x", "pdm_dclk_x",
+ "pdm_din1_z", "pdm_din0_z", "pdm_dclk_z"
+};
+
+static const char * const iso7816_groups[] = {
+ "iso7816_clk_c", "iso7816_data_c",
+ "iso7816_clk_h", "iso7816_data_h"
+};
+
+static const char * const tdm_groups[] = {
+ "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
+ "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
+ "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
+ "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
+ "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
+};
+
+static const char * const mclk_groups[] = {
+ "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
+
+};
+
+static const char * const remote_out_groups[] = {
+ "remote_out"
+};
+
+static const char * const remote_in_groups[] = {
+ "remote_in"
+};
+
+static const char * const clk12_24_groups[] = {
+ "clk12_24"
+};
+
+static const char * const clk_32k_in_groups[] = {
+ "clk_32k_in"
+};
+
+static const char * const pwm_a_hiz_groups[] = {
+ "pwm_a_hiz"
+};
+
+static const char * const pwm_b_hiz_groups[] = {
+ "pwm_b_hiz"
+};
+
+static const char * const pwm_c_hiz_groups[] = {
+ "pwm_c_hiz"
+};
+
+static const char * const pwm_g_hiz_groups[] = {
+ "pwm_g_hiz"
+};
+
+static const char * const pwm_a_groups[] = {
+ "pwm_a_d"
+};
+
+static const char * const pwm_b_groups[] = {
+ "pwm_b_d", "pwm_b_x"
+
+};
+
+static const char * const pwm_c_groups[] = {
+ "pwm_c_d", "pwm_c_x"
+};
+
+static const char * const pwm_d_groups[] = {
+ "pwm_d_d", "pwm_d_h"
+};
+
+static const char * const pwm_e_groups[] = {
+ "pwm_e_x", "pwm_e_z"
+};
+
+static const char * const pwm_f_groups[] = {
+ "pwm_f_x", "pwm_f_z"
+};
+
+static const char * const pwm_g_groups[] = {
+ "pwm_g_d", "pwm_g_z"
+};
+
+static const char * const pwm_h_groups[] = {
+ "pwm_h",
+};
+
+static const char * const pwm_i_groups[] = {
+ "pwm_i_d", "pwm_i_h"
+};
+
+static const char * const pwm_j_groups[] = {
+ "pwm_j",
+};
+
+static const char * const mic_mute_groups[] = {
+ "mic_mute_en", "mic_mute_key"
+};
+
+static const char * const hdmitx_groups[] = {
+ "hdmitx_sda", "hdmitx_sck", "hdmitx_hpd_in"
+};
+
+static const char * const ao_cec_a_groups[] = {
+ "ao_cec_a"
+};
+
+static const char * const ao_cec_b_groups[] = {
+ "ao_cec_b"
+};
+
+static const char * const spdif_out_groups[] = {
+ "spdif_out_h", "spdif_out_z"
+};
+
+static const char * const spdif_in_groups[] = {
+ "spdif_in"
+};
+
+static const char * const eth_groups[] = {
+ "eth_link_led", "eth_act_led"
+};
+
+static const char * const spi_a_groups[] = {
+ "spi_a_miso_h", "spi_a_mosi_h", "spi_a_clk_h", "spi_a_ss0_h",
+
+ "spi_a_mosi_x", "spi_a_miso_x", "spi_a_ss0_x", "spi_a_clk_x",
+
+ "spi_a_miso_z", "spi_a_mosi_z", "spi_a_clk_z", "spi_a_ss0_z",
+ "spi_a_ss1_z", "spi_a_ss2_z"
+};
+
+static const char * const gen_clk_groups[] = {
+ "gen_clk_h", "gen_clk_z9", "gen_clk_z12"
+};
+
+static const char * const sdio_groups[] = {
+ "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", "sdio_clk", "sdio_cmd"
+};
+
+static const char * const i2c_slave_groups[] = {
+ "i2c_slave_scl", "i2c_slave_sda"
+};
+
+static const char * const dtv_groups[] = {
+ "dtv_a_if_agc_z10", "dtv_a_if_agc_z6", "dtv_b_if_agc",
+ "dtv_a_rf_agc", "dtv_b_rf_agc"
+};
+
+static const char * const tsin_a_groups[] = {
+ "tsin_a_clk", "tsin_a_sop", "tsin_a_valid", "tsin_a_din0"
+};
+
+static const char * const tsin_b_groups[] = {
+ "tsin_b_clk_c", "tsin_b_sop_c", "tsin_b_valid_c", "tsin_b_d0_c",
+ "tsin_b_clk_z", "tsin_b_sop_z", "tsin_b_valid_z", "tsin_b_d0_z"
+};
+
+static const char * const tsin_b1_groups[] = {
+ "tsin_b1_clk", "tsin_b1_sop", "tsin_b1_valid", "tsin_b1_d0"
+};
+
+static const char * const diseqc_out_groups[] = {
+ "diseqc_out"
+};
+
+static const char * const s2_demod_groups[] = {
+ "s2_demod_gpio7", "s2_demod_gpio6", "s2_demod_gpio5", "s2_demod_gpio4",
+ "s2_demod_gpio3", "s2_demod_gpio2", "s2_demod_gpio1", "s2_demod_gpio0"
+};
+
+static struct meson_pmx_func meson_s4_periphs_functions[] = {
+ FUNCTION(gpio_periphs),
+ FUNCTION(i2c0),
+ FUNCTION(i2c1),
+ FUNCTION(i2c2),
+ FUNCTION(i2c3),
+ FUNCTION(i2c4),
+ FUNCTION(uart_a),
+ FUNCTION(uart_b),
+ FUNCTION(uart_c),
+ FUNCTION(uart_d),
+ FUNCTION(uart_e),
+ FUNCTION(emmc),
+ FUNCTION(nand),
+ FUNCTION(spif),
+ FUNCTION(sdcard),
+ FUNCTION(jtag_1),
+ FUNCTION(jtag_2),
+ FUNCTION(pdm),
+ FUNCTION(iso7816),
+ FUNCTION(tdm),
+ FUNCTION(mclk),
+ FUNCTION(remote_out),
+ FUNCTION(remote_in),
+ FUNCTION(clk12_24),
+ FUNCTION(clk_32k_in),
+ FUNCTION(pwm_a_hiz),
+ FUNCTION(pwm_b_hiz),
+ FUNCTION(pwm_c_hiz),
+ FUNCTION(pwm_g_hiz),
+ FUNCTION(pwm_a),
+ FUNCTION(pwm_b),
+ FUNCTION(pwm_c),
+ FUNCTION(pwm_d),
+ FUNCTION(pwm_e),
+ FUNCTION(pwm_f),
+ FUNCTION(pwm_g),
+ FUNCTION(pwm_h),
+ FUNCTION(pwm_i),
+ FUNCTION(pwm_j),
+ FUNCTION(mic_mute),
+ FUNCTION(hdmitx),
+ FUNCTION(ao_cec_a),
+ FUNCTION(ao_cec_b),
+ FUNCTION(spdif_out),
+ FUNCTION(spdif_in),
+ FUNCTION(eth),
+ FUNCTION(spi_a),
+ FUNCTION(gen_clk),
+ FUNCTION(sdio),
+ FUNCTION(i2c_slave),
+ FUNCTION(dtv),
+ FUNCTION(tsin_a),
+ FUNCTION(tsin_b),
+ FUNCTION(tsin_b1),
+ FUNCTION(diseqc_out),
+ FUNCTION(s2_demod)
+};
+
+static struct meson_bank meson_s4_periphs_banks[] = {
+ /* name first last irq pullen pull dir out in */
+ BANK_DS("B", GPIOB_0, GPIOB_13, 0, 13,
+ 0x63, 0, 0x64, 0, 0x62, 0, 0x61, 0, 0x60, 0, 0x67, 0),
+ BANK_DS("C", GPIOC_0, GPIOC_7, 14, 21,
+ 0x53, 0, 0x54, 0, 0x52, 0, 0x51, 0, 0x50, 0, 0x57, 0),
+ BANK_DS("E", GPIOE_0, GPIOE_1, 22, 23,
+ 0x43, 0, 0x44, 0, 0x42, 0, 0x41, 0, 0x40, 0, 0x47, 0),
+ BANK_DS("D", GPIOD_0, GPIOD_11, 24, 35,
+ 0x33, 0, 0x34, 0, 0x32, 0, 0x31, 0, 0x30, 0, 0x37, 0),
+ BANK_DS("H", GPIOH_0, GPIOH_11, 36, 47,
+ 0x23, 0, 0x24, 0, 0x22, 0, 0x21, 0, 0x20, 0, 0x27, 0),
+ BANK_DS("X", GPIOX_0, GPIOX_19, 48, 67,
+ 0x13, 0, 0x14, 0, 0x12, 0, 0x11, 0, 0x10, 0, 0x17, 0),
+ BANK_DS("Z", GPIOZ_0, GPIOZ_12, 68, 80,
+ 0x03, 0, 0x04, 0, 0x02, 0, 0x01, 0, 0x00, 0, 0x07, 0),
+ BANK_DS("TEST_N", GPIO_TEST_N, GPIO_TEST_N, -1, -1,
+ 0x83, 0, 0x84, 0, 0x82, 0, 0x81, 0, 0x80, 0, 0x87, 0),
+};
+
+static struct meson_pmx_bank meson_s4_periphs_pmx_banks[] = {
+ /*name first lask reg offset*/
+ BANK_PMX("B", GPIOB_0, GPIOB_13, 0x00, 0),
+ BANK_PMX("C", GPIOC_0, GPIOC_7, 0x9, 0),
+ BANK_PMX("E", GPIOE_0, GPIOE_1, 0x12, 0),
+ BANK_PMX("D", GPIOD_0, GPIOD_11, 0x10, 0),
+ BANK_PMX("H", GPIOH_0, GPIOH_11, 0xb, 0),
+ BANK_PMX("X", GPIOX_0, GPIOX_19, 0x3, 0),
+ BANK_PMX("Z", GPIOZ_0, GPIOZ_12, 0x6, 0),
+ BANK_PMX("TEST_N", GPIO_TEST_N, GPIO_TEST_N, 0xf, 0),
+};
+
+static struct meson_axg_pmx_data meson_s4_periphs_pmx_banks_data = {
+ .pmx_banks = meson_s4_periphs_pmx_banks,
+ .num_pmx_banks = ARRAY_SIZE(meson_s4_periphs_pmx_banks),
+};
+
+static struct meson_pinctrl_data meson_s4_periphs_pinctrl_data = {
+ .name = "periphs-banks",
+ .pins = meson_s4_periphs_pins,
+ .groups = meson_s4_periphs_groups,
+ .funcs = meson_s4_periphs_functions,
+ .banks = meson_s4_periphs_banks,
+ .num_pins = ARRAY_SIZE(meson_s4_periphs_pins),
+ .num_groups = ARRAY_SIZE(meson_s4_periphs_groups),
+ .num_funcs = ARRAY_SIZE(meson_s4_periphs_functions),
+ .num_banks = ARRAY_SIZE(meson_s4_periphs_banks),
+ .pmx_ops = &meson_axg_pmx_ops,
+ .pmx_data = &meson_s4_periphs_pmx_banks_data,
+ .parse_dt = &meson_a1_parse_dt_extra,
+};
+
+static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson-s4-periphs-pinctrl",
+ .data = &meson_s4_periphs_pinctrl_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, meson_s4_pinctrl_dt_match);
+
+static struct platform_driver meson_s4_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson-s4-pinctrl",
+ .of_match_table = meson_s4_pinctrl_dt_match,
+ },
+};
+
+module_platform_driver(meson_s4_pinctrl_driver);
+MODULE_LICENSE("Dual BSD/GPL");
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-14 2:21 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:21 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio
Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
same register laytout as the previous Meson-A1.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
drivers/pinctrl/meson/Kconfig | 6 +
drivers/pinctrl/meson/Makefile | 1 +
drivers/pinctrl/meson/pinctrl-meson-s4.c | 1229 ++++++++++++++++++++++
3 files changed, 1236 insertions(+)
create mode 100644 drivers/pinctrl/meson/pinctrl-meson-s4.c
diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig
index b2855e341a75..d1955c65b4b6 100644
--- a/drivers/pinctrl/meson/Kconfig
+++ b/drivers/pinctrl/meson/Kconfig
@@ -61,4 +61,10 @@ config PINCTRL_MESON_A1
select PINCTRL_MESON_AXG_PMX
default y
+config PINCTRL_MESON_S4
+ tristate "Meson s4 Soc pinctrl driver"
+ depends on ARM64
+ select PINCTRL_MESON_AXG_PMX
+ default y
+
endif
diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
index 1a5bffe953f9..694f0596bfbc 100644
--- a/drivers/pinctrl/meson/Makefile
+++ b/drivers/pinctrl/meson/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_MESON_AXG_PMX) += pinctrl-meson-axg-pmx.o
obj-$(CONFIG_PINCTRL_MESON_AXG) += pinctrl-meson-axg.o
obj-$(CONFIG_PINCTRL_MESON_G12A) += pinctrl-meson-g12a.o
obj-$(CONFIG_PINCTRL_MESON_A1) += pinctrl-meson-a1.o
+obj-$(CONFIG_PINCTRL_MESON_S4) += pinctrl-meson-s4.o
diff --git a/drivers/pinctrl/meson/pinctrl-meson-s4.c b/drivers/pinctrl/meson/pinctrl-meson-s4.c
new file mode 100644
index 000000000000..be26ac17847a
--- /dev/null
+++ b/drivers/pinctrl/meson/pinctrl-meson-s4.c
@@ -0,0 +1,1229 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Pin controller and GPIO driver for Amlogic Meson S4 SoC.
+ *
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song@amlogic.com>
+ */
+
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include "pinctrl-meson.h"
+#include "pinctrl-meson-axg-pmx.h"
+
+static const struct pinctrl_pin_desc meson_s4_periphs_pins[] = {
+ MESON_PIN(GPIOE_0),
+ MESON_PIN(GPIOE_1),
+
+ MESON_PIN(GPIOB_0),
+ MESON_PIN(GPIOB_1),
+ MESON_PIN(GPIOB_2),
+ MESON_PIN(GPIOB_3),
+ MESON_PIN(GPIOB_4),
+ MESON_PIN(GPIOB_5),
+ MESON_PIN(GPIOB_6),
+ MESON_PIN(GPIOB_7),
+ MESON_PIN(GPIOB_8),
+ MESON_PIN(GPIOB_9),
+ MESON_PIN(GPIOB_10),
+ MESON_PIN(GPIOB_11),
+ MESON_PIN(GPIOB_12),
+ MESON_PIN(GPIOB_13),
+
+ MESON_PIN(GPIOC_0),
+ MESON_PIN(GPIOC_1),
+ MESON_PIN(GPIOC_2),
+ MESON_PIN(GPIOC_3),
+ MESON_PIN(GPIOC_4),
+ MESON_PIN(GPIOC_5),
+ MESON_PIN(GPIOC_6),
+ MESON_PIN(GPIOC_7),
+
+ MESON_PIN(GPIOD_0),
+ MESON_PIN(GPIOD_1),
+ MESON_PIN(GPIOD_2),
+ MESON_PIN(GPIOD_3),
+ MESON_PIN(GPIOD_4),
+ MESON_PIN(GPIOD_5),
+ MESON_PIN(GPIOD_6),
+ MESON_PIN(GPIOD_7),
+ MESON_PIN(GPIOD_8),
+ MESON_PIN(GPIOD_9),
+ MESON_PIN(GPIOD_10),
+ MESON_PIN(GPIOD_11),
+
+ MESON_PIN(GPIOH_0),
+ MESON_PIN(GPIOH_1),
+ MESON_PIN(GPIOH_2),
+ MESON_PIN(GPIOH_3),
+ MESON_PIN(GPIOH_4),
+ MESON_PIN(GPIOH_5),
+ MESON_PIN(GPIOH_6),
+ MESON_PIN(GPIOH_7),
+ MESON_PIN(GPIOH_8),
+ MESON_PIN(GPIOH_9),
+ MESON_PIN(GPIOH_10),
+ MESON_PIN(GPIOH_11),
+
+ MESON_PIN(GPIOX_0),
+ MESON_PIN(GPIOX_1),
+ MESON_PIN(GPIOX_2),
+ MESON_PIN(GPIOX_3),
+ MESON_PIN(GPIOX_4),
+ MESON_PIN(GPIOX_5),
+ MESON_PIN(GPIOX_6),
+ MESON_PIN(GPIOX_7),
+ MESON_PIN(GPIOX_8),
+ MESON_PIN(GPIOX_9),
+ MESON_PIN(GPIOX_10),
+ MESON_PIN(GPIOX_11),
+ MESON_PIN(GPIOX_12),
+ MESON_PIN(GPIOX_13),
+ MESON_PIN(GPIOX_14),
+ MESON_PIN(GPIOX_15),
+ MESON_PIN(GPIOX_16),
+ MESON_PIN(GPIOX_17),
+ MESON_PIN(GPIOX_18),
+ MESON_PIN(GPIOX_19),
+
+ MESON_PIN(GPIOZ_0),
+ MESON_PIN(GPIOZ_1),
+ MESON_PIN(GPIOZ_2),
+ MESON_PIN(GPIOZ_3),
+ MESON_PIN(GPIOZ_4),
+ MESON_PIN(GPIOZ_5),
+ MESON_PIN(GPIOZ_6),
+ MESON_PIN(GPIOZ_7),
+ MESON_PIN(GPIOZ_8),
+ MESON_PIN(GPIOZ_9),
+ MESON_PIN(GPIOZ_10),
+ MESON_PIN(GPIOZ_11),
+ MESON_PIN(GPIOZ_12),
+
+ MESON_PIN(GPIO_TEST_N)
+};
+
+/* BANK E func1 */
+static const unsigned int i2c0_sda_pins[] = { GPIOE_0 };
+static const unsigned int i2c0_scl_pins[] = { GPIOE_1 };
+
+/* BANK E func2 */
+static const unsigned int uart_b_tx_e_pins[] = { GPIOE_0 };
+static const unsigned int uart_b_rx_e_pins[] = { GPIOE_1 };
+
+/* BANK E func3 */
+static const unsigned int pwm_h_pins[] = { GPIOE_0 };
+static const unsigned int pwm_j_pins[] = { GPIOE_1 };
+
+/* BANK B func1 */
+static const unsigned int emmc_nand_d0_pins[] = { GPIOB_0 };
+static const unsigned int emmc_nand_d1_pins[] = { GPIOB_1 };
+static const unsigned int emmc_nand_d2_pins[] = { GPIOB_2 };
+static const unsigned int emmc_nand_d3_pins[] = { GPIOB_3 };
+static const unsigned int emmc_nand_d4_pins[] = { GPIOB_4 };
+static const unsigned int emmc_nand_d5_pins[] = { GPIOB_5 };
+static const unsigned int emmc_nand_d6_pins[] = { GPIOB_6 };
+static const unsigned int emmc_nand_d7_pins[] = { GPIOB_7 };
+static const unsigned int emmc_clk_pins[] = { GPIOB_8 };
+static const unsigned int emmc_rst_pins[] = { GPIOB_9 };
+static const unsigned int emmc_cmd_pins[] = { GPIOB_10 };
+static const unsigned int emmc_nand_ds_pins[] = { GPIOB_11 };
+
+/* Bank B func2 */
+static const unsigned int nand_wen_clk_pins[] = { GPIOB_8 };
+static const unsigned int nand_ale_pins[] = { GPIOB_9 };
+static const unsigned int nand_ren_wr_pins[] = { GPIOB_10 };
+static const unsigned int nand_cle_pins[] = { GPIOB_11 };
+static const unsigned int nand_ce0_pins[] = { GPIOB_12 };
+
+/* Bank B func3 */
+static const unsigned int spif_hold_pins[] = { GPIOB_3 };
+static const unsigned int spif_mo_pins[] = { GPIOB_4 };
+static const unsigned int spif_mi_pins[] = { GPIOB_5 };
+static const unsigned int spif_clk_pins[] = { GPIOB_6 };
+static const unsigned int spif_wp_pins[] = { GPIOB_7 };
+static const unsigned int spif_cs_pins[] = { GPIOB_13 };
+
+/* Bank C func1 */
+static const unsigned int sdcard_d0_c_pins[] = { GPIOC_0 };
+static const unsigned int sdcard_d1_c_pins[] = { GPIOC_1 };
+static const unsigned int sdcard_d2_c_pins[] = { GPIOC_2 };
+static const unsigned int sdcard_d3_c_pins[] = { GPIOC_3 };
+static const unsigned int sdcard_clk_c_pins[] = { GPIOC_4 };
+static const unsigned int sdcard_cmd_c_pins[] = { GPIOC_5 };
+static const unsigned int sdcard_cd_pins[] = { GPIOC_6 };
+
+/* Bank C func2 */
+static const unsigned int jtag_2_tdo_pins[] = { GPIOC_0 };
+static const unsigned int jtag_2_tdi_pins[] = { GPIOC_1 };
+static const unsigned int uart_b_rx_c_pins[] = { GPIOC_2 };
+static const unsigned int uart_b_tx_c_pins[] = { GPIOC_3 };
+static const unsigned int jtag_2_clk_pins[] = { GPIOC_4 };
+static const unsigned int jtag_2_tms_pins[] = { GPIOC_5 };
+static const unsigned int i2c1_sda_c_pins[] = { GPIOC_6 };
+static const unsigned int i2c1_scl_c_pins[] = { GPIOC_7 };
+
+/* Bank C func3 */
+static const unsigned int pdm_din1_c_pins[] = { GPIOC_0 };
+static const unsigned int pdm_din0_c_pins[] = { GPIOC_1 };
+static const unsigned int i2c4_sda_c_pins[] = { GPIOC_2 };
+static const unsigned int i2c4_scl_c_pins[] = { GPIOC_3 };
+static const unsigned int pdm_dclk_c_pins[] = { GPIOC_4 };
+static const unsigned int iso7816_clk_c_pins[] = { GPIOC_5 };
+static const unsigned int iso7816_data_c_pins[] = { GPIOC_6 };
+
+/* Bank C func4 */
+static const unsigned int tdm_d2_c_pins[] = { GPIOC_0 };
+static const unsigned int tdm_d3_c_pins[] = { GPIOC_1 };
+static const unsigned int tdm_fs1_c_pins[] = { GPIOC_2 };
+static const unsigned int tdm_sclk1_c_pins[] = { GPIOC_3 };
+static const unsigned int mclk_1_c_pins[] = { GPIOC_4 };
+static const unsigned int tdm_d4_c_pins[] = { GPIOC_5 };
+static const unsigned int tdm_d5_c_pins[] = { GPIOC_6 };
+
+/* Bank D func1 */
+static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
+static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
+static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
+static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
+static const unsigned int remote_out_pins[] = { GPIOD_4 };
+static const unsigned int remote_in_pins[] = { GPIOD_5 };
+static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
+static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
+static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
+static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
+static const unsigned int clk12_24_pins[] = { GPIOD_10 };
+static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
+
+/* Bank D func2 */
+static const unsigned int i2c4_sda_d_pins[] = { GPIOD_2 };
+static const unsigned int i2c4_scl_d_pins[] = { GPIOD_3 };
+static const unsigned int mclk_1_d_pins[] = { GPIOD_4 };
+static const unsigned int tdm_sclk1_d_pins[] = { GPIOD_6 };
+static const unsigned int tdm_fs1_d_pins[] = { GPIOD_7 };
+static const unsigned int tdm_d4_d_pins[] = { GPIOD_8 };
+static const unsigned int tdm_d3_d_pins[] = { GPIOD_9 };
+static const unsigned int tdm_d2_d_pins[] = { GPIOD_10 };
+static const unsigned int pwm_g_d_pins[] = { GPIOD_11 };
+
+/* Bank D func3 */
+static const unsigned int uart_c_tx_pins[] = { GPIOD_2 };
+static const unsigned int uart_c_rx_pins[] = { GPIOD_3 };
+static const unsigned int pwm_b_d_pins[] = { GPIOD_4 };
+static const unsigned int pwm_a_d_pins[] = { GPIOD_6 };
+static const unsigned int pwm_c_d_pins[] = { GPIOD_7 };
+static const unsigned int pwm_d_d_pins[] = { GPIOD_8 };
+static const unsigned int pwm_i_d_pins[] = { GPIOD_9 };
+
+/* Bank D func4 */
+static const unsigned int clk_32k_in_pins[] = { GPIOD_2 };
+static const unsigned int pwm_b_hiz_pins[] = { GPIOD_4 };
+static const unsigned int pwm_a_hiz_pins[] = { GPIOD_6 };
+static const unsigned int pwm_c_hiz_pins[] = { GPIOD_7 };
+static const unsigned int pdm_dclk_d_pins[] = { GPIOD_8 };
+static const unsigned int pdm_din0_d_pins[] = { GPIOD_9 };
+static const unsigned int pdm_din1_d_pins[] = { GPIOD_10 };
+
+/* Bank D func5 */
+static const unsigned int mic_mute_en_pins[] = { GPIOD_2 };
+static const unsigned int mic_mute_key_pins[] = { GPIOD_3 };
+static const unsigned int i2c1_sda_d_pins[] = { GPIOD_6 };
+static const unsigned int i2c1_scl_d_pins[] = { GPIOD_7 };
+static const unsigned int i2c2_sda_d_pins[] = { GPIOD_10 };
+static const unsigned int i2c2_scl_d_pins[] = { GPIOD_11 };
+
+/* Bank D func6 */
+static const unsigned int gen_clk_d_pins[] = { GPIOD_10 };
+static const unsigned int tsin_b_clk_c_pins[] = { GPIOD_6 };
+static const unsigned int tsin_b_sop_c_pins[] = { GPIOD_7 };
+static const unsigned int tsin_b_valid_c_pins[] = { GPIOD_8 };
+static const unsigned int tsin_b_d0_c_pins[] = { GPIOD_9 };
+
+/* Bank H func1 */
+static const unsigned int hdmitx_sda_pins[] = { GPIOH_0 };
+static const unsigned int hdmitx_sck_pins[] = { GPIOH_1 };
+static const unsigned int hdmitx_hpd_in_pins[] = { GPIOH_2 };
+static const unsigned int ao_cec_a_pins[] = { GPIOH_3 };
+static const unsigned int spdif_out_h_pins[] = { GPIOH_4 };
+static const unsigned int spdif_in_pins[] = { GPIOH_5 };
+static const unsigned int i2c1_sda_h_pins[] = { GPIOH_6 };
+static const unsigned int i2c1_scl_h_pins[] = { GPIOH_7 };
+static const unsigned int i2c2_sda_h8_pins[] = { GPIOH_8 };
+static const unsigned int i2c2_scl_h9_pins[] = { GPIOH_9 };
+static const unsigned int eth_link_led_pins[] = { GPIOH_10 };
+static const unsigned int eth_act_led_pins[] = { GPIOH_11 };
+
+/* Bank H func2 */
+static const unsigned int i2c2_sda_h0_pins[] = { GPIOH_0 };
+static const unsigned int i2c2_scl_h1_pins[] = { GPIOH_1 };
+static const unsigned int ao_cec_b_pins[] = { GPIOH_3 };
+static const unsigned int uart_d_tx_h_pins[] = { GPIOH_4 };
+static const unsigned int uart_d_rx_h_pins[] = { GPIOH_5 };
+static const unsigned int uart_d_cts_h_pins[] = { GPIOH_6 };
+static const unsigned int uart_d_rts_h_pins[] = { GPIOH_7 };
+static const unsigned int iso7816_clk_h_pins[] = { GPIOH_8 };
+static const unsigned int iso7816_data_h_pins[] = { GPIOH_9 };
+static const unsigned int uart_e_tx_h_pins[] = { GPIOH_10 };
+static const unsigned int uart_e_rx_h_pins[] = { GPIOH_11 };
+
+/* Bank H func3 */
+static const unsigned int pwm_d_h_pins[] = { GPIOH_6 };
+static const unsigned int pwm_i_h_pins[] = { GPIOH_7 };
+static const unsigned int pdm_dclk_h_pins[] = { GPIOH_8 };
+static const unsigned int pdm_din0_h_pins[] = { GPIOH_9 };
+static const unsigned int pdm_din1_h_pins[] = { GPIOH_10 };
+
+/* Bank H func4 */
+static const unsigned int mclk_1_h_pins[] = { GPIOH_4 };
+static const unsigned int tdm_sclk1_h_pins[] = { GPIOH_5 };
+static const unsigned int tdm_fs1_h_pins[] = { GPIOH_6 };
+static const unsigned int tdm_d2_h_pins[] = { GPIOH_7 };
+static const unsigned int tdm_d3_h_pins[] = { GPIOH_8 };
+static const unsigned int tdm_d4_h_pins[] = { GPIOH_9 };
+
+/* Bank H func5 */
+static const unsigned int spi_a_miso_h_pins[] = { GPIOH_4 };
+static const unsigned int spi_a_mosi_h_pins[] = { GPIOH_5 };
+static const unsigned int spi_a_clk_h_pins[] = { GPIOH_6 };
+static const unsigned int spi_a_ss0_h_pins[] = { GPIOH_7 };
+
+/* Bank H func6 */
+static const unsigned int gen_clk_h_pins[] = { GPIOH_11 };
+static const unsigned int tsin_b1_clk_pins[] = { GPIOH_4 };
+static const unsigned int tsin_b1_sop_pins[] = { GPIOH_5 };
+static const unsigned int tsin_b1_valid_pins[] = { GPIOH_6 };
+static const unsigned int tsin_b1_d0_pins[] = { GPIOH_7 };
+
+/* Bank X func1 */
+static const unsigned int sdio_d0_pins[] = { GPIOX_0 };
+static const unsigned int sdio_d1_pins[] = { GPIOX_1 };
+static const unsigned int sdio_d2_pins[] = { GPIOX_2 };
+static const unsigned int sdio_d3_pins[] = { GPIOX_3 };
+static const unsigned int sdio_clk_pins[] = { GPIOX_4 };
+static const unsigned int sdio_cmd_pins[] = { GPIOX_5 };
+static const unsigned int pwm_a_x_pins[] = { GPIOX_6 };
+static const unsigned int pwm_f_x_pins[] = { GPIOX_7 };
+static const unsigned int tdm_d1_pins[] = { GPIOX_8 };
+static const unsigned int tdm_d0_pins[] = { GPIOX_9 };
+static const unsigned int tdm_fs0_pins[] = { GPIOX_10 };
+static const unsigned int tdm_sclk0_pins[] = { GPIOX_11 };
+static const unsigned int uart_a_tx_pins[] = { GPIOX_12 };
+static const unsigned int uart_a_rx_pins[] = { GPIOX_13 };
+static const unsigned int uart_a_cts_pins[] = { GPIOX_14 };
+static const unsigned int uart_a_rts_pins[] = { GPIOX_15 };
+static const unsigned int pwm_e_x_pins[] = { GPIOX_16 };
+static const unsigned int i2c1_sda_x_pins[] = { GPIOX_17 };
+static const unsigned int i2c1_scl_x_pins[] = { GPIOX_18 };
+static const unsigned int pwm_b_x_pins[] = { GPIOX_19 };
+
+/* Bank X func2 */
+static const unsigned int pdm_din0_x_pins[] = { GPIOX_8 };
+static const unsigned int pdm_din1_x_pins[] = { GPIOX_9 };
+static const unsigned int pdm_dclk_x_pins[] = { GPIOX_11 };
+
+/* Bank X func3 */
+static const unsigned int spi_a_mosi_x_pins[] = { GPIOX_8 };
+static const unsigned int spi_a_miso_x_pins[] = { GPIOX_9 };
+static const unsigned int spi_a_ss0_x_pins[] = { GPIOX_10 };
+static const unsigned int spi_a_clk_x_pins[] = { GPIOX_11 };
+
+/* Bank X func4 */
+static const unsigned int pwm_c_x_pins[] = { GPIOX_8 };
+static const unsigned int i2c_slave_scl_pins[] = { GPIOX_10 };
+static const unsigned int i2c_slave_sda_pins[] = { GPIOX_11 };
+
+/* Bank X func5 */
+static const unsigned int i2c3_sda_x_pins[] = { GPIOX_10 };
+static const unsigned int i2c3_scl_x_pins[] = { GPIOX_11 };
+
+/* Bank Z func1 */
+static const unsigned int tdm_fs2_pins[] = { GPIOZ_0 };
+static const unsigned int tdm_sclk2_pins[] = { GPIOZ_1 };
+static const unsigned int tdm_d4_z_pins[] = { GPIOZ_2 };
+static const unsigned int tdm_d5_z_pins[] = { GPIOZ_3 };
+static const unsigned int tdm_d6_pins[] = { GPIOZ_4 };
+static const unsigned int tdm_d7_pins[] = { GPIOZ_5 };
+static const unsigned int mclk_2_pins[] = { GPIOZ_6 };
+static const unsigned int spdif_out_z_pins[] = { GPIOZ_9 };
+static const unsigned int dtv_a_if_agc_z10_pins[] = { GPIOZ_10 };
+static const unsigned int uart_e_tx_z11_pins[] = { GPIOZ_11 };
+static const unsigned int uart_e_rx_z12_pins[] = { GPIOZ_12 };
+
+/* Bank Z func2 */
+static const unsigned int tsin_a_clk_pins[] = { GPIOZ_0 };
+static const unsigned int tsin_a_sop_pins[] = { GPIOZ_1 };
+static const unsigned int tsin_a_valid_pins[] = { GPIOZ_2 };
+static const unsigned int tsin_a_din0_pins[] = { GPIOZ_3 };
+static const unsigned int dtv_a_if_agc_z6_pins[] = { GPIOZ_6 };
+static const unsigned int dtv_b_if_agc_pins[] = { GPIOZ_7 };
+static const unsigned int i2c3_sda_z_pins[] = { GPIOZ_8 };
+static const unsigned int i2c3_scl_z_pins[] = { GPIOZ_9 };
+static const unsigned int dtv_a_rf_agc_pins[] = { GPIOZ_10 };
+static const unsigned int dtv_b_rf_agc_pins[] = { GPIOZ_11 };
+
+/* Bank Z func3 */
+static const unsigned int sdcard_d0_z_pins[] = { GPIOZ_0 };
+static const unsigned int sdcard_d1_z_pins[] = { GPIOZ_1 };
+static const unsigned int sdcard_d2_z_pins[] = { GPIOZ_2 };
+static const unsigned int sdcard_d3_z_pins[] = { GPIOZ_3 };
+static const unsigned int sdcard_clk_z_pins[] = { GPIOZ_4 };
+static const unsigned int sdcard_cmd_z_pins[] = { GPIOZ_5 };
+static const unsigned int uart_e_tx_z8_pins[] = { GPIOZ_8 };
+static const unsigned int uart_e_rx_z9_pins[] = { GPIOZ_9 };
+static const unsigned int pdm_din1_z_pins[] = { GPIOZ_10 };
+static const unsigned int pdm_din0_z_pins[] = { GPIOZ_11 };
+static const unsigned int pdm_dclk_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func4 */
+static const unsigned int spi_a_miso_z_pins[] = { GPIOZ_0 };
+static const unsigned int spi_a_mosi_z_pins[] = { GPIOZ_1 };
+static const unsigned int spi_a_clk_z_pins[] = { GPIOZ_2 };
+static const unsigned int spi_a_ss0_z_pins[] = { GPIOZ_3 };
+static const unsigned int spi_a_ss1_z_pins[] = { GPIOZ_4 };
+static const unsigned int spi_a_ss2_z_pins[] = { GPIOZ_5 };
+static const unsigned int i2c4_scl_z_pins[] = { GPIOZ_11 };
+static const unsigned int i2c4_sda_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func5 */
+static const unsigned int uart_d_tx_z_pins[] = { GPIOZ_0 };
+static const unsigned int uart_d_rx_z_pins[] = { GPIOZ_1 };
+static const unsigned int uart_d_cts_z_pins[] = { GPIOZ_2 };
+static const unsigned int uart_d_rts_z_pins[] = { GPIOZ_3 };
+static const unsigned int pwm_g_z_pins[] = { GPIOZ_4 };
+static const unsigned int pwm_f_z_pins[] = { GPIOZ_5 };
+static const unsigned int pwm_e_z_pins[] = { GPIOZ_6 };
+static const unsigned int tsin_b_clk_z_pins[] = { GPIOZ_7 };
+static const unsigned int tsin_b_sop_z_pins[] = { GPIOZ_10 };
+static const unsigned int tsin_b_valid_z_pins[] = { GPIOZ_11 };
+static const unsigned int tsin_b_d0_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func6 */
+static const unsigned int s2_demod_gpio7_pins[] = { GPIOZ_0 };
+static const unsigned int s2_demod_gpio6_pins[] = { GPIOZ_1 };
+static const unsigned int s2_demod_gpio5_pins[] = { GPIOZ_2 };
+static const unsigned int s2_demod_gpio4_pins[] = { GPIOZ_3 };
+static const unsigned int s2_demod_gpio3_pins[] = { GPIOZ_4 };
+static const unsigned int s2_demod_gpio2_pins[] = { GPIOZ_5 };
+static const unsigned int diseqc_out_pins[] = { GPIOZ_7 };
+static const unsigned int s2_demod_gpio1_pins[] = { GPIOZ_8 };
+static const unsigned int s2_demod_gpio0_pins[] = { GPIOZ_12 };
+
+/* Bank Z func7 */
+static const unsigned int gen_clk_z9_pins[] = { GPIOZ_9 };
+static const unsigned int gen_clk_z12_pins[] = { GPIOZ_12 };
+
+static struct meson_pmx_group meson_s4_periphs_groups[] = {
+ GPIO_GROUP(GPIOE_0),
+ GPIO_GROUP(GPIOE_1),
+
+ GPIO_GROUP(GPIOB_0),
+ GPIO_GROUP(GPIOB_1),
+ GPIO_GROUP(GPIOB_2),
+ GPIO_GROUP(GPIOB_3),
+ GPIO_GROUP(GPIOB_4),
+ GPIO_GROUP(GPIOB_5),
+ GPIO_GROUP(GPIOB_6),
+ GPIO_GROUP(GPIOB_7),
+ GPIO_GROUP(GPIOB_8),
+ GPIO_GROUP(GPIOB_9),
+ GPIO_GROUP(GPIOB_10),
+ GPIO_GROUP(GPIOB_11),
+ GPIO_GROUP(GPIOB_12),
+ GPIO_GROUP(GPIOB_13),
+
+ GPIO_GROUP(GPIOC_0),
+ GPIO_GROUP(GPIOC_1),
+ GPIO_GROUP(GPIOC_2),
+ GPIO_GROUP(GPIOC_3),
+ GPIO_GROUP(GPIOC_4),
+ GPIO_GROUP(GPIOC_5),
+ GPIO_GROUP(GPIOC_6),
+ GPIO_GROUP(GPIOC_7),
+
+ GPIO_GROUP(GPIOD_0),
+ GPIO_GROUP(GPIOD_1),
+ GPIO_GROUP(GPIOD_2),
+ GPIO_GROUP(GPIOD_3),
+ GPIO_GROUP(GPIOD_4),
+ GPIO_GROUP(GPIOD_5),
+ GPIO_GROUP(GPIOD_6),
+ GPIO_GROUP(GPIOD_7),
+ GPIO_GROUP(GPIOD_8),
+ GPIO_GROUP(GPIOD_9),
+ GPIO_GROUP(GPIOD_10),
+ GPIO_GROUP(GPIOD_11),
+
+ GPIO_GROUP(GPIOH_0),
+ GPIO_GROUP(GPIOH_1),
+ GPIO_GROUP(GPIOH_2),
+ GPIO_GROUP(GPIOH_3),
+ GPIO_GROUP(GPIOH_4),
+ GPIO_GROUP(GPIOH_5),
+ GPIO_GROUP(GPIOH_6),
+ GPIO_GROUP(GPIOH_7),
+ GPIO_GROUP(GPIOH_8),
+ GPIO_GROUP(GPIOH_9),
+ GPIO_GROUP(GPIOH_10),
+ GPIO_GROUP(GPIOH_11),
+
+ GPIO_GROUP(GPIOX_0),
+ GPIO_GROUP(GPIOX_1),
+ GPIO_GROUP(GPIOX_2),
+ GPIO_GROUP(GPIOX_3),
+ GPIO_GROUP(GPIOX_4),
+ GPIO_GROUP(GPIOX_5),
+ GPIO_GROUP(GPIOX_6),
+ GPIO_GROUP(GPIOX_7),
+ GPIO_GROUP(GPIOX_8),
+ GPIO_GROUP(GPIOX_9),
+ GPIO_GROUP(GPIOX_10),
+ GPIO_GROUP(GPIOX_11),
+ GPIO_GROUP(GPIOX_12),
+ GPIO_GROUP(GPIOX_13),
+ GPIO_GROUP(GPIOX_14),
+ GPIO_GROUP(GPIOX_15),
+ GPIO_GROUP(GPIOX_16),
+ GPIO_GROUP(GPIOX_17),
+ GPIO_GROUP(GPIOX_18),
+ GPIO_GROUP(GPIOX_19),
+
+ GPIO_GROUP(GPIOZ_0),
+ GPIO_GROUP(GPIOZ_1),
+ GPIO_GROUP(GPIOZ_2),
+ GPIO_GROUP(GPIOZ_3),
+ GPIO_GROUP(GPIOZ_4),
+ GPIO_GROUP(GPIOZ_5),
+ GPIO_GROUP(GPIOZ_6),
+ GPIO_GROUP(GPIOZ_7),
+ GPIO_GROUP(GPIOZ_8),
+ GPIO_GROUP(GPIOZ_9),
+ GPIO_GROUP(GPIOZ_10),
+ GPIO_GROUP(GPIOZ_11),
+ GPIO_GROUP(GPIOZ_12),
+
+ GPIO_GROUP(GPIO_TEST_N),
+
+ /* BANK E func1 */
+ GROUP(i2c0_sda, 1),
+ GROUP(i2c0_scl, 1),
+
+ /* BANK E func2 */
+ GROUP(uart_b_tx_e, 2),
+ GROUP(uart_b_rx_e, 2),
+
+ /* BANK E func3 */
+ GROUP(pwm_h, 3),
+ GROUP(pwm_j, 3),
+
+ /* BANK B func1 */
+ GROUP(emmc_nand_d0, 1),
+ GROUP(emmc_nand_d1, 1),
+ GROUP(emmc_nand_d2, 1),
+ GROUP(emmc_nand_d3, 1),
+ GROUP(emmc_nand_d4, 1),
+ GROUP(emmc_nand_d5, 1),
+ GROUP(emmc_nand_d6, 1),
+ GROUP(emmc_nand_d7, 1),
+ GROUP(emmc_clk, 1),
+ GROUP(emmc_rst, 1),
+ GROUP(emmc_cmd, 1),
+ GROUP(emmc_nand_ds, 1),
+
+ /* Bank B func2 */
+ GROUP(nand_wen_clk, 2),
+ GROUP(nand_ale, 2),
+ GROUP(nand_ren_wr, 2),
+ GROUP(nand_cle, 2),
+ GROUP(nand_ce0, 2),
+
+ /* Bank B func3 */
+ GROUP(spif_hold, 3),
+ GROUP(spif_mo, 3),
+ GROUP(spif_mi, 3),
+ GROUP(spif_clk, 3),
+ GROUP(spif_wp, 3),
+ GROUP(spif_cs, 3),
+
+ /* Bank C func1 */
+ GROUP(sdcard_d0_c, 1),
+ GROUP(sdcard_d1_c, 1),
+ GROUP(sdcard_d2_c, 1),
+ GROUP(sdcard_d3_c, 1),
+ GROUP(sdcard_clk_c, 1),
+ GROUP(sdcard_cmd_c, 1),
+ GROUP(sdcard_cd, 1),
+
+ /* Bank C func2 */
+ GROUP(jtag_2_tdo, 2),
+ GROUP(jtag_2_tdi, 2),
+ GROUP(uart_b_rx_c, 2),
+ GROUP(uart_b_tx_c, 2),
+ GROUP(jtag_2_clk, 2),
+ GROUP(jtag_2_tms, 2),
+ GROUP(i2c1_sda_c, 2),
+ GROUP(i2c1_scl_c, 2),
+
+ /* Bank C func3 */
+ GROUP(pdm_din1_c, 3),
+ GROUP(pdm_din0_c, 3),
+ GROUP(i2c4_sda_c, 3),
+ GROUP(i2c4_scl_c, 3),
+ GROUP(pdm_dclk_c, 3),
+ GROUP(iso7816_clk_c, 3),
+ GROUP(iso7816_data_c, 3),
+
+ /* Bank C func4 */
+ GROUP(tdm_d2_c, 4),
+ GROUP(tdm_d3_c, 4),
+ GROUP(tdm_fs1_c, 4),
+ GROUP(mclk_1_c, 4),
+ GROUP(tdm_d4_c, 4),
+ GROUP(tdm_d5_c, 4),
+
+ /* Bank D func1 */
+ GROUP(uart_b_tx_d, 1),
+ GROUP(uart_b_rx_d, 1),
+ GROUP(uart_b_cts_d, 1),
+ GROUP(uart_b_rts_d, 1),
+ GROUP(remote_out, 1),
+ GROUP(remote_in, 1),
+ GROUP(jtag_1_clk, 1),
+ GROUP(jtag_1_tms, 1),
+ GROUP(jtag_1_tdi, 1),
+ GROUP(jtag_1_tdo, 1),
+ GROUP(clk12_24, 1),
+ GROUP(pwm_g_hiz, 1),
+
+ /* Bank D func2 */
+ GROUP(i2c4_sda_d, 2),
+ GROUP(i2c4_scl_d, 2),
+ GROUP(mclk_1_d, 2),
+ GROUP(tdm_sclk1_d, 2),
+ GROUP(tdm_fs1_d, 2),
+ GROUP(tdm_d4_d, 2),
+ GROUP(tdm_d3_d, 2),
+ GROUP(tdm_d2_d, 2),
+ GROUP(pwm_g_d, 2),
+
+ /* Bank D func3 */
+ GROUP(uart_c_tx, 3),
+ GROUP(uart_c_rx, 3),
+ GROUP(pwm_b_d, 3),
+ GROUP(pwm_a_d, 3),
+ GROUP(pwm_c_d, 3),
+ GROUP(pwm_d_d, 3),
+ GROUP(pwm_i_d, 3),
+
+ /* Bank D func4 */
+ GROUP(clk_32k_in, 4),
+ GROUP(pwm_b_hiz, 4),
+ GROUP(pwm_a_hiz, 4),
+ GROUP(pwm_c_hiz, 4),
+ GROUP(pdm_dclk_d, 4),
+ GROUP(pdm_din0_d, 4),
+ GROUP(pdm_din1_d, 4),
+
+ /* Bank D func5 */
+ GROUP(mic_mute_en, 5),
+ GROUP(mic_mute_key, 5),
+ GROUP(i2c1_sda_d, 5),
+ GROUP(i2c1_scl_d, 5),
+ GROUP(i2c2_sda_d, 5),
+ GROUP(i2c2_scl_d, 5),
+
+ /* Bank D func6 */
+ GROUP(gen_clk_d, 6),
+ GROUP(tsin_b_clk_c, 6),
+ GROUP(tsin_b_sop_c, 6),
+ GROUP(tsin_b_valid_c, 6),
+ GROUP(tsin_b_d0_c, 6),
+
+ /* Bank H func1 */
+ GROUP(hdmitx_sda, 1),
+ GROUP(hdmitx_sck, 1),
+ GROUP(hdmitx_hpd_in, 1),
+ GROUP(ao_cec_a, 1),
+ GROUP(spdif_out_h, 1),
+ GROUP(spdif_in, 1),
+ GROUP(i2c1_sda_h, 1),
+ GROUP(i2c1_scl_h, 1),
+ GROUP(i2c2_sda_h8, 1),
+ GROUP(i2c2_scl_h9, 1),
+ GROUP(eth_link_led, 1),
+ GROUP(eth_act_led, 1),
+
+ /* Bank H func2 */
+ GROUP(i2c2_sda_h0, 2),
+ GROUP(i2c2_scl_h1, 2),
+ GROUP(ao_cec_b, 2),
+ GROUP(uart_d_tx_h, 2),
+ GROUP(uart_d_rx_h, 2),
+ GROUP(uart_d_cts_h, 2),
+ GROUP(uart_d_rts_h, 2),
+ GROUP(iso7816_clk_h, 2),
+ GROUP(iso7816_data_h, 2),
+ GROUP(uart_e_tx_h, 2),
+ GROUP(uart_e_rx_h, 2),
+
+ /* Bank H func3 */
+ GROUP(pwm_d_h, 3),
+ GROUP(pwm_i_h, 3),
+ GROUP(pdm_dclk_h, 3),
+ GROUP(pdm_din0_h, 3),
+ GROUP(pdm_din1_h, 3),
+
+ /* Bank H func4 */
+ GROUP(mclk_1_h, 4),
+ GROUP(tdm_sclk1_h, 4),
+ GROUP(tdm_fs1_h, 4),
+ GROUP(tdm_d2_h, 4),
+ GROUP(tdm_d3_h, 4),
+ GROUP(tdm_d4_h, 4),
+
+ /* Bank H func5 */
+ GROUP(spi_a_miso_h, 5),
+ GROUP(spi_a_mosi_h, 5),
+ GROUP(spi_a_clk_h, 5),
+ GROUP(spi_a_ss0_h, 5),
+
+ /* Bank H func6 */
+ GROUP(gen_clk_h, 6),
+ GROUP(tsin_b1_clk, 6),
+ GROUP(tsin_b1_sop, 6),
+ GROUP(tsin_b1_valid, 6),
+ GROUP(tsin_b1_d0, 6),
+
+ /* Bank X func1 */
+ GROUP(sdio_d0, 1),
+ GROUP(sdio_d1, 1),
+ GROUP(sdio_d2, 1),
+ GROUP(sdio_d3, 1),
+ GROUP(sdio_clk, 1),
+ GROUP(sdio_cmd, 1),
+ GROUP(pwm_a_x, 1),
+ GROUP(pwm_f_x, 1),
+ GROUP(tdm_d1, 1),
+ GROUP(tdm_d0, 1),
+ GROUP(tdm_fs0, 1),
+ GROUP(tdm_sclk0, 1),
+ GROUP(uart_a_tx, 1),
+ GROUP(uart_a_rx, 1),
+ GROUP(uart_a_cts, 1),
+ GROUP(uart_a_rts, 1),
+ GROUP(pwm_e_x, 1),
+ GROUP(i2c1_sda_x, 1),
+ GROUP(i2c1_scl_x, 1),
+ GROUP(pwm_b_x, 1),
+
+ /* Bank X func2 */
+ GROUP(pdm_din0_x, 2),
+ GROUP(pdm_din1_x, 2),
+ GROUP(pdm_dclk_x, 2),
+
+ /* Bank X func3 */
+ GROUP(spi_a_mosi_x, 3),
+ GROUP(spi_a_miso_x, 3),
+ GROUP(spi_a_ss0_x, 3),
+ GROUP(spi_a_clk_x, 3),
+
+ /* Bank X func4 */
+ GROUP(pwm_c_x, 4),
+ GROUP(i2c_slave_scl, 4),
+ GROUP(i2c_slave_sda, 4),
+
+ /* Bank X func5 */
+ GROUP(i2c3_sda_x, 5),
+ GROUP(i2c3_scl_x, 5),
+
+ /* Bank Z func1 */
+ GROUP(tdm_fs2, 1),
+ GROUP(tdm_sclk2, 1),
+ GROUP(tdm_d4_z, 1),
+ GROUP(tdm_d5_z, 1),
+ GROUP(tdm_d6, 1),
+ GROUP(tdm_d7, 1),
+ GROUP(mclk_2, 1),
+ GROUP(spdif_out_z, 1),
+ GROUP(dtv_a_if_agc_z10, 1),
+ GROUP(uart_e_tx_z11, 1),
+ GROUP(uart_e_rx_z12, 1),
+
+ /* Bank Z func2 */
+ GROUP(tsin_a_clk, 2),
+ GROUP(tsin_a_sop, 2),
+ GROUP(tsin_a_valid, 2),
+ GROUP(tsin_a_din0, 2),
+ GROUP(dtv_a_if_agc_z6, 2),
+ GROUP(dtv_b_if_agc, 2),
+ GROUP(i2c3_sda_z, 2),
+ GROUP(i2c3_scl_z, 2),
+ GROUP(dtv_a_rf_agc, 2),
+ GROUP(dtv_b_rf_agc, 2),
+
+ /* Bank Z func3 */
+ GROUP(sdcard_d0_z, 3),
+ GROUP(sdcard_d1_z, 3),
+ GROUP(sdcard_d2_z, 3),
+ GROUP(sdcard_d3_z, 3),
+ GROUP(sdcard_clk_z, 3),
+ GROUP(sdcard_cmd_z, 3),
+ GROUP(uart_e_tx_z8, 3),
+ GROUP(uart_e_rx_z9, 3),
+ GROUP(pdm_din1_z, 3),
+ GROUP(pdm_din0_z, 3),
+ GROUP(pdm_dclk_z, 3),
+
+ /* Bank Z func4 */
+ GROUP(spi_a_miso_z, 4),
+ GROUP(spi_a_mosi_z, 4),
+ GROUP(spi_a_clk_z, 4),
+ GROUP(spi_a_ss0_z, 4),
+ GROUP(spi_a_ss1_z, 4),
+ GROUP(spi_a_ss2_z, 4),
+ GROUP(i2c4_scl_z, 4),
+ GROUP(i2c4_sda_z, 4),
+
+ /* Bank Z func5 */
+ GROUP(uart_d_tx_z, 5),
+ GROUP(uart_d_rx_z, 5),
+ GROUP(uart_d_cts_z, 5),
+ GROUP(uart_d_rts_z, 5),
+ GROUP(pwm_g_z, 5),
+ GROUP(pwm_f_z, 5),
+ GROUP(pwm_e_z, 5),
+ GROUP(tsin_b_clk_z, 5),
+ GROUP(tsin_b_sop_z, 5),
+ GROUP(tsin_b_valid_z, 5),
+ GROUP(tsin_b_d0_z, 5),
+
+ /* Bank Z func6 */
+ GROUP(s2_demod_gpio7, 6),
+ GROUP(s2_demod_gpio6, 6),
+ GROUP(s2_demod_gpio5, 6),
+ GROUP(s2_demod_gpio4, 6),
+ GROUP(s2_demod_gpio3, 6),
+ GROUP(s2_demod_gpio2, 6),
+ GROUP(diseqc_out, 6),
+ GROUP(s2_demod_gpio1, 6),
+ GROUP(s2_demod_gpio0, 6),
+
+ /* Bank Z func7 */
+ GROUP(gen_clk_z9, 7),
+ GROUP(gen_clk_z12, 7)
+};
+
+static const char * const gpio_periphs_groups[] = {
+ "GPIOE_0", "GPIOE_1",
+
+ "GPIOB_0", "GPIOB_1", "GPIOB_2", "GPIOB_3", "GPIOB_4", "GPIOB_5",
+ "GPIOB_6", "GPIOB_7", "GPIOB_8", "GPIOB_9", "GPIOB_10", "GPIOB_11",
+ "GPIOB_12", "GPIOB_13",
+
+ "GPIOC_0", "GPIOC_1", "GPIOC_2", "GPIOC_3", "GPIOC_4", "GPIOC_5",
+ "GPIOC_6", "GPIOC_7",
+
+ "GPIOD_0", "GPIOD_1", "GPIOD_2", "GPIOD_3", "GPIOD_4", "GPIOD_5",
+ "GPIOD_6", "GPIOD_7", "GPIOD_8", "GPIOD_9", "GPIOD_10", "GPIOD_11",
+
+ "GPIOH_0", "GPIOH_1", "GPIOH_2", "GPIOH_3", "GPIOH_4", "GPIOH_5",
+ "GPIOH_6", "GPIOH_7", "GPIOH_8", "GPIOH_9", "GPIOH_10", "GPIOH_11",
+
+ "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4", "GPIOX_5",
+ "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+ "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15", "GPIOX_16", "GPIOX_17",
+ "GPIOX_18", "GPIOX_19",
+
+ "GPIOZ_0", "GPIOZ_1", "GPIOZ_2", "GPIOZ_3", "GPIOZ_4", "GPIOZ_5",
+ "GPIOZ_6", "GPIOZ_7", "GPIOZ_8", "GPIOZ_9", "GPIOZ_10",
+ "GPIOZ_11", "GPIOZ_12",
+
+ "GPIO_TEST_N"
+};
+
+static const char * const i2c0_groups[] = {
+ "i2c0_sda", "i2c0_scl"
+};
+
+static const char * const i2c1_groups[] = {
+ "i2c1_sda_c", "i2c1_scl_c",
+ "i2c1_sda_d", "i2c1_scl_d",
+ "i2c1_sda_h", "i2c1_scl_h",
+ "i2c1_sda_x", "i2c1_scl_x"
+};
+
+static const char * const i2c2_groups[] = {
+ "i2c2_sda_d", "i2c2_scl_d",
+ "i2c2_sda_h8", "i2c2_scl_h9",
+ "i2c2_sda_h0", "i2c2_scl_h1"
+};
+
+static const char * const i2c3_groups[] = {
+ "i2c3_sda_x", "i2c3_scl_x",
+ "i2c3_sda_z", "i2c3_scl_z"
+};
+
+static const char * const i2c4_groups[] = {
+ "i2c4_sda_c", "i2c4_scl_c",
+ "i2c4_sda_d", "i2c4_scl_d",
+ "i2c4_scl_z", "i2c4_sda_z"
+};
+
+static const char * const uart_a_groups[] = {
+ "uart_a_tx", "uart_a_rx", "uart_a_cts", "uart_a_rts"
+};
+
+static const char * const uart_b_groups[] = {
+ "uart_b_tx_e", "uart_b_rx_e", "uart_b_rx_c", "uart_b_tx_c",
+ "uart_b_tx_d", "uart_b_rx_d", "uart_b_cts_d", "uart_b_rts_d"
+};
+
+static const char * const uart_c_groups[] = {
+ "uart_c_tx", "uart_c_rx"
+};
+
+static const char * const uart_d_groups[] = {
+ "uart_d_tx_h", "uart_d_rx_h", "uart_d_cts_h", "uart_d_rts_h",
+ "uart_d_tx_z", "uart_d_rx_z", "uart_d_cts_z", "uart_d_rts_z"
+};
+
+static const char * const uart_e_groups[] = {
+ "uart_e_tx_h", "uart_e_rx_h", "uart_e_tx_z11", "uart_e_rx_z12",
+ "uart_e_tx_z8", "uart_e_rx_z9"
+};
+
+static const char * const emmc_groups[] = {
+ "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3",
+ "emmc_nand_d4", "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7",
+ "emmc_clk", "emmc_rst", "emmc_cmd", "emmc_nand_ds"
+};
+
+static const char * const nand_groups[] = {
+ "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3",
+ "emmc_nand_d4", "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7",
+ "nand_wen_clk", "nand_ale", "nand_ren_wr", "nand_cle", "nand_ce0"
+};
+
+static const char * const spif_groups[] = {
+ "spif_hold", "spif_mo", "spif_mi", "spif_clk", "spif_wp",
+ "spif_cs"
+};
+
+static const char * const sdcard_groups[] = {
+ "sdcard_d0_c", "sdcard_d1_c", "sdcard_d2_c", "sdcard_d3_c",
+ "sdcard_clk_c", "sdcard_cmd_c", "sdcard_cd",
+ "sdcard_d0_z", "sdcard_d1_z", "sdcard_d2_z", "sdcard_d3_z",
+ "sdcard_clk_z", "sdcard_cmd_z"
+};
+
+static const char * const jtag_1_groups[] = {
+ "jtag_1_clk", "jtag_1_tms", "jtag_1_tdi", "jtag_1_tdo"
+};
+
+static const char * const jtag_2_groups[] = {
+ "jtag_2_tdo", "jtag_2_tdi", "jtag_2_clk", "jtag_2_tms"
+};
+
+static const char * const pdm_groups[] = {
+ "pdm_din1_c", "pdm_din0_c", "pdm_dclk_c",
+ "pdm_dclk_d", "pdm_din0_d", "pdm_din1_d",
+ "pdm_dclk_h", "pdm_din0_h", "pdm_din1_h",
+ "pdm_din0_x", "pdm_din1_x", "pdm_dclk_x",
+ "pdm_din1_z", "pdm_din0_z", "pdm_dclk_z"
+};
+
+static const char * const iso7816_groups[] = {
+ "iso7816_clk_c", "iso7816_data_c",
+ "iso7816_clk_h", "iso7816_data_h"
+};
+
+static const char * const tdm_groups[] = {
+ "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
+ "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
+ "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
+ "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
+ "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
+};
+
+static const char * const mclk_groups[] = {
+ "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
+
+};
+
+static const char * const remote_out_groups[] = {
+ "remote_out"
+};
+
+static const char * const remote_in_groups[] = {
+ "remote_in"
+};
+
+static const char * const clk12_24_groups[] = {
+ "clk12_24"
+};
+
+static const char * const clk_32k_in_groups[] = {
+ "clk_32k_in"
+};
+
+static const char * const pwm_a_hiz_groups[] = {
+ "pwm_a_hiz"
+};
+
+static const char * const pwm_b_hiz_groups[] = {
+ "pwm_b_hiz"
+};
+
+static const char * const pwm_c_hiz_groups[] = {
+ "pwm_c_hiz"
+};
+
+static const char * const pwm_g_hiz_groups[] = {
+ "pwm_g_hiz"
+};
+
+static const char * const pwm_a_groups[] = {
+ "pwm_a_d"
+};
+
+static const char * const pwm_b_groups[] = {
+ "pwm_b_d", "pwm_b_x"
+
+};
+
+static const char * const pwm_c_groups[] = {
+ "pwm_c_d", "pwm_c_x"
+};
+
+static const char * const pwm_d_groups[] = {
+ "pwm_d_d", "pwm_d_h"
+};
+
+static const char * const pwm_e_groups[] = {
+ "pwm_e_x", "pwm_e_z"
+};
+
+static const char * const pwm_f_groups[] = {
+ "pwm_f_x", "pwm_f_z"
+};
+
+static const char * const pwm_g_groups[] = {
+ "pwm_g_d", "pwm_g_z"
+};
+
+static const char * const pwm_h_groups[] = {
+ "pwm_h",
+};
+
+static const char * const pwm_i_groups[] = {
+ "pwm_i_d", "pwm_i_h"
+};
+
+static const char * const pwm_j_groups[] = {
+ "pwm_j",
+};
+
+static const char * const mic_mute_groups[] = {
+ "mic_mute_en", "mic_mute_key"
+};
+
+static const char * const hdmitx_groups[] = {
+ "hdmitx_sda", "hdmitx_sck", "hdmitx_hpd_in"
+};
+
+static const char * const ao_cec_a_groups[] = {
+ "ao_cec_a"
+};
+
+static const char * const ao_cec_b_groups[] = {
+ "ao_cec_b"
+};
+
+static const char * const spdif_out_groups[] = {
+ "spdif_out_h", "spdif_out_z"
+};
+
+static const char * const spdif_in_groups[] = {
+ "spdif_in"
+};
+
+static const char * const eth_groups[] = {
+ "eth_link_led", "eth_act_led"
+};
+
+static const char * const spi_a_groups[] = {
+ "spi_a_miso_h", "spi_a_mosi_h", "spi_a_clk_h", "spi_a_ss0_h",
+
+ "spi_a_mosi_x", "spi_a_miso_x", "spi_a_ss0_x", "spi_a_clk_x",
+
+ "spi_a_miso_z", "spi_a_mosi_z", "spi_a_clk_z", "spi_a_ss0_z",
+ "spi_a_ss1_z", "spi_a_ss2_z"
+};
+
+static const char * const gen_clk_groups[] = {
+ "gen_clk_h", "gen_clk_z9", "gen_clk_z12"
+};
+
+static const char * const sdio_groups[] = {
+ "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", "sdio_clk", "sdio_cmd"
+};
+
+static const char * const i2c_slave_groups[] = {
+ "i2c_slave_scl", "i2c_slave_sda"
+};
+
+static const char * const dtv_groups[] = {
+ "dtv_a_if_agc_z10", "dtv_a_if_agc_z6", "dtv_b_if_agc",
+ "dtv_a_rf_agc", "dtv_b_rf_agc"
+};
+
+static const char * const tsin_a_groups[] = {
+ "tsin_a_clk", "tsin_a_sop", "tsin_a_valid", "tsin_a_din0"
+};
+
+static const char * const tsin_b_groups[] = {
+ "tsin_b_clk_c", "tsin_b_sop_c", "tsin_b_valid_c", "tsin_b_d0_c",
+ "tsin_b_clk_z", "tsin_b_sop_z", "tsin_b_valid_z", "tsin_b_d0_z"
+};
+
+static const char * const tsin_b1_groups[] = {
+ "tsin_b1_clk", "tsin_b1_sop", "tsin_b1_valid", "tsin_b1_d0"
+};
+
+static const char * const diseqc_out_groups[] = {
+ "diseqc_out"
+};
+
+static const char * const s2_demod_groups[] = {
+ "s2_demod_gpio7", "s2_demod_gpio6", "s2_demod_gpio5", "s2_demod_gpio4",
+ "s2_demod_gpio3", "s2_demod_gpio2", "s2_demod_gpio1", "s2_demod_gpio0"
+};
+
+static struct meson_pmx_func meson_s4_periphs_functions[] = {
+ FUNCTION(gpio_periphs),
+ FUNCTION(i2c0),
+ FUNCTION(i2c1),
+ FUNCTION(i2c2),
+ FUNCTION(i2c3),
+ FUNCTION(i2c4),
+ FUNCTION(uart_a),
+ FUNCTION(uart_b),
+ FUNCTION(uart_c),
+ FUNCTION(uart_d),
+ FUNCTION(uart_e),
+ FUNCTION(emmc),
+ FUNCTION(nand),
+ FUNCTION(spif),
+ FUNCTION(sdcard),
+ FUNCTION(jtag_1),
+ FUNCTION(jtag_2),
+ FUNCTION(pdm),
+ FUNCTION(iso7816),
+ FUNCTION(tdm),
+ FUNCTION(mclk),
+ FUNCTION(remote_out),
+ FUNCTION(remote_in),
+ FUNCTION(clk12_24),
+ FUNCTION(clk_32k_in),
+ FUNCTION(pwm_a_hiz),
+ FUNCTION(pwm_b_hiz),
+ FUNCTION(pwm_c_hiz),
+ FUNCTION(pwm_g_hiz),
+ FUNCTION(pwm_a),
+ FUNCTION(pwm_b),
+ FUNCTION(pwm_c),
+ FUNCTION(pwm_d),
+ FUNCTION(pwm_e),
+ FUNCTION(pwm_f),
+ FUNCTION(pwm_g),
+ FUNCTION(pwm_h),
+ FUNCTION(pwm_i),
+ FUNCTION(pwm_j),
+ FUNCTION(mic_mute),
+ FUNCTION(hdmitx),
+ FUNCTION(ao_cec_a),
+ FUNCTION(ao_cec_b),
+ FUNCTION(spdif_out),
+ FUNCTION(spdif_in),
+ FUNCTION(eth),
+ FUNCTION(spi_a),
+ FUNCTION(gen_clk),
+ FUNCTION(sdio),
+ FUNCTION(i2c_slave),
+ FUNCTION(dtv),
+ FUNCTION(tsin_a),
+ FUNCTION(tsin_b),
+ FUNCTION(tsin_b1),
+ FUNCTION(diseqc_out),
+ FUNCTION(s2_demod)
+};
+
+static struct meson_bank meson_s4_periphs_banks[] = {
+ /* name first last irq pullen pull dir out in */
+ BANK_DS("B", GPIOB_0, GPIOB_13, 0, 13,
+ 0x63, 0, 0x64, 0, 0x62, 0, 0x61, 0, 0x60, 0, 0x67, 0),
+ BANK_DS("C", GPIOC_0, GPIOC_7, 14, 21,
+ 0x53, 0, 0x54, 0, 0x52, 0, 0x51, 0, 0x50, 0, 0x57, 0),
+ BANK_DS("E", GPIOE_0, GPIOE_1, 22, 23,
+ 0x43, 0, 0x44, 0, 0x42, 0, 0x41, 0, 0x40, 0, 0x47, 0),
+ BANK_DS("D", GPIOD_0, GPIOD_11, 24, 35,
+ 0x33, 0, 0x34, 0, 0x32, 0, 0x31, 0, 0x30, 0, 0x37, 0),
+ BANK_DS("H", GPIOH_0, GPIOH_11, 36, 47,
+ 0x23, 0, 0x24, 0, 0x22, 0, 0x21, 0, 0x20, 0, 0x27, 0),
+ BANK_DS("X", GPIOX_0, GPIOX_19, 48, 67,
+ 0x13, 0, 0x14, 0, 0x12, 0, 0x11, 0, 0x10, 0, 0x17, 0),
+ BANK_DS("Z", GPIOZ_0, GPIOZ_12, 68, 80,
+ 0x03, 0, 0x04, 0, 0x02, 0, 0x01, 0, 0x00, 0, 0x07, 0),
+ BANK_DS("TEST_N", GPIO_TEST_N, GPIO_TEST_N, -1, -1,
+ 0x83, 0, 0x84, 0, 0x82, 0, 0x81, 0, 0x80, 0, 0x87, 0),
+};
+
+static struct meson_pmx_bank meson_s4_periphs_pmx_banks[] = {
+ /*name first lask reg offset*/
+ BANK_PMX("B", GPIOB_0, GPIOB_13, 0x00, 0),
+ BANK_PMX("C", GPIOC_0, GPIOC_7, 0x9, 0),
+ BANK_PMX("E", GPIOE_0, GPIOE_1, 0x12, 0),
+ BANK_PMX("D", GPIOD_0, GPIOD_11, 0x10, 0),
+ BANK_PMX("H", GPIOH_0, GPIOH_11, 0xb, 0),
+ BANK_PMX("X", GPIOX_0, GPIOX_19, 0x3, 0),
+ BANK_PMX("Z", GPIOZ_0, GPIOZ_12, 0x6, 0),
+ BANK_PMX("TEST_N", GPIO_TEST_N, GPIO_TEST_N, 0xf, 0),
+};
+
+static struct meson_axg_pmx_data meson_s4_periphs_pmx_banks_data = {
+ .pmx_banks = meson_s4_periphs_pmx_banks,
+ .num_pmx_banks = ARRAY_SIZE(meson_s4_periphs_pmx_banks),
+};
+
+static struct meson_pinctrl_data meson_s4_periphs_pinctrl_data = {
+ .name = "periphs-banks",
+ .pins = meson_s4_periphs_pins,
+ .groups = meson_s4_periphs_groups,
+ .funcs = meson_s4_periphs_functions,
+ .banks = meson_s4_periphs_banks,
+ .num_pins = ARRAY_SIZE(meson_s4_periphs_pins),
+ .num_groups = ARRAY_SIZE(meson_s4_periphs_groups),
+ .num_funcs = ARRAY_SIZE(meson_s4_periphs_functions),
+ .num_banks = ARRAY_SIZE(meson_s4_periphs_banks),
+ .pmx_ops = &meson_axg_pmx_ops,
+ .pmx_data = &meson_s4_periphs_pmx_banks_data,
+ .parse_dt = &meson_a1_parse_dt_extra,
+};
+
+static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson-s4-periphs-pinctrl",
+ .data = &meson_s4_periphs_pinctrl_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, meson_s4_pinctrl_dt_match);
+
+static struct platform_driver meson_s4_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson-s4-pinctrl",
+ .of_match_table = meson_s4_pinctrl_dt_match,
+ },
+};
+
+module_platform_driver(meson_s4_pinctrl_driver);
+MODULE_LICENSE("Dual BSD/GPL");
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-14 2:21 ` Qianggui Song
0 siblings, 0 replies; 30+ messages in thread
From: Qianggui Song @ 2021-12-14 2:21 UTC (permalink / raw)
To: Linus Walleij
Cc: Qianggui Song, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland, linux-arm-kernel,
linux-amlogic, linux-kernel, linux-gpio
Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
same register laytout as the previous Meson-A1.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
drivers/pinctrl/meson/Kconfig | 6 +
drivers/pinctrl/meson/Makefile | 1 +
drivers/pinctrl/meson/pinctrl-meson-s4.c | 1229 ++++++++++++++++++++++
3 files changed, 1236 insertions(+)
create mode 100644 drivers/pinctrl/meson/pinctrl-meson-s4.c
diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig
index b2855e341a75..d1955c65b4b6 100644
--- a/drivers/pinctrl/meson/Kconfig
+++ b/drivers/pinctrl/meson/Kconfig
@@ -61,4 +61,10 @@ config PINCTRL_MESON_A1
select PINCTRL_MESON_AXG_PMX
default y
+config PINCTRL_MESON_S4
+ tristate "Meson s4 Soc pinctrl driver"
+ depends on ARM64
+ select PINCTRL_MESON_AXG_PMX
+ default y
+
endif
diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile
index 1a5bffe953f9..694f0596bfbc 100644
--- a/drivers/pinctrl/meson/Makefile
+++ b/drivers/pinctrl/meson/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_MESON_AXG_PMX) += pinctrl-meson-axg-pmx.o
obj-$(CONFIG_PINCTRL_MESON_AXG) += pinctrl-meson-axg.o
obj-$(CONFIG_PINCTRL_MESON_G12A) += pinctrl-meson-g12a.o
obj-$(CONFIG_PINCTRL_MESON_A1) += pinctrl-meson-a1.o
+obj-$(CONFIG_PINCTRL_MESON_S4) += pinctrl-meson-s4.o
diff --git a/drivers/pinctrl/meson/pinctrl-meson-s4.c b/drivers/pinctrl/meson/pinctrl-meson-s4.c
new file mode 100644
index 000000000000..be26ac17847a
--- /dev/null
+++ b/drivers/pinctrl/meson/pinctrl-meson-s4.c
@@ -0,0 +1,1229 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Pin controller and GPIO driver for Amlogic Meson S4 SoC.
+ *
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song@amlogic.com>
+ */
+
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include "pinctrl-meson.h"
+#include "pinctrl-meson-axg-pmx.h"
+
+static const struct pinctrl_pin_desc meson_s4_periphs_pins[] = {
+ MESON_PIN(GPIOE_0),
+ MESON_PIN(GPIOE_1),
+
+ MESON_PIN(GPIOB_0),
+ MESON_PIN(GPIOB_1),
+ MESON_PIN(GPIOB_2),
+ MESON_PIN(GPIOB_3),
+ MESON_PIN(GPIOB_4),
+ MESON_PIN(GPIOB_5),
+ MESON_PIN(GPIOB_6),
+ MESON_PIN(GPIOB_7),
+ MESON_PIN(GPIOB_8),
+ MESON_PIN(GPIOB_9),
+ MESON_PIN(GPIOB_10),
+ MESON_PIN(GPIOB_11),
+ MESON_PIN(GPIOB_12),
+ MESON_PIN(GPIOB_13),
+
+ MESON_PIN(GPIOC_0),
+ MESON_PIN(GPIOC_1),
+ MESON_PIN(GPIOC_2),
+ MESON_PIN(GPIOC_3),
+ MESON_PIN(GPIOC_4),
+ MESON_PIN(GPIOC_5),
+ MESON_PIN(GPIOC_6),
+ MESON_PIN(GPIOC_7),
+
+ MESON_PIN(GPIOD_0),
+ MESON_PIN(GPIOD_1),
+ MESON_PIN(GPIOD_2),
+ MESON_PIN(GPIOD_3),
+ MESON_PIN(GPIOD_4),
+ MESON_PIN(GPIOD_5),
+ MESON_PIN(GPIOD_6),
+ MESON_PIN(GPIOD_7),
+ MESON_PIN(GPIOD_8),
+ MESON_PIN(GPIOD_9),
+ MESON_PIN(GPIOD_10),
+ MESON_PIN(GPIOD_11),
+
+ MESON_PIN(GPIOH_0),
+ MESON_PIN(GPIOH_1),
+ MESON_PIN(GPIOH_2),
+ MESON_PIN(GPIOH_3),
+ MESON_PIN(GPIOH_4),
+ MESON_PIN(GPIOH_5),
+ MESON_PIN(GPIOH_6),
+ MESON_PIN(GPIOH_7),
+ MESON_PIN(GPIOH_8),
+ MESON_PIN(GPIOH_9),
+ MESON_PIN(GPIOH_10),
+ MESON_PIN(GPIOH_11),
+
+ MESON_PIN(GPIOX_0),
+ MESON_PIN(GPIOX_1),
+ MESON_PIN(GPIOX_2),
+ MESON_PIN(GPIOX_3),
+ MESON_PIN(GPIOX_4),
+ MESON_PIN(GPIOX_5),
+ MESON_PIN(GPIOX_6),
+ MESON_PIN(GPIOX_7),
+ MESON_PIN(GPIOX_8),
+ MESON_PIN(GPIOX_9),
+ MESON_PIN(GPIOX_10),
+ MESON_PIN(GPIOX_11),
+ MESON_PIN(GPIOX_12),
+ MESON_PIN(GPIOX_13),
+ MESON_PIN(GPIOX_14),
+ MESON_PIN(GPIOX_15),
+ MESON_PIN(GPIOX_16),
+ MESON_PIN(GPIOX_17),
+ MESON_PIN(GPIOX_18),
+ MESON_PIN(GPIOX_19),
+
+ MESON_PIN(GPIOZ_0),
+ MESON_PIN(GPIOZ_1),
+ MESON_PIN(GPIOZ_2),
+ MESON_PIN(GPIOZ_3),
+ MESON_PIN(GPIOZ_4),
+ MESON_PIN(GPIOZ_5),
+ MESON_PIN(GPIOZ_6),
+ MESON_PIN(GPIOZ_7),
+ MESON_PIN(GPIOZ_8),
+ MESON_PIN(GPIOZ_9),
+ MESON_PIN(GPIOZ_10),
+ MESON_PIN(GPIOZ_11),
+ MESON_PIN(GPIOZ_12),
+
+ MESON_PIN(GPIO_TEST_N)
+};
+
+/* BANK E func1 */
+static const unsigned int i2c0_sda_pins[] = { GPIOE_0 };
+static const unsigned int i2c0_scl_pins[] = { GPIOE_1 };
+
+/* BANK E func2 */
+static const unsigned int uart_b_tx_e_pins[] = { GPIOE_0 };
+static const unsigned int uart_b_rx_e_pins[] = { GPIOE_1 };
+
+/* BANK E func3 */
+static const unsigned int pwm_h_pins[] = { GPIOE_0 };
+static const unsigned int pwm_j_pins[] = { GPIOE_1 };
+
+/* BANK B func1 */
+static const unsigned int emmc_nand_d0_pins[] = { GPIOB_0 };
+static const unsigned int emmc_nand_d1_pins[] = { GPIOB_1 };
+static const unsigned int emmc_nand_d2_pins[] = { GPIOB_2 };
+static const unsigned int emmc_nand_d3_pins[] = { GPIOB_3 };
+static const unsigned int emmc_nand_d4_pins[] = { GPIOB_4 };
+static const unsigned int emmc_nand_d5_pins[] = { GPIOB_5 };
+static const unsigned int emmc_nand_d6_pins[] = { GPIOB_6 };
+static const unsigned int emmc_nand_d7_pins[] = { GPIOB_7 };
+static const unsigned int emmc_clk_pins[] = { GPIOB_8 };
+static const unsigned int emmc_rst_pins[] = { GPIOB_9 };
+static const unsigned int emmc_cmd_pins[] = { GPIOB_10 };
+static const unsigned int emmc_nand_ds_pins[] = { GPIOB_11 };
+
+/* Bank B func2 */
+static const unsigned int nand_wen_clk_pins[] = { GPIOB_8 };
+static const unsigned int nand_ale_pins[] = { GPIOB_9 };
+static const unsigned int nand_ren_wr_pins[] = { GPIOB_10 };
+static const unsigned int nand_cle_pins[] = { GPIOB_11 };
+static const unsigned int nand_ce0_pins[] = { GPIOB_12 };
+
+/* Bank B func3 */
+static const unsigned int spif_hold_pins[] = { GPIOB_3 };
+static const unsigned int spif_mo_pins[] = { GPIOB_4 };
+static const unsigned int spif_mi_pins[] = { GPIOB_5 };
+static const unsigned int spif_clk_pins[] = { GPIOB_6 };
+static const unsigned int spif_wp_pins[] = { GPIOB_7 };
+static const unsigned int spif_cs_pins[] = { GPIOB_13 };
+
+/* Bank C func1 */
+static const unsigned int sdcard_d0_c_pins[] = { GPIOC_0 };
+static const unsigned int sdcard_d1_c_pins[] = { GPIOC_1 };
+static const unsigned int sdcard_d2_c_pins[] = { GPIOC_2 };
+static const unsigned int sdcard_d3_c_pins[] = { GPIOC_3 };
+static const unsigned int sdcard_clk_c_pins[] = { GPIOC_4 };
+static const unsigned int sdcard_cmd_c_pins[] = { GPIOC_5 };
+static const unsigned int sdcard_cd_pins[] = { GPIOC_6 };
+
+/* Bank C func2 */
+static const unsigned int jtag_2_tdo_pins[] = { GPIOC_0 };
+static const unsigned int jtag_2_tdi_pins[] = { GPIOC_1 };
+static const unsigned int uart_b_rx_c_pins[] = { GPIOC_2 };
+static const unsigned int uart_b_tx_c_pins[] = { GPIOC_3 };
+static const unsigned int jtag_2_clk_pins[] = { GPIOC_4 };
+static const unsigned int jtag_2_tms_pins[] = { GPIOC_5 };
+static const unsigned int i2c1_sda_c_pins[] = { GPIOC_6 };
+static const unsigned int i2c1_scl_c_pins[] = { GPIOC_7 };
+
+/* Bank C func3 */
+static const unsigned int pdm_din1_c_pins[] = { GPIOC_0 };
+static const unsigned int pdm_din0_c_pins[] = { GPIOC_1 };
+static const unsigned int i2c4_sda_c_pins[] = { GPIOC_2 };
+static const unsigned int i2c4_scl_c_pins[] = { GPIOC_3 };
+static const unsigned int pdm_dclk_c_pins[] = { GPIOC_4 };
+static const unsigned int iso7816_clk_c_pins[] = { GPIOC_5 };
+static const unsigned int iso7816_data_c_pins[] = { GPIOC_6 };
+
+/* Bank C func4 */
+static const unsigned int tdm_d2_c_pins[] = { GPIOC_0 };
+static const unsigned int tdm_d3_c_pins[] = { GPIOC_1 };
+static const unsigned int tdm_fs1_c_pins[] = { GPIOC_2 };
+static const unsigned int tdm_sclk1_c_pins[] = { GPIOC_3 };
+static const unsigned int mclk_1_c_pins[] = { GPIOC_4 };
+static const unsigned int tdm_d4_c_pins[] = { GPIOC_5 };
+static const unsigned int tdm_d5_c_pins[] = { GPIOC_6 };
+
+/* Bank D func1 */
+static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
+static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
+static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
+static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
+static const unsigned int remote_out_pins[] = { GPIOD_4 };
+static const unsigned int remote_in_pins[] = { GPIOD_5 };
+static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
+static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
+static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
+static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
+static const unsigned int clk12_24_pins[] = { GPIOD_10 };
+static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
+
+/* Bank D func2 */
+static const unsigned int i2c4_sda_d_pins[] = { GPIOD_2 };
+static const unsigned int i2c4_scl_d_pins[] = { GPIOD_3 };
+static const unsigned int mclk_1_d_pins[] = { GPIOD_4 };
+static const unsigned int tdm_sclk1_d_pins[] = { GPIOD_6 };
+static const unsigned int tdm_fs1_d_pins[] = { GPIOD_7 };
+static const unsigned int tdm_d4_d_pins[] = { GPIOD_8 };
+static const unsigned int tdm_d3_d_pins[] = { GPIOD_9 };
+static const unsigned int tdm_d2_d_pins[] = { GPIOD_10 };
+static const unsigned int pwm_g_d_pins[] = { GPIOD_11 };
+
+/* Bank D func3 */
+static const unsigned int uart_c_tx_pins[] = { GPIOD_2 };
+static const unsigned int uart_c_rx_pins[] = { GPIOD_3 };
+static const unsigned int pwm_b_d_pins[] = { GPIOD_4 };
+static const unsigned int pwm_a_d_pins[] = { GPIOD_6 };
+static const unsigned int pwm_c_d_pins[] = { GPIOD_7 };
+static const unsigned int pwm_d_d_pins[] = { GPIOD_8 };
+static const unsigned int pwm_i_d_pins[] = { GPIOD_9 };
+
+/* Bank D func4 */
+static const unsigned int clk_32k_in_pins[] = { GPIOD_2 };
+static const unsigned int pwm_b_hiz_pins[] = { GPIOD_4 };
+static const unsigned int pwm_a_hiz_pins[] = { GPIOD_6 };
+static const unsigned int pwm_c_hiz_pins[] = { GPIOD_7 };
+static const unsigned int pdm_dclk_d_pins[] = { GPIOD_8 };
+static const unsigned int pdm_din0_d_pins[] = { GPIOD_9 };
+static const unsigned int pdm_din1_d_pins[] = { GPIOD_10 };
+
+/* Bank D func5 */
+static const unsigned int mic_mute_en_pins[] = { GPIOD_2 };
+static const unsigned int mic_mute_key_pins[] = { GPIOD_3 };
+static const unsigned int i2c1_sda_d_pins[] = { GPIOD_6 };
+static const unsigned int i2c1_scl_d_pins[] = { GPIOD_7 };
+static const unsigned int i2c2_sda_d_pins[] = { GPIOD_10 };
+static const unsigned int i2c2_scl_d_pins[] = { GPIOD_11 };
+
+/* Bank D func6 */
+static const unsigned int gen_clk_d_pins[] = { GPIOD_10 };
+static const unsigned int tsin_b_clk_c_pins[] = { GPIOD_6 };
+static const unsigned int tsin_b_sop_c_pins[] = { GPIOD_7 };
+static const unsigned int tsin_b_valid_c_pins[] = { GPIOD_8 };
+static const unsigned int tsin_b_d0_c_pins[] = { GPIOD_9 };
+
+/* Bank H func1 */
+static const unsigned int hdmitx_sda_pins[] = { GPIOH_0 };
+static const unsigned int hdmitx_sck_pins[] = { GPIOH_1 };
+static const unsigned int hdmitx_hpd_in_pins[] = { GPIOH_2 };
+static const unsigned int ao_cec_a_pins[] = { GPIOH_3 };
+static const unsigned int spdif_out_h_pins[] = { GPIOH_4 };
+static const unsigned int spdif_in_pins[] = { GPIOH_5 };
+static const unsigned int i2c1_sda_h_pins[] = { GPIOH_6 };
+static const unsigned int i2c1_scl_h_pins[] = { GPIOH_7 };
+static const unsigned int i2c2_sda_h8_pins[] = { GPIOH_8 };
+static const unsigned int i2c2_scl_h9_pins[] = { GPIOH_9 };
+static const unsigned int eth_link_led_pins[] = { GPIOH_10 };
+static const unsigned int eth_act_led_pins[] = { GPIOH_11 };
+
+/* Bank H func2 */
+static const unsigned int i2c2_sda_h0_pins[] = { GPIOH_0 };
+static const unsigned int i2c2_scl_h1_pins[] = { GPIOH_1 };
+static const unsigned int ao_cec_b_pins[] = { GPIOH_3 };
+static const unsigned int uart_d_tx_h_pins[] = { GPIOH_4 };
+static const unsigned int uart_d_rx_h_pins[] = { GPIOH_5 };
+static const unsigned int uart_d_cts_h_pins[] = { GPIOH_6 };
+static const unsigned int uart_d_rts_h_pins[] = { GPIOH_7 };
+static const unsigned int iso7816_clk_h_pins[] = { GPIOH_8 };
+static const unsigned int iso7816_data_h_pins[] = { GPIOH_9 };
+static const unsigned int uart_e_tx_h_pins[] = { GPIOH_10 };
+static const unsigned int uart_e_rx_h_pins[] = { GPIOH_11 };
+
+/* Bank H func3 */
+static const unsigned int pwm_d_h_pins[] = { GPIOH_6 };
+static const unsigned int pwm_i_h_pins[] = { GPIOH_7 };
+static const unsigned int pdm_dclk_h_pins[] = { GPIOH_8 };
+static const unsigned int pdm_din0_h_pins[] = { GPIOH_9 };
+static const unsigned int pdm_din1_h_pins[] = { GPIOH_10 };
+
+/* Bank H func4 */
+static const unsigned int mclk_1_h_pins[] = { GPIOH_4 };
+static const unsigned int tdm_sclk1_h_pins[] = { GPIOH_5 };
+static const unsigned int tdm_fs1_h_pins[] = { GPIOH_6 };
+static const unsigned int tdm_d2_h_pins[] = { GPIOH_7 };
+static const unsigned int tdm_d3_h_pins[] = { GPIOH_8 };
+static const unsigned int tdm_d4_h_pins[] = { GPIOH_9 };
+
+/* Bank H func5 */
+static const unsigned int spi_a_miso_h_pins[] = { GPIOH_4 };
+static const unsigned int spi_a_mosi_h_pins[] = { GPIOH_5 };
+static const unsigned int spi_a_clk_h_pins[] = { GPIOH_6 };
+static const unsigned int spi_a_ss0_h_pins[] = { GPIOH_7 };
+
+/* Bank H func6 */
+static const unsigned int gen_clk_h_pins[] = { GPIOH_11 };
+static const unsigned int tsin_b1_clk_pins[] = { GPIOH_4 };
+static const unsigned int tsin_b1_sop_pins[] = { GPIOH_5 };
+static const unsigned int tsin_b1_valid_pins[] = { GPIOH_6 };
+static const unsigned int tsin_b1_d0_pins[] = { GPIOH_7 };
+
+/* Bank X func1 */
+static const unsigned int sdio_d0_pins[] = { GPIOX_0 };
+static const unsigned int sdio_d1_pins[] = { GPIOX_1 };
+static const unsigned int sdio_d2_pins[] = { GPIOX_2 };
+static const unsigned int sdio_d3_pins[] = { GPIOX_3 };
+static const unsigned int sdio_clk_pins[] = { GPIOX_4 };
+static const unsigned int sdio_cmd_pins[] = { GPIOX_5 };
+static const unsigned int pwm_a_x_pins[] = { GPIOX_6 };
+static const unsigned int pwm_f_x_pins[] = { GPIOX_7 };
+static const unsigned int tdm_d1_pins[] = { GPIOX_8 };
+static const unsigned int tdm_d0_pins[] = { GPIOX_9 };
+static const unsigned int tdm_fs0_pins[] = { GPIOX_10 };
+static const unsigned int tdm_sclk0_pins[] = { GPIOX_11 };
+static const unsigned int uart_a_tx_pins[] = { GPIOX_12 };
+static const unsigned int uart_a_rx_pins[] = { GPIOX_13 };
+static const unsigned int uart_a_cts_pins[] = { GPIOX_14 };
+static const unsigned int uart_a_rts_pins[] = { GPIOX_15 };
+static const unsigned int pwm_e_x_pins[] = { GPIOX_16 };
+static const unsigned int i2c1_sda_x_pins[] = { GPIOX_17 };
+static const unsigned int i2c1_scl_x_pins[] = { GPIOX_18 };
+static const unsigned int pwm_b_x_pins[] = { GPIOX_19 };
+
+/* Bank X func2 */
+static const unsigned int pdm_din0_x_pins[] = { GPIOX_8 };
+static const unsigned int pdm_din1_x_pins[] = { GPIOX_9 };
+static const unsigned int pdm_dclk_x_pins[] = { GPIOX_11 };
+
+/* Bank X func3 */
+static const unsigned int spi_a_mosi_x_pins[] = { GPIOX_8 };
+static const unsigned int spi_a_miso_x_pins[] = { GPIOX_9 };
+static const unsigned int spi_a_ss0_x_pins[] = { GPIOX_10 };
+static const unsigned int spi_a_clk_x_pins[] = { GPIOX_11 };
+
+/* Bank X func4 */
+static const unsigned int pwm_c_x_pins[] = { GPIOX_8 };
+static const unsigned int i2c_slave_scl_pins[] = { GPIOX_10 };
+static const unsigned int i2c_slave_sda_pins[] = { GPIOX_11 };
+
+/* Bank X func5 */
+static const unsigned int i2c3_sda_x_pins[] = { GPIOX_10 };
+static const unsigned int i2c3_scl_x_pins[] = { GPIOX_11 };
+
+/* Bank Z func1 */
+static const unsigned int tdm_fs2_pins[] = { GPIOZ_0 };
+static const unsigned int tdm_sclk2_pins[] = { GPIOZ_1 };
+static const unsigned int tdm_d4_z_pins[] = { GPIOZ_2 };
+static const unsigned int tdm_d5_z_pins[] = { GPIOZ_3 };
+static const unsigned int tdm_d6_pins[] = { GPIOZ_4 };
+static const unsigned int tdm_d7_pins[] = { GPIOZ_5 };
+static const unsigned int mclk_2_pins[] = { GPIOZ_6 };
+static const unsigned int spdif_out_z_pins[] = { GPIOZ_9 };
+static const unsigned int dtv_a_if_agc_z10_pins[] = { GPIOZ_10 };
+static const unsigned int uart_e_tx_z11_pins[] = { GPIOZ_11 };
+static const unsigned int uart_e_rx_z12_pins[] = { GPIOZ_12 };
+
+/* Bank Z func2 */
+static const unsigned int tsin_a_clk_pins[] = { GPIOZ_0 };
+static const unsigned int tsin_a_sop_pins[] = { GPIOZ_1 };
+static const unsigned int tsin_a_valid_pins[] = { GPIOZ_2 };
+static const unsigned int tsin_a_din0_pins[] = { GPIOZ_3 };
+static const unsigned int dtv_a_if_agc_z6_pins[] = { GPIOZ_6 };
+static const unsigned int dtv_b_if_agc_pins[] = { GPIOZ_7 };
+static const unsigned int i2c3_sda_z_pins[] = { GPIOZ_8 };
+static const unsigned int i2c3_scl_z_pins[] = { GPIOZ_9 };
+static const unsigned int dtv_a_rf_agc_pins[] = { GPIOZ_10 };
+static const unsigned int dtv_b_rf_agc_pins[] = { GPIOZ_11 };
+
+/* Bank Z func3 */
+static const unsigned int sdcard_d0_z_pins[] = { GPIOZ_0 };
+static const unsigned int sdcard_d1_z_pins[] = { GPIOZ_1 };
+static const unsigned int sdcard_d2_z_pins[] = { GPIOZ_2 };
+static const unsigned int sdcard_d3_z_pins[] = { GPIOZ_3 };
+static const unsigned int sdcard_clk_z_pins[] = { GPIOZ_4 };
+static const unsigned int sdcard_cmd_z_pins[] = { GPIOZ_5 };
+static const unsigned int uart_e_tx_z8_pins[] = { GPIOZ_8 };
+static const unsigned int uart_e_rx_z9_pins[] = { GPIOZ_9 };
+static const unsigned int pdm_din1_z_pins[] = { GPIOZ_10 };
+static const unsigned int pdm_din0_z_pins[] = { GPIOZ_11 };
+static const unsigned int pdm_dclk_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func4 */
+static const unsigned int spi_a_miso_z_pins[] = { GPIOZ_0 };
+static const unsigned int spi_a_mosi_z_pins[] = { GPIOZ_1 };
+static const unsigned int spi_a_clk_z_pins[] = { GPIOZ_2 };
+static const unsigned int spi_a_ss0_z_pins[] = { GPIOZ_3 };
+static const unsigned int spi_a_ss1_z_pins[] = { GPIOZ_4 };
+static const unsigned int spi_a_ss2_z_pins[] = { GPIOZ_5 };
+static const unsigned int i2c4_scl_z_pins[] = { GPIOZ_11 };
+static const unsigned int i2c4_sda_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func5 */
+static const unsigned int uart_d_tx_z_pins[] = { GPIOZ_0 };
+static const unsigned int uart_d_rx_z_pins[] = { GPIOZ_1 };
+static const unsigned int uart_d_cts_z_pins[] = { GPIOZ_2 };
+static const unsigned int uart_d_rts_z_pins[] = { GPIOZ_3 };
+static const unsigned int pwm_g_z_pins[] = { GPIOZ_4 };
+static const unsigned int pwm_f_z_pins[] = { GPIOZ_5 };
+static const unsigned int pwm_e_z_pins[] = { GPIOZ_6 };
+static const unsigned int tsin_b_clk_z_pins[] = { GPIOZ_7 };
+static const unsigned int tsin_b_sop_z_pins[] = { GPIOZ_10 };
+static const unsigned int tsin_b_valid_z_pins[] = { GPIOZ_11 };
+static const unsigned int tsin_b_d0_z_pins[] = { GPIOZ_12 };
+
+/* Bank Z func6 */
+static const unsigned int s2_demod_gpio7_pins[] = { GPIOZ_0 };
+static const unsigned int s2_demod_gpio6_pins[] = { GPIOZ_1 };
+static const unsigned int s2_demod_gpio5_pins[] = { GPIOZ_2 };
+static const unsigned int s2_demod_gpio4_pins[] = { GPIOZ_3 };
+static const unsigned int s2_demod_gpio3_pins[] = { GPIOZ_4 };
+static const unsigned int s2_demod_gpio2_pins[] = { GPIOZ_5 };
+static const unsigned int diseqc_out_pins[] = { GPIOZ_7 };
+static const unsigned int s2_demod_gpio1_pins[] = { GPIOZ_8 };
+static const unsigned int s2_demod_gpio0_pins[] = { GPIOZ_12 };
+
+/* Bank Z func7 */
+static const unsigned int gen_clk_z9_pins[] = { GPIOZ_9 };
+static const unsigned int gen_clk_z12_pins[] = { GPIOZ_12 };
+
+static struct meson_pmx_group meson_s4_periphs_groups[] = {
+ GPIO_GROUP(GPIOE_0),
+ GPIO_GROUP(GPIOE_1),
+
+ GPIO_GROUP(GPIOB_0),
+ GPIO_GROUP(GPIOB_1),
+ GPIO_GROUP(GPIOB_2),
+ GPIO_GROUP(GPIOB_3),
+ GPIO_GROUP(GPIOB_4),
+ GPIO_GROUP(GPIOB_5),
+ GPIO_GROUP(GPIOB_6),
+ GPIO_GROUP(GPIOB_7),
+ GPIO_GROUP(GPIOB_8),
+ GPIO_GROUP(GPIOB_9),
+ GPIO_GROUP(GPIOB_10),
+ GPIO_GROUP(GPIOB_11),
+ GPIO_GROUP(GPIOB_12),
+ GPIO_GROUP(GPIOB_13),
+
+ GPIO_GROUP(GPIOC_0),
+ GPIO_GROUP(GPIOC_1),
+ GPIO_GROUP(GPIOC_2),
+ GPIO_GROUP(GPIOC_3),
+ GPIO_GROUP(GPIOC_4),
+ GPIO_GROUP(GPIOC_5),
+ GPIO_GROUP(GPIOC_6),
+ GPIO_GROUP(GPIOC_7),
+
+ GPIO_GROUP(GPIOD_0),
+ GPIO_GROUP(GPIOD_1),
+ GPIO_GROUP(GPIOD_2),
+ GPIO_GROUP(GPIOD_3),
+ GPIO_GROUP(GPIOD_4),
+ GPIO_GROUP(GPIOD_5),
+ GPIO_GROUP(GPIOD_6),
+ GPIO_GROUP(GPIOD_7),
+ GPIO_GROUP(GPIOD_8),
+ GPIO_GROUP(GPIOD_9),
+ GPIO_GROUP(GPIOD_10),
+ GPIO_GROUP(GPIOD_11),
+
+ GPIO_GROUP(GPIOH_0),
+ GPIO_GROUP(GPIOH_1),
+ GPIO_GROUP(GPIOH_2),
+ GPIO_GROUP(GPIOH_3),
+ GPIO_GROUP(GPIOH_4),
+ GPIO_GROUP(GPIOH_5),
+ GPIO_GROUP(GPIOH_6),
+ GPIO_GROUP(GPIOH_7),
+ GPIO_GROUP(GPIOH_8),
+ GPIO_GROUP(GPIOH_9),
+ GPIO_GROUP(GPIOH_10),
+ GPIO_GROUP(GPIOH_11),
+
+ GPIO_GROUP(GPIOX_0),
+ GPIO_GROUP(GPIOX_1),
+ GPIO_GROUP(GPIOX_2),
+ GPIO_GROUP(GPIOX_3),
+ GPIO_GROUP(GPIOX_4),
+ GPIO_GROUP(GPIOX_5),
+ GPIO_GROUP(GPIOX_6),
+ GPIO_GROUP(GPIOX_7),
+ GPIO_GROUP(GPIOX_8),
+ GPIO_GROUP(GPIOX_9),
+ GPIO_GROUP(GPIOX_10),
+ GPIO_GROUP(GPIOX_11),
+ GPIO_GROUP(GPIOX_12),
+ GPIO_GROUP(GPIOX_13),
+ GPIO_GROUP(GPIOX_14),
+ GPIO_GROUP(GPIOX_15),
+ GPIO_GROUP(GPIOX_16),
+ GPIO_GROUP(GPIOX_17),
+ GPIO_GROUP(GPIOX_18),
+ GPIO_GROUP(GPIOX_19),
+
+ GPIO_GROUP(GPIOZ_0),
+ GPIO_GROUP(GPIOZ_1),
+ GPIO_GROUP(GPIOZ_2),
+ GPIO_GROUP(GPIOZ_3),
+ GPIO_GROUP(GPIOZ_4),
+ GPIO_GROUP(GPIOZ_5),
+ GPIO_GROUP(GPIOZ_6),
+ GPIO_GROUP(GPIOZ_7),
+ GPIO_GROUP(GPIOZ_8),
+ GPIO_GROUP(GPIOZ_9),
+ GPIO_GROUP(GPIOZ_10),
+ GPIO_GROUP(GPIOZ_11),
+ GPIO_GROUP(GPIOZ_12),
+
+ GPIO_GROUP(GPIO_TEST_N),
+
+ /* BANK E func1 */
+ GROUP(i2c0_sda, 1),
+ GROUP(i2c0_scl, 1),
+
+ /* BANK E func2 */
+ GROUP(uart_b_tx_e, 2),
+ GROUP(uart_b_rx_e, 2),
+
+ /* BANK E func3 */
+ GROUP(pwm_h, 3),
+ GROUP(pwm_j, 3),
+
+ /* BANK B func1 */
+ GROUP(emmc_nand_d0, 1),
+ GROUP(emmc_nand_d1, 1),
+ GROUP(emmc_nand_d2, 1),
+ GROUP(emmc_nand_d3, 1),
+ GROUP(emmc_nand_d4, 1),
+ GROUP(emmc_nand_d5, 1),
+ GROUP(emmc_nand_d6, 1),
+ GROUP(emmc_nand_d7, 1),
+ GROUP(emmc_clk, 1),
+ GROUP(emmc_rst, 1),
+ GROUP(emmc_cmd, 1),
+ GROUP(emmc_nand_ds, 1),
+
+ /* Bank B func2 */
+ GROUP(nand_wen_clk, 2),
+ GROUP(nand_ale, 2),
+ GROUP(nand_ren_wr, 2),
+ GROUP(nand_cle, 2),
+ GROUP(nand_ce0, 2),
+
+ /* Bank B func3 */
+ GROUP(spif_hold, 3),
+ GROUP(spif_mo, 3),
+ GROUP(spif_mi, 3),
+ GROUP(spif_clk, 3),
+ GROUP(spif_wp, 3),
+ GROUP(spif_cs, 3),
+
+ /* Bank C func1 */
+ GROUP(sdcard_d0_c, 1),
+ GROUP(sdcard_d1_c, 1),
+ GROUP(sdcard_d2_c, 1),
+ GROUP(sdcard_d3_c, 1),
+ GROUP(sdcard_clk_c, 1),
+ GROUP(sdcard_cmd_c, 1),
+ GROUP(sdcard_cd, 1),
+
+ /* Bank C func2 */
+ GROUP(jtag_2_tdo, 2),
+ GROUP(jtag_2_tdi, 2),
+ GROUP(uart_b_rx_c, 2),
+ GROUP(uart_b_tx_c, 2),
+ GROUP(jtag_2_clk, 2),
+ GROUP(jtag_2_tms, 2),
+ GROUP(i2c1_sda_c, 2),
+ GROUP(i2c1_scl_c, 2),
+
+ /* Bank C func3 */
+ GROUP(pdm_din1_c, 3),
+ GROUP(pdm_din0_c, 3),
+ GROUP(i2c4_sda_c, 3),
+ GROUP(i2c4_scl_c, 3),
+ GROUP(pdm_dclk_c, 3),
+ GROUP(iso7816_clk_c, 3),
+ GROUP(iso7816_data_c, 3),
+
+ /* Bank C func4 */
+ GROUP(tdm_d2_c, 4),
+ GROUP(tdm_d3_c, 4),
+ GROUP(tdm_fs1_c, 4),
+ GROUP(mclk_1_c, 4),
+ GROUP(tdm_d4_c, 4),
+ GROUP(tdm_d5_c, 4),
+
+ /* Bank D func1 */
+ GROUP(uart_b_tx_d, 1),
+ GROUP(uart_b_rx_d, 1),
+ GROUP(uart_b_cts_d, 1),
+ GROUP(uart_b_rts_d, 1),
+ GROUP(remote_out, 1),
+ GROUP(remote_in, 1),
+ GROUP(jtag_1_clk, 1),
+ GROUP(jtag_1_tms, 1),
+ GROUP(jtag_1_tdi, 1),
+ GROUP(jtag_1_tdo, 1),
+ GROUP(clk12_24, 1),
+ GROUP(pwm_g_hiz, 1),
+
+ /* Bank D func2 */
+ GROUP(i2c4_sda_d, 2),
+ GROUP(i2c4_scl_d, 2),
+ GROUP(mclk_1_d, 2),
+ GROUP(tdm_sclk1_d, 2),
+ GROUP(tdm_fs1_d, 2),
+ GROUP(tdm_d4_d, 2),
+ GROUP(tdm_d3_d, 2),
+ GROUP(tdm_d2_d, 2),
+ GROUP(pwm_g_d, 2),
+
+ /* Bank D func3 */
+ GROUP(uart_c_tx, 3),
+ GROUP(uart_c_rx, 3),
+ GROUP(pwm_b_d, 3),
+ GROUP(pwm_a_d, 3),
+ GROUP(pwm_c_d, 3),
+ GROUP(pwm_d_d, 3),
+ GROUP(pwm_i_d, 3),
+
+ /* Bank D func4 */
+ GROUP(clk_32k_in, 4),
+ GROUP(pwm_b_hiz, 4),
+ GROUP(pwm_a_hiz, 4),
+ GROUP(pwm_c_hiz, 4),
+ GROUP(pdm_dclk_d, 4),
+ GROUP(pdm_din0_d, 4),
+ GROUP(pdm_din1_d, 4),
+
+ /* Bank D func5 */
+ GROUP(mic_mute_en, 5),
+ GROUP(mic_mute_key, 5),
+ GROUP(i2c1_sda_d, 5),
+ GROUP(i2c1_scl_d, 5),
+ GROUP(i2c2_sda_d, 5),
+ GROUP(i2c2_scl_d, 5),
+
+ /* Bank D func6 */
+ GROUP(gen_clk_d, 6),
+ GROUP(tsin_b_clk_c, 6),
+ GROUP(tsin_b_sop_c, 6),
+ GROUP(tsin_b_valid_c, 6),
+ GROUP(tsin_b_d0_c, 6),
+
+ /* Bank H func1 */
+ GROUP(hdmitx_sda, 1),
+ GROUP(hdmitx_sck, 1),
+ GROUP(hdmitx_hpd_in, 1),
+ GROUP(ao_cec_a, 1),
+ GROUP(spdif_out_h, 1),
+ GROUP(spdif_in, 1),
+ GROUP(i2c1_sda_h, 1),
+ GROUP(i2c1_scl_h, 1),
+ GROUP(i2c2_sda_h8, 1),
+ GROUP(i2c2_scl_h9, 1),
+ GROUP(eth_link_led, 1),
+ GROUP(eth_act_led, 1),
+
+ /* Bank H func2 */
+ GROUP(i2c2_sda_h0, 2),
+ GROUP(i2c2_scl_h1, 2),
+ GROUP(ao_cec_b, 2),
+ GROUP(uart_d_tx_h, 2),
+ GROUP(uart_d_rx_h, 2),
+ GROUP(uart_d_cts_h, 2),
+ GROUP(uart_d_rts_h, 2),
+ GROUP(iso7816_clk_h, 2),
+ GROUP(iso7816_data_h, 2),
+ GROUP(uart_e_tx_h, 2),
+ GROUP(uart_e_rx_h, 2),
+
+ /* Bank H func3 */
+ GROUP(pwm_d_h, 3),
+ GROUP(pwm_i_h, 3),
+ GROUP(pdm_dclk_h, 3),
+ GROUP(pdm_din0_h, 3),
+ GROUP(pdm_din1_h, 3),
+
+ /* Bank H func4 */
+ GROUP(mclk_1_h, 4),
+ GROUP(tdm_sclk1_h, 4),
+ GROUP(tdm_fs1_h, 4),
+ GROUP(tdm_d2_h, 4),
+ GROUP(tdm_d3_h, 4),
+ GROUP(tdm_d4_h, 4),
+
+ /* Bank H func5 */
+ GROUP(spi_a_miso_h, 5),
+ GROUP(spi_a_mosi_h, 5),
+ GROUP(spi_a_clk_h, 5),
+ GROUP(spi_a_ss0_h, 5),
+
+ /* Bank H func6 */
+ GROUP(gen_clk_h, 6),
+ GROUP(tsin_b1_clk, 6),
+ GROUP(tsin_b1_sop, 6),
+ GROUP(tsin_b1_valid, 6),
+ GROUP(tsin_b1_d0, 6),
+
+ /* Bank X func1 */
+ GROUP(sdio_d0, 1),
+ GROUP(sdio_d1, 1),
+ GROUP(sdio_d2, 1),
+ GROUP(sdio_d3, 1),
+ GROUP(sdio_clk, 1),
+ GROUP(sdio_cmd, 1),
+ GROUP(pwm_a_x, 1),
+ GROUP(pwm_f_x, 1),
+ GROUP(tdm_d1, 1),
+ GROUP(tdm_d0, 1),
+ GROUP(tdm_fs0, 1),
+ GROUP(tdm_sclk0, 1),
+ GROUP(uart_a_tx, 1),
+ GROUP(uart_a_rx, 1),
+ GROUP(uart_a_cts, 1),
+ GROUP(uart_a_rts, 1),
+ GROUP(pwm_e_x, 1),
+ GROUP(i2c1_sda_x, 1),
+ GROUP(i2c1_scl_x, 1),
+ GROUP(pwm_b_x, 1),
+
+ /* Bank X func2 */
+ GROUP(pdm_din0_x, 2),
+ GROUP(pdm_din1_x, 2),
+ GROUP(pdm_dclk_x, 2),
+
+ /* Bank X func3 */
+ GROUP(spi_a_mosi_x, 3),
+ GROUP(spi_a_miso_x, 3),
+ GROUP(spi_a_ss0_x, 3),
+ GROUP(spi_a_clk_x, 3),
+
+ /* Bank X func4 */
+ GROUP(pwm_c_x, 4),
+ GROUP(i2c_slave_scl, 4),
+ GROUP(i2c_slave_sda, 4),
+
+ /* Bank X func5 */
+ GROUP(i2c3_sda_x, 5),
+ GROUP(i2c3_scl_x, 5),
+
+ /* Bank Z func1 */
+ GROUP(tdm_fs2, 1),
+ GROUP(tdm_sclk2, 1),
+ GROUP(tdm_d4_z, 1),
+ GROUP(tdm_d5_z, 1),
+ GROUP(tdm_d6, 1),
+ GROUP(tdm_d7, 1),
+ GROUP(mclk_2, 1),
+ GROUP(spdif_out_z, 1),
+ GROUP(dtv_a_if_agc_z10, 1),
+ GROUP(uart_e_tx_z11, 1),
+ GROUP(uart_e_rx_z12, 1),
+
+ /* Bank Z func2 */
+ GROUP(tsin_a_clk, 2),
+ GROUP(tsin_a_sop, 2),
+ GROUP(tsin_a_valid, 2),
+ GROUP(tsin_a_din0, 2),
+ GROUP(dtv_a_if_agc_z6, 2),
+ GROUP(dtv_b_if_agc, 2),
+ GROUP(i2c3_sda_z, 2),
+ GROUP(i2c3_scl_z, 2),
+ GROUP(dtv_a_rf_agc, 2),
+ GROUP(dtv_b_rf_agc, 2),
+
+ /* Bank Z func3 */
+ GROUP(sdcard_d0_z, 3),
+ GROUP(sdcard_d1_z, 3),
+ GROUP(sdcard_d2_z, 3),
+ GROUP(sdcard_d3_z, 3),
+ GROUP(sdcard_clk_z, 3),
+ GROUP(sdcard_cmd_z, 3),
+ GROUP(uart_e_tx_z8, 3),
+ GROUP(uart_e_rx_z9, 3),
+ GROUP(pdm_din1_z, 3),
+ GROUP(pdm_din0_z, 3),
+ GROUP(pdm_dclk_z, 3),
+
+ /* Bank Z func4 */
+ GROUP(spi_a_miso_z, 4),
+ GROUP(spi_a_mosi_z, 4),
+ GROUP(spi_a_clk_z, 4),
+ GROUP(spi_a_ss0_z, 4),
+ GROUP(spi_a_ss1_z, 4),
+ GROUP(spi_a_ss2_z, 4),
+ GROUP(i2c4_scl_z, 4),
+ GROUP(i2c4_sda_z, 4),
+
+ /* Bank Z func5 */
+ GROUP(uart_d_tx_z, 5),
+ GROUP(uart_d_rx_z, 5),
+ GROUP(uart_d_cts_z, 5),
+ GROUP(uart_d_rts_z, 5),
+ GROUP(pwm_g_z, 5),
+ GROUP(pwm_f_z, 5),
+ GROUP(pwm_e_z, 5),
+ GROUP(tsin_b_clk_z, 5),
+ GROUP(tsin_b_sop_z, 5),
+ GROUP(tsin_b_valid_z, 5),
+ GROUP(tsin_b_d0_z, 5),
+
+ /* Bank Z func6 */
+ GROUP(s2_demod_gpio7, 6),
+ GROUP(s2_demod_gpio6, 6),
+ GROUP(s2_demod_gpio5, 6),
+ GROUP(s2_demod_gpio4, 6),
+ GROUP(s2_demod_gpio3, 6),
+ GROUP(s2_demod_gpio2, 6),
+ GROUP(diseqc_out, 6),
+ GROUP(s2_demod_gpio1, 6),
+ GROUP(s2_demod_gpio0, 6),
+
+ /* Bank Z func7 */
+ GROUP(gen_clk_z9, 7),
+ GROUP(gen_clk_z12, 7)
+};
+
+static const char * const gpio_periphs_groups[] = {
+ "GPIOE_0", "GPIOE_1",
+
+ "GPIOB_0", "GPIOB_1", "GPIOB_2", "GPIOB_3", "GPIOB_4", "GPIOB_5",
+ "GPIOB_6", "GPIOB_7", "GPIOB_8", "GPIOB_9", "GPIOB_10", "GPIOB_11",
+ "GPIOB_12", "GPIOB_13",
+
+ "GPIOC_0", "GPIOC_1", "GPIOC_2", "GPIOC_3", "GPIOC_4", "GPIOC_5",
+ "GPIOC_6", "GPIOC_7",
+
+ "GPIOD_0", "GPIOD_1", "GPIOD_2", "GPIOD_3", "GPIOD_4", "GPIOD_5",
+ "GPIOD_6", "GPIOD_7", "GPIOD_8", "GPIOD_9", "GPIOD_10", "GPIOD_11",
+
+ "GPIOH_0", "GPIOH_1", "GPIOH_2", "GPIOH_3", "GPIOH_4", "GPIOH_5",
+ "GPIOH_6", "GPIOH_7", "GPIOH_8", "GPIOH_9", "GPIOH_10", "GPIOH_11",
+
+ "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4", "GPIOX_5",
+ "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+ "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15", "GPIOX_16", "GPIOX_17",
+ "GPIOX_18", "GPIOX_19",
+
+ "GPIOZ_0", "GPIOZ_1", "GPIOZ_2", "GPIOZ_3", "GPIOZ_4", "GPIOZ_5",
+ "GPIOZ_6", "GPIOZ_7", "GPIOZ_8", "GPIOZ_9", "GPIOZ_10",
+ "GPIOZ_11", "GPIOZ_12",
+
+ "GPIO_TEST_N"
+};
+
+static const char * const i2c0_groups[] = {
+ "i2c0_sda", "i2c0_scl"
+};
+
+static const char * const i2c1_groups[] = {
+ "i2c1_sda_c", "i2c1_scl_c",
+ "i2c1_sda_d", "i2c1_scl_d",
+ "i2c1_sda_h", "i2c1_scl_h",
+ "i2c1_sda_x", "i2c1_scl_x"
+};
+
+static const char * const i2c2_groups[] = {
+ "i2c2_sda_d", "i2c2_scl_d",
+ "i2c2_sda_h8", "i2c2_scl_h9",
+ "i2c2_sda_h0", "i2c2_scl_h1"
+};
+
+static const char * const i2c3_groups[] = {
+ "i2c3_sda_x", "i2c3_scl_x",
+ "i2c3_sda_z", "i2c3_scl_z"
+};
+
+static const char * const i2c4_groups[] = {
+ "i2c4_sda_c", "i2c4_scl_c",
+ "i2c4_sda_d", "i2c4_scl_d",
+ "i2c4_scl_z", "i2c4_sda_z"
+};
+
+static const char * const uart_a_groups[] = {
+ "uart_a_tx", "uart_a_rx", "uart_a_cts", "uart_a_rts"
+};
+
+static const char * const uart_b_groups[] = {
+ "uart_b_tx_e", "uart_b_rx_e", "uart_b_rx_c", "uart_b_tx_c",
+ "uart_b_tx_d", "uart_b_rx_d", "uart_b_cts_d", "uart_b_rts_d"
+};
+
+static const char * const uart_c_groups[] = {
+ "uart_c_tx", "uart_c_rx"
+};
+
+static const char * const uart_d_groups[] = {
+ "uart_d_tx_h", "uart_d_rx_h", "uart_d_cts_h", "uart_d_rts_h",
+ "uart_d_tx_z", "uart_d_rx_z", "uart_d_cts_z", "uart_d_rts_z"
+};
+
+static const char * const uart_e_groups[] = {
+ "uart_e_tx_h", "uart_e_rx_h", "uart_e_tx_z11", "uart_e_rx_z12",
+ "uart_e_tx_z8", "uart_e_rx_z9"
+};
+
+static const char * const emmc_groups[] = {
+ "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3",
+ "emmc_nand_d4", "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7",
+ "emmc_clk", "emmc_rst", "emmc_cmd", "emmc_nand_ds"
+};
+
+static const char * const nand_groups[] = {
+ "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", "emmc_nand_d3",
+ "emmc_nand_d4", "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7",
+ "nand_wen_clk", "nand_ale", "nand_ren_wr", "nand_cle", "nand_ce0"
+};
+
+static const char * const spif_groups[] = {
+ "spif_hold", "spif_mo", "spif_mi", "spif_clk", "spif_wp",
+ "spif_cs"
+};
+
+static const char * const sdcard_groups[] = {
+ "sdcard_d0_c", "sdcard_d1_c", "sdcard_d2_c", "sdcard_d3_c",
+ "sdcard_clk_c", "sdcard_cmd_c", "sdcard_cd",
+ "sdcard_d0_z", "sdcard_d1_z", "sdcard_d2_z", "sdcard_d3_z",
+ "sdcard_clk_z", "sdcard_cmd_z"
+};
+
+static const char * const jtag_1_groups[] = {
+ "jtag_1_clk", "jtag_1_tms", "jtag_1_tdi", "jtag_1_tdo"
+};
+
+static const char * const jtag_2_groups[] = {
+ "jtag_2_tdo", "jtag_2_tdi", "jtag_2_clk", "jtag_2_tms"
+};
+
+static const char * const pdm_groups[] = {
+ "pdm_din1_c", "pdm_din0_c", "pdm_dclk_c",
+ "pdm_dclk_d", "pdm_din0_d", "pdm_din1_d",
+ "pdm_dclk_h", "pdm_din0_h", "pdm_din1_h",
+ "pdm_din0_x", "pdm_din1_x", "pdm_dclk_x",
+ "pdm_din1_z", "pdm_din0_z", "pdm_dclk_z"
+};
+
+static const char * const iso7816_groups[] = {
+ "iso7816_clk_c", "iso7816_data_c",
+ "iso7816_clk_h", "iso7816_data_h"
+};
+
+static const char * const tdm_groups[] = {
+ "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
+ "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
+ "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
+ "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
+ "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
+};
+
+static const char * const mclk_groups[] = {
+ "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
+
+};
+
+static const char * const remote_out_groups[] = {
+ "remote_out"
+};
+
+static const char * const remote_in_groups[] = {
+ "remote_in"
+};
+
+static const char * const clk12_24_groups[] = {
+ "clk12_24"
+};
+
+static const char * const clk_32k_in_groups[] = {
+ "clk_32k_in"
+};
+
+static const char * const pwm_a_hiz_groups[] = {
+ "pwm_a_hiz"
+};
+
+static const char * const pwm_b_hiz_groups[] = {
+ "pwm_b_hiz"
+};
+
+static const char * const pwm_c_hiz_groups[] = {
+ "pwm_c_hiz"
+};
+
+static const char * const pwm_g_hiz_groups[] = {
+ "pwm_g_hiz"
+};
+
+static const char * const pwm_a_groups[] = {
+ "pwm_a_d"
+};
+
+static const char * const pwm_b_groups[] = {
+ "pwm_b_d", "pwm_b_x"
+
+};
+
+static const char * const pwm_c_groups[] = {
+ "pwm_c_d", "pwm_c_x"
+};
+
+static const char * const pwm_d_groups[] = {
+ "pwm_d_d", "pwm_d_h"
+};
+
+static const char * const pwm_e_groups[] = {
+ "pwm_e_x", "pwm_e_z"
+};
+
+static const char * const pwm_f_groups[] = {
+ "pwm_f_x", "pwm_f_z"
+};
+
+static const char * const pwm_g_groups[] = {
+ "pwm_g_d", "pwm_g_z"
+};
+
+static const char * const pwm_h_groups[] = {
+ "pwm_h",
+};
+
+static const char * const pwm_i_groups[] = {
+ "pwm_i_d", "pwm_i_h"
+};
+
+static const char * const pwm_j_groups[] = {
+ "pwm_j",
+};
+
+static const char * const mic_mute_groups[] = {
+ "mic_mute_en", "mic_mute_key"
+};
+
+static const char * const hdmitx_groups[] = {
+ "hdmitx_sda", "hdmitx_sck", "hdmitx_hpd_in"
+};
+
+static const char * const ao_cec_a_groups[] = {
+ "ao_cec_a"
+};
+
+static const char * const ao_cec_b_groups[] = {
+ "ao_cec_b"
+};
+
+static const char * const spdif_out_groups[] = {
+ "spdif_out_h", "spdif_out_z"
+};
+
+static const char * const spdif_in_groups[] = {
+ "spdif_in"
+};
+
+static const char * const eth_groups[] = {
+ "eth_link_led", "eth_act_led"
+};
+
+static const char * const spi_a_groups[] = {
+ "spi_a_miso_h", "spi_a_mosi_h", "spi_a_clk_h", "spi_a_ss0_h",
+
+ "spi_a_mosi_x", "spi_a_miso_x", "spi_a_ss0_x", "spi_a_clk_x",
+
+ "spi_a_miso_z", "spi_a_mosi_z", "spi_a_clk_z", "spi_a_ss0_z",
+ "spi_a_ss1_z", "spi_a_ss2_z"
+};
+
+static const char * const gen_clk_groups[] = {
+ "gen_clk_h", "gen_clk_z9", "gen_clk_z12"
+};
+
+static const char * const sdio_groups[] = {
+ "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", "sdio_clk", "sdio_cmd"
+};
+
+static const char * const i2c_slave_groups[] = {
+ "i2c_slave_scl", "i2c_slave_sda"
+};
+
+static const char * const dtv_groups[] = {
+ "dtv_a_if_agc_z10", "dtv_a_if_agc_z6", "dtv_b_if_agc",
+ "dtv_a_rf_agc", "dtv_b_rf_agc"
+};
+
+static const char * const tsin_a_groups[] = {
+ "tsin_a_clk", "tsin_a_sop", "tsin_a_valid", "tsin_a_din0"
+};
+
+static const char * const tsin_b_groups[] = {
+ "tsin_b_clk_c", "tsin_b_sop_c", "tsin_b_valid_c", "tsin_b_d0_c",
+ "tsin_b_clk_z", "tsin_b_sop_z", "tsin_b_valid_z", "tsin_b_d0_z"
+};
+
+static const char * const tsin_b1_groups[] = {
+ "tsin_b1_clk", "tsin_b1_sop", "tsin_b1_valid", "tsin_b1_d0"
+};
+
+static const char * const diseqc_out_groups[] = {
+ "diseqc_out"
+};
+
+static const char * const s2_demod_groups[] = {
+ "s2_demod_gpio7", "s2_demod_gpio6", "s2_demod_gpio5", "s2_demod_gpio4",
+ "s2_demod_gpio3", "s2_demod_gpio2", "s2_demod_gpio1", "s2_demod_gpio0"
+};
+
+static struct meson_pmx_func meson_s4_periphs_functions[] = {
+ FUNCTION(gpio_periphs),
+ FUNCTION(i2c0),
+ FUNCTION(i2c1),
+ FUNCTION(i2c2),
+ FUNCTION(i2c3),
+ FUNCTION(i2c4),
+ FUNCTION(uart_a),
+ FUNCTION(uart_b),
+ FUNCTION(uart_c),
+ FUNCTION(uart_d),
+ FUNCTION(uart_e),
+ FUNCTION(emmc),
+ FUNCTION(nand),
+ FUNCTION(spif),
+ FUNCTION(sdcard),
+ FUNCTION(jtag_1),
+ FUNCTION(jtag_2),
+ FUNCTION(pdm),
+ FUNCTION(iso7816),
+ FUNCTION(tdm),
+ FUNCTION(mclk),
+ FUNCTION(remote_out),
+ FUNCTION(remote_in),
+ FUNCTION(clk12_24),
+ FUNCTION(clk_32k_in),
+ FUNCTION(pwm_a_hiz),
+ FUNCTION(pwm_b_hiz),
+ FUNCTION(pwm_c_hiz),
+ FUNCTION(pwm_g_hiz),
+ FUNCTION(pwm_a),
+ FUNCTION(pwm_b),
+ FUNCTION(pwm_c),
+ FUNCTION(pwm_d),
+ FUNCTION(pwm_e),
+ FUNCTION(pwm_f),
+ FUNCTION(pwm_g),
+ FUNCTION(pwm_h),
+ FUNCTION(pwm_i),
+ FUNCTION(pwm_j),
+ FUNCTION(mic_mute),
+ FUNCTION(hdmitx),
+ FUNCTION(ao_cec_a),
+ FUNCTION(ao_cec_b),
+ FUNCTION(spdif_out),
+ FUNCTION(spdif_in),
+ FUNCTION(eth),
+ FUNCTION(spi_a),
+ FUNCTION(gen_clk),
+ FUNCTION(sdio),
+ FUNCTION(i2c_slave),
+ FUNCTION(dtv),
+ FUNCTION(tsin_a),
+ FUNCTION(tsin_b),
+ FUNCTION(tsin_b1),
+ FUNCTION(diseqc_out),
+ FUNCTION(s2_demod)
+};
+
+static struct meson_bank meson_s4_periphs_banks[] = {
+ /* name first last irq pullen pull dir out in */
+ BANK_DS("B", GPIOB_0, GPIOB_13, 0, 13,
+ 0x63, 0, 0x64, 0, 0x62, 0, 0x61, 0, 0x60, 0, 0x67, 0),
+ BANK_DS("C", GPIOC_0, GPIOC_7, 14, 21,
+ 0x53, 0, 0x54, 0, 0x52, 0, 0x51, 0, 0x50, 0, 0x57, 0),
+ BANK_DS("E", GPIOE_0, GPIOE_1, 22, 23,
+ 0x43, 0, 0x44, 0, 0x42, 0, 0x41, 0, 0x40, 0, 0x47, 0),
+ BANK_DS("D", GPIOD_0, GPIOD_11, 24, 35,
+ 0x33, 0, 0x34, 0, 0x32, 0, 0x31, 0, 0x30, 0, 0x37, 0),
+ BANK_DS("H", GPIOH_0, GPIOH_11, 36, 47,
+ 0x23, 0, 0x24, 0, 0x22, 0, 0x21, 0, 0x20, 0, 0x27, 0),
+ BANK_DS("X", GPIOX_0, GPIOX_19, 48, 67,
+ 0x13, 0, 0x14, 0, 0x12, 0, 0x11, 0, 0x10, 0, 0x17, 0),
+ BANK_DS("Z", GPIOZ_0, GPIOZ_12, 68, 80,
+ 0x03, 0, 0x04, 0, 0x02, 0, 0x01, 0, 0x00, 0, 0x07, 0),
+ BANK_DS("TEST_N", GPIO_TEST_N, GPIO_TEST_N, -1, -1,
+ 0x83, 0, 0x84, 0, 0x82, 0, 0x81, 0, 0x80, 0, 0x87, 0),
+};
+
+static struct meson_pmx_bank meson_s4_periphs_pmx_banks[] = {
+ /*name first lask reg offset*/
+ BANK_PMX("B", GPIOB_0, GPIOB_13, 0x00, 0),
+ BANK_PMX("C", GPIOC_0, GPIOC_7, 0x9, 0),
+ BANK_PMX("E", GPIOE_0, GPIOE_1, 0x12, 0),
+ BANK_PMX("D", GPIOD_0, GPIOD_11, 0x10, 0),
+ BANK_PMX("H", GPIOH_0, GPIOH_11, 0xb, 0),
+ BANK_PMX("X", GPIOX_0, GPIOX_19, 0x3, 0),
+ BANK_PMX("Z", GPIOZ_0, GPIOZ_12, 0x6, 0),
+ BANK_PMX("TEST_N", GPIO_TEST_N, GPIO_TEST_N, 0xf, 0),
+};
+
+static struct meson_axg_pmx_data meson_s4_periphs_pmx_banks_data = {
+ .pmx_banks = meson_s4_periphs_pmx_banks,
+ .num_pmx_banks = ARRAY_SIZE(meson_s4_periphs_pmx_banks),
+};
+
+static struct meson_pinctrl_data meson_s4_periphs_pinctrl_data = {
+ .name = "periphs-banks",
+ .pins = meson_s4_periphs_pins,
+ .groups = meson_s4_periphs_groups,
+ .funcs = meson_s4_periphs_functions,
+ .banks = meson_s4_periphs_banks,
+ .num_pins = ARRAY_SIZE(meson_s4_periphs_pins),
+ .num_groups = ARRAY_SIZE(meson_s4_periphs_groups),
+ .num_funcs = ARRAY_SIZE(meson_s4_periphs_functions),
+ .num_banks = ARRAY_SIZE(meson_s4_periphs_banks),
+ .pmx_ops = &meson_axg_pmx_ops,
+ .pmx_data = &meson_s4_periphs_pmx_banks_data,
+ .parse_dt = &meson_a1_parse_dt_extra,
+};
+
+static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
+ {
+ .compatible = "amlogic,meson-s4-periphs-pinctrl",
+ .data = &meson_s4_periphs_pinctrl_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, meson_s4_pinctrl_dt_match);
+
+static struct platform_driver meson_s4_pinctrl_driver = {
+ .probe = meson_pinctrl_probe,
+ .driver = {
+ .name = "meson-s4-pinctrl",
+ .of_match_table = meson_s4_pinctrl_dt_match,
+ },
+};
+
+module_platform_driver(meson_s4_pinctrl_driver);
+MODULE_LICENSE("Dual BSD/GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
2021-12-14 2:21 ` Qianggui Song
(?)
@ 2021-12-14 10:00 ` Jerome Brunet
-1 siblings, 0 replies; 30+ messages in thread
From: Jerome Brunet @ 2021-12-14 10:00 UTC (permalink / raw)
To: Qianggui Song, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
On Tue 14 Dec 2021 at 10:21, Qianggui Song <qianggui.song@amlogic.com> wrote:
> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
> same register laytout as the previous Meson-A1.
>
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
[...]
> +
> +/* Bank D func1 */
> +static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
> +static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
> +static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
> +static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
Your S805x2 documenation says the 4 pins above are HDMI related for func 1
> +static const unsigned int remote_out_pins[] = { GPIOD_4 };
> +static const unsigned int remote_in_pins[] = { GPIOD_5 };
SPDIF for those 2
> +static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
> +static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
> +static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
> +static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
I2C for those 4
It goes on like this for the rest of GPIO Bank D and I did not check the
other banks
Could you please clarify
* Does the S4 applies to S805X2, S905Y4, Both ?
* Is the S805X2 Datasheet Revision 0.4 accurate ?
> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
> +
[...]
> +
> +static const char * const tdm_groups[] = {
> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
> +};
On previous chip, there were pin assigned to tdm A, B or C.
On this generation, it seems you have added a second level on pinmuxing
to re-route the audio pins to different controllers
In such case, I don't think they belong in the same group.
Depending on settins, D2 and D3 could be unrelated
I think each audio pin should have its own group (one group for D3, one
D4, etc ...)
> +
> +static const char * const mclk_groups[] = {
> + "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
> +
> +};
mclk_1 and mclk_2 should be in separate groups
> +
> +static const char * const remote_out_groups[] = {
> + "remote_out"
> +};
> +
> +static const char * const remote_in_groups[] = {
> + "remote_in"
> +};
> +
> +static const char * const clk12_24_groups[] = {
> + "clk12_24"
> +};
> +
> +static const char * const clk_32k_in_groups[] = {
> + "clk_32k_in"
> +};
> +
> +static const char * const pwm_a_hiz_groups[] = {
> + "pwm_a_hiz"
> +};
> +
I'm curious to know what the pwm hiz function is ?
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-14 10:00 ` Jerome Brunet
0 siblings, 0 replies; 30+ messages in thread
From: Jerome Brunet @ 2021-12-14 10:00 UTC (permalink / raw)
To: Qianggui Song, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
On Tue 14 Dec 2021 at 10:21, Qianggui Song <qianggui.song@amlogic.com> wrote:
> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
> same register laytout as the previous Meson-A1.
>
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
[...]
> +
> +/* Bank D func1 */
> +static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
> +static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
> +static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
> +static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
Your S805x2 documenation says the 4 pins above are HDMI related for func 1
> +static const unsigned int remote_out_pins[] = { GPIOD_4 };
> +static const unsigned int remote_in_pins[] = { GPIOD_5 };
SPDIF for those 2
> +static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
> +static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
> +static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
> +static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
I2C for those 4
It goes on like this for the rest of GPIO Bank D and I did not check the
other banks
Could you please clarify
* Does the S4 applies to S805X2, S905Y4, Both ?
* Is the S805X2 Datasheet Revision 0.4 accurate ?
> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
> +
[...]
> +
> +static const char * const tdm_groups[] = {
> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
> +};
On previous chip, there were pin assigned to tdm A, B or C.
On this generation, it seems you have added a second level on pinmuxing
to re-route the audio pins to different controllers
In such case, I don't think they belong in the same group.
Depending on settins, D2 and D3 could be unrelated
I think each audio pin should have its own group (one group for D3, one
D4, etc ...)
> +
> +static const char * const mclk_groups[] = {
> + "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
> +
> +};
mclk_1 and mclk_2 should be in separate groups
> +
> +static const char * const remote_out_groups[] = {
> + "remote_out"
> +};
> +
> +static const char * const remote_in_groups[] = {
> + "remote_in"
> +};
> +
> +static const char * const clk12_24_groups[] = {
> + "clk12_24"
> +};
> +
> +static const char * const clk_32k_in_groups[] = {
> + "clk_32k_in"
> +};
> +
> +static const char * const pwm_a_hiz_groups[] = {
> + "pwm_a_hiz"
> +};
> +
I'm curious to know what the pwm hiz function is ?
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-14 10:00 ` Jerome Brunet
0 siblings, 0 replies; 30+ messages in thread
From: Jerome Brunet @ 2021-12-14 10:00 UTC (permalink / raw)
To: Qianggui Song, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
On Tue 14 Dec 2021 at 10:21, Qianggui Song <qianggui.song@amlogic.com> wrote:
> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
> same register laytout as the previous Meson-A1.
>
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
[...]
> +
> +/* Bank D func1 */
> +static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
> +static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
> +static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
> +static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
Your S805x2 documenation says the 4 pins above are HDMI related for func 1
> +static const unsigned int remote_out_pins[] = { GPIOD_4 };
> +static const unsigned int remote_in_pins[] = { GPIOD_5 };
SPDIF for those 2
> +static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
> +static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
> +static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
> +static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
I2C for those 4
It goes on like this for the rest of GPIO Bank D and I did not check the
other banks
Could you please clarify
* Does the S4 applies to S805X2, S905Y4, Both ?
* Is the S805X2 Datasheet Revision 0.4 accurate ?
> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
> +
[...]
> +
> +static const char * const tdm_groups[] = {
> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
> +};
On previous chip, there were pin assigned to tdm A, B or C.
On this generation, it seems you have added a second level on pinmuxing
to re-route the audio pins to different controllers
In such case, I don't think they belong in the same group.
Depending on settins, D2 and D3 could be unrelated
I think each audio pin should have its own group (one group for D3, one
D4, etc ...)
> +
> +static const char * const mclk_groups[] = {
> + "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
> +
> +};
mclk_1 and mclk_2 should be in separate groups
> +
> +static const char * const remote_out_groups[] = {
> + "remote_out"
> +};
> +
> +static const char * const remote_in_groups[] = {
> + "remote_in"
> +};
> +
> +static const char * const clk12_24_groups[] = {
> + "clk12_24"
> +};
> +
> +static const char * const clk_32k_in_groups[] = {
> + "clk_32k_in"
> +};
> +
> +static const char * const pwm_a_hiz_groups[] = {
> + "pwm_a_hiz"
> +};
> +
I'm curious to know what the pwm hiz function is ?
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
2021-12-14 2:21 ` Qianggui Song
(?)
@ 2021-12-14 11:57 ` Andy Shevchenko
-1 siblings, 0 replies; 30+ messages in thread
From: Andy Shevchenko @ 2021-12-14 11:57 UTC (permalink / raw)
To: Qianggui Song
Cc: Linus Walleij, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland,
linux-arm Mailing List, linux-amlogic, Linux Kernel Mailing List,
open list:GPIO SUBSYSTEM
On Tue, Dec 14, 2021 at 6:27 AM Qianggui Song <qianggui.song@amlogic.com> wrote:
>
> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
> same register laytout as the previous Meson-A1.
layout
...
> +config PINCTRL_MESON_S4
> + tristate "Meson s4 Soc pinctrl driver"
> + depends on ARM64
> + select PINCTRL_MESON_AXG_PMX
> + default y
Why is it needed on other (non-MESON_S4) SoCs?
...
> +static const char * const i2c1_groups[] = {
> + "i2c1_sda_c", "i2c1_scl_c",
> + "i2c1_sda_d", "i2c1_scl_d",
> + "i2c1_sda_h", "i2c1_scl_h",
> + "i2c1_sda_x", "i2c1_scl_x"
In this and all the rest similar cases leave a comma.
> +};
...
> +static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
> + {
> + .compatible = "amlogic,meson-s4-periphs-pinctrl",
> + .data = &meson_s4_periphs_pinctrl_data,
> + },
> + { },
When it's a terminator entry, no comma is needed.
> +};
...
> +static struct platform_driver meson_s4_pinctrl_driver = {
> + .probe = meson_pinctrl_probe,
> + .driver = {
> + .name = "meson-s4-pinctrl",
> + .of_match_table = meson_s4_pinctrl_dt_match,
> + },
> +};
> +
> +module_platform_driver(meson_s4_pinctrl_driver);
Swap above two lines, first module_...() followed by a blank line.
> +MODULE_LICENSE("Dual BSD/GPL");
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-14 11:57 ` Andy Shevchenko
0 siblings, 0 replies; 30+ messages in thread
From: Andy Shevchenko @ 2021-12-14 11:57 UTC (permalink / raw)
To: Qianggui Song
Cc: Linus Walleij, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland,
linux-arm Mailing List, linux-amlogic, Linux Kernel Mailing List,
open list:GPIO SUBSYSTEM
On Tue, Dec 14, 2021 at 6:27 AM Qianggui Song <qianggui.song@amlogic.com> wrote:
>
> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
> same register laytout as the previous Meson-A1.
layout
...
> +config PINCTRL_MESON_S4
> + tristate "Meson s4 Soc pinctrl driver"
> + depends on ARM64
> + select PINCTRL_MESON_AXG_PMX
> + default y
Why is it needed on other (non-MESON_S4) SoCs?
...
> +static const char * const i2c1_groups[] = {
> + "i2c1_sda_c", "i2c1_scl_c",
> + "i2c1_sda_d", "i2c1_scl_d",
> + "i2c1_sda_h", "i2c1_scl_h",
> + "i2c1_sda_x", "i2c1_scl_x"
In this and all the rest similar cases leave a comma.
> +};
...
> +static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
> + {
> + .compatible = "amlogic,meson-s4-periphs-pinctrl",
> + .data = &meson_s4_periphs_pinctrl_data,
> + },
> + { },
When it's a terminator entry, no comma is needed.
> +};
...
> +static struct platform_driver meson_s4_pinctrl_driver = {
> + .probe = meson_pinctrl_probe,
> + .driver = {
> + .name = "meson-s4-pinctrl",
> + .of_match_table = meson_s4_pinctrl_dt_match,
> + },
> +};
> +
> +module_platform_driver(meson_s4_pinctrl_driver);
Swap above two lines, first module_...() followed by a blank line.
> +MODULE_LICENSE("Dual BSD/GPL");
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-14 11:57 ` Andy Shevchenko
0 siblings, 0 replies; 30+ messages in thread
From: Andy Shevchenko @ 2021-12-14 11:57 UTC (permalink / raw)
To: Qianggui Song
Cc: Linus Walleij, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland,
linux-arm Mailing List, linux-amlogic, Linux Kernel Mailing List,
open list:GPIO SUBSYSTEM
On Tue, Dec 14, 2021 at 6:27 AM Qianggui Song <qianggui.song@amlogic.com> wrote:
>
> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
> same register laytout as the previous Meson-A1.
layout
...
> +config PINCTRL_MESON_S4
> + tristate "Meson s4 Soc pinctrl driver"
> + depends on ARM64
> + select PINCTRL_MESON_AXG_PMX
> + default y
Why is it needed on other (non-MESON_S4) SoCs?
...
> +static const char * const i2c1_groups[] = {
> + "i2c1_sda_c", "i2c1_scl_c",
> + "i2c1_sda_d", "i2c1_scl_d",
> + "i2c1_sda_h", "i2c1_scl_h",
> + "i2c1_sda_x", "i2c1_scl_x"
In this and all the rest similar cases leave a comma.
> +};
...
> +static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
> + {
> + .compatible = "amlogic,meson-s4-periphs-pinctrl",
> + .data = &meson_s4_periphs_pinctrl_data,
> + },
> + { },
When it's a terminator entry, no comma is needed.
> +};
...
> +static struct platform_driver meson_s4_pinctrl_driver = {
> + .probe = meson_pinctrl_probe,
> + .driver = {
> + .name = "meson-s4-pinctrl",
> + .of_match_table = meson_s4_pinctrl_dt_match,
> + },
> +};
> +
> +module_platform_driver(meson_s4_pinctrl_driver);
Swap above two lines, first module_...() followed by a blank line.
> +MODULE_LICENSE("Dual BSD/GPL");
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4
2021-12-14 2:20 ` Qianggui Song
(?)
@ 2021-12-15 20:29 ` Rob Herring
-1 siblings, 0 replies; 30+ messages in thread
From: Rob Herring @ 2021-12-15 20:29 UTC (permalink / raw)
To: Qianggui Song
Cc: Martin Blumenstingl, Rob Herring, Mark Rutland, linux-gpio,
Linus Walleij, devicetree, linux-arm-kernel, linux-kernel,
Neil Armstrong, linux-amlogic, Kevin Hilman, Jerome Brunet
On Tue, 14 Dec 2021 10:20:59 +0800, Qianggui Song wrote:
> Add a new dt-binding header file which documents the detail pin names.
>
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
> include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++++++++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4
@ 2021-12-15 20:29 ` Rob Herring
0 siblings, 0 replies; 30+ messages in thread
From: Rob Herring @ 2021-12-15 20:29 UTC (permalink / raw)
To: Qianggui Song
Cc: Martin Blumenstingl, Rob Herring, Mark Rutland, linux-gpio,
Linus Walleij, devicetree, linux-arm-kernel, linux-kernel,
Neil Armstrong, linux-amlogic, Kevin Hilman, Jerome Brunet
On Tue, 14 Dec 2021 10:20:59 +0800, Qianggui Song wrote:
> Add a new dt-binding header file which documents the detail pin names.
>
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
> include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++++++++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
>
Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4
@ 2021-12-15 20:29 ` Rob Herring
0 siblings, 0 replies; 30+ messages in thread
From: Rob Herring @ 2021-12-15 20:29 UTC (permalink / raw)
To: Qianggui Song
Cc: Martin Blumenstingl, Rob Herring, Mark Rutland, linux-gpio,
Linus Walleij, devicetree, linux-arm-kernel, linux-kernel,
Neil Armstrong, linux-amlogic, Kevin Hilman, Jerome Brunet
On Tue, 14 Dec 2021 10:20:59 +0800, Qianggui Song wrote:
> Add a new dt-binding header file which documents the detail pin names.
>
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
> include/dt-bindings/gpio/meson-s4-gpio.h | 99 ++++++++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 include/dt-bindings/gpio/meson-s4-gpio.h
>
Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
2021-12-14 11:57 ` Andy Shevchenko
@ 2021-12-16 3:24 ` qianggui.song
-1 siblings, 0 replies; 30+ messages in thread
From: qianggui.song @ 2021-12-16 3:24 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Linus Walleij, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland,
linux-arm Mailing List, linux-amlogic, Linux Kernel Mailing List,
open list:GPIO SUBSYSTEM
Hi,Andy
On 2021/12/14 下午7:57, Andy Shevchenko wrote:
> On Tue, Dec 14, 2021 at 6:27 AM Qianggui Song <qianggui.song@amlogic.com> wrote:
>> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
>> same register laytout as the previous Meson-A1.
> layout
>
> ...
awkward
>
>> +config PINCTRL_MESON_S4
>> + tristate "Meson s4 Soc pinctrl driver"
>> + depends on ARM64
>> + select PINCTRL_MESON_AXG_PMX
>> + default y
> Why is it needed on other (non-MESON_S4) SoCs?
>
> ...
to keep consistent with previous chips configuration, maybe another
patch set to remove all default y
for all previous SoCs.
>
>> +static const char * const i2c1_groups[] = {
>> + "i2c1_sda_c", "i2c1_scl_c",
>> + "i2c1_sda_d", "i2c1_scl_d",
>> + "i2c1_sda_h", "i2c1_scl_h",
>> + "i2c1_sda_x", "i2c1_scl_x"
> In this and all the rest similar cases leave a comma.
Okay.
>
>> +};
> ...
>
>> +static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
>> + {
>> + .compatible = "amlogic,meson-s4-periphs-pinctrl",
>> + .data = &meson_s4_periphs_pinctrl_data,
>> + },
>> + { },
> When it's a terminator entry, no comma is needed.
will fix it in next patch
>
>> +};
> ...
>
>> +static struct platform_driver meson_s4_pinctrl_driver = {
>> + .probe = meson_pinctrl_probe,
>> + .driver = {
>> + .name = "meson-s4-pinctrl",
>> + .of_match_table = meson_s4_pinctrl_dt_match,
>> + },
>> +};
>> +
>> +module_platform_driver(meson_s4_pinctrl_driver);
> Swap above two lines, first module_...() followed by a blank line.
Okay.
>
>> +MODULE_LICENSE("Dual BSD/GPL");
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-16 3:24 ` qianggui.song
0 siblings, 0 replies; 30+ messages in thread
From: qianggui.song @ 2021-12-16 3:24 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Linus Walleij, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Martin Blumenstingl, Rob Herring, Mark Rutland,
linux-arm Mailing List, linux-amlogic, Linux Kernel Mailing List,
open list:GPIO SUBSYSTEM
Hi,Andy
On 2021/12/14 下午7:57, Andy Shevchenko wrote:
> On Tue, Dec 14, 2021 at 6:27 AM Qianggui Song <qianggui.song@amlogic.com> wrote:
>> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
>> same register laytout as the previous Meson-A1.
> layout
>
> ...
awkward
>
>> +config PINCTRL_MESON_S4
>> + tristate "Meson s4 Soc pinctrl driver"
>> + depends on ARM64
>> + select PINCTRL_MESON_AXG_PMX
>> + default y
> Why is it needed on other (non-MESON_S4) SoCs?
>
> ...
to keep consistent with previous chips configuration, maybe another
patch set to remove all default y
for all previous SoCs.
>
>> +static const char * const i2c1_groups[] = {
>> + "i2c1_sda_c", "i2c1_scl_c",
>> + "i2c1_sda_d", "i2c1_scl_d",
>> + "i2c1_sda_h", "i2c1_scl_h",
>> + "i2c1_sda_x", "i2c1_scl_x"
> In this and all the rest similar cases leave a comma.
Okay.
>
>> +};
> ...
>
>> +static const struct of_device_id meson_s4_pinctrl_dt_match[] = {
>> + {
>> + .compatible = "amlogic,meson-s4-periphs-pinctrl",
>> + .data = &meson_s4_periphs_pinctrl_data,
>> + },
>> + { },
> When it's a terminator entry, no comma is needed.
will fix it in next patch
>
>> +};
> ...
>
>> +static struct platform_driver meson_s4_pinctrl_driver = {
>> + .probe = meson_pinctrl_probe,
>> + .driver = {
>> + .name = "meson-s4-pinctrl",
>> + .of_match_table = meson_s4_pinctrl_dt_match,
>> + },
>> +};
>> +
>> +module_platform_driver(meson_s4_pinctrl_driver);
> Swap above two lines, first module_...() followed by a blank line.
Okay.
>
>> +MODULE_LICENSE("Dual BSD/GPL");
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
2021-12-14 10:00 ` Jerome Brunet
@ 2021-12-16 6:07 ` qianggui.song
-1 siblings, 0 replies; 30+ messages in thread
From: qianggui.song @ 2021-12-16 6:07 UTC (permalink / raw)
To: Jerome Brunet, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
Hi, Jerome
On 2021/12/14 下午6:00, Jerome Brunet wrote:
>
>
> On Tue 14 Dec 2021 at 10:21, Qianggui Song <qianggui.song@amlogic.com> wrote:
>
>> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
>> same register laytout as the previous Meson-A1.
>>
>> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
>> ---
>
> [...]
>
>> +
>> +/* Bank D func1 */
>> +static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
>> +static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
>> +static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
>> +static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
>
> Your S805x2 documenation says the 4 pins above are HDMI related for func 1
>
>> +static const unsigned int remote_out_pins[] = { GPIOD_4 };
>> +static const unsigned int remote_in_pins[] = { GPIOD_5 };
>
> SPDIF for those 2
>
>> +static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
>> +static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
>> +static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
>> +static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
>
> I2C for those 4
>
> It goes on like this for the rest of GPIO Bank D and I did not check the
> other banks
>
> Could you please clarify
> * Does the S4 applies to S805X2, S905Y4, Both ?
> * Is the S805X2 Datasheet Revision 0.4 accurate ?
Explain the above confuse here, yes, the S4 does apply to both S805X2
and S905Y4, and I create this .c driver based on S805X2 Datasheet
Revision 0.5. I have no S805X2 Datasheet 0.4 on hand however our
reference board works well based on Revision 0.5 configuration.
>
>> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
>> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
>> +
>
> [...]
>
>> +
>> +static const char * const tdm_groups[] = {
>> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
>> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
>> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
>> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
>> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
>> +};
>
> On previous chip, there were pin assigned to tdm A, B or C.
> On this generation, it seems you have added a second level on pinmuxing
> to re-route the audio pins to different controllers
>
> In such case, I don't think they belong in the same group.
> Depending on settins, D2 and D3 could be unrelated
>
> I think each audio pin should have its own group (one group for D3, one
> D4, etc ...)
>
According to our audio colleague, on this chip, tdm A/B/C can choose
which pins are routed to their controllers freely by writing special
registers, say, tdm_d2_c can be assigned to any of tdm a, b and c by
demand, so no need to specify a/b/c words any more.
>> +
>> +static const char * const mclk_groups[] = {
>> + "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
>> +
>> +};
>
> mclk_1 and mclk_2 should be in separate groups
>
Okay,will fix it in next patch.
>> +
>> +static const char * const remote_out_groups[] = {
>> + "remote_out"
>> +};
>> +
>> +static const char * const remote_in_groups[] = {
>> + "remote_in"
>> +};
>> +
>> +static const char * const clk12_24_groups[] = {
>> + "clk12_24"
>> +};
>> +
>> +static const char * const clk_32k_in_groups[] = {
>> + "clk_32k_in"
>> +};
>> +
>> +static const char * const pwm_a_hiz_groups[] = {
>> + "pwm_a_hiz"
>> +};
>> +
>
> I'm curious to know what the pwm hiz function is ?
>
This is a special mode of pwm and short for high-intensity zone. If this
mode is enable, when pwm is in "on" time, pin of pwm become hiz state,
the high level is not driven by chips but a pull-up resistor.
> .
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-16 6:07 ` qianggui.song
0 siblings, 0 replies; 30+ messages in thread
From: qianggui.song @ 2021-12-16 6:07 UTC (permalink / raw)
To: Jerome Brunet, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
Hi, Jerome
On 2021/12/14 下午6:00, Jerome Brunet wrote:
>
>
> On Tue 14 Dec 2021 at 10:21, Qianggui Song <qianggui.song@amlogic.com> wrote:
>
>> Add new pinctrl driver for Amlogic's Meson-S4 SoC which share the
>> same register laytout as the previous Meson-A1.
>>
>> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
>> ---
>
> [...]
>
>> +
>> +/* Bank D func1 */
>> +static const unsigned int uart_b_tx_d_pins[] = { GPIOD_0 };
>> +static const unsigned int uart_b_rx_d_pins[] = { GPIOD_1 };
>> +static const unsigned int uart_b_cts_d_pins[] = { GPIOD_2 };
>> +static const unsigned int uart_b_rts_d_pins[] = { GPIOD_3 };
>
> Your S805x2 documenation says the 4 pins above are HDMI related for func 1
>
>> +static const unsigned int remote_out_pins[] = { GPIOD_4 };
>> +static const unsigned int remote_in_pins[] = { GPIOD_5 };
>
> SPDIF for those 2
>
>> +static const unsigned int jtag_1_clk_pins[] = { GPIOD_6 };
>> +static const unsigned int jtag_1_tms_pins[] = { GPIOD_7 };
>> +static const unsigned int jtag_1_tdi_pins[] = { GPIOD_8 };
>> +static const unsigned int jtag_1_tdo_pins[] = { GPIOD_9 };
>
> I2C for those 4
>
> It goes on like this for the rest of GPIO Bank D and I did not check the
> other banks
>
> Could you please clarify
> * Does the S4 applies to S805X2, S905Y4, Both ?
> * Is the S805X2 Datasheet Revision 0.4 accurate ?
Explain the above confuse here, yes, the S4 does apply to both S805X2
and S905Y4, and I create this .c driver based on S805X2 Datasheet
Revision 0.5. I have no S805X2 Datasheet 0.4 on hand however our
reference board works well based on Revision 0.5 configuration.
>
>> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
>> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
>> +
>
> [...]
>
>> +
>> +static const char * const tdm_groups[] = {
>> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
>> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
>> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
>> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
>> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
>> +};
>
> On previous chip, there were pin assigned to tdm A, B or C.
> On this generation, it seems you have added a second level on pinmuxing
> to re-route the audio pins to different controllers
>
> In such case, I don't think they belong in the same group.
> Depending on settins, D2 and D3 could be unrelated
>
> I think each audio pin should have its own group (one group for D3, one
> D4, etc ...)
>
According to our audio colleague, on this chip, tdm A/B/C can choose
which pins are routed to their controllers freely by writing special
registers, say, tdm_d2_c can be assigned to any of tdm a, b and c by
demand, so no need to specify a/b/c words any more.
>> +
>> +static const char * const mclk_groups[] = {
>> + "mclk_1_c", "mclk_1_d", "mclk_1_h", "mclk_2"
>> +
>> +};
>
> mclk_1 and mclk_2 should be in separate groups
>
Okay,will fix it in next patch.
>> +
>> +static const char * const remote_out_groups[] = {
>> + "remote_out"
>> +};
>> +
>> +static const char * const remote_in_groups[] = {
>> + "remote_in"
>> +};
>> +
>> +static const char * const clk12_24_groups[] = {
>> + "clk12_24"
>> +};
>> +
>> +static const char * const clk_32k_in_groups[] = {
>> + "clk_32k_in"
>> +};
>> +
>> +static const char * const pwm_a_hiz_groups[] = {
>> + "pwm_a_hiz"
>> +};
>> +
>
> I'm curious to know what the pwm hiz function is ?
>
This is a special mode of pwm and short for high-intensity zone. If this
mode is enable, when pwm is in "on" time, pin of pwm become hiz state,
the high level is not driven by chips but a pull-up resistor.
> .
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
2021-12-16 6:07 ` qianggui.song
(?)
@ 2021-12-16 9:20 ` Jerome Brunet
-1 siblings, 0 replies; 30+ messages in thread
From: Jerome Brunet @ 2021-12-16 9:20 UTC (permalink / raw)
To: qianggui.song, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
On Thu 16 Dec 2021 at 14:07, qianggui.song <Qianggui.Song@amlogic.com> wrote:
>>> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
>>> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
>>> +
>> [...]
>>
>>> +
>>> +static const char * const tdm_groups[] = {
>>> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
>>> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
>>> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
>>> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
>>> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
>>> +};
>> On previous chip, there were pin assigned to tdm A, B or C.
>> On this generation, it seems you have added a second level on pinmuxing
>> to re-route the audio pins to different controllers
>> In such case, I don't think they belong in the same group.
>> Depending on settins, D2 and D3 could be unrelated
>> I think each audio pin should have its own group (one group for D3, one
>> D4, etc ...)
>>
> According to our audio colleague, on this chip, tdm A/B/C can choose which
> pins are routed to their controllers freely by writing special registers,
> say, tdm_d2_c can be assigned to any of tdm a, b and c by demand, so no
> need to specify a/b/c words any more.
That's basically my comment above. Comment still stands
Each D and FS pin could be related to different interface and should be
in different groups
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-16 9:20 ` Jerome Brunet
0 siblings, 0 replies; 30+ messages in thread
From: Jerome Brunet @ 2021-12-16 9:20 UTC (permalink / raw)
To: qianggui.song, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
On Thu 16 Dec 2021 at 14:07, qianggui.song <Qianggui.Song@amlogic.com> wrote:
>>> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
>>> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
>>> +
>> [...]
>>
>>> +
>>> +static const char * const tdm_groups[] = {
>>> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
>>> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
>>> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
>>> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
>>> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
>>> +};
>> On previous chip, there were pin assigned to tdm A, B or C.
>> On this generation, it seems you have added a second level on pinmuxing
>> to re-route the audio pins to different controllers
>> In such case, I don't think they belong in the same group.
>> Depending on settins, D2 and D3 could be unrelated
>> I think each audio pin should have its own group (one group for D3, one
>> D4, etc ...)
>>
> According to our audio colleague, on this chip, tdm A/B/C can choose which
> pins are routed to their controllers freely by writing special registers,
> say, tdm_d2_c can be assigned to any of tdm a, b and c by demand, so no
> need to specify a/b/c words any more.
That's basically my comment above. Comment still stands
Each D and FS pin could be related to different interface and should be
in different groups
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-16 9:20 ` Jerome Brunet
0 siblings, 0 replies; 30+ messages in thread
From: Jerome Brunet @ 2021-12-16 9:20 UTC (permalink / raw)
To: qianggui.song, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
On Thu 16 Dec 2021 at 14:07, qianggui.song <Qianggui.Song@amlogic.com> wrote:
>>> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
>>> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
>>> +
>> [...]
>>
>>> +
>>> +static const char * const tdm_groups[] = {
>>> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
>>> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
>>> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
>>> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
>>> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
>>> +};
>> On previous chip, there were pin assigned to tdm A, B or C.
>> On this generation, it seems you have added a second level on pinmuxing
>> to re-route the audio pins to different controllers
>> In such case, I don't think they belong in the same group.
>> Depending on settins, D2 and D3 could be unrelated
>> I think each audio pin should have its own group (one group for D3, one
>> D4, etc ...)
>>
> According to our audio colleague, on this chip, tdm A/B/C can choose which
> pins are routed to their controllers freely by writing special registers,
> say, tdm_d2_c can be assigned to any of tdm a, b and c by demand, so no
> need to specify a/b/c words any more.
That's basically my comment above. Comment still stands
Each D and FS pin could be related to different interface and should be
in different groups
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
2021-12-16 9:20 ` Jerome Brunet
@ 2021-12-17 9:23 ` qianggui.song
-1 siblings, 0 replies; 30+ messages in thread
From: qianggui.song @ 2021-12-17 9:23 UTC (permalink / raw)
To: Jerome Brunet, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
Hi, jerome
On 2021/12/16 下午5:20, Jerome Brunet wrote:
>
>
> On Thu 16 Dec 2021 at 14:07, qianggui.song <Qianggui.Song@amlogic.com> wrote:
>
>>>> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
>>>> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
>>>> +
>>> [...]
>>>
>>>> +
>>>> +static const char * const tdm_groups[] = {
>>>> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
>>>> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
>>>> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
>>>> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
>>>> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
>>>> +};
>>> On previous chip, there were pin assigned to tdm A, B or C.
>>> On this generation, it seems you have added a second level on pinmuxing
>>> to re-route the audio pins to different controllers
>>> In such case, I don't think they belong in the same group.
>>> Depending on settins, D2 and D3 could be unrelated
>>> I think each audio pin should have its own group (one group for D3, one
>>> D4, etc ...)
>>>
>> According to our audio colleague, on this chip, tdm A/B/C can choose which
>> pins are routed to their controllers freely by writing special registers,
>> say, tdm_d2_c can be assigned to any of tdm a, b and c by demand, so no
>> need to specify a/b/c words any more.
>
> That's basically my comment above. Comment still stands
> Each D and FS pin could be related to different interface and should be
> in different groups
>
>
>
So I guess below should match above comment, correct me if I’m wrong
static const char * const tdm_d0_groups {
...
};
...
static const char * const tdm_d7_groups {
...
};
static const char * const tdm_fs0_groups {
...
};
static const char * const tdm_fs2_groups {
...
};
static const char * const tdm_sclk0_groups {
...
};
...
static const char * const tdm_sclk2_groups {
...
};
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc
@ 2021-12-17 9:23 ` qianggui.song
0 siblings, 0 replies; 30+ messages in thread
From: qianggui.song @ 2021-12-17 9:23 UTC (permalink / raw)
To: Jerome Brunet, Linus Walleij
Cc: Neil Armstrong, Kevin Hilman, Martin Blumenstingl, Rob Herring,
Mark Rutland, linux-arm-kernel, linux-amlogic, linux-kernel,
linux-gpio
Hi, jerome
On 2021/12/16 下午5:20, Jerome Brunet wrote:
>
>
> On Thu 16 Dec 2021 at 14:07, qianggui.song <Qianggui.Song@amlogic.com> wrote:
>
>>>> +static const unsigned int clk12_24_pins[] = { GPIOD_10 };
>>>> +static const unsigned int pwm_g_hiz_pins[] = { GPIOD_11 };
>>>> +
>>> [...]
>>>
>>>> +
>>>> +static const char * const tdm_groups[] = {
>>>> + "tdm_d2_c", "tdm_d3_c", "tdm_fs1_c", "tdm_d4_c", "tdm_d5_c",
>>>> + "tdm_fs1_d", "tdm_d4_d", "tdm_d3_d", "tdm_d2_d", "tdm_sclk1_d",
>>>> + "tdm_sclk1_h", "tdm_fs1_h", "tdm_d2_h", "tdm_d3_h", "tdm_d4_h",
>>>> + "tdm_d1", "tdm_d0", "tdm_fs0", "tdm_sclk0", "tdm_fs2", "tdm_sclk2",
>>>> + "tdm_d4_z", "tdm_d5_z", "tdm_d6", "tdm_d7"
>>>> +};
>>> On previous chip, there were pin assigned to tdm A, B or C.
>>> On this generation, it seems you have added a second level on pinmuxing
>>> to re-route the audio pins to different controllers
>>> In such case, I don't think they belong in the same group.
>>> Depending on settins, D2 and D3 could be unrelated
>>> I think each audio pin should have its own group (one group for D3, one
>>> D4, etc ...)
>>>
>> According to our audio colleague, on this chip, tdm A/B/C can choose which
>> pins are routed to their controllers freely by writing special registers,
>> say, tdm_d2_c can be assigned to any of tdm a, b and c by demand, so no
>> need to specify a/b/c words any more.
>
> That's basically my comment above. Comment still stands
> Each D and FS pin could be related to different interface and should be
> in different groups
>
>
>
So I guess below should match above comment, correct me if I’m wrong
static const char * const tdm_d0_groups {
...
};
...
static const char * const tdm_d7_groups {
...
};
static const char * const tdm_fs0_groups {
...
};
static const char * const tdm_fs2_groups {
...
};
static const char * const tdm_sclk0_groups {
...
};
...
static const char * const tdm_sclk2_groups {
...
};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2021-12-17 9:24 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-14 2:20 [PATCH 0/3] pinctrl: meson-s4: add pinctrl driver Qianggui Song
2021-12-14 2:20 ` Qianggui Song
2021-12-14 2:20 ` Qianggui Song
2021-12-14 2:20 ` [PATCH 1/3] dt-bindings: pinctrl: meson: Add compatible for S4 Qianggui Song
2021-12-14 2:20 ` Qianggui Song
2021-12-14 2:20 ` Qianggui Song
2021-12-14 2:20 ` [PATCH 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4 Qianggui Song
2021-12-14 2:20 ` Qianggui Song
2021-12-14 2:20 ` Qianggui Song
2021-12-15 20:29 ` Rob Herring
2021-12-15 20:29 ` Rob Herring
2021-12-15 20:29 ` Rob Herring
2021-12-14 2:21 ` [PATCH 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc Qianggui Song
2021-12-14 2:21 ` Qianggui Song
2021-12-14 2:21 ` Qianggui Song
2021-12-14 10:00 ` Jerome Brunet
2021-12-14 10:00 ` Jerome Brunet
2021-12-14 10:00 ` Jerome Brunet
2021-12-16 6:07 ` qianggui.song
2021-12-16 6:07 ` qianggui.song
2021-12-16 9:20 ` Jerome Brunet
2021-12-16 9:20 ` Jerome Brunet
2021-12-16 9:20 ` Jerome Brunet
2021-12-17 9:23 ` qianggui.song
2021-12-17 9:23 ` qianggui.song
2021-12-14 11:57 ` Andy Shevchenko
2021-12-14 11:57 ` Andy Shevchenko
2021-12-14 11:57 ` Andy Shevchenko
2021-12-16 3:24 ` qianggui.song
2021-12-16 3:24 ` qianggui.song
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.