[PATCH v2 07/16] passage: spl: Support adding the dtb to the passage bloblist

[Simon Glass <sjg@chromium.org>]

Add an option for SPL to add a devicetree to the passage bloblist, so
SPL can provide the devicetree to U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

(no changes since v1)

 common/Kconfig   | 20 ++++++++++++++++++++
 common/spl/spl.c | 44 ++++++++++++++++++++++++++++++++++++++++++--
 include/spl.h    |  2 ++
 3 files changed, 64 insertions(+), 2 deletions(-)

diff --git a/common/Kconfig b/common/Kconfig
index 59783d66cb8..bf6bff22e71 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -881,6 +881,26 @@ config SPL_PASSAGE_IN
 	  firmware phases to communicate state and settings to following
 	  phases.
 
+config SPL_PASSAGE_OUT
+	bool "Support the standard-passage protocol in SPL (out)"
+	depends on SPL_BLOBLIST
+	default y if PASSAGE_IN
+	help
+	  This enables a standard protocol for entering U-Boot, providing
+	  parameters in a bloblist and a devicetree. It allows the various
+	  firmware stages to communicate state and settings to following
+	  stages.
+
+config SPL_PASSAGE_ADD_DTB
+	bool "Add devicetree to the outgoing passage"
+	depends on SPL_PASSAGE_OUT
+	default y if SPL_PASSAGE_OUT && !SPL_PASSAGE_IN
+	help
+	  Add the devicetree into the bloblist in SPL (it is assumed to not
+	  already be there) so that the next phase (U-Boot) can find it.
+
+	  This option should be enabled in the phase that sets up the passage.
+
 source "common/spl/Kconfig"
 
 config IMAGE_SIGN_INFO
diff --git a/common/spl/spl.c b/common/spl/spl.c
index d54356b6a28..be770d0226c 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -56,6 +56,11 @@ binman_sym_declare(ulong, spl, image_pos);
 binman_sym_declare(ulong, spl, size);
 #endif
 
+#if CONFIG_IS_ENABLED(PASSAGE_ADD_DTB)
+binman_sym_declare(ulong, u_boot_dtb, image_pos);
+binman_sym_declare(ulong, u_boot_dtb, size);
+#endif
+
 /* Define board data structure */
 static struct bd_info bdata __attribute__ ((section(".data")));
 
@@ -406,7 +411,8 @@ static int setup_spl_handoff(void)
 {
 	struct spl_handoff *ho;
 
-	ho = bloblist_ensure(BLOBLISTT_U_BOOT_SPL_HANDOFF, sizeof(struct spl_handoff));
+	ho = bloblist_ensure(BLOBLISTT_U_BOOT_SPL_HANDOFF,
+			     sizeof(struct spl_handoff));
 	if (!ho)
 		return -ENOENT;
 
@@ -423,7 +429,8 @@ static int write_spl_handoff(void)
 	struct spl_handoff *ho;
 	int ret;
 
-	ho = bloblist_find(BLOBLISTT_U_BOOT_SPL_HANDOFF, sizeof(struct spl_handoff));
+	ho = bloblist_find(BLOBLISTT_U_BOOT_SPL_HANDOFF,
+			   sizeof(struct spl_handoff));
 	if (!ho)
 		return -ENOENT;
 	handoff_save_dram(ho);
@@ -440,6 +447,33 @@ static inline int write_spl_handoff(void) { return 0; }
 
 #endif /* HANDOFF */
 
+/**
+ * Write the devicetree for the next phase into the passage
+ *
+ * For now we assume the next phase is U-Boot proper
+ *
+ * @return 0 on success,  -ENOSPC if it is missing and could not be added due to
+ *	lack of space, or -ESPIPE it exists but has the wrong size
+ */
+static int passage_write_dtb(void)
+{
+#if CONFIG_IS_ENABLED(PASSAGE_ADD_DTB)
+	ulong start = binman_sym(ulong, u_boot_dtb, image_pos);
+	ulong size = binman_sym(ulong, u_boot_dtb, size);
+	void *dtb;
+	int ret;
+
+	log_debug("passage: Adding control dtb size %lx\n", size);
+	ret = bloblist_ensure_size(BLOBLISTT_CONTROL_DTB, size, 0,
+				   (void **)&dtb);
+	if (ret)
+		return ret;
+	memcpy(dtb, map_sysmem(start, size), size);
+#endif
+
+	return 0;
+}
+
 /**
  * get_bootstage_id() - Get the bootstage ID to emit
  *
@@ -761,6 +795,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 			printf(SPL_TPL_PROMPT
 			       "SPL hand-off write failed (err=%d)\n", ret);
 	}
+	if (CONFIG_IS_ENABLED(PASSAGE_ADD_DTB)) {
+		ret = passage_write_dtb();
+		if (ret)
+			printf(SPL_TPL_PROMPT
+			       "Write DTB failed (err=%d)\n", ret);
+	}
 	if (CONFIG_IS_ENABLED(BLOBLIST)) {
 		ret = bloblist_finish();
 		if (ret)
diff --git a/include/spl.h b/include/spl.h
index a4d5cedad3a..472b171f5be 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -270,6 +270,8 @@ binman_sym_extern(ulong, u_boot_any, image_pos);
 binman_sym_extern(ulong, u_boot_any, size);
 binman_sym_extern(ulong, spl, image_pos);
 binman_sym_extern(ulong, spl, size);
+binman_sym_extern(ulong, u_boot_dtb, image_pos);
+binman_sym_extern(ulong, u_boot_dtb, size);
 
 /**
  * spl_get_image_pos() - get the image position of the next phase
-- 
2.34.1.703.g22d0c6ccf7-goog