* [PATCH AUTOSEL 5.4 1/6] usb: mtu3: fix interval value for intr and isoc
@ 2022-01-03 17:30 ` Sasha Levin
0 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2022-01-03 17:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Chunfeng Yun, Greg Kroah-Hartman, Sasha Levin, matthias.bgg,
linux-usb, linux-arm-kernel, linux-mediatek
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
[ Upstream commit e3d4621c22f90c33321ae6a6baab60cdb8e5a77c ]
Use the Interval value from isoc/intr endpoint descriptor, no need
minus one. The original code doesn't cause transfer error for
normal cases, but it may have side effect with respond time of ERDY
or tPingTimeout.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/mtu3/mtu3_gadget.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 619c4598e64ea..63f82026cca39 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -85,7 +85,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
if (usb_endpoint_xfer_int(desc) ||
usb_endpoint_xfer_isoc(desc)) {
interval = desc->bInterval;
- interval = clamp_val(interval, 1, 16) - 1;
+ interval = clamp_val(interval, 1, 16);
if (usb_endpoint_xfer_isoc(desc) && comp_desc)
mult = comp_desc->bmAttributes;
}
@@ -97,7 +97,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
if (usb_endpoint_xfer_isoc(desc) ||
usb_endpoint_xfer_int(desc)) {
interval = desc->bInterval;
- interval = clamp_val(interval, 1, 16) - 1;
+ interval = clamp_val(interval, 1, 16);
mult = usb_endpoint_maxp_mult(desc) - 1;
}
break;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH AUTOSEL 5.4 1/6] usb: mtu3: fix interval value for intr and isoc
@ 2022-01-03 17:30 ` Sasha Levin
0 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2022-01-03 17:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Chunfeng Yun, Greg Kroah-Hartman, Sasha Levin, matthias.bgg,
linux-usb, linux-arm-kernel, linux-mediatek
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
[ Upstream commit e3d4621c22f90c33321ae6a6baab60cdb8e5a77c ]
Use the Interval value from isoc/intr endpoint descriptor, no need
minus one. The original code doesn't cause transfer error for
normal cases, but it may have side effect with respond time of ERDY
or tPingTimeout.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/mtu3/mtu3_gadget.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 619c4598e64ea..63f82026cca39 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -85,7 +85,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
if (usb_endpoint_xfer_int(desc) ||
usb_endpoint_xfer_isoc(desc)) {
interval = desc->bInterval;
- interval = clamp_val(interval, 1, 16) - 1;
+ interval = clamp_val(interval, 1, 16);
if (usb_endpoint_xfer_isoc(desc) && comp_desc)
mult = comp_desc->bmAttributes;
}
@@ -97,7 +97,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
if (usb_endpoint_xfer_isoc(desc) ||
usb_endpoint_xfer_int(desc)) {
interval = desc->bInterval;
- interval = clamp_val(interval, 1, 16) - 1;
+ interval = clamp_val(interval, 1, 16);
mult = usb_endpoint_maxp_mult(desc) - 1;
}
break;
--
2.34.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH AUTOSEL 5.4 2/6] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
2022-01-03 17:30 ` Sasha Levin
(?)
(?)
@ 2022-01-03 17:30 ` Sasha Levin
-1 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2022-01-03 17:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lixiaokeng, Lu Tixiong, Mike Christie, Lee Duncan, Linfeilong,
Martin K . Petersen, Sasha Levin, cleech, jejb, open-iscsi,
linux-scsi
From: Lixiaokeng <lixiaokeng@huawei.com>
[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ]
|- iscsi_if_destroy_conn |-dev_attr_show
|-iscsi_conn_teardown
|-spin_lock_bh |-iscsi_sw_tcp_conn_get_param
|-kfree(conn->persistent_address) |-iscsi_conn_get_param
|-kfree(conn->local_ipaddr)
==>|-read persistent_address
==>|-read local_ipaddr
|-spin_unlock_bh
When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.
Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com
Reported-by: Lu Tixiong <lutianxiong@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Lixiaokeng <lixiaokeng@huawei.com>
Signed-off-by: Linfeilong <linfeilong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/libiscsi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index eeba6180711cd..f3cee64c6d12f 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2948,6 +2948,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
+ char *tmp_persistent_address = conn->persistent_address;
+ char *tmp_local_ipaddr = conn->local_ipaddr;
del_timer_sync(&conn->transport_timer);
@@ -2969,8 +2971,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
spin_lock_bh(&session->frwd_lock);
free_pages((unsigned long) conn->data,
get_order(ISCSI_DEF_MAX_RECV_SEG_LEN));
- kfree(conn->persistent_address);
- kfree(conn->local_ipaddr);
/* regular RX path uses back_lock */
spin_lock_bh(&session->back_lock);
kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task,
@@ -2982,6 +2982,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
mutex_unlock(&session->eh_mutex);
iscsi_destroy_conn(cls_conn);
+ kfree(tmp_persistent_address);
+ kfree(tmp_local_ipaddr);
}
EXPORT_SYMBOL_GPL(iscsi_conn_teardown);
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH AUTOSEL 5.4 3/6] ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate
2022-01-03 17:30 ` Sasha Levin
` (2 preceding siblings ...)
(?)
@ 2022-01-03 17:30 ` Sasha Levin
-1 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2022-01-03 17:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: William Zhao, David S . Miller, Sasha Levin, steffen.klassert,
yoshfuji, dsahern, kuba, netdev
From: William Zhao <wizhao@redhat.com>
[ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ]
The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.
The UBSAN issue is as follows:
===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================
The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.
Signed-off-by: William Zhao <wizhao@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/ip6_vti.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 12ab6605d9617..8b44d3b53844e 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -795,6 +795,8 @@ vti6_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
struct net *net = dev_net(dev);
struct vti6_net *ip6n = net_generic(net, vti6_net_id);
+ memset(&p1, 0, sizeof(p1));
+
switch (cmd) {
case SIOCGETTUNNEL:
if (dev == ip6n->fb_tnl_dev) {
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH AUTOSEL 5.4 4/6] net: udp: fix alignment problem in udp4_seq_show()
2022-01-03 17:30 ` Sasha Levin
` (3 preceding siblings ...)
(?)
@ 2022-01-03 17:30 ` Sasha Levin
-1 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2022-01-03 17:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: yangxingwu, David S . Miller, Sasha Levin, yoshfuji, dsahern,
kuba, netdev
From: yangxingwu <xingwu.yang@gmail.com>
[ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ]
$ cat /pro/net/udp
before:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000
after:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/udp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index a0016f05c4f86..3cdf011a8dd8d 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2943,7 +2943,7 @@ int udp4_seq_show(struct seq_file *seq, void *v)
{
seq_setwidth(seq, 127);
if (v == SEQ_START_TOKEN)
- seq_puts(seq, " sl local_address rem_address st tx_queue "
+ seq_puts(seq, " sl local_address rem_address st tx_queue "
"rx_queue tr tm->when retrnsmt uid timeout "
"inode ref pointer drops");
else {
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH AUTOSEL 5.4 5/6] atlantic: Fix buff_ring OOB in aq_ring_rx_clean
2022-01-03 17:30 ` Sasha Levin
` (4 preceding siblings ...)
(?)
@ 2022-01-03 17:30 ` Sasha Levin
-1 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2022-01-03 17:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Zekun Shen, David S . Miller, Sasha Levin, irusskikh, kuba, netdev
From: Zekun Shen <bruceshenzk@gmail.com>
[ Upstream commit 5f50153288452e10b6edd69ec9112c49442b054a ]
The function obtain the next buffer without boundary check.
We should return with I/O error code.
The bug is found by fuzzing and the crash report is attached.
It is an OOB bug although reported as use-after-free.
[ 4.804724] BUG: KASAN: use-after-free in aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.805661] Read of size 4 at addr ffff888034fe93a8 by task ksoftirqd/0/9
[ 4.806505]
[ 4.806703] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W 5.6.0 #34
[ 4.809030] Call Trace:
[ 4.809343] dump_stack+0x76/0xa0
[ 4.809755] print_address_description.constprop.0+0x16/0x200
[ 4.810455] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.811234] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.813183] __kasan_report.cold+0x37/0x7c
[ 4.813715] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.814393] kasan_report+0xe/0x20
[ 4.814837] aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.815499] ? hw_atl_b0_hw_ring_rx_receive+0x9a5/0xb90 [atlantic]
[ 4.816290] aq_vec_poll+0x179/0x5d0 [atlantic]
[ 4.816870] ? _GLOBAL__sub_I_65535_1_aq_pci_func_init+0x20/0x20 [atlantic]
[ 4.817746] ? __next_timer_interrupt+0xba/0xf0
[ 4.818322] net_rx_action+0x363/0xbd0
[ 4.818803] ? call_timer_fn+0x240/0x240
[ 4.819302] ? __switch_to_asm+0x40/0x70
[ 4.819809] ? napi_busy_loop+0x520/0x520
[ 4.820324] __do_softirq+0x18c/0x634
[ 4.820797] ? takeover_tasklets+0x5f0/0x5f0
[ 4.821343] run_ksoftirqd+0x15/0x20
[ 4.821804] smpboot_thread_fn+0x2f1/0x6b0
[ 4.822331] ? smpboot_unregister_percpu_thread+0x160/0x160
[ 4.823041] ? __kthread_parkme+0x80/0x100
[ 4.823571] ? smpboot_unregister_percpu_thread+0x160/0x160
[ 4.824301] kthread+0x2b5/0x3b0
[ 4.824723] ? kthread_create_on_node+0xd0/0xd0
[ 4.825304] ret_from_fork+0x35/0x40
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index 03821b46a8cb4..4c22f119ac62f 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -305,6 +305,10 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
if (!buff->is_eop) {
buff_ = buff;
do {
+ if (buff_->next >= self->size) {
+ err = -EIO;
+ goto err_exit;
+ }
next_ = buff_->next,
buff_ = &self->buff_ring[next_];
is_rsc_completed =
@@ -327,6 +331,10 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
if (buff->is_error || buff->is_cso_err) {
buff_ = buff;
do {
+ if (buff_->next >= self->size) {
+ err = -EIO;
+ goto err_exit;
+ }
next_ = buff_->next,
buff_ = &self->buff_ring[next_];
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH AUTOSEL 5.4 6/6] mISDN: change function names to avoid conflicts
2022-01-03 17:30 ` Sasha Levin
` (5 preceding siblings ...)
(?)
@ 2022-01-03 17:30 ` Sasha Levin
-1 siblings, 0 replies; 8+ messages in thread
From: Sasha Levin @ 2022-01-03 17:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: wolfgang huang, k2ci, David S . Miller, Sasha Levin, isdn, netdev
From: wolfgang huang <huangjinhui@kylinos.cn>
[ Upstream commit 8b5fdfc57cc2471179d1c51081424ded833c16c8 ]
As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.
mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1
Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/isdn/mISDN/core.c | 6 +++---
drivers/isdn/mISDN/core.h | 4 ++--
drivers/isdn/mISDN/layer1.c | 4 ++--
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
index 55891e4204460..a41b4b2645941 100644
--- a/drivers/isdn/mISDN/core.c
+++ b/drivers/isdn/mISDN/core.c
@@ -381,7 +381,7 @@ mISDNInit(void)
err = mISDN_inittimer(&debug);
if (err)
goto error2;
- err = l1_init(&debug);
+ err = Isdnl1_Init(&debug);
if (err)
goto error3;
err = Isdnl2_Init(&debug);
@@ -395,7 +395,7 @@ mISDNInit(void)
error5:
Isdnl2_cleanup();
error4:
- l1_cleanup();
+ Isdnl1_cleanup();
error3:
mISDN_timer_cleanup();
error2:
@@ -408,7 +408,7 @@ static void mISDN_cleanup(void)
{
misdn_sock_cleanup();
Isdnl2_cleanup();
- l1_cleanup();
+ Isdnl1_cleanup();
mISDN_timer_cleanup();
class_unregister(&mISDN_class);
diff --git a/drivers/isdn/mISDN/core.h b/drivers/isdn/mISDN/core.h
index 23b44d3033279..42599f49c189d 100644
--- a/drivers/isdn/mISDN/core.h
+++ b/drivers/isdn/mISDN/core.h
@@ -60,8 +60,8 @@ struct Bprotocol *get_Bprotocol4id(u_int);
extern int mISDN_inittimer(u_int *);
extern void mISDN_timer_cleanup(void);
-extern int l1_init(u_int *);
-extern void l1_cleanup(void);
+extern int Isdnl1_Init(u_int *);
+extern void Isdnl1_cleanup(void);
extern int Isdnl2_Init(u_int *);
extern void Isdnl2_cleanup(void);
diff --git a/drivers/isdn/mISDN/layer1.c b/drivers/isdn/mISDN/layer1.c
index 98a3bc6c17009..7b31c25a550e3 100644
--- a/drivers/isdn/mISDN/layer1.c
+++ b/drivers/isdn/mISDN/layer1.c
@@ -398,7 +398,7 @@ create_l1(struct dchannel *dch, dchannel_l1callback *dcb) {
EXPORT_SYMBOL(create_l1);
int
-l1_init(u_int *deb)
+Isdnl1_Init(u_int *deb)
{
debug = deb;
l1fsm_s.state_count = L1S_STATE_COUNT;
@@ -409,7 +409,7 @@ l1_init(u_int *deb)
}
void
-l1_cleanup(void)
+Isdnl1_cleanup(void)
{
mISDN_FsmFree(&l1fsm_s);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread