* [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
This series adds support for several popular Amlogic S905X3 (SM1) Android
Set-Top Box devices. Like most Android box devices, they ship in variants
with multiple RAM, eMMC, WiFi and BT configurations. RAM and eMMC are not
something we need to consider to get a working boot, but we do need to get
the correct connectivity spec. Broadly speaking we see boxes with Higher
and Lower spec connectivity; High spec is Gigabit Ethernet and Faster dual
antennna WiFi, and Lower spec is Megabit Ethernet and a single antenna. In
some low-end boxes BT is omitted.
As initial distro setup is frequently performed over SSH or an HDMI GUI
app it is important for users to pick a device-tree with the correct
Ethernet PHY spec else connectivity is impossible. To aid this we append
a -gbit suffix to X96-AIR and A95XF3-AIR models using an external Gigabit
PHY, while 10/00 models with internal PHY have no suffix.
NB: At the current time the Realtek 8822CS and MT7668 WiFi/BT modules we
have seen on 'AIR' devices are not supported in the kernel so these are
deliberately omitted. The H96-Max uses a conventional Broadcom module
so has more complete support. For now the boxes have simple HDMI audio
support; wiring up the Headphone socket will be done at a later date.
Changes since v2 series:
- Add Robs binding acks (patches 2/5)
- Add Martin/Piotir's Tested-By's (patches 1/3)
- Reorder Tested-By on patch 9
- Correct 'distinguished' typo in patch 5
- Correct typo in series name/subject
Changes since RFC(v1) series:
- Add Robs binding acks on patches 4/7/8 (patches 2/5 still need acks)
- Rename and rework patches around -gbit (as requested by Neil)
- Correct 'manufacturer' typo on patch 8
- Rebase against v5.18/dt64 branch
Christian Hewitt (9):
arm64: dts: meson: add common SM1 ac2xx dtsi
dt-bindings: arm: amlogic: add X96-AIR bindings
arm64: dts: meson: add initial device-trees for X96-AIR
dt-bindings: vendor-prefixes: add cyx prefix
dt-bindings: arm: amlogic: add A95XF3-AIR bindings
arm64: dts: meson: add initial device-trees for A95XF3-AIR
dt-bindings: vendor-prefixes: add haochuangyi prefix
dt-bindings: arm: amlogic: add H96-Max bindings
arm64: dts: meson: add initial device-tree for H96-Max
.../devicetree/bindings/arm/amlogic.yaml | 5 +
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
arch/arm64/boot/dts/amlogic/Makefile | 5 +
.../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 ++++++++
.../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++
.../boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 300 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-h96-max.dts | 145 +++++++++
.../dts/amlogic/meson-sm1-x96-air-gbit.dts | 133 ++++++++
.../boot/dts/amlogic/meson-sm1-x96-air.dts | 112 +++++++
9 files changed, 941 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
--
2.17.1
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
This series adds support for several popular Amlogic S905X3 (SM1) Android
Set-Top Box devices. Like most Android box devices, they ship in variants
with multiple RAM, eMMC, WiFi and BT configurations. RAM and eMMC are not
something we need to consider to get a working boot, but we do need to get
the correct connectivity spec. Broadly speaking we see boxes with Higher
and Lower spec connectivity; High spec is Gigabit Ethernet and Faster dual
antennna WiFi, and Lower spec is Megabit Ethernet and a single antenna. In
some low-end boxes BT is omitted.
As initial distro setup is frequently performed over SSH or an HDMI GUI
app it is important for users to pick a device-tree with the correct
Ethernet PHY spec else connectivity is impossible. To aid this we append
a -gbit suffix to X96-AIR and A95XF3-AIR models using an external Gigabit
PHY, while 10/00 models with internal PHY have no suffix.
NB: At the current time the Realtek 8822CS and MT7668 WiFi/BT modules we
have seen on 'AIR' devices are not supported in the kernel so these are
deliberately omitted. The H96-Max uses a conventional Broadcom module
so has more complete support. For now the boxes have simple HDMI audio
support; wiring up the Headphone socket will be done at a later date.
Changes since v2 series:
- Add Robs binding acks (patches 2/5)
- Add Martin/Piotir's Tested-By's (patches 1/3)
- Reorder Tested-By on patch 9
- Correct 'distinguished' typo in patch 5
- Correct typo in series name/subject
Changes since RFC(v1) series:
- Add Robs binding acks on patches 4/7/8 (patches 2/5 still need acks)
- Rename and rework patches around -gbit (as requested by Neil)
- Correct 'manufacturer' typo on patch 8
- Rebase against v5.18/dt64 branch
Christian Hewitt (9):
arm64: dts: meson: add common SM1 ac2xx dtsi
dt-bindings: arm: amlogic: add X96-AIR bindings
arm64: dts: meson: add initial device-trees for X96-AIR
dt-bindings: vendor-prefixes: add cyx prefix
dt-bindings: arm: amlogic: add A95XF3-AIR bindings
arm64: dts: meson: add initial device-trees for A95XF3-AIR
dt-bindings: vendor-prefixes: add haochuangyi prefix
dt-bindings: arm: amlogic: add H96-Max bindings
arm64: dts: meson: add initial device-tree for H96-Max
.../devicetree/bindings/arm/amlogic.yaml | 5 +
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
arch/arm64/boot/dts/amlogic/Makefile | 5 +
.../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 ++++++++
.../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++
.../boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 300 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-h96-max.dts | 145 +++++++++
.../dts/amlogic/meson-sm1-x96-air-gbit.dts | 133 ++++++++
.../boot/dts/amlogic/meson-sm1-x96-air.dts | 112 +++++++
9 files changed, 941 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
This series adds support for several popular Amlogic S905X3 (SM1) Android
Set-Top Box devices. Like most Android box devices, they ship in variants
with multiple RAM, eMMC, WiFi and BT configurations. RAM and eMMC are not
something we need to consider to get a working boot, but we do need to get
the correct connectivity spec. Broadly speaking we see boxes with Higher
and Lower spec connectivity; High spec is Gigabit Ethernet and Faster dual
antennna WiFi, and Lower spec is Megabit Ethernet and a single antenna. In
some low-end boxes BT is omitted.
As initial distro setup is frequently performed over SSH or an HDMI GUI
app it is important for users to pick a device-tree with the correct
Ethernet PHY spec else connectivity is impossible. To aid this we append
a -gbit suffix to X96-AIR and A95XF3-AIR models using an external Gigabit
PHY, while 10/00 models with internal PHY have no suffix.
NB: At the current time the Realtek 8822CS and MT7668 WiFi/BT modules we
have seen on 'AIR' devices are not supported in the kernel so these are
deliberately omitted. The H96-Max uses a conventional Broadcom module
so has more complete support. For now the boxes have simple HDMI audio
support; wiring up the Headphone socket will be done at a later date.
Changes since v2 series:
- Add Robs binding acks (patches 2/5)
- Add Martin/Piotir's Tested-By's (patches 1/3)
- Reorder Tested-By on patch 9
- Correct 'distinguished' typo in patch 5
- Correct typo in series name/subject
Changes since RFC(v1) series:
- Add Robs binding acks on patches 4/7/8 (patches 2/5 still need acks)
- Rename and rework patches around -gbit (as requested by Neil)
- Correct 'manufacturer' typo on patch 8
- Rebase against v5.18/dt64 branch
Christian Hewitt (9):
arm64: dts: meson: add common SM1 ac2xx dtsi
dt-bindings: arm: amlogic: add X96-AIR bindings
arm64: dts: meson: add initial device-trees for X96-AIR
dt-bindings: vendor-prefixes: add cyx prefix
dt-bindings: arm: amlogic: add A95XF3-AIR bindings
arm64: dts: meson: add initial device-trees for A95XF3-AIR
dt-bindings: vendor-prefixes: add haochuangyi prefix
dt-bindings: arm: amlogic: add H96-Max bindings
arm64: dts: meson: add initial device-tree for H96-Max
.../devicetree/bindings/arm/amlogic.yaml | 5 +
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
arch/arm64/boot/dts/amlogic/Makefile | 5 +
.../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 ++++++++
.../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++
.../boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 300 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-h96-max.dts | 145 +++++++++
.../dts/amlogic/meson-sm1-x96-air-gbit.dts | 133 ++++++++
.../boot/dts/amlogic/meson-sm1-x96-air.dts | 112 +++++++
9 files changed, 941 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH v3 1/9] arm64: dts: meson: add common SM1 ac2xx dtsi
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add a common dtsi for Android STB devices based on the Amlogic S905X3
(AC213/AC214) and S905D3 (AC201/AC202) reference designs. The dtsi is
loosely based on the existing SEI610 device-tree.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY
---
.../boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 300 ++++++++++++++++++
1 file changed, 300 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
new file mode 100644
index 000000000000..46a34731f7e2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ *
+ * AC200/AC202 = S905D3
+ * AC213/AC214 = S905X3
+ *
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ vddcpu: regulator-vddcpu {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <690000>;
+ regulator-max-microvolt = <1050000>;
+
+ vin-supply = <&dc_in>;
+
+ pwms = <&pwm_AO_cd 1 1500 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddio_ao1v8: regulator-vddio_ao1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_AO_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_ao_a_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+
+ non-removable;
+ disable-wp;
+
+ /* WiFi firmware requires power to be kept while in suspend */
+ keep-power-in-suspend;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD Card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ /* CRC errors are observed at 50MHz */
+ max-frequency = <35000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 1/9] arm64: dts: meson: add common SM1 ac2xx dtsi
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add a common dtsi for Android STB devices based on the Amlogic S905X3
(AC213/AC214) and S905D3 (AC201/AC202) reference designs. The dtsi is
loosely based on the existing SEI610 device-tree.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY
---
.../boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 300 ++++++++++++++++++
1 file changed, 300 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
new file mode 100644
index 000000000000..46a34731f7e2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ *
+ * AC200/AC202 = S905D3
+ * AC213/AC214 = S905X3
+ *
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ vddcpu: regulator-vddcpu {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <690000>;
+ regulator-max-microvolt = <1050000>;
+
+ vin-supply = <&dc_in>;
+
+ pwms = <&pwm_AO_cd 1 1500 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddio_ao1v8: regulator-vddio_ao1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_AO_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_ao_a_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+
+ non-removable;
+ disable-wp;
+
+ /* WiFi firmware requires power to be kept while in suspend */
+ keep-power-in-suspend;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD Card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ /* CRC errors are observed at 50MHz */
+ max-frequency = <35000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 1/9] arm64: dts: meson: add common SM1 ac2xx dtsi
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add a common dtsi for Android STB devices based on the Amlogic S905X3
(AC213/AC214) and S905D3 (AC201/AC202) reference designs. The dtsi is
loosely based on the existing SEI610 device-tree.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY
---
.../boot/dts/amlogic/meson-sm1-ac2xx.dtsi | 300 ++++++++++++++++++
1 file changed, 300 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
new file mode 100644
index 000000000000..46a34731f7e2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ *
+ * AC200/AC202 = S905D3
+ * AC213/AC214 = S905X3
+ *
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ vddcpu: regulator-vddcpu {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <690000>;
+ regulator-max-microvolt = <1050000>;
+
+ vin-supply = <&dc_in>;
+
+ pwms = <&pwm_AO_cd 1 1500 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddio_ao1v8: regulator-vddio_ao1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_AO_ab {
+ status = "okay";
+ pinctrl-0 = <&pwm_ao_a_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+
+ non-removable;
+ disable-wp;
+
+ /* WiFi firmware requires power to be kept while in suspend */
+ keep-power-in-suspend;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD Card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ /* CRC errors are observed at 50MHz */
+ max-frequency = <35000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 2/9] dt-bindings: arm: amlogic: add X96-AIR bindings
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add board bindings for the Amediatech X96-AIR STB which ships with
model variants distiguished by Ethernet configuration: models using
an external Gigabit PHY have a -gbit suffix, while models using an
internal 10/100 PHY have no suffix.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 31df120d73b0..b5b995941d3b 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -170,6 +170,8 @@ properties:
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
items:
- enum:
+ - amediatech,x96-air
+ - amediatech,x96-air-gbit
- bananapi,bpi-m5
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 2/9] dt-bindings: arm: amlogic: add X96-AIR bindings
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add board bindings for the Amediatech X96-AIR STB which ships with
model variants distiguished by Ethernet configuration: models using
an external Gigabit PHY have a -gbit suffix, while models using an
internal 10/100 PHY have no suffix.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 31df120d73b0..b5b995941d3b 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -170,6 +170,8 @@ properties:
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
items:
- enum:
+ - amediatech,x96-air
+ - amediatech,x96-air-gbit
- bananapi,bpi-m5
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 2/9] dt-bindings: arm: amlogic: add X96-AIR bindings
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add board bindings for the Amediatech X96-AIR STB which ships with
model variants distiguished by Ethernet configuration: models using
an external Gigabit PHY have a -gbit suffix, while models using an
internal 10/100 PHY have no suffix.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 31df120d73b0..b5b995941d3b 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -170,6 +170,8 @@ properties:
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
items:
- enum:
+ - amediatech,x96-air
+ - amediatech,x96-air-gbit
- bananapi,bpi-m5
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 3/9] arm64: dts: meson: add initial device-trees for X96-AIR
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The Amediatek X96-AIR is based on Amlogic S905X3 reference board
designs and ships in multiple configurations:
– 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
– 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
...
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 2x USB 2.0 inc. OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
The device-tree with -gbit suffix supports models with Gigabit
Ethernet, and the device-tree with no suffix supports models
with 10/100 Ethernet.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY
Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> # X96-Air with 10/100 Eth
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-sm1-x96-air-gbit.dts | 133 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-x96-air.dts | 112 +++++++++++++++
3 files changed, 247 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5148cd9e5146..1c0e554f54fc 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -56,4 +56,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
new file mode 100644
index 000000000000..7e1a74046ba5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "amediatech,x96-air-gbit", "amlogic,sm1";
+ model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "X96-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-x96max";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
new file mode 100644
index 000000000000..cd93d798f2a3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "amediatech,x96-air", "amlogic,sm1";
+ model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "X96-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 3/9] arm64: dts: meson: add initial device-trees for X96-AIR
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The Amediatek X96-AIR is based on Amlogic S905X3 reference board
designs and ships in multiple configurations:
– 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
– 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
...
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 2x USB 2.0 inc. OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
The device-tree with -gbit suffix supports models with Gigabit
Ethernet, and the device-tree with no suffix supports models
with 10/100 Ethernet.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY
Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> # X96-Air with 10/100 Eth
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-sm1-x96-air-gbit.dts | 133 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-x96-air.dts | 112 +++++++++++++++
3 files changed, 247 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5148cd9e5146..1c0e554f54fc 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -56,4 +56,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
new file mode 100644
index 000000000000..7e1a74046ba5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "amediatech,x96-air-gbit", "amlogic,sm1";
+ model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "X96-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-x96max";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
new file mode 100644
index 000000000000..cd93d798f2a3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "amediatech,x96-air", "amlogic,sm1";
+ model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "X96-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 3/9] arm64: dts: meson: add initial device-trees for X96-AIR
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The Amediatek X96-AIR is based on Amlogic S905X3 reference board
designs and ships in multiple configurations:
– 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
– 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
...
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 2x USB 2.0 inc. OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
The device-tree with -gbit suffix supports models with Gigabit
Ethernet, and the device-tree with no suffix supports models
with 10/100 Ethernet.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY
Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> # X96-Air with 10/100 Eth
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-sm1-x96-air-gbit.dts | 133 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-x96-air.dts | 112 +++++++++++++++
3 files changed, 247 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5148cd9e5146..1c0e554f54fc 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -56,4 +56,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
new file mode 100644
index 000000000000..7e1a74046ba5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "amediatech,x96-air-gbit", "amlogic,sm1";
+ model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "X96-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-x96max";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
new file mode 100644
index 000000000000..cd93d798f2a3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "amediatech,x96-air", "amlogic,sm1";
+ model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "X96-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 4/9] dt-bindings: vendor-prefixes: add cyx prefix
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Shenzhen CYX Industrial Co., Ltd are a manufacturer of Android
Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eb8ab0d82198..c9202a101d71 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -281,6 +281,8 @@ patternProperties:
description: CUI Devices
"^cypress,.*":
description: Cypress Semiconductor Corporation
+ "^cyx,.*":
+ description: Shenzhen CYX Industrial Co., Ltd
"^cznic,.*":
description: CZ.NIC, z.s.p.o.
"^dallas,.*":
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 4/9] dt-bindings: vendor-prefixes: add cyx prefix
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Shenzhen CYX Industrial Co., Ltd are a manufacturer of Android
Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eb8ab0d82198..c9202a101d71 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -281,6 +281,8 @@ patternProperties:
description: CUI Devices
"^cypress,.*":
description: Cypress Semiconductor Corporation
+ "^cyx,.*":
+ description: Shenzhen CYX Industrial Co., Ltd
"^cznic,.*":
description: CZ.NIC, z.s.p.o.
"^dallas,.*":
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 4/9] dt-bindings: vendor-prefixes: add cyx prefix
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Shenzhen CYX Industrial Co., Ltd are a manufacturer of Android
Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eb8ab0d82198..c9202a101d71 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -281,6 +281,8 @@ patternProperties:
description: CUI Devices
"^cypress,.*":
description: Cypress Semiconductor Corporation
+ "^cyx,.*":
+ description: Shenzhen CYX Industrial Co., Ltd
"^cznic,.*":
description: CZ.NIC, z.s.p.o.
"^dallas,.*":
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add board bindings for the CYX A95XF3-AIR set-top box which ships
with model variants distinguished by Ethernet configuration: models
using external Gigabit PHY have a -gbit suffix, while models using
an internal 10/100 PHY have no suffix.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index b5b995941d3b..2027ce81a834 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -173,6 +173,8 @@ properties:
- amediatech,x96-air
- amediatech,x96-air-gbit
- bananapi,bpi-m5
+ - cyx,a95xf3-air
+ - cyx,a95xf3-air-gbit
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
- khadas,vim3l
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add board bindings for the CYX A95XF3-AIR set-top box which ships
with model variants distinguished by Ethernet configuration: models
using external Gigabit PHY have a -gbit suffix, while models using
an internal 10/100 PHY have no suffix.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index b5b995941d3b..2027ce81a834 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -173,6 +173,8 @@ properties:
- amediatech,x96-air
- amediatech,x96-air-gbit
- bananapi,bpi-m5
+ - cyx,a95xf3-air
+ - cyx,a95xf3-air-gbit
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
- khadas,vim3l
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add board bindings for the CYX A95XF3-AIR set-top box which ships
with model variants distinguished by Ethernet configuration: models
using external Gigabit PHY have a -gbit suffix, while models using
an internal 10/100 PHY have no suffix.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index b5b995941d3b..2027ce81a834 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -173,6 +173,8 @@ properties:
- amediatech,x96-air
- amediatech,x96-air-gbit
- bananapi,bpi-m5
+ - cyx,a95xf3-air
+ - cyx,a95xf3-air-gbit
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
- khadas,vim3l
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The CYX A95XF3-AIR is based on Amlogic S905X3 reference board
designs and ships in multiple configurations:
– 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
...
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 1x USB 2.0 OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
- Multicolour case LED 'arc'
The device-tree with -gbit suffix supports models with Gigabit
Ethernet, and the device-tree with no suffix supports models
with 10/100 Ethernet.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++++++++++
3 files changed, 239 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 1c0e554f54fc..e87adc6593df 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -51,6 +51,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
new file mode 100644
index 000000000000..d1debccdc1c2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1";
+ model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "A95XF3-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
new file mode 100644
index 000000000000..c94f2870b78b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "cyx,a95xf3-air", "amlogic,sm1";
+ model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "A95XF3-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The CYX A95XF3-AIR is based on Amlogic S905X3 reference board
designs and ships in multiple configurations:
– 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
...
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 1x USB 2.0 OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
- Multicolour case LED 'arc'
The device-tree with -gbit suffix supports models with Gigabit
Ethernet, and the device-tree with no suffix supports models
with 10/100 Ethernet.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++++++++++
3 files changed, 239 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 1c0e554f54fc..e87adc6593df 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -51,6 +51,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
new file mode 100644
index 000000000000..d1debccdc1c2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1";
+ model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "A95XF3-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
new file mode 100644
index 000000000000..c94f2870b78b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "cyx,a95xf3-air", "amlogic,sm1";
+ model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "A95XF3-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The CYX A95XF3-AIR is based on Amlogic S905X3 reference board
designs and ships in multiple configurations:
– 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
– 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
...
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 1x USB 2.0 OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
- Multicolour case LED 'arc'
The device-tree with -gbit suffix supports models with Gigabit
Ethernet, and the device-tree with no suffix supports models
with 10/100 Ethernet.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 ++++++++++++++++++
.../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++++++++++
3 files changed, 239 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 1c0e554f54fc..e87adc6593df 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -51,6 +51,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
new file mode 100644
index 000000000000..d1debccdc1c2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1";
+ model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "A95XF3-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
new file mode 100644
index 000000000000..c94f2870b78b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "cyx,a95xf3-air", "amlogic,sm1";
+ model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "A95XF3-AIR";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Shenzhen Haochuangyi Technology Co.,Ltd are a manufacturer of Android
Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index c9202a101d71..f4160ee3b5df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -485,6 +485,8 @@ patternProperties:
deprecated: true
"^hannstar,.*":
description: HannStar Display Corporation
+ "^haochuangyi,.*":
+ description: Shenzhen Haochuangyi Technology Co.,Ltd
"^haoyu,.*":
description: Haoyu Microelectronic Co. Ltd.
"^hardkernel,.*":
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Shenzhen Haochuangyi Technology Co.,Ltd are a manufacturer of Android
Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index c9202a101d71..f4160ee3b5df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -485,6 +485,8 @@ patternProperties:
deprecated: true
"^hannstar,.*":
description: HannStar Display Corporation
+ "^haochuangyi,.*":
+ description: Shenzhen Haochuangyi Technology Co.,Ltd
"^haoyu,.*":
description: Haoyu Microelectronic Co. Ltd.
"^hardkernel,.*":
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Shenzhen Haochuangyi Technology Co.,Ltd are a manufacturer of Android
Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index c9202a101d71..f4160ee3b5df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -485,6 +485,8 @@ patternProperties:
deprecated: true
"^hannstar,.*":
description: HannStar Display Corporation
+ "^haochuangyi,.*":
+ description: Shenzhen Haochuangyi Technology Co.,Ltd
"^haoyu,.*":
description: Haoyu Microelectronic Co. Ltd.
"^hardkernel,.*":
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 8/9] dt-bindings: arm: amlogic: add H96-Max bindings
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add the board binding for the Haochuangyi H96-Max STB device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 2027ce81a834..a073a959232c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -177,6 +177,7 @@ properties:
- cyx,a95xf3-air-gbit
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
+ - haochuangyi,h96-max
- khadas,vim3l
- seirobotics,sei610
- const: amlogic,sm1
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 8/9] dt-bindings: arm: amlogic: add H96-Max bindings
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add the board binding for the Haochuangyi H96-Max STB device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 2027ce81a834..a073a959232c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -177,6 +177,7 @@ properties:
- cyx,a95xf3-air-gbit
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
+ - haochuangyi,h96-max
- khadas,vim3l
- seirobotics,sei610
- const: amlogic,sm1
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 8/9] dt-bindings: arm: amlogic: add H96-Max bindings
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
Add the board binding for the Haochuangyi H96-Max STB device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 2027ce81a834..a073a959232c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -177,6 +177,7 @@ properties:
- cyx,a95xf3-air-gbit
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
+ - haochuangyi,h96-max
- khadas,vim3l
- seirobotics,sei610
- const: amlogic,sm1
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 9/9] arm64: dts: meson: add initial device-tree for H96-Max
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 2:27 ` Christian Hewitt
-1 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The Haochuangyi H96-Max is based on the Amlogic S905X3 reference
design with the following specs:
- 4GB DDR4 RAM
- 32/64/128GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- 1x USB 2.0 OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Benoit Masson <yahoo@perenite.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-sm1-h96-max.dts | 145 ++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index e87adc6593df..868d74044072 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
new file mode 100644
index 000000000000..0f6660e68e72
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "haochuangyi,h96-max", "amlogic,sm1";
+ model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "H96-MAX";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_A {
+ status = "okay";
+
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 9/9] arm64: dts: meson: add initial device-tree for H96-Max
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The Haochuangyi H96-Max is based on the Amlogic S905X3 reference
design with the following specs:
- 4GB DDR4 RAM
- 32/64/128GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- 1x USB 2.0 OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Benoit Masson <yahoo@perenite.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-sm1-h96-max.dts | 145 ++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index e87adc6593df..868d74044072 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
new file mode 100644
index 000000000000..0f6660e68e72
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "haochuangyi,h96-max", "amlogic,sm1";
+ model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "H96-MAX";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_A {
+ status = "okay";
+
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH v3 9/9] arm64: dts: meson: add initial device-tree for H96-Max
@ 2022-01-12 2:27 ` Christian Hewitt
0 siblings, 0 replies; 33+ messages in thread
From: Christian Hewitt @ 2022-01-12 2:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Kevin Hilman, Neil Armstrong,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Cc: Christian Hewitt, Benoit Masson
The Haochuangyi H96-Max is based on the Amlogic S905X3 reference
design with the following specs:
- 4GB DDR4 RAM
- 32/64/128GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- 1x USB 2.0 OTG port
- 1x USB 3.0 port
- IR receiver
- 1x micro SD card slot (internal)
- 1x Reset/Update button (in AV jack)
- 7-segment VFD
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Benoit Masson <yahoo@perenite.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-sm1-h96-max.dts | 145 ++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index e87adc6593df..868d74044072 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
new file mode 100644
index 000000000000..0f6660e68e72
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "haochuangyi,h96-max", "amlogic,sm1";
+ model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max";
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "H96-MAX";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+
+ rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_A {
+ status = "okay";
+
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 33+ messages in thread
* Re: [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices
2022-01-12 2:27 ` Christian Hewitt
(?)
@ 2022-01-12 8:28 ` Neil Armstrong
-1 siblings, 0 replies; 33+ messages in thread
From: Neil Armstrong @ 2022-01-12 8:28 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, linux-kernel, Mark Rutland,
linux-amlogic, Kevin Hilman, Rob Herring, Christian Hewitt
Cc: Neil Armstrong, Benoit Masson
Hi,
On Wed, 12 Jan 2022 02:27:04 +0000, Christian Hewitt wrote:
> This series adds support for several popular Amlogic S905X3 (SM1) Android
> Set-Top Box devices. Like most Android box devices, they ship in variants
> with multiple RAM, eMMC, WiFi and BT configurations. RAM and eMMC are not
> something we need to consider to get a working boot, but we do need to get
> the correct connectivity spec. Broadly speaking we see boxes with Higher
> and Lower spec connectivity; High spec is Gigabit Ethernet and Faster dual
> antennna WiFi, and Lower spec is Megabit Ethernet and a single antenna. In
> some low-end boxes BT is omitted.
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.18/dt64)
[1/9] arm64: dts: meson: add common SM1 ac2xx dtsi
https://git.kernel.org/amlogic/c/b5a03ecec30c1a71d51de3e73a2e7ab23c3ddeb6
[2/9] dt-bindings: arm: amlogic: add X96-AIR bindings
https://git.kernel.org/amlogic/c/d2ecf5ae59c8eef9fe2ad20d83977c2889646d4c
[3/9] arm64: dts: meson: add initial device-trees for X96-AIR
https://git.kernel.org/amlogic/c/37875d9dcb42d489ba28518b50fed0b2ba768b03
[4/9] dt-bindings: vendor-prefixes: add cyx prefix
https://git.kernel.org/amlogic/c/3dbabb9ac746ab01c71aa019c58a2e0cc6eafe1c
[5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings
https://git.kernel.org/amlogic/c/bc7811bd4e884bbc21cc7b7031cb7c297662db9c
[6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR
https://git.kernel.org/amlogic/c/8b749a0205bd41cafae37e878fd4a1b57b7b24f3
[7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix
https://git.kernel.org/amlogic/c/bf510ace20ac153946d6d0ab6305dd8aa52eec6c
[8/9] dt-bindings: arm: amlogic: add H96-Max bindings
https://git.kernel.org/amlogic/c/2ca889b1201625d36efcd51d25371d937a6a0b8f
[9/9] arm64: dts: meson: add initial device-tree for H96-Max
https://git.kernel.org/amlogic/c/ac7b4433714a37e2c4b61acc6ce9b4538175e836
--
Neil
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices
@ 2022-01-12 8:28 ` Neil Armstrong
0 siblings, 0 replies; 33+ messages in thread
From: Neil Armstrong @ 2022-01-12 8:28 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, linux-kernel, Mark Rutland,
linux-amlogic, Kevin Hilman, Rob Herring, Christian Hewitt
Cc: Neil Armstrong, Benoit Masson
Hi,
On Wed, 12 Jan 2022 02:27:04 +0000, Christian Hewitt wrote:
> This series adds support for several popular Amlogic S905X3 (SM1) Android
> Set-Top Box devices. Like most Android box devices, they ship in variants
> with multiple RAM, eMMC, WiFi and BT configurations. RAM and eMMC are not
> something we need to consider to get a working boot, but we do need to get
> the correct connectivity spec. Broadly speaking we see boxes with Higher
> and Lower spec connectivity; High spec is Gigabit Ethernet and Faster dual
> antennna WiFi, and Lower spec is Megabit Ethernet and a single antenna. In
> some low-end boxes BT is omitted.
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.18/dt64)
[1/9] arm64: dts: meson: add common SM1 ac2xx dtsi
https://git.kernel.org/amlogic/c/b5a03ecec30c1a71d51de3e73a2e7ab23c3ddeb6
[2/9] dt-bindings: arm: amlogic: add X96-AIR bindings
https://git.kernel.org/amlogic/c/d2ecf5ae59c8eef9fe2ad20d83977c2889646d4c
[3/9] arm64: dts: meson: add initial device-trees for X96-AIR
https://git.kernel.org/amlogic/c/37875d9dcb42d489ba28518b50fed0b2ba768b03
[4/9] dt-bindings: vendor-prefixes: add cyx prefix
https://git.kernel.org/amlogic/c/3dbabb9ac746ab01c71aa019c58a2e0cc6eafe1c
[5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings
https://git.kernel.org/amlogic/c/bc7811bd4e884bbc21cc7b7031cb7c297662db9c
[6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR
https://git.kernel.org/amlogic/c/8b749a0205bd41cafae37e878fd4a1b57b7b24f3
[7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix
https://git.kernel.org/amlogic/c/bf510ace20ac153946d6d0ab6305dd8aa52eec6c
[8/9] dt-bindings: arm: amlogic: add H96-Max bindings
https://git.kernel.org/amlogic/c/2ca889b1201625d36efcd51d25371d937a6a0b8f
[9/9] arm64: dts: meson: add initial device-tree for H96-Max
https://git.kernel.org/amlogic/c/ac7b4433714a37e2c4b61acc6ce9b4538175e836
--
Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices
@ 2022-01-12 8:28 ` Neil Armstrong
0 siblings, 0 replies; 33+ messages in thread
From: Neil Armstrong @ 2022-01-12 8:28 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, linux-kernel, Mark Rutland,
linux-amlogic, Kevin Hilman, Rob Herring, Christian Hewitt
Cc: Neil Armstrong, Benoit Masson
Hi,
On Wed, 12 Jan 2022 02:27:04 +0000, Christian Hewitt wrote:
> This series adds support for several popular Amlogic S905X3 (SM1) Android
> Set-Top Box devices. Like most Android box devices, they ship in variants
> with multiple RAM, eMMC, WiFi and BT configurations. RAM and eMMC are not
> something we need to consider to get a working boot, but we do need to get
> the correct connectivity spec. Broadly speaking we see boxes with Higher
> and Lower spec connectivity; High spec is Gigabit Ethernet and Faster dual
> antennna WiFi, and Lower spec is Megabit Ethernet and a single antenna. In
> some low-end boxes BT is omitted.
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.18/dt64)
[1/9] arm64: dts: meson: add common SM1 ac2xx dtsi
https://git.kernel.org/amlogic/c/b5a03ecec30c1a71d51de3e73a2e7ab23c3ddeb6
[2/9] dt-bindings: arm: amlogic: add X96-AIR bindings
https://git.kernel.org/amlogic/c/d2ecf5ae59c8eef9fe2ad20d83977c2889646d4c
[3/9] arm64: dts: meson: add initial device-trees for X96-AIR
https://git.kernel.org/amlogic/c/37875d9dcb42d489ba28518b50fed0b2ba768b03
[4/9] dt-bindings: vendor-prefixes: add cyx prefix
https://git.kernel.org/amlogic/c/3dbabb9ac746ab01c71aa019c58a2e0cc6eafe1c
[5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings
https://git.kernel.org/amlogic/c/bc7811bd4e884bbc21cc7b7031cb7c297662db9c
[6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR
https://git.kernel.org/amlogic/c/8b749a0205bd41cafae37e878fd4a1b57b7b24f3
[7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix
https://git.kernel.org/amlogic/c/bf510ace20ac153946d6d0ab6305dd8aa52eec6c
[8/9] dt-bindings: arm: amlogic: add H96-Max bindings
https://git.kernel.org/amlogic/c/2ca889b1201625d36efcd51d25371d937a6a0b8f
[9/9] arm64: dts: meson: add initial device-tree for H96-Max
https://git.kernel.org/amlogic/c/ac7b4433714a37e2c4b61acc6ce9b4538175e836
--
Neil
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2022-01-12 8:30 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-12 2:27 [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 1/9] arm64: dts: meson: add common SM1 ac2xx dtsi Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 2/9] dt-bindings: arm: amlogic: add X96-AIR bindings Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 3/9] arm64: dts: meson: add initial device-trees for X96-AIR Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 4/9] dt-bindings: vendor-prefixes: add cyx prefix Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 8/9] dt-bindings: arm: amlogic: add H96-Max bindings Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` [PATCH v3 9/9] arm64: dts: meson: add initial device-tree for H96-Max Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 2:27 ` Christian Hewitt
2022-01-12 8:28 ` [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices Neil Armstrong
2022-01-12 8:28 ` Neil Armstrong
2022-01-12 8:28 ` Neil Armstrong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.