* [PATCH] arm: kirkwood: iConnect : Add Ethernet support
@ 2022-02-02 5:59 Tony Dinh
2022-02-04 5:50 ` Stefan Roese
2022-02-10 8:18 ` Stefan Roese
0 siblings, 2 replies; 3+ messages in thread
From: Tony Dinh @ 2022-02-02 5:59 UTC (permalink / raw)
To: U-Boot Mailing List, Stefan Roese
Cc: Tom Rini, Pali Roh�r, Marek Beh�n, Tony Dinh, Luka Perkov
- Currently, CONFIG_RESET_PHY_R symbol is used in
arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
boards with mv8831116 PHY, with each board defines the function
reset_phy(). Undefine it for this board.
- Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
to bring up Ethernet.
- Miscellaneous changes: Move constants to .c file and remove header file
board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
and cleanup comments.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---
board/iomega/iconnect/iconnect.c | 17 ++++++++++++++---
board/iomega/iconnect/iconnect.h | 24 ------------------------
configs/iconnect_defconfig | 6 +++++-
include/configs/iconnect.h | 21 +++++++--------------
4 files changed, 26 insertions(+), 42 deletions(-)
delete mode 100644 board/iomega/iconnect/iconnect.h
diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
index 9e123aab00..0387160200 100644
--- a/board/iomega/iconnect/iconnect.c
+++ b/board/iomega/iconnect/iconnect.c
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
+ * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
* Copyright (C) 2009-2012
* Wojciech Dubowik <wojciech.dubowik@neratec.com>
* Luka Perkov <luka@openwrt.org>
@@ -7,15 +8,20 @@
#include <common.h>
#include <init.h>
-#include <miiphy.h>
+#include <netdev.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include <asm/global_data.h>
-#include "iconnect.h"
+#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
+#define ICONNECT_OE_LOW (~BIT(7))
+#define ICONNECT_OE_HIGH (~BIT(10))
+#define ICONNECT_OE_VAL_LOW (0)
+#define ICONNECT_OE_VAL_HIGH BIT(10)
+
int board_early_init_f(void)
{
/*
@@ -85,9 +91,14 @@ int board_early_init_f(void)
return 0;
}
+int board_eth_init(struct bd_info *bis)
+{
+ return cpu_eth_init(bis);
+}
+
int board_init(void)
{
- /* adress of boot parameters */
+ /* address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
return 0;
diff --git a/board/iomega/iconnect/iconnect.h b/board/iomega/iconnect/iconnect.h
deleted file mode 100644
index 4f0be71918..0000000000
--- a/board/iomega/iconnect/iconnect.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2009-2012
- * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <luka@openwrt.org>
- */
-
-#ifndef __ICONNECT_H
-#define __ICONNECT_H
-
-#define ICONNECT_OE_LOW (~(1 << 7))
-#define ICONNECT_OE_HIGH (~(1 << 10))
-#define ICONNECT_OE_VAL_LOW (0)
-#define ICONNECT_OE_VAL_HIGH (1 << 10)
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
-#endif /* __ICONNECT_H */
diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
index 1c9c77a292..336fae270a 100644
--- a/configs/iconnect_defconfig
+++ b/configs/iconnect_defconfig
@@ -20,7 +20,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_LATE_INIT=y
-CONFIG_SYS_PROMPT="iconnect => "
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="iConnect> "
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_PCI=y
@@ -39,11 +40,14 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
+CONFIG_DM_ETH=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_PCI=y
diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h
index f1aad1efde..44a4b4409f 100644
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
@@ -1,5 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
+ * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
* (C) Copyright 2009-2012
* Wojciech Dubowik <wojciech.dubowik@neratec.com>
* Luka Perkov <luka@openwrt.org>
@@ -10,32 +11,24 @@
#include "mv-common.h"
-/*
- * Environment variables configuration
- */
-
-/*
- * Default environment variables
- */
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
- "mtdparts="CONFIG_MTDPARTS_DEFAULT \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
"kernel=/boot/uImage\0" \
"bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
/*
* Ethernet driver configuration
+ *
+ * This board has PCIe Wifi card, so allow Ethernet to be disabled
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 11
-#undef CONFIG_RESET_PHY_R
+#ifdef CONFIG_RESET_PHY_R
+#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */
+#endif
#endif /* CONFIG_CMD_NET */
-/*
- * File system
- */
-
#endif /* _CONFIG_ICONNECT_H */
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm: kirkwood: iConnect : Add Ethernet support
2022-02-02 5:59 [PATCH] arm: kirkwood: iConnect : Add Ethernet support Tony Dinh
@ 2022-02-04 5:50 ` Stefan Roese
2022-02-10 8:18 ` Stefan Roese
1 sibling, 0 replies; 3+ messages in thread
From: Stefan Roese @ 2022-02-04 5:50 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List
Cc: Tom Rini, Pali Roh�r, Marek Beh�n, Luka Perkov
On 2/2/22 06:59, Tony Dinh wrote:
> - Currently, CONFIG_RESET_PHY_R symbol is used in
> arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
> boards with mv8831116 PHY, with each board defines the function
> reset_phy(). Undefine it for this board.
> - Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
> to bring up Ethernet.
> - Miscellaneous changes: Move constants to .c file and remove header file
> board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
> and cleanup comments.
>
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> ---
>
> board/iomega/iconnect/iconnect.c | 17 ++++++++++++++---
> board/iomega/iconnect/iconnect.h | 24 ------------------------
> configs/iconnect_defconfig | 6 +++++-
> include/configs/iconnect.h | 21 +++++++--------------
> 4 files changed, 26 insertions(+), 42 deletions(-)
> delete mode 100644 board/iomega/iconnect/iconnect.h
>
> diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
> index 9e123aab00..0387160200 100644
> --- a/board/iomega/iconnect/iconnect.c
> +++ b/board/iomega/iconnect/iconnect.c
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> + * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
> * Copyright (C) 2009-2012
> * Wojciech Dubowik <wojciech.dubowik@neratec.com>
> * Luka Perkov <luka@openwrt.org>
> @@ -7,15 +8,20 @@
>
> #include <common.h>
> #include <init.h>
> -#include <miiphy.h>
> +#include <netdev.h>
> #include <asm/arch/cpu.h>
> #include <asm/arch/soc.h>
> #include <asm/arch/mpp.h>
> #include <asm/global_data.h>
> -#include "iconnect.h"
> +#include <linux/bitops.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +#define ICONNECT_OE_LOW (~BIT(7))
> +#define ICONNECT_OE_HIGH (~BIT(10))
> +#define ICONNECT_OE_VAL_LOW (0)
> +#define ICONNECT_OE_VAL_HIGH BIT(10)
> +
> int board_early_init_f(void)
> {
> /*
> @@ -85,9 +91,14 @@ int board_early_init_f(void)
> return 0;
> }
>
> +int board_eth_init(struct bd_info *bis)
> +{
> + return cpu_eth_init(bis);
> +}
> +
> int board_init(void)
> {
> - /* adress of boot parameters */
> + /* address of boot parameters */
> gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
>
> return 0;
> diff --git a/board/iomega/iconnect/iconnect.h b/board/iomega/iconnect/iconnect.h
> deleted file mode 100644
> index 4f0be71918..0000000000
> --- a/board/iomega/iconnect/iconnect.h
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (C) 2009-2012
> - * Wojciech Dubowik <wojciech.dubowik@neratec.com>
> - * Luka Perkov <luka@openwrt.org>
> - */
> -
> -#ifndef __ICONNECT_H
> -#define __ICONNECT_H
> -
> -#define ICONNECT_OE_LOW (~(1 << 7))
> -#define ICONNECT_OE_HIGH (~(1 << 10))
> -#define ICONNECT_OE_VAL_LOW (0)
> -#define ICONNECT_OE_VAL_HIGH (1 << 10)
> -
> -/* PHY related */
> -#define MV88E1116_LED_FCTRL_REG 10
> -#define MV88E1116_CPRSP_CR3_REG 21
> -#define MV88E1116_MAC_CTRL_REG 21
> -#define MV88E1116_PGADR_REG 22
> -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
> -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
> -
> -#endif /* __ICONNECT_H */
> diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
> index 1c9c77a292..336fae270a 100644
> --- a/configs/iconnect_defconfig
> +++ b/configs/iconnect_defconfig
> @@ -20,7 +20,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi
> CONFIG_USE_PREBOOT=y
> # CONFIG_DISPLAY_BOARDINFO is not set
> CONFIG_BOARD_LATE_INIT=y
> -CONFIG_SYS_PROMPT="iconnect => "
> +CONFIG_HUSH_PARSER=y
> +CONFIG_SYS_PROMPT="iConnect> "
> # CONFIG_CMD_FLASH is not set
> CONFIG_CMD_NAND=y
> CONFIG_CMD_PCI=y
> @@ -39,11 +40,14 @@ CONFIG_OF_CONTROL=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_NETCONSOLE=y
> CONFIG_DM=y
> # CONFIG_MMC is not set
> CONFIG_MTD=y
> CONFIG_MTD_RAW_NAND=y
> +CONFIG_PHY_MARVELL=y
> +CONFIG_DM_ETH=y
> CONFIG_MVGBE=y
> CONFIG_MII=y
> CONFIG_PCI=y
> diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h
> index f1aad1efde..44a4b4409f 100644
> --- a/include/configs/iconnect.h
> +++ b/include/configs/iconnect.h
> @@ -1,5 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> + * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
> * (C) Copyright 2009-2012
> * Wojciech Dubowik <wojciech.dubowik@neratec.com>
> * Luka Perkov <luka@openwrt.org>
> @@ -10,32 +11,24 @@
>
> #include "mv-common.h"
>
> -/*
> - * Environment variables configuration
> - */
> -
> -/*
> - * Default environment variables
> - */
> -
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "console=console=ttyS0,115200\0" \
> "mtdids=nand0=orion_nand\0" \
> - "mtdparts="CONFIG_MTDPARTS_DEFAULT \
> + "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
> "kernel=/boot/uImage\0" \
> "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
>
> /*
> * Ethernet driver configuration
> + *
> + * This board has PCIe Wifi card, so allow Ethernet to be disabled
> */
> #ifdef CONFIG_CMD_NET
> #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
> #define CONFIG_PHY_BASE_ADR 11
> -#undef CONFIG_RESET_PHY_R
> +#ifdef CONFIG_RESET_PHY_R
> +#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */
> +#endif
> #endif /* CONFIG_CMD_NET */
>
> -/*
> - * File system
> - */
> -
> #endif /* _CONFIG_ICONNECT_H */
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm: kirkwood: iConnect : Add Ethernet support
2022-02-02 5:59 [PATCH] arm: kirkwood: iConnect : Add Ethernet support Tony Dinh
2022-02-04 5:50 ` Stefan Roese
@ 2022-02-10 8:18 ` Stefan Roese
1 sibling, 0 replies; 3+ messages in thread
From: Stefan Roese @ 2022-02-10 8:18 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List
Cc: Tom Rini, Pali Roh�r, Marek Beh�n, Luka Perkov
On 2/2/22 06:59, Tony Dinh wrote:
> - Currently, CONFIG_RESET_PHY_R symbol is used in
> arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood
> boards with mv8831116 PHY, with each board defines the function
> reset_phy(). Undefine it for this board.
> - Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL
> to bring up Ethernet.
> - Miscellaneous changes: Move constants to .c file and remove header file
> board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro,
> and cleanup comments.
>
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Applied to u-boot-marvell/master
Thanks,
Stefan
> ---
>
> board/iomega/iconnect/iconnect.c | 17 ++++++++++++++---
> board/iomega/iconnect/iconnect.h | 24 ------------------------
> configs/iconnect_defconfig | 6 +++++-
> include/configs/iconnect.h | 21 +++++++--------------
> 4 files changed, 26 insertions(+), 42 deletions(-)
> delete mode 100644 board/iomega/iconnect/iconnect.h
>
> diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
> index 9e123aab00..0387160200 100644
> --- a/board/iomega/iconnect/iconnect.c
> +++ b/board/iomega/iconnect/iconnect.c
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> + * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
> * Copyright (C) 2009-2012
> * Wojciech Dubowik <wojciech.dubowik@neratec.com>
> * Luka Perkov <luka@openwrt.org>
> @@ -7,15 +8,20 @@
>
> #include <common.h>
> #include <init.h>
> -#include <miiphy.h>
> +#include <netdev.h>
> #include <asm/arch/cpu.h>
> #include <asm/arch/soc.h>
> #include <asm/arch/mpp.h>
> #include <asm/global_data.h>
> -#include "iconnect.h"
> +#include <linux/bitops.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> +#define ICONNECT_OE_LOW (~BIT(7))
> +#define ICONNECT_OE_HIGH (~BIT(10))
> +#define ICONNECT_OE_VAL_LOW (0)
> +#define ICONNECT_OE_VAL_HIGH BIT(10)
> +
> int board_early_init_f(void)
> {
> /*
> @@ -85,9 +91,14 @@ int board_early_init_f(void)
> return 0;
> }
>
> +int board_eth_init(struct bd_info *bis)
> +{
> + return cpu_eth_init(bis);
> +}
> +
> int board_init(void)
> {
> - /* adress of boot parameters */
> + /* address of boot parameters */
> gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
>
> return 0;
> diff --git a/board/iomega/iconnect/iconnect.h b/board/iomega/iconnect/iconnect.h
> deleted file mode 100644
> index 4f0be71918..0000000000
> --- a/board/iomega/iconnect/iconnect.h
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (C) 2009-2012
> - * Wojciech Dubowik <wojciech.dubowik@neratec.com>
> - * Luka Perkov <luka@openwrt.org>
> - */
> -
> -#ifndef __ICONNECT_H
> -#define __ICONNECT_H
> -
> -#define ICONNECT_OE_LOW (~(1 << 7))
> -#define ICONNECT_OE_HIGH (~(1 << 10))
> -#define ICONNECT_OE_VAL_LOW (0)
> -#define ICONNECT_OE_VAL_HIGH (1 << 10)
> -
> -/* PHY related */
> -#define MV88E1116_LED_FCTRL_REG 10
> -#define MV88E1116_CPRSP_CR3_REG 21
> -#define MV88E1116_MAC_CTRL_REG 21
> -#define MV88E1116_PGADR_REG 22
> -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
> -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
> -
> -#endif /* __ICONNECT_H */
> diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
> index 1c9c77a292..336fae270a 100644
> --- a/configs/iconnect_defconfig
> +++ b/configs/iconnect_defconfig
> @@ -20,7 +20,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi
> CONFIG_USE_PREBOOT=y
> # CONFIG_DISPLAY_BOARDINFO is not set
> CONFIG_BOARD_LATE_INIT=y
> -CONFIG_SYS_PROMPT="iconnect => "
> +CONFIG_HUSH_PARSER=y
> +CONFIG_SYS_PROMPT="iConnect> "
> # CONFIG_CMD_FLASH is not set
> CONFIG_CMD_NAND=y
> CONFIG_CMD_PCI=y
> @@ -39,11 +40,14 @@ CONFIG_OF_CONTROL=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_NETCONSOLE=y
> CONFIG_DM=y
> # CONFIG_MMC is not set
> CONFIG_MTD=y
> CONFIG_MTD_RAW_NAND=y
> +CONFIG_PHY_MARVELL=y
> +CONFIG_DM_ETH=y
> CONFIG_MVGBE=y
> CONFIG_MII=y
> CONFIG_PCI=y
> diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h
> index f1aad1efde..44a4b4409f 100644
> --- a/include/configs/iconnect.h
> +++ b/include/configs/iconnect.h
> @@ -1,5 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> + * Copyright (C) 2022 Tony Dinh <mibodhi@gmail.com>
> * (C) Copyright 2009-2012
> * Wojciech Dubowik <wojciech.dubowik@neratec.com>
> * Luka Perkov <luka@openwrt.org>
> @@ -10,32 +11,24 @@
>
> #include "mv-common.h"
>
> -/*
> - * Environment variables configuration
> - */
> -
> -/*
> - * Default environment variables
> - */
> -
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "console=console=ttyS0,115200\0" \
> "mtdids=nand0=orion_nand\0" \
> - "mtdparts="CONFIG_MTDPARTS_DEFAULT \
> + "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
> "kernel=/boot/uImage\0" \
> "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
>
> /*
> * Ethernet driver configuration
> + *
> + * This board has PCIe Wifi card, so allow Ethernet to be disabled
> */
> #ifdef CONFIG_CMD_NET
> #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
> #define CONFIG_PHY_BASE_ADR 11
> -#undef CONFIG_RESET_PHY_R
> +#ifdef CONFIG_RESET_PHY_R
> +#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */
> +#endif
> #endif /* CONFIG_CMD_NET */
>
> -/*
> - * File system
> - */
> -
> #endif /* _CONFIG_ICONNECT_H */
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-02-10 8:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-02 5:59 [PATCH] arm: kirkwood: iConnect : Add Ethernet support Tony Dinh
2022-02-04 5:50 ` Stefan Roese
2022-02-10 8:18 ` Stefan Roese
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.