* [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode
@ 2021-12-27 16:26 Paul Menzel
2021-12-27 16:26 ` [PATCH v2 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE Paul Menzel
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Paul Menzel @ 2021-12-27 16:26 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: Paul Menzel, linux-pci, linux-kernel
The ASUS F2A85-M PRO with the fusion controller hub (FCH) AMD A85
(Hudson D4) has the SATA controller below.
$ lspci -s 00:11.0
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7801] (rev 40)
Add the ID for it, when in AHCI mode.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
include/linux/pci_ids.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 011f2f1ea5bb..fe944b44858a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -602,6 +602,7 @@
#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081
#define PCI_DEVICE_ID_AMD_LX_AES 0x2082
#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800
+#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_AHCI 0x7801
#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b
#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c
#define PCI_DEVICE_ID_AMD_KERNCZ_SMBUS 0x790b
--
2.30.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 2021-12-27 16:26 [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode Paul Menzel @ 2021-12-27 16:26 ` Paul Menzel 2021-12-27 16:26 ` [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()` Paul Menzel 2021-12-29 20:00 ` [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode Bjorn Helgaas 2 siblings, 0 replies; 5+ messages in thread From: Paul Menzel @ 2021-12-27 16:26 UTC (permalink / raw) To: Damien Le Moal; +Cc: Paul Menzel, linux-ide, linux-kernel Use the defined macro from `include/linux/pci_ids.h`. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> --- drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1e1167e725a4..6a2432e4adda 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -436,7 +436,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { .class_mask = 0xffffff, board_ahci_al }, /* AMD */ - { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */ + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE), board_ahci }, { PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */ { PCI_VDEVICE(AMD, 0x7901), board_ahci_mobile }, /* AMD Green Sardine */ /* AMD is using RAID class only for ahci controllers */ -- 2.30.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()` 2021-12-27 16:26 [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode Paul Menzel 2021-12-27 16:26 ` [PATCH v2 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE Paul Menzel @ 2021-12-27 16:26 ` Paul Menzel 2021-12-27 16:32 ` Paul Menzel 2021-12-29 20:00 ` [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode Bjorn Helgaas 2 siblings, 1 reply; 5+ messages in thread From: Paul Menzel @ 2021-12-27 16:26 UTC (permalink / raw) To: Damien Le Moal Cc: Paul Menzel, Dmitry Torokhov, Guenter Roeck, linux-ide, linux-kernel Since the first commit 1da177e4c3 (Linux-2.6.12-rc2) in the Linux git repository, `sata_link_resume()` contains a 200 ms delay with the comment below. > /* > * Some PHYs react badly if SStatus is pounded > * immediately after resuming. Delay 200ms before > * debouncing. > */ A lot of PHYs do not have that problem though, so delaying 200 ms increases the boot time by 30 percent unnecessarily for a lot of systems, making “instant booting” quite hard. As it’s unknown for what PHY the delay was added, create a new board `board_ahci_nodbdelay` with the link flag `ATA_LFLAG_NO_DB_DELAY,`, and, for now, configure the AMD A85 FCH (Hudson D4) to use it. On the ASUS F2A85-M PRO it reduces the Linux kernel boot time by the expected 200 ms from 787 ms to 585 ms. Tested on ASUS F2A85-M PRO: Without patch, i. e., with 200 ms debounce delay: […] [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.15-671-g7b043ef855 12/27/2021 […] [ 0.404885] ahci 0000:00:11.0: version 3.0 [ 0.405466] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode [ 0.405470] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio [ 0.408036] scsi host0: ahci [ 0.408537] scsi host1: ahci [ 0.408932] scsi host2: ahci [ 0.409444] scsi host3: ahci [ 0.409841] scsi host4: ahci [ 0.410266] scsi host5: ahci [ 0.410661] scsi host6: ahci [ 0.411052] scsi host7: ahci [ 0.411284] ata1: DUMMY [ 0.411286] ata2: DUMMY [ 0.411286] ata3: DUMMY [ 0.411287] ata4: DUMMY [ 0.411288] ata5: DUMMY [ 0.411289] ata6: DUMMY [ 0.411291] ata7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19 [ 0.411292] ata8: DUMMY […] [ 0.422362] Key type encrypted registered [ 0.424903] PM: Magic number: 1:28:636 [ 0.723979] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.724268] ata7.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 [ 0.724271] ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) [ 0.725537] ata7.00: configured for UDMA/133 [ 0.725898] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 [ 0.726428] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 0.726442] sd 6:0:0:0: [sda] Write Protect is off [ 0.726446] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.726464] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.727985] sda: sda1 sda2 sda3 [ 0.728588] sd 6:0:0:0: [sda] Attached SCSI disk [ 0.738495] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. […] [ 0.786812] Run /sbin/init as init process With patch, i. e., skipping the debounce delay saves 200 ms from the boot as expected. […] [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.15-671-g7b043ef855 12/27/2021 […] [ 0.407372] ahci 0000:00:11.0: version 3.0 [ 0.407909] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode [ 0.407913] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio [ 0.410520] scsi host0: ahci [ 0.411017] scsi host1: ahci [ 0.411418] scsi host2: ahci [ 0.411810] scsi host3: ahci [ 0.412225] scsi host4: ahci [ 0.412614] scsi host5: ahci [ 0.413005] scsi host6: ahci [ 0.413488] scsi host7: ahci [ 0.413713] ata1: DUMMY [ 0.413715] ata2: DUMMY [ 0.413716] ata3: DUMMY [ 0.413716] ata4: DUMMY [ 0.413717] ata5: DUMMY [ 0.413718] ata6: DUMMY [ 0.413720] ata7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19 [ 0.413722] ata8: DUMMY […] [ 0.425414] Key type encrypted registered [ 0.427873] PM: Magic number: 1:234:838 [ 0.522131] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.522415] ata7.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 [ 0.522418] ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) [ 0.523636] ata7.00: configured for UDMA/133 [ 0.523993] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 [ 0.524497] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 0.524511] sd 6:0:0:0: [sda] Write Protect is off [ 0.524515] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.524534] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.525953] sda: sda1 sda2 sda3 [ 0.526541] sd 6:0:0:0: [sda] Attached SCSI disk [ 0.536245] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. […] [ 0.585327] Run /sbin/init as init process Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Guenter Roeck <groeck@chromium.org> --- drivers/ata/ahci.c | 9 +++++++++ 1 file changed, 9 insertions(+) v2: Add new board to enum `board_ids`. Add the two Chromium OS developers Dmitry and Guenter to Cc, as to my knowledge Chromium/Chrome OS also tries to boot very fast, and the Chromium project has some CI infrastructure. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6a2432e4adda..4f3e0603864d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -51,6 +51,7 @@ enum board_ids { board_ahci, board_ahci_ign_iferr, board_ahci_mobile, + board_ahci_nodbdelay, board_ahci_nomsi, board_ahci_noncq, board_ahci_nosntf, @@ -141,6 +142,13 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + [board_ahci_nodbdelay] = { + .flags = AHCI_FLAG_COMMON, + .link_flags = ATA_LFLAG_NO_DB_DELAY, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, [board_ahci_nomsi] = { AHCI_HFLAGS (AHCI_HFLAG_NO_MSI), .flags = AHCI_FLAG_COMMON, @@ -437,6 +445,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { board_ahci_al }, /* AMD */ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE), board_ahci }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_AHCI), board_ahci_nodbdelay }, { PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */ { PCI_VDEVICE(AMD, 0x7901), board_ahci_mobile }, /* AMD Green Sardine */ /* AMD is using RAID class only for ahci controllers */ -- 2.30.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()` 2021-12-27 16:26 ` [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()` Paul Menzel @ 2021-12-27 16:32 ` Paul Menzel 0 siblings, 0 replies; 5+ messages in thread From: Paul Menzel @ 2021-12-27 16:32 UTC (permalink / raw) To: Damien Le Moal; +Cc: Dmitry Torokhov, Guenter Roeck, linux-ide, linux-kernel Dear Linux folks, Am 27.12.21 um 17:26 schrieb Paul Menzel: > Since the first commit 1da177e4c3 (Linux-2.6.12-rc2) in the Linux git > repository, `sata_link_resume()` contains a 200 ms delay with the comment > below. > >> /* >> * Some PHYs react badly if SStatus is pounded >> * immediately after resuming. Delay 200ms before >> * debouncing. >> */ > > A lot of PHYs do not have that problem though, so delaying 200 ms increases > the boot time by 30 percent unnecessarily for a lot of systems, making > “instant booting” quite hard. > > As it’s unknown for what PHY the delay was added, create a new board > `board_ahci_nodbdelay` with the link flag `ATA_LFLAG_NO_DB_DELAY,`, and, > for now, configure the AMD A85 FCH (Hudson D4) to use it. > > On the ASUS F2A85-M PRO it reduces the Linux kernel boot time by the > expected 200 ms from 787 ms to 585 ms. > > Tested on ASUS F2A85-M PRO: > > Without patch, i. e., with 200 ms debounce delay: > > […] > [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.15-671-g7b043ef855 12/27/2021 > […] > [ 0.404885] ahci 0000:00:11.0: version 3.0 > [ 0.405466] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode > [ 0.405470] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio > [ 0.408036] scsi host0: ahci > [ 0.408537] scsi host1: ahci > [ 0.408932] scsi host2: ahci > [ 0.409444] scsi host3: ahci > [ 0.409841] scsi host4: ahci > [ 0.410266] scsi host5: ahci > [ 0.410661] scsi host6: ahci > [ 0.411052] scsi host7: ahci > [ 0.411284] ata1: DUMMY > [ 0.411286] ata2: DUMMY > [ 0.411286] ata3: DUMMY > [ 0.411287] ata4: DUMMY > [ 0.411288] ata5: DUMMY > [ 0.411289] ata6: DUMMY > [ 0.411291] ata7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19 > [ 0.411292] ata8: DUMMY > […] > [ 0.422362] Key type encrypted registered > [ 0.424903] PM: Magic number: 1:28:636 > [ 0.723979] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 0.724268] ata7.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 > [ 0.724271] ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) > [ 0.725537] ata7.00: configured for UDMA/133 > [ 0.725898] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 > [ 0.726428] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) > [ 0.726442] sd 6:0:0:0: [sda] Write Protect is off > [ 0.726446] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.726464] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 0.727985] sda: sda1 sda2 sda3 > [ 0.728588] sd 6:0:0:0: [sda] Attached SCSI disk > [ 0.738495] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. > […] > [ 0.786812] Run /sbin/init as init process > > With patch, i. e., skipping the debounce delay saves 200 ms from the boot > as expected. > > […] > [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.15-671-g7b043ef855 12/27/2021 > […] > [ 0.407372] ahci 0000:00:11.0: version 3.0 > [ 0.407909] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode > [ 0.407913] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio > [ 0.410520] scsi host0: ahci > [ 0.411017] scsi host1: ahci > [ 0.411418] scsi host2: ahci > [ 0.411810] scsi host3: ahci > [ 0.412225] scsi host4: ahci > [ 0.412614] scsi host5: ahci > [ 0.413005] scsi host6: ahci > [ 0.413488] scsi host7: ahci > [ 0.413713] ata1: DUMMY > [ 0.413715] ata2: DUMMY > [ 0.413716] ata3: DUMMY > [ 0.413716] ata4: DUMMY > [ 0.413717] ata5: DUMMY > [ 0.413718] ata6: DUMMY > [ 0.413720] ata7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19 > [ 0.413722] ata8: DUMMY > […] > [ 0.425414] Key type encrypted registered > [ 0.427873] PM: Magic number: 1:234:838 > [ 0.522131] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 0.522415] ata7.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 > [ 0.522418] ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) > [ 0.523636] ata7.00: configured for UDMA/133 > [ 0.523993] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 > [ 0.524497] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) > [ 0.524511] sd 6:0:0:0: [sda] Write Protect is off > [ 0.524515] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.524534] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 0.525953] sda: sda1 sda2 sda3 > [ 0.526541] sd 6:0:0:0: [sda] Attached SCSI disk > [ 0.536245] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. > […] > [ 0.585327] Run /sbin/init as init process > > Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Guenter Roeck <groeck@chromium.org> > > --- > drivers/ata/ahci.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > v2: Add new board to enum `board_ids`. > > Add the two Chromium OS developers Dmitry and Guenter to Cc, as to my > knowledge Chromium/Chrome OS also tries to boot very fast, and the Chromium > project has some CI infrastructure. By the way, I do not even know what the PHY actually is, and how it can be checked. Maybe the original commit message for the 200 ms delay mentions the PHY, but I have no idea how to access that history. If the delay would be removed unconditionally, a module parameter would probably be a good idea, so people with bad PHY’s have an easy way to get it booting again. Kind regards, Paul > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > index 6a2432e4adda..4f3e0603864d 100644 > --- a/drivers/ata/ahci.c > +++ b/drivers/ata/ahci.c > @@ -51,6 +51,7 @@ enum board_ids { > board_ahci, > board_ahci_ign_iferr, > board_ahci_mobile, > + board_ahci_nodbdelay, > board_ahci_nomsi, > board_ahci_noncq, > board_ahci_nosntf, > @@ -141,6 +142,13 @@ static const struct ata_port_info ahci_port_info[] = { > .udma_mask = ATA_UDMA6, > .port_ops = &ahci_ops, > }, > + [board_ahci_nodbdelay] = { > + .flags = AHCI_FLAG_COMMON, > + .link_flags = ATA_LFLAG_NO_DB_DELAY, > + .pio_mask = ATA_PIO4, > + .udma_mask = ATA_UDMA6, > + .port_ops = &ahci_ops, > + }, > [board_ahci_nomsi] = { > AHCI_HFLAGS (AHCI_HFLAG_NO_MSI), > .flags = AHCI_FLAG_COMMON, > @@ -437,6 +445,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { > board_ahci_al }, > /* AMD */ > { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE), board_ahci }, > + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_AHCI), board_ahci_nodbdelay }, > { PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */ > { PCI_VDEVICE(AMD, 0x7901), board_ahci_mobile }, /* AMD Green Sardine */ > /* AMD is using RAID class only for ahci controllers */ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode 2021-12-27 16:26 [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode Paul Menzel 2021-12-27 16:26 ` [PATCH v2 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE Paul Menzel 2021-12-27 16:26 ` [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()` Paul Menzel @ 2021-12-29 20:00 ` Bjorn Helgaas 2 siblings, 0 replies; 5+ messages in thread From: Bjorn Helgaas @ 2021-12-29 20:00 UTC (permalink / raw) To: Paul Menzel; +Cc: Bjorn Helgaas, linux-pci, linux-kernel On Mon, Dec 27, 2021 at 05:26:56PM +0100, Paul Menzel wrote: > The ASUS F2A85-M PRO with the fusion controller hub (FCH) AMD A85 > (Hudson D4) has the SATA controller below. > > $ lspci -s 00:11.0 > 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7801] (rev 40) > > Add the ID for it, when in AHCI mode. > > Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> > --- > include/linux/pci_ids.h | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h > index 011f2f1ea5bb..fe944b44858a 100644 > --- a/include/linux/pci_ids.h > +++ b/include/linux/pci_ids.h > @@ -602,6 +602,7 @@ > #define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081 > #define PCI_DEVICE_ID_AMD_LX_AES 0x2082 > #define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800 > +#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_AHCI 0x7801 > #define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b > #define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c > #define PCI_DEVICE_ID_AMD_KERNCZ_SMBUS 0x790b > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-12-29 20:00 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-12-27 16:26 [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode Paul Menzel 2021-12-27 16:26 ` [PATCH v2 2/3] ahci: Use macro PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE Paul Menzel 2021-12-27 16:26 ` [PATCH v2 3/3] ahci: AMD A85 FCH (Hudson D4): Skip 200 ms debounce delay in `sata_link_resume()` Paul Menzel 2021-12-27 16:32 ` Paul Menzel 2021-12-29 20:00 ` [PATCH v2 1/3] PCI: Add device code for AMD FCH SATA Controller in AHCI mode Bjorn Helgaas
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.