All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tinghan Shen <tinghan.shen@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Tinghan Shen <tinghan.shen@mediatek.com>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	<ryder.lee@kernel.org>, <wenst@chromium.org>,
	<chunfeng.yun@mediatek.com>
Subject: [PATCH v10 0/3] Add basic SoC support for mediatek mt8195
Date: Sun, 30 Jan 2022 10:32:06 +0800	[thread overview]
Message-ID: <20220130023209.16275-1-tinghan.shen@mediatek.com> (raw)

This series adds basic SoC support for Mediatek's SoC MT8195.

---
Changes in v10:
  - clean CC list
Changes in v9:
  - remove duplicated cpus dt-bindings patch in v8
Changes in v8:
  - v7 mediatek,spi-mtk-nor.yaml patch is applied in branch for-5.17 at 
    kernel/git/broonie/spi.git
  - v7 pinctrl-mt8195.yaml patch is applied in branch for-next at 
    kernel/git/linusw/linux-pinctrl.git
  - add cortex-a78 compatible to cpus dt-bindings
  - add mediatek,drive-strength-adv property to pinctrl dt-bindings
  - fix evb dts
    - remove i2c nodes with disabled status from dts
    - fix pin properties not match pinctrl dt-bindings
    - remove unnecessary u3port*
  - fix dtsi
    - fix node format
    - reorder oscillator* nodes 
    - fix node name of cpu idle nodes
    - remove clock-frequency property in the timer node
    - reorder clock and clock names in usb nodes
Changes in v7:
  - refine title of spi-nor dt-bindings patch
  - refine commit message of pinctrl dt-bindings patch
  - update pinctrl-mt8195.yaml
    - change property pattern from 'pins' to '^pins'
    - update examples with new property in descriptions
    - add new example
  - drop '_' from node names of pinctrl subnodes in mt8195-evb.dts
Changes in v6:
  - rebase on 5.16-rc1
  - add new clock name to spi-nor dt-bindings
  - add "pins" property in pinctrl dt-bindings
  - fix fails of dtbs_checks
    - remove "arm,armv8" not matched in yaml from cpu compatile
    - fix node name of xhci
    - remvoe xhci upstreaming wakeup properties
    - remove xhci unused properties address-cells and size-cells
    - fix node name of ufs-phy 
    - fix node name of spi-nor
    - fix node name and sub-nodes of pinctrl
    - fix mmc compatible
Changes in v5:
  - enable basic nodes in mt8195-evb.dts
  - remove dedicated clock nodes
  - add mmc2 node
  - fix interrupt number of pinctrl node
  - update clock nodes to apply internal fixes
  - add dt-bindings for perficfg node

v4 thread:
https://lore.kernel.org/all/20210922093303.23720-2-seiya.wang@mediatek.com/
v3 thread:
https://lore.kernel.org/all/20210601075350.31515-2-seiya.wang@mediatek.com/
v2 thread:
https://lore.kernel.org/all/20210319023427.16711-10-seiya.wang@mediatek.com/
v1 thread:
https://lore.kernel.org/all/20210316111443.3332-11-seiya.wang@mediatek.com/
---

Tinghan Shen (3):
  dt-bindings: arm: mediatek: Add mt8195 pericfg compatible
  dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property
  arm64: dts: Add mediatek SoC mt8195 and evaluation board

 .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
 .../bindings/pinctrl/pinctrl-mt8195.yaml      |   35 +
 arch/arm64/boot/dts/mediatek/Makefile         |    1 +
 arch/arm64/boot/dts/mediatek/mt8195-evb.dts   |  161 +++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      | 1049 +++++++++++++++++
 5 files changed, 1247 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi

-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Tinghan Shen <tinghan.shen@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Tinghan Shen <tinghan.shen@mediatek.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	<ryder.lee@kernel.org>, <wenst@chromium.org>,
	<chunfeng.yun@mediatek.com>
Subject: [PATCH v10 0/3] Add basic SoC support for mediatek mt8195
Date: Sun, 30 Jan 2022 10:32:06 +0800	[thread overview]
Message-ID: <20220130023209.16275-1-tinghan.shen@mediatek.com> (raw)

This series adds basic SoC support for Mediatek's SoC MT8195.

---
Changes in v10:
  - clean CC list
Changes in v9:
  - remove duplicated cpus dt-bindings patch in v8
Changes in v8:
  - v7 mediatek,spi-mtk-nor.yaml patch is applied in branch for-5.17 at 
    kernel/git/broonie/spi.git
  - v7 pinctrl-mt8195.yaml patch is applied in branch for-next at 
    kernel/git/linusw/linux-pinctrl.git
  - add cortex-a78 compatible to cpus dt-bindings
  - add mediatek,drive-strength-adv property to pinctrl dt-bindings
  - fix evb dts
    - remove i2c nodes with disabled status from dts
    - fix pin properties not match pinctrl dt-bindings
    - remove unnecessary u3port*
  - fix dtsi
    - fix node format
    - reorder oscillator* nodes 
    - fix node name of cpu idle nodes
    - remove clock-frequency property in the timer node
    - reorder clock and clock names in usb nodes
Changes in v7:
  - refine title of spi-nor dt-bindings patch
  - refine commit message of pinctrl dt-bindings patch
  - update pinctrl-mt8195.yaml
    - change property pattern from 'pins' to '^pins'
    - update examples with new property in descriptions
    - add new example
  - drop '_' from node names of pinctrl subnodes in mt8195-evb.dts
Changes in v6:
  - rebase on 5.16-rc1
  - add new clock name to spi-nor dt-bindings
  - add "pins" property in pinctrl dt-bindings
  - fix fails of dtbs_checks
    - remove "arm,armv8" not matched in yaml from cpu compatile
    - fix node name of xhci
    - remvoe xhci upstreaming wakeup properties
    - remove xhci unused properties address-cells and size-cells
    - fix node name of ufs-phy 
    - fix node name of spi-nor
    - fix node name and sub-nodes of pinctrl
    - fix mmc compatible
Changes in v5:
  - enable basic nodes in mt8195-evb.dts
  - remove dedicated clock nodes
  - add mmc2 node
  - fix interrupt number of pinctrl node
  - update clock nodes to apply internal fixes
  - add dt-bindings for perficfg node

v4 thread:
https://lore.kernel.org/all/20210922093303.23720-2-seiya.wang@mediatek.com/
v3 thread:
https://lore.kernel.org/all/20210601075350.31515-2-seiya.wang@mediatek.com/
v2 thread:
https://lore.kernel.org/all/20210319023427.16711-10-seiya.wang@mediatek.com/
v1 thread:
https://lore.kernel.org/all/20210316111443.3332-11-seiya.wang@mediatek.com/
---

Tinghan Shen (3):
  dt-bindings: arm: mediatek: Add mt8195 pericfg compatible
  dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property
  arm64: dts: Add mediatek SoC mt8195 and evaluation board

 .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
 .../bindings/pinctrl/pinctrl-mt8195.yaml      |   35 +
 arch/arm64/boot/dts/mediatek/Makefile         |    1 +
 arch/arm64/boot/dts/mediatek/mt8195-evb.dts   |  161 +++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      | 1049 +++++++++++++++++
 5 files changed, 1247 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi

-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Tinghan Shen <tinghan.shen@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Tinghan Shen <tinghan.shen@mediatek.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Sean Wang <sean.wang@mediatek.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	<ryder.lee@kernel.org>, <wenst@chromium.org>,
	<chunfeng.yun@mediatek.com>
Subject: [PATCH v10 0/3] Add basic SoC support for mediatek mt8195
Date: Sun, 30 Jan 2022 10:32:06 +0800	[thread overview]
Message-ID: <20220130023209.16275-1-tinghan.shen@mediatek.com> (raw)

This series adds basic SoC support for Mediatek's SoC MT8195.

---
Changes in v10:
  - clean CC list
Changes in v9:
  - remove duplicated cpus dt-bindings patch in v8
Changes in v8:
  - v7 mediatek,spi-mtk-nor.yaml patch is applied in branch for-5.17 at 
    kernel/git/broonie/spi.git
  - v7 pinctrl-mt8195.yaml patch is applied in branch for-next at 
    kernel/git/linusw/linux-pinctrl.git
  - add cortex-a78 compatible to cpus dt-bindings
  - add mediatek,drive-strength-adv property to pinctrl dt-bindings
  - fix evb dts
    - remove i2c nodes with disabled status from dts
    - fix pin properties not match pinctrl dt-bindings
    - remove unnecessary u3port*
  - fix dtsi
    - fix node format
    - reorder oscillator* nodes 
    - fix node name of cpu idle nodes
    - remove clock-frequency property in the timer node
    - reorder clock and clock names in usb nodes
Changes in v7:
  - refine title of spi-nor dt-bindings patch
  - refine commit message of pinctrl dt-bindings patch
  - update pinctrl-mt8195.yaml
    - change property pattern from 'pins' to '^pins'
    - update examples with new property in descriptions
    - add new example
  - drop '_' from node names of pinctrl subnodes in mt8195-evb.dts
Changes in v6:
  - rebase on 5.16-rc1
  - add new clock name to spi-nor dt-bindings
  - add "pins" property in pinctrl dt-bindings
  - fix fails of dtbs_checks
    - remove "arm,armv8" not matched in yaml from cpu compatile
    - fix node name of xhci
    - remvoe xhci upstreaming wakeup properties
    - remove xhci unused properties address-cells and size-cells
    - fix node name of ufs-phy 
    - fix node name of spi-nor
    - fix node name and sub-nodes of pinctrl
    - fix mmc compatible
Changes in v5:
  - enable basic nodes in mt8195-evb.dts
  - remove dedicated clock nodes
  - add mmc2 node
  - fix interrupt number of pinctrl node
  - update clock nodes to apply internal fixes
  - add dt-bindings for perficfg node

v4 thread:
https://lore.kernel.org/all/20210922093303.23720-2-seiya.wang@mediatek.com/
v3 thread:
https://lore.kernel.org/all/20210601075350.31515-2-seiya.wang@mediatek.com/
v2 thread:
https://lore.kernel.org/all/20210319023427.16711-10-seiya.wang@mediatek.com/
v1 thread:
https://lore.kernel.org/all/20210316111443.3332-11-seiya.wang@mediatek.com/
---

Tinghan Shen (3):
  dt-bindings: arm: mediatek: Add mt8195 pericfg compatible
  dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property
  arm64: dts: Add mediatek SoC mt8195 and evaluation board

 .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
 .../bindings/pinctrl/pinctrl-mt8195.yaml      |   35 +
 arch/arm64/boot/dts/mediatek/Makefile         |    1 +
 arch/arm64/boot/dts/mediatek/mt8195-evb.dts   |  161 +++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      | 1049 +++++++++++++++++
 5 files changed, 1247 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi

-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-01-30  2:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-30  2:32 Tinghan Shen [this message]
2022-01-30  2:32 ` [PATCH v10 0/3] Add basic SoC support for mediatek mt8195 Tinghan Shen
2022-01-30  2:32 ` Tinghan Shen
2022-01-30  2:32 ` [PATCH v10 1/3] dt-bindings: arm: mediatek: Add mt8195 pericfg compatible Tinghan Shen
2022-01-30  2:32   ` Tinghan Shen
2022-01-30  2:32   ` Tinghan Shen
2022-01-30  2:32 ` [PATCH v10 2/3] dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property Tinghan Shen
2022-01-30  2:32   ` [PATCH v10 2/3] dt-bindings: pinctrl: mt8195: Add mediatek, drive-strength-adv property Tinghan Shen
2022-01-30  2:32   ` Tinghan Shen
2022-01-30  2:32 ` [PATCH v10 3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board Tinghan Shen
2022-01-30  2:32   ` Tinghan Shen
2022-01-30  2:32   ` Tinghan Shen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220130023209.16275-1-tinghan.shen@mediatek.com \
    --to=tinghan.shen@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=chunfeng.yun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ryder.lee@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.