[PATCH 4.4 00/23] 4.4.296-rc1 review

[PATCH 4.4 00/23] 4.4.296-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.296 release.
There are 23 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.296-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.296-rc1

Juergen Gross <jgross@suse.com>
    xen/netback: don't queue unlimited number of packages

Juergen Gross <jgross@suse.com>
    xen/console: harden hvc_xen against event channel storms

Juergen Gross <jgross@suse.com>
    xen/netfront: harden netfront against event channel storms

Juergen Gross <jgross@suse.com>
    xen/blkfront: harden blkfront against event channel storms

Nathan Chancellor <nathan@kernel.org>
    Input: touchscreen - avoid bitwise vs logical OR warning

Nicolas Pitre <nicolas.pitre@linaro.org>
    ARM: 8805/2: remove unneeded naked function usage

Nathan Chancellor <natechancellor@gmail.com>
    net: lan78xx: Avoid unnecessary self assignment

Florian Fainelli <f.fainelli@gmail.com>
    net: systemport: Add global locking for descriptor lifecycle

Yu Liao <liaoyu15@huawei.com>
    timekeeping: Really make sure wall_to_monotonic isn't positive

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit FN990 compositions

Thomas Gleixner <tglx@linutronix.de>
    PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    USB: gadget: bRequestType is a bitfield, not a enum

Letu Ren <fantasquex@gmail.com>
    igbvf: fix double free in `igbvf_probe`

Nathan Chancellor <nathan@kernel.org>
    soc/tegra: fuse: Fix bitwise vs. logical OR warning

J. Bruce Fields <bfields@redhat.com>
    nfsd: fix use-after-free due to delegation race

Joe Thornber <ejt@redhat.com>
    dm btree remove: fix use after free in rebalance_children()

Jerome Marchand <jmarchan@redhat.com>
    recordmcount.pl: look for jgnop instruction as well as bcrl on s390

Felix Fietkau <nbd@nbd.name>
    mac80211: send ADDBA requests using the tid/queue of the aggregation session

Armin Wolf <W_Armin@gmx.de>
    hwmon: (dell-smm) Fix warning on /proc/i8k creation error

Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
    net: netlink: af_netlink: Prevent empty skb by adding a check on len.

Ondrej Jirman <megous@megous.com>
    i2c: rk3x: Handle a spurious start completion interrupt flag

Helge Deller <deller@gmx.de>
    parisc/agp: Annotate parisc agp init functions with __init

Tadeusz Struk <tadeusz.struk@linaro.org>
    nfc: fix segfault in nfc_genl_dump_devices_done


-------------

Diffstat:

 Makefile                                     |   4 +-
 arch/arm/mm/copypage-fa.c                    |  35 ++++----
 arch/arm/mm/copypage-feroceon.c              |  98 ++++++++++-----------
 arch/arm/mm/copypage-v4mc.c                  |  19 ++--
 arch/arm/mm/copypage-v4wb.c                  |  41 +++++----
 arch/arm/mm/copypage-v4wt.c                  |  37 ++++----
 arch/arm/mm/copypage-xsc3.c                  |  71 +++++++--------
 arch/arm/mm/copypage-xscale.c                |  71 ++++++++-------
 drivers/block/xen-blkfront.c                 |  12 ++-
 drivers/char/agp/parisc-agp.c                |   6 +-
 drivers/hwmon/dell-smm-hwmon.c               |   7 +-
 drivers/i2c/busses/i2c-rk3x.c                |   4 +-
 drivers/input/touchscreen/of_touchscreen.c   |  18 ++--
 drivers/md/persistent-data/dm-btree-remove.c |   2 +-
 drivers/net/ethernet/broadcom/bcmsysport.c   |   5 ++
 drivers/net/ethernet/broadcom/bcmsysport.h   |   1 +
 drivers/net/ethernet/intel/igbvf/netdev.c    |   1 +
 drivers/net/usb/lan78xx.c                    |   6 +-
 drivers/net/xen-netback/netback.c            |  13 ++-
 drivers/net/xen-netfront.c                   | 125 ++++++++++++++++++++-------
 drivers/pci/msi.c                            |   2 +-
 drivers/soc/tegra/fuse/fuse-tegra.c          |   2 +-
 drivers/soc/tegra/fuse/fuse.h                |   2 +-
 drivers/tty/hvc/hvc_xen.c                    |  30 ++++++-
 drivers/usb/gadget/composite.c               |   6 +-
 drivers/usb/gadget/legacy/dbgp.c             |   6 +-
 drivers/usb/gadget/legacy/inode.c            |   6 +-
 drivers/usb/serial/option.c                  |   8 ++
 fs/nfsd/nfs4state.c                          |   9 +-
 kernel/time/timekeeping.c                    |   3 +-
 net/mac80211/agg-tx.c                        |   2 +-
 net/netlink/af_netlink.c                     |   5 ++
 net/nfc/netlink.c                            |   6 +-
 scripts/recordmcount.pl                      |   2 +-
 34 files changed, 388 insertions(+), 277 deletions(-)

[PATCH 4.4 01/23] nfc: fix segfault in nfc_genl_dump_devices_done

[Greg Kroah-Hartman]

From: Tadeusz Struk <tadeusz.struk@linaro.org>

commit fd79a0cbf0b2e34bcc45b13acf962e2032a82203 upstream.

When kmalloc in nfc_genl_dump_devices() fails then
nfc_genl_dump_devices_done() segfaults as below

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:klist_iter_exit+0x26/0x80
Call Trace:
<TASK>
class_dev_iter_exit+0x15/0x20
nfc_genl_dump_devices_done+0x3b/0x50
genl_lock_done+0x84/0xd0
netlink_sock_destruct+0x8f/0x270
__sk_destruct+0x64/0x3b0
sk_destruct+0xa8/0xd0
__sk_free+0x2e8/0x3d0
sk_free+0x51/0x90
netlink_sock_destruct_work+0x1c/0x20
process_one_work+0x411/0x710
worker_thread+0x6fd/0xa80

Link: https://syzkaller.appspot.com/bug?id=fc0fa5a53db9edd261d56e74325419faf18bd0df
Reported-by: syzbot+f9f76f4a0766420b4a02@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211208182742.340542-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/netlink.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -632,8 +632,10 @@ static int nfc_genl_dump_devices_done(st
 {
 	struct class_dev_iter *iter = (struct class_dev_iter *) cb->args[0];
 
-	nfc_device_iter_exit(iter);
-	kfree(iter);
+	if (iter) {
+		nfc_device_iter_exit(iter);
+		kfree(iter);
+	}
 
 	return 0;
 }

[PATCH 4.4 02/23] parisc/agp: Annotate parisc agp init functions with __init

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 8d88382b7436551a9ebb78475c546b670790cbf6 ]

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/agp/parisc-agp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index 15f2e7025b78e..1d5510cb6db4e 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -285,7 +285,7 @@ agp_ioc_init(void __iomem *ioc_regs)
         return 0;
 }
 
-static int
+static int __init
 lba_find_capability(int cap)
 {
 	struct _parisc_agp_info *info = &parisc_agp_info;
@@ -370,7 +370,7 @@ parisc_agp_setup(void __iomem *ioc_hpa, void __iomem *lba_hpa)
 	return error;
 }
 
-static int
+static int __init
 find_quicksilver(struct device *dev, void *data)
 {
 	struct parisc_device **lba = data;
@@ -382,7 +382,7 @@ find_quicksilver(struct device *dev, void *data)
 	return 0;
 }
 
-static int
+static int __init
 parisc_agp_init(void)
 {
 	extern struct sba_device *sba_list;
-- 
2.33.0

[PATCH 4.4 03/23] i2c: rk3x: Handle a spurious start completion interrupt flag

[Greg Kroah-Hartman]

From: Ondrej Jirman <megous@megous.com>

[ Upstream commit 02fe0fbd8a21e183687925c3a266ae27dda9840f ]

In a typical read transfer, start completion flag is being set after
read finishes (notice ipd bit 4 being set):

trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33

This causes I2C transfer being aborted in polled mode from a stop completion
handler:

trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10

Clearing the START flag after read fixes the issue without any obvious
side effects.

This issue was dicovered on RK3566 when adding support for powering
off the RK817 PMIC.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-rk3x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 9096d17beb5bb..587f1a5a10243 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -325,8 +325,8 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
 	if (!(ipd & REG_INT_MBRF))
 		return;
 
-	/* ack interrupt */
-	i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
+	/* ack interrupt (read also produces a spurious START flag, clear it too) */
+	i2c_writel(i2c, REG_INT_MBRF | REG_INT_START, REG_IPD);
 
 	/* Can only handle a maximum of 32 bytes at a time */
 	if (len > 32)
-- 
2.33.0

[PATCH 4.4 04/23] net: netlink: af_netlink: Prevent empty skb by adding a check on len.

[Greg Kroah-Hartman]

From: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

[ Upstream commit f123cffdd8fe8ea6c7fded4b88516a42798797d0 ]

Adding a check on len parameter to avoid empty skb. This prevents a
division error in netem_enqueue function which is caused when skb->len=0
and skb->data_len=0 in the randomized corruption step as shown below.

skb->data[prandom_u32() % skb_headlen(skb)] ^= 1<<(prandom_u32() % 8);

Crash Report:
[  343.170349] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family
0 port 6081 - 0
[  343.216110] netem: version 1.3
[  343.235841] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
[  343.236680] CPU: 3 PID: 4288 Comm: reproducer Not tainted 5.16.0-rc1+
[  343.237569] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-2.el7 04/01/2014
[  343.238707] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.239499] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.241883] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.242589] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.243542] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.244474] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.245403] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.246355] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.247291] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.248350] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.249120] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.250076] Call Trace:
[  343.250423]  <TASK>
[  343.250713]  ? memcpy+0x4d/0x60
[  343.251162]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.251795]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.252443]  netem_enqueue+0xe28/0x33c0 [sch_netem]
[  343.253102]  ? stack_trace_save+0x87/0xb0
[  343.253655]  ? filter_irq_stacks+0xb0/0xb0
[  343.254220]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.254837]  ? __kasan_check_write+0x14/0x20
[  343.255418]  ? _raw_spin_lock+0x88/0xd6
[  343.255953]  dev_qdisc_enqueue+0x50/0x180
[  343.256508]  __dev_queue_xmit+0x1a7e/0x3090
[  343.257083]  ? netdev_core_pick_tx+0x300/0x300
[  343.257690]  ? check_kcov_mode+0x10/0x40
[  343.258219]  ? _raw_spin_unlock_irqrestore+0x29/0x40
[  343.258899]  ? __kasan_init_slab_obj+0x24/0x30
[  343.259529]  ? setup_object.isra.71+0x23/0x90
[  343.260121]  ? new_slab+0x26e/0x4b0
[  343.260609]  ? kasan_poison+0x3a/0x50
[  343.261118]  ? kasan_unpoison+0x28/0x50
[  343.261637]  ? __kasan_slab_alloc+0x71/0x90
[  343.262214]  ? memcpy+0x4d/0x60
[  343.262674]  ? write_comp_data+0x2f/0x90
[  343.263209]  ? __kasan_check_write+0x14/0x20
[  343.263802]  ? __skb_clone+0x5d6/0x840
[  343.264329]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.264958]  dev_queue_xmit+0x1c/0x20
[  343.265470]  netlink_deliver_tap+0x652/0x9c0
[  343.266067]  netlink_unicast+0x5a0/0x7f0
[  343.266608]  ? netlink_attachskb+0x860/0x860
[  343.267183]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.267820]  ? write_comp_data+0x2f/0x90
[  343.268367]  netlink_sendmsg+0x922/0xe80
[  343.268899]  ? netlink_unicast+0x7f0/0x7f0
[  343.269472]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.270099]  ? write_comp_data+0x2f/0x90
[  343.270644]  ? netlink_unicast+0x7f0/0x7f0
[  343.271210]  sock_sendmsg+0x155/0x190
[  343.271721]  ____sys_sendmsg+0x75f/0x8f0
[  343.272262]  ? kernel_sendmsg+0x60/0x60
[  343.272788]  ? write_comp_data+0x2f/0x90
[  343.273332]  ? write_comp_data+0x2f/0x90
[  343.273869]  ___sys_sendmsg+0x10f/0x190
[  343.274405]  ? sendmsg_copy_msghdr+0x80/0x80
[  343.274984]  ? slab_post_alloc_hook+0x70/0x230
[  343.275597]  ? futex_wait_setup+0x240/0x240
[  343.276175]  ? security_file_alloc+0x3e/0x170
[  343.276779]  ? write_comp_data+0x2f/0x90
[  343.277313]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.277969]  ? write_comp_data+0x2f/0x90
[  343.278515]  ? __fget_files+0x1ad/0x260
[  343.279048]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.279685]  ? write_comp_data+0x2f/0x90
[  343.280234]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.280874]  ? sockfd_lookup_light+0xd1/0x190
[  343.281481]  __sys_sendmsg+0x118/0x200
[  343.281998]  ? __sys_sendmsg_sock+0x40/0x40
[  343.282578]  ? alloc_fd+0x229/0x5e0
[  343.283070]  ? write_comp_data+0x2f/0x90
[  343.283610]  ? write_comp_data+0x2f/0x90
[  343.284135]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.284776]  ? ktime_get_coarse_real_ts64+0xb8/0xf0
[  343.285450]  __x64_sys_sendmsg+0x7d/0xc0
[  343.285981]  ? syscall_enter_from_user_mode+0x4d/0x70
[  343.286664]  do_syscall_64+0x3a/0x80
[  343.287158]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  343.287850] RIP: 0033:0x7fdde24cf289
[  343.288344] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00
48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 db 2c 00 f7 d8 64 89 01 48
[  343.290729] RSP: 002b:00007fdde2bd6d98 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[  343.291730] RAX: ffffffffffffffda RBX: 0000000000000000 RCX:
00007fdde24cf289
[  343.292673] RDX: 0000000000000000 RSI: 00000000200000c0 RDI:
0000000000000004
[  343.293618] RBP: 00007fdde2bd6e20 R08: 0000000100000001 R09:
0000000000000000
[  343.294557] R10: 0000000100000001 R11: 0000000000000246 R12:
0000000000000000
[  343.295493] R13: 0000000000021000 R14: 0000000000000000 R15:
00007fdde2bd7700
[  343.296432]  </TASK>
[  343.296735] Modules linked in: sch_netem ip6_vti ip_vti ip_gre ipip
sit ip_tunnel geneve macsec macvtap tap ipvlan macvlan 8021q garp mrp
hsr wireguard libchacha20poly1305 chacha_x86_64 poly1305_x86_64
ip6_udp_tunnel udp_tunnel libblake2s blake2s_x86_64 libblake2s_generic
curve25519_x86_64 libcurve25519_generic libchacha xfrm_interface
xfrm6_tunnel tunnel4 veth netdevsim psample batman_adv nlmon dummy team
bonding tls vcan ip6_gre ip6_tunnel tunnel6 gre tun ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set
ebtable_nat ebtable_broute ip6table_nat ip6table_mangle
ip6table_security ip6table_raw iptable_nat nf_nat nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_security
iptable_raw ebtable_filter ebtables rfkill ip6table_filter ip6_tables
iptable_filter ppdev bochs drm_vram_helper drm_ttm_helper ttm
drm_kms_helper cec parport_pc drm joydev floppy parport sg syscopyarea
sysfillrect sysimgblt i2c_piix4 qemu_fw_cfg fb_sys_fops pcspkr
[  343.297459]  ip_tables xfs virtio_net net_failover failover sd_mod
sr_mod cdrom t10_pi ata_generic pata_acpi ata_piix libata virtio_pci
virtio_pci_legacy_dev serio_raw virtio_pci_modern_dev dm_mirror
dm_region_hash dm_log dm_mod
[  343.311074] Dumping ftrace buffer:
[  343.311532]    (ftrace buffer empty)
[  343.312040] ---[ end trace a2e3db5a6ae05099 ]---
[  343.312691] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.313481] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.315893] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.316622] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.317585] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.318549] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.319503] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.320455] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.321414] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.322489] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.323283] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.324264] Kernel panic - not syncing: Fatal exception in interrupt
[  343.333717] Dumping ftrace buffer:
[  343.334175]    (ftrace buffer empty)
[  343.334653] Kernel Offset: 0x13600000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  343.336027] Rebooting in 86400 seconds..

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20211129175328.55339-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlink/af_netlink.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 65cf129eaad33..2f23b7fef8ef7 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1804,6 +1804,11 @@ static int netlink_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	if (msg->msg_flags&MSG_OOB)
 		return -EOPNOTSUPP;
 
+	if (len == 0) {
+		pr_warn_once("Zero length message leads to an empty skb\n");
+		return -ENODATA;
+	}
+
 	err = scm_send(sock, msg, &scm, true);
 	if (err < 0)
 		return err;
-- 
2.33.0

[PATCH 4.4 05/23] hwmon: (dell-smm) Fix warning on /proc/i8k creation error

[Greg Kroah-Hartman]

From: Armin Wolf <W_Armin@gmx.de>

commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream.

The removal function is called regardless of whether
/proc/i8k was created successfully or not, the later
causing a WARN() on module removal.
Fix that by only registering the removal function
if /proc/i8k was created successfully.

Tested on a Inspiron 3505.

Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/dell-smm-hwmon.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -551,15 +551,18 @@ static const struct file_operations i8k_
 	.unlocked_ioctl	= i8k_ioctl,
 };
 
+static struct proc_dir_entry *entry;
+
 static void __init i8k_init_procfs(void)
 {
 	/* Register the proc entry */
-	proc_create("i8k", 0, NULL, &i8k_fops);
+	entry = proc_create("i8k", 0, NULL, &i8k_fops);
 }
 
 static void __exit i8k_exit_procfs(void)
 {
-	remove_proc_entry("i8k", NULL);
+	if (entry)
+		remove_proc_entry("i8k", NULL);
 }
 
 #else

[PATCH 4.4 06/23] mac80211: send ADDBA requests using the tid/queue of the aggregation session

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

commit 1fe98f5690c4219d419ea9cc190f94b3401cf324 upstream.

Sending them out on a different queue can cause a race condition where a
number of packets in the queue may be discarded by the receiver, because
the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate
packet seqno in hardware on tx, regardless of whether iTXQ is used or not.
The only driver I've seen that explicitly deals with this issue internally
is mwl8k.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/agg-tx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -109,7 +109,7 @@ static void ieee80211_send_addba_request
 	mgmt->u.action.u.addba_req.start_seq_num =
 					cpu_to_le16(start_seq_num << 4);
 
-	ieee80211_tx_skb(sdata, skb);
+	ieee80211_tx_skb_tid(sdata, skb, tid);
 }
 
 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)

[PATCH 4.4 07/23] recordmcount.pl: look for jgnop instruction as well as bcrl on s390

[Greg Kroah-Hartman]

From: Jerome Marchand <jmarchan@redhat.com>

commit 85bf17b28f97ca2749968d8786dc423db320d9c2 upstream.

On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in
the objdump -d outpout. However since binutils 2.37, objdump -d
display "jgnop <xxx>" for the same instruction. Update the
mcount_regex so that it accepts both.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211210093827.1623286-1-jmarchan@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/recordmcount.pl |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -248,7 +248,7 @@ if ($arch eq "x86_64") {
 
 } elsif ($arch eq "s390" && $bits == 64) {
     if ($cc =~ /-DCC_USING_HOTPATCH/) {
-	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*brcl\\s*0,[0-9a-f]+ <([^\+]*)>\$";
+	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*(bcrl\\s*0,|jgnop\\s*)[0-9a-f]+ <([^\+]*)>\$";
 	$mcount_adjust = 0;
     } else {
 	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";

[PATCH 4.4 08/23] dm btree remove: fix use after free in rebalance_children()

[Greg Kroah-Hartman]

From: Joe Thornber <ejt@redhat.com>

commit 1b8d2789dad0005fd5e7d35dab26a8e1203fb6da upstream.

Move dm_tm_unlock() after dm_tm_dec().

Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/persistent-data/dm-btree-remove.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/persistent-data/dm-btree-remove.c
+++ b/drivers/md/persistent-data/dm-btree-remove.c
@@ -423,9 +423,9 @@ static int rebalance_children(struct sha
 
 		memcpy(n, dm_block_data(child),
 		       dm_bm_block_size(dm_tm_get_bm(info->tm)));
-		dm_tm_unlock(info->tm, child);
 
 		dm_tm_dec(info->tm, dm_block_location(child));
+		dm_tm_unlock(info->tm, child);
 		return 0;
 	}
 

[PATCH 4.4 09/23] nfsd: fix use-after-free due to delegation race

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

commit 548ec0805c399c65ed66c6641be467f717833ab5 upstream.

A delegation break could arrive as soon as we've called vfs_setlease.  A
delegation break runs a callback which immediately (in
nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru.  If we
then exit nfs4_set_delegation without hashing the delegation, it will be
freed as soon as the callback is done with it, without ever being
removed from del_recall_lru.

Symptoms show up later as use-after-free or list corruption warnings,
usually in the laundromat thread.

I suspect aba2072f4523 "nfsd: grant read delegations to clients holding
writes" made this bug easier to hit, but I looked as far back as v3.0
and it looks to me it already had the same problem.  So I'm not sure
where the bug was introduced; it may have been there from the beginning.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[Salvatore Bonaccorso: Backport for context changes to versions which do
not have 20b7d86f29d3 ("nfsd: use boottime for lease expiry calculation")]
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs4state.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -844,6 +844,11 @@ hash_delegation_locked(struct nfs4_deleg
 	return 0;
 }
 
+static bool delegation_hashed(struct nfs4_delegation *dp)
+{
+	return !(list_empty(&dp->dl_perfile));
+}
+
 static bool
 unhash_delegation_locked(struct nfs4_delegation *dp)
 {
@@ -851,7 +856,7 @@ unhash_delegation_locked(struct nfs4_del
 
 	lockdep_assert_held(&state_lock);
 
-	if (list_empty(&dp->dl_perfile))
+	if (!delegation_hashed(dp))
 		return false;
 
 	dp->dl_stid.sc_type = NFS4_CLOSED_DELEG_STID;
@@ -3656,7 +3661,7 @@ static void nfsd4_cb_recall_prepare(stru
 	 * queued for a lease break. Don't queue it again.
 	 */
 	spin_lock(&state_lock);
-	if (dp->dl_time == 0) {
+	if (delegation_hashed(dp) && dp->dl_time == 0) {
 		dp->dl_time = get_seconds();
 		list_add_tail(&dp->dl_recall_lru, &nn->del_recall_lru);
 	}

[PATCH 4.4 10/23] soc/tegra: fuse: Fix bitwise vs. logical OR warning

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit a7083763619f7485ccdade160deb81737cf2732f ]

A new warning in clang points out two instances where boolean
expressions are being used with a bitwise OR instead of logical OR:

drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
                reg = tegra_fuse_read_spare(i) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning
2 warnings generated.

The motivation for the warning is that logical operations short circuit
while bitwise operations do not.

In this instance, tegra_fuse_read_spare() is not semantically returning
a boolean, it is returning a bit value. Use u32 for its return type so
that it can be used with either bitwise or boolean operators without any
warnings.

Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification")
Link: https://github.com/ClangBuiltLinux/linux/issues/1488
Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/tegra/fuse/fuse-tegra.c | 2 +-
 drivers/soc/tegra/fuse/fuse.h       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index c4f5e5bbb8dce..9397e8ba26469 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -176,7 +176,7 @@ static struct platform_driver tegra_fuse_driver = {
 };
 module_platform_driver(tegra_fuse_driver);
 
-bool __init tegra_fuse_read_spare(unsigned int spare)
+u32 __init tegra_fuse_read_spare(unsigned int spare)
 {
 	unsigned int offset = fuse->soc->info->spare + spare * 4;
 
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
index 10c2076d5089a..f368bd5373088 100644
--- a/drivers/soc/tegra/fuse/fuse.h
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -62,7 +62,7 @@ struct tegra_fuse {
 void tegra_init_revision(void);
 void tegra_init_apbmisc(void);
 
-bool __init tegra_fuse_read_spare(unsigned int spare);
+u32 __init tegra_fuse_read_spare(unsigned int spare);
 u32 __init tegra_fuse_read_early(unsigned int offset);
 
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
-- 
2.33.0

[PATCH 4.4 11/23] igbvf: fix double free in `igbvf_probe`

[Greg Kroah-Hartman]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit b6d335a60dc624c0d279333b22c737faa765b028 ]

In `igbvf_probe`, if register_netdev() fails, the program will go to
label err_hw_init, and then to label err_ioremap. In free_netdev() which
is just below label err_ioremap, there is `list_for_each_entry_safe` and
`netif_napi_del` which aims to delete all entries in `dev->napi_list`.
The program has added an entry `adapter->rx_ring->napi` which is added by
`netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has
been freed below label err_hw_init. So this a UAF.

In terms of how to patch the problem, we can refer to igbvf_remove() and
delete the entry before `adapter->rx_ring`.

The KASAN logs are as follows:

[   35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450
[   35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366
[   35.128360]
[   35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14
[   35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[   35.131749] Call Trace:
[   35.132199]  dump_stack_lvl+0x59/0x7b
[   35.132865]  print_address_description+0x7c/0x3b0
[   35.133707]  ? free_netdev+0x1fd/0x450
[   35.134378]  __kasan_report+0x160/0x1c0
[   35.135063]  ? free_netdev+0x1fd/0x450
[   35.135738]  kasan_report+0x4b/0x70
[   35.136367]  free_netdev+0x1fd/0x450
[   35.137006]  igbvf_probe+0x121d/0x1a10 [igbvf]
[   35.137808]  ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf]
[   35.138751]  local_pci_probe+0x13c/0x1f0
[   35.139461]  pci_device_probe+0x37e/0x6c0
[   35.165526]
[   35.165806] Allocated by task 366:
[   35.166414]  ____kasan_kmalloc+0xc4/0xf0
[   35.167117]  foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf]
[   35.168078]  igbvf_probe+0x9c5/0x1a10 [igbvf]
[   35.168866]  local_pci_probe+0x13c/0x1f0
[   35.169565]  pci_device_probe+0x37e/0x6c0
[   35.179713]
[   35.179993] Freed by task 366:
[   35.180539]  kasan_set_track+0x4c/0x80
[   35.181211]  kasan_set_free_info+0x1f/0x40
[   35.181942]  ____kasan_slab_free+0x103/0x140
[   35.182703]  kfree+0xe3/0x250
[   35.183239]  igbvf_probe+0x1173/0x1a10 [igbvf]
[   35.184040]  local_pci_probe+0x13c/0x1f0

Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions)
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igbvf/netdev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 519b72c418884..ab080118201df 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -2793,6 +2793,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return 0;
 
 err_hw_init:
+	netif_napi_del(&adapter->rx_ring->napi);
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
-- 
2.33.0

[PATCH 4.4 12/23] USB: gadget: bRequestType is a bitfield, not a enum

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f08adf5add9a071160c68bb2a61d697f39ab0758 ]

Szymon rightly pointed out that the previous check for the endpoint
direction in bRequestType was not looking at only the bit involved, but
rather the whole value.  Normally this is ok, but for some request
types, bits other than bit 8 could be set and the check for the endpoint
length could not stall correctly.

Fix that up by only checking the single bit.

Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests")
Cc: Felipe Balbi <balbi@kernel.org>
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20211214184621.385828-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/composite.c    | 6 +++---
 drivers/usb/gadget/legacy/dbgp.c  | 6 +++---
 drivers/usb/gadget/legacy/inode.c | 6 +++---
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 1f584d15a3ca4..580ba69f1e4a4 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1485,14 +1485,14 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u8				endp;
 
 	if (w_length > USB_COMP_EP0_BUFSIZ) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			goto done;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
 			w_length = USB_COMP_EP0_BUFSIZ;
+		} else {
+			goto done;
 		}
 	}
 
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
index f1c5a22704b28..e8818ad973e4b 100644
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -345,14 +345,14 @@ static int dbgp_setup(struct usb_gadget *gadget,
 	u16 len = 0;
 
 	if (length > DBGP_REQ_LEN) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			return err;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(DBGP_REQ_LEN);
 			length = DBGP_REQ_LEN;
+		} else {
+			return err;
 		}
 	}
 
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index af0b34763326d..f2b4fdd1f49d5 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1335,14 +1335,14 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 
 	if (w_length > RBUF_SIZE) {
-		if (ctrl->bRequestType == USB_DIR_OUT) {
-			return value;
-		} else {
+		if (ctrl->bRequestType & USB_DIR_IN) {
 			/* Cast away the const, we are going to overwrite on purpose. */
 			__le16 *temp = (__le16 *)&ctrl->wLength;
 
 			*temp = cpu_to_le16(RBUF_SIZE);
 			w_length = RBUF_SIZE;
+		} else {
+			return value;
 		}
 	}
 
-- 
2.34.1

[PATCH 4.4 13/23] PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream.

PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X
interrupt setup time. It's cleared on success, but the error handling path
only clears the PCI_MSIX_FLAGS_ENABLE bit.

That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is
zero. That can be observed via lspci:

        Capabilities: [b0] MSI-X: Enable- Count=67 Masked+

Clear the bit in the error path to restore the reset state.

Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early")
Reported-by: Stefan Roese <sr@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stefan Roese <sr@denx.de>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/msi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -840,7 +840,7 @@ out_free:
 	free_msi_irqs(dev);
 
 out_disable:
-	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+	pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE, 0);
 
 	return ret;
 }

[PATCH 4.4 14/23] USB: serial: option: add Telit FN990 compositions

[Greg Kroah-Hartman]

From: Daniele Palmas <dnlplm@gmail.com>

commit 2b503c8598d1b232e7fc7526bce9326d92331541 upstream.

Add the following Telit FN990 compositions:

0x1070: tty, adb, rmnet, tty, tty, tty, tty
0x1071: tty, adb, mbim, tty, tty, tty, tty
0x1072: rndis, tty, adb, tty, tty, tty, tty
0x1073: tty, adb, ecm, tty, tty, tty, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1195,6 +1195,14 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff),	/* Telit LN920 (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff),	/* Telit FN990 (rmnet) */
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff),	/* Telit FN990 (MBIM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff),	/* Telit FN990 (RNDIS) */
+	  .driver_info = NCTRL(2) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff),	/* Telit FN990 (ECM) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 4.4 15/23] timekeeping: Really make sure wall_to_monotonic isnt positive

[Greg Kroah-Hartman]

From: Yu Liao <liaoyu15@huawei.com>

commit 4e8c11b6b3f0b6a283e898344f154641eda94266 upstream.

Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic
isn't positive") it is still possible to make wall_to_monotonic positive
by running the following code:

    int main(void)
    {
        struct timespec time;

        clock_gettime(CLOCK_MONOTONIC, &time);
        time.tv_nsec = 0;
        clock_settime(CLOCK_REALTIME, &time);
        return 0;
    }

The reason is that the second parameter of timespec64_compare(), ts_delta,
may be unnormalized because the delta is calculated with an open coded
substraction which causes the comparison of tv_sec to yield the wrong
result:

  wall_to_monotonic = { .tv_sec = -10, .tv_nsec =  900000000 }
  ts_delta 	    = { .tv_sec =  -9, .tv_nsec = -900000000 }

That makes timespec64_compare() claim that wall_to_monotonic < ts_delta,
but actually the result should be wall_to_monotonic > ts_delta.

After normalization, the result of timespec64_compare() is correct because
the tv_sec comparison is not longer misleading:

  wall_to_monotonic = { .tv_sec = -10, .tv_nsec =  900000000 }
  ts_delta 	    = { .tv_sec = -10, .tv_nsec =  100000000 }

Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the
issue.

Fixes: e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211213135727.1656662-1-liaoyu15@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/time/timekeeping.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -966,8 +966,7 @@ int do_settimeofday64(const struct times
 	timekeeping_forward_now(tk);
 
 	xt = tk_xtime(tk);
-	ts_delta.tv_sec = ts->tv_sec - xt.tv_sec;
-	ts_delta.tv_nsec = ts->tv_nsec - xt.tv_nsec;
+	ts_delta = timespec64_sub(*ts, xt);
 
 	if (timespec64_compare(&tk->wall_to_monotonic, &ts_delta) > 0) {
 		ret = -EINVAL;

[PATCH 4.4 16/23] net: systemport: Add global locking for descriptor lifecycle

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 upstream.

The descriptor list is a shared resource across all of the transmit queues, and
the locking mechanism used today only protects concurrency across a given
transmit queue between the transmit and reclaiming. This creates an opportunity
for the SYSTEMPORT hardware to work on corrupted descriptors if we have
multiple producers at once which is the case when using multiple transmit
queues.

This was particularly noticeable when using multiple flows/transmit queues and
it showed up in interesting ways in that UDP packets would get a correct UDP
header checksum being calculated over an incorrect packet length. Similarly TCP
packets would get an equally correct checksum computed by the hardware over an
incorrect packet length.

The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges
when the driver produces a new descriptor anytime it writes to the
WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to
re-organize its descriptors and it is possible that concurrent TX queues
eventually break this internal allocation scheme to the point where the
length/status part of the descriptor gets used for an incorrect data buffer.

The fix is to impose a global serialization for all TX queues in the short
section where we are writing to the WRITE_PORT_{HI,LO} registers which solves
the corruption even with multiple concurrent TX queues being used.

Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c |    5 +++++
 drivers/net/ethernet/broadcom/bcmsysport.h |    1 +
 2 files changed, 6 insertions(+)

--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -90,9 +90,13 @@ static inline void tdma_port_write_desc_
 					     struct dma_desc *desc,
 					     unsigned int port)
 {
+	unsigned long desc_flags;
+
 	/* Ports are latched, so write upper address first */
+	spin_lock_irqsave(&priv->desc_lock, desc_flags);
 	tdma_writel(priv, desc->addr_status_len, TDMA_WRITE_PORT_HI(port));
 	tdma_writel(priv, desc->addr_lo, TDMA_WRITE_PORT_LO(port));
+	spin_unlock_irqrestore(&priv->desc_lock, desc_flags);
 }
 
 /* Ethtool operations */
@@ -1608,6 +1612,7 @@ static int bcm_sysport_open(struct net_d
 	}
 
 	/* Initialize both hardware and software ring */
+	spin_lock_init(&priv->desc_lock);
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		ret = bcm_sysport_init_tx_ring(priv, i);
 		if (ret) {
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -660,6 +660,7 @@ struct bcm_sysport_priv {
 	int			wol_irq;
 
 	/* Transmit rings */
+	spinlock_t		desc_lock;
 	struct bcm_sysport_tx_ring tx_rings[TDMA_NUM_RINGS];
 
 	/* Receive queue */

[PATCH 4.4 17/23] net: lan78xx: Avoid unnecessary self assignment

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 94e7c844990f0db92418586b107be135b4963b66 upstream.

Clang warns when a variable is assigned to itself.

drivers/net/usb/lan78xx.c:940:11: warning: explicitly assigning value of
variable of type 'u32' (aka 'unsigned int') to itself [-Wself-assign]
                        offset = offset;
                        ~~~~~~ ^ ~~~~~~
1 warning generated.

Reorder the if statement to acheive the same result and avoid a self
assignment warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/129
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/lan78xx.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -609,11 +609,9 @@ static int lan78xx_read_otp(struct lan78
 	ret = lan78xx_read_raw_otp(dev, 0, 1, &sig);
 
 	if (ret == 0) {
-		if (sig == OTP_INDICATOR_1)
-			offset = offset;
-		else if (sig == OTP_INDICATOR_2)
+		if (sig == OTP_INDICATOR_2)
 			offset += 0x100;
-		else
+		else if (sig != OTP_INDICATOR_1)
 			ret = -EINVAL;
 		if (!ret)
 			ret = lan78xx_read_raw_otp(dev, offset, length, data);

[PATCH 4.4 18/23] ARM: 8805/2: remove unneeded naked function usage

[Greg Kroah-Hartman]

From: Nicolas Pitre <nicolas.pitre@linaro.org>

commit b99afae1390140f5b0039e6b37a7380de31ae874 upstream.

The naked attribute is known to confuse some old gcc versions when
function arguments aren't explicitly listed as inline assembly operands
despite the gcc documentation. That resulted in commit 9a40ac86152c
("ARM: 6164/1: Add kto and kfrom to input operands list.").

Yet that commit has problems of its own by having assembly operand
constraints completely wrong. If the generated code has been OK since
then, it is due to luck rather than correctness. So this patch also
provides proper assembly operand constraints, and removes two instances
of redundant register usages in the implementation while at it.

Inspection of the generated code with this patch doesn't show any
obvious quality degradation either, so not relying on __naked at all
will make the code less fragile, and avoid some issues with clang.

The only remaining __naked instances (excluding the kprobes test cases)
are exynos_pm_power_up_setup(), tc2_pm_power_up_setup() and

cci_enable_port_for_self(. But in the first two cases, only the function
address is used by the compiler with no chance of inlining it by
mistake, and the third case is called from assembly code only. And the
fact that no stack is available when the corresponding code is executed
does warrant the __naked usage in those cases.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mm/copypage-fa.c       |   35 ++++++--------
 arch/arm/mm/copypage-feroceon.c |   98 +++++++++++++++++++---------------------
 arch/arm/mm/copypage-v4mc.c     |   19 +++----
 arch/arm/mm/copypage-v4wb.c     |   41 ++++++++--------
 arch/arm/mm/copypage-v4wt.c     |   37 +++++++--------
 arch/arm/mm/copypage-xsc3.c     |   71 ++++++++++++----------------
 arch/arm/mm/copypage-xscale.c   |   71 ++++++++++++++--------------
 7 files changed, 178 insertions(+), 194 deletions(-)

--- a/arch/arm/mm/copypage-fa.c
+++ b/arch/arm/mm/copypage-fa.c
@@ -17,26 +17,25 @@
 /*
  * Faraday optimised copy_user_page
  */
-static void __naked
-fa_copy_user_page(void *kto, const void *kfrom)
+static void fa_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
-1:	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	subs	r2, r2, #1			@ 1\n\
+	int tmp;
+
+	asm volatile ("\
+1:	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	subs	%2, %2, #1			@ 1\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c10, 4		@ 1   drain WB\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "I" (PAGE_SIZE / 32));
+	mcr	p15, 0, %2, c7, c10, 4		@ 1   drain WB"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 32)
+	: "r3", "r4", "ip", "lr");
 }
 
 void fa_copy_user_highpage(struct page *to, struct page *from,
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -13,58 +13,56 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 
-static void __naked
-feroceon_copy_user_page(void *kto, const void *kfrom)
+static void feroceon_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %2				\n\
-1:	mov	lr, r1				\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	pld	[lr, #32]			\n\
-	pld	[lr, #64]			\n\
-	pld	[lr, #96]			\n\
-	pld	[lr, #128]			\n\
-	pld	[lr, #160]			\n\
-	pld	[lr, #192]			\n\
-	pld	[lr, #224]			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	subs	ip, ip, #(32 * 8)		\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
+	int tmp;
+
+	asm volatile ("\
+1:	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	pld	[%1, #0]			\n\
+	pld	[%1, #32]			\n\
+	pld	[%1, #64]			\n\
+	pld	[%1, #96]			\n\
+	pld	[%1, #128]			\n\
+	pld	[%1, #160]			\n\
+	pld	[%1, #192]			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	ldmia	%1!, {r2 - r7, ip, lr}		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	stmia	%0, {r2 - r7, ip, lr}		\n\
+	subs	%2, %2, #(32 * 8)		\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
 	bne	1b				\n\
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
-	ldmfd	sp!, {r4-r9, pc}"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
+	mcr	p15, 0, %2, c7, c10, 4		@ drain WB"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE)
+	: "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr");
 }
 
 void feroceon_copy_user_highpage(struct page *to, struct page *from,
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -40,12 +40,11 @@ static DEFINE_RAW_SPINLOCK(minicache_loc
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __naked
-mc_copy_user_page(void *from, void *to)
+static void mc_copy_user_page(void *from, void *to)
 {
-	asm volatile(
-	"stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r4, %2				@ 1\n\
+	int tmp;
+
+	asm volatile ("\
 	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
@@ -55,13 +54,13 @@ mc_copy_user_page(void *from, void *to)
 	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
 	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r4, r4, #1			@ 1\n\
+	subs	%2, %2, #1			@ 1\n\
 	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
 	ldmneia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	bne	1b				@ 1\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
+	bne	1b				@ "
+	: "+&r" (from), "+&r" (to), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r2", "r3", "ip", "lr");
 }
 
 void v4_mc_copy_user_highpage(struct page *to, struct page *from,
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -22,29 +22,28 @@
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __naked
-v4wb_copy_user_page(void *kto, const void *kfrom)
+static void v4wb_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %2				@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	subs	r2, r2, #1			@ 1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	int tmp;
+
+	asm volatile ("\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+1:	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4+1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	subs	%2, %2, #1			@ 1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmneia	%1!, {r3, r4, ip, lr}		@ 4\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
-	ldmfd	 sp!, {r4, pc}			@ 3"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
+	mcr	p15, 0, %1, c7, c10, 4		@ 1   drain WB"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r3", "r4", "ip", "lr");
 }
 
 void v4wb_copy_user_highpage(struct page *to, struct page *from,
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -20,27 +20,26 @@
  * dirty data in the cache.  However, we do have to ensure that
  * subsequent reads are up to date.
  */
-static void __naked
-v4wt_copy_user_page(void *kto, const void *kfrom)
+static void v4wt_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %2				@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	subs	r2, r2, #1			@ 1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	int tmp;
+
+	asm volatile ("\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+1:	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4+1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	%1!, {r3, r4, ip, lr}		@ 4\n\
+	subs	%2, %2, #1			@ 1\n\
+	stmia	%0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmneia	%1!, {r3, r4, ip, lr}		@ 4\n\
 	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
+	mcr	p15, 0, %2, c7, c7, 0		@ flush ID cache"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64)
+	: "r3", "r4", "ip", "lr");
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -21,53 +21,46 @@
 
 /*
  * XSC3 optimised copy_user_highpage
- *  r0 = destination
- *  r1 = source
  *
  * The source page may have some clean entries in the cache already, but we
  * can safely ignore them - break_cow() will flush them out of the cache
  * if we eventually end up using our copied page.
  *
  */
-static void __naked
-xsc3_mc_copy_user_page(void *kto, const void *kfrom)
+static void xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
-	asm("\
-	stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %2				\n\
-						\n\
-	pld	[r1, #0]			\n\
-	pld	[r1, #32]			\n\
-1:	pld	[r1, #64]			\n\
-	pld	[r1, #96]			\n\
+	int tmp;
+
+	asm volatile ("\
+	pld	[%1, #0]			\n\
+	pld	[%1, #32]			\n\
+1:	pld	[%1, #64]			\n\
+	pld	[%1, #96]			\n\
 						\n\
-2:	ldrd	r2, [r1], #8			\n\
-	mov	ip, r0				\n\
-	ldrd	r4, [r1], #8			\n\
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate\n\
-	strd	r2, [r0], #8			\n\
-	ldrd	r2, [r1], #8			\n\
-	strd	r4, [r0], #8			\n\
-	ldrd	r4, [r1], #8			\n\
-	strd	r2, [r0], #8			\n\
-	strd	r4, [r0], #8			\n\
-	ldrd	r2, [r1], #8			\n\
-	mov	ip, r0				\n\
-	ldrd	r4, [r1], #8			\n\
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate\n\
-	strd	r2, [r0], #8			\n\
-	ldrd	r2, [r1], #8			\n\
-	subs	lr, lr, #1			\n\
-	strd	r4, [r0], #8			\n\
-	ldrd	r4, [r1], #8			\n\
-	strd	r2, [r0], #8			\n\
-	strd	r4, [r0], #8			\n\
+2:	ldrd	r2, [%1], #8			\n\
+	ldrd	r4, [%1], #8			\n\
+	mcr	p15, 0, %0, c7, c6, 1		@ invalidate\n\
+	strd	r2, [%0], #8			\n\
+	ldrd	r2, [%1], #8			\n\
+	strd	r4, [%0], #8			\n\
+	ldrd	r4, [%1], #8			\n\
+	strd	r2, [%0], #8			\n\
+	strd	r4, [%0], #8			\n\
+	ldrd	r2, [%1], #8			\n\
+	ldrd	r4, [%1], #8			\n\
+	mcr	p15, 0, %0, c7, c6, 1		@ invalidate\n\
+	strd	r2, [%0], #8			\n\
+	ldrd	r2, [%1], #8			\n\
+	subs	%2, %2, #1			\n\
+	strd	r4, [%0], #8			\n\
+	ldrd	r4, [%1], #8			\n\
+	strd	r2, [%0], #8			\n\
+	strd	r4, [%0], #8			\n\
 	bgt	1b				\n\
-	beq	2b				\n\
-						\n\
-	ldmfd	sp!, {r4, r5, pc}"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
+	beq	2b				"
+	: "+&r" (kto), "+&r" (kfrom), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64 - 1)
+	: "r2", "r3", "r4", "r5");
 }
 
 void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
@@ -85,8 +78,6 @@ void xsc3_mc_copy_user_highpage(struct p
 
 /*
  * XScale optimised clear_user_page
- *  r0 = destination
- *  r1 = virtual user address of ultimate destination page
  */
 void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
 {
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -36,52 +36,51 @@ static DEFINE_RAW_SPINLOCK(minicache_loc
  * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
  * and merged as appropriate.
  */
-static void __naked
-mc_copy_user_page(void *from, void *to)
+static void mc_copy_user_page(void *from, void *to)
 {
+	int tmp;
+
 	/*
 	 * Strangely enough, best performance is achieved
 	 * when prefetching destination as well.  (NP)
 	 */
-	asm volatile(
-	"stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %2				\n\
-	pld	[r0, #0]			\n\
-	pld	[r0, #32]			\n\
-	pld	[r1, #0]			\n\
-	pld	[r1, #32]			\n\
-1:	pld	[r0, #64]			\n\
-	pld	[r0, #96]			\n\
-	pld	[r1, #64]			\n\
-	pld	[r1, #96]			\n\
-2:	ldrd	r2, [r0], #8			\n\
-	ldrd	r4, [r0], #8			\n\
-	mov	ip, r1				\n\
-	strd	r2, [r1], #8			\n\
-	ldrd	r2, [r0], #8			\n\
-	strd	r4, [r1], #8			\n\
-	ldrd	r4, [r0], #8			\n\
-	strd	r2, [r1], #8			\n\
-	strd	r4, [r1], #8			\n\
+	asm volatile ("\
+	pld	[%0, #0]			\n\
+	pld	[%0, #32]			\n\
+	pld	[%1, #0]			\n\
+	pld	[%1, #32]			\n\
+1:	pld	[%0, #64]			\n\
+	pld	[%0, #96]			\n\
+	pld	[%1, #64]			\n\
+	pld	[%1, #96]			\n\
+2:	ldrd	r2, [%0], #8			\n\
+	ldrd	r4, [%0], #8			\n\
+	mov	ip, %1				\n\
+	strd	r2, [%1], #8			\n\
+	ldrd	r2, [%0], #8			\n\
+	strd	r4, [%1], #8			\n\
+	ldrd	r4, [%0], #8			\n\
+	strd	r2, [%1], #8			\n\
+	strd	r4, [%1], #8			\n\
 	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
-	ldrd	r2, [r0], #8			\n\
+	ldrd	r2, [%0], #8			\n\
 	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
-	ldrd	r4, [r0], #8			\n\
-	mov	ip, r1				\n\
-	strd	r2, [r1], #8			\n\
-	ldrd	r2, [r0], #8			\n\
-	strd	r4, [r1], #8			\n\
-	ldrd	r4, [r0], #8			\n\
-	strd	r2, [r1], #8			\n\
-	strd	r4, [r1], #8			\n\
+	ldrd	r4, [%0], #8			\n\
+	mov	ip, %1				\n\
+	strd	r2, [%1], #8			\n\
+	ldrd	r2, [%0], #8			\n\
+	strd	r4, [%1], #8			\n\
+	ldrd	r4, [%0], #8			\n\
+	strd	r2, [%1], #8			\n\
+	strd	r4, [%1], #8			\n\
 	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
-	subs	lr, lr, #1			\n\
+	subs	%2, %2, #1			\n\
 	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
 	bgt	1b				\n\
-	beq	2b				\n\
-	ldmfd	sp!, {r4, r5, pc}		"
-	:
-	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1));
+	beq	2b				"
+	: "+&r" (from), "+&r" (to), "=&r" (tmp)
+	: "2" (PAGE_SIZE / 64 - 1)
+	: "r2", "r3", "r4", "r5", "ip");
 }
 
 void xscale_mc_copy_user_highpage(struct page *to, struct page *from,

[PATCH 4.4 19/23] Input: touchscreen - avoid bitwise vs logical OR warning

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream.

A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:

drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
        data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.

To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/touchscreen/of_touchscreen.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -75,8 +75,8 @@ void touchscreen_parse_properties(struct
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-x",
 						input_abs_get_max(input,
 								  axis) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
 						input_abs_get_fuzz(input, axis),
 						&fuzz);
 	if (data_present)
@@ -86,8 +86,8 @@ void touchscreen_parse_properties(struct
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-y",
 						input_abs_get_max(input,
 								  axis) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
 						input_abs_get_fuzz(input, axis),
 						&fuzz);
 	if (data_present)
@@ -97,11 +97,11 @@ void touchscreen_parse_properties(struct
 	data_present = touchscreen_get_prop_u32(dev,
 						"touchscreen-max-pressure",
 						input_abs_get_max(input, axis),
-						&maximum) |
-		       touchscreen_get_prop_u32(dev,
-						"touchscreen-fuzz-pressure",
-						input_abs_get_fuzz(input, axis),
-						&fuzz);
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev,
+						 "touchscreen-fuzz-pressure",
+						 input_abs_get_fuzz(input, axis),
+						 &fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, maximum, fuzz);
 }

[PATCH 4.4 20/23] xen/blkfront: harden blkfront against event channel storms

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream.

The Xen blkfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/xen-blkfront.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1319,11 +1319,13 @@ static irqreturn_t blkif_interrupt(int i
 	unsigned long flags;
 	struct blkfront_info *info = (struct blkfront_info *)dev_id;
 	int error;
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
 
 	spin_lock_irqsave(&info->io_lock, flags);
 
 	if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) {
 		spin_unlock_irqrestore(&info->io_lock, flags);
+		xen_irq_lateeoi(irq, XEN_EOI_FLAG_SPURIOUS);
 		return IRQ_HANDLED;
 	}
 
@@ -1340,6 +1342,8 @@ static irqreturn_t blkif_interrupt(int i
 		unsigned long id;
 		unsigned int op;
 
+		eoiflag = 0;
+
 		RING_COPY_RESPONSE(&info->ring, i, &bret);
 		id   = bret.id;
 
@@ -1444,6 +1448,8 @@ static irqreturn_t blkif_interrupt(int i
 
 	spin_unlock_irqrestore(&info->io_lock, flags);
 
+	xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 
  err:
@@ -1451,6 +1457,8 @@ static irqreturn_t blkif_interrupt(int i
 
 	spin_unlock_irqrestore(&info->io_lock, flags);
 
+	/* No EOI in order to avoid further interrupts. */
+
 	pr_alert("%s disabled for further use\n", info->gd->disk_name);
 	return IRQ_HANDLED;
 }
@@ -1489,8 +1497,8 @@ static int setup_blkring(struct xenbus_d
 	if (err)
 		goto fail;
 
-	err = bind_evtchn_to_irqhandler(info->evtchn, blkif_interrupt, 0,
-					"blkif", info);
+	err = bind_evtchn_to_irqhandler_lateeoi(info->evtchn, blkif_interrupt,
+						0, "blkif", info);
 	if (err <= 0) {
 		xenbus_dev_fatal(dev, err,
 				 "bind_evtchn_to_irqhandler failed");

[PATCH 4.4 21/23] xen/netfront: harden netfront against event channel storms

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream.

The Xen netfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.

For being able to detect the case of no rx responses being added while
the carrier is down a new lock is needed in order to update and test
rsp_cons and the number of seen unconsumed responses atomically.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netfront.c |  125 +++++++++++++++++++++++++++++++++------------
 1 file changed, 94 insertions(+), 31 deletions(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -141,6 +141,9 @@ struct netfront_queue {
 	struct sk_buff *rx_skbs[NET_RX_RING_SIZE];
 	grant_ref_t gref_rx_head;
 	grant_ref_t grant_rx_ref[NET_RX_RING_SIZE];
+
+	unsigned int rx_rsp_unconsumed;
+	spinlock_t rx_cons_lock;
 };
 
 struct netfront_info {
@@ -365,11 +368,12 @@ static int xennet_open(struct net_device
 	return 0;
 }
 
-static void xennet_tx_buf_gc(struct netfront_queue *queue)
+static bool xennet_tx_buf_gc(struct netfront_queue *queue)
 {
 	RING_IDX cons, prod;
 	unsigned short id;
 	struct sk_buff *skb;
+	bool work_done = false;
 	const struct device *dev = &queue->info->netdev->dev;
 
 	BUG_ON(!netif_carrier_ok(queue->info->netdev));
@@ -386,6 +390,8 @@ static void xennet_tx_buf_gc(struct netf
 		for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
 			struct xen_netif_tx_response txrsp;
 
+			work_done = true;
+
 			RING_COPY_RESPONSE(&queue->tx, cons, &txrsp);
 			if (txrsp.status == XEN_NETIF_RSP_NULL)
 				continue;
@@ -439,11 +445,13 @@ static void xennet_tx_buf_gc(struct netf
 
 	xennet_maybe_wake_tx(queue);
 
-	return;
+	return work_done;
 
  err:
 	queue->info->broken = true;
 	dev_alert(dev, "Disabled for further use\n");
+
+	return work_done;
 }
 
 struct xennet_gnttab_make_txreq {
@@ -748,6 +756,16 @@ static int xennet_close(struct net_devic
 	return 0;
 }
 
+static void xennet_set_rx_rsp_cons(struct netfront_queue *queue, RING_IDX val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->rx_cons_lock, flags);
+	queue->rx.rsp_cons = val;
+	queue->rx_rsp_unconsumed = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+	spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+}
+
 static void xennet_move_rx_slot(struct netfront_queue *queue, struct sk_buff *skb,
 				grant_ref_t ref)
 {
@@ -799,7 +817,7 @@ static int xennet_get_extras(struct netf
 		xennet_move_rx_slot(queue, skb, ref);
 	} while (extra.flags & XEN_NETIF_EXTRA_FLAG_MORE);
 
-	queue->rx.rsp_cons = cons;
+	xennet_set_rx_rsp_cons(queue, cons);
 	return err;
 }
 
@@ -879,7 +897,7 @@ next:
 	}
 
 	if (unlikely(err))
-		queue->rx.rsp_cons = cons + slots;
+		xennet_set_rx_rsp_cons(queue, cons + slots);
 
 	return err;
 }
@@ -933,7 +951,8 @@ static int xennet_fill_frags(struct netf
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
-			queue->rx.rsp_cons = ++cons + skb_queue_len(list);
+			xennet_set_rx_rsp_cons(queue,
+					       ++cons + skb_queue_len(list));
 			kfree_skb(nskb);
 			return -ENOENT;
 		}
@@ -946,7 +965,7 @@ static int xennet_fill_frags(struct netf
 		kfree_skb(nskb);
 	}
 
-	queue->rx.rsp_cons = cons;
+	xennet_set_rx_rsp_cons(queue, cons);
 
 	return 0;
 }
@@ -1067,7 +1086,9 @@ err:
 
 			if (unlikely(xennet_set_skb_gso(skb, gso))) {
 				__skb_queue_head(&tmpq, skb);
-				queue->rx.rsp_cons += skb_queue_len(&tmpq);
+				xennet_set_rx_rsp_cons(queue,
+						       queue->rx.rsp_cons +
+						       skb_queue_len(&tmpq));
 				goto err;
 			}
 		}
@@ -1091,7 +1112,8 @@ err:
 
 		__skb_queue_tail(&rxq, skb);
 
-		i = ++queue->rx.rsp_cons;
+		i = queue->rx.rsp_cons + 1;
+		xennet_set_rx_rsp_cons(queue, i);
 		work_done++;
 	}
 
@@ -1275,40 +1297,79 @@ static int xennet_set_features(struct ne
 	return 0;
 }
 
-static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_tx(struct netfront_queue *queue, unsigned int *eoi)
 {
-	struct netfront_queue *queue = dev_id;
 	unsigned long flags;
 
-	if (queue->info->broken)
-		return IRQ_HANDLED;
+	if (unlikely(queue->info->broken))
+		return false;
 
 	spin_lock_irqsave(&queue->tx_lock, flags);
-	xennet_tx_buf_gc(queue);
+	if (xennet_tx_buf_gc(queue))
+		*eoi = 0;
 	spin_unlock_irqrestore(&queue->tx_lock, flags);
 
+	return true;
+}
+
+static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+{
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (likely(xennet_handle_tx(dev_id, &eoiflag)))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_rx(struct netfront_queue *queue, unsigned int *eoi)
 {
-	struct netfront_queue *queue = dev_id;
-	struct net_device *dev = queue->info->netdev;
+	unsigned int work_queued;
+	unsigned long flags;
+
+	if (unlikely(queue->info->broken))
+		return false;
 
-	if (queue->info->broken)
-		return IRQ_HANDLED;
+	spin_lock_irqsave(&queue->rx_cons_lock, flags);
+	work_queued = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+	if (work_queued > queue->rx_rsp_unconsumed) {
+		queue->rx_rsp_unconsumed = work_queued;
+		*eoi = 0;
+	} else if (unlikely(work_queued < queue->rx_rsp_unconsumed)) {
+		const struct device *dev = &queue->info->netdev->dev;
+
+		spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+		dev_alert(dev, "RX producer index going backwards\n");
+		dev_alert(dev, "Disabled for further use\n");
+		queue->info->broken = true;
+		return false;
+	}
+	spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
 
-	if (likely(netif_carrier_ok(dev) &&
-		   RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
+	if (likely(netif_carrier_ok(queue->info->netdev) && work_queued))
 		napi_schedule(&queue->napi);
 
+	return true;
+}
+
+static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+{
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (likely(xennet_handle_rx(dev_id, &eoiflag)))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t xennet_interrupt(int irq, void *dev_id)
 {
-	xennet_tx_interrupt(irq, dev_id);
-	xennet_rx_interrupt(irq, dev_id);
+	unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+	if (xennet_handle_tx(dev_id, &eoiflag) &&
+	    xennet_handle_rx(dev_id, &eoiflag))
+		xen_irq_lateeoi(irq, eoiflag);
+
 	return IRQ_HANDLED;
 }
 
@@ -1540,9 +1601,10 @@ static int setup_netfront_single(struct
 	if (err < 0)
 		goto fail;
 
-	err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
-					xennet_interrupt,
-					0, queue->info->netdev->name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+						xennet_interrupt, 0,
+						queue->info->netdev->name,
+						queue);
 	if (err < 0)
 		goto bind_fail;
 	queue->rx_evtchn = queue->tx_evtchn;
@@ -1570,18 +1632,18 @@ static int setup_netfront_split(struct n
 
 	snprintf(queue->tx_irq_name, sizeof(queue->tx_irq_name),
 		 "%s-tx", queue->name);
-	err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
-					xennet_tx_interrupt,
-					0, queue->tx_irq_name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+						xennet_tx_interrupt, 0,
+						queue->tx_irq_name, queue);
 	if (err < 0)
 		goto bind_tx_fail;
 	queue->tx_irq = err;
 
 	snprintf(queue->rx_irq_name, sizeof(queue->rx_irq_name),
 		 "%s-rx", queue->name);
-	err = bind_evtchn_to_irqhandler(queue->rx_evtchn,
-					xennet_rx_interrupt,
-					0, queue->rx_irq_name, queue);
+	err = bind_evtchn_to_irqhandler_lateeoi(queue->rx_evtchn,
+						xennet_rx_interrupt, 0,
+						queue->rx_irq_name, queue);
 	if (err < 0)
 		goto bind_rx_fail;
 	queue->rx_irq = err;
@@ -1683,6 +1745,7 @@ static int xennet_init_queue(struct netf
 
 	spin_lock_init(&queue->tx_lock);
 	spin_lock_init(&queue->rx_lock);
+	spin_lock_init(&queue->rx_cons_lock);
 
 	setup_timer(&queue->rx_refill_timer, rx_refill_timeout,
 		    (unsigned long)queue);

[PATCH 4.4 22/23] xen/console: harden hvc_xen against event channel storms

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream.

The Xen console driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using a lateeoi event
channel.

For the normal domU initial console this requires the introduction of
bind_evtchn_to_irq_lateeoi() as there is no xenbus device available
at the time the event channel is bound to the irq.

As the decision whether an interrupt was spurious or not requires to
test for bytes having been read from the backend, move sending the
event into the if statement, as sending an event without having found
any bytes to be read is making no sense at all.

This is part of XSA-391

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/hvc/hvc_xen.c |   30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -49,6 +49,8 @@ struct xencons_info {
 	struct xenbus_device *xbdev;
 	struct xencons_interface *intf;
 	unsigned int evtchn;
+	XENCONS_RING_IDX out_cons;
+	unsigned int out_cons_same;
 	struct hvc_struct *hvc;
 	int irq;
 	int vtermno;
@@ -150,6 +152,8 @@ static int domU_read_console(uint32_t vt
 	XENCONS_RING_IDX cons, prod;
 	int recv = 0;
 	struct xencons_info *xencons = vtermno_to_xencons(vtermno);
+	unsigned int eoiflag = 0;
+
 	if (xencons == NULL)
 		return -EINVAL;
 	intf = xencons->intf;
@@ -169,7 +173,27 @@ static int domU_read_console(uint32_t vt
 	mb();			/* read ring before consuming */
 	intf->in_cons = cons;
 
-	notify_daemon(xencons);
+	/*
+	 * When to mark interrupt having been spurious:
+	 * - there was no new data to be read, and
+	 * - the backend did not consume some output bytes, and
+	 * - the previous round with no read data didn't see consumed bytes
+	 *   (we might have a race with an interrupt being in flight while
+	 *   updating xencons->out_cons, so account for that by allowing one
+	 *   round without any visible reason)
+	 */
+	if (intf->out_cons != xencons->out_cons) {
+		xencons->out_cons = intf->out_cons;
+		xencons->out_cons_same = 0;
+	}
+	if (recv) {
+		notify_daemon(xencons);
+	} else if (xencons->out_cons_same++ > 1) {
+		eoiflag = XEN_EOI_FLAG_SPURIOUS;
+	}
+
+	xen_irq_lateeoi(xencons->irq, eoiflag);
+
 	return recv;
 }
 
@@ -391,7 +415,7 @@ static int xencons_connect_backend(struc
 	if (ret)
 		return ret;
 	info->evtchn = evtchn;
-	irq = bind_evtchn_to_irq(evtchn);
+	irq = bind_interdomain_evtchn_to_irq_lateeoi(dev->otherend_id, evtchn);
 	if (irq < 0)
 		return irq;
 	info->irq = irq;
@@ -555,7 +579,7 @@ static int __init xen_hvc_init(void)
 			return r;
 
 		info = vtermno_to_xencons(HVC_COOKIE);
-		info->irq = bind_evtchn_to_irq(info->evtchn);
+		info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn);
 	}
 	if (info->irq < 0)
 		info->irq = 0; /* NO_IRQ */

[PATCH 4.4 23/23] xen/netback: dont queue unlimited number of packages

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream.

In case a guest isn't consuming incoming network traffic as fast as it
is coming in, xen-netback is buffering network packages in unlimited
numbers today. This can result in host OOM situations.

Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal
queue and carrier flapping") meant to introduce a mechanism to limit
the amount of buffered data by stopping the Tx queue when reaching the
data limit, but this doesn't work for cases like UDP.

When hitting the limit don't queue further SKBs, but drop them instead.
In order to be able to tell Rx packages have been dropped increment the
rx_dropped statistics counter in this case.

It should be noted that the old solution to continue queueing SKBs had
the additional problem of an overflow of the 32-bit rx_queue_len value
would result in intermittent Tx queue enabling.

This is part of XSA-392

Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/netback.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -189,11 +189,15 @@ void xenvif_rx_queue_tail(struct xenvif_
 
 	spin_lock_irqsave(&queue->rx_queue.lock, flags);
 
-	__skb_queue_tail(&queue->rx_queue, skb);
-
-	queue->rx_queue_len += skb->len;
-	if (queue->rx_queue_len > queue->rx_queue_max)
+	if (queue->rx_queue_len >= queue->rx_queue_max) {
 		netif_tx_stop_queue(netdev_get_tx_queue(queue->vif->dev, queue->id));
+		kfree_skb(skb);
+		queue->vif->dev->stats.rx_dropped++;
+	} else {
+		__skb_queue_tail(&queue->rx_queue, skb);
+
+		queue->rx_queue_len += skb->len;
+	}
 
 	spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
 }
@@ -243,6 +247,7 @@ static void xenvif_rx_queue_drop_expired
 			break;
 		xenvif_rx_dequeue(queue);
 		kfree_skb(skb);
+		queue->vif->dev->stats.rx_dropped++;
 	}
 }
 

Re: [PATCH 4.4 00/23] 4.4.296-rc1 review

[Jon Hunter]

On Mon, 20 Dec 2021 15:34:01 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.296 release.
> There are 23 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.296-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.4:
    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    30 tests:	30 pass, 0 fail

Linux version:	4.4.296-rc1-gf46f7fed4810
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.4 00/23] 4.4.296-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 659 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.4.296 release.
> There are 23 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.4 00/23] 4.4.296-rc1 review

[Shuah Khan]

On 12/20/21 7:34 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.296 release.
> There are 23 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.296-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.4 00/23] 4.4.296-rc1 review

[Naresh Kamboju]

On Mon, 20 Dec 2021 at 20:07, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.4.296 release.
> There are 23 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.296-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.4.296-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.4.y
* git commit: f46f7fed481068d1389efbf0122c45cb9f36480d
* git describe: v4.4.295-24-gf46f7fed4810
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.295-24-gf46f7fed4810

## No Test Regressions (compared to v4.4.295-6-ge478503b16a3)

## No Test Fixes (compared to v4.4.295-6-ge478503b16a3)

## Test result summary
total: 46356, pass: 37461, fail: 177, skip: 7721, xfail: 997

## Build Summary
* arm: 129 total, 129 passed, 0 failed
* arm64: 31 total, 31 passed, 0 failed
* i386: 18 total, 18 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 30 total, 24 passed, 6 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.4 00/23] 4.4.296-rc1 review

[Guenter Roeck]

On Mon, Dec 20, 2021 at 03:34:01PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.296 release.
> There are 23 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 160 pass: 160 fail: 0
Qemu test results:
	total: 339 pass: 339 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter