From: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> To: Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it> Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org, "Emmanuel Gil Peyrot" <linkmauve@linkmauve.fr>, linux-kernel@vger.kernel.org, rw-r-r-0644 <r.r.qwertyuiop.r.r@gmail.com>, "Rob Herring" <robh+dt@kernel.org>, "Paul Mackerras" <paulus@samba.org>, "Ash Logan" <ash@heyquark.com>, linuxppc-dev@lists.ozlabs.org, "Jonathan Neuschäfer" <j.ne@posteo.net> Subject: [PATCH v3 3/5] powerpc: wii.dts: Expose HW_SRNPROT on this platform Date: Wed, 15 Dec 2021 18:54:59 +0100 [thread overview] Message-ID: <20211215175501.6761-4-linkmauve@linkmauve.fr> (raw) In-Reply-To: <20211215175501.6761-1-linkmauve@linkmauve.fr> This Hollywood register isn’t properly understood, but can allow or reject access to the SRAM, which we need to set for RTC usage if it isn’t previously set correctly beforehand. See https://wiibrew.org/wiki/Hardware/Hollywood_Registers#HW_SRNPROT Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> --- arch/powerpc/boot/dts/wii.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts index c5720fdd0686..34d9732d5910 100644 --- a/arch/powerpc/boot/dts/wii.dts +++ b/arch/powerpc/boot/dts/wii.dts @@ -175,6 +175,11 @@ PIC1: pic1@d800030 { interrupts = <14>; }; + srnprot@d800060 { + compatible = "nintendo,hollywood-srnprot"; + reg = <0x0d800060 0x4>; + }; + GPIO: gpio@d8000c0 { #gpio-cells = <2>; compatible = "nintendo,hollywood-gpio"; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> To: Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it> Cc: "Emmanuel Gil Peyrot" <linkmauve@linkmauve.fr>, rw-r-r-0644 <r.r.qwertyuiop.r.r@gmail.com>, "Ash Logan" <ash@heyquark.com>, "Jonathan Neuschäfer" <j.ne@posteo.net>, "Rob Herring" <robh+dt@kernel.org>, "Michael Ellerman" <mpe@ellerman.id.au>, "Benjamin Herrenschmidt" <benh@kernel.crashing.org>, "Paul Mackerras" <paulus@samba.org>, linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org Subject: [PATCH v3 3/5] powerpc: wii.dts: Expose HW_SRNPROT on this platform Date: Wed, 15 Dec 2021 18:54:59 +0100 [thread overview] Message-ID: <20211215175501.6761-4-linkmauve@linkmauve.fr> (raw) In-Reply-To: <20211215175501.6761-1-linkmauve@linkmauve.fr> This Hollywood register isn’t properly understood, but can allow or reject access to the SRAM, which we need to set for RTC usage if it isn’t previously set correctly beforehand. See https://wiibrew.org/wiki/Hardware/Hollywood_Registers#HW_SRNPROT Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> --- arch/powerpc/boot/dts/wii.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts index c5720fdd0686..34d9732d5910 100644 --- a/arch/powerpc/boot/dts/wii.dts +++ b/arch/powerpc/boot/dts/wii.dts @@ -175,6 +175,11 @@ PIC1: pic1@d800030 { interrupts = <14>; }; + srnprot@d800060 { + compatible = "nintendo,hollywood-srnprot"; + reg = <0x0d800060 0x4>; + }; + GPIO: gpio@d8000c0 { #gpio-cells = <2>; compatible = "nintendo,hollywood-gpio"; -- 2.34.1
next prev parent reply other threads:[~2021-12-15 17:56 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-14 22:05 [PATCH] rtc: nintendo: Add a RTC driver for the GameCube, Wii and Wii U Emmanuel Gil Peyrot 2021-10-27 16:45 ` Alexandre Belloni 2021-10-27 17:05 ` Emmanuel Gil Peyrot 2021-10-27 17:09 ` Emmanuel Gil Peyrot 2021-10-27 20:32 ` Alexandre Belloni 2021-10-28 20:32 ` Jonathan Neuschäfer 2021-10-28 21:34 ` Emmanuel Gil Peyrot 2021-10-29 11:06 ` Jonathan Neuschäfer 2021-10-27 22:35 ` [PATCH v2 0/5] " Emmanuel Gil Peyrot 2021-10-27 22:35 ` Emmanuel Gil Peyrot 2021-10-27 22:35 ` [PATCH v2 1/5] rtc: gamecube: " Emmanuel Gil Peyrot 2021-10-27 22:35 ` Emmanuel Gil Peyrot 2021-10-27 22:35 ` [PATCH v2 2/5] rtc: gamecube: Report low battery as invalid data Emmanuel Gil Peyrot 2021-10-27 22:35 ` Emmanuel Gil Peyrot 2021-11-30 22:45 ` Alexandre Belloni 2021-11-30 22:45 ` Alexandre Belloni 2021-12-15 17:52 ` Emmanuel Gil Peyrot 2021-12-15 17:52 ` Emmanuel Gil Peyrot 2021-10-27 22:35 ` [PATCH v2 3/5] powerpc: wii.dts: Expose HW_SRNPROT on this platform Emmanuel Gil Peyrot 2021-10-27 22:35 ` Emmanuel Gil Peyrot 2021-10-27 22:35 ` [PATCH v2 4/5] powerpc: gamecube_defconfig: Enable the RTC driver Emmanuel Gil Peyrot 2021-10-27 22:35 ` Emmanuel Gil Peyrot 2021-10-27 22:35 ` [PATCH v2 5/5] powerpc: wii_defconfig: " Emmanuel Gil Peyrot 2021-10-27 22:35 ` Emmanuel Gil Peyrot 2021-12-15 17:54 ` [PATCH v3 0/5] rtc: nintendo: Add a RTC driver for the GameCube, Wii and Wii U Emmanuel Gil Peyrot 2021-12-15 17:54 ` Emmanuel Gil Peyrot 2021-12-15 17:54 ` [PATCH v3 1/5] rtc: gamecube: " Emmanuel Gil Peyrot 2021-12-15 17:54 ` Emmanuel Gil Peyrot 2021-12-15 17:54 ` [PATCH v3 2/5] rtc: gamecube: Report low battery as invalid data Emmanuel Gil Peyrot 2021-12-15 17:54 ` Emmanuel Gil Peyrot 2021-12-15 17:54 ` Emmanuel Gil Peyrot [this message] 2021-12-15 17:54 ` [PATCH v3 3/5] powerpc: wii.dts: Expose HW_SRNPROT on this platform Emmanuel Gil Peyrot 2021-12-15 17:55 ` [PATCH v3 4/5] powerpc: gamecube_defconfig: Enable the RTC driver Emmanuel Gil Peyrot 2021-12-15 17:55 ` Emmanuel Gil Peyrot 2021-12-15 17:55 ` [PATCH v3 5/5] powerpc: wii_defconfig: " Emmanuel Gil Peyrot 2021-12-15 17:55 ` Emmanuel Gil Peyrot 2021-12-16 4:52 ` [PATCH v3 0/5] rtc: nintendo: Add a RTC driver for the GameCube, Wii and Wii U Michael Ellerman 2021-12-16 4:52 ` Michael Ellerman 2021-12-16 9:50 ` Alexandre Belloni 2021-12-16 9:50 ` Alexandre Belloni 2021-12-16 9:49 ` Alexandre Belloni 2021-12-16 9:49 ` Alexandre Belloni 2021-12-16 20:22 ` Emmanuel Gil Peyrot 2021-12-16 20:22 ` Emmanuel Gil Peyrot 2021-12-16 20:56 ` Alexandre Belloni 2021-12-16 20:56 ` Alexandre Belloni 2021-12-16 20:58 ` Emmanuel Gil Peyrot 2021-12-16 20:58 ` Emmanuel Gil Peyrot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211215175501.6761-4-linkmauve@linkmauve.fr \ --to=linkmauve@linkmauve.fr \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=ash@heyquark.com \ --cc=devicetree@vger.kernel.org \ --cc=j.ne@posteo.net \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rtc@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=paulus@samba.org \ --cc=r.r.qwertyuiop.r.r@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.