* [PATCH v4 00/24] linux-user: Clean up siginfo_t handling
@ 2021-12-20 21:05 Richard Henderson
2021-12-20 21:05 ` [PATCH v4 01/24] linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap Richard Henderson
` (23 more replies)
0 siblings, 24 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: laurent
Changes from v3:
* Rebase on master,
* Remove TARGET_NSIGFPE as unused.
Patches lacking review:
07-linux-user-Remove-TARGET_NSIGFPE.patch
08-linux-user-hppa-Set-FPE_CONDTRAP-for-COND.patch
r~
Richard Henderson (24):
linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap
linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND
linux-user/alpha: Use force_sig_fault
linux-user/cris: Use force_sig_fault
linux-user/hppa: Use force_sig_fault
linux-user/hppa: Use the proper si_code for PRIV_OPR, PRIV_REG,
OVERFLOW
linux-user: Remove TARGET_NSIGFPE
linux-user/hppa: Set FPE_CONDTRAP for COND
linux-user/i386: Split out maybe_handle_vm86_trap
linux-user/i386: Use force_sig, force_sig_fault
linux-user/m68k: Use force_sig_fault
linux-user/microblaze: Use force_sig_fault
linux-user/microblaze: Fix SIGFPE si_codes
linux-user/mips: Improve do_break
linux-user/mips: Use force_sig_fault
target/mips: Extract break code into env->error_code
target/mips: Extract trap code into env->error_code
linux-user/openrisc: Use force_sig_fault
linux-user/ppc: Use force_sig_fault
linux-user/riscv: Use force_sig_fault
linux-user/s390x: Use force_sig_fault
linux-user/sh4: Use force_sig_fault
linux-user/sparc: Use force_sig_fault
linux-user/xtensa: Use force_sig_fault
linux-user/syscall_defs.h | 3 +-
target/mips/tcg/translate.h | 1 +
linux-user/alpha/cpu_loop.c | 61 +++-----
linux-user/cris/cpu_loop.c | 12 +-
linux-user/hppa/cpu_loop.c | 26 ++--
linux-user/i386/cpu_loop.c | 78 +++++-----
linux-user/m68k/cpu_loop.c | 24 +---
linux-user/microblaze/cpu_loop.c | 71 +++++----
linux-user/mips/cpu_loop.c | 166 +++++-----------------
linux-user/openrisc/cpu_loop.c | 18 +--
linux-user/ppc/cpu_loop.c | 136 ++++--------------
linux-user/riscv/cpu_loop.c | 31 +---
linux-user/s390x/cpu_loop.c | 7 +-
linux-user/sh4/cpu_loop.c | 6 +-
linux-user/sparc/cpu_loop.c | 14 +-
linux-user/xtensa/cpu_loop.c | 26 ++--
target/mips/tcg/translate.c | 36 ++++-
target/mips/tcg/micromips_translate.c.inc | 10 +-
target/mips/tcg/mips16e_translate.c.inc | 2 +-
target/mips/tcg/nanomips_translate.c.inc | 4 +-
20 files changed, 230 insertions(+), 502 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v4 01/24] linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 02/24] linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND Richard Henderson
` (22 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
These si_codes were changed in 535906c684fca, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/syscall_defs.h | 1 +
linux-user/alpha/cpu_loop.c | 4 ++--
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
index 0b13975937..bc18a4f248 100644
--- a/linux-user/syscall_defs.h
+++ b/linux-user/syscall_defs.h
@@ -715,6 +715,7 @@ typedef struct target_siginfo {
#define TARGET_TRAP_TRACE (2) /* process trace trap */
#define TARGET_TRAP_BRANCH (3) /* process taken branch trap */
#define TARGET_TRAP_HWBKPT (4) /* hardware breakpoint/watchpoint */
+#define TARGET_TRAP_UNK (5) /* undiagnosed trap */
struct target_rlimit {
abi_ulong rlim_cur;
diff --git a/linux-user/alpha/cpu_loop.c b/linux-user/alpha/cpu_loop.c
index 4029849d5c..b039369198 100644
--- a/linux-user/alpha/cpu_loop.c
+++ b/linux-user/alpha/cpu_loop.c
@@ -86,7 +86,7 @@ void cpu_loop(CPUAlphaState *env)
/* BUGCHK */
info.si_signo = TARGET_SIGTRAP;
info.si_errno = 0;
- info.si_code = 0;
+ info.si_code = TARGET_TRAP_UNK;
info._sifields._sigfault._addr = env->pc;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
@@ -155,7 +155,7 @@ void cpu_loop(CPUAlphaState *env)
break;
default:
info.si_signo = TARGET_SIGTRAP;
- info.si_code = 0;
+ info.si_code = TARGET_TRAP_UNK;
break;
}
info.si_errno = 0;
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 02/24] linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
2021-12-20 21:05 ` [PATCH v4 01/24] linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 03/24] linux-user/alpha: Use force_sig_fault Richard Henderson
` (21 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
This si_code was changed in 4cc13e4f6d441, for linux 4.17.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/alpha/cpu_loop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/linux-user/alpha/cpu_loop.c b/linux-user/alpha/cpu_loop.c
index b039369198..92de2a4424 100644
--- a/linux-user/alpha/cpu_loop.c
+++ b/linux-user/alpha/cpu_loop.c
@@ -151,7 +151,7 @@ void cpu_loop(CPUAlphaState *env)
info.si_code = TARGET_FPE_FLTRES;
break;
case TARGET_GEN_ROPRAND:
- info.si_code = 0;
+ info.si_code = TARGET_FPE_FLTUNK;
break;
default:
info.si_signo = TARGET_SIGTRAP;
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 03/24] linux-user/alpha: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
2021-12-20 21:05 ` [PATCH v4 01/24] linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap Richard Henderson
2021-12-20 21:05 ` [PATCH v4 02/24] linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 04/24] linux-user/cris: " Richard Henderson
` (20 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/alpha/cpu_loop.c | 61 ++++++++++++-------------------------
1 file changed, 19 insertions(+), 42 deletions(-)
diff --git a/linux-user/alpha/cpu_loop.c b/linux-user/alpha/cpu_loop.c
index 92de2a4424..0e4c2db462 100644
--- a/linux-user/alpha/cpu_loop.c
+++ b/linux-user/alpha/cpu_loop.c
@@ -27,8 +27,7 @@
void cpu_loop(CPUAlphaState *env)
{
CPUState *cs = env_cpu(env);
- int trapnr;
- target_siginfo_t info;
+ int trapnr, si_code;
abi_long sysret;
while (1) {
@@ -56,18 +55,10 @@ void cpu_loop(CPUAlphaState *env)
break;
case EXCP_OPCDEC:
do_sigill:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPC;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPC, env->pc);
break;
case EXCP_ARITH:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_FLTINV;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_FLTINV, env->pc);
break;
case EXCP_FEN:
/* No-op. Linux simply re-enables the FPU. */
@@ -76,20 +67,10 @@ void cpu_loop(CPUAlphaState *env)
switch (env->error_code) {
case 0x80:
/* BPT */
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
+ goto do_sigtrap_brkpt;
case 0x81:
/* BUGCHK */
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_UNK;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
+ goto do_sigtrap_unk;
case 0x83:
/* CALLSYS */
trapnr = env->ir[IR_V0];
@@ -130,47 +111,43 @@ void cpu_loop(CPUAlphaState *env)
abort();
case 0xAA:
/* GENTRAP */
- info.si_signo = TARGET_SIGFPE;
switch (env->ir[IR_A0]) {
case TARGET_GEN_INTOVF:
- info.si_code = TARGET_FPE_INTOVF;
+ si_code = TARGET_FPE_INTOVF;
break;
case TARGET_GEN_INTDIV:
- info.si_code = TARGET_FPE_INTDIV;
+ si_code = TARGET_FPE_INTDIV;
break;
case TARGET_GEN_FLTOVF:
- info.si_code = TARGET_FPE_FLTOVF;
+ si_code = TARGET_FPE_FLTOVF;
break;
case TARGET_GEN_FLTUND:
- info.si_code = TARGET_FPE_FLTUND;
+ si_code = TARGET_FPE_FLTUND;
break;
case TARGET_GEN_FLTINV:
- info.si_code = TARGET_FPE_FLTINV;
+ si_code = TARGET_FPE_FLTINV;
break;
case TARGET_GEN_FLTINE:
- info.si_code = TARGET_FPE_FLTRES;
+ si_code = TARGET_FPE_FLTRES;
break;
case TARGET_GEN_ROPRAND:
- info.si_code = TARGET_FPE_FLTUNK;
+ si_code = TARGET_FPE_FLTUNK;
break;
default:
- info.si_signo = TARGET_SIGTRAP;
- info.si_code = TARGET_TRAP_UNK;
- break;
+ goto do_sigtrap_unk;
}
- info.si_errno = 0;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGFPE, si_code, env->pc);
break;
default:
goto do_sigill;
}
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ do_sigtrap_brkpt:
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
+ break;
+ do_sigtrap_unk:
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_UNK, env->pc);
break;
case EXCP_INTERRUPT:
/* Just indicate that signals should be handled asap. */
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 04/24] linux-user/cris: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (2 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 03/24] linux-user/alpha: Use force_sig_fault Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 05/24] linux-user/hppa: " Richard Henderson
` (19 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/cris/cpu_loop.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/linux-user/cris/cpu_loop.c b/linux-user/cris/cpu_loop.c
index 0d5d268609..16a2e889e5 100644
--- a/linux-user/cris/cpu_loop.c
+++ b/linux-user/cris/cpu_loop.c
@@ -28,8 +28,7 @@ void cpu_loop(CPUCRISState *env)
{
CPUState *cs = env_cpu(env);
int trapnr, ret;
- target_siginfo_t info;
-
+
while (1) {
cpu_exec_start(cs);
trapnr = cpu_exec(cs);
@@ -38,8 +37,8 @@ void cpu_loop(CPUCRISState *env)
switch (trapnr) {
case EXCP_INTERRUPT:
- /* just indicate that signals should be handled asap */
- break;
+ /* just indicate that signals should be handled asap */
+ break;
case EXCP_BREAK:
ret = do_syscall(env,
env->regs[9],
@@ -57,10 +56,7 @@ void cpu_loop(CPUCRISState *env)
}
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 05/24] linux-user/hppa: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (3 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 04/24] linux-user/cris: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 06/24] linux-user/hppa: Use the proper si_code for PRIV_OPR, PRIV_REG, OVERFLOW Richard Henderson
` (18 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and missing si_code for SIGBUS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/hppa/cpu_loop.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c
index 375576c8f0..b09caa1111 100644
--- a/linux-user/hppa/cpu_loop.c
+++ b/linux-user/hppa/cpu_loop.c
@@ -110,7 +110,6 @@ static abi_ulong hppa_lws(CPUHPPAState *env)
void cpu_loop(CPUHPPAState *env)
{
CPUState *cs = env_cpu(env);
- target_siginfo_t info;
abi_ulong ret;
int trapnr;
@@ -147,26 +146,15 @@ void cpu_loop(CPUHPPAState *env)
case EXCP_ILL:
case EXCP_PRIV_OPR:
case EXCP_PRIV_REG:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPN;
- info._sifields._sigfault._addr = env->iaoq_f;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPN, env->iaoq_f);
break;
case EXCP_OVERFLOW:
case EXCP_COND:
case EXCP_ASSIST:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = 0;
- info._sifields._sigfault._addr = env->iaoq_f;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGFPE, 0, env->iaoq_f);
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->iaoq_f);
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 06/24] linux-user/hppa: Use the proper si_code for PRIV_OPR, PRIV_REG, OVERFLOW
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (4 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 05/24] linux-user/hppa: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 07/24] linux-user: Remove TARGET_NSIGFPE Richard Henderson
` (17 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
These si_codes have been properly set by the kernel since the beginning.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/hppa/cpu_loop.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c
index b09caa1111..8e13f84a64 100644
--- a/linux-user/hppa/cpu_loop.c
+++ b/linux-user/hppa/cpu_loop.c
@@ -144,11 +144,17 @@ void cpu_loop(CPUHPPAState *env)
env->iaoq_b = env->gr[31] + 4;
break;
case EXCP_ILL:
- case EXCP_PRIV_OPR:
- case EXCP_PRIV_REG:
force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPN, env->iaoq_f);
break;
+ case EXCP_PRIV_OPR:
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_PRVOPC, env->iaoq_f);
+ break;
+ case EXCP_PRIV_REG:
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_PRVREG, env->iaoq_f);
+ break;
case EXCP_OVERFLOW:
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTOVF, env->iaoq_f);
+ break;
case EXCP_COND:
case EXCP_ASSIST:
force_sig_fault(TARGET_SIGFPE, 0, env->iaoq_f);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 07/24] linux-user: Remove TARGET_NSIGFPE
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (5 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 06/24] linux-user/hppa: Use the proper si_code for PRIV_OPR, PRIV_REG, OVERFLOW Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 22:42 ` Philippe Mathieu-Daudé
2021-12-20 21:05 ` [PATCH v4 08/24] linux-user/hppa: Set FPE_CONDTRAP for COND Richard Henderson
` (16 subsequent siblings)
23 siblings, 1 reply; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: laurent
This define is unused, and we have no similar define for
the other signal sub-codes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/syscall_defs.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
index bc18a4f248..a738bdcecf 100644
--- a/linux-user/syscall_defs.h
+++ b/linux-user/syscall_defs.h
@@ -688,7 +688,6 @@ typedef struct target_siginfo {
#define TARGET_FPE_FLTINV (7) /* floating point invalid operation */
#define TARGET_FPE_FLTSUB (8) /* subscript out of range */
#define TARGET_FPE_FLTUNK (14) /* undiagnosed fp exception */
-#define TARGET_NSIGFPE 15
/*
* SIGSEGV si_codes
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 08/24] linux-user/hppa: Set FPE_CONDTRAP for COND
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (6 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 07/24] linux-user: Remove TARGET_NSIGFPE Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 22:44 ` Philippe Mathieu-Daudé
2021-12-20 21:05 ` [PATCH v4 09/24] linux-user/i386: Split out maybe_handle_vm86_trap Richard Henderson
` (15 subsequent siblings)
23 siblings, 1 reply; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: laurent
This si_code was changed in 75abf64287cab, for linux 4.17.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/syscall_defs.h | 1 +
linux-user/hppa/cpu_loop.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
index a738bdcecf..f9240702eb 100644
--- a/linux-user/syscall_defs.h
+++ b/linux-user/syscall_defs.h
@@ -688,6 +688,7 @@ typedef struct target_siginfo {
#define TARGET_FPE_FLTINV (7) /* floating point invalid operation */
#define TARGET_FPE_FLTSUB (8) /* subscript out of range */
#define TARGET_FPE_FLTUNK (14) /* undiagnosed fp exception */
+#define TARGET_FPE_CONDTRAP (15) /* trap on condition */
/*
* SIGSEGV si_codes
diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c
index 8e13f84a64..c33a59fef5 100644
--- a/linux-user/hppa/cpu_loop.c
+++ b/linux-user/hppa/cpu_loop.c
@@ -156,6 +156,8 @@ void cpu_loop(CPUHPPAState *env)
force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTOVF, env->iaoq_f);
break;
case EXCP_COND:
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_CONDTRAP, env->iaoq_f);
+ break;
case EXCP_ASSIST:
force_sig_fault(TARGET_SIGFPE, 0, env->iaoq_f);
break;
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 09/24] linux-user/i386: Split out maybe_handle_vm86_trap
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (7 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 08/24] linux-user/hppa: Set FPE_CONDTRAP for COND Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 10/24] linux-user/i386: Use force_sig, force_sig_fault Richard Henderson
` (14 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Reduce the number of ifdefs within cpu_loop().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/i386/cpu_loop.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c
index f6a1cc632b..a372cfe1b2 100644
--- a/linux-user/i386/cpu_loop.c
+++ b/linux-user/i386/cpu_loop.c
@@ -198,6 +198,17 @@ static void emulate_vsyscall(CPUX86State *env)
}
#endif
+static bool maybe_handle_vm86_trap(CPUX86State *env, int trapnr)
+{
+#ifndef TARGET_X86_64
+ if (env->eflags & VM_MASK) {
+ handle_vm86_trap(env, trapnr);
+ return true;
+ }
+#endif
+ return false;
+}
+
void cpu_loop(CPUX86State *env)
{
CPUState *cs = env_cpu(env);
@@ -259,12 +270,9 @@ void cpu_loop(CPUX86State *env)
break;
case EXCP0D_GPF:
/* XXX: potential problem if ABI32 */
-#ifndef TARGET_X86_64
- if (env->eflags & VM_MASK) {
- handle_vm86_fault(env);
+ if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
-#endif
gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
break;
case EXCP0E_PAGE:
@@ -274,22 +282,16 @@ void cpu_loop(CPUX86State *env)
env->cr[2]);
break;
case EXCP00_DIVZ:
-#ifndef TARGET_X86_64
- if (env->eflags & VM_MASK) {
- handle_vm86_trap(env, trapnr);
+ if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
-#endif
gen_signal(env, TARGET_SIGFPE, TARGET_FPE_INTDIV, env->eip);
break;
case EXCP01_DB:
case EXCP03_INT3:
-#ifndef TARGET_X86_64
- if (env->eflags & VM_MASK) {
- handle_vm86_trap(env, trapnr);
+ if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
-#endif
if (trapnr == EXCP01_DB) {
gen_signal(env, TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->eip);
} else {
@@ -298,12 +300,9 @@ void cpu_loop(CPUX86State *env)
break;
case EXCP04_INTO:
case EXCP05_BOUND:
-#ifndef TARGET_X86_64
- if (env->eflags & VM_MASK) {
- handle_vm86_trap(env, trapnr);
+ if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
-#endif
gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
break;
case EXCP06_ILLOP:
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 10/24] linux-user/i386: Use force_sig, force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (8 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 09/24] linux-user/i386: Split out maybe_handle_vm86_trap Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 11/24] linux-user/m68k: Use force_sig_fault Richard Henderson
` (13 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Replace the local gen_signal with the generic functions that match
how the kernel raises signals. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/i386/cpu_loop.c | 47 +++++++++++++++-----------------------
1 file changed, 18 insertions(+), 29 deletions(-)
diff --git a/linux-user/i386/cpu_loop.c b/linux-user/i386/cpu_loop.c
index a372cfe1b2..879d44b490 100644
--- a/linux-user/i386/cpu_loop.c
+++ b/linux-user/i386/cpu_loop.c
@@ -84,17 +84,6 @@ static void set_idt(int n, unsigned int dpl)
}
#endif
-static void gen_signal(CPUX86State *env, int sig, int code, abi_ptr addr)
-{
- target_siginfo_t info = {
- .si_signo = sig,
- .si_code = code,
- ._sifields._sigfault._addr = addr
- };
-
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-}
-
#ifdef TARGET_X86_64
static bool write_ok_or_segv(CPUX86State *env, abi_ptr addr, size_t len)
{
@@ -107,7 +96,7 @@ static bool write_ok_or_segv(CPUX86State *env, abi_ptr addr, size_t len)
}
env->error_code = PG_ERROR_W_MASK | PG_ERROR_U_MASK;
- gen_signal(env, TARGET_SIGSEGV, TARGET_SEGV_MAPERR, addr);
+ force_sig_fault(TARGET_SIGSEGV, TARGET_SEGV_MAPERR, addr);
return false;
}
@@ -193,8 +182,7 @@ static void emulate_vsyscall(CPUX86State *env)
return;
sigsegv:
- /* Like force_sig(SIGSEGV). */
- gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
+ force_sig(TARGET_SIGSEGV);
}
#endif
@@ -266,53 +254,54 @@ void cpu_loop(CPUX86State *env)
#endif
case EXCP0B_NOSEG:
case EXCP0C_STACK:
- gen_signal(env, TARGET_SIGBUS, TARGET_SI_KERNEL, 0);
+ force_sig(TARGET_SIGBUS);
break;
case EXCP0D_GPF:
/* XXX: potential problem if ABI32 */
if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
- gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
+ force_sig(TARGET_SIGSEGV);
break;
case EXCP0E_PAGE:
- gen_signal(env, TARGET_SIGSEGV,
- (env->error_code & 1 ?
- TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR),
- env->cr[2]);
+ force_sig_fault(TARGET_SIGSEGV,
+ (env->error_code & PG_ERROR_P_MASK ?
+ TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR),
+ env->cr[2]);
break;
case EXCP00_DIVZ:
if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
- gen_signal(env, TARGET_SIGFPE, TARGET_FPE_INTDIV, env->eip);
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTDIV, env->eip);
break;
case EXCP01_DB:
+ if (maybe_handle_vm86_trap(env, trapnr)) {
+ break;
+ }
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->eip);
+ break;
case EXCP03_INT3:
if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
- if (trapnr == EXCP01_DB) {
- gen_signal(env, TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->eip);
- } else {
- gen_signal(env, TARGET_SIGTRAP, TARGET_SI_KERNEL, 0);
- }
+ force_sig(TARGET_SIGTRAP);
break;
case EXCP04_INTO:
case EXCP05_BOUND:
if (maybe_handle_vm86_trap(env, trapnr)) {
break;
}
- gen_signal(env, TARGET_SIGSEGV, TARGET_SI_KERNEL, 0);
+ force_sig(TARGET_SIGSEGV);
break;
case EXCP06_ILLOP:
- gen_signal(env, TARGET_SIGILL, TARGET_ILL_ILLOPN, env->eip);
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPN, env->eip);
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
break;
case EXCP_DEBUG:
- gen_signal(env, TARGET_SIGTRAP, TARGET_TRAP_BRKPT, 0);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->eip);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 11/24] linux-user/m68k: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (9 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 10/24] linux-user/i386: Use force_sig, force_sig_fault Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 12/24] linux-user/microblaze: " Richard Henderson
` (12 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/m68k/cpu_loop.c | 24 ++++--------------------
1 file changed, 4 insertions(+), 20 deletions(-)
diff --git a/linux-user/m68k/cpu_loop.c b/linux-user/m68k/cpu_loop.c
index 790bd558c3..f6ea3b97ec 100644
--- a/linux-user/m68k/cpu_loop.c
+++ b/linux-user/m68k/cpu_loop.c
@@ -29,7 +29,6 @@ void cpu_loop(CPUM68KState *env)
CPUState *cs = env_cpu(env);
int trapnr;
unsigned int n;
- target_siginfo_t info;
for(;;) {
cpu_exec_start(cs);
@@ -46,25 +45,13 @@ void cpu_loop(CPUM68KState *env)
case EXCP_ILLEGAL:
case EXCP_LINEA:
case EXCP_LINEF:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPN;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPN, env->pc);
break;
case EXCP_CHK:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_INTOVF;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTOVF, env->pc);
break;
case EXCP_DIV0:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_INTDIV;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTDIV, env->pc);
break;
case EXCP_TRAP0:
{
@@ -91,10 +78,7 @@ void cpu_loop(CPUM68KState *env)
/* just indicate that signals should be handled asap */
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 12/24] linux-user/microblaze: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (10 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 11/24] linux-user/m68k: Use force_sig_fault Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 13/24] linux-user/microblaze: Fix SIGFPE si_codes Richard Henderson
` (11 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/microblaze/cpu_loop.c | 61 +++++++++++++-------------------
1 file changed, 25 insertions(+), 36 deletions(-)
diff --git a/linux-user/microblaze/cpu_loop.c b/linux-user/microblaze/cpu_loop.c
index a94467dd2d..263b68aea1 100644
--- a/linux-user/microblaze/cpu_loop.c
+++ b/linux-user/microblaze/cpu_loop.c
@@ -27,9 +27,8 @@
void cpu_loop(CPUMBState *env)
{
CPUState *cs = env_cpu(env);
- int trapnr, ret;
- target_siginfo_t info;
-
+ int trapnr, ret, si_code;
+
while (1) {
cpu_exec_start(cs);
trapnr = cpu_exec(cs);
@@ -38,8 +37,8 @@ void cpu_loop(CPUMBState *env)
switch (trapnr) {
case EXCP_INTERRUPT:
- /* just indicate that signals should be handled asap */
- break;
+ /* just indicate that signals should be handled asap */
+ break;
case EXCP_SYSCALL:
/* Return address is 4 bytes after the call. */
env->regs[14] += 4;
@@ -67,6 +66,7 @@ void cpu_loop(CPUMBState *env)
*/
env->regs[14] = env->pc;
break;
+
case EXCP_HW_EXCP:
env->regs[17] = env->pc + 4;
if (env->iflags & D_FLAG) {
@@ -74,42 +74,31 @@ void cpu_loop(CPUMBState *env)
env->pc -= 4;
/* FIXME: if branch was immed, replay the imm as well. */
}
-
env->iflags &= ~(IMM_FLAG | D_FLAG);
-
switch (env->esr & 31) {
- case ESR_EC_DIVZERO:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_FLTDIV;
- info._sifields._sigfault._addr = 0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case ESR_EC_FPU:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- if (env->fsr & FSR_IO) {
- info.si_code = TARGET_FPE_FLTINV;
- }
- if (env->fsr & FSR_DZ) {
- info.si_code = TARGET_FPE_FLTDIV;
- }
- info._sifields._sigfault._addr = 0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- default:
- fprintf(stderr, "Unhandled hw-exception: 0x%x\n",
- env->esr & ESR_EC_MASK);
- cpu_dump_state(cs, stderr, 0);
- exit(EXIT_FAILURE);
- break;
+ case ESR_EC_DIVZERO:
+ si_code = TARGET_FPE_FLTDIV;
+ break;
+ case ESR_EC_FPU:
+ si_code = 0;
+ if (env->fsr & FSR_IO) {
+ si_code = TARGET_FPE_FLTINV;
+ }
+ if (env->fsr & FSR_DZ) {
+ si_code = TARGET_FPE_FLTDIV;
+ }
+ break;
+ default:
+ fprintf(stderr, "Unhandled hw-exception: 0x%x\n",
+ env->esr & ESR_EC_MASK);
+ cpu_dump_state(cs, stderr, 0);
+ exit(EXIT_FAILURE);
}
+ force_sig_fault(TARGET_SIGFPE, si_code, env->pc);
break;
+
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 13/24] linux-user/microblaze: Fix SIGFPE si_codes
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (11 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 12/24] linux-user/microblaze: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 14/24] linux-user/mips: Improve do_break Richard Henderson
` (10 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Fix a typo for ESR_EC_DIVZERO, which is integral not floating-point.
Fix the if ladder for decoding floating-point exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/microblaze/cpu_loop.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/linux-user/microblaze/cpu_loop.c b/linux-user/microblaze/cpu_loop.c
index 263b68aea1..cf1668a45f 100644
--- a/linux-user/microblaze/cpu_loop.c
+++ b/linux-user/microblaze/cpu_loop.c
@@ -77,15 +77,25 @@ void cpu_loop(CPUMBState *env)
env->iflags &= ~(IMM_FLAG | D_FLAG);
switch (env->esr & 31) {
case ESR_EC_DIVZERO:
- si_code = TARGET_FPE_FLTDIV;
+ si_code = TARGET_FPE_INTDIV;
break;
case ESR_EC_FPU:
- si_code = 0;
- if (env->fsr & FSR_IO) {
+ /*
+ * Note that the kernel passes along fsr as si_code
+ * if there's no recognized bit set. Possibly this
+ * implies that si_code is 0, but follow the structure.
+ */
+ si_code = env->fsr;
+ if (si_code & FSR_IO) {
si_code = TARGET_FPE_FLTINV;
- }
- if (env->fsr & FSR_DZ) {
+ } else if (si_code & FSR_OF) {
+ si_code = TARGET_FPE_FLTOVF;
+ } else if (si_code & FSR_UF) {
+ si_code = TARGET_FPE_FLTUND;
+ } else if (si_code & FSR_DZ) {
si_code = TARGET_FPE_FLTDIV;
+ } else if (si_code & FSR_DO) {
+ si_code = TARGET_FPE_FLTRES;
}
break;
default:
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 14/24] linux-user/mips: Improve do_break
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (12 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 13/24] linux-user/microblaze: Fix SIGFPE si_codes Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 15/24] linux-user/mips: Use force_sig_fault Richard Henderson
` (9 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: laurent, Philippe Mathieu-Daudé
Rename to do_tr_or_bp, as per the kernel function.
Add a 'trap' argument, akin to the kernel's si_code, but clearer.
The return value is always 0, so change the return value to void.
Use force_sig and force_sig_fault.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/mips/cpu_loop.c | 46 +++++++++++++++++++++-----------------
1 file changed, 26 insertions(+), 20 deletions(-)
diff --git a/linux-user/mips/cpu_loop.c b/linux-user/mips/cpu_loop.c
index b735c99a24..7317194cc3 100644
--- a/linux-user/mips/cpu_loop.c
+++ b/linux-user/mips/cpu_loop.c
@@ -40,29 +40,25 @@ enum {
BRK_DIVZERO = 7
};
-static int do_break(CPUMIPSState *env, target_siginfo_t *info,
- unsigned int code)
+static void do_tr_or_bp(CPUMIPSState *env, unsigned int code, bool trap)
{
- int ret = -1;
+ target_ulong pc = env->active_tc.PC;
switch (code) {
case BRK_OVERFLOW:
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTOVF, pc);
+ break;
case BRK_DIVZERO:
- info->si_signo = TARGET_SIGFPE;
- info->si_errno = 0;
- info->si_code = (code == BRK_OVERFLOW) ? FPE_INTOVF : FPE_INTDIV;
- queue_signal(env, info->si_signo, QEMU_SI_FAULT, &*info);
- ret = 0;
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTDIV, pc);
break;
default:
- info->si_signo = TARGET_SIGTRAP;
- info->si_errno = 0;
- queue_signal(env, info->si_signo, QEMU_SI_FAULT, &*info);
- ret = 0;
+ if (trap) {
+ force_sig(TARGET_SIGTRAP);
+ } else {
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, pc);
+ }
break;
}
-
- return ret;
}
void cpu_loop(CPUMIPSState *env)
@@ -205,6 +201,13 @@ done_syscall:
abi_ulong trap_instr;
unsigned int code;
+ /*
+ * FIXME: It would be better to decode the trap number
+ * during translate, and store it in error_code while
+ * raising the exception. We should not be re-reading
+ * the opcode here.
+ */
+
if (env->hflags & MIPS_HFLAG_M16) {
if (env->insn_flags & ASE_MICROMIPS) {
/* microMIPS mode */
@@ -257,9 +260,7 @@ done_syscall:
}
}
- if (do_break(env, &info, code) != 0) {
- goto error;
- }
+ do_tr_or_bp(env, code, false);
}
break;
case EXCP_TRAP:
@@ -267,6 +268,13 @@ done_syscall:
abi_ulong trap_instr;
unsigned int code = 0;
+ /*
+ * FIXME: It would be better to decode the trap number
+ * during translate, and store it in error_code while
+ * raising the exception. We should not be re-reading
+ * the opcode here.
+ */
+
if (env->hflags & MIPS_HFLAG_M16) {
/* microMIPS mode */
abi_ulong instr[2];
@@ -293,9 +301,7 @@ done_syscall:
}
}
- if (do_break(env, &info, code) != 0) {
- goto error;
- }
+ do_tr_or_bp(env, code, true);
}
break;
case EXCP_ATOMIC:
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 15/24] linux-user/mips: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (13 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 14/24] linux-user/mips: Improve do_break Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 16/24] target/mips: Extract break code into env->error_code Richard Henderson
` (8 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP
and SIGFPE; use force_sig (SI_KERNEL) for EXCP_DSPDIS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/mips/cpu_loop.c | 38 +++++++++++++-------------------------
1 file changed, 13 insertions(+), 25 deletions(-)
diff --git a/linux-user/mips/cpu_loop.c b/linux-user/mips/cpu_loop.c
index 7317194cc3..034b31f853 100644
--- a/linux-user/mips/cpu_loop.c
+++ b/linux-user/mips/cpu_loop.c
@@ -64,8 +64,7 @@ static void do_tr_or_bp(CPUMIPSState *env, unsigned int code, bool trap)
void cpu_loop(CPUMIPSState *env)
{
CPUState *cs = env_cpu(env);
- target_siginfo_t info;
- int trapnr;
+ int trapnr, si_code;
abi_long ret;
# ifdef TARGET_ABI_MIPSO32
unsigned int syscall_num;
@@ -156,43 +155,32 @@ done_syscall:
break;
case EXCP_CpU:
case EXCP_RI:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = 0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ case EXCP_DSPDIS:
+ force_sig(TARGET_SIGILL);
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case EXCP_DSPDIS:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPC;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT,
+ env->active_tc.PC);
break;
case EXCP_FPE:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_FLTUNK;
+ si_code = TARGET_FPE_FLTUNK;
if (GET_FP_CAUSE(env->active_fpu.fcr31) & FP_INVALID) {
- info.si_code = TARGET_FPE_FLTINV;
+ si_code = TARGET_FPE_FLTINV;
} else if (GET_FP_CAUSE(env->active_fpu.fcr31) & FP_DIV0) {
- info.si_code = TARGET_FPE_FLTDIV;
+ si_code = TARGET_FPE_FLTDIV;
} else if (GET_FP_CAUSE(env->active_fpu.fcr31) & FP_OVERFLOW) {
- info.si_code = TARGET_FPE_FLTOVF;
+ si_code = TARGET_FPE_FLTOVF;
} else if (GET_FP_CAUSE(env->active_fpu.fcr31) & FP_UNDERFLOW) {
- info.si_code = TARGET_FPE_FLTUND;
+ si_code = TARGET_FPE_FLTUND;
} else if (GET_FP_CAUSE(env->active_fpu.fcr31) & FP_INEXACT) {
- info.si_code = TARGET_FPE_FLTRES;
+ si_code = TARGET_FPE_FLTRES;
}
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGFPE, si_code, env->active_tc.PC);
break;
+
/* The code below was inspired by the MIPS Linux kernel trap
* handling code in arch/mips/kernel/traps.c.
*/
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 16/24] target/mips: Extract break code into env->error_code
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (14 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 15/24] linux-user/mips: Use force_sig_fault Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 17/24] target/mips: Extract trap " Richard Henderson
` (7 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: laurent, Philippe Mathieu-Daudé
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
target/mips/tcg/translate.h | 1 +
linux-user/mips/cpu_loop.c | 73 +++--------------------
target/mips/tcg/translate.c | 12 +++-
target/mips/tcg/micromips_translate.c.inc | 6 +-
target/mips/tcg/mips16e_translate.c.inc | 2 +-
5 files changed, 25 insertions(+), 69 deletions(-)
diff --git a/target/mips/tcg/translate.h b/target/mips/tcg/translate.h
index 6111493651..ae01515efe 100644
--- a/target/mips/tcg/translate.h
+++ b/target/mips/tcg/translate.h
@@ -129,6 +129,7 @@ enum {
void generate_exception(DisasContext *ctx, int excp);
void generate_exception_err(DisasContext *ctx, int excp, int err);
void generate_exception_end(DisasContext *ctx, int excp);
+void generate_exception_break(DisasContext *ctx, int code);
void gen_reserved_instruction(DisasContext *ctx);
void check_insn(DisasContext *ctx, uint64_t flags);
diff --git a/linux-user/mips/cpu_loop.c b/linux-user/mips/cpu_loop.c
index 034b31f853..8efb6d2a24 100644
--- a/linux-user/mips/cpu_loop.c
+++ b/linux-user/mips/cpu_loop.c
@@ -65,6 +65,7 @@ void cpu_loop(CPUMIPSState *env)
{
CPUState *cs = env_cpu(env);
int trapnr, si_code;
+ unsigned int code;
abi_long ret;
# ifdef TARGET_ABI_MIPSO32
unsigned int syscall_num;
@@ -185,71 +186,15 @@ done_syscall:
* handling code in arch/mips/kernel/traps.c.
*/
case EXCP_BREAK:
- {
- abi_ulong trap_instr;
- unsigned int code;
-
- /*
- * FIXME: It would be better to decode the trap number
- * during translate, and store it in error_code while
- * raising the exception. We should not be re-reading
- * the opcode here.
- */
-
- if (env->hflags & MIPS_HFLAG_M16) {
- if (env->insn_flags & ASE_MICROMIPS) {
- /* microMIPS mode */
- ret = get_user_u16(trap_instr, env->active_tc.PC);
- if (ret != 0) {
- goto error;
- }
-
- if ((trap_instr >> 10) == 0x11) {
- /* 16-bit instruction */
- code = trap_instr & 0xf;
- } else {
- /* 32-bit instruction */
- abi_ulong instr_lo;
-
- ret = get_user_u16(instr_lo,
- env->active_tc.PC + 2);
- if (ret != 0) {
- goto error;
- }
- trap_instr = (trap_instr << 16) | instr_lo;
- code = ((trap_instr >> 6) & ((1 << 20) - 1));
- /* Unfortunately, microMIPS also suffers from
- the old assembler bug... */
- if (code >= (1 << 10)) {
- code >>= 10;
- }
- }
- } else {
- /* MIPS16e mode */
- ret = get_user_u16(trap_instr, env->active_tc.PC);
- if (ret != 0) {
- goto error;
- }
- code = (trap_instr >> 6) & 0x3f;
- }
- } else {
- ret = get_user_u32(trap_instr, env->active_tc.PC);
- if (ret != 0) {
- goto error;
- }
-
- /* As described in the original Linux kernel code, the
- * below checks on 'code' are to work around an old
- * assembly bug.
- */
- code = ((trap_instr >> 6) & ((1 << 20) - 1));
- if (code >= (1 << 10)) {
- code >>= 10;
- }
- }
-
- do_tr_or_bp(env, code, false);
+ /*
+ * As described in the original Linux kernel code, the below
+ * checks on 'code' are to work around an old assembly bug.
+ */
+ code = env->error_code;
+ if (code >= (1 << 10)) {
+ code >>= 10;
}
+ do_tr_or_bp(env, code, false);
break;
case EXCP_TRAP:
{
diff --git a/target/mips/tcg/translate.c b/target/mips/tcg/translate.c
index 47db35d7dd..a42f507aed 100644
--- a/target/mips/tcg/translate.c
+++ b/target/mips/tcg/translate.c
@@ -1367,6 +1367,16 @@ void generate_exception_end(DisasContext *ctx, int excp)
generate_exception_err(ctx, excp, 0);
}
+void generate_exception_break(DisasContext *ctx, int code)
+{
+#ifdef CONFIG_USER_ONLY
+ /* Pass the break code along to cpu_loop. */
+ tcg_gen_st_i32(tcg_constant_i32(code), cpu_env,
+ offsetof(CPUMIPSState, error_code));
+#endif
+ generate_exception_end(ctx, EXCP_BREAK);
+}
+
void gen_reserved_instruction(DisasContext *ctx)
{
generate_exception_end(ctx, EXCP_RI);
@@ -14160,7 +14170,7 @@ static void decode_opc_special(CPUMIPSState *env, DisasContext *ctx)
generate_exception_end(ctx, EXCP_SYSCALL);
break;
case OPC_BREAK:
- generate_exception_end(ctx, EXCP_BREAK);
+ generate_exception_break(ctx, extract32(ctx->opcode, 6, 20));
break;
case OPC_SYNC:
check_insn(ctx, ISA_MIPS2);
diff --git a/target/mips/tcg/micromips_translate.c.inc b/target/mips/tcg/micromips_translate.c.inc
index 0da4c802a3..f91f7a96cd 100644
--- a/target/mips/tcg/micromips_translate.c.inc
+++ b/target/mips/tcg/micromips_translate.c.inc
@@ -822,7 +822,7 @@ static void gen_pool16c_insn(DisasContext *ctx)
gen_HILO(ctx, OPC_MFLO, 0, uMIPS_RS5(ctx->opcode));
break;
case BREAK16:
- generate_exception_end(ctx, EXCP_BREAK);
+ generate_exception_break(ctx, extract32(ctx->opcode, 0, 4));
break;
case SDBBP16:
if (is_uhi(extract32(ctx->opcode, 0, 4))) {
@@ -937,7 +937,7 @@ static void gen_pool16c_r6_insn(DisasContext *ctx)
break;
case R6_BREAK16:
/* BREAK16 */
- generate_exception(ctx, EXCP_BREAK);
+ generate_exception_break(ctx, extract32(ctx->opcode, 6, 4));
break;
case R6_SDBBP16:
/* SDBBP16 */
@@ -1812,7 +1812,7 @@ static void decode_micromips32_opc(CPUMIPSState *env, DisasContext *ctx)
gen_pool32axf(env, ctx, rt, rs);
break;
case BREAK32:
- generate_exception_end(ctx, EXCP_BREAK);
+ generate_exception_break(ctx, extract32(ctx->opcode, 6, 20));
break;
case SIGRIE:
check_insn(ctx, ISA_MIPS_R6);
diff --git a/target/mips/tcg/mips16e_translate.c.inc b/target/mips/tcg/mips16e_translate.c.inc
index 84d816603a..f57e0a5f2a 100644
--- a/target/mips/tcg/mips16e_translate.c.inc
+++ b/target/mips/tcg/mips16e_translate.c.inc
@@ -969,7 +969,7 @@ static int decode_ase_mips16e(CPUMIPSState *env, DisasContext *ctx)
gen_slt(ctx, OPC_SLTU, 24, rx, ry);
break;
case RR_BREAK:
- generate_exception_end(ctx, EXCP_BREAK);
+ generate_exception_break(ctx, extract32(ctx->opcode, 5, 6));
break;
case RR_SLLV:
gen_shift(ctx, OPC_SLLV, ry, rx, ry);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 17/24] target/mips: Extract trap code into env->error_code
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (15 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 16/24] target/mips: Extract break code into env->error_code Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 18/24] linux-user/openrisc: Use force_sig_fault Richard Henderson
` (6 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: laurent, Philippe Mathieu-Daudé
Simplify cpu_loop by doing all of the decode in translate.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/mips/cpu_loop.c | 41 +----------------------
target/mips/tcg/translate.c | 24 ++++++++++---
target/mips/tcg/micromips_translate.c.inc | 4 +--
target/mips/tcg/nanomips_translate.c.inc | 4 +--
4 files changed, 25 insertions(+), 48 deletions(-)
diff --git a/linux-user/mips/cpu_loop.c b/linux-user/mips/cpu_loop.c
index 8efb6d2a24..6079c2d600 100644
--- a/linux-user/mips/cpu_loop.c
+++ b/linux-user/mips/cpu_loop.c
@@ -197,51 +197,12 @@ done_syscall:
do_tr_or_bp(env, code, false);
break;
case EXCP_TRAP:
- {
- abi_ulong trap_instr;
- unsigned int code = 0;
-
- /*
- * FIXME: It would be better to decode the trap number
- * during translate, and store it in error_code while
- * raising the exception. We should not be re-reading
- * the opcode here.
- */
-
- if (env->hflags & MIPS_HFLAG_M16) {
- /* microMIPS mode */
- abi_ulong instr[2];
-
- ret = get_user_u16(instr[0], env->active_tc.PC) ||
- get_user_u16(instr[1], env->active_tc.PC + 2);
-
- trap_instr = (instr[0] << 16) | instr[1];
- } else {
- ret = get_user_u32(trap_instr, env->active_tc.PC);
- }
-
- if (ret != 0) {
- goto error;
- }
-
- /* The immediate versions don't provide a code. */
- if (!(trap_instr & 0xFC000000)) {
- if (env->hflags & MIPS_HFLAG_M16) {
- /* microMIPS mode */
- code = ((trap_instr >> 12) & ((1 << 4) - 1));
- } else {
- code = ((trap_instr >> 6) & ((1 << 10) - 1));
- }
- }
-
- do_tr_or_bp(env, code, true);
- }
+ do_tr_or_bp(env, env->error_code, true);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
break;
default:
-error:
EXCP_DUMP(env, "qemu: unhandled CPU exception 0x%x - aborting\n", trapnr);
abort();
}
diff --git a/target/mips/tcg/translate.c b/target/mips/tcg/translate.c
index a42f507aed..98c0f1aab3 100644
--- a/target/mips/tcg/translate.c
+++ b/target/mips/tcg/translate.c
@@ -4733,7 +4733,7 @@ static void gen_loongson_lsdc2(DisasContext *ctx, int rt,
/* Traps */
static void gen_trap(DisasContext *ctx, uint32_t opc,
- int rs, int rt, int16_t imm)
+ int rs, int rt, int16_t imm, int code)
{
int cond;
TCGv t0 = tcg_temp_new();
@@ -4778,6 +4778,11 @@ static void gen_trap(DisasContext *ctx, uint32_t opc,
case OPC_TGEU: /* rs >= rs unsigned */
case OPC_TGEIU: /* r0 >= 0 unsigned */
/* Always trap */
+#ifdef CONFIG_USER_ONLY
+ /* Pass the break code along to cpu_loop. */
+ tcg_gen_st_i32(tcg_constant_i32(code), cpu_env,
+ offsetof(CPUMIPSState, error_code));
+#endif
generate_exception_end(ctx, EXCP_TRAP);
break;
case OPC_TLT: /* rs < rs */
@@ -4818,6 +4823,18 @@ static void gen_trap(DisasContext *ctx, uint32_t opc,
tcg_gen_brcond_tl(TCG_COND_EQ, t0, t1, l1);
break;
}
+#ifdef CONFIG_USER_ONLY
+ /* Pass the break code along to cpu_loop. */
+ tcg_gen_st_i32(tcg_constant_i32(code), cpu_env,
+ offsetof(CPUMIPSState, error_code));
+#endif
+ /* Like save_cpu_state, only don't update saved values. */
+ if (ctx->base.pc_next != ctx->saved_pc) {
+ gen_save_pc(ctx->base.pc_next);
+ }
+ if (ctx->hflags != ctx->saved_hflags) {
+ tcg_gen_movi_i32(hflags, ctx->hflags);
+ }
generate_exception(ctx, EXCP_TRAP);
gen_set_label(l1);
}
@@ -14155,7 +14172,7 @@ static void decode_opc_special(CPUMIPSState *env, DisasContext *ctx)
case OPC_TEQ:
case OPC_TNE:
check_insn(ctx, ISA_MIPS2);
- gen_trap(ctx, op1, rs, rt, -1);
+ gen_trap(ctx, op1, rs, rt, -1, extract32(ctx->opcode, 6, 10));
break;
case OPC_PMON:
/* Pmon entry point, also R4010 selsl */
@@ -15289,11 +15306,10 @@ static bool decode_opc_legacy(CPUMIPSState *env, DisasContext *ctx)
case OPC_TLTI:
case OPC_TLTIU:
case OPC_TEQI:
-
case OPC_TNEI:
check_insn(ctx, ISA_MIPS2);
check_insn_opc_removed(ctx, ISA_MIPS_R6);
- gen_trap(ctx, op1, rs, -1, imm);
+ gen_trap(ctx, op1, rs, -1, imm, 0);
break;
case OPC_SIGRIE:
check_insn(ctx, ISA_MIPS_R6);
diff --git a/target/mips/tcg/micromips_translate.c.inc b/target/mips/tcg/micromips_translate.c.inc
index f91f7a96cd..7e7d26a91b 100644
--- a/target/mips/tcg/micromips_translate.c.inc
+++ b/target/mips/tcg/micromips_translate.c.inc
@@ -1047,7 +1047,7 @@ static void gen_pool32axf(CPUMIPSState *env, DisasContext *ctx, int rt, int rs)
case TNE:
mips32_op = OPC_TNE;
do_trap:
- gen_trap(ctx, mips32_op, rs, rt, -1);
+ gen_trap(ctx, mips32_op, rs, rt, -1, extract32(ctx->opcode, 12, 4));
break;
#ifndef CONFIG_USER_ONLY
case MFC0:
@@ -2439,7 +2439,7 @@ static void decode_micromips32_opc(CPUMIPSState *env, DisasContext *ctx)
check_insn_opc_removed(ctx, ISA_MIPS_R6);
mips32_op = OPC_TEQI;
do_trapi:
- gen_trap(ctx, mips32_op, rs, -1, imm);
+ gen_trap(ctx, mips32_op, rs, -1, imm, 0);
break;
case BNEZC:
diff --git a/target/mips/tcg/nanomips_translate.c.inc b/target/mips/tcg/nanomips_translate.c.inc
index 2c022a49f2..916cece4d2 100644
--- a/target/mips/tcg/nanomips_translate.c.inc
+++ b/target/mips/tcg/nanomips_translate.c.inc
@@ -1268,11 +1268,11 @@ static void gen_pool32a0_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
switch (extract32(ctx->opcode, 10, 1)) {
case NM_TEQ:
check_nms(ctx);
- gen_trap(ctx, OPC_TEQ, rs, rt, -1);
+ gen_trap(ctx, OPC_TEQ, rs, rt, -1, rd);
break;
case NM_TNE:
check_nms(ctx);
- gen_trap(ctx, OPC_TNE, rs, rt, -1);
+ gen_trap(ctx, OPC_TNE, rs, rt, -1, rd);
break;
}
break;
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 18/24] linux-user/openrisc: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (16 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 17/24] target/mips: Extract trap " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 19/24] linux-user/ppc: " Richard Henderson
` (5 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Stafford Horne, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/openrisc/cpu_loop.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/linux-user/openrisc/cpu_loop.c b/linux-user/openrisc/cpu_loop.c
index 3cfdbbf037..9b3d6743d2 100644
--- a/linux-user/openrisc/cpu_loop.c
+++ b/linux-user/openrisc/cpu_loop.c
@@ -29,7 +29,6 @@ void cpu_loop(CPUOpenRISCState *env)
CPUState *cs = env_cpu(env);
int trapnr;
abi_long ret;
- target_siginfo_t info;
for (;;) {
cpu_exec_start(cs);
@@ -55,27 +54,16 @@ void cpu_loop(CPUOpenRISCState *env)
}
break;
case EXCP_ALIGN:
- info.si_signo = TARGET_SIGBUS;
- info.si_errno = 0;
- info.si_code = TARGET_BUS_ADRALN;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGBUS, TARGET_BUS_ADRALN, env->eear);
break;
case EXCP_ILLEGAL:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPC;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPC, env->pc);
break;
case EXCP_INTERRUPT:
/* We processed the pending cpu work above. */
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 19/24] linux-user/ppc: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (17 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 18/24] linux-user/openrisc: Use force_sig_fault Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 20/24] linux-user/riscv: " Richard Henderson
` (4 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
The fault address for POWERPC_EXCP_ISI is nip exactly, not nip - 4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/ppc/cpu_loop.c | 136 ++++++++------------------------------
1 file changed, 28 insertions(+), 108 deletions(-)
diff --git a/linux-user/ppc/cpu_loop.c b/linux-user/ppc/cpu_loop.c
index 483e669300..bb20300da9 100644
--- a/linux-user/ppc/cpu_loop.c
+++ b/linux-user/ppc/cpu_loop.c
@@ -76,8 +76,7 @@ int ppc_dcr_write (ppc_dcr_t *dcr_env, int dcrn, uint32_t val)
void cpu_loop(CPUPPCState *env)
{
CPUState *cs = env_cpu(env);
- target_siginfo_t info;
- int trapnr;
+ int trapnr, si_signo, si_code;
target_ulong ret;
for(;;) {
@@ -102,61 +101,10 @@ void cpu_loop(CPUPPCState *env)
"Aborting\n");
break;
case POWERPC_EXCP_DSI: /* Data storage exception */
- /* XXX: check this. Seems bugged */
- switch (env->error_code & 0xFF000000) {
- case 0x40000000:
- case 0x42000000:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SEGV_MAPERR;
- break;
- case 0x04000000:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLADR;
- break;
- case 0x08000000:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SEGV_ACCERR;
- break;
- default:
- /* Let's send a regular segfault... */
- EXCP_DUMP(env, "Invalid segfault errno (%02x)\n",
- env->error_code);
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SEGV_MAPERR;
- break;
- }
- info._sifields._sigfault._addr = env->spr[SPR_DAR];
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
case POWERPC_EXCP_ISI: /* Instruction storage exception */
- /* XXX: check this */
- switch (env->error_code & 0xFF000000) {
- case 0x40000000:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SEGV_MAPERR;
- break;
- case 0x10000000:
- case 0x08000000:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SEGV_ACCERR;
- break;
- default:
- /* Let's send a regular segfault... */
- EXCP_DUMP(env, "Invalid segfault errno (%02x)\n",
- env->error_code);
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = TARGET_SEGV_MAPERR;
- break;
- }
- info._sifields._sigfault._addr = env->nip - 4;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ /* FIXME: handle maperr in ppc_cpu_record_sigsegv. */
+ force_sig_fault(TARGET_SIGSEGV, TARGET_SEGV_MAPERR,
+ env->spr[SPR_DAR]);
break;
case POWERPC_EXCP_EXTERNAL: /* External input */
cpu_abort(cs, "External interrupt while in user mode. "
@@ -167,24 +115,23 @@ void cpu_loop(CPUPPCState *env)
/* XXX: check this */
switch (env->error_code & ~0xF) {
case POWERPC_EXCP_FP:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
+ si_signo = TARGET_SIGFPE;
switch (env->error_code & 0xF) {
case POWERPC_EXCP_FP_OX:
- info.si_code = TARGET_FPE_FLTOVF;
+ si_code = TARGET_FPE_FLTOVF;
break;
case POWERPC_EXCP_FP_UX:
- info.si_code = TARGET_FPE_FLTUND;
+ si_code = TARGET_FPE_FLTUND;
break;
case POWERPC_EXCP_FP_ZX:
case POWERPC_EXCP_FP_VXZDZ:
- info.si_code = TARGET_FPE_FLTDIV;
+ si_code = TARGET_FPE_FLTDIV;
break;
case POWERPC_EXCP_FP_XX:
- info.si_code = TARGET_FPE_FLTRES;
+ si_code = TARGET_FPE_FLTRES;
break;
case POWERPC_EXCP_FP_VXSOFT:
- info.si_code = TARGET_FPE_FLTINV;
+ si_code = TARGET_FPE_FLTINV;
break;
case POWERPC_EXCP_FP_VXSNAN:
case POWERPC_EXCP_FP_VXISI:
@@ -193,51 +140,50 @@ void cpu_loop(CPUPPCState *env)
case POWERPC_EXCP_FP_VXVC:
case POWERPC_EXCP_FP_VXSQRT:
case POWERPC_EXCP_FP_VXCVI:
- info.si_code = TARGET_FPE_FLTSUB;
+ si_code = TARGET_FPE_FLTSUB;
break;
default:
EXCP_DUMP(env, "Unknown floating point exception (%02x)\n",
env->error_code);
+ si_code = 0;
break;
}
break;
case POWERPC_EXCP_INVAL:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
+ si_signo = TARGET_SIGILL;
switch (env->error_code & 0xF) {
case POWERPC_EXCP_INVAL_INVAL:
- info.si_code = TARGET_ILL_ILLOPC;
+ si_code = TARGET_ILL_ILLOPC;
break;
case POWERPC_EXCP_INVAL_LSWX:
- info.si_code = TARGET_ILL_ILLOPN;
+ si_code = TARGET_ILL_ILLOPN;
break;
case POWERPC_EXCP_INVAL_SPR:
- info.si_code = TARGET_ILL_PRVREG;
+ si_code = TARGET_ILL_PRVREG;
break;
case POWERPC_EXCP_INVAL_FP:
- info.si_code = TARGET_ILL_COPROC;
+ si_code = TARGET_ILL_COPROC;
break;
default:
EXCP_DUMP(env, "Unknown invalid operation (%02x)\n",
env->error_code & 0xF);
- info.si_code = TARGET_ILL_ILLADR;
+ si_code = TARGET_ILL_ILLADR;
break;
}
break;
case POWERPC_EXCP_PRIV:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
+ si_signo = TARGET_SIGILL;
switch (env->error_code & 0xF) {
case POWERPC_EXCP_PRIV_OPC:
- info.si_code = TARGET_ILL_PRVOPC;
+ si_code = TARGET_ILL_PRVOPC;
break;
case POWERPC_EXCP_PRIV_REG:
- info.si_code = TARGET_ILL_PRVREG;
+ si_code = TARGET_ILL_PRVREG;
break;
default:
EXCP_DUMP(env, "Unknown privilege violation (%02x)\n",
env->error_code & 0xF);
- info.si_code = TARGET_ILL_PRVOPC;
+ si_code = TARGET_ILL_PRVOPC;
break;
}
break;
@@ -250,28 +196,19 @@ void cpu_loop(CPUPPCState *env)
env->error_code);
break;
}
- info._sifields._sigfault._addr = env->nip;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(si_signo, si_code, env->nip);
break;
case POWERPC_EXCP_FPU: /* Floating-point unavailable exception */
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_COPROC;
- info._sifields._sigfault._addr = env->nip;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ case POWERPC_EXCP_APU: /* Auxiliary processor unavailable */
+ case POWERPC_EXCP_SPEU: /* SPE/embedded floating-point unavail. */
+ case POWERPC_EXCP_VPU: /* Vector unavailable exception */
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_COPROC, env->nip);
break;
case POWERPC_EXCP_SYSCALL: /* System call exception */
case POWERPC_EXCP_SYSCALL_VECTORED:
cpu_abort(cs, "Syscall exception while in user mode. "
"Aborting\n");
break;
- case POWERPC_EXCP_APU: /* Auxiliary processor unavailable */
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_COPROC;
- info._sifields._sigfault._addr = env->nip;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
case POWERPC_EXCP_DECR: /* Decrementer exception */
cpu_abort(cs, "Decrementer interrupt while in user mode. "
"Aborting\n");
@@ -292,13 +229,6 @@ void cpu_loop(CPUPPCState *env)
cpu_abort(cs, "Instruction TLB exception while in user mode. "
"Aborting\n");
break;
- case POWERPC_EXCP_SPEU: /* SPE/embedded floating-point unavail. */
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_COPROC;
- info._sifields._sigfault._addr = env->nip;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
case POWERPC_EXCP_EFPDI: /* Embedded floating-point data IRQ */
cpu_abort(cs, "Embedded floating-point data IRQ not handled\n");
break;
@@ -355,13 +285,6 @@ void cpu_loop(CPUPPCState *env)
cpu_abort(cs, "Hypervisor instruction segment exception "
"while in user mode. Aborting\n");
break;
- case POWERPC_EXCP_VPU: /* Vector unavailable exception */
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_COPROC;
- info._sifields._sigfault._addr = env->nip;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
case POWERPC_EXCP_PIT: /* Programmable interval timer IRQ */
cpu_abort(cs, "Programmable interval timer interrupt "
"while in user mode. Aborting\n");
@@ -444,10 +367,7 @@ void cpu_loop(CPUPPCState *env)
env->gpr[3] = ret;
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->nip);
break;
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 20/24] linux-user/riscv: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (18 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 19/24] linux-user/ppc: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 21/24] linux-user/s390x: " Richard Henderson
` (3 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fix missing PC from EXCP_DEBUG by
merging the case with EXCP_BREAKPOINT.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/riscv/cpu_loop.c | 31 +++++--------------------------
1 file changed, 5 insertions(+), 26 deletions(-)
diff --git a/linux-user/riscv/cpu_loop.c b/linux-user/riscv/cpu_loop.c
index b301dac802..92a5a113f6 100644
--- a/linux-user/riscv/cpu_loop.c
+++ b/linux-user/riscv/cpu_loop.c
@@ -30,8 +30,7 @@
void cpu_loop(CPURISCVState *env)
{
CPUState *cs = env_cpu(env);
- int trapnr, signum, sigcode;
- target_ulong sigaddr;
+ int trapnr;
target_ulong ret;
for (;;) {
@@ -40,10 +39,6 @@ void cpu_loop(CPURISCVState *env)
cpu_exec_end(cs);
process_queued_cpu_work(cs);
- signum = 0;
- sigcode = 0;
- sigaddr = 0;
-
switch (trapnr) {
case EXCP_INTERRUPT:
/* just indicate that signals should be handled asap */
@@ -79,39 +74,23 @@ void cpu_loop(CPURISCVState *env)
}
break;
case RISCV_EXCP_ILLEGAL_INST:
- signum = TARGET_SIGILL;
- sigcode = TARGET_ILL_ILLOPC;
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPC, env->pc);
break;
case RISCV_EXCP_BREAKPOINT:
- signum = TARGET_SIGTRAP;
- sigcode = TARGET_TRAP_BRKPT;
- sigaddr = env->pc;
+ case EXCP_DEBUG:
+ gdbstep:
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
break;
case RISCV_EXCP_SEMIHOST:
env->gpr[xA0] = do_common_semihosting(cs);
env->pc += 4;
break;
- case EXCP_DEBUG:
- gdbstep:
- signum = TARGET_SIGTRAP;
- sigcode = TARGET_TRAP_BRKPT;
- break;
default:
EXCP_DUMP(env, "\nqemu: unhandled CPU exception %#x - aborting\n",
trapnr);
exit(EXIT_FAILURE);
}
- if (signum) {
- target_siginfo_t info = {
- .si_signo = signum,
- .si_errno = 0,
- .si_code = sigcode,
- ._sifields._sigfault._addr = sigaddr
- };
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- }
-
process_pending_signals(env);
}
}
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 21/24] linux-user/s390x: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (19 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 20/24] linux-user/riscv: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 22/24] linux-user/sh4: " Richard Henderson
` (2 subsequent siblings)
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/s390x/cpu_loop.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/linux-user/s390x/cpu_loop.c b/linux-user/s390x/cpu_loop.c
index d089c8417e..0965d3abca 100644
--- a/linux-user/s390x/cpu_loop.c
+++ b/linux-user/s390x/cpu_loop.c
@@ -58,7 +58,6 @@ void cpu_loop(CPUS390XState *env)
{
CPUState *cs = env_cpu(env);
int trapnr, n, sig;
- target_siginfo_t info;
target_ulong addr;
abi_long ret;
@@ -158,11 +157,7 @@ void cpu_loop(CPUS390XState *env)
*/
env->psw.addr += env->int_pgm_ilen;
do_signal:
- info.si_signo = sig;
- info.si_errno = 0;
- info.si_code = n;
- info._sifields._sigfault._addr = addr;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(sig, n, addr);
break;
case EXCP_ATOMIC:
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 22/24] linux-user/sh4: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (20 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 21/24] linux-user/s390x: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 23/24] linux-user/sparc: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 24/24] linux-user/xtensa: " Richard Henderson
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/sh4/cpu_loop.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/linux-user/sh4/cpu_loop.c b/linux-user/sh4/cpu_loop.c
index ac9b01840c..fb561f1113 100644
--- a/linux-user/sh4/cpu_loop.c
+++ b/linux-user/sh4/cpu_loop.c
@@ -28,7 +28,6 @@ void cpu_loop(CPUSH4State *env)
{
CPUState *cs = env_cpu(env);
int trapnr, ret;
- target_siginfo_t info;
while (1) {
bool arch_interrupt = true;
@@ -60,10 +59,7 @@ void cpu_loop(CPUSH4State *env)
/* just indicate that signals should be handled asap */
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 23/24] linux-user/sparc: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (21 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 22/24] linux-user/sh4: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
2021-12-20 21:05 ` [PATCH v4 24/24] linux-user/xtensa: " Richard Henderson
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/sparc/cpu_loop.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/linux-user/sparc/cpu_loop.c b/linux-user/sparc/cpu_loop.c
index 0ba65e431c..b3e44bc1aa 100644
--- a/linux-user/sparc/cpu_loop.c
+++ b/linux-user/sparc/cpu_loop.c
@@ -155,7 +155,6 @@ void cpu_loop (CPUSPARCState *env)
CPUState *cs = env_cpu(env);
int trapnr;
abi_long ret;
- target_siginfo_t info;
while (1) {
cpu_exec_start(cs);
@@ -241,19 +240,10 @@ void cpu_loop (CPUSPARCState *env)
/* just indicate that signals should be handled asap */
break;
case TT_ILL_INSN:
- {
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPC;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- }
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPC, env->pc);
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT, env->pc);
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v4 24/24] linux-user/xtensa: Use force_sig_fault
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
` (22 preceding siblings ...)
2021-12-20 21:05 ` [PATCH v4 23/24] linux-user/sparc: " Richard Henderson
@ 2021-12-20 21:05 ` Richard Henderson
23 siblings, 0 replies; 27+ messages in thread
From: Richard Henderson @ 2021-12-20 21:05 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, laurent
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/xtensa/cpu_loop.c | 26 +++++++++-----------------
1 file changed, 9 insertions(+), 17 deletions(-)
diff --git a/linux-user/xtensa/cpu_loop.c b/linux-user/xtensa/cpu_loop.c
index a83490ab35..34775feb7c 100644
--- a/linux-user/xtensa/cpu_loop.c
+++ b/linux-user/xtensa/cpu_loop.c
@@ -126,7 +126,6 @@ static void xtensa_underflow12(CPUXtensaState *env)
void cpu_loop(CPUXtensaState *env)
{
CPUState *cs = env_cpu(env);
- target_siginfo_t info;
abi_ulong ret;
int trapnr;
@@ -163,14 +162,12 @@ void cpu_loop(CPUXtensaState *env)
case EXC_USER:
switch (env->sregs[EXCCAUSE]) {
case ILLEGAL_INSTRUCTION_CAUSE:
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_ILLOPC,
+ env->sregs[EPC1]);
+ break;
case PRIVILEGED_CAUSE:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code =
- env->sregs[EXCCAUSE] == ILLEGAL_INSTRUCTION_CAUSE ?
- TARGET_ILL_ILLOPC : TARGET_ILL_PRVOPC;
- info._sifields._sigfault._addr = env->sregs[EPC1];
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGILL, TARGET_ILL_PRVOPC,
+ env->sregs[EPC1]);
break;
case SYSCALL_CAUSE:
@@ -219,11 +216,8 @@ void cpu_loop(CPUXtensaState *env)
break;
case INTEGER_DIVIDE_BY_ZERO_CAUSE:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_INTDIV;
- info._sifields._sigfault._addr = env->sregs[EPC1];
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTDIV,
+ env->sregs[EPC1]);
break;
default:
@@ -232,10 +226,8 @@ void cpu_loop(CPUXtensaState *env)
}
break;
case EXCP_DEBUG:
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ force_sig_fault(TARGET_SIGTRAP, TARGET_TRAP_BRKPT,
+ env->sregs[EPC1]);
break;
case EXC_DEBUG:
default:
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v4 07/24] linux-user: Remove TARGET_NSIGFPE
2021-12-20 21:05 ` [PATCH v4 07/24] linux-user: Remove TARGET_NSIGFPE Richard Henderson
@ 2021-12-20 22:42 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-20 22:42 UTC (permalink / raw)
To: Richard Henderson, qemu-devel; +Cc: laurent
On 12/20/21 22:05, Richard Henderson wrote:
> This define is unused, and we have no similar define for
> the other signal sub-codes.
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
> linux-user/syscall_defs.h | 1 -
> 1 file changed, 1 deletion(-)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v4 08/24] linux-user/hppa: Set FPE_CONDTRAP for COND
2021-12-20 21:05 ` [PATCH v4 08/24] linux-user/hppa: Set FPE_CONDTRAP for COND Richard Henderson
@ 2021-12-20 22:44 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-20 22:44 UTC (permalink / raw)
To: Richard Henderson, qemu-devel; +Cc: Helge Deller, laurent
On 12/20/21 22:05, Richard Henderson wrote:
> This si_code was changed in 75abf64287cab, for linux 4.17.
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
> linux-user/syscall_defs.h | 1 +
> linux-user/hppa/cpu_loop.c | 2 ++
> 2 files changed, 3 insertions(+)
>
> diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
> index a738bdcecf..f9240702eb 100644
> --- a/linux-user/syscall_defs.h
> +++ b/linux-user/syscall_defs.h
> @@ -688,6 +688,7 @@ typedef struct target_siginfo {
> #define TARGET_FPE_FLTINV (7) /* floating point invalid operation */
> #define TARGET_FPE_FLTSUB (8) /* subscript out of range */
> #define TARGET_FPE_FLTUNK (14) /* undiagnosed fp exception */
> +#define TARGET_FPE_CONDTRAP (15) /* trap on condition */
>
> /*
> * SIGSEGV si_codes
> diff --git a/linux-user/hppa/cpu_loop.c b/linux-user/hppa/cpu_loop.c
> index 8e13f84a64..c33a59fef5 100644
> --- a/linux-user/hppa/cpu_loop.c
> +++ b/linux-user/hppa/cpu_loop.c
> @@ -156,6 +156,8 @@ void cpu_loop(CPUHPPAState *env)
> force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTOVF, env->iaoq_f);
> break;
> case EXCP_COND:
> + force_sig_fault(TARGET_SIGFPE, TARGET_FPE_CONDTRAP, env->iaoq_f);
> + break;
> case EXCP_ASSIST:
> force_sig_fault(TARGET_SIGFPE, 0, env->iaoq_f);
> break;
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2021-12-20 22:45 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-20 21:05 [PATCH v4 00/24] linux-user: Clean up siginfo_t handling Richard Henderson
2021-12-20 21:05 ` [PATCH v4 01/24] linux-user/alpha: Set TRAP_UNK for bugchk and unknown gentrap Richard Henderson
2021-12-20 21:05 ` [PATCH v4 02/24] linux-user/alpha: Set FPE_FLTUNK for gentrap ROPRAND Richard Henderson
2021-12-20 21:05 ` [PATCH v4 03/24] linux-user/alpha: Use force_sig_fault Richard Henderson
2021-12-20 21:05 ` [PATCH v4 04/24] linux-user/cris: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 05/24] linux-user/hppa: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 06/24] linux-user/hppa: Use the proper si_code for PRIV_OPR, PRIV_REG, OVERFLOW Richard Henderson
2021-12-20 21:05 ` [PATCH v4 07/24] linux-user: Remove TARGET_NSIGFPE Richard Henderson
2021-12-20 22:42 ` Philippe Mathieu-Daudé
2021-12-20 21:05 ` [PATCH v4 08/24] linux-user/hppa: Set FPE_CONDTRAP for COND Richard Henderson
2021-12-20 22:44 ` Philippe Mathieu-Daudé
2021-12-20 21:05 ` [PATCH v4 09/24] linux-user/i386: Split out maybe_handle_vm86_trap Richard Henderson
2021-12-20 21:05 ` [PATCH v4 10/24] linux-user/i386: Use force_sig, force_sig_fault Richard Henderson
2021-12-20 21:05 ` [PATCH v4 11/24] linux-user/m68k: Use force_sig_fault Richard Henderson
2021-12-20 21:05 ` [PATCH v4 12/24] linux-user/microblaze: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 13/24] linux-user/microblaze: Fix SIGFPE si_codes Richard Henderson
2021-12-20 21:05 ` [PATCH v4 14/24] linux-user/mips: Improve do_break Richard Henderson
2021-12-20 21:05 ` [PATCH v4 15/24] linux-user/mips: Use force_sig_fault Richard Henderson
2021-12-20 21:05 ` [PATCH v4 16/24] target/mips: Extract break code into env->error_code Richard Henderson
2021-12-20 21:05 ` [PATCH v4 17/24] target/mips: Extract trap " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 18/24] linux-user/openrisc: Use force_sig_fault Richard Henderson
2021-12-20 21:05 ` [PATCH v4 19/24] linux-user/ppc: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 20/24] linux-user/riscv: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 21/24] linux-user/s390x: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 22/24] linux-user/sh4: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 23/24] linux-user/sparc: " Richard Henderson
2021-12-20 21:05 ` [PATCH v4 24/24] linux-user/xtensa: " Richard Henderson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.