All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v9 00/13] Add support for Airoha EN7523 SoC
@ 2022-01-30 14:51 ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Matthias Brugger; +Cc: soc, linux-mediatek, linux-arm-kernel, john

This patchset adds support for the Airoha EN7523 SoC, intended primarily
for xPON/xDSL routers.

Felix Fietkau (4):
  clk: en7523: Add clock driver for Airoha EN7523 SoC
  ARM: dts: add clock support for Airoha EN7523
  PCI: mediatek: Allow building for ARCH_AIROHA
  ARM: dts: Add PCIe support for Airoha EN7523

John Crispin (9):
  dt-bindings: Add vendor prefix for Airoha
  dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
  ARM: Add basic support for Airoha EN7523 SoC
  ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
  dt-bindings: Add en7523-scu device tree binding documentation
  dt-bindings: PCI: Add support for Airoha EN7532
  dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
  gpio: Add support for Airoha EN7523 GPIO controller
  ARM: dts: add GPIO support for Airoha EN7523

 .../devicetree/bindings/arm/airoha.yaml       |  28 ++
 .../bindings/clock/airoha,en7523-scu.yaml     |  58 +++
 .../bindings/gpio/airoha,en7523-gpio.yaml     |  67 ++++
 .../devicetree/bindings/pci/mediatek-pcie.txt |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/Kconfig                              |  12 +
 arch/arm/Makefile                             |   1 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/en7523-evb.dts              |  43 +++
 arch/arm/boot/dts/en7523.dtsi                 | 205 ++++++++++
 arch/arm/configs/multi_v7_defconfig           |   1 +
 arch/arm/mach-airoha/Makefile                 |   2 +
 arch/arm/mach-airoha/airoha.c                 |  16 +
 drivers/clk/Kconfig                           |   9 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-en7523.c                      | 350 ++++++++++++++++++
 drivers/gpio/Kconfig                          |  10 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-en7523.c                    | 137 +++++++
 drivers/pci/controller/Kconfig                |   2 +-
 include/dt-bindings/clock/en7523-clk.h        |  17 +
 21 files changed, 964 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
 create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
 create mode 100644 arch/arm/boot/dts/en7523-evb.dts
 create mode 100644 arch/arm/boot/dts/en7523.dtsi
 create mode 100644 arch/arm/mach-airoha/Makefile
 create mode 100644 arch/arm/mach-airoha/airoha.c
 create mode 100644 drivers/clk/clk-en7523.c
 create mode 100644 drivers/gpio/gpio-en7523.c
 create mode 100644 include/dt-bindings/clock/en7523-clk.h

-- 
2.32.0 (Apple Git-132)


^ permalink raw reply	[flat|nested] 69+ messages in thread
* [PATCH v9 00/13] Add support for Airoha EN7523 SoC
@ 2022-01-30 14:51 ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Matthias Brugger; +Cc: soc, linux-mediatek, linux-arm-kernel, john

This patchset adds support for the Airoha EN7523 SoC, intended primarily
for xPON/xDSL routers.

Felix Fietkau (4):
  clk: en7523: Add clock driver for Airoha EN7523 SoC
  ARM: dts: add clock support for Airoha EN7523
  PCI: mediatek: Allow building for ARCH_AIROHA
  ARM: dts: Add PCIe support for Airoha EN7523

John Crispin (9):
  dt-bindings: Add vendor prefix for Airoha
  dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
  ARM: Add basic support for Airoha EN7523 SoC
  ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
  dt-bindings: Add en7523-scu device tree binding documentation
  dt-bindings: PCI: Add support for Airoha EN7532
  dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
  gpio: Add support for Airoha EN7523 GPIO controller
  ARM: dts: add GPIO support for Airoha EN7523

 .../devicetree/bindings/arm/airoha.yaml       |  28 ++
 .../bindings/clock/airoha,en7523-scu.yaml     |  58 +++
 .../bindings/gpio/airoha,en7523-gpio.yaml     |  67 ++++
 .../devicetree/bindings/pci/mediatek-pcie.txt |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/Kconfig                              |  12 +
 arch/arm/Makefile                             |   1 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/en7523-evb.dts              |  43 +++
 arch/arm/boot/dts/en7523.dtsi                 | 205 ++++++++++
 arch/arm/configs/multi_v7_defconfig           |   1 +
 arch/arm/mach-airoha/Makefile                 |   2 +
 arch/arm/mach-airoha/airoha.c                 |  16 +
 drivers/clk/Kconfig                           |   9 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-en7523.c                      | 350 ++++++++++++++++++
 drivers/gpio/Kconfig                          |  10 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-en7523.c                    | 137 +++++++
 drivers/pci/controller/Kconfig                |   2 +-
 include/dt-bindings/clock/en7523-clk.h        |  17 +
 21 files changed, 964 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
 create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
 create mode 100644 arch/arm/boot/dts/en7523-evb.dts
 create mode 100644 arch/arm/boot/dts/en7523.dtsi
 create mode 100644 arch/arm/mach-airoha/Makefile
 create mode 100644 arch/arm/mach-airoha/airoha.c
 create mode 100644 drivers/clk/clk-en7523.c
 create mode 100644 drivers/gpio/gpio-en7523.c
 create mode 100644 include/dt-bindings/clock/en7523-clk.h

-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* [PATCH v9 00/13] Add support for Airoha EN7523 SoC
@ 2022-01-30 14:51 ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Matthias Brugger; +Cc: soc, linux-mediatek, linux-arm-kernel, john

This patchset adds support for the Airoha EN7523 SoC, intended primarily
for xPON/xDSL routers.

Felix Fietkau (4):
  clk: en7523: Add clock driver for Airoha EN7523 SoC
  ARM: dts: add clock support for Airoha EN7523
  PCI: mediatek: Allow building for ARCH_AIROHA
  ARM: dts: Add PCIe support for Airoha EN7523

John Crispin (9):
  dt-bindings: Add vendor prefix for Airoha
  dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
  ARM: Add basic support for Airoha EN7523 SoC
  ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
  dt-bindings: Add en7523-scu device tree binding documentation
  dt-bindings: PCI: Add support for Airoha EN7532
  dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
  gpio: Add support for Airoha EN7523 GPIO controller
  ARM: dts: add GPIO support for Airoha EN7523

 .../devicetree/bindings/arm/airoha.yaml       |  28 ++
 .../bindings/clock/airoha,en7523-scu.yaml     |  58 +++
 .../bindings/gpio/airoha,en7523-gpio.yaml     |  67 ++++
 .../devicetree/bindings/pci/mediatek-pcie.txt |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/Kconfig                              |  12 +
 arch/arm/Makefile                             |   1 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/en7523-evb.dts              |  43 +++
 arch/arm/boot/dts/en7523.dtsi                 | 205 ++++++++++
 arch/arm/configs/multi_v7_defconfig           |   1 +
 arch/arm/mach-airoha/Makefile                 |   2 +
 arch/arm/mach-airoha/airoha.c                 |  16 +
 drivers/clk/Kconfig                           |   9 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-en7523.c                      | 350 ++++++++++++++++++
 drivers/gpio/Kconfig                          |  10 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-en7523.c                    | 137 +++++++
 drivers/pci/controller/Kconfig                |   2 +-
 include/dt-bindings/clock/en7523-clk.h        |  17 +
 21 files changed, 964 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
 create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
 create mode 100644 arch/arm/boot/dts/en7523-evb.dts
 create mode 100644 arch/arm/boot/dts/en7523.dtsi
 create mode 100644 arch/arm/mach-airoha/Makefile
 create mode 100644 arch/arm/mach-airoha/airoha.c
 create mode 100644 drivers/clk/clk-en7523.c
 create mode 100644 drivers/gpio/gpio-en7523.c
 create mode 100644 include/dt-bindings/clock/en7523-clk.h

-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* [PATCH v9 01/13] dt-bindings: Add vendor prefix for Airoha
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Add vendor prefix "airoha" for Airoha, a subsidiary of MediaTek

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eb8ab0d82198..d2f9fd7654bc 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -59,6 +59,8 @@ patternProperties:
     description: Aeroflex Gaisler AB
   "^aesop,.*":
     description: AESOP Embedded Forum
+  "^airoha,.*":
+    description: Airoha
   "^al,.*":
     description: Annapurna Labs
   "^alcatel,.*":
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 01/13] dt-bindings: Add vendor prefix for Airoha
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Add vendor prefix "airoha" for Airoha, a subsidiary of MediaTek

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eb8ab0d82198..d2f9fd7654bc 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -59,6 +59,8 @@ patternProperties:
     description: Aeroflex Gaisler AB
   "^aesop,.*":
     description: AESOP Embedded Forum
+  "^airoha,.*":
+    description: Airoha
   "^al,.*":
     description: Annapurna Labs
   "^alcatel,.*":
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 01/13] dt-bindings: Add vendor prefix for Airoha
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Add vendor prefix "airoha" for Airoha, a subsidiary of MediaTek

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eb8ab0d82198..d2f9fd7654bc 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -59,6 +59,8 @@ patternProperties:
     description: Aeroflex Gaisler AB
   "^aesop,.*":
     description: AESOP Embedded Forum
+  "^airoha,.*":
+    description: Airoha
   "^al,.*":
     description: Annapurna Labs
   "^alcatel,.*":
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 02/13] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring, John Crispin
  Cc: soc, linux-mediatek, linux-arm-kernel, Rob Herring, devicetree,
	linux-kernel

From: John Crispin <john@phrozen.org>

Add devicetree binding for Airoha EN7523 SoC and evaluation board.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../devicetree/bindings/arm/airoha.yaml       | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml

diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..fc19b1a6f37b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms Device Tree Bindings
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+
+additionalProperties: true
+
+...
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 02/13] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring, John Crispin
  Cc: soc, linux-mediatek, linux-arm-kernel, Rob Herring, devicetree,
	linux-kernel

From: John Crispin <john@phrozen.org>

Add devicetree binding for Airoha EN7523 SoC and evaluation board.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../devicetree/bindings/arm/airoha.yaml       | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml

diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..fc19b1a6f37b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms Device Tree Bindings
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+
+additionalProperties: true
+
+...
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 02/13] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring, John Crispin
  Cc: soc, linux-mediatek, linux-arm-kernel, Rob Herring, devicetree,
	linux-kernel

From: John Crispin <john@phrozen.org>

Add devicetree binding for Airoha EN7523 SoC and evaluation board.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../devicetree/bindings/arm/airoha.yaml       | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml

diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..fc19b1a6f37b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms Device Tree Bindings
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+
+additionalProperties: true
+
+...
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring
  Cc: linux-mediatek, linux-arm-kernel, john, linux-kernel, devicetree

From: John Crispin <john@phrozen.org>

EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.

Add basic support for Airoha EN7523, enough for booting to console.

The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/Kconfig                 |  12 ++++
 arch/arm/Makefile                |   1 +
 arch/arm/boot/dts/Makefile       |   2 +
 arch/arm/boot/dts/en7523-evb.dts |  27 +++++++
 arch/arm/boot/dts/en7523.dtsi    | 117 +++++++++++++++++++++++++++++++
 arch/arm/mach-airoha/Makefile    |   2 +
 arch/arm/mach-airoha/airoha.c    |  16 +++++
 7 files changed, 177 insertions(+)
 create mode 100644 arch/arm/boot/dts/en7523-evb.dts
 create mode 100644 arch/arm/boot/dts/en7523.dtsi
 create mode 100644 arch/arm/mach-airoha/Makefile
 create mode 100644 arch/arm/mach-airoha/airoha.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 796fc8017f5d..57ef390d3146 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -572,6 +572,18 @@ config ARCH_VIRT
 	select HAVE_ARM_ARCH_TIMER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	select COMMON_CLK
+	help
+	  Support for Airoha EN7523 SoCs
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77172d555c7e..34baf885573a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e41eca79c950..5c2dd47b58b0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -187,6 +187,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..69754ef9a628
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..f1d4c03aad89
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
new file mode 100644
index 000000000000..a5857d0d02eb
--- /dev/null
+++ b/arch/arm/mach-airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
new file mode 100644
index 000000000000..ea23b5abb478
--- /dev/null
+++ b/arch/arm/mach-airoha/airoha.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree support for Airoha SoCs
+ *
+ * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
+ */
+#include <asm/mach/arch.h>
+
+static const char * const airoha_board_dt_compat[] = {
+	"airoha,en7523",
+	NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
+	.dt_compat	= airoha_board_dt_compat,
+MACHINE_END
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring
  Cc: linux-mediatek, linux-arm-kernel, john, linux-kernel, devicetree

From: John Crispin <john@phrozen.org>

EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.

Add basic support for Airoha EN7523, enough for booting to console.

The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/Kconfig                 |  12 ++++
 arch/arm/Makefile                |   1 +
 arch/arm/boot/dts/Makefile       |   2 +
 arch/arm/boot/dts/en7523-evb.dts |  27 +++++++
 arch/arm/boot/dts/en7523.dtsi    | 117 +++++++++++++++++++++++++++++++
 arch/arm/mach-airoha/Makefile    |   2 +
 arch/arm/mach-airoha/airoha.c    |  16 +++++
 7 files changed, 177 insertions(+)
 create mode 100644 arch/arm/boot/dts/en7523-evb.dts
 create mode 100644 arch/arm/boot/dts/en7523.dtsi
 create mode 100644 arch/arm/mach-airoha/Makefile
 create mode 100644 arch/arm/mach-airoha/airoha.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 796fc8017f5d..57ef390d3146 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -572,6 +572,18 @@ config ARCH_VIRT
 	select HAVE_ARM_ARCH_TIMER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	select COMMON_CLK
+	help
+	  Support for Airoha EN7523 SoCs
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77172d555c7e..34baf885573a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e41eca79c950..5c2dd47b58b0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -187,6 +187,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..69754ef9a628
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..f1d4c03aad89
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
new file mode 100644
index 000000000000..a5857d0d02eb
--- /dev/null
+++ b/arch/arm/mach-airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
new file mode 100644
index 000000000000..ea23b5abb478
--- /dev/null
+++ b/arch/arm/mach-airoha/airoha.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree support for Airoha SoCs
+ *
+ * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
+ */
+#include <asm/mach/arch.h>
+
+static const char * const airoha_board_dt_compat[] = {
+	"airoha,en7523",
+	NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
+	.dt_compat	= airoha_board_dt_compat,
+MACHINE_END
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring
  Cc: linux-mediatek, linux-arm-kernel, john, linux-kernel, devicetree

From: John Crispin <john@phrozen.org>

EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.

Add basic support for Airoha EN7523, enough for booting to console.

The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/Kconfig                 |  12 ++++
 arch/arm/Makefile                |   1 +
 arch/arm/boot/dts/Makefile       |   2 +
 arch/arm/boot/dts/en7523-evb.dts |  27 +++++++
 arch/arm/boot/dts/en7523.dtsi    | 117 +++++++++++++++++++++++++++++++
 arch/arm/mach-airoha/Makefile    |   2 +
 arch/arm/mach-airoha/airoha.c    |  16 +++++
 7 files changed, 177 insertions(+)
 create mode 100644 arch/arm/boot/dts/en7523-evb.dts
 create mode 100644 arch/arm/boot/dts/en7523.dtsi
 create mode 100644 arch/arm/mach-airoha/Makefile
 create mode 100644 arch/arm/mach-airoha/airoha.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 796fc8017f5d..57ef390d3146 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -572,6 +572,18 @@ config ARCH_VIRT
 	select HAVE_ARM_ARCH_TIMER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	select COMMON_CLK
+	help
+	  Support for Airoha EN7523 SoCs
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77172d555c7e..34baf885573a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e41eca79c950..5c2dd47b58b0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -187,6 +187,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..69754ef9a628
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..f1d4c03aad89
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
new file mode 100644
index 000000000000..a5857d0d02eb
--- /dev/null
+++ b/arch/arm/mach-airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
new file mode 100644
index 000000000000..ea23b5abb478
--- /dev/null
+++ b/arch/arm/mach-airoha/airoha.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree support for Airoha SoCs
+ *
+ * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
+ */
+#include <asm/mach/arch.h>
+
+static const char * const airoha_board_dt_compat[] = {
+	"airoha,en7523",
+	NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
+	.dt_compat	= airoha_board_dt_compat,
+MACHINE_END
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 04/13] ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Russell King; +Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel

From: John Crispin <john@phrozen.org>

This enables basic bootup support for the Airoha EN7523 SoC.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 1c2c3e9f0e05..3b413635f5bd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -34,6 +34,7 @@ CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
 CONFIG_MACH_BERLIN_BG2Q=y
 CONFIG_ARCH_DIGICOLOR=y
+CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HISI=y
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 04/13] ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Russell King; +Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel

From: John Crispin <john@phrozen.org>

This enables basic bootup support for the Airoha EN7523 SoC.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 1c2c3e9f0e05..3b413635f5bd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -34,6 +34,7 @@ CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
 CONFIG_MACH_BERLIN_BG2Q=y
 CONFIG_ARCH_DIGICOLOR=y
+CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HISI=y
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 04/13] ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Russell King; +Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel

From: John Crispin <john@phrozen.org>

This enables basic bootup support for the Airoha EN7523 SoC.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 1c2c3e9f0e05..3b413635f5bd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -34,6 +34,7 @@ CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
 CONFIG_MACH_BERLIN_BG2Q=y
 CONFIG_ARCH_DIGICOLOR=y
+CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HISI=y
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 05/13] dt-bindings: Add en7523-scu device tree binding documentation
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	linux-clk, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Adds device tree binding documentation for clocks in the EN7523 SOC.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../bindings/clock/airoha,en7523-scu.yaml     | 58 +++++++++++++++++++
 include/dt-bindings/clock/en7523-clk.h        | 17 ++++++
 2 files changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
 create mode 100644 include/dt-bindings/clock/en7523-clk.h

diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..d60e74654809
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock Device Tree Bindings
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/en7523-clk.h b/include/dt-bindings/clock/en7523-clk.h
new file mode 100644
index 000000000000..717d23a5e5ae
--- /dev/null
+++ b/include/dt-bindings/clock/en7523-clk.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+#define _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+
+#define EN7523_CLK_GSW		0
+#define EN7523_CLK_EMI		1
+#define EN7523_CLK_BUS		2
+#define EN7523_CLK_SLIC		3
+#define EN7523_CLK_SPI		4
+#define EN7523_CLK_NPU		5
+#define EN7523_CLK_CRYPTO	6
+#define EN7523_CLK_PCIE		7
+
+#define EN7523_NUM_CLOCKS	8
+
+#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 05/13] dt-bindings: Add en7523-scu device tree binding documentation
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	linux-clk, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Adds device tree binding documentation for clocks in the EN7523 SOC.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../bindings/clock/airoha,en7523-scu.yaml     | 58 +++++++++++++++++++
 include/dt-bindings/clock/en7523-clk.h        | 17 ++++++
 2 files changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
 create mode 100644 include/dt-bindings/clock/en7523-clk.h

diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..d60e74654809
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock Device Tree Bindings
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/en7523-clk.h b/include/dt-bindings/clock/en7523-clk.h
new file mode 100644
index 000000000000..717d23a5e5ae
--- /dev/null
+++ b/include/dt-bindings/clock/en7523-clk.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+#define _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+
+#define EN7523_CLK_GSW		0
+#define EN7523_CLK_EMI		1
+#define EN7523_CLK_BUS		2
+#define EN7523_CLK_SLIC		3
+#define EN7523_CLK_SPI		4
+#define EN7523_CLK_NPU		5
+#define EN7523_CLK_CRYPTO	6
+#define EN7523_CLK_PCIE		7
+
+#define EN7523_NUM_CLOCKS	8
+
+#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 05/13] dt-bindings: Add en7523-scu device tree binding documentation
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	linux-clk, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Adds device tree binding documentation for clocks in the EN7523 SOC.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../bindings/clock/airoha,en7523-scu.yaml     | 58 +++++++++++++++++++
 include/dt-bindings/clock/en7523-clk.h        | 17 ++++++
 2 files changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
 create mode 100644 include/dt-bindings/clock/en7523-clk.h

diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..d60e74654809
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock Device Tree Bindings
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/en7523-clk.h b/include/dt-bindings/clock/en7523-clk.h
new file mode 100644
index 000000000000..717d23a5e5ae
--- /dev/null
+++ b/include/dt-bindings/clock/en7523-clk.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+#define _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+
+#define EN7523_CLK_GSW		0
+#define EN7523_CLK_EMI		1
+#define EN7523_CLK_BUS		2
+#define EN7523_CLK_SLIC		3
+#define EN7523_CLK_SPI		4
+#define EN7523_CLK_NPU		5
+#define EN7523_CLK_CRYPTO	6
+#define EN7523_CLK_PCIE		7
+
+#define EN7523_NUM_CLOCKS	8
+
+#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 06/13] clk: en7523: Add clock driver for Airoha EN7523 SoC
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel, linux-clk

This driver only registers fixed rate clocks, since the clocks are fully
initialized by the boot loader and should not be changed later, according
to Airoha.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/clk/Kconfig      |   9 +
 drivers/clk/Makefile     |   1 +
 drivers/clk/clk-en7523.c | 350 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 360 insertions(+)
 create mode 100644 drivers/clk/clk-en7523.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c91931c94888..4614d6452fb7 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
 	help
 	  If you say yes here you get support for the CS2000 clock multiplier.
 
+config COMMON_CLK_EN7523
+	bool "Clock driver for Airoha EN7523 SoC system clocks"
+	depends on OF
+	depends on ARCH_AIROHA || COMPILE_TEST
+	default ARCH_AIROHA
+	help
+	  This driver provides the fixed clocks and gates present on Airoha
+	  ARM silicon.
+
 config COMMON_CLK_FSL_FLEXSPI
 	tristate "Clock driver for FlexSPI on Layerscape SoCs"
 	depends on ARCH_LAYERSCAPE || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a9bb2478fbdd..da1e2ac2dfc1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
+obj-$(CONFIG_COMMON_CLK_EN7523)		+= clk-en7523.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI)	+= clk-fsl-flexspi.o
 obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
new file mode 100644
index 000000000000..137e13520ad9
--- /dev/null
+++ b/drivers/clk/clk-en7523.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+#define REG_PCI_CONTROL			0x88
+#define   REG_PCI_CONTROL_PERSTOUT	BIT(29)
+#define   REG_PCI_CONTROL_PERSTOUT1	BIT(26)
+#define   REG_PCI_CONTROL_REFCLK_EN1	BIT(22)
+#define REG_GSW_CLK_DIV_SEL		0x1b4
+#define REG_EMI_CLK_DIV_SEL		0x1b8
+#define REG_BUS_CLK_DIV_SEL		0x1bc
+#define REG_SPI_CLK_DIV_SEL		0x1c4
+#define REG_SPI_CLK_FREQ_SEL		0x1c8
+#define REG_NPU_CLK_DIV_SEL		0x1fc
+#define REG_CRYPTO_CLKSRC		0x200
+#define REG_RESET_CONTROL		0x834
+#define   REG_RESET_CONTROL_PCIEHB	BIT(29)
+#define   REG_RESET_CONTROL_PCIE1	BIT(27)
+#define   REG_RESET_CONTROL_PCIE2	BIT(26)
+
+struct en_clk_desc {
+	int id;
+	const char *name;
+	u32 base_reg;
+	u32 base_bits;
+	u32 base_shift;
+	union {
+		const u32 *base_values;
+		u32 base_value;
+	};
+	int n_base_values;
+
+	u32 div_reg;
+	u32 div_bits;
+	u32 div_shift;
+	u32 div_val0;
+	u32 div_step;
+};
+
+struct en_clk_gate {
+	void __iomem *base;
+	struct clk_hw hw;
+};
+
+static const u32 gsw_base[] = { 400000000, 500000000 };
+static const u32 emi_base[] = { 333000000, 400000000 };
+static const u32 bus_base[] = { 500000000, 540000000 };
+static const u32 slic_base[] = { 100000000, 3125000 };
+static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
+
+static const struct en_clk_desc en7523_base_clks[] = {
+	{
+		.id = EN7523_CLK_GSW,
+		.name = "gsw",
+
+		.base_reg = REG_GSW_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = gsw_base,
+		.n_base_values = ARRAY_SIZE(gsw_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_EMI,
+		.name = "emi",
+
+		.base_reg = REG_EMI_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = emi_base,
+		.n_base_values = ARRAY_SIZE(emi_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_BUS,
+		.name = "bus",
+
+		.base_reg = REG_BUS_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = bus_base,
+		.n_base_values = ARRAY_SIZE(bus_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_SLIC,
+		.name = "slic",
+
+		.base_reg = REG_SPI_CLK_FREQ_SEL,
+		.base_bits = 1,
+		.base_shift = 0,
+		.base_values = slic_base,
+		.n_base_values = ARRAY_SIZE(slic_base),
+
+		.div_reg = REG_SPI_CLK_DIV_SEL,
+		.div_bits = 5,
+		.div_shift = 24,
+		.div_val0 = 20,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_SPI,
+		.name = "spi",
+
+		.base_reg = REG_SPI_CLK_DIV_SEL,
+
+		.base_value = 400000000,
+
+		.div_bits = 5,
+		.div_shift = 8,
+		.div_val0 = 40,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_NPU,
+		.name = "npu",
+
+		.base_reg = REG_NPU_CLK_DIV_SEL,
+		.base_bits = 2,
+		.base_shift = 8,
+		.base_values = npu_base,
+		.n_base_values = ARRAY_SIZE(npu_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_CRYPTO,
+		.name = "crypto",
+
+		.base_reg = REG_CRYPTO_CLKSRC,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = emi_base,
+		.n_base_values = ARRAY_SIZE(emi_base),
+	}
+};
+
+static const struct of_device_id of_match_clk_en7523[] = {
+	{ .compatible = "airoha,en7523-scu", },
+	{ /* sentinel */ }
+};
+
+static u32 en7523_get_base_rate(void __iomem *base, int i)
+{
+	const struct en_clk_desc *desc = &en7523_base_clks[i];
+	u32 val;
+
+	if (!desc->base_bits)
+		return desc->base_value;
+
+	val = readl(base + desc->base_reg);
+	val >>= desc->base_shift;
+	val &= (1 << desc->base_bits) - 1;
+
+	if (val >= desc->n_base_values)
+		return 0;
+
+	return desc->base_values[val];
+}
+
+static u32 en7523_get_div(void __iomem *base, int i)
+{
+	const struct en_clk_desc *desc = &en7523_base_clks[i];
+	u32 reg, val;
+
+	if (!desc->div_bits)
+		return 1;
+
+	reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+	val = readl(base + reg);
+	val >>= desc->div_shift;
+	val &= (1 << desc->div_bits) - 1;
+
+	if (!val && desc->div_val0)
+		return desc->div_val0;
+
+	return (val + 1) * desc->div_step;
+}
+
+static int en7523_pci_is_enabled(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+
+	return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
+}
+
+static int en7523_pci_prepare(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	void __iomem *np_base = cg->base;
+	u32 val, mask;
+
+	/* Need to pull device low before reset */
+	val = readl(np_base + REG_PCI_CONTROL);
+	val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
+	writel(val, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+
+	/* Enable PCIe port 1 */
+	val |= REG_PCI_CONTROL_REFCLK_EN1;
+	writel(val, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+
+	/* Reset to default */
+	val = readl(np_base + REG_RESET_CONTROL);
+	mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
+	       REG_RESET_CONTROL_PCIEHB;
+	writel(val & ~mask, np_base + REG_RESET_CONTROL);
+	usleep_range(1000, 2000);
+	writel(val | mask, np_base + REG_RESET_CONTROL);
+	msleep(100);
+	writel(val & ~mask, np_base + REG_RESET_CONTROL);
+	usleep_range(5000, 10000);
+
+	/* Release device */
+	mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
+	val = readl(np_base + REG_PCI_CONTROL);
+	writel(val & ~mask, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+	writel(val | mask, np_base + REG_PCI_CONTROL);
+	msleep(250);
+
+	return 0;
+}
+
+static void en7523_pci_unprepare(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	void __iomem *np_base = cg->base;
+	u32 val;
+
+	val = readl(np_base + REG_PCI_CONTROL);
+	val &= ~REG_PCI_CONTROL_REFCLK_EN1;
+	writel(val, np_base + REG_PCI_CONTROL);
+}
+
+static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
+					       void __iomem *np_base)
+{
+	static const struct clk_ops pcie_gate_ops = {
+		.is_enabled = en7523_pci_is_enabled,
+		.prepare = en7523_pci_prepare,
+		.unprepare = en7523_pci_unprepare,
+	};
+	struct clk_init_data init = {
+		.name = "pcie",
+		.ops = &pcie_gate_ops,
+	};
+	struct en_clk_gate *cg;
+
+	cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
+	if (!cg)
+		return NULL;
+
+	cg->base = np_base;
+	cg->hw.init = &init;
+	en7523_pci_unprepare(&cg->hw);
+
+	if (clk_hw_register(NULL, &cg->hw))
+		return NULL;
+
+	return &cg->hw;
+}
+
+static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
+				   void __iomem *base, void __iomem *np_base)
+{
+	struct clk_hw *hw;
+	u32 rate;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
+		const struct en_clk_desc *desc = &en7523_base_clks[i];
+
+		rate = en7523_get_base_rate(base, i);
+		rate /= en7523_get_div(base, i);
+
+		hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
+		if (IS_ERR(hw)) {
+			pr_err("Failed to register clk %s: %ld\n",
+			       desc->name, PTR_ERR(hw));
+			continue;
+		}
+
+		clk_data->hws[desc->id] = hw;
+	}
+
+	hw = en7523_register_pcie_clk(dev, np_base);
+	clk_data->hws[EN7523_CLK_PCIE] = hw;
+
+	clk_data->num = EN7523_NUM_CLOCKS;
+}
+
+static int en7523_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct clk_hw_onecell_data *clk_data;
+	void __iomem *base, *np_base;
+	int r;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	np_base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(base))
+		return PTR_ERR(np_base);
+
+	clk_data = devm_kzalloc(&pdev->dev,
+				struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
+				GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
+
+	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	return r;
+}
+
+static struct platform_driver clk_en7523_drv = {
+	.probe = en7523_clk_probe,
+	.driver = {
+		.name = "clk-en7523",
+		.of_match_table = of_match_clk_en7523,
+	},
+};
+
+static int __init clk_en7523_init(void)
+{
+	return platform_driver_register(&clk_en7523_drv);
+}
+
+arch_initcall(clk_en7523_init);
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 06/13] clk: en7523: Add clock driver for Airoha EN7523 SoC
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel, linux-clk

This driver only registers fixed rate clocks, since the clocks are fully
initialized by the boot loader and should not be changed later, according
to Airoha.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/clk/Kconfig      |   9 +
 drivers/clk/Makefile     |   1 +
 drivers/clk/clk-en7523.c | 350 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 360 insertions(+)
 create mode 100644 drivers/clk/clk-en7523.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c91931c94888..4614d6452fb7 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
 	help
 	  If you say yes here you get support for the CS2000 clock multiplier.
 
+config COMMON_CLK_EN7523
+	bool "Clock driver for Airoha EN7523 SoC system clocks"
+	depends on OF
+	depends on ARCH_AIROHA || COMPILE_TEST
+	default ARCH_AIROHA
+	help
+	  This driver provides the fixed clocks and gates present on Airoha
+	  ARM silicon.
+
 config COMMON_CLK_FSL_FLEXSPI
 	tristate "Clock driver for FlexSPI on Layerscape SoCs"
 	depends on ARCH_LAYERSCAPE || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a9bb2478fbdd..da1e2ac2dfc1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
+obj-$(CONFIG_COMMON_CLK_EN7523)		+= clk-en7523.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI)	+= clk-fsl-flexspi.o
 obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
new file mode 100644
index 000000000000..137e13520ad9
--- /dev/null
+++ b/drivers/clk/clk-en7523.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+#define REG_PCI_CONTROL			0x88
+#define   REG_PCI_CONTROL_PERSTOUT	BIT(29)
+#define   REG_PCI_CONTROL_PERSTOUT1	BIT(26)
+#define   REG_PCI_CONTROL_REFCLK_EN1	BIT(22)
+#define REG_GSW_CLK_DIV_SEL		0x1b4
+#define REG_EMI_CLK_DIV_SEL		0x1b8
+#define REG_BUS_CLK_DIV_SEL		0x1bc
+#define REG_SPI_CLK_DIV_SEL		0x1c4
+#define REG_SPI_CLK_FREQ_SEL		0x1c8
+#define REG_NPU_CLK_DIV_SEL		0x1fc
+#define REG_CRYPTO_CLKSRC		0x200
+#define REG_RESET_CONTROL		0x834
+#define   REG_RESET_CONTROL_PCIEHB	BIT(29)
+#define   REG_RESET_CONTROL_PCIE1	BIT(27)
+#define   REG_RESET_CONTROL_PCIE2	BIT(26)
+
+struct en_clk_desc {
+	int id;
+	const char *name;
+	u32 base_reg;
+	u32 base_bits;
+	u32 base_shift;
+	union {
+		const u32 *base_values;
+		u32 base_value;
+	};
+	int n_base_values;
+
+	u32 div_reg;
+	u32 div_bits;
+	u32 div_shift;
+	u32 div_val0;
+	u32 div_step;
+};
+
+struct en_clk_gate {
+	void __iomem *base;
+	struct clk_hw hw;
+};
+
+static const u32 gsw_base[] = { 400000000, 500000000 };
+static const u32 emi_base[] = { 333000000, 400000000 };
+static const u32 bus_base[] = { 500000000, 540000000 };
+static const u32 slic_base[] = { 100000000, 3125000 };
+static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
+
+static const struct en_clk_desc en7523_base_clks[] = {
+	{
+		.id = EN7523_CLK_GSW,
+		.name = "gsw",
+
+		.base_reg = REG_GSW_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = gsw_base,
+		.n_base_values = ARRAY_SIZE(gsw_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_EMI,
+		.name = "emi",
+
+		.base_reg = REG_EMI_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = emi_base,
+		.n_base_values = ARRAY_SIZE(emi_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_BUS,
+		.name = "bus",
+
+		.base_reg = REG_BUS_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = bus_base,
+		.n_base_values = ARRAY_SIZE(bus_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_SLIC,
+		.name = "slic",
+
+		.base_reg = REG_SPI_CLK_FREQ_SEL,
+		.base_bits = 1,
+		.base_shift = 0,
+		.base_values = slic_base,
+		.n_base_values = ARRAY_SIZE(slic_base),
+
+		.div_reg = REG_SPI_CLK_DIV_SEL,
+		.div_bits = 5,
+		.div_shift = 24,
+		.div_val0 = 20,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_SPI,
+		.name = "spi",
+
+		.base_reg = REG_SPI_CLK_DIV_SEL,
+
+		.base_value = 400000000,
+
+		.div_bits = 5,
+		.div_shift = 8,
+		.div_val0 = 40,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_NPU,
+		.name = "npu",
+
+		.base_reg = REG_NPU_CLK_DIV_SEL,
+		.base_bits = 2,
+		.base_shift = 8,
+		.base_values = npu_base,
+		.n_base_values = ARRAY_SIZE(npu_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_CRYPTO,
+		.name = "crypto",
+
+		.base_reg = REG_CRYPTO_CLKSRC,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = emi_base,
+		.n_base_values = ARRAY_SIZE(emi_base),
+	}
+};
+
+static const struct of_device_id of_match_clk_en7523[] = {
+	{ .compatible = "airoha,en7523-scu", },
+	{ /* sentinel */ }
+};
+
+static u32 en7523_get_base_rate(void __iomem *base, int i)
+{
+	const struct en_clk_desc *desc = &en7523_base_clks[i];
+	u32 val;
+
+	if (!desc->base_bits)
+		return desc->base_value;
+
+	val = readl(base + desc->base_reg);
+	val >>= desc->base_shift;
+	val &= (1 << desc->base_bits) - 1;
+
+	if (val >= desc->n_base_values)
+		return 0;
+
+	return desc->base_values[val];
+}
+
+static u32 en7523_get_div(void __iomem *base, int i)
+{
+	const struct en_clk_desc *desc = &en7523_base_clks[i];
+	u32 reg, val;
+
+	if (!desc->div_bits)
+		return 1;
+
+	reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+	val = readl(base + reg);
+	val >>= desc->div_shift;
+	val &= (1 << desc->div_bits) - 1;
+
+	if (!val && desc->div_val0)
+		return desc->div_val0;
+
+	return (val + 1) * desc->div_step;
+}
+
+static int en7523_pci_is_enabled(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+
+	return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
+}
+
+static int en7523_pci_prepare(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	void __iomem *np_base = cg->base;
+	u32 val, mask;
+
+	/* Need to pull device low before reset */
+	val = readl(np_base + REG_PCI_CONTROL);
+	val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
+	writel(val, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+
+	/* Enable PCIe port 1 */
+	val |= REG_PCI_CONTROL_REFCLK_EN1;
+	writel(val, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+
+	/* Reset to default */
+	val = readl(np_base + REG_RESET_CONTROL);
+	mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
+	       REG_RESET_CONTROL_PCIEHB;
+	writel(val & ~mask, np_base + REG_RESET_CONTROL);
+	usleep_range(1000, 2000);
+	writel(val | mask, np_base + REG_RESET_CONTROL);
+	msleep(100);
+	writel(val & ~mask, np_base + REG_RESET_CONTROL);
+	usleep_range(5000, 10000);
+
+	/* Release device */
+	mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
+	val = readl(np_base + REG_PCI_CONTROL);
+	writel(val & ~mask, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+	writel(val | mask, np_base + REG_PCI_CONTROL);
+	msleep(250);
+
+	return 0;
+}
+
+static void en7523_pci_unprepare(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	void __iomem *np_base = cg->base;
+	u32 val;
+
+	val = readl(np_base + REG_PCI_CONTROL);
+	val &= ~REG_PCI_CONTROL_REFCLK_EN1;
+	writel(val, np_base + REG_PCI_CONTROL);
+}
+
+static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
+					       void __iomem *np_base)
+{
+	static const struct clk_ops pcie_gate_ops = {
+		.is_enabled = en7523_pci_is_enabled,
+		.prepare = en7523_pci_prepare,
+		.unprepare = en7523_pci_unprepare,
+	};
+	struct clk_init_data init = {
+		.name = "pcie",
+		.ops = &pcie_gate_ops,
+	};
+	struct en_clk_gate *cg;
+
+	cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
+	if (!cg)
+		return NULL;
+
+	cg->base = np_base;
+	cg->hw.init = &init;
+	en7523_pci_unprepare(&cg->hw);
+
+	if (clk_hw_register(NULL, &cg->hw))
+		return NULL;
+
+	return &cg->hw;
+}
+
+static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
+				   void __iomem *base, void __iomem *np_base)
+{
+	struct clk_hw *hw;
+	u32 rate;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
+		const struct en_clk_desc *desc = &en7523_base_clks[i];
+
+		rate = en7523_get_base_rate(base, i);
+		rate /= en7523_get_div(base, i);
+
+		hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
+		if (IS_ERR(hw)) {
+			pr_err("Failed to register clk %s: %ld\n",
+			       desc->name, PTR_ERR(hw));
+			continue;
+		}
+
+		clk_data->hws[desc->id] = hw;
+	}
+
+	hw = en7523_register_pcie_clk(dev, np_base);
+	clk_data->hws[EN7523_CLK_PCIE] = hw;
+
+	clk_data->num = EN7523_NUM_CLOCKS;
+}
+
+static int en7523_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct clk_hw_onecell_data *clk_data;
+	void __iomem *base, *np_base;
+	int r;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	np_base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(base))
+		return PTR_ERR(np_base);
+
+	clk_data = devm_kzalloc(&pdev->dev,
+				struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
+				GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
+
+	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	return r;
+}
+
+static struct platform_driver clk_en7523_drv = {
+	.probe = en7523_clk_probe,
+	.driver = {
+		.name = "clk-en7523",
+		.of_match_table = of_match_clk_en7523,
+	},
+};
+
+static int __init clk_en7523_init(void)
+{
+	return platform_driver_register(&clk_en7523_drv);
+}
+
+arch_initcall(clk_en7523_init);
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 06/13] clk: en7523: Add clock driver for Airoha EN7523 SoC
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel, linux-clk

This driver only registers fixed rate clocks, since the clocks are fully
initialized by the boot loader and should not be changed later, according
to Airoha.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/clk/Kconfig      |   9 +
 drivers/clk/Makefile     |   1 +
 drivers/clk/clk-en7523.c | 350 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 360 insertions(+)
 create mode 100644 drivers/clk/clk-en7523.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c91931c94888..4614d6452fb7 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
 	help
 	  If you say yes here you get support for the CS2000 clock multiplier.
 
+config COMMON_CLK_EN7523
+	bool "Clock driver for Airoha EN7523 SoC system clocks"
+	depends on OF
+	depends on ARCH_AIROHA || COMPILE_TEST
+	default ARCH_AIROHA
+	help
+	  This driver provides the fixed clocks and gates present on Airoha
+	  ARM silicon.
+
 config COMMON_CLK_FSL_FLEXSPI
 	tristate "Clock driver for FlexSPI on Layerscape SoCs"
 	depends on ARCH_LAYERSCAPE || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a9bb2478fbdd..da1e2ac2dfc1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
+obj-$(CONFIG_COMMON_CLK_EN7523)		+= clk-en7523.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI)	+= clk-fsl-flexspi.o
 obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
new file mode 100644
index 000000000000..137e13520ad9
--- /dev/null
+++ b/drivers/clk/clk-en7523.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+#define REG_PCI_CONTROL			0x88
+#define   REG_PCI_CONTROL_PERSTOUT	BIT(29)
+#define   REG_PCI_CONTROL_PERSTOUT1	BIT(26)
+#define   REG_PCI_CONTROL_REFCLK_EN1	BIT(22)
+#define REG_GSW_CLK_DIV_SEL		0x1b4
+#define REG_EMI_CLK_DIV_SEL		0x1b8
+#define REG_BUS_CLK_DIV_SEL		0x1bc
+#define REG_SPI_CLK_DIV_SEL		0x1c4
+#define REG_SPI_CLK_FREQ_SEL		0x1c8
+#define REG_NPU_CLK_DIV_SEL		0x1fc
+#define REG_CRYPTO_CLKSRC		0x200
+#define REG_RESET_CONTROL		0x834
+#define   REG_RESET_CONTROL_PCIEHB	BIT(29)
+#define   REG_RESET_CONTROL_PCIE1	BIT(27)
+#define   REG_RESET_CONTROL_PCIE2	BIT(26)
+
+struct en_clk_desc {
+	int id;
+	const char *name;
+	u32 base_reg;
+	u32 base_bits;
+	u32 base_shift;
+	union {
+		const u32 *base_values;
+		u32 base_value;
+	};
+	int n_base_values;
+
+	u32 div_reg;
+	u32 div_bits;
+	u32 div_shift;
+	u32 div_val0;
+	u32 div_step;
+};
+
+struct en_clk_gate {
+	void __iomem *base;
+	struct clk_hw hw;
+};
+
+static const u32 gsw_base[] = { 400000000, 500000000 };
+static const u32 emi_base[] = { 333000000, 400000000 };
+static const u32 bus_base[] = { 500000000, 540000000 };
+static const u32 slic_base[] = { 100000000, 3125000 };
+static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
+
+static const struct en_clk_desc en7523_base_clks[] = {
+	{
+		.id = EN7523_CLK_GSW,
+		.name = "gsw",
+
+		.base_reg = REG_GSW_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = gsw_base,
+		.n_base_values = ARRAY_SIZE(gsw_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_EMI,
+		.name = "emi",
+
+		.base_reg = REG_EMI_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = emi_base,
+		.n_base_values = ARRAY_SIZE(emi_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_BUS,
+		.name = "bus",
+
+		.base_reg = REG_BUS_CLK_DIV_SEL,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = bus_base,
+		.n_base_values = ARRAY_SIZE(bus_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_SLIC,
+		.name = "slic",
+
+		.base_reg = REG_SPI_CLK_FREQ_SEL,
+		.base_bits = 1,
+		.base_shift = 0,
+		.base_values = slic_base,
+		.n_base_values = ARRAY_SIZE(slic_base),
+
+		.div_reg = REG_SPI_CLK_DIV_SEL,
+		.div_bits = 5,
+		.div_shift = 24,
+		.div_val0 = 20,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_SPI,
+		.name = "spi",
+
+		.base_reg = REG_SPI_CLK_DIV_SEL,
+
+		.base_value = 400000000,
+
+		.div_bits = 5,
+		.div_shift = 8,
+		.div_val0 = 40,
+		.div_step = 2,
+	}, {
+		.id = EN7523_CLK_NPU,
+		.name = "npu",
+
+		.base_reg = REG_NPU_CLK_DIV_SEL,
+		.base_bits = 2,
+		.base_shift = 8,
+		.base_values = npu_base,
+		.n_base_values = ARRAY_SIZE(npu_base),
+
+		.div_bits = 3,
+		.div_shift = 0,
+		.div_step = 1,
+	}, {
+		.id = EN7523_CLK_CRYPTO,
+		.name = "crypto",
+
+		.base_reg = REG_CRYPTO_CLKSRC,
+		.base_bits = 1,
+		.base_shift = 8,
+		.base_values = emi_base,
+		.n_base_values = ARRAY_SIZE(emi_base),
+	}
+};
+
+static const struct of_device_id of_match_clk_en7523[] = {
+	{ .compatible = "airoha,en7523-scu", },
+	{ /* sentinel */ }
+};
+
+static u32 en7523_get_base_rate(void __iomem *base, int i)
+{
+	const struct en_clk_desc *desc = &en7523_base_clks[i];
+	u32 val;
+
+	if (!desc->base_bits)
+		return desc->base_value;
+
+	val = readl(base + desc->base_reg);
+	val >>= desc->base_shift;
+	val &= (1 << desc->base_bits) - 1;
+
+	if (val >= desc->n_base_values)
+		return 0;
+
+	return desc->base_values[val];
+}
+
+static u32 en7523_get_div(void __iomem *base, int i)
+{
+	const struct en_clk_desc *desc = &en7523_base_clks[i];
+	u32 reg, val;
+
+	if (!desc->div_bits)
+		return 1;
+
+	reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+	val = readl(base + reg);
+	val >>= desc->div_shift;
+	val &= (1 << desc->div_bits) - 1;
+
+	if (!val && desc->div_val0)
+		return desc->div_val0;
+
+	return (val + 1) * desc->div_step;
+}
+
+static int en7523_pci_is_enabled(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+
+	return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
+}
+
+static int en7523_pci_prepare(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	void __iomem *np_base = cg->base;
+	u32 val, mask;
+
+	/* Need to pull device low before reset */
+	val = readl(np_base + REG_PCI_CONTROL);
+	val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
+	writel(val, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+
+	/* Enable PCIe port 1 */
+	val |= REG_PCI_CONTROL_REFCLK_EN1;
+	writel(val, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+
+	/* Reset to default */
+	val = readl(np_base + REG_RESET_CONTROL);
+	mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
+	       REG_RESET_CONTROL_PCIEHB;
+	writel(val & ~mask, np_base + REG_RESET_CONTROL);
+	usleep_range(1000, 2000);
+	writel(val | mask, np_base + REG_RESET_CONTROL);
+	msleep(100);
+	writel(val & ~mask, np_base + REG_RESET_CONTROL);
+	usleep_range(5000, 10000);
+
+	/* Release device */
+	mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
+	val = readl(np_base + REG_PCI_CONTROL);
+	writel(val & ~mask, np_base + REG_PCI_CONTROL);
+	usleep_range(1000, 2000);
+	writel(val | mask, np_base + REG_PCI_CONTROL);
+	msleep(250);
+
+	return 0;
+}
+
+static void en7523_pci_unprepare(struct clk_hw *hw)
+{
+	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+	void __iomem *np_base = cg->base;
+	u32 val;
+
+	val = readl(np_base + REG_PCI_CONTROL);
+	val &= ~REG_PCI_CONTROL_REFCLK_EN1;
+	writel(val, np_base + REG_PCI_CONTROL);
+}
+
+static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
+					       void __iomem *np_base)
+{
+	static const struct clk_ops pcie_gate_ops = {
+		.is_enabled = en7523_pci_is_enabled,
+		.prepare = en7523_pci_prepare,
+		.unprepare = en7523_pci_unprepare,
+	};
+	struct clk_init_data init = {
+		.name = "pcie",
+		.ops = &pcie_gate_ops,
+	};
+	struct en_clk_gate *cg;
+
+	cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
+	if (!cg)
+		return NULL;
+
+	cg->base = np_base;
+	cg->hw.init = &init;
+	en7523_pci_unprepare(&cg->hw);
+
+	if (clk_hw_register(NULL, &cg->hw))
+		return NULL;
+
+	return &cg->hw;
+}
+
+static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
+				   void __iomem *base, void __iomem *np_base)
+{
+	struct clk_hw *hw;
+	u32 rate;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
+		const struct en_clk_desc *desc = &en7523_base_clks[i];
+
+		rate = en7523_get_base_rate(base, i);
+		rate /= en7523_get_div(base, i);
+
+		hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
+		if (IS_ERR(hw)) {
+			pr_err("Failed to register clk %s: %ld\n",
+			       desc->name, PTR_ERR(hw));
+			continue;
+		}
+
+		clk_data->hws[desc->id] = hw;
+	}
+
+	hw = en7523_register_pcie_clk(dev, np_base);
+	clk_data->hws[EN7523_CLK_PCIE] = hw;
+
+	clk_data->num = EN7523_NUM_CLOCKS;
+}
+
+static int en7523_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct clk_hw_onecell_data *clk_data;
+	void __iomem *base, *np_base;
+	int r;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	np_base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(base))
+		return PTR_ERR(np_base);
+
+	clk_data = devm_kzalloc(&pdev->dev,
+				struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
+				GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
+
+	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	if (r)
+		dev_err(&pdev->dev,
+			"could not register clock provider: %s: %d\n",
+			pdev->name, r);
+
+	return r;
+}
+
+static struct platform_driver clk_en7523_drv = {
+	.probe = en7523_clk_probe,
+	.driver = {
+		.name = "clk-en7523",
+		.of_match_table = of_match_clk_en7523,
+	},
+};
+
+static int __init clk_en7523_init(void)
+{
+	return platform_driver_register(&clk_en7523_drv);
+}
+
+arch_initcall(clk_en7523_init);
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 07/13] ARM: dts: add clock support for Airoha EN7523
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

This driver only registers fixed rate clocks, since the clocks are fully
initialized by the boot loader and should not be changed later, according
to Airoha.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index f1d4c03aad89..1e5280be02ba 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -82,6 +83,13 @@ L2_0: l2-cache0 {
 		};
 	};
 
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@9000000 {
 		compatible = "arm,gic-v3";
 		interrupt-controller;
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 07/13] ARM: dts: add clock support for Airoha EN7523
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

This driver only registers fixed rate clocks, since the clocks are fully
initialized by the boot loader and should not be changed later, according
to Airoha.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index f1d4c03aad89..1e5280be02ba 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -82,6 +83,13 @@ L2_0: l2-cache0 {
 		};
 	};
 
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@9000000 {
 		compatible = "arm,gic-v3";
 		interrupt-controller;
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 07/13] ARM: dts: add clock support for Airoha EN7523
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

This driver only registers fixed rate clocks, since the clocks are fully
initialized by the boot loader and should not be changed later, according
to Airoha.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index f1d4c03aad89..1e5280be02ba 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -82,6 +83,13 @@ L2_0: l2-cache0 {
 		};
 	};
 
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic: interrupt-controller@9000000 {
 		compatible = "arm,gic-v3";
 		interrupt-controller;
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 08/13] dt-bindings: PCI: Add support for Airoha EN7532
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Ryder Lee, Jianjun Wang, Bjorn Helgaas, Rob Herring, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	linux-pci, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

EN7532 is an ARM based platform SoC integrating the same PCIe IP as
MT7622, add a binding for it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 Documentation/devicetree/bindings/pci/mediatek-pcie.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 57ae73462272..684227522267 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -7,6 +7,7 @@ Required properties:
 	"mediatek,mt7622-pcie"
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
 - device_type: Must be "pci"
 - reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 08/13] dt-bindings: PCI: Add support for Airoha EN7532
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Ryder Lee, Jianjun Wang, Bjorn Helgaas, Rob Herring, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	linux-pci, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

EN7532 is an ARM based platform SoC integrating the same PCIe IP as
MT7622, add a binding for it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 Documentation/devicetree/bindings/pci/mediatek-pcie.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 57ae73462272..684227522267 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -7,6 +7,7 @@ Required properties:
 	"mediatek,mt7622-pcie"
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
 - device_type: Must be "pci"
 - reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 08/13] dt-bindings: PCI: Add support for Airoha EN7532
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Ryder Lee, Jianjun Wang, Bjorn Helgaas, Rob Herring, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Rob Herring,
	linux-pci, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

EN7532 is an ARM based platform SoC integrating the same PCIe IP as
MT7622, add a binding for it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 Documentation/devicetree/bindings/pci/mediatek-pcie.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 57ae73462272..684227522267 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -7,6 +7,7 @@ Required properties:
 	"mediatek,mt7622-pcie"
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
 - device_type: Must be "pci"
 - reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 09/13] PCI: mediatek: Allow building for ARCH_AIROHA
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Lorenzo Pieralisi, Rob Herring, Krzysztof Wilczyński,
	Bjorn Helgaas, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-pci, linux-kernel

Allow selecting the pcie-mediatek driver if ARCH_AIROHA is set, because the
Airoha EN7523 SoC uses the same controller as MT7622.
The driver itself is not modified. The PCIe controller DT node should use
mediatek,mt7622-pcie after airoha,en7523-pcie.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/pci/controller/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 7fc5135ffbbf..08b0e50dcc12 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -233,7 +233,7 @@ config PCIE_ROCKCHIP_EP
 
 config PCIE_MEDIATEK
 	tristate "MediaTek PCIe controller"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	help
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 09/13] PCI: mediatek: Allow building for ARCH_AIROHA
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Lorenzo Pieralisi, Rob Herring, Krzysztof Wilczyński,
	Bjorn Helgaas, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-pci, linux-kernel

Allow selecting the pcie-mediatek driver if ARCH_AIROHA is set, because the
Airoha EN7523 SoC uses the same controller as MT7622.
The driver itself is not modified. The PCIe controller DT node should use
mediatek,mt7622-pcie after airoha,en7523-pcie.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/pci/controller/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 7fc5135ffbbf..08b0e50dcc12 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -233,7 +233,7 @@ config PCIE_ROCKCHIP_EP
 
 config PCIE_MEDIATEK
 	tristate "MediaTek PCIe controller"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	help
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 09/13] PCI: mediatek: Allow building for ARCH_AIROHA
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Lorenzo Pieralisi, Rob Herring, Krzysztof Wilczyński,
	Bjorn Helgaas, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-pci, linux-kernel

Allow selecting the pcie-mediatek driver if ARCH_AIROHA is set, because the
Airoha EN7523 SoC uses the same controller as MT7622.
The driver itself is not modified. The PCIe controller DT node should use
mediatek,mt7622-pcie after airoha,en7523-pcie.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/pci/controller/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 7fc5135ffbbf..08b0e50dcc12 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -233,7 +233,7 @@ config PCIE_ROCKCHIP_EP
 
 config PCIE_MEDIATEK
 	tristate "MediaTek PCIe controller"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	help
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 10/13] ARM: dts: Add PCIe support for Airoha EN7523
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is nearly
identical to the one in MT7622

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523-evb.dts |  8 +++++
 arch/arm/boot/dts/en7523.dtsi    | 60 ++++++++++++++++++++++++++++++++
 2 files changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index 69754ef9a628..0a79f5f6c311 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -25,3 +25,11 @@ memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index 1e5280be02ba..b897fb6cffd2 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -122,4 +122,64 @@ uart1: serial@1fbf0000 {
 		clock-frequency = <1843200>;
 		status = "okay";
 	};
+
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
 };
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 10/13] ARM: dts: Add PCIe support for Airoha EN7523
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is nearly
identical to the one in MT7622

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523-evb.dts |  8 +++++
 arch/arm/boot/dts/en7523.dtsi    | 60 ++++++++++++++++++++++++++++++++
 2 files changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index 69754ef9a628..0a79f5f6c311 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -25,3 +25,11 @@ memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index 1e5280be02ba..b897fb6cffd2 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -122,4 +122,64 @@ uart1: serial@1fbf0000 {
 		clock-frequency = <1843200>;
 		status = "okay";
 	};
+
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
 };
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 10/13] ARM: dts: Add PCIe support for Airoha EN7523
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring, Matthias Brugger
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is nearly
identical to the one in MT7622

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523-evb.dts |  8 +++++
 arch/arm/boot/dts/en7523.dtsi    | 60 ++++++++++++++++++++++++++++++++
 2 files changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index 69754ef9a628..0a79f5f6c311 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -25,3 +25,11 @@ memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index 1e5280be02ba..b897fb6cffd2 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -122,4 +122,64 @@ uart1: serial@1fbf0000 {
 		clock-frequency = <1843200>;
 		status = "okay";
 	};
+
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
 };
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 11/13] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Rob Herring, John Crispin
  Cc: soc, linux-mediatek, linux-arm-kernel, Rob Herring, linux-gpio,
	devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../bindings/gpio/airoha,en7523-gpio.yaml     | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml

diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..66c00ec85731
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+
+...
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 11/13] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Rob Herring, John Crispin
  Cc: soc, linux-mediatek, linux-arm-kernel, Rob Herring, linux-gpio,
	devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../bindings/gpio/airoha,en7523-gpio.yaml     | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml

diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..66c00ec85731
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+
+...
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 11/13] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski, Rob Herring, John Crispin
  Cc: soc, linux-mediatek, linux-arm-kernel, Rob Herring, linux-gpio,
	devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../bindings/gpio/airoha,en7523-gpio.yaml     | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml

diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..66c00ec85731
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+
+...
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Andy Shevchenko,
	linux-kernel, linux-gpio

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs. Each instance in DT is for a single bank.

Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/gpio/Kconfig       |  10 +++
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-en7523.c | 137 +++++++++++++++++++++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 drivers/gpio/gpio-en7523.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 60d9374c72c0..0e9aacbcb4bd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -247,6 +247,16 @@ config GPIO_EM
 	help
 	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.
 
+config GPIO_EN7523
+	tristate "Airoha GPIO support"
+	depends on ARCH_AIROHA
+	default ARCH_AIROHA
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y or M here to support the GPIO controller block on the
+	  Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
+
 config GPIO_EP93XX
 	def_bool y
 	depends on ARCH_EP93XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 71ee9fc2ff83..d2269ee0948e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2)			+= gpio-dln2.o
 obj-$(CONFIG_GPIO_DWAPB)		+= gpio-dwapb.o
 obj-$(CONFIG_GPIO_EIC_SPRD)		+= gpio-eic-sprd.o
 obj-$(CONFIG_GPIO_EM)			+= gpio-em.o
+obj-$(CONFIG_GPIO_EN7523)		+= gpio-en7523.o
 obj-$(CONFIG_GPIO_EP93XX)		+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXAR)			+= gpio-exar.o
 obj-$(CONFIG_GPIO_F7188X)		+= gpio-f7188x.o
diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
new file mode 100644
index 000000000000..f836a8db4c1d
--- /dev/null
+++ b/drivers/gpio/gpio-en7523.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define AIROHA_GPIO_MAX		32
+
+/**
+ * airoha_gpio_ctrl - Airoha GPIO driver data
+ * @gc: Associated gpio_chip instance.
+ * @data: The data register.
+ * @dir0: The direction register for the lower 16 pins.
+ * @dir1: The direction register for the higher 16 pins.
+ * @output: The output enable register.
+ */
+struct airoha_gpio_ctrl {
+	struct gpio_chip gc;
+	void __iomem *data;
+	void __iomem *dir[2];
+	void __iomem *output;
+};
+
+static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
+{
+	return container_of(gc, struct airoha_gpio_ctrl, gc);
+}
+
+static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
+			  int val, int out)
+{
+	struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+	u32 dir = ioread32(ctrl->dir[gpio / 16]);
+	u32 output = ioread32(ctrl->output);
+	u32 mask = BIT((gpio % 16) * 2);
+
+	if (out) {
+		dir |= mask;
+		output |= BIT(gpio);
+	} else {
+		dir &= ~mask;
+		output &= ~BIT(gpio);
+	}
+
+	iowrite32(dir, ctrl->dir[gpio / 16]);
+
+	if (out)
+		gc->set(gc, gpio, val);
+
+	iowrite32(output, ctrl->output);
+
+	return 0;
+}
+
+static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
+			  int val)
+{
+	return airoha_dir_set(gc, gpio, val, 1);
+}
+
+static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	return airoha_dir_set(gc, gpio, 0, 0);
+}
+
+static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+	u32 dir = ioread32(ctrl->dir[gpio / 16]);
+	u32 mask = BIT((gpio % 16) * 2);
+
+	return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
+static int airoha_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct airoha_gpio_ctrl *ctrl;
+	int err;
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->data = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ctrl->data))
+		return PTR_ERR(ctrl->data);
+
+	ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(ctrl->dir[0]))
+		return PTR_ERR(ctrl->dir[0]);
+
+	ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
+	if (IS_ERR(ctrl->dir[1]))
+		return PTR_ERR(ctrl->dir[1]);
+
+	ctrl->output = devm_platform_ioremap_resource(pdev, 3);
+	if (IS_ERR(ctrl->output))
+		return PTR_ERR(ctrl->output);
+
+	err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
+			 NULL, NULL, NULL, 0);
+	if (err)
+		return dev_err_probe(dev, err, "unable to init generic GPIO");
+
+	ctrl->gc.ngpio = AIROHA_GPIO_MAX;
+	ctrl->gc.owner = THIS_MODULE;
+	ctrl->gc.direction_output = airoha_dir_out;
+	ctrl->gc.direction_input = airoha_dir_in;
+	ctrl->gc.get_direction = airoha_get_dir;
+
+	return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static const struct of_device_id airoha_gpio_of_match[] = {
+	{ .compatible = "airoha,en7523-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
+
+static struct platform_driver airoha_gpio_driver = {
+	.driver = {
+		.name = "airoha-gpio",
+		.of_match_table	= airoha_gpio_of_match,
+	},
+	.probe = airoha_gpio_probe,
+};
+module_platform_driver(airoha_gpio_driver);
+
+MODULE_DESCRIPTION("Airoha GPIO support");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Andy Shevchenko,
	linux-kernel, linux-gpio

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs. Each instance in DT is for a single bank.

Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/gpio/Kconfig       |  10 +++
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-en7523.c | 137 +++++++++++++++++++++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 drivers/gpio/gpio-en7523.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 60d9374c72c0..0e9aacbcb4bd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -247,6 +247,16 @@ config GPIO_EM
 	help
 	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.
 
+config GPIO_EN7523
+	tristate "Airoha GPIO support"
+	depends on ARCH_AIROHA
+	default ARCH_AIROHA
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y or M here to support the GPIO controller block on the
+	  Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
+
 config GPIO_EP93XX
 	def_bool y
 	depends on ARCH_EP93XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 71ee9fc2ff83..d2269ee0948e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2)			+= gpio-dln2.o
 obj-$(CONFIG_GPIO_DWAPB)		+= gpio-dwapb.o
 obj-$(CONFIG_GPIO_EIC_SPRD)		+= gpio-eic-sprd.o
 obj-$(CONFIG_GPIO_EM)			+= gpio-em.o
+obj-$(CONFIG_GPIO_EN7523)		+= gpio-en7523.o
 obj-$(CONFIG_GPIO_EP93XX)		+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXAR)			+= gpio-exar.o
 obj-$(CONFIG_GPIO_F7188X)		+= gpio-f7188x.o
diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
new file mode 100644
index 000000000000..f836a8db4c1d
--- /dev/null
+++ b/drivers/gpio/gpio-en7523.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define AIROHA_GPIO_MAX		32
+
+/**
+ * airoha_gpio_ctrl - Airoha GPIO driver data
+ * @gc: Associated gpio_chip instance.
+ * @data: The data register.
+ * @dir0: The direction register for the lower 16 pins.
+ * @dir1: The direction register for the higher 16 pins.
+ * @output: The output enable register.
+ */
+struct airoha_gpio_ctrl {
+	struct gpio_chip gc;
+	void __iomem *data;
+	void __iomem *dir[2];
+	void __iomem *output;
+};
+
+static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
+{
+	return container_of(gc, struct airoha_gpio_ctrl, gc);
+}
+
+static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
+			  int val, int out)
+{
+	struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+	u32 dir = ioread32(ctrl->dir[gpio / 16]);
+	u32 output = ioread32(ctrl->output);
+	u32 mask = BIT((gpio % 16) * 2);
+
+	if (out) {
+		dir |= mask;
+		output |= BIT(gpio);
+	} else {
+		dir &= ~mask;
+		output &= ~BIT(gpio);
+	}
+
+	iowrite32(dir, ctrl->dir[gpio / 16]);
+
+	if (out)
+		gc->set(gc, gpio, val);
+
+	iowrite32(output, ctrl->output);
+
+	return 0;
+}
+
+static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
+			  int val)
+{
+	return airoha_dir_set(gc, gpio, val, 1);
+}
+
+static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	return airoha_dir_set(gc, gpio, 0, 0);
+}
+
+static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+	u32 dir = ioread32(ctrl->dir[gpio / 16]);
+	u32 mask = BIT((gpio % 16) * 2);
+
+	return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
+static int airoha_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct airoha_gpio_ctrl *ctrl;
+	int err;
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->data = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ctrl->data))
+		return PTR_ERR(ctrl->data);
+
+	ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(ctrl->dir[0]))
+		return PTR_ERR(ctrl->dir[0]);
+
+	ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
+	if (IS_ERR(ctrl->dir[1]))
+		return PTR_ERR(ctrl->dir[1]);
+
+	ctrl->output = devm_platform_ioremap_resource(pdev, 3);
+	if (IS_ERR(ctrl->output))
+		return PTR_ERR(ctrl->output);
+
+	err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
+			 NULL, NULL, NULL, 0);
+	if (err)
+		return dev_err_probe(dev, err, "unable to init generic GPIO");
+
+	ctrl->gc.ngpio = AIROHA_GPIO_MAX;
+	ctrl->gc.owner = THIS_MODULE;
+	ctrl->gc.direction_output = airoha_dir_out;
+	ctrl->gc.direction_input = airoha_dir_in;
+	ctrl->gc.get_direction = airoha_get_dir;
+
+	return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static const struct of_device_id airoha_gpio_of_match[] = {
+	{ .compatible = "airoha,en7523-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
+
+static struct platform_driver airoha_gpio_driver = {
+	.driver = {
+		.name = "airoha-gpio",
+		.of_match_table	= airoha_gpio_of_match,
+	},
+	.probe = airoha_gpio_probe,
+};
+module_platform_driver(airoha_gpio_driver);
+
+MODULE_DESCRIPTION("Airoha GPIO support");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Linus Walleij, Bartosz Golaszewski
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Andy Shevchenko,
	linux-kernel, linux-gpio

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs. Each instance in DT is for a single bank.

Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/gpio/Kconfig       |  10 +++
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-en7523.c | 137 +++++++++++++++++++++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 drivers/gpio/gpio-en7523.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 60d9374c72c0..0e9aacbcb4bd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -247,6 +247,16 @@ config GPIO_EM
 	help
 	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.
 
+config GPIO_EN7523
+	tristate "Airoha GPIO support"
+	depends on ARCH_AIROHA
+	default ARCH_AIROHA
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y or M here to support the GPIO controller block on the
+	  Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
+
 config GPIO_EP93XX
 	def_bool y
 	depends on ARCH_EP93XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 71ee9fc2ff83..d2269ee0948e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2)			+= gpio-dln2.o
 obj-$(CONFIG_GPIO_DWAPB)		+= gpio-dwapb.o
 obj-$(CONFIG_GPIO_EIC_SPRD)		+= gpio-eic-sprd.o
 obj-$(CONFIG_GPIO_EM)			+= gpio-em.o
+obj-$(CONFIG_GPIO_EN7523)		+= gpio-en7523.o
 obj-$(CONFIG_GPIO_EP93XX)		+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXAR)			+= gpio-exar.o
 obj-$(CONFIG_GPIO_F7188X)		+= gpio-f7188x.o
diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
new file mode 100644
index 000000000000..f836a8db4c1d
--- /dev/null
+++ b/drivers/gpio/gpio-en7523.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define AIROHA_GPIO_MAX		32
+
+/**
+ * airoha_gpio_ctrl - Airoha GPIO driver data
+ * @gc: Associated gpio_chip instance.
+ * @data: The data register.
+ * @dir0: The direction register for the lower 16 pins.
+ * @dir1: The direction register for the higher 16 pins.
+ * @output: The output enable register.
+ */
+struct airoha_gpio_ctrl {
+	struct gpio_chip gc;
+	void __iomem *data;
+	void __iomem *dir[2];
+	void __iomem *output;
+};
+
+static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
+{
+	return container_of(gc, struct airoha_gpio_ctrl, gc);
+}
+
+static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
+			  int val, int out)
+{
+	struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+	u32 dir = ioread32(ctrl->dir[gpio / 16]);
+	u32 output = ioread32(ctrl->output);
+	u32 mask = BIT((gpio % 16) * 2);
+
+	if (out) {
+		dir |= mask;
+		output |= BIT(gpio);
+	} else {
+		dir &= ~mask;
+		output &= ~BIT(gpio);
+	}
+
+	iowrite32(dir, ctrl->dir[gpio / 16]);
+
+	if (out)
+		gc->set(gc, gpio, val);
+
+	iowrite32(output, ctrl->output);
+
+	return 0;
+}
+
+static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
+			  int val)
+{
+	return airoha_dir_set(gc, gpio, val, 1);
+}
+
+static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	return airoha_dir_set(gc, gpio, 0, 0);
+}
+
+static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+	u32 dir = ioread32(ctrl->dir[gpio / 16]);
+	u32 mask = BIT((gpio % 16) * 2);
+
+	return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
+static int airoha_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct airoha_gpio_ctrl *ctrl;
+	int err;
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->data = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ctrl->data))
+		return PTR_ERR(ctrl->data);
+
+	ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(ctrl->dir[0]))
+		return PTR_ERR(ctrl->dir[0]);
+
+	ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
+	if (IS_ERR(ctrl->dir[1]))
+		return PTR_ERR(ctrl->dir[1]);
+
+	ctrl->output = devm_platform_ioremap_resource(pdev, 3);
+	if (IS_ERR(ctrl->output))
+		return PTR_ERR(ctrl->output);
+
+	err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
+			 NULL, NULL, NULL, 0);
+	if (err)
+		return dev_err_probe(dev, err, "unable to init generic GPIO");
+
+	ctrl->gc.ngpio = AIROHA_GPIO_MAX;
+	ctrl->gc.owner = THIS_MODULE;
+	ctrl->gc.direction_output = airoha_dir_out;
+	ctrl->gc.direction_input = airoha_dir_in;
+	ctrl->gc.get_direction = airoha_get_dir;
+
+	return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static const struct of_device_id airoha_gpio_of_match[] = {
+	{ .compatible = "airoha,en7523-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
+
+static struct platform_driver airoha_gpio_driver = {
+	.driver = {
+		.name = "airoha-gpio",
+		.of_match_table	= airoha_gpio_of_match,
+	},
+	.probe = airoha_gpio_probe,
+};
+module_platform_driver(airoha_gpio_driver);
+
+MODULE_DESCRIPTION("Airoha GPIO support");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 13/13] ARM: dts: add GPIO support for Airoha EN7523
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-01-30 14:51   ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523-evb.dts |  8 ++++++++
 arch/arm/boot/dts/en7523.dtsi    | 20 ++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index 0a79f5f6c311..cd9cded5b564 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -33,3 +33,11 @@ &pcie0 {
 &pcie1 {
 	status = "okay";
 };
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index b897fb6cffd2..8932e2ab96b6 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -123,6 +124,25 @@ uart1: serial@1fbf0000 {
 		status = "okay";
 	};
 
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 
 	pcie0: pcie@1fa91000 {
 		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
-- 
2.32.0 (Apple Git-132)


^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 13/13] ARM: dts: add GPIO support for Airoha EN7523
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523-evb.dts |  8 ++++++++
 arch/arm/boot/dts/en7523.dtsi    | 20 ++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index 0a79f5f6c311..cd9cded5b564 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -33,3 +33,11 @@ &pcie0 {
 &pcie1 {
 	status = "okay";
 };
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index b897fb6cffd2..8932e2ab96b6 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -123,6 +124,25 @@ uart1: serial@1fbf0000 {
 		status = "okay";
 	};
 
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 
 	pcie0: pcie@1fa91000 {
 		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
-- 
2.32.0 (Apple Git-132)


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* [PATCH v9 13/13] ARM: dts: add GPIO support for Airoha EN7523
@ 2022-01-30 14:51   ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-30 14:51 UTC (permalink / raw)
  To: Rob Herring
  Cc: soc, linux-mediatek, linux-arm-kernel, john, devicetree, linux-kernel

From: John Crispin <john@phrozen.org>

Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 arch/arm/boot/dts/en7523-evb.dts |  8 ++++++++
 arch/arm/boot/dts/en7523.dtsi    | 20 ++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index 0a79f5f6c311..cd9cded5b564 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -33,3 +33,11 @@ &pcie0 {
 &pcie1 {
 	status = "okay";
 };
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index b897fb6cffd2..8932e2ab96b6 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -123,6 +124,25 @@ uart1: serial@1fbf0000 {
 		status = "okay";
 	};
 
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 
 	pcie0: pcie@1fa91000 {
 		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
-- 
2.32.0 (Apple Git-132)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
  2022-01-30 14:51   ` Felix Fietkau
  (?)
@ 2022-01-31 10:51     ` Luka Perkov
  -1 siblings, 0 replies; 69+ messages in thread
From: Luka Perkov @ 2022-01-31 10:51 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring,
	linux-mediatek, Linux ARM, John Crispin, linux-kernel,
	devicetree, Robert Marko

Hello Felix,

On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> EN7523 is an armv8 based silicon used inside broadband access type devices
> such as xPON and xDSL. It shares various silicon blocks with MediaTek
> silicon such as the MT7622.
>
> Add basic support for Airoha EN7523, enough for booting to console.
>
> The UART is basically 8250-compatible, except for the clock selection.
> A clock-frequency value is synthesized to get this to run at 115200 bps.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  arch/arm/Kconfig                 |  12 ++++
>  arch/arm/Makefile                |   1 +
>  arch/arm/boot/dts/Makefile       |   2 +
>  arch/arm/boot/dts/en7523-evb.dts |  27 +++++++
>  arch/arm/boot/dts/en7523.dtsi    | 117 +++++++++++++++++++++++++++++++
>  arch/arm/mach-airoha/Makefile    |   2 +
>  arch/arm/mach-airoha/airoha.c    |  16 +++++
>  7 files changed, 177 insertions(+)
>  create mode 100644 arch/arm/boot/dts/en7523-evb.dts
>  create mode 100644 arch/arm/boot/dts/en7523.dtsi
>  create mode 100644 arch/arm/mach-airoha/Makefile
>  create mode 100644 arch/arm/mach-airoha/airoha.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 796fc8017f5d..57ef390d3146 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -572,6 +572,18 @@ config ARCH_VIRT
>         select HAVE_ARM_ARCH_TIMER
>         select ARCH_SUPPORTS_BIG_ENDIAN
>
> +config ARCH_AIROHA
> +       bool "Airoha SoC Support"
> +       depends on ARCH_MULTI_V7
> +       select ARM_AMBA
> +       select ARM_GIC
> +       select ARM_GIC_V3
> +       select ARM_PSCI
> +       select HAVE_ARM_ARCH_TIMER
> +       select COMMON_CLK
> +       help
> +         Support for Airoha EN7523 SoCs
> +
>  #
>  # This is sorted alphabetically by mach-* pathname.  However, plat-*
>  # Kconfigs may be included either alphabetically (according to the
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 77172d555c7e..34baf885573a 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
>  # Machine directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
>  machine-$(CONFIG_ARCH_ACTIONS)         += actions
> +machine-$(CONFIG_ARCH_AIROHA)          += airoha
>  machine-$(CONFIG_ARCH_ALPINE)          += alpine
>  machine-$(CONFIG_ARCH_ARTPEC)          += artpec
>  machine-$(CONFIG_ARCH_ASPEED)           += aspeed
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e41eca79c950..5c2dd47b58b0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -187,6 +187,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
>         da850-lego-ev3.dtb
>  dtb-$(CONFIG_ARCH_DIGICOLOR) += \
>         cx92755_equinox.dtb
> +dtb-$(CONFIG_ARCH_AIROHA) += \
> +       en7523-evb.dtb
>  dtb-$(CONFIG_ARCH_EXYNOS3) += \
>         exynos3250-artik5-eval.dtb \
>         exynos3250-monk.dtb \
> diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
> new file mode 100644
> index 000000000000..69754ef9a628
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523-evb.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/dts-v1/;
> +
> +/* Bootloader installs ATF here */
> +/memreserve/ 0x80000000 0x200000;
> +
> +#include "en7523.dtsi"
> +
> +/ {
> +       model = "Airoha EN7523 Evaluation Board";
> +       compatible = "airoha,en7523-evb", "airoha,en7523";
> +
> +       aliases {
> +               serial0 = &uart1;
> +       };
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200 earlycon";
> +               stdout-path = "serial0:115200n8";
> +               linux,usable-memory-range = <0x80200000 0x1fe00000>;
> +       };
> +
> +       memory@80000000 {
> +               device_type = "memory";
> +               reg = <0x80000000 0x20000000>;
> +       };
> +};
> diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
> new file mode 100644
> index 000000000000..f1d4c03aad89
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523.dtsi
> @@ -0,0 +1,117 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +       interrupt-parent = <&gic>;
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +
> +       reserved-memory {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               npu_binary@84000000 {
> +                       no-map;
> +                       reg = <0x84000000 0xA00000>;
> +               };
> +
> +               npu_flag@84B0000 {
> +                       no-map;
> +                       reg = <0x84B00000 0x100000>;
> +               };
> +
> +               npu_pkt@85000000 {
> +                       no-map;
> +                       reg = <0x85000000 0x1A00000>;
> +               };
> +
> +               npu_phyaddr@86B00000 {
> +                       no-map;
> +                       reg = <0x86B00000 0x100000>;
> +               };
> +
> +               npu_rxdesc@86D00000 {
> +                       no-map;
> +                       reg = <0x86D00000 0x100000>;
> +               };
> +       };
> +
> +       psci {
> +               compatible = "arm,psci-0.2";
> +               method = "smc";
> +       };
> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               cpu-map {
> +                       cluster0 {
> +                               core0 {
> +                                       cpu = <&cpu0>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu1>;
> +                               };
> +                       };
> +               };
> +
> +               cpu0: cpu@0 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x0>;
> +                       enable-method = "psci";
> +                       clock-frequency = <80000000>;
> +                       next-level-cache = <&L2_0>;
> +               };
> +
> +               cpu1: cpu@1 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x1>;
> +                       enable-method = "psci";
> +                       clock-frequency = <80000000>;
> +                       next-level-cache = <&L2_0>;
> +               };
> +
> +               L2_0: l2-cache0 {
> +                       compatible = "cache";
> +               };
> +       };
> +
> +       gic: interrupt-controller@9000000 {
> +               compatible = "arm,gic-v3";
> +               interrupt-controller;
> +               #interrupt-cells = <3>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               reg = <0x09000000 0x20000>,
> +                     <0x09080000 0x80000>,
> +                     <0x09400000 0x2000>,
> +                     <0x09500000 0x2000>,
> +                     <0x09600000 0x20000>;
> +               interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +       };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +       };
> +
> +       uart1: serial@1fbf0000 {
> +               compatible = "ns16550";
> +               reg = <0x1fbf0000 0x30>;
> +               reg-io-width = <4>;
> +               reg-shift = <2>;
> +               interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +               clock-frequency = <1843200>;
> +               status = "okay";
> +       };
> +};
> diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
> new file mode 100644
> index 000000000000..a5857d0d02eb
> --- /dev/null
> +++ b/arch/arm/mach-airoha/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +obj-y                  += airoha.o
> diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
> new file mode 100644
> index 000000000000..ea23b5abb478
> --- /dev/null
> +++ b/arch/arm/mach-airoha/airoha.c
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Device Tree support for Airoha SoCs
> + *
> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
> + */
> +#include <asm/mach/arch.h>
> +
> +static const char * const airoha_board_dt_compat[] = {
> +       "airoha,en7523",
> +       NULL,
> +};
> +
> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")

Since this is Cortex-A53 core is there a reason why this is not placed
within arm64 directory?

Thanks,

Luka

> +       .dt_compat      = airoha_board_dt_compat,
> +MACHINE_END
> --
> 2.32.0 (Apple Git-132)
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 10:51     ` Luka Perkov
  0 siblings, 0 replies; 69+ messages in thread
From: Luka Perkov @ 2022-01-31 10:51 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring,
	linux-mediatek, Linux ARM, John Crispin, linux-kernel,
	devicetree, Robert Marko

Hello Felix,

On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> EN7523 is an armv8 based silicon used inside broadband access type devices
> such as xPON and xDSL. It shares various silicon blocks with MediaTek
> silicon such as the MT7622.
>
> Add basic support for Airoha EN7523, enough for booting to console.
>
> The UART is basically 8250-compatible, except for the clock selection.
> A clock-frequency value is synthesized to get this to run at 115200 bps.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  arch/arm/Kconfig                 |  12 ++++
>  arch/arm/Makefile                |   1 +
>  arch/arm/boot/dts/Makefile       |   2 +
>  arch/arm/boot/dts/en7523-evb.dts |  27 +++++++
>  arch/arm/boot/dts/en7523.dtsi    | 117 +++++++++++++++++++++++++++++++
>  arch/arm/mach-airoha/Makefile    |   2 +
>  arch/arm/mach-airoha/airoha.c    |  16 +++++
>  7 files changed, 177 insertions(+)
>  create mode 100644 arch/arm/boot/dts/en7523-evb.dts
>  create mode 100644 arch/arm/boot/dts/en7523.dtsi
>  create mode 100644 arch/arm/mach-airoha/Makefile
>  create mode 100644 arch/arm/mach-airoha/airoha.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 796fc8017f5d..57ef390d3146 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -572,6 +572,18 @@ config ARCH_VIRT
>         select HAVE_ARM_ARCH_TIMER
>         select ARCH_SUPPORTS_BIG_ENDIAN
>
> +config ARCH_AIROHA
> +       bool "Airoha SoC Support"
> +       depends on ARCH_MULTI_V7
> +       select ARM_AMBA
> +       select ARM_GIC
> +       select ARM_GIC_V3
> +       select ARM_PSCI
> +       select HAVE_ARM_ARCH_TIMER
> +       select COMMON_CLK
> +       help
> +         Support for Airoha EN7523 SoCs
> +
>  #
>  # This is sorted alphabetically by mach-* pathname.  However, plat-*
>  # Kconfigs may be included either alphabetically (according to the
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 77172d555c7e..34baf885573a 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
>  # Machine directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
>  machine-$(CONFIG_ARCH_ACTIONS)         += actions
> +machine-$(CONFIG_ARCH_AIROHA)          += airoha
>  machine-$(CONFIG_ARCH_ALPINE)          += alpine
>  machine-$(CONFIG_ARCH_ARTPEC)          += artpec
>  machine-$(CONFIG_ARCH_ASPEED)           += aspeed
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e41eca79c950..5c2dd47b58b0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -187,6 +187,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
>         da850-lego-ev3.dtb
>  dtb-$(CONFIG_ARCH_DIGICOLOR) += \
>         cx92755_equinox.dtb
> +dtb-$(CONFIG_ARCH_AIROHA) += \
> +       en7523-evb.dtb
>  dtb-$(CONFIG_ARCH_EXYNOS3) += \
>         exynos3250-artik5-eval.dtb \
>         exynos3250-monk.dtb \
> diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
> new file mode 100644
> index 000000000000..69754ef9a628
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523-evb.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/dts-v1/;
> +
> +/* Bootloader installs ATF here */
> +/memreserve/ 0x80000000 0x200000;
> +
> +#include "en7523.dtsi"
> +
> +/ {
> +       model = "Airoha EN7523 Evaluation Board";
> +       compatible = "airoha,en7523-evb", "airoha,en7523";
> +
> +       aliases {
> +               serial0 = &uart1;
> +       };
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200 earlycon";
> +               stdout-path = "serial0:115200n8";
> +               linux,usable-memory-range = <0x80200000 0x1fe00000>;
> +       };
> +
> +       memory@80000000 {
> +               device_type = "memory";
> +               reg = <0x80000000 0x20000000>;
> +       };
> +};
> diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
> new file mode 100644
> index 000000000000..f1d4c03aad89
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523.dtsi
> @@ -0,0 +1,117 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +       interrupt-parent = <&gic>;
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +
> +       reserved-memory {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               npu_binary@84000000 {
> +                       no-map;
> +                       reg = <0x84000000 0xA00000>;
> +               };
> +
> +               npu_flag@84B0000 {
> +                       no-map;
> +                       reg = <0x84B00000 0x100000>;
> +               };
> +
> +               npu_pkt@85000000 {
> +                       no-map;
> +                       reg = <0x85000000 0x1A00000>;
> +               };
> +
> +               npu_phyaddr@86B00000 {
> +                       no-map;
> +                       reg = <0x86B00000 0x100000>;
> +               };
> +
> +               npu_rxdesc@86D00000 {
> +                       no-map;
> +                       reg = <0x86D00000 0x100000>;
> +               };
> +       };
> +
> +       psci {
> +               compatible = "arm,psci-0.2";
> +               method = "smc";
> +       };
> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               cpu-map {
> +                       cluster0 {
> +                               core0 {
> +                                       cpu = <&cpu0>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu1>;
> +                               };
> +                       };
> +               };
> +
> +               cpu0: cpu@0 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x0>;
> +                       enable-method = "psci";
> +                       clock-frequency = <80000000>;
> +                       next-level-cache = <&L2_0>;
> +               };
> +
> +               cpu1: cpu@1 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x1>;
> +                       enable-method = "psci";
> +                       clock-frequency = <80000000>;
> +                       next-level-cache = <&L2_0>;
> +               };
> +
> +               L2_0: l2-cache0 {
> +                       compatible = "cache";
> +               };
> +       };
> +
> +       gic: interrupt-controller@9000000 {
> +               compatible = "arm,gic-v3";
> +               interrupt-controller;
> +               #interrupt-cells = <3>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               reg = <0x09000000 0x20000>,
> +                     <0x09080000 0x80000>,
> +                     <0x09400000 0x2000>,
> +                     <0x09500000 0x2000>,
> +                     <0x09600000 0x20000>;
> +               interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +       };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +       };
> +
> +       uart1: serial@1fbf0000 {
> +               compatible = "ns16550";
> +               reg = <0x1fbf0000 0x30>;
> +               reg-io-width = <4>;
> +               reg-shift = <2>;
> +               interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +               clock-frequency = <1843200>;
> +               status = "okay";
> +       };
> +};
> diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
> new file mode 100644
> index 000000000000..a5857d0d02eb
> --- /dev/null
> +++ b/arch/arm/mach-airoha/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +obj-y                  += airoha.o
> diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
> new file mode 100644
> index 000000000000..ea23b5abb478
> --- /dev/null
> +++ b/arch/arm/mach-airoha/airoha.c
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Device Tree support for Airoha SoCs
> + *
> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
> + */
> +#include <asm/mach/arch.h>
> +
> +static const char * const airoha_board_dt_compat[] = {
> +       "airoha,en7523",
> +       NULL,
> +};
> +
> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")

Since this is Cortex-A53 core is there a reason why this is not placed
within arm64 directory?

Thanks,

Luka

> +       .dt_compat      = airoha_board_dt_compat,
> +MACHINE_END
> --
> 2.32.0 (Apple Git-132)
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 10:51     ` Luka Perkov
  0 siblings, 0 replies; 69+ messages in thread
From: Luka Perkov @ 2022-01-31 10:51 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring,
	linux-mediatek, Linux ARM, John Crispin, linux-kernel,
	devicetree, Robert Marko

Hello Felix,

On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> EN7523 is an armv8 based silicon used inside broadband access type devices
> such as xPON and xDSL. It shares various silicon blocks with MediaTek
> silicon such as the MT7622.
>
> Add basic support for Airoha EN7523, enough for booting to console.
>
> The UART is basically 8250-compatible, except for the clock selection.
> A clock-frequency value is synthesized to get this to run at 115200 bps.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  arch/arm/Kconfig                 |  12 ++++
>  arch/arm/Makefile                |   1 +
>  arch/arm/boot/dts/Makefile       |   2 +
>  arch/arm/boot/dts/en7523-evb.dts |  27 +++++++
>  arch/arm/boot/dts/en7523.dtsi    | 117 +++++++++++++++++++++++++++++++
>  arch/arm/mach-airoha/Makefile    |   2 +
>  arch/arm/mach-airoha/airoha.c    |  16 +++++
>  7 files changed, 177 insertions(+)
>  create mode 100644 arch/arm/boot/dts/en7523-evb.dts
>  create mode 100644 arch/arm/boot/dts/en7523.dtsi
>  create mode 100644 arch/arm/mach-airoha/Makefile
>  create mode 100644 arch/arm/mach-airoha/airoha.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 796fc8017f5d..57ef390d3146 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -572,6 +572,18 @@ config ARCH_VIRT
>         select HAVE_ARM_ARCH_TIMER
>         select ARCH_SUPPORTS_BIG_ENDIAN
>
> +config ARCH_AIROHA
> +       bool "Airoha SoC Support"
> +       depends on ARCH_MULTI_V7
> +       select ARM_AMBA
> +       select ARM_GIC
> +       select ARM_GIC_V3
> +       select ARM_PSCI
> +       select HAVE_ARM_ARCH_TIMER
> +       select COMMON_CLK
> +       help
> +         Support for Airoha EN7523 SoCs
> +
>  #
>  # This is sorted alphabetically by mach-* pathname.  However, plat-*
>  # Kconfigs may be included either alphabetically (according to the
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 77172d555c7e..34baf885573a 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
>  # Machine directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
>  machine-$(CONFIG_ARCH_ACTIONS)         += actions
> +machine-$(CONFIG_ARCH_AIROHA)          += airoha
>  machine-$(CONFIG_ARCH_ALPINE)          += alpine
>  machine-$(CONFIG_ARCH_ARTPEC)          += artpec
>  machine-$(CONFIG_ARCH_ASPEED)           += aspeed
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e41eca79c950..5c2dd47b58b0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -187,6 +187,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
>         da850-lego-ev3.dtb
>  dtb-$(CONFIG_ARCH_DIGICOLOR) += \
>         cx92755_equinox.dtb
> +dtb-$(CONFIG_ARCH_AIROHA) += \
> +       en7523-evb.dtb
>  dtb-$(CONFIG_ARCH_EXYNOS3) += \
>         exynos3250-artik5-eval.dtb \
>         exynos3250-monk.dtb \
> diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
> new file mode 100644
> index 000000000000..69754ef9a628
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523-evb.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/dts-v1/;
> +
> +/* Bootloader installs ATF here */
> +/memreserve/ 0x80000000 0x200000;
> +
> +#include "en7523.dtsi"
> +
> +/ {
> +       model = "Airoha EN7523 Evaluation Board";
> +       compatible = "airoha,en7523-evb", "airoha,en7523";
> +
> +       aliases {
> +               serial0 = &uart1;
> +       };
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200 earlycon";
> +               stdout-path = "serial0:115200n8";
> +               linux,usable-memory-range = <0x80200000 0x1fe00000>;
> +       };
> +
> +       memory@80000000 {
> +               device_type = "memory";
> +               reg = <0x80000000 0x20000000>;
> +       };
> +};
> diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
> new file mode 100644
> index 000000000000..f1d4c03aad89
> --- /dev/null
> +++ b/arch/arm/boot/dts/en7523.dtsi
> @@ -0,0 +1,117 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +       interrupt-parent = <&gic>;
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +
> +       reserved-memory {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               npu_binary@84000000 {
> +                       no-map;
> +                       reg = <0x84000000 0xA00000>;
> +               };
> +
> +               npu_flag@84B0000 {
> +                       no-map;
> +                       reg = <0x84B00000 0x100000>;
> +               };
> +
> +               npu_pkt@85000000 {
> +                       no-map;
> +                       reg = <0x85000000 0x1A00000>;
> +               };
> +
> +               npu_phyaddr@86B00000 {
> +                       no-map;
> +                       reg = <0x86B00000 0x100000>;
> +               };
> +
> +               npu_rxdesc@86D00000 {
> +                       no-map;
> +                       reg = <0x86D00000 0x100000>;
> +               };
> +       };
> +
> +       psci {
> +               compatible = "arm,psci-0.2";
> +               method = "smc";
> +       };
> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               cpu-map {
> +                       cluster0 {
> +                               core0 {
> +                                       cpu = <&cpu0>;
> +                               };
> +                               core1 {
> +                                       cpu = <&cpu1>;
> +                               };
> +                       };
> +               };
> +
> +               cpu0: cpu@0 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x0>;
> +                       enable-method = "psci";
> +                       clock-frequency = <80000000>;
> +                       next-level-cache = <&L2_0>;
> +               };
> +
> +               cpu1: cpu@1 {
> +                       device_type = "cpu";
> +                       compatible = "arm,cortex-a53";
> +                       reg = <0x1>;
> +                       enable-method = "psci";
> +                       clock-frequency = <80000000>;
> +                       next-level-cache = <&L2_0>;
> +               };
> +
> +               L2_0: l2-cache0 {
> +                       compatible = "cache";
> +               };
> +       };
> +
> +       gic: interrupt-controller@9000000 {
> +               compatible = "arm,gic-v3";
> +               interrupt-controller;
> +               #interrupt-cells = <3>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               reg = <0x09000000 0x20000>,
> +                     <0x09080000 0x80000>,
> +                     <0x09400000 0x2000>,
> +                     <0x09500000 0x2000>,
> +                     <0x09600000 0x20000>;
> +               interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +       };
> +
> +       timer {
> +               compatible = "arm,armv8-timer";
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +                            <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +       };
> +
> +       uart1: serial@1fbf0000 {
> +               compatible = "ns16550";
> +               reg = <0x1fbf0000 0x30>;
> +               reg-io-width = <4>;
> +               reg-shift = <2>;
> +               interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +               clock-frequency = <1843200>;
> +               status = "okay";
> +       };
> +};
> diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
> new file mode 100644
> index 000000000000..a5857d0d02eb
> --- /dev/null
> +++ b/arch/arm/mach-airoha/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +obj-y                  += airoha.o
> diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
> new file mode 100644
> index 000000000000..ea23b5abb478
> --- /dev/null
> +++ b/arch/arm/mach-airoha/airoha.c
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Device Tree support for Airoha SoCs
> + *
> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
> + */
> +#include <asm/mach/arch.h>
> +
> +static const char * const airoha_board_dt_compat[] = {
> +       "airoha,en7523",
> +       NULL,
> +};
> +
> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")

Since this is Cortex-A53 core is there a reason why this is not placed
within arm64 directory?

Thanks,

Luka

> +       .dt_compat      = airoha_board_dt_compat,
> +MACHINE_END
> --
> 2.32.0 (Apple Git-132)
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
  2022-01-30 14:51   ` Felix Fietkau
  (?)
@ 2022-01-31 11:13     ` Linus Walleij
  -1 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2022-01-31 11:13 UTC (permalink / raw)
  To: Felix Fietkau, Bartosz Golaszewski
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Andy Shevchenko,
	linux-kernel, linux-gpio

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:

> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs. Each instance in DT is for a single bank.
>
> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>

This one and patch 11 with the bindings does not seem to have any
build dependencies on the rest of the patches at all.

What about Bartosz just apply these two to the GPIO tree so we
have less stuff to iterate?

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
@ 2022-01-31 11:13     ` Linus Walleij
  0 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2022-01-31 11:13 UTC (permalink / raw)
  To: Felix Fietkau, Bartosz Golaszewski
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Andy Shevchenko,
	linux-kernel, linux-gpio

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:

> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs. Each instance in DT is for a single bank.
>
> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>

This one and patch 11 with the bindings does not seem to have any
build dependencies on the rest of the patches at all.

What about Bartosz just apply these two to the GPIO tree so we
have less stuff to iterate?

Yours,
Linus Walleij

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
@ 2022-01-31 11:13     ` Linus Walleij
  0 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2022-01-31 11:13 UTC (permalink / raw)
  To: Felix Fietkau, Bartosz Golaszewski
  Cc: soc, linux-mediatek, linux-arm-kernel, john, Andy Shevchenko,
	linux-kernel, linux-gpio

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:

> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs. Each instance in DT is for a single bank.
>
> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>

This one and patch 11 with the bindings does not seem to have any
build dependencies on the rest of the patches at all.

What about Bartosz just apply these two to the GPIO tree so we
have less stuff to iterate?

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
  2022-01-31 10:51     ` Luka Perkov
  (?)
@ 2022-01-31 12:57       ` Felix Fietkau
  -1 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-31 12:57 UTC (permalink / raw)
  To: Luka Perkov
  Cc: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring,
	linux-mediatek, Linux ARM, John Crispin, linux-kernel,
	devicetree, Robert Marko


On 31.01.22 11:51, Luka Perkov wrote:
> Hello Felix,
> 
> On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>>
>> From: John Crispin <john@phrozen.org>
>>
>> EN7523 is an armv8 based silicon used inside broadband access type devices
>> such as xPON and xDSL. It shares various silicon blocks with MediaTek
>> silicon such as the MT7622.
>>
>> Add basic support for Airoha EN7523, enough for booting to console.
>>
>> The UART is basically 8250-compatible, except for the clock selection.
>> A clock-frequency value is synthesized to get this to run at 115200 bps.
>>
>> Signed-off-by: John Crispin <john@phrozen.org>
>> Signed-off-by: Bert Vermeulen <bert@biot.com>
>> Signed-off-by: Felix Fietkau <nbd@nbd.name>
>> ---
>> index 000000000000..ea23b5abb478
>> --- /dev/null
>> +++ b/arch/arm/mach-airoha/airoha.c
>> @@ -0,0 +1,16 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Device Tree support for Airoha SoCs
>> + *
>> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
>> + */
>> +#include <asm/mach/arch.h>
>> +
>> +static const char * const airoha_board_dt_compat[] = {
>> +       "airoha,en7523",
>> +       NULL,
>> +};
>> +
>> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
> 
> Since this is Cortex-A53 core is there a reason why this is not placed
> within arm64 directory?
 From what I can tell, it's a stripped-down core that only runs in 
32-bit mode.

- Felix

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 12:57       ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-31 12:57 UTC (permalink / raw)
  To: Luka Perkov
  Cc: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring,
	linux-mediatek, Linux ARM, John Crispin, linux-kernel,
	devicetree, Robert Marko


On 31.01.22 11:51, Luka Perkov wrote:
> Hello Felix,
> 
> On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>>
>> From: John Crispin <john@phrozen.org>
>>
>> EN7523 is an armv8 based silicon used inside broadband access type devices
>> such as xPON and xDSL. It shares various silicon blocks with MediaTek
>> silicon such as the MT7622.
>>
>> Add basic support for Airoha EN7523, enough for booting to console.
>>
>> The UART is basically 8250-compatible, except for the clock selection.
>> A clock-frequency value is synthesized to get this to run at 115200 bps.
>>
>> Signed-off-by: John Crispin <john@phrozen.org>
>> Signed-off-by: Bert Vermeulen <bert@biot.com>
>> Signed-off-by: Felix Fietkau <nbd@nbd.name>
>> ---
>> index 000000000000..ea23b5abb478
>> --- /dev/null
>> +++ b/arch/arm/mach-airoha/airoha.c
>> @@ -0,0 +1,16 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Device Tree support for Airoha SoCs
>> + *
>> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
>> + */
>> +#include <asm/mach/arch.h>
>> +
>> +static const char * const airoha_board_dt_compat[] = {
>> +       "airoha,en7523",
>> +       NULL,
>> +};
>> +
>> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
> 
> Since this is Cortex-A53 core is there a reason why this is not placed
> within arm64 directory?
 From what I can tell, it's a stripped-down core that only runs in 
32-bit mode.

- Felix

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 12:57       ` Felix Fietkau
  0 siblings, 0 replies; 69+ messages in thread
From: Felix Fietkau @ 2022-01-31 12:57 UTC (permalink / raw)
  To: Luka Perkov
  Cc: Russell King, Arnd Bergmann, Olof Johansson, soc, Rob Herring,
	linux-mediatek, Linux ARM, John Crispin, linux-kernel,
	devicetree, Robert Marko


On 31.01.22 11:51, Luka Perkov wrote:
> Hello Felix,
> 
> On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>>
>> From: John Crispin <john@phrozen.org>
>>
>> EN7523 is an armv8 based silicon used inside broadband access type devices
>> such as xPON and xDSL. It shares various silicon blocks with MediaTek
>> silicon such as the MT7622.
>>
>> Add basic support for Airoha EN7523, enough for booting to console.
>>
>> The UART is basically 8250-compatible, except for the clock selection.
>> A clock-frequency value is synthesized to get this to run at 115200 bps.
>>
>> Signed-off-by: John Crispin <john@phrozen.org>
>> Signed-off-by: Bert Vermeulen <bert@biot.com>
>> Signed-off-by: Felix Fietkau <nbd@nbd.name>
>> ---
>> index 000000000000..ea23b5abb478
>> --- /dev/null
>> +++ b/arch/arm/mach-airoha/airoha.c
>> @@ -0,0 +1,16 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Device Tree support for Airoha SoCs
>> + *
>> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
>> + */
>> +#include <asm/mach/arch.h>
>> +
>> +static const char * const airoha_board_dt_compat[] = {
>> +       "airoha,en7523",
>> +       NULL,
>> +};
>> +
>> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
> 
> Since this is Cortex-A53 core is there a reason why this is not placed
> within arm64 directory?
 From what I can tell, it's a stripped-down core that only runs in 
32-bit mode.

- Felix

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
  2022-01-31 12:57       ` Felix Fietkau
  (?)
@ 2022-01-31 13:00         ` Robert Marko
  -1 siblings, 0 replies; 69+ messages in thread
From: Robert Marko @ 2022-01-31 13:00 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Luka Perkov, Russell King, Arnd Bergmann, Olof Johansson, soc,
	Rob Herring, linux-mediatek, Linux ARM, John Crispin,
	Linux Kernel Mailing List, devicetree

On Mon, Jan 31, 2022 at 1:57 PM Felix Fietkau <nbd@nbd.name> wrote:
>
>
> On 31.01.22 11:51, Luka Perkov wrote:
> > Hello Felix,
> >
> > On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
> >>
> >> From: John Crispin <john@phrozen.org>
> >>
> >> EN7523 is an armv8 based silicon used inside broadband access type devices
> >> such as xPON and xDSL. It shares various silicon blocks with MediaTek
> >> silicon such as the MT7622.
> >>
> >> Add basic support for Airoha EN7523, enough for booting to console.
> >>
> >> The UART is basically 8250-compatible, except for the clock selection.
> >> A clock-frequency value is synthesized to get this to run at 115200 bps.
> >>
> >> Signed-off-by: John Crispin <john@phrozen.org>
> >> Signed-off-by: Bert Vermeulen <bert@biot.com>
> >> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> >> ---
> >> index 000000000000..ea23b5abb478
> >> --- /dev/null
> >> +++ b/arch/arm/mach-airoha/airoha.c
> >> @@ -0,0 +1,16 @@
> >> +// SPDX-License-Identifier: GPL-2.0-or-later
> >> +/*
> >> + * Device Tree support for Airoha SoCs
> >> + *
> >> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
> >> + */
> >> +#include <asm/mach/arch.h>
> >> +
> >> +static const char * const airoha_board_dt_compat[] = {
> >> +       "airoha,en7523",
> >> +       NULL,
> >> +};
> >> +
> >> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
> >
> > Since this is Cortex-A53 core is there a reason why this is not placed
> > within arm64 directory?
>  From what I can tell, it's a stripped-down core that only runs in
> 32-bit mode.

Hmm, this is new for me that you could do that to an ARMv8 (A53) core.
I know that you can run ARMv7 code but not that you can reduce it to
32 bit only.

Regards,
Robert
>
> - Felix



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 13:00         ` Robert Marko
  0 siblings, 0 replies; 69+ messages in thread
From: Robert Marko @ 2022-01-31 13:00 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Luka Perkov, Russell King, Arnd Bergmann, Olof Johansson, soc,
	Rob Herring, linux-mediatek, Linux ARM, John Crispin,
	Linux Kernel Mailing List, devicetree

On Mon, Jan 31, 2022 at 1:57 PM Felix Fietkau <nbd@nbd.name> wrote:
>
>
> On 31.01.22 11:51, Luka Perkov wrote:
> > Hello Felix,
> >
> > On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
> >>
> >> From: John Crispin <john@phrozen.org>
> >>
> >> EN7523 is an armv8 based silicon used inside broadband access type devices
> >> such as xPON and xDSL. It shares various silicon blocks with MediaTek
> >> silicon such as the MT7622.
> >>
> >> Add basic support for Airoha EN7523, enough for booting to console.
> >>
> >> The UART is basically 8250-compatible, except for the clock selection.
> >> A clock-frequency value is synthesized to get this to run at 115200 bps.
> >>
> >> Signed-off-by: John Crispin <john@phrozen.org>
> >> Signed-off-by: Bert Vermeulen <bert@biot.com>
> >> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> >> ---
> >> index 000000000000..ea23b5abb478
> >> --- /dev/null
> >> +++ b/arch/arm/mach-airoha/airoha.c
> >> @@ -0,0 +1,16 @@
> >> +// SPDX-License-Identifier: GPL-2.0-or-later
> >> +/*
> >> + * Device Tree support for Airoha SoCs
> >> + *
> >> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
> >> + */
> >> +#include <asm/mach/arch.h>
> >> +
> >> +static const char * const airoha_board_dt_compat[] = {
> >> +       "airoha,en7523",
> >> +       NULL,
> >> +};
> >> +
> >> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
> >
> > Since this is Cortex-A53 core is there a reason why this is not placed
> > within arm64 directory?
>  From what I can tell, it's a stripped-down core that only runs in
> 32-bit mode.

Hmm, this is new for me that you could do that to an ARMv8 (A53) core.
I know that you can run ARMv7 code but not that you can reduce it to
32 bit only.

Regards,
Robert
>
> - Felix



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 13:00         ` Robert Marko
  0 siblings, 0 replies; 69+ messages in thread
From: Robert Marko @ 2022-01-31 13:00 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Luka Perkov, Russell King, Arnd Bergmann, Olof Johansson, soc,
	Rob Herring, linux-mediatek, Linux ARM, John Crispin,
	Linux Kernel Mailing List, devicetree

On Mon, Jan 31, 2022 at 1:57 PM Felix Fietkau <nbd@nbd.name> wrote:
>
>
> On 31.01.22 11:51, Luka Perkov wrote:
> > Hello Felix,
> >
> > On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
> >>
> >> From: John Crispin <john@phrozen.org>
> >>
> >> EN7523 is an armv8 based silicon used inside broadband access type devices
> >> such as xPON and xDSL. It shares various silicon blocks with MediaTek
> >> silicon such as the MT7622.
> >>
> >> Add basic support for Airoha EN7523, enough for booting to console.
> >>
> >> The UART is basically 8250-compatible, except for the clock selection.
> >> A clock-frequency value is synthesized to get this to run at 115200 bps.
> >>
> >> Signed-off-by: John Crispin <john@phrozen.org>
> >> Signed-off-by: Bert Vermeulen <bert@biot.com>
> >> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> >> ---
> >> index 000000000000..ea23b5abb478
> >> --- /dev/null
> >> +++ b/arch/arm/mach-airoha/airoha.c
> >> @@ -0,0 +1,16 @@
> >> +// SPDX-License-Identifier: GPL-2.0-or-later
> >> +/*
> >> + * Device Tree support for Airoha SoCs
> >> + *
> >> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
> >> + */
> >> +#include <asm/mach/arch.h>
> >> +
> >> +static const char * const airoha_board_dt_compat[] = {
> >> +       "airoha,en7523",
> >> +       NULL,
> >> +};
> >> +
> >> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
> >
> > Since this is Cortex-A53 core is there a reason why this is not placed
> > within arm64 directory?
>  From what I can tell, it's a stripped-down core that only runs in
> 32-bit mode.

Hmm, this is new for me that you could do that to an ARMv8 (A53) core.
I know that you can run ARMv7 code but not that you can reduce it to
32 bit only.

Regards,
Robert
>
> - Felix



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
  2022-01-31 13:00         ` Robert Marko
  (?)
@ 2022-01-31 13:12           ` John Crispin
  -1 siblings, 0 replies; 69+ messages in thread
From: John Crispin @ 2022-01-31 13:12 UTC (permalink / raw)
  To: Robert Marko, Felix Fietkau
  Cc: Luka Perkov, Russell King, Arnd Bergmann, Olof Johansson, soc,
	Rob Herring, linux-mediatek, Linux ARM,
	Linux Kernel Mailing List, devicetree



On 31.01.22 14:00, Robert Marko wrote:
> On Mon, Jan 31, 2022 at 1:57 PM Felix Fietkau <nbd@nbd.name> wrote:
>>
>>
>> On 31.01.22 11:51, Luka Perkov wrote:
>>> Hello Felix,
>>>
>>> On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>>>>
>>>> From: John Crispin <john@phrozen.org>
>>>>
>>>> EN7523 is an armv8 based silicon used inside broadband access type devices
>>>> such as xPON and xDSL. It shares various silicon blocks with MediaTek
>>>> silicon such as the MT7622.
>>>>
>>>> Add basic support for Airoha EN7523, enough for booting to console.
>>>>
>>>> The UART is basically 8250-compatible, except for the clock selection.
>>>> A clock-frequency value is synthesized to get this to run at 115200 bps.
>>>>
>>>> Signed-off-by: John Crispin <john@phrozen.org>
>>>> Signed-off-by: Bert Vermeulen <bert@biot.com>
>>>> Signed-off-by: Felix Fietkau <nbd@nbd.name>
>>>> ---
>>>> index 000000000000..ea23b5abb478
>>>> --- /dev/null
>>>> +++ b/arch/arm/mach-airoha/airoha.c
>>>> @@ -0,0 +1,16 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>> +/*
>>>> + * Device Tree support for Airoha SoCs
>>>> + *
>>>> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
>>>> + */
>>>> +#include <asm/mach/arch.h>
>>>> +
>>>> +static const char * const airoha_board_dt_compat[] = {
>>>> +       "airoha,en7523",
>>>> +       NULL,
>>>> +};
>>>> +
>>>> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
>>>
>>> Since this is Cortex-A53 core is there a reason why this is not placed
>>> within arm64 directory?
>>   From what I can tell, it's a stripped-down core that only runs in
>> 32-bit mode.
> 
> Hmm, this is new for me that you could do that to an ARMv8 (A53) core.
> I know that you can run ARMv7 code but not that you can reduce it to
> 32 bit only.
> 
> Regards,
> Robert

the bootrom and vendor bootloader do not support 64bit more.
	John

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 13:12           ` John Crispin
  0 siblings, 0 replies; 69+ messages in thread
From: John Crispin @ 2022-01-31 13:12 UTC (permalink / raw)
  To: Robert Marko, Felix Fietkau
  Cc: Luka Perkov, Russell King, Arnd Bergmann, Olof Johansson, soc,
	Rob Herring, linux-mediatek, Linux ARM,
	Linux Kernel Mailing List, devicetree



On 31.01.22 14:00, Robert Marko wrote:
> On Mon, Jan 31, 2022 at 1:57 PM Felix Fietkau <nbd@nbd.name> wrote:
>>
>>
>> On 31.01.22 11:51, Luka Perkov wrote:
>>> Hello Felix,
>>>
>>> On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>>>>
>>>> From: John Crispin <john@phrozen.org>
>>>>
>>>> EN7523 is an armv8 based silicon used inside broadband access type devices
>>>> such as xPON and xDSL. It shares various silicon blocks with MediaTek
>>>> silicon such as the MT7622.
>>>>
>>>> Add basic support for Airoha EN7523, enough for booting to console.
>>>>
>>>> The UART is basically 8250-compatible, except for the clock selection.
>>>> A clock-frequency value is synthesized to get this to run at 115200 bps.
>>>>
>>>> Signed-off-by: John Crispin <john@phrozen.org>
>>>> Signed-off-by: Bert Vermeulen <bert@biot.com>
>>>> Signed-off-by: Felix Fietkau <nbd@nbd.name>
>>>> ---
>>>> index 000000000000..ea23b5abb478
>>>> --- /dev/null
>>>> +++ b/arch/arm/mach-airoha/airoha.c
>>>> @@ -0,0 +1,16 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>> +/*
>>>> + * Device Tree support for Airoha SoCs
>>>> + *
>>>> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
>>>> + */
>>>> +#include <asm/mach/arch.h>
>>>> +
>>>> +static const char * const airoha_board_dt_compat[] = {
>>>> +       "airoha,en7523",
>>>> +       NULL,
>>>> +};
>>>> +
>>>> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
>>>
>>> Since this is Cortex-A53 core is there a reason why this is not placed
>>> within arm64 directory?
>>   From what I can tell, it's a stripped-down core that only runs in
>> 32-bit mode.
> 
> Hmm, this is new for me that you could do that to an ARMv8 (A53) core.
> I know that you can run ARMv7 code but not that you can reduce it to
> 32 bit only.
> 
> Regards,
> Robert

the bootrom and vendor bootloader do not support 64bit more.
	John

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC
@ 2022-01-31 13:12           ` John Crispin
  0 siblings, 0 replies; 69+ messages in thread
From: John Crispin @ 2022-01-31 13:12 UTC (permalink / raw)
  To: Robert Marko, Felix Fietkau
  Cc: Luka Perkov, Russell King, Arnd Bergmann, Olof Johansson, soc,
	Rob Herring, linux-mediatek, Linux ARM,
	Linux Kernel Mailing List, devicetree



On 31.01.22 14:00, Robert Marko wrote:
> On Mon, Jan 31, 2022 at 1:57 PM Felix Fietkau <nbd@nbd.name> wrote:
>>
>>
>> On 31.01.22 11:51, Luka Perkov wrote:
>>> Hello Felix,
>>>
>>> On Sun, Jan 30, 2022 at 3:56 PM Felix Fietkau <nbd@nbd.name> wrote:
>>>>
>>>> From: John Crispin <john@phrozen.org>
>>>>
>>>> EN7523 is an armv8 based silicon used inside broadband access type devices
>>>> such as xPON and xDSL. It shares various silicon blocks with MediaTek
>>>> silicon such as the MT7622.
>>>>
>>>> Add basic support for Airoha EN7523, enough for booting to console.
>>>>
>>>> The UART is basically 8250-compatible, except for the clock selection.
>>>> A clock-frequency value is synthesized to get this to run at 115200 bps.
>>>>
>>>> Signed-off-by: John Crispin <john@phrozen.org>
>>>> Signed-off-by: Bert Vermeulen <bert@biot.com>
>>>> Signed-off-by: Felix Fietkau <nbd@nbd.name>
>>>> ---
>>>> index 000000000000..ea23b5abb478
>>>> --- /dev/null
>>>> +++ b/arch/arm/mach-airoha/airoha.c
>>>> @@ -0,0 +1,16 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>>> +/*
>>>> + * Device Tree support for Airoha SoCs
>>>> + *
>>>> + * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
>>>> + */
>>>> +#include <asm/mach/arch.h>
>>>> +
>>>> +static const char * const airoha_board_dt_compat[] = {
>>>> +       "airoha,en7523",
>>>> +       NULL,
>>>> +};
>>>> +
>>>> +DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
>>>
>>> Since this is Cortex-A53 core is there a reason why this is not placed
>>> within arm64 directory?
>>   From what I can tell, it's a stripped-down core that only runs in
>> 32-bit mode.
> 
> Hmm, this is new for me that you could do that to an ARMv8 (A53) core.
> I know that you can run ARMv7 code but not that you can reduce it to
> 32 bit only.
> 
> Regards,
> Robert

the bootrom and vendor bootloader do not support 64bit more.
	John

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 11/13] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
  2022-01-30 14:51   ` Felix Fietkau
  (?)
@ 2022-02-02  9:16     ` Bartosz Golaszewski
  -1 siblings, 0 replies; 69+ messages in thread
From: Bartosz Golaszewski @ 2022-02-02  9:16 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Linus Walleij, Rob Herring, John Crispin, soc,
	moderated list:ARM/Mediatek SoC...,
	Linux ARM, Rob Herring, open list:GPIO SUBSYSTEM, devicetree,
	Linux Kernel Mailing List

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  .../bindings/gpio/airoha,en7523-gpio.yaml     | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
> new file mode 100644
> index 000000000000..66c00ec85731
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha EN7523 GPIO controller
> +
> +maintainers:
> +  - John Crispin <john@phrozen.org>
> +
> +description: |
> +  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> +  GPIOs.
> +
> +properties:
> +  $nodename:
> +    pattern: "^gpio@[0-9a-f]+$"
> +
> +  compatible:
> +    items:
> +      - const: airoha,en7523-gpio
> +
> +  reg:
> +    description: |
> +      The first tuple points to the input register.
> +      The second and third tuple point to the direction registers
> +      The fourth tuple points to the output register
> +    maxItems: 4
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  gpio-controller: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#gpio-cells"
> +  - gpio-controller
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio0: gpio@1fbf0200 {
> +        compatible = "airoha,en7523-gpio";
> +        reg = <0x1fbf0204 0x4>,
> +              <0x1fbf0200 0x4>,
> +              <0x1fbf0220 0x4>,
> +              <0x1fbf0214 0x4>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +    };
> +
> +    gpio1: gpio@1fbf0270 {
> +        compatible = "airoha,en7523-gpio";
> +        reg = <0x1fbf0270 0x4>,
> +              <0x1fbf0260 0x4>,
> +              <0x1fbf0264 0x4>,
> +              <0x1fbf0278 0x4>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +    };
> +
> +

I removed this unnecessary newline when applying.

> +...
> --
> 2.32.0 (Apple Git-132)
>

Queued for next, thanks!

Bart

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 11/13] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
@ 2022-02-02  9:16     ` Bartosz Golaszewski
  0 siblings, 0 replies; 69+ messages in thread
From: Bartosz Golaszewski @ 2022-02-02  9:16 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Linus Walleij, Rob Herring, John Crispin, soc,
	moderated list:ARM/Mediatek SoC...,
	Linux ARM, Rob Herring, open list:GPIO SUBSYSTEM, devicetree,
	Linux Kernel Mailing List

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  .../bindings/gpio/airoha,en7523-gpio.yaml     | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
> new file mode 100644
> index 000000000000..66c00ec85731
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha EN7523 GPIO controller
> +
> +maintainers:
> +  - John Crispin <john@phrozen.org>
> +
> +description: |
> +  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> +  GPIOs.
> +
> +properties:
> +  $nodename:
> +    pattern: "^gpio@[0-9a-f]+$"
> +
> +  compatible:
> +    items:
> +      - const: airoha,en7523-gpio
> +
> +  reg:
> +    description: |
> +      The first tuple points to the input register.
> +      The second and third tuple point to the direction registers
> +      The fourth tuple points to the output register
> +    maxItems: 4
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  gpio-controller: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#gpio-cells"
> +  - gpio-controller
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio0: gpio@1fbf0200 {
> +        compatible = "airoha,en7523-gpio";
> +        reg = <0x1fbf0204 0x4>,
> +              <0x1fbf0200 0x4>,
> +              <0x1fbf0220 0x4>,
> +              <0x1fbf0214 0x4>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +    };
> +
> +    gpio1: gpio@1fbf0270 {
> +        compatible = "airoha,en7523-gpio";
> +        reg = <0x1fbf0270 0x4>,
> +              <0x1fbf0260 0x4>,
> +              <0x1fbf0264 0x4>,
> +              <0x1fbf0278 0x4>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +    };
> +
> +

I removed this unnecessary newline when applying.

> +...
> --
> 2.32.0 (Apple Git-132)
>

Queued for next, thanks!

Bart

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 11/13] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
@ 2022-02-02  9:16     ` Bartosz Golaszewski
  0 siblings, 0 replies; 69+ messages in thread
From: Bartosz Golaszewski @ 2022-02-02  9:16 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Linus Walleij, Rob Herring, John Crispin, soc,
	moderated list:ARM/Mediatek SoC...,
	Linux ARM, Rob Herring, open list:GPIO SUBSYSTEM, devicetree,
	Linux Kernel Mailing List

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  .../bindings/gpio/airoha,en7523-gpio.yaml     | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
> new file mode 100644
> index 000000000000..66c00ec85731
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha EN7523 GPIO controller
> +
> +maintainers:
> +  - John Crispin <john@phrozen.org>
> +
> +description: |
> +  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> +  GPIOs.
> +
> +properties:
> +  $nodename:
> +    pattern: "^gpio@[0-9a-f]+$"
> +
> +  compatible:
> +    items:
> +      - const: airoha,en7523-gpio
> +
> +  reg:
> +    description: |
> +      The first tuple points to the input register.
> +      The second and third tuple point to the direction registers
> +      The fourth tuple points to the output register
> +    maxItems: 4
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  gpio-controller: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#gpio-cells"
> +  - gpio-controller
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio0: gpio@1fbf0200 {
> +        compatible = "airoha,en7523-gpio";
> +        reg = <0x1fbf0204 0x4>,
> +              <0x1fbf0200 0x4>,
> +              <0x1fbf0220 0x4>,
> +              <0x1fbf0214 0x4>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +    };
> +
> +    gpio1: gpio@1fbf0270 {
> +        compatible = "airoha,en7523-gpio";
> +        reg = <0x1fbf0270 0x4>,
> +              <0x1fbf0260 0x4>,
> +              <0x1fbf0264 0x4>,
> +              <0x1fbf0278 0x4>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +    };
> +
> +

I removed this unnecessary newline when applying.

> +...
> --
> 2.32.0 (Apple Git-132)
>

Queued for next, thanks!

Bart

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
  2022-01-30 14:51   ` Felix Fietkau
  (?)
@ 2022-02-02  9:17     ` Bartosz Golaszewski
  -1 siblings, 0 replies; 69+ messages in thread
From: Bartosz Golaszewski @ 2022-02-02  9:17 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Linus Walleij, soc, moderated list:ARM/Mediatek SoC...,
	Linux ARM, John Crispin, Andy Shevchenko,
	Linux Kernel Mailing List, open list:GPIO SUBSYSTEM

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs. Each instance in DT is for a single bank.
>
> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  drivers/gpio/Kconfig       |  10 +++
>  drivers/gpio/Makefile      |   1 +
>  drivers/gpio/gpio-en7523.c | 137 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 148 insertions(+)
>  create mode 100644 drivers/gpio/gpio-en7523.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 60d9374c72c0..0e9aacbcb4bd 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -247,6 +247,16 @@ config GPIO_EM
>         help
>           Say yes here to support GPIO on Renesas Emma Mobile SoCs.
>
> +config GPIO_EN7523
> +       tristate "Airoha GPIO support"
> +       depends on ARCH_AIROHA
> +       default ARCH_AIROHA
> +       select GPIO_GENERIC
> +       select GPIOLIB_IRQCHIP
> +       help
> +         Say Y or M here to support the GPIO controller block on the
> +         Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
> +
>  config GPIO_EP93XX
>         def_bool y
>         depends on ARCH_EP93XX
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 71ee9fc2ff83..d2269ee0948e 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2)                       += gpio-dln2.o
>  obj-$(CONFIG_GPIO_DWAPB)               += gpio-dwapb.o
>  obj-$(CONFIG_GPIO_EIC_SPRD)            += gpio-eic-sprd.o
>  obj-$(CONFIG_GPIO_EM)                  += gpio-em.o
> +obj-$(CONFIG_GPIO_EN7523)              += gpio-en7523.o
>  obj-$(CONFIG_GPIO_EP93XX)              += gpio-ep93xx.o
>  obj-$(CONFIG_GPIO_EXAR)                        += gpio-exar.o
>  obj-$(CONFIG_GPIO_F7188X)              += gpio-f7188x.o
> diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
> new file mode 100644
> index 000000000000..f836a8db4c1d
> --- /dev/null
> +++ b/drivers/gpio/gpio-en7523.c
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/types.h>
> +#include <linux/io.h>
> +#include <linux/bits.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +
> +#define AIROHA_GPIO_MAX                32
> +
> +/**
> + * airoha_gpio_ctrl - Airoha GPIO driver data
> + * @gc: Associated gpio_chip instance.
> + * @data: The data register.
> + * @dir0: The direction register for the lower 16 pins.
> + * @dir1: The direction register for the higher 16 pins.
> + * @output: The output enable register.
> + */
> +struct airoha_gpio_ctrl {
> +       struct gpio_chip gc;
> +       void __iomem *data;
> +       void __iomem *dir[2];
> +       void __iomem *output;
> +};
> +
> +static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
> +{
> +       return container_of(gc, struct airoha_gpio_ctrl, gc);
> +}
> +
> +static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
> +                         int val, int out)
> +{
> +       struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> +       u32 dir = ioread32(ctrl->dir[gpio / 16]);
> +       u32 output = ioread32(ctrl->output);
> +       u32 mask = BIT((gpio % 16) * 2);
> +
> +       if (out) {
> +               dir |= mask;
> +               output |= BIT(gpio);
> +       } else {
> +               dir &= ~mask;
> +               output &= ~BIT(gpio);
> +       }
> +
> +       iowrite32(dir, ctrl->dir[gpio / 16]);
> +
> +       if (out)
> +               gc->set(gc, gpio, val);
> +
> +       iowrite32(output, ctrl->output);
> +
> +       return 0;
> +}
> +
> +static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
> +                         int val)
> +{
> +       return airoha_dir_set(gc, gpio, val, 1);
> +}
> +
> +static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       return airoha_dir_set(gc, gpio, 0, 0);
> +}
> +
> +static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> +       u32 dir = ioread32(ctrl->dir[gpio / 16]);
> +       u32 mask = BIT((gpio % 16) * 2);
> +
> +       return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
> +}
> +
> +static int airoha_gpio_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct airoha_gpio_ctrl *ctrl;
> +       int err;
> +
> +       ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> +       if (!ctrl)
> +               return -ENOMEM;
> +
> +       ctrl->data = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(ctrl->data))
> +               return PTR_ERR(ctrl->data);
> +
> +       ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
> +       if (IS_ERR(ctrl->dir[0]))
> +               return PTR_ERR(ctrl->dir[0]);
> +
> +       ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
> +       if (IS_ERR(ctrl->dir[1]))
> +               return PTR_ERR(ctrl->dir[1]);
> +
> +       ctrl->output = devm_platform_ioremap_resource(pdev, 3);
> +       if (IS_ERR(ctrl->output))
> +               return PTR_ERR(ctrl->output);
> +
> +       err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
> +                        NULL, NULL, NULL, 0);
> +       if (err)
> +               return dev_err_probe(dev, err, "unable to init generic GPIO");
> +
> +       ctrl->gc.ngpio = AIROHA_GPIO_MAX;
> +       ctrl->gc.owner = THIS_MODULE;
> +       ctrl->gc.direction_output = airoha_dir_out;
> +       ctrl->gc.direction_input = airoha_dir_in;
> +       ctrl->gc.get_direction = airoha_get_dir;
> +
> +       return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
> +}
> +
> +static const struct of_device_id airoha_gpio_of_match[] = {
> +       { .compatible = "airoha,en7523-gpio" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
> +
> +static struct platform_driver airoha_gpio_driver = {
> +       .driver = {
> +               .name = "airoha-gpio",
> +               .of_match_table = airoha_gpio_of_match,
> +       },
> +       .probe = airoha_gpio_probe,
> +};
> +module_platform_driver(airoha_gpio_driver);
> +
> +MODULE_DESCRIPTION("Airoha GPIO support");
> +MODULE_AUTHOR("John Crispin <john@phrozen.org>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.32.0 (Apple Git-132)
>

Queued for next, thanks!

Bart

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
@ 2022-02-02  9:17     ` Bartosz Golaszewski
  0 siblings, 0 replies; 69+ messages in thread
From: Bartosz Golaszewski @ 2022-02-02  9:17 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Linus Walleij, soc, moderated list:ARM/Mediatek SoC...,
	Linux ARM, John Crispin, Andy Shevchenko,
	Linux Kernel Mailing List, open list:GPIO SUBSYSTEM

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs. Each instance in DT is for a single bank.
>
> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  drivers/gpio/Kconfig       |  10 +++
>  drivers/gpio/Makefile      |   1 +
>  drivers/gpio/gpio-en7523.c | 137 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 148 insertions(+)
>  create mode 100644 drivers/gpio/gpio-en7523.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 60d9374c72c0..0e9aacbcb4bd 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -247,6 +247,16 @@ config GPIO_EM
>         help
>           Say yes here to support GPIO on Renesas Emma Mobile SoCs.
>
> +config GPIO_EN7523
> +       tristate "Airoha GPIO support"
> +       depends on ARCH_AIROHA
> +       default ARCH_AIROHA
> +       select GPIO_GENERIC
> +       select GPIOLIB_IRQCHIP
> +       help
> +         Say Y or M here to support the GPIO controller block on the
> +         Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
> +
>  config GPIO_EP93XX
>         def_bool y
>         depends on ARCH_EP93XX
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 71ee9fc2ff83..d2269ee0948e 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2)                       += gpio-dln2.o
>  obj-$(CONFIG_GPIO_DWAPB)               += gpio-dwapb.o
>  obj-$(CONFIG_GPIO_EIC_SPRD)            += gpio-eic-sprd.o
>  obj-$(CONFIG_GPIO_EM)                  += gpio-em.o
> +obj-$(CONFIG_GPIO_EN7523)              += gpio-en7523.o
>  obj-$(CONFIG_GPIO_EP93XX)              += gpio-ep93xx.o
>  obj-$(CONFIG_GPIO_EXAR)                        += gpio-exar.o
>  obj-$(CONFIG_GPIO_F7188X)              += gpio-f7188x.o
> diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
> new file mode 100644
> index 000000000000..f836a8db4c1d
> --- /dev/null
> +++ b/drivers/gpio/gpio-en7523.c
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/types.h>
> +#include <linux/io.h>
> +#include <linux/bits.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +
> +#define AIROHA_GPIO_MAX                32
> +
> +/**
> + * airoha_gpio_ctrl - Airoha GPIO driver data
> + * @gc: Associated gpio_chip instance.
> + * @data: The data register.
> + * @dir0: The direction register for the lower 16 pins.
> + * @dir1: The direction register for the higher 16 pins.
> + * @output: The output enable register.
> + */
> +struct airoha_gpio_ctrl {
> +       struct gpio_chip gc;
> +       void __iomem *data;
> +       void __iomem *dir[2];
> +       void __iomem *output;
> +};
> +
> +static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
> +{
> +       return container_of(gc, struct airoha_gpio_ctrl, gc);
> +}
> +
> +static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
> +                         int val, int out)
> +{
> +       struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> +       u32 dir = ioread32(ctrl->dir[gpio / 16]);
> +       u32 output = ioread32(ctrl->output);
> +       u32 mask = BIT((gpio % 16) * 2);
> +
> +       if (out) {
> +               dir |= mask;
> +               output |= BIT(gpio);
> +       } else {
> +               dir &= ~mask;
> +               output &= ~BIT(gpio);
> +       }
> +
> +       iowrite32(dir, ctrl->dir[gpio / 16]);
> +
> +       if (out)
> +               gc->set(gc, gpio, val);
> +
> +       iowrite32(output, ctrl->output);
> +
> +       return 0;
> +}
> +
> +static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
> +                         int val)
> +{
> +       return airoha_dir_set(gc, gpio, val, 1);
> +}
> +
> +static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       return airoha_dir_set(gc, gpio, 0, 0);
> +}
> +
> +static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> +       u32 dir = ioread32(ctrl->dir[gpio / 16]);
> +       u32 mask = BIT((gpio % 16) * 2);
> +
> +       return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
> +}
> +
> +static int airoha_gpio_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct airoha_gpio_ctrl *ctrl;
> +       int err;
> +
> +       ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> +       if (!ctrl)
> +               return -ENOMEM;
> +
> +       ctrl->data = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(ctrl->data))
> +               return PTR_ERR(ctrl->data);
> +
> +       ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
> +       if (IS_ERR(ctrl->dir[0]))
> +               return PTR_ERR(ctrl->dir[0]);
> +
> +       ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
> +       if (IS_ERR(ctrl->dir[1]))
> +               return PTR_ERR(ctrl->dir[1]);
> +
> +       ctrl->output = devm_platform_ioremap_resource(pdev, 3);
> +       if (IS_ERR(ctrl->output))
> +               return PTR_ERR(ctrl->output);
> +
> +       err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
> +                        NULL, NULL, NULL, 0);
> +       if (err)
> +               return dev_err_probe(dev, err, "unable to init generic GPIO");
> +
> +       ctrl->gc.ngpio = AIROHA_GPIO_MAX;
> +       ctrl->gc.owner = THIS_MODULE;
> +       ctrl->gc.direction_output = airoha_dir_out;
> +       ctrl->gc.direction_input = airoha_dir_in;
> +       ctrl->gc.get_direction = airoha_get_dir;
> +
> +       return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
> +}
> +
> +static const struct of_device_id airoha_gpio_of_match[] = {
> +       { .compatible = "airoha,en7523-gpio" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
> +
> +static struct platform_driver airoha_gpio_driver = {
> +       .driver = {
> +               .name = "airoha-gpio",
> +               .of_match_table = airoha_gpio_of_match,
> +       },
> +       .probe = airoha_gpio_probe,
> +};
> +module_platform_driver(airoha_gpio_driver);
> +
> +MODULE_DESCRIPTION("Airoha GPIO support");
> +MODULE_AUTHOR("John Crispin <john@phrozen.org>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.32.0 (Apple Git-132)
>

Queued for next, thanks!

Bart

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 12/13] gpio: Add support for Airoha EN7523 GPIO controller
@ 2022-02-02  9:17     ` Bartosz Golaszewski
  0 siblings, 0 replies; 69+ messages in thread
From: Bartosz Golaszewski @ 2022-02-02  9:17 UTC (permalink / raw)
  To: Felix Fietkau
  Cc: Linus Walleij, soc, moderated list:ARM/Mediatek SoC...,
	Linux ARM, John Crispin, Andy Shevchenko,
	Linux Kernel Mailing List, open list:GPIO SUBSYSTEM

On Sun, Jan 30, 2022 at 3:54 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs. Each instance in DT is for a single bank.
>
> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  drivers/gpio/Kconfig       |  10 +++
>  drivers/gpio/Makefile      |   1 +
>  drivers/gpio/gpio-en7523.c | 137 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 148 insertions(+)
>  create mode 100644 drivers/gpio/gpio-en7523.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 60d9374c72c0..0e9aacbcb4bd 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -247,6 +247,16 @@ config GPIO_EM
>         help
>           Say yes here to support GPIO on Renesas Emma Mobile SoCs.
>
> +config GPIO_EN7523
> +       tristate "Airoha GPIO support"
> +       depends on ARCH_AIROHA
> +       default ARCH_AIROHA
> +       select GPIO_GENERIC
> +       select GPIOLIB_IRQCHIP
> +       help
> +         Say Y or M here to support the GPIO controller block on the
> +         Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
> +
>  config GPIO_EP93XX
>         def_bool y
>         depends on ARCH_EP93XX
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 71ee9fc2ff83..d2269ee0948e 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2)                       += gpio-dln2.o
>  obj-$(CONFIG_GPIO_DWAPB)               += gpio-dwapb.o
>  obj-$(CONFIG_GPIO_EIC_SPRD)            += gpio-eic-sprd.o
>  obj-$(CONFIG_GPIO_EM)                  += gpio-em.o
> +obj-$(CONFIG_GPIO_EN7523)              += gpio-en7523.o
>  obj-$(CONFIG_GPIO_EP93XX)              += gpio-ep93xx.o
>  obj-$(CONFIG_GPIO_EXAR)                        += gpio-exar.o
>  obj-$(CONFIG_GPIO_F7188X)              += gpio-f7188x.o
> diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
> new file mode 100644
> index 000000000000..f836a8db4c1d
> --- /dev/null
> +++ b/drivers/gpio/gpio-en7523.c
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/types.h>
> +#include <linux/io.h>
> +#include <linux/bits.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +
> +#define AIROHA_GPIO_MAX                32
> +
> +/**
> + * airoha_gpio_ctrl - Airoha GPIO driver data
> + * @gc: Associated gpio_chip instance.
> + * @data: The data register.
> + * @dir0: The direction register for the lower 16 pins.
> + * @dir1: The direction register for the higher 16 pins.
> + * @output: The output enable register.
> + */
> +struct airoha_gpio_ctrl {
> +       struct gpio_chip gc;
> +       void __iomem *data;
> +       void __iomem *dir[2];
> +       void __iomem *output;
> +};
> +
> +static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
> +{
> +       return container_of(gc, struct airoha_gpio_ctrl, gc);
> +}
> +
> +static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
> +                         int val, int out)
> +{
> +       struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> +       u32 dir = ioread32(ctrl->dir[gpio / 16]);
> +       u32 output = ioread32(ctrl->output);
> +       u32 mask = BIT((gpio % 16) * 2);
> +
> +       if (out) {
> +               dir |= mask;
> +               output |= BIT(gpio);
> +       } else {
> +               dir &= ~mask;
> +               output &= ~BIT(gpio);
> +       }
> +
> +       iowrite32(dir, ctrl->dir[gpio / 16]);
> +
> +       if (out)
> +               gc->set(gc, gpio, val);
> +
> +       iowrite32(output, ctrl->output);
> +
> +       return 0;
> +}
> +
> +static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
> +                         int val)
> +{
> +       return airoha_dir_set(gc, gpio, val, 1);
> +}
> +
> +static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       return airoha_dir_set(gc, gpio, 0, 0);
> +}
> +
> +static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> +       u32 dir = ioread32(ctrl->dir[gpio / 16]);
> +       u32 mask = BIT((gpio % 16) * 2);
> +
> +       return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
> +}
> +
> +static int airoha_gpio_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct airoha_gpio_ctrl *ctrl;
> +       int err;
> +
> +       ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> +       if (!ctrl)
> +               return -ENOMEM;
> +
> +       ctrl->data = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(ctrl->data))
> +               return PTR_ERR(ctrl->data);
> +
> +       ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
> +       if (IS_ERR(ctrl->dir[0]))
> +               return PTR_ERR(ctrl->dir[0]);
> +
> +       ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
> +       if (IS_ERR(ctrl->dir[1]))
> +               return PTR_ERR(ctrl->dir[1]);
> +
> +       ctrl->output = devm_platform_ioremap_resource(pdev, 3);
> +       if (IS_ERR(ctrl->output))
> +               return PTR_ERR(ctrl->output);
> +
> +       err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
> +                        NULL, NULL, NULL, 0);
> +       if (err)
> +               return dev_err_probe(dev, err, "unable to init generic GPIO");
> +
> +       ctrl->gc.ngpio = AIROHA_GPIO_MAX;
> +       ctrl->gc.owner = THIS_MODULE;
> +       ctrl->gc.direction_output = airoha_dir_out;
> +       ctrl->gc.direction_input = airoha_dir_in;
> +       ctrl->gc.get_direction = airoha_get_dir;
> +
> +       return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
> +}
> +
> +static const struct of_device_id airoha_gpio_of_match[] = {
> +       { .compatible = "airoha,en7523-gpio" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
> +
> +static struct platform_driver airoha_gpio_driver = {
> +       .driver = {
> +               .name = "airoha-gpio",
> +               .of_match_table = airoha_gpio_of_match,
> +       },
> +       .probe = airoha_gpio_probe,
> +};
> +module_platform_driver(airoha_gpio_driver);
> +
> +MODULE_DESCRIPTION("Airoha GPIO support");
> +MODULE_AUTHOR("John Crispin <john@phrozen.org>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.32.0 (Apple Git-132)
>

Queued for next, thanks!

Bart

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 00/13] Add support for Airoha EN7523 SoC
  2022-01-30 14:51 ` Felix Fietkau
  (?)
@ 2022-03-01  8:08   ` Matthias Brugger
  -1 siblings, 0 replies; 69+ messages in thread
From: Matthias Brugger @ 2022-03-01  8:08 UTC (permalink / raw)
  To: Felix Fietkau; +Cc: soc, linux-mediatek, linux-arm-kernel, john



On 30/01/2022 15:51, Felix Fietkau wrote:
> This patchset adds support for the Airoha EN7523 SoC, intended primarily
> for xPON/xDSL routers.
> 

I applied patch 1, 2, 3, 4 and 13 to me tree. The rest unfortunately will need 
to go through clk and pci tree or at least need a Acked-by from the maintainers.

Thanks!
Matthias

> Felix Fietkau (4):
>    clk: en7523: Add clock driver for Airoha EN7523 SoC
>    ARM: dts: add clock support for Airoha EN7523
>    PCI: mediatek: Allow building for ARCH_AIROHA
>    ARM: dts: Add PCIe support for Airoha EN7523
> 
> John Crispin (9):
>    dt-bindings: Add vendor prefix for Airoha
>    dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
>    ARM: Add basic support for Airoha EN7523 SoC
>    ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
>    dt-bindings: Add en7523-scu device tree binding documentation
>    dt-bindings: PCI: Add support for Airoha EN7532
>    dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
>    gpio: Add support for Airoha EN7523 GPIO controller
>    ARM: dts: add GPIO support for Airoha EN7523
> 
>   .../devicetree/bindings/arm/airoha.yaml       |  28 ++
>   .../bindings/clock/airoha,en7523-scu.yaml     |  58 +++
>   .../bindings/gpio/airoha,en7523-gpio.yaml     |  67 ++++
>   .../devicetree/bindings/pci/mediatek-pcie.txt |   1 +
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>   arch/arm/Kconfig                              |  12 +
>   arch/arm/Makefile                             |   1 +
>   arch/arm/boot/dts/Makefile                    |   2 +
>   arch/arm/boot/dts/en7523-evb.dts              |  43 +++
>   arch/arm/boot/dts/en7523.dtsi                 | 205 ++++++++++
>   arch/arm/configs/multi_v7_defconfig           |   1 +
>   arch/arm/mach-airoha/Makefile                 |   2 +
>   arch/arm/mach-airoha/airoha.c                 |  16 +
>   drivers/clk/Kconfig                           |   9 +
>   drivers/clk/Makefile                          |   1 +
>   drivers/clk/clk-en7523.c                      | 350 ++++++++++++++++++
>   drivers/gpio/Kconfig                          |  10 +
>   drivers/gpio/Makefile                         |   1 +
>   drivers/gpio/gpio-en7523.c                    | 137 +++++++
>   drivers/pci/controller/Kconfig                |   2 +-
>   include/dt-bindings/clock/en7523-clk.h        |  17 +
>   21 files changed, 964 insertions(+), 1 deletion(-)
>   create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
>   create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
>   create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
>   create mode 100644 arch/arm/boot/dts/en7523-evb.dts
>   create mode 100644 arch/arm/boot/dts/en7523.dtsi
>   create mode 100644 arch/arm/mach-airoha/Makefile
>   create mode 100644 arch/arm/mach-airoha/airoha.c
>   create mode 100644 drivers/clk/clk-en7523.c
>   create mode 100644 drivers/gpio/gpio-en7523.c
>   create mode 100644 include/dt-bindings/clock/en7523-clk.h
> 

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 00/13] Add support for Airoha EN7523 SoC
@ 2022-03-01  8:08   ` Matthias Brugger
  0 siblings, 0 replies; 69+ messages in thread
From: Matthias Brugger @ 2022-03-01  8:08 UTC (permalink / raw)
  To: Felix Fietkau; +Cc: soc, linux-mediatek, linux-arm-kernel, john



On 30/01/2022 15:51, Felix Fietkau wrote:
> This patchset adds support for the Airoha EN7523 SoC, intended primarily
> for xPON/xDSL routers.
> 

I applied patch 1, 2, 3, 4 and 13 to me tree. The rest unfortunately will need 
to go through clk and pci tree or at least need a Acked-by from the maintainers.

Thanks!
Matthias

> Felix Fietkau (4):
>    clk: en7523: Add clock driver for Airoha EN7523 SoC
>    ARM: dts: add clock support for Airoha EN7523
>    PCI: mediatek: Allow building for ARCH_AIROHA
>    ARM: dts: Add PCIe support for Airoha EN7523
> 
> John Crispin (9):
>    dt-bindings: Add vendor prefix for Airoha
>    dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
>    ARM: Add basic support for Airoha EN7523 SoC
>    ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
>    dt-bindings: Add en7523-scu device tree binding documentation
>    dt-bindings: PCI: Add support for Airoha EN7532
>    dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
>    gpio: Add support for Airoha EN7523 GPIO controller
>    ARM: dts: add GPIO support for Airoha EN7523
> 
>   .../devicetree/bindings/arm/airoha.yaml       |  28 ++
>   .../bindings/clock/airoha,en7523-scu.yaml     |  58 +++
>   .../bindings/gpio/airoha,en7523-gpio.yaml     |  67 ++++
>   .../devicetree/bindings/pci/mediatek-pcie.txt |   1 +
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>   arch/arm/Kconfig                              |  12 +
>   arch/arm/Makefile                             |   1 +
>   arch/arm/boot/dts/Makefile                    |   2 +
>   arch/arm/boot/dts/en7523-evb.dts              |  43 +++
>   arch/arm/boot/dts/en7523.dtsi                 | 205 ++++++++++
>   arch/arm/configs/multi_v7_defconfig           |   1 +
>   arch/arm/mach-airoha/Makefile                 |   2 +
>   arch/arm/mach-airoha/airoha.c                 |  16 +
>   drivers/clk/Kconfig                           |   9 +
>   drivers/clk/Makefile                          |   1 +
>   drivers/clk/clk-en7523.c                      | 350 ++++++++++++++++++
>   drivers/gpio/Kconfig                          |  10 +
>   drivers/gpio/Makefile                         |   1 +
>   drivers/gpio/gpio-en7523.c                    | 137 +++++++
>   drivers/pci/controller/Kconfig                |   2 +-
>   include/dt-bindings/clock/en7523-clk.h        |  17 +
>   21 files changed, 964 insertions(+), 1 deletion(-)
>   create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
>   create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
>   create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
>   create mode 100644 arch/arm/boot/dts/en7523-evb.dts
>   create mode 100644 arch/arm/boot/dts/en7523.dtsi
>   create mode 100644 arch/arm/mach-airoha/Makefile
>   create mode 100644 arch/arm/mach-airoha/airoha.c
>   create mode 100644 drivers/clk/clk-en7523.c
>   create mode 100644 drivers/gpio/gpio-en7523.c
>   create mode 100644 include/dt-bindings/clock/en7523-clk.h
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 00/13] Add support for Airoha EN7523 SoC
@ 2022-03-01  8:08   ` Matthias Brugger
  0 siblings, 0 replies; 69+ messages in thread
From: Matthias Brugger @ 2022-03-01  8:08 UTC (permalink / raw)
  To: Felix Fietkau; +Cc: soc, linux-mediatek, linux-arm-kernel, john



On 30/01/2022 15:51, Felix Fietkau wrote:
> This patchset adds support for the Airoha EN7523 SoC, intended primarily
> for xPON/xDSL routers.
> 

I applied patch 1, 2, 3, 4 and 13 to me tree. The rest unfortunately will need 
to go through clk and pci tree or at least need a Acked-by from the maintainers.

Thanks!
Matthias

> Felix Fietkau (4):
>    clk: en7523: Add clock driver for Airoha EN7523 SoC
>    ARM: dts: add clock support for Airoha EN7523
>    PCI: mediatek: Allow building for ARCH_AIROHA
>    ARM: dts: Add PCIe support for Airoha EN7523
> 
> John Crispin (9):
>    dt-bindings: Add vendor prefix for Airoha
>    dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
>    ARM: Add basic support for Airoha EN7523 SoC
>    ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
>    dt-bindings: Add en7523-scu device tree binding documentation
>    dt-bindings: PCI: Add support for Airoha EN7532
>    dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
>    gpio: Add support for Airoha EN7523 GPIO controller
>    ARM: dts: add GPIO support for Airoha EN7523
> 
>   .../devicetree/bindings/arm/airoha.yaml       |  28 ++
>   .../bindings/clock/airoha,en7523-scu.yaml     |  58 +++
>   .../bindings/gpio/airoha,en7523-gpio.yaml     |  67 ++++
>   .../devicetree/bindings/pci/mediatek-pcie.txt |   1 +
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>   arch/arm/Kconfig                              |  12 +
>   arch/arm/Makefile                             |   1 +
>   arch/arm/boot/dts/Makefile                    |   2 +
>   arch/arm/boot/dts/en7523-evb.dts              |  43 +++
>   arch/arm/boot/dts/en7523.dtsi                 | 205 ++++++++++
>   arch/arm/configs/multi_v7_defconfig           |   1 +
>   arch/arm/mach-airoha/Makefile                 |   2 +
>   arch/arm/mach-airoha/airoha.c                 |  16 +
>   drivers/clk/Kconfig                           |   9 +
>   drivers/clk/Makefile                          |   1 +
>   drivers/clk/clk-en7523.c                      | 350 ++++++++++++++++++
>   drivers/gpio/Kconfig                          |  10 +
>   drivers/gpio/Makefile                         |   1 +
>   drivers/gpio/gpio-en7523.c                    | 137 +++++++
>   drivers/pci/controller/Kconfig                |   2 +-
>   include/dt-bindings/clock/en7523-clk.h        |  17 +
>   21 files changed, 964 insertions(+), 1 deletion(-)
>   create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
>   create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
>   create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
>   create mode 100644 arch/arm/boot/dts/en7523-evb.dts
>   create mode 100644 arch/arm/boot/dts/en7523.dtsi
>   create mode 100644 arch/arm/mach-airoha/Makefile
>   create mode 100644 arch/arm/mach-airoha/airoha.c
>   create mode 100644 drivers/clk/clk-en7523.c
>   create mode 100644 drivers/gpio/gpio-en7523.c
>   create mode 100644 include/dt-bindings/clock/en7523-clk.h
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 06/13] clk: en7523: Add clock driver for Airoha EN7523 SoC
  2022-01-30 14:51   ` Felix Fietkau
  (?)
@ 2022-03-11  0:47     ` Stephen Boyd
  -1 siblings, 0 replies; 69+ messages in thread
From: Stephen Boyd @ 2022-03-11  0:47 UTC (permalink / raw)
  To: Felix Fietkau, Michael Turquette
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel, linux-clk

Quoting Felix Fietkau (2022-01-30 06:51:09)
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> new file mode 100644
> index 000000000000..137e13520ad9
> --- /dev/null
> +++ b/drivers/clk/clk-en7523.c
> @@ -0,0 +1,350 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/delay.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/en7523-clk.h>
> +
> +#define REG_PCI_CONTROL                        0x88
> +#define   REG_PCI_CONTROL_PERSTOUT     BIT(29)
> +#define   REG_PCI_CONTROL_PERSTOUT1    BIT(26)
> +#define   REG_PCI_CONTROL_REFCLK_EN1   BIT(22)
> +#define REG_GSW_CLK_DIV_SEL            0x1b4
> +#define REG_EMI_CLK_DIV_SEL            0x1b8
> +#define REG_BUS_CLK_DIV_SEL            0x1bc
> +#define REG_SPI_CLK_DIV_SEL            0x1c4
> +#define REG_SPI_CLK_FREQ_SEL           0x1c8
> +#define REG_NPU_CLK_DIV_SEL            0x1fc
> +#define REG_CRYPTO_CLKSRC              0x200
> +#define REG_RESET_CONTROL              0x834
> +#define   REG_RESET_CONTROL_PCIEHB     BIT(29)
> +#define   REG_RESET_CONTROL_PCIE1      BIT(27)
> +#define   REG_RESET_CONTROL_PCIE2      BIT(26)
> +
> +struct en_clk_desc {
> +       int id;
> +       const char *name;
> +       u32 base_reg;
> +       u32 base_bits;
> +       u32 base_shift;
> +       union {
> +               const u32 *base_values;
> +               u32 base_value;

Just use unsigned int?

> +       };
> +       int n_base_values;

size_t?

> +
> +       u32 div_reg;

u16?

> +       u32 div_bits;

u8?

> +       u32 div_shift;

u8?

> +       u32 div_val0;
> +       u32 div_step;

u8?

> +};
> +
> +struct en_clk_gate {
> +       void __iomem *base;
> +       struct clk_hw hw;
> +};
> +
> +static const u32 gsw_base[] = { 400000000, 500000000 };
> +static const u32 emi_base[] = { 333000000, 400000000 };
> +static const u32 bus_base[] = { 500000000, 540000000 };
> +static const u32 slic_base[] = { 100000000, 3125000 };
> +static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
> +
> +static const struct en_clk_desc en7523_base_clks[] = {
> +       {
> +               .id = EN7523_CLK_GSW,
> +               .name = "gsw",
> +
> +               .base_reg = REG_GSW_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = gsw_base,
> +               .n_base_values = ARRAY_SIZE(gsw_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_EMI,
> +               .name = "emi",
> +
> +               .base_reg = REG_EMI_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = emi_base,
> +               .n_base_values = ARRAY_SIZE(emi_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_BUS,
> +               .name = "bus",
> +
> +               .base_reg = REG_BUS_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = bus_base,
> +               .n_base_values = ARRAY_SIZE(bus_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_SLIC,
> +               .name = "slic",
> +
> +               .base_reg = REG_SPI_CLK_FREQ_SEL,
> +               .base_bits = 1,
> +               .base_shift = 0,
> +               .base_values = slic_base,
> +               .n_base_values = ARRAY_SIZE(slic_base),
> +
> +               .div_reg = REG_SPI_CLK_DIV_SEL,
> +               .div_bits = 5,
> +               .div_shift = 24,
> +               .div_val0 = 20,
> +               .div_step = 2,
> +       }, {
> +               .id = EN7523_CLK_SPI,
> +               .name = "spi",
> +
> +               .base_reg = REG_SPI_CLK_DIV_SEL,
> +
> +               .base_value = 400000000,
> +
> +               .div_bits = 5,
> +               .div_shift = 8,
> +               .div_val0 = 40,
> +               .div_step = 2,
> +       }, {
> +               .id = EN7523_CLK_NPU,
> +               .name = "npu",
> +
> +               .base_reg = REG_NPU_CLK_DIV_SEL,
> +               .base_bits = 2,
> +               .base_shift = 8,
> +               .base_values = npu_base,
> +               .n_base_values = ARRAY_SIZE(npu_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_CRYPTO,
> +               .name = "crypto",
> +
> +               .base_reg = REG_CRYPTO_CLKSRC,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = emi_base,
> +               .n_base_values = ARRAY_SIZE(emi_base),
> +       }
> +};
> +
> +static const struct of_device_id of_match_clk_en7523[] = {
> +       { .compatible = "airoha,en7523-scu", },
> +       { /* sentinel */ }
> +};
> +
> +static u32 en7523_get_base_rate(void __iomem *base, int i)

static unsigned int?
unsigned int i?

> +{
> +       const struct en_clk_desc *desc = &en7523_base_clks[i];
> +       u32 val;
> +
> +       if (!desc->base_bits)
> +               return desc->base_value;
> +
> +       val = readl(base + desc->base_reg);
> +       val >>= desc->base_shift;
> +       val &= (1 << desc->base_bits) - 1;
> +
> +       if (val >= desc->n_base_values)
> +               return 0;
> +
> +       return desc->base_values[val];
> +}
> +
> +static u32 en7523_get_div(void __iomem *base, int i)
> +{
> +       const struct en_clk_desc *desc = &en7523_base_clks[i];
> +       u32 reg, val;
> +
> +       if (!desc->div_bits)
> +               return 1;
> +
> +       reg = desc->div_reg ? desc->div_reg : desc->base_reg;
> +       val = readl(base + reg);
> +       val >>= desc->div_shift;
> +       val &= (1 << desc->div_bits) - 1;
> +
> +       if (!val && desc->div_val0)
> +               return desc->div_val0;
> +
> +       return (val + 1) * desc->div_step;
> +}
> +
> +static int en7523_pci_is_enabled(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +
> +       return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
> +}
> +
> +static int en7523_pci_prepare(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +       void __iomem *np_base = cg->base;
> +       u32 val, mask;
> +
> +       /* Need to pull device low before reset */
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
> +       writel(val, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +
> +       /* Enable PCIe port 1 */
> +       val |= REG_PCI_CONTROL_REFCLK_EN1;
> +       writel(val, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +
> +       /* Reset to default */
> +       val = readl(np_base + REG_RESET_CONTROL);
> +       mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
> +              REG_RESET_CONTROL_PCIEHB;
> +       writel(val & ~mask, np_base + REG_RESET_CONTROL);
> +       usleep_range(1000, 2000);
> +       writel(val | mask, np_base + REG_RESET_CONTROL);
> +       msleep(100);
> +       writel(val & ~mask, np_base + REG_RESET_CONTROL);
> +       usleep_range(5000, 10000);
> +
> +       /* Release device */
> +       mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       writel(val & ~mask, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +       writel(val | mask, np_base + REG_PCI_CONTROL);
> +       msleep(250);
> +
> +       return 0;
> +}
> +
> +static void en7523_pci_unprepare(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +       void __iomem *np_base = cg->base;
> +       u32 val;
> +
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       val &= ~REG_PCI_CONTROL_REFCLK_EN1;
> +       writel(val, np_base + REG_PCI_CONTROL);
> +}
> +
> +static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
> +                                              void __iomem *np_base)
> +{
> +       static const struct clk_ops pcie_gate_ops = {
> +               .is_enabled = en7523_pci_is_enabled,
> +               .prepare = en7523_pci_prepare,
> +               .unprepare = en7523_pci_unprepare,
> +       };
> +       struct clk_init_data init = {
> +               .name = "pcie",
> +               .ops = &pcie_gate_ops,
> +       };
> +       struct en_clk_gate *cg;
> +
> +       cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
> +       if (!cg)
> +               return NULL;
> +
> +       cg->base = np_base;
> +       cg->hw.init = &init;
> +       en7523_pci_unprepare(&cg->hw);
> +
> +       if (clk_hw_register(NULL, &cg->hw))

pass dev?

> +               return NULL;
> +
> +       return &cg->hw;
> +}
> +
> +static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
> +                                  void __iomem *base, void __iomem *np_base)
> +{
> +       struct clk_hw *hw;
> +       u32 rate;
> +       int i;
> +
> +       for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
> +               const struct en_clk_desc *desc = &en7523_base_clks[i];
> +
> +               rate = en7523_get_base_rate(base, i);
> +               rate /= en7523_get_div(base, i);
> +
> +               hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
> +               if (IS_ERR(hw)) {
> +                       pr_err("Failed to register clk %s: %ld\n",
> +                              desc->name, PTR_ERR(hw));
> +                       continue;
> +               }
> +
> +               clk_data->hws[desc->id] = hw;
> +       }
> +
> +       hw = en7523_register_pcie_clk(dev, np_base);
> +       clk_data->hws[EN7523_CLK_PCIE] = hw;
> +
> +       clk_data->num = EN7523_NUM_CLOCKS;
> +}
> +
> +static int en7523_clk_probe(struct platform_device *pdev)
> +{
> +       struct device_node *node = pdev->dev.of_node;
> +       struct clk_hw_onecell_data *clk_data;
> +       void __iomem *base, *np_base;
> +       int r;
> +
> +       base = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(base))
> +               return PTR_ERR(base);
> +
> +       np_base = devm_platform_ioremap_resource(pdev, 1);
> +       if (IS_ERR(base))
> +               return PTR_ERR(np_base);
> +
> +       clk_data = devm_kzalloc(&pdev->dev,
> +                               struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
> +                               GFP_KERNEL);
> +       if (!clk_data)
> +               return -ENOMEM;
> +
> +       en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
> +
> +       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
> +       if (r)
> +               dev_err(&pdev->dev,
> +                       "could not register clock provider: %s: %d\n",
> +                       pdev->name, r);
> +
> +       return r;
> +}
> +
> +static struct platform_driver clk_en7523_drv = {
> +       .probe = en7523_clk_probe,
> +       .driver = {
> +               .name = "clk-en7523",
> +               .of_match_table = of_match_clk_en7523,

suppress_bind_attrs?

> +       },
> +};

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 06/13] clk: en7523: Add clock driver for Airoha EN7523 SoC
@ 2022-03-11  0:47     ` Stephen Boyd
  0 siblings, 0 replies; 69+ messages in thread
From: Stephen Boyd @ 2022-03-11  0:47 UTC (permalink / raw)
  To: Felix Fietkau, Michael Turquette
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel, linux-clk

Quoting Felix Fietkau (2022-01-30 06:51:09)
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> new file mode 100644
> index 000000000000..137e13520ad9
> --- /dev/null
> +++ b/drivers/clk/clk-en7523.c
> @@ -0,0 +1,350 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/delay.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/en7523-clk.h>
> +
> +#define REG_PCI_CONTROL                        0x88
> +#define   REG_PCI_CONTROL_PERSTOUT     BIT(29)
> +#define   REG_PCI_CONTROL_PERSTOUT1    BIT(26)
> +#define   REG_PCI_CONTROL_REFCLK_EN1   BIT(22)
> +#define REG_GSW_CLK_DIV_SEL            0x1b4
> +#define REG_EMI_CLK_DIV_SEL            0x1b8
> +#define REG_BUS_CLK_DIV_SEL            0x1bc
> +#define REG_SPI_CLK_DIV_SEL            0x1c4
> +#define REG_SPI_CLK_FREQ_SEL           0x1c8
> +#define REG_NPU_CLK_DIV_SEL            0x1fc
> +#define REG_CRYPTO_CLKSRC              0x200
> +#define REG_RESET_CONTROL              0x834
> +#define   REG_RESET_CONTROL_PCIEHB     BIT(29)
> +#define   REG_RESET_CONTROL_PCIE1      BIT(27)
> +#define   REG_RESET_CONTROL_PCIE2      BIT(26)
> +
> +struct en_clk_desc {
> +       int id;
> +       const char *name;
> +       u32 base_reg;
> +       u32 base_bits;
> +       u32 base_shift;
> +       union {
> +               const u32 *base_values;
> +               u32 base_value;

Just use unsigned int?

> +       };
> +       int n_base_values;

size_t?

> +
> +       u32 div_reg;

u16?

> +       u32 div_bits;

u8?

> +       u32 div_shift;

u8?

> +       u32 div_val0;
> +       u32 div_step;

u8?

> +};
> +
> +struct en_clk_gate {
> +       void __iomem *base;
> +       struct clk_hw hw;
> +};
> +
> +static const u32 gsw_base[] = { 400000000, 500000000 };
> +static const u32 emi_base[] = { 333000000, 400000000 };
> +static const u32 bus_base[] = { 500000000, 540000000 };
> +static const u32 slic_base[] = { 100000000, 3125000 };
> +static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
> +
> +static const struct en_clk_desc en7523_base_clks[] = {
> +       {
> +               .id = EN7523_CLK_GSW,
> +               .name = "gsw",
> +
> +               .base_reg = REG_GSW_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = gsw_base,
> +               .n_base_values = ARRAY_SIZE(gsw_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_EMI,
> +               .name = "emi",
> +
> +               .base_reg = REG_EMI_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = emi_base,
> +               .n_base_values = ARRAY_SIZE(emi_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_BUS,
> +               .name = "bus",
> +
> +               .base_reg = REG_BUS_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = bus_base,
> +               .n_base_values = ARRAY_SIZE(bus_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_SLIC,
> +               .name = "slic",
> +
> +               .base_reg = REG_SPI_CLK_FREQ_SEL,
> +               .base_bits = 1,
> +               .base_shift = 0,
> +               .base_values = slic_base,
> +               .n_base_values = ARRAY_SIZE(slic_base),
> +
> +               .div_reg = REG_SPI_CLK_DIV_SEL,
> +               .div_bits = 5,
> +               .div_shift = 24,
> +               .div_val0 = 20,
> +               .div_step = 2,
> +       }, {
> +               .id = EN7523_CLK_SPI,
> +               .name = "spi",
> +
> +               .base_reg = REG_SPI_CLK_DIV_SEL,
> +
> +               .base_value = 400000000,
> +
> +               .div_bits = 5,
> +               .div_shift = 8,
> +               .div_val0 = 40,
> +               .div_step = 2,
> +       }, {
> +               .id = EN7523_CLK_NPU,
> +               .name = "npu",
> +
> +               .base_reg = REG_NPU_CLK_DIV_SEL,
> +               .base_bits = 2,
> +               .base_shift = 8,
> +               .base_values = npu_base,
> +               .n_base_values = ARRAY_SIZE(npu_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_CRYPTO,
> +               .name = "crypto",
> +
> +               .base_reg = REG_CRYPTO_CLKSRC,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = emi_base,
> +               .n_base_values = ARRAY_SIZE(emi_base),
> +       }
> +};
> +
> +static const struct of_device_id of_match_clk_en7523[] = {
> +       { .compatible = "airoha,en7523-scu", },
> +       { /* sentinel */ }
> +};
> +
> +static u32 en7523_get_base_rate(void __iomem *base, int i)

static unsigned int?
unsigned int i?

> +{
> +       const struct en_clk_desc *desc = &en7523_base_clks[i];
> +       u32 val;
> +
> +       if (!desc->base_bits)
> +               return desc->base_value;
> +
> +       val = readl(base + desc->base_reg);
> +       val >>= desc->base_shift;
> +       val &= (1 << desc->base_bits) - 1;
> +
> +       if (val >= desc->n_base_values)
> +               return 0;
> +
> +       return desc->base_values[val];
> +}
> +
> +static u32 en7523_get_div(void __iomem *base, int i)
> +{
> +       const struct en_clk_desc *desc = &en7523_base_clks[i];
> +       u32 reg, val;
> +
> +       if (!desc->div_bits)
> +               return 1;
> +
> +       reg = desc->div_reg ? desc->div_reg : desc->base_reg;
> +       val = readl(base + reg);
> +       val >>= desc->div_shift;
> +       val &= (1 << desc->div_bits) - 1;
> +
> +       if (!val && desc->div_val0)
> +               return desc->div_val0;
> +
> +       return (val + 1) * desc->div_step;
> +}
> +
> +static int en7523_pci_is_enabled(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +
> +       return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
> +}
> +
> +static int en7523_pci_prepare(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +       void __iomem *np_base = cg->base;
> +       u32 val, mask;
> +
> +       /* Need to pull device low before reset */
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
> +       writel(val, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +
> +       /* Enable PCIe port 1 */
> +       val |= REG_PCI_CONTROL_REFCLK_EN1;
> +       writel(val, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +
> +       /* Reset to default */
> +       val = readl(np_base + REG_RESET_CONTROL);
> +       mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
> +              REG_RESET_CONTROL_PCIEHB;
> +       writel(val & ~mask, np_base + REG_RESET_CONTROL);
> +       usleep_range(1000, 2000);
> +       writel(val | mask, np_base + REG_RESET_CONTROL);
> +       msleep(100);
> +       writel(val & ~mask, np_base + REG_RESET_CONTROL);
> +       usleep_range(5000, 10000);
> +
> +       /* Release device */
> +       mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       writel(val & ~mask, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +       writel(val | mask, np_base + REG_PCI_CONTROL);
> +       msleep(250);
> +
> +       return 0;
> +}
> +
> +static void en7523_pci_unprepare(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +       void __iomem *np_base = cg->base;
> +       u32 val;
> +
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       val &= ~REG_PCI_CONTROL_REFCLK_EN1;
> +       writel(val, np_base + REG_PCI_CONTROL);
> +}
> +
> +static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
> +                                              void __iomem *np_base)
> +{
> +       static const struct clk_ops pcie_gate_ops = {
> +               .is_enabled = en7523_pci_is_enabled,
> +               .prepare = en7523_pci_prepare,
> +               .unprepare = en7523_pci_unprepare,
> +       };
> +       struct clk_init_data init = {
> +               .name = "pcie",
> +               .ops = &pcie_gate_ops,
> +       };
> +       struct en_clk_gate *cg;
> +
> +       cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
> +       if (!cg)
> +               return NULL;
> +
> +       cg->base = np_base;
> +       cg->hw.init = &init;
> +       en7523_pci_unprepare(&cg->hw);
> +
> +       if (clk_hw_register(NULL, &cg->hw))

pass dev?

> +               return NULL;
> +
> +       return &cg->hw;
> +}
> +
> +static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
> +                                  void __iomem *base, void __iomem *np_base)
> +{
> +       struct clk_hw *hw;
> +       u32 rate;
> +       int i;
> +
> +       for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
> +               const struct en_clk_desc *desc = &en7523_base_clks[i];
> +
> +               rate = en7523_get_base_rate(base, i);
> +               rate /= en7523_get_div(base, i);
> +
> +               hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
> +               if (IS_ERR(hw)) {
> +                       pr_err("Failed to register clk %s: %ld\n",
> +                              desc->name, PTR_ERR(hw));
> +                       continue;
> +               }
> +
> +               clk_data->hws[desc->id] = hw;
> +       }
> +
> +       hw = en7523_register_pcie_clk(dev, np_base);
> +       clk_data->hws[EN7523_CLK_PCIE] = hw;
> +
> +       clk_data->num = EN7523_NUM_CLOCKS;
> +}
> +
> +static int en7523_clk_probe(struct platform_device *pdev)
> +{
> +       struct device_node *node = pdev->dev.of_node;
> +       struct clk_hw_onecell_data *clk_data;
> +       void __iomem *base, *np_base;
> +       int r;
> +
> +       base = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(base))
> +               return PTR_ERR(base);
> +
> +       np_base = devm_platform_ioremap_resource(pdev, 1);
> +       if (IS_ERR(base))
> +               return PTR_ERR(np_base);
> +
> +       clk_data = devm_kzalloc(&pdev->dev,
> +                               struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
> +                               GFP_KERNEL);
> +       if (!clk_data)
> +               return -ENOMEM;
> +
> +       en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
> +
> +       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
> +       if (r)
> +               dev_err(&pdev->dev,
> +                       "could not register clock provider: %s: %d\n",
> +                       pdev->name, r);
> +
> +       return r;
> +}
> +
> +static struct platform_driver clk_en7523_drv = {
> +       .probe = en7523_clk_probe,
> +       .driver = {
> +               .name = "clk-en7523",
> +               .of_match_table = of_match_clk_en7523,

suppress_bind_attrs?

> +       },
> +};

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 69+ messages in thread
* Re: [PATCH v9 06/13] clk: en7523: Add clock driver for Airoha EN7523 SoC
@ 2022-03-11  0:47     ` Stephen Boyd
  0 siblings, 0 replies; 69+ messages in thread
From: Stephen Boyd @ 2022-03-11  0:47 UTC (permalink / raw)
  To: Felix Fietkau, Michael Turquette
  Cc: soc, linux-mediatek, linux-arm-kernel, john, linux-kernel, linux-clk

Quoting Felix Fietkau (2022-01-30 06:51:09)
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> new file mode 100644
> index 000000000000..137e13520ad9
> --- /dev/null
> +++ b/drivers/clk/clk-en7523.c
> @@ -0,0 +1,350 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/delay.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/en7523-clk.h>
> +
> +#define REG_PCI_CONTROL                        0x88
> +#define   REG_PCI_CONTROL_PERSTOUT     BIT(29)
> +#define   REG_PCI_CONTROL_PERSTOUT1    BIT(26)
> +#define   REG_PCI_CONTROL_REFCLK_EN1   BIT(22)
> +#define REG_GSW_CLK_DIV_SEL            0x1b4
> +#define REG_EMI_CLK_DIV_SEL            0x1b8
> +#define REG_BUS_CLK_DIV_SEL            0x1bc
> +#define REG_SPI_CLK_DIV_SEL            0x1c4
> +#define REG_SPI_CLK_FREQ_SEL           0x1c8
> +#define REG_NPU_CLK_DIV_SEL            0x1fc
> +#define REG_CRYPTO_CLKSRC              0x200
> +#define REG_RESET_CONTROL              0x834
> +#define   REG_RESET_CONTROL_PCIEHB     BIT(29)
> +#define   REG_RESET_CONTROL_PCIE1      BIT(27)
> +#define   REG_RESET_CONTROL_PCIE2      BIT(26)
> +
> +struct en_clk_desc {
> +       int id;
> +       const char *name;
> +       u32 base_reg;
> +       u32 base_bits;
> +       u32 base_shift;
> +       union {
> +               const u32 *base_values;
> +               u32 base_value;

Just use unsigned int?

> +       };
> +       int n_base_values;

size_t?

> +
> +       u32 div_reg;

u16?

> +       u32 div_bits;

u8?

> +       u32 div_shift;

u8?

> +       u32 div_val0;
> +       u32 div_step;

u8?

> +};
> +
> +struct en_clk_gate {
> +       void __iomem *base;
> +       struct clk_hw hw;
> +};
> +
> +static const u32 gsw_base[] = { 400000000, 500000000 };
> +static const u32 emi_base[] = { 333000000, 400000000 };
> +static const u32 bus_base[] = { 500000000, 540000000 };
> +static const u32 slic_base[] = { 100000000, 3125000 };
> +static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
> +
> +static const struct en_clk_desc en7523_base_clks[] = {
> +       {
> +               .id = EN7523_CLK_GSW,
> +               .name = "gsw",
> +
> +               .base_reg = REG_GSW_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = gsw_base,
> +               .n_base_values = ARRAY_SIZE(gsw_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_EMI,
> +               .name = "emi",
> +
> +               .base_reg = REG_EMI_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = emi_base,
> +               .n_base_values = ARRAY_SIZE(emi_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_BUS,
> +               .name = "bus",
> +
> +               .base_reg = REG_BUS_CLK_DIV_SEL,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = bus_base,
> +               .n_base_values = ARRAY_SIZE(bus_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_SLIC,
> +               .name = "slic",
> +
> +               .base_reg = REG_SPI_CLK_FREQ_SEL,
> +               .base_bits = 1,
> +               .base_shift = 0,
> +               .base_values = slic_base,
> +               .n_base_values = ARRAY_SIZE(slic_base),
> +
> +               .div_reg = REG_SPI_CLK_DIV_SEL,
> +               .div_bits = 5,
> +               .div_shift = 24,
> +               .div_val0 = 20,
> +               .div_step = 2,
> +       }, {
> +               .id = EN7523_CLK_SPI,
> +               .name = "spi",
> +
> +               .base_reg = REG_SPI_CLK_DIV_SEL,
> +
> +               .base_value = 400000000,
> +
> +               .div_bits = 5,
> +               .div_shift = 8,
> +               .div_val0 = 40,
> +               .div_step = 2,
> +       }, {
> +               .id = EN7523_CLK_NPU,
> +               .name = "npu",
> +
> +               .base_reg = REG_NPU_CLK_DIV_SEL,
> +               .base_bits = 2,
> +               .base_shift = 8,
> +               .base_values = npu_base,
> +               .n_base_values = ARRAY_SIZE(npu_base),
> +
> +               .div_bits = 3,
> +               .div_shift = 0,
> +               .div_step = 1,
> +       }, {
> +               .id = EN7523_CLK_CRYPTO,
> +               .name = "crypto",
> +
> +               .base_reg = REG_CRYPTO_CLKSRC,
> +               .base_bits = 1,
> +               .base_shift = 8,
> +               .base_values = emi_base,
> +               .n_base_values = ARRAY_SIZE(emi_base),
> +       }
> +};
> +
> +static const struct of_device_id of_match_clk_en7523[] = {
> +       { .compatible = "airoha,en7523-scu", },
> +       { /* sentinel */ }
> +};
> +
> +static u32 en7523_get_base_rate(void __iomem *base, int i)

static unsigned int?
unsigned int i?

> +{
> +       const struct en_clk_desc *desc = &en7523_base_clks[i];
> +       u32 val;
> +
> +       if (!desc->base_bits)
> +               return desc->base_value;
> +
> +       val = readl(base + desc->base_reg);
> +       val >>= desc->base_shift;
> +       val &= (1 << desc->base_bits) - 1;
> +
> +       if (val >= desc->n_base_values)
> +               return 0;
> +
> +       return desc->base_values[val];
> +}
> +
> +static u32 en7523_get_div(void __iomem *base, int i)
> +{
> +       const struct en_clk_desc *desc = &en7523_base_clks[i];
> +       u32 reg, val;
> +
> +       if (!desc->div_bits)
> +               return 1;
> +
> +       reg = desc->div_reg ? desc->div_reg : desc->base_reg;
> +       val = readl(base + reg);
> +       val >>= desc->div_shift;
> +       val &= (1 << desc->div_bits) - 1;
> +
> +       if (!val && desc->div_val0)
> +               return desc->div_val0;
> +
> +       return (val + 1) * desc->div_step;
> +}
> +
> +static int en7523_pci_is_enabled(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +
> +       return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
> +}
> +
> +static int en7523_pci_prepare(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +       void __iomem *np_base = cg->base;
> +       u32 val, mask;
> +
> +       /* Need to pull device low before reset */
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
> +       writel(val, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +
> +       /* Enable PCIe port 1 */
> +       val |= REG_PCI_CONTROL_REFCLK_EN1;
> +       writel(val, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +
> +       /* Reset to default */
> +       val = readl(np_base + REG_RESET_CONTROL);
> +       mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
> +              REG_RESET_CONTROL_PCIEHB;
> +       writel(val & ~mask, np_base + REG_RESET_CONTROL);
> +       usleep_range(1000, 2000);
> +       writel(val | mask, np_base + REG_RESET_CONTROL);
> +       msleep(100);
> +       writel(val & ~mask, np_base + REG_RESET_CONTROL);
> +       usleep_range(5000, 10000);
> +
> +       /* Release device */
> +       mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       writel(val & ~mask, np_base + REG_PCI_CONTROL);
> +       usleep_range(1000, 2000);
> +       writel(val | mask, np_base + REG_PCI_CONTROL);
> +       msleep(250);
> +
> +       return 0;
> +}
> +
> +static void en7523_pci_unprepare(struct clk_hw *hw)
> +{
> +       struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> +       void __iomem *np_base = cg->base;
> +       u32 val;
> +
> +       val = readl(np_base + REG_PCI_CONTROL);
> +       val &= ~REG_PCI_CONTROL_REFCLK_EN1;
> +       writel(val, np_base + REG_PCI_CONTROL);
> +}
> +
> +static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
> +                                              void __iomem *np_base)
> +{
> +       static const struct clk_ops pcie_gate_ops = {
> +               .is_enabled = en7523_pci_is_enabled,
> +               .prepare = en7523_pci_prepare,
> +               .unprepare = en7523_pci_unprepare,
> +       };
> +       struct clk_init_data init = {
> +               .name = "pcie",
> +               .ops = &pcie_gate_ops,
> +       };
> +       struct en_clk_gate *cg;
> +
> +       cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
> +       if (!cg)
> +               return NULL;
> +
> +       cg->base = np_base;
> +       cg->hw.init = &init;
> +       en7523_pci_unprepare(&cg->hw);
> +
> +       if (clk_hw_register(NULL, &cg->hw))

pass dev?

> +               return NULL;
> +
> +       return &cg->hw;
> +}
> +
> +static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
> +                                  void __iomem *base, void __iomem *np_base)
> +{
> +       struct clk_hw *hw;
> +       u32 rate;
> +       int i;
> +
> +       for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
> +               const struct en_clk_desc *desc = &en7523_base_clks[i];
> +
> +               rate = en7523_get_base_rate(base, i);
> +               rate /= en7523_get_div(base, i);
> +
> +               hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
> +               if (IS_ERR(hw)) {
> +                       pr_err("Failed to register clk %s: %ld\n",
> +                              desc->name, PTR_ERR(hw));
> +                       continue;
> +               }
> +
> +               clk_data->hws[desc->id] = hw;
> +       }
> +
> +       hw = en7523_register_pcie_clk(dev, np_base);
> +       clk_data->hws[EN7523_CLK_PCIE] = hw;
> +
> +       clk_data->num = EN7523_NUM_CLOCKS;
> +}
> +
> +static int en7523_clk_probe(struct platform_device *pdev)
> +{
> +       struct device_node *node = pdev->dev.of_node;
> +       struct clk_hw_onecell_data *clk_data;
> +       void __iomem *base, *np_base;
> +       int r;
> +
> +       base = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(base))
> +               return PTR_ERR(base);
> +
> +       np_base = devm_platform_ioremap_resource(pdev, 1);
> +       if (IS_ERR(base))
> +               return PTR_ERR(np_base);
> +
> +       clk_data = devm_kzalloc(&pdev->dev,
> +                               struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
> +                               GFP_KERNEL);
> +       if (!clk_data)
> +               return -ENOMEM;
> +
> +       en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
> +
> +       r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
> +       if (r)
> +               dev_err(&pdev->dev,
> +                       "could not register clock provider: %s: %d\n",
> +                       pdev->name, r);
> +
> +       return r;
> +}
> +
> +static struct platform_driver clk_en7523_drv = {
> +       .probe = en7523_clk_probe,
> +       .driver = {
> +               .name = "clk-en7523",
> +               .of_match_table = of_match_clk_en7523,

suppress_bind_attrs?

> +       },
> +};

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 69+ messages in thread
end of thread, other threads:[~2022-03-11  0:49 UTC | newest]

Thread overview: 69+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-30 14:51 [PATCH v9 00/13] Add support for Airoha EN7523 SoC Felix Fietkau
2022-01-30 14:51 ` Felix Fietkau
2022-01-30 14:51 ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 01/13] dt-bindings: Add vendor prefix for Airoha Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 02/13] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 03/13] ARM: Add basic support for Airoha EN7523 SoC Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-31 10:51   ` Luka Perkov
2022-01-31 10:51     ` Luka Perkov
2022-01-31 10:51     ` Luka Perkov
2022-01-31 12:57     ` Felix Fietkau
2022-01-31 12:57       ` Felix Fietkau
2022-01-31 12:57       ` Felix Fietkau
2022-01-31 13:00       ` Robert Marko
2022-01-31 13:00         ` Robert Marko
2022-01-31 13:00         ` Robert Marko
2022-01-31 13:12         ` John Crispin
2022-01-31 13:12           ` John Crispin
2022-01-31 13:12           ` John Crispin
2022-01-30 14:51 ` [PATCH v9 04/13] ARM: multi_v7_defconfig: Add " Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 05/13] dt-bindings: Add en7523-scu device tree binding documentation Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 06/13] clk: en7523: Add clock driver for Airoha EN7523 SoC Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-03-11  0:47   ` Stephen Boyd
2022-03-11  0:47     ` Stephen Boyd
2022-03-11  0:47     ` Stephen Boyd
2022-01-30 14:51 ` [PATCH v9 07/13] ARM: dts: add clock support for Airoha EN7523 Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 08/13] dt-bindings: PCI: Add support for Airoha EN7532 Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 09/13] PCI: mediatek: Allow building for ARCH_AIROHA Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 10/13] ARM: dts: Add PCIe support for Airoha EN7523 Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51 ` [PATCH v9 11/13] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-02-02  9:16   ` Bartosz Golaszewski
2022-02-02  9:16     ` Bartosz Golaszewski
2022-02-02  9:16     ` Bartosz Golaszewski
2022-01-30 14:51 ` [PATCH v9 12/13] gpio: Add support for Airoha EN7523 " Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-31 11:13   ` Linus Walleij
2022-01-31 11:13     ` Linus Walleij
2022-01-31 11:13     ` Linus Walleij
2022-02-02  9:17   ` Bartosz Golaszewski
2022-02-02  9:17     ` Bartosz Golaszewski
2022-02-02  9:17     ` Bartosz Golaszewski
2022-01-30 14:51 ` [PATCH v9 13/13] ARM: dts: add GPIO support for Airoha EN7523 Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-01-30 14:51   ` Felix Fietkau
2022-03-01  8:08 ` [PATCH v9 00/13] Add support for Airoha EN7523 SoC Matthias Brugger
2022-03-01  8:08   ` Matthias Brugger
2022-03-01  8:08   ` Matthias Brugger

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.