* [PATCH] ARM: dts: imx6sx-udoo-neo: Add HDMI support
@ 2021-12-31 1:41 Fabio Estevam
2022-01-28 7:25 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Estevam @ 2021-12-31 1:41 UTC (permalink / raw)
To: shawnguo
Cc: linux-arm-kernel, pbrobinson, tomm.merciai, marex, linux, Fabio Estevam
imx6sx-udoo-neo has a TDA19988 HDMI transmitter connected to the
parallel eLCDIF interface.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 74 ++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index ee645655090d..b6017fbcbe2e 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -183,6 +183,27 @@ &i2c2 { /* Brick snap in sensors connector */
status = "okay";
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ port {
+ hdmi: endpoint {
+ remote-endpoint = <&lcdc>;
+ };
+ };
+ };
+ };
+};
+
&i2c4 { /* Onboard Motion sensors */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,6 +211,18 @@ &i2c4 { /* Onboard Motion sensors */
status = "disabled";
};
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
+
+ port {
+ lcdc: endpoint {
+ remote-endpoint = <&hdmi>;
+ };
+ };
+};
+
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
@@ -227,12 +260,53 @@ pinctrl_i2c2: i2c2grp {
<MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins =
+ <MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1>,
+ <MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1>;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins =
<MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
<MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
};
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ >;
+ };
+
+
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: imx6sx-udoo-neo: Add HDMI support
2021-12-31 1:41 [PATCH] ARM: dts: imx6sx-udoo-neo: Add HDMI support Fabio Estevam
@ 2022-01-28 7:25 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2022-01-28 7:25 UTC (permalink / raw)
To: Fabio Estevam; +Cc: linux-arm-kernel, pbrobinson, tomm.merciai, marex, linux
On Thu, Dec 30, 2021 at 10:41:20PM -0300, Fabio Estevam wrote:
> imx6sx-udoo-neo has a TDA19988 HDMI transmitter connected to the
> parallel eLCDIF interface.
>
> Add support for it.
>
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-01-28 7:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-31 1:41 [PATCH] ARM: dts: imx6sx-udoo-neo: Add HDMI support Fabio Estevam
2022-01-28 7:25 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.