All of lore.kernel.org
 help / color / mirror / Atom feed
From: Francisco Iglesias <francisco.iglesias@xilinx.com>
To: <qemu-devel@nongnu.org>
Cc: edgar.iglesias@xilinx.com, peter.maydell@linaro.org,
	frasse.iglesias@gmail.com, alistair@alistair23.me,
	alistair23@gmail.com, philmd@redhat.com
Subject: [PATCH v6 08/12] hw/arm/xlnx-versal: Connect the OSPI flash memory controller model
Date: Fri, 14 Jan 2022 15:28:37 +0000	[thread overview]
Message-ID: <20220114152841.1740-9-francisco.iglesias@xilinx.com> (raw)
In-Reply-To: <20220114152841.1740-1-francisco.iglesias@xilinx.com>

Connect the OSPI flash memory controller model (including the source and
destination DMA).

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/xlnx-versal.c         | 93 ++++++++++++++++++++++++++++++++++++++++++++
 include/hw/arm/xlnx-versal.h | 20 ++++++++++
 2 files changed, 113 insertions(+)

diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index c8c0c102c7..ab58bebfd2 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -28,6 +28,7 @@
 #define GEM_REVISION        0x40070106
 
 #define VERSAL_NUM_PMC_APB_IRQS 3
+#define NUM_OSPI_IRQ_LINES 3
 
 static void versal_create_apu_cpus(Versal *s)
 {
@@ -412,6 +413,97 @@ static void versal_create_pmc_iou_slcr(Versal *s, qemu_irq *pic)
                        qdev_get_gpio_in(DEVICE(&s->pmc.apb_irq_orgate), 2));
 }
 
+static void versal_create_ospi(Versal *s, qemu_irq *pic)
+{
+    SysBusDevice *sbd;
+    MemoryRegion *mr_dac;
+    qemu_irq ospi_mux_sel;
+    DeviceState *orgate;
+
+    memory_region_init(&s->pmc.iou.ospi.linear_mr, OBJECT(s),
+                       "versal-ospi-linear-mr" , MM_PMC_OSPI_DAC_SIZE);
+
+    object_initialize_child(OBJECT(s), "versal-ospi", &s->pmc.iou.ospi.ospi,
+                            TYPE_XILINX_VERSAL_OSPI);
+
+    mr_dac = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->pmc.iou.ospi.ospi), 1);
+    memory_region_add_subregion(&s->pmc.iou.ospi.linear_mr, 0x0, mr_dac);
+
+    /* Create the OSPI destination DMA */
+    object_initialize_child(OBJECT(s), "versal-ospi-dma-dst",
+                            &s->pmc.iou.ospi.dma_dst,
+                            TYPE_XLNX_CSU_DMA);
+
+    object_property_set_link(OBJECT(&s->pmc.iou.ospi.dma_dst),
+                            "dma", OBJECT(get_system_memory()),
+                             &error_abort);
+
+    sbd = SYS_BUS_DEVICE(&s->pmc.iou.ospi.dma_dst);
+    sysbus_realize(sbd, &error_fatal);
+
+    memory_region_add_subregion(&s->mr_ps, MM_PMC_OSPI_DMA_DST,
+                                sysbus_mmio_get_region(sbd, 0));
+
+    /* Create the OSPI source DMA */
+    object_initialize_child(OBJECT(s), "versal-ospi-dma-src",
+                            &s->pmc.iou.ospi.dma_src,
+                            TYPE_XLNX_CSU_DMA);
+
+    object_property_set_bool(OBJECT(&s->pmc.iou.ospi.dma_src), "is-dst",
+                             false, &error_abort);
+
+    object_property_set_link(OBJECT(&s->pmc.iou.ospi.dma_src),
+                            "dma", OBJECT(mr_dac), &error_abort);
+
+    object_property_set_link(OBJECT(&s->pmc.iou.ospi.dma_src),
+                            "stream-connected-dma",
+                             OBJECT(&s->pmc.iou.ospi.dma_dst),
+                             &error_abort);
+
+    sbd = SYS_BUS_DEVICE(&s->pmc.iou.ospi.dma_src);
+    sysbus_realize(sbd, &error_fatal);
+
+    memory_region_add_subregion(&s->mr_ps, MM_PMC_OSPI_DMA_SRC,
+                                sysbus_mmio_get_region(sbd, 0));
+
+    /* Realize the OSPI */
+    object_property_set_link(OBJECT(&s->pmc.iou.ospi.ospi), "dma-src",
+                             OBJECT(&s->pmc.iou.ospi.dma_src), &error_abort);
+
+    sbd = SYS_BUS_DEVICE(&s->pmc.iou.ospi.ospi);
+    sysbus_realize(sbd, &error_fatal);
+
+    memory_region_add_subregion(&s->mr_ps, MM_PMC_OSPI,
+                                sysbus_mmio_get_region(sbd, 0));
+
+    memory_region_add_subregion(&s->mr_ps, MM_PMC_OSPI_DAC,
+                                &s->pmc.iou.ospi.linear_mr);
+
+    /* ospi_mux_sel */
+    ospi_mux_sel = qdev_get_gpio_in_named(DEVICE(&s->pmc.iou.ospi.ospi),
+                                          "ospi-mux-sel", 0);
+    qdev_connect_gpio_out_named(DEVICE(&s->pmc.iou.slcr), "ospi-mux-sel", 0,
+                                ospi_mux_sel);
+
+    /* OSPI irq */
+    object_initialize_child(OBJECT(s), "ospi-irq-orgate",
+                            &s->pmc.iou.ospi.irq_orgate, TYPE_OR_IRQ);
+    object_property_set_int(OBJECT(&s->pmc.iou.ospi.irq_orgate),
+                            "num-lines", NUM_OSPI_IRQ_LINES, &error_fatal);
+
+    orgate = DEVICE(&s->pmc.iou.ospi.irq_orgate);
+    qdev_realize(orgate, NULL, &error_fatal);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pmc.iou.ospi.ospi), 0,
+                       qdev_get_gpio_in(orgate, 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pmc.iou.ospi.dma_src), 0,
+                       qdev_get_gpio_in(orgate, 1));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pmc.iou.ospi.dma_dst), 0,
+                       qdev_get_gpio_in(orgate, 2));
+
+    qdev_connect_gpio_out(orgate, 0, pic[VERSAL_OSPI_IRQ]);
+}
+
 /* This takes the board allocated linear DDR memory and creates aliases
  * for each split DDR range/aperture on the Versal address map.
  */
@@ -552,6 +644,7 @@ static void versal_realize(DeviceState *dev, Error **errp)
     versal_create_bbram(s, pic);
     versal_create_efuse(s, pic);
     versal_create_pmc_iou_slcr(s, pic);
+    versal_create_ospi(s, pic);
     versal_map_ddr(s);
     versal_unimp(s);
 
diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
index 811df73350..1b5ad4de80 100644
--- a/include/hw/arm/xlnx-versal.h
+++ b/include/hw/arm/xlnx-versal.h
@@ -26,6 +26,8 @@
 #include "hw/misc/xlnx-versal-xramc.h"
 #include "hw/nvram/xlnx-bbram.h"
 #include "hw/nvram/xlnx-versal-efuse.h"
+#include "hw/ssi/xlnx-versal-ospi.h"
+#include "hw/dma/xlnx_csu_dma.h"
 #include "hw/misc/xlnx-versal-pmc-iou-slcr.h"
 
 #define TYPE_XLNX_VERSAL "xlnx-versal"
@@ -80,6 +82,14 @@ struct Versal {
         struct {
             SDHCIState sd[XLNX_VERSAL_NR_SDS];
             XlnxVersalPmcIouSlcr slcr;
+
+            struct {
+                XlnxVersalOspi ospi;
+                XlnxCSUDMA dma_src;
+                XlnxCSUDMA dma_dst;
+                MemoryRegion linear_mr;
+                qemu_or_irq irq_orgate;
+            } ospi;
         } iou;
 
         XlnxZynqMPRTC rtc;
@@ -116,6 +126,7 @@ struct Versal {
 #define VERSAL_ADMA_IRQ_0          60
 #define VERSAL_XRAM_IRQ_0          79
 #define VERSAL_PMC_APB_IRQ         121
+#define VERSAL_OSPI_IRQ            124
 #define VERSAL_SD0_IRQ_0           126
 #define VERSAL_EFUSE_IRQ           139
 #define VERSAL_RTC_ALARM_IRQ       142
@@ -184,6 +195,15 @@ struct Versal {
 #define MM_PMC_PMC_IOU_SLCR         0xf1060000
 #define MM_PMC_PMC_IOU_SLCR_SIZE    0x10000
 
+#define MM_PMC_OSPI                 0xf1010000
+#define MM_PMC_OSPI_SIZE            0x10000
+
+#define MM_PMC_OSPI_DAC             0xc0000000
+#define MM_PMC_OSPI_DAC_SIZE        0x20000000
+
+#define MM_PMC_OSPI_DMA_DST         0xf1011800
+#define MM_PMC_OSPI_DMA_SRC         0xf1011000
+
 #define MM_PMC_SD0                  0xf1040000U
 #define MM_PMC_SD0_SIZE             0x10000
 #define MM_PMC_BBRAM_CTRL           0xf11f0000
-- 
2.11.0



  parent reply	other threads:[~2022-01-14 15:43 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-14 15:28 [PATCH v6 00/12] Xilinx Versal's PMC SLCR and OSPI support Francisco Iglesias
2022-01-14 15:28 ` [PATCH v6 01/12] hw/misc: Add a model of Versal's PMC SLCR Francisco Iglesias
2022-01-18 21:58   ` Luc Michel
2022-01-14 15:28 ` [PATCH v6 02/12] hw/arm/xlnx-versal: 'Or' the interrupts from the BBRAM and RTC models Francisco Iglesias
2022-01-18 21:58   ` Luc Michel
2022-01-14 15:28 ` [PATCH v6 03/12] hw/arm/xlnx-versal: Connect Versal's PMC SLCR Francisco Iglesias
2022-01-18 21:56   ` Luc Michel
2022-01-14 15:28 ` [PATCH v6 04/12] include/hw/dma/xlnx_csu_dma: Add in missing includes in the header Francisco Iglesias
2022-01-18 21:59   ` Luc Michel
2022-01-14 15:28 ` [PATCH v6 05/12] hw/dma: Add the DMA control interface Francisco Iglesias
2022-01-18 22:01   ` Luc Michel
2022-01-21 15:46     ` Francisco Iglesias
2022-01-14 15:28 ` [PATCH v6 06/12] hw/dma/xlnx_csu_dma: Implement " Francisco Iglesias
2022-01-14 15:28 ` [PATCH v6 07/12] hw/ssi: Add a model of Xilinx Versal's OSPI flash memory controller Francisco Iglesias
2022-01-18 21:46   ` Luc Michel
2022-01-21 15:45     ` Francisco Iglesias
2022-01-14 15:28 ` Francisco Iglesias [this message]
2022-01-14 15:28 ` [PATCH v6 09/12] hw/block/m25p80: Add support for Micron Xccela flash mt35xu01g Francisco Iglesias
2022-01-14 15:28 ` [PATCH v6 10/12] hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI Francisco Iglesias
2022-01-14 15:28 ` [PATCH v6 11/12] MAINTAINERS: Add an entry for Xilinx Versal OSPI Francisco Iglesias
2022-01-14 15:28 ` [PATCH v6 12/12] docs/devel: Add documentation for the DMA control interface Francisco Iglesias

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220114152841.1740-9-francisco.iglesias@xilinx.com \
    --to=francisco.iglesias@xilinx.com \
    --cc=alistair23@gmail.com \
    --cc=alistair@alistair23.me \
    --cc=edgar.iglesias@xilinx.com \
    --cc=frasse.iglesias@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.