From: Jammy Huang <jammy_huang@aspeedtech.com> To: <hverkuil-cisco@xs4all.nl>, <sakari.ailus@linux.intel.com>, <gregkh@linuxfoundation.org>, <eajames@linux.ibm.com>, <mchehab@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>, <linux-media@vger.kernel.org>, <openbmc@lists.ozlabs.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v8 4/4] media: aspeed: Extend debug message Date: Fri, 24 Dec 2021 09:27:38 +0800 [thread overview] Message-ID: <20211224012738.1551-5-jammy_huang@aspeedtech.com> (raw) In-Reply-To: <20211224012738.1551-1-jammy_huang@aspeedtech.com> updated as below: Capture: Mode : Direct fetch VGA bpp mode : 32 Signal : lock Width : 1920 Height : 1080 FRC : 0 Compression: Format : JPEG Subsampling : 444 Quality : 4 Performance: Frame# : 4 Frame Duration(ms) : Now : 22 Min : 21 Max : 22 FPS : 45 Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> --- v8: - no update v7: - update debugfs message. Aspeed-jpeg's compression parameters only shown if it's aspeed jpeg now v6: - no update v5: - no update v4: - update debugfs log v3: - no update v2: - update commit message --- drivers/media/platform/aspeed-video.c | 35 +++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c index c0cfcf98659d..b388bc56ce81 100644 --- a/drivers/media/platform/aspeed-video.c +++ b/drivers/media/platform/aspeed-video.c @@ -1835,10 +1835,29 @@ static const struct vb2_ops aspeed_video_vb2_ops = { static int aspeed_video_debugfs_show(struct seq_file *s, void *data) { struct aspeed_video *v = s->private; + u32 val08; seq_puts(s, "\n"); seq_puts(s, "Capture:\n"); + val08 = aspeed_video_read(v, VE_CTRL); + if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) { + seq_printf(s, " %-20s:\tDirect fetch\n", "Mode"); + seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode", + FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32"); + } else { + seq_printf(s, " %-20s:\tSync\n", "Mode"); + seq_printf(s, " %-20s:\t%s\n", "Video source", + FIELD_GET(VE_CTRL_SOURCE, val08) ? + "external" : "internal"); + seq_printf(s, " %-20s:\t%s\n", "DE source", + FIELD_GET(VE_CTRL_INT_DE, val08) ? + "internal" : "external"); + seq_printf(s, " %-20s:\t%s\n", "Cursor overlay", + FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ? + "Without" : "With"); + } + seq_printf(s, " %-20s:\t%s\n", "Signal", v->v4l2_input_status ? "Unlock" : "Lock"); seq_printf(s, " %-20s:\t%d\n", "Width", v->pix_fmt.width); @@ -1847,6 +1866,22 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data) seq_puts(s, "\n"); + seq_puts(s, "Compression:\n"); + seq_printf(s, " %-20s:\t%s\n", "Format", format_str[v->format]); + seq_printf(s, " %-20s:\t%s\n", "Subsampling", + v->yuv420 ? "420" : "444"); + seq_printf(s, " %-20s:\t%d\n", "Quality", v->jpeg_quality); + if (v->format == VIDEO_FMT_ASPEED) { + seq_printf(s, " %-20s:\t%s\n", "HQ Mode", + v->hq_mode ? "on" : "off"); + seq_printf(s, " %-20s:\t%d\n", "HQ Quality", + v->hq_mode ? v->jpeg_hq_quality : 0); + seq_printf(s, " %-20s:\t%s\n", "Coding Scheme", + compress_scheme_str[v->compression_scheme]); + } + + seq_puts(s, "\n"); + seq_puts(s, "Performance:\n"); seq_printf(s, " %-20s:\t%d\n", "Frame#", v->sequence); seq_printf(s, " %-20s:\n", "Frame Duration(ms)"); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jammy Huang <jammy_huang@aspeedtech.com> To: <hverkuil-cisco@xs4all.nl>, <sakari.ailus@linux.intel.com>, <gregkh@linuxfoundation.org>, <eajames@linux.ibm.com>, <mchehab@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>, <linux-media@vger.kernel.org>, <openbmc@lists.ozlabs.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v8 4/4] media: aspeed: Extend debug message Date: Fri, 24 Dec 2021 09:27:38 +0800 [thread overview] Message-ID: <20211224012738.1551-5-jammy_huang@aspeedtech.com> (raw) In-Reply-To: <20211224012738.1551-1-jammy_huang@aspeedtech.com> updated as below: Capture: Mode : Direct fetch VGA bpp mode : 32 Signal : lock Width : 1920 Height : 1080 FRC : 0 Compression: Format : JPEG Subsampling : 444 Quality : 4 Performance: Frame# : 4 Frame Duration(ms) : Now : 22 Min : 21 Max : 22 FPS : 45 Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> --- v8: - no update v7: - update debugfs message. Aspeed-jpeg's compression parameters only shown if it's aspeed jpeg now v6: - no update v5: - no update v4: - update debugfs log v3: - no update v2: - update commit message --- drivers/media/platform/aspeed-video.c | 35 +++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c index c0cfcf98659d..b388bc56ce81 100644 --- a/drivers/media/platform/aspeed-video.c +++ b/drivers/media/platform/aspeed-video.c @@ -1835,10 +1835,29 @@ static const struct vb2_ops aspeed_video_vb2_ops = { static int aspeed_video_debugfs_show(struct seq_file *s, void *data) { struct aspeed_video *v = s->private; + u32 val08; seq_puts(s, "\n"); seq_puts(s, "Capture:\n"); + val08 = aspeed_video_read(v, VE_CTRL); + if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) { + seq_printf(s, " %-20s:\tDirect fetch\n", "Mode"); + seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode", + FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32"); + } else { + seq_printf(s, " %-20s:\tSync\n", "Mode"); + seq_printf(s, " %-20s:\t%s\n", "Video source", + FIELD_GET(VE_CTRL_SOURCE, val08) ? + "external" : "internal"); + seq_printf(s, " %-20s:\t%s\n", "DE source", + FIELD_GET(VE_CTRL_INT_DE, val08) ? + "internal" : "external"); + seq_printf(s, " %-20s:\t%s\n", "Cursor overlay", + FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ? + "Without" : "With"); + } + seq_printf(s, " %-20s:\t%s\n", "Signal", v->v4l2_input_status ? "Unlock" : "Lock"); seq_printf(s, " %-20s:\t%d\n", "Width", v->pix_fmt.width); @@ -1847,6 +1866,22 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data) seq_puts(s, "\n"); + seq_puts(s, "Compression:\n"); + seq_printf(s, " %-20s:\t%s\n", "Format", format_str[v->format]); + seq_printf(s, " %-20s:\t%s\n", "Subsampling", + v->yuv420 ? "420" : "444"); + seq_printf(s, " %-20s:\t%d\n", "Quality", v->jpeg_quality); + if (v->format == VIDEO_FMT_ASPEED) { + seq_printf(s, " %-20s:\t%s\n", "HQ Mode", + v->hq_mode ? "on" : "off"); + seq_printf(s, " %-20s:\t%d\n", "HQ Quality", + v->hq_mode ? v->jpeg_hq_quality : 0); + seq_printf(s, " %-20s:\t%s\n", "Coding Scheme", + compress_scheme_str[v->compression_scheme]); + } + + seq_puts(s, "\n"); + seq_puts(s, "Performance:\n"); seq_printf(s, " %-20s:\t%d\n", "Frame#", v->sequence); seq_printf(s, " %-20s:\n", "Frame Duration(ms)"); -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-12-24 1:29 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-24 1:27 [PATCH v8 0/4] add aspeed-jpeg support for aspeed-video Jammy Huang 2021-12-24 1:27 ` Jammy Huang 2021-12-24 1:27 ` [PATCH v8 1/4] media: v4l: Add definition for the Aspeed JPEG format Jammy Huang 2021-12-24 1:27 ` Jammy Huang 2022-01-14 8:11 ` Hans Verkuil 2022-01-14 8:11 ` Hans Verkuil 2022-01-17 1:59 ` Jammy Huang 2022-01-17 1:59 ` Jammy Huang 2022-01-17 2:24 ` Joel Stanley 2022-01-17 2:24 ` Joel Stanley 2022-01-17 2:24 ` Joel Stanley 2022-01-17 7:18 ` Jammy Huang 2022-01-17 7:18 ` Jammy Huang 2022-01-17 7:18 ` Jammy Huang 2022-01-17 9:28 ` Hans Verkuil 2022-01-17 9:28 ` Hans Verkuil 2022-01-17 9:28 ` Hans Verkuil 2022-01-17 9:37 ` Jammy Huang 2022-01-17 9:37 ` Jammy Huang 2022-01-17 9:37 ` Jammy Huang 2021-12-24 1:27 ` [PATCH v8 2/4] media: v4l2-ctrls: Reserve controls for ASPEED Jammy Huang 2021-12-24 1:27 ` Jammy Huang 2021-12-24 1:27 ` [PATCH v8 3/4] media: aspeed: Support aspeed mode to reduce compressed data Jammy Huang 2021-12-24 1:27 ` Jammy Huang 2021-12-24 1:27 ` Jammy Huang [this message] 2021-12-24 1:27 ` [PATCH v8 4/4] media: aspeed: Extend debug message Jammy Huang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211224012738.1551-5-jammy_huang@aspeedtech.com \ --to=jammy_huang@aspeedtech.com \ --cc=andrew@aj.id.au \ --cc=eajames@linux.ibm.com \ --cc=gregkh@linuxfoundation.org \ --cc=hverkuil-cisco@xs4all.nl \ --cc=joel@jms.id.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=openbmc@lists.ozlabs.org \ --cc=sakari.ailus@linux.intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.