* [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging
@ 2022-01-29 14:23 Romain Naour
2022-01-29 14:23 ` [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 Romain Naour
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Romain Naour @ 2022-01-29 14:23 UTC (permalink / raw)
To: buildroot; +Cc: Romain Naour
Poke generate a library libpoke.so, so install it to staging.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
---
package/poke/poke.mk | 1 +
1 file changed, 1 insertion(+)
diff --git a/package/poke/poke.mk b/package/poke/poke.mk
index fed023e954..ddd03ae3b0 100644
--- a/package/poke/poke.mk
+++ b/package/poke/poke.mk
@@ -13,6 +13,7 @@ POKE_LICENSE_FILES = COPYING jitter/COPYING
# 0001-configure.ac-HELP2MAN-replace-by-false-when-cross-co.patch
POKE_AUTORECONF = YES
+POKE_INSTALL_STAGING = YES
POKE_DEPENDENCIES = host-flex host-bison host-pkgconf bdwgc readline
# poke bundle gnulib that doesn't support the case where
--
2.31.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 6+ messages in thread* [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 2022-01-29 14:23 [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging Romain Naour @ 2022-01-29 14:23 ` Romain Naour 2022-01-30 14:46 ` Thomas Petazzoni via buildroot 2022-01-29 14:23 ` [Buildroot] [PATCH 3/3] package/poke: bump to version 2.0 Romain Naour 2022-01-30 14:28 ` [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging Thomas Petazzoni via buildroot 2 siblings, 1 reply; 6+ messages in thread From: Romain Naour @ 2022-01-29 14:23 UTC (permalink / raw) To: buildroot; +Cc: Romain Naour Disable minimal-threading when thumb or thumb2 is enabled due to build and runtime issues. After fixing the build issue "Error: invalid swi expression" with upstream, poke fail to run with the following error: # poke ERROR: specialized instruction beghl/retR (opcode 25) is defective but has no replacement [...] Fixes: https://gitlab.com/kubu93/buildroot/-/jobs/2030046871 Reported upstream [1]. [1] https://lists.gnu.org/archive/html/poke-devel/2022-01/msg00162.html Signed-off-by: Romain Naour <romain.naour@gmail.com> --- package/poke/poke.mk | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/package/poke/poke.mk b/package/poke/poke.mk index ddd03ae3b0..91518f5854 100644 --- a/package/poke/poke.mk +++ b/package/poke/poke.mk @@ -46,6 +46,15 @@ POKE_CONF_OPTS = \ --disable-libnbd \ --with-libreadline-prefix=$(STAGING_DIR) +# Disable minimal-threading when thumb or thumb2 is enabled +# due to runtime issue. +# https://lists.gnu.org/archive/html/poke-devel/2022-01/msg00162.html +ifeq ($(BR2_ARM_CPU_HAS_THUMB)$(BR2_ARM_CPU_HAS_THUMB2),y) +POKE_CONF_OPTS += --disable-dispatch-minimal-threading +else +POKE_CONF_OPTS += --enable-dispatch-minimal-threading +endif + ifeq ($(BR2_PACKAGE_JSON_C),y) POKE_DEPENDENCIES += json-c POKE_CONF_OPTS += --enable-mi -- 2.31.1 _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 2022-01-29 14:23 ` [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 Romain Naour @ 2022-01-30 14:46 ` Thomas Petazzoni via buildroot 2022-01-30 17:32 ` Romain Naour 0 siblings, 1 reply; 6+ messages in thread From: Thomas Petazzoni via buildroot @ 2022-01-30 14:46 UTC (permalink / raw) To: Romain Naour; +Cc: buildroot Hello, On Sat, 29 Jan 2022 15:23:51 +0100 Romain Naour <romain.naour@gmail.com> wrote: > +# Disable minimal-threading when thumb or thumb2 is enabled > +# due to runtime issue. > +# https://lists.gnu.org/archive/html/poke-devel/2022-01/msg00162.html > +ifeq ($(BR2_ARM_CPU_HAS_THUMB)$(BR2_ARM_CPU_HAS_THUMB2),y) > +POKE_CONF_OPTS += --disable-dispatch-minimal-threading > +else > +POKE_CONF_OPTS += --enable-dispatch-minimal-threading > +endif I don't understand this patch, because minimal-threading is already disabled by default (at least in poke 1.4, I haven't checked in poke 2.0). jitter/configure.ac contains: # Is the minimal-threading dispatch enabled? Check the default and the # configure command-line option. AC_MSG_CHECKING([if minimal-threading dispatch is enabled]) # FIXME: reenable this when I make defect handling reliable. #default=$(test "x$JITTER_HAVE_ACTUAL_GCC" = "xyes" && echo yes || echo no) default=no AC_ARG_ENABLE([dispatch-minimal-threading], AS_HELP_STRING([--enable-dispatch-minimal-threading], [enable minimal threading dispatch: default yes if and only if GCC (not an imitation) is used]), jitter_enable_dispatch_minimal_threading="$enableval", jitter_enable_dispatch_minimal_threading="$default") if test "x$jitter_enable_dispatch_minimal_threading" = "xyes"; then jitter_best_dispatch_model="minimal-threading" jitter_enabled_dispatch_models="$jitter_enabled_dispatch_models minimal-threading" fi AC_MSG_RESULT([$jitter_enable_dispatch_minimal_threading$jitter_subpackage_disclaimer]) # FIXME: remove this warning message when I make defect handling reliable. if test "x$jitter_enable_dispatch_minimal_threading" = "xyes"; then AC_MSG_WARN([minimal-threading dispatch is currently unreliable, and should not be used in production until defective instruction replacement is fully implemented]) fi See the "default=no" ? Also, when building with the following defconfig: BR2_arm=y BR2_cortex_a8=y BR2_ARM_EABI=y BR2_ARM_INSTRUCTIONS_THUMB2=y BR2_TOOLCHAIN_EXTERNAL=y BR2_INIT_NONE=y BR2_SYSTEM_BIN_SH_NONE=y # BR2_PACKAGE_BUSYBOX is not set BR2_PACKAGE_POKE=y # BR2_TARGET_ROOTFS_TAR is not set The minimal threading is already disabled: checking if switch dispatching is enabled... yes, provisionally (sub-package mode) checking if direct-threading dispatch is enabled... yes, provisionally (sub-package mode) checking if minimal-threading dispatch is enabled... no, provisionally (sub-package mode) checking if no-threading dispatch is enabled... no, provisionally (sub-package mode) configure: sub-package mode: disabling every dispatch except direct-threading configure: (the following dispatches could have been enabled: switch direct-threading) configure: enabled dispatching models are: direct-threading configure: the best enabled dispatching model is: direct-threading So what this patch is doing is in fact slightly the opposite of what he says: instead of disabling minimal threading for thumb or thumb2, it enables it for any other platform. Are you sure this patch was needed for poke 1.4, and not for poke 2.0 ? Best regards, Thomas -- Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 2022-01-30 14:46 ` Thomas Petazzoni via buildroot @ 2022-01-30 17:32 ` Romain Naour 0 siblings, 0 replies; 6+ messages in thread From: Romain Naour @ 2022-01-30 17:32 UTC (permalink / raw) To: Thomas Petazzoni; +Cc: buildroot Hello Thomas, Le 30/01/2022 à 15:46, Thomas Petazzoni a écrit : > Hello, > > On Sat, 29 Jan 2022 15:23:51 +0100 > Romain Naour <romain.naour@gmail.com> wrote: > >> +# Disable minimal-threading when thumb or thumb2 is enabled >> +# due to runtime issue. >> +# https://lists.gnu.org/archive/html/poke-devel/2022-01/msg00162.html >> +ifeq ($(BR2_ARM_CPU_HAS_THUMB)$(BR2_ARM_CPU_HAS_THUMB2),y) >> +POKE_CONF_OPTS += --disable-dispatch-minimal-threading >> +else >> +POKE_CONF_OPTS += --enable-dispatch-minimal-threading >> +endif > > I don't understand this patch, because minimal-threading is already > disabled by default (at least in poke 1.4, I haven't checked in poke > 2.0). jitter/configure.ac contains: > > # Is the minimal-threading dispatch enabled? Check the default and the > # configure command-line option. > AC_MSG_CHECKING([if minimal-threading dispatch is enabled]) > # FIXME: reenable this when I make defect handling reliable. > #default=$(test "x$JITTER_HAVE_ACTUAL_GCC" = "xyes" && echo yes || echo no) > default=no > AC_ARG_ENABLE([dispatch-minimal-threading], > AS_HELP_STRING([--enable-dispatch-minimal-threading], > [enable minimal threading dispatch: default yes if and > only if GCC (not an imitation) is used]), > jitter_enable_dispatch_minimal_threading="$enableval", > jitter_enable_dispatch_minimal_threading="$default") > if test "x$jitter_enable_dispatch_minimal_threading" = "xyes"; then > jitter_best_dispatch_model="minimal-threading" > jitter_enabled_dispatch_models="$jitter_enabled_dispatch_models minimal-threading" > fi > AC_MSG_RESULT([$jitter_enable_dispatch_minimal_threading$jitter_subpackage_disclaimer]) > # FIXME: remove this warning message when I make defect handling reliable. > if test "x$jitter_enable_dispatch_minimal_threading" = "xyes"; then > AC_MSG_WARN([minimal-threading dispatch is currently unreliable, and should > not be used in production until defective instruction replacement is fully > implemented]) > fi > > See the "default=no" ? > > Also, when building with the following defconfig: > > BR2_arm=y > BR2_cortex_a8=y > BR2_ARM_EABI=y > BR2_ARM_INSTRUCTIONS_THUMB2=y > BR2_TOOLCHAIN_EXTERNAL=y > BR2_INIT_NONE=y > BR2_SYSTEM_BIN_SH_NONE=y > # BR2_PACKAGE_BUSYBOX is not set > BR2_PACKAGE_POKE=y > # BR2_TARGET_ROOTFS_TAR is not set > > The minimal threading is already disabled: > > checking if switch dispatching is enabled... yes, provisionally (sub-package mode) > checking if direct-threading dispatch is enabled... yes, provisionally (sub-package mode) > checking if minimal-threading dispatch is enabled... no, provisionally (sub-package mode) > checking if no-threading dispatch is enabled... no, provisionally (sub-package mode) > configure: sub-package mode: disabling every dispatch except > direct-threading > configure: (the following dispatches could have been enabled: > switch direct-threading) > configure: enabled dispatching models are: > direct-threading > configure: the best enabled dispatching model is: > direct-threading > > So what this patch is doing is in fact slightly the opposite of what he > says: instead of disabling minimal threading for thumb or thumb2, it > enables it for any other platform. > > Are you sure this patch was needed for poke 1.4, and not for poke 2.0 ? I overlooked that was disabled by default in poke 1.4. I only checked if this option was present in poke 1.4. So this patch must be merged in the poke version bump. Best regards, Romain > > Best regards, > > Thomas > _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH 3/3] package/poke: bump to version 2.0 2022-01-29 14:23 [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging Romain Naour 2022-01-29 14:23 ` [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 Romain Naour @ 2022-01-29 14:23 ` Romain Naour 2022-01-30 14:28 ` [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging Thomas Petazzoni via buildroot 2 siblings, 0 replies; 6+ messages in thread From: Romain Naour @ 2022-01-29 14:23 UTC (permalink / raw) To: buildroot; +Cc: Romain Naour Tested locally with poke testsuite on aarch64 with Qemu: === poke Summary === # of expected passes 6270 # of unsupported tests 7 See: http://www.jemarch.net/poke-2.0-relnotes.html Tested: https://gitlab.com/kubu93/buildroot/-/pipelines/458943718 Signed-off-by: Romain Naour <romain.naour@gmail.com> --- test-pkg config: BR2_PACKAGE_POKE=y BR2_PACKAGE_JSON_C=y --- ...P2MAN-replace-by-true-when-cross-com.patch | 6 ++-- ...andom.c-fix-build-with-uclibc-1.0.35.patch | 28 +++++++++---------- package/poke/poke.hash | 2 +- package/poke/poke.mk | 2 +- 4 files changed, 19 insertions(+), 19 deletions(-) diff --git a/package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch b/package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch index c169516153..85a76e068e 100644 --- a/package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch +++ b/package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch @@ -1,4 +1,4 @@ -From b35dadae6371c3727cac46ae5bd348b66aa411fc Mon Sep 17 00:00:00 2001 +From 51fb81264323f01a86dd0bdeaf1c7a044a9cb6dc Mon Sep 17 00:00:00 2001 From: Romain Naour <romain.naour@gmail.com> Date: Fri, 30 Apr 2021 15:43:59 +0200 Subject: [PATCH] configure.ac: HELP2MAN replace ':' by 'true' when @@ -17,10 +17,10 @@ Signed-off-by: Romain Naour <romain.naour@gmail.com> 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac -index 2c6f1aef..9c4c9be2 100644 +index a1943b57..c633f719 100644 --- a/configure.ac +++ b/configure.ac -@@ -74,7 +74,7 @@ gl_LIBTEXTSTYLE_OPTIONAL([0.20.5]) +@@ -90,7 +90,7 @@ gl_LIBTEXTSTYLE_OPTIONAL([0.20.5]) if test $cross_compiling = no; then AM_MISSING_PROG(HELP2MAN, help2man) else diff --git a/package/poke/0002-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch b/package/poke/0002-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch index 757dc3f760..bd20b5d2c6 100644 --- a/package/poke/0002-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch +++ b/package/poke/0002-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch @@ -1,4 +1,4 @@ -From a0594387565e1e6b4a8a8ba04ad13b135cc1f0b5 Mon Sep 17 00:00:00 2001 +From 236b019b83228d2e37fa07635fb6864ed7dc5fad Mon Sep 17 00:00:00 2001 From: Fabrice Fontaine <fontaine.fabrice@gmail.com> Date: Thu, 1 Apr 2021 07:49:46 +0200 Subject: [PATCH] lib/getrandom.c: fix build with uclibc < 1.0.35 @@ -15,7 +15,7 @@ In file included from ./sys/random.h:40, /tmp/instance-0/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'? 7 | #include <features.h> +++ |+#include <stddef.h> - 8 | + 8 | This patch is not upstreamable as it is only a workaround for uclibc < 1.0.35, upstream uclibc has been patched with @@ -26,15 +26,15 @@ Fixes: Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> --- - jitter/gnulib-local/getrandom.c | 1 + - gl/getrandom.c | 1 + gl-libpoke/getrandom.c | 1 + + gl/getrandom.c | 1 + + jitter/gnulib-local/getrandom.c | 1 + 3 files changed, 3 insertions(+) -diff --git a/jitter/gnulib-local/getrandom.c b/jitter/gnulib-local/getrandom.c -index 41212fb32..0ad3f9648 100644 ---- a/jitter/gnulib-local/getrandom.c -+++ b/jitter/gnulib-local/getrandom.c +diff --git a/gl-libpoke/getrandom.c b/gl-libpoke/getrandom.c +index e146873..3948d8d 100644 +--- a/gl-libpoke/getrandom.c ++++ b/gl-libpoke/getrandom.c @@ -19,6 +19,7 @@ #include <config.h> @@ -44,7 +44,7 @@ index 41212fb32..0ad3f9648 100644 #include <errno.h> diff --git a/gl/getrandom.c b/gl/getrandom.c -index 41212fb32..0ad3f9648 100644 +index e146873..3948d8d 100644 --- a/gl/getrandom.c +++ b/gl/getrandom.c @@ -19,6 +19,7 @@ @@ -55,10 +55,10 @@ index 41212fb32..0ad3f9648 100644 #include <sys/random.h> #include <errno.h> -diff --git a/gl-libpoke/getrandom.c b/gl-libpoke/getrandom.c -index 41212fb32..0ad3f9648 100644 ---- a/gl-libpoke/getrandom.c -+++ b/gl-libpoke/getrandom.c +diff --git a/jitter/gnulib-local/getrandom.c b/jitter/gnulib-local/getrandom.c +index e146873..3948d8d 100644 +--- a/jitter/gnulib-local/getrandom.c ++++ b/jitter/gnulib-local/getrandom.c @@ -19,6 +19,7 @@ #include <config.h> @@ -68,5 +68,5 @@ index 41212fb32..0ad3f9648 100644 #include <errno.h> -- -2.30.2 +2.31.1 diff --git a/package/poke/poke.hash b/package/poke/poke.hash index 1367262f54..7bf2204c55 100644 --- a/package/poke/poke.hash +++ b/package/poke/poke.hash @@ -1,4 +1,4 @@ # Locally calculated -sha256 ce054df29560c921230132703ee449fe130b6e25ab03aa6cc796bb401506aa24 poke-1.4.tar.gz +sha256 5b822bf3e112c9fb5c0c9ab22a30a45a5d5e4d16e3f7436052bb720aa26b9a58 poke-2.0.tar.gz sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 jitter/COPYING diff --git a/package/poke/poke.mk b/package/poke/poke.mk index 91518f5854..e92d9506ce 100644 --- a/package/poke/poke.mk +++ b/package/poke/poke.mk @@ -4,7 +4,7 @@ # ################################################################################ -POKE_VERSION = 1.4 +POKE_VERSION = 2.0 POKE_SITE = $(BR2_GNU_MIRROR)/poke # gnulib license is a mix/mess of public-domain and various GPL and LGPL versions. POKE_LICENSE = GPL-3.0+, GPL-3.0+ (jitter), gnulib license (gnulib) -- 2.31.1 _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging 2022-01-29 14:23 [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging Romain Naour 2022-01-29 14:23 ` [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 Romain Naour 2022-01-29 14:23 ` [Buildroot] [PATCH 3/3] package/poke: bump to version 2.0 Romain Naour @ 2022-01-30 14:28 ` Thomas Petazzoni via buildroot 2 siblings, 0 replies; 6+ messages in thread From: Thomas Petazzoni via buildroot @ 2022-01-30 14:28 UTC (permalink / raw) To: Romain Naour; +Cc: buildroot On Sat, 29 Jan 2022 15:23:50 +0100 Romain Naour <romain.naour@gmail.com> wrote: > Poke generate a library libpoke.so, so install it to staging. > > Signed-off-by: Romain Naour <romain.naour@gmail.com> > --- > package/poke/poke.mk | 1 + > 1 file changed, 1 insertion(+) Applied to master, thanks. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-01-30 17:32 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-01-29 14:23 [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging Romain Naour 2022-01-29 14:23 ` [Buildroot] [PATCH 2/3] package/poke: disable minimal-threading with thumb or thumb2 Romain Naour 2022-01-30 14:46 ` Thomas Petazzoni via buildroot 2022-01-30 17:32 ` Romain Naour 2022-01-29 14:23 ` [Buildroot] [PATCH 3/3] package/poke: bump to version 2.0 Romain Naour 2022-01-30 14:28 ` [Buildroot] [PATCH 1/3] package/poke: install libpoke.so to staging Thomas Petazzoni via buildroot
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.