[PATCH 5.10 000/116] 5.10.101-rc1 review

[PATCH 5.10 000/116] 5.10.101-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.101 release.
There are 116 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.101-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.101-rc1

Vijayanand Jitta <quic_vjitta@quicinc.com>
    iommu: Fix potential use-after-free during probe

Song Liu <song@kernel.org>
    perf: Fix list corruption in perf_cgroup_switch()

Alexander Stein <alexander.stein@ew.tq-group.com>
    arm64: dts: imx8mq: fix lcdif port node

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Reduce log messages seen after firmware download

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: fix error path in isotp_sendmsg() to unlock wait queue

Nathan Chancellor <nathan@kernel.org>
    Makefile.extrawarn: Move -Wunaligned-access to W=1

Armin Wolf <W_Armin@gmx.de>
    hwmon: (dell-smm) Speed up setting of fan speed

Kishon Vijay Abraham I <kishon@ti.com>
    phy: ti: Fix missing sentinel for clk_div_table

Samuel Thibault <samuel.thibault@ens-lyon.org>
    speakup-dectlk: Restore pitch setting

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: add CPI Bulk Coin Recycler id

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: add NCR Retail IO box id

Stephan Brunner <s.brunner@stephan-brunner.net>
    USB: serial: ch341: add support for GW Instek USB2.0-Serial devices

Pawel Dembicki <paweldembicki@gmail.com>
    USB: serial: option: add ZTE MF286D modem

Cameron Williams <cang1@live.co.uk>
    USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320

Jann Horn <jannh@google.com>
    usb: raw-gadget: fix handling of dual-direction-capable endpoints

Pavel Hofman <pavel.hofman@ivitera.com>
    usb: gadget: f_uac2: Define specific wTerminalType

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    usb: gadget: rndis: check size of RNDIS_MSG_SET command

Szymon Heidrich <szymon.heidrich@gmail.com>
    USB: gadget: validate interface OS descriptor requests

Adam Ford <aford173@gmail.com>
    usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition

Udipto Goswami <quic_ugoswami@quicinc.com>
    usb: dwc3: gadget: Prevent core from processing stale TRBs

Sean Anderson <sean.anderson@seco.com>
    usb: ulpi: Call of_node_put correctly

Sean Anderson <sean.anderson@seco.com>
    usb: ulpi: Move of_node_put to ulpi_dev_release

Jann Horn <jannh@google.com>
    net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"

Fabrice Gasnier <fabrice.gasnier@foss.st.com>
    usb: dwc2: drd: fix soft connect when gadget is unconfigured

Jonas Malaco <jonas@protocubo.io>
    eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX

TATSUKAWA KOSUKE (立川 江介) <tatsu-ab1@nec.com>
    n_tty: wake up poll(POLLRDNORM) on receiving data

Jakob Koschel <jakobkoschel@gmail.com>
    vt_ioctl: add array_index_nospec to VT_ACTIVATE

Jakob Koschel <jakobkoschel@gmail.com>
    vt_ioctl: fix array_index_nospec in vt_setactivate

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister

Colin Foster <colin.foster@in-advantage.com>
    net: mscc: ocelot: fix mutex lock error during ethtool stats read

Jesse Brandeburg <jesse.brandeburg@intel.com>
    ice: fix IPIP and SIT TSO offload

Dan Carpenter <dan.carpenter@oracle.com>
    ice: fix an error code in ice_cfg_phy_fec()

Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
    dpaa2-eth: unregister the netdev before disconnecting from the PHY

Raju Rangoju <Raju.Rangoju@amd.com>
    net: amd-xgbe: disable interrupts during pci removal

Jon Maloy <jmaloy@redhat.com>
    tipc: rate limit warning for received illegal binding update

Joel Stanley <joel@jms.id.au>
    net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE

Eric Dumazet <edumazet@google.com>
    veth: fix races around rq->rx_notify_masked

Antoine Tenart <atenart@kernel.org>
    net: fix a memleak when uncloning an skb dst and its metadata

Antoine Tenart <atenart@kernel.org>
    net: do not keep the dst cache when uncloning an skb dst and its metadata

Louis Peens <louis.peens@corigine.com>
    nfp: flower: fix ida_idx not being released

Eric Dumazet <edumazet@google.com>
    ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: lantiq_gswip: don't use devres for mdiobus

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: felix: don't use devres for mdiobus

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: bcm_sf2: don't use devres for mdiobus

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: ar9331: register the mdiobus under devres

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: mv88e6xxx: don't use devres for mdiobus

Mahesh Bandewar <maheshb@google.com>
    bonding: pair enable_port with slave_arr_updates

Niklas Cassel <niklas.cassel@wdc.com>
    gpio: sifive: use the correct register to read output values

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE

Christoph Niedermaier <cniedermaier@dh-electronics.com>
    drm/panel: simple: Assign data from panel_dpi_probe() correctly

Samuel Mendoza-Jonas <samjonas@amazon.com>
    ixgbevf: Require large buffers for build_skb on 82599VF

Dongjin Kim <tobetter@gmail.com>
    arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'

Florian Westphal <fw@strlen.de>
    netfilter: ctnetlink: disable helper autoassign

Mathias Krause <minipli@grsecurity.net>
    misc: fastrpc: avoid double fput() on failed usercopy

Dave Stevenson <dave.stevenson@raspberrypi.com>
    drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.

Geert Uytterhoeven <geert+renesas@glider.be>
    gpio: aggregator: Fix calling into sleeping GPIO controllers

Udipto Goswami <quic_ugoswami@quicinc.com>
    usb: f_fs: Fix use-after-free for epfile

Rob Herring <robh@kernel.org>
    ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo

Robert Hancock <robert.hancock@calian.com>
    phy: xilinx: zynqmp: Fix bus width setting for SGMII

Fabio Estevam <festevam@gmail.com>
    ARM: dts: imx6qdl-udoo: Properly describe the SD card detect

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    staging: fbtft: Fix error path in fbtft_driver_module_init()

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson8b: Fix the UART device-tree schema validation

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson8: Fix the UART device-tree schema validation

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson: Fix the UART compatible strings

Tony Lindgren <tony@atomide.com>
    ARM: dts: Fix timer regression for beagleboard revision c

Brian Norris <briannorris@chromium.org>
    drm/rockchip: vop: Correct RK3399 VOP register fields

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    PM: s2idle: ACPI: Fix wakeup interrupts handling

Robin Murphy <robin.murphy@arm.com>
    ACPI/IORT: Check node revision for PMCG resources

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: fix bogus request completion when failing to send AER

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    ARM: socfpga: fix missing RESET_CONTROLLER

Linus Walleij <linus.walleij@linaro.org>
    ARM: dts: Fix boot regression on Skomer

Fabio Estevam <festevam@gmail.com>
    ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group

Aurelien Jarno <aurelien@aurel32.net>
    riscv: fix build with binutils 2.38

Sean Christopherson <seanjc@google.com>
    KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow

Sean Christopherson <seanjc@google.com>
    KVM: SVM: Don't kill SEV guest if SMAP erratum triggers in usermode

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER

Hou Wenlong <houwenlong93@linux.alibaba.com>
    KVM: eventfd: Fix false positive RCU usage warning

Jisheng Zhang <jszhang@kernel.org>
    net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()

Wu Zheng <wu.zheng@intel.com>
    nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs

James Clark <james.clark@arm.com>
    perf: Always wake the parent event

Amelie Delaunay <amelie.delaunay@foss.st.com>
    usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend

Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
    PM: hibernate: Remove register_nosave_region_late()

Tong Zhang <ztong0001@gmail.com>
    scsi: myrs: Fix crash in error case

Kiwoong Kim <kwmad.kim@samsung.com>
    scsi: ufs: Treat link loss as fatal error

John Garry <john.garry@huawei.com>
    scsi: pm8001: Fix bogus FW crash for maxcpus=1

Saurav Kashyap <skashyap@marvell.com>
    scsi: qedf: Fix refcount issue when LOGO is received during TMF

Saurav Kashyap <skashyap@marvell.com>
    scsi: qedf: Add stag_work to all the vports

Xiaoke Wang <xkernel.wang@foxmail.com>
    scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()

ZouMingzhe <mingzhe.zou@easystack.cn>
    scsi: target: iscsi: Make sure the np under each tpg is unique

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/fixmap: Fix VM debug warning on unmap

Victor Nogueira <victor@mojatatu.com>
    net: sched: Clarify error message when qdisc kind is unknown

Raymond Jay Golo <rjgolo@gmail.com>
    drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer

Andi Kleen <ak@linux.intel.com>
    x86/perf: Avoid warning for Arch LBR without XSAVE

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 handle port presence in fs_location server string

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 expose nfs_parse_server_name function

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 remove zero number of fs_locations entries error check

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.1: Fix uninitialised variable in devicenotify

Xiaoke Wang <xkernel.wang@foxmail.com>
    nfs: nfs4clinet: check the return value of kstrdup()

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 only print the label when its queried

NeilBrown <neilb@suse.de>
    NFS: change nfs_access_get_cached to only report the mask

Tom Zanussi <zanussi@kernel.org>
    tracing: Propagate is_signed to expression

Huacai Chen <chenhc@lemote.com>
    drm/amdgpu: Set a suitable dev_info.gart_page_size

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Fix offset type in I/O trace points

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Clamp WRITE offsets

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Fix initialisation of nfs_client cl_flags field

Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
    net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
    net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: fix potential CAN frame reception race in isotp_rcv()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    mmc: sdhci-of-esdhc: Check for error num after setting mask

Stefan Berger <stefanb@linux.ibm.com>
    ima: Do not print policy rule with inactive LSM labels

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Allow template selection with ima_template[_fmt]= after ima_hash=

Stefan Berger <stefanb@linux.ibm.com>
    ima: Remove ima_policy file before directory

Xiaoke Wang <xkernel.wang@foxmail.com>
    integrity: check the return value of audit_log_start()


-------------

Diffstat:

 .../devicetree/bindings/arm/omap/omap.txt          |  3 +
 Makefile                                           |  4 +-
 arch/arm/boot/dts/Makefile                         |  1 +
 arch/arm/boot/dts/imx23-evk.dts                    |  1 -
 arch/arm/boot/dts/imx6qdl-udoo.dtsi                |  5 +-
 arch/arm/boot/dts/imx7ulp.dtsi                     |  2 +-
 arch/arm/boot/dts/meson.dtsi                       |  8 +--
 arch/arm/boot/dts/meson8.dtsi                      | 24 ++++----
 arch/arm/boot/dts/meson8b.dtsi                     | 24 ++++----
 arch/arm/boot/dts/omap3-beagle-ab4.dts             | 47 +++++++++++++++
 arch/arm/boot/dts/omap3-beagle.dts                 | 33 -----------
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts     |  4 --
 arch/arm/mach-socfpga/Kconfig                      |  2 +
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     |  4 +-
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  2 +-
 arch/powerpc/include/asm/book3s/32/pgtable.h       |  1 +
 arch/powerpc/include/asm/book3s/64/pgtable.h       |  2 +
 arch/powerpc/include/asm/fixmap.h                  |  6 +-
 arch/powerpc/include/asm/nohash/32/pgtable.h       |  1 +
 arch/powerpc/include/asm/nohash/64/pgtable.h       |  1 +
 arch/powerpc/mm/pgtable.c                          |  9 +++
 arch/riscv/Makefile                                |  6 ++
 arch/x86/events/intel/lbr.c                        |  3 +
 arch/x86/kvm/svm/svm.c                             | 16 ++++-
 arch/x86/kvm/vmx/evmcs.c                           |  1 +
 arch/x86/kvm/vmx/evmcs.h                           |  4 +-
 arch/x86/kvm/vmx/vmx.c                             | 25 ++++++++
 drivers/accessibility/speakup/speakup_dectlk.c     |  1 +
 drivers/acpi/arm64/iort.c                          | 14 ++++-
 drivers/acpi/ec.c                                  | 10 ++++
 drivers/acpi/sleep.c                               | 15 ++---
 drivers/base/power/wakeup.c                        | 41 ++++++++++---
 drivers/clocksource/timer-ti-dm-systimer.c         |  2 +-
 drivers/gpio/gpio-aggregator.c                     | 18 ++++--
 drivers/gpio/gpio-sifive.c                         |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c            |  4 +-
 drivers/gpu/drm/drm_panel_orientation_quirks.c     | 12 ++++
 drivers/gpu/drm/panel/panel-simple.c               |  1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c        |  8 ++-
 drivers/gpu/drm/vc4/vc4_hdmi.c                     |  2 +
 drivers/hwmon/dell-smm-hwmon.c                     | 12 ++--
 drivers/iommu/iommu.c                              |  9 ++-
 drivers/misc/eeprom/ee1004.c                       |  3 +
 drivers/misc/fastrpc.c                             |  9 ++-
 drivers/mmc/host/sdhci-of-esdhc.c                  |  8 ++-
 drivers/net/bonding/bond_3ad.c                     |  3 +-
 drivers/net/dsa/bcm_sf2.c                          |  7 ++-
 drivers/net/dsa/lantiq_gswip.c                     | 14 ++++-
 drivers/net/dsa/mv88e6xxx/chip.c                   | 15 +++--
 drivers/net/dsa/ocelot/felix_vsc9959.c             |  4 +-
 drivers/net/dsa/qca/ar9331.c                       |  3 +-
 drivers/net/ethernet/amd/xgbe/xgbe-pci.c           |  3 +
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |  4 +-
 drivers/net/ethernet/intel/ice/ice_common.c        |  3 +-
 drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h     |  1 +
 drivers/net/ethernet/intel/ice/ice_main.c          | 25 +++++---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c  | 13 +++--
 drivers/net/ethernet/mscc/ocelot.c                 | 11 ++--
 .../ethernet/netronome/nfp/flower/tunnel_conf.c    | 12 ++--
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |  2 +-
 drivers/net/mdio/mdio-aspeed.c                     |  1 +
 drivers/net/phy/marvell.c                          | 17 +++---
 drivers/net/usb/ax88179_178a.c                     | 68 +++++++++++++---------
 drivers/net/veth.c                                 | 13 +++--
 drivers/nvme/host/pci.c                            |  3 +-
 drivers/nvme/host/tcp.c                            | 10 +++-
 drivers/phy/ti/phy-j721e-wiz.c                     |  1 +
 drivers/phy/xilinx/phy-zynqmp.c                    | 11 ++--
 drivers/scsi/lpfc/lpfc.h                           | 13 ++++-
 drivers/scsi/lpfc/lpfc_attr.c                      |  4 +-
 drivers/scsi/lpfc/lpfc_init.c                      |  2 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |  8 ++-
 drivers/scsi/myrs.c                                |  3 +-
 drivers/scsi/pm8001/pm80xx_hwi.c                   | 16 ++++-
 drivers/scsi/pm8001/pm80xx_hwi.h                   |  6 +-
 drivers/scsi/qedf/qedf_io.c                        |  1 +
 drivers/scsi/qedf/qedf_main.c                      |  1 +
 drivers/scsi/ufs/ufshcd-pltfrm.c                   |  7 +++
 drivers/scsi/ufs/ufshci.h                          |  3 +-
 drivers/staging/fbtft/fbtft.h                      |  5 +-
 drivers/target/iscsi/iscsi_target_tpg.c            |  3 +
 drivers/tty/n_tty.c                                |  4 +-
 drivers/tty/vt/vt_ioctl.c                          |  3 +-
 drivers/usb/common/ulpi.c                          | 10 +++-
 drivers/usb/dwc2/gadget.c                          |  2 +-
 drivers/usb/dwc3/gadget.c                          | 13 +++++
 drivers/usb/gadget/composite.c                     |  3 +
 drivers/usb/gadget/function/f_fs.c                 | 56 +++++++++++++-----
 drivers/usb/gadget/function/f_uac2.c               |  4 +-
 drivers/usb/gadget/function/rndis.c                |  9 ++-
 drivers/usb/gadget/legacy/raw_gadget.c             |  2 +-
 drivers/usb/gadget/udc/renesas_usb3.c              |  2 +
 drivers/usb/serial/ch341.c                         |  1 +
 drivers/usb/serial/cp210x.c                        |  2 +
 drivers/usb/serial/ftdi_sio.c                      |  3 +
 drivers/usb/serial/ftdi_sio_ids.h                  |  3 +
 drivers/usb/serial/option.c                        |  2 +
 fs/nfs/callback.h                                  |  2 +-
 fs/nfs/callback_proc.c                             |  2 +-
 fs/nfs/callback_xdr.c                              | 18 +++---
 fs/nfs/client.c                                    |  2 +-
 fs/nfs/dir.c                                       | 20 +++----
 fs/nfs/nfs4_fs.h                                   |  3 +-
 fs/nfs/nfs4client.c                                |  5 +-
 fs/nfs/nfs4namespace.c                             | 19 +++---
 fs/nfs/nfs4proc.c                                  | 18 +++---
 fs/nfs/nfs4state.c                                 |  3 +
 fs/nfs/nfs4xdr.c                                   |  9 ++-
 fs/nfsd/nfs3proc.c                                 |  5 ++
 fs/nfsd/nfs4proc.c                                 |  5 +-
 fs/nfsd/trace.h                                    | 14 ++---
 include/linux/nfs_fs.h                             |  4 +-
 include/linux/suspend.h                            | 15 +----
 include/net/dst_metadata.h                         | 14 ++++-
 include/uapi/linux/netfilter/nf_conntrack_common.h |  2 +-
 kernel/events/core.c                               | 16 +++--
 kernel/power/main.c                                |  5 +-
 kernel/power/process.c                             |  2 +-
 kernel/power/snapshot.c                            | 21 +++----
 kernel/power/suspend.c                             |  2 -
 kernel/trace/trace_events_hist.c                   |  3 +
 net/can/isotp.c                                    | 27 +++++++--
 net/ipv4/ipmr.c                                    |  2 +
 net/ipv6/ip6mr.c                                   |  2 +
 net/netfilter/nf_conntrack_netlink.c               |  3 +-
 net/sched/sch_api.c                                |  2 +-
 net/tipc/name_distr.c                              |  2 +-
 scripts/Makefile.extrawarn                         |  1 +
 security/integrity/ima/ima_fs.c                    |  2 +-
 security/integrity/ima/ima_policy.c                |  8 +++
 security/integrity/ima/ima_template.c              | 10 +++-
 security/integrity/integrity_audit.c               |  2 +
 virt/kvm/eventfd.c                                 |  8 +--
 133 files changed, 767 insertions(+), 356 deletions(-)

[PATCH 5.10 001/116] integrity: check the return value of audit_log_start()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

commit 83230351c523b04ff8a029a4bdf97d881ecb96fc upstream.

audit_log_start() returns audit_buffer pointer on success or NULL on
error, so it is better to check the return value of it.

Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/integrity_audit.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/security/integrity/integrity_audit.c
+++ b/security/integrity/integrity_audit.c
@@ -45,6 +45,8 @@ void integrity_audit_message(int audit_m
 		return;
 
 	ab = audit_log_start(audit_context(), GFP_KERNEL, audit_msgno);
+	if (!ab)
+		return;
 	audit_log_format(ab, "pid=%d uid=%u auid=%u ses=%u",
 			 task_pid_nr(current),
 			 from_kuid(&init_user_ns, current_uid()),

[PATCH 5.10 002/116] ima: Remove ima_policy file before directory

[Greg Kroah-Hartman]

From: Stefan Berger <stefanb@linux.ibm.com>

commit f7333b9572d0559e00352a926c92f29f061b4569 upstream.

The removal of ima_dir currently fails since ima_policy still exists, so
remove the ima_policy file before removing the directory.

Fixes: 4af4662fa4a9 ("integrity: IMA policy")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/ima_fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -496,12 +496,12 @@ int __init ima_fs_init(void)
 
 	return 0;
 out:
+	securityfs_remove(ima_policy);
 	securityfs_remove(violations);
 	securityfs_remove(runtime_measurements_count);
 	securityfs_remove(ascii_runtime_measurements);
 	securityfs_remove(binary_runtime_measurements);
 	securityfs_remove(ima_symlink);
 	securityfs_remove(ima_dir);
-	securityfs_remove(ima_policy);
 	return -1;
 }

[PATCH 5.10 003/116] ima: Allow template selection with ima_template[_fmt]= after ima_hash=

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit bb8e52e4906f148c2faf6656b5106cf7233e9301 upstream.

Commit c2426d2ad5027 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.

Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.

Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.

Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.

Reported-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Fixes: c2426d2ad5027 ("ima: added support for new kernel cmdline parameter ima_template_fmt")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/ima_template.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/security/integrity/ima/ima_template.c
+++ b/security/integrity/ima/ima_template.c
@@ -27,6 +27,7 @@ static struct ima_template_desc builtin_
 
 static LIST_HEAD(defined_templates);
 static DEFINE_SPINLOCK(template_list);
+static int template_setup_done;
 
 static const struct ima_template_field supported_fields[] = {
 	{.field_id = "d", .field_init = ima_eventdigest_init,
@@ -80,10 +81,11 @@ static int __init ima_template_setup(cha
 	struct ima_template_desc *template_desc;
 	int template_len = strlen(str);
 
-	if (ima_template)
+	if (template_setup_done)
 		return 1;
 
-	ima_init_template_list();
+	if (!ima_template)
+		ima_init_template_list();
 
 	/*
 	 * Verify that a template with the supplied name exists.
@@ -107,6 +109,7 @@ static int __init ima_template_setup(cha
 	}
 
 	ima_template = template_desc;
+	template_setup_done = 1;
 	return 1;
 }
 __setup("ima_template=", ima_template_setup);
@@ -115,7 +118,7 @@ static int __init ima_template_fmt_setup
 {
 	int num_templates = ARRAY_SIZE(builtin_templates);
 
-	if (ima_template)
+	if (template_setup_done)
 		return 1;
 
 	if (template_desc_init_fields(str, NULL, NULL) < 0) {
@@ -126,6 +129,7 @@ static int __init ima_template_fmt_setup
 
 	builtin_templates[num_templates - 1].fmt = str;
 	ima_template = builtin_templates + num_templates - 1;
+	template_setup_done = 1;
 
 	return 1;
 }

[PATCH 5.10 004/116] ima: Do not print policy rule with inactive LSM labels

[Greg Kroah-Hartman]

From: Stefan Berger <stefanb@linux.ibm.com>

commit 89677197ae709eb1ab3646952c44f6a171c9e74c upstream.

Before printing a policy rule scan for inactive LSM labels in the policy
rule. Inactive LSM labels are identified by args_p != NULL and
rule == NULL.

Fixes: 483ec26eed42 ("ima: ima/lsm policy rule loading logic bug fixes")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: Christian Brauner <brauner@kernel.org>
[zohar@linux.ibm.com: Updated "Fixes" tag]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/ima_policy.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -1636,6 +1636,14 @@ int ima_policy_show(struct seq_file *m,
 
 	rcu_read_lock();
 
+	/* Do not print rules with inactive LSM labels */
+	for (i = 0; i < MAX_LSM_RULES; i++) {
+		if (entry->lsm[i].args_p && !entry->lsm[i].rule) {
+			rcu_read_unlock();
+			return 0;
+		}
+	}
+
 	if (entry->action & MEASURE)
 		seq_puts(m, pt(Opt_measure));
 	if (entry->action & DONT_MEASURE)

[PATCH 5.10 005/116] mmc: sdhci-of-esdhc: Check for error num after setting mask

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit 40c67c291a93f8846c4a972c9ef1b7ba4544c8d0 upstream.

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
And since the sdhci_setup_host() has already checked the return value of
the enable_dma, we need not check it in sdhci_resume_host() again.

Fixes: 5552d7ad596c ("mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220112083156.1124782-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-of-esdhc.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -524,12 +524,16 @@ static void esdhc_of_adma_workaround(str
 
 static int esdhc_of_enable_dma(struct sdhci_host *host)
 {
+	int ret;
 	u32 value;
 	struct device *dev = mmc_dev(host->mmc);
 
 	if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") ||
-	    of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc"))
-		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+	    of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) {
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+		if (ret)
+			return ret;
+	}
 
 	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
 

[PATCH 5.10 006/116] can: isotp: fix potential CAN frame reception race in isotp_rcv()

[Greg Kroah-Hartman]

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 7c759040c1dd03954f650f147ae7175476d51314 upstream.

When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.

Ziyang Xuan writes:

The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().

=======================================================
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0
RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113
Call Trace:
 <TASK>
 skb_over_panic net/core/skbuff.c:118 [inline]
 skb_put.cold+0x24/0x24 net/core/skbuff.c:1990
 isotp_rcv_cf net/can/isotp.c:570 [inline]
 isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668
 deliver net/can/af_can.c:574 [inline]
 can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635
 can_receive+0x31d/0x580 net/can/af_can.c:665
 can_rcv+0x120/0x1c0 net/can/af_can.c:696
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579

Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/linux-can/d7e69278-d741-c706-65e1-e87623d9a8e8@huawei.com/T/
Link: https://lore.kernel.org/all/20220208200026.13783-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com
Reported-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -56,6 +56,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/spinlock.h>
 #include <linux/hrtimer.h>
 #include <linux/wait.h>
 #include <linux/uio.h>
@@ -145,6 +146,7 @@ struct isotp_sock {
 	struct tpcon rx, tx;
 	struct list_head notifier;
 	wait_queue_head_t wait;
+	spinlock_t rx_lock; /* protect single thread state machine */
 };
 
 static LIST_HEAD(isotp_notifier_list);
@@ -615,11 +617,17 @@ static void isotp_rcv(struct sk_buff *sk
 
 	n_pci_type = cf->data[ae] & 0xF0;
 
+	/* Make sure the state changes and data structures stay consistent at
+	 * CAN frame reception time. This locking is not needed in real world
+	 * use cases but the inconsistency can be triggered with syzkaller.
+	 */
+	spin_lock(&so->rx_lock);
+
 	if (so->opt.flags & CAN_ISOTP_HALF_DUPLEX) {
 		/* check rx/tx path half duplex expectations */
 		if ((so->tx.state != ISOTP_IDLE && n_pci_type != N_PCI_FC) ||
 		    (so->rx.state != ISOTP_IDLE && n_pci_type == N_PCI_FC))
-			return;
+			goto out_unlock;
 	}
 
 	switch (n_pci_type) {
@@ -668,6 +676,9 @@ static void isotp_rcv(struct sk_buff *sk
 		isotp_rcv_cf(sk, cf, ae, skb);
 		break;
 	}
+
+out_unlock:
+	spin_unlock(&so->rx_lock);
 }
 
 static void isotp_fill_dataframe(struct canfd_frame *cf, struct isotp_sock *so,
@@ -1407,6 +1418,7 @@ static int isotp_init(struct sock *sk)
 	so->txtimer.function = isotp_tx_timer_handler;
 
 	init_waitqueue_head(&so->wait);
+	spin_lock_init(&so->rx_lock);
 
 	spin_lock(&isotp_notifier_lock);
 	list_add_tail(&so->notifier, &isotp_notifier_list);

[PATCH 5.10 007/116] net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs

[Greg Kroah-Hartman]

From: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>

commit fe4f57bf7b585dca58f1496c4e2481ecbae18126 upstream.

It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.

Cc: stable@vger.kernel.org
Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/marvell.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -515,9 +515,9 @@ static int m88e1121_config_aneg_rgmii_de
 	else
 		mscr = 0;
 
-	return phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
-				MII_88E1121_PHY_MSCR_REG,
-				MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
+	return phy_modify_paged_changed(phydev, MII_MARVELL_MSCR_PAGE,
+					MII_88E1121_PHY_MSCR_REG,
+					MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
 }
 
 static int m88e1121_config_aneg(struct phy_device *phydev)
@@ -531,11 +531,13 @@ static int m88e1121_config_aneg(struct p
 			return err;
 	}
 
+	changed = err;
+
 	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
 
-	changed = err;
+	changed |= err;
 
 	err = genphy_config_aneg(phydev);
 	if (err < 0)

[PATCH 5.10 008/116] net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

[Greg Kroah-Hartman]

From: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>

commit aec12836e7196e4d360b2cbf20cf7aa5139ad2ec upstream.

When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.

Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/marvell.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1061,16 +1061,15 @@ static int m88e1118_config_aneg(struct p
 {
 	int err;
 
-	err = genphy_soft_reset(phydev);
+	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
 
-	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
+	err = genphy_config_aneg(phydev);
 	if (err < 0)
 		return err;
 
-	err = genphy_config_aneg(phydev);
-	return 0;
+	return genphy_soft_reset(phydev);
 }
 
 static int m88e1118_config_init(struct phy_device *phydev)

[PATCH 5.10 009/116] NFS: Fix initialisation of nfs_client cl_flags field

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 468d126dab45718feeb728319be20bd869a5eaa7 upstream.

For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().

Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()")
Cc: stable@vger.kernel.org # 4.8.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -177,6 +177,7 @@ struct nfs_client *nfs_alloc_client(cons
 	INIT_LIST_HEAD(&clp->cl_superblocks);
 	clp->cl_rpcclient = ERR_PTR(-EINVAL);
 
+	clp->cl_flags = cl_init->init_flags;
 	clp->cl_proto = cl_init->proto;
 	clp->cl_nconnect = cl_init->nconnect;
 	clp->cl_net = get_net(cl_init->net);
@@ -426,7 +427,6 @@ struct nfs_client *nfs_get_client(const
 			list_add_tail(&new->cl_share_link,
 					&nn->nfs_client_list);
 			spin_unlock(&nn->nfs_client_lock);
-			new->cl_flags = cl_init->init_flags;
 			return rpc_ops->init_client(new, cl_init);
 		}
 

[PATCH 5.10 010/116] NFSD: Clamp WRITE offsets

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 6260d9a56ab352b54891ec66ab0eced57d55abc6 upstream.

Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs3proc.c |    5 +++++
 fs/nfsd/nfs4proc.c |    5 +++--
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -183,6 +183,11 @@ nfsd3_proc_write(struct svc_rqst *rqstp)
 				(unsigned long long) argp->offset,
 				argp->stable? " stable" : "");
 
+	resp->status = nfserr_fbig;
+	if (argp->offset > (u64)OFFSET_MAX ||
+	    argp->offset + argp->len > (u64)OFFSET_MAX)
+		return rpc_success;
+
 	fh_copy(&resp->fh, &argp->fh);
 	resp->committed = argp->stable;
 	nvecs = svc_fill_write_vector(rqstp, rqstp->rq_arg.pages,
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1008,8 +1008,9 @@ nfsd4_write(struct svc_rqst *rqstp, stru
 	unsigned long cnt;
 	int nvecs;
 
-	if (write->wr_offset >= OFFSET_MAX)
-		return nfserr_inval;
+	if (write->wr_offset > (u64)OFFSET_MAX ||
+	    write->wr_offset + write->wr_buflen > (u64)OFFSET_MAX)
+		return nfserr_fbig;
 
 	cnt = write->wr_buflen;
 	trace_nfsd_write_start(rqstp, &cstate->current_fh,

[PATCH 5.10 011/116] NFSD: Fix offset type in I/O trace points

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 6a4d333d540041d244b2fca29b8417bfde20af81 upstream.

NFSv3 and NFSv4 use u64 offset values on the wire. Record these values
verbatim without the implicit type case to loff_t.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/trace.h |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/fs/nfsd/trace.h
+++ b/fs/nfsd/trace.h
@@ -175,14 +175,14 @@ TRACE_EVENT(nfsd_export_update,
 DECLARE_EVENT_CLASS(nfsd_io_class,
 	TP_PROTO(struct svc_rqst *rqstp,
 		 struct svc_fh	*fhp,
-		 loff_t		offset,
-		 unsigned long	len),
+		 u64		offset,
+		 u32		len),
 	TP_ARGS(rqstp, fhp, offset, len),
 	TP_STRUCT__entry(
 		__field(u32, xid)
 		__field(u32, fh_hash)
-		__field(loff_t, offset)
-		__field(unsigned long, len)
+		__field(u64, offset)
+		__field(u32, len)
 	),
 	TP_fast_assign(
 		__entry->xid = be32_to_cpu(rqstp->rq_xid);
@@ -190,7 +190,7 @@ DECLARE_EVENT_CLASS(nfsd_io_class,
 		__entry->offset = offset;
 		__entry->len = len;
 	),
-	TP_printk("xid=0x%08x fh_hash=0x%08x offset=%lld len=%lu",
+	TP_printk("xid=0x%08x fh_hash=0x%08x offset=%llu len=%u",
 		  __entry->xid, __entry->fh_hash,
 		  __entry->offset, __entry->len)
 )
@@ -199,8 +199,8 @@ DECLARE_EVENT_CLASS(nfsd_io_class,
 DEFINE_EVENT(nfsd_io_class, nfsd_##name,	\
 	TP_PROTO(struct svc_rqst *rqstp,	\
 		 struct svc_fh	*fhp,		\
-		 loff_t		offset,		\
-		 unsigned long	len),		\
+		 u64		offset,		\
+		 u32		len),		\
 	TP_ARGS(rqstp, fhp, offset, len))
 
 DEFINE_NFSD_IO_EVENT(read_start);

[PATCH 5.10 012/116] drm/amdgpu: Set a suitable dev_info.gart_page_size

[Greg Kroah-Hartman]

From: Huacai Chen <chenhc@lemote.com>

commit f4d3da72a76a9ce5f57bba64788931686a9dc333 upstream.

In Mesa, dev_info.gart_page_size is used for alignment and it was
set to AMDGPU_GPU_PAGE_SIZE(4KB). However, the page table of AMDGPU
driver requires an alignment on CPU pages.  So, for non-4KB page system,
gart_page_size should be max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE).

Signed-off-by: Rui Wang <wangr@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Link: https://github.com/loongson-community/linux-stable/commit/caa9c0a1
[Xi: rebased for drm-next, use max_t for checkpatch,
     and reworded commit message.]
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1549
Tested-by: Dan Horák <dan@danny.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Salvatore Bonaccorso: Backport to 5.10.y which does not contain
a5a52a43eac0 ("drm/amd/amdgpu/amdgpu_kms: Remove 'struct
drm_amdgpu_info_device dev_info' from the stack") which removes dev_info
from the stack and places it on the heap.]
Tested-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -766,9 +766,9 @@ static int amdgpu_info_ioctl(struct drm_
 			dev_info.high_va_offset = AMDGPU_GMC_HOLE_END;
 			dev_info.high_va_max = AMDGPU_GMC_HOLE_END | vm_size;
 		}
-		dev_info.virtual_address_alignment = max((int)PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE);
+		dev_info.virtual_address_alignment = max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE);
 		dev_info.pte_fragment_size = (1 << adev->vm_manager.fragment_size) * AMDGPU_GPU_PAGE_SIZE;
-		dev_info.gart_page_size = AMDGPU_GPU_PAGE_SIZE;
+		dev_info.gart_page_size = max_t(u32, PAGE_SIZE, AMDGPU_GPU_PAGE_SIZE);
 		dev_info.cu_active_number = adev->gfx.cu_info.number;
 		dev_info.cu_ao_mask = adev->gfx.cu_info.ao_cu_mask;
 		dev_info.ce_ram_size = adev->gfx.ce_ram_size;

[PATCH 5.10 013/116] tracing: Propagate is_signed to expression

[Greg Kroah-Hartman]

From: Tom Zanussi <zanussi@kernel.org>

commit 097f1eefedeab528cecbd35586dfe293853ffb17 upstream.

During expression parsing, a new expression field is created which
should inherit the properties of the operands, such as size and
is_signed.

is_signed propagation was missing, causing spurious errors with signed
operands.  Add it in parse_expr() and parse_unary() to fix the problem.

Link: https://lkml.kernel.org/r/f4dac08742fd7a0920bf80a73c6c44042f5eaa40.1643319703.git.zanussi@kernel.org

Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Reported-by: Yordan Karadzhov <ykaradzhov@vmware.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215513
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_events_hist.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -2154,6 +2154,8 @@ static struct hist_field *parse_unary(st
 		(HIST_FIELD_FL_TIMESTAMP | HIST_FIELD_FL_TIMESTAMP_USECS);
 	expr->fn = hist_field_unary_minus;
 	expr->operands[0] = operand1;
+	expr->size = operand1->size;
+	expr->is_signed = operand1->is_signed;
 	expr->operator = FIELD_OP_UNARY_MINUS;
 	expr->name = expr_str(expr, 0);
 	expr->type = kstrdup(operand1->type, GFP_KERNEL);
@@ -2293,6 +2295,7 @@ static struct hist_field *parse_expr(str
 
 	/* The operand sizes should be the same, so just pick one */
 	expr->size = operand1->size;
+	expr->is_signed = operand1->is_signed;
 
 	expr->operator = field_op;
 	expr->name = expr_str(expr, 0);

[PATCH 5.10 014/116] NFS: change nfs_access_get_cached to only report the mask

[Greg Kroah-Hartman]

From: NeilBrown <neilb@suse.de>

[ Upstream commit b5e7b59c3480f355910f9d2c6ece5857922a5e54 ]

Currently the nfs_access_get_cached family of functions report a
'struct nfs_access_entry' as the result, with both .mask and .cred set.
However the .cred is never used.  This is probably good and there is no
guarantee that it won't be freed before use.

Change to only report the 'mask' - as this is all that is used or needed.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c           | 20 +++++++++-----------
 fs/nfs/nfs4proc.c      | 18 +++++++++---------
 include/linux/nfs_fs.h |  4 ++--
 3 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index a23b7a5dec9ee..682c7b45d8b71 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -2489,7 +2489,7 @@ static struct nfs_access_entry *nfs_access_search_rbtree(struct inode *inode, co
 	return NULL;
 }
 
-static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *cred, struct nfs_access_entry *res, bool may_block)
+static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *cred, u32 *mask, bool may_block)
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
 	struct nfs_access_entry *cache;
@@ -2519,8 +2519,7 @@ static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *
 		spin_lock(&inode->i_lock);
 		retry = false;
 	}
-	res->cred = cache->cred;
-	res->mask = cache->mask;
+	*mask = cache->mask;
 	list_move_tail(&cache->lru, &nfsi->access_cache_entry_lru);
 	err = 0;
 out:
@@ -2532,7 +2531,7 @@ static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *
 	return -ENOENT;
 }
 
-static int nfs_access_get_cached_rcu(struct inode *inode, const struct cred *cred, struct nfs_access_entry *res)
+static int nfs_access_get_cached_rcu(struct inode *inode, const struct cred *cred, u32 *mask)
 {
 	/* Only check the most recently returned cache entry,
 	 * but do it without locking.
@@ -2554,22 +2553,21 @@ static int nfs_access_get_cached_rcu(struct inode *inode, const struct cred *cre
 		goto out;
 	if (nfs_check_cache_invalid(inode, NFS_INO_INVALID_ACCESS))
 		goto out;
-	res->cred = cache->cred;
-	res->mask = cache->mask;
+	*mask = cache->mask;
 	err = 0;
 out:
 	rcu_read_unlock();
 	return err;
 }
 
-int nfs_access_get_cached(struct inode *inode, const struct cred *cred, struct
-nfs_access_entry *res, bool may_block)
+int nfs_access_get_cached(struct inode *inode, const struct cred *cred,
+			  u32 *mask, bool may_block)
 {
 	int status;
 
-	status = nfs_access_get_cached_rcu(inode, cred, res);
+	status = nfs_access_get_cached_rcu(inode, cred, mask);
 	if (status != 0)
-		status = nfs_access_get_cached_locked(inode, cred, res,
+		status = nfs_access_get_cached_locked(inode, cred, mask,
 		    may_block);
 
 	return status;
@@ -2690,7 +2688,7 @@ static int nfs_do_access(struct inode *inode, const struct cred *cred, int mask)
 
 	trace_nfs_access_enter(inode);
 
-	status = nfs_access_get_cached(inode, cred, &cache, may_block);
+	status = nfs_access_get_cached(inode, cred, &cache.mask, may_block);
 	if (status == 0)
 		goto out_cached;
 
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 3106bd28b1132..d222a980164b7 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7597,7 +7597,7 @@ static int nfs4_xattr_set_nfs4_user(const struct xattr_handler *handler,
 				    const char *key, const void *buf,
 				    size_t buflen, int flags)
 {
-	struct nfs_access_entry cache;
+	u32 mask;
 	int ret;
 
 	if (!nfs_server_capable(inode, NFS_CAP_XATTR))
@@ -7612,8 +7612,8 @@ static int nfs4_xattr_set_nfs4_user(const struct xattr_handler *handler,
 	 * do a cached access check for the XA* flags to possibly avoid
 	 * doing an RPC and getting EACCES back.
 	 */
-	if (!nfs_access_get_cached(inode, current_cred(), &cache, true)) {
-		if (!(cache.mask & NFS_ACCESS_XAWRITE))
+	if (!nfs_access_get_cached(inode, current_cred(), &mask, true)) {
+		if (!(mask & NFS_ACCESS_XAWRITE))
 			return -EACCES;
 	}
 
@@ -7634,14 +7634,14 @@ static int nfs4_xattr_get_nfs4_user(const struct xattr_handler *handler,
 				    struct dentry *unused, struct inode *inode,
 				    const char *key, void *buf, size_t buflen)
 {
-	struct nfs_access_entry cache;
+	u32 mask;
 	ssize_t ret;
 
 	if (!nfs_server_capable(inode, NFS_CAP_XATTR))
 		return -EOPNOTSUPP;
 
-	if (!nfs_access_get_cached(inode, current_cred(), &cache, true)) {
-		if (!(cache.mask & NFS_ACCESS_XAREAD))
+	if (!nfs_access_get_cached(inode, current_cred(), &mask, true)) {
+		if (!(mask & NFS_ACCESS_XAREAD))
 			return -EACCES;
 	}
 
@@ -7666,13 +7666,13 @@ nfs4_listxattr_nfs4_user(struct inode *inode, char *list, size_t list_len)
 	ssize_t ret, size;
 	char *buf;
 	size_t buflen;
-	struct nfs_access_entry cache;
+	u32 mask;
 
 	if (!nfs_server_capable(inode, NFS_CAP_XATTR))
 		return 0;
 
-	if (!nfs_access_get_cached(inode, current_cred(), &cache, true)) {
-		if (!(cache.mask & NFS_ACCESS_XALIST))
+	if (!nfs_access_get_cached(inode, current_cred(), &mask, true)) {
+		if (!(mask & NFS_ACCESS_XALIST))
 			return 0;
 	}
 
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index aff5cd382fef5..1e0a3497bdb46 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -501,8 +501,8 @@ extern int nfs_instantiate(struct dentry *dentry, struct nfs_fh *fh,
 			struct nfs_fattr *fattr, struct nfs4_label *label);
 extern int nfs_may_open(struct inode *inode, const struct cred *cred, int openflags);
 extern void nfs_access_zap_cache(struct inode *inode);
-extern int nfs_access_get_cached(struct inode *inode, const struct cred *cred, struct nfs_access_entry *res,
-				 bool may_block);
+extern int nfs_access_get_cached(struct inode *inode, const struct cred *cred,
+				 u32 *mask, bool may_block);
 
 /*
  * linux/fs/nfs/symlink.c
-- 
2.34.1

[PATCH 5.10 015/116] NFSv4 only print the label when its queried

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 2c52c8376db7160a1dd8a681c61c9258405ef143 ]

When the bitmask of the attributes doesn't include the security label,
don't bother printing it. Since the label might not be null terminated,
adjust the printing format accordingly.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4xdr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index c16b93df1bc14..9f8bd45379e72 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -4184,10 +4184,11 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap,
 		} else
 			printk(KERN_WARNING "%s: label too long (%u)!\n",
 					__func__, len);
+		if (label && label->label)
+			dprintk("%s: label=%.*s, len=%d, PI=%d, LFS=%d\n",
+				__func__, label->len, (char *)label->label,
+				label->len, label->pi, label->lfs);
 	}
-	if (label && label->label)
-		dprintk("%s: label=%s, len=%d, PI=%d, LFS=%d\n", __func__,
-			(char *)label->label, label->len, label->pi, label->lfs);
 	return status;
 }
 
-- 
2.34.1

[PATCH 5.10 016/116] nfs: nfs4clinet: check the return value of kstrdup()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit fbd2057e5329d3502a27491190237b6be52a1cb6 ]

kstrdup() returns NULL when some internal memory errors happen, it is
better to check the return value of it so to catch the memory error in
time.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4client.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 6d74f2e2de461..0e6437b08a3a5 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -1330,8 +1330,11 @@ int nfs4_update_server(struct nfs_server *server, const char *hostname,
 	}
 	nfs_put_client(clp);
 
-	if (server->nfs_client->cl_hostname == NULL)
+	if (server->nfs_client->cl_hostname == NULL) {
 		server->nfs_client->cl_hostname = kstrdup(hostname, GFP_KERNEL);
+		if (server->nfs_client->cl_hostname == NULL)
+			return -ENOMEM;
+	}
 	nfs_server_insert_lists(server);
 
 	return nfs_probe_destination(server);
-- 
2.34.1

[PATCH 5.10 017/116] NFSv4.1: Fix uninitialised variable in devicenotify

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit b05bf5c63b326ce1da84ef42498d8e0e292e694c ]

When decode_devicenotify_args() exits with no entries, we need to
ensure that the struct cb_devicenotifyargs is initialised to
{ 0, NULL } in order to avoid problems in
nfs4_callback_devicenotify().

Reported-by: <rtm@csail.mit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/callback.h      |  2 +-
 fs/nfs/callback_proc.c |  2 +-
 fs/nfs/callback_xdr.c  | 18 +++++++++---------
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h
index 6a2033131c068..ccd4f245cae24 100644
--- a/fs/nfs/callback.h
+++ b/fs/nfs/callback.h
@@ -170,7 +170,7 @@ struct cb_devicenotifyitem {
 };
 
 struct cb_devicenotifyargs {
-	int				 ndevs;
+	uint32_t			 ndevs;
 	struct cb_devicenotifyitem	 *devs;
 };
 
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index be546ece383f5..b44219ce60b86 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -353,7 +353,7 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
 				  struct cb_process_state *cps)
 {
 	struct cb_devicenotifyargs *args = argp;
-	int i;
+	uint32_t i;
 	__be32 res = 0;
 	struct nfs_client *clp = cps->clp;
 	struct nfs_server *server = NULL;
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 79ff172eb1c81..1725079a05276 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -259,11 +259,9 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
 				void *argp)
 {
 	struct cb_devicenotifyargs *args = argp;
+	uint32_t tmp, n, i;
 	__be32 *p;
 	__be32 status = 0;
-	u32 tmp;
-	int n, i;
-	args->ndevs = 0;
 
 	/* Num of device notifications */
 	p = xdr_inline_decode(xdr, sizeof(uint32_t));
@@ -272,7 +270,7 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
 		goto out;
 	}
 	n = ntohl(*p++);
-	if (n <= 0)
+	if (n == 0)
 		goto out;
 	if (n > ULONG_MAX / sizeof(*args->devs)) {
 		status = htonl(NFS4ERR_BADXDR);
@@ -331,19 +329,21 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
 			dev->cbd_immediate = 0;
 		}
 
-		args->ndevs++;
-
 		dprintk("%s: type %d layout 0x%x immediate %d\n",
 			__func__, dev->cbd_notify_type, dev->cbd_layout_type,
 			dev->cbd_immediate);
 	}
+	args->ndevs = n;
+	dprintk("%s: ndevs %d\n", __func__, args->ndevs);
+	return 0;
+err:
+	kfree(args->devs);
 out:
+	args->devs = NULL;
+	args->ndevs = 0;
 	dprintk("%s: status %d ndevs %d\n",
 		__func__, ntohl(status), args->ndevs);
 	return status;
-err:
-	kfree(args->devs);
-	goto out;
 }
 
 static __be32 decode_sessionid(struct xdr_stream *xdr,
-- 
2.34.1

[PATCH 5.10 018/116] NFSv4 remove zero number of fs_locations entries error check

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 90e12a3191040bd3854d3e236c35921e4e92a044 ]

Remove the check for the zero length fs_locations reply in the
xdr decoding, and instead check for that in the migration code.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4state.c | 3 +++
 fs/nfs/nfs4xdr.c   | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 4bf10792cb5b1..cbeec29e9f21a 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -2104,6 +2104,9 @@ static int nfs4_try_migration(struct nfs_server *server, const struct cred *cred
 	}
 
 	result = -NFS4ERR_NXIO;
+	if (!locations->nlocations)
+		goto out;
+
 	if (!(locations->fattr.valid & NFS_ATTR_FATTR_V4_LOCATIONS)) {
 		dprintk("<-- %s: No fs_locations data, migration skipped\n",
 			__func__);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 9f8bd45379e72..e2f0e3446e22a 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -3680,8 +3680,6 @@ static int decode_attr_fs_locations(struct xdr_stream *xdr, uint32_t *bitmap, st
 	if (unlikely(!p))
 		goto out_eio;
 	n = be32_to_cpup(p);
-	if (n <= 0)
-		goto out_eio;
 	for (res->nlocations = 0; res->nlocations < n; res->nlocations++) {
 		u32 m;
 		struct nfs4_fs_location *loc;
-- 
2.34.1

[PATCH 5.10 019/116] NFSv4 expose nfs_parse_server_name function

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit f5b27cc6761e27ee6387a24df1a99ca77b360fea ]

Make nfs_parse_server_name available outside of nfs4namespace.c.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4_fs.h       | 3 ++-
 fs/nfs/nfs4namespace.c | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 3e344bec3647b..de71cf89a24ee 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -281,7 +281,8 @@ struct rpc_clnt *nfs4_negotiate_security(struct rpc_clnt *, struct inode *,
 int nfs4_submount(struct fs_context *, struct nfs_server *);
 int nfs4_replace_transport(struct nfs_server *server,
 				const struct nfs4_fs_locations *locations);
-
+size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
+			     size_t salen, struct net *net);
 /* nfs4proc.c */
 extern int nfs4_handle_exception(struct nfs_server *, int, struct nfs4_exception *);
 extern int nfs4_async_handle_error(struct rpc_task *task,
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 873342308dc0d..f1ed4f60a7f33 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -164,8 +164,8 @@ static int nfs4_validate_fspath(struct dentry *dentry,
 	return 0;
 }
 
-static size_t nfs_parse_server_name(char *string, size_t len,
-		struct sockaddr *sa, size_t salen, struct net *net)
+size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
+			     size_t salen, struct net *net)
 {
 	ssize_t ret;
 
-- 
2.34.1

[PATCH 5.10 020/116] NFSv4 handle port presence in fs_location server string

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit a8d54baba7c65db2d3278873def61f8d3753d766 ]

An fs_location attribute returns a string that can be ipv4, ipv6,
or DNS name. An ip location can have a port appended to it and if
no port is present a default port needs to be set. If rpc_pton()
fails to parse, try calling rpc_uaddr2socaddr() that can convert
an universal address.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4_fs.h       |  2 +-
 fs/nfs/nfs4namespace.c | 17 +++++++++++------
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index de71cf89a24ee..6d916563356ef 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -282,7 +282,7 @@ int nfs4_submount(struct fs_context *, struct nfs_server *);
 int nfs4_replace_transport(struct nfs_server *server,
 				const struct nfs4_fs_locations *locations);
 size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
-			     size_t salen, struct net *net);
+			     size_t salen, struct net *net, int port);
 /* nfs4proc.c */
 extern int nfs4_handle_exception(struct nfs_server *, int, struct nfs4_exception *);
 extern int nfs4_async_handle_error(struct rpc_task *task,
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index f1ed4f60a7f33..3680c8da510c9 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -165,15 +165,20 @@ static int nfs4_validate_fspath(struct dentry *dentry,
 }
 
 size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
-			     size_t salen, struct net *net)
+			     size_t salen, struct net *net, int port)
 {
 	ssize_t ret;
 
 	ret = rpc_pton(net, string, len, sa, salen);
 	if (ret == 0) {
-		ret = nfs_dns_resolve_name(net, string, len, sa, salen);
-		if (ret < 0)
-			ret = 0;
+		ret = rpc_uaddr2sockaddr(net, string, len, sa, salen);
+		if (ret == 0) {
+			ret = nfs_dns_resolve_name(net, string, len, sa, salen);
+			if (ret < 0)
+				ret = 0;
+		}
+	} else if (port) {
+		rpc_set_port(sa, port);
 	}
 	return ret;
 }
@@ -328,7 +333,7 @@ static int try_location(struct fs_context *fc,
 			nfs_parse_server_name(buf->data, buf->len,
 					      &ctx->nfs_server.address,
 					      sizeof(ctx->nfs_server._address),
-					      fc->net_ns);
+					      fc->net_ns, 0);
 		if (ctx->nfs_server.addrlen == 0)
 			continue;
 
@@ -496,7 +501,7 @@ static int nfs4_try_replacing_one_location(struct nfs_server *server,
 			continue;
 
 		salen = nfs_parse_server_name(buf->data, buf->len,
-						sap, addr_bufsize, net);
+						sap, addr_bufsize, net, 0);
 		if (salen == 0)
 			continue;
 		rpc_set_port(sap, NFS_PORT);
-- 
2.34.1

[PATCH 5.10 021/116] x86/perf: Avoid warning for Arch LBR without XSAVE

[Greg Kroah-Hartman]

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit 8c16dc047b5dd8f7b3bf4584fa75733ea0dde7dc ]

Some hypervisors support Arch LBR, but without the LBR XSAVE support.
The current Arch LBR init code prints a warning when the xsave size (0) is
unexpected. Avoid printing the warning for the "no LBR XSAVE" case.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211215204029.150686-1-ak@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/lbr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 9c1a013d56822..bd8516e6c353c 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -1734,6 +1734,9 @@ static bool is_arch_lbr_xsave_available(void)
 	 * Check the LBR state with the corresponding software structure.
 	 * Disable LBR XSAVES support if the size doesn't match.
 	 */
+	if (xfeature_size(XFEATURE_LBR) == 0)
+		return false;
+
 	if (WARN_ON(xfeature_size(XFEATURE_LBR) != get_lbr_state_size()))
 		return false;
 
-- 
2.34.1

[PATCH 5.10 022/116] drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer

[Greg Kroah-Hartman]

From: Raymond Jay Golo <rjgolo@gmail.com>

[ Upstream commit d3cbc6e323c9299d10c8d2e4127c77c7d05d07b1 ]

The 1Netbook OneXPlayer uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Signed-off-by: Raymond Jay Golo <rjgolo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113000619.90988-1-rjgolo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 9d1bd8f491ad7..448c2f2d803a6 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -115,6 +115,12 @@ static const struct drm_dmi_panel_orientation_data lcd1280x1920_rightside_up = {
 	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
+static const struct drm_dmi_panel_orientation_data lcd1600x2560_leftside_up = {
+	.width = 1600,
+	.height = 2560,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+};
+
 static const struct dmi_system_id orientation_data[] = {
 	{	/* Acer One 10 (S1003) */
 		.matches = {
@@ -261,6 +267,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Default string"),
 		},
 		.driver_data = (void *)&onegx1_pro,
+	}, {	/* OneXPlayer */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ONE-NETBOOK TECHNOLOGY CO., LTD."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ONE XPLAYER"),
+		},
+		.driver_data = (void *)&lcd1600x2560_leftside_up,
 	}, {	/* Samsung GalaxyBook 10.6 */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-- 
2.34.1

[PATCH 5.10 023/116] net: sched: Clarify error message when qdisc kind is unknown

[Greg Kroah-Hartman]

From: Victor Nogueira <victor@mojatatu.com>

[ Upstream commit 973bf8fdd12f0e70ea351c018e68edd377a836d1 ]

When adding a tc rule with a qdisc kind that is not supported or not
compiled into the kernel, the kernel emits the following error: "Error:
Specified qdisc not found.". Found via tdc testing when ETS qdisc was not
compiled in and it was not obvious right away what the message meant
without looking at the kernel code.

Change the error message to be more explicit and say the qdisc kind is
unknown.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 7b24582a8a164..6758968e79327 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1204,7 +1204,7 @@ static struct Qdisc *qdisc_create(struct net_device *dev,
 
 	err = -ENOENT;
 	if (!ops) {
-		NL_SET_ERR_MSG(extack, "Specified qdisc not found");
+		NL_SET_ERR_MSG(extack, "Specified qdisc kind is unknown");
 		goto err_out;
 	}
 
-- 
2.34.1

[PATCH 5.10 024/116] powerpc/fixmap: Fix VM debug warning on unmap

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit aec982603aa8cc0a21143681feb5f60ecc69d718 ]

Unmapping a fixmap entry is done by calling __set_fixmap()
with FIXMAP_PAGE_CLEAR as flags.

Today, powerpc __set_fixmap() calls map_kernel_page().

map_kernel_page() is not happy when called a second time
for the same page.

	WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8
	CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682
	NIP:  c0017cd4 LR: c00187f0 CTR: 00000010
	REGS: e1011d50 TRAP: 0700   Not tainted  (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty)
	MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 42000208  XER: 00000000

	GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c
	GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000
	GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
	GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000
	NIP [c0017cd4] set_pte_at+0xc/0x1e8
	LR [c00187f0] map_kernel_page+0x9c/0x100
	Call Trace:
	[e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable)
	[e1011e30] [c0165fec] __set_fixmap+0x30/0x44
	[e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170
	[e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0
	[e1011e90] [c0c03634] do_one_initcall+0x80/0x178
	[e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250
	[e1011f20] [c0007e34] kernel_init+0x24/0x140
	[e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64
	Instruction dump:
	7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010
	4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030

Implement unmap_kernel_page() which clears an existing pte.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/book3s/32/pgtable.h | 1 +
 arch/powerpc/include/asm/book3s/64/pgtable.h | 2 ++
 arch/powerpc/include/asm/fixmap.h            | 6 ++++--
 arch/powerpc/include/asm/nohash/32/pgtable.h | 1 +
 arch/powerpc/include/asm/nohash/64/pgtable.h | 1 +
 arch/powerpc/mm/pgtable.c                    | 9 +++++++++
 6 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 523d3e6e24009..94c5c66231a8c 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -142,6 +142,7 @@ static inline bool pte_user(pte_t pte)
 #ifndef __ASSEMBLY__
 
 int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
+void unmap_kernel_page(unsigned long va);
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 4a3dca0271f1e..71e2c524f1eea 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1054,6 +1054,8 @@ static inline int map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t p
 	return hash__map_kernel_page(ea, pa, prot);
 }
 
+void unmap_kernel_page(unsigned long va);
+
 static inline int __meminit vmemmap_create_mapping(unsigned long start,
 						   unsigned long page_size,
 						   unsigned long phys)
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 591b2f4deed53..897cc68758d44 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -111,8 +111,10 @@ static inline void __set_fixmap(enum fixed_addresses idx,
 		BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
 	else if (WARN_ON(idx >= __end_of_fixed_addresses))
 		return;
-
-	map_kernel_page(__fix_to_virt(idx), phys, flags);
+	if (pgprot_val(flags))
+		map_kernel_page(__fix_to_virt(idx), phys, flags);
+	else
+		unmap_kernel_page(__fix_to_virt(idx));
 }
 
 #define __early_set_fixmap	__set_fixmap
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index 96522f7f0618a..e53cc07e6b9ec 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -65,6 +65,7 @@ extern int icache_44x_need_flush;
 #ifndef __ASSEMBLY__
 
 int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
+void unmap_kernel_page(unsigned long va);
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 57cd3892bfe05..1eacff0fff029 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -311,6 +311,7 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
 #define __swp_entry_to_pte(x)		__pte((x).val)
 
 int map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot);
+void unmap_kernel_page(unsigned long va);
 extern int __meminit vmemmap_create_mapping(unsigned long start,
 					    unsigned long page_size,
 					    unsigned long phys);
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 15555c95cebc7..faaf33e204de1 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -194,6 +194,15 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 	__set_pte_at(mm, addr, ptep, pte, 0);
 }
 
+void unmap_kernel_page(unsigned long va)
+{
+	pmd_t *pmdp = pmd_off_k(va);
+	pte_t *ptep = pte_offset_kernel(pmdp, va);
+
+	pte_clear(&init_mm, va, ptep);
+	flush_tlb_kernel_range(va, va + PAGE_SIZE);
+}
+
 /*
  * This is called when relaxing access to a PTE. It's also called in the page
  * fault path when we don't hit any of the major fault cases, ie, a minor
-- 
2.34.1

[PATCH 5.10 025/116] scsi: target: iscsi: Make sure the np under each tpg is unique

[Greg Kroah-Hartman]

From: ZouMingzhe <mingzhe.zou@easystack.cn>

[ Upstream commit a861790afaa8b6369eee8a88c5d5d73f5799c0c6 ]

iscsit_tpg_check_network_portal() has nested for_each loops and is supposed
to return true when a match is found. However, the tpg loop will still
continue after existing the tpg_np loop. If this tpg_np is not the last the
match value will be changed.

Break the outer loop after finding a match and make sure the np under each
tpg is unique.

Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn
Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target_tpg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c
index 8075f60fd02c3..2d5cf1714ae05 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -443,6 +443,9 @@ static bool iscsit_tpg_check_network_portal(
 				break;
 		}
 		spin_unlock(&tpg->tpg_np_lock);
+
+		if (match)
+			break;
 	}
 	spin_unlock(&tiqn->tiqn_tpg_lock);
 
-- 
2.34.1

[PATCH 5.10 026/116] scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit a65b32748f4566f986ba2495a8236c141fa42a26 ]

devm_kstrdup() returns pointer to allocated string on success, NULL on
failure. So it is better to check the return value of it.

Link: https://lore.kernel.org/r/tencent_4257E15D4A94FF9020DDCC4BB9B21C041408@qq.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd-pltfrm.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index e49505534d498..0f2430fb398db 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -92,6 +92,11 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
 		clki->min_freq = clkfreq[i];
 		clki->max_freq = clkfreq[i+1];
 		clki->name = devm_kstrdup(dev, name, GFP_KERNEL);
+		if (!clki->name) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
 		if (!strcmp(name, "ref_clk"))
 			clki->keep_link_active = true;
 		dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
@@ -128,6 +133,8 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
 		return -ENOMEM;
 
 	vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
+	if (!vreg->name)
+		return -ENOMEM;
 
 	snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
 	if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {
-- 
2.34.1

[PATCH 5.10 027/116] scsi: qedf: Add stag_work to all the vports

[Greg Kroah-Hartman]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit b70a99fd13282d7885f69bf1372e28b7506a1613 ]

Call trace seen when creating NPIV ports, only 32 out of 64 show online.
stag work was not initialized for vport, hence initialize the stag work.

WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80
CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE    --------- --
 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021
Workqueue: events fc_lport_timeout [libfc]
RIP: 0010:__queue_delayed_work+0x68/0x80
Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81
f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb
c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23
RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006
RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002
RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788
RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750
R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58
R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18
FS:  0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  queue_delayed_work_on+0x36/0x40
  qedf_elsct_send+0x57/0x60 [qedf]
  fc_lport_enter_flogi+0x90/0xc0 [libfc]
  fc_lport_timeout+0xb7/0x140 [libfc]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x35/0x40
 ---[ end trace 008f00f722f2c2ff ]--

Initialize stag work for all the vports.

Link: https://lore.kernel.org/r/20220117135311.6256-2-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index c63dcc39f76c2..e64457f53da86 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -1859,6 +1859,7 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled)
 	vport_qedf->cmd_mgr = base_qedf->cmd_mgr;
 	init_completion(&vport_qedf->flogi_compl);
 	INIT_LIST_HEAD(&vport_qedf->fcports);
+	INIT_DELAYED_WORK(&vport_qedf->stag_work, qedf_stag_change_work);
 
 	rc = qedf_vport_libfc_config(vport, vn_port);
 	if (rc) {
-- 
2.34.1

[PATCH 5.10 028/116] scsi: qedf: Fix refcount issue when LOGO is received during TMF

[Greg Kroah-Hartman]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit 5239ab63f17cee643bd4bf6addfedebaa7d4f41e ]

Hung task call trace was seen during LOGO processing.

[  974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued...
[  974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0
[  974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET
[  974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1.
[  974.309625] host1: rport 016900: Received LOGO request while in state Ready
[  974.309627] host1: rport 016900: Delete port
[  974.309642] host1: rport 016900: work event 3
[  974.309644] host1: rport 016900: lld callback ev 3
[  974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush.
[  974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success...
[  984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds.
[  984.031136]       Not tainted 4.18.0-305.el8.x86_64 #1

[  984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  984.031209] jbd2/dm-15-8    D    0  7645      2 0x80004080
[  984.031212] Call Trace:
[  984.031222]  __schedule+0x2c4/0x700
[  984.031230]  ? unfreeze_partials.isra.83+0x16e/0x1a0
[  984.031233]  ? bit_wait_timeout+0x90/0x90
[  984.031235]  schedule+0x38/0xa0
[  984.031238]  io_schedule+0x12/0x40
[  984.031240]  bit_wait_io+0xd/0x50
[  984.031243]  __wait_on_bit+0x6c/0x80
[  984.031248]  ? free_buffer_head+0x21/0x50
[  984.031251]  out_of_line_wait_on_bit+0x91/0xb0
[  984.031257]  ? init_wait_var_entry+0x50/0x50
[  984.031268]  jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2]
[  984.031280]  kjournald2+0xbd/0x270 [jbd2]
[  984.031284]  ? finish_wait+0x80/0x80
[  984.031291]  ? commit_timeout+0x10/0x10 [jbd2]
[  984.031294]  kthread+0x116/0x130
[  984.031300]  ? kthread_flush_work_fn+0x10/0x10
[  984.031305]  ret_from_fork+0x1f/0x40

There was a ref count issue when LOGO is received during TMF. This leads to
one of the I/Os hanging with the driver. Fix the ref count.

Link: https://lore.kernel.org/r/20220117135311.6256-3-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_io.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 63f99f4eeed97..472374d83cede 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -2268,6 +2268,7 @@ int qedf_initiate_cleanup(struct qedf_ioreq *io_req,
 	    io_req->tm_flags == FCP_TMF_TGT_RESET) {
 		clear_bit(QEDF_CMD_OUTSTANDING, &io_req->flags);
 		io_req->sc_cmd = NULL;
+		kref_put(&io_req->refcount, qedf_release_cmd);
 		complete(&io_req->tm_done);
 	}
 
-- 
2.34.1

[PATCH 5.10 029/116] scsi: pm8001: Fix bogus FW crash for maxcpus=1

[Greg Kroah-Hartman]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 62afb379a0fee7e9c2f9f68e1abeb85ceddf51b9 ]

According to the comment in check_fw_ready() we should not check the
IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers.

However we check this very field in process_oq() for processing the highest
index interrupt vector. The highest interrupt vector is checked as the FW
is programmed to signal fatal errors through this irq.

Change that function to not check IOP1_READY for those mentioned
controllers, but do check ILA_READY in both cases.

The reason I assume that this was not hit earlier was because we always
allocated 64 MSI(X), and just did not pass the vector index check in
process_oq(), i.e.  the handler never ran for vector index 63.

Link: https://lore.kernel.org/r/1642508105-95432-1-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 16 ++++++++++++++--
 drivers/scsi/pm8001/pm80xx_hwi.h |  6 +++++-
 2 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index a203a4fc2674a..b22a8ab754faa 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4057,10 +4057,22 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
 	unsigned long flags;
 	u32 regval;
 
+	/*
+	 * Fatal errors are programmed to be signalled in irq vector
+	 * pm8001_ha->max_q_num - 1 through pm8001_ha->main_cfg_tbl.pm80xx_tbl.
+	 * fatal_err_interrupt
+	 */
 	if (vec == (pm8001_ha->max_q_num - 1)) {
+		u32 mipsall_ready;
+
+		if (pm8001_ha->chip_id == chip_8008 ||
+		    pm8001_ha->chip_id == chip_8009)
+			mipsall_ready = SCRATCH_PAD_MIPSALL_READY_8PORT;
+		else
+			mipsall_ready = SCRATCH_PAD_MIPSALL_READY_16PORT;
+
 		regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
-		if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
-					SCRATCH_PAD_MIPSALL_READY) {
+		if ((regval & mipsall_ready) != mipsall_ready) {
 			pm8001_ha->controller_fatal_error = true;
 			pm8001_dbg(pm8001_ha, FAIL,
 				   "Firmware Fatal error! Regval:0x%x\n",
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 701951a0f715b..0dfe9034f7e7f 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1391,8 +1391,12 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
 #define SCRATCH_PAD_BOOT_LOAD_SUCCESS	0x0
 #define SCRATCH_PAD_IOP0_READY		0xC00
 #define SCRATCH_PAD_IOP1_READY		0x3000
-#define SCRATCH_PAD_MIPSALL_READY	(SCRATCH_PAD_IOP1_READY | \
+#define SCRATCH_PAD_MIPSALL_READY_16PORT	(SCRATCH_PAD_IOP1_READY | \
 					SCRATCH_PAD_IOP0_READY | \
+					SCRATCH_PAD_ILA_READY | \
+					SCRATCH_PAD_RAAE_READY)
+#define SCRATCH_PAD_MIPSALL_READY_8PORT	(SCRATCH_PAD_IOP0_READY | \
+					SCRATCH_PAD_ILA_READY | \
 					SCRATCH_PAD_RAAE_READY)
 
 /* boot loader state */
-- 
2.34.1

[PATCH 5.10 030/116] scsi: ufs: Treat link loss as fatal error

[Greg Kroah-Hartman]

From: Kiwoong Kim <kwmad.kim@samsung.com>

[ Upstream commit c99b9b2301492b665b6e51ba6c06ec362eddcd10 ]

This event is raised when link is lost as specified in UFSHCI spec and that
means communication is not possible. Thus initializing UFS interface needs
to be done.

Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS
mask. This will trigger a host reset whenever a link lost interrupt occurs.

Link: https://lore.kernel.org/r/1642743475-54275-1-git-send-email-kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshci.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 6795e1f0e8f8c..1d999228efc85 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -138,7 +138,8 @@ enum {
 #define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
 				SYSTEM_BUS_FATAL_ERROR |\
-				CRYPTO_ENGINE_FATAL_ERROR)
+				CRYPTO_ENGINE_FATAL_ERROR |\
+				UIC_LINK_LOST)
 
 /* HCS - Host Controller Status 30h */
 #define DEVICE_PRESENT				0x1
-- 
2.34.1

[PATCH 5.10 031/116] scsi: myrs: Fix crash in error case

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 4db09593af0b0b4d7d4805ebb3273df51d7cc30d ]

In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails
with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and
crash the kernel.

[    1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A
[    1.105872] myrs 0000:00:03.0: Failed to initialize Controller
[    1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.110774] Call Trace:
[    1.110950]  myrs_cleanup+0xe4/0x150 [myrs]
[    1.111135]  myrs_probe.cold+0x91/0x56a [myrs]
[    1.111302]  ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs]
[    1.111500]  local_pci_probe+0x48/0x90

Link: https://lore.kernel.org/r/20220123225717.1069538-1-ztong0001@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/myrs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index 78c41bbf67562..e6a6678967e52 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -2272,7 +2272,8 @@ static void myrs_cleanup(struct myrs_hba *cs)
 	myrs_unmap(cs);
 
 	if (cs->mmio_base) {
-		cs->disable_intr(cs);
+		if (cs->disable_intr)
+			cs->disable_intr(cs);
 		iounmap(cs->mmio_base);
 		cs->mmio_base = NULL;
 	}
-- 
2.34.1

[PATCH 5.10 032/116] PM: hibernate: Remove register_nosave_region_late()

[Greg Kroah-Hartman]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 33569ef3c754a82010f266b7b938a66a3ccf90a4 ]

It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/suspend.h | 11 +----------
 kernel/power/snapshot.c | 21 +++++++--------------
 2 files changed, 8 insertions(+), 24 deletions(-)

diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 8af13ba60c7e4..c1310c571d805 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -430,15 +430,7 @@ struct platform_hibernation_ops {
 
 #ifdef CONFIG_HIBERNATION
 /* kernel/power/snapshot.c */
-extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
-static inline void __init register_nosave_region(unsigned long b, unsigned long e)
-{
-	__register_nosave_region(b, e, 0);
-}
-static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
-{
-	__register_nosave_region(b, e, 1);
-}
+extern void register_nosave_region(unsigned long b, unsigned long e);
 extern int swsusp_page_is_forbidden(struct page *);
 extern void swsusp_set_page_free(struct page *);
 extern void swsusp_unset_page_free(struct page *);
@@ -457,7 +449,6 @@ int pfn_is_nosave(unsigned long pfn);
 int hibernate_quiet_exec(int (*func)(void *data), void *data);
 #else /* CONFIG_HIBERNATION */
 static inline void register_nosave_region(unsigned long b, unsigned long e) {}
-static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 static inline void swsusp_set_page_free(struct page *p) {}
 static inline void swsusp_unset_page_free(struct page *p) {}
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 46b1804c1ddf7..1da013f50059a 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -944,8 +944,7 @@ static void memory_bm_recycle(struct memory_bitmap *bm)
  * Register a range of page frames the contents of which should not be saved
  * during hibernation (to be used in the early initialization code).
  */
-void __init __register_nosave_region(unsigned long start_pfn,
-				     unsigned long end_pfn, int use_kmalloc)
+void __init register_nosave_region(unsigned long start_pfn, unsigned long end_pfn)
 {
 	struct nosave_region *region;
 
@@ -961,18 +960,12 @@ void __init __register_nosave_region(unsigned long start_pfn,
 			goto Report;
 		}
 	}
-	if (use_kmalloc) {
-		/* During init, this shouldn't fail */
-		region = kmalloc(sizeof(struct nosave_region), GFP_KERNEL);
-		BUG_ON(!region);
-	} else {
-		/* This allocation cannot fail */
-		region = memblock_alloc(sizeof(struct nosave_region),
-					SMP_CACHE_BYTES);
-		if (!region)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(struct nosave_region));
-	}
+	/* This allocation cannot fail */
+	region = memblock_alloc(sizeof(struct nosave_region),
+				SMP_CACHE_BYTES);
+	if (!region)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(struct nosave_region));
 	region->start_pfn = start_pfn;
 	region->end_pfn = end_pfn;
 	list_add_tail(&region->list, &nosave_regions);
-- 
2.34.1

[PATCH 5.10 033/116] usb: dwc2: gadget: dont try to disable ep0 in dwc2_hsotg_suspend

[Greg Kroah-Hartman]

From: Amelie Delaunay <amelie.delaunay@foss.st.com>

[ Upstream commit ac55d163855924aa5af9f1560977da8f346963c8 ]

Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following
logs before returning -EINVAL:
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0

To avoid these two logs while suspending, start disabling the endpoint
from the index 1, as done in dwc2_hsotg_udc_stop:

	/* all endpoints should be shutdown */
	for (ep = 1; ep < hsotg->num_of_eps; ep++) {
		if (hsotg->eps_in[ep])
			dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
		if (hsotg->eps_out[ep])
			dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
	}

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 449f19c3633c2..ec54971063f8f 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -5032,7 +5032,7 @@ int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg)
 		hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 
-		for (ep = 0; ep < hsotg->num_of_eps; ep++) {
+		for (ep = 1; ep < hsotg->num_of_eps; ep++) {
 			if (hsotg->eps_in[ep])
 				dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
 			if (hsotg->eps_out[ep])
-- 
2.34.1

[PATCH 5.10 034/116] perf: Always wake the parent event

[Greg Kroah-Hartman]

From: James Clark <james.clark@arm.com>

[ Upstream commit 961c39121759ad09a89598ec4ccdd34ae0468a19 ]

When using per-process mode and event inheritance is set to true,
forked processes will create a new perf events via inherit_event() ->
perf_event_alloc(). But these events will not have ring buffers
assigned to them. Any call to wakeup will be dropped if it's called on
an event with no ring buffer assigned because that's the object that
holds the wakeup list.

If the child event is disabled due to a call to
perf_aux_output_begin() or perf_aux_output_end(), the wakeup is
dropped leaving userspace hanging forever on the poll.

Normally the event is explicitly re-enabled by userspace after it
wakes up to read the aux data, but in this case it does not get woken
up so the event remains disabled.

This can be reproduced when using Arm SPE and 'stress' which forks once
before running the workload. By looking at the list of aux buffers read,
it's apparent that they stop after the fork:

  perf record -e arm_spe// -vvv -- stress -c 1

With this patch applied they continue to be printed. This behaviour
doesn't happen when using systemwide or per-cpu mode.

Reported-by: Ruben Ayrapetyan <Ruben.Ayrapetyan@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211206113840.130802-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index c6493f7e02359..6d3a67bef3951 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5877,6 +5877,8 @@ static void ring_buffer_attach(struct perf_event *event,
 	struct perf_buffer *old_rb = NULL;
 	unsigned long flags;
 
+	WARN_ON_ONCE(event->parent);
+
 	if (event->rb) {
 		/*
 		 * Should be impossible, we set this when removing
@@ -5934,6 +5936,9 @@ static void ring_buffer_wakeup(struct perf_event *event)
 {
 	struct perf_buffer *rb;
 
+	if (event->parent)
+		event = event->parent;
+
 	rcu_read_lock();
 	rb = rcu_dereference(event->rb);
 	if (rb) {
@@ -5947,6 +5952,9 @@ struct perf_buffer *ring_buffer_get(struct perf_event *event)
 {
 	struct perf_buffer *rb;
 
+	if (event->parent)
+		event = event->parent;
+
 	rcu_read_lock();
 	rb = rcu_dereference(event->rb);
 	if (rb) {
@@ -6618,7 +6626,7 @@ static unsigned long perf_prepare_sample_aux(struct perf_event *event,
 	if (WARN_ON_ONCE(READ_ONCE(sampler->oncpu) != smp_processor_id()))
 		goto out;
 
-	rb = ring_buffer_get(sampler->parent ? sampler->parent : sampler);
+	rb = ring_buffer_get(sampler);
 	if (!rb)
 		goto out;
 
@@ -6684,7 +6692,7 @@ static void perf_aux_sample_output(struct perf_event *event,
 	if (WARN_ON_ONCE(!sampler || !data->aux_size))
 		return;
 
-	rb = ring_buffer_get(sampler->parent ? sampler->parent : sampler);
+	rb = ring_buffer_get(sampler);
 	if (!rb)
 		return;
 
-- 
2.34.1

[PATCH 5.10 035/116] nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs

[Greg Kroah-Hartman]

From: Wu Zheng <wu.zheng@intel.com>

[ Upstream commit 25e58af4be412d59e056da65cc1cefbd89185bd2 ]

The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.

Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.

Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 1b85349f57af0..97afeb898b253 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3198,7 +3198,8 @@ static const struct pci_device_id nvme_id_table[] = {
 				NVME_QUIRK_DEALLOCATE_ZEROES, },
 	{ PCI_VDEVICE(INTEL, 0x0a54),	/* Intel P4500/P4600 */
 		.driver_data = NVME_QUIRK_STRIPE_SIZE |
-				NVME_QUIRK_DEALLOCATE_ZEROES, },
+				NVME_QUIRK_DEALLOCATE_ZEROES |
+				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_VDEVICE(INTEL, 0x0a55),	/* Dell Express Flash P4600 */
 		.driver_data = NVME_QUIRK_STRIPE_SIZE |
 				NVME_QUIRK_DEALLOCATE_ZEROES, },
-- 
2.34.1

[PATCH 5.10 036/116] net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()

[Greg Kroah-Hartman]

From: Jisheng Zhang <jszhang@kernel.org>

[ Upstream commit 9e0db41e7a0b6f1271cbcfb16dbf5b8641b4e440 ]

When readl_poll_timeout() timeout, we'd better directly use its return
value.

Before this patch:
[    2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14

After this patch:
[    2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 9f5ccf1a0a540..cad6588840d8b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -734,7 +734,7 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv)
 
 	if (err) {
 		dev_err(priv->device, "EMAC reset timeout\n");
-		return -EFAULT;
+		return err;
 	}
 	return 0;
 }
-- 
2.34.1

[PATCH 5.10 037/116] KVM: eventfd: Fix false positive RCU usage warning

[Greg Kroah-Hartman]

From: Hou Wenlong <houwenlong93@linux.alibaba.com>

[ Upstream commit 6a0c61703e3a5d67845a4b275e1d9d7bc1b5aad7 ]

Fix the following false positive warning:
 =============================
 WARNING: suspicious RCU usage
 5.16.0-rc4+ #57 Not tainted
 -----------------------------
 arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 3 locks held by fc_vcpu 0/330:
  #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm]
  #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm]
  #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm]

 stack backtrace:
 CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x44/0x57
  kvm_notify_acked_gsi+0x6b/0x70 [kvm]
  kvm_notify_acked_irq+0x8d/0x180 [kvm]
  kvm_ioapic_update_eoi+0x92/0x240 [kvm]
  kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm]
  handle_apic_eoi_induced+0x3d/0x60 [kvm_intel]
  vmx_handle_exit+0x19c/0x6a0 [kvm_intel]
  vcpu_enter_guest+0x66e/0x1860 [kvm]
  kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm]
  kvm_vcpu_ioctl+0x38a/0x6f0 [kvm]
  __x64_sys_ioctl+0x89/0xc0
  do_syscall_64+0x3a/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu),
kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact,
kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it
a false positive warning. So use hlist_for_each_entry_srcu() instead of
hlist_for_each_entry_rcu().

Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/eventfd.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index c2323c27a28b5..518cd8dc390e2 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -451,8 +451,8 @@ bool kvm_irq_has_notifier(struct kvm *kvm, unsigned irqchip, unsigned pin)
 	idx = srcu_read_lock(&kvm->irq_srcu);
 	gsi = kvm_irq_map_chip_pin(kvm, irqchip, pin);
 	if (gsi != -1)
-		hlist_for_each_entry_rcu(kian, &kvm->irq_ack_notifier_list,
-					 link)
+		hlist_for_each_entry_srcu(kian, &kvm->irq_ack_notifier_list,
+					  link, srcu_read_lock_held(&kvm->irq_srcu))
 			if (kian->gsi == gsi) {
 				srcu_read_unlock(&kvm->irq_srcu, idx);
 				return true;
@@ -468,8 +468,8 @@ void kvm_notify_acked_gsi(struct kvm *kvm, int gsi)
 {
 	struct kvm_irq_ack_notifier *kian;
 
-	hlist_for_each_entry_rcu(kian, &kvm->irq_ack_notifier_list,
-				 link)
+	hlist_for_each_entry_srcu(kian, &kvm->irq_ack_notifier_list,
+				  link, srcu_read_lock_held(&kvm->irq_srcu))
 		if (kian->gsi == gsi)
 			kian->irq_acked(kian);
 }
-- 
2.34.1

[PATCH 5.10 038/116] KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER

[Greg Kroah-Hartman]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 7a601e2cf61558dfd534a9ecaad09f5853ad8204 ]

Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field,
PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes
sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too.

Note, none of the currently existing Windows/Hyper-V versions are known
to enable 'save VMX-preemption timer value' when eVMCS is in use, the
change is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/evmcs.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
index bd41d9462355f..011929a638230 100644
--- a/arch/x86/kvm/vmx/evmcs.h
+++ b/arch/x86/kvm/vmx/evmcs.h
@@ -59,7 +59,9 @@ DECLARE_STATIC_KEY_FALSE(enable_evmcs);
 	 SECONDARY_EXEC_SHADOW_VMCS |					\
 	 SECONDARY_EXEC_TSC_SCALING |					\
 	 SECONDARY_EXEC_PAUSE_LOOP_EXITING)
-#define EVMCS1_UNSUPPORTED_VMEXIT_CTRL (VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL)
+#define EVMCS1_UNSUPPORTED_VMEXIT_CTRL					\
+	(VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |				\
+	 VM_EXIT_SAVE_VMX_PREEMPTION_TIMER)
 #define EVMCS1_UNSUPPORTED_VMENTRY_CTRL (VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
 #define EVMCS1_UNSUPPORTED_VMFUNC (VMX_VMFUNC_EPTP_SWITCHING)
 
-- 
2.34.1

[PATCH 5.10 039/116] KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS

[Greg Kroah-Hartman]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit f80ae0ef089a09e8c18da43a382c3caac9a424a7 ]

Similar to MSR_IA32_VMX_EXIT_CTLS/MSR_IA32_VMX_TRUE_EXIT_CTLS,
MSR_IA32_VMX_ENTRY_CTLS/MSR_IA32_VMX_TRUE_ENTRY_CTLS pair,
MSR_IA32_VMX_TRUE_PINBASED_CTLS needs to be filtered the same way
MSR_IA32_VMX_PINBASED_CTLS is currently filtered as guests may solely rely
on 'true' MSR data.

Note, none of the currently existing Windows/Hyper-V versions are known
to stumble upon the unfiltered MSR_IA32_VMX_TRUE_PINBASED_CTLS, the change
is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/evmcs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
index c0d6fee9225fe..5b68034ec5f9c 100644
--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@@ -361,6 +361,7 @@ void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata)
 	case MSR_IA32_VMX_PROCBASED_CTLS2:
 		ctl_high &= ~EVMCS1_UNSUPPORTED_2NDEXEC;
 		break;
+	case MSR_IA32_VMX_TRUE_PINBASED_CTLS:
 	case MSR_IA32_VMX_PINBASED_CTLS:
 		ctl_high &= ~EVMCS1_UNSUPPORTED_PINCTRL;
 		break;
-- 
2.34.1

[PATCH 5.10 040/116] KVM: SVM: Dont kill SEV guest if SMAP erratum triggers in usermode

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

[ Upstream commit cdf85e0c5dc766fc7fc779466280e454a6d04f87 ]

Inject a #GP instead of synthesizing triple fault to try to avoid killing
the guest if emulation of an SEV guest fails due to encountering the SMAP
erratum.  The injected #GP may still be fatal to the guest, e.g. if the
userspace process is providing critical functionality, but KVM should
make every attempt to keep the guest alive.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/svm/svm.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index fa543c355fbdb..d515c8e68314c 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4155,7 +4155,21 @@ static bool svm_can_emulate_instruction(struct kvm_vcpu *vcpu, void *insn, int i
 			return true;
 
 		pr_err_ratelimited("KVM: SEV Guest triggered AMD Erratum 1096\n");
-		kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
+
+		/*
+		 * If the fault occurred in userspace, arbitrarily inject #GP
+		 * to avoid killing the guest and to hopefully avoid confusing
+		 * the guest kernel too much, e.g. injecting #PF would not be
+		 * coherent with respect to the guest's page tables.  Request
+		 * triple fault if the fault occurred in the kernel as there's
+		 * no fault that KVM can inject without confusing the guest.
+		 * In practice, the triple fault is moot as no sane SEV kernel
+		 * will execute from user memory while also running with SMAP=1.
+		 */
+		if (is_user)
+			kvm_inject_gp(vcpu, 0);
+		else
+			kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 	}
 
 	return false;
-- 
2.34.1

[PATCH 5.10 041/116] KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

[ Upstream commit b9bed78e2fa9571b7c983b20666efa0009030c71 ]

Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step
breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or
MOVSS blocking is active.  Setting the flag is necessary to make VM-Entry
consistency checks happy, as VMX has an invariant that if RFLAGS.TF is
set and STI/MOVSS blocking is true, then the previous instruction must
have been STI or MOV/POP, and therefore a single-step #DB must be pending
since the RFLAGS.TF cannot have been set by the previous instruction,
i.e. the one instruction delay after setting RFLAGS.TF must have already
expired.

Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately
when recording guest state as part of a VM-Exit, but #DB VM-Exits
intentionally do not treat the #DB as "guest state" as interception of
the #DB effectively makes the #DB host-owned, thus KVM needs to manually
set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest.

Note, although this bug can be triggered by guest userspace, doing so
requires IOPL=3, and guest userspace running with IOPL=3 has full access
to all I/O ports (from the guest's perspective) and can crash/reboot the
guest any number of ways.  IOPL=3 is required because STI blocking kicks
in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either
takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF.

MOVSS blocking can be initiated by userspace, but can be coincident with
a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is
executed in the MOVSS shadow.  MOV DR #GPs at CPL>0, thus MOVSS blocking
is problematic only for CPL0 (and only if the guest is crazy enough to
access a DR in a MOVSS shadow).  All other sources of #DBs are either
suppressed by MOVSS blocking (single-step, code fetch, data, and I/O),
are mutually exclusive with MOVSS blocking (T-bit task switch), or are
already handled by KVM (ICEBP, a.k.a. INT1).

This bug was originally found by running tests[1] created for XSA-308[2].
Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is
presumably why the Xen bug was deemed to be an exploitable DOS from guest
userspace.  KVM already handles ICEBP by skipping the ICEBP instruction
and thus clears MOVSS blocking as a side effect of its "emulation".

[1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html
[2] https://xenbits.xen.org/xsa/advisory-308.html

Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Alexander Graf <graf@amazon.de>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220120000624.655815-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/vmx.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 351ef5cf1436a..94f5f2129e3b4 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -4846,8 +4846,33 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
 		dr6 = vmx_get_exit_qual(vcpu);
 		if (!(vcpu->guest_debug &
 		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
+			/*
+			 * If the #DB was due to ICEBP, a.k.a. INT1, skip the
+			 * instruction.  ICEBP generates a trap-like #DB, but
+			 * despite its interception control being tied to #DB,
+			 * is an instruction intercept, i.e. the VM-Exit occurs
+			 * on the ICEBP itself.  Note, skipping ICEBP also
+			 * clears STI and MOVSS blocking.
+			 *
+			 * For all other #DBs, set vmcs.PENDING_DBG_EXCEPTIONS.BS
+			 * if single-step is enabled in RFLAGS and STI or MOVSS
+			 * blocking is active, as the CPU doesn't set the bit
+			 * on VM-Exit due to #DB interception.  VM-Entry has a
+			 * consistency check that a single-step #DB is pending
+			 * in this scenario as the previous instruction cannot
+			 * have toggled RFLAGS.TF 0=>1 (because STI and POP/MOV
+			 * don't modify RFLAGS), therefore the one instruction
+			 * delay when activating single-step breakpoints must
+			 * have already expired.  Note, the CPU sets/clears BS
+			 * as appropriate for all other VM-Exits types.
+			 */
 			if (is_icebp(intr_info))
 				WARN_ON(!skip_emulated_instruction(vcpu));
+			else if ((vmx_get_rflags(vcpu) & X86_EFLAGS_TF) &&
+				 (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+				  (GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS)))
+				vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS,
+					    vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS) | DR6_BS);
 
 			kvm_queue_exception_p(vcpu, DB_VECTOR, dr6);
 			return 1;
-- 
2.34.1

[PATCH 5.10 042/116] riscv: fix build with binutils 2.38

[Greg Kroah-Hartman]

From: Aurelien Jarno <aurelien@aurel32.net>

commit 6df2a016c0c8a3d0933ef33dd192ea6606b115e3 upstream.

>From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:

  CC      arch/riscv/kernel/vdso/vgettimeofday.o
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages:
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'

The fix is to specify those extensions explicitely in -march. However as
older binutils version do not support this, we first need to detect
that.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/Makefile |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -50,6 +50,12 @@ riscv-march-$(CONFIG_ARCH_RV32I)	:= rv32
 riscv-march-$(CONFIG_ARCH_RV64I)	:= rv64ima
 riscv-march-$(CONFIG_FPU)		:= $(riscv-march-y)fd
 riscv-march-$(CONFIG_RISCV_ISA_C)	:= $(riscv-march-y)c
+
+# Newer binutils versions default to ISA spec version 20191213 which moves some
+# instructions from the I extension to the Zicsr and Zifencei extensions.
+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
+riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei
+
 KBUILD_CFLAGS += -march=$(subst fd,,$(riscv-march-y))
 KBUILD_AFLAGS += -march=$(riscv-march-y)
 

[PATCH 5.10 043/116] ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

commit 42c9b28e6862d16db82a56f5667cf4d1f6658cf6 upstream.

Currently, SD card fails to mount due to the following pinctrl error:

[   11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi
[   11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22
[   11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0  on device 80018000.pinctrl
[   11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back

Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it
is already been used by the mmc0-pins-fixup pinctrl group.

With this change the rootfs can be mounted and the imx23-evk board can
boot successfully.

Cc: <stable@vger.kernel.org>
Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/imx23-evk.dts |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;

[PATCH 5.10 044/116] ARM: dts: Fix boot regression on Skomer

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

commit d9058d6a0e92d8e4a00855f8fe204792f42794db upstream.

The signal routing on the Skomer board was incorrect making
it impossible to mount root from the SD card. Fix this up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: Stefan Hansson <newbyte@disroot.org>
Link: https://lore.kernel.org/r/20220205235312.446730-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts |    4 ----
 1 file changed, 4 deletions(-)

--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -154,10 +154,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;

[PATCH 5.10 045/116] ARM: socfpga: fix missing RESET_CONTROLLER

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 3037b174b1876aae6b2d1a27a878c681c78ccadc upstream.

The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly.  Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:

  /usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
  arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'

Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-socfpga/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -18,6 +19,7 @@ menuconfig ARCH_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_SOCFPGA
 config SOCFPGA_SUSPEND

[PATCH 5.10 046/116] nvme-tcp: fix bogus request completion when failing to send AER

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

commit 63573807b27e0faf8065a28b1bbe1cbfb23c0130 upstream.

AER is not backed by a real request, hence we should not incorrectly
assume that when failing to send a nvme command, it is a normal request
but rather check if this is an aer and if so complete the aer (similar
to the normal completion path).

Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/tcp.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -904,7 +904,15 @@ static inline void nvme_tcp_done_send_re
 
 static void nvme_tcp_fail_request(struct nvme_tcp_request *req)
 {
-	nvme_tcp_end_request(blk_mq_rq_from_pdu(req), NVME_SC_HOST_PATH_ERROR);
+	if (nvme_tcp_async_req(req)) {
+		union nvme_result res = {};
+
+		nvme_complete_async_event(&req->queue->ctrl->ctrl,
+				cpu_to_le16(NVME_SC_HOST_PATH_ERROR), &res);
+	} else {
+		nvme_tcp_end_request(blk_mq_rq_from_pdu(req),
+				NVME_SC_HOST_PATH_ERROR);
+	}
 }
 
 static int nvme_tcp_try_send_data(struct nvme_tcp_request *req)

[PATCH 5.10 047/116] ACPI/IORT: Check node revision for PMCG resources

[Greg Kroah-Hartman]

From: Robin Murphy <robin.murphy@arm.com>

commit da5fb9e1ad3fbf632dce735f1bdad257ca528499 upstream.

The original version of the IORT PMCG definition had an oversight
wherein there was no way to describe the second register page for an
implementation using the recommended RELOC_CTRS feature. Although the
spec was fixed, and the final patches merged to ACPICA and Linux written
against the new version, it seems that some old firmware based on the
original revision has survived and turned up in the wild.

Add a check for the original PMCG definition, and avoid filling in the
second memory resource with nonsense if so. Otherwise it is likely that
something horrible will happen when the PMCG driver attempts to probe.

Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG")
Cc: <stable@vger.kernel.org> # 5.2.x
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/75628ae41c257fb73588f7bf1c4459160e04be2b.1643916258.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/arm64/iort.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1454,9 +1454,17 @@ static void __init arm_smmu_v3_pmcg_init
 	res[0].start = pmcg->page0_base_address;
 	res[0].end = pmcg->page0_base_address + SZ_4K - 1;
 	res[0].flags = IORESOURCE_MEM;
-	res[1].start = pmcg->page1_base_address;
-	res[1].end = pmcg->page1_base_address + SZ_4K - 1;
-	res[1].flags = IORESOURCE_MEM;
+	/*
+	 * The initial version in DEN0049C lacked a way to describe register
+	 * page 1, which makes it broken for most PMCG implementations; in
+	 * that case, just let the driver fail gracefully if it expects to
+	 * find a second memory resource.
+	 */
+	if (node->revision > 0) {
+		res[1].start = pmcg->page1_base_address;
+		res[1].end = pmcg->page1_base_address + SZ_4K - 1;
+		res[1].flags = IORESOURCE_MEM;
+	}
 
 	if (pmcg->overflow_gsiv)
 		acpi_iort_register_irq(pmcg->overflow_gsiv, "overflow",

[PATCH 5.10 048/116] PM: s2idle: ACPI: Fix wakeup interrupts handling

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit cb1f65c1e1424a4b5e4a86da8aa3b8fd8459c8ec upstream.

After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed.  Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.

The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop().  However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.

To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup.  Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one.  [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]

Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/sleep.c        |    1 +
 drivers/base/power/wakeup.c |   41 ++++++++++++++++++++++++++++++++++-------
 include/linux/suspend.h     |    4 ++--
 kernel/power/main.c         |    5 ++++-
 kernel/power/process.c      |    2 +-
 kernel/power/suspend.c      |    2 --
 6 files changed, 42 insertions(+), 13 deletions(-)

--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -1040,6 +1040,7 @@ static bool acpi_s2idle_wake(void)
 			return true;
 		}
 
+		pm_wakeup_clear(acpi_sci_irq);
 		rearm_wake_irq(acpi_sci_irq);
 	}
 
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -34,7 +34,8 @@ suspend_state_t pm_suspend_target_state;
 bool events_check_enabled __read_mostly;
 
 /* First wakeup IRQ seen by the kernel in the last cycle. */
-unsigned int pm_wakeup_irq __read_mostly;
+static unsigned int wakeup_irq[2] __read_mostly;
+static DEFINE_RAW_SPINLOCK(wakeup_irq_lock);
 
 /* If greater than 0 and the system is suspending, terminate the suspend. */
 static atomic_t pm_abort_suspend __read_mostly;
@@ -941,19 +942,45 @@ void pm_system_cancel_wakeup(void)
 	atomic_dec_if_positive(&pm_abort_suspend);
 }
 
-void pm_wakeup_clear(bool reset)
+void pm_wakeup_clear(unsigned int irq_number)
 {
-	pm_wakeup_irq = 0;
-	if (reset)
+	raw_spin_lock_irq(&wakeup_irq_lock);
+
+	if (irq_number && wakeup_irq[0] == irq_number)
+		wakeup_irq[0] = wakeup_irq[1];
+	else
+		wakeup_irq[0] = 0;
+
+	wakeup_irq[1] = 0;
+
+	raw_spin_unlock_irq(&wakeup_irq_lock);
+
+	if (!irq_number)
 		atomic_set(&pm_abort_suspend, 0);
 }
 
 void pm_system_irq_wakeup(unsigned int irq_number)
 {
-	if (pm_wakeup_irq == 0) {
-		pm_wakeup_irq = irq_number;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&wakeup_irq_lock, flags);
+
+	if (wakeup_irq[0] == 0)
+		wakeup_irq[0] = irq_number;
+	else if (wakeup_irq[1] == 0)
+		wakeup_irq[1] = irq_number;
+	else
+		irq_number = 0;
+
+	raw_spin_unlock_irqrestore(&wakeup_irq_lock, flags);
+
+	if (irq_number)
 		pm_system_wakeup();
-	}
+}
+
+unsigned int pm_wakeup_irq(void)
+{
+	return wakeup_irq[0];
 }
 
 /**
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -496,14 +496,14 @@ extern void ksys_sync_helper(void);
 
 /* drivers/base/power/wakeup.c */
 extern bool events_check_enabled;
-extern unsigned int pm_wakeup_irq;
 extern suspend_state_t pm_suspend_target_state;
 
 extern bool pm_wakeup_pending(void);
 extern void pm_system_wakeup(void);
 extern void pm_system_cancel_wakeup(void);
-extern void pm_wakeup_clear(bool reset);
+extern void pm_wakeup_clear(unsigned int irq_number);
 extern void pm_system_irq_wakeup(unsigned int irq_number);
+extern unsigned int pm_wakeup_irq(void);
 extern bool pm_get_wakeup_count(unsigned int *count, bool block);
 extern bool pm_save_wakeup_count(unsigned int count);
 extern void pm_wakep_autosleep_enabled(bool set);
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -504,7 +504,10 @@ static ssize_t pm_wakeup_irq_show(struct
 					struct kobj_attribute *attr,
 					char *buf)
 {
-	return pm_wakeup_irq ? sprintf(buf, "%u\n", pm_wakeup_irq) : -ENODATA;
+	if (!pm_wakeup_irq())
+		return -ENODATA;
+
+	return sprintf(buf, "%u\n", pm_wakeup_irq());
 }
 
 power_attr_ro(pm_wakeup_irq);
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -134,7 +134,7 @@ int freeze_processes(void)
 	if (!pm_freezing)
 		atomic_inc(&system_freezing_cnt);
 
-	pm_wakeup_clear(true);
+	pm_wakeup_clear(0);
 	pr_info("Freezing user space processes ... ");
 	pm_freezing = true;
 	error = try_to_freeze_tasks(true);
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -138,8 +138,6 @@ static void s2idle_loop(void)
 			break;
 		}
 
-		pm_wakeup_clear(false);
-
 		s2idle_enter();
 	}
 

[PATCH 5.10 049/116] drm/rockchip: vop: Correct RK3399 VOP register fields

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit 9da1e9ab82c92d0e89fe44cad2cd7c2d18d64070 upstream.

Commit 7707f7227f09 ("drm/rockchip: Add support for afbc") switched up
the rk3399_vop_big[] register windows, but it did so incorrectly.

The biggest problem is in rk3288_win23_data[] vs.
rk3368_win23_data[] .format field:

  RK3288's format: VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1)
  RK3368's format: VOP_REG(RK3368_WIN2_CTRL0, 0x3, 5)

Bits 5:6 (i.e., shift 5, mask 0x3) are correct for RK3399, according to
the TRM.

There are a few other small differences between the 3288 and 3368
definitions that were swapped in commit 7707f7227f09. I reviewed them to
the best of my ability according to the RK3399 TRM and fixed them up.

This fixes IOMMU issues (and display errors) when testing with BG24
color formats.

Fixes: 7707f7227f09 ("drm/rockchip: Add support for afbc")
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119161104.1.I1d01436bef35165a8cdfe9308789c0badb5ff46a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -873,6 +873,7 @@ static const struct vop_win_phy rk3399_w
 	.enable = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 0),
 	.format = VOP_REG(RK3288_WIN0_CTRL0, 0x7, 1),
 	.rb_swap = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 12),
+	.x_mir_en = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 21),
 	.y_mir_en = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 22),
 	.act_info = VOP_REG(RK3288_WIN0_ACT_INFO, 0x1fff1fff, 0),
 	.dsp_info = VOP_REG(RK3288_WIN0_DSP_INFO, 0x0fff0fff, 0),
@@ -883,6 +884,7 @@ static const struct vop_win_phy rk3399_w
 	.uv_vir = VOP_REG(RK3288_WIN0_VIR, 0x3fff, 16),
 	.src_alpha_ctl = VOP_REG(RK3288_WIN0_SRC_ALPHA_CTRL, 0xff, 0),
 	.dst_alpha_ctl = VOP_REG(RK3288_WIN0_DST_ALPHA_CTRL, 0xff, 0),
+	.channel = VOP_REG(RK3288_WIN0_CTRL2, 0xff, 0),
 };
 
 /*
@@ -893,11 +895,11 @@ static const struct vop_win_phy rk3399_w
 static const struct vop_win_data rk3399_vop_win_data[] = {
 	{ .base = 0x00, .phy = &rk3399_win01_data,
 	  .type = DRM_PLANE_TYPE_PRIMARY },
-	{ .base = 0x40, .phy = &rk3288_win01_data,
+	{ .base = 0x40, .phy = &rk3368_win01_data,
 	  .type = DRM_PLANE_TYPE_OVERLAY },
-	{ .base = 0x00, .phy = &rk3288_win23_data,
+	{ .base = 0x00, .phy = &rk3368_win23_data,
 	  .type = DRM_PLANE_TYPE_OVERLAY },
-	{ .base = 0x50, .phy = &rk3288_win23_data,
+	{ .base = 0x50, .phy = &rk3368_win23_data,
 	  .type = DRM_PLANE_TYPE_CURSOR },
 };
 

[PATCH 5.10 050/116] ARM: dts: Fix timer regression for beagleboard revision c

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ]

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.

Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.

Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.

Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/arm/omap/omap.txt     |  3 ++
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/omap3-beagle-ab4.dts        | 47 +++++++++++++++++++
 arch/arm/boot/dts/omap3-beagle.dts            | 33 -------------
 drivers/clocksource/timer-ti-dm-systimer.c    |  2 +-
 5 files changed, 52 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c6..fa8b31660cadd 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ce66ffd5a1bbc..7e8151681597c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -731,6 +731,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 0000000000000..990ff2d846868
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e91..0548b391334fd 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@ &usbhsehci {
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index b6f97960d8ee0..5c40ca1d4740e 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -241,7 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void)
 	bool quirk_unreliable_oscillator = false;
 
 	/* Quirk unreliable 32 KiHz oscillator with incomplete dts */
-	if (of_machine_is_compatible("ti,omap3-beagle") ||
+	if (of_machine_is_compatible("ti,omap3-beagle-ab4") ||
 	    of_machine_is_compatible("timll,omap3-devkit8000")) {
 		quirk_unreliable_oscillator = true;
 		counter_32k = -ENODEV;
-- 
2.34.1

[PATCH 5.10 051/116] ARM: dts: meson: Fix the UART compatible strings

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 5225e1b87432dcf0d0fc3440824b91d04c1d6cc1 ]

The dt-bindings for the UART controller only allow the following values
for Meson6 SoCs:
- "amlogic,meson6-uart", "amlogic,meson-ao-uart"
- "amlogic,meson6-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Fixes: ec9b59162fd831 ("ARM: dts: meson6: use stable UART bindings")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 7649dd1e0b9ee..c928ae312e19c 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -42,14 +42,14 @@ hwrng: rng@8100 {
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -87,7 +87,7 @@ saradc: adc@8680 {
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -203,7 +203,7 @@ ir_receiver: ir-receiver@480 {
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
-- 
2.34.1

[PATCH 5.10 052/116] ARM: dts: meson8: Fix the UART device-tree schema validation

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 57007bfb5469ba31cacf69d52195e8b75f43e32d ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml schema.

Fixes: 6ca77502050eff ("ARM: dts: meson8: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 740a6c816266c..08533116a39ce 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -598,27 +598,27 @@ &timer_abcde {
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
-- 
2.34.1

[PATCH 5.10 053/116] ARM: dts: meson8b: Fix the UART device-tree schema validation

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 3375aa77135f6aeb1107ed839a2050a4118444bc ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8b-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8b-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml bindings.

Fixes: b02d6e73f5fc96 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 2401cdf5f7511..f6eb7c803174e 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -586,27 +586,27 @@ &timer_abcde {
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
-- 
2.34.1

[PATCH 5.10 054/116] staging: fbtft: Fix error path in fbtft_driver_module_init()

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 426aca16e903b387a0b0001d62207a745c67cfd3 ]

If registering the platform driver fails, the function must not return
without undoing the spi driver registration first.

Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220118181338.207943-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fbtft/fbtft.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h
index 76f8c090a8370..06afaa9d505ba 100644
--- a/drivers/staging/fbtft/fbtft.h
+++ b/drivers/staging/fbtft/fbtft.h
@@ -332,7 +332,10 @@ static int __init fbtft_driver_module_init(void)                           \
 	ret = spi_register_driver(&fbtft_driver_spi_driver);               \
 	if (ret < 0)                                                       \
 		return ret;                                                \
-	return platform_driver_register(&fbtft_driver_platform_driver);    \
+	ret = platform_driver_register(&fbtft_driver_platform_driver);     \
+	if (ret < 0)                                                       \
+		spi_unregister_driver(&fbtft_driver_spi_driver);           \
+	return ret;                                                        \
 }                                                                          \
 									   \
 static void __exit fbtft_driver_module_exit(void)                          \
-- 
2.34.1

[PATCH 5.10 055/116] ARM: dts: imx6qdl-udoo: Properly describe the SD card detect

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 993d66140f8d1c1853a3b58b77b43b681eb64dee ]

GPIO7_IO00 is used as SD card detect.

Properly describe this in the devicetree.

Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-udoo.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d2..ccfa8e320be62 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@ &usbotg {
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
-- 
2.34.1

[PATCH 5.10 056/116] phy: xilinx: zynqmp: Fix bus width setting for SGMII

[Greg Kroah-Hartman]

From: Robert Hancock <robert.hancock@calian.com>

[ Upstream commit 37291f60d0822f191748c2a54ce63b0bc669020f ]

TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with
separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was
not preserving the existing register value for other lanes, so enabling
the PHY in SGMII mode on one lane zeroed out the settings for all other
lanes, causing other PS-GTR peripherals such as USB3 to malfunction.

Use xpsgtr_clr_set to only manipulate the desired bits in the register.

Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/xilinx/phy-zynqmp.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index 2b0f921b6ee3d..b8ccac6f31467 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -134,7 +134,8 @@
 #define PROT_BUS_WIDTH_10		0x0
 #define PROT_BUS_WIDTH_20		0x1
 #define PROT_BUS_WIDTH_40		0x2
-#define PROT_BUS_WIDTH_SHIFT		2
+#define PROT_BUS_WIDTH_SHIFT(n)		((n) * 2)
+#define PROT_BUS_WIDTH_MASK(n)		GENMASK((n) * 2 + 1, (n) * 2)
 
 /* Number of GT lanes */
 #define NUM_LANES			4
@@ -443,12 +444,12 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
 static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
 {
 	struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+	u32 mask = PROT_BUS_WIDTH_MASK(gtr_phy->lane);
+	u32 val = PROT_BUS_WIDTH_10 << PROT_BUS_WIDTH_SHIFT(gtr_phy->lane);
 
 	/* Set SGMII protocol TX and RX bus width to 10 bits. */
-	xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
-		     PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
-	xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
-		     PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
+	xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val);
+	xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val);
 
 	xpsgtr_bypass_scrambler_8b10b(gtr_phy);
 }
-- 
2.34.1

[PATCH 5.10 057/116] ARM: dts: imx7ulp: Fix assigned-clocks-parents typo

[Greg Kroah-Hartman]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 6d58c5e21a3fe355ce6d1808e96d02a610265218 ]

The correct property name is 'assigned-clock-parents', not
'assigned-clocks-parents'. Though if the platform works with the typo, one
has to wonder if the property is even needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Fixes: 8b8c7d97e2c7 ("ARM: dts: imx7ulp: Add wdog1 node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7ulp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55c..bcec98b964114 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@ wdog1: watchdog@403d0000 {
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
-- 
2.34.1

[PATCH 5.10 058/116] usb: f_fs: Fix use-after-free for epfile

[Greg Kroah-Hartman]

From: Udipto Goswami <quic_ugoswami@quicinc.com>

[ Upstream commit ebe2b1add1055b903e2acd86b290a85297edc0b3 ]

Consider a case where ffs_func_eps_disable is called from
ffs_func_disable as part of composition switch and at the
same time ffs_epfile_release get called from userspace.
ffs_epfile_release will free up the read buffer and call
ffs_data_closed which in turn destroys ffs->epfiles and
mark it as NULL. While this was happening the driver has
already initialized the local epfile in ffs_func_eps_disable
which is now freed and waiting to acquire the spinlock. Once
spinlock is acquired the driver proceeds with the stale value
of epfile and tries to free the already freed read buffer
causing use-after-free.

Following is the illustration of the race:

      CPU1                                  CPU2

   ffs_func_eps_disable
   epfiles (local copy)
					ffs_epfile_release
					ffs_data_closed
					if (last file closed)
					ffs_data_reset
					ffs_data_clear
					ffs_epfiles_destroy
spin_lock
dereference epfiles

Fix this races by taking epfiles local copy & assigning it under
spinlock and if epfiles(local) is null then update it in ffs->epfiles
then finally destroy it.
Extending the scope further from the race, protecting the ep related
structures, and concurrent accesses.

Fixes: a9e6f83c2df1 ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable")
Co-developed-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/1643256595-10797-1-git-send-email-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_fs.c | 56 ++++++++++++++++++++++--------
 1 file changed, 42 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index d8652321e15e9..bb0d92837f677 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1710,16 +1710,24 @@ static void ffs_data_put(struct ffs_data *ffs)
 
 static void ffs_data_closed(struct ffs_data *ffs)
 {
+	struct ffs_epfile *epfiles;
+	unsigned long flags;
+
 	ENTER();
 
 	if (atomic_dec_and_test(&ffs->opened)) {
 		if (ffs->no_disconnect) {
 			ffs->state = FFS_DEACTIVATED;
-			if (ffs->epfiles) {
-				ffs_epfiles_destroy(ffs->epfiles,
-						   ffs->eps_count);
-				ffs->epfiles = NULL;
-			}
+			spin_lock_irqsave(&ffs->eps_lock, flags);
+			epfiles = ffs->epfiles;
+			ffs->epfiles = NULL;
+			spin_unlock_irqrestore(&ffs->eps_lock,
+							flags);
+
+			if (epfiles)
+				ffs_epfiles_destroy(epfiles,
+						 ffs->eps_count);
+
 			if (ffs->setup_state == FFS_SETUP_PENDING)
 				__ffs_ep0_stall(ffs);
 		} else {
@@ -1766,14 +1774,27 @@ static struct ffs_data *ffs_data_new(const char *dev_name)
 
 static void ffs_data_clear(struct ffs_data *ffs)
 {
+	struct ffs_epfile *epfiles;
+	unsigned long flags;
+
 	ENTER();
 
 	ffs_closed(ffs);
 
 	BUG_ON(ffs->gadget);
 
-	if (ffs->epfiles) {
-		ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count);
+	spin_lock_irqsave(&ffs->eps_lock, flags);
+	epfiles = ffs->epfiles;
+	ffs->epfiles = NULL;
+	spin_unlock_irqrestore(&ffs->eps_lock, flags);
+
+	/*
+	 * potential race possible between ffs_func_eps_disable
+	 * & ffs_epfile_release therefore maintaining a local
+	 * copy of epfile will save us from use-after-free.
+	 */
+	if (epfiles) {
+		ffs_epfiles_destroy(epfiles, ffs->eps_count);
 		ffs->epfiles = NULL;
 	}
 
@@ -1921,12 +1942,15 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
 
 static void ffs_func_eps_disable(struct ffs_function *func)
 {
-	struct ffs_ep *ep         = func->eps;
-	struct ffs_epfile *epfile = func->ffs->epfiles;
-	unsigned count            = func->ffs->eps_count;
+	struct ffs_ep *ep;
+	struct ffs_epfile *epfile;
+	unsigned short count;
 	unsigned long flags;
 
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	count = func->ffs->eps_count;
+	epfile = func->ffs->epfiles;
+	ep = func->eps;
 	while (count--) {
 		/* pending requests get nuked */
 		if (likely(ep->ep))
@@ -1944,14 +1968,18 @@ static void ffs_func_eps_disable(struct ffs_function *func)
 
 static int ffs_func_eps_enable(struct ffs_function *func)
 {
-	struct ffs_data *ffs      = func->ffs;
-	struct ffs_ep *ep         = func->eps;
-	struct ffs_epfile *epfile = ffs->epfiles;
-	unsigned count            = ffs->eps_count;
+	struct ffs_data *ffs;
+	struct ffs_ep *ep;
+	struct ffs_epfile *epfile;
+	unsigned short count;
 	unsigned long flags;
 	int ret = 0;
 
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	ffs = func->ffs;
+	ep = func->eps;
+	epfile = ffs->epfiles;
+	count = ffs->eps_count;
 	while(count--) {
 		ep->ep->driver_data = ep;
 
-- 
2.34.1

[PATCH 5.10 059/116] gpio: aggregator: Fix calling into sleeping GPIO controllers

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 2cba05451a6d0c703bb74f1a250691404f27c4f1 ]

If the parent GPIO controller is a sleeping controller (e.g. a GPIO
controller connected to I2C), getting or setting a GPIO triggers a
might_sleep() warning.  This happens because the GPIO Aggregator takes
the can_sleep flag into account only for its internal locking, not for
calling into the parent GPIO controller.

Fix this by using the gpiod_[gs]et*_cansleep() APIs when calling into a
sleeping GPIO controller.

Reported-by: Mikko Salomäki <ms@datarespons.se>
Fixes: 828546e24280f721 ("gpio: Add GPIO Aggregator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-aggregator.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
index dfd8a4876a27a..d5f25246404d9 100644
--- a/drivers/gpio/gpio-aggregator.c
+++ b/drivers/gpio/gpio-aggregator.c
@@ -330,7 +330,8 @@ static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
 {
 	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
 
-	return gpiod_get_value(fwd->descs[offset]);
+	return chip->can_sleep ? gpiod_get_value_cansleep(fwd->descs[offset])
+			       : gpiod_get_value(fwd->descs[offset]);
 }
 
 static int gpio_fwd_get_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
@@ -349,7 +350,10 @@ static int gpio_fwd_get_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
 	for_each_set_bit(i, mask, fwd->chip.ngpio)
 		descs[j++] = fwd->descs[i];
 
-	error = gpiod_get_array_value(j, descs, NULL, values);
+	if (fwd->chip.can_sleep)
+		error = gpiod_get_array_value_cansleep(j, descs, NULL, values);
+	else
+		error = gpiod_get_array_value(j, descs, NULL, values);
 	if (error)
 		return error;
 
@@ -384,7 +388,10 @@ static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
 {
 	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
 
-	gpiod_set_value(fwd->descs[offset], value);
+	if (chip->can_sleep)
+		gpiod_set_value_cansleep(fwd->descs[offset], value);
+	else
+		gpiod_set_value(fwd->descs[offset], value);
 }
 
 static void gpio_fwd_set_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
@@ -403,7 +410,10 @@ static void gpio_fwd_set_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
 		descs[j++] = fwd->descs[i];
 	}
 
-	gpiod_set_array_value(j, descs, NULL, values);
+	if (fwd->chip.can_sleep)
+		gpiod_set_array_value_cansleep(j, descs, NULL, values);
+	else
+		gpiod_set_array_value(j, descs, NULL, values);
 }
 
 static void gpio_fwd_set_multiple_locked(struct gpio_chip *chip,
-- 
2.34.1

[PATCH 5.10 060/116] drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.

[Greg Kroah-Hartman]

From: Dave Stevenson <dave.stevenson@raspberrypi.com>

[ Upstream commit 1d118965965f89948236ebe23072bb1fca5e7832 ]

The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.

Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.

Amend the filtering appropriately.

Fixes: 57fb32e632be ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 5d5c4e9a86218..a308f2d05d173 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -800,6 +800,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	unsigned long long tmds_rate;
 
 	if (vc4_hdmi->variant->unsupported_odd_h_timings &&
+	    !(mode->flags & DRM_MODE_FLAG_DBLCLK) &&
 	    ((mode->hdisplay % 2) || (mode->hsync_start % 2) ||
 	     (mode->hsync_end % 2) || (mode->htotal % 2)))
 		return -EINVAL;
@@ -834,6 +835,7 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 
 	if (vc4_hdmi->variant->unsupported_odd_h_timings &&
+	    !(mode->flags & DRM_MODE_FLAG_DBLCLK) &&
 	    ((mode->hdisplay % 2) || (mode->hsync_start % 2) ||
 	     (mode->hsync_end % 2) || (mode->htotal % 2)))
 		return MODE_H_ILLEGAL;
-- 
2.34.1

[PATCH 5.10 061/116] misc: fastrpc: avoid double fput() on failed usercopy

[Greg Kroah-Hartman]

From: Mathias Krause <minipli@grsecurity.net>

[ Upstream commit 46963e2e0629cb31c96b1d47ddd89dc3d8990b34 ]

If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.

Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.

Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid.

Fixes: 6cffd79504ce ("misc: fastrpc: Add support for dmabuf exporter")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/fastrpc.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index ef49ac8d91019..d0471fec37fbb 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1284,7 +1284,14 @@ static int fastrpc_dmabuf_alloc(struct fastrpc_user *fl, char __user *argp)
 	}
 
 	if (copy_to_user(argp, &bp, sizeof(bp))) {
-		dma_buf_put(buf->dmabuf);
+		/*
+		 * The usercopy failed, but we can't do much about it, as
+		 * dma_buf_fd() already called fd_install() and made the
+		 * file descriptor accessible for the current process. It
+		 * might already be closed and dmabuf no longer valid when
+		 * we reach this point. Therefore "leak" the fd and rely on
+		 * the process exit path to do any required cleanup.
+		 */
 		return -EFAULT;
 	}
 
-- 
2.34.1

[PATCH 5.10 062/116] netfilter: ctnetlink: disable helper autoassign

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit d1ca60efc53d665cf89ed847a14a510a81770b81 ]

When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:

ctnetlink_create_conntrack
  -> nf_ct_helper_ext_add + assign helper
    -> ctnetlink_setup_nat
      -> ctnetlink_parse_nat_setup
         -> parse_nat_setup -> nfnetlink_parse_nat_setup
	                       -> nf_nat_setup_info
                                 -> nf_conntrack_alter_reply
                                   -> __nf_ct_try_assign_helper

... and __nf_ct_try_assign_helper will zero the helper again.

Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.

Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().

NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.

Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/netfilter/nf_conntrack_common.h | 2 +-
 net/netfilter/nf_conntrack_netlink.c               | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h
index 4b3395082d15c..26071021e986f 100644
--- a/include/uapi/linux/netfilter/nf_conntrack_common.h
+++ b/include/uapi/linux/netfilter/nf_conntrack_common.h
@@ -106,7 +106,7 @@ enum ip_conntrack_status {
 	IPS_NAT_CLASH = IPS_UNTRACKED,
 #endif
 
-	/* Conntrack got a helper explicitly attached via CT target. */
+	/* Conntrack got a helper explicitly attached (ruleset, ctnetlink). */
 	IPS_HELPER_BIT = 13,
 	IPS_HELPER = (1 << IPS_HELPER_BIT),
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index c6bcc28ae3387..eeeaa34b3e7b5 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -2283,7 +2283,8 @@ ctnetlink_create_conntrack(struct net *net,
 			if (helper->from_nlattr)
 				helper->from_nlattr(helpinfo, ct);
 
-			/* not in hash table yet so not strictly necessary */
+			/* disable helper auto-assignment for this entry */
+			ct->status |= IPS_HELPER;
 			RCU_INIT_POINTER(help->helper, helper);
 		}
 	} else {
-- 
2.34.1

[PATCH 5.10 063/116] arm64: dts: meson-g12b-odroid-n2: fix typo dio2133

[Greg Kroah-Hartman]

From: Dongjin Kim <tobetter@gmail.com>

[ Upstream commit bc41099f060ea74ac8d02c51bd0f5f46d969bedf ]

Typo in audio amplifier node, dioo2133 -> dio2133

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index b9b8cd4b5ba9d..87e8e64ad5cae 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -15,7 +15,7 @@ aliases {
 		ethernet0 = &ethmac;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -215,7 +215,7 @@ sound {
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
-- 
2.34.1

[PATCH 5.10 064/116] ixgbevf: Require large buffers for build_skb on 82599VF

[Greg Kroah-Hartman]

From: Samuel Mendoza-Jonas <samjonas@amazon.com>

[ Upstream commit fe68195daf34d5dddacd3f93dd3eafc4beca3a0e ]

>From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.

However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].

This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.

Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.

[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c

Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index a7d0a459969a2..2d6ac61d7a3e6 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1992,14 +1992,15 @@ static void ixgbevf_set_rx_buffer_len(struct ixgbevf_adapter *adapter,
 	if (adapter->flags & IXGBEVF_FLAGS_LEGACY_RX)
 		return;
 
-	set_ring_build_skb_enabled(rx_ring);
+	if (PAGE_SIZE < 8192)
+		if (max_frame > IXGBEVF_MAX_FRAME_BUILD_SKB)
+			set_ring_uses_large_buffer(rx_ring);
 
-	if (PAGE_SIZE < 8192) {
-		if (max_frame <= IXGBEVF_MAX_FRAME_BUILD_SKB)
-			return;
+	/* 82599 can't rely on RXDCTL.RLPML to restrict the size of the frame */
+	if (adapter->hw.mac.type == ixgbe_mac_82599_vf && !ring_uses_large_buffer(rx_ring))
+		return;
 
-		set_ring_uses_large_buffer(rx_ring);
-	}
+	set_ring_build_skb_enabled(rx_ring);
 }
 
 /**
-- 
2.34.1

[PATCH 5.10 065/116] drm/panel: simple: Assign data from panel_dpi_probe() correctly

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ]

In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 204674fccd646..7ffd2a04ab23a 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -557,6 +557,7 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 		err = panel_dpi_probe(dev, panel);
 		if (err)
 			goto free_ddc;
+		desc = panel->desc;
 	} else {
 		if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
 			panel_simple_parse_panel_timing_node(dev, panel, &dt);
-- 
2.34.1

[PATCH 5.10 065/116] drm/panel: simple: Assign data from panel_dpi_probe() correctly

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ]

In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 204674fccd646..7ffd2a04ab23a 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -557,6 +557,7 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 		err = panel_dpi_probe(dev, panel);
 		if (err)
 			goto free_ddc;
+		desc = panel->desc;
 	} else {
 		if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
 			panel_simple_parse_panel_timing_node(dev, panel, &dt);
-- 
2.34.1

[PATCH 5.10 066/116] ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit dc0075ba7f387fe4c48a8c674b11ab6f374a6acc ]

Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while
suspended to idle") made acpi_ec_dispatch_gpe() check
pm_wakeup_pending(), but that is before canceling the SCI wakeup,
so pm_wakeup_pending() is always true.  This causes the loop in
acpi_ec_dispatch_gpe() to always terminate after one iteration which
may not be correct.

Address this issue by canceling the SCI wakeup earlier, from
acpi_ec_dispatch_gpe() itself.

Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c    | 10 ++++++++++
 drivers/acpi/sleep.c | 14 ++++----------
 2 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 3f2e5ea9ab6b7..8347eaee679c8 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -2064,6 +2064,16 @@ bool acpi_ec_dispatch_gpe(void)
 	if (acpi_any_gpe_status_set(first_ec->gpe))
 		return true;
 
+	/*
+	 * Cancel the SCI wakeup and process all pending events in case there
+	 * are any wakeup ones in there.
+	 *
+	 * Note that if any non-EC GPEs are active at this point, the SCI will
+	 * retrigger after the rearming in acpi_s2idle_wake(), so no events
+	 * should be missed by canceling the wakeup here.
+	 */
+	pm_system_cancel_wakeup();
+
 	/*
 	 * Dispatch the EC GPE in-band, but do not report wakeup in any case
 	 * to allow the caller to process events properly after that.
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 503935b1deeb1..e2614ea820bb8 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -1012,21 +1012,15 @@ static bool acpi_s2idle_wake(void)
 			return true;
 		}
 
-		/* Check non-EC GPE wakeups and dispatch the EC GPE. */
+		/*
+		 * Check non-EC GPE wakeups and if there are none, cancel the
+		 * SCI-related wakeup and dispatch the EC GPE.
+		 */
 		if (acpi_ec_dispatch_gpe()) {
 			pm_pr_dbg("ACPI non-EC GPE wakeup\n");
 			return true;
 		}
 
-		/*
-		 * Cancel the SCI wakeup and process all pending events in case
-		 * there are any wakeup ones in there.
-		 *
-		 * Note that if any non-EC GPEs are active at this point, the
-		 * SCI will retrigger after the rearming below, so no events
-		 * should be missed by canceling the wakeup here.
-		 */
-		pm_system_cancel_wakeup();
 		acpi_os_wait_events_complete();
 
 		/*
-- 
2.34.1

[PATCH 5.10 067/116] gpio: sifive: use the correct register to read output values

[Greg Kroah-Hartman]

From: Niklas Cassel <niklas.cassel@wdc.com>

[ Upstream commit cc38ef936840ac29204d806deb4d1836ec509594 ]

Setting the output of a GPIO to 1 using gpiod_set_value(), followed by
reading the same GPIO using gpiod_get_value(), will currently yield an
incorrect result.

This is because the SiFive GPIO device stores the output values in reg_set,
not reg_dat.

Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the
generic driver reads the correct register.

Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: added the Fixes tag]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-sifive.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c
index d5eb9ca119016..4f28fa73450c1 100644
--- a/drivers/gpio/gpio-sifive.c
+++ b/drivers/gpio/gpio-sifive.c
@@ -206,7 +206,7 @@ static int sifive_gpio_probe(struct platform_device *pdev)
 			 NULL,
 			 chip->base + SIFIVE_GPIO_OUTPUT_EN,
 			 chip->base + SIFIVE_GPIO_INPUT_EN,
-			 0);
+			 BGPIOF_READ_OUTPUT_REG_SET);
 	if (ret) {
 		dev_err(dev, "unable to init generic GPIO\n");
 		return ret;
-- 
2.34.1

[PATCH 5.10 068/116] bonding: pair enable_port with slave_arr_updates

[Greg Kroah-Hartman]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit 23de0d7b6f0e3f9a6283a882594c479949da1120 ]

When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.

I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.

Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_3ad.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index aa001b16765ae..ab8c833411654 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1003,8 +1003,8 @@ static void ad_mux_machine(struct port *port, bool *update_slave_arr)
 				if (port->aggregator &&
 				    port->aggregator->is_active &&
 				    !__port_is_enabled(port)) {
-
 					__enable_port(port);
+					*update_slave_arr = true;
 				}
 			}
 			break;
@@ -1760,6 +1760,7 @@ static void ad_agg_selection_logic(struct aggregator *agg,
 			     port = port->next_port_in_aggregator) {
 				__enable_port(port);
 			}
+			*update_slave_arr = true;
 		}
 	}
 
-- 
2.34.1

[PATCH 5.10 069/116] net: dsa: mv88e6xxx: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit f53a2ce893b2c7884ef94471f170839170a4eba0 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.

systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
 mdiobus_free+0x44/0x50
 devm_mdiobus_free+0x10/0x20
 devres_release_all+0xa0/0x100
 __device_release_driver+0x190/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x4c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 kernel_power_off+0x34/0x6c
 __do_sys_reboot+0x15c/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Rafael Richter <Rafael.Richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index afc5500ef8ed9..9b451b820d7a6 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3072,7 +3072,7 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 			return err;
 	}
 
-	bus = devm_mdiobus_alloc_size(chip->dev, sizeof(*mdio_bus));
+	bus = mdiobus_alloc_size(sizeof(*mdio_bus));
 	if (!bus)
 		return -ENOMEM;
 
@@ -3097,14 +3097,14 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 	if (!external) {
 		err = mv88e6xxx_g2_irq_mdio_setup(chip, bus);
 		if (err)
-			return err;
+			goto out;
 	}
 
 	err = of_mdiobus_register(bus, np);
 	if (err) {
 		dev_err(chip->dev, "Cannot register MDIO bus (%d)\n", err);
 		mv88e6xxx_g2_irq_mdio_free(chip, bus);
-		return err;
+		goto out;
 	}
 
 	if (external)
@@ -3113,6 +3113,10 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 		list_add(&mdio_bus->list, &chip->mdios);
 
 	return 0;
+
+out:
+	mdiobus_free(bus);
+	return err;
 }
 
 static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
@@ -3128,6 +3132,7 @@ static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
 			mv88e6xxx_g2_irq_mdio_free(chip, bus);
 
 		mdiobus_unregister(bus);
+		mdiobus_free(bus);
 	}
 }
 
-- 
2.34.1

[PATCH 5.10 070/116] net: dsa: ar9331: register the mdiobus under devres

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 50facd86e9fbc4b93fe02e5fe05776047f45dbfb ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/qca/ar9331.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 661745932a539..c33bdcf7efc58 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -289,7 +289,7 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
 	if (!mnp)
 		return -ENODEV;
 
-	ret = of_mdiobus_register(mbus, mnp);
+	ret = devm_of_mdiobus_register(dev, mbus, mnp);
 	of_node_put(mnp);
 	if (ret)
 		return ret;
@@ -856,7 +856,6 @@ static void ar9331_sw_remove(struct mdio_device *mdiodev)
 	struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev);
 
 	irq_domain_remove(priv->irqdomain);
-	mdiobus_unregister(priv->mbus);
 	dsa_unregister_switch(&priv->ds);
 
 	reset_control_assert(priv->sw_reset);
-- 
2.34.1

[PATCH 5.10 071/116] net: dsa: bcm_sf2: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 08f1a20822349004bb9cc1b153ecb516e9f2889d ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/bcm_sf2.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 690e9d9495e75..08a675a5328d7 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -504,7 +504,7 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
 	get_device(&priv->master_mii_bus->dev);
 	priv->master_mii_dn = dn;
 
-	priv->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
+	priv->slave_mii_bus = mdiobus_alloc();
 	if (!priv->slave_mii_bus) {
 		of_node_put(dn);
 		return -ENOMEM;
@@ -564,8 +564,10 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
 	}
 
 	err = mdiobus_register(priv->slave_mii_bus);
-	if (err && dn)
+	if (err && dn) {
+		mdiobus_free(priv->slave_mii_bus);
 		of_node_put(dn);
+	}
 
 	return err;
 }
@@ -573,6 +575,7 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
 static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv)
 {
 	mdiobus_unregister(priv->slave_mii_bus);
+	mdiobus_free(priv->slave_mii_bus);
 	of_node_put(priv->master_mii_dn);
 }
 
-- 
2.34.1

[PATCH 5.10 072/116] net: dsa: felix: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 209bdb7ec6a28c7cdf580a0a98afbc9fc3b98932 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 2e5bbdca5ea47..cd8d9b0e0edb3 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1050,7 +1050,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 		return PTR_ERR(hw);
 	}
 
-	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
+	bus = mdiobus_alloc_size(sizeof(*mdio_priv));
 	if (!bus)
 		return -ENOMEM;
 
@@ -1070,6 +1070,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 	rc = mdiobus_register(bus);
 	if (rc < 0) {
 		dev_err(dev, "failed to register MDIO bus\n");
+		mdiobus_free(bus);
 		return rc;
 	}
 
@@ -1119,6 +1120,7 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot)
 		lynx_pcs_destroy(pcs);
 	}
 	mdiobus_unregister(felix->imdio);
+	mdiobus_free(felix->imdio);
 }
 
 static void vsc9959_sched_speed_set(struct ocelot *ocelot, int port,
-- 
2.34.1

[PATCH 5.10 073/116] net: dsa: lantiq_gswip: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/lantiq_gswip.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 4d23a7aba7961..ed517985ca88e 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -495,8 +495,9 @@ static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg)
 static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 {
 	struct dsa_switch *ds = priv->ds;
+	int err;
 
-	ds->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
+	ds->slave_mii_bus = mdiobus_alloc();
 	if (!ds->slave_mii_bus)
 		return -ENOMEM;
 
@@ -509,7 +510,11 @@ static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 	ds->slave_mii_bus->parent = priv->dev;
 	ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
 
-	return of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	err = of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	if (err)
+		mdiobus_free(ds->slave_mii_bus);
+
+	return err;
 }
 
 static int gswip_pce_table_entry_read(struct gswip_priv *priv,
@@ -2086,8 +2091,10 @@ static int gswip_probe(struct platform_device *pdev)
 	gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
 	dsa_unregister_switch(priv->ds);
 mdio_bus:
-	if (mdio_np)
+	if (mdio_np) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
+	}
 put_mdio_node:
 	of_node_put(mdio_np);
 	for (i = 0; i < priv->num_gphy_fw; i++)
@@ -2107,6 +2114,7 @@ static int gswip_remove(struct platform_device *pdev)
 
 	if (priv->ds->slave_mii_bus) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
 		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
 	}
 
-- 
2.34.1

[PATCH 5.10 074/116] ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 5611a00697c8ecc5aad04392bea629e9d6a20463 ]

ip[6]mr_free_table() can only be called under RTNL lock.

RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4
R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000
FS:  00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
 ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
 ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
 ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
 ops_init+0xaf/0x470 net/core/net_namespace.c:140
 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
 copy_process+0x2e0c/0x7300 kernel/fork.c:2167
 kernel_clone+0xe7/0xab0 kernel/fork.c:2555
 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038
RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059
RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000
RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300
R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000
 </TASK>

Fixes: f243e5a7859a ("ipmr,ip6mr: call ip6mr_free_table() on failure path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220208053451.2885398-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ipmr.c  | 2 ++
 net/ipv6/ip6mr.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 939792a388146..be1976536f1c0 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -261,7 +261,9 @@ static int __net_init ipmr_rules_init(struct net *net)
 	return 0;
 
 err2:
+	rtnl_lock();
 	ipmr_free_table(mrt);
+	rtnl_unlock();
 err1:
 	fib_rules_unregister(ops);
 	return err;
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 06b0d2c329b94..41cb348a7c3c4 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -248,7 +248,9 @@ static int __net_init ip6mr_rules_init(struct net *net)
 	return 0;
 
 err2:
+	rtnl_lock();
 	ip6mr_free_table(mrt);
+	rtnl_unlock();
 err1:
 	fib_rules_unregister(ops);
 	return err;
-- 
2.34.1

[PATCH 5.10 075/116] nfp: flower: fix ida_idx not being released

[Greg Kroah-Hartman]

From: Louis Peens <louis.peens@corigine.com>

[ Upstream commit 7db788ad627aabff2b74d4f1a3b68516d0fee0d7 ]

When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT
that gets set if nfp_flower_is_supported_bridge is true is not taken
into account. Consequently the path that should release the ida_index
in cleanup is never triggered, causing messages like:

    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.

after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to
new tunnel flows not being offloaded.

Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if
the port is of type OTHER.

Fixes: 2e0bc7f3cb55 ("nfp: flower: encode mac indexes with pre-tunnel rule check")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/netronome/nfp/flower/tunnel_conf.c  | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
index d19c02e991145..d3d5b663a4a3c 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
@@ -1011,6 +1011,7 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 	struct nfp_flower_repr_priv *repr_priv;
 	struct nfp_tun_offloaded_mac *entry;
 	struct nfp_repr *repr;
+	u16 nfp_mac_idx;
 	int ida_idx;
 
 	entry = nfp_tunnel_lookup_offloaded_macs(app, mac);
@@ -1029,8 +1030,6 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 		entry->bridge_count--;
 
 		if (!entry->bridge_count && entry->ref_count) {
-			u16 nfp_mac_idx;
-
 			nfp_mac_idx = entry->index & ~NFP_TUN_PRE_TUN_IDX_BIT;
 			if (__nfp_tunnel_offload_mac(app, mac, nfp_mac_idx,
 						     false)) {
@@ -1046,7 +1045,6 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 
 	/* If MAC is now used by 1 repr set the offloaded MAC index to port. */
 	if (entry->ref_count == 1 && list_is_singular(&entry->repr_list)) {
-		u16 nfp_mac_idx;
 		int port, err;
 
 		repr_priv = list_first_entry(&entry->repr_list,
@@ -1074,8 +1072,14 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 	WARN_ON_ONCE(rhashtable_remove_fast(&priv->tun.offloaded_macs,
 					    &entry->ht_node,
 					    offloaded_macs_params));
+
+	if (nfp_flower_is_supported_bridge(netdev))
+		nfp_mac_idx = entry->index & ~NFP_TUN_PRE_TUN_IDX_BIT;
+	else
+		nfp_mac_idx = entry->index;
+
 	/* If MAC has global ID then extract and free the ida entry. */
-	if (nfp_tunnel_is_mac_idx_global(entry->index)) {
+	if (nfp_tunnel_is_mac_idx_global(nfp_mac_idx)) {
 		ida_idx = nfp_tunnel_get_ida_from_global_mac_idx(entry->index);
 		ida_simple_remove(&priv->tun.mac_off_ids, ida_idx);
 	}
-- 
2.34.1

[PATCH 5.10 076/116] net: do not keep the dst cache when uncloning an skb dst and its metadata

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit cfc56f85e72f5b9c5c5be26dc2b16518d36a7868 ]

When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.

The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.

In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).

Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/dst_metadata.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/net/dst_metadata.h b/include/net/dst_metadata.h
index 14efa0ded75dd..b997e0c1e3627 100644
--- a/include/net/dst_metadata.h
+++ b/include/net/dst_metadata.h
@@ -123,6 +123,19 @@ static inline struct metadata_dst *tun_dst_unclone(struct sk_buff *skb)
 
 	memcpy(&new_md->u.tun_info, &md_dst->u.tun_info,
 	       sizeof(struct ip_tunnel_info) + md_size);
+#ifdef CONFIG_DST_CACHE
+	/* Unclone the dst cache if there is one */
+	if (new_md->u.tun_info.dst_cache.cache) {
+		int ret;
+
+		ret = dst_cache_init(&new_md->u.tun_info.dst_cache, GFP_ATOMIC);
+		if (ret) {
+			metadata_dst_free(new_md);
+			return ERR_PTR(ret);
+		}
+	}
+#endif
+
 	skb_dst_drop(skb);
 	dst_hold(&new_md->dst);
 	skb_dst_set(skb, &new_md->dst);
-- 
2.34.1

[PATCH 5.10 077/116] net: fix a memleak when uncloning an skb dst and its metadata

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ]

When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.

The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.

Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.

Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/dst_metadata.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/net/dst_metadata.h b/include/net/dst_metadata.h
index b997e0c1e3627..adab27ba1ecbf 100644
--- a/include/net/dst_metadata.h
+++ b/include/net/dst_metadata.h
@@ -137,7 +137,6 @@ static inline struct metadata_dst *tun_dst_unclone(struct sk_buff *skb)
 #endif
 
 	skb_dst_drop(skb);
-	dst_hold(&new_md->dst);
 	skb_dst_set(skb, &new_md->dst);
 	return new_md;
 }
-- 
2.34.1

[PATCH 5.10 078/116] veth: fix races around rq->rx_notify_masked

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 68468d8c4cd4222a4ca1f185ab5a1c14480d078c ]

veth being NETIF_F_LLTX enabled, we need to be more careful
whenever we read/write rq->rx_notify_masked.

BUG: KCSAN: data-race in veth_xmit / veth_xmit

write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0:
 __veth_xdp_flush drivers/net/veth.c:269 [inline]
 veth_xmit+0x307/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1:
 __veth_xdp_flush drivers/net/veth.c:268 [inline]
 veth_xmit+0x2d6/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 948d4f214fde ("veth: Add driver XDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/veth.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index aef66f8eecee1..f7e3eb309a26e 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -256,9 +256,10 @@ static void __veth_xdp_flush(struct veth_rq *rq)
 {
 	/* Write ptr_ring before reading rx_notify_masked */
 	smp_mb();
-	if (!rq->rx_notify_masked) {
-		rq->rx_notify_masked = true;
-		napi_schedule(&rq->xdp_napi);
+	if (!READ_ONCE(rq->rx_notify_masked) &&
+	    napi_schedule_prep(&rq->xdp_napi)) {
+		WRITE_ONCE(rq->rx_notify_masked, true);
+		__napi_schedule(&rq->xdp_napi);
 	}
 }
 
@@ -852,8 +853,10 @@ static int veth_poll(struct napi_struct *napi, int budget)
 		/* Write rx_notify_masked before reading ptr_ring */
 		smp_store_mb(rq->rx_notify_masked, false);
 		if (unlikely(!__ptr_ring_empty(&rq->xdp_ring))) {
-			rq->rx_notify_masked = true;
-			napi_schedule(&rq->xdp_napi);
+			if (napi_schedule_prep(&rq->xdp_napi)) {
+				WRITE_ONCE(rq->rx_notify_masked, true);
+				__napi_schedule(&rq->xdp_napi);
+			}
 		}
 	}
 
-- 
2.34.1

[PATCH 5.10 079/116] net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE

[Greg Kroah-Hartman]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit bc1c3c3b10db4f37c41e6107751a8d450d9c431c ]

Fix loading of the driver when built as a module.

Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/mdio/mdio-aspeed.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c
index 966c3b4ad59d1..e2273588c75b6 100644
--- a/drivers/net/mdio/mdio-aspeed.c
+++ b/drivers/net/mdio/mdio-aspeed.c
@@ -148,6 +148,7 @@ static const struct of_device_id aspeed_mdio_of_match[] = {
 	{ .compatible = "aspeed,ast2600-mdio", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, aspeed_mdio_of_match);
 
 static struct platform_driver aspeed_mdio_driver = {
 	.driver = {
-- 
2.34.1

[PATCH 5.10 080/116] tipc: rate limit warning for received illegal binding update

[Greg Kroah-Hartman]

From: Jon Maloy <jmaloy@redhat.com>

[ Upstream commit c7223d687758462826a20e9735305d55bb874c70 ]

It would be easy to craft a message containing an illegal binding table
update operation. This is handled correctly by the code, but the
corresponding warning printout is not rate limited as is should be.
We fix this now.

Fixes: b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/name_distr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c
index fe4edce459ad4..a757fe28bcb5f 100644
--- a/net/tipc/name_distr.c
+++ b/net/tipc/name_distr.c
@@ -315,7 +315,7 @@ static bool tipc_update_nametbl(struct net *net, struct distr_item *i,
 		pr_warn_ratelimited("Failed to remove binding %u,%u from %x\n",
 				    type, lower, node);
 	} else {
-		pr_warn("Unrecognized name table message received\n");
+		pr_warn_ratelimited("Unknown name table message received\n");
 	}
 	return false;
 }
-- 
2.34.1

[PATCH 5.10 081/116] net: amd-xgbe: disable interrupts during pci removal

[Greg Kroah-Hartman]

From: Raju Rangoju <Raju.Rangoju@amd.com>

[ Upstream commit 68c2d6af1f1e469544d6cbe9a601d96fb9c00e7f ]

Hardware interrupts are enabled during the pci probe, however,
they are not disabled during pci removal.

Disable all hardware interrupts during pci removal to avoid any
issues.

Fixes: e75377404726 ("amd-xgbe: Update PCI support to use new IRQ functions")
Suggested-by: Selwin Sebastian <Selwin.Sebastian@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
index 90cb55eb54665..014513ce00a14 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -418,6 +418,9 @@ static void xgbe_pci_remove(struct pci_dev *pdev)
 
 	pci_free_irq_vectors(pdata->pcidev);
 
+	/* Disable all interrupts in the hardware */
+	XP_IOWRITE(pdata, XP_INT_EN, 0x0);
+
 	xgbe_free_pdata(pdata);
 }
 
-- 
2.34.1

[PATCH 5.10 082/116] dpaa2-eth: unregister the netdev before disconnecting from the PHY

[Greg Kroah-Hartman]

From: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>

[ Upstream commit 9ccc6e0c8959a019bb40f6b18704b142c04b19a8 ]

The netdev should be unregistered before we are disconnecting from the
MAC/PHY so that the dev_close callback is called and the PHY and the
phylink workqueues are actually stopped before we are disconnecting and
destroying the phylink instance.

Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index f06d88c471d0f..f917bc9c87969 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -4405,12 +4405,12 @@ static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev)
 #ifdef CONFIG_DEBUG_FS
 	dpaa2_dbg_remove(priv);
 #endif
+
+	unregister_netdev(net_dev);
 	rtnl_lock();
 	dpaa2_eth_disconnect_mac(priv);
 	rtnl_unlock();
 
-	unregister_netdev(net_dev);
-
 	dpaa2_eth_dl_port_del(priv);
 	dpaa2_eth_dl_traps_unregister(priv);
 	dpaa2_eth_dl_unregister(priv);
-- 
2.34.1

[PATCH 5.10 083/116] ice: fix an error code in ice_cfg_phy_fec()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 21338d58736ef70eaae5fd75d567a358ff7902f9 ]

Propagate the error code from ice_get_link_default_override() instead
of returning success.

Fixes: ea78ce4dab05 ("ice: add link lenient and default override support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 64714757bd4f4..2b0d0373ab2c6 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -3032,7 +3032,8 @@ ice_cfg_phy_fec(struct ice_port_info *pi, struct ice_aqc_set_phy_cfg_data *cfg,
 	if (fec == ICE_FEC_AUTO && ice_fw_supports_link_override(pi->hw)) {
 		struct ice_link_default_override_tlv tlv;
 
-		if (ice_get_link_default_override(&tlv, pi))
+		status = ice_get_link_default_override(&tlv, pi);
+		if (status)
 			goto out;
 
 		if (!(tlv.options & ICE_LINK_OVERRIDE_STRICT_MODE) &&
-- 
2.34.1

[PATCH 5.10 084/116] ice: fix IPIP and SIT TSO offload

[Greg Kroah-Hartman]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit 46b699c50c0304cdbd725d7740073a7f9d5edb10 ]

The driver was avoiding offload for IPIP (at least) frames due to
parsing the inner header offsets incorrectly when trying to check
lengths.

This length check works for VXLAN frames but fails on IPIP frames
because skb_transport_offset points to the inner header in IPIP
frames, which meant the subtraction of transport_header from
inner_network_header returns a negative value (-20).

With the code before this patch, everything continued to work, but GSO
was being used to segment, causing throughputs of 1.5Gb/s per thread.
After this patch, throughput is more like 10Gb/s per thread for IPIP
traffic.

Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/ice/ice_lan_tx_rx.h    |  1 +
 drivers/net/ethernet/intel/ice/ice_main.c     | 25 +++++++++++++------
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
index c0ee0541e53fc..847e1ef8e1064 100644
--- a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
+++ b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
@@ -507,6 +507,7 @@ struct ice_tx_ctx_desc {
 			(0x3FFFFULL << ICE_TXD_CTX_QW1_TSO_LEN_S)
 
 #define ICE_TXD_CTX_QW1_MSS_S	50
+#define ICE_TXD_CTX_MIN_MSS	64
 
 enum ice_tx_ctx_desc_cmd_bits {
 	ICE_TX_CTX_DESC_TSO		= 0x01,
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 4c7d1720113a0..fb4656902634c 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -6787,6 +6787,7 @@ ice_features_check(struct sk_buff *skb,
 		   struct net_device __always_unused *netdev,
 		   netdev_features_t features)
 {
+	bool gso = skb_is_gso(skb);
 	size_t len;
 
 	/* No point in doing any of this if neither checksum nor GSO are
@@ -6799,24 +6800,32 @@ ice_features_check(struct sk_buff *skb,
 	/* We cannot support GSO if the MSS is going to be less than
 	 * 64 bytes. If it is then we need to drop support for GSO.
 	 */
-	if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_size < 64))
+	if (gso && (skb_shinfo(skb)->gso_size < ICE_TXD_CTX_MIN_MSS))
 		features &= ~NETIF_F_GSO_MASK;
 
-	len = skb_network_header(skb) - skb->data;
+	len = skb_network_offset(skb);
 	if (len > ICE_TXD_MACLEN_MAX || len & 0x1)
 		goto out_rm_features;
 
-	len = skb_transport_header(skb) - skb_network_header(skb);
+	len = skb_network_header_len(skb);
 	if (len > ICE_TXD_IPLEN_MAX || len & 0x1)
 		goto out_rm_features;
 
 	if (skb->encapsulation) {
-		len = skb_inner_network_header(skb) - skb_transport_header(skb);
-		if (len > ICE_TXD_L4LEN_MAX || len & 0x1)
-			goto out_rm_features;
+		/* this must work for VXLAN frames AND IPIP/SIT frames, and in
+		 * the case of IPIP frames, the transport header pointer is
+		 * after the inner header! So check to make sure that this
+		 * is a GRE or UDP_TUNNEL frame before doing that math.
+		 */
+		if (gso && (skb_shinfo(skb)->gso_type &
+			    (SKB_GSO_GRE | SKB_GSO_UDP_TUNNEL))) {
+			len = skb_inner_network_header(skb) -
+			      skb_transport_header(skb);
+			if (len > ICE_TXD_L4LEN_MAX || len & 0x1)
+				goto out_rm_features;
+		}
 
-		len = skb_inner_transport_header(skb) -
-		      skb_inner_network_header(skb);
+		len = skb_inner_network_header_len(skb);
 		if (len > ICE_TXD_IPLEN_MAX || len & 0x1)
 			goto out_rm_features;
 	}
-- 
2.34.1

[PATCH 5.10 085/116] net: mscc: ocelot: fix mutex lock error during ethtool stats read

[Greg Kroah-Hartman]

From: Colin Foster <colin.foster@in-advantage.com>

[ Upstream commit 7fbf6795d127a3b1bb39b0e42579904cf6db1624 ]

An ongoing workqueue populates the stats buffer. At the same time, a user
might query the statistics. While writing to the buffer is mutex-locked,
reading from the buffer wasn't. This could lead to buggy reads by ethtool.

This patch fixes the former blamed commit, but the bug was introduced in
the latter.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 1e1caa9735f90 ("ocelot: Clean up stats update deferred work")
Fixes: a556c76adc052 ("net: mscc: Add initial Ocelot switch support")
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 52401915828a1..a06466ecca12a 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -848,12 +848,11 @@ void ocelot_get_strings(struct ocelot *ocelot, int port, u32 sset, u8 *data)
 }
 EXPORT_SYMBOL(ocelot_get_strings);
 
+/* Caller must hold &ocelot->stats_lock */
 static void ocelot_update_stats(struct ocelot *ocelot)
 {
 	int i, j;
 
-	mutex_lock(&ocelot->stats_lock);
-
 	for (i = 0; i < ocelot->num_phys_ports; i++) {
 		/* Configure the port to read the stats from */
 		ocelot_write(ocelot, SYS_STAT_CFG_STAT_VIEW(i), SYS_STAT_CFG);
@@ -872,8 +871,6 @@ static void ocelot_update_stats(struct ocelot *ocelot)
 					      ~(u64)U32_MAX) + val;
 		}
 	}
-
-	mutex_unlock(&ocelot->stats_lock);
 }
 
 static void ocelot_check_stats_work(struct work_struct *work)
@@ -882,7 +879,9 @@ static void ocelot_check_stats_work(struct work_struct *work)
 	struct ocelot *ocelot = container_of(del_work, struct ocelot,
 					     stats_work);
 
+	mutex_lock(&ocelot->stats_lock);
 	ocelot_update_stats(ocelot);
+	mutex_unlock(&ocelot->stats_lock);
 
 	queue_delayed_work(ocelot->stats_queue, &ocelot->stats_work,
 			   OCELOT_STATS_CHECK_DELAY);
@@ -892,12 +891,16 @@ void ocelot_get_ethtool_stats(struct ocelot *ocelot, int port, u64 *data)
 {
 	int i;
 
+	mutex_lock(&ocelot->stats_lock);
+
 	/* check and update now */
 	ocelot_update_stats(ocelot);
 
 	/* Copy all counters */
 	for (i = 0; i < ocelot->num_stats; i++)
 		*data++ = ocelot->stats[port * ocelot->num_stats + i];
+
+	mutex_unlock(&ocelot->stats_lock);
 }
 EXPORT_SYMBOL(ocelot_get_ethtool_stats);
 
-- 
2.34.1

[PATCH 5.10 086/116] net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 51a04ebf21122d5c76a716ecd9bfc33ea44b2b39 ]

Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something
allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus)
will free the memory backing the mdio_bus as well. Therefore, the
mdio_bus->list element is freed memory, but we continue to iterate
through the list of MDIO buses using that list element.

To fix this, use the proper list iterator that handles element deletion
by keeping a copy of the list element next pointer.

Fixes: f53a2ce893b2 ("net: dsa: mv88e6xxx: don't use devres for mdiobus")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 9b451b820d7a6..1992be77522ac 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3122,10 +3122,10 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
 
 {
-	struct mv88e6xxx_mdio_bus *mdio_bus;
+	struct mv88e6xxx_mdio_bus *mdio_bus, *p;
 	struct mii_bus *bus;
 
-	list_for_each_entry(mdio_bus, &chip->mdios, list) {
+	list_for_each_entry_safe(mdio_bus, p, &chip->mdios, list) {
 		bus = mdio_bus->bus;
 
 		if (!mdio_bus->external)
-- 
2.34.1

[PATCH 5.10 087/116] vt_ioctl: fix array_index_nospec in vt_setactivate

[Greg Kroah-Hartman]

From: Jakob Koschel <jakobkoschel@gmail.com>

commit 61cc70d9e8ef5b042d4ed87994d20100ec8896d9 upstream.

array_index_nospec ensures that an out-of-bounds value is set to zero
on the transient path. Decreasing the value by one afterwards causes
a transient integer underflow. vsa.console should be decreased first
and then sanitized with array_index_nospec.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -699,8 +699,8 @@ static int vt_setactivate(struct vt_seta
 	if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
 		return -ENXIO;
 
-	vsa.console = array_index_nospec(vsa.console, MAX_NR_CONSOLES + 1);
 	vsa.console--;
+	vsa.console = array_index_nospec(vsa.console, MAX_NR_CONSOLES);
 	console_lock();
 	ret = vc_allocate(vsa.console);
 	if (ret) {

[PATCH 5.10 088/116] vt_ioctl: add array_index_nospec to VT_ACTIVATE

[Greg Kroah-Hartman]

From: Jakob Koschel <jakobkoschel@gmail.com>

commit 28cb138f559f8c1a1395f5564f86b8bbee83631b upstream.

in vt_setactivate an almost identical code path has been patched
with array_index_nospec. In the VT_ACTIVATE path the user input
is from a system call argument instead of a usercopy.
For consistency both code paths should have the same mitigations
applied.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -945,6 +945,7 @@ int vt_ioctl(struct tty_struct *tty,
 			return -ENXIO;
 
 		arg--;
+		arg = array_index_nospec(arg, MAX_NR_CONSOLES);
 		console_lock();
 		ret = vc_allocate(arg);
 		console_unlock();

[PATCH 5.10 089/116] n_tty: wake up poll(POLLRDNORM) on receiving data

[Greg Kroah-Hartman]

From: TATSUKAWA KOSUKE (立川 江介) <tatsu-ab1@nec.com>

commit c816b2e65b0e86b95011418cad334f0524fc33b8 upstream.

The poll man page says POLLRDNORM is equivalent to POLLIN when used as
an event.
$ man poll
<snip>
              POLLRDNORM
                     Equivalent to POLLIN.

However, in n_tty driver, POLLRDNORM does not return until timeout even
if there is terminal input, whereas POLLIN returns.

The following test program works until kernel-3.17, but the test stops
in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups").

[Steps to run test program]
  $ cc -o test-pollrdnorm test-pollrdnorm.c
  $ ./test-pollrdnorm
  foo          <-- Type in something from the terminal followed by [RET].
                   The string should be echoed back.

  ------------------------< test-pollrdnorm.c >------------------------
  #include <stdio.h>
  #include <errno.h>
  #include <poll.h>
  #include <unistd.h>

  void main(void)
  {
	int		n;
	unsigned char	buf[8];
	struct pollfd	fds[1] = {{ 0, POLLRDNORM, 0 }};

	n = poll(fds, 1, -1);
	if (n < 0)
		perror("poll");
	n = read(0, buf, 8);
	if (n < 0)
		perror("read");
	if (n > 0)
		write(1, buf, n);
  }
  ------------------------------------------------------------------------

The attached patch fixes this problem.  Many calls to
wake_up_interruptible_poll() in the kernel source code already specify
"POLLIN | POLLRDNORM".

Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups")
Cc: stable@vger.kernel.org
Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com>
Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1372,7 +1372,7 @@ handle_newline:
 			put_tty_queue(c, ldata);
 			smp_store_release(&ldata->canon_head, ldata->read_head);
 			kill_fasync(&tty->fasync, SIGIO, POLL_IN);
-			wake_up_interruptible_poll(&tty->read_wait, EPOLLIN);
+			wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
 			return 0;
 		}
 	}
@@ -1653,7 +1653,7 @@ static void __receive_buf(struct tty_str
 
 	if (read_cnt(ldata)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
-		wake_up_interruptible_poll(&tty->read_wait, EPOLLIN);
+		wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
 	}
 }
 

[PATCH 5.10 090/116] eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX

[Greg Kroah-Hartman]

From: Jonas Malaco <jonas@protocubo.io>

commit c0689e46be23160d925dca95dfc411f1a0462708 upstream.

Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.

In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8.  If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows.  And this is common
when user space tries to read the entire EEPROM at once.

To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.

Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/eeprom/ee1004.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/misc/eeprom/ee1004.c
+++ b/drivers/misc/eeprom/ee1004.c
@@ -82,6 +82,9 @@ static ssize_t ee1004_eeprom_read(struct
 	if (unlikely(offset + count > EE1004_PAGE_SIZE))
 		count = EE1004_PAGE_SIZE - offset;
 
+	if (count > I2C_SMBUS_BLOCK_MAX)
+		count = I2C_SMBUS_BLOCK_MAX;
+
 	status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset,
 							   count, buf);
 	dev_dbg(&client->dev, "read %zu@%d --> %d\n", count, offset, status);

[PATCH 5.10 091/116] usb: dwc2: drd: fix soft connect when gadget is unconfigured

[Greg Kroah-Hartman]

From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87 upstream.

When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
 new high-speed USB device number ...
 device descriptor read/64, error -110

Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
 - usb_gadget_connect
   - dwc2_hsotg_pullup
     - dwc2_hsotg_core_connect

Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable@kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/drd.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -109,8 +109,10 @@ static int dwc2_drd_role_sw_set(struct u
 		already = dwc2_ovr_avalid(hsotg, true);
 	} else if (role == USB_ROLE_DEVICE) {
 		already = dwc2_ovr_bvalid(hsotg, true);
-		/* This clear DCTL.SFTDISCON bit */
-		dwc2_hsotg_core_connect(hsotg);
+		if (hsotg->enabled) {
+			/* This clear DCTL.SFTDISCON bit */
+			dwc2_hsotg_core_connect(hsotg);
+		}
 	} else {
 		if (dwc2_is_device_mode(hsotg)) {
 			if (!dwc2_ovr_bvalid(hsotg, false))

[PATCH 5.10 092/116] Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 736e8d89044c1c330967fb938fa766cd9e0d8af0 upstream.

This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.

It causes build errors as reported by the kernel test robot.

Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured")
Cc: stable@kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/drd.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -109,10 +109,8 @@ static int dwc2_drd_role_sw_set(struct u
 		already = dwc2_ovr_avalid(hsotg, true);
 	} else if (role == USB_ROLE_DEVICE) {
 		already = dwc2_ovr_bvalid(hsotg, true);
-		if (hsotg->enabled) {
-			/* This clear DCTL.SFTDISCON bit */
-			dwc2_hsotg_core_connect(hsotg);
-		}
+		/* This clear DCTL.SFTDISCON bit */
+		dwc2_hsotg_core_connect(hsotg);
 	} else {
 		if (dwc2_is_device_mode(hsotg)) {
 			if (!dwc2_ovr_bvalid(hsotg, false))

[PATCH 5.10 093/116] net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream.

ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:

 - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
   causing OOB reads and (on big-endian systems) OOB endianness flips.
 - A packet can overlap the metadata array, causing a later OOB
   endianness flip to corrupt data used by a cloned SKB that has already
   been handed off into the network stack.
 - A packet SKB can be constructed whose tail is far beyond its end,
   causing out-of-bounds heap data to be considered part of the SKB's
   data.

I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/ax88179_178a.c |   68 +++++++++++++++++++++++------------------
 1 file changed, 39 insertions(+), 29 deletions(-)

--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1467,58 +1467,68 @@ static int ax88179_rx_fixup(struct usbne
 	u16 hdr_off;
 	u32 *pkt_hdr;
 
-	/* This check is no longer done by usbnet */
-	if (skb->len < dev->net->hard_header_len)
+	/* At the end of the SKB, there's a header telling us how many packets
+	 * are bundled into this buffer and where we can find an array of
+	 * per-packet metadata (which contains elements encoded into u16).
+	 */
+	if (skb->len < 4)
 		return 0;
-
 	skb_trim(skb, skb->len - 4);
 	rx_hdr = get_unaligned_le32(skb_tail_pointer(skb));
-
 	pkt_cnt = (u16)rx_hdr;
 	hdr_off = (u16)(rx_hdr >> 16);
+
+	if (pkt_cnt == 0)
+		return 0;
+
+	/* Make sure that the bounds of the metadata array are inside the SKB
+	 * (and in front of the counter at the end).
+	 */
+	if (pkt_cnt * 2 + hdr_off > skb->len)
+		return 0;
 	pkt_hdr = (u32 *)(skb->data + hdr_off);
 
-	while (pkt_cnt--) {
+	/* Packets must not overlap the metadata array */
+	skb_trim(skb, hdr_off);
+
+	for (; ; pkt_cnt--, pkt_hdr++) {
 		u16 pkt_len;
 
 		le32_to_cpus(pkt_hdr);
 		pkt_len = (*pkt_hdr >> 16) & 0x1fff;
 
-		/* Check CRC or runt packet */
-		if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
-		    (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
-			skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-			pkt_hdr++;
-			continue;
-		}
-
-		if (pkt_cnt == 0) {
-			skb->len = pkt_len;
-			/* Skip IP alignment pseudo header */
-			skb_pull(skb, 2);
-			skb_set_tail_pointer(skb, skb->len);
-			skb->truesize = pkt_len + sizeof(struct sk_buff);
-			ax88179_rx_checksum(skb, pkt_hdr);
-			return 1;
-		}
+		if (pkt_len > skb->len)
+			return 0;
 
-		ax_skb = skb_clone(skb, GFP_ATOMIC);
-		if (ax_skb) {
+		/* Check CRC or runt packet */
+		if (((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) == 0) &&
+		    pkt_len >= 2 + ETH_HLEN) {
+			bool last = (pkt_cnt == 0);
+
+			if (last) {
+				ax_skb = skb;
+			} else {
+				ax_skb = skb_clone(skb, GFP_ATOMIC);
+				if (!ax_skb)
+					return 0;
+			}
 			ax_skb->len = pkt_len;
 			/* Skip IP alignment pseudo header */
 			skb_pull(ax_skb, 2);
 			skb_set_tail_pointer(ax_skb, ax_skb->len);
 			ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
 			ax88179_rx_checksum(ax_skb, pkt_hdr);
+
+			if (last)
+				return 1;
+
 			usbnet_skb_return(dev, ax_skb);
-		} else {
-			return 0;
 		}
 
-		skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-		pkt_hdr++;
+		/* Trim this packet away from the SKB */
+		if (!skb_pull(skb, (pkt_len + 7) & 0xFFF8))
+			return 0;
 	}
-	return 1;
 }
 
 static struct sk_buff *

[PATCH 5.10 094/116] usb: ulpi: Move of_node_put to ulpi_dev_release

[Greg Kroah-Hartman]

From: Sean Anderson <sean.anderson@seco.com>

commit 092f45b13e51666fe8ecbf2d6cd247aa7e6c1f74 upstream.

Drivers are not unbound from the device when ulpi_unregister_interface
is called. Move of_node-freeing code to ulpi_dev_release which is called
only after all users are gone.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/common/ulpi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -132,6 +132,7 @@ static const struct attribute_group *ulp
 
 static void ulpi_dev_release(struct device *dev)
 {
+	of_node_put(dev->of_node);
 	kfree(to_ulpi_dev(dev));
 }
 
@@ -301,7 +302,6 @@ EXPORT_SYMBOL_GPL(ulpi_register_interfac
  */
 void ulpi_unregister_interface(struct ulpi *ulpi)
 {
-	of_node_put(ulpi->dev.of_node);
 	device_unregister(&ulpi->dev);
 }
 EXPORT_SYMBOL_GPL(ulpi_unregister_interface);

[PATCH 5.10 095/116] usb: ulpi: Call of_node_put correctly

[Greg Kroah-Hartman]

From: Sean Anderson <sean.anderson@seco.com>

commit 0a907ee9d95e3ac35eb023d71f29eae0aaa52d1b upstream.

of_node_put should always be called on device nodes gotten from
of_get_*. Additionally, it should only be called after there are no
remaining users. To address the first issue, call of_node_put if later
steps in ulpi_register fail. To address the latter, call put_device if
device_register fails, which will call ulpi_dev_release if necessary.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/common/ulpi.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -250,12 +250,16 @@ static int ulpi_register(struct device *
 		return ret;
 
 	ret = ulpi_read_id(ulpi);
-	if (ret)
+	if (ret) {
+		of_node_put(ulpi->dev.of_node);
 		return ret;
+	}
 
 	ret = device_register(&ulpi->dev);
-	if (ret)
+	if (ret) {
+		put_device(&ulpi->dev);
 		return ret;
+	}
 
 	dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n",
 		ulpi->id.vendor, ulpi->id.product);

[PATCH 5.10 096/116] usb: dwc3: gadget: Prevent core from processing stale TRBs

[Greg Kroah-Hartman]

From: Udipto Goswami <quic_ugoswami@quicinc.com>

commit 117b4e96c7f362eb6459543883fc07f77662472c upstream.

With CPU re-ordering on write instructions, there might
be a chance that the HWO is set before the TRB is updated
with the new mapped buffer address.
And in the case where core is processing a list of TRBs
it is possible that it fetched the TRBs when the HWO is set
but before the buffer address is updated.
Prevent this by adding a memory barrier before the HWO
is updated to ensure that the core always process the
updated TRBs.

Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1072,6 +1072,19 @@ static void __dwc3_prepare_one_trb(struc
 	if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
 		trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id);
 
+	/*
+	 * As per data book 4.2.3.2TRB Control Bit Rules section
+	 *
+	 * The controller autonomously checks the HWO field of a TRB to determine if the
+	 * entire TRB is valid. Therefore, software must ensure that the rest of the TRB
+	 * is valid before setting the HWO field to '1'. In most systems, this means that
+	 * software must update the fourth DWORD of a TRB last.
+	 *
+	 * However there is a possibility of CPU re-ordering here which can cause
+	 * controller to observe the HWO bit set prematurely.
+	 * Add a write memory barrier to prevent CPU re-ordering.
+	 */
+	wmb();
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
 	dwc3_ep_inc_enq(dep);

[PATCH 5.10 097/116] usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

commit 459702eea6132888b5c5b64c0e9c626da4ec2493 upstream.

The support the external role switch a variety of situations were
addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE
leaves the host up which can cause some error messages when
switching from host to none, to gadget, to none, and then back
to host again.

 xhci-hcd ee000000.usb: Abort failed to stop command ring: -110
 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead
 xhci-hcd ee000000.usb: HC died; cleaning up
 usb 4-1: device not accepting address 6, error -108
 usb usb4-port1: couldn't allocate usb_device

After this happens it will not act as a host again.
Fix this by releasing the host mode when transitioning to USB_ROLE_NONE.

Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/renesas_usb3.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2378,6 +2378,8 @@ static void handle_ext_role_switch_state
 	switch (role) {
 	case USB_ROLE_NONE:
 		usb3->connection_state = USB_ROLE_NONE;
+		if (cur_role == USB_ROLE_HOST)
+			device_release_driver(host);
 		if (usb3->driver)
 			usb3_disconnect(usb3);
 		usb3_vbus_out(usb3, false);

[PATCH 5.10 098/116] USB: gadget: validate interface OS descriptor requests

[Greg Kroah-Hartman]

From: Szymon Heidrich <szymon.heidrich@gmail.com>

commit 75e5b4849b81e19e9efe1654b30d7f3151c33c2c upstream.

Stall the control endpoint in case provided index exceeds array size of
MAX_CONFIG_INTERFACES or when the retrieved function pointer is null.

Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/composite.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1944,6 +1944,9 @@ unknown:
 				if (w_index != 0x5 || (w_value >> 8))
 					break;
 				interface = w_value & 0xFF;
+				if (interface >= MAX_CONFIG_INTERFACES ||
+				    !os_desc_cfg->interface[interface])
+					break;
 				buf[6] = w_index;
 				count = count_ext_prop(os_desc_cfg,
 					interface);

[PATCH 5.10 099/116] usb: gadget: rndis: check size of RNDIS_MSG_SET command

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 38ea1eac7d88072bbffb630e2b3db83ca649b826 upstream.

Check the size of the RNDIS_MSG_SET command given to us before
attempting to respond to an invalid message size.

Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/rndis.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -637,14 +637,17 @@ static int rndis_set_response(struct rnd
 	rndis_set_cmplt_type *resp;
 	rndis_resp_t *r;
 
+	BufLength = le32_to_cpu(buf->InformationBufferLength);
+	BufOffset = le32_to_cpu(buf->InformationBufferOffset);
+	if ((BufLength > RNDIS_MAX_TOTAL_SIZE) ||
+	    (BufOffset + 8 >= RNDIS_MAX_TOTAL_SIZE))
+		    return -EINVAL;
+
 	r = rndis_add_response(params, sizeof(rndis_set_cmplt_type));
 	if (!r)
 		return -ENOMEM;
 	resp = (rndis_set_cmplt_type *)r->buf;
 
-	BufLength = le32_to_cpu(buf->InformationBufferLength);
-	BufOffset = le32_to_cpu(buf->InformationBufferOffset);
-
 #ifdef	VERBOSE_DEBUG
 	pr_debug("%s: Length: %d\n", __func__, BufLength);
 	pr_debug("%s: Offset: %d\n", __func__, BufOffset);

[PATCH 5.10 100/116] usb: gadget: f_uac2: Define specific wTerminalType

[Greg Kroah-Hartman]

From: Pavel Hofman <pavel.hofman@ivitera.com>

commit 5432184107cd0013761bdfa6cb6079527ef87b95 upstream.

Several users have reported that their Win10 does not enumerate UAC2
gadget with the existing wTerminalType set to
UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g.
https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213.
While the constant is officially defined by the USB terminal types
document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines
no undefined output terminal type in its usbaudio20.h header.

Therefore wTerminalType of EP-IN is set to
UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to
UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget.

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uac2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -176,7 +176,7 @@ static struct uac2_input_terminal_descri
 
 	.bDescriptorSubtype = UAC_INPUT_TERMINAL,
 	/* .bTerminalID = DYNAMIC */
-	.wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_UNDEFINED),
+	.wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_MICROPHONE),
 	.bAssocTerminal = 0,
 	/* .bCSourceID = DYNAMIC */
 	.iChannelNames = 0,
@@ -204,7 +204,7 @@ static struct uac2_output_terminal_descr
 
 	.bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
 	/* .bTerminalID = DYNAMIC */
-	.wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_UNDEFINED),
+	.wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_SPEAKER),
 	.bAssocTerminal = 0,
 	/* .bSourceID = DYNAMIC */
 	/* .bCSourceID = DYNAMIC */

[PATCH 5.10 101/116] usb: raw-gadget: fix handling of dual-direction-capable endpoints

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 292d2c82b105d92082c2120a44a58de9767e44f1 upstream.

Under dummy_hcd, every available endpoint is *either* IN or OUT capable.
But with some real hardware, there are endpoints that support both IN and
OUT. In particular, the PLX 2380 has four available endpoints that each
support both IN and OUT.

raw-gadget currently gets confused and thinks that any endpoint that is
usable as an IN endpoint can never be used as an OUT endpoint.

Fix it by looking at the direction in the configured endpoint descriptor
instead of looking at the hardware capabilities.

With this change, I can use the PLX 2380 with raw-gadget.

Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@vger.kernel.org>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20220126205214.2149936-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/legacy/raw_gadget.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -1003,7 +1003,7 @@ static int raw_process_ep_io(struct raw_
 		ret = -EBUSY;
 		goto out_unlock;
 	}
-	if ((in && !ep->ep->caps.dir_in) || (!in && ep->ep->caps.dir_in)) {
+	if (in != usb_endpoint_dir_in(ep->ep->desc)) {
 		dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
 		ret = -EINVAL;
 		goto out_unlock;

[PATCH 5.10 102/116] USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320

[Greg Kroah-Hartman]

From: Cameron Williams <cang1@live.co.uk>

commit fbb9b194e15a63c56c5664e76ccd0e85c6100cea upstream.

This patch adds support for the Brainboxes US-159, US-235 and US-320
USB-to-Serial devices.

Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    3 +++
 drivers/usb/serial/ftdi_sio_ids.h |    3 +++
 2 files changed, 6 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -969,6 +969,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_159_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) },
@@ -977,12 +978,14 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_235_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_320_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1506,6 +1506,9 @@
 #define BRAINBOXES_VX_023_PID		0x1003 /* VX-023 ExpressCard 1 Port RS422/485 */
 #define BRAINBOXES_VX_034_PID		0x1004 /* VX-034 ExpressCard 2 Port RS422/485 */
 #define BRAINBOXES_US_101_PID		0x1011 /* US-101 1xRS232 */
+#define BRAINBOXES_US_159_PID		0x1021 /* US-159 1xRS232 */
+#define BRAINBOXES_US_235_PID		0x1017 /* US-235 1xRS232 */
+#define BRAINBOXES_US_320_PID		0x1019 /* US-320 1xRS422/485 */
 #define BRAINBOXES_US_324_PID		0x1013 /* US-324 1xRS422/485 1Mbaud */
 #define BRAINBOXES_US_606_1_PID		0x2001 /* US-606 6 Port RS232 Serial Port 1 and 2 */
 #define BRAINBOXES_US_606_2_PID		0x2002 /* US-606 6 Port RS232 Serial Port 3 and 4 */

[PATCH 5.10 103/116] USB: serial: option: add ZTE MF286D modem

[Greg Kroah-Hartman]

From: Pawel Dembicki <paweldembicki@gmail.com>

commit d48384c7ed6c8fe4727eaa0f3048f62afd1cd715 upstream.

Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem.

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=19d2 ProdID=1485 Rev=52.87
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=MF286DZTED000000
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1649,6 +1649,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0x00, 0x00) }, /* ZTE MF871A */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff),  /* ZTE MF286D */
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },

[PATCH 5.10 104/116] USB: serial: ch341: add support for GW Instek USB2.0-Serial devices

[Greg Kroah-Hartman]

From: Stephan Brunner <s.brunner@stephan-brunner.net>

commit fa77ce201f7f2d823b07753575122d1ae5597fbe upstream.

Programmable lab power supplies made by GW Instek, such as the
GPP-2323, have a USB port exposing a serial port to control the device.

Stringing the supplied Windows driver, references to the ch341 chip are
found. Binding the existing ch341 driver to the VID/PID of the GPP-2323
("GW Instek USB2.0-Serial" as per the USB product name) works out of the
box, communication and control is now possible.

This patch should work with any GPP series power supply due to
similarities in the product line.

Signed-off-by: Stephan Brunner <s.brunner@stephan-brunner.net>
Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ch341.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -85,6 +85,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1a86, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7522) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
+	{ USB_DEVICE(0x2184, 0x0057) },
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x9986, 0x7523) },
 	{ },

[PATCH 5.10 105/116] USB: serial: cp210x: add NCR Retail IO box id

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit b50f8f09c622297d3cf46e332e17ba8adedec9af upstream.

Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane
SelfServ Checkout - R6C:

	https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c

Reported-by: Scott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -55,6 +55,7 @@ static void cp210x_enable_event_mode(str
 static void cp210x_disable_event_mode(struct usb_serial_port *port);
 
 static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0404, 0x034C) },	/* NCR Retail IO Box */
 	{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */

[PATCH 5.10 106/116] USB: serial: cp210x: add CPI Bulk Coin Recycler id

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 6ca0c6283340d819bf9c7d8e76be33c9fbd903ab upstream.

Add the device id for the Crane Payment Innovation / Money Controls Bulk
Coin Recycler:

	https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf

Reported-by: Scott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -73,6 +73,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
+	{ USB_DEVICE(0x106F, 0x0003) },	/* CPI / Money Controls Bulk Coin Recycler */
 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */

[PATCH 5.10 107/116] speakup-dectlk: Restore pitch setting

[Greg Kroah-Hartman]

From: Samuel Thibault <samuel.thibault@ens-lyon.org>

commit bca828ccdd6548d24613d0cede04ada4dfb2f89c upstream.

d97a9d7aea04 ("staging/speakup: Add inflection synth parameter")
introduced the inflection parameter, but happened to drop the pitch
parameter from the dectlk driver. This restores it.

Cc: stable@vger.kernel.org
Fixes: d97a9d7aea04 ("staging/speakup: Add inflection synth parameter")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220206015626.aesbhvvdkmqsrbaw@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/accessibility/speakup/speakup_dectlk.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/accessibility/speakup/speakup_dectlk.c
+++ b/drivers/accessibility/speakup/speakup_dectlk.c
@@ -44,6 +44,7 @@ static struct var_t vars[] = {
 	{ CAPS_START, .u.s = {"[:dv ap 160] " } },
 	{ CAPS_STOP, .u.s = {"[:dv ap 100 ] " } },
 	{ RATE, .u.n = {"[:ra %d] ", 180, 75, 650, 0, 0, NULL } },
+	{ PITCH, .u.n = {"[:dv ap %d] ", 122, 50, 350, 0, 0, NULL } },
 	{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
 	{ VOL, .u.n = {"[:dv g5 %d] ", 86, 60, 86, 0, 0, NULL } },
 	{ PUNCT, .u.n = {"[:pu %c] ", 0, 0, 2, 0, 0, "nsa" } },

[PATCH 5.10 108/116] phy: ti: Fix missing sentinel for clk_div_table

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit 6d1e6bcb31663ee83aaea1f171f3dbfe95dd4a69 upstream.

_get_table_maxdiv() tries to access "clk_div_table" array out of bound
defined in phy-j721e-wiz.c. Add a sentinel entry to prevent
the following global-out-of-bounds error reported by enabling KASAN.

[    9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148
[    9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38
[    9.565926]
[    9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360
[    9.576242] Hardware name: Texas Instruments J721e EVM (DT)
[    9.581832] Workqueue: events_unbound deferred_probe_work_func
[    9.587708] Call trace:
[    9.590174]  dump_backtrace+0x20c/0x218
[    9.594038]  show_stack+0x18/0x68
[    9.597375]  dump_stack_lvl+0x9c/0xd8
[    9.601062]  print_address_description.constprop.0+0x78/0x334
[    9.606830]  kasan_report+0x1f0/0x260
[    9.610517]  __asan_load4+0x9c/0xd8
[    9.614030]  _get_maxdiv+0xc0/0x148
[    9.617540]  divider_determine_rate+0x88/0x488
[    9.622005]  divider_round_rate_parent+0xc8/0x124
[    9.626729]  wiz_clk_div_round_rate+0x54/0x68
[    9.631113]  clk_core_determine_round_nolock+0x124/0x158
[    9.636448]  clk_core_round_rate_nolock+0x68/0x138
[    9.641260]  clk_core_set_rate_nolock+0x268/0x3a8
[    9.645987]  clk_set_rate+0x50/0xa8
[    9.649499]  cdns_sierra_phy_init+0x88/0x248
[    9.653794]  phy_init+0x98/0x108
[    9.657046]  cdns_pcie_enable_phy+0xa0/0x170
[    9.661340]  cdns_pcie_init_phy+0x250/0x2b0
[    9.665546]  j721e_pcie_probe+0x4b8/0x798
[    9.669579]  platform_probe+0x8c/0x108
[    9.673350]  really_probe+0x114/0x630
[    9.677037]  __driver_probe_device+0x18c/0x220
[    9.681505]  driver_probe_device+0xac/0x150
[    9.685712]  __device_attach_driver+0xec/0x170
[    9.690178]  bus_for_each_drv+0xf0/0x158
[    9.694124]  __device_attach+0x184/0x210
[    9.698070]  device_initial_probe+0x14/0x20
[    9.702277]  bus_probe_device+0xec/0x100
[    9.706223]  deferred_probe_work_func+0x124/0x180
[    9.710951]  process_one_work+0x4b0/0xbc0
[    9.714983]  worker_thread+0x74/0x5d0
[    9.718668]  kthread+0x214/0x230
[    9.721919]  ret_from_fork+0x10/0x20
[    9.725520]
[    9.727032] The buggy address belongs to the variable:
[    9.732183]  clk_div_table+0x24/0x440

Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220117110108.4117-1-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/phy/ti/phy-j721e-wiz.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -177,6 +177,7 @@ static const struct clk_div_table clk_di
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 4, },
 	{ .val = 3, .div = 8, },
+	{ /* sentinel */ },
 };
 
 static struct wiz_clk_div_sel clk_div_sel[] = {

[PATCH 5.10 109/116] hwmon: (dell-smm) Speed up setting of fan speed

[Greg Kroah-Hartman]

From: Armin Wolf <W_Armin@gmx.de>

commit c0d79987a0d82671bff374c07f2201f9bdf4aaa2 upstream.

When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(),
causing an unnecessary SMM call since from the two users of this
function, only i8k_ioctl_unlocked() needs to know the new fan status
while dell_smm_write() ignores the new fan status.
Since SMM calls can be very slow while also making error reporting
difficult for dell_smm_write(), remove the function call from
i8k_set_fan() and call it separately in i8k_ioctl_unlocked().

Tested on a Dell Inspiron 3505.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/dell-smm-hwmon.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -317,7 +317,7 @@ static int i8k_enable_fan_auto_mode(bool
 }
 
 /*
- * Set the fan speed (off, low, high). Returns the new fan status.
+ * Set the fan speed (off, low, high, ...).
  */
 static int i8k_set_fan(int fan, int speed)
 {
@@ -329,7 +329,7 @@ static int i8k_set_fan(int fan, int spee
 	speed = (speed < 0) ? 0 : ((speed > i8k_fan_max) ? i8k_fan_max : speed);
 	regs.ebx = (fan & 0xff) | (speed << 8);
 
-	return i8k_smm(&regs) ? : i8k_get_fan_status(fan);
+	return i8k_smm(&regs);
 }
 
 static int i8k_get_temp_type(int sensor)
@@ -443,7 +443,7 @@ static int
 i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg)
 {
 	int val = 0;
-	int speed;
+	int speed, err;
 	unsigned char buff[16];
 	int __user *argp = (int __user *)arg;
 
@@ -504,7 +504,11 @@ i8k_ioctl_unlocked(struct file *fp, unsi
 		if (copy_from_user(&speed, argp + 1, sizeof(int)))
 			return -EFAULT;
 
-		val = i8k_set_fan(val, speed);
+		err = i8k_set_fan(val, speed);
+		if (err < 0)
+			return err;
+
+		val = i8k_get_fan_status(val);
 		break;
 
 	default:

[PATCH 5.10 110/116] Makefile.extrawarn: Move -Wunaligned-access to W=1

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream.

-Wunaligned-access is a new warning in clang that is default enabled for
arm and arm64 under certain circumstances within the clang frontend (see
LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows
1284 total/70 unique instances of this warning (most of the instances
are in header files), which is quite noisy.

To keep a normal build green through CONFIG_WERROR, only show this
warning with W=1, which will allow automated build systems to catch new
instances of the warning so that the total number can be driven down to
zero eventually since catching unaligned accesses at compile time would
be generally useful.

Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a
Link: https://github.com/ClangBuiltLinux/linux/issues/1569
Link: https://github.com/ClangBuiltLinux/linux/issues/1576
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/Makefile.extrawarn |    1 +
 1 file changed, 1 insertion(+)

--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -51,6 +51,7 @@ KBUILD_CFLAGS += -Wno-sign-compare
 KBUILD_CFLAGS += -Wno-format-zero-length
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
 KBUILD_CFLAGS += -Wno-tautological-constant-out-of-range-compare
+KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access)
 endif
 
 endif

[PATCH 5.10 111/116] can: isotp: fix error path in isotp_sendmsg() to unlock wait queue

[Greg Kroah-Hartman]

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 8375dfac4f683e1b2c5956d919d36aeedad46699 upstream.

Commit 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.

Fixes: 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()")
Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -885,24 +885,24 @@ static int isotp_sendmsg(struct socket *
 
 	if (!size || size > MAX_MSG_LENGTH) {
 		err = -EINVAL;
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	err = memcpy_from_msg(so->tx.buf, msg, size);
 	if (err < 0)
-		goto err_out;
+		goto err_out_drop;
 
 	dev = dev_get_by_index(sock_net(sk), so->ifindex);
 	if (!dev) {
 		err = -ENXIO;
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	skb = sock_alloc_send_skb(sk, so->ll.mtu + sizeof(struct can_skb_priv),
 				  msg->msg_flags & MSG_DONTWAIT, &err);
 	if (!skb) {
 		dev_put(dev);
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	can_skb_reserve(skb);
@@ -967,7 +967,7 @@ static int isotp_sendmsg(struct socket *
 	if (err) {
 		pr_notice_once("can-isotp: %s: can_send_ret %d\n",
 			       __func__, err);
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	if (wait_tx_done) {
@@ -980,6 +980,9 @@ static int isotp_sendmsg(struct socket *
 
 	return size;
 
+err_out_drop:
+	/* drop this PDU and unlock a potential wait queue */
+	old_state = ISOTP_IDLE;
 err_out:
 	so->tx.state = old_state;
 	if (so->tx.state == ISOTP_IDLE)

[PATCH 5.10 112/116] scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit c80b27cfd93ba9f5161383f798414609e84729f3 upstream.

The driver is initiating NVMe PRLIs to determine device NVMe support.  This
should not be occurring if CONFIG_NVME_FC support is disabled.

Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.

Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc.h      |   13 ++++++++++---
 drivers/scsi/lpfc/lpfc_attr.c |    4 ++--
 2 files changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -898,6 +898,16 @@ struct lpfc_hba {
 	uint32_t cfg_hostmem_hgp;
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_enable_fc4_type;
+#define LPFC_ENABLE_FCP  1
+#define LPFC_ENABLE_NVME 2
+#define LPFC_ENABLE_BOTH 3
+#if (IS_ENABLED(CONFIG_NVME_FC))
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#else
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#endif
 	uint32_t cfg_aer_support;
 	uint32_t cfg_sriov_nr_virtfn;
 	uint32_t cfg_request_firmware_upgrade;
@@ -918,9 +928,6 @@ struct lpfc_hba {
 	uint32_t cfg_ras_fwlog_func;
 	uint32_t cfg_enable_bbcr;	/* Enable BB Credit Recovery */
 	uint32_t cfg_enable_dpp;	/* Enable Direct Packet Push */
-#define LPFC_ENABLE_FCP  1
-#define LPFC_ENABLE_NVME 2
-#define LPFC_ENABLE_BOTH 3
 	uint32_t cfg_enable_pbde;
 	struct nvmet_fc_target_port *targetport;
 	lpfc_vpd_t vpd;		/* vital product data */
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3797,8 +3797,8 @@ LPFC_ATTR_R(nvmet_mrq_post,
  *                    3 - register both FCP and NVME
  * Supported values are [1,3]. Default value is 3
  */
-LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH,
-	    LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
+LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE,
+	    LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE,
 	    "Enable FC4 Protocol support - FCP / NVME");
 
 /*

[PATCH 5.10 113/116] scsi: lpfc: Reduce log messages seen after firmware download

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit 5852ed2a6a39c862c8a3fdf646e1f4e01b91d710 upstream.

Messages around firmware download were incorrectly tagged as being related
to discovery trace events. Thus, firmware download status ended up dumping
the trace log as well as the firmware update message. As there were a
couple of log messages in this state, the trace log was dumped multiple
times.

Resolve this by converting from trace events to SLI events.

Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_init.c |    2 +-
 drivers/scsi/lpfc/lpfc_sli.c  |    8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1998,7 +1998,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *ph
 		}
 		if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
 		    reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"3143 Port Down: Firmware Update "
 					"Detected\n");
 			en_rn_msg = false;
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12402,6 +12402,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *ph
 	uint32_t uerr_sta_hi, uerr_sta_lo;
 	uint32_t if_type, portsmphr;
 	struct lpfc_register portstat_reg;
+	u32 logmask;
 
 	/*
 	 * For now, use the SLI4 device internal unrecoverable error
@@ -12452,7 +12453,12 @@ lpfc_sli4_eratt_read(struct lpfc_hba *ph
 				readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
 			phba->work_status[1] =
 				readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			logmask = LOG_TRACE_EVENT;
+			if (phba->work_status[0] ==
+				SLIPORT_ERR1_REG_ERR_CODE_2 &&
+			    phba->work_status[1] == SLIPORT_ERR2_REG_FW_RESTART)
+				logmask = LOG_SLI;
+			lpfc_printf_log(phba, KERN_ERR, logmask,
 					"2885 Port Status Event: "
 					"port status reg 0x%x, "
 					"port smphr reg 0x%x, "

[PATCH 5.10 114/116] arm64: dts: imx8mq: fix lcdif port node

[Greg Kroah-Hartman]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

commit 91f6d5f181f6629dd74ab71759fe92d3f4eff966 upstream.

The port node does not have a unit-address, remove it.
This fixes the warnings:
lcd-controller@30320000: 'port' is a required property
lcd-controller@30320000: 'port@0' does not match any of the regexes:
'pinctrl-[0-9]+'

Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -524,7 +524,7 @@
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};

[PATCH 5.10 115/116] perf: Fix list corruption in perf_cgroup_switch()

[Greg Kroah-Hartman]

From: Song Liu <song@kernel.org>

commit 5f4e5ce638e6a490b976ade4a40017b40abb2da0 upstream.

There's list corruption on cgrp_cpuctx_list. This happens on the
following path:

  perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
      cpu_ctx_sched_in
         ctx_sched_in
            ctx_pinned_sched_in
              merge_sched_in
                  perf_cgroup_event_disable: remove the event from the list

Use list_for_each_entry_safe() to allow removing an entry during
iteration.

Fixes: 058fe1c0440e ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -838,7 +838,7 @@ static DEFINE_PER_CPU(struct list_head,
  */
 static void perf_cgroup_switch(struct task_struct *task, int mode)
 {
-	struct perf_cpu_context *cpuctx;
+	struct perf_cpu_context *cpuctx, *tmp;
 	struct list_head *list;
 	unsigned long flags;
 
@@ -849,7 +849,7 @@ static void perf_cgroup_switch(struct ta
 	local_irq_save(flags);
 
 	list = this_cpu_ptr(&cgrp_cpuctx_list);
-	list_for_each_entry(cpuctx, list, cgrp_cpuctx_entry) {
+	list_for_each_entry_safe(cpuctx, tmp, list, cgrp_cpuctx_entry) {
 		WARN_ON_ONCE(cpuctx->ctx.nr_cgroups == 0);
 
 		perf_ctx_lock(cpuctx, cpuctx->task_ctx);

[PATCH 5.10 116/116] iommu: Fix potential use-after-free during probe

[Greg Kroah-Hartman]

From: Vijayanand Jitta <quic_vjitta@quicinc.com>

commit b54240ad494300ff0994c4539a531727874381f4 upstream.

Kasan has reported the following use after free on dev->iommu.
when a device probe fails and it is in process of freeing dev->iommu
in dev_iommu_free function, a deferred_probe_work_func runs in parallel
and tries to access dev->iommu->fwspec in of_iommu_configure path thus
causing use after free.

BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4
Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153

Workqueue: events_unbound deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x33c
 show_stack+0x18/0x24
 dump_stack_lvl+0x16c/0x1e0
 print_address_description+0x84/0x39c
 __kasan_report+0x184/0x308
 kasan_report+0x50/0x78
 __asan_load8+0xc0/0xc4
 of_iommu_configure+0xb4/0x4a4
 of_dma_configure_id+0x2fc/0x4d4
 platform_dma_configure+0x40/0x5c
 really_probe+0x1b4/0xb74
 driver_probe_device+0x11c/0x228
 __device_attach_driver+0x14c/0x304
 bus_for_each_drv+0x124/0x1b0
 __device_attach+0x25c/0x334
 device_initial_probe+0x24/0x34
 bus_probe_device+0x78/0x134
 deferred_probe_work_func+0x130/0x1a8
 process_one_work+0x4c8/0x970
 worker_thread+0x5c8/0xaec
 kthread+0x1f8/0x220
 ret_from_fork+0x10/0x18

Allocated by task 1:
 ____kasan_kmalloc+0xd4/0x114
 __kasan_kmalloc+0x10/0x1c
 kmem_cache_alloc_trace+0xe4/0x3d4
 __iommu_probe_device+0x90/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Freed by task 1:
 kasan_set_track+0x4c/0x84
 kasan_set_free_info+0x28/0x4c
 ____kasan_slab_free+0x120/0x15c
 __kasan_slab_free+0x18/0x28
 slab_free_freelist_hook+0x204/0x2fc
 kfree+0xfc/0x3a4
 __iommu_probe_device+0x284/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Fix this by setting dev->iommu to NULL first and
then freeing dev_iommu structure in dev_iommu_free
function.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/iommu.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -185,9 +185,14 @@ static struct dev_iommu *dev_iommu_get(s
 
 static void dev_iommu_free(struct device *dev)
 {
-	iommu_fwspec_free(dev);
-	kfree(dev->iommu);
+	struct dev_iommu *param = dev->iommu;
+
 	dev->iommu = NULL;
+	if (param->fwspec) {
+		fwnode_handle_put(param->fwspec->iommu_fwnode);
+		kfree(param->fwspec);
+	}
+	kfree(param);
 }
 
 static int __iommu_probe_device(struct device *dev, struct list_head *group_list)

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any new kernel problems here (but we still                                            
hit the gmp.h compilation issue):                                                                              
                                                                                                               
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y                              
                                                                                                               
Tested-by: Pavel Machek (CIP) <pavel@denx.de>                                                                  
                                                                                                               
Best regards,                                                                                                  
                                                                Pavel                                          

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Jon Hunter]

On Mon, 14 Feb 2022 10:24:59 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.101-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.101-rc1-g8d15f8eda4b3
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Florian Fainelli]

On 2/14/22 1:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.101-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Slade Watkins]

On Mon, Feb 14, 2022, at 4:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.

5.10.101-rc1 on my x86_64 test system compiled and booted with no errors or regressions.

Tested-by: Slade Watkins <slade@sladewatkins.com>

Thanks,
Slade

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Shuah Khan]

On 2/14/22 2:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.101-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Guenter Roeck]

On Mon, Feb 14, 2022 at 10:24:59AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

RE: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Fox Chen]

On Mon, 14 Feb 2022 10:24:59 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.101-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.10.101-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Samuel Zou]

On 2022/2/14 17:24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.101-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.10.101-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.101-rc1
Commit: 8d15f8eda4b30d50abb1c58be6a175f2ec07888c
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Naresh Kamboju]

On Mon, 14 Feb 2022 at 15:10, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.101-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.101-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: 8d15f8eda4b30d50abb1c58be6a175f2ec07888c
* git describe: v5.10.100-117-g8d15f8eda4b3
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.100-117-g8d15f8eda4b3

## Test Regressions (compared to v5.10.100-117-gb184da91385d)
No test regressions found.

## Metric Regressions (compared to v5.10.100-117-gb184da91385d)
No metric regressions found.

## Test Fixes (compared to v5.10.100-117-gb184da91385d)
No test fixes found.

## Metric Fixes (compared to v5.10.100-117-gb184da91385d)
No metric fixes found.

## Test result summary
total: 94250, pass: 80953, fail: 542, skip: 11915, xfail: 840

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 259 total, 259 passed, 0 failed
* arm64: 37 total, 35 passed, 2 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 36 total, 36 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 52 total, 37 passed, 15 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 37 total, 37 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 073/116] net: dsa: lantiq_gswip: dont use devres for mdiobus

[Alexey Khoroshilov]

On 14.02.2022 12:26, Greg Kroah-Hartman wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> [ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ]
> 
> As explained in commits:
> 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
> 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
> 
> mdiobus_free() will panic when called from devm_mdiobus_free() <-
> devres_release_all() <- __device_release_driver(), and that mdiobus was
> not previously unregistered.
> 
> The GSWIP switch is a platform device, so the initial set of constraints
> that I thought would cause this (I2C or SPI buses which call ->remove on
> ->shutdown) do not apply. But there is one more which applies here.
> 
> If the DSA master itself is on a bus that calls ->remove from ->shutdown
> (like dpaa2-eth, which is on the fsl-mc bus), there is a device link
> between the switch and the DSA master, and device_links_unbind_consumers()
> will unbind the GSWIP switch driver on shutdown.
> 
> So the same treatment must be applied to all DSA switch drivers, which
> is: either use devres for both the mdiobus allocation and registration,
> or don't use devres at all.
> 
> The gswip driver has the code structure in place for orderly mdiobus
> removal, so just replace devm_mdiobus_alloc() with the non-devres
> variant, and add manual free where necessary, to ensure that we don't
> let devres free a still-registered bus.
> 
> Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/dsa/lantiq_gswip.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
> index 4d23a7aba7961..ed517985ca88e 100644
> --- a/drivers/net/dsa/lantiq_gswip.c
> +++ b/drivers/net/dsa/lantiq_gswip.c
> @@ -495,8 +495,9 @@ static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg)
>  static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
>  {
>  	struct dsa_switch *ds = priv->ds;
> +	int err;
>  
> -	ds->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
> +	ds->slave_mii_bus = mdiobus_alloc();
>  	if (!ds->slave_mii_bus)
>  		return -ENOMEM;
>  
> @@ -509,7 +510,11 @@ static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
>  	ds->slave_mii_bus->parent = priv->dev;
>  	ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
>  
> -	return of_mdiobus_register(ds->slave_mii_bus, mdio_np);
> +	err = of_mdiobus_register(ds->slave_mii_bus, mdio_np);
> +	if (err)
> +		mdiobus_free(ds->slave_mii_bus);
> +
> +	return err;
>  }
>  
>  static int gswip_pce_table_entry_read(struct gswip_priv *priv,
> @@ -2086,8 +2091,10 @@ static int gswip_probe(struct platform_device *pdev)
>  	gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
>  	dsa_unregister_switch(priv->ds);
>  mdio_bus:
> -	if (mdio_np)
> +	if (mdio_np) {
>  		mdiobus_unregister(priv->ds->slave_mii_bus);
> +		mdiobus_free(priv->ds->slave_mii_bus);
> +	}
>  put_mdio_node:
>  	of_node_put(mdio_np);
>  	for (i = 0; i < priv->num_gphy_fw; i++)
> @@ -2107,6 +2114,7 @@ static int gswip_remove(struct platform_device *pdev)
>  
>  	if (priv->ds->slave_mii_bus) {
>  		mdiobus_unregister(priv->ds->slave_mii_bus);
> +		mdiobus_free(priv->ds->slave_mii_bus);
>  		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
>  	}


Should
  of_node_put(priv->ds->slave_mii_bus->dev.of_node);
be here before
  mdiobus_free(priv->ds->slave_mii_bus);
?

--
Best regards,
Alexey Khoroshilov
Linux Verification Center, ISPRAS

Re: [PATCH 5.10 073/116] net: dsa: lantiq_gswip: dont use devres for mdiobus

[Vladimir Oltean]

On Tue, Feb 15, 2022 at 12:35:44PM +0300, Alexey Khoroshilov wrote:
> >  	if (priv->ds->slave_mii_bus) {
> >  		mdiobus_unregister(priv->ds->slave_mii_bus);
> > +		mdiobus_free(priv->ds->slave_mii_bus);
> >  		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
> >  	}
> 
> 
> Should
>   of_node_put(priv->ds->slave_mii_bus->dev.of_node);
> be here before
>   mdiobus_free(priv->ds->slave_mii_bus);
> ?

Thanks for noticing. Yes, this would avoid a use-after-free.
Do you mind sending a patch to correct this?

Re: [PATCH 5.10 073/116] net: dsa: lantiq_gswip: dont use devres for mdiobus

[Alexey Khoroshilov]

On 15.02.2022 12:45, Vladimir Oltean wrote:
> On Tue, Feb 15, 2022 at 12:35:44PM +0300, Alexey Khoroshilov wrote:
>>>  	if (priv->ds->slave_mii_bus) {
>>>  		mdiobus_unregister(priv->ds->slave_mii_bus);
>>> +		mdiobus_free(priv->ds->slave_mii_bus);
>>>  		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
>>>  	}
>>
>>
>> Should
>>   of_node_put(priv->ds->slave_mii_bus->dev.of_node);
>> be here before
>>   mdiobus_free(priv->ds->slave_mii_bus);
>> ?
> 
> Thanks for noticing. Yes, this would avoid a use-after-free.
> Do you mind sending a patch to correct this?
> 

Surely, I will do.

--
Alexey

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Feb 14, 2022 at 10:24:59AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220213): 63 configs -> no new failure
arm (gcc version 11.2.1 20220213): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20220213): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220213): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/763
[2]. https://openqa.qa.codethink.co.uk/tests/765


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.10 000/116] 5.10.101-rc1 review

[Bagas Sanjaya]

On 14/02/22 16.24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.101 release.
> There are 116 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, clang 13.0.1)
and powerpc (ps3_defconfig, gcc 11.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara