[PATCH v2 00/15] Multiple addition and improvement to ipq8064 gcc

[PATCH v2 00/15] Multiple addition and improvement to ipq8064 gcc

[Ansuel Smith]

This is an attempt in making the ipq8064 SoC actually usable. Currently
many feature are missing for this SoC and devs user off-the-tree patches
to make it work (example patch for missing clock, patch for cpufreq
driver, patch to add missing node in the dts)

I notice there was some work in modernizing the gcc driver for other
qcom target but this wasn't done for ipq806x. This does exactly this, we
drop any parent_names stuff and we switch to the parent_data way. We
also drop the pxo and cxo source clk from gcc driver and we refer to the
dts for it.

This also add all the missing feature for the nss cores and the
cryptoengine in them. It does also introduce the required flags to make
the RPM actually work and NOT reject any command. There was an attempt
in declaring these clock as core clock in the dts but this ends up in no
serial as the kernel makes these clock not accessible. We just want to
make the kernel NOT disable them if unused nothing more.

At the end we update the ipq8064 dtsi to add the pxo and cxo tag and
declare them in gcc and also fix a problem with tsens probe.

v2:
- Fix error from Rob bot.
- Add additional commits to make qcom,gcc.yaml a template
- Squash parent_hws patch with the modernize patch
- Create gcc_pxo instead of using long define.

Ansuel Smith (15):
  dt-bindings: clock: permit additionalProprieties to qcom,gcc
  dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation
  dt-bindings: clock: Document qcom,gcc-ipq8064 binding
  drivers: clk: qcom: gcc-ipq806x: fix wrong naming for
    gcc_pxo_pll8_pll0
  drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data
  drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents
  drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk
  drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores
  drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock
  drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
  dt-bindings: clock: add ipq8064 ce5 clk define
  drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks
  dt-bindings: reset: add ipq8064 ce5 resets
  drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets
  ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064

 .../bindings/clock/qcom,gcc-apq8064.yaml      |  27 +-
 .../bindings/clock/qcom,gcc-ipq8064.yaml      |  70 ++
 .../devicetree/bindings/clock/qcom,gcc.yaml   |  41 +-
 arch/arm/boot/dts/qcom-ipq8064.dtsi           |   8 +-
 drivers/clk/qcom/gcc-ipq806x.c                | 638 +++++++++++++-----
 include/dt-bindings/clock/qcom,gcc-ipq806x.h  |   5 +-
 include/dt-bindings/reset/qcom,gcc-ipq806x.h  |   5 +
 7 files changed, 581 insertions(+), 213 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml

-- 
2.33.1

[PATCH v2 01/15] dt-bindings: clock: permit additionalProprieties to qcom,gcc

[Ansuel Smith]

To permit the use of qcom,gcc as a template for other Documentation, set
additionalProprieties to true.
While at it add the missing syscon for qcom,ipq8064 that is mandatory
for the correct function of the tsens driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/clock/qcom,gcc.yaml   | 41 ++++++++++---------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index f66d703bd913..3fd03687a6f7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -36,24 +36,27 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,gcc-apq8084
-      - qcom,gcc-ipq4019
-      - qcom,gcc-ipq6018
-      - qcom,gcc-ipq8064
-      - qcom,gcc-mdm9607
-      - qcom,gcc-msm8226
-      - qcom,gcc-msm8660
-      - qcom,gcc-msm8916
-      - qcom,gcc-msm8939
-      - qcom,gcc-msm8953
-      - qcom,gcc-msm8960
-      - qcom,gcc-msm8974
-      - qcom,gcc-msm8974pro
-      - qcom,gcc-msm8974pro-ac
-      - qcom,gcc-mdm9615
-      - qcom,gcc-sdm630
-      - qcom,gcc-sdm660
+    oneOf:
+      - enum:
+          - qcom,gcc-apq8084
+          - qcom,gcc-ipq4019
+          - qcom,gcc-ipq6018
+          - qcom,gcc-mdm9607
+          - qcom,gcc-msm8226
+          - qcom,gcc-msm8660
+          - qcom,gcc-msm8916
+          - qcom,gcc-msm8939
+          - qcom,gcc-msm8953
+          - qcom,gcc-msm8960
+          - qcom,gcc-msm8974
+          - qcom,gcc-msm8974pro
+          - qcom,gcc-msm8974pro-ac
+          - qcom,gcc-mdm9615
+          - qcom,gcc-sdm630
+          - qcom,gcc-sdm660
+      - items:
+          - const: qcom,gcc-ipq8064
+          - const: syscon
 
   '#clock-cells':
     const: 1
@@ -78,7 +81,7 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+additionalProperties: true
 
 examples:
   # Example for GCC for MSM8960:
-- 
2.33.1

[PATCH v2 02/15] dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation

[Ansuel Smith]

Simplify qcon,gcc-apq8064 Documentation by using qcom,gcc.yaml as a
template.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../bindings/clock/qcom,gcc-apq8064.yaml      | 27 +++----------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 8e2eac6cbfb9..d65b3fc5bfa1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -6,6 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
 
+allOf:
+  - $ref: qcom,gcc.yaml#
+
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
@@ -19,21 +22,6 @@ description: |
   - dt-bindings/reset/qcom,gcc-msm8960.h
 
 properties:
-  compatible:
-    const: qcom,gcc-apq8064
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
   nvmem-cells:
     minItems: 1
     maxItems: 2
@@ -53,16 +41,7 @@ properties:
   '#thermal-sensor-cells':
     const: 1
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
-  - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
   - nvmem-cells
   - nvmem-cell-names
   - '#thermal-sensor-cells'
-- 
2.33.1

[PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Ansuel Smith]

Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
clocks. The gcc node is also used by the tsens driver, already documented,
to get the calib nvmem cells and the base reg from gcc.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../bindings/clock/qcom,gcc-ipq8064.yaml      | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 000000000000..abc76a46b2ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on IPQ8064.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq806x.h
+  - dt-bindings/reset/qcom,gcc-ipq806x.h
+
+properties:
+  clocks:
+    items:
+      - description: PXO source
+      - description: CXO source
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
-- 
2.33.1

[PATCH v2 04/15] drivers: clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0

[Ansuel Smith]

Parent gcc_pxo_pll8_pll0 had the parent definition and parent map
swapped. Fix this naming error.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index d6b7adb4be38..34cddf461dba 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -291,13 +291,13 @@ static const char * const gcc_pxo_pll3[] = {
 	"pll3",
 };
 
-static const struct parent_map gcc_pxo_pll8_pll0[] = {
+static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
 	{ P_PXO, 0 },
 	{ P_PLL8, 3 },
 	{ P_PLL0, 2 }
 };
 
-static const char * const gcc_pxo_pll8_pll0_map[] = {
+static const char * const gcc_pxo_pll8_pll0[] = {
 	"pxo",
 	"pll8_vote",
 	"pll0_vote",
@@ -1993,7 +1993,7 @@ static struct clk_rcg usb30_master_clk_src = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb30_master,
 	.clkr = {
@@ -2001,7 +2001,7 @@ static struct clk_rcg usb30_master_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_master_ref_src",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2063,7 +2063,7 @@ static struct clk_rcg usb30_utmi_clk = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb30_utmi,
 	.clkr = {
@@ -2071,7 +2071,7 @@ static struct clk_rcg usb30_utmi_clk = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_utmi_clk",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2133,7 +2133,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb,
 	.clkr = {
@@ -2141,7 +2141,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2197,7 +2197,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb,
 	.clkr = {
@@ -2205,7 +2205,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
-- 
2.33.1

[PATCH v2 05/15] drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data

[Ansuel Smith]

Convert parent_names to parent_data to modernize the driver.
Where possible use parent_hws directly.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 286 ++++++++++++++++++++-------------
 1 file changed, 173 insertions(+), 113 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 34cddf461dba..828383c30322 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -25,6 +25,10 @@
 #include "clk-hfpll.h"
 #include "reset.h"
 
+static const struct clk_parent_data gcc_pxo[] = {
+	{ .fw_name = "pxo" },
+};
+
 static struct clk_pll pll0 = {
 	.l_reg = 0x30c4,
 	.m_reg = 0x30c8,
@@ -35,7 +39,7 @@ static struct clk_pll pll0 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll0",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -46,7 +50,9 @@ static struct clk_regmap pll0_vote = {
 	.enable_mask = BIT(0),
 	.hw.init = &(struct clk_init_data){
 		.name = "pll0_vote",
-		.parent_names = (const char *[]){ "pll0" },
+		.parent_hws = (const struct clk_hw*[]){
+			&pll0.clkr.hw,
+		},
 		.num_parents = 1,
 		.ops = &clk_pll_vote_ops,
 	},
@@ -62,7 +68,7 @@ static struct clk_pll pll3 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll3",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -89,7 +95,7 @@ static struct clk_pll pll8 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll8",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -100,7 +106,9 @@ static struct clk_regmap pll8_vote = {
 	.enable_mask = BIT(8),
 	.hw.init = &(struct clk_init_data){
 		.name = "pll8_vote",
-		.parent_names = (const char *[]){ "pll8" },
+		.parent_hws = (const struct clk_hw*[]){
+			&pll8.clkr.hw,
+		},
 		.num_parents = 1,
 		.ops = &clk_pll_vote_ops,
 	},
@@ -123,7 +131,7 @@ static struct hfpll_data hfpll0_data = {
 static struct clk_hfpll hfpll0 = {
 	.d = &hfpll0_data,
 	.clkr.hw.init = &(struct clk_init_data){
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.name = "hfpll0",
 		.ops = &clk_ops_hfpll,
@@ -149,7 +157,7 @@ static struct hfpll_data hfpll1_data = {
 static struct clk_hfpll hfpll1 = {
 	.d = &hfpll1_data,
 	.clkr.hw.init = &(struct clk_init_data){
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.name = "hfpll1",
 		.ops = &clk_ops_hfpll,
@@ -175,7 +183,7 @@ static struct hfpll_data hfpll_l2_data = {
 static struct clk_hfpll hfpll_l2 = {
 	.d = &hfpll_l2_data,
 	.clkr.hw.init = &(struct clk_init_data){
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.name = "hfpll_l2",
 		.ops = &clk_ops_hfpll,
@@ -194,7 +202,7 @@ static struct clk_pll pll14 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll14",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -205,7 +213,9 @@ static struct clk_regmap pll14_vote = {
 	.enable_mask = BIT(14),
 	.hw.init = &(struct clk_init_data){
 		.name = "pll14_vote",
-		.parent_names = (const char *[]){ "pll14" },
+		.parent_hws = (const struct clk_hw*[]){
+			&pll14.clkr.hw,
+		},
 		.num_parents = 1,
 		.ops = &clk_pll_vote_ops,
 	},
@@ -238,7 +248,7 @@ static struct clk_pll pll18 = {
 	.freq_tbl = pll18_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll18",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -259,9 +269,9 @@ static const struct parent_map gcc_pxo_pll8_map[] = {
 	{ P_PLL8, 3 }
 };
 
-static const char * const gcc_pxo_pll8[] = {
-	"pxo",
-	"pll8_vote",
+static const struct clk_parent_data gcc_pxo_pll8[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
 };
 
 static const struct parent_map gcc_pxo_pll8_cxo_map[] = {
@@ -270,10 +280,10 @@ static const struct parent_map gcc_pxo_pll8_cxo_map[] = {
 	{ P_CXO, 5 }
 };
 
-static const char * const gcc_pxo_pll8_cxo[] = {
-	"pxo",
-	"pll8_vote",
-	"cxo",
+static const struct clk_parent_data gcc_pxo_pll8_cxo[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .fw_name = "cxo" },
 };
 
 static const struct parent_map gcc_pxo_pll3_map[] = {
@@ -286,9 +296,9 @@ static const struct parent_map gcc_pxo_pll3_sata_map[] = {
 	{ P_PLL3, 6 }
 };
 
-static const char * const gcc_pxo_pll3[] = {
-	"pxo",
-	"pll3",
+static const struct clk_parent_data gcc_pxo_pll3[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll3.clkr.hw },
 };
 
 static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
@@ -297,10 +307,10 @@ static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
 	{ P_PLL0, 2 }
 };
 
-static const char * const gcc_pxo_pll8_pll0[] = {
-	"pxo",
-	"pll8_vote",
-	"pll0_vote",
+static const struct clk_parent_data gcc_pxo_pll8_pll0[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .hw = &pll0_vote.hw },
 };
 
 static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
@@ -311,12 +321,12 @@ static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
 	{ P_PLL18, 1 }
 };
 
-static const char * const gcc_pxo_pll8_pll14_pll18_pll0[] = {
-	"pxo",
-	"pll8_vote",
-	"pll0_vote",
-	"pll14",
-	"pll18",
+static const struct clk_parent_data gcc_pxo_pll8_pll14_pll18_pll0[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .hw = &pll0_vote.hw },
+	{ .hw = &pll14.clkr.hw },
+	{ .hw = &pll18.clkr.hw },
 };
 
 static struct freq_tbl clk_tbl_gsbi_uart[] = {
@@ -362,7 +372,7 @@ static struct clk_rcg gsbi1_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -378,8 +388,8 @@ static struct clk_branch gsbi1_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi1_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi1_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -413,7 +423,7 @@ static struct clk_rcg gsbi2_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -429,8 +439,8 @@ static struct clk_branch gsbi2_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi2_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi2_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -464,7 +474,7 @@ static struct clk_rcg gsbi4_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -480,8 +490,8 @@ static struct clk_branch gsbi4_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi4_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi4_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -515,7 +525,7 @@ static struct clk_rcg gsbi5_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -531,8 +541,8 @@ static struct clk_branch gsbi5_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi5_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi5_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -566,7 +576,7 @@ static struct clk_rcg gsbi6_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -582,8 +592,8 @@ static struct clk_branch gsbi6_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi6_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi6_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -617,7 +627,7 @@ static struct clk_rcg gsbi7_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -633,8 +643,8 @@ static struct clk_branch gsbi7_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi7_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi7_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -681,7 +691,7 @@ static struct clk_rcg gsbi1_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -697,7 +707,9 @@ static struct clk_branch gsbi1_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_qup_clk",
-			.parent_names = (const char *[]){ "gsbi1_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi1_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -730,7 +742,7 @@ static struct clk_rcg gsbi2_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -746,7 +758,9 @@ static struct clk_branch gsbi2_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_qup_clk",
-			.parent_names = (const char *[]){ "gsbi2_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi2_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -779,7 +793,7 @@ static struct clk_rcg gsbi4_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -795,7 +809,9 @@ static struct clk_branch gsbi4_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_qup_clk",
-			.parent_names = (const char *[]){ "gsbi4_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi4_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -828,7 +844,7 @@ static struct clk_rcg gsbi5_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -844,7 +860,9 @@ static struct clk_branch gsbi5_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_qup_clk",
-			.parent_names = (const char *[]){ "gsbi5_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi5_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -877,7 +895,7 @@ static struct clk_rcg gsbi6_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -893,7 +911,9 @@ static struct clk_branch gsbi6_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_qup_clk",
-			.parent_names = (const char *[]){ "gsbi6_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi6_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -926,7 +946,7 @@ static struct clk_rcg gsbi7_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -942,7 +962,9 @@ static struct clk_branch gsbi7_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_qup_clk",
-			.parent_names = (const char *[]){ "gsbi7_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi7_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1076,7 +1098,7 @@ static struct clk_rcg gp0_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp0_src",
-			.parent_names = gcc_pxo_pll8_cxo,
+			.parent_data = gcc_pxo_pll8_cxo,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -1092,7 +1114,9 @@ static struct clk_branch gp0_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp0_clk",
-			.parent_names = (const char *[]){ "gp0_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gp0_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1125,7 +1149,7 @@ static struct clk_rcg gp1_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp1_src",
-			.parent_names = gcc_pxo_pll8_cxo,
+			.parent_data = gcc_pxo_pll8_cxo,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1141,7 +1165,9 @@ static struct clk_branch gp1_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp1_clk",
-			.parent_names = (const char *[]){ "gp1_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gp1_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1174,7 +1200,7 @@ static struct clk_rcg gp2_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp2_src",
-			.parent_names = gcc_pxo_pll8_cxo,
+			.parent_data = gcc_pxo_pll8_cxo,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1190,7 +1216,9 @@ static struct clk_branch gp2_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp2_clk",
-			.parent_names = (const char *[]){ "gp2_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gp2_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1228,7 +1256,7 @@ static struct clk_rcg prng_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1244,7 +1272,9 @@ static struct clk_branch prng_clk = {
 		.enable_mask = BIT(10),
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_clk",
-			.parent_names = (const char *[]){ "prng_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&prng_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 		},
@@ -1290,7 +1320,7 @@ static struct clk_rcg sdc1_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc1_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1305,7 +1335,9 @@ static struct clk_branch sdc1_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc1_clk",
-			.parent_names = (const char *[]){ "sdc1_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sdc1_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1338,7 +1370,7 @@ static struct clk_rcg sdc3_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc3_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1353,7 +1385,9 @@ static struct clk_branch sdc3_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc3_clk",
-			.parent_names = (const char *[]){ "sdc3_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sdc3_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1421,7 +1455,7 @@ static struct clk_rcg tsif_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "tsif_ref_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1436,7 +1470,9 @@ static struct clk_branch tsif_ref_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "tsif_ref_clk",
-			.parent_names = (const char *[]){ "tsif_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&tsif_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1583,7 +1619,7 @@ static struct clk_rcg pcie_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1599,7 +1635,9 @@ static struct clk_branch pcie_ref_src_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie_ref_src_clk",
-			.parent_names = (const char *[]){ "pcie_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&pcie_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1675,7 +1713,7 @@ static struct clk_rcg pcie1_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie1_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1691,7 +1729,9 @@ static struct clk_branch pcie1_ref_src_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie1_ref_src_clk",
-			.parent_names = (const char *[]){ "pcie1_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&pcie1_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1767,7 +1807,7 @@ static struct clk_rcg pcie2_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie2_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1783,7 +1823,9 @@ static struct clk_branch pcie2_ref_src_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie2_ref_src_clk",
-			.parent_names = (const char *[]){ "pcie2_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&pcie2_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1864,7 +1906,7 @@ static struct clk_rcg sata_ref_src = {
 		.enable_mask = BIT(7),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1880,7 +1922,9 @@ static struct clk_branch sata_rxoob_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_rxoob_clk",
-			.parent_names = (const char *[]){ "sata_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sata_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1896,7 +1940,9 @@ static struct clk_branch sata_pmalive_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_pmalive_clk",
-			.parent_names = (const char *[]){ "sata_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sata_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1912,7 +1958,7 @@ static struct clk_branch sata_phy_ref_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_phy_ref_clk",
-			.parent_names = (const char *[]){ "pxo" },
+			.parent_data = gcc_pxo,
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 		},
@@ -2001,7 +2047,7 @@ static struct clk_rcg usb30_master_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_master_ref_src",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2017,7 +2063,9 @@ static struct clk_branch usb30_0_branch_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_0_branch_clk",
-			.parent_names = (const char *[]){ "usb30_master_ref_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_master_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2033,7 +2081,9 @@ static struct clk_branch usb30_1_branch_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_1_branch_clk",
-			.parent_names = (const char *[]){ "usb30_master_ref_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_master_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2071,7 +2121,7 @@ static struct clk_rcg usb30_utmi_clk = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_utmi_clk",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2087,7 +2137,9 @@ static struct clk_branch usb30_0_utmi_clk_ctl = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_0_utmi_clk_ctl",
-			.parent_names = (const char *[]){ "usb30_utmi_clk", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_utmi_clk.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2103,7 +2155,9 @@ static struct clk_branch usb30_1_utmi_clk_ctl = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_1_utmi_clk_ctl",
-			.parent_names = (const char *[]){ "usb30_utmi_clk", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_utmi_clk.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2141,7 +2195,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2157,7 +2211,9 @@ static struct clk_branch usb_hs1_xcvr_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_clk",
-			.parent_names = (const char *[]){ "usb_hs1_xcvr_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb_hs1_xcvr_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2205,7 +2261,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2221,7 +2277,9 @@ static struct clk_branch usb_fs1_xcvr_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_clk",
-			.parent_names = (const char *[]){ "usb_fs1_xcvr_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb_fs1_xcvr_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2237,7 +2295,9 @@ static struct clk_branch usb_fs1_sys_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_sys_clk",
-			.parent_names = (const char *[]){ "usb_fs1_xcvr_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb_fs1_xcvr_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2337,7 +2397,7 @@ static struct clk_dyn_rcg gmac_core1_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core1_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2354,8 +2414,8 @@ static struct clk_branch gmac_core1_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core1_clk",
-			.parent_names = (const char *[]){
-				"gmac_core1_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core1_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2409,7 +2469,7 @@ static struct clk_dyn_rcg gmac_core2_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core2_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2426,8 +2486,8 @@ static struct clk_branch gmac_core2_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core2_clk",
-			.parent_names = (const char *[]){
-				"gmac_core2_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core2_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2481,7 +2541,7 @@ static struct clk_dyn_rcg gmac_core3_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core3_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2498,8 +2558,8 @@ static struct clk_branch gmac_core3_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core3_clk",
-			.parent_names = (const char *[]){
-				"gmac_core3_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core3_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2553,7 +2613,7 @@ static struct clk_dyn_rcg gmac_core4_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core4_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2570,8 +2630,8 @@ static struct clk_branch gmac_core4_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core4_clk",
-			.parent_names = (const char *[]){
-				"gmac_core4_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core4_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2613,7 +2673,7 @@ static struct clk_dyn_rcg nss_tcm_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "nss_tcm_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2628,8 +2688,8 @@ static struct clk_branch nss_tcm_clk = {
 		.enable_mask = BIT(6) | BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "nss_tcm_clk",
-			.parent_names = (const char *[]){
-				"nss_tcm_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&nss_tcm_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2691,7 +2751,7 @@ static struct clk_dyn_rcg ubi32_core1_src_clk = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core1_src_clk",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
@@ -2744,7 +2804,7 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core2_src_clk",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
-- 
2.33.1

[PATCH v2 06/15] drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents

[Ansuel Smith]

Use ARRAY_SIZE for num_parents instead of hardcoding the value.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 68 +++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 828383c30322..f6db7247835e 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -373,7 +373,7 @@ static struct clk_rcg gsbi1_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -424,7 +424,7 @@ static struct clk_rcg gsbi2_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -475,7 +475,7 @@ static struct clk_rcg gsbi4_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -526,7 +526,7 @@ static struct clk_rcg gsbi5_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -577,7 +577,7 @@ static struct clk_rcg gsbi6_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -628,7 +628,7 @@ static struct clk_rcg gsbi7_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -692,7 +692,7 @@ static struct clk_rcg gsbi1_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -743,7 +743,7 @@ static struct clk_rcg gsbi2_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -794,7 +794,7 @@ static struct clk_rcg gsbi4_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -845,7 +845,7 @@ static struct clk_rcg gsbi5_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -896,7 +896,7 @@ static struct clk_rcg gsbi6_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -947,7 +947,7 @@ static struct clk_rcg gsbi7_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -1099,7 +1099,7 @@ static struct clk_rcg gp0_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gp0_src",
 			.parent_data = gcc_pxo_pll8_cxo,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -1150,7 +1150,7 @@ static struct clk_rcg gp1_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gp1_src",
 			.parent_data = gcc_pxo_pll8_cxo,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1201,7 +1201,7 @@ static struct clk_rcg gp2_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gp2_src",
 			.parent_data = gcc_pxo_pll8_cxo,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1257,7 +1257,7 @@ static struct clk_rcg prng_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	},
@@ -1321,7 +1321,7 @@ static struct clk_rcg sdc1_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc1_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	}
@@ -1371,7 +1371,7 @@ static struct clk_rcg sdc3_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc3_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	}
@@ -1456,7 +1456,7 @@ static struct clk_rcg tsif_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "tsif_ref_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	}
@@ -1620,7 +1620,7 @@ static struct clk_rcg pcie_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1714,7 +1714,7 @@ static struct clk_rcg pcie1_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie1_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1808,7 +1808,7 @@ static struct clk_rcg pcie2_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie2_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1907,7 +1907,7 @@ static struct clk_rcg sata_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2048,7 +2048,7 @@ static struct clk_rcg usb30_master_clk_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_master_ref_src",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2122,7 +2122,7 @@ static struct clk_rcg usb30_utmi_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_utmi_clk",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2196,7 +2196,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_src",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2262,7 +2262,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_src",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2398,7 +2398,7 @@ static struct clk_dyn_rcg gmac_core1_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core1_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2470,7 +2470,7 @@ static struct clk_dyn_rcg gmac_core2_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core2_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2542,7 +2542,7 @@ static struct clk_dyn_rcg gmac_core3_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core3_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2614,7 +2614,7 @@ static struct clk_dyn_rcg gmac_core4_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core4_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2674,7 +2674,7 @@ static struct clk_dyn_rcg nss_tcm_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "nss_tcm_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2752,7 +2752,7 @@ static struct clk_dyn_rcg ubi32_core1_src_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core1_src_clk",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
 		},
@@ -2805,7 +2805,7 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core2_src_clk",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
 		},
-- 
2.33.1

[PATCH v2 07/15] drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk

[Ansuel Smith]

We now define these clk in dts. Drop pxo and cxo hardcoded in the gcc
probe function.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index f6db7247835e..a4bf78fe8678 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -3119,23 +3119,14 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_match_table);
 
 static int gcc_ipq806x_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
 	struct regmap *regmap;
 	int ret;
 
-	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000);
-	if (ret)
-		return ret;
-
-	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000);
-	if (ret)
-		return ret;
-
 	ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
 	if (ret)
 		return ret;
 
-	regmap = dev_get_regmap(dev, NULL);
+	regmap = dev_get_regmap(&pdev->dev, NULL);
 	if (!regmap)
 		return -ENODEV;
 
-- 
2.33.1

[PATCH v2 08/15] drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores

[Ansuel Smith]

Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be
clocked to 800MHz. Add these missing freq to the gcc driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index a4bf78fe8678..53a61860063d 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -232,7 +232,9 @@ static struct clk_regmap pll14_vote = {
 
 static struct pll_freq_tbl pll18_freq_tbl[] = {
 	NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
+	NSS_PLL_RATE(600000000, 48, 0, 1, 0x01495625),
 	NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
+	NSS_PLL_RATE(800000000, 64, 0, 1, 0x01495625),
 };
 
 static struct clk_pll pll18 = {
@@ -2702,7 +2704,9 @@ static const struct freq_tbl clk_tbl_nss[] = {
 	{ 110000000, P_PLL18, 1, 1, 5 },
 	{ 275000000, P_PLL18, 2, 0, 0 },
 	{ 550000000, P_PLL18, 1, 0, 0 },
+	{ 600000000, P_PLL18, 1, 0, 0 },
 	{ 733000000, P_PLL18, 1, 0, 0 },
+	{ 800000000, P_PLL18, 1, 0, 0 },
 	{ }
 };
 
-- 
2.33.1

[PATCH v2 09/15] drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock

[Ansuel Smith]

Some clocks are used by other devices present on the SoC. For example
the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to
reject any regulator change command. These clock should never be
disabled.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 53a61860063d..77bc3d94f580 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -798,7 +798,7 @@ static struct clk_rcg gsbi4_qup_src = {
 			.parent_data = gcc_pxo_pll8,
 			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
-			.flags = CLK_SET_PARENT_GATE,
+			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -816,7 +816,7 @@ static struct clk_branch gsbi4_qup_clk = {
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
-			.flags = CLK_SET_RATE_PARENT,
+			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -900,7 +900,7 @@ static struct clk_rcg gsbi6_qup_src = {
 			.parent_data = gcc_pxo_pll8,
 			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
-			.flags = CLK_SET_PARENT_GATE,
+			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -969,7 +969,7 @@ static struct clk_branch gsbi7_qup_clk = {
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
-			.flags = CLK_SET_RATE_PARENT,
+			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -1015,6 +1015,7 @@ static struct clk_branch gsbi4_h_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_h_clk",
 			.ops = &clk_branch_ops,
+			.flags = CLK_IGNORE_UNUSED,
 		},
 	},
 };
-- 
2.33.1

[PATCH v2 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Ansuel Smith]

Add additional freq supported for the sdc table.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 77bc3d94f580..dbd61e4844b0 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
 	{  20210000, P_PLL8,  1, 1,  19 },
 	{  24000000, P_PLL8,  4, 1,   4 },
 	{  48000000, P_PLL8,  4, 1,   2 },
+	{  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
 	{  64000000, P_PLL8,  3, 1,   2 },
 	{  96000000, P_PLL8,  4, 0,   0 },
 	{ 192000000, P_PLL8,  2, 0,   0 },
-- 
2.33.1

[PATCH v2 11/15] dt-bindings: clock: add ipq8064 ce5 clk define

[Ansuel Smith]

Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
index 7deec14a6dee..02262d2ac899 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -240,7 +240,7 @@
 #define PLL14					232
 #define PLL14_VOTE				233
 #define PLL18					234
-#define CE5_SRC					235
+#define CE5_A_CLK				235
 #define CE5_H_CLK				236
 #define CE5_CORE_CLK				237
 #define CE3_SLEEP_CLK				238
@@ -283,5 +283,8 @@
 #define EBI2_AON_CLK				281
 #define NSSTCM_CLK_SRC				282
 #define NSSTCM_CLK				283
+#define CE5_A_CLK_SRC				285
+#define CE5_H_CLK_SRC				286
+#define CE5_CORE_CLK_SRC			287
 
 #endif
-- 
2.33.1

[PATCH v2 12/15] drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks

[Ansuel Smith]

Add missing CryptoEngine clocks and pll11 required clock.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 244 +++++++++++++++++++++++++++++++++
 1 file changed, 244 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index dbd61e4844b0..a86d1504a149 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -256,6 +256,24 @@ static struct clk_pll pll18 = {
 	},
 };
 
+static struct clk_pll pll11 = {
+	.l_reg = 0x3184,
+	.m_reg = 0x3188,
+	.n_reg = 0x318c,
+	.config_reg = 0x3194,
+	.mode_reg = 0x3180,
+	.status_reg = 0x3198,
+	.status_bit = 16,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "pll11",
+		.parent_data = &(const struct clk_parent_data){
+			.fw_name = "pxo",
+		},
+		.num_parents = 1,
+		.ops = &clk_pll_ops,
+	},
+};
+
 enum {
 	P_PXO,
 	P_PLL8,
@@ -264,6 +282,7 @@ enum {
 	P_CXO,
 	P_PLL14,
 	P_PLL18,
+	P_PLL11,
 };
 
 static const struct parent_map gcc_pxo_pll8_map[] = {
@@ -331,6 +350,44 @@ static const struct clk_parent_data gcc_pxo_pll8_pll14_pll18_pll0[] = {
 	{ .hw = &pll18.clkr.hw },
 };
 
+static const struct parent_map gcc_pxo_pll8_pll0_pll14_pll18_pll11_map[] = {
+	{ P_PXO, 0 },
+	{ P_PLL8, 4 },
+	{ P_PLL0, 2 },
+	{ P_PLL14, 5 },
+	{ P_PLL18, 1 },
+	{ P_PLL11, 3 },
+};
+
+static const struct clk_parent_data gcc_pxo_pll8_pll0_pll14_pll18_pll11[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .hw = &pll0_vote.hw },
+	{ .hw = &pll14.clkr.hw },
+	{ .hw = &pll18.clkr.hw },
+	{ .hw = &pll11.clkr.hw },
+
+};
+
+static const struct parent_map gcc_pxo_pll3_pll0_pll14_pll18_pll11_map[] = {
+	{ P_PXO, 0 },
+	{ P_PLL3, 6 },
+	{ P_PLL0, 2 },
+	{ P_PLL14, 5 },
+	{ P_PLL18, 1 },
+	{ P_PLL11, 3 },
+};
+
+static const struct clk_parent_data gcc_pxo_pll3_pll0_pll14_pll18_pll11[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll3.clkr.hw },
+	{ .hw = &pll0_vote.hw },
+	{ .hw = &pll14.clkr.hw },
+	{ .hw = &pll18.clkr.hw },
+	{ .hw = &pll11.clkr.hw },
+
+};
+
 static struct freq_tbl clk_tbl_gsbi_uart[] = {
 	{  1843200, P_PLL8, 2,  6, 625 },
 	{  3686400, P_PLL8, 2, 12, 625 },
@@ -2818,6 +2875,186 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = {
 	},
 };
 
+static const struct freq_tbl clk_tbl_ce5_core[] = {
+	{ 150000000, P_PLL3, 8, 1, 1 },
+	{ 213200000, P_PLL11, 5, 1, 1 },
+	{ }
+};
+
+static struct clk_dyn_rcg ce5_core_src = {
+	.ns_reg[0] = 0x36C4,
+	.ns_reg[1] = 0x36C8,
+	.bank_reg = 0x36C0,
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_ce5_core,
+	.clkr = {
+		.enable_reg = 0x36C0,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_core_src",
+			.parent_data = gcc_pxo_pll3_pll0_pll14_pll18_pll11,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3_pll0_pll14_pll18_pll11),
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch ce5_core_clk = {
+	.halt_reg = 0x2FDC,
+	.halt_bit = 5,
+	.hwcg_reg = 0x36CC,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x36CC,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_core_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&ce5_core_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_ce5_a_clk[] = {
+	{ 160000000, P_PLL0, 5, 1, 1 },
+	{ 213200000, P_PLL11, 5, 1, 1 },
+	{ }
+};
+
+static struct clk_dyn_rcg ce5_a_clk_src = {
+	.ns_reg[0] = 0x3d84,
+	.ns_reg[1] = 0x3d88,
+	.bank_reg = 0x3d80,
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_ce5_a_clk,
+	.clkr = {
+		.enable_reg = 0x3d80,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_a_clk_src",
+			.parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0_pll14_pll18_pll11),
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch ce5_a_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 12,
+	.hwcg_reg = 0x3d8c,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3d8c,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_a_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&ce5_a_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_ce5_h_clk[] = {
+	{ 160000000, P_PLL0, 5, 1, 1 },
+	{ 213200000, P_PLL11, 5, 1, 1 },
+	{ }
+};
+
+static struct clk_dyn_rcg ce5_h_clk_src = {
+	.ns_reg[0] = 0x3c64,
+	.ns_reg[1] = 0x3c68,
+	.bank_reg = 0x3c60,
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_ce5_h_clk,
+	.clkr = {
+		.enable_reg = 0x3c60,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_h_clk_src",
+			.parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0_pll14_pll18_pll11),
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch ce5_h_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 11,
+	.hwcg_reg = 0x3c6c,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3c6c,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_h_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&ce5_h_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL0] = &pll0.clkr,
 	[PLL0_VOTE] = &pll0_vote,
@@ -2825,6 +3062,7 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL4_VOTE] = &pll4_vote,
 	[PLL8] = &pll8.clkr,
 	[PLL8_VOTE] = &pll8_vote,
+	[PLL11] = &pll11.clkr,
 	[PLL14] = &pll14.clkr,
 	[PLL14_VOTE] = &pll14_vote,
 	[PLL18] = &pll18.clkr,
@@ -2939,6 +3177,12 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL9] = &hfpll0.clkr,
 	[PLL10] = &hfpll1.clkr,
 	[PLL12] = &hfpll_l2.clkr,
+	[CE5_A_CLK_SRC] = &ce5_a_clk_src.clkr,
+	[CE5_A_CLK] = &ce5_a_clk.clkr,
+	[CE5_H_CLK_SRC] = &ce5_h_clk_src.clkr,
+	[CE5_H_CLK] = &ce5_h_clk.clkr,
+	[CE5_CORE_CLK_SRC] = &ce5_core_src.clkr,
+	[CE5_CORE_CLK] = &ce5_core_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-- 
2.33.1

[PATCH v2 13/15] dt-bindings: reset: add ipq8064 ce5 resets

[Ansuel Smith]

Add ipq8064 ce5 resets needed for CryptoEngine gcc driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 include/dt-bindings/reset/qcom,gcc-ipq806x.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/dt-bindings/reset/qcom,gcc-ipq806x.h b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
index 26b6f9200620..020c9cf18751 100644
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -163,5 +163,10 @@
 #define NSS_CAL_PRBS_RST_N_RESET			154
 #define NSS_LCKDT_RST_N_RESET				155
 #define NSS_SRDS_N_RESET				156
+#define CRYPTO_ENG1_RESET				157
+#define CRYPTO_ENG2_RESET				158
+#define CRYPTO_ENG3_RESET				159
+#define CRYPTO_ENG4_RESET				160
+#define CRYPTO_AHB_RESET				161
 
 #endif
-- 
2.33.1

[PATCH v2 14/15] drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets

[Ansuel Smith]

Add missing CryptoEngine resets.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index a86d1504a149..8f025cef2ec3 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -3314,6 +3314,11 @@ static const struct qcom_reset_map gcc_ipq806x_resets[] = {
 	[GMAC_CORE3_RESET] = { 0x3cfc, 0 },
 	[GMAC_CORE4_RESET] = { 0x3d1c, 0 },
 	[GMAC_AHB_RESET] = { 0x3e24, 0 },
+	[CRYPTO_ENG1_RESET] = { 0x3e00, 0},
+	[CRYPTO_ENG2_RESET] = { 0x3e04, 0},
+	[CRYPTO_ENG3_RESET] = { 0x3e08, 0},
+	[CRYPTO_ENG4_RESET] = { 0x3e0c, 0},
+	[CRYPTO_AHB_RESET] = { 0x3e10, 0},
 	[NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
 	[NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
 	[NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
-- 
2.33.1

[PATCH v2 15/15] ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064

[Ansuel Smith]

Add syscon compatible required for tsens driver to correctly probe driver
and access the reg. Also add cxo and pxo tag and declare them as gcc clock
now requires them for the ipq8064 gcc driver that has now been modernized.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 11481313bdb6..5524a68cf3d1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -298,13 +298,13 @@ smem: smem@41000000 {
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
@@ -736,7 +736,9 @@ tsens_calib_backup: calib_backup@410 {
 		};
 
 		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064";
+			compatible = "qcom,gcc-ipq8064", "syscon";
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-- 
2.33.1

Re: [PATCH v2 02/15] dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation

[Rob Herring]

On Fri, 21 Jan 2022 00:20:15 +0100, Ansuel Smith wrote:
> Simplify qcon,gcc-apq8064 Documentation by using qcom,gcc.yaml as a
> template.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  .../bindings/clock/qcom,gcc-apq8064.yaml      | 27 +++----------------
>  1 file changed, 3 insertions(+), 24 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.example.dt.yaml:0:0: /example-0/clock-controller@900000: failed to match any schema with compatible: ['qcom,gcc-apq8064']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1582347

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Rob Herring]

On Fri, 21 Jan 2022 00:20:16 +0100, Ansuel Smith wrote:
> Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
> clocks. The gcc node is also used by the tsens driver, already documented,
> to get the calib nvmem cells and the base reg from gcc.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  .../bindings/clock/qcom,gcc-ipq8064.yaml      | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.example.dt.yaml: clock-controller@900000: compatible: ['qcom,gcc-ipq8064', 'syscon'] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.example.dt.yaml: clock-controller@900000: compatible: Additional items are not allowed ('syscon' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.example.dt.yaml: clock-controller@900000: 'clock-names', 'clocks', 'thermal-sensor' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1582346

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v2 02/15] dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation

[Ansuel Smith]

On Thu, Jan 20, 2022 at 07:37:38PM -0600, Rob Herring wrote:
> On Fri, 21 Jan 2022 00:20:15 +0100, Ansuel Smith wrote:
> > Simplify qcon,gcc-apq8064 Documentation by using qcom,gcc.yaml as a
> > template.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  .../bindings/clock/qcom,gcc-apq8064.yaml      | 27 +++----------------
> >  1 file changed, 3 insertions(+), 24 deletions(-)
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.example.dt.yaml:0:0: /example-0/clock-controller@900000: failed to match any schema with compatible: ['qcom,gcc-apq8064']
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/patch/1582347
> 
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.
> 

Mhh, think these error comes from running the bot with the single change.
Or the bot runs the test with the previous commits merged?

I don't have these errors on my system with make dt_binding_check.

-- 
	Ansuel

Re: [PATCH v2 01/15] dt-bindings: clock: permit additionalProprieties to qcom,gcc

[Rob Herring]

On Fri, Jan 21, 2022 at 12:20:14AM +0100, Ansuel Smith wrote:
> To permit the use of qcom,gcc as a template for other Documentation, set
> additionalProprieties to true.
> While at it add the missing syscon for qcom,ipq8064 that is mandatory
> for the correct function of the tsens driver.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  .../devicetree/bindings/clock/qcom,gcc.yaml   | 41 ++++++++++---------
>  1 file changed, 22 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> index f66d703bd913..3fd03687a6f7 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -36,24 +36,27 @@ description: |
>  
>  properties:
>    compatible:
> -    enum:
> -      - qcom,gcc-apq8084
> -      - qcom,gcc-ipq4019
> -      - qcom,gcc-ipq6018
> -      - qcom,gcc-ipq8064
> -      - qcom,gcc-mdm9607
> -      - qcom,gcc-msm8226
> -      - qcom,gcc-msm8660
> -      - qcom,gcc-msm8916
> -      - qcom,gcc-msm8939
> -      - qcom,gcc-msm8953
> -      - qcom,gcc-msm8960
> -      - qcom,gcc-msm8974
> -      - qcom,gcc-msm8974pro
> -      - qcom,gcc-msm8974pro-ac
> -      - qcom,gcc-mdm9615
> -      - qcom,gcc-sdm630
> -      - qcom,gcc-sdm660
> +    oneOf:
> +      - enum:
> +          - qcom,gcc-apq8084
> +          - qcom,gcc-ipq4019
> +          - qcom,gcc-ipq6018
> +          - qcom,gcc-mdm9607
> +          - qcom,gcc-msm8226
> +          - qcom,gcc-msm8660
> +          - qcom,gcc-msm8916
> +          - qcom,gcc-msm8939
> +          - qcom,gcc-msm8953
> +          - qcom,gcc-msm8960
> +          - qcom,gcc-msm8974
> +          - qcom,gcc-msm8974pro
> +          - qcom,gcc-msm8974pro-ac
> +          - qcom,gcc-mdm9615
> +          - qcom,gcc-sdm630
> +          - qcom,gcc-sdm660
> +      - items:
> +          - const: qcom,gcc-ipq8064
> +          - const: syscon
>  
>    '#clock-cells':
>      const: 1
> @@ -78,7 +81,7 @@ required:
>    - '#reset-cells'
>    - '#power-domain-cells'
>  
> -additionalProperties: false
> +additionalProperties: true

This doesn't work. You just allowed any other property to be allowed for 
all these devices. If you need something shared, you have to create a 
common base schema that's referenced by other schemas. Minimally, those 
would look like this:

$ref: /to/base/schema.yaml
unevaluatedProperties: false
properties:
  compatible:
    ...

Rob

Re: [PATCH v2 02/15] dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation

[Rob Herring]

On Fri, Jan 21, 2022 at 02:41:59AM +0100, Ansuel Smith wrote:
> On Thu, Jan 20, 2022 at 07:37:38PM -0600, Rob Herring wrote:
> > On Fri, 21 Jan 2022 00:20:15 +0100, Ansuel Smith wrote:
> > > Simplify qcon,gcc-apq8064 Documentation by using qcom,gcc.yaml as a
> > > template.
> > > 
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > ---
> > >  .../bindings/clock/qcom,gcc-apq8064.yaml      | 27 +++----------------
> > >  1 file changed, 3 insertions(+), 24 deletions(-)
> > > 
> > 
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > 
> > yamllint warnings/errors:
> > 
> > dtschema/dtc warnings/errors:
> > Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.example.dt.yaml:0:0: /example-0/clock-controller@900000: failed to match any schema with compatible: ['qcom,gcc-apq8064']
> > 
> > doc reference errors (make refcheckdocs):
> > 
> > See https://patchwork.ozlabs.org/patch/1582347
> > 
> > This check can fail if there are any dependencies. The base for a patch
> > series is generally the most recent rc1.
> > 
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> > 
> > pip3 install dtschema --upgrade
> > 
> > Please check and re-submit.
> > 
> 
> Mhh, think these error comes from running the bot with the single change.
> Or the bot runs the test with the previous commits merged?

It should apply the whole series one by one. However, if patch 1 didn't 
apply it will still try the rest. It's only smart enough to apply to the 
last rc1. Given it's the merge window, I suspect you have dependency in the 
next rc1.

Rob

Re: [PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Rob Herring]

On Fri, Jan 21, 2022 at 12:20:16AM +0100, Ansuel Smith wrote:
> Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
> clocks. The gcc node is also used by the tsens driver, already documented,
> to get the calib nvmem cells and the base reg from gcc.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  .../bindings/clock/qcom,gcc-ipq8064.yaml      | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> new file mode 100644
> index 000000000000..abc76a46b2ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
> +
> +allOf:
> +  - $ref: qcom,gcc.yaml#
> +
> +maintainers:
> +  - Ansuel Smith <ansuelsmth@gmail.com>
> +
> +description: |
> +  Qualcomm global clock control module which supports the clocks, resets and
> +  power domains on IPQ8064.
> +
> +  See also:
> +  - dt-bindings/clock/qcom,gcc-ipq806x.h
> +  - dt-bindings/reset/qcom,gcc-ipq806x.h
> +
> +properties:

This schema will never be applied because there is not a compatible 
property to use for matching. The base/common schema is the one that 
shouldn't have a compatible and then the specific schemas like this 
one do.

> +  clocks:
> +    items:
> +      - description: PXO source
> +      - description: CXO source
> +
> +  clock-names:
> +    items:
> +      - const: pxo
> +      - const: cxo
> +
> +  thermal-sensor:
> +    type: object
> +
> +    allOf:
> +      - $ref: /schemas/thermal/qcom-tsens.yaml#
> +
> +required:
> +  - clocks
> +  - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    gcc: clock-controller@900000 {
> +      compatible = "qcom,gcc-ipq8064", "syscon";
> +      reg = <0x00900000 0x4000>;
> +      clocks = <&pxo_board>, <&cxo_board>;
> +      clock-names = "pxo", "cxo";
> +      #clock-cells = <1>;
> +      #reset-cells = <1>;
> +      #power-domain-cells = <1>;
> +
> +      tsens: thermal-sensor {
> +        compatible = "qcom,ipq8064-tsens";
> +
> +        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
> +        nvmem-cell-names = "calib", "calib_backup";
> +        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "uplow";
> +
> +        #qcom,sensors = <11>;
> +        #thermal-sensor-cells = <1>;
> +      };
> +    };
> -- 
> 2.33.1
> 
> 

Re: [PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Ansuel Smith]

On Thu, Jan 20, 2022 at 08:04:03PM -0600, Rob Herring wrote:
> On Fri, Jan 21, 2022 at 12:20:16AM +0100, Ansuel Smith wrote:
> > Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
> > clocks. The gcc node is also used by the tsens driver, already documented,
> > to get the calib nvmem cells and the base reg from gcc.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  .../bindings/clock/qcom,gcc-ipq8064.yaml      | 70 +++++++++++++++++++
> >  1 file changed, 70 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > new file mode 100644
> > index 000000000000..abc76a46b2ca
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > @@ -0,0 +1,70 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
> > +
> > +allOf:
> > +  - $ref: qcom,gcc.yaml#
> > +
> > +maintainers:
> > +  - Ansuel Smith <ansuelsmth@gmail.com>
> > +
> > +description: |
> > +  Qualcomm global clock control module which supports the clocks, resets and
> > +  power domains on IPQ8064.
> > +
> > +  See also:
> > +  - dt-bindings/clock/qcom,gcc-ipq806x.h
> > +  - dt-bindings/reset/qcom,gcc-ipq806x.h
> > +
> > +properties:
> 
> This schema will never be applied because there is not a compatible 
> property to use for matching. The base/common schema is the one that 
> shouldn't have a compatible and then the specific schemas like this 
> one do.
>

Just to make things clear. To fix things up, what changes should I do?
- I should remove the compatible from the base schema qcom,gcc.yaml
- Add the compatible to this schema
- Create another schema that includes all the others compatible?

Can I instead:
- Create a qcom,gcc-common.yaml schema
- Modify the qcom,gcc.yaml schema to ref the common one and drop the
  other binding.
- Fix this schema with the missing compatible?

Tell me how I should proceed since it looks to me that all the
Documentation for the gcc driver looks a bit mess and full of
duplicated stuff.

> > +  clocks:
> > +    items:
> > +      - description: PXO source
> > +      - description: CXO source
> > +
> > +  clock-names:
> > +    items:
> > +      - const: pxo
> > +      - const: cxo
> > +
> > +  thermal-sensor:
> > +    type: object
> > +
> > +    allOf:
> > +      - $ref: /schemas/thermal/qcom-tsens.yaml#
> > +
> > +required:
> > +  - clocks
> > +  - clock-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    gcc: clock-controller@900000 {
> > +      compatible = "qcom,gcc-ipq8064", "syscon";
> > +      reg = <0x00900000 0x4000>;
> > +      clocks = <&pxo_board>, <&cxo_board>;
> > +      clock-names = "pxo", "cxo";
> > +      #clock-cells = <1>;
> > +      #reset-cells = <1>;
> > +      #power-domain-cells = <1>;
> > +
> > +      tsens: thermal-sensor {
> > +        compatible = "qcom,ipq8064-tsens";
> > +
> > +        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
> > +        nvmem-cell-names = "calib", "calib_backup";
> > +        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-names = "uplow";
> > +
> > +        #qcom,sensors = <11>;
> > +        #thermal-sensor-cells = <1>;
> > +      };
> > +    };
> > -- 
> > 2.33.1
> > 
> > 

-- 
	Ansuel

Re: [PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Rob Herring]

On Fri, Jan 21, 2022 at 1:07 PM Ansuel Smith <ansuelsmth@gmail.com> wrote:
>
> On Thu, Jan 20, 2022 at 08:04:03PM -0600, Rob Herring wrote:
> > On Fri, Jan 21, 2022 at 12:20:16AM +0100, Ansuel Smith wrote:
> > > Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
> > > clocks. The gcc node is also used by the tsens driver, already documented,
> > > to get the calib nvmem cells and the base reg from gcc.
> > >
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > ---
> > >  .../bindings/clock/qcom,gcc-ipq8064.yaml      | 70 +++++++++++++++++++
> > >  1 file changed, 70 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > > new file mode 100644
> > > index 000000000000..abc76a46b2ca
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> > > @@ -0,0 +1,70 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
> > > +
> > > +allOf:
> > > +  - $ref: qcom,gcc.yaml#
> > > +
> > > +maintainers:
> > > +  - Ansuel Smith <ansuelsmth@gmail.com>
> > > +
> > > +description: |
> > > +  Qualcomm global clock control module which supports the clocks, resets and
> > > +  power domains on IPQ8064.
> > > +
> > > +  See also:
> > > +  - dt-bindings/clock/qcom,gcc-ipq806x.h
> > > +  - dt-bindings/reset/qcom,gcc-ipq806x.h
> > > +
> > > +properties:
> >
> > This schema will never be applied because there is not a compatible
> > property to use for matching. The base/common schema is the one that
> > shouldn't have a compatible and then the specific schemas like this
> > one do.
> >
>
> Just to make things clear. To fix things up, what changes should I do?
> - I should remove the compatible from the base schema qcom,gcc.yaml
> - Add the compatible to this schema
> - Create another schema that includes all the others compatible?

Yes.

>
> Can I instead:
> - Create a qcom,gcc-common.yaml schema
> - Modify the qcom,gcc.yaml schema to ref the common one and drop the
>   other binding.
> - Fix this schema with the missing compatible?

That's fine. That's just a difference in filenames, right?

> Tell me how I should proceed since it looks to me that all the
> Documentation for the gcc driver looks a bit mess and full of
> duplicated stuff.

I think it was originally one document, but had too many if/then
schemas. Or maybe that was another QCom schema. There's no hard rule
on whether to split or not. It's a judgment call.

Rob