All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Sebastian Reichel <sre@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Subject: [PATCH v2 4/4] dt-bindings: mfd: maxim,max14577: convert to dtschema
Date: Tue, 11 Jan 2022 18:43:37 +0100	[thread overview]
Message-ID: <20220111174337.223320-5-krzysztof.kozlowski@canonical.com> (raw)
In-Reply-To: <20220111174337.223320-1-krzysztof.kozlowski@canonical.com>

Convert the MFD part of Maxim MAX14577/MAX77836 MUIC to DT schema
format.  The example DTS was copied from existing DTS
(exynos3250-rinato.dts), so keep the license as GPL-2.0-only.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mfd/max14577.txt      | 147 -------------
 .../bindings/mfd/maxim,max14577.yaml          | 195 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 196 insertions(+), 148 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml

diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
deleted file mode 100644
index be11943a0560..000000000000
--- a/Documentation/devicetree/bindings/mfd/max14577.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Maxim MAX14577/77836 Multi-Function Device
-
-MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
-Battery Charger and SFOUT LDO output for powering USB devices. It is
-interfaced to host controller using I2C.
-
-MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
-For the description of Fuel Gauge low SOC alert interrupt see:
-../power/supply/max17040_battery.txt
-
-
-Required properties:
-- compatible : Must be "maxim,max14577" or "maxim,max77836".
-- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
-- interrupts : IRQ line for the chip.
-
-
-Required nodes:
- - charger :
-	Node for configuring the charger driver.
-	Required properties:
-		- compatible : "maxim,max14577-charger"
-			or "maxim,max77836-charger"
-		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
-			Valid values:
-			- for max14577: 90000 - 950000;
-			- for max77836: 45000 - 475000;
-		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
-			Valid values:
-			- for max14577: 50000 - 200000;
-			- for max77836: 5000 - 100000;
-		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
-			In an overvoltage condition, INT asserts and charging
-			stops. Valid values:
-			- 6000000, 6500000, 7000000, 7500000;
-		- maxim,constant-uvolt : Battery Constant Voltage in uV;
-			Valid values:
-			- 4000000 - 4280000 (step by 20000);
-			- 4350000;
-
-
-Optional nodes:
-- max14577-muic/max77836-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
-
-- regulators :
-	Required properties:
-		- compatible : "maxim,max14577-regulator"
-			or "maxim,max77836-regulator"
-
-	May contain a sub-node per regulator from the list below. Each
-	sub-node should contain the constraints and initialization information
-	for that regulator. See regulator.txt for a description of standard
-	properties for these sub-nodes.
-
-	List of valid regulator names:
-	- for max14577: CHARGER, SAFEOUT.
-	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
-
-	The SAFEOUT is a fixed voltage regulator so there is no need to specify
-	voltages for it.
-
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-max14577@25 {
-	compatible = "maxim,max14577";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max14577-muic {
-		compatible = "maxim,max14577-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max14577-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max14577-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <450000>;
-		maxim,eoc-uamp = <50000>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
-
-
-max77836@25 {
-	compatible = "maxim,max77836";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max77836-muic {
-		compatible = "maxim,max77836-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max77836-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3950000>;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max77836-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <225000>;
-		maxim,eoc-uamp = <7500>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
new file mode 100644
index 000000000000..55ab60750798
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout regulators, charger and MicroUSB management IC.
+
+  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
+  management IC.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577
+      - maxim,max77836
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max14577.yaml
+
+  extcon:
+    type: object
+    properties:
+      compatible:
+        enum:
+          - maxim,max14577-muic
+          - maxim,max77836-muic
+
+    required:
+      - compatible
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max14577.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - charger
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577
+    then:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max14577-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max14577-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max14577-regulator
+    else:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max77836-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max77836-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max77836-regulator
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max14577";
+            reg = <0x25>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            extcon {
+                compatible = "maxim,max14577-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max14577-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <90000>;
+                    regulator-max-microamp = <950000>;
+                    regulator-boot-on;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max14577-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <450000>;
+                maxim,eoc-uamp = <50000>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max77836";
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_NONE>;
+            reg = <0x25>;
+            wakeup-source;
+
+            extcon {
+                compatible = "maxim,max77836-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max77836-regulator";
+
+                SAFEOUT {
+                  regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                  regulator-name = "CHARGER";
+                  regulator-min-microamp = <45000>;
+                  regulator-max-microamp = <475000>;
+                  regulator-boot-on;
+                };
+
+                LDO1 {
+                  regulator-name = "MOT_2.7V";
+                  regulator-min-microvolt = <1100000>;
+                  regulator-max-microvolt = <2700000>;
+                };
+
+                LDO2 {
+                  regulator-name = "UNUSED_LDO2";
+                  regulator-min-microvolt = <800000>;
+                  regulator-max-microvolt = <3950000>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77836-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <225000>;
+                maxim,eoc-uamp = <7500>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 13e21c229c5d..af392bd04874 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11692,11 +11692,11 @@ M:	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/*/maxim,max14577.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77686.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77693.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77843.yaml
 F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
-F:	Documentation/devicetree/bindings/mfd/max14577.txt
 F:	drivers/*/*max77843.c
 F:	drivers/*/max14577*.c
 F:	drivers/*/max77686*.c
-- 
2.32.0


WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Sebastian Reichel <sre@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Subject: [PATCH v2 4/4] dt-bindings: mfd: maxim,max14577: convert to dtschema
Date: Tue, 11 Jan 2022 18:43:37 +0100	[thread overview]
Message-ID: <20220111174337.223320-5-krzysztof.kozlowski@canonical.com> (raw)
In-Reply-To: <20220111174337.223320-1-krzysztof.kozlowski@canonical.com>

Convert the MFD part of Maxim MAX14577/MAX77836 MUIC to DT schema
format.  The example DTS was copied from existing DTS
(exynos3250-rinato.dts), so keep the license as GPL-2.0-only.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mfd/max14577.txt      | 147 -------------
 .../bindings/mfd/maxim,max14577.yaml          | 195 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 196 insertions(+), 148 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml

diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
deleted file mode 100644
index be11943a0560..000000000000
--- a/Documentation/devicetree/bindings/mfd/max14577.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Maxim MAX14577/77836 Multi-Function Device
-
-MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
-Battery Charger and SFOUT LDO output for powering USB devices. It is
-interfaced to host controller using I2C.
-
-MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
-For the description of Fuel Gauge low SOC alert interrupt see:
-../power/supply/max17040_battery.txt
-
-
-Required properties:
-- compatible : Must be "maxim,max14577" or "maxim,max77836".
-- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
-- interrupts : IRQ line for the chip.
-
-
-Required nodes:
- - charger :
-	Node for configuring the charger driver.
-	Required properties:
-		- compatible : "maxim,max14577-charger"
-			or "maxim,max77836-charger"
-		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
-			Valid values:
-			- for max14577: 90000 - 950000;
-			- for max77836: 45000 - 475000;
-		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
-			Valid values:
-			- for max14577: 50000 - 200000;
-			- for max77836: 5000 - 100000;
-		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
-			In an overvoltage condition, INT asserts and charging
-			stops. Valid values:
-			- 6000000, 6500000, 7000000, 7500000;
-		- maxim,constant-uvolt : Battery Constant Voltage in uV;
-			Valid values:
-			- 4000000 - 4280000 (step by 20000);
-			- 4350000;
-
-
-Optional nodes:
-- max14577-muic/max77836-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
-
-- regulators :
-	Required properties:
-		- compatible : "maxim,max14577-regulator"
-			or "maxim,max77836-regulator"
-
-	May contain a sub-node per regulator from the list below. Each
-	sub-node should contain the constraints and initialization information
-	for that regulator. See regulator.txt for a description of standard
-	properties for these sub-nodes.
-
-	List of valid regulator names:
-	- for max14577: CHARGER, SAFEOUT.
-	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
-
-	The SAFEOUT is a fixed voltage regulator so there is no need to specify
-	voltages for it.
-
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-max14577@25 {
-	compatible = "maxim,max14577";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max14577-muic {
-		compatible = "maxim,max14577-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max14577-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max14577-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <450000>;
-		maxim,eoc-uamp = <50000>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
-
-
-max77836@25 {
-	compatible = "maxim,max77836";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max77836-muic {
-		compatible = "maxim,max77836-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max77836-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3950000>;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max77836-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <225000>;
-		maxim,eoc-uamp = <7500>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
new file mode 100644
index 000000000000..55ab60750798
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout regulators, charger and MicroUSB management IC.
+
+  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
+  management IC.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577
+      - maxim,max77836
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max14577.yaml
+
+  extcon:
+    type: object
+    properties:
+      compatible:
+        enum:
+          - maxim,max14577-muic
+          - maxim,max77836-muic
+
+    required:
+      - compatible
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max14577.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - charger
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577
+    then:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max14577-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max14577-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max14577-regulator
+    else:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max77836-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max77836-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max77836-regulator
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max14577";
+            reg = <0x25>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            extcon {
+                compatible = "maxim,max14577-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max14577-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <90000>;
+                    regulator-max-microamp = <950000>;
+                    regulator-boot-on;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max14577-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <450000>;
+                maxim,eoc-uamp = <50000>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max77836";
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_NONE>;
+            reg = <0x25>;
+            wakeup-source;
+
+            extcon {
+                compatible = "maxim,max77836-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max77836-regulator";
+
+                SAFEOUT {
+                  regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                  regulator-name = "CHARGER";
+                  regulator-min-microamp = <45000>;
+                  regulator-max-microamp = <475000>;
+                  regulator-boot-on;
+                };
+
+                LDO1 {
+                  regulator-name = "MOT_2.7V";
+                  regulator-min-microvolt = <1100000>;
+                  regulator-max-microvolt = <2700000>;
+                };
+
+                LDO2 {
+                  regulator-name = "UNUSED_LDO2";
+                  regulator-min-microvolt = <800000>;
+                  regulator-max-microvolt = <3950000>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77836-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <225000>;
+                maxim,eoc-uamp = <7500>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 13e21c229c5d..af392bd04874 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11692,11 +11692,11 @@ M:	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/*/maxim,max14577.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77686.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77693.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77843.yaml
 F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
-F:	Documentation/devicetree/bindings/mfd/max14577.txt
 F:	drivers/*/*max77843.c
 F:	drivers/*/max14577*.c
 F:	drivers/*/max77686*.c
-- 
2.32.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-01-11 17:45 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-11 17:43 [PATCH v2 0/4] mfd/power/regulators: dt-bindings: max14577: convert to dtschema Krzysztof Kozlowski
2022-01-11 17:43 ` Krzysztof Kozlowski
2022-01-11 17:43 ` [PATCH v2 1/4] ARM: dts: exynos: Align MAX77836 nodes with dtschema on Monk and Rinato Krzysztof Kozlowski
2022-01-11 17:43   ` Krzysztof Kozlowski
2022-01-23 17:10   ` (subset) " Krzysztof Kozlowski
2022-01-23 17:10     ` Krzysztof Kozlowski
2022-01-11 17:43 ` [PATCH v2 2/4] dt-bindings: power: supply: maxim,max14577: convert to dtschema Krzysztof Kozlowski
2022-01-11 17:43   ` [PATCH v2 2/4] dt-bindings: power: supply: maxim, max14577: " Krzysztof Kozlowski
2022-01-12 11:29   ` [PATCH v2 2/4] dt-bindings: power: supply: maxim,max14577: " Sebastian Reichel
2022-01-12 11:29     ` Sebastian Reichel
2022-02-14 14:17     ` Lee Jones
2022-02-14 14:17       ` Lee Jones
2022-02-14 16:37       ` Sebastian Reichel
2022-02-14 16:37         ` Sebastian Reichel
2022-01-11 17:43 ` [PATCH v2 3/4] regulator: dt-bindings: " Krzysztof Kozlowski
2022-01-11 17:43   ` [PATCH v2 3/4] regulator: dt-bindings: maxim, max14577: " Krzysztof Kozlowski
2022-01-11 22:21   ` [PATCH v2 3/4] regulator: dt-bindings: maxim,max14577: " Rob Herring
2022-01-11 22:21     ` Rob Herring
2022-02-14 16:43   ` Mark Brown
2022-02-14 16:43     ` Mark Brown
2022-02-14 16:54     ` Krzysztof Kozlowski
2022-02-14 16:54       ` [PATCH v2 3/4] regulator: dt-bindings: maxim, max14577: " Krzysztof Kozlowski
2022-02-14 16:59       ` [PATCH v2 3/4] regulator: dt-bindings: maxim,max14577: " Mark Brown
2022-02-14 16:59         ` Mark Brown
2022-01-11 17:43 ` Krzysztof Kozlowski [this message]
2022-01-11 17:43   ` [PATCH v2 4/4] dt-bindings: mfd: " Krzysztof Kozlowski
2022-02-06 17:39 ` [PATCH v2 0/4] mfd/power/regulators: dt-bindings: max14577: " Krzysztof Kozlowski
2022-02-06 17:39   ` Krzysztof Kozlowski
2022-02-07  9:34   ` Lee Jones
2022-02-07  9:34     ` Lee Jones
2022-02-07  9:43     ` Krzysztof Kozlowski
2022-02-07  9:43       ` Krzysztof Kozlowski
2022-02-07 10:11       ` Lee Jones
2022-02-07 10:11         ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220111174337.223320-5-krzysztof.kozlowski@canonical.com \
    --to=krzysztof.kozlowski@canonical.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.