All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Maniak <lukasz.maniak@linux.intel.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>,
	"Łukasz Gieryk" <lukasz.gieryk@linux.intel.com>,
	"Lukasz Maniak" <lukasz.maniak@linux.intel.com>,
	"Keith Busch" <kbusch@kernel.org>,
	"Klaus Jensen" <its@irrelevant.dk>
Subject: [PATCH v3 05/15] hw/nvme: Add support for SR-IOV
Date: Tue, 21 Dec 2021 15:32:36 +0100	[thread overview]
Message-ID: <20211221143246.2052050-6-lukasz.maniak@linux.intel.com> (raw)
In-Reply-To: <20211221143246.2052050-1-lukasz.maniak@linux.intel.com>

This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.

Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.

Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.

NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.

NVMe subsystem is required for the use of SR-IOV.

Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
---
 hw/nvme/ctrl.c           | 84 ++++++++++++++++++++++++++++++++++++++--
 hw/nvme/nvme.h           |  3 +-
 include/hw/pci/pci_ids.h |  1 +
 3 files changed, 84 insertions(+), 4 deletions(-)

diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 5f573c417b..159635c1af 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -35,6 +35,7 @@
  *              mdts=<N[optional]>,vsl=<N[optional]>, \
  *              zoned.zasl=<N[optional]>, \
  *              zoned.auto_transition=<on|off[optional]>, \
+ *              sriov_max_vfs=<N[optional]> \
  *              subsys=<subsys_id>
  *      -device nvme-ns,drive=<drive_id>,bus=<bus_name>,nsid=<nsid>,\
  *              zoned=<true|false[optional]>, \
@@ -106,6 +107,12 @@
  *   transitioned to zone state closed for resource management purposes.
  *   Defaults to 'on'.
  *
+ * - `sriov_max_vfs`
+ *   Indicates the maximum number of PCIe virtual functions supported
+ *   by the controller. The default value is 0. Specifying a non-zero value
+ *   enables reporting of both SR-IOV and ARI capabilities by the NVMe device.
+ *   Virtual function controllers will not report SR-IOV capability.
+ *
  * nvme namespace device parameters
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  * - `shared`
@@ -160,6 +167,7 @@
 #include "sysemu/block-backend.h"
 #include "sysemu/hostmem.h"
 #include "hw/pci/msix.h"
+#include "hw/pci/pcie_sriov.h"
 #include "migration/vmstate.h"
 
 #include "nvme.h"
@@ -175,6 +183,9 @@
 #define NVME_TEMPERATURE_CRITICAL 0x175
 #define NVME_NUM_FW_SLOTS 1
 #define NVME_DEFAULT_MAX_ZA_SIZE (128 * KiB)
+#define NVME_MAX_VFS 127
+#define NVME_VF_OFFSET 0x1
+#define NVME_VF_STRIDE 1
 
 #define NVME_GUEST_ERR(trace, fmt, ...) \
     do { \
@@ -5588,6 +5599,10 @@ static void nvme_ctrl_reset(NvmeCtrl *n)
         g_free(event);
     }
 
+    if (!pci_is_vf(&n->parent_obj) && n->params.sriov_max_vfs) {
+        pcie_sriov_pf_disable_vfs(&n->parent_obj);
+    }
+
     n->aer_queued = 0;
     n->outstanding_aers = 0;
     n->qs_created = false;
@@ -6269,6 +6284,29 @@ static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
         error_setg(errp, "vsl must be non-zero");
         return;
     }
+
+    if (params->sriov_max_vfs) {
+        if (!n->subsys) {
+            error_setg(errp, "subsystem is required for the use of SR-IOV");
+            return;
+        }
+
+        if (params->sriov_max_vfs > NVME_MAX_VFS) {
+            error_setg(errp, "sriov_max_vfs must be between 0 and %d",
+                       NVME_MAX_VFS);
+            return;
+        }
+
+        if (params->cmb_size_mb) {
+            error_setg(errp, "CMB is not supported with SR-IOV");
+            return;
+        }
+
+        if (n->pmr.dev) {
+            error_setg(errp, "PMR is not supported with SR-IOV");
+            return;
+        }
+    }
 }
 
 static void nvme_init_state(NvmeCtrl *n)
@@ -6326,6 +6364,20 @@ static void nvme_init_pmr(NvmeCtrl *n, PCIDevice *pci_dev)
     memory_region_set_enabled(&n->pmr.dev->mr, false);
 }
 
+static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset,
+                            uint64_t bar_size)
+{
+    uint16_t vf_dev_id = n->params.use_intel_id ?
+                         PCI_DEVICE_ID_INTEL_NVME : PCI_DEVICE_ID_REDHAT_NVME;
+
+    pcie_sriov_pf_init(pci_dev, offset, "nvme", vf_dev_id,
+                       n->params.sriov_max_vfs, n->params.sriov_max_vfs,
+                       NVME_VF_OFFSET, NVME_VF_STRIDE);
+
+    pcie_sriov_pf_init_vf_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+                              PCI_BASE_ADDRESS_MEM_TYPE_64, bar_size);
+}
+
 static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
 {
     uint8_t *pci_conf = pci_dev->config;
@@ -6340,7 +6392,7 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
 
     if (n->params.use_intel_id) {
         pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
-        pci_config_set_device_id(pci_conf, 0x5845);
+        pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_NVME);
     } else {
         pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_REDHAT);
         pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_REDHAT_NVME);
@@ -6348,6 +6400,9 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
 
     pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_EXPRESS);
     pcie_endpoint_cap_init(pci_dev, 0x80);
+    if (n->params.sriov_max_vfs) {
+        pcie_ari_init(pci_dev, 0x100, 1);
+    }
 
     bar_size = QEMU_ALIGN_UP(n->reg_size, 4 * KiB);
     msix_table_offset = bar_size;
@@ -6366,8 +6421,12 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
                           n->reg_size);
     memory_region_add_subregion(&n->bar0, 0, &n->iomem);
 
-    pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
-                     PCI_BASE_ADDRESS_MEM_TYPE_64, &n->bar0);
+    if (pci_is_vf(pci_dev)) {
+        pcie_sriov_vf_register_bar(pci_dev, 0, &n->bar0);
+    } else {
+        pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+                         PCI_BASE_ADDRESS_MEM_TYPE_64, &n->bar0);
+    }
     ret = msix_init(pci_dev, n->params.msix_qsize,
                     &n->bar0, 0, msix_table_offset,
                     &n->bar0, 0, msix_pba_offset, 0, &err);
@@ -6388,6 +6447,10 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
         nvme_init_pmr(n, pci_dev);
     }
 
+    if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
+        nvme_init_sriov(n, pci_dev, 0x120, bar_size);
+    }
+
     return 0;
 }
 
@@ -6537,6 +6600,15 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
     NvmeCtrl *n = NVME(pci_dev);
     NvmeNamespace *ns;
     Error *local_err = NULL;
+    NvmeCtrl *pn = NVME(pcie_sriov_get_pf(pci_dev));
+
+    if (pci_is_vf(pci_dev)) {
+        /* VFs derive settings from the parent. PF's lifespan exceeds
+         * that of VF's, so it's safe to share params.serial.
+         */
+        memcpy(&n->params, &pn->params, sizeof(NvmeParams));
+        n->subsys = pn->subsys;
+    }
 
     nvme_check_constraints(n, &local_err);
     if (local_err) {
@@ -6601,6 +6673,11 @@ static void nvme_exit(PCIDevice *pci_dev)
     if (n->pmr.dev) {
         host_memory_backend_set_mapped(n->pmr.dev, false);
     }
+
+    if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
+        pcie_sriov_pf_exit(pci_dev);
+    }
+
     msix_uninit(pci_dev, &n->bar0, &n->bar0);
     memory_region_del_subregion(&n->bar0, &n->iomem);
 }
@@ -6625,6 +6702,7 @@ static Property nvme_props[] = {
     DEFINE_PROP_UINT8("zoned.zasl", NvmeCtrl, params.zasl, 0),
     DEFINE_PROP_BOOL("zoned.auto_transition", NvmeCtrl,
                      params.auto_transition_zones, true),
+    DEFINE_PROP_UINT8("sriov_max_vfs", NvmeCtrl, params.sriov_max_vfs, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 83ffabade4..4c8af34b28 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -24,7 +24,7 @@
 
 #include "block/nvme.h"
 
-#define NVME_MAX_CONTROLLERS 32
+#define NVME_MAX_CONTROLLERS 256
 #define NVME_MAX_NAMESPACES  256
 #define NVME_EUI64_DEFAULT ((uint64_t)0x5254000000000000)
 
@@ -391,6 +391,7 @@ typedef struct NvmeParams {
     uint8_t  zasl;
     bool     auto_transition_zones;
     bool     legacy_cmb;
+    uint8_t  sriov_max_vfs;
 } NvmeParams;
 
 typedef struct NvmeCtrl {
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 11abe22d46..992426768e 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -237,6 +237,7 @@
 #define PCI_DEVICE_ID_INTEL_82801BA_11   0x244e
 #define PCI_DEVICE_ID_INTEL_82801D       0x24CD
 #define PCI_DEVICE_ID_INTEL_ESB_9        0x25ab
+#define PCI_DEVICE_ID_INTEL_NVME         0x5845
 #define PCI_DEVICE_ID_INTEL_82371SB_0    0x7000
 #define PCI_DEVICE_ID_INTEL_82371SB_1    0x7010
 #define PCI_DEVICE_ID_INTEL_82371SB_2    0x7020
-- 
2.25.1



  parent reply	other threads:[~2021-12-21 14:36 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-21 14:32 [PATCH v3 00/15] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 01/15] pcie: Add support for Single Root I/O Virtualization (SR/IOV) Lukasz Maniak
2022-01-06 10:16   ` Michael S. Tsirkin
2022-01-26 13:23     ` Łukasz Gieryk
2022-01-26 13:32       ` Knut Omang
2021-12-21 14:32 ` [PATCH v3 02/15] pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 03/15] pcie: Add a helper to the SR/IOV API Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 04/15] pcie: Add 1.2 version token for the Power Management Capability Lukasz Maniak
2021-12-21 14:32 ` Lukasz Maniak [this message]
2021-12-21 14:32 ` [PATCH v3 06/15] hw/nvme: Add support for Primary Controller Capabilities Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 07/15] hw/nvme: Add support for Secondary Controller List Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 08/15] hw/nvme: Implement the Function Level Reset Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 09/15] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 10/15] hw/nvme: Remove reg_size variable and update BAR0 size calculation Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 11/15] hw/nvme: Calculate BAR attributes in a function Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 12/15] hw/nvme: Initialize capability structures for primary/secondary controllers Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 13/15] hw/nvme: Add support for the Virtualization Management command Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 14/15] docs: Add documentation for SR-IOV and Virtualization Enhancements Lukasz Maniak
2021-12-21 14:32 ` [PATCH v3 15/15] hw/nvme: Update the initalization place for the AER queue Lukasz Maniak
2022-01-26  8:58 ` [PATCH v3 00/15] hw/nvme: SR-IOV with Virtualization Enhancements Klaus Jensen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211221143246.2052050-6-lukasz.maniak@linux.intel.com \
    --to=lukasz.maniak@linux.intel.com \
    --cc=its@irrelevant.dk \
    --cc=kbusch@kernel.org \
    --cc=lukasz.gieryk@linux.intel.com \
    --cc=mst@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.