* [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013
@ 2021-12-21 11:22 Antoniu Miclaus
2021-12-21 11:22 ` [PATCH v7 2/3] dt-bindings: iio: frequency: add admv1013 doc Antoniu Miclaus
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Antoniu Miclaus @ 2021-12-21 11:22 UTC (permalink / raw)
To: jic23, robh+dt, linux-iio, devicetree, linux-kernel; +Cc: Antoniu Miclaus
The ADMV1013 is a wideband, microwave upconverter optimized
for point to point microwave radio designs operating in the
24 GHz to 44 GHz radio frequency (RF) range.
Datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1013.pdf
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v7:
- rework read/write function + add write_raw/read_raw
- remove unnecessary includes
- rename `phase` -> `calibphase`
drivers/iio/frequency/Kconfig | 11 +
drivers/iio/frequency/Makefile | 1 +
drivers/iio/frequency/admv1013.c | 656 +++++++++++++++++++++++++++++++
3 files changed, 668 insertions(+)
create mode 100644 drivers/iio/frequency/admv1013.c
diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
index 240b81502512..411b3b961e46 100644
--- a/drivers/iio/frequency/Kconfig
+++ b/drivers/iio/frequency/Kconfig
@@ -49,5 +49,16 @@ config ADF4371
To compile this driver as a module, choose M here: the
module will be called adf4371.
+
+config ADMV1013
+ tristate "Analog Devices ADMV1013 Microwave Upconverter"
+ depends on SPI && COMMON_CLK
+ help
+ Say yes here to build support for Analog Devices ADMV1013
+ 24 GHz to 44 GHz, Wideband, Microwave Upconverter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called admv1013.
+
endmenu
endmenu
diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
index 518b1e50caef..559922a8196e 100644
--- a/drivers/iio/frequency/Makefile
+++ b/drivers/iio/frequency/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_AD9523) += ad9523.o
obj-$(CONFIG_ADF4350) += adf4350.o
obj-$(CONFIG_ADF4371) += adf4371.o
+obj-$(CONFIG_ADMV1013) += admv1013.o
diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
new file mode 100644
index 000000000000..6cdeb50143af
--- /dev/null
+++ b/drivers/iio/frequency/admv1013.c
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADMV1013 driver
+ *
+ * Copyright 2021 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/notifier.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/units.h>
+
+#include <asm/unaligned.h>
+
+/* ADMV1013 Register Map */
+#define ADMV1013_REG_SPI_CONTROL 0x00
+#define ADMV1013_REG_ALARM 0x01
+#define ADMV1013_REG_ALARM_MASKS 0x02
+#define ADMV1013_REG_ENABLE 0x03
+#define ADMV1013_REG_LO_AMP_I 0x05
+#define ADMV1013_REG_LO_AMP_Q 0x06
+#define ADMV1013_REG_OFFSET_ADJUST_I 0x07
+#define ADMV1013_REG_OFFSET_ADJUST_Q 0x08
+#define ADMV1013_REG_QUAD 0x09
+#define ADMV1013_REG_VVA_TEMP_COMP 0x0A
+
+/* ADMV1013_REG_SPI_CONTROL Map */
+#define ADMV1013_PARITY_EN_MSK BIT(15)
+#define ADMV1013_SPI_SOFT_RESET_MSK BIT(14)
+#define ADMV1013_CHIP_ID_MSK GENMASK(11, 4)
+#define ADMV1013_CHIP_ID 0xA
+#define ADMV1013_REVISION_ID_MSK GENMASK(3, 0)
+
+/* ADMV1013_REG_ALARM Map */
+#define ADMV1013_PARITY_ERROR_MSK BIT(15)
+#define ADMV1013_TOO_FEW_ERRORS_MSK BIT(14)
+#define ADMV1013_TOO_MANY_ERRORS_MSK BIT(13)
+#define ADMV1013_ADDRESS_RANGE_ERROR_MSK BIT(12)
+
+/* ADMV1013_REG_ENABLE Map */
+#define ADMV1013_VGA_PD_MSK BIT(15)
+#define ADMV1013_MIXER_PD_MSK BIT(14)
+#define ADMV1013_QUAD_PD_MSK GENMASK(13, 11)
+#define ADMV1013_BG_PD_MSK BIT(10)
+#define ADMV1013_MIXER_IF_EN_MSK BIT(7)
+#define ADMV1013_DET_EN_MSK BIT(5)
+
+/* ADMV1013_REG_LO_AMP Map */
+#define ADMV1013_LOAMP_PH_ADJ_FINE_MSK GENMASK(13, 7)
+#define ADMV1013_MIXER_VGATE_MSK GENMASK(6, 0)
+
+/* ADMV1013_REG_OFFSET_ADJUST Map */
+#define ADMV1013_MIXER_OFF_ADJ_P_MSK GENMASK(15, 9)
+#define ADMV1013_MIXER_OFF_ADJ_N_MSK GENMASK(8, 2)
+
+/* ADMV1013_REG_QUAD Map */
+#define ADMV1013_QUAD_SE_MODE_MSK GENMASK(9, 6)
+#define ADMV1013_QUAD_FILTERS_MSK GENMASK(3, 0)
+
+/* ADMV1013_REG_VVA_TEMP_COMP Map */
+#define ADMV1013_VVA_TEMP_COMP_MSK GENMASK(15, 0)
+
+/* ADMV1013 Miscellaneous Defines */
+#define ADMV1013_READ BIT(7)
+#define ADMV1013_REG_ADDR_READ_MSK GENMASK(6, 1)
+#define ADMV1013_REG_ADDR_WRITE_MSK GENMASK(22, 17)
+#define ADMV1013_REG_DATA_MSK GENMASK(16, 1)
+
+enum {
+ ADMV1013_IQ_MODE,
+ ADMV1013_IF_MODE
+};
+
+enum {
+ ADMV1013_RFMOD_I_CALIBPHASE,
+ ADMV1013_RFMOD_Q_CALIBPHASE,
+};
+
+enum {
+ ADMV1013_SE_MODE_POS = 6,
+ ADMV1013_SE_MODE_NEG = 9,
+ ADMV1013_SE_MODE_DIFF = 12
+};
+
+struct admv1013_state {
+ struct spi_device *spi;
+ struct clk *clkin;
+ /* Protect against concurrent accesses to the device and to data */
+ struct mutex lock;
+ struct regulator *reg;
+ struct notifier_block nb;
+ unsigned int input_mode;
+ unsigned int quad_se_mode;
+ bool det_en;
+ u8 data[3] ____cacheline_aligned;
+};
+
+static int __admv1013_spi_read(struct admv1013_state *st, unsigned int reg,
+ unsigned int *val)
+{
+ int ret;
+ struct spi_transfer t = {0};
+
+ st->data[0] = ADMV1013_READ | FIELD_PREP(ADMV1013_REG_ADDR_READ_MSK, reg);
+ st->data[1] = 0x0;
+ st->data[2] = 0x0;
+
+ t.rx_buf = &st->data[0];
+ t.tx_buf = &st->data[0];
+ t.len = 3;
+
+ ret = spi_sync_transfer(st->spi, &t, 1);
+ if (ret)
+ return ret;
+
+ *val = FIELD_GET(ADMV1013_REG_DATA_MSK, get_unaligned_be24(&st->data[0]));
+
+ return ret;
+}
+
+static int admv1013_spi_read(struct admv1013_state *st, unsigned int reg,
+ unsigned int *val)
+{
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = __admv1013_spi_read(st, reg, val);
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int __admv1013_spi_write(struct admv1013_state *st,
+ unsigned int reg,
+ unsigned int val)
+{
+ put_unaligned_be24(FIELD_PREP(ADMV1013_REG_DATA_MSK, val) |
+ FIELD_PREP(ADMV1013_REG_ADDR_WRITE_MSK, reg), &st->data[0]);
+
+ return spi_write(st->spi, &st->data[0], 3);
+}
+
+static int admv1013_spi_write(struct admv1013_state *st, unsigned int reg,
+ unsigned int val)
+{
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = __admv1013_spi_write(st, reg, val);
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int __admv1013_spi_update_bits(struct admv1013_state *st, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ int ret;
+ unsigned int data, temp;
+
+ ret = __admv1013_spi_read(st, reg, &data);
+ if (ret)
+ return ret;
+
+ temp = (data & ~mask) | (val & mask);
+
+ return __admv1013_spi_write(st, reg, temp);
+}
+
+static int admv1013_spi_update_bits(struct admv1013_state *st, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = __admv1013_spi_update_bits(st, reg, mask, val);
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int admv1013_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long info)
+{
+ struct admv1013_state *st = iio_priv(indio_dev);
+ unsigned int data, addr;
+ int ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->channel) {
+ case IIO_MOD_I:
+ addr = ADMV1013_REG_OFFSET_ADJUST_I;
+ break;
+ case IIO_MOD_Q:
+ addr = ADMV1013_REG_OFFSET_ADJUST_Q;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = admv1013_spi_read(st, addr, &data);
+ if (ret)
+ return ret;
+
+ if (!chan->channel)
+ *val = FIELD_GET(ADMV1013_MIXER_OFF_ADJ_P_MSK, data);
+ else
+ *val = FIELD_GET(ADMV1013_MIXER_OFF_ADJ_N_MSK, data);
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int admv1013_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long info)
+{
+ struct admv1013_state *st = iio_priv(indio_dev);
+ unsigned int addr, data, msk;
+
+ switch (info) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->channel2) {
+ case IIO_MOD_I:
+ addr = ADMV1013_REG_OFFSET_ADJUST_I;
+ break;
+ case IIO_MOD_Q:
+ addr = ADMV1013_REG_OFFSET_ADJUST_Q;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (!chan->channel) {
+ msk = ADMV1013_MIXER_OFF_ADJ_P_MSK;
+ data = FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_P_MSK, val);
+ } else {
+ msk = ADMV1013_MIXER_OFF_ADJ_N_MSK;
+ data = FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_N_MSK, val);
+ }
+
+ return admv1013_spi_update_bits(st, addr, msk, data);
+ default:
+ return -EINVAL;
+ }
+}
+
+static ssize_t admv1013_read(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ char *buf)
+{
+ struct admv1013_state *st = iio_priv(indio_dev);
+ unsigned int data, addr;
+ int ret;
+
+ switch ((u32)private) {
+ case ADMV1013_RFMOD_I_CALIBPHASE:
+ addr = ADMV1013_REG_LO_AMP_I;
+ break;
+ case ADMV1013_RFMOD_Q_CALIBPHASE:
+ addr = ADMV1013_REG_LO_AMP_Q;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = admv1013_spi_read(st, addr, &data);
+ if (ret)
+ return ret;
+
+ data = FIELD_GET(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
+
+ return sysfs_emit(buf, "%u\n", data);
+}
+
+static ssize_t admv1013_write(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ const char *buf, size_t len)
+{
+ struct admv1013_state *st = iio_priv(indio_dev);
+ unsigned int data;
+ int ret;
+
+ ret = kstrtou32(buf, 10, &data);
+ if (ret)
+ return ret;
+
+ data = FIELD_PREP(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
+
+ switch ((u32)private) {
+ case ADMV1013_RFMOD_I_CALIBPHASE:
+ ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_I,
+ ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
+ data);
+ if (ret)
+ return ret;
+ break;
+ case ADMV1013_RFMOD_Q_CALIBPHASE:
+ ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_Q,
+ ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
+ data);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret ? ret : len;
+}
+
+static int admv1013_update_quad_filters(struct admv1013_state *st)
+{
+ unsigned int filt_raw;
+ u64 rate = clk_get_rate(st->clkin);
+
+ if (rate >= (5400 * HZ_PER_MHZ) && rate <= (7000 * HZ_PER_MHZ))
+ filt_raw = 15;
+ else if (rate >= (5400 * HZ_PER_MHZ) && rate <= (8000 * HZ_PER_MHZ))
+ filt_raw = 10;
+ else if (rate >= (6600 * HZ_PER_MHZ) && rate <= (9200 * HZ_PER_MHZ))
+ filt_raw = 5;
+ else
+ filt_raw = 0;
+
+ return __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
+ ADMV1013_QUAD_FILTERS_MSK,
+ FIELD_PREP(ADMV1013_QUAD_FILTERS_MSK, filt_raw));
+}
+
+static int admv1013_update_mixer_vgate(struct admv1013_state *st)
+{
+ unsigned int vcm, mixer_vgate;
+
+ vcm = regulator_get_voltage(st->reg);
+
+ if (vcm >= 0 && vcm < 1800000)
+ mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100;
+ else if (vcm > 1800000 && vcm < 2600000)
+ mixer_vgate = (2375 * vcm / 1000000 + 125) / 100;
+ else
+ return -EINVAL;
+
+ return __admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_I,
+ ADMV1013_MIXER_VGATE_MSK,
+ FIELD_PREP(ADMV1013_MIXER_VGATE_MSK, mixer_vgate));
+}
+
+static int admv1013_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg,
+ unsigned int write_val,
+ unsigned int *read_val)
+{
+ struct admv1013_state *st = iio_priv(indio_dev);
+
+ if (read_val)
+ return admv1013_spi_read(st, reg, read_val);
+ else
+ return admv1013_spi_write(st, reg, write_val);
+}
+
+static const struct iio_info admv1013_info = {
+ .read_raw = admv1013_read_raw,
+ .write_raw = admv1013_write_raw,
+ .debugfs_reg_access = &admv1013_reg_access,
+};
+
+static int admv1013_freq_change(struct notifier_block *nb, unsigned long action, void *data)
+{
+ struct admv1013_state *st = container_of(nb, struct admv1013_state, nb);
+ int ret;
+
+ if (action == POST_RATE_CHANGE) {
+ mutex_lock(&st->lock);
+ ret = notifier_from_errno(admv1013_update_quad_filters(st));
+ mutex_unlock(&st->lock);
+ return ret;
+ }
+
+ return NOTIFY_OK;
+}
+
+#define _ADMV1013_EXT_INFO(_name, _shared, _ident) { \
+ .name = _name, \
+ .read = admv1013_read, \
+ .write = admv1013_write, \
+ .private = _ident, \
+ .shared = _shared, \
+}
+
+static const struct iio_chan_spec_ext_info admv1013_ext_info[] = {
+ _ADMV1013_EXT_INFO("i_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_I_CALIBPHASE),
+ _ADMV1013_EXT_INFO("q_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_Q_CALIBPHASE),
+ { },
+};
+
+#define ADMV1013_CHAN_PHASE(_channel, _channel2, _admv1013_ext_info) { \
+ .type = IIO_ALTVOLTAGE, \
+ .output = 0, \
+ .indexed = 1, \
+ .channel2 = _channel2, \
+ .channel = _channel, \
+ .differential = 1, \
+ .ext_info = _admv1013_ext_info, \
+ }
+
+#define ADMV1013_CHAN_CALIB(_channel, rf_comp) { \
+ .type = IIO_ALTVOLTAGE, \
+ .output = 0, \
+ .indexed = 1, \
+ .channel = _channel, \
+ .channel2 = IIO_MOD_##rf_comp, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_CALIBBIAS), \
+ }
+
+static const struct iio_chan_spec admv1013_channels[] = {
+ ADMV1013_CHAN_PHASE(0, 1, admv1013_ext_info),
+ ADMV1013_CHAN_CALIB(0, I),
+ ADMV1013_CHAN_CALIB(0, Q),
+ ADMV1013_CHAN_CALIB(1, I),
+ ADMV1013_CHAN_CALIB(1, Q),
+};
+
+static int admv1013_init(struct admv1013_state *st)
+{
+ int ret;
+ unsigned int data;
+ struct spi_device *spi = st->spi;
+
+ /* Perform a software reset */
+ ret = __admv1013_spi_update_bits(st, ADMV1013_REG_SPI_CONTROL,
+ ADMV1013_SPI_SOFT_RESET_MSK,
+ FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 1));
+ if (ret)
+ return ret;
+
+ ret = __admv1013_spi_update_bits(st, ADMV1013_REG_SPI_CONTROL,
+ ADMV1013_SPI_SOFT_RESET_MSK,
+ FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 0));
+ if (ret)
+ return ret;
+
+ ret = __admv1013_spi_read(st, ADMV1013_REG_SPI_CONTROL, &data);
+ if (ret)
+ return ret;
+
+ data = FIELD_GET(ADMV1013_CHIP_ID_MSK, data);
+ if (data != ADMV1013_CHIP_ID) {
+ dev_err(&spi->dev, "Invalid Chip ID.\n");
+ return -EINVAL;
+ }
+
+ ret = __admv1013_spi_write(st, ADMV1013_REG_VVA_TEMP_COMP, 0xE700);
+ if (ret)
+ return ret;
+
+ data = FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, st->quad_se_mode);
+
+ ret = __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
+ ADMV1013_QUAD_SE_MODE_MSK, data);
+ if (ret)
+ return ret;
+
+ ret = admv1013_update_mixer_vgate(st);
+ if (ret)
+ return ret;
+
+ ret = admv1013_update_quad_filters(st);
+ if (ret)
+ return ret;
+
+ return __admv1013_spi_update_bits(st, ADMV1013_REG_ENABLE,
+ ADMV1013_DET_EN_MSK |
+ ADMV1013_MIXER_IF_EN_MSK,
+ st->det_en |
+ st->input_mode);
+}
+
+static void admv1013_clk_disable(void *data)
+{
+ clk_disable_unprepare(data);
+}
+
+static void admv1013_reg_disable(void *data)
+{
+ regulator_disable(data);
+}
+
+static void admv1013_powerdown(void *data)
+{
+ unsigned int enable_reg, enable_reg_msk;
+
+ /* Disable all components in the Enable Register */
+ enable_reg_msk = ADMV1013_VGA_PD_MSK |
+ ADMV1013_MIXER_PD_MSK |
+ ADMV1013_QUAD_PD_MSK |
+ ADMV1013_BG_PD_MSK |
+ ADMV1013_MIXER_IF_EN_MSK |
+ ADMV1013_DET_EN_MSK;
+
+ enable_reg = FIELD_PREP(ADMV1013_VGA_PD_MSK, 1) |
+ FIELD_PREP(ADMV1013_MIXER_PD_MSK, 1) |
+ FIELD_PREP(ADMV1013_QUAD_PD_MSK, 7) |
+ FIELD_PREP(ADMV1013_BG_PD_MSK, 1) |
+ FIELD_PREP(ADMV1013_MIXER_IF_EN_MSK, 0) |
+ FIELD_PREP(ADMV1013_DET_EN_MSK, 0);
+
+ admv1013_spi_update_bits(data, ADMV1013_REG_ENABLE, enable_reg_msk, enable_reg);
+}
+
+static int admv1013_properties_parse(struct admv1013_state *st)
+{
+ int ret;
+ const char *str;
+ struct spi_device *spi = st->spi;
+
+ st->det_en = device_property_read_bool(&spi->dev, "adi,detector-enable");
+
+ ret = device_property_read_string(&spi->dev, "adi,input-mode", &str);
+ if (ret)
+ st->input_mode = ADMV1013_IQ_MODE;
+
+ if (!strcmp(str, "iq"))
+ st->input_mode = ADMV1013_IQ_MODE;
+ else if (!strcmp(str, "if"))
+ st->input_mode = ADMV1013_IF_MODE;
+ else
+ return -EINVAL;
+
+ ret = device_property_read_string(&spi->dev, "adi,quad-se-mode", &str);
+ if (ret)
+ st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
+
+ if (!strcmp(str, "diff"))
+ st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
+ else if (!strcmp(str, "se-pos"))
+ st->quad_se_mode = ADMV1013_SE_MODE_POS;
+ else if (!strcmp(str, "se-neg"))
+ st->quad_se_mode = ADMV1013_SE_MODE_NEG;
+ else
+ return -EINVAL;
+
+ st->reg = devm_regulator_get(&spi->dev, "vcm");
+ if (IS_ERR(st->reg))
+ return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
+ "failed to get the common-mode voltage\n");
+
+ st->clkin = devm_clk_get(&spi->dev, "lo_in");
+ if (IS_ERR(st->clkin))
+ return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
+ "failed to get the LO input clock\n");
+
+ return 0;
+}
+
+static int admv1013_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct admv1013_state *st;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ indio_dev->info = &admv1013_info;
+ indio_dev->name = "admv1013";
+ indio_dev->channels = admv1013_channels;
+ indio_dev->num_channels = ARRAY_SIZE(admv1013_channels);
+
+ st->spi = spi;
+
+ ret = admv1013_properties_parse(st);
+ if (ret)
+ return ret;
+
+ ret = regulator_enable(st->reg);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to enable specified Common-Mode Voltage!\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&spi->dev, admv1013_reg_disable,
+ st->reg);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(st->clkin);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, admv1013_clk_disable, st->clkin);
+ if (ret)
+ return ret;
+
+ st->nb.notifier_call = admv1013_freq_change;
+ ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb);
+ if (ret)
+ return ret;
+
+ mutex_init(&st->lock);
+
+ ret = admv1013_init(st);
+ if (ret) {
+ dev_err(&spi->dev, "admv1013 init failed\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&spi->dev, admv1013_powerdown, st);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id admv1013_id[] = {
+ { "admv1013", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, admv1013_id);
+
+static const struct of_device_id admv1013_of_match[] = {
+ { .compatible = "adi,admv1013" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, admv1013_of_match);
+
+static struct spi_driver admv1013_driver = {
+ .driver = {
+ .name = "admv1013",
+ .of_match_table = admv1013_of_match,
+ },
+ .probe = admv1013_probe,
+ .id_table = admv1013_id,
+};
+module_spi_driver(admv1013_driver);
+
+MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com");
+MODULE_DESCRIPTION("Analog Devices ADMV1013");
+MODULE_LICENSE("GPL v2");
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v7 2/3] dt-bindings: iio: frequency: add admv1013 doc
2021-12-21 11:22 [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013 Antoniu Miclaus
@ 2021-12-21 11:22 ` Antoniu Miclaus
2021-12-21 15:13 ` Rob Herring
2021-12-21 11:22 ` [PATCH v7 3/3] Documentation:ABI:testing:admv1013: add ABI docs Antoniu Miclaus
2021-12-23 11:54 ` [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013 Jonathan Cameron
2 siblings, 1 reply; 5+ messages in thread
From: Antoniu Miclaus @ 2021-12-21 11:22 UTC (permalink / raw)
To: jic23, robh+dt, linux-iio, devicetree, linux-kernel; +Cc: Antoniu Miclaus
Add device tree bindings for the ADMV1013 Upconverter.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
no changes in v7.
.../bindings/iio/frequency/adi,admv1013.yaml | 91 +++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
new file mode 100644
index 000000000000..23f1f3b55abb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1013 Microwave Upconverter
+
+maintainers:
+ - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+ Wideband, microwave upconverter optimized for point to point microwave
+ radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+ https://www.analog.com/en/products/admv1013.html
+
+properties:
+ compatible:
+ enum:
+ - adi,admv1013
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 1000000
+
+ clocks:
+ description:
+ Definition of the external clock.
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: lo_in
+
+ vcm-supply:
+ description:
+ Analog voltage regulator.
+
+ adi,detector-enable:
+ description:
+ Enable the Envelope Detector available at output pins VENV_P and
+ VENV_N. Disable to reduce power consumption.
+ type: boolean
+
+ adi,input-mode:
+ description:
+ Select the input mode.
+ iq - in-phase quadrature (I/Q) input
+ if - complex intermediate frequency (IF) input
+ enum: [iq, if]
+
+ adi,quad-se-mode:
+ description:
+ Switch the LO path from differential to single-ended operation.
+ se-neg - Single-Ended Mode, Negative Side Disabled.
+ se-pos - Single-Ended Mode, Positive Side Disabled.
+ diff - Differential Mode.
+ enum: [se-neg, se-pos, diff]
+
+ '#clock-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - vcm-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ admv1013@0{
+ compatible = "adi,admv1013";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ clocks = <&admv1013_lo>;
+ clock-names = "lo_in";
+ vcm-supply = <&vcm>;
+ adi,quad-se-mode = "diff";
+ adi,detector-enable;
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v7 2/3] dt-bindings: iio: frequency: add admv1013 doc
2021-12-21 11:22 ` [PATCH v7 2/3] dt-bindings: iio: frequency: add admv1013 doc Antoniu Miclaus
@ 2021-12-21 15:13 ` Rob Herring
0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2021-12-21 15:13 UTC (permalink / raw)
To: Antoniu Miclaus; +Cc: linux-kernel, jic23, devicetree, robh+dt, linux-iio
On Tue, 21 Dec 2021 13:22:05 +0200, Antoniu Miclaus wrote:
> Add device tree bindings for the ADMV1013 Upconverter.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> no changes in v7.
> .../bindings/iio/frequency/adi,admv1013.yaml | 91 +++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
>
Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v7 3/3] Documentation:ABI:testing:admv1013: add ABI docs
2021-12-21 11:22 [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013 Antoniu Miclaus
2021-12-21 11:22 ` [PATCH v7 2/3] dt-bindings: iio: frequency: add admv1013 doc Antoniu Miclaus
@ 2021-12-21 11:22 ` Antoniu Miclaus
2021-12-23 11:54 ` [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013 Jonathan Cameron
2 siblings, 0 replies; 5+ messages in thread
From: Antoniu Miclaus @ 2021-12-21 11:22 UTC (permalink / raw)
To: jic23, robh+dt, linux-iio, devicetree, linux-kernel; +Cc: Antoniu Miclaus
Add documentation for the use of the Local Oscillator Feedthrough Offset
calibration.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v7:
- rename `phase` -> `calibphase`
- specify that the phase values are unscaled
.../testing/sysfs-bus-iio-frequency-admv1013 | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013
new file mode 100644
index 000000000000..105bae9e2f5c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013
@@ -0,0 +1,38 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_i_calibphase
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write unscaled value for the Local Oscillatior path quadrature I phase shift.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_q_calibphase
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write unscaled value for the Local Oscillatior path quadrature Q phase shift.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibbias
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write value for the Local Oscillatior Feedthrough Offset Calibration I Positive
+ side.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibbias
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write value for the Local Oscillatior Feedthrough Offset Calibration Q Positive side.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage1_i_calibbias
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write raw value for the Local Oscillatior Feedthrough Offset Calibration I Negative
+ side.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage1_q_calibbias
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write raw value for the Local Oscillatior Feedthrough Offset Calibration Q Negative
+ side.
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013
2021-12-21 11:22 [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013 Antoniu Miclaus
2021-12-21 11:22 ` [PATCH v7 2/3] dt-bindings: iio: frequency: add admv1013 doc Antoniu Miclaus
2021-12-21 11:22 ` [PATCH v7 3/3] Documentation:ABI:testing:admv1013: add ABI docs Antoniu Miclaus
@ 2021-12-23 11:54 ` Jonathan Cameron
2 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2021-12-23 11:54 UTC (permalink / raw)
To: Antoniu Miclaus; +Cc: robh+dt, linux-iio, devicetree, linux-kernel
On Tue, 21 Dec 2021 13:22:04 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:
> The ADMV1013 is a wideband, microwave upconverter optimized
> for point to point microwave radio designs operating in the
> 24 GHz to 44 GHz radio frequency (RF) range.
>
> Datasheet:
> https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1013.pdf
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
Hi Antoniu,
A couple of observations inline but neither was significant enough
to require a respin or clearly beneficial to a degree where I'd just
fix them whilst applying.
Series applied and Rob's tag added to the dt-binding.
Pushed out as testing for 0-day to take a first look at it.
Where this makes it pre merge window depends on various people's
vacation plans so we'll see how that goes.
Thanks,
Jonathan
> +
> +static ssize_t admv1013_read(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct admv1013_state *st = iio_priv(indio_dev);
> + unsigned int data, addr;
> + int ret;
> +
> + switch ((u32)private) {
> + case ADMV1013_RFMOD_I_CALIBPHASE:
> + addr = ADMV1013_REG_LO_AMP_I;
> + break;
> + case ADMV1013_RFMOD_Q_CALIBPHASE:
> + addr = ADMV1013_REG_LO_AMP_Q;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + ret = admv1013_spi_read(st, addr, &data);
> + if (ret)
> + return ret;
> +
> + data = FIELD_GET(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
> +
> + return sysfs_emit(buf, "%u\n", data);
> +}
> +
> +static ssize_t admv1013_write(struct iio_dev *indio_dev,
> + uintptr_t private,
> + const struct iio_chan_spec *chan,
> + const char *buf, size_t len)
> +{
> + struct admv1013_state *st = iio_priv(indio_dev);
> + unsigned int data;
> + int ret;
> +
> + ret = kstrtou32(buf, 10, &data);
> + if (ret)
> + return ret;
> +
> + data = FIELD_PREP(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
> +
> + switch ((u32)private) {
> + case ADMV1013_RFMOD_I_CALIBPHASE:
As a possible follow up / cleanup you could just make private == ADMV1013_REG_LO_AMP_I/Q
and use it directly as the address.
The indirection here isn't adding anything that I can see.
> + ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_I,
> + ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
> + data);
> + if (ret)
> + return ret;
> + break;
> + case ADMV1013_RFMOD_Q_CALIBPHASE:
> + ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_Q,
> + ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
> + data);
> + if (ret)
> + return ret;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return ret ? ret : len;
> +}
> +
> +static int admv1013_update_quad_filters(struct admv1013_state *st)
> +{
> + unsigned int filt_raw;
> + u64 rate = clk_get_rate(st->clkin);
> +
> + if (rate >= (5400 * HZ_PER_MHZ) && rate <= (7000 * HZ_PER_MHZ))
> + filt_raw = 15;
> + else if (rate >= (5400 * HZ_PER_MHZ) && rate <= (8000 * HZ_PER_MHZ))
> + filt_raw = 10;
> + else if (rate >= (6600 * HZ_PER_MHZ) && rate <= (9200 * HZ_PER_MHZ))
> + filt_raw = 5;
> + else
> + filt_raw = 0;
> +
> + return __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
> + ADMV1013_QUAD_FILTERS_MSK,
> + FIELD_PREP(ADMV1013_QUAD_FILTERS_MSK, filt_raw));
> +}
> +
> +#define _ADMV1013_EXT_INFO(_name, _shared, _ident) { \
> + .name = _name, \
> + .read = admv1013_read, \
> + .write = admv1013_write, \
> + .private = _ident, \
> + .shared = _shared, \
> +}
> +
> +static const struct iio_chan_spec_ext_info admv1013_ext_info[] = {
> + _ADMV1013_EXT_INFO("i_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_I_CALIBPHASE),
> + _ADMV1013_EXT_INFO("q_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_Q_CALIBPHASE),
> + { },
> +};
> +
> +#define ADMV1013_CHAN_PHASE(_channel, _channel2, _admv1013_ext_info) { \
> + .type = IIO_ALTVOLTAGE, \
> + .output = 0, \
> + .indexed = 1, \
> + .channel2 = _channel2, \
> + .channel = _channel, \
> + .differential = 1, \
> + .ext_info = _admv1013_ext_info, \
Trivial but there is little purpose in passing _admv1013_ext_info into here
as it only ever takes once value. It would be cleaner to just hard
code it here.
> + }
> +
> +#define ADMV1013_CHAN_CALIB(_channel, rf_comp) { \
> + .type = IIO_ALTVOLTAGE, \
> + .output = 0, \
> + .indexed = 1, \
> + .channel = _channel, \
> + .channel2 = IIO_MOD_##rf_comp, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_CALIBBIAS), \
> + }
> +
> +static const struct iio_chan_spec admv1013_channels[] = {
> + ADMV1013_CHAN_PHASE(0, 1, admv1013_ext_info),
> + ADMV1013_CHAN_CALIB(0, I),
> + ADMV1013_CHAN_CALIB(0, Q),
> + ADMV1013_CHAN_CALIB(1, I),
> + ADMV1013_CHAN_CALIB(1, Q),
> +};
> +
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-12-23 11:49 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-21 11:22 [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013 Antoniu Miclaus
2021-12-21 11:22 ` [PATCH v7 2/3] dt-bindings: iio: frequency: add admv1013 doc Antoniu Miclaus
2021-12-21 15:13 ` Rob Herring
2021-12-21 11:22 ` [PATCH v7 3/3] Documentation:ABI:testing:admv1013: add ABI docs Antoniu Miclaus
2021-12-23 11:54 ` [PATCH v7 1/3] iio: frequency: admv1013: add support for ADMV1013 Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.