From: Felix Fietkau <nbd@nbd.name> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, soc@kernel.org, Rob Herring <robh+dt@kernel.org> Cc: john@phrozen.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v7 03/14] ARM: dts: Add basic support for Airoha EN7523 Date: Fri, 17 Dec 2021 12:23:33 +0100 [thread overview] Message-ID: <20211217112345.14029-4-nbd@nbd.name> (raw) In-Reply-To: <20211217112345.14029-1-nbd@nbd.name> From: John Crispin <john@phrozen.org> Add basic support for Airoha EN7523, enough for booting to console. The UART is basically 8250-compatible, except for the clock selection. A clock-frequency value is synthesized to get this to run at 115200 bps. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Bert Vermeulen <bert@biot.com> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/en7523-evb.dts | 27 ++++++++ arch/arm/boot/dts/en7523.dtsi | 114 +++++++++++++++++++++++++++++++ 3 files changed, 143 insertions(+) create mode 100644 arch/arm/boot/dts/en7523-evb.dts create mode 100644 arch/arm/boot/dts/en7523.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..81cb49f8d6fd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -186,6 +186,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-lego-ev3.dtb dtb-$(CONFIG_ARCH_DIGICOLOR) += \ cx92755_equinox.dtb +dtb-$(CONFIG_ARCH_AIROHA) += \ + en7523-evb.dtb dtb-$(CONFIG_ARCH_EXYNOS3) += \ exynos3250-artik5-eval.dtb \ exynos3250-monk.dtb \ diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts new file mode 100644 index 000000000000..69754ef9a628 --- /dev/null +++ b/arch/arm/boot/dts/en7523-evb.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +/* Bootloader installs ATF here */ +/memreserve/ 0x80000000 0x200000; + +#include "en7523.dtsi" + +/ { + model = "Airoha EN7523 Evaluation Board"; + compatible = "airoha,en7523-evb", "airoha,en7523"; + + aliases { + serial0 = &uart1; + }; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + stdout-path = "serial0:115200n8"; + linux,usable-memory-range = <0x80200000 0x1fe00000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi new file mode 100644 index 000000000000..7e17311a3f90 --- /dev/null +++ b/arch/arm/boot/dts/en7523.dtsi @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + npu_binary@84000000 { + no-map; + reg = <0x84000000 0xA00000>; + }; + + npu_flag@84B0000 { + no-map; + reg = <0x84B00000 0x100000>; + }; + + npu_pkt@85000000 { + no-map; + reg = <0x85000000 0x1A00000>; + }; + + npu_phyaddr@86B00000 { + no-map; + reg = <0x86B00000 0x100000>; + }; + + npu_rxdesc@86D00000 { + no-map; + reg = <0x86D00000 0x100000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@9000000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x09000000 0x20000>, <0x09080000 0x80000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <25000000>; + }; + + uart1: serial@1fbf0000 { + compatible = "ns16550"; + reg = <0x1fbf0000 0x30>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <1843200>; + status = "okay"; + }; +}; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Felix Fietkau <nbd@nbd.name> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, soc@kernel.org, Rob Herring <robh+dt@kernel.org> Cc: john@phrozen.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v7 03/14] ARM: dts: Add basic support for Airoha EN7523 Date: Fri, 17 Dec 2021 12:23:33 +0100 [thread overview] Message-ID: <20211217112345.14029-4-nbd@nbd.name> (raw) In-Reply-To: <20211217112345.14029-1-nbd@nbd.name> From: John Crispin <john@phrozen.org> Add basic support for Airoha EN7523, enough for booting to console. The UART is basically 8250-compatible, except for the clock selection. A clock-frequency value is synthesized to get this to run at 115200 bps. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Bert Vermeulen <bert@biot.com> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/en7523-evb.dts | 27 ++++++++ arch/arm/boot/dts/en7523.dtsi | 114 +++++++++++++++++++++++++++++++ 3 files changed, 143 insertions(+) create mode 100644 arch/arm/boot/dts/en7523-evb.dts create mode 100644 arch/arm/boot/dts/en7523.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..81cb49f8d6fd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -186,6 +186,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-lego-ev3.dtb dtb-$(CONFIG_ARCH_DIGICOLOR) += \ cx92755_equinox.dtb +dtb-$(CONFIG_ARCH_AIROHA) += \ + en7523-evb.dtb dtb-$(CONFIG_ARCH_EXYNOS3) += \ exynos3250-artik5-eval.dtb \ exynos3250-monk.dtb \ diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts new file mode 100644 index 000000000000..69754ef9a628 --- /dev/null +++ b/arch/arm/boot/dts/en7523-evb.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +/* Bootloader installs ATF here */ +/memreserve/ 0x80000000 0x200000; + +#include "en7523.dtsi" + +/ { + model = "Airoha EN7523 Evaluation Board"; + compatible = "airoha,en7523-evb", "airoha,en7523"; + + aliases { + serial0 = &uart1; + }; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + stdout-path = "serial0:115200n8"; + linux,usable-memory-range = <0x80200000 0x1fe00000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi new file mode 100644 index 000000000000..7e17311a3f90 --- /dev/null +++ b/arch/arm/boot/dts/en7523.dtsi @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + npu_binary@84000000 { + no-map; + reg = <0x84000000 0xA00000>; + }; + + npu_flag@84B0000 { + no-map; + reg = <0x84B00000 0x100000>; + }; + + npu_pkt@85000000 { + no-map; + reg = <0x85000000 0x1A00000>; + }; + + npu_phyaddr@86B00000 { + no-map; + reg = <0x86B00000 0x100000>; + }; + + npu_rxdesc@86D00000 { + no-map; + reg = <0x86D00000 0x100000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + clock-frequency = <80000000>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@9000000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x09000000 0x20000>, <0x09080000 0x80000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <25000000>; + }; + + uart1: serial@1fbf0000 { + compatible = "ns16550"; + reg = <0x1fbf0000 0x30>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <1843200>; + status = "okay"; + }; +}; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-12-17 11:24 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-17 11:23 [PATCH v7 00/14] Add support for Airoha EN7523 SoC Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 01/14] dt-bindings: Add vendor prefix for Airoha Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 02/14] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau [this message] 2021-12-17 11:23 ` [PATCH v7 03/14] ARM: dts: Add basic support for Airoha EN7523 Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 04/14] ARM: Add basic support for Airoha EN7523 SoC Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 05/14] ARM: multi_v7_defconfig: Add " Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 06/14] dt-bindings: Add en7523-scu device tree binding documentation Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2022-01-06 1:30 ` Stephen Boyd 2022-01-06 1:30 ` Stephen Boyd 2021-12-17 11:23 ` [PATCH v7 07/14] clk: en7523: Add clock driver for Airoha EN7523 SoC Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-18 23:12 ` kernel test robot 2021-12-18 23:12 ` kernel test robot 2021-12-18 23:12 ` kernel test robot 2022-01-06 1:29 ` Stephen Boyd 2022-01-06 1:29 ` Stephen Boyd 2021-12-17 11:23 ` [PATCH v7 08/14] ARM: dts: add clock support for Airoha EN7523 Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 09/14] dt-bindings: PCI: Add support for Airoha EN7532 Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 16:21 ` Bjorn Helgaas 2021-12-17 16:21 ` Bjorn Helgaas 2021-12-17 16:21 ` Bjorn Helgaas 2021-12-17 11:23 ` [PATCH v7 10/14] PCI: mediatek: Allow selecting controller driver for airoha arch Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 16:25 ` Bjorn Helgaas 2021-12-17 16:25 ` Bjorn Helgaas 2021-12-17 16:25 ` Bjorn Helgaas 2021-12-17 11:23 ` [PATCH v7 11/14] ARM: dts: Add PCIe support for Airoha EN7523 Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 12/14] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-17 11:23 ` [PATCH v7 13/14] gpio: Add support for Airoha EN7523 " Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau 2021-12-22 2:06 ` Linus Walleij 2021-12-22 2:06 ` Linus Walleij 2021-12-22 7:56 ` Bartosz Golaszewski 2021-12-22 7:56 ` Bartosz Golaszewski 2021-12-17 11:23 ` [PATCH v7 14/14] ARM: dts: add GPIO support for Airoha EN7523 Felix Fietkau 2021-12-17 11:23 ` Felix Fietkau
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211217112345.14029-4-nbd@nbd.name \ --to=nbd@nbd.name \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=john@phrozen.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.