[PATCH 0/6] can: peak_usb: add ethtool interface to flashed value

[PATCH 0/6] can: peak_usb: add ethtool interface to flashed value

[Stephane Grosjean]

This series of patches offers the user the possibility to access in
read/write mode a flashed numerical value for each channel of a PEAK-System
USB - CAN/CANFD interface, through the eeprom access ethtool interface.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>

Stephane Grosjean (6):
  can: peak_usb: rename a callback to a more explicit name
  can: peak_usb: add callback to read user value of CANFD devices
  can: peak_usb: correction of a wrong field name
  can: peak_usb: allow flashing of user defined value
  can: peak_usb: replace unregister_netdev() with unregister_candev()
  can: peak_usb: add ethtool interface to user defined flashed device
    number

 drivers/net/can/usb/peak_usb/pcan_usb.c      | 35 ++++++++-
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 75 +++++++++++++++++++-
 drivers/net/can/usb/peak_usb/pcan_usb_core.h |  9 ++-
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c   | 51 +++++++++++++
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c  | 26 +++++--
 drivers/net/can/usb/peak_usb/pcan_usb_pro.h  |  3 +-
 6 files changed, 187 insertions(+), 12 deletions(-)

-- 
2.25.1

[PATCH 1/6] can: peak_usb: rename a callback to a more explicit name

[Stephane Grosjean]

The so-called "device id" is in fact a value defined by the user.
Therefore, in order not to confuse it with the device id used by the USB,
the functions for reading this user-defined value are renamed.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
---
 drivers/net/can/usb/peak_usb/pcan_usb.c      | 6 +++---
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 4 ++--
 drivers/net/can/usb/peak_usb/pcan_usb_core.h | 2 +-
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c  | 6 +++---
 4 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index 17dc178f555b..954abf43d552 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -381,9 +381,9 @@ static int pcan_usb_get_serial(struct peak_usb_device *dev, u32 *serial_number)
 }
 
 /*
- * read device id from device
+ * read user device id from device
  */
-static int pcan_usb_get_device_id(struct peak_usb_device *dev, u32 *device_id)
+static int pcan_usb_get_user_devid(struct peak_usb_device *dev, u32 *device_id)
 {
 	u8 args[PCAN_USB_CMD_ARGS_LEN];
 	int err;
@@ -1015,7 +1015,7 @@ const struct peak_usb_adapter pcan_usb = {
 	.dev_init = pcan_usb_init,
 	.dev_set_bus = pcan_usb_write_mode,
 	.dev_set_bittiming = pcan_usb_set_bittiming,
-	.dev_get_device_id = pcan_usb_get_device_id,
+	.dev_get_user_devid = pcan_usb_get_user_devid,
 	.dev_decode_buf = pcan_usb_decode_buf,
 	.dev_encode_msg = pcan_usb_encode_msg,
 	.dev_start = pcan_usb_start,
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index b850ff8fe4bd..871a01e158bc 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -881,8 +881,8 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 	}
 
 	/* get device number early */
-	if (dev->adapter->dev_get_device_id)
-		dev->adapter->dev_get_device_id(dev, &dev->device_number);
+	if (dev->adapter->dev_get_user_devid)
+		dev->adapter->dev_get_user_devid(dev, &dev->device_number);
 
 	netdev_info(netdev, "attached to %s channel %u (device %u)\n",
 			peak_usb_adapter->name, ctrl_idx, dev->device_number);
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.h b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
index f60af573a2e0..52bea954f2a7 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.h
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
@@ -60,7 +60,7 @@ struct peak_usb_adapter {
 	int (*dev_set_data_bittiming)(struct peak_usb_device *dev,
 				      struct can_bittiming *bt);
 	int (*dev_set_bus)(struct peak_usb_device *dev, u8 onoff);
-	int (*dev_get_device_id)(struct peak_usb_device *dev, u32 *device_id);
+	int (*dev_get_user_devid)(struct peak_usb_device *dev, u32 *device_id);
 	int (*dev_decode_buf)(struct peak_usb_device *dev, struct urb *urb);
 	int (*dev_encode_msg)(struct peak_usb_device *dev, struct sk_buff *skb,
 					u8 *obuf, size_t *size);
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index ebe087f258e3..4a62cf34acb0 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -419,8 +419,8 @@ static int pcan_usb_pro_set_led(struct peak_usb_device *dev, u8 mode,
 	return pcan_usb_pro_send_cmd(dev, &um);
 }
 
-static int pcan_usb_pro_get_device_id(struct peak_usb_device *dev,
-				      u32 *device_id)
+static int pcan_usb_pro_get_user_devid(struct peak_usb_device *dev,
+				       u32 *device_id)
 {
 	struct pcan_usb_pro_devid *pdn;
 	struct pcan_usb_pro_msg um;
@@ -1075,7 +1075,7 @@ const struct peak_usb_adapter pcan_usb_pro = {
 	.dev_free = pcan_usb_pro_free,
 	.dev_set_bus = pcan_usb_pro_set_bus,
 	.dev_set_bittiming = pcan_usb_pro_set_bittiming,
-	.dev_get_device_id = pcan_usb_pro_get_device_id,
+	.dev_get_user_devid = pcan_usb_pro_get_user_devid,
 	.dev_decode_buf = pcan_usb_pro_decode_buf,
 	.dev_encode_msg = pcan_usb_pro_encode_msg,
 	.dev_start = pcan_usb_pro_start,
-- 
2.25.1

[PATCH 2/6] can: peak_usb: add callback to read user value of CANFD devices

[Stephane Grosjean]

This patch adds the specific function that allows to read a user defined
value from the non volatile memory of the USB CANFD interfaces of
PEAK-System.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
---
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 65487ec33566..ab1a8b797ece 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -420,6 +420,24 @@ static int pcan_usb_fd_set_bittiming_fast(struct peak_usb_device *dev,
 	return pcan_usb_fd_send_cmd(dev, ++cmd);
 }
 
+/* read user device id from device */
+static int pcan_usb_fd_get_user_devid(struct peak_usb_device *dev,
+				      u32 *device_id)
+{
+	struct pcan_usb_fd_device *pdev =
+		container_of(dev, struct pcan_usb_fd_device, dev);
+	struct pcan_ufd_fw_info *fw_info = &pdev->usb_if->fw_info;
+	int err;
+
+	err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO,
+				    PCAN_USBPRO_INFO_FW,
+				    fw_info, sizeof(*fw_info));
+	if (!err)
+		*device_id = le32_to_cpu(fw_info->dev_id[dev->ctrl_idx]);
+
+	return err;
+}
+
 /* handle restart but in asynchronously way
  * (uses PCAN-USB Pro code to complete asynchronous request)
  */
@@ -1099,6 +1117,7 @@ const struct peak_usb_adapter pcan_usb_fd = {
 	.dev_set_bus = pcan_usb_fd_set_bus,
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
+	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
@@ -1173,6 +1192,7 @@ const struct peak_usb_adapter pcan_usb_chip = {
 	.dev_set_bus = pcan_usb_fd_set_bus,
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
+	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
@@ -1247,6 +1267,7 @@ const struct peak_usb_adapter pcan_usb_pro_fd = {
 	.dev_set_bus = pcan_usb_fd_set_bus,
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
+	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
@@ -1321,6 +1342,7 @@ const struct peak_usb_adapter pcan_usb_x6 = {
 	.dev_set_bus = pcan_usb_fd_set_bus,
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
+	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
-- 
2.25.1

[PATCH 3/6] can: peak_usb: correction of a wrong field name

[Stephane Grosjean]

This field read from the PCAN-USB Pro device's flash memory contains a
user value rather than a serial number.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
---
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +-
 drivers/net/can/usb/peak_usb/pcan_usb_pro.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index 4a62cf34acb0..6c1f7f8c8f45 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -439,7 +439,7 @@ static int pcan_usb_pro_get_user_devid(struct peak_usb_device *dev,
 		return err;
 
 	pdn = (struct pcan_usb_pro_devid *)pc;
-	*device_id = le32_to_cpu(pdn->serial_num);
+	*device_id = le32_to_cpu(pdn->dev_num);
 
 	return err;
 }
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
index 5d4cf14eb9d9..a34e0fc021c9 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
@@ -112,7 +112,7 @@ struct __packed pcan_usb_pro_devid {
 	u8 data_type;
 	u8 channel;
 	__le16 dummy;
-	__le32 serial_num;
+	__le32 dev_num;
 };
 
 #define PCAN_USBPRO_LED_DEVICE		0x00
-- 
2.25.1

[PATCH 4/6] can: peak_usb: allow flashing of user defined value

[Stephane Grosjean]

This series of patches adds a callback that allows the user to flash a
self-defined value to all USB - CAN/CANFD interfaces of PEAK-System managed
by this driver, namely:
- PCAN-USB
- PCAN-USB FD
- PCAN-USB Pro FD
- PCAN-USB X6
- PCAN-Chip USB
- PCAN-USB Pro

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
---
 drivers/net/can/usb/peak_usb/pcan_usb.c      | 20 +++++++++++++++
 drivers/net/can/usb/peak_usb/pcan_usb_core.h |  1 +
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c   | 26 ++++++++++++++++++++
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c  | 15 +++++++++++
 drivers/net/can/usb/peak_usb/pcan_usb_pro.h  |  1 +
 5 files changed, 63 insertions(+)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index 954abf43d552..b29daaab2e6e 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -398,6 +398,25 @@ static int pcan_usb_get_user_devid(struct peak_usb_device *dev, u32 *device_id)
 	return err;
 }
 
+/* set a new user device id in the flash memory of the device */
+static int pcan_usb_set_user_devid(struct peak_usb_device *dev, u32 devid)
+{
+	u8 args[PCAN_USB_CMD_ARGS_LEN];
+
+	/* this kind of device supports 8-bit values only */
+	if (devid > 255)
+		return -EINVAL;
+
+	/* during the flash process the device disconnects during ~1.25 s.:
+	 * prohibit access when interface is UP
+	 */
+	if (dev->netdev->flags & IFF_UP)
+		return -EBUSY;
+
+	args[0] = (u8)devid;
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_DEVID, PCAN_USB_SET, args);
+}
+
 /*
  * update current time ref with received timestamp
  */
@@ -1016,6 +1035,7 @@ const struct peak_usb_adapter pcan_usb = {
 	.dev_set_bus = pcan_usb_write_mode,
 	.dev_set_bittiming = pcan_usb_set_bittiming,
 	.dev_get_user_devid = pcan_usb_get_user_devid,
+	.dev_set_user_devid = pcan_usb_set_user_devid,
 	.dev_decode_buf = pcan_usb_decode_buf,
 	.dev_encode_msg = pcan_usb_encode_msg,
 	.dev_start = pcan_usb_start,
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.h b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
index 52bea954f2a7..7fdc779986f0 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.h
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
@@ -61,6 +61,7 @@ struct peak_usb_adapter {
 				      struct can_bittiming *bt);
 	int (*dev_set_bus)(struct peak_usb_device *dev, u8 onoff);
 	int (*dev_get_user_devid)(struct peak_usb_device *dev, u32 *device_id);
+	int (*dev_set_user_devid)(struct peak_usb_device *dev, u32 device_id);
 	int (*dev_decode_buf)(struct peak_usb_device *dev, struct urb *urb);
 	int (*dev_encode_msg)(struct peak_usb_device *dev, struct sk_buff *skb,
 					u8 *obuf, size_t *size);
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index ab1a8b797ece..7440d5b145b5 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -136,6 +136,15 @@ struct __packed pcan_ufd_ovr_msg {
 	u8	unused[3];
 };
 
+#define PCAN_UFD_CMD_DEVID_SET		0x81
+
+struct __packed pcan_ufd_device_id {
+	__le16	opcode_channel;
+
+	u16	unused;
+	__le32	device_id;
+};
+
 static inline int pufd_omsg_get_channel(struct pcan_ufd_ovr_msg *om)
 {
 	return om->channel & 0xf;
@@ -438,6 +447,19 @@ static int pcan_usb_fd_get_user_devid(struct peak_usb_device *dev,
 	return err;
 }
 
+/* set a new user device id in the flash memory of the device */
+static int pcan_usb_fd_set_user_devid(struct peak_usb_device *dev, u32 devid)
+{
+	struct pcan_ufd_device_id *cmd = pcan_usb_fd_cmd_buffer(dev);
+
+	cmd->opcode_channel = pucan_cmd_opcode_channel(dev->ctrl_idx,
+						       PCAN_UFD_CMD_DEVID_SET);
+	cmd->device_id = cpu_to_le32(devid);
+
+	/* send the command */
+	return pcan_usb_fd_send_cmd(dev, ++cmd);
+}
+
 /* handle restart but in asynchronously way
  * (uses PCAN-USB Pro code to complete asynchronous request)
  */
@@ -1118,6 +1140,7 @@ const struct peak_usb_adapter pcan_usb_fd = {
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
 	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
+	.dev_set_user_devid = pcan_usb_fd_set_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
@@ -1193,6 +1216,7 @@ const struct peak_usb_adapter pcan_usb_chip = {
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
 	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
+	.dev_set_user_devid = pcan_usb_fd_set_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
@@ -1268,6 +1292,7 @@ const struct peak_usb_adapter pcan_usb_pro_fd = {
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
 	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
+	.dev_set_user_devid = pcan_usb_fd_set_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
@@ -1343,6 +1368,7 @@ const struct peak_usb_adapter pcan_usb_x6 = {
 	.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
 	.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
 	.dev_get_user_devid = pcan_usb_fd_get_user_devid,
+	.dev_set_user_devid = pcan_usb_fd_set_user_devid,
 	.dev_decode_buf = pcan_usb_fd_decode_buf,
 	.dev_start = pcan_usb_fd_start,
 	.dev_stop = pcan_usb_fd_stop,
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index 6c1f7f8c8f45..e98b08746e04 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -76,6 +76,7 @@ static u16 pcan_usb_pro_sizeof_rec[256] = {
 	[PCAN_USBPRO_SETFILTR] = sizeof(struct pcan_usb_pro_filter),
 	[PCAN_USBPRO_SETTS] = sizeof(struct pcan_usb_pro_setts),
 	[PCAN_USBPRO_GETDEVID] = sizeof(struct pcan_usb_pro_devid),
+	[PCAN_USBPRO_SETDEVID] = sizeof(struct pcan_usb_pro_devid),
 	[PCAN_USBPRO_SETLED] = sizeof(struct pcan_usb_pro_setled),
 	[PCAN_USBPRO_RXMSG8] = sizeof(struct pcan_usb_pro_rxmsg),
 	[PCAN_USBPRO_RXMSG4] = sizeof(struct pcan_usb_pro_rxmsg) - 4,
@@ -149,6 +150,7 @@ static int pcan_msg_add_rec(struct pcan_usb_pro_msg *pm, int id, ...)
 
 	case PCAN_USBPRO_SETBTR:
 	case PCAN_USBPRO_GETDEVID:
+	case PCAN_USBPRO_SETDEVID:
 		*pc++ = va_arg(ap, int);
 		pc += 2;
 		*(__le32 *)pc = cpu_to_le32(va_arg(ap, u32));
@@ -444,6 +446,18 @@ static int pcan_usb_pro_get_user_devid(struct peak_usb_device *dev,
 	return err;
 }
 
+static int pcan_usb_pro_set_user_devid(struct peak_usb_device *dev,
+				       u32 device_id)
+{
+	struct pcan_usb_pro_msg um;
+
+	pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
+	pcan_msg_add_rec(&um, PCAN_USBPRO_SETDEVID, dev->ctrl_idx,
+			 device_id);
+
+	return pcan_usb_pro_send_cmd(dev, &um);
+}
+
 static int pcan_usb_pro_set_bittiming(struct peak_usb_device *dev,
 				      struct can_bittiming *bt)
 {
@@ -1076,6 +1090,7 @@ const struct peak_usb_adapter pcan_usb_pro = {
 	.dev_set_bus = pcan_usb_pro_set_bus,
 	.dev_set_bittiming = pcan_usb_pro_set_bittiming,
 	.dev_get_user_devid = pcan_usb_pro_get_user_devid,
+	.dev_set_user_devid = pcan_usb_pro_set_user_devid,
 	.dev_decode_buf = pcan_usb_pro_decode_buf,
 	.dev_encode_msg = pcan_usb_pro_encode_msg,
 	.dev_start = pcan_usb_pro_start,
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
index a34e0fc021c9..28e740af905d 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
@@ -62,6 +62,7 @@ struct __packed pcan_usb_pro_fwinfo {
 #define PCAN_USBPRO_SETBTR	0x02
 #define PCAN_USBPRO_SETBUSACT	0x04
 #define PCAN_USBPRO_SETSILENT	0x05
+#define PCAN_USBPRO_SETDEVID	0x06
 #define PCAN_USBPRO_SETFILTR	0x0a
 #define PCAN_USBPRO_SETTS	0x10
 #define PCAN_USBPRO_GETDEVID	0x12
-- 
2.25.1

[PATCH 5/6] can: peak_usb: replace unregister_netdev() with unregister_candev()

[Stephane Grosjean]

This patch changes call to unregister_netdev() with unregister_candev().

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
---
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index 871a01e158bc..aa8bcdcfa2fb 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -923,7 +923,7 @@ static void peak_usb_disconnect(struct usb_interface *intf)
 		dev->state &= ~PCAN_USB_STATE_CONNECTED;
 		strlcpy(name, netdev->name, IFNAMSIZ);
 
-		unregister_netdev(netdev);
+		unregister_candev(netdev);
 
 		kfree(dev->cmd_buf);
 		dev->next_siblings = NULL;
-- 
2.25.1

[PATCH 6/6] can: peak_usb: add ethtool interface to user defined flashed device number

[Stephane Grosjean]

This patch introduces 3 new functions implementing support for eeprom
access of USB - CAN network interfaces managed by the driver, through the
ethtool interface. All of them (except the PCAN-USB interface) interpret
the 4 data bytes as a 32-bit value to be read/write in the non-volatile
memory of the device. The PCAN-USB only manages a single byte value.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
---
 drivers/net/can/usb/peak_usb/pcan_usb.c      |  9 +++
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 69 ++++++++++++++++++++
 drivers/net/can/usb/peak_usb/pcan_usb_core.h |  6 ++
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c   |  3 +
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c  |  3 +
 5 files changed, 90 insertions(+)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index b29daaab2e6e..60c9329701a5 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -981,8 +981,17 @@ static int pcan_usb_set_phys_id(struct net_device *netdev,
 	return err;
 }
 
+/* This device only handles 8-bit user device id. */
+static int pcan_usb_get_eeprom_len(struct net_device *netdev)
+{
+	return sizeof(u8);
+}
+
 static const struct ethtool_ops pcan_usb_ethtool_ops = {
 	.set_phys_id = pcan_usb_set_phys_id,
+	.get_eeprom_len	= pcan_usb_get_eeprom_len,
+	.get_eeprom = peak_usb_get_eeprom,
+	.set_eeprom = peak_usb_set_eeprom,
 };
 
 /*
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index aa8bcdcfa2fb..4e858d592e59 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -782,6 +782,75 @@ static const struct net_device_ops peak_usb_netdev_ops = {
 	.ndo_change_mtu = can_change_mtu,
 };
 
+/* CAN-USB devices generally handle 32-bit user device id.
+ * In case one doesn't, then it have to overload this function.
+ */
+int peak_usb_get_eeprom_len(struct net_device *netdev)
+{
+	return sizeof(u32);
+}
+
+/* Every CAN-USB device exports the dev_get_user_devid() operation. It is used
+ * here to fill the data buffer with the user defined device number.
+ */
+int peak_usb_get_eeprom(struct net_device *netdev,
+			struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct peak_usb_device *dev = netdev_priv(netdev);
+	u32 devid;
+	int err;
+
+	if (!eeprom->len)
+		return -EINVAL;
+
+	err = dev->adapter->dev_get_user_devid(dev, &devid);
+	if (!err) {
+		memcpy(data, (u8 *)&devid + eeprom->offset, eeprom->len);
+
+		/* update cached value */
+		dev->device_number = devid;
+	}
+
+	return err;
+}
+
+/* Every CAN-USB device exports the dev_get_user_devid()/dev_set_user_devid()
+ * operations. They are used here to set the new user defined device number.
+ */
+int peak_usb_set_eeprom(struct net_device *netdev,
+			struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct peak_usb_device *dev = netdev_priv(netdev);
+	u32 devid;
+	int err;
+
+	if (!eeprom->len)
+		return -EINVAL;
+
+	/* first, read the current user defined device value number */
+	err = dev->adapter->dev_get_user_devid(dev, &devid);
+	if (err) {
+		netdev_err(netdev, "Failed to init device id (err %d)\n", err);
+		return err;
+	}
+
+	/* do update the value with user given bytes */
+	memcpy((u8 *)&devid + eeprom->offset, data, eeprom->len);
+
+	/* flash the new value now */
+	err = dev->adapter->dev_set_user_devid(dev, devid);
+	if (err) {
+		netdev_err(netdev, "Failed to write new device id (err %d)\n",
+			   err);
+		return err;
+	}
+
+	/* update cached value with the new one */
+	dev->device_number = devid;
+
+	return 0;
+}
+
 /*
  * create one device which is attached to CAN controller #ctrl_idx of the
  * usb adapter.
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.h b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
index 7fdc779986f0..4f4394733208 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.h
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
@@ -147,4 +147,10 @@ int peak_usb_netif_rx_64(struct sk_buff *skb, u32 ts_low, u32 ts_high);
 void peak_usb_async_complete(struct urb *urb);
 void peak_usb_restart_complete(struct peak_usb_device *dev);
 
+/* common 32-bit devid ethtool management */
+int peak_usb_get_eeprom_len(struct net_device *netdev);
+int peak_usb_get_eeprom(struct net_device *netdev,
+			struct ethtool_eeprom *eeprom, u8 *data);
+int peak_usb_set_eeprom(struct net_device *netdev,
+			struct ethtool_eeprom *eeprom, u8 *data);
 #endif
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 7440d5b145b5..cec09c7ffce2 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -1072,6 +1072,9 @@ static int pcan_usb_fd_set_phys_id(struct net_device *netdev,
 
 static const struct ethtool_ops pcan_usb_fd_ethtool_ops = {
 	.set_phys_id = pcan_usb_fd_set_phys_id,
+	.get_eeprom_len	= peak_usb_get_eeprom_len,
+	.get_eeprom = peak_usb_get_eeprom,
+	.set_eeprom = peak_usb_set_eeprom,
 };
 
 /* describes the PCAN-USB FD adapter */
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index e98b08746e04..35177a3d1eba 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -1036,6 +1036,9 @@ static int pcan_usb_pro_set_phys_id(struct net_device *netdev,
 
 static const struct ethtool_ops pcan_usb_pro_ethtool_ops = {
 	.set_phys_id = pcan_usb_pro_set_phys_id,
+	.get_eeprom_len	= peak_usb_get_eeprom_len,
+	.get_eeprom = peak_usb_get_eeprom,
+	.set_eeprom = peak_usb_set_eeprom,
 };
 
 /*
-- 
2.25.1

Re: [PATCH 2/6] can: peak_usb: add callback to read user value of CANFD devices

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1740 bytes --]

On 28.01.2022 16:01:53, Stephane Grosjean wrote:
> This patch adds the specific function that allows to read a user defined
> value from the non volatile memory of the USB CANFD interfaces of
> PEAK-System.
> 
> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
> ---
>  drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
> index 65487ec33566..ab1a8b797ece 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
> @@ -420,6 +420,24 @@ static int pcan_usb_fd_set_bittiming_fast(struct peak_usb_device *dev,
>  	return pcan_usb_fd_send_cmd(dev, ++cmd);
>  }
>  
> +/* read user device id from device */
> +static int pcan_usb_fd_get_user_devid(struct peak_usb_device *dev,
> +				      u32 *device_id)
> +{
> +	struct pcan_usb_fd_device *pdev =
> +		container_of(dev, struct pcan_usb_fd_device, dev);
> +	struct pcan_ufd_fw_info *fw_info = &pdev->usb_if->fw_info;
> +	int err;
> +
> +	err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO,
> +				    PCAN_USBPRO_INFO_FW,
> +				    fw_info, sizeof(*fw_info));
> +	if (!err)
> +		*device_id = le32_to_cpu(fw_info->dev_id[dev->ctrl_idx]);

Nitpick: please use the more common return on error:

        if (err)
                return err;

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 4/6] can: peak_usb: allow flashing of user defined value

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1991 bytes --]

On 28.01.2022 16:01:55, Stephane Grosjean wrote:
> This series of patches adds a callback that allows the user to flash a
> self-defined value to all USB - CAN/CANFD interfaces of PEAK-System managed
> by this driver, namely:
> - PCAN-USB
> - PCAN-USB FD
> - PCAN-USB Pro FD
> - PCAN-USB X6
> - PCAN-Chip USB
> - PCAN-USB Pro
> 
> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
> ---
>  drivers/net/can/usb/peak_usb/pcan_usb.c      | 20 +++++++++++++++
>  drivers/net/can/usb/peak_usb/pcan_usb_core.h |  1 +
>  drivers/net/can/usb/peak_usb/pcan_usb_fd.c   | 26 ++++++++++++++++++++
>  drivers/net/can/usb/peak_usb/pcan_usb_pro.c  | 15 +++++++++++
>  drivers/net/can/usb/peak_usb/pcan_usb_pro.h  |  1 +
>  5 files changed, 63 insertions(+)
> 
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
> index 954abf43d552..b29daaab2e6e 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
> @@ -398,6 +398,25 @@ static int pcan_usb_get_user_devid(struct peak_usb_device *dev, u32 *device_id)
>  	return err;
>  }
>  
> +/* set a new user device id in the flash memory of the device */
> +static int pcan_usb_set_user_devid(struct peak_usb_device *dev, u32 devid)
> +{
> +	u8 args[PCAN_USB_CMD_ARGS_LEN];
> +
> +	/* this kind of device supports 8-bit values only */
> +	if (devid > 255)
> +		return -EINVAL;

please use U8_MAX.

> +
> +	/* during the flash process the device disconnects during ~1.25 s.:
> +	 * prohibit access when interface is UP
> +	 */
> +	if (dev->netdev->flags & IFF_UP)
> +		return -EBUSY;
> +
> +	args[0] = (u8)devid;

cast not needed.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6/6] can: peak_usb: add ethtool interface to user defined flashed device number

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 4124 bytes --]

On 28.01.2022 16:01:57, Stephane Grosjean wrote:
> This patch introduces 3 new functions implementing support for eeprom
> access of USB - CAN network interfaces managed by the driver, through the
> ethtool interface. All of them (except the PCAN-USB interface) interpret
> the 4 data bytes as a 32-bit value to be read/write in the non-volatile
> memory of the device. The PCAN-USB only manages a single byte value.
> 
> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
> ---
>  drivers/net/can/usb/peak_usb/pcan_usb.c      |  9 +++
>  drivers/net/can/usb/peak_usb/pcan_usb_core.c | 69 ++++++++++++++++++++
>  drivers/net/can/usb/peak_usb/pcan_usb_core.h |  6 ++
>  drivers/net/can/usb/peak_usb/pcan_usb_fd.c   |  3 +
>  drivers/net/can/usb/peak_usb/pcan_usb_pro.c  |  3 +
>  5 files changed, 90 insertions(+)
> 
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
> index b29daaab2e6e..60c9329701a5 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
> @@ -981,8 +981,17 @@ static int pcan_usb_set_phys_id(struct net_device *netdev,
>  	return err;
>  }
>  
> +/* This device only handles 8-bit user device id. */
> +static int pcan_usb_get_eeprom_len(struct net_device *netdev)
> +{
> +	return sizeof(u8);
> +}
> +
>  static const struct ethtool_ops pcan_usb_ethtool_ops = {
>  	.set_phys_id = pcan_usb_set_phys_id,
> +	.get_eeprom_len	= pcan_usb_get_eeprom_len,
> +	.get_eeprom = peak_usb_get_eeprom,
> +	.set_eeprom = peak_usb_set_eeprom,
>  };
>  
>  /*
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
> index aa8bcdcfa2fb..4e858d592e59 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
> @@ -782,6 +782,75 @@ static const struct net_device_ops peak_usb_netdev_ops = {
>  	.ndo_change_mtu = can_change_mtu,
>  };
>  
> +/* CAN-USB devices generally handle 32-bit user device id.
> + * In case one doesn't, then it have to overload this function.
> + */
> +int peak_usb_get_eeprom_len(struct net_device *netdev)
> +{
> +	return sizeof(u32);
> +}
> +
> +/* Every CAN-USB device exports the dev_get_user_devid() operation. It is used
> + * here to fill the data buffer with the user defined device number.
> + */
> +int peak_usb_get_eeprom(struct net_device *netdev,
> +			struct ethtool_eeprom *eeprom, u8 *data)
> +{
> +	struct peak_usb_device *dev = netdev_priv(netdev);
> +	u32 devid;
> +	int err;
> +
> +	if (!eeprom->len)
> +		return -EINVAL;

There already is a check for len == 0.

> +	err = dev->adapter->dev_get_user_devid(dev, &devid);
> +	if (!err) {

Please return on error.

> +		memcpy(data, (u8 *)&devid + eeprom->offset, eeprom->len);

cast not needed.
> +
> +		/* update cached value */
> +		dev->device_number = devid;
> +	}
> +
> +	return err;
> +}
> +
> +/* Every CAN-USB device exports the dev_get_user_devid()/dev_set_user_devid()
> + * operations. They are used here to set the new user defined device number.
> + */
> +int peak_usb_set_eeprom(struct net_device *netdev,
> +			struct ethtool_eeprom *eeprom, u8 *data)
> +{
> +	struct peak_usb_device *dev = netdev_priv(netdev);
> +	u32 devid;
> +	int err;
> +
> +	if (!eeprom->len)
> +		return -EINVAL;

There already is a check for len == 0.

> +
> +	/* first, read the current user defined device value number */
> +	err = dev->adapter->dev_get_user_devid(dev, &devid);
> +	if (err) {
> +		netdev_err(netdev, "Failed to init device id (err %d)\n", err);
> +		return err;
> +	}
> +
> +	/* do update the value with user given bytes */
> +	memcpy((u8 *)&devid + eeprom->offset, data, eeprom->len);

cast not needed.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH 1/6] can: peak_usb: rename a callback to a more explicit name

[Stephane Grosjean]

The so-called "device id" is in fact a value defined by the user.
Therefore, in order not to confuse it with the device id used by the USB,
the functions for reading this user-defined value are renamed.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
---
 drivers/net/can/usb/peak_usb/pcan_usb.c      | 6 +++---
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 4 ++--
 drivers/net/can/usb/peak_usb/pcan_usb_core.h | 2 +-
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c  | 6 +++---
 4 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
index 837b3fecd71e..9c5ce9575d05 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -380,9 +380,9 @@ static int pcan_usb_get_serial(struct peak_usb_device *dev, u32 *serial_number)
 }
 
 /*
- * read device id from device
+ * read user device id from device
  */
-static int pcan_usb_get_device_id(struct peak_usb_device *dev, u32 *device_id)
+static int pcan_usb_get_user_devid(struct peak_usb_device *dev, u32 *device_id)
 {
 	u8 args[PCAN_USB_CMD_ARGS_LEN];
 	int err;
@@ -1016,7 +1016,7 @@ const struct peak_usb_adapter pcan_usb = {
 	.dev_init = pcan_usb_init,
 	.dev_set_bus = pcan_usb_write_mode,
 	.dev_set_bittiming = pcan_usb_set_bittiming,
-	.dev_get_device_id = pcan_usb_get_device_id,
+	.dev_get_user_devid = pcan_usb_get_user_devid,
 	.dev_decode_buf = pcan_usb_decode_buf,
 	.dev_encode_msg = pcan_usb_encode_msg,
 	.dev_start = pcan_usb_start,
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index 6107fef9f4a0..a83ac4672123 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -883,8 +883,8 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 	}
 
 	/* get device number early */
-	if (dev->adapter->dev_get_device_id)
-		dev->adapter->dev_get_device_id(dev, &dev->device_number);
+	if (dev->adapter->dev_get_user_devid)
+		dev->adapter->dev_get_user_devid(dev, &dev->device_number);
 
 	netdev_info(netdev, "attached to %s channel %u (device %u)\n",
 			peak_usb_adapter->name, ctrl_idx, dev->device_number);
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.h b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
index daa19f57e742..93f5112f1d14 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.h
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
@@ -60,7 +60,7 @@ struct peak_usb_adapter {
 	int (*dev_set_data_bittiming)(struct peak_usb_device *dev,
 				      struct can_bittiming *bt);
 	int (*dev_set_bus)(struct peak_usb_device *dev, u8 onoff);
-	int (*dev_get_device_id)(struct peak_usb_device *dev, u32 *device_id);
+	int (*dev_get_user_devid)(struct peak_usb_device *dev, u32 *device_id);
 	int (*dev_decode_buf)(struct peak_usb_device *dev, struct urb *urb);
 	int (*dev_encode_msg)(struct peak_usb_device *dev, struct sk_buff *skb,
 					u8 *obuf, size_t *size);
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index 858ab22708fc..2716c9a23e51 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -419,8 +419,8 @@ static int pcan_usb_pro_set_led(struct peak_usb_device *dev, u8 mode,
 	return pcan_usb_pro_send_cmd(dev, &um);
 }
 
-static int pcan_usb_pro_get_device_id(struct peak_usb_device *dev,
-				      u32 *device_id)
+static int pcan_usb_pro_get_user_devid(struct peak_usb_device *dev,
+				       u32 *device_id)
 {
 	struct pcan_usb_pro_devid *pdn;
 	struct pcan_usb_pro_msg um;
@@ -1075,7 +1075,7 @@ const struct peak_usb_adapter pcan_usb_pro = {
 	.dev_free = pcan_usb_pro_free,
 	.dev_set_bus = pcan_usb_pro_set_bus,
 	.dev_set_bittiming = pcan_usb_pro_set_bittiming,
-	.dev_get_device_id = pcan_usb_pro_get_device_id,
+	.dev_get_user_devid = pcan_usb_pro_get_user_devid,
 	.dev_decode_buf = pcan_usb_pro_decode_buf,
 	.dev_encode_msg = pcan_usb_pro_encode_msg,
 	.dev_start = pcan_usb_pro_start,
-- 
2.25.1