* [PATCH v3 0/8] dt-bindings: memory: convert to dtschema
@ 2022-02-06 13:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:57 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Hi,
Changes since v2:
1. Re-order patches so timings get converted earlier. This fixes dt-checker
robot report.
2. Add Dmitry's review tag.
3. Three new patches:
#6: dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
#7: memory: of: parse max-freq property
#8: ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
Changes since v1:
1. Drop patch 1 (ARM dts) - applied.
2. Correct description in lpddr2-timings (Dmitry).
Best regards,
Krzysztof
Krzysztof Kozlowski (8):
dt-bindings: memory: lpddr2-timings: convert to dtschema
dt-bindings: memory: lpddr3-timings: convert to dtschema
dt-bindings: memory: lpddr3: convert to dtschema
dt-bindings: memory: lpddr3: adjust IO width to spec
dt-bindings: memory: lpddr3: deprecate manufacturer ID
dt-bindings: memory: lpddr3: deprecate passing timings frequency as
unit address
memory: of: parse max-freq property
ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on
Odroid
.../ddr/jedec,lpddr2-timings.yaml | 135 +++++++++
.../memory-controllers/ddr/jedec,lpddr2.yaml | 6 +-
.../ddr/jedec,lpddr3-timings.yaml | 157 +++++++++++
.../memory-controllers/ddr/jedec,lpddr3.yaml | 263 ++++++++++++++++++
.../memory-controllers/ddr/lpddr2-timings.txt | 52 ----
.../memory-controllers/ddr/lpddr3-timings.txt | 58 ----
.../memory-controllers/ddr/lpddr3.txt | 107 -------
.../samsung,exynos5422-dmc.yaml | 3 +-
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 +-
drivers/memory/of_memory.c | 6 +-
10 files changed, 564 insertions(+), 230 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
--
2.32.0
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 0/8] dt-bindings: memory: convert to dtschema
@ 2022-02-06 13:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:57 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Hi,
Changes since v2:
1. Re-order patches so timings get converted earlier. This fixes dt-checker
robot report.
2. Add Dmitry's review tag.
3. Three new patches:
#6: dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
#7: memory: of: parse max-freq property
#8: ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
Changes since v1:
1. Drop patch 1 (ARM dts) - applied.
2. Correct description in lpddr2-timings (Dmitry).
Best regards,
Krzysztof
Krzysztof Kozlowski (8):
dt-bindings: memory: lpddr2-timings: convert to dtschema
dt-bindings: memory: lpddr3-timings: convert to dtschema
dt-bindings: memory: lpddr3: convert to dtschema
dt-bindings: memory: lpddr3: adjust IO width to spec
dt-bindings: memory: lpddr3: deprecate manufacturer ID
dt-bindings: memory: lpddr3: deprecate passing timings frequency as
unit address
memory: of: parse max-freq property
ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on
Odroid
.../ddr/jedec,lpddr2-timings.yaml | 135 +++++++++
.../memory-controllers/ddr/jedec,lpddr2.yaml | 6 +-
.../ddr/jedec,lpddr3-timings.yaml | 157 +++++++++++
.../memory-controllers/ddr/jedec,lpddr3.yaml | 263 ++++++++++++++++++
.../memory-controllers/ddr/lpddr2-timings.txt | 52 ----
.../memory-controllers/ddr/lpddr3-timings.txt | 58 ----
.../memory-controllers/ddr/lpddr3.txt | 107 -------
.../samsung,exynos5422-dmc.yaml | 3 +-
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 +-
drivers/memory/of_memory.c | 6 +-
10 files changed, 564 insertions(+), 230 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 1/8] dt-bindings: memory: lpddr2-timings: convert to dtschema
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Convert the LPDDR2 memory timings bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
---
.../ddr/jedec,lpddr2-timings.yaml | 135 ++++++++++++++++++
.../memory-controllers/ddr/jedec,lpddr2.yaml | 6 +-
.../memory-controllers/ddr/lpddr2-timings.txt | 52 -------
3 files changed, 137 insertions(+), 56 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
new file mode 100644
index 000000000000..f3e62ee07126
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ const: jedec,lpddr2-timings
+
+ max-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Maximum DDR clock frequency for the speed-bin, in Hz.
+
+ min-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Minimum DDR clock frequency for the speed-bin, in Hz.
+
+ tCKESR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ CKE minimum pulse width during SELF REFRESH (low pulse width during
+ SELF REFRESH) in pico seconds.
+
+ tDQSCK-max:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DQS output data access time from CK_t/CK_c in pico seconds.
+
+ tDQSCK-max-derated:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DQS output data access time from CK_t/CK_c, temperature de-rated, in pico
+ seconds.
+
+ tFAW:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Four-bank activate window in pico seconds.
+
+ tRAS-max-ns:
+ description: |
+ Row active time in nano seconds.
+
+ tRAS-min:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row active time in pico seconds.
+
+ tRCD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RAS-to-CAS delay in pico seconds.
+
+ tRPab:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row precharge time (all banks) in pico seconds.
+
+ tRRD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Active bank A to active bank B in pico seconds.
+
+ tRTP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal READ to PRECHARGE command delay in pico seconds.
+
+ tWR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ WRITE recovery time in pico seconds.
+
+ tWTR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal WRITE-to-READ command delay in pico seconds.
+
+ tXP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Exit power-down to next valid command delay in pico seconds.
+
+ tZQCL:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Long calibration time in pico seconds.
+
+ tZQCS:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Short calibration time in pico seconds.
+
+ tZQinit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Initialization calibration time in pico seconds.
+
+required:
+ - compatible
+ - min-freq
+ - max-freq
+
+additionalProperties: false
+
+examples:
+ - |
+ timings {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tRAS-max-ns = <70000>;
+ tRAS-min = <42000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tRRD = <10000>;
+ tRTP = <7500>;
+ tWR = <15000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tZQCL = <360000>;
+ tZQCS = <90000>;
+ tZQinit = <1000000>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
index 25ed0266f6dd..2d8a701e2a05 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -142,14 +142,12 @@ properties:
patternProperties:
"^lpddr2-timings":
- type: object
+ $ref: jedec,lpddr2-timings.yaml
description: |
The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
"lpddr2-timings" provides AC timing parameters of the device for
a given speed-bin. The user may provide the timings for as many
- speed-bins as is required. Please see Documentation/devicetree/
- bindings/memory-controllers/ddr/lpddr2-timings.txt for more information
- on "lpddr2-timings".
+ speed-bins as is required.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
deleted file mode 100644
index 9ceb19e0c7fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
-
-Required properties:
-- compatible : Should be "jedec,lpddr2-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds). Parameters with
-a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
-- tRCD
-- tWR
-- tRAS-min
-- tRRD
-- tWTR
-- tXP
-- tRTP
-- tDQSCK-max
-- tFAW
-- tZQCS
-- tZQinit
-- tRPab
-- tZQCL
-- tCKESR
-- tRAS-max-ns
-- tDQSCK-max-derated
-
-Example:
-
-timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
- compatible = "jedec,lpddr2-timings";
- min-freq = <10000000>;
- max-freq = <400000000>;
- tRPab = <21000>;
- tRCD = <18000>;
- tWR = <15000>;
- tRAS-min = <42000>;
- tRRD = <10000>;
- tWTR = <7500>;
- tXP = <7500>;
- tRTP = <7500>;
- tCKESR = <15000>;
- tDQSCK-max = <5500>;
- tFAW = <50000>;
- tZQCS = <90000>;
- tZQCL = <360000>;
- tZQinit = <1000000>;
- tRAS-max-ns = <70000>;
-};
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 1/8] dt-bindings: memory: lpddr2-timings: convert to dtschema
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Convert the LPDDR2 memory timings bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
---
.../ddr/jedec,lpddr2-timings.yaml | 135 ++++++++++++++++++
.../memory-controllers/ddr/jedec,lpddr2.yaml | 6 +-
.../memory-controllers/ddr/lpddr2-timings.txt | 52 -------
3 files changed, 137 insertions(+), 56 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
new file mode 100644
index 000000000000..f3e62ee07126
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ const: jedec,lpddr2-timings
+
+ max-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Maximum DDR clock frequency for the speed-bin, in Hz.
+
+ min-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Minimum DDR clock frequency for the speed-bin, in Hz.
+
+ tCKESR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ CKE minimum pulse width during SELF REFRESH (low pulse width during
+ SELF REFRESH) in pico seconds.
+
+ tDQSCK-max:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DQS output data access time from CK_t/CK_c in pico seconds.
+
+ tDQSCK-max-derated:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DQS output data access time from CK_t/CK_c, temperature de-rated, in pico
+ seconds.
+
+ tFAW:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Four-bank activate window in pico seconds.
+
+ tRAS-max-ns:
+ description: |
+ Row active time in nano seconds.
+
+ tRAS-min:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row active time in pico seconds.
+
+ tRCD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RAS-to-CAS delay in pico seconds.
+
+ tRPab:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row precharge time (all banks) in pico seconds.
+
+ tRRD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Active bank A to active bank B in pico seconds.
+
+ tRTP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal READ to PRECHARGE command delay in pico seconds.
+
+ tWR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ WRITE recovery time in pico seconds.
+
+ tWTR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal WRITE-to-READ command delay in pico seconds.
+
+ tXP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Exit power-down to next valid command delay in pico seconds.
+
+ tZQCL:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Long calibration time in pico seconds.
+
+ tZQCS:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Short calibration time in pico seconds.
+
+ tZQinit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Initialization calibration time in pico seconds.
+
+required:
+ - compatible
+ - min-freq
+ - max-freq
+
+additionalProperties: false
+
+examples:
+ - |
+ timings {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tRAS-max-ns = <70000>;
+ tRAS-min = <42000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tRRD = <10000>;
+ tRTP = <7500>;
+ tWR = <15000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tZQCL = <360000>;
+ tZQCS = <90000>;
+ tZQinit = <1000000>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
index 25ed0266f6dd..2d8a701e2a05 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -142,14 +142,12 @@ properties:
patternProperties:
"^lpddr2-timings":
- type: object
+ $ref: jedec,lpddr2-timings.yaml
description: |
The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
"lpddr2-timings" provides AC timing parameters of the device for
a given speed-bin. The user may provide the timings for as many
- speed-bins as is required. Please see Documentation/devicetree/
- bindings/memory-controllers/ddr/lpddr2-timings.txt for more information
- on "lpddr2-timings".
+ speed-bins as is required.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
deleted file mode 100644
index 9ceb19e0c7fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
-
-Required properties:
-- compatible : Should be "jedec,lpddr2-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds). Parameters with
-a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
-- tRCD
-- tWR
-- tRAS-min
-- tRRD
-- tWTR
-- tXP
-- tRTP
-- tDQSCK-max
-- tFAW
-- tZQCS
-- tZQinit
-- tRPab
-- tZQCL
-- tCKESR
-- tRAS-max-ns
-- tDQSCK-max-derated
-
-Example:
-
-timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
- compatible = "jedec,lpddr2-timings";
- min-freq = <10000000>;
- max-freq = <400000000>;
- tRPab = <21000>;
- tRCD = <18000>;
- tWR = <15000>;
- tRAS-min = <42000>;
- tRRD = <10000>;
- tWTR = <7500>;
- tXP = <7500>;
- tRTP = <7500>;
- tCKESR = <15000>;
- tDQSCK-max = <5500>;
- tFAW = <50000>;
- tZQCS = <90000>;
- tZQCL = <360000>;
- tZQinit = <1000000>;
- tRAS-max-ns = <70000>;
-};
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 2/8] dt-bindings: memory: lpddr3-timings: convert to dtschema
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Convert the LPDDR3 memory timings bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
---
.../ddr/jedec,lpddr3-timings.yaml | 153 ++++++++++++++++++
.../memory-controllers/ddr/lpddr3-timings.txt | 58 -------
2 files changed, 153 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
new file mode 100644
index 000000000000..98bc219e8a25
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ const: jedec,lpddr3-timings
+
+ reg:
+ maxItems: 1
+ description: |
+ Maximum DDR clock frequency for the speed-bin, in Hz.
+
+ min-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Minimum DDR clock frequency for the speed-bin, in Hz.
+
+ tCKE:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
+
+ tCKESR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ CKE minimum pulse width during SELF REFRESH (low pulse width during
+ SELF REFRESH) in pico seconds.
+
+ tFAW:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Four-bank activate window in pico seconds.
+
+ tMRD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Mode register set command delay in pico seconds.
+
+ tR2R-C2C:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
+
+ tRAS:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row active time in pico seconds.
+
+ tRC:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ ACTIVATE-to-ACTIVATE command period in pico seconds.
+
+ tRCD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RAS-to-CAS delay in pico seconds.
+
+ tRFC:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Refresh Cycle time in pico seconds.
+
+ tRPab:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row precharge time (all banks) in pico seconds.
+
+ tRPpb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row precharge time (single banks) in pico seconds.
+
+ tRRD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Active bank A to active bank B in pico seconds.
+
+ tRTP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal READ to PRECHARGE command delay in pico seconds.
+
+ tW2W-C2C:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
+
+ tWR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ WRITE recovery time in pico seconds.
+
+ tWTR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal WRITE-to-READ command delay in pico seconds.
+
+ tXP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Exit power-down to next valid command delay in pico seconds.
+
+ tXSR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ SELF REFRESH exit to next valid command delay in pico seconds.
+
+required:
+ - compatible
+ - min-freq
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ lpddr3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ timings@800000000 {
+ compatible = "jedec,lpddr3-timings";
+ reg = <800000000>;
+ min-freq = <100000000>;
+ tCKE = <3750>;
+ tCKESR = <3750>;
+ tFAW = <25000>;
+ tMRD = <7000>;
+ tR2R-C2C = <0>;
+ tRAS = <23000>;
+ tRC = <33750>;
+ tRCD = <10000>;
+ tRFC = <65000>;
+ tRPab = <12000>;
+ tRPpb = <12000>;
+ tRRD = <6000>;
+ tRTP = <3750>;
+ tW2W-C2C = <0>;
+ tWR = <7500>;
+ tWTR = <3750>;
+ tXP = <3750>;
+ tXSR = <70000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
deleted file mode 100644
index 84705e50a3fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* AC timing parameters of LPDDR3 memories for a given speed-bin.
-
-The structures are based on LPDDR2 and extended where needed.
-
-Required properties:
-- compatible : Should be "jedec,lpddr3-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds).
-- tRFC
-- tRRD
-- tRPab
-- tRPpb
-- tRCD
-- tRC
-- tRAS
-- tWTR
-- tWR
-- tRTP
-- tW2W-C2C
-- tR2R-C2C
-- tFAW
-- tXSR
-- tXP
-- tCKE
-- tCKESR
-- tMRD
-
-Example:
-
-timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
- compatible = "jedec,lpddr3-timings";
- reg = <800000000>; /* workaround: it shows max-freq */
- min-freq = <100000000>;
- tRFC = <65000>;
- tRRD = <6000>;
- tRPab = <12000>;
- tRPpb = <12000>;
- tRCD = <10000>;
- tRC = <33750>;
- tRAS = <23000>;
- tWTR = <3750>;
- tWR = <7500>;
- tRTP = <3750>;
- tW2W-C2C = <0>;
- tR2R-C2C = <0>;
- tFAW = <25000>;
- tXSR = <70000>;
- tXP = <3750>;
- tCKE = <3750>;
- tCKESR = <3750>;
- tMRD = <7000>;
-};
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 2/8] dt-bindings: memory: lpddr3-timings: convert to dtschema
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Convert the LPDDR3 memory timings bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
---
.../ddr/jedec,lpddr3-timings.yaml | 153 ++++++++++++++++++
.../memory-controllers/ddr/lpddr3-timings.txt | 58 -------
2 files changed, 153 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
new file mode 100644
index 000000000000..98bc219e8a25
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ const: jedec,lpddr3-timings
+
+ reg:
+ maxItems: 1
+ description: |
+ Maximum DDR clock frequency for the speed-bin, in Hz.
+
+ min-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Minimum DDR clock frequency for the speed-bin, in Hz.
+
+ tCKE:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
+
+ tCKESR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ CKE minimum pulse width during SELF REFRESH (low pulse width during
+ SELF REFRESH) in pico seconds.
+
+ tFAW:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Four-bank activate window in pico seconds.
+
+ tMRD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Mode register set command delay in pico seconds.
+
+ tR2R-C2C:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
+
+ tRAS:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row active time in pico seconds.
+
+ tRC:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ ACTIVATE-to-ACTIVATE command period in pico seconds.
+
+ tRCD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RAS-to-CAS delay in pico seconds.
+
+ tRFC:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Refresh Cycle time in pico seconds.
+
+ tRPab:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row precharge time (all banks) in pico seconds.
+
+ tRPpb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Row precharge time (single banks) in pico seconds.
+
+ tRRD:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Active bank A to active bank B in pico seconds.
+
+ tRTP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal READ to PRECHARGE command delay in pico seconds.
+
+ tW2W-C2C:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
+
+ tWR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ WRITE recovery time in pico seconds.
+
+ tWTR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Internal WRITE-to-READ command delay in pico seconds.
+
+ tXP:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Exit power-down to next valid command delay in pico seconds.
+
+ tXSR:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ SELF REFRESH exit to next valid command delay in pico seconds.
+
+required:
+ - compatible
+ - min-freq
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ lpddr3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ timings@800000000 {
+ compatible = "jedec,lpddr3-timings";
+ reg = <800000000>;
+ min-freq = <100000000>;
+ tCKE = <3750>;
+ tCKESR = <3750>;
+ tFAW = <25000>;
+ tMRD = <7000>;
+ tR2R-C2C = <0>;
+ tRAS = <23000>;
+ tRC = <33750>;
+ tRCD = <10000>;
+ tRFC = <65000>;
+ tRPab = <12000>;
+ tRPpb = <12000>;
+ tRRD = <6000>;
+ tRTP = <3750>;
+ tW2W-C2C = <0>;
+ tWR = <7500>;
+ tWTR = <3750>;
+ tXP = <3750>;
+ tXSR = <70000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
deleted file mode 100644
index 84705e50a3fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* AC timing parameters of LPDDR3 memories for a given speed-bin.
-
-The structures are based on LPDDR2 and extended where needed.
-
-Required properties:
-- compatible : Should be "jedec,lpddr3-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds).
-- tRFC
-- tRRD
-- tRPab
-- tRPpb
-- tRCD
-- tRC
-- tRAS
-- tWTR
-- tWR
-- tRTP
-- tW2W-C2C
-- tR2R-C2C
-- tFAW
-- tXSR
-- tXP
-- tCKE
-- tCKESR
-- tMRD
-
-Example:
-
-timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
- compatible = "jedec,lpddr3-timings";
- reg = <800000000>; /* workaround: it shows max-freq */
- min-freq = <100000000>;
- tRFC = <65000>;
- tRRD = <6000>;
- tRPab = <12000>;
- tRPpb = <12000>;
- tRCD = <10000>;
- tRC = <33750>;
- tRAS = <23000>;
- tWTR = <3750>;
- tWR = <7500>;
- tRTP = <3750>;
- tW2W-C2C = <0>;
- tR2R-C2C = <0>;
- tFAW = <25000>;
- tXSR = <70000>;
- tXP = <3750>;
- tCKE = <3750>;
- tCKESR = <3750>;
- tMRD = <7000>;
-};
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 3/8] dt-bindings: memory: lpddr3: convert to dtschema
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Convert the LPDDR3 memory bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../memory-controllers/ddr/jedec,lpddr3.yaml | 265 ++++++++++++++++++
.../memory-controllers/ddr/lpddr3.txt | 107 -------
.../samsung,exynos5422-dmc.yaml | 3 +-
3 files changed, 266 insertions(+), 109 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
new file mode 100644
index 000000000000..e36f3607e25a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -0,0 +1,265 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - samsung,K3QF2F20DB
+ - const: jedec,lpddr3
+
+ '#address-cells':
+ const: 1
+
+ density:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Density in megabits of SDRAM chip.
+ enum:
+ - 4096
+ - 8192
+ - 16384
+ - 32768
+
+ io-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ IO bus width in bits of SDRAM chip.
+ enum:
+ - 64
+ - 32
+ - 16
+ - 8
+
+ manufacturer-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Manufacturer ID value read from Mode Register 5.
+
+ revision-id:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ items:
+ maximum: 255
+ description: |
+ Revision value of SDRAM chip read from Mode Registers 6 and 7.
+
+ '#size-cells':
+ const: 0
+
+ tCKE-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+ of clock cycles.
+
+ tCKESR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ CKE minimum pulse width during SELF REFRESH (low pulse width during
+ SELF REFRESH) in terms of number of clock cycles.
+
+ tDQSCK-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ DQS output data access time from CK_t/CK_c in terms of number of clock
+ cycles.
+
+ tFAW-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 63
+ description: |
+ Four-bank activate window in terms of number of clock cycles.
+
+ tMRD-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Mode register set command delay in terms of number of clock cycles.
+
+ tR2R-C2C-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Additional READ-to-READ delay in chip-to-chip cases in terms of number
+ of clock cycles.
+
+ tRAS-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 63
+ description: |
+ Row active time in terms of number of clock cycles.
+
+ tRC-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 63
+ description: |
+ ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles.
+
+ tRCD-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ RAS-to-CAS delay in terms of number of clock cycles.
+
+ tRFC-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 255
+ description: |
+ Refresh Cycle time in terms of number of clock cycles.
+
+ tRL-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ READ data latency in terms of number of clock cycles.
+
+ tRPab-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Row precharge time (all banks) in terms of number of clock cycles.
+
+ tRPpb-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Row precharge time (single banks) in terms of number of clock cycles.
+
+ tRRD-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Active bank A to active bank B in terms of number of clock cycles.
+
+ tRTP-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Internal READ to PRECHARGE command delay in terms of number of clock
+ cycles.
+
+ tW2W-C2C-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number
+ of clock cycles.
+
+ tWL-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ WRITE data latency in terms of number of clock cycles.
+
+ tWR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ WRITE recovery time in terms of number of clock cycles.
+
+ tWTR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Internal WRITE-to-READ command delay in terms of number of clock cycles.
+
+ tXP-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 255
+ description: |
+ Exit power-down to next valid command delay in terms of number of clock
+ cycles.
+
+ tXSR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 1023
+ description: |
+ SELF REFRESH exit to next valid command delay in terms of number of clock
+ cycles.
+
+patternProperties:
+ "^timings@[0-9a-f]+$":
+ $ref: jedec,lpddr3-timings.yaml
+ description: |
+ The lpddr3 node may have one or more child nodes with timings.
+ Each timing node provides AC timing parameters of the device for a given
+ speed-bin. The user may provide the timings for as many speed-bins as is
+ required.
+
+required:
+ - compatible
+ - '#address-cells'
+ - density
+ - io-width
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ lpddr3 {
+ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+ density = <16384>;
+ io-width = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tCKE-min-tck = <2>;
+ tCKESR-min-tck = <2>;
+ tDQSCK-min-tck = <5>;
+ tFAW-min-tck = <5>;
+ tMRD-min-tck = <5>;
+ tR2R-C2C-min-tck = <0>;
+ tRAS-min-tck = <5>;
+ tRC-min-tck = <6>;
+ tRCD-min-tck = <3>;
+ tRFC-min-tck = <17>;
+ tRL-min-tck = <14>;
+ tRPab-min-tck = <2>;
+ tRPpb-min-tck = <2>;
+ tRRD-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tW2W-C2C-min-tck = <0>;
+ tWL-min-tck = <8>;
+ tWR-min-tck = <7>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tXSR-min-tck = <12>;
+
+ timings@800000000 {
+ compatible = "jedec,lpddr3-timings";
+ reg = <800000000>;
+ min-freq = <100000000>;
+ tCKE = <3750>;
+ tCKESR = <3750>;
+ tFAW = <25000>;
+ tMRD = <7000>;
+ tR2R-C2C = <0>;
+ tRAS = <23000>;
+ tRC = <33750>;
+ tRCD = <10000>;
+ tRFC = <65000>;
+ tRPab = <12000>;
+ tRPpb = <12000>;
+ tRRD = <6000>;
+ tRTP = <3750>;
+ tW2W-C2C = <0>;
+ tWR = <7500>;
+ tWTR = <3750>;
+ tXP = <3750>;
+ tXSR = <70000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
deleted file mode 100644
index 031af5fb0379..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
- Example "<vendor>,<type>" values:
- "samsung,K3QF2F20DB"
-
-- density : <u32> representing density in Mb (Mega bits)
-- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
-- #address-cells: Must be set to 1
-- #size-cells: Must be set to 0
-
-Optional properties:
-
-- manufacturer-id : <u32> Manufacturer ID value read from Mode Register 5
-- revision-id : <u32 u32> Revision IDs read from Mode Registers 6 and 7
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRFC-min-tck
-- tRRD-min-tck
-- tRPab-min-tck
-- tRPpb-min-tck
-- tRCD-min-tck
-- tRC-min-tck
-- tRAS-min-tck
-- tWTR-min-tck
-- tWR-min-tck
-- tRTP-min-tck
-- tW2W-C2C-min-tck
-- tR2R-C2C-min-tck
-- tWL-min-tck
-- tDQSCK-min-tck
-- tRL-min-tck
-- tFAW-min-tck
-- tXSR-min-tck
-- tXP-min-tck
-- tCKE-min-tck
-- tCKESR-min-tck
-- tMRD-min-tck
-
-Child nodes:
-- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
- "lpddr3-timings" provides AC timing parameters of the device for
- a given speed-bin. Please see
- Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
- for more information on "lpddr3-timings"
-
-Example:
-
-samsung_K3QF2F20DB: lpddr3 {
- compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
- density = <16384>;
- io-width = <32>;
- manufacturer-id = <1>;
- revision-id = <123 234>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- tRFC-min-tck = <17>;
- tRRD-min-tck = <2>;
- tRPab-min-tck = <2>;
- tRPpb-min-tck = <2>;
- tRCD-min-tck = <3>;
- tRC-min-tck = <6>;
- tRAS-min-tck = <5>;
- tWTR-min-tck = <2>;
- tWR-min-tck = <7>;
- tRTP-min-tck = <2>;
- tW2W-C2C-min-tck = <0>;
- tR2R-C2C-min-tck = <0>;
- tWL-min-tck = <8>;
- tDQSCK-min-tck = <5>;
- tRL-min-tck = <14>;
- tFAW-min-tck = <5>;
- tXSR-min-tck = <12>;
- tXP-min-tck = <2>;
- tCKE-min-tck = <2>;
- tCKESR-min-tck = <2>;
- tMRD-min-tck = <5>;
-
- timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
- compatible = "jedec,lpddr3-timings";
- /* workaround: 'reg' shows max-freq */
- reg = <800000000>;
- min-freq = <100000000>;
- tRFC = <65000>;
- tRRD = <6000>;
- tRPab = <12000>;
- tRPpb = <12000>;
- tRCD = <10000>;
- tRC = <33750>;
- tRAS = <23000>;
- tWTR = <3750>;
- tWR = <7500>;
- tRTP = <3750>;
- tW2W-C2C = <0>;
- tR2R-C2C = <0>;
- tFAW = <25000>;
- tXSR = <70000>;
- tXP = <3750>;
- tCKE = <3750>;
- tCKESR = <3750>;
- tMRD = <7000>;
- };
-}
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index 895c3b5c9aaa..f152243f6b18 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -53,8 +53,7 @@ properties:
$ref: '/schemas/types.yaml#/definitions/phandle'
description: |
phandle of the connected DRAM memory device. For more information please
- refer to documentation file:
- Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+ refer to jedec,lpddr3.yaml.
operating-points-v2: true
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 3/8] dt-bindings: memory: lpddr3: convert to dtschema
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Convert the LPDDR3 memory bindings to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../memory-controllers/ddr/jedec,lpddr3.yaml | 265 ++++++++++++++++++
.../memory-controllers/ddr/lpddr3.txt | 107 -------
.../samsung,exynos5422-dmc.yaml | 3 +-
3 files changed, 266 insertions(+), 109 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
new file mode 100644
index 000000000000..e36f3607e25a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -0,0 +1,265 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - samsung,K3QF2F20DB
+ - const: jedec,lpddr3
+
+ '#address-cells':
+ const: 1
+
+ density:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Density in megabits of SDRAM chip.
+ enum:
+ - 4096
+ - 8192
+ - 16384
+ - 32768
+
+ io-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ IO bus width in bits of SDRAM chip.
+ enum:
+ - 64
+ - 32
+ - 16
+ - 8
+
+ manufacturer-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Manufacturer ID value read from Mode Register 5.
+
+ revision-id:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ items:
+ maximum: 255
+ description: |
+ Revision value of SDRAM chip read from Mode Registers 6 and 7.
+
+ '#size-cells':
+ const: 0
+
+ tCKE-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+ of clock cycles.
+
+ tCKESR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ CKE minimum pulse width during SELF REFRESH (low pulse width during
+ SELF REFRESH) in terms of number of clock cycles.
+
+ tDQSCK-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ DQS output data access time from CK_t/CK_c in terms of number of clock
+ cycles.
+
+ tFAW-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 63
+ description: |
+ Four-bank activate window in terms of number of clock cycles.
+
+ tMRD-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Mode register set command delay in terms of number of clock cycles.
+
+ tR2R-C2C-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Additional READ-to-READ delay in chip-to-chip cases in terms of number
+ of clock cycles.
+
+ tRAS-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 63
+ description: |
+ Row active time in terms of number of clock cycles.
+
+ tRC-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 63
+ description: |
+ ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles.
+
+ tRCD-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ RAS-to-CAS delay in terms of number of clock cycles.
+
+ tRFC-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 255
+ description: |
+ Refresh Cycle time in terms of number of clock cycles.
+
+ tRL-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ READ data latency in terms of number of clock cycles.
+
+ tRPab-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Row precharge time (all banks) in terms of number of clock cycles.
+
+ tRPpb-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Row precharge time (single banks) in terms of number of clock cycles.
+
+ tRRD-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Active bank A to active bank B in terms of number of clock cycles.
+
+ tRTP-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Internal READ to PRECHARGE command delay in terms of number of clock
+ cycles.
+
+ tW2W-C2C-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number
+ of clock cycles.
+
+ tWL-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ WRITE data latency in terms of number of clock cycles.
+
+ tWR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ WRITE recovery time in terms of number of clock cycles.
+
+ tWTR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+ description: |
+ Internal WRITE-to-READ command delay in terms of number of clock cycles.
+
+ tXP-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 255
+ description: |
+ Exit power-down to next valid command delay in terms of number of clock
+ cycles.
+
+ tXSR-min-tck:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 1023
+ description: |
+ SELF REFRESH exit to next valid command delay in terms of number of clock
+ cycles.
+
+patternProperties:
+ "^timings@[0-9a-f]+$":
+ $ref: jedec,lpddr3-timings.yaml
+ description: |
+ The lpddr3 node may have one or more child nodes with timings.
+ Each timing node provides AC timing parameters of the device for a given
+ speed-bin. The user may provide the timings for as many speed-bins as is
+ required.
+
+required:
+ - compatible
+ - '#address-cells'
+ - density
+ - io-width
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ lpddr3 {
+ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+ density = <16384>;
+ io-width = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tCKE-min-tck = <2>;
+ tCKESR-min-tck = <2>;
+ tDQSCK-min-tck = <5>;
+ tFAW-min-tck = <5>;
+ tMRD-min-tck = <5>;
+ tR2R-C2C-min-tck = <0>;
+ tRAS-min-tck = <5>;
+ tRC-min-tck = <6>;
+ tRCD-min-tck = <3>;
+ tRFC-min-tck = <17>;
+ tRL-min-tck = <14>;
+ tRPab-min-tck = <2>;
+ tRPpb-min-tck = <2>;
+ tRRD-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tW2W-C2C-min-tck = <0>;
+ tWL-min-tck = <8>;
+ tWR-min-tck = <7>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tXSR-min-tck = <12>;
+
+ timings@800000000 {
+ compatible = "jedec,lpddr3-timings";
+ reg = <800000000>;
+ min-freq = <100000000>;
+ tCKE = <3750>;
+ tCKESR = <3750>;
+ tFAW = <25000>;
+ tMRD = <7000>;
+ tR2R-C2C = <0>;
+ tRAS = <23000>;
+ tRC = <33750>;
+ tRCD = <10000>;
+ tRFC = <65000>;
+ tRPab = <12000>;
+ tRPpb = <12000>;
+ tRRD = <6000>;
+ tRTP = <3750>;
+ tW2W-C2C = <0>;
+ tWR = <7500>;
+ tWTR = <3750>;
+ tXP = <3750>;
+ tXSR = <70000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
deleted file mode 100644
index 031af5fb0379..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
- Example "<vendor>,<type>" values:
- "samsung,K3QF2F20DB"
-
-- density : <u32> representing density in Mb (Mega bits)
-- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
-- #address-cells: Must be set to 1
-- #size-cells: Must be set to 0
-
-Optional properties:
-
-- manufacturer-id : <u32> Manufacturer ID value read from Mode Register 5
-- revision-id : <u32 u32> Revision IDs read from Mode Registers 6 and 7
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRFC-min-tck
-- tRRD-min-tck
-- tRPab-min-tck
-- tRPpb-min-tck
-- tRCD-min-tck
-- tRC-min-tck
-- tRAS-min-tck
-- tWTR-min-tck
-- tWR-min-tck
-- tRTP-min-tck
-- tW2W-C2C-min-tck
-- tR2R-C2C-min-tck
-- tWL-min-tck
-- tDQSCK-min-tck
-- tRL-min-tck
-- tFAW-min-tck
-- tXSR-min-tck
-- tXP-min-tck
-- tCKE-min-tck
-- tCKESR-min-tck
-- tMRD-min-tck
-
-Child nodes:
-- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
- "lpddr3-timings" provides AC timing parameters of the device for
- a given speed-bin. Please see
- Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
- for more information on "lpddr3-timings"
-
-Example:
-
-samsung_K3QF2F20DB: lpddr3 {
- compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
- density = <16384>;
- io-width = <32>;
- manufacturer-id = <1>;
- revision-id = <123 234>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- tRFC-min-tck = <17>;
- tRRD-min-tck = <2>;
- tRPab-min-tck = <2>;
- tRPpb-min-tck = <2>;
- tRCD-min-tck = <3>;
- tRC-min-tck = <6>;
- tRAS-min-tck = <5>;
- tWTR-min-tck = <2>;
- tWR-min-tck = <7>;
- tRTP-min-tck = <2>;
- tW2W-C2C-min-tck = <0>;
- tR2R-C2C-min-tck = <0>;
- tWL-min-tck = <8>;
- tDQSCK-min-tck = <5>;
- tRL-min-tck = <14>;
- tFAW-min-tck = <5>;
- tXSR-min-tck = <12>;
- tXP-min-tck = <2>;
- tCKE-min-tck = <2>;
- tCKESR-min-tck = <2>;
- tMRD-min-tck = <5>;
-
- timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
- compatible = "jedec,lpddr3-timings";
- /* workaround: 'reg' shows max-freq */
- reg = <800000000>;
- min-freq = <100000000>;
- tRFC = <65000>;
- tRRD = <6000>;
- tRPab = <12000>;
- tRPpb = <12000>;
- tRCD = <10000>;
- tRC = <33750>;
- tRAS = <23000>;
- tWTR = <3750>;
- tWR = <7500>;
- tRTP = <3750>;
- tW2W-C2C = <0>;
- tR2R-C2C = <0>;
- tFAW = <25000>;
- tXSR = <70000>;
- tXP = <3750>;
- tCKE = <3750>;
- tCKESR = <3750>;
- tMRD = <7000>;
- };
-}
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index 895c3b5c9aaa..f152243f6b18 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -53,8 +53,7 @@ properties:
$ref: '/schemas/types.yaml#/definitions/phandle'
description: |
phandle of the connected DRAM memory device. For more information please
- refer to documentation file:
- Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+ refer to jedec,lpddr3.yaml.
operating-points-v2: true
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 4/8] dt-bindings: memory: lpddr3: adjust IO width to spec
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
According to JEDEC Standard No. 209-3 (table 3.4.1 "Mode Register
Assignment and Definition in LPDDR3 SDRAM"), the LPDDR3 supports only
16- and 32-bit IO width. Drop the unsupported others.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 2 --
1 file changed, 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
index e36f3607e25a..d6787b5190ee 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -34,10 +34,8 @@ properties:
description: |
IO bus width in bits of SDRAM chip.
enum:
- - 64
- 32
- 16
- - 8
manufacturer-id:
$ref: /schemas/types.yaml#/definitions/uint32
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 4/8] dt-bindings: memory: lpddr3: adjust IO width to spec
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
According to JEDEC Standard No. 209-3 (table 3.4.1 "Mode Register
Assignment and Definition in LPDDR3 SDRAM"), the LPDDR3 supports only
16- and 32-bit IO width. Drop the unsupported others.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 2 --
1 file changed, 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
index e36f3607e25a..d6787b5190ee 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -34,10 +34,8 @@ properties:
description: |
IO bus width in bits of SDRAM chip.
enum:
- - 64
- 32
- 16
- - 8
manufacturer-id:
$ref: /schemas/types.yaml#/definitions/uint32
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
The memory manufacturer should be described in vendor part of
compatible, so there is no need to duplicate it in a separate property.
Similarly is done in LPDDR2 bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
index d6787b5190ee..3bcba15098ea 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -40,7 +40,9 @@ properties:
manufacturer-id:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
- Manufacturer ID value read from Mode Register 5.
+ Manufacturer ID value read from Mode Register 5. The property is
+ deprecated, manufacturer should be derived from the compatible.
+ deprecated: true
revision-id:
$ref: /schemas/types.yaml#/definitions/uint32-array
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
The memory manufacturer should be described in vendor part of
compatible, so there is no need to duplicate it in a separate property.
Similarly is done in LPDDR2 bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
index d6787b5190ee..3bcba15098ea 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -40,7 +40,9 @@ properties:
manufacturer-id:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
- Manufacturer ID value read from Mode Register 5.
+ Manufacturer ID value read from Mode Register 5. The property is
+ deprecated, manufacturer should be derived from the compatible.
+ deprecated: true
revision-id:
$ref: /schemas/types.yaml#/definitions/uint32-array
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 6/8] dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
The timings node maximum frequency was passed as an unit address, which
is actually a workaround. Such workaround and unit address are not
needed at all, because the device memory node (parent) can contain
multiple timing nodes without unit addresses but with suffix used for
nodenames, e.g. timings-1.
LPDDR2 bindings already use such version, so unify the LPDDR3 with them.
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../ddr/jedec,lpddr3-timings.yaml | 16 ++++++++++------
.../memory-controllers/ddr/jedec,lpddr3.yaml | 12 +++++-------
2 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
index 98bc219e8a25..97c3e988af5f 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -17,6 +17,13 @@ properties:
maxItems: 1
description: |
Maximum DDR clock frequency for the speed-bin, in Hz.
+ Property is deprecated, use max-freq.
+ deprecated: true
+
+ max-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Maximum DDR clock frequency for the speed-bin, in Hz.
min-freq:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -117,19 +124,16 @@ properties:
required:
- compatible
- min-freq
- - reg
+ - max-freq
additionalProperties: false
examples:
- |
lpddr3 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- timings@800000000 {
+ timings {
compatible = "jedec,lpddr3-timings";
- reg = <800000000>;
+ max-freq = <800000000>;
min-freq = <100000000>;
tCKE = <3750>;
tCKESR = <3750>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
index 3bcba15098ea..c542f32c39fa 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -18,6 +18,7 @@ properties:
'#address-cells':
const: 1
+ deprecated: true
density:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -55,6 +56,7 @@ properties:
'#size-cells':
const: 0
+ deprecated: true
tCKE-min-tck:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -191,7 +193,7 @@ properties:
cycles.
patternProperties:
- "^timings@[0-9a-f]+$":
+ "^timings((-[0-9])+|(@[0-9a-f]+))?$":
$ref: jedec,lpddr3-timings.yaml
description: |
The lpddr3 node may have one or more child nodes with timings.
@@ -201,10 +203,8 @@ patternProperties:
required:
- compatible
- - '#address-cells'
- density
- io-width
- - '#size-cells'
additionalProperties: false
@@ -214,8 +214,6 @@ examples:
compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
density = <16384>;
io-width = <32>;
- #address-cells = <1>;
- #size-cells = <0>;
tCKE-min-tck = <2>;
tCKESR-min-tck = <2>;
@@ -239,9 +237,9 @@ examples:
tXP-min-tck = <2>;
tXSR-min-tck = <12>;
- timings@800000000 {
+ timings {
compatible = "jedec,lpddr3-timings";
- reg = <800000000>;
+ max-freq = <800000000>;
min-freq = <100000000>;
tCKE = <3750>;
tCKESR = <3750>;
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 6/8] dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
The timings node maximum frequency was passed as an unit address, which
is actually a workaround. Such workaround and unit address are not
needed at all, because the device memory node (parent) can contain
multiple timing nodes without unit addresses but with suffix used for
nodenames, e.g. timings-1.
LPDDR2 bindings already use such version, so unify the LPDDR3 with them.
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../ddr/jedec,lpddr3-timings.yaml | 16 ++++++++++------
.../memory-controllers/ddr/jedec,lpddr3.yaml | 12 +++++-------
2 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
index 98bc219e8a25..97c3e988af5f 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -17,6 +17,13 @@ properties:
maxItems: 1
description: |
Maximum DDR clock frequency for the speed-bin, in Hz.
+ Property is deprecated, use max-freq.
+ deprecated: true
+
+ max-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Maximum DDR clock frequency for the speed-bin, in Hz.
min-freq:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -117,19 +124,16 @@ properties:
required:
- compatible
- min-freq
- - reg
+ - max-freq
additionalProperties: false
examples:
- |
lpddr3 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- timings@800000000 {
+ timings {
compatible = "jedec,lpddr3-timings";
- reg = <800000000>;
+ max-freq = <800000000>;
min-freq = <100000000>;
tCKE = <3750>;
tCKESR = <3750>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
index 3bcba15098ea..c542f32c39fa 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -18,6 +18,7 @@ properties:
'#address-cells':
const: 1
+ deprecated: true
density:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -55,6 +56,7 @@ properties:
'#size-cells':
const: 0
+ deprecated: true
tCKE-min-tck:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -191,7 +193,7 @@ properties:
cycles.
patternProperties:
- "^timings@[0-9a-f]+$":
+ "^timings((-[0-9])+|(@[0-9a-f]+))?$":
$ref: jedec,lpddr3-timings.yaml
description: |
The lpddr3 node may have one or more child nodes with timings.
@@ -201,10 +203,8 @@ patternProperties:
required:
- compatible
- - '#address-cells'
- density
- io-width
- - '#size-cells'
additionalProperties: false
@@ -214,8 +214,6 @@ examples:
compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
density = <16384>;
io-width = <32>;
- #address-cells = <1>;
- #size-cells = <0>;
tCKE-min-tck = <2>;
tCKESR-min-tck = <2>;
@@ -239,9 +237,9 @@ examples:
tXP-min-tck = <2>;
tXSR-min-tck = <12>;
- timings@800000000 {
+ timings {
compatible = "jedec,lpddr3-timings";
- reg = <800000000>;
+ max-freq = <800000000>;
min-freq = <100000000>;
tCKE = <3750>;
tCKESR = <3750>;
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 7/8] memory: of: parse max-freq property
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Passing the memory timings maximum frequency as an unit address was
a workaround and instead 'max-freq' is preferred. Look for 'max-freq'
first and then fallback to 'reg'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
drivers/memory/of_memory.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
index b94408954d85..bac5c7f34936 100644
--- a/drivers/memory/of_memory.c
+++ b/drivers/memory/of_memory.c
@@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct device_node *np,
{
int ret;
- /* The 'reg' param required since DT has changed, used as 'max-freq' */
- ret = of_property_read_u32(np, "reg", &tim->max_freq);
+ ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
+ if (ret)
+ /* Deprecated way of passing max-freq as 'reg' */
+ ret = of_property_read_u32(np, "reg", &tim->max_freq);
ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 7/8] memory: of: parse max-freq property
@ 2022-02-06 13:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:58 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Passing the memory timings maximum frequency as an unit address was
a workaround and instead 'max-freq' is preferred. Look for 'max-freq'
first and then fallback to 'reg'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
drivers/memory/of_memory.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
index b94408954d85..bac5c7f34936 100644
--- a/drivers/memory/of_memory.c
+++ b/drivers/memory/of_memory.c
@@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct device_node *np,
{
int ret;
- /* The 'reg' param required since DT has changed, used as 'max-freq' */
- ret = of_property_read_u32(np, "reg", &tim->max_freq);
+ ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
+ if (ret)
+ /* Deprecated way of passing max-freq as 'reg' */
+ ret = of_property_read_u32(np, "reg", &tim->max_freq);
ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-06 13:59 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:59 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Passing maximum frequency of LPDDR3 memory timings as unit address was
deprecated in favor of 'max-freq' property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 2f65dcf6ba73..35818c4cd852 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -333,8 +333,6 @@ samsung_K3QF2F20DB: lpddr3 {
compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
density = <16384>;
io-width = <32>;
- #address-cells = <1>;
- #size-cells = <0>;
tRFC-min-tck = <17>;
tRRD-min-tck = <2>;
@@ -358,10 +356,9 @@ samsung_K3QF2F20DB: lpddr3 {
tCKESR-min-tck = <2>;
tMRD-min-tck = <5>;
- timings_samsung_K3QF2F20DB_800mhz: timings@800000000 {
+ timings_samsung_K3QF2F20DB_800mhz: timings {
compatible = "jedec,lpddr3-timings";
- /* workaround: 'reg' shows max-freq */
- reg = <800000000>;
+ max-freq = <800000000>;
min-freq = <100000000>;
tRFC = <65000>;
tRRD = <6000>;
--
2.32.0
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [PATCH v3 8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
@ 2022-02-06 13:59 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-06 13:59 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
Dmitry Osipenko, linux-kernel, devicetree, linux-pm,
linux-samsung-soc, linux-arm-kernel
Passing maximum frequency of LPDDR3 memory timings as unit address was
deprecated in favor of 'max-freq' property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 2f65dcf6ba73..35818c4cd852 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -333,8 +333,6 @@ samsung_K3QF2F20DB: lpddr3 {
compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
density = <16384>;
io-width = <32>;
- #address-cells = <1>;
- #size-cells = <0>;
tRFC-min-tck = <17>;
tRRD-min-tck = <2>;
@@ -358,10 +356,9 @@ samsung_K3QF2F20DB: lpddr3 {
tCKESR-min-tck = <2>;
tMRD-min-tck = <5>;
- timings_samsung_K3QF2F20DB_800mhz: timings@800000000 {
+ timings_samsung_K3QF2F20DB_800mhz: timings {
compatible = "jedec,lpddr3-timings";
- /* workaround: 'reg' shows max-freq */
- reg = <800000000>;
+ max-freq = <800000000>;
min-freq = <100000000>;
tRFC = <65000>;
tRRD = <6000>;
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH v3 3/8] dt-bindings: memory: lpddr3: convert to dtschema
2022-02-06 13:58 ` Krzysztof Kozlowski
@ 2022-02-06 15:33 ` Dmitry Osipenko
-1 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:58, Krzysztof Kozlowski пишет:
> Convert the LPDDR3 memory bindings to DT schema format.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> .../memory-controllers/ddr/jedec,lpddr3.yaml | 265 ++++++++++++++++++
> .../memory-controllers/ddr/lpddr3.txt | 107 -------
> .../samsung,exynos5422-dmc.yaml | 3 +-
> 3 files changed, 266 insertions(+), 109 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 3/8] dt-bindings: memory: lpddr3: convert to dtschema
@ 2022-02-06 15:33 ` Dmitry Osipenko
0 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:58, Krzysztof Kozlowski пишет:
> Convert the LPDDR3 memory bindings to DT schema format.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> .../memory-controllers/ddr/jedec,lpddr3.yaml | 265 ++++++++++++++++++
> .../memory-controllers/ddr/lpddr3.txt | 107 -------
> .../samsung,exynos5422-dmc.yaml | 3 +-
> 3 files changed, 266 insertions(+), 109 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 6/8] dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
2022-02-06 13:58 ` Krzysztof Kozlowski
@ 2022-02-06 15:33 ` Dmitry Osipenko
-1 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:58, Krzysztof Kozlowski пишет:
> The timings node maximum frequency was passed as an unit address, which
> is actually a workaround. Such workaround and unit address are not
> needed at all, because the device memory node (parent) can contain
> multiple timing nodes without unit addresses but with suffix used for
> nodenames, e.g. timings-1.
>
> LPDDR2 bindings already use such version, so unify the LPDDR3 with them.
>
> Suggested-by: Dmitry Osipenko <digetx@gmail.com>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> .../ddr/jedec,lpddr3-timings.yaml | 16 ++++++++++------
> .../memory-controllers/ddr/jedec,lpddr3.yaml | 12 +++++-------
> 2 files changed, 15 insertions(+), 13 deletions(-)
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 6/8] dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
@ 2022-02-06 15:33 ` Dmitry Osipenko
0 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:58, Krzysztof Kozlowski пишет:
> The timings node maximum frequency was passed as an unit address, which
> is actually a workaround. Such workaround and unit address are not
> needed at all, because the device memory node (parent) can contain
> multiple timing nodes without unit addresses but with suffix used for
> nodenames, e.g. timings-1.
>
> LPDDR2 bindings already use such version, so unify the LPDDR3 with them.
>
> Suggested-by: Dmitry Osipenko <digetx@gmail.com>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> .../ddr/jedec,lpddr3-timings.yaml | 16 ++++++++++------
> .../memory-controllers/ddr/jedec,lpddr3.yaml | 12 +++++-------
> 2 files changed, 15 insertions(+), 13 deletions(-)
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 7/8] memory: of: parse max-freq property
2022-02-06 13:58 ` Krzysztof Kozlowski
@ 2022-02-06 15:33 ` Dmitry Osipenko
-1 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:58, Krzysztof Kozlowski пишет:
> Passing the memory timings maximum frequency as an unit address was
> a workaround and instead 'max-freq' is preferred. Look for 'max-freq'
> first and then fallback to 'reg'.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> drivers/memory/of_memory.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
> index b94408954d85..bac5c7f34936 100644
> --- a/drivers/memory/of_memory.c
> +++ b/drivers/memory/of_memory.c
> @@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct device_node *np,
> {
> int ret;
>
> - /* The 'reg' param required since DT has changed, used as 'max-freq' */
> - ret = of_property_read_u32(np, "reg", &tim->max_freq);
> + ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
> + if (ret)
> + /* Deprecated way of passing max-freq as 'reg' */
> + ret = of_property_read_u32(np, "reg", &tim->max_freq);
> ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
> ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
> ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 7/8] memory: of: parse max-freq property
@ 2022-02-06 15:33 ` Dmitry Osipenko
0 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:33 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:58, Krzysztof Kozlowski пишет:
> Passing the memory timings maximum frequency as an unit address was
> a workaround and instead 'max-freq' is preferred. Look for 'max-freq'
> first and then fallback to 'reg'.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> drivers/memory/of_memory.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
> index b94408954d85..bac5c7f34936 100644
> --- a/drivers/memory/of_memory.c
> +++ b/drivers/memory/of_memory.c
> @@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct device_node *np,
> {
> int ret;
>
> - /* The 'reg' param required since DT has changed, used as 'max-freq' */
> - ret = of_property_read_u32(np, "reg", &tim->max_freq);
> + ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
> + if (ret)
> + /* Deprecated way of passing max-freq as 'reg' */
> + ret = of_property_read_u32(np, "reg", &tim->max_freq);
> ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
> ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
> ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
2022-02-06 13:59 ` Krzysztof Kozlowski
@ 2022-02-06 15:35 ` Dmitry Osipenko
-1 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:35 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:59, Krzysztof Kozlowski пишет:
> Passing maximum frequency of LPDDR3 memory timings as unit address was
> deprecated in favor of 'max-freq' property.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> index 2f65dcf6ba73..35818c4cd852 100644
> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> @@ -333,8 +333,6 @@ samsung_K3QF2F20DB: lpddr3 {
> compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
> density = <16384>;
> io-width = <32>;
> - #address-cells = <1>;
> - #size-cells = <0>;
>
> tRFC-min-tck = <17>;
> tRRD-min-tck = <2>;
> @@ -358,10 +356,9 @@ samsung_K3QF2F20DB: lpddr3 {
> tCKESR-min-tck = <2>;
> tMRD-min-tck = <5>;
>
> - timings_samsung_K3QF2F20DB_800mhz: timings@800000000 {
> + timings_samsung_K3QF2F20DB_800mhz: timings {
> compatible = "jedec,lpddr3-timings";
> - /* workaround: 'reg' shows max-freq */
> - reg = <800000000>;
> + max-freq = <800000000>;
> min-freq = <100000000>;
> tRFC = <65000>;
> tRRD = <6000>;
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
@ 2022-02-06 15:35 ` Dmitry Osipenko
0 siblings, 0 replies; 40+ messages in thread
From: Dmitry Osipenko @ 2022-02-06 15:35 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Lukasz Luba, Alim Akhtar,
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
06.02.2022 16:59, Krzysztof Kozlowski пишет:
> Passing maximum frequency of LPDDR3 memory timings as unit address was
> deprecated in favor of 'max-freq' property.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> index 2f65dcf6ba73..35818c4cd852 100644
> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> @@ -333,8 +333,6 @@ samsung_K3QF2F20DB: lpddr3 {
> compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
> density = <16384>;
> io-width = <32>;
> - #address-cells = <1>;
> - #size-cells = <0>;
>
> tRFC-min-tck = <17>;
> tRRD-min-tck = <2>;
> @@ -358,10 +356,9 @@ samsung_K3QF2F20DB: lpddr3 {
> tCKESR-min-tck = <2>;
> tMRD-min-tck = <5>;
>
> - timings_samsung_K3QF2F20DB_800mhz: timings@800000000 {
> + timings_samsung_K3QF2F20DB_800mhz: timings {
> compatible = "jedec,lpddr3-timings";
> - /* workaround: 'reg' shows max-freq */
> - reg = <800000000>;
> + max-freq = <800000000>;
> min-freq = <100000000>;
> tRFC = <65000>;
> tRRD = <6000>;
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
2022-02-06 13:58 ` Krzysztof Kozlowski
@ 2022-02-07 4:14 ` Alim Akhtar
-1 siblings, 0 replies; 40+ messages in thread
From: Alim Akhtar @ 2022-02-07 4:14 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Rob Herring',
'Lukasz Luba', 'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
Hi Krzysztof
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Sunday, February 6, 2022 7:28 PM
>To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob Herring
><robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim Akhtar
><alim.akhtar@samsung.com>; Dmitry Osipenko <digetx@gmail.com>; linux-
>kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>kernel@lists.infradead.org
>Subject: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>manufacturer ID
>
>The memory manufacturer should be described in vendor part of compatible,
>so there is no need to duplicate it in a separate property.
>Similarly is done in LPDDR2 bindings.
>
>Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>---
> .../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
>diff --git a/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpddr3.yaml
>b/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpddr3.yaml
>index d6787b5190ee..3bcba15098ea 100644
>--- a/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpddr3.yaml
>+++ b/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpd
>+++ dr3.yaml
>@@ -40,7 +40,9 @@ properties:
> manufacturer-id:
> $ref: /schemas/types.yaml#/definitions/uint32
> description: |
>- Manufacturer ID value read from Mode Register 5.
>+ Manufacturer ID value read from Mode Register 5. The property is
>+ deprecated, manufacturer should be derived from the compatible.
>+ deprecated: true
>
Shouldn't it be the other way? As DT describes hardware and MR5 does contain
the Manufacturer ID,
so getting Manufacturer ID from MR5 makes aligned to hardware description.
> revision-id:
> $ref: /schemas/types.yaml#/definitions/uint32-array
>--
>2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
@ 2022-02-07 4:14 ` Alim Akhtar
0 siblings, 0 replies; 40+ messages in thread
From: Alim Akhtar @ 2022-02-07 4:14 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Rob Herring',
'Lukasz Luba', 'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
Hi Krzysztof
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Sunday, February 6, 2022 7:28 PM
>To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob Herring
><robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim Akhtar
><alim.akhtar@samsung.com>; Dmitry Osipenko <digetx@gmail.com>; linux-
>kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>kernel@lists.infradead.org
>Subject: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>manufacturer ID
>
>The memory manufacturer should be described in vendor part of compatible,
>so there is no need to duplicate it in a separate property.
>Similarly is done in LPDDR2 bindings.
>
>Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>---
> .../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
>diff --git a/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpddr3.yaml
>b/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpddr3.yaml
>index d6787b5190ee..3bcba15098ea 100644
>--- a/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpddr3.yaml
>+++ b/Documentation/devicetree/bindings/memory-
>controllers/ddr/jedec,lpd
>+++ dr3.yaml
>@@ -40,7 +40,9 @@ properties:
> manufacturer-id:
> $ref: /schemas/types.yaml#/definitions/uint32
> description: |
>- Manufacturer ID value read from Mode Register 5.
>+ Manufacturer ID value read from Mode Register 5. The property is
>+ deprecated, manufacturer should be derived from the compatible.
>+ deprecated: true
>
Shouldn't it be the other way? As DT describes hardware and MR5 does contain
the Manufacturer ID,
so getting Manufacturer ID from MR5 makes aligned to hardware description.
> revision-id:
> $ref: /schemas/types.yaml#/definitions/uint32-array
>--
>2.32.0
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [PATCH v3 7/8] memory: of: parse max-freq property
2022-02-06 13:58 ` Krzysztof Kozlowski
@ 2022-02-07 4:16 ` Alim Akhtar
-1 siblings, 0 replies; 40+ messages in thread
From: Alim Akhtar @ 2022-02-07 4:16 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Rob Herring',
'Lukasz Luba', 'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
Hi Krzysztof
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Sunday, February 6, 2022 7:28 PM
>To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob Herring
><robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim Akhtar
><alim.akhtar@samsung.com>; Dmitry Osipenko <digetx@gmail.com>; linux-
>kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>kernel@lists.infradead.org
>Subject: [PATCH v3 7/8] memory: of: parse max-freq property
>
>Passing the memory timings maximum frequency as an unit address was a
>workaround and instead 'max-freq' is preferred. Look for 'max-freq'
>first and then fallback to 'reg'.
>
>Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>---
Reviewed-by: Alim Akhtar <alim.ahtar@samsung.com>
> drivers/memory/of_memory.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
>index b94408954d85..bac5c7f34936 100644
>--- a/drivers/memory/of_memory.c
>+++ b/drivers/memory/of_memory.c
>@@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct
>device_node *np, {
> int ret;
>
>- /* The 'reg' param required since DT has changed, used as 'max-freq'
>*/
>- ret = of_property_read_u32(np, "reg", &tim->max_freq);
>+ ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
>+ if (ret)
>+ /* Deprecated way of passing max-freq as 'reg' */
>+ ret = of_property_read_u32(np, "reg", &tim->max_freq);
> ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
> ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
> ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
>--
>2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [PATCH v3 7/8] memory: of: parse max-freq property
@ 2022-02-07 4:16 ` Alim Akhtar
0 siblings, 0 replies; 40+ messages in thread
From: Alim Akhtar @ 2022-02-07 4:16 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Rob Herring',
'Lukasz Luba', 'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
Hi Krzysztof
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Sunday, February 6, 2022 7:28 PM
>To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob Herring
><robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim Akhtar
><alim.akhtar@samsung.com>; Dmitry Osipenko <digetx@gmail.com>; linux-
>kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>kernel@lists.infradead.org
>Subject: [PATCH v3 7/8] memory: of: parse max-freq property
>
>Passing the memory timings maximum frequency as an unit address was a
>workaround and instead 'max-freq' is preferred. Look for 'max-freq'
>first and then fallback to 'reg'.
>
>Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>---
Reviewed-by: Alim Akhtar <alim.ahtar@samsung.com>
> drivers/memory/of_memory.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c
>index b94408954d85..bac5c7f34936 100644
>--- a/drivers/memory/of_memory.c
>+++ b/drivers/memory/of_memory.c
>@@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct
>device_node *np, {
> int ret;
>
>- /* The 'reg' param required since DT has changed, used as 'max-freq'
>*/
>- ret = of_property_read_u32(np, "reg", &tim->max_freq);
>+ ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
>+ if (ret)
>+ /* Deprecated way of passing max-freq as 'reg' */
>+ ret = of_property_read_u32(np, "reg", &tim->max_freq);
> ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
> ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
> ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
>--
>2.32.0
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
2022-02-07 4:14 ` Alim Akhtar
@ 2022-02-07 8:56 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-07 8:56 UTC (permalink / raw)
To: Alim Akhtar, 'Rob Herring', 'Lukasz Luba',
'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
On 07/02/2022 05:14, Alim Akhtar wrote:
> Hi Krzysztof
>
>> -----Original Message-----
>> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>> Sent: Sunday, February 6, 2022 7:28 PM
>> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob Herring
>> <robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim Akhtar
>> <alim.akhtar@samsung.com>; Dmitry Osipenko <digetx@gmail.com>; linux-
>> kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>> pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>> kernel@lists.infradead.org
>> Subject: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>> manufacturer ID
>>
>> The memory manufacturer should be described in vendor part of compatible,
>> so there is no need to duplicate it in a separate property.
>> Similarly is done in LPDDR2 bindings.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>> ---
>> .../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpddr3.yaml
>> b/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpddr3.yaml
>> index d6787b5190ee..3bcba15098ea 100644
>> --- a/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpddr3.yaml
>> +++ b/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpd
>> +++ dr3.yaml
>> @@ -40,7 +40,9 @@ properties:
>> manufacturer-id:
>> $ref: /schemas/types.yaml#/definitions/uint32
>> description: |
>> - Manufacturer ID value read from Mode Register 5.
>> + Manufacturer ID value read from Mode Register 5. The property is
>> + deprecated, manufacturer should be derived from the compatible.
>> + deprecated: true
>>
>
> Shouldn't it be the other way? As DT describes hardware and MR5 does contain
> the Manufacturer ID,
> so getting Manufacturer ID from MR5 makes aligned to hardware description.
The code/driver can read MR5 and report it to user-space in case for
example we have a device compatible with different vendor and same
compatible is used. So compatible is re-used but we want real
manufacturer ID from the hardware.
But storing a fixed MR5 value in DT does not fit here. If someone takes
effort to encode manufacturer ID in the DTS, then he/she should take
effort to actually document the compatible.
Basically having MR5 in DT is equal to having a compatible in DTS. I
prefer the latter - simpler, less properties, using existing property
from DT spec instead of custom one.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
@ 2022-02-07 8:56 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-07 8:56 UTC (permalink / raw)
To: Alim Akhtar, 'Rob Herring', 'Lukasz Luba',
'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
On 07/02/2022 05:14, Alim Akhtar wrote:
> Hi Krzysztof
>
>> -----Original Message-----
>> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>> Sent: Sunday, February 6, 2022 7:28 PM
>> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob Herring
>> <robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim Akhtar
>> <alim.akhtar@samsung.com>; Dmitry Osipenko <digetx@gmail.com>; linux-
>> kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>> pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>> kernel@lists.infradead.org
>> Subject: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>> manufacturer ID
>>
>> The memory manufacturer should be described in vendor part of compatible,
>> so there is no need to duplicate it in a separate property.
>> Similarly is done in LPDDR2 bindings.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>> ---
>> .../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpddr3.yaml
>> b/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpddr3.yaml
>> index d6787b5190ee..3bcba15098ea 100644
>> --- a/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpddr3.yaml
>> +++ b/Documentation/devicetree/bindings/memory-
>> controllers/ddr/jedec,lpd
>> +++ dr3.yaml
>> @@ -40,7 +40,9 @@ properties:
>> manufacturer-id:
>> $ref: /schemas/types.yaml#/definitions/uint32
>> description: |
>> - Manufacturer ID value read from Mode Register 5.
>> + Manufacturer ID value read from Mode Register 5. The property is
>> + deprecated, manufacturer should be derived from the compatible.
>> + deprecated: true
>>
>
> Shouldn't it be the other way? As DT describes hardware and MR5 does contain
> the Manufacturer ID,
> so getting Manufacturer ID from MR5 makes aligned to hardware description.
The code/driver can read MR5 and report it to user-space in case for
example we have a device compatible with different vendor and same
compatible is used. So compatible is re-used but we want real
manufacturer ID from the hardware.
But storing a fixed MR5 value in DT does not fit here. If someone takes
effort to encode manufacturer ID in the DTS, then he/she should take
effort to actually document the compatible.
Basically having MR5 in DT is equal to having a compatible in DTS. I
prefer the latter - simpler, less properties, using existing property
from DT spec instead of custom one.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
2022-02-07 8:56 ` Krzysztof Kozlowski
@ 2022-02-07 11:24 ` Alim Akhtar
-1 siblings, 0 replies; 40+ messages in thread
From: Alim Akhtar @ 2022-02-07 11:24 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Rob Herring',
'Lukasz Luba', 'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Monday, February 7, 2022 2:27 PM
>To: Alim Akhtar <alim.akhtar@samsung.com>; 'Rob Herring'
><robh+dt@kernel.org>; 'Lukasz Luba' <lukasz.luba@arm.com>; 'Dmitry
>Osipenko' <digetx@gmail.com>; linux-kernel@vger.kernel.org;
>devicetree@vger.kernel.org; linux-pm@vger.kernel.org; linux-samsung-
>soc@vger.kernel.org; linux-arm-kernel@lists.infradead.org
>Subject: Re: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>manufacturer ID
>
>On 07/02/2022 05:14, Alim Akhtar wrote:
>> Hi Krzysztof
>>
>>> -----Original Message-----
>>> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>>> Sent: Sunday, February 6, 2022 7:28 PM
>>> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob
>>> Herring <robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim
>>> Akhtar <alim.akhtar@samsung.com>; Dmitry Osipenko
><digetx@gmail.com>;
>>> linux- kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>>> pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>>> kernel@lists.infradead.org
>>> Subject: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>>> manufacturer ID
>>>
>>> The memory manufacturer should be described in vendor part of
>>> compatible, so there is no need to duplicate it in a separate property.
>>> Similarly is done in LPDDR2 bindings.
>>>
>>> Signed-off-by: Krzysztof Kozlowski
>>> <krzysztof.kozlowski@canonical.com>
>>> ---
>>> .../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
>>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpddr3.yaml
>>> b/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpddr3.yaml
>>> index d6787b5190ee..3bcba15098ea 100644
>>> --- a/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpddr3.yaml
>>> +++ b/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpd
>>> +++ dr3.yaml
>>> @@ -40,7 +40,9 @@ properties:
>>> manufacturer-id:
>>> $ref: /schemas/types.yaml#/definitions/uint32
>>> description: |
>>> - Manufacturer ID value read from Mode Register 5.
>>> + Manufacturer ID value read from Mode Register 5. The property is
>>> + deprecated, manufacturer should be derived from the compatible.
>>> + deprecated: true
>>>
>>
>> Shouldn't it be the other way? As DT describes hardware and MR5 does
>> contain the Manufacturer ID, so getting Manufacturer ID from MR5 makes
>> aligned to hardware description.
>
>The code/driver can read MR5 and report it to user-space in case for example
>we have a device compatible with different vendor and same compatible is
>used. So compatible is re-used but we want real manufacturer ID from the
>hardware.
>
>But storing a fixed MR5 value in DT does not fit here. If someone takes effort
>to encode manufacturer ID in the DTS, then he/she should take effort to
>actually document the compatible.
>
>Basically having MR5 in DT is equal to having a compatible in DTS. I prefer the
>latter - simpler, less properties, using existing property from DT spec instead
>of custom one.
>
Ok, so there are two part of it, first one to get the compatible and bind the device
and second one to get the manufacturer ID from MR5 for say user application.
Second one can still be handled at driver side, so
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
>Best regards,
>Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
@ 2022-02-07 11:24 ` Alim Akhtar
0 siblings, 0 replies; 40+ messages in thread
From: Alim Akhtar @ 2022-02-07 11:24 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Rob Herring',
'Lukasz Luba', 'Dmitry Osipenko',
linux-kernel, devicetree, linux-pm, linux-samsung-soc,
linux-arm-kernel
>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>Sent: Monday, February 7, 2022 2:27 PM
>To: Alim Akhtar <alim.akhtar@samsung.com>; 'Rob Herring'
><robh+dt@kernel.org>; 'Lukasz Luba' <lukasz.luba@arm.com>; 'Dmitry
>Osipenko' <digetx@gmail.com>; linux-kernel@vger.kernel.org;
>devicetree@vger.kernel.org; linux-pm@vger.kernel.org; linux-samsung-
>soc@vger.kernel.org; linux-arm-kernel@lists.infradead.org
>Subject: Re: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>manufacturer ID
>
>On 07/02/2022 05:14, Alim Akhtar wrote:
>> Hi Krzysztof
>>
>>> -----Original Message-----
>>> From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@canonical.com]
>>> Sent: Sunday, February 6, 2022 7:28 PM
>>> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>; Rob
>>> Herring <robh+dt@kernel.org>; Lukasz Luba <lukasz.luba@arm.com>; Alim
>>> Akhtar <alim.akhtar@samsung.com>; Dmitry Osipenko
><digetx@gmail.com>;
>>> linux- kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
>>> pm@vger.kernel.org; linux-samsung-soc@vger.kernel.org; linux-arm-
>>> kernel@lists.infradead.org
>>> Subject: [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate
>>> manufacturer ID
>>>
>>> The memory manufacturer should be described in vendor part of
>>> compatible, so there is no need to duplicate it in a separate property.
>>> Similarly is done in LPDDR2 bindings.
>>>
>>> Signed-off-by: Krzysztof Kozlowski
>>> <krzysztof.kozlowski@canonical.com>
>>> ---
>>> .../bindings/memory-controllers/ddr/jedec,lpddr3.yaml | 4 +++-
>>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpddr3.yaml
>>> b/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpddr3.yaml
>>> index d6787b5190ee..3bcba15098ea 100644
>>> --- a/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpddr3.yaml
>>> +++ b/Documentation/devicetree/bindings/memory-
>>> controllers/ddr/jedec,lpd
>>> +++ dr3.yaml
>>> @@ -40,7 +40,9 @@ properties:
>>> manufacturer-id:
>>> $ref: /schemas/types.yaml#/definitions/uint32
>>> description: |
>>> - Manufacturer ID value read from Mode Register 5.
>>> + Manufacturer ID value read from Mode Register 5. The property is
>>> + deprecated, manufacturer should be derived from the compatible.
>>> + deprecated: true
>>>
>>
>> Shouldn't it be the other way? As DT describes hardware and MR5 does
>> contain the Manufacturer ID, so getting Manufacturer ID from MR5 makes
>> aligned to hardware description.
>
>The code/driver can read MR5 and report it to user-space in case for example
>we have a device compatible with different vendor and same compatible is
>used. So compatible is re-used but we want real manufacturer ID from the
>hardware.
>
>But storing a fixed MR5 value in DT does not fit here. If someone takes effort
>to encode manufacturer ID in the DTS, then he/she should take effort to
>actually document the compatible.
>
>Basically having MR5 in DT is equal to having a compatible in DTS. I prefer the
>latter - simpler, less properties, using existing property from DT spec instead
>of custom one.
>
Ok, so there are two part of it, first one to get the compatible and bind the device
and second one to get the manufacturer ID from MR5 for say user application.
Second one can still be handled at driver side, so
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
>Best regards,
>Krzysztof
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/8] dt-bindings: memory: convert to dtschema
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-07 21:57 ` Rob Herring
-1 siblings, 0 replies; 40+ messages in thread
From: Rob Herring @ 2022-02-07 21:57 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Lukasz Luba, Alim Akhtar, Dmitry Osipenko, linux-kernel,
devicetree, linux-pm, linux-samsung-soc, linux-arm-kernel
On Sun, Feb 06, 2022 at 02:57:59PM +0100, Krzysztof Kozlowski wrote:
> Hi,
>
> Changes since v2:
> 1. Re-order patches so timings get converted earlier. This fixes dt-checker
> robot report.
> 2. Add Dmitry's review tag.
> 3. Three new patches:
> #6: dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
> #7: memory: of: parse max-freq property
> #8: ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
>
> Changes since v1:
> 1. Drop patch 1 (ARM dts) - applied.
> 2. Correct description in lpddr2-timings (Dmitry).
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (8):
> dt-bindings: memory: lpddr2-timings: convert to dtschema
> dt-bindings: memory: lpddr3-timings: convert to dtschema
> dt-bindings: memory: lpddr3: convert to dtschema
> dt-bindings: memory: lpddr3: adjust IO width to spec
> dt-bindings: memory: lpddr3: deprecate manufacturer ID
> dt-bindings: memory: lpddr3: deprecate passing timings frequency as
> unit address
> memory: of: parse max-freq property
> ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on
> Odroid
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/8] dt-bindings: memory: convert to dtschema
@ 2022-02-07 21:57 ` Rob Herring
0 siblings, 0 replies; 40+ messages in thread
From: Rob Herring @ 2022-02-07 21:57 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Lukasz Luba, Alim Akhtar, Dmitry Osipenko, linux-kernel,
devicetree, linux-pm, linux-samsung-soc, linux-arm-kernel
On Sun, Feb 06, 2022 at 02:57:59PM +0100, Krzysztof Kozlowski wrote:
> Hi,
>
> Changes since v2:
> 1. Re-order patches so timings get converted earlier. This fixes dt-checker
> robot report.
> 2. Add Dmitry's review tag.
> 3. Three new patches:
> #6: dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
> #7: memory: of: parse max-freq property
> #8: ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
>
> Changes since v1:
> 1. Drop patch 1 (ARM dts) - applied.
> 2. Correct description in lpddr2-timings (Dmitry).
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (8):
> dt-bindings: memory: lpddr2-timings: convert to dtschema
> dt-bindings: memory: lpddr3-timings: convert to dtschema
> dt-bindings: memory: lpddr3: convert to dtschema
> dt-bindings: memory: lpddr3: adjust IO width to spec
> dt-bindings: memory: lpddr3: deprecate manufacturer ID
> dt-bindings: memory: lpddr3: deprecate passing timings frequency as
> unit address
> memory: of: parse max-freq property
> ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on
> Odroid
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/8] dt-bindings: memory: convert to dtschema
2022-02-06 13:57 ` Krzysztof Kozlowski
@ 2022-02-09 14:36 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-09 14:36 UTC (permalink / raw)
To: Dmitry Osipenko, Lukasz Luba, Krzysztof Kozlowski, linux-pm,
Alim Akhtar, devicetree, linux-samsung-soc, Rob Herring,
linux-kernel, linux-arm-kernel
On Sun, 6 Feb 2022 14:57:59 +0100, Krzysztof Kozlowski wrote:
> Changes since v2:
> 1. Re-order patches so timings get converted earlier. This fixes dt-checker
> robot report.
> 2. Add Dmitry's review tag.
> 3. Three new patches:
> #6: dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
> #7: memory: of: parse max-freq property
> #8: ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
>
> [...]
Applied, thanks!
[1/8] dt-bindings: memory: lpddr2-timings: convert to dtschema
commit: 425fd283e4a2b929a88483525fda3f90dde8a2d0
[2/8] dt-bindings: memory: lpddr3-timings: convert to dtschema
commit: 180a276c99bb861742c5c423d679b0277d4b1c26
[3/8] dt-bindings: memory: lpddr3: convert to dtschema
commit: 28f818580e49a97876de5c33231fc0e4c3cde2d9
[4/8] dt-bindings: memory: lpddr3: adjust IO width to spec
commit: d98e72b6f9b078c57f9d46dc64a669d02ff2ffcc
[5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
commit: e531932c7185b86eccb3688002730950d49eba1a
[6/8] dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
commit: 42f94bb962cd1b15dc57c90aca7e48848ca6c6c3
[7/8] memory: of: parse max-freq property
commit: 4e890b2228fd14fa6269175e9816bf27ff989e84
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 0/8] dt-bindings: memory: convert to dtschema
@ 2022-02-09 14:36 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-02-09 14:36 UTC (permalink / raw)
To: Dmitry Osipenko, Lukasz Luba, Krzysztof Kozlowski, linux-pm,
Alim Akhtar, devicetree, linux-samsung-soc, Rob Herring,
linux-kernel, linux-arm-kernel
On Sun, 6 Feb 2022 14:57:59 +0100, Krzysztof Kozlowski wrote:
> Changes since v2:
> 1. Re-order patches so timings get converted earlier. This fixes dt-checker
> robot report.
> 2. Add Dmitry's review tag.
> 3. Three new patches:
> #6: dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
> #7: memory: of: parse max-freq property
> #8: ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
>
> [...]
Applied, thanks!
[1/8] dt-bindings: memory: lpddr2-timings: convert to dtschema
commit: 425fd283e4a2b929a88483525fda3f90dde8a2d0
[2/8] dt-bindings: memory: lpddr3-timings: convert to dtschema
commit: 180a276c99bb861742c5c423d679b0277d4b1c26
[3/8] dt-bindings: memory: lpddr3: convert to dtschema
commit: 28f818580e49a97876de5c33231fc0e4c3cde2d9
[4/8] dt-bindings: memory: lpddr3: adjust IO width to spec
commit: d98e72b6f9b078c57f9d46dc64a669d02ff2ffcc
[5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID
commit: e531932c7185b86eccb3688002730950d49eba1a
[6/8] dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address
commit: 42f94bb962cd1b15dc57c90aca7e48848ca6c6c3
[7/8] memory: of: parse max-freq property
commit: 4e890b2228fd14fa6269175e9816bf27ff989e84
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: (subset) [PATCH v3 8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
2022-02-06 13:59 ` Krzysztof Kozlowski
@ 2022-04-04 17:02 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-04 17:02 UTC (permalink / raw)
To: Dmitry Osipenko, linux-samsung-soc, linux-pm, Alim Akhtar,
devicetree, linux-kernel, Lukasz Luba, Krzysztof Kozlowski,
linux-arm-kernel, Rob Herring
Cc: Krzysztof Kozlowski
On Sun, 6 Feb 2022 14:59:18 +0100, Krzysztof Kozlowski wrote:
> Passing maximum frequency of LPDDR3 memory timings as unit address was
> deprecated in favor of 'max-freq' property.
>
>
Applied, thanks!
[8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
commit: c3d3727c8531ba78fc725995ce34cf948ebf1dae
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: (subset) [PATCH v3 8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
@ 2022-04-04 17:02 ` Krzysztof Kozlowski
0 siblings, 0 replies; 40+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-04 17:02 UTC (permalink / raw)
To: Dmitry Osipenko, linux-samsung-soc, linux-pm, Alim Akhtar,
devicetree, linux-kernel, Lukasz Luba, Krzysztof Kozlowski,
linux-arm-kernel, Rob Herring
Cc: Krzysztof Kozlowski
On Sun, 6 Feb 2022 14:59:18 +0100, Krzysztof Kozlowski wrote:
> Passing maximum frequency of LPDDR3 memory timings as unit address was
> deprecated in favor of 'max-freq' property.
>
>
Applied, thanks!
[8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid
commit: c3d3727c8531ba78fc725995ce34cf948ebf1dae
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2022-04-04 22:08 UTC | newest]
Thread overview: 40+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-06 13:57 [PATCH v3 0/8] dt-bindings: memory: convert to dtschema Krzysztof Kozlowski
2022-02-06 13:57 ` Krzysztof Kozlowski
2022-02-06 13:58 ` [PATCH v3 1/8] dt-bindings: memory: lpddr2-timings: " Krzysztof Kozlowski
2022-02-06 13:58 ` Krzysztof Kozlowski
2022-02-06 13:58 ` [PATCH v3 2/8] dt-bindings: memory: lpddr3-timings: " Krzysztof Kozlowski
2022-02-06 13:58 ` Krzysztof Kozlowski
2022-02-06 13:58 ` [PATCH v3 3/8] dt-bindings: memory: lpddr3: " Krzysztof Kozlowski
2022-02-06 13:58 ` Krzysztof Kozlowski
2022-02-06 15:33 ` Dmitry Osipenko
2022-02-06 15:33 ` Dmitry Osipenko
2022-02-06 13:58 ` [PATCH v3 4/8] dt-bindings: memory: lpddr3: adjust IO width to spec Krzysztof Kozlowski
2022-02-06 13:58 ` Krzysztof Kozlowski
2022-02-06 13:58 ` [PATCH v3 5/8] dt-bindings: memory: lpddr3: deprecate manufacturer ID Krzysztof Kozlowski
2022-02-06 13:58 ` Krzysztof Kozlowski
2022-02-07 4:14 ` Alim Akhtar
2022-02-07 4:14 ` Alim Akhtar
2022-02-07 8:56 ` Krzysztof Kozlowski
2022-02-07 8:56 ` Krzysztof Kozlowski
2022-02-07 11:24 ` Alim Akhtar
2022-02-07 11:24 ` Alim Akhtar
2022-02-06 13:58 ` [PATCH v3 6/8] dt-bindings: memory: lpddr3: deprecate passing timings frequency as unit address Krzysztof Kozlowski
2022-02-06 13:58 ` Krzysztof Kozlowski
2022-02-06 15:33 ` Dmitry Osipenko
2022-02-06 15:33 ` Dmitry Osipenko
2022-02-06 13:58 ` [PATCH v3 7/8] memory: of: parse max-freq property Krzysztof Kozlowski
2022-02-06 13:58 ` Krzysztof Kozlowski
2022-02-06 15:33 ` Dmitry Osipenko
2022-02-06 15:33 ` Dmitry Osipenko
2022-02-07 4:16 ` Alim Akhtar
2022-02-07 4:16 ` Alim Akhtar
2022-02-06 13:59 ` [PATCH v3 8/8] ARM: dts: exynos: remove deprecated unit address for LPDDR3 timings on Odroid Krzysztof Kozlowski
2022-02-06 13:59 ` Krzysztof Kozlowski
2022-02-06 15:35 ` Dmitry Osipenko
2022-02-06 15:35 ` Dmitry Osipenko
2022-04-04 17:02 ` (subset) " Krzysztof Kozlowski
2022-04-04 17:02 ` Krzysztof Kozlowski
2022-02-07 21:57 ` [PATCH v3 0/8] dt-bindings: memory: convert to dtschema Rob Herring
2022-02-07 21:57 ` Rob Herring
2022-02-09 14:36 ` Krzysztof Kozlowski
2022-02-09 14:36 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.