From: Charles Mirabile <cmirabil@redhat.com> To: linux-kernel@vger.kernel.org Cc: Charles Mirabile <cmirabil@redhat.com>, Serge Schneider <serge@raspberrypi.org>, Stefan Wahren <stefan.wahren@i2se.com>, Nicolas Saenz Julienne <nsaenzju@redhat.com>, Mattias Brugger <mbrugger@suse.com>, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, fedora-rpi@googlegroups.com, Mwesigwa Guma <mguma@redhat.com>, Joel Savitz <jsavitz@redhat.com> Subject: [PATCH 6/6] DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4 Date: Wed, 2 Feb 2022 19:25:21 -0500 [thread overview] Message-ID: <20220203002521.162878-7-cmirabil@redhat.com> (raw) In-Reply-To: <20220203002521.162878-1-cmirabil@redhat.com> This patch shold not be merged - dtbs files are not stored in the kernel tree. We just provide this file so the code can be tested. This overlay is suitable for testing the driver, it can be compiled with dtc and put in the /boot/overlays/ folder then specified in config.txt by putting the lines: dtoverlay= #suppress loading of default overlay for HAT dtoverlay=sensehat #load custom overlay at the beginning before any other lines in config.txt Co-developed-by: Mwesigwa Guma <mguma@redhat.com> Signed-off-by: Mwesigwa Guma <mguma@redhat.com> Co-developed-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Charles Mirabile <cmirabil@redhat.com> --- sensehat.dtbs | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 sensehat.dtbs diff --git a/sensehat.dtbs b/sensehat.dtbs new file mode 100644 index 000000000000..5f1a9d62c9f4 --- /dev/null +++ b/sensehat.dtbs @@ -0,0 +1,56 @@ +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2835"; +}; + +&i2c1 { + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "okay"; + + sensehat@46 { + #address-cells = <0x01>; + #size-cells = <0x00>; + compatible = "raspberrypi,sensehat"; + reg = <0x46>; + interrupt-parent = <&gpio>; + status = "okay"; + display@0 { + compatible = "raspberrypi,sensehat-display"; + reg = <0x0>; + status = "okay"; + }; + joystick@f2 { + compatible = "raspberrypi,sensehat-joystick"; + reg = <0xf2>; + interrupts = <23 1>; + status = "okay"; + }; + }; + + lsm9ds1-magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + status = "okay"; + }; + + lsm9ds1-accel@6a { + compatible = "st,lsm9ds1-accel"; + reg = <0x6a>; + status = "okay"; + }; + + lps25h-press@5c { + compatible = "st,lps25h-press"; + reg = <0x5c>; + status = "okay"; + }; + + hts221-humid@5f { + compatible = "st,hts221-humid\0st,hts221"; + reg = <0x5f>; + status = "okay"; + }; +}; -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Charles Mirabile <cmirabil@redhat.com> To: linux-kernel@vger.kernel.org Cc: Charles Mirabile <cmirabil@redhat.com>, Serge Schneider <serge@raspberrypi.org>, Stefan Wahren <stefan.wahren@i2se.com>, Nicolas Saenz Julienne <nsaenzju@redhat.com>, Mattias Brugger <mbrugger@suse.com>, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, fedora-rpi@googlegroups.com, Mwesigwa Guma <mguma@redhat.com>, Joel Savitz <jsavitz@redhat.com> Subject: [PATCH 6/6] DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4 Date: Wed, 2 Feb 2022 19:25:21 -0500 [thread overview] Message-ID: <20220203002521.162878-7-cmirabil@redhat.com> (raw) In-Reply-To: <20220203002521.162878-1-cmirabil@redhat.com> This patch shold not be merged - dtbs files are not stored in the kernel tree. We just provide this file so the code can be tested. This overlay is suitable for testing the driver, it can be compiled with dtc and put in the /boot/overlays/ folder then specified in config.txt by putting the lines: dtoverlay= #suppress loading of default overlay for HAT dtoverlay=sensehat #load custom overlay at the beginning before any other lines in config.txt Co-developed-by: Mwesigwa Guma <mguma@redhat.com> Signed-off-by: Mwesigwa Guma <mguma@redhat.com> Co-developed-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Charles Mirabile <cmirabil@redhat.com> --- sensehat.dtbs | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 sensehat.dtbs diff --git a/sensehat.dtbs b/sensehat.dtbs new file mode 100644 index 000000000000..5f1a9d62c9f4 --- /dev/null +++ b/sensehat.dtbs @@ -0,0 +1,56 @@ +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2835"; +}; + +&i2c1 { + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "okay"; + + sensehat@46 { + #address-cells = <0x01>; + #size-cells = <0x00>; + compatible = "raspberrypi,sensehat"; + reg = <0x46>; + interrupt-parent = <&gpio>; + status = "okay"; + display@0 { + compatible = "raspberrypi,sensehat-display"; + reg = <0x0>; + status = "okay"; + }; + joystick@f2 { + compatible = "raspberrypi,sensehat-joystick"; + reg = <0xf2>; + interrupts = <23 1>; + status = "okay"; + }; + }; + + lsm9ds1-magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + status = "okay"; + }; + + lsm9ds1-accel@6a { + compatible = "st,lsm9ds1-accel"; + reg = <0x6a>; + status = "okay"; + }; + + lps25h-press@5c { + compatible = "st,lps25h-press"; + reg = <0x5c>; + status = "okay"; + }; + + hts221-humid@5f { + compatible = "st,hts221-humid\0st,hts221"; + reg = <0x5f>; + status = "okay"; + }; +}; -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-03 0:26 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-02-03 0:25 [PATCH 0/6] Raspberry Pi Sense HAT driver Charles Mirabile 2022-02-03 0:25 ` Charles Mirabile 2022-02-03 0:25 ` [PATCH 1/6] drivers/mfd: sensehat: Add Raspberry Pi Sense HAT to simple_mfd_i2c Charles Mirabile 2022-02-03 0:25 ` Charles Mirabile 2022-02-08 11:23 ` Nicolas Saenz Julienne 2022-02-08 11:23 ` Nicolas Saenz Julienne 2022-02-03 0:25 ` [PATCH 2/6] drivers/input/joystick: sensehat: Raspberry Pi Sense HAT joystick driver Charles Mirabile 2022-02-03 0:25 ` Charles Mirabile 2022-02-08 11:44 ` Nicolas Saenz Julienne 2022-02-08 11:44 ` Nicolas Saenz Julienne 2022-02-03 0:25 ` [PATCH 3/6] drivers/auxdisplay: sensehat: Raspberry Pi Sense HAT display driver Charles Mirabile 2022-02-03 0:25 ` Charles Mirabile 2022-02-08 12:36 ` Nicolas Saenz Julienne 2022-02-08 12:36 ` Nicolas Saenz Julienne 2022-02-08 14:00 ` Miguel Ojeda 2022-02-08 14:00 ` Miguel Ojeda 2022-02-03 0:25 ` [PATCH 4/6] dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema Charles Mirabile 2022-02-03 0:25 ` Charles Mirabile 2022-02-03 13:50 ` Rob Herring 2022-02-03 13:50 ` Rob Herring 2022-02-03 0:25 ` [PATCH 5/6] MAINTAINERS: Add sensehat driver authors to MAINTAINERS Charles Mirabile 2022-02-03 0:25 ` Charles Mirabile 2022-02-03 0:25 ` Charles Mirabile [this message] 2022-02-03 0:25 ` [PATCH 6/6] DO NOT MERGE: full sensehat device tree overlay for raspberry pi 4 Charles Mirabile
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220203002521.162878-7-cmirabil@redhat.com \ --to=cmirabil@redhat.com \ --cc=fedora-rpi@googlegroups.com \ --cc=jsavitz@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=mbrugger@suse.com \ --cc=mguma@redhat.com \ --cc=nsaenzju@redhat.com \ --cc=serge@raspberrypi.org \ --cc=stefan.wahren@i2se.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.