[PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Lad Prabhakar]

Hi All,

This patch series aims to drop using platform_get_resource() for IRQ types
in preparation for removal of static setup of IRQ resource from DT core
code.

Dropping usage of platform_get_resource() was agreed based on
the discussion [0].

[0] https://patchwork.kernel.org/project/linux-renesas-soc/
patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

Lad Prabhakar (3):
  dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
    interrupt
  dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
    interrupt
  dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt

 drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
 drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
 drivers/dma/nbpfaxi.c            | 14 ++++++--------
 3 files changed, 14 insertions(+), 23 deletions(-)

-- 
2.17.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Lad Prabhakar]

Hi All,

This patch series aims to drop using platform_get_resource() for IRQ types
in preparation for removal of static setup of IRQ resource from DT core
code.

Dropping usage of platform_get_resource() was agreed based on
the discussion [0].

[0] https://patchwork.kernel.org/project/linux-renesas-soc/
patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

Lad Prabhakar (3):
  dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
    interrupt
  dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
    interrupt
  dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt

 drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
 drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
 drivers/dma/nbpfaxi.c            | 14 ++++++--------
 3 files changed, 14 insertions(+), 23 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/3] dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

There are no non-DT users for this driver so interrupt range
(irq_res->start-irq_res->end) is no longer required and with DT we will
be sure it will be a single IRQ resource for each index.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* Updated the check to consider 0 as no IRQ
---
 drivers/dma/nbpfaxi.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c
index 9c52c57919c6..a7063e9cd551 100644
--- a/drivers/dma/nbpfaxi.c
+++ b/drivers/dma/nbpfaxi.c
@@ -1294,7 +1294,7 @@ static int nbpf_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct nbpf_device *nbpf;
 	struct dma_device *dma_dev;
-	struct resource *iomem, *irq_res;
+	struct resource *iomem;
 	const struct nbpf_config *cfg;
 	int num_channels;
 	int ret, irq, eirq, i;
@@ -1335,13 +1335,11 @@ static int nbpf_probe(struct platform_device *pdev)
 	nbpf->config = cfg;
 
 	for (i = 0; irqs < ARRAY_SIZE(irqbuf); i++) {
-		irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-		if (!irq_res)
-			break;
-
-		for (irq = irq_res->start; irq <= irq_res->end;
-		     irq++, irqs++)
-			irqbuf[irqs] = irq;
+		irq = platform_get_irq_optional(pdev, i);
+		if (irq < 0 && irq != -ENXIO)
+			return irq;
+		if (irq > 0)
+			irqbuf[irqs++] = irq;
 	}
 
 	/*
-- 
2.17.1

[PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* No change
---
 drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
index 6ad8afbb95f2..c0fffde7fe08 100644
--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 		return PTR_ERR(hsdma->clk);
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "No irq resource for %s\n",
-			dev_name(&pdev->dev));
-		return -EINVAL;
-	}
-	hsdma->irq = res->start;
+	err = platform_get_irq(pdev, 0);
+	if (err < 0)
+		return err;
+	hsdma->irq = err;
 
 	refcount_set(&hsdma->pc_refcnt, 0);
 	spin_lock_init(&hsdma->lock);
-- 
2.17.1

[PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* No change
---
 drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
index 6ad8afbb95f2..c0fffde7fe08 100644
--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 		return PTR_ERR(hsdma->clk);
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "No irq resource for %s\n",
-			dev_name(&pdev->dev));
-		return -EINVAL;
-	}
-	hsdma->irq = res->start;
+	err = platform_get_irq(pdev, 0);
+	if (err < 0)
+		return err;
+	hsdma->irq = err;
 
 	refcount_set(&hsdma->pc_refcnt, 0);
 	spin_lock_init(&hsdma->lock);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* No change
---
 drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
index 6ad8afbb95f2..c0fffde7fe08 100644
--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
 		return PTR_ERR(hsdma->clk);
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "No irq resource for %s\n",
-			dev_name(&pdev->dev));
-		return -EINVAL;
-	}
-	hsdma->irq = res->start;
+	err = platform_get_irq(pdev, 0);
+	if (err < 0)
+		return err;
+	hsdma->irq = err;
 
 	refcount_set(&hsdma->pc_refcnt, 0);
 	spin_lock_init(&hsdma->lock);
-- 
2.17.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Vinod Koul]

On 04-01-22, 16:35, Lad Prabhakar wrote:
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2
> * No change
> ---
>  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> index 6ad8afbb95f2..c0fffde7fe08 100644
> --- a/drivers/dma/mediatek/mtk-hsdma.c
> +++ b/drivers/dma/mediatek/mtk-hsdma.c
> @@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
>  		return PTR_ERR(hsdma->clk);
>  	}
>  
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (!res) {
> -		dev_err(&pdev->dev, "No irq resource for %s\n",
> -			dev_name(&pdev->dev));
> -		return -EINVAL;
> -	}
> -	hsdma->irq = res->start;
> +	err = platform_get_irq(pdev, 0);

why not platform_get_irq_optional() here and 3rd patch ?

> +	if (err < 0)
> +		return err;
> +	hsdma->irq = err;
>  
>  	refcount_set(&hsdma->pc_refcnt, 0);
>  	spin_lock_init(&hsdma->lock);
> -- 
> 2.17.1

-- 
~Vinod

Re: [PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Vinod Koul]

On 04-01-22, 16:35, Lad Prabhakar wrote:
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2
> * No change
> ---
>  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> index 6ad8afbb95f2..c0fffde7fe08 100644
> --- a/drivers/dma/mediatek/mtk-hsdma.c
> +++ b/drivers/dma/mediatek/mtk-hsdma.c
> @@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
>  		return PTR_ERR(hsdma->clk);
>  	}
>  
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (!res) {
> -		dev_err(&pdev->dev, "No irq resource for %s\n",
> -			dev_name(&pdev->dev));
> -		return -EINVAL;
> -	}
> -	hsdma->irq = res->start;
> +	err = platform_get_irq(pdev, 0);

why not platform_get_irq_optional() here and 3rd patch ?

> +	if (err < 0)
> +		return err;
> +	hsdma->irq = err;
>  
>  	refcount_set(&hsdma->pc_refcnt, 0);
>  	spin_lock_init(&hsdma->lock);
> -- 
> 2.17.1

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Vinod Koul]

On 04-01-22, 16:35, Lad Prabhakar wrote:
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2
> * No change
> ---
>  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> index 6ad8afbb95f2..c0fffde7fe08 100644
> --- a/drivers/dma/mediatek/mtk-hsdma.c
> +++ b/drivers/dma/mediatek/mtk-hsdma.c
> @@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
>  		return PTR_ERR(hsdma->clk);
>  	}
>  
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (!res) {
> -		dev_err(&pdev->dev, "No irq resource for %s\n",
> -			dev_name(&pdev->dev));
> -		return -EINVAL;
> -	}
> -	hsdma->irq = res->start;
> +	err = platform_get_irq(pdev, 0);

why not platform_get_irq_optional() here and 3rd patch ?

> +	if (err < 0)
> +		return err;
> +	hsdma->irq = err;
>  
>  	refcount_set(&hsdma->pc_refcnt, 0);
>  	spin_lock_init(&hsdma->lock);
> -- 
> 2.17.1

-- 
~Vinod

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Lad, Prabhakar]

Hi Vinod,

Thank you for the review.

On Thu, Jan 6, 2022 at 5:27 AM Vinod Koul <vkoul@kernel.org> wrote:
>
> On 04-01-22, 16:35, Lad Prabhakar wrote:
> > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> > allocation of IRQ resources in DT core code, this causes an issue
> > when using hierarchical interrupt domains using "interrupts" property
> > in the node as this bypasses the hierarchical setup and messes up the
> > irq chaining.
> >
> > In preparation for removal of static setup of IRQ resource from DT core
> > code use platform_get_irq().
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * No change
> > ---
> >  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
> >  1 file changed, 4 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> > index 6ad8afbb95f2..c0fffde7fe08 100644
> > --- a/drivers/dma/mediatek/mtk-hsdma.c
> > +++ b/drivers/dma/mediatek/mtk-hsdma.c
> > @@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
> >               return PTR_ERR(hsdma->clk);
> >       }
> >
> > -     res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > -     if (!res) {
> > -             dev_err(&pdev->dev, "No irq resource for %s\n",
> > -                     dev_name(&pdev->dev));
> > -             return -EINVAL;
> > -     }
> > -     hsdma->irq = res->start;
> > +     err = platform_get_irq(pdev, 0);
>
> why not platform_get_irq_optional() here and 3rd patch ?
>
For patches #2 and #3 the driver expects the IRQ to be present
strictly, that is the reason platform_get_irq_optional() isn't used so
that the behavior of the driver is unchanged with this patch.

Cheers,
Prabhakar

> > +     if (err < 0)
> > +             return err;
> > +     hsdma->irq = err;
> >
> >       refcount_set(&hsdma->pc_refcnt, 0);
> >       spin_lock_init(&hsdma->lock);
> > --
> > 2.17.1
>
> --
> ~Vinod

Re: [PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Lad, Prabhakar]

Hi Vinod,

Thank you for the review.

On Thu, Jan 6, 2022 at 5:27 AM Vinod Koul <vkoul@kernel.org> wrote:
>
> On 04-01-22, 16:35, Lad Prabhakar wrote:
> > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> > allocation of IRQ resources in DT core code, this causes an issue
> > when using hierarchical interrupt domains using "interrupts" property
> > in the node as this bypasses the hierarchical setup and messes up the
> > irq chaining.
> >
> > In preparation for removal of static setup of IRQ resource from DT core
> > code use platform_get_irq().
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * No change
> > ---
> >  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
> >  1 file changed, 4 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> > index 6ad8afbb95f2..c0fffde7fe08 100644
> > --- a/drivers/dma/mediatek/mtk-hsdma.c
> > +++ b/drivers/dma/mediatek/mtk-hsdma.c
> > @@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
> >               return PTR_ERR(hsdma->clk);
> >       }
> >
> > -     res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > -     if (!res) {
> > -             dev_err(&pdev->dev, "No irq resource for %s\n",
> > -                     dev_name(&pdev->dev));
> > -             return -EINVAL;
> > -     }
> > -     hsdma->irq = res->start;
> > +     err = platform_get_irq(pdev, 0);
>
> why not platform_get_irq_optional() here and 3rd patch ?
>
For patches #2 and #3 the driver expects the IRQ to be present
strictly, that is the reason platform_get_irq_optional() isn't used so
that the behavior of the driver is unchanged with this patch.

Cheers,
Prabhakar

> > +     if (err < 0)
> > +             return err;
> > +     hsdma->irq = err;
> >
> >       refcount_set(&hsdma->pc_refcnt, 0);
> >       spin_lock_init(&hsdma->lock);
> > --
> > 2.17.1
>
> --
> ~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt

[Lad, Prabhakar]

Hi Vinod,

Thank you for the review.

On Thu, Jan 6, 2022 at 5:27 AM Vinod Koul <vkoul@kernel.org> wrote:
>
> On 04-01-22, 16:35, Lad Prabhakar wrote:
> > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> > allocation of IRQ resources in DT core code, this causes an issue
> > when using hierarchical interrupt domains using "interrupts" property
> > in the node as this bypasses the hierarchical setup and messes up the
> > irq chaining.
> >
> > In preparation for removal of static setup of IRQ resource from DT core
> > code use platform_get_irq().
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > v1->v2
> > * No change
> > ---
> >  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
> >  1 file changed, 4 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c
> > index 6ad8afbb95f2..c0fffde7fe08 100644
> > --- a/drivers/dma/mediatek/mtk-hsdma.c
> > +++ b/drivers/dma/mediatek/mtk-hsdma.c
> > @@ -923,13 +923,10 @@ static int mtk_hsdma_probe(struct platform_device *pdev)
> >               return PTR_ERR(hsdma->clk);
> >       }
> >
> > -     res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > -     if (!res) {
> > -             dev_err(&pdev->dev, "No irq resource for %s\n",
> > -                     dev_name(&pdev->dev));
> > -             return -EINVAL;
> > -     }
> > -     hsdma->irq = res->start;
> > +     err = platform_get_irq(pdev, 0);
>
> why not platform_get_irq_optional() here and 3rd patch ?
>
For patches #2 and #3 the driver expects the IRQ to be present
strictly, that is the reason platform_get_irq_optional() isn't used so
that the behavior of the driver is unchanged with this patch.

Cheers,
Prabhakar

> > +     if (err < 0)
> > +             return err;
> > +     hsdma->irq = err;
> >
> >       refcount_set(&hsdma->pc_refcnt, 0);
> >       spin_lock_init(&hsdma->lock);
> > --
> > 2.17.1
>
> --
> ~Vinod

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 3/3] dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* No change
---
 drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
index 41ef9f15d3d5..f8847c48ba03 100644
--- a/drivers/dma/mediatek/mtk-cqdma.c
+++ b/drivers/dma/mediatek/mtk-cqdma.c
@@ -751,7 +751,6 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
 	struct mtk_cqdma_device *cqdma;
 	struct mtk_cqdma_vchan *vc;
 	struct dma_device *dd;
-	struct resource *res;
 	int err;
 	u32 i;
 
@@ -824,13 +823,10 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
 			return PTR_ERR(cqdma->pc[i]->base);
 
 		/* allocate IRQ resource */
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-		if (!res) {
-			dev_err(&pdev->dev, "No irq resource for %s\n",
-				dev_name(&pdev->dev));
-			return -EINVAL;
-		}
-		cqdma->pc[i]->irq = res->start;
+		err = platform_get_irq(pdev, i);
+		if (err < 0)
+			return err;
+		cqdma->pc[i]->irq = err;
 
 		err = devm_request_irq(&pdev->dev, cqdma->pc[i]->irq,
 				       mtk_cqdma_irq, 0, dev_name(&pdev->dev),
-- 
2.17.1

[PATCH v2 3/3] dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* No change
---
 drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
index 41ef9f15d3d5..f8847c48ba03 100644
--- a/drivers/dma/mediatek/mtk-cqdma.c
+++ b/drivers/dma/mediatek/mtk-cqdma.c
@@ -751,7 +751,6 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
 	struct mtk_cqdma_device *cqdma;
 	struct mtk_cqdma_vchan *vc;
 	struct dma_device *dd;
-	struct resource *res;
 	int err;
 	u32 i;
 
@@ -824,13 +823,10 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
 			return PTR_ERR(cqdma->pc[i]->base);
 
 		/* allocate IRQ resource */
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-		if (!res) {
-			dev_err(&pdev->dev, "No irq resource for %s\n",
-				dev_name(&pdev->dev));
-			return -EINVAL;
-		}
-		cqdma->pc[i]->irq = res->start;
+		err = platform_get_irq(pdev, i);
+		if (err < 0)
+			return err;
+		cqdma->pc[i]->irq = err;
 
 		err = devm_request_irq(&pdev->dev, cqdma->pc[i]->irq,
 				       mtk_cqdma_irq, 0, dev_name(&pdev->dev),
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/3] dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt

[Lad Prabhakar]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* No change
---
 drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
index 41ef9f15d3d5..f8847c48ba03 100644
--- a/drivers/dma/mediatek/mtk-cqdma.c
+++ b/drivers/dma/mediatek/mtk-cqdma.c
@@ -751,7 +751,6 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
 	struct mtk_cqdma_device *cqdma;
 	struct mtk_cqdma_vchan *vc;
 	struct dma_device *dd;
-	struct resource *res;
 	int err;
 	u32 i;
 
@@ -824,13 +823,10 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
 			return PTR_ERR(cqdma->pc[i]->base);
 
 		/* allocate IRQ resource */
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-		if (!res) {
-			dev_err(&pdev->dev, "No irq resource for %s\n",
-				dev_name(&pdev->dev));
-			return -EINVAL;
-		}
-		cqdma->pc[i]->irq = res->start;
+		err = platform_get_irq(pdev, i);
+		if (err < 0)
+			return err;
+		cqdma->pc[i]->irq = err;
 
 		err = devm_request_irq(&pdev->dev, cqdma->pc[i]->irq,
 				       mtk_cqdma_irq, 0, dev_name(&pdev->dev),
-- 
2.17.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Andy Shevchenko]

On Tue, Jan 4, 2022 at 6:35 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> Hi All,
>
> This patch series aims to drop using platform_get_resource() for IRQ types
> in preparation for removal of static setup of IRQ resource from DT core
> code.
>
> Dropping usage of platform_get_resource() was agreed based on
> the discussion [0].


All three looks good to me, FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> [0] https://patchwork.kernel.org/project/linux-renesas-soc/
> patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (3):
>   dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
>     interrupt
>   dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
>     interrupt
>   dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt
>
>  drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
>  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
>  drivers/dma/nbpfaxi.c            | 14 ++++++--------
>  3 files changed, 14 insertions(+), 23 deletions(-)
>
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Andy Shevchenko]

On Tue, Jan 4, 2022 at 6:35 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> Hi All,
>
> This patch series aims to drop using platform_get_resource() for IRQ types
> in preparation for removal of static setup of IRQ resource from DT core
> code.
>
> Dropping usage of platform_get_resource() was agreed based on
> the discussion [0].


All three looks good to me, FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> [0] https://patchwork.kernel.org/project/linux-renesas-soc/
> patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (3):
>   dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
>     interrupt
>   dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
>     interrupt
>   dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt
>
>  drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
>  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
>  drivers/dma/nbpfaxi.c            | 14 ++++++--------
>  3 files changed, 14 insertions(+), 23 deletions(-)
>
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Lad, Prabhakar]

Hi Sean/Vinod,

Not sure how I missed you to add in the To/CC list.

On Tue, Jan 4, 2022 at 4:35 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> Hi All,
>
> This patch series aims to drop using platform_get_resource() for IRQ types
> in preparation for removal of static setup of IRQ resource from DT core
> code.
>
> Dropping usage of platform_get_resource() was agreed based on
> the discussion [0].
>
> [0] https://patchwork.kernel.org/project/linux-renesas-soc/
> patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (3):
>   dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
>     interrupt
>   dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
>     interrupt
>   dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt
>
>  drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
>  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
>  drivers/dma/nbpfaxi.c            | 14 ++++++--------
>  3 files changed, 14 insertions(+), 23 deletions(-)
>
These patches aren't in -next yet. Do you want me to resend them?

Cheers,
Prabhakar

> --
> 2.17.1
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Lad, Prabhakar]

Hi Sean/Vinod,

Not sure how I missed you to add in the To/CC list.

On Tue, Jan 4, 2022 at 4:35 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> Hi All,
>
> This patch series aims to drop using platform_get_resource() for IRQ types
> in preparation for removal of static setup of IRQ resource from DT core
> code.
>
> Dropping usage of platform_get_resource() was agreed based on
> the discussion [0].
>
> [0] https://patchwork.kernel.org/project/linux-renesas-soc/
> patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (3):
>   dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
>     interrupt
>   dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
>     interrupt
>   dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt
>
>  drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
>  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
>  drivers/dma/nbpfaxi.c            | 14 ++++++--------
>  3 files changed, 14 insertions(+), 23 deletions(-)
>
These patches aren't in -next yet. Do you want me to resend them?

Cheers,
Prabhakar

> --
> 2.17.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Vinod Koul]

On 09-03-22, 11:37, Lad, Prabhakar wrote:
> Hi Sean/Vinod,
> 
> Not sure how I missed you to add in the To/CC list.
> 
> On Tue, Jan 4, 2022 at 4:35 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> >
> > Hi All,
> >
> > This patch series aims to drop using platform_get_resource() for IRQ types
> > in preparation for removal of static setup of IRQ resource from DT core
> > code.
> >
> > Dropping usage of platform_get_resource() was agreed based on
> > the discussion [0].
> >
> > [0] https://patchwork.kernel.org/project/linux-renesas-soc/
> > patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
> >
> > Cheers,
> > Prabhakar
> >
> > Lad Prabhakar (3):
> >   dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
> >     interrupt
> >   dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
> >     interrupt
> >   dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt
> >
> >  drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
> >  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
> >  drivers/dma/nbpfaxi.c            | 14 ++++++--------
> >  3 files changed, 14 insertions(+), 23 deletions(-)
> >
> These patches aren't in -next yet. Do you want me to resend them?

Yes that would be ideal! But after upcoming merge window closes

-- 
~Vinod

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's

[Vinod Koul]

On 09-03-22, 11:37, Lad, Prabhakar wrote:
> Hi Sean/Vinod,
> 
> Not sure how I missed you to add in the To/CC list.
> 
> On Tue, Jan 4, 2022 at 4:35 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> >
> > Hi All,
> >
> > This patch series aims to drop using platform_get_resource() for IRQ types
> > in preparation for removal of static setup of IRQ resource from DT core
> > code.
> >
> > Dropping usage of platform_get_resource() was agreed based on
> > the discussion [0].
> >
> > [0] https://patchwork.kernel.org/project/linux-renesas-soc/
> > patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
> >
> > Cheers,
> > Prabhakar
> >
> > Lad Prabhakar (3):
> >   dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the
> >     interrupt
> >   dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the
> >     interrupt
> >   dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt
> >
> >  drivers/dma/mediatek/mtk-cqdma.c | 12 ++++--------
> >  drivers/dma/mediatek/mtk-hsdma.c | 11 ++++-------
> >  drivers/dma/nbpfaxi.c            | 14 ++++++--------
> >  3 files changed, 14 insertions(+), 23 deletions(-)
> >
> These patches aren't in -next yet. Do you want me to resend them?

Yes that would be ideal! But after upcoming merge window closes

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel