[PATCH 5.16 000/203] 5.16.10-rc1 review

[PATCH 5.16 000/203] 5.16.10-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.16.10 release.
There are 203 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.16.10-rc1

Vijayanand Jitta <quic_vjitta@quicinc.com>
    iommu: Fix potential use-after-free during probe

Chia-Wei Wang <chiawei_wang@aspeedtech.com>
    docs/ABI: testing: aspeed-uart-routing: Escape asterisk

Masahiro Yamada <masahiroy@kernel.org>
    kconfig: fix missing fclose() on error paths

Song Liu <song@kernel.org>
    perf: Fix list corruption in perf_cgroup_switch()

Alexander Stein <alexander.stein@ew.tq-group.com>
    arm64: dts: imx8mq: fix lcdif port node

Thomas Bogendoerfer <tsbogend@alpha.franken.de>
    MIPS: octeon: Fix missed PTR->PTR_WD conversion

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Reduce log messages seen after firmware download

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

Nathan Chancellor <nathan@kernel.org>
    Makefile.extrawarn: Move -Wunaligned-access to W=1

Tadeusz Struk <tadeusz.struk@linaro.org>
    sched/fair: Fix fault in reweight_entity

Reinette Chatre <reinette.chatre@intel.com>
    x86/sgx: Silence softlockup detection when releasing large enclaves

Slark Xiao <slark_xiao@163.com>
    bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W

Slark Xiao <slark_xiao@163.com>
    bus: mhi: pci_generic: Add mru_default for Foxconn SDX55

Vineeth Vijayan <vneethv@linux.ibm.com>
    s390/cio: verify the driver availability for path_event call

Kees Cook <keescook@chromium.org>
    signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE

Kees Cook <keescook@chromium.org>
    seccomp: Invalidate seccomp mode to catch death failures

Roman Gushchin <guro@fb.com>
    mm: memcg: synchronize objcg lists with a dedicated spinlock

Mel Gorman <mgorman@suse.de>
    mm: vmscan: remove deadlock due to throttling failing to make progress

Yang Shi <shy828301@gmail.com>
    fs/proc: task_mmu.c: don't read mapcount for migration entry

Mathias Krause <minipli@grsecurity.net>
    iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL

Kishon Vijay Abraham I <kishon@ti.com>
    phy: ti: Fix missing sentinel for clk_div_table

Samuel Thibault <samuel.thibault@ens-lyon.org>
    speakup-dectlk: Restore pitch setting

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: add CPI Bulk Coin Recycler id

Johan Hovold <johan@kernel.org>
    USB: serial: cp210x: add NCR Retail IO box id

Stephan Brunner <s.brunner@stephan-brunner.net>
    USB: serial: ch341: add support for GW Instek USB2.0-Serial devices

Pawel Dembicki <paweldembicki@gmail.com>
    USB: serial: option: add ZTE MF286D modem

Cameron Williams <cang1@live.co.uk>
    USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320

Jann Horn <jannh@google.com>
    usb: raw-gadget: fix handling of dual-direction-capable endpoints

Pavel Hofman <pavel.hofman@ivitera.com>
    usb: gadget: f_uac2: Define specific wTerminalType

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    usb: gadget: rndis: check size of RNDIS_MSG_SET command

Szymon Heidrich <szymon.heidrich@gmail.com>
    USB: gadget: validate interface OS descriptor requests

Adam Ford <aford173@gmail.com>
    usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition

Udipto Goswami <quic_ugoswami@quicinc.com>
    usb: dwc3: gadget: Prevent core from processing stale TRBs

Sean Anderson <sean.anderson@seco.com>
    usb: ulpi: Call of_node_put correctly

Sean Anderson <sean.anderson@seco.com>
    usb: ulpi: Move of_node_put to ulpi_dev_release

Jann Horn <jannh@google.com>
    net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"

Fabrice Gasnier <fabrice.gasnier@foss.st.com>
    usb: dwc2: drd: fix soft connect when gadget is unconfigured

Jonas Malaco <jonas@protocubo.io>
    eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX

TATSUKAWA KOSUKE (立川 江介) <tatsu-ab1@nec.com>
    n_tty: wake up poll(POLLRDNORM) on receiving data

Jakob Koschel <jakobkoschel@gmail.com>
    vt_ioctl: add array_index_nospec to VT_ACTIVATE

Jakob Koschel <jakobkoschel@gmail.com>
    vt_ioctl: fix array_index_nospec in vt_setactivate

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister

Colin Foster <colin.foster@in-advantage.com>
    net: mscc: ocelot: fix mutex lock error during ethtool stats read

Dave Ertman <david.m.ertman@intel.com>
    ice: Avoid RTNL lock when re-creating auxiliary device

Dave Ertman <david.m.ertman@intel.com>
    ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler

Jesse Brandeburg <jesse.brandeburg@intel.com>
    ice: fix IPIP and SIT TSO offload

Dan Carpenter <dan.carpenter@oracle.com>
    ice: fix an error code in ice_cfg_phy_fec()

Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
    dpaa2-eth: unregister the netdev before disconnecting from the PHY

Kishen Maloor <kishen.maloor@intel.com>
    mptcp: netlink: process IPv6 addrs in creating listening sockets

Yang Wang <KevinYang.Wang@amd.com>
    drm/amd/pm: fix hwmon node of power1_label create issue

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: fix panic when DSA master device unbinds on shutdown

Raju Rangoju <Raju.Rangoju@amd.com>
    net: amd-xgbe: disable interrupts during pci removal

Jon Maloy <jmaloy@redhat.com>
    tipc: rate limit warning for received illegal binding update

Joel Stanley <joel@jms.id.au>
    net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE

Eric Dumazet <edumazet@google.com>
    veth: fix races around rq->rx_notify_masked

Antoine Tenart <atenart@kernel.org>
    net: fix a memleak when uncloning an skb dst and its metadata

Antoine Tenart <atenart@kernel.org>
    net: do not keep the dst cache when uncloning an skb dst and its metadata

Louis Peens <louis.peens@corigine.com>
    nfp: flower: fix ida_idx not being released

Eric Dumazet <edumazet@google.com>
    ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path

Cai Huoqing <cai.huoqing@linux.dev>
    net: ethernet: litex: Add the dependency on HAS_IOMEM

Sukadev Bhattiprolu <sukadev@linux.ibm.com>
    ibmvnic: don't release napi in __ibmvnic_open()

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: lantiq_gswip: don't use devres for mdiobus

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: seville: register the mdiobus under devres

Colin Foster <colin.foster@in-advantage.com>
    net: dsa: ocelot: seville: utilize of_mdiobus_register

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: felix: don't use devres for mdiobus

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: bcm_sf2: don't use devres for mdiobus

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: ar9331: register the mdiobus under devres

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: mv88e6xxx: don't use devres for mdiobus

Mahesh Bandewar <maheshb@google.com>
    bonding: pair enable_port with slave_arr_updates

Tao Liu <xliutaox@google.com>
    gve: Recording rx queue before sending to napi

NeilBrown <neilb@suse.de>
    SUNRPC: lock against ->sock changing during sysfs read

Helge Deller <deller@gmx.de>
    fbcon: Avoid 'cap' set but not used warning

Niklas Cassel <niklas.cassel@wdc.com>
    gpio: sifive: use the correct register to read output values

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    gpiolib: Never return internal error codes to user space

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE

Ilya Leoshkevich <iii@linux.ibm.com>
    s390/module: fix building test_modules_helpers.o with clang

Christoph Niedermaier <cniedermaier@dh-electronics.com>
    drm/panel: simple: Assign data from panel_dpi_probe() correctly

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: mscc: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP

Eric Dumazet <edumazet@google.com>
    tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case

Samuel Mendoza-Jonas <samjonas@amazon.com>
    ixgbevf: Require large buffers for build_skb on 82599VF

Lutz Koschorreck <theleks@ko-hh.de>
    arm64: dts: meson-sm1-odroid: fix boot loop after reboot

Dongjin Kim <tobetter@gmail.com>
    arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2

Lutz Koschorreck <theleks@ko-hh.de>
    arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator

Dongjin Kim <tobetter@gmail.com>
    arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'

Florian Westphal <fw@strlen.de>
    netfilter: ctnetlink: disable helper autoassign

Florian Westphal <fw@strlen.de>
    netfilter: nft_payload: don't allow th access for fragments

Steen Hegelund <steen.hegelund@microchip.com>
    net: sparx5: Fix get_stat64 crash in tcpdump

Mathias Krause <minipli@grsecurity.net>
    misc: fastrpc: avoid double fput() on failed usercopy

Dave Stevenson <dave.stevenson@raspberrypi.com>
    drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Avoid duplicate uncached readdir calls on eof

trondmy@kernel.org <trondmy@kernel.org>
    NFS: Don't skip directory entries when doing uncached readdir

trondmy@kernel.org <trondmy@kernel.org>
    NFS: Don't overfill uncached readdir pages

Geert Uytterhoeven <geert+renesas@glider.be>
    gpio: aggregator: Fix calling into sleeping GPIO controllers

Liu Ying <victor.liu@nxp.com>
    phy: dphy: Correct clk_pre parameter

Mark Brown <broonie@kernel.org>
    arm64: Enable Cortex-A510 erratum 2051678 by default

Udipto Goswami <quic_ugoswami@quicinc.com>
    usb: f_fs: Fix use-after-free for epfile

Martin Kepplinger <martink@posteo.de>
    arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers

Rob Herring <robh@kernel.org>
    ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo

Dan Carpenter <dan.carpenter@oracle.com>
    phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()

Robert Hancock <robert.hancock@calian.com>
    phy: xilinx: zynqmp: Fix bus width setting for SGMII

Fabio Estevam <festevam@gmail.com>
    ARM: dts: imx6qdl-udoo: Properly describe the SD card detect

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    staging: fbtft: Fix error path in fbtft_driver_module_init()

Jens Wiklander <jens.wiklander@linaro.org>
    optee: add error checks in optee_ffa_do_call_with_arg()

Jerome Forissier <jerome@forissier.org>
    tee: optee: do not check memref size on return from Secure World

Al Cooper <alcooperx@gmail.com>
    phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson8b: Fix the UART device-tree schema validation

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson8: Fix the UART device-tree schema validation

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson: Fix the UART compatible strings

Tony Lindgren <tony@atomide.com>
    ARM: dts: Fix timer regression for beagleboard revision c

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Populate pipe dbuf slices more accurately during readout

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Disable DRRS on IVB/HSW port != A

Brian Norris <briannorris@chromium.org>
    drm/rockchip: vop: Correct RK3399 VOP register fields

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/display: change pipe policy for DCN 2.0

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    PM: s2idle: ACPI: Fix wakeup interrupts handling

Robin Murphy <robin.murphy@arm.com>
    ACPI/IORT: Check node revision for PMCG resources

Sagi Grimberg <sagi@grimberg.me>
    nvme-tcp: fix bogus request completion when failing to send AER

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    ARM: socfpga: fix missing RESET_CONTROLLER

Linus Walleij <linus.walleij@linaro.org>
    ARM: dts: Fix boot regression on Skomer

Fabio Estevam <festevam@gmail.com>
    ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group

Bjorn Helgaas <bhelgaas@google.com>
    Revert "PCI/portdrv: Do not setup up IRQs if there are no users"

Andreas Gruenbacher <agruenba@redhat.com>
    Revert "gfs2: check context in gfs2_glock_put"

Bob Peterson <rpeterso@redhat.com>
    gfs2: Fix gfs2_release for non-writers regression

Changbin Du <changbin.du@intel.com>
    riscv: eliminate unreliable __builtin_frame_address(1)

Palmer Dabbelt <palmer@rivosinc.com>
    riscv/mm: Add XIP_FIXUP for phys_ram_base

Pingfan Liu <kernelfans@gmail.com>
    riscv: cpu-hotplug: clear cpu from numa map when teardown

Myrtle Shah <gatecat@ds0.me>
    riscv: Fix XIP_FIXUP_FLASH_OFFSET

Aurelien Jarno <aurelien@aurel32.net>
    riscv: fix build with binutils 2.38

Jim Mattson <jmattson@google.com>
    KVM: x86: Report deprecated x87 features in supported CPUID

Sean Christopherson <seanjc@google.com>
    KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow

Sean Christopherson <seanjc@google.com>
    KVM: SVM: Don't kill SEV guest if SMAP erratum triggers in usermode

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER

Hou Wenlong <houwenlong93@linux.alibaba.com>
    KVM: eventfd: Fix false positive RCU usage warning

Marco Elver <elver@google.com>
    kasan: test: fix compatibility with FORTIFY_SOURCE

James Morse <james.morse@arm.com>
    arm64: cpufeature: List early Cortex-A510 parts as having broken dbm

Anshuman Khandual <anshuman.khandual@arm.com>
    arm64: errata: Add detection for TRBE trace data corruption

Anshuman Khandual <anshuman.khandual@arm.com>
    arm64: errata: Add detection for TRBE invalid prohibited states

Anshuman Khandual <anshuman.khandual@arm.com>
    arm64: errata: Add detection for TRBE ignored system register writes

Jisheng Zhang <jszhang@kernel.org>
    net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()

Thomas Bogendoerfer <tsbogend@alpha.franken.de>
    MIPS: Fix build error due to PTR used in more places

Wu Zheng <wu.zheng@intel.com>
    nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs

James Clark <james.clark@arm.com>
    perf: Always wake the parent event

Amelie Delaunay <amelie.delaunay@foss.st.com>
    usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/display: use msleep rather than udelay for long delays

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/display: adjust msleep limit in dp_wait_for_training_aux_rd_interval

Zhan Liu <zhan.liu@amd.com>
    drm/amd/display: Correct MPC split policy for DCN301

Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
    PM: hibernate: Remove register_nosave_region_late()

Jisheng Zhang <jszhang@kernel.org>
    net: stmmac: reduce unnecessary wakeups from eee sw timer

Tong Zhang <ztong0001@gmail.com>
    scsi: myrs: Fix crash in error case

Kiwoong Kim <kwmad.kim@samsung.com>
    scsi: ufs: Treat link loss as fatal error

Kiwoong Kim <kwmad.kim@samsung.com>
    scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()

John Garry <john.garry@huawei.com>
    scsi: pm8001: Fix bogus FW crash for maxcpus=1

Saurav Kashyap <skashyap@marvell.com>
    scsi: qedf: Change context reset messages to ratelimited

Saurav Kashyap <skashyap@marvell.com>
    scsi: qedf: Fix refcount issue when LOGO is received during TMF

Saurav Kashyap <skashyap@marvell.com>
    scsi: qedf: Add stag_work to all the vports

Xiaoke Wang <xkernel.wang@foxmail.com>
    scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()

ZouMingzhe <mingzhe.zou@easystack.cn>
    scsi: target: iscsi: Make sure the np under each tpg is unique

Anshuman Khandual <anshuman.khandual@arm.com>
    arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 ranges

Anshuman Khandual <anshuman.khandual@arm.com>
    arm64: Add Cortex-X2 CPU part definition

Ilya Leoshkevich <iii@linux.ibm.com>
    s390/module: test loading modules with a lot of relocations

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/fixmap: Fix VM debug warning on unmap

Victor Nogueira <victor@mojatatu.com>
    net: sched: Clarify error message when qdisc kind is unknown

Raymond Jay Golo <rjgolo@gmail.com>
    drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer

Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
    drm/vc4: Fix deadlock on DSI device attach error

Peter Zijlstra <peterz@infradead.org>
    sched: Avoid double preemption in __cond_resched_*lock*()

Andi Kleen <ak@linux.intel.com>
    x86/perf: Avoid warning for Arch LBR without XSAVE

Stephane Eranian <eranian@google.com>
    perf/x86/rapl: fix AMD event handling

Sander Vanheule <sander@svanheule.net>
    irqchip/realtek-rtl: Service all pending interrupts

Anna Schumaker <Anna.Schumaker@Netapp.com>
    sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()

Xiyu Yang <xiyuyang19@fudan.edu.cn>
    net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change

Olga Kornievskaia <kolga@netapp.com>
    SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 handle port presence in fs_location server string

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 expose nfs_parse_server_name function

Olga Kornievskaia <kolga@netapp.com>
    NFSv4.1 query for fs_location attr on a new file system

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 store server support for fs_location attribute

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 remove zero number of fs_locations entries error check

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.1: Fix uninitialised variable in devicenotify

Xiaoke Wang <xkernel.wang@foxmail.com>
    nfs: nfs4clinet: check the return value of kstrdup()

Olga Kornievskaia <kolga@netapp.com>
    NFSv4 only print the label when its queried

NeilBrown <neilb@suse.de>
    NFS: change nfs_access_get_cached to only report the mask

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Fix the behavior of READ near OFFSET_MAX

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Fix offset type in I/O trace points

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Clamp WRITE offsets

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Fix ia_size underflow

Chuck Lever <chuck.lever@oracle.com>
    NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Fix initialisation of nfs_client cl_flags field

Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
    net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
    net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: fix error path in isotp_sendmsg() to unlock wait queue

Oliver Hartkopp <socketcan@hartkopp.net>
    can: isotp: fix potential CAN frame reception race in isotp_rcv()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    mmc: sh_mmcif: Check for null res pointer

Andrey Skvortsov <andrej.skvortzov@gmail.com>
    mmc: core: Wait for command setting 'Power Off Notification' bit to complete

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    mmc: sdhci-of-esdhc: Check for error num after setting mask

Stefan Berger <stefanb@linux.ibm.com>
    ima: Do not print policy rule with inactive LSM labels

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Allow template selection with ima_template[_fmt]= after ima_hash=

Stefan Berger <stefanb@linux.ibm.com>
    ima: Remove ima_policy file before directory

Eric Biggers <ebiggers@google.com>
    ima: fix reference leak in asymmetric_verify()

Paul Moore <paul@paul-moore.com>
    audit: don't deref the syscall args when checking the openat2 open_how::flags

Xiaoke Wang <xkernel.wang@foxmail.com>
    integrity: check the return value of audit_log_start()


-------------

Diffstat:

 .../ABI/testing/sysfs-driver-aspeed-uart-routing   |   6 +-
 Documentation/arm64/silicon-errata.rst             |  12 ++
 .../devicetree/bindings/arm/omap/omap.txt          |   3 +
 Makefile                                           |   4 +-
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/imx23-evk.dts                    |   1 -
 arch/arm/boot/dts/imx6qdl-udoo.dtsi                |   5 +-
 arch/arm/boot/dts/imx7ulp.dtsi                     |   2 +-
 arch/arm/boot/dts/meson.dtsi                       |   8 +-
 arch/arm/boot/dts/meson8.dtsi                      |  24 +--
 arch/arm/boot/dts/meson8b.dtsi                     |  24 +--
 arch/arm/boot/dts/omap3-beagle-ab4.dts             |  47 ++++++
 arch/arm/boot/dts/omap3-beagle.dts                 |  33 ----
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts     |   4 -
 arch/arm/mach-socfpga/Kconfig                      |   2 +
 arch/arm64/Kconfig                                 |  82 +++++++++-
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi     |   4 +-
 .../boot/dts/amlogic/meson-sm1-bananapi-m5.dts     |   2 +-
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi  |   2 +-
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  10 +-
 arch/arm64/include/asm/cputype.h                   |   2 +
 arch/arm64/kernel/cpu_errata.c                     |  29 ++++
 arch/arm64/kernel/cpufeature.c                     |   3 +
 arch/arm64/tools/cpucaps                           |   3 +
 arch/mips/cavium-octeon/octeon-memcpy.S            |   2 +-
 arch/mips/include/asm/asm.h                        |   4 +-
 arch/mips/include/asm/ftrace.h                     |   4 +-
 arch/mips/include/asm/r4kcache.h                   |   4 +-
 arch/mips/include/asm/unaligned-emul.h             | 176 ++++++++++-----------
 arch/mips/kernel/mips-r2-to-r6-emul.c              | 104 ++++++------
 arch/mips/kernel/r2300_fpu.S                       |   6 +-
 arch/mips/kernel/r4k_fpu.S                         |   2 +-
 arch/mips/kernel/relocate_kernel.S                 |  22 +--
 arch/mips/kernel/scall32-o32.S                     |  10 +-
 arch/mips/kernel/scall64-n32.S                     |   2 +-
 arch/mips/kernel/scall64-n64.S                     |   2 +-
 arch/mips/kernel/scall64-o32.S                     |  10 +-
 arch/mips/kernel/syscall.c                         |   8 +-
 arch/mips/lib/csum_partial.S                       |   4 +-
 arch/mips/lib/memcpy.S                             |   4 +-
 arch/mips/lib/memset.S                             |   2 +-
 arch/mips/lib/strncpy_user.S                       |   4 +-
 arch/mips/lib/strnlen_user.S                       |   2 +-
 arch/powerpc/include/asm/book3s/32/pgtable.h       |   1 +
 arch/powerpc/include/asm/book3s/64/pgtable.h       |   2 +
 arch/powerpc/include/asm/fixmap.h                  |   6 +-
 arch/powerpc/include/asm/nohash/32/pgtable.h       |   1 +
 arch/powerpc/include/asm/nohash/64/pgtable.h       |   1 +
 arch/powerpc/mm/pgtable.c                          |   9 ++
 arch/riscv/Makefile                                |   6 +
 arch/riscv/kernel/cpu-hotplug.c                    |   2 +
 arch/riscv/kernel/head.S                           |  11 +-
 arch/riscv/kernel/stacktrace.c                     |   9 +-
 arch/riscv/mm/init.c                               |   1 +
 arch/s390/Kconfig                                  |  15 ++
 arch/s390/lib/Makefile                             |   3 +
 arch/s390/lib/test_modules.c                       |  32 ++++
 arch/s390/lib/test_modules.h                       |  53 +++++++
 arch/s390/lib/test_modules_helpers.c               |  13 ++
 arch/x86/events/intel/lbr.c                        |   3 +
 arch/x86/events/rapl.c                             |   9 +-
 arch/x86/kernel/cpu/sgx/encl.c                     |   2 +
 arch/x86/kvm/cpuid.c                               |  13 +-
 arch/x86/kvm/svm/svm.c                             |  16 +-
 arch/x86/kvm/vmx/evmcs.c                           |   1 +
 arch/x86/kvm/vmx/evmcs.h                           |   4 +-
 arch/x86/kvm/vmx/vmx.c                             |  25 +++
 drivers/accessibility/speakup/speakup_dectlk.c     |   1 +
 drivers/acpi/arm64/iort.c                          |  14 +-
 drivers/acpi/ec.c                                  |  10 ++
 drivers/acpi/sleep.c                               |  15 +-
 drivers/base/power/wakeup.c                        |  41 ++++-
 drivers/bus/mhi/pci_generic.c                      |   2 +
 drivers/clocksource/timer-ti-dm-systimer.c         |   2 +-
 drivers/gpio/gpio-aggregator.c                     |  18 ++-
 drivers/gpio/gpio-sifive.c                         |   2 +-
 drivers/gpio/gpiolib-cdev.c                        |   6 +-
 drivers/gpio/gpiolib-sysfs.c                       |   7 +-
 drivers/gpio/gpiolib.h                             |  12 ++
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |   6 +-
 .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c  |   2 +-
 .../drm/amd/display/dc/dcn301/dcn301_resource.c    |   2 +-
 drivers/gpu/drm/amd/pm/amdgpu_pm.c                 |   3 +-
 drivers/gpu/drm/bridge/nwl-dsi.c                   |  12 +-
 drivers/gpu/drm/drm_panel_orientation_quirks.c     |  12 ++
 drivers/gpu/drm/i915/display/intel_display.c       |   1 +
 drivers/gpu/drm/i915/display/intel_drrs.c          |   8 +
 drivers/gpu/drm/i915/intel_pm.c                    | 143 ++++++++++++++---
 drivers/gpu/drm/i915/intel_pm.h                    |   1 +
 drivers/gpu/drm/panel/panel-simple.c               |   1 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c        |   8 +-
 drivers/gpu/drm/vc4/vc4_dsi.c                      |  14 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c                     |   2 +
 drivers/iio/industrialio-buffer.c                  |  14 +-
 drivers/iommu/iommu.c                              |   9 +-
 drivers/irqchip/irq-realtek-rtl.c                  |   8 +-
 drivers/misc/eeprom/ee1004.c                       |   3 +
 drivers/misc/fastrpc.c                             |   9 +-
 drivers/mmc/core/sd.c                              |   8 +-
 drivers/mmc/host/sdhci-of-esdhc.c                  |   8 +-
 drivers/mmc/host/sh_mmcif.c                        |   3 +
 drivers/net/bonding/bond_3ad.c                     |   3 +-
 drivers/net/dsa/bcm_sf2.c                          |   7 +-
 drivers/net/dsa/lantiq_gswip.c                     |  14 +-
 drivers/net/dsa/mt7530.c                           |   2 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |  15 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c             |   4 +-
 drivers/net/dsa/ocelot/seville_vsc9953.c           |   6 +-
 drivers/net/dsa/qca/ar9331.c                       |   3 +-
 drivers/net/ethernet/amd/xgbe/xgbe-pci.c           |   3 +
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |   4 +-
 drivers/net/ethernet/google/gve/gve_rx.c           |   1 +
 drivers/net/ethernet/ibm/ibmvnic.c                 |  13 +-
 drivers/net/ethernet/intel/ice/ice.h               |   3 +-
 drivers/net/ethernet/intel/ice/ice_common.c        |   3 +-
 drivers/net/ethernet/intel/ice/ice_lag.c           |  34 +++-
 drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h     |   1 +
 drivers/net/ethernet/intel/ice/ice_main.c          |  28 +++-
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c  |  13 +-
 drivers/net/ethernet/litex/Kconfig                 |   2 +-
 .../net/ethernet/microchip/sparx5/sparx5_ethtool.c |   2 +-
 drivers/net/ethernet/mscc/ocelot.c                 |  19 ++-
 .../ethernet/netronome/nfp/flower/tunnel_conf.c    |  12 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |   2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  13 +-
 drivers/net/mdio/mdio-aspeed.c                     |   1 +
 drivers/net/phy/marvell.c                          |  17 +-
 drivers/net/usb/ax88179_178a.c                     |  68 ++++----
 drivers/net/veth.c                                 |  13 +-
 drivers/nvme/host/pci.c                            |   3 +-
 drivers/nvme/host/tcp.c                            |  10 +-
 drivers/pci/pcie/portdrv_core.c                    |  47 ++----
 drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c      |   3 +-
 drivers/phy/broadcom/Kconfig                       |   3 +-
 drivers/phy/phy-core-mipi-dphy.c                   |   4 +-
 drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c   |   3 +-
 drivers/phy/st/phy-stm32-usbphyc.c                 |   2 +-
 drivers/phy/ti/phy-j721e-wiz.c                     |   1 +
 drivers/phy/xilinx/phy-zynqmp.c                    |  11 +-
 drivers/s390/cio/device.c                          |   2 +-
 drivers/scsi/lpfc/lpfc.h                           |  13 +-
 drivers/scsi/lpfc/lpfc_attr.c                      |   4 +-
 drivers/scsi/lpfc/lpfc_init.c                      |   2 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |   8 +-
 drivers/scsi/myrs.c                                |   3 +-
 drivers/scsi/pm8001/pm80xx_hwi.c                   |  16 +-
 drivers/scsi/pm8001/pm80xx_hwi.h                   |   6 +-
 drivers/scsi/qedf/qedf_io.c                        |   1 +
 drivers/scsi/qedf/qedf_main.c                      |   7 +-
 drivers/scsi/ufs/ufshcd-pltfrm.c                   |   7 +
 drivers/scsi/ufs/ufshcd.c                          |   9 +-
 drivers/scsi/ufs/ufshci.h                          |   3 +-
 drivers/staging/fbtft/fbtft.h                      |   5 +-
 drivers/target/iscsi/iscsi_target_tpg.c            |   3 +
 drivers/tee/optee/ffa_abi.c                        |  15 +-
 drivers/tee/optee/smc_abi.c                        |  10 --
 drivers/tty/n_tty.c                                |   4 +-
 drivers/tty/vt/vt_ioctl.c                          |   3 +-
 drivers/usb/common/ulpi.c                          |  10 +-
 drivers/usb/dwc2/gadget.c                          |   2 +-
 drivers/usb/dwc3/gadget.c                          |  13 ++
 drivers/usb/gadget/composite.c                     |   3 +
 drivers/usb/gadget/function/f_fs.c                 |  56 +++++--
 drivers/usb/gadget/function/f_uac2.c               |   4 +-
 drivers/usb/gadget/function/rndis.c                |   9 +-
 drivers/usb/gadget/legacy/raw_gadget.c             |   2 +-
 drivers/usb/gadget/udc/renesas_usb3.c              |   2 +
 drivers/usb/serial/ch341.c                         |   1 +
 drivers/usb/serial/cp210x.c                        |   2 +
 drivers/usb/serial/ftdi_sio.c                      |   3 +
 drivers/usb/serial/ftdi_sio_ids.h                  |   3 +
 drivers/usb/serial/option.c                        |   2 +
 drivers/video/fbdev/core/fbcon.c                   |   7 +-
 fs/gfs2/file.c                                     |   7 +-
 fs/gfs2/glock.c                                    |   3 -
 fs/nfs/callback.h                                  |   2 +-
 fs/nfs/callback_proc.c                             |   2 +-
 fs/nfs/callback_xdr.c                              |  18 +--
 fs/nfs/client.c                                    |   9 +-
 fs/nfs/dir.c                                       |  44 ++++--
 fs/nfs/nfs4_fs.h                                   |  12 +-
 fs/nfs/nfs4client.c                                |   5 +-
 fs/nfs/nfs4namespace.c                             |  19 ++-
 fs/nfs/nfs4proc.c                                  |  96 ++++++++---
 fs/nfs/nfs4state.c                                 |   6 +-
 fs/nfs/nfs4xdr.c                                   |   9 +-
 fs/nfsd/nfs3proc.c                                 |  13 +-
 fs/nfsd/nfs3xdr.c                                  |   2 +-
 fs/nfsd/nfs4proc.c                                 |  13 +-
 fs/nfsd/nfs4xdr.c                                  |   8 +-
 fs/nfsd/trace.h                                    |  14 +-
 fs/nfsd/vfs.c                                      |   4 +
 fs/proc/task_mmu.c                                 |  40 +++--
 include/linux/memcontrol.h                         |   5 +-
 include/linux/nfs_fs.h                             |   5 +-
 include/linux/nfs_fs_sb.h                          |   2 +-
 include/linux/nfs_xdr.h                            |   1 +
 include/linux/suspend.h                            |  15 +-
 include/net/dst_metadata.h                         |  14 +-
 include/uapi/linux/netfilter/nf_conntrack_common.h |   2 +-
 kernel/auditsc.c                                   |   2 +-
 kernel/events/core.c                               |  16 +-
 kernel/power/main.c                                |   5 +-
 kernel/power/process.c                             |   2 +-
 kernel/power/snapshot.c                            |  21 +--
 kernel/power/suspend.c                             |   2 -
 kernel/sched/core.c                                |  23 ++-
 kernel/seccomp.c                                   |  10 ++
 kernel/signal.c                                    |   5 +-
 lib/test_kasan.c                                   |   5 +
 mm/memcontrol.c                                    |  10 +-
 mm/vmscan.c                                        |   4 +-
 net/can/isotp.c                                    |  29 +++-
 net/dsa/dsa2.c                                     |  25 +--
 net/ipv4/ipmr.c                                    |   2 +
 net/ipv4/tcp.c                                     |  33 ++--
 net/ipv6/ip6mr.c                                   |   2 +
 net/mptcp/pm_netlink.c                             |   8 +-
 net/netfilter/nf_conntrack_netlink.c               |   3 +-
 net/netfilter/nft_exthdr.c                         |   2 +-
 net/netfilter/nft_payload.c                        |   9 +-
 net/sched/sch_api.c                                |   2 +-
 net/sunrpc/clnt.c                                  |   5 +-
 net/sunrpc/sysfs.c                                 |  46 +++---
 net/sunrpc/xprtsock.c                              |   7 +-
 net/tipc/name_distr.c                              |   2 +-
 scripts/Makefile.extrawarn                         |   1 +
 scripts/kconfig/confdata.c                         |  12 +-
 security/integrity/digsig_asymmetric.c             |  15 +-
 security/integrity/ima/ima_fs.c                    |   2 +-
 security/integrity/ima/ima_policy.c                |   8 +
 security/integrity/ima/ima_template.c              |  10 +-
 security/integrity/integrity_audit.c               |   2 +
 virt/kvm/eventfd.c                                 |   8 +-
 234 files changed, 1811 insertions(+), 860 deletions(-)

[PATCH 5.16 001/203] integrity: check the return value of audit_log_start()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

commit 83230351c523b04ff8a029a4bdf97d881ecb96fc upstream.

audit_log_start() returns audit_buffer pointer on success or NULL on
error, so it is better to check the return value of it.

Fixes: 3323eec921ef ("integrity: IMA as an integrity service provider")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/integrity_audit.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/security/integrity/integrity_audit.c
+++ b/security/integrity/integrity_audit.c
@@ -45,6 +45,8 @@ void integrity_audit_message(int audit_m
 		return;
 
 	ab = audit_log_start(audit_context(), GFP_KERNEL, audit_msgno);
+	if (!ab)
+		return;
 	audit_log_format(ab, "pid=%d uid=%u auid=%u ses=%u",
 			 task_pid_nr(current),
 			 from_kuid(&init_user_ns, current_uid()),

[PATCH 5.16 002/203] audit: dont deref the syscall args when checking the openat2 open_how::flags

[Greg Kroah-Hartman]

From: Paul Moore <paul@paul-moore.com>

commit 7a82f89de92aac5a244d3735b2bd162c1147620c upstream.

As reported by Jeff, dereferencing the openat2 syscall argument in
audit_match_perm() to obtain the open_how::flags can result in an
oops/page-fault.  This patch fixes this by using the open_how struct
that we store in the audit_context with audit_openat2_how().

Independent of this patch, Richard Guy Briggs posted a similar patch
to the audit mailing list roughly 40 minutes after this patch was
posted.

Cc: stable@vger.kernel.org
Fixes: 1c30e3af8a79 ("audit: add support for the openat2 syscall")
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/auditsc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -185,7 +185,7 @@ static int audit_match_perm(struct audit
 	case AUDITSC_EXECVE:
 		return mask & AUDIT_PERM_EXEC;
 	case AUDITSC_OPENAT2:
-		return mask & ACC_MODE((u32)((struct open_how *)ctx->argv[2])->flags);
+		return mask & ACC_MODE((u32)ctx->openat2.flags);
 	default:
 		return 0;
 	}

[PATCH 5.16 003/203] ima: fix reference leak in asymmetric_verify()

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 926fd9f23b27ca6587492c3f58f4c7f4cd01dad5 upstream.

Don't leak a reference to the key if its algorithm is unknown.

Fixes: 947d70597236 ("ima: Support EC keys for signature verification")
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/digsig_asymmetric.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/security/integrity/digsig_asymmetric.c
+++ b/security/integrity/digsig_asymmetric.c
@@ -109,22 +109,25 @@ int asymmetric_verify(struct key *keyrin
 
 	pk = asymmetric_key_public_key(key);
 	pks.pkey_algo = pk->pkey_algo;
-	if (!strcmp(pk->pkey_algo, "rsa"))
+	if (!strcmp(pk->pkey_algo, "rsa")) {
 		pks.encoding = "pkcs1";
-	else if (!strncmp(pk->pkey_algo, "ecdsa-", 6))
+	} else if (!strncmp(pk->pkey_algo, "ecdsa-", 6)) {
 		/* edcsa-nist-p192 etc. */
 		pks.encoding = "x962";
-	else if (!strcmp(pk->pkey_algo, "ecrdsa") ||
-		   !strcmp(pk->pkey_algo, "sm2"))
+	} else if (!strcmp(pk->pkey_algo, "ecrdsa") ||
+		   !strcmp(pk->pkey_algo, "sm2")) {
 		pks.encoding = "raw";
-	else
-		return -ENOPKG;
+	} else {
+		ret = -ENOPKG;
+		goto out;
+	}
 
 	pks.digest = (u8 *)data;
 	pks.digest_size = datalen;
 	pks.s = hdr->sig;
 	pks.s_size = siglen;
 	ret = verify_signature(key, &pks);
+out:
 	key_put(key);
 	pr_debug("%s() = %d\n", __func__, ret);
 	return ret;

[PATCH 5.16 004/203] ima: Remove ima_policy file before directory

[Greg Kroah-Hartman]

From: Stefan Berger <stefanb@linux.ibm.com>

commit f7333b9572d0559e00352a926c92f29f061b4569 upstream.

The removal of ima_dir currently fails since ima_policy still exists, so
remove the ima_policy file before removing the directory.

Fixes: 4af4662fa4a9 ("integrity: IMA policy")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/ima_fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -496,12 +496,12 @@ int __init ima_fs_init(void)
 
 	return 0;
 out:
+	securityfs_remove(ima_policy);
 	securityfs_remove(violations);
 	securityfs_remove(runtime_measurements_count);
 	securityfs_remove(ascii_runtime_measurements);
 	securityfs_remove(binary_runtime_measurements);
 	securityfs_remove(ima_symlink);
 	securityfs_remove(ima_dir);
-	securityfs_remove(ima_policy);
 	return -1;
 }

[PATCH 5.16 005/203] ima: Allow template selection with ima_template[_fmt]= after ima_hash=

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit bb8e52e4906f148c2faf6656b5106cf7233e9301 upstream.

Commit c2426d2ad5027 ("ima: added support for new kernel cmdline parameter
ima_template_fmt") introduced an additional check on the ima_template
variable to avoid multiple template selection.

Unfortunately, ima_template could be also set by the setup function of the
ima_hash= parameter, when it calls ima_template_desc_current(). This causes
attempts to choose a new template with ima_template= or with
ima_template_fmt=, after ima_hash=, to be ignored.

Achieve the goal of the commit mentioned with the new static variable
template_setup_done, so that template selection requests after ima_hash=
are not ignored.

Finally, call ima_init_template_list(), if not already done, to initialize
the list of templates before lookup_template_desc() is called.

Reported-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Fixes: c2426d2ad5027 ("ima: added support for new kernel cmdline parameter ima_template_fmt")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/ima_template.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/security/integrity/ima/ima_template.c
+++ b/security/integrity/ima/ima_template.c
@@ -29,6 +29,7 @@ static struct ima_template_desc builtin_
 
 static LIST_HEAD(defined_templates);
 static DEFINE_SPINLOCK(template_list);
+static int template_setup_done;
 
 static const struct ima_template_field supported_fields[] = {
 	{.field_id = "d", .field_init = ima_eventdigest_init,
@@ -101,10 +102,11 @@ static int __init ima_template_setup(cha
 	struct ima_template_desc *template_desc;
 	int template_len = strlen(str);
 
-	if (ima_template)
+	if (template_setup_done)
 		return 1;
 
-	ima_init_template_list();
+	if (!ima_template)
+		ima_init_template_list();
 
 	/*
 	 * Verify that a template with the supplied name exists.
@@ -128,6 +130,7 @@ static int __init ima_template_setup(cha
 	}
 
 	ima_template = template_desc;
+	template_setup_done = 1;
 	return 1;
 }
 __setup("ima_template=", ima_template_setup);
@@ -136,7 +139,7 @@ static int __init ima_template_fmt_setup
 {
 	int num_templates = ARRAY_SIZE(builtin_templates);
 
-	if (ima_template)
+	if (template_setup_done)
 		return 1;
 
 	if (template_desc_init_fields(str, NULL, NULL) < 0) {
@@ -147,6 +150,7 @@ static int __init ima_template_fmt_setup
 
 	builtin_templates[num_templates - 1].fmt = str;
 	ima_template = builtin_templates + num_templates - 1;
+	template_setup_done = 1;
 
 	return 1;
 }

[PATCH 5.16 006/203] ima: Do not print policy rule with inactive LSM labels

[Greg Kroah-Hartman]

From: Stefan Berger <stefanb@linux.ibm.com>

commit 89677197ae709eb1ab3646952c44f6a171c9e74c upstream.

Before printing a policy rule scan for inactive LSM labels in the policy
rule. Inactive LSM labels are identified by args_p != NULL and
rule == NULL.

Fixes: 483ec26eed42 ("ima: ima/lsm policy rule loading logic bug fixes")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: Christian Brauner <brauner@kernel.org>
[zohar@linux.ibm.com: Updated "Fixes" tag]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/ima_policy.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -1967,6 +1967,14 @@ int ima_policy_show(struct seq_file *m,
 
 	rcu_read_lock();
 
+	/* Do not print rules with inactive LSM labels */
+	for (i = 0; i < MAX_LSM_RULES; i++) {
+		if (entry->lsm[i].args_p && !entry->lsm[i].rule) {
+			rcu_read_unlock();
+			return 0;
+		}
+	}
+
 	if (entry->action & MEASURE)
 		seq_puts(m, pt(Opt_measure));
 	if (entry->action & DONT_MEASURE)

[PATCH 5.16 007/203] mmc: sdhci-of-esdhc: Check for error num after setting mask

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit 40c67c291a93f8846c4a972c9ef1b7ba4544c8d0 upstream.

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
And since the sdhci_setup_host() has already checked the return value of
the enable_dma, we need not check it in sdhci_resume_host() again.

Fixes: 5552d7ad596c ("mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220112083156.1124782-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-of-esdhc.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -524,12 +524,16 @@ static void esdhc_of_adma_workaround(str
 
 static int esdhc_of_enable_dma(struct sdhci_host *host)
 {
+	int ret;
 	u32 value;
 	struct device *dev = mmc_dev(host->mmc);
 
 	if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") ||
-	    of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc"))
-		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+	    of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) {
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+		if (ret)
+			return ret;
+	}
 
 	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
 

[PATCH 5.16 008/203] mmc: core: Wait for command setting Power Off Notification bit to complete

[Greg Kroah-Hartman]

From: Andrey Skvortsov <andrej.skvortzov@gmail.com>

commit 379f56c24e698f14242f532b1d0a0f1747725e08 upstream.

SD card is allowed to signal busy on DAT0 up to 1s after the
CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host
waits until busy of CMD49 is released and only then polls Power
Management Status register up to 1s until the card indicates ready to
power off.

Without waiting for busy before polling status register sometimes card
becomes unresponsive and system fails to suspend:

  [  205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  [  206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command
  [  206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed
  [  206.421347] mmc0: error -110 reading status reg of PM func
  [  206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110
  [  206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110
  [  206.437064] PM: Some devices failed to suspend, or early wake event detected

Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 2c5d42769038 ("mmc: core: Add support for Power Off Notification for SD cards")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/sd.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -67,7 +67,7 @@ static const unsigned int sd_au_size[] =
 		__res & __mask;						\
 	})
 
-#define SD_POWEROFF_NOTIFY_TIMEOUT_MS 2000
+#define SD_POWEROFF_NOTIFY_TIMEOUT_MS 1000
 #define SD_WRITE_EXTR_SINGLE_TIMEOUT_MS 1000
 
 struct sd_busy_data {
@@ -1664,6 +1664,12 @@ static int sd_poweroff_notify(struct mmc
 		goto out;
 	}
 
+	/* Find out when the command is completed. */
+	err = mmc_poll_for_busy(card, SD_WRITE_EXTR_SINGLE_TIMEOUT_MS, false,
+				MMC_BUSY_EXTR_SINGLE);
+	if (err)
+		goto out;
+
 	cb_data.card = card;
 	cb_data.reg_buf = reg_buf;
 	err = __mmc_poll_for_busy(card, SD_POWEROFF_NOTIFY_TIMEOUT_MS,

[PATCH 5.16 009/203] mmc: sh_mmcif: Check for null res pointer

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit 4d315357b3d6c315a7260420c6c6fc076e58d14b upstream.

If there is no suitable resource, platform_get_resource() will return
NULL.
Therefore in order to avoid the dereference of the NULL pointer, it
should be better to check the 'res'.

Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Cc: stable@vger.kernel.org # v5.16+
Link: https://lore.kernel.org/r/20220119120006.1426964-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sh_mmcif.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -405,6 +405,9 @@ static int sh_mmcif_dma_slave_config(str
 	struct dma_slave_config cfg = { 0, };
 
 	res = platform_get_resource(host->pd, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
 	cfg.direction = direction;
 
 	if (direction == DMA_DEV_TO_MEM) {

[PATCH 5.16 010/203] can: isotp: fix potential CAN frame reception race in isotp_rcv()

[Greg Kroah-Hartman]

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 7c759040c1dd03954f650f147ae7175476d51314 upstream.

When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.

Ziyang Xuan writes:

The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().

=======================================================
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0
RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113
Call Trace:
 <TASK>
 skb_over_panic net/core/skbuff.c:118 [inline]
 skb_put.cold+0x24/0x24 net/core/skbuff.c:1990
 isotp_rcv_cf net/can/isotp.c:570 [inline]
 isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668
 deliver net/can/af_can.c:574 [inline]
 can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635
 can_receive+0x31d/0x580 net/can/af_can.c:665
 can_rcv+0x120/0x1c0 net/can/af_can.c:696
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579

Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/linux-can/d7e69278-d741-c706-65e1-e87623d9a8e8@huawei.com/T/
Link: https://lore.kernel.org/all/20220208200026.13783-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com
Reported-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -56,6 +56,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/spinlock.h>
 #include <linux/hrtimer.h>
 #include <linux/wait.h>
 #include <linux/uio.h>
@@ -145,6 +146,7 @@ struct isotp_sock {
 	struct tpcon rx, tx;
 	struct list_head notifier;
 	wait_queue_head_t wait;
+	spinlock_t rx_lock; /* protect single thread state machine */
 };
 
 static LIST_HEAD(isotp_notifier_list);
@@ -615,11 +617,17 @@ static void isotp_rcv(struct sk_buff *sk
 
 	n_pci_type = cf->data[ae] & 0xF0;
 
+	/* Make sure the state changes and data structures stay consistent at
+	 * CAN frame reception time. This locking is not needed in real world
+	 * use cases but the inconsistency can be triggered with syzkaller.
+	 */
+	spin_lock(&so->rx_lock);
+
 	if (so->opt.flags & CAN_ISOTP_HALF_DUPLEX) {
 		/* check rx/tx path half duplex expectations */
 		if ((so->tx.state != ISOTP_IDLE && n_pci_type != N_PCI_FC) ||
 		    (so->rx.state != ISOTP_IDLE && n_pci_type == N_PCI_FC))
-			return;
+			goto out_unlock;
 	}
 
 	switch (n_pci_type) {
@@ -668,6 +676,9 @@ static void isotp_rcv(struct sk_buff *sk
 		isotp_rcv_cf(sk, cf, ae, skb);
 		break;
 	}
+
+out_unlock:
+	spin_unlock(&so->rx_lock);
 }
 
 static void isotp_fill_dataframe(struct canfd_frame *cf, struct isotp_sock *so,
@@ -1444,6 +1455,7 @@ static int isotp_init(struct sock *sk)
 	so->txtimer.function = isotp_tx_timer_handler;
 
 	init_waitqueue_head(&so->wait);
+	spin_lock_init(&so->rx_lock);
 
 	spin_lock(&isotp_notifier_lock);
 	list_add_tail(&so->notifier, &isotp_notifier_list);

[PATCH 5.16 011/203] can: isotp: fix error path in isotp_sendmsg() to unlock wait queue

[Greg Kroah-Hartman]

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 8375dfac4f683e1b2c5956d919d36aeedad46699 upstream.

Commit 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.

Fixes: 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()")
Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -887,7 +887,7 @@ static int isotp_sendmsg(struct socket *
 
 	if (!size || size > MAX_MSG_LENGTH) {
 		err = -EINVAL;
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	/* take care of a potential SF_DL ESC offset for TX_DL > 8 */
@@ -897,24 +897,24 @@ static int isotp_sendmsg(struct socket *
 	if ((so->opt.flags & CAN_ISOTP_SF_BROADCAST) &&
 	    (size > so->tx.ll_dl - SF_PCI_SZ4 - ae - off)) {
 		err = -EINVAL;
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	err = memcpy_from_msg(so->tx.buf, msg, size);
 	if (err < 0)
-		goto err_out;
+		goto err_out_drop;
 
 	dev = dev_get_by_index(sock_net(sk), so->ifindex);
 	if (!dev) {
 		err = -ENXIO;
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	skb = sock_alloc_send_skb(sk, so->ll.mtu + sizeof(struct can_skb_priv),
 				  msg->msg_flags & MSG_DONTWAIT, &err);
 	if (!skb) {
 		dev_put(dev);
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	can_skb_reserve(skb);
@@ -976,7 +976,7 @@ static int isotp_sendmsg(struct socket *
 	if (err) {
 		pr_notice_once("can-isotp: %s: can_send_ret %pe\n",
 			       __func__, ERR_PTR(err));
-		goto err_out;
+		goto err_out_drop;
 	}
 
 	if (wait_tx_done) {
@@ -989,6 +989,9 @@ static int isotp_sendmsg(struct socket *
 
 	return size;
 
+err_out_drop:
+	/* drop this PDU and unlock a potential wait queue */
+	old_state = ISOTP_IDLE;
 err_out:
 	so->tx.state = old_state;
 	if (so->tx.state == ISOTP_IDLE)

[PATCH 5.16 012/203] net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs

[Greg Kroah-Hartman]

From: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>

commit fe4f57bf7b585dca58f1496c4e2481ecbae18126 upstream.

It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.

Cc: stable@vger.kernel.org
Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/marvell.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -553,9 +553,9 @@ static int m88e1121_config_aneg_rgmii_de
 	else
 		mscr = 0;
 
-	return phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
-				MII_88E1121_PHY_MSCR_REG,
-				MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
+	return phy_modify_paged_changed(phydev, MII_MARVELL_MSCR_PAGE,
+					MII_88E1121_PHY_MSCR_REG,
+					MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
 }
 
 static int m88e1121_config_aneg(struct phy_device *phydev)
@@ -569,11 +569,13 @@ static int m88e1121_config_aneg(struct p
 			return err;
 	}
 
+	changed = err;
+
 	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
 
-	changed = err;
+	changed |= err;
 
 	err = genphy_config_aneg(phydev);
 	if (err < 0)

[PATCH 5.16 013/203] net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

[Greg Kroah-Hartman]

From: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>

commit aec12836e7196e4d360b2cbf20cf7aa5139ad2ec upstream.

When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.

Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/marvell.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1215,16 +1215,15 @@ static int m88e1118_config_aneg(struct p
 {
 	int err;
 
-	err = genphy_soft_reset(phydev);
+	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
 
-	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
+	err = genphy_config_aneg(phydev);
 	if (err < 0)
 		return err;
 
-	err = genphy_config_aneg(phydev);
-	return 0;
+	return genphy_soft_reset(phydev);
 }
 
 static int m88e1118_config_init(struct phy_device *phydev)

[PATCH 5.16 014/203] NFS: Fix initialisation of nfs_client cl_flags field

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 468d126dab45718feeb728319be20bd869a5eaa7 upstream.

For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().

Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()")
Cc: stable@vger.kernel.org # 4.8.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -177,6 +177,7 @@ struct nfs_client *nfs_alloc_client(cons
 	INIT_LIST_HEAD(&clp->cl_superblocks);
 	clp->cl_rpcclient = ERR_PTR(-EINVAL);
 
+	clp->cl_flags = cl_init->init_flags;
 	clp->cl_proto = cl_init->proto;
 	clp->cl_nconnect = cl_init->nconnect;
 	clp->cl_max_connect = cl_init->max_connect ? cl_init->max_connect : 1;
@@ -427,7 +428,6 @@ struct nfs_client *nfs_get_client(const
 			list_add_tail(&new->cl_share_link,
 					&nn->nfs_client_list);
 			spin_unlock(&nn->nfs_client_lock);
-			new->cl_flags = cl_init->init_flags;
 			return rpc_ops->init_client(new, cl_init);
 		}
 

[PATCH 5.16 015/203] NFSD: Fix NFSv3 SETATTR/CREATEs handling of large file sizes

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit a648fdeb7c0e17177a2280344d015dba3fbe3314 upstream.

iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.

Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().

Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs3xdr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -254,7 +254,7 @@ svcxdr_decode_sattr3(struct svc_rqst *rq
 		if (xdr_stream_decode_u64(xdr, &newsize) < 0)
 			return false;
 		iap->ia_valid |= ATTR_SIZE;
-		iap->ia_size = min_t(u64, newsize, NFS_OFFSET_MAX);
+		iap->ia_size = newsize;
 	}
 	if (xdr_stream_decode_u32(xdr, &set_it) < 0)
 		return false;

[PATCH 5.16 016/203] NFSD: Fix ia_size underflow

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit e6faac3f58c7c4176b66f63def17a34232a17b0e upstream.

iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.

Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/vfs.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -434,6 +434,10 @@ nfsd_setattr(struct svc_rqst *rqstp, str
 			.ia_size	= iap->ia_size,
 		};
 
+		host_err = -EFBIG;
+		if (iap->ia_size < 0)
+			goto out_unlock;
+
 		host_err = notify_change(&init_user_ns, dentry, &size_attr, NULL);
 		if (host_err)
 			goto out_unlock;

[PATCH 5.16 017/203] NFSD: Clamp WRITE offsets

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 6260d9a56ab352b54891ec66ab0eced57d55abc6 upstream.

Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.

Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs3proc.c |    5 +++++
 fs/nfsd/nfs4proc.c |    5 +++--
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -199,6 +199,11 @@ nfsd3_proc_write(struct svc_rqst *rqstp)
 				(unsigned long long) argp->offset,
 				argp->stable? " stable" : "");
 
+	resp->status = nfserr_fbig;
+	if (argp->offset > (u64)OFFSET_MAX ||
+	    argp->offset + argp->len > (u64)OFFSET_MAX)
+		return rpc_success;
+
 	fh_copy(&resp->fh, &argp->fh);
 	resp->committed = argp->stable;
 	nvecs = svc_fill_write_vector(rqstp, &argp->payload);
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1018,8 +1018,9 @@ nfsd4_write(struct svc_rqst *rqstp, stru
 	unsigned long cnt;
 	int nvecs;
 
-	if (write->wr_offset >= OFFSET_MAX)
-		return nfserr_inval;
+	if (write->wr_offset > (u64)OFFSET_MAX ||
+	    write->wr_offset + write->wr_buflen > (u64)OFFSET_MAX)
+		return nfserr_fbig;
 
 	cnt = write->wr_buflen;
 	trace_nfsd_write_start(rqstp, &cstate->current_fh,

[PATCH 5.16 018/203] NFSD: Fix offset type in I/O trace points

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 6a4d333d540041d244b2fca29b8417bfde20af81 upstream.

NFSv3 and NFSv4 use u64 offset values on the wire. Record these values
verbatim without the implicit type case to loff_t.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/trace.h |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/fs/nfsd/trace.h
+++ b/fs/nfsd/trace.h
@@ -320,14 +320,14 @@ TRACE_EVENT(nfsd_export_update,
 DECLARE_EVENT_CLASS(nfsd_io_class,
 	TP_PROTO(struct svc_rqst *rqstp,
 		 struct svc_fh	*fhp,
-		 loff_t		offset,
-		 unsigned long	len),
+		 u64		offset,
+		 u32		len),
 	TP_ARGS(rqstp, fhp, offset, len),
 	TP_STRUCT__entry(
 		__field(u32, xid)
 		__field(u32, fh_hash)
-		__field(loff_t, offset)
-		__field(unsigned long, len)
+		__field(u64, offset)
+		__field(u32, len)
 	),
 	TP_fast_assign(
 		__entry->xid = be32_to_cpu(rqstp->rq_xid);
@@ -335,7 +335,7 @@ DECLARE_EVENT_CLASS(nfsd_io_class,
 		__entry->offset = offset;
 		__entry->len = len;
 	),
-	TP_printk("xid=0x%08x fh_hash=0x%08x offset=%lld len=%lu",
+	TP_printk("xid=0x%08x fh_hash=0x%08x offset=%llu len=%u",
 		  __entry->xid, __entry->fh_hash,
 		  __entry->offset, __entry->len)
 )
@@ -344,8 +344,8 @@ DECLARE_EVENT_CLASS(nfsd_io_class,
 DEFINE_EVENT(nfsd_io_class, nfsd_##name,	\
 	TP_PROTO(struct svc_rqst *rqstp,	\
 		 struct svc_fh	*fhp,		\
-		 loff_t		offset,		\
-		 unsigned long	len),		\
+		 u64		offset,		\
+		 u32		len),		\
 	TP_ARGS(rqstp, fhp, offset, len))
 
 DEFINE_NFSD_IO_EVENT(read_start);

[PATCH 5.16 019/203] NFSD: Fix the behavior of READ near OFFSET_MAX

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 0cb4d23ae08c48f6bf3c29a8e5c4a74b8388b960 upstream.

Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.

The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.

Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.

Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.

Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs3proc.c |    8 ++++++--
 fs/nfsd/nfs4proc.c |    8 ++++++--
 fs/nfsd/nfs4xdr.c  |    8 ++------
 3 files changed, 14 insertions(+), 10 deletions(-)

--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -150,13 +150,17 @@ nfsd3_proc_read(struct svc_rqst *rqstp)
 	unsigned int len;
 	int v;
 
-	argp->count = min_t(u32, argp->count, max_blocksize);
-
 	dprintk("nfsd: READ(3) %s %lu bytes at %Lu\n",
 				SVCFH_fmt(&argp->fh),
 				(unsigned long) argp->count,
 				(unsigned long long) argp->offset);
 
+	argp->count = min_t(u32, argp->count, max_blocksize);
+	if (argp->offset > (u64)OFFSET_MAX)
+		argp->offset = (u64)OFFSET_MAX;
+	if (argp->offset + argp->count > (u64)OFFSET_MAX)
+		argp->count = (u64)OFFSET_MAX - argp->offset;
+
 	v = 0;
 	len = argp->count;
 	resp->pages = rqstp->rq_next_page;
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -782,12 +782,16 @@ nfsd4_read(struct svc_rqst *rqstp, struc
 	__be32 status;
 
 	read->rd_nf = NULL;
-	if (read->rd_offset >= OFFSET_MAX)
-		return nfserr_inval;
 
 	trace_nfsd_read_start(rqstp, &cstate->current_fh,
 			      read->rd_offset, read->rd_length);
 
+	read->rd_length = min_t(u32, read->rd_length, svc_max_payload(rqstp));
+	if (read->rd_offset > (u64)OFFSET_MAX)
+		read->rd_offset = (u64)OFFSET_MAX;
+	if (read->rd_offset + read->rd_length > (u64)OFFSET_MAX)
+		read->rd_length = (u64)OFFSET_MAX - read->rd_offset;
+
 	/*
 	 * If we do a zero copy read, then a client will see read data
 	 * that reflects the state of the file *after* performing the
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -3997,10 +3997,8 @@ nfsd4_encode_read(struct nfsd4_compoundr
 	}
 	xdr_commit_encode(xdr);
 
-	maxcount = svc_max_payload(resp->rqstp);
-	maxcount = min_t(unsigned long, maxcount,
+	maxcount = min_t(unsigned long, read->rd_length,
 			 (xdr->buf->buflen - xdr->buf->len));
-	maxcount = min_t(unsigned long, maxcount, read->rd_length);
 
 	if (file->f_op->splice_read &&
 	    test_bit(RQ_SPLICE_OK, &resp->rqstp->rq_flags))
@@ -4837,10 +4835,8 @@ nfsd4_encode_read_plus(struct nfsd4_comp
 		return nfserr_resource;
 	xdr_commit_encode(xdr);
 
-	maxcount = svc_max_payload(resp->rqstp);
-	maxcount = min_t(unsigned long, maxcount,
+	maxcount = min_t(unsigned long, read->rd_length,
 			 (xdr->buf->buflen - xdr->buf->len));
-	maxcount = min_t(unsigned long, maxcount, read->rd_length);
 	count    = maxcount;
 
 	eof = read->rd_offset >= i_size_read(file_inode(file));

[PATCH 5.16 020/203] NFS: change nfs_access_get_cached to only report the mask

[Greg Kroah-Hartman]

From: NeilBrown <neilb@suse.de>

[ Upstream commit b5e7b59c3480f355910f9d2c6ece5857922a5e54 ]

Currently the nfs_access_get_cached family of functions report a
'struct nfs_access_entry' as the result, with both .mask and .cred set.
However the .cred is never used.  This is probably good and there is no
guarantee that it won't be freed before use.

Change to only report the 'mask' - as this is all that is used or needed.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c           | 20 +++++++++-----------
 fs/nfs/nfs4proc.c      | 18 +++++++++---------
 include/linux/nfs_fs.h |  4 ++--
 3 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 24ce5652d9be8..faf5168880223 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -2695,7 +2695,7 @@ static struct nfs_access_entry *nfs_access_search_rbtree(struct inode *inode, co
 	return NULL;
 }
 
-static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *cred, struct nfs_access_entry *res, bool may_block)
+static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *cred, u32 *mask, bool may_block)
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
 	struct nfs_access_entry *cache;
@@ -2725,8 +2725,7 @@ static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *
 		spin_lock(&inode->i_lock);
 		retry = false;
 	}
-	res->cred = cache->cred;
-	res->mask = cache->mask;
+	*mask = cache->mask;
 	list_move_tail(&cache->lru, &nfsi->access_cache_entry_lru);
 	err = 0;
 out:
@@ -2738,7 +2737,7 @@ static int nfs_access_get_cached_locked(struct inode *inode, const struct cred *
 	return -ENOENT;
 }
 
-static int nfs_access_get_cached_rcu(struct inode *inode, const struct cred *cred, struct nfs_access_entry *res)
+static int nfs_access_get_cached_rcu(struct inode *inode, const struct cred *cred, u32 *mask)
 {
 	/* Only check the most recently returned cache entry,
 	 * but do it without locking.
@@ -2760,22 +2759,21 @@ static int nfs_access_get_cached_rcu(struct inode *inode, const struct cred *cre
 		goto out;
 	if (nfs_check_cache_invalid(inode, NFS_INO_INVALID_ACCESS))
 		goto out;
-	res->cred = cache->cred;
-	res->mask = cache->mask;
+	*mask = cache->mask;
 	err = 0;
 out:
 	rcu_read_unlock();
 	return err;
 }
 
-int nfs_access_get_cached(struct inode *inode, const struct cred *cred, struct
-nfs_access_entry *res, bool may_block)
+int nfs_access_get_cached(struct inode *inode, const struct cred *cred,
+			  u32 *mask, bool may_block)
 {
 	int status;
 
-	status = nfs_access_get_cached_rcu(inode, cred, res);
+	status = nfs_access_get_cached_rcu(inode, cred, mask);
 	if (status != 0)
-		status = nfs_access_get_cached_locked(inode, cred, res,
+		status = nfs_access_get_cached_locked(inode, cred, mask,
 		    may_block);
 
 	return status;
@@ -2896,7 +2894,7 @@ static int nfs_do_access(struct inode *inode, const struct cred *cred, int mask)
 
 	trace_nfs_access_enter(inode);
 
-	status = nfs_access_get_cached(inode, cred, &cache, may_block);
+	status = nfs_access_get_cached(inode, cred, &cache.mask, may_block);
 	if (status == 0)
 		goto out_cached;
 
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index ee3bc79f6ca3a..322ff45ad15ca 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7611,7 +7611,7 @@ static int nfs4_xattr_set_nfs4_user(const struct xattr_handler *handler,
 				    const char *key, const void *buf,
 				    size_t buflen, int flags)
 {
-	struct nfs_access_entry cache;
+	u32 mask;
 	int ret;
 
 	if (!nfs_server_capable(inode, NFS_CAP_XATTR))
@@ -7626,8 +7626,8 @@ static int nfs4_xattr_set_nfs4_user(const struct xattr_handler *handler,
 	 * do a cached access check for the XA* flags to possibly avoid
 	 * doing an RPC and getting EACCES back.
 	 */
-	if (!nfs_access_get_cached(inode, current_cred(), &cache, true)) {
-		if (!(cache.mask & NFS_ACCESS_XAWRITE))
+	if (!nfs_access_get_cached(inode, current_cred(), &mask, true)) {
+		if (!(mask & NFS_ACCESS_XAWRITE))
 			return -EACCES;
 	}
 
@@ -7648,14 +7648,14 @@ static int nfs4_xattr_get_nfs4_user(const struct xattr_handler *handler,
 				    struct dentry *unused, struct inode *inode,
 				    const char *key, void *buf, size_t buflen)
 {
-	struct nfs_access_entry cache;
+	u32 mask;
 	ssize_t ret;
 
 	if (!nfs_server_capable(inode, NFS_CAP_XATTR))
 		return -EOPNOTSUPP;
 
-	if (!nfs_access_get_cached(inode, current_cred(), &cache, true)) {
-		if (!(cache.mask & NFS_ACCESS_XAREAD))
+	if (!nfs_access_get_cached(inode, current_cred(), &mask, true)) {
+		if (!(mask & NFS_ACCESS_XAREAD))
 			return -EACCES;
 	}
 
@@ -7680,13 +7680,13 @@ nfs4_listxattr_nfs4_user(struct inode *inode, char *list, size_t list_len)
 	ssize_t ret, size;
 	char *buf;
 	size_t buflen;
-	struct nfs_access_entry cache;
+	u32 mask;
 
 	if (!nfs_server_capable(inode, NFS_CAP_XATTR))
 		return 0;
 
-	if (!nfs_access_get_cached(inode, current_cred(), &cache, true)) {
-		if (!(cache.mask & NFS_ACCESS_XALIST))
+	if (!nfs_access_get_cached(inode, current_cred(), &mask, true)) {
+		if (!(mask & NFS_ACCESS_XALIST))
 			return 0;
 	}
 
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 05f249f20f55d..f33559acbcc28 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -533,8 +533,8 @@ extern int nfs_instantiate(struct dentry *dentry, struct nfs_fh *fh,
 			struct nfs_fattr *fattr);
 extern int nfs_may_open(struct inode *inode, const struct cred *cred, int openflags);
 extern void nfs_access_zap_cache(struct inode *inode);
-extern int nfs_access_get_cached(struct inode *inode, const struct cred *cred, struct nfs_access_entry *res,
-				 bool may_block);
+extern int nfs_access_get_cached(struct inode *inode, const struct cred *cred,
+				 u32 *mask, bool may_block);
 
 /*
  * linux/fs/nfs/symlink.c
-- 
2.34.1

[PATCH 5.16 021/203] NFSv4 only print the label when its queried

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 2c52c8376db7160a1dd8a681c61c9258405ef143 ]

When the bitmask of the attributes doesn't include the security label,
don't bother printing it. Since the label might not be null terminated,
adjust the printing format accordingly.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4xdr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 69862bf6db001..801119b7a5964 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -4200,10 +4200,11 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap,
 		} else
 			printk(KERN_WARNING "%s: label too long (%u)!\n",
 					__func__, len);
+		if (label && label->label)
+			dprintk("%s: label=%.*s, len=%d, PI=%d, LFS=%d\n",
+				__func__, label->len, (char *)label->label,
+				label->len, label->pi, label->lfs);
 	}
-	if (label && label->label)
-		dprintk("%s: label=%s, len=%d, PI=%d, LFS=%d\n", __func__,
-			(char *)label->label, label->len, label->pi, label->lfs);
 	return status;
 }
 
-- 
2.34.1

[PATCH 5.16 022/203] nfs: nfs4clinet: check the return value of kstrdup()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit fbd2057e5329d3502a27491190237b6be52a1cb6 ]

kstrdup() returns NULL when some internal memory errors happen, it is
better to check the return value of it so to catch the memory error in
time.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4client.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index d8b5a250ca050..47a6cf892c95a 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -1343,8 +1343,11 @@ int nfs4_update_server(struct nfs_server *server, const char *hostname,
 	}
 	nfs_put_client(clp);
 
-	if (server->nfs_client->cl_hostname == NULL)
+	if (server->nfs_client->cl_hostname == NULL) {
 		server->nfs_client->cl_hostname = kstrdup(hostname, GFP_KERNEL);
+		if (server->nfs_client->cl_hostname == NULL)
+			return -ENOMEM;
+	}
 	nfs_server_insert_lists(server);
 
 	return nfs_probe_server(server, NFS_FH(d_inode(server->super->s_root)));
-- 
2.34.1

[PATCH 5.16 023/203] NFSv4.1: Fix uninitialised variable in devicenotify

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit b05bf5c63b326ce1da84ef42498d8e0e292e694c ]

When decode_devicenotify_args() exits with no entries, we need to
ensure that the struct cb_devicenotifyargs is initialised to
{ 0, NULL } in order to avoid problems in
nfs4_callback_devicenotify().

Reported-by: <rtm@csail.mit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/callback.h      |  2 +-
 fs/nfs/callback_proc.c |  2 +-
 fs/nfs/callback_xdr.c  | 18 +++++++++---------
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h
index 6a2033131c068..ccd4f245cae24 100644
--- a/fs/nfs/callback.h
+++ b/fs/nfs/callback.h
@@ -170,7 +170,7 @@ struct cb_devicenotifyitem {
 };
 
 struct cb_devicenotifyargs {
-	int				 ndevs;
+	uint32_t			 ndevs;
 	struct cb_devicenotifyitem	 *devs;
 };
 
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index 09c5b1cb3e075..c343666d9a428 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -358,7 +358,7 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
 				  struct cb_process_state *cps)
 {
 	struct cb_devicenotifyargs *args = argp;
-	int i;
+	uint32_t i;
 	__be32 res = 0;
 	struct nfs_client *clp = cps->clp;
 	struct nfs_server *server = NULL;
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index a67c41ec545fd..f90de8043b0f9 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -258,11 +258,9 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
 				void *argp)
 {
 	struct cb_devicenotifyargs *args = argp;
+	uint32_t tmp, n, i;
 	__be32 *p;
 	__be32 status = 0;
-	u32 tmp;
-	int n, i;
-	args->ndevs = 0;
 
 	/* Num of device notifications */
 	p = xdr_inline_decode(xdr, sizeof(uint32_t));
@@ -271,7 +269,7 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
 		goto out;
 	}
 	n = ntohl(*p++);
-	if (n <= 0)
+	if (n == 0)
 		goto out;
 	if (n > ULONG_MAX / sizeof(*args->devs)) {
 		status = htonl(NFS4ERR_BADXDR);
@@ -330,19 +328,21 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
 			dev->cbd_immediate = 0;
 		}
 
-		args->ndevs++;
-
 		dprintk("%s: type %d layout 0x%x immediate %d\n",
 			__func__, dev->cbd_notify_type, dev->cbd_layout_type,
 			dev->cbd_immediate);
 	}
+	args->ndevs = n;
+	dprintk("%s: ndevs %d\n", __func__, args->ndevs);
+	return 0;
+err:
+	kfree(args->devs);
 out:
+	args->devs = NULL;
+	args->ndevs = 0;
 	dprintk("%s: status %d ndevs %d\n",
 		__func__, ntohl(status), args->ndevs);
 	return status;
-err:
-	kfree(args->devs);
-	goto out;
 }
 
 static __be32 decode_sessionid(struct xdr_stream *xdr,
-- 
2.34.1

[PATCH 5.16 024/203] NFSv4 remove zero number of fs_locations entries error check

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 90e12a3191040bd3854d3e236c35921e4e92a044 ]

Remove the check for the zero length fs_locations reply in the
xdr decoding, and instead check for that in the migration code.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4state.c | 3 +++
 fs/nfs/nfs4xdr.c   | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index f63dfa01001c9..f3265575c28d2 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -2106,6 +2106,9 @@ static int nfs4_try_migration(struct nfs_server *server, const struct cred *cred
 	}
 
 	result = -NFS4ERR_NXIO;
+	if (!locations->nlocations)
+		goto out;
+
 	if (!(locations->fattr.valid & NFS_ATTR_FATTR_V4_LOCATIONS)) {
 		dprintk("<-- %s: No fs_locations data, migration skipped\n",
 			__func__);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 801119b7a5964..71a00e48bd2dd 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -3696,8 +3696,6 @@ static int decode_attr_fs_locations(struct xdr_stream *xdr, uint32_t *bitmap, st
 	if (unlikely(!p))
 		goto out_eio;
 	n = be32_to_cpup(p);
-	if (n <= 0)
-		goto out_eio;
 	for (res->nlocations = 0; res->nlocations < n; res->nlocations++) {
 		u32 m;
 		struct nfs4_fs_location *loc;
-- 
2.34.1

[PATCH 5.16 025/203] NFSv4 store server support for fs_location attribute

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 8a59bb93b7e3cca389af44781a429ac12ac49be6 ]

Define and store if server returns it supports fs_locations attribute
as a capability.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c         | 2 ++
 include/linux/nfs_fs_sb.h | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 322ff45ad15ca..f924d3029d13b 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3874,6 +3874,8 @@ static int _nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *f
 		if (res.attr_bitmask[2] & FATTR4_WORD2_SECURITY_LABEL)
 			server->caps |= NFS_CAP_SECURITY_LABEL;
 #endif
+		if (res.attr_bitmask[0] & FATTR4_WORD0_FS_LOCATIONS)
+			server->caps |= NFS_CAP_FS_LOCATIONS;
 		if (!(res.attr_bitmask[0] & FATTR4_WORD0_FILEID))
 			server->fattr_valid &= ~NFS_ATTR_FATTR_FILEID;
 		if (!(res.attr_bitmask[1] & FATTR4_WORD1_MODE))
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index 2a9acbfe00f0f..9a6e70ccde56e 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -287,5 +287,5 @@ struct nfs_server {
 #define NFS_CAP_COPY_NOTIFY	(1U << 27)
 #define NFS_CAP_XATTR		(1U << 28)
 #define NFS_CAP_READ_PLUS	(1U << 29)
-
+#define NFS_CAP_FS_LOCATIONS	(1U << 30)
 #endif
-- 
2.34.1

[PATCH 5.16 026/203] NFSv4.1 query for fs_location attr on a new file system

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 1976b2b31462151403c9fc110204fcc2a77bdfd1 ]

Query the server for other possible trunkable locations for a given
file system on a 4.1+ mount.

v2:
-- added missing static to nfs4_discover_trunking,
reported by the kernel test robot

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/client.c         |  7 ++++
 fs/nfs/nfs4_fs.h        |  9 ++---
 fs/nfs/nfs4proc.c       | 76 +++++++++++++++++++++++++++++++++++------
 fs/nfs/nfs4state.c      |  3 +-
 include/linux/nfs_xdr.h |  1 +
 5 files changed, 81 insertions(+), 15 deletions(-)

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 2d2f2c091c65a..a1e87419f3a42 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -860,6 +860,13 @@ static int nfs_probe_fsinfo(struct nfs_server *server, struct nfs_fh *mntfh, str
 			server->namelen = pathinfo.max_namelen;
 	}
 
+	if (clp->rpc_ops->discover_trunking != NULL &&
+			(server->caps & NFS_CAP_FS_LOCATIONS)) {
+		error = clp->rpc_ops->discover_trunking(server, mntfh);
+		if (error < 0)
+			return error;
+	}
+
 	return 0;
 }
 
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index ed5eaca6801ee..2402a3d8ba997 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -260,8 +260,8 @@ struct nfs4_state_maintenance_ops {
 };
 
 struct nfs4_mig_recovery_ops {
-	int (*get_locations)(struct inode *, struct nfs4_fs_locations *,
-		struct page *, const struct cred *);
+	int (*get_locations)(struct nfs_server *, struct nfs_fh *,
+		struct nfs4_fs_locations *, struct page *, const struct cred *);
 	int (*fsid_present)(struct inode *, const struct cred *);
 };
 
@@ -302,8 +302,9 @@ extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait);
 extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle);
 extern int nfs4_proc_fs_locations(struct rpc_clnt *, struct inode *, const struct qstr *,
 				  struct nfs4_fs_locations *, struct page *);
-extern int nfs4_proc_get_locations(struct inode *, struct nfs4_fs_locations *,
-		struct page *page, const struct cred *);
+extern int nfs4_proc_get_locations(struct nfs_server *, struct nfs_fh *,
+				   struct nfs4_fs_locations *,
+				   struct page *page, const struct cred *);
 extern int nfs4_proc_fsid_present(struct inode *, const struct cred *);
 extern struct rpc_clnt *nfs4_proc_lookup_mountpoint(struct inode *,
 						    struct dentry *,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index f924d3029d13b..9a94e758212c8 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3934,6 +3934,60 @@ int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle)
 	return err;
 }
 
+static int _nfs4_discover_trunking(struct nfs_server *server,
+				   struct nfs_fh *fhandle)
+{
+	struct nfs4_fs_locations *locations = NULL;
+	struct page *page;
+	const struct cred *cred;
+	struct nfs_client *clp = server->nfs_client;
+	const struct nfs4_state_maintenance_ops *ops =
+		clp->cl_mvops->state_renewal_ops;
+	int status = -ENOMEM;
+
+	cred = ops->get_state_renewal_cred(clp);
+	if (cred == NULL) {
+		cred = nfs4_get_clid_cred(clp);
+		if (cred == NULL)
+			return -ENOKEY;
+	}
+
+	page = alloc_page(GFP_KERNEL);
+	locations = kmalloc(sizeof(struct nfs4_fs_locations), GFP_KERNEL);
+	if (page == NULL || locations == NULL)
+		goto out;
+
+	status = nfs4_proc_get_locations(server, fhandle, locations, page,
+					 cred);
+	if (status)
+		goto out;
+out:
+	if (page)
+		__free_page(page);
+	kfree(locations);
+	return status;
+}
+
+static int nfs4_discover_trunking(struct nfs_server *server,
+				  struct nfs_fh *fhandle)
+{
+	struct nfs4_exception exception = {
+		.interruptible = true,
+	};
+	struct nfs_client *clp = server->nfs_client;
+	int err = 0;
+
+	if (!nfs4_has_session(clp))
+		goto out;
+	do {
+		err = nfs4_handle_exception(server,
+				_nfs4_discover_trunking(server, fhandle),
+				&exception);
+	} while (exception.retry);
+out:
+	return err;
+}
+
 static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
 		struct nfs_fsinfo *info)
 {
@@ -7820,18 +7874,18 @@ int nfs4_proc_fs_locations(struct rpc_clnt *client, struct inode *dir,
  * appended to this compound to identify the client ID which is
  * performing recovery.
  */
-static int _nfs40_proc_get_locations(struct inode *inode,
+static int _nfs40_proc_get_locations(struct nfs_server *server,
+				     struct nfs_fh *fhandle,
 				     struct nfs4_fs_locations *locations,
 				     struct page *page, const struct cred *cred)
 {
-	struct nfs_server *server = NFS_SERVER(inode);
 	struct rpc_clnt *clnt = server->client;
 	u32 bitmask[2] = {
 		[0] = FATTR4_WORD0_FSID | FATTR4_WORD0_FS_LOCATIONS,
 	};
 	struct nfs4_fs_locations_arg args = {
 		.clientid	= server->nfs_client->cl_clientid,
-		.fh		= NFS_FH(inode),
+		.fh		= fhandle,
 		.page		= page,
 		.bitmask	= bitmask,
 		.migration	= 1,		/* skip LOOKUP */
@@ -7877,17 +7931,17 @@ static int _nfs40_proc_get_locations(struct inode *inode,
  * When the client supports GETATTR(fs_locations_info), it can
  * be plumbed in here.
  */
-static int _nfs41_proc_get_locations(struct inode *inode,
+static int _nfs41_proc_get_locations(struct nfs_server *server,
+				     struct nfs_fh *fhandle,
 				     struct nfs4_fs_locations *locations,
 				     struct page *page, const struct cred *cred)
 {
-	struct nfs_server *server = NFS_SERVER(inode);
 	struct rpc_clnt *clnt = server->client;
 	u32 bitmask[2] = {
 		[0] = FATTR4_WORD0_FSID | FATTR4_WORD0_FS_LOCATIONS,
 	};
 	struct nfs4_fs_locations_arg args = {
-		.fh		= NFS_FH(inode),
+		.fh		= fhandle,
 		.page		= page,
 		.bitmask	= bitmask,
 		.migration	= 1,		/* skip LOOKUP */
@@ -7936,11 +7990,11 @@ static int _nfs41_proc_get_locations(struct inode *inode,
  * -NFS4ERR_LEASE_MOVED is returned if the server still has leases
  * from this client that require migration recovery.
  */
-int nfs4_proc_get_locations(struct inode *inode,
+int nfs4_proc_get_locations(struct nfs_server *server,
+			    struct nfs_fh *fhandle,
 			    struct nfs4_fs_locations *locations,
 			    struct page *page, const struct cred *cred)
 {
-	struct nfs_server *server = NFS_SERVER(inode);
 	struct nfs_client *clp = server->nfs_client;
 	const struct nfs4_mig_recovery_ops *ops =
 					clp->cl_mvops->mig_recovery_ops;
@@ -7953,10 +8007,11 @@ int nfs4_proc_get_locations(struct inode *inode,
 		(unsigned long long)server->fsid.major,
 		(unsigned long long)server->fsid.minor,
 		clp->cl_hostname);
-	nfs_display_fhandle(NFS_FH(inode), __func__);
+	nfs_display_fhandle(fhandle, __func__);
 
 	do {
-		status = ops->get_locations(inode, locations, page, cred);
+		status = ops->get_locations(server, fhandle, locations, page,
+					    cred);
 		if (status != -NFS4ERR_DELAY)
 			break;
 		nfs4_handle_exception(server, status, &exception);
@@ -10425,6 +10480,7 @@ const struct nfs_rpc_ops nfs_v4_clientops = {
 	.free_client	= nfs4_free_client,
 	.create_server	= nfs4_create_server,
 	.clone_server	= nfs_clone_server,
+	.discover_trunking = nfs4_discover_trunking,
 };
 
 static const struct xattr_handler nfs4_xattr_nfs4_acl_handler = {
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index f3265575c28d2..499bef9fe1186 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -2098,7 +2098,8 @@ static int nfs4_try_migration(struct nfs_server *server, const struct cred *cred
 	}
 
 	inode = d_inode(server->super->s_root);
-	result = nfs4_proc_get_locations(inode, locations, page, cred);
+	result = nfs4_proc_get_locations(server, NFS_FH(inode), locations,
+					 page, cred);
 	if (result) {
 		dprintk("<-- %s: failed to retrieve fs_locations: %d\n",
 			__func__, result);
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 967a0098f0a97..695fa84611b66 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1795,6 +1795,7 @@ struct nfs_rpc_ops {
 	struct nfs_server *(*create_server)(struct fs_context *);
 	struct nfs_server *(*clone_server)(struct nfs_server *, struct nfs_fh *,
 					   struct nfs_fattr *, rpc_authflavor_t);
+	int	(*discover_trunking)(struct nfs_server *, struct nfs_fh *);
 };
 
 /*
-- 
2.34.1

[PATCH 5.16 027/203] NFSv4 expose nfs_parse_server_name function

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit f5b27cc6761e27ee6387a24df1a99ca77b360fea ]

Make nfs_parse_server_name available outside of nfs4namespace.c.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4_fs.h       | 3 ++-
 fs/nfs/nfs4namespace.c | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 2402a3d8ba997..734ac09becf73 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -280,7 +280,8 @@ struct rpc_clnt *nfs4_negotiate_security(struct rpc_clnt *, struct inode *,
 int nfs4_submount(struct fs_context *, struct nfs_server *);
 int nfs4_replace_transport(struct nfs_server *server,
 				const struct nfs4_fs_locations *locations);
-
+size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
+			     size_t salen, struct net *net);
 /* nfs4proc.c */
 extern int nfs4_handle_exception(struct nfs_server *, int, struct nfs4_exception *);
 extern int nfs4_async_handle_error(struct rpc_task *task,
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 873342308dc0d..f1ed4f60a7f33 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -164,8 +164,8 @@ static int nfs4_validate_fspath(struct dentry *dentry,
 	return 0;
 }
 
-static size_t nfs_parse_server_name(char *string, size_t len,
-		struct sockaddr *sa, size_t salen, struct net *net)
+size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
+			     size_t salen, struct net *net)
 {
 	ssize_t ret;
 
-- 
2.34.1

[PATCH 5.16 028/203] NFSv4 handle port presence in fs_location server string

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit a8d54baba7c65db2d3278873def61f8d3753d766 ]

An fs_location attribute returns a string that can be ipv4, ipv6,
or DNS name. An ip location can have a port appended to it and if
no port is present a default port needs to be set. If rpc_pton()
fails to parse, try calling rpc_uaddr2socaddr() that can convert
an universal address.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4_fs.h       |  2 +-
 fs/nfs/nfs4namespace.c | 17 +++++++++++------
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 734ac09becf73..85c5d08dfa9cc 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -281,7 +281,7 @@ int nfs4_submount(struct fs_context *, struct nfs_server *);
 int nfs4_replace_transport(struct nfs_server *server,
 				const struct nfs4_fs_locations *locations);
 size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
-			     size_t salen, struct net *net);
+			     size_t salen, struct net *net, int port);
 /* nfs4proc.c */
 extern int nfs4_handle_exception(struct nfs_server *, int, struct nfs4_exception *);
 extern int nfs4_async_handle_error(struct rpc_task *task,
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index f1ed4f60a7f33..3680c8da510c9 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -165,15 +165,20 @@ static int nfs4_validate_fspath(struct dentry *dentry,
 }
 
 size_t nfs_parse_server_name(char *string, size_t len, struct sockaddr *sa,
-			     size_t salen, struct net *net)
+			     size_t salen, struct net *net, int port)
 {
 	ssize_t ret;
 
 	ret = rpc_pton(net, string, len, sa, salen);
 	if (ret == 0) {
-		ret = nfs_dns_resolve_name(net, string, len, sa, salen);
-		if (ret < 0)
-			ret = 0;
+		ret = rpc_uaddr2sockaddr(net, string, len, sa, salen);
+		if (ret == 0) {
+			ret = nfs_dns_resolve_name(net, string, len, sa, salen);
+			if (ret < 0)
+				ret = 0;
+		}
+	} else if (port) {
+		rpc_set_port(sa, port);
 	}
 	return ret;
 }
@@ -328,7 +333,7 @@ static int try_location(struct fs_context *fc,
 			nfs_parse_server_name(buf->data, buf->len,
 					      &ctx->nfs_server.address,
 					      sizeof(ctx->nfs_server._address),
-					      fc->net_ns);
+					      fc->net_ns, 0);
 		if (ctx->nfs_server.addrlen == 0)
 			continue;
 
@@ -496,7 +501,7 @@ static int nfs4_try_replacing_one_location(struct nfs_server *server,
 			continue;
 
 		salen = nfs_parse_server_name(buf->data, buf->len,
-						sap, addr_bufsize, net);
+						sap, addr_bufsize, net, 0);
 		if (salen == 0)
 			continue;
 		rpc_set_port(sap, NFS_PORT);
-- 
2.34.1

[PATCH 5.16 029/203] SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit b8a09619a56334414cbd7f935a0796240d0cc07e ]

If the supplied argument doesn't specify the transport type, use the
type of the existing rpc clnt and its existing transport.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/clnt.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index a312ea2bc4405..c83fe618767c4 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -2900,7 +2900,7 @@ int rpc_clnt_add_xprt(struct rpc_clnt *clnt,
 	unsigned long connect_timeout;
 	unsigned long reconnect_timeout;
 	unsigned char resvport, reuseport;
-	int ret = 0;
+	int ret = 0, ident;
 
 	rcu_read_lock();
 	xps = xprt_switch_get(rcu_dereference(clnt->cl_xpi.xpi_xpswitch));
@@ -2914,8 +2914,11 @@ int rpc_clnt_add_xprt(struct rpc_clnt *clnt,
 	reuseport = xprt->reuseport;
 	connect_timeout = xprt->connect_timeout;
 	reconnect_timeout = xprt->max_reconnect_timeout;
+	ident = xprt->xprt_class->ident;
 	rcu_read_unlock();
 
+	if (!xprtargs->ident)
+		xprtargs->ident = ident;
 	xprt = xprt_create_transport(xprtargs);
 	if (IS_ERR(xprt)) {
 		ret = PTR_ERR(xprt);
-- 
2.34.1

[PATCH 5.16 030/203] net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change

[Greg Kroah-Hartman]

From: Xiyu Yang <xiyuyang19@fudan.edu.cn>

[ Upstream commit 776d794f28c95051bc70405a7b1fa40115658a18 ]

The refcount leak issues take place in an error handling path. When the
3rd argument buf doesn't match with "offline", "online" or "remove", the
function simply returns -EINVAL and forgets to decrease the reference
count of a rpc_xprt object and a rpc_xprt_switch object increased by
rpc_sysfs_xprt_kobj_get_xprt() and
rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of
both unused objects.

Fix this issue by jumping to the error handling path labelled with
out_put when buf matches none of "offline", "online" or "remove".

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/sysfs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/sysfs.c b/net/sunrpc/sysfs.c
index 2766dd21935b8..77e7d011c1ab1 100644
--- a/net/sunrpc/sysfs.c
+++ b/net/sunrpc/sysfs.c
@@ -295,8 +295,10 @@ static ssize_t rpc_sysfs_xprt_state_change(struct kobject *kobj,
 		online = 1;
 	else if (!strncmp(buf, "remove", 6))
 		remove = 1;
-	else
-		return -EINVAL;
+	else {
+		count = -EINVAL;
+		goto out_put;
+	}
 
 	if (wait_on_bit_lock(&xprt->state, XPRT_LOCKED, TASK_KILLABLE)) {
 		count = -EINTR;
-- 
2.34.1

[PATCH 5.16 031/203] sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()

[Greg Kroah-Hartman]

From: Anna Schumaker <Anna.Schumaker@Netapp.com>

[ Upstream commit 1a48db3fef499f615b56093947ec4b0d3d8e3021 ]

We need to use test_and_set_bit() when changing xprt state flags to
avoid potentially getting xps->xps_nactive out of sync.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/sysfs.c | 35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/net/sunrpc/sysfs.c b/net/sunrpc/sysfs.c
index 77e7d011c1ab1..8f309bcdf84fe 100644
--- a/net/sunrpc/sysfs.c
+++ b/net/sunrpc/sysfs.c
@@ -309,25 +309,28 @@ static ssize_t rpc_sysfs_xprt_state_change(struct kobject *kobj,
 		goto release_tasks;
 	}
 	if (offline) {
-		set_bit(XPRT_OFFLINE, &xprt->state);
-		spin_lock(&xps->xps_lock);
-		xps->xps_nactive--;
-		spin_unlock(&xps->xps_lock);
+		if (!test_and_set_bit(XPRT_OFFLINE, &xprt->state)) {
+			spin_lock(&xps->xps_lock);
+			xps->xps_nactive--;
+			spin_unlock(&xps->xps_lock);
+		}
 	} else if (online) {
-		clear_bit(XPRT_OFFLINE, &xprt->state);
-		spin_lock(&xps->xps_lock);
-		xps->xps_nactive++;
-		spin_unlock(&xps->xps_lock);
+		if (test_and_clear_bit(XPRT_OFFLINE, &xprt->state)) {
+			spin_lock(&xps->xps_lock);
+			xps->xps_nactive++;
+			spin_unlock(&xps->xps_lock);
+		}
 	} else if (remove) {
 		if (test_bit(XPRT_OFFLINE, &xprt->state)) {
-			set_bit(XPRT_REMOVE, &xprt->state);
-			xprt_force_disconnect(xprt);
-			if (test_bit(XPRT_CONNECTED, &xprt->state)) {
-				if (!xprt->sending.qlen &&
-				    !xprt->pending.qlen &&
-				    !xprt->backlog.qlen &&
-				    !atomic_long_read(&xprt->queuelen))
-					rpc_xprt_switch_remove_xprt(xps, xprt);
+			if (!test_and_set_bit(XPRT_REMOVE, &xprt->state)) {
+				xprt_force_disconnect(xprt);
+				if (test_bit(XPRT_CONNECTED, &xprt->state)) {
+					if (!xprt->sending.qlen &&
+					    !xprt->pending.qlen &&
+					    !xprt->backlog.qlen &&
+					    !atomic_long_read(&xprt->queuelen))
+						rpc_xprt_switch_remove_xprt(xps, xprt);
+				}
 			}
 		} else {
 			count = -EINVAL;
-- 
2.34.1

[PATCH 5.16 032/203] irqchip/realtek-rtl: Service all pending interrupts

[Greg Kroah-Hartman]

From: Sander Vanheule <sander@svanheule.net>

[ Upstream commit 960dd884ddf5621ae6284cd3a42724500a97ae4c ]

Instead of only servicing the lowest pending interrupt line, make sure
all pending SoC interrupts are serviced before exiting the chained
handler. This adds a small overhead if only one interrupt is pending,
but should prevent rapid re-triggering of the handler.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5082ad3cb8b4eedf55075561b93eff6570299fe1.1641739718.git.sander@svanheule.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-realtek-rtl.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
index 568614edd88f4..50a56820c99bc 100644
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -76,16 +76,20 @@ static void realtek_irq_dispatch(struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct irq_domain *domain;
-	unsigned int pending;
+	unsigned long pending;
+	unsigned int soc_int;
 
 	chained_irq_enter(chip, desc);
 	pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR));
+
 	if (unlikely(!pending)) {
 		spurious_interrupt();
 		goto out;
 	}
+
 	domain = irq_desc_get_handler_data(desc);
-	generic_handle_domain_irq(domain, __ffs(pending));
+	for_each_set_bit(soc_int, &pending, 32)
+		generic_handle_domain_irq(domain, soc_int);
 
 out:
 	chained_irq_exit(chip, desc);
-- 
2.34.1

[PATCH 5.16 033/203] perf/x86/rapl: fix AMD event handling

[Greg Kroah-Hartman]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit 0036fb00a756a2f6e360d44e2e3d2200a8afbc9b ]

The RAPL events exposed under /sys/devices/power/events should only reflect
what the underlying hardware actually support. This is how it works on Intel
RAPL and Intel core/uncore PMUs in general.
But on AMD, this was not the case. All possible RAPL events were advertised.

This is what it showed on an AMD Fam17h:
$ ls /sys/devices/power/events/
energy-cores        energy-gpu          energy-pkg          energy-psys
energy-ram          energy-cores.scale  energy-gpu.scale    energy-pkg.scale
energy-psys.scale   energy-ram.scale    energy-cores.unit   energy-gpu.unit
energy-pkg.unit     energy-psys.unit    energy-ram.unit

Yet, on AMD Fam17h, only energy-pkg is supported.

This patch fixes the problem. Given the way perf_msr_probe() works, the
amd_rapl_msrs[] table has to have all entries filled out and in particular
the group field, otherwise perf_msr_probe() defaults to making the event
visible.

With the patch applied, the kernel now only shows was is actually supported:

$ ls /sys/devices/power/events/
energy-pkg  energy-pkg.scale  energy-pkg.unit

The patch also uses the RAPL_MSR_MASK because only the 32-bits LSB of the
RAPL counters are relevant when reading power consumption.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220105185659.643355-1-eranian@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/rapl.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/x86/events/rapl.c b/arch/x86/events/rapl.c
index 85feafacc445d..77e3a47af5ad5 100644
--- a/arch/x86/events/rapl.c
+++ b/arch/x86/events/rapl.c
@@ -536,11 +536,14 @@ static struct perf_msr intel_rapl_spr_msrs[] = {
  * - perf_msr_probe(PERF_RAPL_MAX)
  * - want to use same event codes across both architectures
  */
-static struct perf_msr amd_rapl_msrs[PERF_RAPL_MAX] = {
-	[PERF_RAPL_PKG]  = { MSR_AMD_PKG_ENERGY_STATUS,  &rapl_events_pkg_group,   test_msr },
+static struct perf_msr amd_rapl_msrs[] = {
+	[PERF_RAPL_PP0]  = { 0, &rapl_events_cores_group, 0, false, 0 },
+	[PERF_RAPL_PKG]  = { MSR_AMD_PKG_ENERGY_STATUS,  &rapl_events_pkg_group,   test_msr, false, RAPL_MSR_MASK },
+	[PERF_RAPL_RAM]  = { 0, &rapl_events_ram_group,   0, false, 0 },
+	[PERF_RAPL_PP1]  = { 0, &rapl_events_gpu_group,   0, false, 0 },
+	[PERF_RAPL_PSYS] = { 0, &rapl_events_psys_group,  0, false, 0 },
 };
 
-
 static int rapl_cpu_offline(unsigned int cpu)
 {
 	struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
-- 
2.34.1

[PATCH 5.16 034/203] x86/perf: Avoid warning for Arch LBR without XSAVE

[Greg Kroah-Hartman]

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit 8c16dc047b5dd8f7b3bf4584fa75733ea0dde7dc ]

Some hypervisors support Arch LBR, but without the LBR XSAVE support.
The current Arch LBR init code prints a warning when the xsave size (0) is
unexpected. Avoid printing the warning for the "no LBR XSAVE" case.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211215204029.150686-1-ak@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/lbr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 8043213b75a52..fa947c4fbd1f8 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -1726,6 +1726,9 @@ static bool is_arch_lbr_xsave_available(void)
 	 * Check the LBR state with the corresponding software structure.
 	 * Disable LBR XSAVES support if the size doesn't match.
 	 */
+	if (xfeature_size(XFEATURE_LBR) == 0)
+		return false;
+
 	if (WARN_ON(xfeature_size(XFEATURE_LBR) != get_lbr_state_size()))
 		return false;
 
-- 
2.34.1

[PATCH 5.16 035/203] sched: Avoid double preemption in __cond_resched_*lock*()

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 7e406d1ff39b8ee574036418a5043c86723170cf ]

For PREEMPT/DYNAMIC_PREEMPT the *_unlock() will already trigger a
preemption, no point in then calling preempt_schedule_common()
*again*.

Use _cond_resched() instead, since this is a NOP for the preemptible
configs while it provide a preemption point for the others.

Reported-by: xuhaifeng <xuhaifeng@oppo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YcGnvDEYBwOiV0cR@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 77563109c0ea0..d24823b3c3f9f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -8176,9 +8176,7 @@ int __cond_resched_lock(spinlock_t *lock)
 
 	if (spin_needbreak(lock) || resched) {
 		spin_unlock(lock);
-		if (resched)
-			preempt_schedule_common();
-		else
+		if (!_cond_resched())
 			cpu_relax();
 		ret = 1;
 		spin_lock(lock);
@@ -8196,9 +8194,7 @@ int __cond_resched_rwlock_read(rwlock_t *lock)
 
 	if (rwlock_needbreak(lock) || resched) {
 		read_unlock(lock);
-		if (resched)
-			preempt_schedule_common();
-		else
+		if (!_cond_resched())
 			cpu_relax();
 		ret = 1;
 		read_lock(lock);
@@ -8216,9 +8212,7 @@ int __cond_resched_rwlock_write(rwlock_t *lock)
 
 	if (rwlock_needbreak(lock) || resched) {
 		write_unlock(lock);
-		if (resched)
-			preempt_schedule_common();
-		else
+		if (!_cond_resched())
 			cpu_relax();
 		ret = 1;
 		write_lock(lock);
-- 
2.34.1

[PATCH 5.16 036/203] drm/vc4: Fix deadlock on DSI device attach error

[Greg Kroah-Hartman]

From: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>

[ Upstream commit 0a3d12ab5097b1d045e693412e6b366b7e82031b ]

DSI device attach to DSI host will be done with host device's lock
held.

Un-registering host in "device attach" error path (ex: probe retry)
will result in deadlock with below call trace and non operational
DSI display.

Startup Call trace:
[   35.043036]  rt_mutex_slowlock.constprop.21+0x184/0x1b8
[   35.043048]  mutex_lock_nested+0x7c/0xc8
[   35.043060]  device_del+0x4c/0x3e8
[   35.043075]  device_unregister+0x20/0x40
[   35.043082]  mipi_dsi_remove_device_fn+0x18/0x28
[   35.043093]  device_for_each_child+0x68/0xb0
[   35.043105]  mipi_dsi_host_unregister+0x40/0x90
[   35.043115]  vc4_dsi_host_attach+0xf0/0x120 [vc4]
[   35.043199]  mipi_dsi_attach+0x30/0x48
[   35.043209]  tc358762_probe+0x128/0x164 [tc358762]
[   35.043225]  mipi_dsi_drv_probe+0x28/0x38
[   35.043234]  really_probe+0xc0/0x318
[   35.043244]  __driver_probe_device+0x80/0xe8
[   35.043254]  driver_probe_device+0xb8/0x118
[   35.043263]  __device_attach_driver+0x98/0xe8
[   35.043273]  bus_for_each_drv+0x84/0xd8
[   35.043281]  __device_attach+0xf0/0x150
[   35.043290]  device_initial_probe+0x1c/0x28
[   35.043300]  bus_probe_device+0xa4/0xb0
[   35.043308]  deferred_probe_work_func+0xa0/0xe0
[   35.043318]  process_one_work+0x254/0x700
[   35.043330]  worker_thread+0x4c/0x448
[   35.043339]  kthread+0x19c/0x1a8
[   35.043348]  ret_from_fork+0x10/0x20

Shutdown Call trace:
[  365.565417] Call trace:
[  365.565423]  __switch_to+0x148/0x200
[  365.565452]  __schedule+0x340/0x9c8
[  365.565467]  schedule+0x48/0x110
[  365.565479]  schedule_timeout+0x3b0/0x448
[  365.565496]  wait_for_completion+0xac/0x138
[  365.565509]  __flush_work+0x218/0x4e0
[  365.565523]  flush_work+0x1c/0x28
[  365.565536]  wait_for_device_probe+0x68/0x158
[  365.565550]  device_shutdown+0x24/0x348
[  365.565561]  kernel_restart_prepare+0x40/0x50
[  365.565578]  kernel_restart+0x20/0x70
[  365.565591]  __do_sys_reboot+0x10c/0x220
[  365.565605]  __arm64_sys_reboot+0x2c/0x38
[  365.565619]  invoke_syscall+0x4c/0x110
[  365.565634]  el0_svc_common.constprop.3+0xfc/0x120
[  365.565648]  do_el0_svc+0x2c/0x90
[  365.565661]  el0_svc+0x4c/0xf0
[  365.565671]  el0t_64_sync_handler+0x90/0xb8
[  365.565682]  el0t_64_sync+0x180/0x184

Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118005127.29015-1-treasure4paddy@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index a229da58962a2..9300d3354c512 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -1262,7 +1262,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
 	struct vc4_dsi *dsi = host_to_dsi(host);
-	int ret;
 
 	dsi->lanes = device->lanes;
 	dsi->channel = device->channel;
@@ -1297,18 +1296,15 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
 		return 0;
 	}
 
-	ret = component_add(&dsi->pdev->dev, &vc4_dsi_ops);
-	if (ret) {
-		mipi_dsi_host_unregister(&dsi->dsi_host);
-		return ret;
-	}
-
-	return 0;
+	return component_add(&dsi->pdev->dev, &vc4_dsi_ops);
 }
 
 static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
 			       struct mipi_dsi_device *device)
 {
+	struct vc4_dsi *dsi = host_to_dsi(host);
+
+	component_del(&dsi->pdev->dev, &vc4_dsi_ops);
 	return 0;
 }
 
@@ -1686,9 +1682,7 @@ static int vc4_dsi_dev_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct vc4_dsi *dsi = dev_get_drvdata(dev);
 
-	component_del(&pdev->dev, &vc4_dsi_ops);
 	mipi_dsi_host_unregister(&dsi->dsi_host);
-
 	return 0;
 }
 
-- 
2.34.1

[PATCH 5.16 037/203] drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer

[Greg Kroah-Hartman]

From: Raymond Jay Golo <rjgolo@gmail.com>

[ Upstream commit d3cbc6e323c9299d10c8d2e4127c77c7d05d07b1 ]

The 1Netbook OneXPlayer uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Signed-off-by: Raymond Jay Golo <rjgolo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113000619.90988-1-rjgolo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 042bb80383c93..b910978d3e480 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -115,6 +115,12 @@ static const struct drm_dmi_panel_orientation_data lcd1280x1920_rightside_up = {
 	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
+static const struct drm_dmi_panel_orientation_data lcd1600x2560_leftside_up = {
+	.width = 1600,
+	.height = 2560,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+};
+
 static const struct dmi_system_id orientation_data[] = {
 	{	/* Acer One 10 (S1003) */
 		.matches = {
@@ -275,6 +281,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Default string"),
 		},
 		.driver_data = (void *)&onegx1_pro,
+	}, {	/* OneXPlayer */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ONE-NETBOOK TECHNOLOGY CO., LTD."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ONE XPLAYER"),
+		},
+		.driver_data = (void *)&lcd1600x2560_leftside_up,
 	}, {	/* Samsung GalaxyBook 10.6 */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-- 
2.34.1

[PATCH 5.16 038/203] net: sched: Clarify error message when qdisc kind is unknown

[Greg Kroah-Hartman]

From: Victor Nogueira <victor@mojatatu.com>

[ Upstream commit 973bf8fdd12f0e70ea351c018e68edd377a836d1 ]

When adding a tc rule with a qdisc kind that is not supported or not
compiled into the kernel, the kernel emits the following error: "Error:
Specified qdisc not found.". Found via tdc testing when ETS qdisc was not
compiled in and it was not obvious right away what the message meant
without looking at the kernel code.

Change the error message to be more explicit and say the qdisc kind is
unknown.

Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 910a36ed56343..e4a7ce5c79f4f 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1204,7 +1204,7 @@ static struct Qdisc *qdisc_create(struct net_device *dev,
 
 	err = -ENOENT;
 	if (!ops) {
-		NL_SET_ERR_MSG(extack, "Specified qdisc not found");
+		NL_SET_ERR_MSG(extack, "Specified qdisc kind is unknown");
 		goto err_out;
 	}
 
-- 
2.34.1

[PATCH 5.16 039/203] powerpc/fixmap: Fix VM debug warning on unmap

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit aec982603aa8cc0a21143681feb5f60ecc69d718 ]

Unmapping a fixmap entry is done by calling __set_fixmap()
with FIXMAP_PAGE_CLEAR as flags.

Today, powerpc __set_fixmap() calls map_kernel_page().

map_kernel_page() is not happy when called a second time
for the same page.

	WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8
	CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682
	NIP:  c0017cd4 LR: c00187f0 CTR: 00000010
	REGS: e1011d50 TRAP: 0700   Not tainted  (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty)
	MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 42000208  XER: 00000000

	GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c
	GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000
	GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
	GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000
	NIP [c0017cd4] set_pte_at+0xc/0x1e8
	LR [c00187f0] map_kernel_page+0x9c/0x100
	Call Trace:
	[e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable)
	[e1011e30] [c0165fec] __set_fixmap+0x30/0x44
	[e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170
	[e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0
	[e1011e90] [c0c03634] do_one_initcall+0x80/0x178
	[e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250
	[e1011f20] [c0007e34] kernel_init+0x24/0x140
	[e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64
	Instruction dump:
	7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010
	4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030

Implement unmap_kernel_page() which clears an existing pte.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/book3s/32/pgtable.h | 1 +
 arch/powerpc/include/asm/book3s/64/pgtable.h | 2 ++
 arch/powerpc/include/asm/fixmap.h            | 6 ++++--
 arch/powerpc/include/asm/nohash/32/pgtable.h | 1 +
 arch/powerpc/include/asm/nohash/64/pgtable.h | 1 +
 arch/powerpc/mm/pgtable.c                    | 9 +++++++++
 6 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 609c80f671943..f8b94f78403f1 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -178,6 +178,7 @@ static inline bool pte_user(pte_t pte)
 #ifndef __ASSEMBLY__
 
 int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
+void unmap_kernel_page(unsigned long va);
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 33e073d6b0c41..875730d5af408 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1082,6 +1082,8 @@ static inline int map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t p
 	return hash__map_kernel_page(ea, pa, prot);
 }
 
+void unmap_kernel_page(unsigned long va);
+
 static inline int __meminit vmemmap_create_mapping(unsigned long start,
 						   unsigned long page_size,
 						   unsigned long phys)
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 947b5b9c44241..a832aeafe5601 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -111,8 +111,10 @@ static inline void __set_fixmap(enum fixed_addresses idx,
 		BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
 	else if (WARN_ON(idx >= __end_of_fixed_addresses))
 		return;
-
-	map_kernel_page(__fix_to_virt(idx), phys, flags);
+	if (pgprot_val(flags))
+		map_kernel_page(__fix_to_virt(idx), phys, flags);
+	else
+		unmap_kernel_page(__fix_to_virt(idx));
 }
 
 #define __early_set_fixmap	__set_fixmap
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index b67742e2a9b22..d959c2a73fbf4 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -64,6 +64,7 @@ extern int icache_44x_need_flush;
 #ifndef __ASSEMBLY__
 
 int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
+void unmap_kernel_page(unsigned long va);
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 9d2905a474103..2225991c69b55 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -308,6 +308,7 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
 #define __swp_entry_to_pte(x)		__pte((x).val)
 
 int map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot);
+void unmap_kernel_page(unsigned long va);
 extern int __meminit vmemmap_create_mapping(unsigned long start,
 					    unsigned long page_size,
 					    unsigned long phys);
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ce94823831442..b7385e637e3e3 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -203,6 +203,15 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 	__set_pte_at(mm, addr, ptep, pte, 0);
 }
 
+void unmap_kernel_page(unsigned long va)
+{
+	pmd_t *pmdp = pmd_off_k(va);
+	pte_t *ptep = pte_offset_kernel(pmdp, va);
+
+	pte_clear(&init_mm, va, ptep);
+	flush_tlb_kernel_range(va, va + PAGE_SIZE);
+}
+
 /*
  * This is called when relaxing access to a PTE. It's also called in the page
  * fault path when we don't hit any of the major fault cases, ie, a minor
-- 
2.34.1

[PATCH 5.16 040/203] s390/module: test loading modules with a lot of relocations

[Greg Kroah-Hartman]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit 90c5318795eefa09a9f9aef8d18a904e24962b5c ]

Add a test in order to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/Kconfig                    | 15 +++++++++
 arch/s390/lib/Makefile               |  3 ++
 arch/s390/lib/test_modules.c         | 35 +++++++++++++++++++
 arch/s390/lib/test_modules.h         | 50 ++++++++++++++++++++++++++++
 arch/s390/lib/test_modules_helpers.c | 13 ++++++++
 5 files changed, 116 insertions(+)
 create mode 100644 arch/s390/lib/test_modules.c
 create mode 100644 arch/s390/lib/test_modules.h
 create mode 100644 arch/s390/lib/test_modules_helpers.c

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2a5bb4f29cfed..0344c68f3ffde 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -947,6 +947,9 @@ config S390_GUEST
 
 endmenu
 
+config S390_MODULES_SANITY_TEST_HELPERS
+	def_bool n
+
 menu "Selftests"
 
 config S390_UNWIND_SELFTEST
@@ -973,4 +976,16 @@ config S390_KPROBES_SANITY_TEST
 
 	  Say N if you are unsure.
 
+config S390_MODULES_SANITY_TEST
+	def_tristate n
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	prompt "Enable s390 specific modules tests"
+	select S390_MODULES_SANITY_TEST_HELPERS
+	help
+	  This option enables an s390 specific modules test. This option is
+	  not useful for distributions or general kernels, but only for
+	  kernel developers working on architecture code.
+
+	  Say N if you are unsure.
 endmenu
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 707cd4622c132..69feb8ed3312d 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -17,4 +17,7 @@ KASAN_SANITIZE_uaccess.o := n
 obj-$(CONFIG_S390_UNWIND_SELFTEST) += test_unwind.o
 CFLAGS_test_unwind.o += -fno-optimize-sibling-calls
 
+obj-$(CONFIG_S390_MODULES_SANITY_TEST) += test_modules.o
+obj-$(CONFIG_S390_MODULES_SANITY_TEST_HELPERS) += test_modules_helpers.o
+
 lib-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
diff --git a/arch/s390/lib/test_modules.c b/arch/s390/lib/test_modules.c
new file mode 100644
index 0000000000000..d056baa8fbb0c
--- /dev/null
+++ b/arch/s390/lib/test_modules.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <kunit/test.h>
+#include <linux/module.h>
+
+#include "test_modules.h"
+
+#define DECLARE_RETURN(i) int test_modules_return_ ## i(void)
+REPEAT_10000(DECLARE_RETURN);
+
+/*
+ * Test that modules with many relocations are loaded properly.
+ */
+static void test_modules_many_vmlinux_relocs(struct kunit *test)
+{
+	int result = 0;
+
+#define CALL_RETURN(i) result += test_modules_return_ ## i()
+	REPEAT_10000(CALL_RETURN);
+	KUNIT_ASSERT_EQ(test, result, 49995000);
+}
+
+static struct kunit_case modules_testcases[] = {
+	KUNIT_CASE(test_modules_many_vmlinux_relocs),
+	{}
+};
+
+static struct kunit_suite modules_test_suite = {
+	.name = "modules_test_s390",
+	.test_cases = modules_testcases,
+};
+
+kunit_test_suites(&modules_test_suite);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/s390/lib/test_modules.h b/arch/s390/lib/test_modules.h
new file mode 100644
index 0000000000000..43b5e4b4af3e4
--- /dev/null
+++ b/arch/s390/lib/test_modules.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef TEST_MODULES_H
+#define TEST_MODULES_H
+
+#define __REPEAT_10000_3(f, x) \
+	f(x ## 0); \
+	f(x ## 1); \
+	f(x ## 2); \
+	f(x ## 3); \
+	f(x ## 4); \
+	f(x ## 5); \
+	f(x ## 6); \
+	f(x ## 7); \
+	f(x ## 8); \
+	f(x ## 9)
+#define __REPEAT_10000_2(f, x) \
+	__REPEAT_10000_3(f, x ## 0); \
+	__REPEAT_10000_3(f, x ## 1); \
+	__REPEAT_10000_3(f, x ## 2); \
+	__REPEAT_10000_3(f, x ## 3); \
+	__REPEAT_10000_3(f, x ## 4); \
+	__REPEAT_10000_3(f, x ## 5); \
+	__REPEAT_10000_3(f, x ## 6); \
+	__REPEAT_10000_3(f, x ## 7); \
+	__REPEAT_10000_3(f, x ## 8); \
+	__REPEAT_10000_3(f, x ## 9)
+#define __REPEAT_10000_1(f, x) \
+	__REPEAT_10000_2(f, x ## 0); \
+	__REPEAT_10000_2(f, x ## 1); \
+	__REPEAT_10000_2(f, x ## 2); \
+	__REPEAT_10000_2(f, x ## 3); \
+	__REPEAT_10000_2(f, x ## 4); \
+	__REPEAT_10000_2(f, x ## 5); \
+	__REPEAT_10000_2(f, x ## 6); \
+	__REPEAT_10000_2(f, x ## 7); \
+	__REPEAT_10000_2(f, x ## 8); \
+	__REPEAT_10000_2(f, x ## 9)
+#define REPEAT_10000(f) \
+	__REPEAT_10000_1(f, 0); \
+	__REPEAT_10000_1(f, 1); \
+	__REPEAT_10000_1(f, 2); \
+	__REPEAT_10000_1(f, 3); \
+	__REPEAT_10000_1(f, 4); \
+	__REPEAT_10000_1(f, 5); \
+	__REPEAT_10000_1(f, 6); \
+	__REPEAT_10000_1(f, 7); \
+	__REPEAT_10000_1(f, 8); \
+	__REPEAT_10000_1(f, 9)
+
+#endif
diff --git a/arch/s390/lib/test_modules_helpers.c b/arch/s390/lib/test_modules_helpers.c
new file mode 100644
index 0000000000000..1670349a03eba
--- /dev/null
+++ b/arch/s390/lib/test_modules_helpers.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/export.h>
+
+#include "test_modules.h"
+
+#define DEFINE_RETURN(i) \
+	int test_modules_return_ ## i(void) \
+	{ \
+		return 1 ## i - 10000; \
+	} \
+	EXPORT_SYMBOL_GPL(test_modules_return_ ## i)
+REPEAT_10000(DEFINE_RETURN);
-- 
2.34.1

[PATCH 5.16 041/203] arm64: Add Cortex-X2 CPU part definition

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 72bb9dcb6c33cfac80282713c2b4f2b254cd24d1 ]

Add the CPU Partnumbers for the new Arm designs.

Cc: Will Deacon <will@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1642994138-25887-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cputype.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index e8fdc10395b6a..999b9149f8568 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -75,6 +75,7 @@
 #define ARM_CPU_PART_CORTEX_A77		0xD0D
 #define ARM_CPU_PART_CORTEX_A510	0xD46
 #define ARM_CPU_PART_CORTEX_A710	0xD47
+#define ARM_CPU_PART_CORTEX_X2		0xD48
 #define ARM_CPU_PART_NEOVERSE_N2	0xD49
 
 #define APM_CPU_PART_POTENZA		0x000
@@ -118,6 +119,7 @@
 #define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
 #define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
 #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
+#define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
 #define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
-- 
2.34.1

[PATCH 5.16 041/203] arm64: Add Cortex-X2 CPU part definition

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 72bb9dcb6c33cfac80282713c2b4f2b254cd24d1 ]

Add the CPU Partnumbers for the new Arm designs.

Cc: Will Deacon <will@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1642994138-25887-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cputype.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index e8fdc10395b6a..999b9149f8568 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -75,6 +75,7 @@
 #define ARM_CPU_PART_CORTEX_A77		0xD0D
 #define ARM_CPU_PART_CORTEX_A510	0xD46
 #define ARM_CPU_PART_CORTEX_A710	0xD47
+#define ARM_CPU_PART_CORTEX_X2		0xD48
 #define ARM_CPU_PART_NEOVERSE_N2	0xD49
 
 #define APM_CPU_PART_POTENZA		0x000
@@ -118,6 +119,7 @@
 #define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
 #define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
 #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
+#define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
 #define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
-- 
2.34.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.16 042/203] arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 ranges

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit eb30d838a44c9e59a2a106884f536119859c7257 ]

Errata ARM64_ERRATUM_[2119858|2224489] also affect some Cortex-X2 ranges as
well. Lets update these errata definition and detection to accommodate all
new Cortex-X2 based cpu MIDR ranges.

Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1642994138-25887-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  4 ++++
 arch/arm64/Kconfig                     | 12 ++++++------
 arch/arm64/kernel/cpu_errata.c         |  2 ++
 3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 5342e895fb604..8789c79310bbd 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -98,6 +98,10 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c4207cf9bb17f..d8046c832225c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -671,14 +671,14 @@ config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 	bool
 
 config ARM64_ERRATUM_2119858
-	bool "Cortex-A710: 2119858: workaround TRBE overwriting trace data in FILL mode"
+	bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode"
 	default y
 	depends on CORESIGHT_TRBE
 	select ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 	help
-	  This option adds the workaround for ARM Cortex-A710 erratum 2119858.
+	  This option adds the workaround for ARM Cortex-A710/X2 erratum 2119858.
 
-	  Affected Cortex-A710 cores could overwrite up to 3 cache lines of trace
+	  Affected Cortex-A710/X2 cores could overwrite up to 3 cache lines of trace
 	  data at the base of the buffer (pointed to by TRBASER_EL1) in FILL mode in
 	  the event of a WRAP event.
 
@@ -761,14 +761,14 @@ config ARM64_ERRATUM_2253138
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_2224489
-	bool "Cortex-A710: 2224489: workaround TRBE writing to address out-of-range"
+	bool "Cortex-A710/X2: 2224489: workaround TRBE writing to address out-of-range"
 	depends on CORESIGHT_TRBE
 	default y
 	select ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
 	help
-	  This option adds the workaround for ARM Cortex-A710 erratum 2224489.
+	  This option adds the workaround for ARM Cortex-A710/X2 erratum 2224489.
 
-	  Affected Cortex-A710 cores might write to an out-of-range address, not reserved
+	  Affected Cortex-A710/X2 cores might write to an out-of-range address, not reserved
 	  for TRBE. Under some conditions, the TRBE might generate a write to the next
 	  virtually addressed page following the last page of the TRBE address space
 	  (i.e., the TRBLIMITR_EL1.LIMIT), instead of wrapping around to the base.
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 9e1c1aef9ebd6..29cc062a4153c 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -347,6 +347,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2119858
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_RANGE(MIDR_CORTEX_X2, 0, 0, 2, 0),
 #endif
 	{},
 };
@@ -371,6 +372,7 @@ static struct midr_range trbe_write_out_of_range_cpus[] = {
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2224489
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_RANGE(MIDR_CORTEX_X2, 0, 0, 2, 0),
 #endif
 	{},
 };
-- 
2.34.1

[PATCH 5.16 042/203] arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 ranges

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit eb30d838a44c9e59a2a106884f536119859c7257 ]

Errata ARM64_ERRATUM_[2119858|2224489] also affect some Cortex-X2 ranges as
well. Lets update these errata definition and detection to accommodate all
new Cortex-X2 based cpu MIDR ranges.

Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1642994138-25887-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  4 ++++
 arch/arm64/Kconfig                     | 12 ++++++------
 arch/arm64/kernel/cpu_errata.c         |  2 ++
 3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 5342e895fb604..8789c79310bbd 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -98,6 +98,10 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c4207cf9bb17f..d8046c832225c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -671,14 +671,14 @@ config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 	bool
 
 config ARM64_ERRATUM_2119858
-	bool "Cortex-A710: 2119858: workaround TRBE overwriting trace data in FILL mode"
+	bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode"
 	default y
 	depends on CORESIGHT_TRBE
 	select ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 	help
-	  This option adds the workaround for ARM Cortex-A710 erratum 2119858.
+	  This option adds the workaround for ARM Cortex-A710/X2 erratum 2119858.
 
-	  Affected Cortex-A710 cores could overwrite up to 3 cache lines of trace
+	  Affected Cortex-A710/X2 cores could overwrite up to 3 cache lines of trace
 	  data at the base of the buffer (pointed to by TRBASER_EL1) in FILL mode in
 	  the event of a WRAP event.
 
@@ -761,14 +761,14 @@ config ARM64_ERRATUM_2253138
 	  If unsure, say Y.
 
 config ARM64_ERRATUM_2224489
-	bool "Cortex-A710: 2224489: workaround TRBE writing to address out-of-range"
+	bool "Cortex-A710/X2: 2224489: workaround TRBE writing to address out-of-range"
 	depends on CORESIGHT_TRBE
 	default y
 	select ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
 	help
-	  This option adds the workaround for ARM Cortex-A710 erratum 2224489.
+	  This option adds the workaround for ARM Cortex-A710/X2 erratum 2224489.
 
-	  Affected Cortex-A710 cores might write to an out-of-range address, not reserved
+	  Affected Cortex-A710/X2 cores might write to an out-of-range address, not reserved
 	  for TRBE. Under some conditions, the TRBE might generate a write to the next
 	  virtually addressed page following the last page of the TRBE address space
 	  (i.e., the TRBLIMITR_EL1.LIMIT), instead of wrapping around to the base.
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 9e1c1aef9ebd6..29cc062a4153c 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -347,6 +347,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2119858
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_RANGE(MIDR_CORTEX_X2, 0, 0, 2, 0),
 #endif
 	{},
 };
@@ -371,6 +372,7 @@ static struct midr_range trbe_write_out_of_range_cpus[] = {
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2224489
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_RANGE(MIDR_CORTEX_X2, 0, 0, 2, 0),
 #endif
 	{},
 };
-- 
2.34.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.16 043/203] scsi: target: iscsi: Make sure the np under each tpg is unique

[Greg Kroah-Hartman]

From: ZouMingzhe <mingzhe.zou@easystack.cn>

[ Upstream commit a861790afaa8b6369eee8a88c5d5d73f5799c0c6 ]

iscsit_tpg_check_network_portal() has nested for_each loops and is supposed
to return true when a match is found. However, the tpg loop will still
continue after existing the tpg_np loop. If this tpg_np is not the last the
match value will be changed.

Break the outer loop after finding a match and make sure the np under each
tpg is unique.

Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn
Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target_tpg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c
index 8075f60fd02c3..2d5cf1714ae05 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -443,6 +443,9 @@ static bool iscsit_tpg_check_network_portal(
 				break;
 		}
 		spin_unlock(&tpg->tpg_np_lock);
+
+		if (match)
+			break;
 	}
 	spin_unlock(&tiqn->tiqn_tpg_lock);
 
-- 
2.34.1

[PATCH 5.16 044/203] scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit a65b32748f4566f986ba2495a8236c141fa42a26 ]

devm_kstrdup() returns pointer to allocated string on success, NULL on
failure. So it is better to check the return value of it.

Link: https://lore.kernel.org/r/tencent_4257E15D4A94FF9020DDCC4BB9B21C041408@qq.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd-pltfrm.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 8b16bbbcb806c..87975d1a21c8b 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -92,6 +92,11 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
 		clki->min_freq = clkfreq[i];
 		clki->max_freq = clkfreq[i+1];
 		clki->name = devm_kstrdup(dev, name, GFP_KERNEL);
+		if (!clki->name) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
 		if (!strcmp(name, "ref_clk"))
 			clki->keep_link_active = true;
 		dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
@@ -127,6 +132,8 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
 		return -ENOMEM;
 
 	vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
+	if (!vreg->name)
+		return -ENOMEM;
 
 	snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
 	if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {
-- 
2.34.1

[PATCH 5.16 045/203] scsi: qedf: Add stag_work to all the vports

[Greg Kroah-Hartman]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit b70a99fd13282d7885f69bf1372e28b7506a1613 ]

Call trace seen when creating NPIV ports, only 32 out of 64 show online.
stag work was not initialized for vport, hence initialize the stag work.

WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80
CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE    --------- --
 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021
Workqueue: events fc_lport_timeout [libfc]
RIP: 0010:__queue_delayed_work+0x68/0x80
Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81
f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb
c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23
RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006
RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002
RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788
RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750
R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58
R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18
FS:  0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  queue_delayed_work_on+0x36/0x40
  qedf_elsct_send+0x57/0x60 [qedf]
  fc_lport_enter_flogi+0x90/0xc0 [libfc]
  fc_lport_timeout+0xb7/0x140 [libfc]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x35/0x40
 ---[ end trace 008f00f722f2c2ff ]--

Initialize stag work for all the vports.

Link: https://lore.kernel.org/r/20220117135311.6256-2-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 1bf7a22d49480..6e367b40ecc96 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -1862,6 +1862,7 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled)
 	vport_qedf->cmd_mgr = base_qedf->cmd_mgr;
 	init_completion(&vport_qedf->flogi_compl);
 	INIT_LIST_HEAD(&vport_qedf->fcports);
+	INIT_DELAYED_WORK(&vport_qedf->stag_work, qedf_stag_change_work);
 
 	rc = qedf_vport_libfc_config(vport, vn_port);
 	if (rc) {
-- 
2.34.1

[PATCH 5.16 046/203] scsi: qedf: Fix refcount issue when LOGO is received during TMF

[Greg Kroah-Hartman]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit 5239ab63f17cee643bd4bf6addfedebaa7d4f41e ]

Hung task call trace was seen during LOGO processing.

[  974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued...
[  974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0
[  974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET
[  974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1.
[  974.309625] host1: rport 016900: Received LOGO request while in state Ready
[  974.309627] host1: rport 016900: Delete port
[  974.309642] host1: rport 016900: work event 3
[  974.309644] host1: rport 016900: lld callback ev 3
[  974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush.
[  974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success...
[  984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds.
[  984.031136]       Not tainted 4.18.0-305.el8.x86_64 #1

[  984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  984.031209] jbd2/dm-15-8    D    0  7645      2 0x80004080
[  984.031212] Call Trace:
[  984.031222]  __schedule+0x2c4/0x700
[  984.031230]  ? unfreeze_partials.isra.83+0x16e/0x1a0
[  984.031233]  ? bit_wait_timeout+0x90/0x90
[  984.031235]  schedule+0x38/0xa0
[  984.031238]  io_schedule+0x12/0x40
[  984.031240]  bit_wait_io+0xd/0x50
[  984.031243]  __wait_on_bit+0x6c/0x80
[  984.031248]  ? free_buffer_head+0x21/0x50
[  984.031251]  out_of_line_wait_on_bit+0x91/0xb0
[  984.031257]  ? init_wait_var_entry+0x50/0x50
[  984.031268]  jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2]
[  984.031280]  kjournald2+0xbd/0x270 [jbd2]
[  984.031284]  ? finish_wait+0x80/0x80
[  984.031291]  ? commit_timeout+0x10/0x10 [jbd2]
[  984.031294]  kthread+0x116/0x130
[  984.031300]  ? kthread_flush_work_fn+0x10/0x10
[  984.031305]  ret_from_fork+0x1f/0x40

There was a ref count issue when LOGO is received during TMF. This leads to
one of the I/Os hanging with the driver. Fix the ref count.

Link: https://lore.kernel.org/r/20220117135311.6256-3-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_io.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 99a56ca1fb163..fab43dabe5b31 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -2250,6 +2250,7 @@ int qedf_initiate_cleanup(struct qedf_ioreq *io_req,
 	    io_req->tm_flags == FCP_TMF_TGT_RESET) {
 		clear_bit(QEDF_CMD_OUTSTANDING, &io_req->flags);
 		io_req->sc_cmd = NULL;
+		kref_put(&io_req->refcount, qedf_release_cmd);
 		complete(&io_req->tm_done);
 	}
 
-- 
2.34.1

[PATCH 5.16 047/203] scsi: qedf: Change context reset messages to ratelimited

[Greg Kroah-Hartman]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit 64fd4af6274eb0f49d29772c228fffcf6bde1635 ]

If FCoE is not configured, libfc/libfcoe keeps on retrying FLOGI and after
3 retries driver does a context reset and tries fipvlan again.  This leads
to context reset message flooding the logs. Hence ratelimit the message to
prevent flooding the logs.

Link: https://lore.kernel.org/r/20220117135311.6256-4-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 6e367b40ecc96..e0e03443d7703 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -911,7 +911,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
 	struct qed_link_output if_link;
 
 	if (lport->vport) {
-		QEDF_ERR(NULL, "Cannot issue host reset on NPIV port.\n");
+		printk_ratelimited("Cannot issue host reset on NPIV port.\n");
 		return;
 	}
 
@@ -3979,7 +3979,9 @@ void qedf_stag_change_work(struct work_struct *work)
 	struct qedf_ctx *qedf =
 	    container_of(work, struct qedf_ctx, stag_work.work);
 
-	QEDF_ERR(&qedf->dbg_ctx, "Performing software context reset.\n");
+	printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.",
+			dev_name(&qedf->pdev->dev), __func__, __LINE__,
+			qedf->dbg_ctx.host_no);
 	qedf_ctx_soft_reset(qedf->lport);
 }
 
-- 
2.34.1

[PATCH 5.16 048/203] scsi: pm8001: Fix bogus FW crash for maxcpus=1

[Greg Kroah-Hartman]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 62afb379a0fee7e9c2f9f68e1abeb85ceddf51b9 ]

According to the comment in check_fw_ready() we should not check the
IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers.

However we check this very field in process_oq() for processing the highest
index interrupt vector. The highest interrupt vector is checked as the FW
is programmed to signal fatal errors through this irq.

Change that function to not check IOP1_READY for those mentioned
controllers, but do check ILA_READY in both cases.

The reason I assume that this was not hit earlier was because we always
allocated 64 MSI(X), and just did not pass the vector index check in
process_oq(), i.e.  the handler never ran for vector index 63.

Link: https://lore.kernel.org/r/1642508105-95432-1-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 16 ++++++++++++++--
 drivers/scsi/pm8001/pm80xx_hwi.h |  6 +++++-
 2 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 2101fc5761c3c..4c5b945bf3187 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4161,10 +4161,22 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
 	u32 ret = MPI_IO_STATUS_FAIL;
 	u32 regval;
 
+	/*
+	 * Fatal errors are programmed to be signalled in irq vector
+	 * pm8001_ha->max_q_num - 1 through pm8001_ha->main_cfg_tbl.pm80xx_tbl.
+	 * fatal_err_interrupt
+	 */
 	if (vec == (pm8001_ha->max_q_num - 1)) {
+		u32 mipsall_ready;
+
+		if (pm8001_ha->chip_id == chip_8008 ||
+		    pm8001_ha->chip_id == chip_8009)
+			mipsall_ready = SCRATCH_PAD_MIPSALL_READY_8PORT;
+		else
+			mipsall_ready = SCRATCH_PAD_MIPSALL_READY_16PORT;
+
 		regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
-		if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
-					SCRATCH_PAD_MIPSALL_READY) {
+		if ((regval & mipsall_ready) != mipsall_ready) {
 			pm8001_ha->controller_fatal_error = true;
 			pm8001_dbg(pm8001_ha, FAIL,
 				   "Firmware Fatal error! Regval:0x%x\n",
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index c7e5d93bea924..c41ed039c92ac 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1405,8 +1405,12 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
 #define SCRATCH_PAD_BOOT_LOAD_SUCCESS	0x0
 #define SCRATCH_PAD_IOP0_READY		0xC00
 #define SCRATCH_PAD_IOP1_READY		0x3000
-#define SCRATCH_PAD_MIPSALL_READY	(SCRATCH_PAD_IOP1_READY | \
+#define SCRATCH_PAD_MIPSALL_READY_16PORT	(SCRATCH_PAD_IOP1_READY | \
 					SCRATCH_PAD_IOP0_READY | \
+					SCRATCH_PAD_ILA_READY | \
+					SCRATCH_PAD_RAAE_READY)
+#define SCRATCH_PAD_MIPSALL_READY_8PORT	(SCRATCH_PAD_IOP0_READY | \
+					SCRATCH_PAD_ILA_READY | \
 					SCRATCH_PAD_RAAE_READY)
 
 /* boot loader state */
-- 
2.34.1

[PATCH 5.16 049/203] scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()

[Greg Kroah-Hartman]

From: Kiwoong Kim <kwmad.kim@samsung.com>

[ Upstream commit ad6c8a426446873febc98140d81d5353f8c0825b ]

The return value of ufshcd_set_dev_pwr_mode() is passed to device PM
core. However, the function currently returns a SCSI result which the PM
core doesn't understand.  This might lead to unexpected behaviors in
userland; a platform reset was observed in Android.

Use a generic error code for SSU failures.

Link: https://lore.kernel.org/r/1642743182-54098-1-git-send-email-kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c94377aa82739..ec7d7e01231d7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8587,7 +8587,7 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
  * @pwr_mode: device power mode to set
  *
  * Returns 0 if requested power mode is set successfully
- * Returns non-zero if failed to set the requested power mode
+ * Returns < 0 if failed to set the requested power mode
  */
 static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
 				     enum ufs_dev_pwr_mode pwr_mode)
@@ -8641,8 +8641,11 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
 		sdev_printk(KERN_WARNING, sdp,
 			    "START_STOP failed for power mode: %d, result %x\n",
 			    pwr_mode, ret);
-		if (ret > 0 && scsi_sense_valid(&sshdr))
-			scsi_print_sense_hdr(sdp, NULL, &sshdr);
+		if (ret > 0) {
+			if (scsi_sense_valid(&sshdr))
+				scsi_print_sense_hdr(sdp, NULL, &sshdr);
+			ret = -EIO;
+		}
 	}
 
 	if (!ret)
-- 
2.34.1

[PATCH 5.16 050/203] scsi: ufs: Treat link loss as fatal error

[Greg Kroah-Hartman]

From: Kiwoong Kim <kwmad.kim@samsung.com>

[ Upstream commit c99b9b2301492b665b6e51ba6c06ec362eddcd10 ]

This event is raised when link is lost as specified in UFSHCI spec and that
means communication is not possible. Thus initializing UFS interface needs
to be done.

Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS
mask. This will trigger a host reset whenever a link lost interrupt occurs.

Link: https://lore.kernel.org/r/1642743475-54275-1-git-send-email-kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshci.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 6a295c88d850f..a7ff0e5b54946 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -142,7 +142,8 @@ static inline u32 ufshci_version(u32 major, u32 minor)
 #define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
 				SYSTEM_BUS_FATAL_ERROR |\
-				CRYPTO_ENGINE_FATAL_ERROR)
+				CRYPTO_ENGINE_FATAL_ERROR |\
+				UIC_LINK_LOST)
 
 /* HCS - Host Controller Status 30h */
 #define DEVICE_PRESENT				0x1
-- 
2.34.1

[PATCH 5.16 051/203] scsi: myrs: Fix crash in error case

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 4db09593af0b0b4d7d4805ebb3273df51d7cc30d ]

In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails
with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and
crash the kernel.

[    1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A
[    1.105872] myrs 0000:00:03.0: Failed to initialize Controller
[    1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.110774] Call Trace:
[    1.110950]  myrs_cleanup+0xe4/0x150 [myrs]
[    1.111135]  myrs_probe.cold+0x91/0x56a [myrs]
[    1.111302]  ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs]
[    1.111500]  local_pci_probe+0x48/0x90

Link: https://lore.kernel.org/r/20220123225717.1069538-1-ztong0001@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/myrs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index 6ea323e9a2e34..f6dbc8f2f60a3 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -2269,7 +2269,8 @@ static void myrs_cleanup(struct myrs_hba *cs)
 	myrs_unmap(cs);
 
 	if (cs->mmio_base) {
-		cs->disable_intr(cs);
+		if (cs->disable_intr)
+			cs->disable_intr(cs);
 		iounmap(cs->mmio_base);
 		cs->mmio_base = NULL;
 	}
-- 
2.34.1

[PATCH 5.16 052/203] net: stmmac: reduce unnecessary wakeups from eee sw timer

[Greg Kroah-Hartman]

From: Jisheng Zhang <jszhang@kernel.org>

[ Upstream commit c74ead223deb88bdf18af8c772d7ca5a9b6c3c2b ]

Currently, on EEE capable platforms, if EEE SW timer is used, the SW
timer cause 1 wakeup/s even if the TX has successfully entered EEE.
Remove this unnecessary wakeup by only calling mod_timer() if we
haven't successfully entered EEE.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c5ad28e543e43..f4015579e8adc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -400,7 +400,7 @@ static void stmmac_lpi_entry_timer_config(struct stmmac_priv *priv, bool en)
  * Description: this function is to verify and enter in LPI mode in case of
  * EEE.
  */
-static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
+static int stmmac_enable_eee_mode(struct stmmac_priv *priv)
 {
 	u32 tx_cnt = priv->plat->tx_queues_to_use;
 	u32 queue;
@@ -410,13 +410,14 @@ static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
 		struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
 
 		if (tx_q->dirty_tx != tx_q->cur_tx)
-			return; /* still unfinished work */
+			return -EBUSY; /* still unfinished work */
 	}
 
 	/* Check and enter in LPI mode */
 	if (!priv->tx_path_in_lpi_mode)
 		stmmac_set_eee_mode(priv, priv->hw,
 				priv->plat->en_tx_lpi_clockgating);
+	return 0;
 }
 
 /**
@@ -448,8 +449,8 @@ static void stmmac_eee_ctrl_timer(struct timer_list *t)
 {
 	struct stmmac_priv *priv = from_timer(priv, t, eee_ctrl_timer);
 
-	stmmac_enable_eee_mode(priv);
-	mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
+	if (stmmac_enable_eee_mode(priv))
+		mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
 }
 
 /**
@@ -2641,8 +2642,8 @@ static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue)
 
 	if (priv->eee_enabled && !priv->tx_path_in_lpi_mode &&
 	    priv->eee_sw_timer_en) {
-		stmmac_enable_eee_mode(priv);
-		mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
+		if (stmmac_enable_eee_mode(priv))
+			mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
 	}
 
 	/* We still have pending packets, let's call for a new scheduling */
-- 
2.34.1

[PATCH 5.16 053/203] PM: hibernate: Remove register_nosave_region_late()

[Greg Kroah-Hartman]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 33569ef3c754a82010f266b7b938a66a3ccf90a4 ]

It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/suspend.h | 11 +----------
 kernel/power/snapshot.c | 21 +++++++--------------
 2 files changed, 8 insertions(+), 24 deletions(-)

diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 8af13ba60c7e4..c1310c571d805 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -430,15 +430,7 @@ struct platform_hibernation_ops {
 
 #ifdef CONFIG_HIBERNATION
 /* kernel/power/snapshot.c */
-extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
-static inline void __init register_nosave_region(unsigned long b, unsigned long e)
-{
-	__register_nosave_region(b, e, 0);
-}
-static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
-{
-	__register_nosave_region(b, e, 1);
-}
+extern void register_nosave_region(unsigned long b, unsigned long e);
 extern int swsusp_page_is_forbidden(struct page *);
 extern void swsusp_set_page_free(struct page *);
 extern void swsusp_unset_page_free(struct page *);
@@ -457,7 +449,6 @@ int pfn_is_nosave(unsigned long pfn);
 int hibernate_quiet_exec(int (*func)(void *data), void *data);
 #else /* CONFIG_HIBERNATION */
 static inline void register_nosave_region(unsigned long b, unsigned long e) {}
-static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 static inline void swsusp_set_page_free(struct page *p) {}
 static inline void swsusp_unset_page_free(struct page *p) {}
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index f7a9860782135..330d499376924 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -978,8 +978,7 @@ static void memory_bm_recycle(struct memory_bitmap *bm)
  * Register a range of page frames the contents of which should not be saved
  * during hibernation (to be used in the early initialization code).
  */
-void __init __register_nosave_region(unsigned long start_pfn,
-				     unsigned long end_pfn, int use_kmalloc)
+void __init register_nosave_region(unsigned long start_pfn, unsigned long end_pfn)
 {
 	struct nosave_region *region;
 
@@ -995,18 +994,12 @@ void __init __register_nosave_region(unsigned long start_pfn,
 			goto Report;
 		}
 	}
-	if (use_kmalloc) {
-		/* During init, this shouldn't fail */
-		region = kmalloc(sizeof(struct nosave_region), GFP_KERNEL);
-		BUG_ON(!region);
-	} else {
-		/* This allocation cannot fail */
-		region = memblock_alloc(sizeof(struct nosave_region),
-					SMP_CACHE_BYTES);
-		if (!region)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(struct nosave_region));
-	}
+	/* This allocation cannot fail */
+	region = memblock_alloc(sizeof(struct nosave_region),
+				SMP_CACHE_BYTES);
+	if (!region)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(struct nosave_region));
 	region->start_pfn = start_pfn;
 	region->end_pfn = end_pfn;
 	list_add_tail(&region->list, &nosave_regions);
-- 
2.34.1

[PATCH 5.16 054/203] drm/amd/display: Correct MPC split policy for DCN301

[Greg Kroah-Hartman]

From: Zhan Liu <zhan.liu@amd.com>

[ Upstream commit ac46d93235074a6c5d280d35771c23fd8620e7d9 ]

[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.

[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
index 9254da120e615..36814d44b19cf 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c
@@ -686,7 +686,7 @@ static const struct dc_debug_options debug_defaults_drv = {
 	.disable_clock_gate = true,
 	.disable_pplib_clock_request = true,
 	.disable_pplib_wm_range = true,
-	.pipe_split_policy = MPC_SPLIT_DYNAMIC,
+	.pipe_split_policy = MPC_SPLIT_AVOID,
 	.force_single_disp_pipe_split = false,
 	.disable_dcc = DCC_ENABLE,
 	.vsr_support = true,
-- 
2.34.1

[PATCH 5.16 055/203] drm/amdgpu/display: adjust msleep limit in dp_wait_for_training_aux_rd_interval

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit dc919d670c6fd1ac81ebf31625cd19579f7b3d4c ]

Some architectures (e.g., ARM) have relatively low udelay limits.
On most architectures, anything longer than 2000us is not recommended.
Change the check to align with other similar checks in DC.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index ccd6cdbe46f43..b97be2e9088ce 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -201,7 +201,7 @@ void dp_wait_for_training_aux_rd_interval(
 	uint32_t wait_in_micro_secs)
 {
 #if defined(CONFIG_DRM_AMD_DC_DCN)
-	if (wait_in_micro_secs > 16000)
+	if (wait_in_micro_secs > 1000)
 		msleep(wait_in_micro_secs/1000);
 	else
 		udelay(wait_in_micro_secs);
-- 
2.34.1

[PATCH 5.16 056/203] drm/amdgpu/display: use msleep rather than udelay for long delays

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 98fdcacb45f7cd2092151d6af2e60152811eb79c ]

Some architectures (e.g., ARM) throw an compilation error if the
udelay is too long.  In general udelays of longer than 2000us are
not recommended on any architecture.  Switch to msleep in these
cases.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index b97be2e9088ce..94e75199d9428 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -6058,7 +6058,7 @@ bool dpcd_write_128b_132b_sst_payload_allocation_table(
 			}
 		}
 		retries++;
-		udelay(5000);
+		msleep(5);
 	}
 
 	if (!result && retries == max_retries) {
@@ -6110,7 +6110,7 @@ bool dpcd_poll_for_allocation_change_trigger(struct dc_link *link)
 			break;
 		}
 
-		udelay(5000);
+		msleep(5);
 	}
 
 	if (result == ACT_FAILED) {
-- 
2.34.1

[PATCH 5.16 057/203] usb: dwc2: gadget: dont try to disable ep0 in dwc2_hsotg_suspend

[Greg Kroah-Hartman]

From: Amelie Delaunay <amelie.delaunay@foss.st.com>

[ Upstream commit ac55d163855924aa5af9f1560977da8f346963c8 ]

Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following
logs before returning -EINVAL:
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0

To avoid these two logs while suspending, start disabling the endpoint
from the index 1, as done in dwc2_hsotg_udc_stop:

	/* all endpoints should be shutdown */
	for (ep = 1; ep < hsotg->num_of_eps; ep++) {
		if (hsotg->eps_in[ep])
			dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
		if (hsotg->eps_out[ep])
			dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
	}

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 43cf49c4e5e59..da82e4140d545 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -5097,7 +5097,7 @@ int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg)
 		hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 
-		for (ep = 0; ep < hsotg->num_of_eps; ep++) {
+		for (ep = 1; ep < hsotg->num_of_eps; ep++) {
 			if (hsotg->eps_in[ep])
 				dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
 			if (hsotg->eps_out[ep])
-- 
2.34.1

[PATCH 5.16 058/203] perf: Always wake the parent event

[Greg Kroah-Hartman]

From: James Clark <james.clark@arm.com>

[ Upstream commit 961c39121759ad09a89598ec4ccdd34ae0468a19 ]

When using per-process mode and event inheritance is set to true,
forked processes will create a new perf events via inherit_event() ->
perf_event_alloc(). But these events will not have ring buffers
assigned to them. Any call to wakeup will be dropped if it's called on
an event with no ring buffer assigned because that's the object that
holds the wakeup list.

If the child event is disabled due to a call to
perf_aux_output_begin() or perf_aux_output_end(), the wakeup is
dropped leaving userspace hanging forever on the poll.

Normally the event is explicitly re-enabled by userspace after it
wakes up to read the aux data, but in this case it does not get woken
up so the event remains disabled.

This can be reproduced when using Arm SPE and 'stress' which forks once
before running the workload. By looking at the list of aux buffers read,
it's apparent that they stop after the fork:

  perf record -e arm_spe// -vvv -- stress -c 1

With this patch applied they continue to be printed. This behaviour
doesn't happen when using systemwide or per-cpu mode.

Reported-by: Ruben Ayrapetyan <Ruben.Ayrapetyan@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211206113840.130802-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 04e6e2dae60e4..a0e21d0f36d7a 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6004,6 +6004,8 @@ static void ring_buffer_attach(struct perf_event *event,
 	struct perf_buffer *old_rb = NULL;
 	unsigned long flags;
 
+	WARN_ON_ONCE(event->parent);
+
 	if (event->rb) {
 		/*
 		 * Should be impossible, we set this when removing
@@ -6061,6 +6063,9 @@ static void ring_buffer_wakeup(struct perf_event *event)
 {
 	struct perf_buffer *rb;
 
+	if (event->parent)
+		event = event->parent;
+
 	rcu_read_lock();
 	rb = rcu_dereference(event->rb);
 	if (rb) {
@@ -6074,6 +6079,9 @@ struct perf_buffer *ring_buffer_get(struct perf_event *event)
 {
 	struct perf_buffer *rb;
 
+	if (event->parent)
+		event = event->parent;
+
 	rcu_read_lock();
 	rb = rcu_dereference(event->rb);
 	if (rb) {
@@ -6772,7 +6780,7 @@ static unsigned long perf_prepare_sample_aux(struct perf_event *event,
 	if (WARN_ON_ONCE(READ_ONCE(sampler->oncpu) != smp_processor_id()))
 		goto out;
 
-	rb = ring_buffer_get(sampler->parent ? sampler->parent : sampler);
+	rb = ring_buffer_get(sampler);
 	if (!rb)
 		goto out;
 
@@ -6838,7 +6846,7 @@ static void perf_aux_sample_output(struct perf_event *event,
 	if (WARN_ON_ONCE(!sampler || !data->aux_size))
 		return;
 
-	rb = ring_buffer_get(sampler->parent ? sampler->parent : sampler);
+	rb = ring_buffer_get(sampler);
 	if (!rb)
 		return;
 
-- 
2.34.1

[PATCH 5.16 059/203] nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs

[Greg Kroah-Hartman]

From: Wu Zheng <wu.zheng@intel.com>

[ Upstream commit 25e58af4be412d59e056da65cc1cefbd89185bd2 ]

The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.

Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.

Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index ca2ee806d74b6..953ea3d5d4bfb 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3326,7 +3326,8 @@ static const struct pci_device_id nvme_id_table[] = {
 				NVME_QUIRK_DEALLOCATE_ZEROES, },
 	{ PCI_VDEVICE(INTEL, 0x0a54),	/* Intel P4500/P4600 */
 		.driver_data = NVME_QUIRK_STRIPE_SIZE |
-				NVME_QUIRK_DEALLOCATE_ZEROES, },
+				NVME_QUIRK_DEALLOCATE_ZEROES |
+				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_VDEVICE(INTEL, 0x0a55),	/* Dell Express Flash P4600 */
 		.driver_data = NVME_QUIRK_STRIPE_SIZE |
 				NVME_QUIRK_DEALLOCATE_ZEROES, },
-- 
2.34.1

[PATCH 5.16 060/203] MIPS: Fix build error due to PTR used in more places

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

[ Upstream commit fa62f39dc7e25fc16371b958ac59b9a6fd260bea ]

Use PTR_WD instead of PTR to avoid clashes with other parts.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/asm.h            |   4 +-
 arch/mips/include/asm/ftrace.h         |   4 +-
 arch/mips/include/asm/r4kcache.h       |   4 +-
 arch/mips/include/asm/unaligned-emul.h | 176 ++++++++++++-------------
 arch/mips/kernel/mips-r2-to-r6-emul.c  | 104 +++++++--------
 arch/mips/kernel/r2300_fpu.S           |   6 +-
 arch/mips/kernel/r4k_fpu.S             |   2 +-
 arch/mips/kernel/relocate_kernel.S     |  22 ++--
 arch/mips/kernel/scall32-o32.S         |  10 +-
 arch/mips/kernel/scall64-n32.S         |   2 +-
 arch/mips/kernel/scall64-n64.S         |   2 +-
 arch/mips/kernel/scall64-o32.S         |  10 +-
 arch/mips/kernel/syscall.c             |   8 +-
 arch/mips/lib/csum_partial.S           |   4 +-
 arch/mips/lib/memcpy.S                 |   4 +-
 arch/mips/lib/memset.S                 |   2 +-
 arch/mips/lib/strncpy_user.S           |   4 +-
 arch/mips/lib/strnlen_user.S           |   2 +-
 18 files changed, 185 insertions(+), 185 deletions(-)

diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
index 2f8ce94ebaafe..cc69f1deb1ca8 100644
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -276,7 +276,7 @@ symbol		=	value
 
 #define PTR_SCALESHIFT	2
 
-#define PTR		.word
+#define PTR_WD		.word
 #define PTRSIZE		4
 #define PTRLOG		2
 #endif
@@ -301,7 +301,7 @@ symbol		=	value
 
 #define PTR_SCALESHIFT	3
 
-#define PTR		.dword
+#define PTR_WD		.dword
 #define PTRSIZE		8
 #define PTRLOG		3
 #endif
diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h
index b463f2aa5a613..db497a8167da2 100644
--- a/arch/mips/include/asm/ftrace.h
+++ b/arch/mips/include/asm/ftrace.h
@@ -32,7 +32,7 @@ do {							\
 		".previous\n"				\
 							\
 		".section\t__ex_table,\"a\"\n\t"	\
-		STR(PTR) "\t1b, 3b\n\t"			\
+		STR(PTR_WD) "\t1b, 3b\n\t"		\
 		".previous\n"				\
 							\
 		: [tmp_dst] "=&r" (dst), [tmp_err] "=r" (error)\
@@ -54,7 +54,7 @@ do {						\
 		".previous\n"			\
 						\
 		".section\t__ex_table,\"a\"\n\t"\
-		STR(PTR) "\t1b, 3b\n\t"		\
+		STR(PTR_WD) "\t1b, 3b\n\t"	\
 		".previous\n"			\
 						\
 		: [tmp_err] "=r" (error)	\
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index af3788589ee6d..431a1c9d53fc7 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -119,7 +119,7 @@ static inline void flush_scache_line(unsigned long addr)
 	"	j	2b			\n"		\
 	"	.previous			\n"		\
 	"	.section __ex_table,\"a\"	\n"		\
-	"	"STR(PTR)" 1b, 3b		\n"		\
+	"	"STR(PTR_WD)" 1b, 3b		\n"		\
 	"	.previous"					\
 	: "+r" (__err)						\
 	: "i" (op), "r" (addr), "i" (-EFAULT));			\
@@ -142,7 +142,7 @@ static inline void flush_scache_line(unsigned long addr)
 	"	j	2b			\n"		\
 	"	.previous			\n"		\
 	"	.section __ex_table,\"a\"	\n"		\
-	"	"STR(PTR)" 1b, 3b		\n"		\
+	"	"STR(PTR_WD)" 1b, 3b		\n"		\
 	"	.previous"					\
 	: "+r" (__err)						\
 	: "i" (op), "r" (addr), "i" (-EFAULT));			\
diff --git a/arch/mips/include/asm/unaligned-emul.h b/arch/mips/include/asm/unaligned-emul.h
index 2022b18944b97..9af0f4d3d288c 100644
--- a/arch/mips/include/asm/unaligned-emul.h
+++ b/arch/mips/include/asm/unaligned-emul.h
@@ -20,8 +20,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -41,8 +41,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -74,10 +74,10 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (value), "=r" (res)	    \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -102,8 +102,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -125,8 +125,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -145,8 +145,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -178,10 +178,10 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (value), "=r" (res)	    \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -223,14 +223,14 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
-		STR(PTR)"\t5b, 11b\n\t"		    \
-		STR(PTR)"\t6b, 11b\n\t"		    \
-		STR(PTR)"\t7b, 11b\n\t"		    \
-		STR(PTR)"\t8b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
+		STR(PTR_WD)"\t5b, 11b\n\t"	    \
+		STR(PTR_WD)"\t6b, 11b\n\t"	    \
+		STR(PTR_WD)"\t7b, 11b\n\t"	    \
+		STR(PTR_WD)"\t8b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (value), "=r" (res)	    \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -255,8 +255,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"              \
-		STR(PTR)"\t2b, 4b\n\t"              \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=r" (res)                        \
 		: "r" (value), "r" (addr), "i" (-EFAULT));\
@@ -276,8 +276,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=r" (res)                                \
 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
@@ -296,8 +296,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=r" (res)                                \
 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
@@ -325,10 +325,10 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (res)				    \
 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
@@ -365,14 +365,14 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
-		STR(PTR)"\t5b, 11b\n\t"		    \
-		STR(PTR)"\t6b, 11b\n\t"		    \
-		STR(PTR)"\t7b, 11b\n\t"		    \
-		STR(PTR)"\t8b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
+		STR(PTR_WD)"\t5b, 11b\n\t"	    \
+		STR(PTR_WD)"\t6b, 11b\n\t"	    \
+		STR(PTR_WD)"\t7b, 11b\n\t"	    \
+		STR(PTR_WD)"\t8b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (res)				    \
 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
@@ -398,8 +398,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -419,8 +419,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -452,10 +452,10 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (value), "=r" (res)	    \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -481,8 +481,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -504,8 +504,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -524,8 +524,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=&r" (value), "=r" (res)         \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -557,10 +557,10 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (value), "=r" (res)	    \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -602,14 +602,14 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
-		STR(PTR)"\t5b, 11b\n\t"		    \
-		STR(PTR)"\t6b, 11b\n\t"		    \
-		STR(PTR)"\t7b, 11b\n\t"		    \
-		STR(PTR)"\t8b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
+		STR(PTR_WD)"\t5b, 11b\n\t"	    \
+		STR(PTR_WD)"\t6b, 11b\n\t"	    \
+		STR(PTR_WD)"\t7b, 11b\n\t"	    \
+		STR(PTR_WD)"\t8b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (value), "=r" (res)	    \
 		: "r" (addr), "i" (-EFAULT));       \
@@ -632,8 +632,8 @@ do {                                                 \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=r" (res)                        \
 		: "r" (value), "r" (addr), "i" (-EFAULT));\
@@ -653,8 +653,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=r" (res)                                \
 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
@@ -673,8 +673,8 @@ do {                                                \
 		"j\t3b\n\t"                         \
 		".previous\n\t"                     \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 4b\n\t"               \
-		STR(PTR)"\t2b, 4b\n\t"               \
+		STR(PTR_WD)"\t1b, 4b\n\t"           \
+		STR(PTR_WD)"\t2b, 4b\n\t"           \
 		".previous"                         \
 		: "=r" (res)                                \
 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
@@ -703,10 +703,10 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (res)				    \
 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
@@ -743,14 +743,14 @@ do {                                                \
 		"j\t10b\n\t"			    \
 		".previous\n\t"			    \
 		".section\t__ex_table,\"a\"\n\t"    \
-		STR(PTR)"\t1b, 11b\n\t"		    \
-		STR(PTR)"\t2b, 11b\n\t"		    \
-		STR(PTR)"\t3b, 11b\n\t"		    \
-		STR(PTR)"\t4b, 11b\n\t"		    \
-		STR(PTR)"\t5b, 11b\n\t"		    \
-		STR(PTR)"\t6b, 11b\n\t"		    \
-		STR(PTR)"\t7b, 11b\n\t"		    \
-		STR(PTR)"\t8b, 11b\n\t"		    \
+		STR(PTR_WD)"\t1b, 11b\n\t"	    \
+		STR(PTR_WD)"\t2b, 11b\n\t"	    \
+		STR(PTR_WD)"\t3b, 11b\n\t"	    \
+		STR(PTR_WD)"\t4b, 11b\n\t"	    \
+		STR(PTR_WD)"\t5b, 11b\n\t"	    \
+		STR(PTR_WD)"\t6b, 11b\n\t"	    \
+		STR(PTR_WD)"\t7b, 11b\n\t"	    \
+		STR(PTR_WD)"\t8b, 11b\n\t"	    \
 		".previous"			    \
 		: "=&r" (res)				    \
 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index a39ec755e4c24..750fe569862b6 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -1258,10 +1258,10 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"	j	10b\n"
 			"	.previous\n"
 			"	.section	__ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
 			"	.previous\n"
 			"	.set	pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -1333,10 +1333,10 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"	j	10b\n"
 			"       .previous\n"
 			"	.section	__ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
 			"	.previous\n"
 			"	.set	pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -1404,10 +1404,10 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"	j	9b\n"
 			"	.previous\n"
 			"	.section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
 			"	.previous\n"
 			"	.set	pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -1474,10 +1474,10 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"	j	9b\n"
 			"	.previous\n"
 			"	.section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
 			"	.previous\n"
 			"	.set	pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -1589,14 +1589,14 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"	j	9b\n"
 			"	.previous\n"
 			"	.section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
-			STR(PTR) " 5b,8b\n"
-			STR(PTR) " 6b,8b\n"
-			STR(PTR) " 7b,8b\n"
-			STR(PTR) " 0b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
+			STR(PTR_WD) " 5b,8b\n"
+			STR(PTR_WD) " 6b,8b\n"
+			STR(PTR_WD) " 7b,8b\n"
+			STR(PTR_WD) " 0b,8b\n"
 			"	.previous\n"
 			"	.set	pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -1708,14 +1708,14 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"	j      9b\n"
 			"	.previous\n"
 			"	.section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
-			STR(PTR) " 5b,8b\n"
-			STR(PTR) " 6b,8b\n"
-			STR(PTR) " 7b,8b\n"
-			STR(PTR) " 0b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
+			STR(PTR_WD) " 5b,8b\n"
+			STR(PTR_WD) " 6b,8b\n"
+			STR(PTR_WD) " 7b,8b\n"
+			STR(PTR_WD) " 0b,8b\n"
 			"	.previous\n"
 			"	.set    pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -1827,14 +1827,14 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"	j	9b\n"
 			"	.previous\n"
 			"	.section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
-			STR(PTR) " 5b,8b\n"
-			STR(PTR) " 6b,8b\n"
-			STR(PTR) " 7b,8b\n"
-			STR(PTR) " 0b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
+			STR(PTR_WD) " 5b,8b\n"
+			STR(PTR_WD) " 6b,8b\n"
+			STR(PTR_WD) " 7b,8b\n"
+			STR(PTR_WD) " 0b,8b\n"
 			"	.previous\n"
 			"	.set	pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -1945,14 +1945,14 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"       j	9b\n"
 			"       .previous\n"
 			"       .section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,8b\n"
-			STR(PTR) " 2b,8b\n"
-			STR(PTR) " 3b,8b\n"
-			STR(PTR) " 4b,8b\n"
-			STR(PTR) " 5b,8b\n"
-			STR(PTR) " 6b,8b\n"
-			STR(PTR) " 7b,8b\n"
-			STR(PTR) " 0b,8b\n"
+			STR(PTR_WD) " 1b,8b\n"
+			STR(PTR_WD) " 2b,8b\n"
+			STR(PTR_WD) " 3b,8b\n"
+			STR(PTR_WD) " 4b,8b\n"
+			STR(PTR_WD) " 5b,8b\n"
+			STR(PTR_WD) " 6b,8b\n"
+			STR(PTR_WD) " 7b,8b\n"
+			STR(PTR_WD) " 0b,8b\n"
 			"       .previous\n"
 			"       .set	pop\n"
 			: "+&r"(rt), "=&r"(rs),
@@ -2007,7 +2007,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"j	2b\n"
 			".previous\n"
 			".section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,3b\n"
+			STR(PTR_WD) " 1b,3b\n"
 			".previous\n"
 			: "=&r"(res), "+&r"(err)
 			: "r"(vaddr), "i"(SIGSEGV)
@@ -2065,7 +2065,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"j	2b\n"
 			".previous\n"
 			".section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,3b\n"
+			STR(PTR_WD) " 1b,3b\n"
 			".previous\n"
 			: "+&r"(res), "+&r"(err)
 			: "r"(vaddr), "i"(SIGSEGV));
@@ -2126,7 +2126,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"j	2b\n"
 			".previous\n"
 			".section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,3b\n"
+			STR(PTR_WD) " 1b,3b\n"
 			".previous\n"
 			: "=&r"(res), "+&r"(err)
 			: "r"(vaddr), "i"(SIGSEGV)
@@ -2189,7 +2189,7 @@ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
 			"j	2b\n"
 			".previous\n"
 			".section        __ex_table,\"a\"\n"
-			STR(PTR) " 1b,3b\n"
+			STR(PTR_WD) " 1b,3b\n"
 			".previous\n"
 			: "+&r"(res), "+&r"(err)
 			: "r"(vaddr), "i"(SIGSEGV));
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
index cbf6db98cfb38..2748c55820c24 100644
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -23,14 +23,14 @@
 #define EX(a,b)							\
 9:	a,##b;							\
 	.section __ex_table,"a";				\
-	PTR	9b,fault;					\
+	PTR_WD	9b,fault;					\
 	.previous
 
 #define EX2(a,b)						\
 9:	a,##b;							\
 	.section __ex_table,"a";				\
-	PTR	9b,fault;					\
-	PTR	9b+4,fault;					\
+	PTR_WD	9b,fault;					\
+	PTR_WD	9b+4,fault;					\
 	.previous
 
 	.set	mips1
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index b91e911064756..2e687c60bc4f1 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -31,7 +31,7 @@
 .ex\@:	\insn	\reg, \src
 	.set	pop
 	.section __ex_table,"a"
-	PTR	.ex\@, fault
+	PTR_WD	.ex\@, fault
 	.previous
 	.endm
 
diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S
index f3c908abdbb80..cfde14b48fd8d 100644
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -147,10 +147,10 @@ LEAF(kexec_smp_wait)
 
 kexec_args:
 	EXPORT(kexec_args)
-arg0:	PTR		0x0
-arg1:	PTR		0x0
-arg2:	PTR		0x0
-arg3:	PTR		0x0
+arg0:	PTR_WD		0x0
+arg1:	PTR_WD		0x0
+arg2:	PTR_WD		0x0
+arg3:	PTR_WD		0x0
 	.size	kexec_args,PTRSIZE*4
 
 #ifdef CONFIG_SMP
@@ -161,10 +161,10 @@ arg3:	PTR		0x0
  */
 secondary_kexec_args:
 	EXPORT(secondary_kexec_args)
-s_arg0: PTR		0x0
-s_arg1: PTR		0x0
-s_arg2: PTR		0x0
-s_arg3: PTR		0x0
+s_arg0: PTR_WD		0x0
+s_arg1: PTR_WD		0x0
+s_arg2: PTR_WD		0x0
+s_arg3: PTR_WD		0x0
 	.size	secondary_kexec_args,PTRSIZE*4
 kexec_flag:
 	LONG		0x1
@@ -173,17 +173,17 @@ kexec_flag:
 
 kexec_start_address:
 	EXPORT(kexec_start_address)
-	PTR		0x0
+	PTR_WD		0x0
 	.size		kexec_start_address, PTRSIZE
 
 kexec_indirection_page:
 	EXPORT(kexec_indirection_page)
-	PTR		0
+	PTR_WD		0
 	.size		kexec_indirection_page, PTRSIZE
 
 relocate_new_kernel_end:
 
 relocate_new_kernel_size:
 	EXPORT(relocate_new_kernel_size)
-	PTR		relocate_new_kernel_end - relocate_new_kernel
+	PTR_WD		relocate_new_kernel_end - relocate_new_kernel
 	.size		relocate_new_kernel_size, PTRSIZE
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index b1b2e106f7118..9bfce5f75f601 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -72,10 +72,10 @@ loads_done:
 	.set	pop
 
 	.section __ex_table,"a"
-	PTR	load_a4, bad_stack_a4
-	PTR	load_a5, bad_stack_a5
-	PTR	load_a6, bad_stack_a6
-	PTR	load_a7, bad_stack_a7
+	PTR_WD	load_a4, bad_stack_a4
+	PTR_WD	load_a5, bad_stack_a5
+	PTR_WD	load_a6, bad_stack_a6
+	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
@@ -216,7 +216,7 @@ einval: li	v0, -ENOSYS
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
 #define __SYSCALL_WITH_COMPAT(nr, native, compat)	__SYSCALL(nr, native)
-#define __SYSCALL(nr, entry) 	PTR entry
+#define __SYSCALL(nr, entry) 	PTR_WD entry
 	.align	2
 	.type	sys_call_table, @object
 EXPORT(sys_call_table)
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index f650c55a17dc5..97456b2ca7dc3 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -101,7 +101,7 @@ not_n32_scall:
 
 	END(handle_sysn32)
 
-#define __SYSCALL(nr, entry)	PTR entry
+#define __SYSCALL(nr, entry)	PTR_WD entry
 	.type	sysn32_call_table, @object
 EXPORT(sysn32_call_table)
 #include <asm/syscall_table_n32.h>
diff --git a/arch/mips/kernel/scall64-n64.S b/arch/mips/kernel/scall64-n64.S
index 5d7bfc65e4d0b..5f6ed4b4c3993 100644
--- a/arch/mips/kernel/scall64-n64.S
+++ b/arch/mips/kernel/scall64-n64.S
@@ -109,7 +109,7 @@ illegal_syscall:
 	j	n64_syscall_exit
 	END(handle_sys64)
 
-#define __SYSCALL(nr, entry)	PTR entry
+#define __SYSCALL(nr, entry)	PTR_WD entry
 	.align	3
 	.type	sys_call_table, @object
 EXPORT(sys_call_table)
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index cedc8bd888046..d3c2616cba226 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -73,10 +73,10 @@ load_a7: lw	a7, 28(t0)		# argument #8 from usp
 loads_done:
 
 	.section __ex_table,"a"
-	PTR	load_a4, bad_stack_a4
-	PTR	load_a5, bad_stack_a5
-	PTR	load_a6, bad_stack_a6
-	PTR	load_a7, bad_stack_a7
+	PTR_WD	load_a4, bad_stack_a4
+	PTR_WD	load_a5, bad_stack_a5
+	PTR_WD	load_a6, bad_stack_a6
+	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
@@ -214,7 +214,7 @@ einval: li	v0, -ENOSYS
 	END(sys32_syscall)
 
 #define __SYSCALL_WITH_COMPAT(nr, native, compat)	__SYSCALL(nr, compat)
-#define __SYSCALL(nr, entry)	PTR entry
+#define __SYSCALL(nr, entry)	PTR_WD entry
 	.align	3
 	.type	sys32_call_table,@object
 EXPORT(sys32_call_table)
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 5512cd586e6e8..ae93a607ddf7e 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -122,8 +122,8 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new)
 		"	j	3b					\n"
 		"	.previous					\n"
 		"	.section __ex_table,\"a\"			\n"
-		"	"STR(PTR)"	1b, 4b				\n"
-		"	"STR(PTR)"	2b, 4b				\n"
+		"	"STR(PTR_WD)"	1b, 4b				\n"
+		"	"STR(PTR_WD)"	2b, 4b				\n"
 		"	.previous					\n"
 		"	.set	pop					\n"
 		: [old] "=&r" (old),
@@ -152,8 +152,8 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new)
 		"	j	3b					\n"
 		"	.previous					\n"
 		"	.section __ex_table,\"a\"			\n"
-		"	"STR(PTR)"	1b, 5b				\n"
-		"	"STR(PTR)"	2b, 5b				\n"
+		"	"STR(PTR_WD)"	1b, 5b				\n"
+		"	"STR(PTR_WD)"	2b, 5b				\n"
 		"	.previous					\n"
 		"	.set	pop					\n"
 		: [old] "=&r" (old),
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index a46db08071953..7767137c3e49a 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -347,7 +347,7 @@ EXPORT_SYMBOL(csum_partial)
 	.if \mode == LEGACY_MODE;		\
 9:		insn reg, addr;			\
 		.section __ex_table,"a";	\
-		PTR	9b, .L_exc;		\
+		PTR_WD	9b, .L_exc;		\
 		.previous;			\
 	/* This is enabled in EVA mode */	\
 	.else;					\
@@ -356,7 +356,7 @@ EXPORT_SYMBOL(csum_partial)
 		    ((\to == USEROP) && (type == ST_INSN));	\
 9:			__BUILD_EVA_INSN(insn##e, reg, addr);	\
 			.section __ex_table,"a";		\
-			PTR	9b, .L_exc;			\
+			PTR_WD	9b, .L_exc;			\
 			.previous;				\
 		.else;						\
 			/* EVA without exception */		\
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index 277c32296636d..18a43f2e29c81 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -116,7 +116,7 @@
 	.if \mode == LEGACY_MODE;				\
 9:		insn reg, addr;					\
 		.section __ex_table,"a";			\
-		PTR	9b, handler;				\
+		PTR_WD	9b, handler;				\
 		.previous;					\
 	/* This is assembled in EVA mode */			\
 	.else;							\
@@ -125,7 +125,7 @@
 		    ((\to == USEROP) && (type == ST_INSN));	\
 9:			__BUILD_EVA_INSN(insn##e, reg, addr);	\
 			.section __ex_table,"a";		\
-			PTR	9b, handler;			\
+			PTR_WD	9b, handler;			\
 			.previous;				\
 		.else;						\
 			/*					\
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index b0baa3c79fad0..0b342bae9a98c 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -52,7 +52,7 @@
 9:		___BUILD_EVA_INSN(insn, reg, addr);	\
 	.endif;						\
 	.section __ex_table,"a";			\
-	PTR	9b, handler;				\
+	PTR_WD	9b, handler;				\
 	.previous
 
 	.macro	f_fill64 dst, offset, val, fixup, mode
diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S
index 556acf684d7be..13aaa9927ad12 100644
--- a/arch/mips/lib/strncpy_user.S
+++ b/arch/mips/lib/strncpy_user.S
@@ -15,7 +15,7 @@
 #define EX(insn,reg,addr,handler)			\
 9:	insn	reg, addr;				\
 	.section __ex_table,"a";			\
-	PTR	9b, handler;				\
+	PTR_WD	9b, handler;				\
 	.previous
 
 /*
@@ -59,7 +59,7 @@ LEAF(__strncpy_from_user_asm)
 	jr		ra
 
 	.section	__ex_table,"a"
-	PTR		1b, .Lfault
+	PTR_WD		1b, .Lfault
 	.previous
 
 	EXPORT_SYMBOL(__strncpy_from_user_asm)
diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S
index 92b63f20ec05f..6de31b616f9c1 100644
--- a/arch/mips/lib/strnlen_user.S
+++ b/arch/mips/lib/strnlen_user.S
@@ -14,7 +14,7 @@
 #define EX(insn,reg,addr,handler)			\
 9:	insn	reg, addr;				\
 	.section __ex_table,"a";			\
-	PTR	9b, handler;				\
+	PTR_WD	9b, handler;				\
 	.previous
 
 /*
-- 
2.34.1

[PATCH 5.16 061/203] net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()

[Greg Kroah-Hartman]

From: Jisheng Zhang <jszhang@kernel.org>

[ Upstream commit 9e0db41e7a0b6f1271cbcfb16dbf5b8641b4e440 ]

When readl_poll_timeout() timeout, we'd better directly use its return
value.

Before this patch:
[    2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14

After this patch:
[    2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 617d0e4c64958..09644ab0d87a7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -756,7 +756,7 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv)
 
 	if (err) {
 		dev_err(priv->device, "EMAC reset timeout\n");
-		return -EFAULT;
+		return err;
 	}
 	return 0;
 }
-- 
2.34.1

[PATCH 5.16 062/203] arm64: errata: Add detection for TRBE ignored system register writes

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 607a9afaae09cde21ece458a8f10cb99d3f94f14 ]

TRBE implementations affected by Arm erratum #2064142 might fail to write
into certain system registers after the TRBE has been disabled. Under some
conditions after TRBE has been disabled, writes into certain TRBE registers
TRBLIMITR_EL1, TRBPTR_EL1, TRBBASER_EL1, TRBSR_EL1 and TRBTRG_EL1 will be
ignored and not be effected. This adds a new errata ARM64_ERRATUM_2064142
in arm64 errata framework.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  2 ++
 arch/arm64/Kconfig                     | 18 ++++++++++++++++++
 arch/arm64/kernel/cpu_errata.c         |  9 +++++++++
 arch/arm64/tools/cpucaps               |  1 +
 4 files changed, 30 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 8789c79310bbd..401a6e86c5084 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -52,6 +52,8 @@ stable kernels.
 | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index d8046c832225c..30c07b0d6b5c9 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -778,6 +778,24 @@ config ARM64_ERRATUM_2224489
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2064142
+	bool "Cortex-A510: 2064142: workaround TRBE register writes while disabled"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2064142.
+
+	  Affected Cortex-A510 core might fail to write into system registers after the
+	  TRBE has been disabled. Under some conditions after the TRBE has been disabled
+	  writes into TRBE registers TRBLIMITR_EL1, TRBPTR_EL1, TRBBASER_EL1, TRBSR_EL1,
+	  and TRBTRG_EL1 will be ignored and will not be effected.
+
+	  Work around this in the driver by executing TSB CSYNC and DSB after collection
+	  is stopped and before performing a system register write to one of the affected
+	  registers.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 29cc062a4153c..a5456dd9a33f5 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -599,6 +599,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
 		CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus),
 	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2064142
+	{
+		.desc = "ARM erratum 2064142",
+		.capability = ARM64_WORKAROUND_2064142,
+
+		/* Cortex-A510 r0p0 - r0p2 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
+	},
 #endif
 	{
 	}
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index 870c39537dd09..fca3cb329e1db 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -55,6 +55,7 @@ WORKAROUND_1418040
 WORKAROUND_1463225
 WORKAROUND_1508412
 WORKAROUND_1542419
+WORKAROUND_2064142
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
-- 
2.34.1

[PATCH 5.16 062/203] arm64: errata: Add detection for TRBE ignored system register writes

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 607a9afaae09cde21ece458a8f10cb99d3f94f14 ]

TRBE implementations affected by Arm erratum #2064142 might fail to write
into certain system registers after the TRBE has been disabled. Under some
conditions after TRBE has been disabled, writes into certain TRBE registers
TRBLIMITR_EL1, TRBPTR_EL1, TRBBASER_EL1, TRBSR_EL1 and TRBTRG_EL1 will be
ignored and not be effected. This adds a new errata ARM64_ERRATUM_2064142
in arm64 errata framework.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  2 ++
 arch/arm64/Kconfig                     | 18 ++++++++++++++++++
 arch/arm64/kernel/cpu_errata.c         |  9 +++++++++
 arch/arm64/tools/cpucaps               |  1 +
 4 files changed, 30 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 8789c79310bbd..401a6e86c5084 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -52,6 +52,8 @@ stable kernels.
 | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index d8046c832225c..30c07b0d6b5c9 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -778,6 +778,24 @@ config ARM64_ERRATUM_2224489
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2064142
+	bool "Cortex-A510: 2064142: workaround TRBE register writes while disabled"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2064142.
+
+	  Affected Cortex-A510 core might fail to write into system registers after the
+	  TRBE has been disabled. Under some conditions after the TRBE has been disabled
+	  writes into TRBE registers TRBLIMITR_EL1, TRBPTR_EL1, TRBBASER_EL1, TRBSR_EL1,
+	  and TRBTRG_EL1 will be ignored and will not be effected.
+
+	  Work around this in the driver by executing TSB CSYNC and DSB after collection
+	  is stopped and before performing a system register write to one of the affected
+	  registers.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 29cc062a4153c..a5456dd9a33f5 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -599,6 +599,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
 		CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus),
 	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2064142
+	{
+		.desc = "ARM erratum 2064142",
+		.capability = ARM64_WORKAROUND_2064142,
+
+		/* Cortex-A510 r0p0 - r0p2 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
+	},
 #endif
 	{
 	}
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index 870c39537dd09..fca3cb329e1db 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -55,6 +55,7 @@ WORKAROUND_1418040
 WORKAROUND_1463225
 WORKAROUND_1508412
 WORKAROUND_1542419
+WORKAROUND_2064142
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
-- 
2.34.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.16 063/203] arm64: errata: Add detection for TRBE invalid prohibited states

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 3bd94a8759de9b724b83a80942b0354acd7701eb ]

TRBE implementations affected by Arm erratum #2038923 might get TRBE into
an inconsistent view on whether trace is prohibited within the CPU. As a
result, the trace buffer or trace buffer state might be corrupted. This
happens after TRBE buffer has been enabled by setting TRBLIMITR_EL1.E,
followed by just a single context synchronization event before execution
changes from a context, in which trace is prohibited to one where it isn't,
or vice versa. In these mentioned conditions, the view of whether trace is
prohibited is inconsistent between parts of the CPU, and the trace buffer
or the trace buffer state might be corrupted. This adds a new errata
ARM64_ERRATUM_2038923 in arm64 errata framework.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  2 ++
 arch/arm64/Kconfig                     | 23 +++++++++++++++++++++++
 arch/arm64/kernel/cpu_errata.c         |  9 +++++++++
 arch/arm64/tools/cpucaps               |  1 +
 4 files changed, 35 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 401a6e86c5084..d5c6befc44eb8 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -54,6 +54,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2038923        | ARM64_ERRATUM_2038923       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 30c07b0d6b5c9..2b75e8a9bf88c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -796,6 +796,29 @@ config ARM64_ERRATUM_2064142
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2038923
+	bool "Cortex-A510: 2038923: workaround TRBE corruption with enable"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2038923.
+
+	  Affected Cortex-A510 core might cause an inconsistent view on whether trace is
+	  prohibited within the CPU. As a result, the trace buffer or trace buffer state
+	  might be corrupted. This happens after TRBE buffer has been enabled by setting
+	  TRBLIMITR_EL1.E, followed by just a single context synchronization event before
+	  execution changes from a context, in which trace is prohibited to one where it
+	  isn't, or vice versa. In these mentioned conditions, the view of whether trace
+	  is prohibited is inconsistent between parts of the CPU, and the trace buffer or
+	  the trace buffer state might be corrupted.
+
+	  Work around this in the driver by preventing an inconsistent view of whether the
+	  trace is prohibited or not based on TRBLIMITR_EL1.E by immediately following a
+	  change to TRBLIMITR_EL1.E with at least one ISB instruction before an ERET, or
+	  two ISB instructions if no ERET is to take place.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index a5456dd9a33f5..a64bf132c6336 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -609,6 +609,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_2038923
+	{
+		.desc = "ARM erratum 2038923",
+		.capability = ARM64_WORKAROUND_2038923,
+
+		/* Cortex-A510 r0p0 - r0p2 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
+	},
+#endif
 	{
 	}
 };
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index fca3cb329e1db..45a06d36d0807 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -56,6 +56,7 @@ WORKAROUND_1463225
 WORKAROUND_1508412
 WORKAROUND_1542419
 WORKAROUND_2064142
+WORKAROUND_2038923
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
-- 
2.34.1

[PATCH 5.16 063/203] arm64: errata: Add detection for TRBE invalid prohibited states

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 3bd94a8759de9b724b83a80942b0354acd7701eb ]

TRBE implementations affected by Arm erratum #2038923 might get TRBE into
an inconsistent view on whether trace is prohibited within the CPU. As a
result, the trace buffer or trace buffer state might be corrupted. This
happens after TRBE buffer has been enabled by setting TRBLIMITR_EL1.E,
followed by just a single context synchronization event before execution
changes from a context, in which trace is prohibited to one where it isn't,
or vice versa. In these mentioned conditions, the view of whether trace is
prohibited is inconsistent between parts of the CPU, and the trace buffer
or the trace buffer state might be corrupted. This adds a new errata
ARM64_ERRATUM_2038923 in arm64 errata framework.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  2 ++
 arch/arm64/Kconfig                     | 23 +++++++++++++++++++++++
 arch/arm64/kernel/cpu_errata.c         |  9 +++++++++
 arch/arm64/tools/cpucaps               |  1 +
 4 files changed, 35 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 401a6e86c5084..d5c6befc44eb8 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -54,6 +54,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2038923        | ARM64_ERRATUM_2038923       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 30c07b0d6b5c9..2b75e8a9bf88c 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -796,6 +796,29 @@ config ARM64_ERRATUM_2064142
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2038923
+	bool "Cortex-A510: 2038923: workaround TRBE corruption with enable"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2038923.
+
+	  Affected Cortex-A510 core might cause an inconsistent view on whether trace is
+	  prohibited within the CPU. As a result, the trace buffer or trace buffer state
+	  might be corrupted. This happens after TRBE buffer has been enabled by setting
+	  TRBLIMITR_EL1.E, followed by just a single context synchronization event before
+	  execution changes from a context, in which trace is prohibited to one where it
+	  isn't, or vice versa. In these mentioned conditions, the view of whether trace
+	  is prohibited is inconsistent between parts of the CPU, and the trace buffer or
+	  the trace buffer state might be corrupted.
+
+	  Work around this in the driver by preventing an inconsistent view of whether the
+	  trace is prohibited or not based on TRBLIMITR_EL1.E by immediately following a
+	  change to TRBLIMITR_EL1.E with at least one ISB instruction before an ERET, or
+	  two ISB instructions if no ERET is to take place.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index a5456dd9a33f5..a64bf132c6336 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -609,6 +609,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_2038923
+	{
+		.desc = "ARM erratum 2038923",
+		.capability = ARM64_WORKAROUND_2038923,
+
+		/* Cortex-A510 r0p0 - r0p2 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
+	},
+#endif
 	{
 	}
 };
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index fca3cb329e1db..45a06d36d0807 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -56,6 +56,7 @@ WORKAROUND_1463225
 WORKAROUND_1508412
 WORKAROUND_1542419
 WORKAROUND_2064142
+WORKAROUND_2038923
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
-- 
2.34.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.16 064/203] arm64: errata: Add detection for TRBE trace data corruption

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 708e8af4924ec2fdd5b81fe09192c6bac2f86935 ]

TRBE implementations affected by Arm erratum #1902691 might corrupt trace
data or deadlock, when it's being written into the memory. So effectively
TRBE is broken and hence cannot be used to capture trace data. This adds
a new errata ARM64_ERRATUM_1902691 in arm64 errata framework.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-5-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  2 ++
 arch/arm64/Kconfig                     | 18 ++++++++++++++++++
 arch/arm64/kernel/cpu_errata.c         |  9 +++++++++
 arch/arm64/tools/cpucaps               |  1 +
 4 files changed, 30 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index d5c6befc44eb8..1b0e53ececda9 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -56,6 +56,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2038923        | ARM64_ERRATUM_2038923       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #1902691        | ARM64_ERRATUM_1902691       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 2b75e8a9bf88c..7d710589e1818 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -819,6 +819,24 @@ config ARM64_ERRATUM_2038923
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1902691
+	bool "Cortex-A510: 1902691: workaround TRBE trace corruption"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 1902691.
+
+	  Affected Cortex-A510 core might cause trace data corruption, when being written
+	  into the memory. Effectively TRBE is broken and hence cannot be used to capture
+	  trace data.
+
+	  Work around this problem in the driver by just preventing TRBE initialization on
+	  affected cpus. The firmware must have disabled the access to TRBE for the kernel
+	  on such implementations. This will cover the kernel for any firmware that doesn't
+	  do this already.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index a64bf132c6336..066098198c248 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -617,6 +617,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		/* Cortex-A510 r0p0 - r0p2 */
 		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
 	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1902691
+	{
+		.desc = "ARM erratum 1902691",
+		.capability = ARM64_WORKAROUND_1902691,
+
+		/* Cortex-A510 r0p0 - r0p1 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 1)
+	},
 #endif
 	{
 	}
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index 45a06d36d0807..e7719e8f18def 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -57,6 +57,7 @@ WORKAROUND_1508412
 WORKAROUND_1542419
 WORKAROUND_2064142
 WORKAROUND_2038923
+WORKAROUND_1902691
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
-- 
2.34.1

[PATCH 5.16 064/203] arm64: errata: Add detection for TRBE trace data corruption

[Greg Kroah-Hartman]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 708e8af4924ec2fdd5b81fe09192c6bac2f86935 ]

TRBE implementations affected by Arm erratum #1902691 might corrupt trace
data or deadlock, when it's being written into the memory. So effectively
TRBE is broken and hence cannot be used to capture trace data. This adds
a new errata ARM64_ERRATUM_1902691 in arm64 errata framework.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1643120437-14352-5-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  2 ++
 arch/arm64/Kconfig                     | 18 ++++++++++++++++++
 arch/arm64/kernel/cpu_errata.c         |  9 +++++++++
 arch/arm64/tools/cpucaps               |  1 +
 4 files changed, 30 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index d5c6befc44eb8..1b0e53ececda9 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -56,6 +56,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2038923        | ARM64_ERRATUM_2038923       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #1902691        | ARM64_ERRATUM_1902691       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 2b75e8a9bf88c..7d710589e1818 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -819,6 +819,24 @@ config ARM64_ERRATUM_2038923
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1902691
+	bool "Cortex-A510: 1902691: workaround TRBE trace corruption"
+	depends on COMPILE_TEST # Until the CoreSight TRBE driver changes are in
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 1902691.
+
+	  Affected Cortex-A510 core might cause trace data corruption, when being written
+	  into the memory. Effectively TRBE is broken and hence cannot be used to capture
+	  trace data.
+
+	  Work around this problem in the driver by just preventing TRBE initialization on
+	  affected cpus. The firmware must have disabled the access to TRBE for the kernel
+	  on such implementations. This will cover the kernel for any firmware that doesn't
+	  do this already.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index a64bf132c6336..066098198c248 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -617,6 +617,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		/* Cortex-A510 r0p0 - r0p2 */
 		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
 	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1902691
+	{
+		.desc = "ARM erratum 1902691",
+		.capability = ARM64_WORKAROUND_1902691,
+
+		/* Cortex-A510 r0p0 - r0p1 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 1)
+	},
 #endif
 	{
 	}
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index 45a06d36d0807..e7719e8f18def 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -57,6 +57,7 @@ WORKAROUND_1508412
 WORKAROUND_1542419
 WORKAROUND_2064142
 WORKAROUND_2038923
+WORKAROUND_1902691
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
-- 
2.34.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.16 065/203] arm64: cpufeature: List early Cortex-A510 parts as having broken dbm

[Greg Kroah-Hartman]

From: James Morse <james.morse@arm.com>

[ Upstream commit 297ae1eb23b04c5a46111ab53c8d0f69af43f402 ]

Versions of Cortex-A510 before r0p3 are affected by a hardware erratum
where the hardware update of the dirty bit is not correctly ordered.

Add these cpus to the cpu_has_broken_dbm list.

Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220125154040.549272-3-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst |  2 ++
 arch/arm64/Kconfig                     | 10 ++++++++++
 arch/arm64/kernel/cpufeature.c         |  3 +++
 3 files changed, 15 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 1b0e53ececda9..0ec7b7f1524b1 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -98,6 +98,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2051678        | ARM64_ERRATUM_2051678       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 7d710589e1818..38e7f19df14d4 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -670,6 +670,16 @@ config ARM64_ERRATUM_1508412
 config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 	bool
 
+config ARM64_ERRATUM_2051678
+	bool "Cortex-A510: 2051678: disable Hardware Update of the page table dirty bit"
+	help
+	  This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678.
+	  Affected Coretex-A510 might not respect the ordering rules for
+	  hardware update of the page table's dirty bit. The workaround
+	  is to not enable the feature on affected CPUs.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_2119858
 	bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode"
 	default y
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 6f3e677d88f15..d18b953c078db 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1634,6 +1634,9 @@ static bool cpu_has_broken_dbm(void)
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
 		/* Kryo4xx Silver (rdpe => r1p0) */
 		MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2051678
+		MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
 #endif
 		{},
 	};
-- 
2.34.1

[PATCH 5.16 066/203] kasan: test: fix compatibility with FORTIFY_SOURCE

[Greg Kroah-Hartman]

From: Marco Elver <elver@google.com>

[ Upstream commit 09c6304e38e440b93a9ebf3f3cf75cd6cb529f91 ]

With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks using __builtin_object_size(ptr), which when failed will
panic the kernel.

Because the KASAN test deliberately performs out-of-bounds operations,
the kernel panics with FORTIFY_SOURCE, for example:

 | kernel BUG at lib/string_helpers.c:910!
 | invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
 | CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G    B             5.16.0-rc3+ #3
 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 | RIP: 0010:fortify_panic+0x19/0x1b
 | ...
 | Call Trace:
 |  kmalloc_oob_in_memset.cold+0x16/0x16
 |  ...

Fix it by also hiding `ptr` from the optimizer, which will ensure that
__builtin_object_size() does not return a valid size, preventing
fortified string functions from panicking.

Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_kasan.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/lib/test_kasan.c b/lib/test_kasan.c
index 0643573f86862..2ef2948261bf8 100644
--- a/lib/test_kasan.c
+++ b/lib/test_kasan.c
@@ -492,6 +492,7 @@ static void kmalloc_oob_in_memset(struct kunit *test)
 	ptr = kmalloc(size, GFP_KERNEL);
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr);
 
+	OPTIMIZER_HIDE_VAR(ptr);
 	OPTIMIZER_HIDE_VAR(size);
 	KUNIT_EXPECT_KASAN_FAIL(test,
 				memset(ptr, 0, size + KASAN_GRANULE_SIZE));
@@ -515,6 +516,7 @@ static void kmalloc_memmove_negative_size(struct kunit *test)
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr);
 
 	memset((char *)ptr, 0, 64);
+	OPTIMIZER_HIDE_VAR(ptr);
 	OPTIMIZER_HIDE_VAR(invalid_size);
 	KUNIT_EXPECT_KASAN_FAIL(test,
 		memmove((char *)ptr, (char *)ptr + 4, invalid_size));
@@ -531,6 +533,7 @@ static void kmalloc_memmove_invalid_size(struct kunit *test)
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr);
 
 	memset((char *)ptr, 0, 64);
+	OPTIMIZER_HIDE_VAR(ptr);
 	KUNIT_EXPECT_KASAN_FAIL(test,
 		memmove((char *)ptr, (char *)ptr + 4, invalid_size));
 	kfree(ptr);
@@ -869,6 +872,7 @@ static void kasan_memchr(struct kunit *test)
 	ptr = kmalloc(size, GFP_KERNEL | __GFP_ZERO);
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr);
 
+	OPTIMIZER_HIDE_VAR(ptr);
 	OPTIMIZER_HIDE_VAR(size);
 	KUNIT_EXPECT_KASAN_FAIL(test,
 		kasan_ptr_result = memchr(ptr, '1', size + 1));
@@ -895,6 +899,7 @@ static void kasan_memcmp(struct kunit *test)
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ptr);
 	memset(arr, 0, sizeof(arr));
 
+	OPTIMIZER_HIDE_VAR(ptr);
 	OPTIMIZER_HIDE_VAR(size);
 	KUNIT_EXPECT_KASAN_FAIL(test,
 		kasan_int_result = memcmp(ptr, arr, size+1));
-- 
2.34.1

[PATCH 5.16 067/203] KVM: eventfd: Fix false positive RCU usage warning

[Greg Kroah-Hartman]

From: Hou Wenlong <houwenlong93@linux.alibaba.com>

[ Upstream commit 6a0c61703e3a5d67845a4b275e1d9d7bc1b5aad7 ]

Fix the following false positive warning:
 =============================
 WARNING: suspicious RCU usage
 5.16.0-rc4+ #57 Not tainted
 -----------------------------
 arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 3 locks held by fc_vcpu 0/330:
  #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm]
  #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm]
  #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm]

 stack backtrace:
 CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x44/0x57
  kvm_notify_acked_gsi+0x6b/0x70 [kvm]
  kvm_notify_acked_irq+0x8d/0x180 [kvm]
  kvm_ioapic_update_eoi+0x92/0x240 [kvm]
  kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm]
  handle_apic_eoi_induced+0x3d/0x60 [kvm_intel]
  vmx_handle_exit+0x19c/0x6a0 [kvm_intel]
  vcpu_enter_guest+0x66e/0x1860 [kvm]
  kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm]
  kvm_vcpu_ioctl+0x38a/0x6f0 [kvm]
  __x64_sys_ioctl+0x89/0xc0
  do_syscall_64+0x3a/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu),
kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact,
kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it
a false positive warning. So use hlist_for_each_entry_srcu() instead of
hlist_for_each_entry_rcu().

Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/eventfd.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index 2ad013b8bde96..59b1dd4a549ee 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -463,8 +463,8 @@ bool kvm_irq_has_notifier(struct kvm *kvm, unsigned irqchip, unsigned pin)
 	idx = srcu_read_lock(&kvm->irq_srcu);
 	gsi = kvm_irq_map_chip_pin(kvm, irqchip, pin);
 	if (gsi != -1)
-		hlist_for_each_entry_rcu(kian, &kvm->irq_ack_notifier_list,
-					 link)
+		hlist_for_each_entry_srcu(kian, &kvm->irq_ack_notifier_list,
+					  link, srcu_read_lock_held(&kvm->irq_srcu))
 			if (kian->gsi == gsi) {
 				srcu_read_unlock(&kvm->irq_srcu, idx);
 				return true;
@@ -480,8 +480,8 @@ void kvm_notify_acked_gsi(struct kvm *kvm, int gsi)
 {
 	struct kvm_irq_ack_notifier *kian;
 
-	hlist_for_each_entry_rcu(kian, &kvm->irq_ack_notifier_list,
-				 link)
+	hlist_for_each_entry_srcu(kian, &kvm->irq_ack_notifier_list,
+				  link, srcu_read_lock_held(&kvm->irq_srcu))
 		if (kian->gsi == gsi)
 			kian->irq_acked(kian);
 }
-- 
2.34.1

[PATCH 5.16 068/203] KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER

[Greg Kroah-Hartman]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 7a601e2cf61558dfd534a9ecaad09f5853ad8204 ]

Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field,
PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes
sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too.

Note, none of the currently existing Windows/Hyper-V versions are known
to enable 'save VMX-preemption timer value' when eVMCS is in use, the
change is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/evmcs.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
index 6255fa7167720..8d70f9aea94bc 100644
--- a/arch/x86/kvm/vmx/evmcs.h
+++ b/arch/x86/kvm/vmx/evmcs.h
@@ -59,7 +59,9 @@ DECLARE_STATIC_KEY_FALSE(enable_evmcs);
 	 SECONDARY_EXEC_SHADOW_VMCS |					\
 	 SECONDARY_EXEC_TSC_SCALING |					\
 	 SECONDARY_EXEC_PAUSE_LOOP_EXITING)
-#define EVMCS1_UNSUPPORTED_VMEXIT_CTRL (VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL)
+#define EVMCS1_UNSUPPORTED_VMEXIT_CTRL					\
+	(VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |				\
+	 VM_EXIT_SAVE_VMX_PREEMPTION_TIMER)
 #define EVMCS1_UNSUPPORTED_VMENTRY_CTRL (VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
 #define EVMCS1_UNSUPPORTED_VMFUNC (VMX_VMFUNC_EPTP_SWITCHING)
 
-- 
2.34.1

[PATCH 5.16 069/203] KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS

[Greg Kroah-Hartman]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit f80ae0ef089a09e8c18da43a382c3caac9a424a7 ]

Similar to MSR_IA32_VMX_EXIT_CTLS/MSR_IA32_VMX_TRUE_EXIT_CTLS,
MSR_IA32_VMX_ENTRY_CTLS/MSR_IA32_VMX_TRUE_ENTRY_CTLS pair,
MSR_IA32_VMX_TRUE_PINBASED_CTLS needs to be filtered the same way
MSR_IA32_VMX_PINBASED_CTLS is currently filtered as guests may solely rely
on 'true' MSR data.

Note, none of the currently existing Windows/Hyper-V versions are known
to stumble upon the unfiltered MSR_IA32_VMX_TRUE_PINBASED_CTLS, the change
is aimed at making the filtering future proof.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/evmcs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
index 09fac0ddac8bd..87e3dc10edf40 100644
--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@@ -361,6 +361,7 @@ void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata)
 	case MSR_IA32_VMX_PROCBASED_CTLS2:
 		ctl_high &= ~EVMCS1_UNSUPPORTED_2NDEXEC;
 		break;
+	case MSR_IA32_VMX_TRUE_PINBASED_CTLS:
 	case MSR_IA32_VMX_PINBASED_CTLS:
 		ctl_high &= ~EVMCS1_UNSUPPORTED_PINCTRL;
 		break;
-- 
2.34.1

[PATCH 5.16 070/203] KVM: SVM: Dont kill SEV guest if SMAP erratum triggers in usermode

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

[ Upstream commit cdf85e0c5dc766fc7fc779466280e454a6d04f87 ]

Inject a #GP instead of synthesizing triple fault to try to avoid killing
the guest if emulation of an SEV guest fails due to encountering the SMAP
erratum.  The injected #GP may still be fatal to the guest, e.g. if the
userspace process is providing critical functionality, but KVM should
make every attempt to keep the guest alive.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/svm/svm.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 3efada37272c0..d6a4acaa65742 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4530,7 +4530,21 @@ static bool svm_can_emulate_instruction(struct kvm_vcpu *vcpu, void *insn, int i
 	is_user = svm_get_cpl(vcpu) == 3;
 	if (smap && (!smep || is_user)) {
 		pr_err_ratelimited("KVM: SEV Guest triggered AMD Erratum 1096\n");
-		kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
+
+		/*
+		 * If the fault occurred in userspace, arbitrarily inject #GP
+		 * to avoid killing the guest and to hopefully avoid confusing
+		 * the guest kernel too much, e.g. injecting #PF would not be
+		 * coherent with respect to the guest's page tables.  Request
+		 * triple fault if the fault occurred in the kernel as there's
+		 * no fault that KVM can inject without confusing the guest.
+		 * In practice, the triple fault is moot as no sane SEV kernel
+		 * will execute from user memory while also running with SMAP=1.
+		 */
+		if (is_user)
+			kvm_inject_gp(vcpu, 0);
+		else
+			kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 	}
 
 	return false;
-- 
2.34.1

[PATCH 5.16 071/203] KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadow

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

[ Upstream commit b9bed78e2fa9571b7c983b20666efa0009030c71 ]

Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step
breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or
MOVSS blocking is active.  Setting the flag is necessary to make VM-Entry
consistency checks happy, as VMX has an invariant that if RFLAGS.TF is
set and STI/MOVSS blocking is true, then the previous instruction must
have been STI or MOV/POP, and therefore a single-step #DB must be pending
since the RFLAGS.TF cannot have been set by the previous instruction,
i.e. the one instruction delay after setting RFLAGS.TF must have already
expired.

Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately
when recording guest state as part of a VM-Exit, but #DB VM-Exits
intentionally do not treat the #DB as "guest state" as interception of
the #DB effectively makes the #DB host-owned, thus KVM needs to manually
set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest.

Note, although this bug can be triggered by guest userspace, doing so
requires IOPL=3, and guest userspace running with IOPL=3 has full access
to all I/O ports (from the guest's perspective) and can crash/reboot the
guest any number of ways.  IOPL=3 is required because STI blocking kicks
in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either
takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF.

MOVSS blocking can be initiated by userspace, but can be coincident with
a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is
executed in the MOVSS shadow.  MOV DR #GPs at CPL>0, thus MOVSS blocking
is problematic only for CPL0 (and only if the guest is crazy enough to
access a DR in a MOVSS shadow).  All other sources of #DBs are either
suppressed by MOVSS blocking (single-step, code fetch, data, and I/O),
are mutually exclusive with MOVSS blocking (T-bit task switch), or are
already handled by KVM (ICEBP, a.k.a. INT1).

This bug was originally found by running tests[1] created for XSA-308[2].
Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is
presumably why the Xen bug was deemed to be an exploitable DOS from guest
userspace.  KVM already handles ICEBP by skipping the ICEBP instruction
and thus clears MOVSS blocking as a side effect of its "emulation".

[1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html
[2] https://xenbits.xen.org/xsa/advisory-308.html

Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Alexander Graf <graf@amazon.de>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220120000624.655815-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/vmx.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 7f4e6f625abcf..fe4a36c984460 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -4811,8 +4811,33 @@ static int handle_exception_nmi(struct kvm_vcpu *vcpu)
 		dr6 = vmx_get_exit_qual(vcpu);
 		if (!(vcpu->guest_debug &
 		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
+			/*
+			 * If the #DB was due to ICEBP, a.k.a. INT1, skip the
+			 * instruction.  ICEBP generates a trap-like #DB, but
+			 * despite its interception control being tied to #DB,
+			 * is an instruction intercept, i.e. the VM-Exit occurs
+			 * on the ICEBP itself.  Note, skipping ICEBP also
+			 * clears STI and MOVSS blocking.
+			 *
+			 * For all other #DBs, set vmcs.PENDING_DBG_EXCEPTIONS.BS
+			 * if single-step is enabled in RFLAGS and STI or MOVSS
+			 * blocking is active, as the CPU doesn't set the bit
+			 * on VM-Exit due to #DB interception.  VM-Entry has a
+			 * consistency check that a single-step #DB is pending
+			 * in this scenario as the previous instruction cannot
+			 * have toggled RFLAGS.TF 0=>1 (because STI and POP/MOV
+			 * don't modify RFLAGS), therefore the one instruction
+			 * delay when activating single-step breakpoints must
+			 * have already expired.  Note, the CPU sets/clears BS
+			 * as appropriate for all other VM-Exits types.
+			 */
 			if (is_icebp(intr_info))
 				WARN_ON(!skip_emulated_instruction(vcpu));
+			else if ((vmx_get_rflags(vcpu) & X86_EFLAGS_TF) &&
+				 (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+				  (GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS)))
+				vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS,
+					    vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS) | DR6_BS);
 
 			kvm_queue_exception_p(vcpu, DB_VECTOR, dr6);
 			return 1;
-- 
2.34.1

[PATCH 5.16 072/203] KVM: x86: Report deprecated x87 features in supported CPUID

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit e3bcfda012edd3564e12551b212afbd2521a1f68 ]

CPUID.(EAX=7,ECX=0):EBX.FDP_EXCPTN_ONLY[bit 6] and
CPUID.(EAX=7,ECX=0):EBX.ZERO_FCS_FDS[bit 13] are "defeature"
bits. Unlike most of the other CPUID feature bits, these bits are
clear if the features are present and set if the features are not
present. These bits should be reported in KVM_GET_SUPPORTED_CPUID,
because if these bits are set on hardware, they cannot be cleared in
the guest CPUID. Doing so would claim guest support for a feature that
the hardware doesn't support and that can't be efficiently emulated.

Of course, any software (e.g WIN87EM.DLL) expecting these features to
be present likely predates these CPUID feature bits and therefore
doesn't know to check for them anyway.

Aaron Lewis added the corresponding X86_FEATURE macros in
commit cbb99c0f5887 ("x86/cpufeatures: Add FDP_EXCPTN_ONLY and
ZERO_FCS_FDS"), with the intention of reporting these bits in
KVM_GET_SUPPORTED_CPUID, but I was unable to find a proposed patch on
the kvm list.

Opportunistically reordered the CPUID_7_0_EBX capability bits from
least to most significant.

Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220204001348.2844660-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/cpuid.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index add8f58d686e3..bf18679757c70 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -532,12 +532,13 @@ void kvm_set_cpu_caps(void)
 	);
 
 	kvm_cpu_cap_mask(CPUID_7_0_EBX,
-		F(FSGSBASE) | F(SGX) | F(BMI1) | F(HLE) | F(AVX2) | F(SMEP) |
-		F(BMI2) | F(ERMS) | F(INVPCID) | F(RTM) | 0 /*MPX*/ | F(RDSEED) |
-		F(ADX) | F(SMAP) | F(AVX512IFMA) | F(AVX512F) | F(AVX512PF) |
-		F(AVX512ER) | F(AVX512CD) | F(CLFLUSHOPT) | F(CLWB) | F(AVX512DQ) |
-		F(SHA_NI) | F(AVX512BW) | F(AVX512VL) | 0 /*INTEL_PT*/
-	);
+		F(FSGSBASE) | F(SGX) | F(BMI1) | F(HLE) | F(AVX2) |
+		F(FDP_EXCPTN_ONLY) | F(SMEP) | F(BMI2) | F(ERMS) | F(INVPCID) |
+		F(RTM) | F(ZERO_FCS_FDS) | 0 /*MPX*/ | F(AVX512F) |
+		F(AVX512DQ) | F(RDSEED) | F(ADX) | F(SMAP) | F(AVX512IFMA) |
+		F(CLFLUSHOPT) | F(CLWB) | 0 /*INTEL_PT*/ | F(AVX512PF) |
+		F(AVX512ER) | F(AVX512CD) | F(SHA_NI) | F(AVX512BW) |
+		F(AVX512VL));
 
 	kvm_cpu_cap_mask(CPUID_7_ECX,
 		F(AVX512VBMI) | F(LA57) | F(PKU) | 0 /*OSPKE*/ | F(RDPID) |
-- 
2.34.1

[PATCH 5.16 073/203] riscv: fix build with binutils 2.38

[Greg Kroah-Hartman]

From: Aurelien Jarno <aurelien@aurel32.net>

commit 6df2a016c0c8a3d0933ef33dd192ea6606b115e3 upstream.

>From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:

  CC      arch/riscv/kernel/vdso/vgettimeofday.o
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages:
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
  <<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'

The fix is to specify those extensions explicitely in -march. However as
older binutils version do not support this, we first need to detect
that.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/Makefile |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -50,6 +50,12 @@ riscv-march-$(CONFIG_ARCH_RV32I)	:= rv32
 riscv-march-$(CONFIG_ARCH_RV64I)	:= rv64ima
 riscv-march-$(CONFIG_FPU)		:= $(riscv-march-y)fd
 riscv-march-$(CONFIG_RISCV_ISA_C)	:= $(riscv-march-y)c
+
+# Newer binutils versions default to ISA spec version 20191213 which moves some
+# instructions from the I extension to the Zicsr and Zifencei extensions.
+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
+riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei
+
 KBUILD_CFLAGS += -march=$(subst fd,,$(riscv-march-y))
 KBUILD_AFLAGS += -march=$(riscv-march-y)
 

[PATCH 5.16 074/203] riscv: Fix XIP_FIXUP_FLASH_OFFSET

[Greg Kroah-Hartman]

From: Myrtle Shah <gatecat@ds0.me>

commit 3c04d84508b54fcf524093b0d4a718680ed67f0f upstream.

There were several problems with the calculation. Not only was an 'and'
being computed into t1 but thrown away; but the 'and' itself would
cause problems if the granularity of the XIP physical address was less
than XIP_OFFSET - in my case I had the kernel image at 2MB in SPI flash.

Fixes: f9ace4ede49b ("riscv: remove .text section size limitation for XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Myrtle Shah <gatecat@ds0.me>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/kernel/head.S |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -21,14 +21,13 @@
 	add \reg, \reg, t0
 .endm
 .macro XIP_FIXUP_FLASH_OFFSET reg
-	la t1, __data_loc
-	li t0, XIP_OFFSET_MASK
-	and t1, t1, t0
-	li t1, XIP_OFFSET
-	sub t0, t0, t1
-	sub \reg, \reg, t0
+	la t0, __data_loc
+	REG_L t1, _xip_phys_offset
+	sub \reg, \reg, t1
+	add \reg, \reg, t0
 .endm
 _xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
+_xip_phys_offset: .dword CONFIG_XIP_PHYS_ADDR + XIP_OFFSET
 #else
 .macro XIP_FIXUP_OFFSET reg
 .endm

[PATCH 5.16 075/203] riscv: cpu-hotplug: clear cpu from numa map when teardown

[Greg Kroah-Hartman]

From: Pingfan Liu <kernelfans@gmail.com>

commit f40fe31c01445f31253b15bef2412b33ae31093b upstream.

There is numa_add_cpu() when cpus online, accordingly, there should be
numa_remove_cpu() when cpus offline.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Cc: stable@vger.kernel.org
[Palmer: Add missing NUMA include]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/kernel/cpu-hotplug.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -12,6 +12,7 @@
 #include <linux/sched/hotplug.h>
 #include <asm/irq.h>
 #include <asm/cpu_ops.h>
+#include <asm/numa.h>
 #include <asm/sbi.h>
 
 void cpu_stop(void);
@@ -46,6 +47,7 @@ int __cpu_disable(void)
 		return ret;
 
 	remove_cpu_topology(cpu);
+	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
 	irq_migrate_all_off_this_cpu();
 

[PATCH 5.16 076/203] riscv/mm: Add XIP_FIXUP for phys_ram_base

[Greg Kroah-Hartman]

From: Palmer Dabbelt <palmer@rivosinc.com>

commit 4b1c70aa8ed8249608bb991380cb8ff423edf49e upstream.

This manifests as a crash early in boot on VexRiscv.

Signed-off-by: Myrtle Shah <gatecat@ds0.me>
[Palmer: split commit]
Fixes: 6d7f91d914bc ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/mm/init.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -41,6 +41,7 @@ phys_addr_t phys_ram_base __ro_after_ini
 EXPORT_SYMBOL(phys_ram_base);
 
 #ifdef CONFIG_XIP_KERNEL
+#define phys_ram_base  (*(phys_addr_t *)XIP_FIXUP(&phys_ram_base))
 extern char _xiprom[], _exiprom[], __data_loc;
 #endif
 

[PATCH 5.16 077/203] riscv: eliminate unreliable __builtin_frame_address(1)

[Greg Kroah-Hartman]

From: Changbin Du <changbin.du@gmail.com>

commit 6a00ef4493706a23120057fafbc62379bcde11ec upstream.

I tried different pieces of code which uses __builtin_frame_address(1)
(with both gcc version 7.5.0 and 10.3.0) to verify whether it works as
expected on riscv64. The result is negative.

What the compiler had generated is as below:
31                      fp = (unsigned long)__builtin_frame_address(1);
   0xffffffff80006024 <+200>:   ld      s1,0(s0)

It takes '0(s0)' as the address of frame 1 (caller), but the actual address
should be '-16(s0)'.

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
          | previous fp     |   |
          | saved registers |   |
          | local variables |   |
  $fp --> |       ...       |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This leads the kernel can not dump the full stack trace on riscv.

[    7.222126][    T1] Call Trace:
[    7.222804][    T1] [<ffffffff80006058>] dump_backtrace+0x2c/0x3a

This problem is not exposed on most riscv builds just because the '0(s0)'
occasionally is the address frame 2 (caller's caller), if only ra and fp
are stored in frame 1 (caller).

          |       ...       | <-+
          +-----------------+   |
          | return address  |   |
  $fp --> | previous fp     |   |
          +-----------------+   |
          | return address  |   |
          | previous fp --------+
          | saved registers |
  $sp --> | local variables |
          +-----------------+

This could be a *bug* of gcc that should be fixed. But as noted in gcc
manual "Calling this function with a nonzero argument can have
unpredictable effects, including crashing the calling program.", let's
remove the '__builtin_frame_address(1)' in backtrace code.

With this fix now it can show full stack trace:
[   10.444838][    T1] Call Trace:
[   10.446199][    T1] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[   10.447711][    T1] [<ffffffff800060ac>] show_stack+0x32/0x3e
[   10.448710][    T1] [<ffffffff80a005c0>] dump_stack_lvl+0x58/0x7a
[   10.449941][    T1] [<ffffffff80a005f6>] dump_stack+0x14/0x1c
[   10.450929][    T1] [<ffffffff804c04ee>] ubsan_epilogue+0x10/0x5a
[   10.451869][    T1] [<ffffffff804c092e>] __ubsan_handle_load_invalid_value+0x6c/0x78
[   10.453049][    T1] [<ffffffff8018f834>] __pagevec_release+0x62/0x64
[   10.455476][    T1] [<ffffffff80190830>] truncate_inode_pages_range+0x132/0x5be
[   10.456798][    T1] [<ffffffff80190ce0>] truncate_inode_pages+0x24/0x30
[   10.457853][    T1] [<ffffffff8045bb04>] kill_bdev+0x32/0x3c
...

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: eac2f3059e02 ("riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/kernel/stacktrace.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -22,15 +22,16 @@ void notrace walk_stackframe(struct task
 			     bool (*fn)(void *, unsigned long), void *arg)
 {
 	unsigned long fp, sp, pc;
+	int level = 0;
 
 	if (regs) {
 		fp = frame_pointer(regs);
 		sp = user_stack_pointer(regs);
 		pc = instruction_pointer(regs);
 	} else if (task == NULL || task == current) {
-		fp = (unsigned long)__builtin_frame_address(1);
-		sp = (unsigned long)__builtin_frame_address(0);
-		pc = (unsigned long)__builtin_return_address(0);
+		fp = (unsigned long)__builtin_frame_address(0);
+		sp = sp_in_global;
+		pc = (unsigned long)walk_stackframe;
 	} else {
 		/* task blocked in __switch_to */
 		fp = task->thread.s[0];
@@ -42,7 +43,7 @@ void notrace walk_stackframe(struct task
 		unsigned long low, high;
 		struct stackframe *frame;
 
-		if (unlikely(!__kernel_text_address(pc) || !fn(arg, pc)))
+		if (unlikely(!__kernel_text_address(pc) || (level++ >= 1 && !fn(arg, pc))))
 			break;
 
 		/* Validate frame pointer */

[PATCH 5.16 078/203] gfs2: Fix gfs2_release for non-writers regression

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

commit d3add1a9519dcacd6e644ecac741c56cf18b67f5 upstream.

When a file is opened for writing, the vfs code (do_dentry_open)
calls get_write_access for the inode, thus incrementing the inode's write
count. That writer normally then creates a multi-block reservation for
the inode (i_res) that can be re-used by other writers, which speeds up
writes for applications that stupidly loop on open/write/close.
When the writes are all done, the multi-block reservation should be
deleted when the file is closed by the last "writer."

Commit 0ec9b9ea4f83 broke that concept when it moved the call to
gfs2_rs_delete before the check for FMODE_WRITE.  Non-writers have no
business removing the multi-block reservations of writers. In fact, if
someone opens and closes the file for RO while a writer has a
multi-block reservation, the RO closer will delete the reservation
midway through the write, and this results in:

kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is:
BUG_ON(rs->rs_requested); from function gfs2_rs_deltree.

This patch moves the check back inside the check for FMODE_WRITE.

Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/gfs2/file.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -704,10 +704,11 @@ static int gfs2_release(struct inode *in
 	kfree(file->private_data);
 	file->private_data = NULL;
 
-	if (gfs2_rs_active(&ip->i_res))
-		gfs2_rs_delete(ip, &inode->i_writecount);
-	if (file->f_mode & FMODE_WRITE)
+	if (file->f_mode & FMODE_WRITE) {
+		if (gfs2_rs_active(&ip->i_res))
+			gfs2_rs_delete(ip, &inode->i_writecount);
 		gfs2_qa_put(ip);
+	}
 	return 0;
 }
 

[PATCH 5.16 079/203] Revert "gfs2: check context in gfs2_glock_put"

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

commit 356b8103d4c495d5440e3e687db9026ec2b76043 upstream.

It turns out that the might_sleep() call that commit 660a6126f8c3 adds
is triggering occasional data corruption in testing.  We're not sure
about the root cause yet, but since this commit was added as a debugging
aid only, revert it for now.

This reverts commit 660a6126f8c3208f6df8d552039cda078a8426d1.

Fixes: 660a6126f8c3 ("gfs2: check context in gfs2_glock_put")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/gfs2/glock.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -301,9 +301,6 @@ void gfs2_glock_queue_put(struct gfs2_gl
 
 void gfs2_glock_put(struct gfs2_glock *gl)
 {
-	/* last put could call sleepable dlm api */
-	might_sleep();
-
 	if (lockref_put_or_lock(&gl->gl_lockref))
 		return;
 

[PATCH 5.16 080/203] Revert "PCI/portdrv: Do not setup up IRQs if there are no users"

[Greg Kroah-Hartman]

From: Bjorn Helgaas <bhelgaas@google.com>

commit 075b7d363c675ef7fa03918881caeca3458e2a96 upstream.

This reverts commit 0e8ae5a6ff5952253cd7cc0260df838ab4c21009.

0e8ae5a6ff59 ("PCI/portdrv: Do not setup up IRQs if there are no users")
reduced usage of IRQs when we don't think we need them.  But Joey, Sergiu,
and David reported choppy GUI rendering, systems that became unresponsive
every few seconds, incorrect values reported by cpufreq, and high IRQ 16
CPU usage.

Joey bisected the issues to 0e8ae5a6ff59, so revert it until we figure out
a better solution.

Link: https://lore.kernel.org/r/20220210222717.GA658201@bhelgaas
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215533
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215546
Reported-by: Joey Corleone <joey.corleone@mail.ru>
Reported-by: Sergiu Deitsch <sergiu.deitsch@gmail.com>
Reported-by: David Spencer <dspencer577@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v5.16+
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pcie/portdrv_core.c |   47 ++++++++++++++--------------------------
 1 file changed, 17 insertions(+), 30 deletions(-)

--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -166,6 +166,9 @@ static int pcie_init_service_irqs(struct
 {
 	int ret, i;
 
+	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+		irqs[i] = -1;
+
 	/*
 	 * If we support PME but can't use MSI/MSI-X for it, we have to
 	 * fall back to INTx or other interrupts, e.g., a system shared
@@ -314,10 +317,8 @@ static int pcie_device_init(struct pci_d
  */
 int pcie_port_device_register(struct pci_dev *dev)
 {
-	int status, capabilities, irq_services, i, nr_service;
-	int irqs[PCIE_PORT_DEVICE_MAXSERVICES] = {
-		[0 ... PCIE_PORT_DEVICE_MAXSERVICES-1] = -1
-	};
+	int status, capabilities, i, nr_service;
+	int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
 
 	/* Enable PCI Express port device */
 	status = pci_enable_device(dev);
@@ -330,32 +331,18 @@ int pcie_port_device_register(struct pci
 		return 0;
 
 	pci_set_master(dev);
-
-	irq_services = 0;
-	if (IS_ENABLED(CONFIG_PCIE_PME))
-		irq_services |= PCIE_PORT_SERVICE_PME;
-	if (IS_ENABLED(CONFIG_PCIEAER))
-		irq_services |= PCIE_PORT_SERVICE_AER;
-	if (IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
-		irq_services |= PCIE_PORT_SERVICE_HP;
-	if (IS_ENABLED(CONFIG_PCIE_DPC))
-		irq_services |= PCIE_PORT_SERVICE_DPC;
-	irq_services &= capabilities;
-
-	if (irq_services) {
-		/*
-		 * Initialize service IRQs. Don't use service devices that
-		 * require interrupts if there is no way to generate them.
-		 * However, some drivers may have a polling mode (e.g.
-		 * pciehp_poll_mode) that can be used in the absence of IRQs.
-		 * Allow them to determine if that is to be used.
-		 */
-		status = pcie_init_service_irqs(dev, irqs, irq_services);
-		if (status) {
-			irq_services &= PCIE_PORT_SERVICE_HP;
-			if (!irq_services)
-				goto error_disable;
-		}
+	/*
+	 * Initialize service irqs. Don't use service devices that
+	 * require interrupts if there is no way to generate them.
+	 * However, some drivers may have a polling mode (e.g. pciehp_poll_mode)
+	 * that can be used in the absence of irqs.  Allow them to determine
+	 * if that is to be used.
+	 */
+	status = pcie_init_service_irqs(dev, irqs, capabilities);
+	if (status) {
+		capabilities &= PCIE_PORT_SERVICE_HP;
+		if (!capabilities)
+			goto error_disable;
 	}
 
 	/* Allocate child services if any */

[PATCH 5.16 081/203] ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

commit 42c9b28e6862d16db82a56f5667cf4d1f6658cf6 upstream.

Currently, SD card fails to mount due to the following pinctrl error:

[   11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi
[   11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22
[   11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0  on device 80018000.pinctrl
[   11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back

Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it
is already been used by the mmc0-pins-fixup pinctrl group.

With this change the rootfs can be mounted and the imx23-evk board can
boot successfully.

Cc: <stable@vger.kernel.org>
Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/imx23-evk.dts |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;

[PATCH 5.16 082/203] ARM: dts: Fix boot regression on Skomer

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

commit d9058d6a0e92d8e4a00855f8fe204792f42794db upstream.

The signal routing on the Skomer board was incorrect making
it impossible to mount root from the SD card. Fix this up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: Stefan Hansson <newbyte@disroot.org>
Link: https://lore.kernel.org/r/20220205235312.446730-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts |    4 ----
 1 file changed, 4 deletions(-)

--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -185,10 +185,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;

[PATCH 5.16 083/203] ARM: socfpga: fix missing RESET_CONTROLLER

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

commit 3037b174b1876aae6b2d1a27a878c681c78ccadc upstream.

The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly.  Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:

  /usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
  arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'

Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-socfpga/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_INTEL_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -18,6 +19,7 @@ menuconfig ARCH_INTEL_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_INTEL_SOCFPGA
 config SOCFPGA_SUSPEND

[PATCH 5.16 084/203] nvme-tcp: fix bogus request completion when failing to send AER

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

commit 63573807b27e0faf8065a28b1bbe1cbfb23c0130 upstream.

AER is not backed by a real request, hence we should not incorrectly
assume that when failing to send a nvme command, it is a normal request
but rather check if this is an aer and if so complete the aer (similar
to the normal completion path).

Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/tcp.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -913,7 +913,15 @@ static inline void nvme_tcp_done_send_re
 
 static void nvme_tcp_fail_request(struct nvme_tcp_request *req)
 {
-	nvme_tcp_end_request(blk_mq_rq_from_pdu(req), NVME_SC_HOST_PATH_ERROR);
+	if (nvme_tcp_async_req(req)) {
+		union nvme_result res = {};
+
+		nvme_complete_async_event(&req->queue->ctrl->ctrl,
+				cpu_to_le16(NVME_SC_HOST_PATH_ERROR), &res);
+	} else {
+		nvme_tcp_end_request(blk_mq_rq_from_pdu(req),
+				NVME_SC_HOST_PATH_ERROR);
+	}
 }
 
 static int nvme_tcp_try_send_data(struct nvme_tcp_request *req)

[PATCH 5.16 085/203] ACPI/IORT: Check node revision for PMCG resources

[Greg Kroah-Hartman]

From: Robin Murphy <robin.murphy@arm.com>

commit da5fb9e1ad3fbf632dce735f1bdad257ca528499 upstream.

The original version of the IORT PMCG definition had an oversight
wherein there was no way to describe the second register page for an
implementation using the recommended RELOC_CTRS feature. Although the
spec was fixed, and the final patches merged to ACPICA and Linux written
against the new version, it seems that some old firmware based on the
original revision has survived and turned up in the wild.

Add a check for the original PMCG definition, and avoid filling in the
second memory resource with nonsense if so. Otherwise it is likely that
something horrible will happen when the PMCG driver attempts to probe.

Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 24e516049360 ("ACPI/IORT: Add support for PMCG")
Cc: <stable@vger.kernel.org> # 5.2.x
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/75628ae41c257fb73588f7bf1c4459160e04be2b.1643916258.git.robin.murphy@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/arm64/iort.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1361,9 +1361,17 @@ static void __init arm_smmu_v3_pmcg_init
 	res[0].start = pmcg->page0_base_address;
 	res[0].end = pmcg->page0_base_address + SZ_4K - 1;
 	res[0].flags = IORESOURCE_MEM;
-	res[1].start = pmcg->page1_base_address;
-	res[1].end = pmcg->page1_base_address + SZ_4K - 1;
-	res[1].flags = IORESOURCE_MEM;
+	/*
+	 * The initial version in DEN0049C lacked a way to describe register
+	 * page 1, which makes it broken for most PMCG implementations; in
+	 * that case, just let the driver fail gracefully if it expects to
+	 * find a second memory resource.
+	 */
+	if (node->revision > 0) {
+		res[1].start = pmcg->page1_base_address;
+		res[1].end = pmcg->page1_base_address + SZ_4K - 1;
+		res[1].flags = IORESOURCE_MEM;
+	}
 
 	if (pmcg->overflow_gsiv)
 		acpi_iort_register_irq(pmcg->overflow_gsiv, "overflow",

[PATCH 5.16 086/203] PM: s2idle: ACPI: Fix wakeup interrupts handling

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit cb1f65c1e1424a4b5e4a86da8aa3b8fd8459c8ec upstream.

After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed.  Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.

The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop().  However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.

To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup.  Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one.  [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]

Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/sleep.c        |    1 +
 drivers/base/power/wakeup.c |   41 ++++++++++++++++++++++++++++++++++-------
 include/linux/suspend.h     |    4 ++--
 kernel/power/main.c         |    5 ++++-
 kernel/power/process.c      |    2 +-
 kernel/power/suspend.c      |    2 --
 6 files changed, 42 insertions(+), 13 deletions(-)

--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -767,6 +767,7 @@ bool acpi_s2idle_wake(void)
 			return true;
 		}
 
+		pm_wakeup_clear(acpi_sci_irq);
 		rearm_wake_irq(acpi_sci_irq);
 	}
 
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -34,7 +34,8 @@ suspend_state_t pm_suspend_target_state;
 bool events_check_enabled __read_mostly;
 
 /* First wakeup IRQ seen by the kernel in the last cycle. */
-unsigned int pm_wakeup_irq __read_mostly;
+static unsigned int wakeup_irq[2] __read_mostly;
+static DEFINE_RAW_SPINLOCK(wakeup_irq_lock);
 
 /* If greater than 0 and the system is suspending, terminate the suspend. */
 static atomic_t pm_abort_suspend __read_mostly;
@@ -942,19 +943,45 @@ void pm_system_cancel_wakeup(void)
 	atomic_dec_if_positive(&pm_abort_suspend);
 }
 
-void pm_wakeup_clear(bool reset)
+void pm_wakeup_clear(unsigned int irq_number)
 {
-	pm_wakeup_irq = 0;
-	if (reset)
+	raw_spin_lock_irq(&wakeup_irq_lock);
+
+	if (irq_number && wakeup_irq[0] == irq_number)
+		wakeup_irq[0] = wakeup_irq[1];
+	else
+		wakeup_irq[0] = 0;
+
+	wakeup_irq[1] = 0;
+
+	raw_spin_unlock_irq(&wakeup_irq_lock);
+
+	if (!irq_number)
 		atomic_set(&pm_abort_suspend, 0);
 }
 
 void pm_system_irq_wakeup(unsigned int irq_number)
 {
-	if (pm_wakeup_irq == 0) {
-		pm_wakeup_irq = irq_number;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&wakeup_irq_lock, flags);
+
+	if (wakeup_irq[0] == 0)
+		wakeup_irq[0] = irq_number;
+	else if (wakeup_irq[1] == 0)
+		wakeup_irq[1] = irq_number;
+	else
+		irq_number = 0;
+
+	raw_spin_unlock_irqrestore(&wakeup_irq_lock, flags);
+
+	if (irq_number)
 		pm_system_wakeup();
-	}
+}
+
+unsigned int pm_wakeup_irq(void)
+{
+	return wakeup_irq[0];
 }
 
 /**
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -496,14 +496,14 @@ extern void ksys_sync_helper(void);
 
 /* drivers/base/power/wakeup.c */
 extern bool events_check_enabled;
-extern unsigned int pm_wakeup_irq;
 extern suspend_state_t pm_suspend_target_state;
 
 extern bool pm_wakeup_pending(void);
 extern void pm_system_wakeup(void);
 extern void pm_system_cancel_wakeup(void);
-extern void pm_wakeup_clear(bool reset);
+extern void pm_wakeup_clear(unsigned int irq_number);
 extern void pm_system_irq_wakeup(unsigned int irq_number);
+extern unsigned int pm_wakeup_irq(void);
 extern bool pm_get_wakeup_count(unsigned int *count, bool block);
 extern bool pm_save_wakeup_count(unsigned int count);
 extern void pm_wakep_autosleep_enabled(bool set);
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -504,7 +504,10 @@ static ssize_t pm_wakeup_irq_show(struct
 					struct kobj_attribute *attr,
 					char *buf)
 {
-	return pm_wakeup_irq ? sprintf(buf, "%u\n", pm_wakeup_irq) : -ENODATA;
+	if (!pm_wakeup_irq())
+		return -ENODATA;
+
+	return sprintf(buf, "%u\n", pm_wakeup_irq());
 }
 
 power_attr_ro(pm_wakeup_irq);
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -134,7 +134,7 @@ int freeze_processes(void)
 	if (!pm_freezing)
 		atomic_inc(&system_freezing_cnt);
 
-	pm_wakeup_clear(true);
+	pm_wakeup_clear(0);
 	pr_info("Freezing user space processes ... ");
 	pm_freezing = true;
 	error = try_to_freeze_tasks(true);
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -136,8 +136,6 @@ static void s2idle_loop(void)
 			break;
 		}
 
-		pm_wakeup_clear(false);
-
 		s2idle_enter();
 	}
 

[PATCH 5.16 087/203] drm/amdgpu/display: change pipe policy for DCN 2.0

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

commit 6e7545ddb13416fd200e0b91c0acfd0404e2e27b upstream.

Fixes hangs on driver load with multiple displays on
DCN 2.0 parts.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215511
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1877
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1886
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -1069,7 +1069,7 @@ static const struct dc_debug_options deb
 		.timing_trace = false,
 		.clock_trace = true,
 		.disable_pplib_clock_request = true,
-		.pipe_split_policy = MPC_SPLIT_DYNAMIC,
+		.pipe_split_policy = MPC_SPLIT_AVOID_MULT_DISP,
 		.force_single_disp_pipe_split = false,
 		.disable_dcc = DCC_ENABLE,
 		.vsr_support = true,

[PATCH 5.16 088/203] drm/rockchip: vop: Correct RK3399 VOP register fields

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit 9da1e9ab82c92d0e89fe44cad2cd7c2d18d64070 upstream.

Commit 7707f7227f09 ("drm/rockchip: Add support for afbc") switched up
the rk3399_vop_big[] register windows, but it did so incorrectly.

The biggest problem is in rk3288_win23_data[] vs.
rk3368_win23_data[] .format field:

  RK3288's format: VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1)
  RK3368's format: VOP_REG(RK3368_WIN2_CTRL0, 0x3, 5)

Bits 5:6 (i.e., shift 5, mask 0x3) are correct for RK3399, according to
the TRM.

There are a few other small differences between the 3288 and 3368
definitions that were swapped in commit 7707f7227f09. I reviewed them to
the best of my ability according to the RK3399 TRM and fixed them up.

This fixes IOMMU issues (and display errors) when testing with BG24
color formats.

Fixes: 7707f7227f09 ("drm/rockchip: Add support for afbc")
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119161104.1.I1d01436bef35165a8cdfe9308789c0badb5ff46a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -902,6 +902,7 @@ static const struct vop_win_phy rk3399_w
 	.enable = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 0),
 	.format = VOP_REG(RK3288_WIN0_CTRL0, 0x7, 1),
 	.rb_swap = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 12),
+	.x_mir_en = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 21),
 	.y_mir_en = VOP_REG(RK3288_WIN0_CTRL0, 0x1, 22),
 	.act_info = VOP_REG(RK3288_WIN0_ACT_INFO, 0x1fff1fff, 0),
 	.dsp_info = VOP_REG(RK3288_WIN0_DSP_INFO, 0x0fff0fff, 0),
@@ -912,6 +913,7 @@ static const struct vop_win_phy rk3399_w
 	.uv_vir = VOP_REG(RK3288_WIN0_VIR, 0x3fff, 16),
 	.src_alpha_ctl = VOP_REG(RK3288_WIN0_SRC_ALPHA_CTRL, 0xff, 0),
 	.dst_alpha_ctl = VOP_REG(RK3288_WIN0_DST_ALPHA_CTRL, 0xff, 0),
+	.channel = VOP_REG(RK3288_WIN0_CTRL2, 0xff, 0),
 };
 
 /*
@@ -922,11 +924,11 @@ static const struct vop_win_phy rk3399_w
 static const struct vop_win_data rk3399_vop_win_data[] = {
 	{ .base = 0x00, .phy = &rk3399_win01_data,
 	  .type = DRM_PLANE_TYPE_PRIMARY },
-	{ .base = 0x40, .phy = &rk3288_win01_data,
+	{ .base = 0x40, .phy = &rk3368_win01_data,
 	  .type = DRM_PLANE_TYPE_OVERLAY },
-	{ .base = 0x00, .phy = &rk3288_win23_data,
+	{ .base = 0x00, .phy = &rk3368_win23_data,
 	  .type = DRM_PLANE_TYPE_OVERLAY },
-	{ .base = 0x50, .phy = &rk3288_win23_data,
+	{ .base = 0x50, .phy = &rk3368_win23_data,
 	  .type = DRM_PLANE_TYPE_CURSOR },
 };
 

[PATCH 5.16 089/203] drm/i915: Disable DRRS on IVB/HSW port != A

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit ee59792c97176f12c1da31f29fc4c2aab187f06e upstream.

Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).

Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.

Stop initializing DRRS on ports where it cannot possibly work.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit f0d4ce59f4d48622044933054a0e0cefa91ba15e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_drrs.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/gpu/drm/i915/display/intel_drrs.c
+++ b/drivers/gpu/drm/i915/display/intel_drrs.c
@@ -405,6 +405,7 @@ intel_drrs_init(struct intel_connector *
 		struct drm_display_mode *fixed_mode)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	struct intel_encoder *encoder = connector->encoder;
 	struct drm_display_mode *downclock_mode = NULL;
 
 	INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_drrs_downclock_work);
@@ -416,6 +417,13 @@ intel_drrs_init(struct intel_connector *
 		return NULL;
 	}
 
+	if ((DISPLAY_VER(dev_priv) < 8 && !HAS_GMCH(dev_priv)) &&
+	    encoder->port != PORT_A) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "DRRS only supported on eDP port A\n");
+		return NULL;
+	}
+
 	if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
 		drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n");
 		return NULL;

[PATCH 5.16 090/203] drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit 8fd5a26e43859547790a7995494c952b708ab3b5 upstream.

Reintroduce the !join_mbus single pipe cases for adlp+.

Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.

This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.

Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit eef173954432fe0612acb63421a95deb41155cdc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/intel_pm.c |   66 +++++++++++++++++++++++++++-------------
 1 file changed, 46 insertions(+), 20 deletions(-)

--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4707,6 +4707,10 @@ static const struct dbuf_slice_conf_entr
 };
 
 static const struct dbuf_slice_conf_entry adlp_allowed_dbufs[] = {
+	/*
+	 * Keep the join_mbus cases first so check_mbus_joined()
+	 * will prefer them over the !join_mbus cases.
+	 */
 	{
 		.active_pipes = BIT(PIPE_A),
 		.dbuf_mask = {
@@ -4722,6 +4726,20 @@ static const struct dbuf_slice_conf_entr
 		.join_mbus = true,
 	},
 	{
+		.active_pipes = BIT(PIPE_A),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+		.join_mbus = false,
+	},
+	{
+		.active_pipes = BIT(PIPE_B),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+		.join_mbus = false,
+	},
+	{
 		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
 		.dbuf_mask = {
 			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
@@ -4837,13 +4855,14 @@ static bool adlp_check_mbus_joined(u8 ac
 	return check_mbus_joined(active_pipes, adlp_allowed_dbufs);
 }
 
-static u8 compute_dbuf_slices(enum pipe pipe, u8 active_pipes,
+static u8 compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus,
 			      const struct dbuf_slice_conf_entry *dbuf_slices)
 {
 	int i;
 
 	for (i = 0; i < dbuf_slices[i].active_pipes; i++) {
-		if (dbuf_slices[i].active_pipes == active_pipes)
+		if (dbuf_slices[i].active_pipes == active_pipes &&
+		    dbuf_slices[i].join_mbus == join_mbus)
 			return dbuf_slices[i].dbuf_mask[pipe];
 	}
 	return 0;
@@ -4854,7 +4873,7 @@ static u8 compute_dbuf_slices(enum pipe
  * returns correspondent DBuf slice mask as stated in BSpec for particular
  * platform.
  */
-static u8 icl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes)
+static u8 icl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
 {
 	/*
 	 * FIXME: For ICL this is still a bit unclear as prev BSpec revision
@@ -4868,37 +4887,41 @@ static u8 icl_compute_dbuf_slices(enum p
 	 * still here - we will need it once those additional constraints
 	 * pop up.
 	 */
-	return compute_dbuf_slices(pipe, active_pipes, icl_allowed_dbufs);
+	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
+				   icl_allowed_dbufs);
 }
 
-static u8 tgl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes)
+static u8 tgl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
 {
-	return compute_dbuf_slices(pipe, active_pipes, tgl_allowed_dbufs);
+	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
+				   tgl_allowed_dbufs);
 }
 
-static u32 adlp_compute_dbuf_slices(enum pipe pipe, u32 active_pipes)
+static u8 adlp_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
 {
-	return compute_dbuf_slices(pipe, active_pipes, adlp_allowed_dbufs);
+	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
+				   adlp_allowed_dbufs);
 }
 
-static u32 dg2_compute_dbuf_slices(enum pipe pipe, u32 active_pipes)
+static u8 dg2_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus)
 {
-	return compute_dbuf_slices(pipe, active_pipes, dg2_allowed_dbufs);
+	return compute_dbuf_slices(pipe, active_pipes, join_mbus,
+				   dg2_allowed_dbufs);
 }
 
-static u8 skl_compute_dbuf_slices(struct intel_crtc *crtc, u8 active_pipes)
+static u8 skl_compute_dbuf_slices(struct intel_crtc *crtc, u8 active_pipes, bool join_mbus)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum pipe pipe = crtc->pipe;
 
 	if (IS_DG2(dev_priv))
-		return dg2_compute_dbuf_slices(pipe, active_pipes);
+		return dg2_compute_dbuf_slices(pipe, active_pipes, join_mbus);
 	else if (IS_ALDERLAKE_P(dev_priv))
-		return adlp_compute_dbuf_slices(pipe, active_pipes);
+		return adlp_compute_dbuf_slices(pipe, active_pipes, join_mbus);
 	else if (DISPLAY_VER(dev_priv) == 12)
-		return tgl_compute_dbuf_slices(pipe, active_pipes);
+		return tgl_compute_dbuf_slices(pipe, active_pipes, join_mbus);
 	else if (DISPLAY_VER(dev_priv) == 11)
-		return icl_compute_dbuf_slices(pipe, active_pipes);
+		return icl_compute_dbuf_slices(pipe, active_pipes, join_mbus);
 	/*
 	 * For anything else just return one slice yet.
 	 * Should be extended for other platforms.
@@ -6109,11 +6132,16 @@ skl_compute_ddb(struct intel_atomic_stat
 			return ret;
 	}
 
+	if (IS_ALDERLAKE_P(dev_priv))
+		new_dbuf_state->joined_mbus =
+			adlp_check_mbus_joined(new_dbuf_state->active_pipes);
+
 	for_each_intel_crtc(&dev_priv->drm, crtc) {
 		enum pipe pipe = crtc->pipe;
 
 		new_dbuf_state->slices[pipe] =
-			skl_compute_dbuf_slices(crtc, new_dbuf_state->active_pipes);
+			skl_compute_dbuf_slices(crtc, new_dbuf_state->active_pipes,
+						new_dbuf_state->joined_mbus);
 
 		if (old_dbuf_state->slices[pipe] == new_dbuf_state->slices[pipe])
 			continue;
@@ -6125,9 +6153,6 @@ skl_compute_ddb(struct intel_atomic_stat
 
 	new_dbuf_state->enabled_slices = intel_dbuf_enabled_slices(new_dbuf_state);
 
-	if (IS_ALDERLAKE_P(dev_priv))
-		new_dbuf_state->joined_mbus = adlp_check_mbus_joined(new_dbuf_state->active_pipes);
-
 	if (old_dbuf_state->enabled_slices != new_dbuf_state->enabled_slices ||
 	    old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
 		ret = intel_atomic_serialize_global_state(&new_dbuf_state->base);
@@ -6628,7 +6653,8 @@ void skl_wm_get_hw_state(struct drm_i915
 		}
 
 		dbuf_state->slices[pipe] =
-			skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes);
+			skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes,
+						dbuf_state->joined_mbus);
 
 		dbuf_state->weight[pipe] = intel_crtc_ddb_weight(crtc_state);
 

[PATCH 5.16 091/203] drm/i915: Populate pipe dbuf slices more accurately during readout

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit 85bb289215cf37e05e9581b39b114db1293f9ecd upstream.

During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.

Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b3dcc6dc0f32612d04839c2fb32e94d0ebf92c98)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/intel_pm.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6633,6 +6633,7 @@ void skl_wm_get_hw_state(struct drm_i915
 		enum pipe pipe = crtc->pipe;
 		unsigned int mbus_offset;
 		enum plane_id plane_id;
+		u8 slices;
 
 		skl_pipe_wm_get_hw_state(crtc, &crtc_state->wm.skl.optimal);
 		crtc_state->wm.skl.raw = crtc_state->wm.skl.optimal;
@@ -6652,20 +6653,22 @@ void skl_wm_get_hw_state(struct drm_i915
 			skl_ddb_entry_union(&dbuf_state->ddb[pipe], ddb_uv);
 		}
 
-		dbuf_state->slices[pipe] =
-			skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes,
-						dbuf_state->joined_mbus);
-
 		dbuf_state->weight[pipe] = intel_crtc_ddb_weight(crtc_state);
 
 		/*
 		 * Used for checking overlaps, so we need absolute
 		 * offsets instead of MBUS relative offsets.
 		 */
-		mbus_offset = mbus_ddb_offset(dev_priv, dbuf_state->slices[pipe]);
+		slices = skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes,
+						 dbuf_state->joined_mbus);
+		mbus_offset = mbus_ddb_offset(dev_priv, slices);
 		crtc_state->wm.skl.ddb.start = mbus_offset + dbuf_state->ddb[pipe].start;
 		crtc_state->wm.skl.ddb.end = mbus_offset + dbuf_state->ddb[pipe].end;
 
+		/* The slices actually used by the planes on the pipe */
+		dbuf_state->slices[pipe] =
+			skl_ddb_dbuf_slice_mask(dev_priv, &crtc_state->wm.skl.ddb);
+
 		drm_dbg_kms(&dev_priv->drm,
 			    "[CRTC:%d:%s] dbuf slices 0x%x, ddb (%d - %d), active pipes 0x%x, mbus joined: %s\n",
 			    crtc->base.base.id, crtc->base.name,

[PATCH 5.16 092/203] drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit 4e6f55120c7eccf6f9323bb681632e23cbcb3f3c upstream.

On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.

We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.

And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.

Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 15512021eb3975a8c2366e3883337e252bb0eee5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_display.c |    1 
 drivers/gpu/drm/i915/intel_pm.c              |   68 +++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_pm.h              |    1 
 3 files changed, 70 insertions(+)

--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -11901,6 +11901,7 @@ intel_modeset_setup_hw_state(struct drm_
 		vlv_wm_sanitize(dev_priv);
 	} else if (DISPLAY_VER(dev_priv) >= 9) {
 		skl_wm_get_hw_state(dev_priv);
+		skl_wm_sanitize(dev_priv);
 	} else if (HAS_PCH_SPLIT(dev_priv)) {
 		ilk_wm_get_hw_state(dev_priv);
 	}
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6680,6 +6680,74 @@ void skl_wm_get_hw_state(struct drm_i915
 	dbuf_state->enabled_slices = dev_priv->dbuf.enabled_slices;
 }
 
+static bool skl_dbuf_is_misconfigured(struct drm_i915_private *i915)
+{
+	const struct intel_dbuf_state *dbuf_state =
+		to_intel_dbuf_state(i915->dbuf.obj.state);
+	struct skl_ddb_entry entries[I915_MAX_PIPES] = {};
+	struct intel_crtc *crtc;
+
+	for_each_intel_crtc(&i915->drm, crtc) {
+		const struct intel_crtc_state *crtc_state =
+			to_intel_crtc_state(crtc->base.state);
+
+		entries[crtc->pipe] = crtc_state->wm.skl.ddb;
+	}
+
+	for_each_intel_crtc(&i915->drm, crtc) {
+		const struct intel_crtc_state *crtc_state =
+			to_intel_crtc_state(crtc->base.state);
+		u8 slices;
+
+		slices = skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes,
+						 dbuf_state->joined_mbus);
+		if (dbuf_state->slices[crtc->pipe] & ~slices)
+			return true;
+
+		if (skl_ddb_allocation_overlaps(&crtc_state->wm.skl.ddb, entries,
+						I915_MAX_PIPES, crtc->pipe))
+			return true;
+	}
+
+	return false;
+}
+
+void skl_wm_sanitize(struct drm_i915_private *i915)
+{
+	struct intel_crtc *crtc;
+
+	/*
+	 * On TGL/RKL (at least) the BIOS likes to assign the planes
+	 * to the wrong DBUF slices. This will cause an infinite loop
+	 * in skl_commit_modeset_enables() as it can't find a way to
+	 * transition between the old bogus DBUF layout to the new
+	 * proper DBUF layout without DBUF allocation overlaps between
+	 * the planes (which cannot be allowed or else the hardware
+	 * may hang). If we detect a bogus DBUF layout just turn off
+	 * all the planes so that skl_commit_modeset_enables() can
+	 * simply ignore them.
+	 */
+	if (!skl_dbuf_is_misconfigured(i915))
+		return;
+
+	drm_dbg_kms(&i915->drm, "BIOS has misprogrammed the DBUF, disabling all planes\n");
+
+	for_each_intel_crtc(&i915->drm, crtc) {
+		struct intel_plane *plane = to_intel_plane(crtc->base.primary);
+		const struct intel_plane_state *plane_state =
+			to_intel_plane_state(plane->base.state);
+		struct intel_crtc_state *crtc_state =
+			to_intel_crtc_state(crtc->base.state);
+
+		if (plane_state->uapi.visible)
+			intel_plane_disable_noatomic(crtc, plane);
+
+		drm_WARN_ON(&i915->drm, crtc_state->active_planes != 0);
+
+		memset(&crtc_state->wm.skl.ddb, 0, sizeof(crtc_state->wm.skl.ddb));
+	}
+}
+
 static void ilk_pipe_wm_get_hw_state(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -47,6 +47,7 @@ void skl_pipe_wm_get_hw_state(struct int
 			      struct skl_pipe_wm *out);
 void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
 void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
+void skl_wm_sanitize(struct drm_i915_private *dev_priv);
 bool intel_can_enable_sagv(struct drm_i915_private *dev_priv,
 			   const struct intel_bw_state *bw_state);
 void intel_sagv_pre_plane_update(struct intel_atomic_state *state);

[PATCH 5.16 093/203] ARM: dts: Fix timer regression for beagleboard revision c

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ]

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.

Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.

Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.

Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/arm/omap/omap.txt     |  3 ++
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/omap3-beagle-ab4.dts        | 47 +++++++++++++++++++
 arch/arm/boot/dts/omap3-beagle.dts            | 33 -------------
 drivers/clocksource/timer-ti-dm-systimer.c    |  2 +-
 5 files changed, 52 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c6..fa8b31660cadd 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0de64f237cd87..a387ebe8919b1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -794,6 +794,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 0000000000000..990ff2d846868
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e91..0548b391334fd 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@ &usbhsehci {
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index b6f97960d8ee0..5c40ca1d4740e 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -241,7 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void)
 	bool quirk_unreliable_oscillator = false;
 
 	/* Quirk unreliable 32 KiHz oscillator with incomplete dts */
-	if (of_machine_is_compatible("ti,omap3-beagle") ||
+	if (of_machine_is_compatible("ti,omap3-beagle-ab4") ||
 	    of_machine_is_compatible("timll,omap3-devkit8000")) {
 		quirk_unreliable_oscillator = true;
 		counter_32k = -ENODEV;
-- 
2.34.1

[PATCH 5.16 094/203] ARM: dts: meson: Fix the UART compatible strings

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 5225e1b87432dcf0d0fc3440824b91d04c1d6cc1 ]

The dt-bindings for the UART controller only allow the following values
for Meson6 SoCs:
- "amlogic,meson6-uart", "amlogic,meson-ao-uart"
- "amlogic,meson6-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Fixes: ec9b59162fd831 ("ARM: dts: meson6: use stable UART bindings")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 3be7cba603d5a..26eaba3fa96f3 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -59,7 +59,7 @@ hwrng: rng@8100 {
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@ uart_A: serial@84c0 {
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@ saradc: adc@8680 {
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -228,7 +228,7 @@ ir_receiver: ir-receiver@480 {
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
-- 
2.34.1

[PATCH 5.16 095/203] ARM: dts: meson8: Fix the UART device-tree schema validation

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 57007bfb5469ba31cacf69d52195e8b75f43e32d ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml schema.

Fixes: 6ca77502050eff ("ARM: dts: meson8: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index f80ddc98d3a2b..9997a5d0333a3 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -736,27 +736,27 @@ &timer_abcde {
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
-- 
2.34.1

[PATCH 5.16 096/203] ARM: dts: meson8b: Fix the UART device-tree schema validation

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 3375aa77135f6aeb1107ed839a2050a4118444bc ]

The dt-bindings for the UART controller only allow the following values
for Meson8 SoCs:
- "amlogic,meson8b-uart", "amlogic,meson-ao-uart"
- "amlogic,meson8b-uart"

Use the correct fallback compatible string "amlogic,meson-ao-uart" for
AO UART. Drop the "amlogic,meson-uart" compatible string from the EE
domain UART controllers.

Also update the order of the clocks to match the order defined in the
yaml bindings.

Fixes: b02d6e73f5fc96 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211227180026.4068352-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index b49b7cbaed4ee..94f1c03deccef 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -724,27 +724,27 @@ &timer_abcde {
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
-- 
2.34.1

[PATCH 5.16 097/203] phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option

[Greg Kroah-Hartman]

From: Al Cooper <alcooperx@gmail.com>

[ Upstream commit 5070ce86246a8a4ebacd0c15b121e6b6325bc167 ]

The previous commit 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on
the BCM4908") added a second "default" line for ARCH_BCM_4908 above
the original "default" line for ARCH_BRCMSTB. When two "default"
lines are used, only the first is used and this change stopped
the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB.
The fix is to use one "default line with "||".

Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/broadcom/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index f81e237420799..849c4204f5506 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -97,8 +97,7 @@ config PHY_BRCM_USB
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908
-	default ARCH_BRCMSTB
+	default ARCH_BCM4908 || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI
-- 
2.34.1

[PATCH 5.16 098/203] tee: optee: do not check memref size on return from Secure World

[Greg Kroah-Hartman]

From: Jerome Forissier <jerome@forissier.org>

[ Upstream commit abc8dc34d1f6e34ed346c6e3fc554127e421b769 ]

Commit c650b8dc7a79 ("tee: optee: do not check memref size on return
from Secure World") was mistakenly lost in commit 4602c5842f64 ("optee:
refactor driver with internal callbacks"). Remove the unwanted code
again.

Fixes: 4602c5842f64 ("optee: refactor driver with internal callbacks")
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tee/optee/smc_abi.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
index cf2e3293567d9..09e7ec673bb6b 100644
--- a/drivers/tee/optee/smc_abi.c
+++ b/drivers/tee/optee/smc_abi.c
@@ -71,16 +71,6 @@ static int from_msg_param_tmp_mem(struct tee_param *p, u32 attr,
 	p->u.memref.shm_offs = mp->u.tmem.buf_ptr - pa;
 	p->u.memref.shm = shm;
 
-	/* Check that the memref is covered by the shm object */
-	if (p->u.memref.size) {
-		size_t o = p->u.memref.shm_offs +
-			   p->u.memref.size - 1;
-
-		rc = tee_shm_get_pa(shm, o, NULL);
-		if (rc)
-			return rc;
-	}
-
 	return 0;
 }
 
-- 
2.34.1

[PATCH 5.16 099/203] optee: add error checks in optee_ffa_do_call_with_arg()

[Greg Kroah-Hartman]

From: Jens Wiklander <jens.wiklander@linaro.org>

[ Upstream commit 4064c461148ab129dfe5eaeea129b4af6cf4b9b7 ]

Adds error checking in optee_ffa_do_call_with_arg() for correctness.

Fixes: 4615e5a34b95 ("optee: add FF-A support")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tee/optee/ffa_abi.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
index d8c8683863aa0..28d7c0eafc025 100644
--- a/drivers/tee/optee/ffa_abi.c
+++ b/drivers/tee/optee/ffa_abi.c
@@ -619,9 +619,18 @@ static int optee_ffa_do_call_with_arg(struct tee_context *ctx,
 		.data2 = (u32)(shm->sec_world_id >> 32),
 		.data3 = shm->offset,
 	};
-	struct optee_msg_arg *arg = tee_shm_get_va(shm, 0);
-	unsigned int rpc_arg_offs = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
-	struct optee_msg_arg *rpc_arg = tee_shm_get_va(shm, rpc_arg_offs);
+	struct optee_msg_arg *arg;
+	unsigned int rpc_arg_offs;
+	struct optee_msg_arg *rpc_arg;
+
+	arg = tee_shm_get_va(shm, 0);
+	if (IS_ERR(arg))
+		return PTR_ERR(arg);
+
+	rpc_arg_offs = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
+	rpc_arg = tee_shm_get_va(shm, rpc_arg_offs);
+	if (IS_ERR(rpc_arg))
+		return PTR_ERR(rpc_arg);
 
 	return optee_ffa_yielding_call(ctx, &data, rpc_arg);
 }
-- 
2.34.1

[PATCH 5.16 100/203] staging: fbtft: Fix error path in fbtft_driver_module_init()

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 426aca16e903b387a0b0001d62207a745c67cfd3 ]

If registering the platform driver fails, the function must not return
without undoing the spi driver registration first.

Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220118181338.207943-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fbtft/fbtft.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h
index 6869f3603b0e6..9a6c906820f22 100644
--- a/drivers/staging/fbtft/fbtft.h
+++ b/drivers/staging/fbtft/fbtft.h
@@ -334,7 +334,10 @@ static int __init fbtft_driver_module_init(void)                           \
 	ret = spi_register_driver(&fbtft_driver_spi_driver);               \
 	if (ret < 0)                                                       \
 		return ret;                                                \
-	return platform_driver_register(&fbtft_driver_platform_driver);    \
+	ret = platform_driver_register(&fbtft_driver_platform_driver);     \
+	if (ret < 0)                                                       \
+		spi_unregister_driver(&fbtft_driver_spi_driver);           \
+	return ret;                                                        \
 }                                                                          \
 									   \
 static void __exit fbtft_driver_module_exit(void)                          \
-- 
2.34.1

[PATCH 5.16 101/203] ARM: dts: imx6qdl-udoo: Properly describe the SD card detect

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 993d66140f8d1c1853a3b58b77b43b681eb64dee ]

GPIO7_IO00 is used as SD card detect.

Properly describe this in the devicetree.

Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-udoo.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d2..ccfa8e320be62 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@ &usbotg {
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
-- 
2.34.1

[PATCH 5.16 102/203] phy: xilinx: zynqmp: Fix bus width setting for SGMII

[Greg Kroah-Hartman]

From: Robert Hancock <robert.hancock@calian.com>

[ Upstream commit 37291f60d0822f191748c2a54ce63b0bc669020f ]

TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with
separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was
not preserving the existing register value for other lanes, so enabling
the PHY in SGMII mode on one lane zeroed out the settings for all other
lanes, causing other PS-GTR peripherals such as USB3 to malfunction.

Use xpsgtr_clr_set to only manipulate the desired bits in the register.

Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/xilinx/phy-zynqmp.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index f478d8a17115b..9be9535ad7ab7 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -134,7 +134,8 @@
 #define PROT_BUS_WIDTH_10		0x0
 #define PROT_BUS_WIDTH_20		0x1
 #define PROT_BUS_WIDTH_40		0x2
-#define PROT_BUS_WIDTH_SHIFT		2
+#define PROT_BUS_WIDTH_SHIFT(n)		((n) * 2)
+#define PROT_BUS_WIDTH_MASK(n)		GENMASK((n) * 2 + 1, (n) * 2)
 
 /* Number of GT lanes */
 #define NUM_LANES			4
@@ -445,12 +446,12 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
 static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
 {
 	struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+	u32 mask = PROT_BUS_WIDTH_MASK(gtr_phy->lane);
+	u32 val = PROT_BUS_WIDTH_10 << PROT_BUS_WIDTH_SHIFT(gtr_phy->lane);
 
 	/* Set SGMII protocol TX and RX bus width to 10 bits. */
-	xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
-		     PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
-	xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
-		     PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
+	xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val);
+	xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val);
 
 	xpsgtr_bypass_scrambler_8b10b(gtr_phy);
 }
-- 
2.34.1

[PATCH 5.16 103/203] phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit cfc826c88a79e22ba5d8001556eb2c7efd8a01b6 ]

This error path needs to decrement "usbphyc->n_pll_cons.counter" before
returning.

Fixes: 5b1af71280ab ("phy: stm32: rework PLL Lock detection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220112111724.GB3019@kili
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/st/phy-stm32-usbphyc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index e4f4a9be51320..1ecdc26689ce8 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -304,7 +304,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
 
 		ret = __stm32_usbphyc_pll_disable(usbphyc);
 		if (ret)
-			return ret;
+			goto dec_n_pll_cons;
 	}
 
 	ret = stm32_usbphyc_regulators_enable(usbphyc);
-- 
2.34.1

[PATCH 5.16 104/203] ARM: dts: imx7ulp: Fix assigned-clocks-parents typo

[Greg Kroah-Hartman]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 6d58c5e21a3fe355ce6d1808e96d02a610265218 ]

The correct property name is 'assigned-clock-parents', not
'assigned-clocks-parents'. Though if the platform works with the typo, one
has to wonder if the property is even needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Fixes: 8b8c7d97e2c7 ("ARM: dts: imx7ulp: Add wdog1 node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7ulp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55c..bcec98b964114 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@ wdog1: watchdog@403d0000 {
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
-- 
2.34.1

[PATCH 5.16 105/203] arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers

[Greg Kroah-Hartman]

From: Martin Kepplinger <martin.kepplinger@puri.sm>

[ Upstream commit 283d45145fbf460dbaf0229cacd7ed60ec52f364 ]

The port numbers for the imx8mq mipi csi controller are wrong and
the mipi driver can't find any media devices as port@1 is connected
to the CSI bridge, not port@0. And port@0 is connected to the
source - the sensor. Fix this.

Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 71bf497f99c25..c222d93f5e649 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1123,8 +1123,8 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1175,8 +1175,8 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;
-- 
2.34.1

[PATCH 5.16 106/203] usb: f_fs: Fix use-after-free for epfile

[Greg Kroah-Hartman]

From: Udipto Goswami <quic_ugoswami@quicinc.com>

[ Upstream commit ebe2b1add1055b903e2acd86b290a85297edc0b3 ]

Consider a case where ffs_func_eps_disable is called from
ffs_func_disable as part of composition switch and at the
same time ffs_epfile_release get called from userspace.
ffs_epfile_release will free up the read buffer and call
ffs_data_closed which in turn destroys ffs->epfiles and
mark it as NULL. While this was happening the driver has
already initialized the local epfile in ffs_func_eps_disable
which is now freed and waiting to acquire the spinlock. Once
spinlock is acquired the driver proceeds with the stale value
of epfile and tries to free the already freed read buffer
causing use-after-free.

Following is the illustration of the race:

      CPU1                                  CPU2

   ffs_func_eps_disable
   epfiles (local copy)
					ffs_epfile_release
					ffs_data_closed
					if (last file closed)
					ffs_data_reset
					ffs_data_clear
					ffs_epfiles_destroy
spin_lock
dereference epfiles

Fix this races by taking epfiles local copy & assigning it under
spinlock and if epfiles(local) is null then update it in ffs->epfiles
then finally destroy it.
Extending the scope further from the race, protecting the ep related
structures, and concurrent accesses.

Fixes: a9e6f83c2df1 ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable")
Co-developed-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/1643256595-10797-1-git-send-email-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_fs.c | 56 ++++++++++++++++++++++--------
 1 file changed, 42 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 25ad1e97a4585..1922fd02043c5 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1711,16 +1711,24 @@ static void ffs_data_put(struct ffs_data *ffs)
 
 static void ffs_data_closed(struct ffs_data *ffs)
 {
+	struct ffs_epfile *epfiles;
+	unsigned long flags;
+
 	ENTER();
 
 	if (atomic_dec_and_test(&ffs->opened)) {
 		if (ffs->no_disconnect) {
 			ffs->state = FFS_DEACTIVATED;
-			if (ffs->epfiles) {
-				ffs_epfiles_destroy(ffs->epfiles,
-						   ffs->eps_count);
-				ffs->epfiles = NULL;
-			}
+			spin_lock_irqsave(&ffs->eps_lock, flags);
+			epfiles = ffs->epfiles;
+			ffs->epfiles = NULL;
+			spin_unlock_irqrestore(&ffs->eps_lock,
+							flags);
+
+			if (epfiles)
+				ffs_epfiles_destroy(epfiles,
+						 ffs->eps_count);
+
 			if (ffs->setup_state == FFS_SETUP_PENDING)
 				__ffs_ep0_stall(ffs);
 		} else {
@@ -1767,14 +1775,27 @@ static struct ffs_data *ffs_data_new(const char *dev_name)
 
 static void ffs_data_clear(struct ffs_data *ffs)
 {
+	struct ffs_epfile *epfiles;
+	unsigned long flags;
+
 	ENTER();
 
 	ffs_closed(ffs);
 
 	BUG_ON(ffs->gadget);
 
-	if (ffs->epfiles) {
-		ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count);
+	spin_lock_irqsave(&ffs->eps_lock, flags);
+	epfiles = ffs->epfiles;
+	ffs->epfiles = NULL;
+	spin_unlock_irqrestore(&ffs->eps_lock, flags);
+
+	/*
+	 * potential race possible between ffs_func_eps_disable
+	 * & ffs_epfile_release therefore maintaining a local
+	 * copy of epfile will save us from use-after-free.
+	 */
+	if (epfiles) {
+		ffs_epfiles_destroy(epfiles, ffs->eps_count);
 		ffs->epfiles = NULL;
 	}
 
@@ -1922,12 +1943,15 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
 
 static void ffs_func_eps_disable(struct ffs_function *func)
 {
-	struct ffs_ep *ep         = func->eps;
-	struct ffs_epfile *epfile = func->ffs->epfiles;
-	unsigned count            = func->ffs->eps_count;
+	struct ffs_ep *ep;
+	struct ffs_epfile *epfile;
+	unsigned short count;
 	unsigned long flags;
 
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	count = func->ffs->eps_count;
+	epfile = func->ffs->epfiles;
+	ep = func->eps;
 	while (count--) {
 		/* pending requests get nuked */
 		if (ep->ep)
@@ -1945,14 +1969,18 @@ static void ffs_func_eps_disable(struct ffs_function *func)
 
 static int ffs_func_eps_enable(struct ffs_function *func)
 {
-	struct ffs_data *ffs      = func->ffs;
-	struct ffs_ep *ep         = func->eps;
-	struct ffs_epfile *epfile = ffs->epfiles;
-	unsigned count            = ffs->eps_count;
+	struct ffs_data *ffs;
+	struct ffs_ep *ep;
+	struct ffs_epfile *epfile;
+	unsigned short count;
 	unsigned long flags;
 	int ret = 0;
 
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	ffs = func->ffs;
+	ep = func->eps;
+	epfile = ffs->epfiles;
+	count = ffs->eps_count;
 	while(count--) {
 		ep->ep->driver_data = ep;
 
-- 
2.34.1

[PATCH 5.16 107/203] arm64: Enable Cortex-A510 erratum 2051678 by default

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit a4b92cebc31d49b7e6ef0ce584c7f2a2e112877d ]

The recently added configuration option for Cortex A510 erratum 2051678 does
not have a "default y" unlike other errata fixes. This appears to simply be
an oversight since the help text suggests enabling the option if unsure and
there's nothing in the commit log to suggest it is intentional.

Fixes: 297ae1eb23b0 ("arm64: cpufeature: List early Cortex-A510 parts as having broken dbm")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220201144838.20037-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 38e7f19df14d4..ae0e93871ee5f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -672,6 +672,7 @@ config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 
 config ARM64_ERRATUM_2051678
 	bool "Cortex-A510: 2051678: disable Hardware Update of the page table dirty bit"
+	default y
 	help
 	  This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678.
 	  Affected Coretex-A510 might not respect the ordering rules for
-- 
2.34.1

[PATCH 5.16 108/203] phy: dphy: Correct clk_pre parameter

[Greg Kroah-Hartman]

From: Liu Ying <victor.liu@nxp.com>

[ Upstream commit 9a8406ba1a9a2965c27e0db1d7753471d12ee9ff ]

The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE
parameter's unit is Unit Interval(UI) and the minimum value is 8.  Also,
kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy
mentions that it should be in UI.  However, the dphy core driver wrongly
sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds.

So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE
parameter's minimum value according to the D-PHY specification.

I'm assuming that all impacted custom drivers shall program values in
TxByteClkHS cycles into hardware for the T-CLK-PRE parameter.  The D-PHY
specification mentions that the frequency of TxByteClkHS is exactly 1/8
the High-Speed(HS) bit rate(each HS bit consumes one UI).  So, relevant
custom driver code is changed to program those values as
DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then.

Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.

Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options")
Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/nwl-dsi.c                 | 12 +++++-------
 drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c    |  3 ++-
 drivers/phy/phy-core-mipi-dphy.c                 |  4 ++--
 drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c |  3 ++-
 4 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index a7389a0facfb4..af07eeb47ca02 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/math64.h>
@@ -196,12 +197,9 @@ static u32 ps2bc(struct nwl_dsi *dsi, unsigned long long ps)
 /*
  * ui2bc - UI time periods to byte clock cycles
  */
-static u32 ui2bc(struct nwl_dsi *dsi, unsigned long long ui)
+static u32 ui2bc(unsigned int ui)
 {
-	u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
-
-	return DIV64_U64_ROUND_UP(ui * dsi->lanes,
-				  dsi->mode.clock * 1000 * bpp);
+	return DIV_ROUND_UP(ui, BITS_PER_BYTE);
 }
 
 /*
@@ -232,12 +230,12 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
 	}
 
 	/* values in byte clock cycles */
-	cycles = ui2bc(dsi, cfg->clk_pre);
+	cycles = ui2bc(cfg->clk_pre);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_pre: 0x%x\n", cycles);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_T_PRE, cycles);
 	cycles = ps2bc(dsi, cfg->lpx + cfg->clk_prepare + cfg->clk_zero);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap (pre): 0x%x\n", cycles);
-	cycles += ui2bc(dsi, cfg->clk_pre);
+	cycles += ui2bc(cfg->clk_pre);
 	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_post: 0x%x\n", cycles);
 	nwl_dsi_write(dsi, NWL_DSI_CFG_T_POST, cycles);
 	cycles = ps2bc(dsi, cfg->hs_exit);
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
index cd2332bf0e31a..fdbd64c03e12b 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
@@ -9,6 +9,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -250,7 +251,7 @@ static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy)
 		     (DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) |
 		     (DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24));
 	regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1,
-		     DIV_ROUND_UP(priv->config.clk_pre, temp));
+		     DIV_ROUND_UP(priv->config.clk_pre, BITS_PER_BYTE));
 
 	regmap_write(priv->regmap, MIPI_DSI_HS_TIM,
 		     DIV_ROUND_UP(priv->config.hs_exit, temp) |
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index 288c9c67aa748..ccb4045685cdd 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -36,7 +36,7 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
 
 	cfg->clk_miss = 0;
 	cfg->clk_post = 60000 + 52 * ui;
-	cfg->clk_pre = 8000;
+	cfg->clk_pre = 8;
 	cfg->clk_prepare = 38000;
 	cfg->clk_settle = 95000;
 	cfg->clk_term_en = 0;
@@ -97,7 +97,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
 	if (cfg->clk_post < (60000 + 52 * ui))
 		return -EINVAL;
 
-	if (cfg->clk_pre < 8000)
+	if (cfg->clk_pre < 8)
 		return -EINVAL;
 
 	if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
index 347dc79a18c18..630e01b5c19b9 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -5,6 +5,7 @@
  * Author: Wyon Bi <bivvy.bi@rock-chips.com>
  */
 
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
@@ -364,7 +365,7 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno)
 	 * The value of counter for HS Tclk-pre
 	 * Tclk-pre = Tpin_txbyteclkhs * value
 	 */
-	clk_pre = DIV_ROUND_UP(cfg->clk_pre, t_txbyteclkhs);
+	clk_pre = DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE);
 
 	/*
 	 * The value of counter for HS Tlpx Time
-- 
2.34.1

[PATCH 5.16 109/203] gpio: aggregator: Fix calling into sleeping GPIO controllers

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 2cba05451a6d0c703bb74f1a250691404f27c4f1 ]

If the parent GPIO controller is a sleeping controller (e.g. a GPIO
controller connected to I2C), getting or setting a GPIO triggers a
might_sleep() warning.  This happens because the GPIO Aggregator takes
the can_sleep flag into account only for its internal locking, not for
calling into the parent GPIO controller.

Fix this by using the gpiod_[gs]et*_cansleep() APIs when calling into a
sleeping GPIO controller.

Reported-by: Mikko Salomäki <ms@datarespons.se>
Fixes: 828546e24280f721 ("gpio: Add GPIO Aggregator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-aggregator.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
index e9671d1660ef4..ac20f9bd1be61 100644
--- a/drivers/gpio/gpio-aggregator.c
+++ b/drivers/gpio/gpio-aggregator.c
@@ -278,7 +278,8 @@ static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
 {
 	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
 
-	return gpiod_get_value(fwd->descs[offset]);
+	return chip->can_sleep ? gpiod_get_value_cansleep(fwd->descs[offset])
+			       : gpiod_get_value(fwd->descs[offset]);
 }
 
 static int gpio_fwd_get_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
@@ -293,7 +294,10 @@ static int gpio_fwd_get_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
 	for_each_set_bit(i, mask, fwd->chip.ngpio)
 		descs[j++] = fwd->descs[i];
 
-	error = gpiod_get_array_value(j, descs, NULL, values);
+	if (fwd->chip.can_sleep)
+		error = gpiod_get_array_value_cansleep(j, descs, NULL, values);
+	else
+		error = gpiod_get_array_value(j, descs, NULL, values);
 	if (error)
 		return error;
 
@@ -328,7 +332,10 @@ static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
 {
 	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
 
-	gpiod_set_value(fwd->descs[offset], value);
+	if (chip->can_sleep)
+		gpiod_set_value_cansleep(fwd->descs[offset], value);
+	else
+		gpiod_set_value(fwd->descs[offset], value);
 }
 
 static void gpio_fwd_set_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
@@ -343,7 +350,10 @@ static void gpio_fwd_set_multiple(struct gpiochip_fwd *fwd, unsigned long *mask,
 		descs[j++] = fwd->descs[i];
 	}
 
-	gpiod_set_array_value(j, descs, NULL, values);
+	if (fwd->chip.can_sleep)
+		gpiod_set_array_value_cansleep(j, descs, NULL, values);
+	else
+		gpiod_set_array_value(j, descs, NULL, values);
 }
 
 static void gpio_fwd_set_multiple_locked(struct gpio_chip *chip,
-- 
2.34.1

[PATCH 5.16 110/203] NFS: Dont overfill uncached readdir pages

[Greg Kroah-Hartman]

From: trondmy@kernel.org <trondmy@kernel.org>

[ Upstream commit d9c4e39c1f8f8a8ebaccf00b8f22c14364b2d27e ]

If we're doing an uncached read of the directory, then we ideally want
to read only the exact set of entries that will fit in the buffer
supplied by the getdents() system call. So unlike the case where we're
reading into the page cache, let's send only one READDIR call, before
trying to fill up the buffer.

Fixes: 35df59d3ef69 ("NFS: Reduce number of RPC calls when doing uncached readdir")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index faf5168880223..13740f1e3972e 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -866,7 +866,8 @@ static int nfs_readdir_xdr_to_array(struct nfs_readdir_descriptor *desc,
 
 		status = nfs_readdir_page_filler(desc, entry, pages, pglen,
 						 arrays, narrays);
-	} while (!status && nfs_readdir_page_needs_filling(page));
+	} while (!status && nfs_readdir_page_needs_filling(page) &&
+		page_mapping(page));
 
 	nfs_readdir_free_pages(pages, array_size);
 out:
-- 
2.34.1

[PATCH 5.16 111/203] NFS: Dont skip directory entries when doing uncached readdir

[Greg Kroah-Hartman]

From: trondmy@kernel.org <trondmy@kernel.org>

[ Upstream commit ce292d8faf41f62e0fb0c78476c6fce5d629235a ]

Ensure that we initialise desc->cache_entry_index correctly in
uncached_readdir().

Fixes: d1bacf9eb2fd ("NFS: add readdir cache array")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 13740f1e3972e..63d7da0b7e32c 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1041,6 +1041,7 @@ static int uncached_readdir(struct nfs_readdir_descriptor *desc)
 		goto out;
 
 	desc->page_index = 0;
+	desc->cache_entry_index = 0;
 	desc->last_cookie = desc->dir_cookie;
 	desc->duped = 0;
 
-- 
2.34.1

[PATCH 5.16 112/203] NFS: Avoid duplicate uncached readdir calls on eof

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit e1d2699b96793d19388e302fa095e0da2c145701 ]

If we've reached the end of the directory, then cache that information
in the context so that we don't need to do an uncached readdir in order
to rediscover that fact.

Fixes: 794092c57f89 ("NFS: Do uncached readdir when we're seeking a cookie in an empty page cache")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c           | 20 +++++++++++++++-----
 include/linux/nfs_fs.h |  1 +
 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 63d7da0b7e32c..b2460a0504411 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -79,6 +79,7 @@ static struct nfs_open_dir_context *alloc_nfs_open_dir_context(struct inode *dir
 		ctx->dir_cookie = 0;
 		ctx->dup_cookie = 0;
 		ctx->page_index = 0;
+		ctx->eof = false;
 		spin_lock(&dir->i_lock);
 		if (list_empty(&nfsi->open_files) &&
 		    (nfsi->cache_validity & NFS_INO_DATA_INVAL_DEFER))
@@ -167,6 +168,7 @@ struct nfs_readdir_descriptor {
 	unsigned int	cache_entry_index;
 	signed char duped;
 	bool plus;
+	bool eob;
 	bool eof;
 };
 
@@ -988,7 +990,7 @@ static void nfs_do_filldir(struct nfs_readdir_descriptor *desc,
 		ent = &array->array[i];
 		if (!dir_emit(desc->ctx, ent->name, ent->name_len,
 		    nfs_compat_user_ino64(ent->ino), ent->d_type)) {
-			desc->eof = true;
+			desc->eob = true;
 			break;
 		}
 		memcpy(desc->verf, verf, sizeof(desc->verf));
@@ -1004,7 +1006,7 @@ static void nfs_do_filldir(struct nfs_readdir_descriptor *desc,
 			desc->duped = 1;
 	}
 	if (array->page_is_eof)
-		desc->eof = true;
+		desc->eof = !desc->eob;
 
 	kunmap(desc->page);
 	dfprintk(DIRCACHE, "NFS: nfs_do_filldir() filling ended @ cookie %llu\n",
@@ -1047,7 +1049,7 @@ static int uncached_readdir(struct nfs_readdir_descriptor *desc)
 
 	status = nfs_readdir_xdr_to_array(desc, desc->verf, verf, arrays, sz);
 
-	for (i = 0; !desc->eof && i < sz && arrays[i]; i++) {
+	for (i = 0; !desc->eob && i < sz && arrays[i]; i++) {
 		desc->page = arrays[i];
 		nfs_do_filldir(desc, verf);
 	}
@@ -1106,9 +1108,15 @@ static int nfs_readdir(struct file *file, struct dir_context *ctx)
 	desc->duped = dir_ctx->duped;
 	page_index = dir_ctx->page_index;
 	desc->attr_gencount = dir_ctx->attr_gencount;
+	desc->eof = dir_ctx->eof;
 	memcpy(desc->verf, dir_ctx->verf, sizeof(desc->verf));
 	spin_unlock(&file->f_lock);
 
+	if (desc->eof) {
+		res = 0;
+		goto out_free;
+	}
+
 	if (test_and_clear_bit(NFS_INO_FORCE_READDIR, &nfsi->flags) &&
 	    list_is_singular(&nfsi->open_files))
 		invalidate_mapping_pages(inode->i_mapping, page_index + 1, -1);
@@ -1142,7 +1150,7 @@ static int nfs_readdir(struct file *file, struct dir_context *ctx)
 
 		nfs_do_filldir(desc, nfsi->cookieverf);
 		nfs_readdir_page_unlock_and_put_cached(desc);
-	} while (!desc->eof);
+	} while (!desc->eob && !desc->eof);
 
 	spin_lock(&file->f_lock);
 	dir_ctx->dir_cookie = desc->dir_cookie;
@@ -1150,9 +1158,10 @@ static int nfs_readdir(struct file *file, struct dir_context *ctx)
 	dir_ctx->duped = desc->duped;
 	dir_ctx->attr_gencount = desc->attr_gencount;
 	dir_ctx->page_index = desc->page_index;
+	dir_ctx->eof = desc->eof;
 	memcpy(dir_ctx->verf, desc->verf, sizeof(dir_ctx->verf));
 	spin_unlock(&file->f_lock);
-
+out_free:
 	kfree(desc);
 
 out:
@@ -1194,6 +1203,7 @@ static loff_t nfs_llseek_dir(struct file *filp, loff_t offset, int whence)
 		if (offset == 0)
 			memset(dir_ctx->verf, 0, sizeof(dir_ctx->verf));
 		dir_ctx->duped = 0;
+		dir_ctx->eof = false;
 	}
 	spin_unlock(&filp->f_lock);
 	return offset;
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index f33559acbcc28..29a2ab5de1daa 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -105,6 +105,7 @@ struct nfs_open_dir_context {
 	__u64 dup_cookie;
 	pgoff_t page_index;
 	signed char duped;
+	bool eof;
 };
 
 /*
-- 
2.34.1

[PATCH 5.16 113/203] drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd.

[Greg Kroah-Hartman]

From: Dave Stevenson <dave.stevenson@raspberrypi.com>

[ Upstream commit 1d118965965f89948236ebe23072bb1fca5e7832 ]

The 2711 pixel valve can't produce odd horizontal timings, and
checks were added to vc4_hdmi_encoder_atomic_check and
vc4_hdmi_encoder_mode_valid to filter out/block selection of
such modes.

Modes with DRM_MODE_FLAG_DBLCLK double all the horizontal timing
values before programming them into the PV. The PV values,
therefore, can not be odd, and so the modes can be supported.

Amend the filtering appropriately.

Fixes: 57fb32e632be ("drm/vc4: hdmi: Block odd horizontal timings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127135116.298278-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c000946996edb..24f11c07bc3c7 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1090,6 +1090,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	unsigned long long tmds_rate;
 
 	if (vc4_hdmi->variant->unsupported_odd_h_timings &&
+	    !(mode->flags & DRM_MODE_FLAG_DBLCLK) &&
 	    ((mode->hdisplay % 2) || (mode->hsync_start % 2) ||
 	     (mode->hsync_end % 2) || (mode->htotal % 2)))
 		return -EINVAL;
@@ -1137,6 +1138,7 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 
 	if (vc4_hdmi->variant->unsupported_odd_h_timings &&
+	    !(mode->flags & DRM_MODE_FLAG_DBLCLK) &&
 	    ((mode->hdisplay % 2) || (mode->hsync_start % 2) ||
 	     (mode->hsync_end % 2) || (mode->htotal % 2)))
 		return MODE_H_ILLEGAL;
-- 
2.34.1

[PATCH 5.16 114/203] misc: fastrpc: avoid double fput() on failed usercopy

[Greg Kroah-Hartman]

From: Mathias Krause <minipli@grsecurity.net>

[ Upstream commit 46963e2e0629cb31c96b1d47ddd89dc3d8990b34 ]

If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.

Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.

Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid.

Fixes: 6cffd79504ce ("misc: fastrpc: Add support for dmabuf exporter")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/fastrpc.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 4ccbf43e6bfa9..aa1682b94a23b 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1288,7 +1288,14 @@ static int fastrpc_dmabuf_alloc(struct fastrpc_user *fl, char __user *argp)
 	}
 
 	if (copy_to_user(argp, &bp, sizeof(bp))) {
-		dma_buf_put(buf->dmabuf);
+		/*
+		 * The usercopy failed, but we can't do much about it, as
+		 * dma_buf_fd() already called fd_install() and made the
+		 * file descriptor accessible for the current process. It
+		 * might already be closed and dmabuf no longer valid when
+		 * we reach this point. Therefore "leak" the fd and rely on
+		 * the process exit path to do any required cleanup.
+		 */
 		return -EFAULT;
 	}
 
-- 
2.34.1

[PATCH 5.16 115/203] net: sparx5: Fix get_stat64 crash in tcpdump

[Greg Kroah-Hartman]

From: Steen Hegelund <steen.hegelund@microchip.com>

[ Upstream commit ed14fc7a79ab43e9f2cb1fa9c1733fdc133bba30 ]

This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.

The portstats pointer was incorrectly incremented when fetching priority
based statistics.

Fixes: af4b11022e2d (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.c b/drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.c
index 59783fc46a7b9..10b866e9f7266 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.c
@@ -1103,7 +1103,7 @@ void sparx5_get_stats64(struct net_device *ndev,
 	stats->tx_carrier_errors = portstats[spx5_stats_tx_csense_cnt];
 	stats->tx_window_errors = portstats[spx5_stats_tx_late_coll_cnt];
 	stats->rx_dropped = portstats[spx5_stats_ana_ac_port_stat_lsb_cnt];
-	for (idx = 0; idx < 2 * SPX5_PRIOS; ++idx, ++stats)
+	for (idx = 0; idx < 2 * SPX5_PRIOS; ++idx)
 		stats->rx_dropped += portstats[spx5_stats_green_p0_rx_port_drop
 					       + idx];
 	stats->tx_dropped = portstats[spx5_stats_tx_local_drop];
-- 
2.34.1

[PATCH 5.16 116/203] netfilter: nft_payload: dont allow th access for fragments

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit a9e8503def0fd4ed89ade1f61c315f904581d439 ]

Loads relative to ->thoff naturally expect that this points to the
transport header, but this is only true if pkt->fragoff == 0.

This has little effect for rulesets with connection tracking/nat because
these enable ip defra. For other rulesets this prevents false matches.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_exthdr.c  | 2 +-
 net/netfilter/nft_payload.c | 9 +++++----
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c
index dbe1f2e7dd9ed..9e927ab4df151 100644
--- a/net/netfilter/nft_exthdr.c
+++ b/net/netfilter/nft_exthdr.c
@@ -167,7 +167,7 @@ nft_tcp_header_pointer(const struct nft_pktinfo *pkt,
 {
 	struct tcphdr *tcph;
 
-	if (pkt->tprot != IPPROTO_TCP)
+	if (pkt->tprot != IPPROTO_TCP || pkt->fragoff)
 		return NULL;
 
 	tcph = skb_header_pointer(pkt->skb, nft_thoff(pkt), sizeof(*tcph), buffer);
diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c
index 58e96a0fe0b4c..a4fbce560bddb 100644
--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -83,7 +83,7 @@ static int __nft_payload_inner_offset(struct nft_pktinfo *pkt)
 {
 	unsigned int thoff = nft_thoff(pkt);
 
-	if (!(pkt->flags & NFT_PKTINFO_L4PROTO))
+	if (!(pkt->flags & NFT_PKTINFO_L4PROTO) || pkt->fragoff)
 		return -1;
 
 	switch (pkt->tprot) {
@@ -147,7 +147,7 @@ void nft_payload_eval(const struct nft_expr *expr,
 		offset = skb_network_offset(skb);
 		break;
 	case NFT_PAYLOAD_TRANSPORT_HEADER:
-		if (!(pkt->flags & NFT_PKTINFO_L4PROTO))
+		if (!(pkt->flags & NFT_PKTINFO_L4PROTO) || pkt->fragoff)
 			goto err;
 		offset = nft_thoff(pkt);
 		break;
@@ -657,7 +657,7 @@ static void nft_payload_set_eval(const struct nft_expr *expr,
 		offset = skb_network_offset(skb);
 		break;
 	case NFT_PAYLOAD_TRANSPORT_HEADER:
-		if (!(pkt->flags & NFT_PKTINFO_L4PROTO))
+		if (!(pkt->flags & NFT_PKTINFO_L4PROTO) || pkt->fragoff)
 			goto err;
 		offset = nft_thoff(pkt);
 		break;
@@ -696,7 +696,8 @@ static void nft_payload_set_eval(const struct nft_expr *expr,
 	if (priv->csum_type == NFT_PAYLOAD_CSUM_SCTP &&
 	    pkt->tprot == IPPROTO_SCTP &&
 	    skb->ip_summed != CHECKSUM_PARTIAL) {
-		if (nft_payload_csum_sctp(skb, nft_thoff(pkt)))
+		if (pkt->fragoff == 0 &&
+		    nft_payload_csum_sctp(skb, nft_thoff(pkt)))
 			goto err;
 	}
 
-- 
2.34.1

[PATCH 5.16 117/203] netfilter: ctnetlink: disable helper autoassign

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit d1ca60efc53d665cf89ed847a14a510a81770b81 ]

When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:

ctnetlink_create_conntrack
  -> nf_ct_helper_ext_add + assign helper
    -> ctnetlink_setup_nat
      -> ctnetlink_parse_nat_setup
         -> parse_nat_setup -> nfnetlink_parse_nat_setup
	                       -> nf_nat_setup_info
                                 -> nf_conntrack_alter_reply
                                   -> __nf_ct_try_assign_helper

... and __nf_ct_try_assign_helper will zero the helper again.

Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.

Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().

NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.

Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/netfilter/nf_conntrack_common.h | 2 +-
 net/netfilter/nf_conntrack_netlink.c               | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h
index 4b3395082d15c..26071021e986f 100644
--- a/include/uapi/linux/netfilter/nf_conntrack_common.h
+++ b/include/uapi/linux/netfilter/nf_conntrack_common.h
@@ -106,7 +106,7 @@ enum ip_conntrack_status {
 	IPS_NAT_CLASH = IPS_UNTRACKED,
 #endif
 
-	/* Conntrack got a helper explicitly attached via CT target. */
+	/* Conntrack got a helper explicitly attached (ruleset, ctnetlink). */
 	IPS_HELPER_BIT = 13,
 	IPS_HELPER = (1 << IPS_HELPER_BIT),
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index ec4164c32d270..2d7f63ad33604 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -2311,7 +2311,8 @@ ctnetlink_create_conntrack(struct net *net,
 			if (helper->from_nlattr)
 				helper->from_nlattr(helpinfo, ct);
 
-			/* not in hash table yet so not strictly necessary */
+			/* disable helper auto-assignment for this entry */
+			ct->status |= IPS_HELPER;
 			RCU_INIT_POINTER(help->helper, helper);
 		}
 	} else {
-- 
2.34.1

[PATCH 5.16 118/203] arm64: dts: meson-g12b-odroid-n2: fix typo dio2133

[Greg Kroah-Hartman]

From: Dongjin Kim <tobetter@gmail.com>

[ Upstream commit bc41099f060ea74ac8d02c51bd0f5f46d969bedf ]

Typo in audio amplifier node, dioo2133 -> dio2133

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")
Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 3e968b2441918..fd3fa82e4c330 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@ aliases {
 		rtc1 = &vrtc;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -219,7 +219,7 @@ sound {
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
-- 
2.34.1

[PATCH 5.16 119/203] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator

[Greg Kroah-Hartman]

From: Lutz Koschorreck <theleks@ko-hh.de>

[ Upstream commit 323ca765bfe9d637fa774373baec0bc41e51fcfa ]

The interrupt pin of the external ethernet phy is used, instead of the
enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in
the gpio_ao bank.

This causes phy interrupt problems at system startup.
[   76.645190] irq 36: nobody cared (try booting with the "irqpoll" option)
[   76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2
[   76.649629] Hardware name: Hardkernel ODROID-HC4 (DT)
[   76.649635] Call trace:
[   76.649638]  dump_backtrace+0x0/0x1c8
[   76.649658]  show_stack+0x14/0x60
[   76.649667]  dump_stack_lvl+0x64/0x7c
[   76.649676]  dump_stack+0x14/0x2c
[   76.649683]  __report_bad_irq+0x38/0xe8
[   76.649695]  note_interrupt+0x220/0x3a0
[   76.649704]  handle_irq_event_percpu+0x58/0x88
[   76.649713]  handle_irq_event+0x44/0xd8
[   76.649721]  handle_fasteoi_irq+0xa8/0x130
[   76.649730]  generic_handle_domain_irq+0x38/0x58
[   76.649738]  gic_handle_irq+0x9c/0xb8
[   76.649747]  call_on_irq_stack+0x28/0x38
[   76.649755]  do_interrupt_handler+0x7c/0x80
[   76.649763]  el1_interrupt+0x34/0x80
[   76.649772]  el1h_64_irq_handler+0x14/0x20
[   76.649781]  el1h_64_irq+0x74/0x78
[   76.649788]  irq_finalize_oneshot.part.56+0x68/0xf8
[   76.649796]  irq_thread_fn+0x5c/0x98
[   76.649804]  irq_thread+0x13c/0x260
[   76.649812]  kthread+0x144/0x178
[   76.649822]  ret_from_fork+0x10/0x20
[   76.649830] handlers:
[   76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt
[   76.661256] Disabling IRQ #36

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed spurious invalid & blank lines from commit message]
Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 5779e70caccd3..328f4adfaaa9d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 
-- 
2.34.1

[PATCH 5.16 120/203] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2

[Greg Kroah-Hartman]

From: Dongjin Kim <tobetter@gmail.com>

[ Upstream commit a5be3e5d46f373fe1d2ee835c7ede31769c241cd ]

GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of
TF_PWR_EN of 'FC8731' on BPI-M5

Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220127151656.GA2419733@paju
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index 212c6aa5a3b86..5751c48620edf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@ vddio_c: regulator-vddio_c {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 
-- 
2.34.1

[PATCH 5.16 121/203] arm64: dts: meson-sm1-odroid: fix boot loop after reboot

[Greg Kroah-Hartman]

From: Lutz Koschorreck <theleks@ko-hh.de>

[ Upstream commit e6b03375132fefddc55cf700418cf794b3884e0c ]

Since the correct gpio pin is used for enabling tf-io regulator the
system did not boot correctly after calling reboot.

[   36.862443] reboot: Restarting system
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd  1.
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id:
SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;...

Setting the gpio to open drain solves the issue.

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: reduced serial log & removed invalid character in commit message]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220128193150.GA1304381@odroid-VirtualBox
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 328f4adfaaa9d..76ad052fbf0c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
-- 
2.34.1

[PATCH 5.16 122/203] ixgbevf: Require large buffers for build_skb on 82599VF

[Greg Kroah-Hartman]

From: Samuel Mendoza-Jonas <samjonas@amazon.com>

[ Upstream commit fe68195daf34d5dddacd3f93dd3eafc4beca3a0e ]

>From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.

However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].

This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.

Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.

[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c

Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index d81811ab4ec48..c2f87a2d0ef46 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1984,14 +1984,15 @@ static void ixgbevf_set_rx_buffer_len(struct ixgbevf_adapter *adapter,
 	if (adapter->flags & IXGBEVF_FLAGS_LEGACY_RX)
 		return;
 
-	set_ring_build_skb_enabled(rx_ring);
+	if (PAGE_SIZE < 8192)
+		if (max_frame > IXGBEVF_MAX_FRAME_BUILD_SKB)
+			set_ring_uses_large_buffer(rx_ring);
 
-	if (PAGE_SIZE < 8192) {
-		if (max_frame <= IXGBEVF_MAX_FRAME_BUILD_SKB)
-			return;
+	/* 82599 can't rely on RXDCTL.RLPML to restrict the size of the frame */
+	if (adapter->hw.mac.type == ixgbe_mac_82599_vf && !ring_uses_large_buffer(rx_ring))
+		return;
 
-		set_ring_uses_large_buffer(rx_ring);
-	}
+	set_ring_build_skb_enabled(rx_ring);
 }
 
 /**
-- 
2.34.1

[PATCH 5.16 123/203] tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit f8d9d938514f46c4892aff6bfe32f425e84d81cc ]

syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY)
calls over the same TCP socket would again trigger the
infamous warning in inet_sock_destruct()

	WARN_ON(sk_forward_alloc_get(sk));

While Talal took into account a mix of regular copied data
and MSG_ZEROCOPY one in the same skb, the sendpage() path
has been forgotten.

We want the charging to happen for sendpage(), because
pages could be coming from a pipe. What is missing is the
downgrading of pure zerocopy status to make sure
sk_forward_alloc will stay synced.

Add tcp_downgrade_zcopy_pure() helper so that we can
use it from the two callers.

Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220203225547.665114-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp.c | 33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 94cbba9fb12b1..28abb0bb1c515 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -936,6 +936,22 @@ void tcp_remove_empty_skb(struct sock *sk)
 	}
 }
 
+/* skb changing from pure zc to mixed, must charge zc */
+static int tcp_downgrade_zcopy_pure(struct sock *sk, struct sk_buff *skb)
+{
+	if (unlikely(skb_zcopy_pure(skb))) {
+		u32 extra = skb->truesize -
+			    SKB_TRUESIZE(skb_end_offset(skb));
+
+		if (!sk_wmem_schedule(sk, extra))
+			return -ENOMEM;
+
+		sk_mem_charge(sk, extra);
+		skb_shinfo(skb)->flags &= ~SKBFL_PURE_ZEROCOPY;
+	}
+	return 0;
+}
+
 static struct sk_buff *tcp_build_frag(struct sock *sk, int size_goal, int flags,
 				      struct page *page, int offset, size_t *size)
 {
@@ -971,7 +987,7 @@ static struct sk_buff *tcp_build_frag(struct sock *sk, int size_goal, int flags,
 		tcp_mark_push(tp, skb);
 		goto new_segment;
 	}
-	if (!sk_wmem_schedule(sk, copy))
+	if (tcp_downgrade_zcopy_pure(sk, skb) || !sk_wmem_schedule(sk, copy))
 		return NULL;
 
 	if (can_coalesce) {
@@ -1319,19 +1335,8 @@ int tcp_sendmsg_locked(struct sock *sk, struct msghdr *msg, size_t size)
 
 			copy = min_t(int, copy, pfrag->size - pfrag->offset);
 
-			/* skb changing from pure zc to mixed, must charge zc */
-			if (unlikely(skb_zcopy_pure(skb))) {
-				u32 extra = skb->truesize -
-					    SKB_TRUESIZE(skb_end_offset(skb));
-
-				if (!sk_wmem_schedule(sk, extra))
-					goto wait_for_space;
-
-				sk_mem_charge(sk, extra);
-				skb_shinfo(skb)->flags &= ~SKBFL_PURE_ZEROCOPY;
-			}
-
-			if (!sk_wmem_schedule(sk, copy))
+			if (tcp_downgrade_zcopy_pure(sk, skb) ||
+			    !sk_wmem_schedule(sk, copy))
 				goto wait_for_space;
 
 			err = skb_copy_to_page_nocache(sk, &msg->msg_iter, skb,
-- 
2.34.1

[PATCH 5.16 124/203] net: mscc: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 59085208e4a2183998964844f8684fea0378128d ]

The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.

But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.

This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.

Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.

Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 294bb4eb3833f..ac5849436d021 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1292,6 +1292,8 @@ static void
 ocelot_populate_ipv4_ptp_event_trap_key(struct ocelot_vcap_filter *trap)
 {
 	trap->key_type = OCELOT_VCAP_KEY_IPV4;
+	trap->key.ipv4.proto.value[0] = IPPROTO_UDP;
+	trap->key.ipv4.proto.mask[0] = 0xff;
 	trap->key.ipv4.dport.value = PTP_EV_PORT;
 	trap->key.ipv4.dport.mask = 0xffff;
 }
@@ -1300,6 +1302,8 @@ static void
 ocelot_populate_ipv6_ptp_event_trap_key(struct ocelot_vcap_filter *trap)
 {
 	trap->key_type = OCELOT_VCAP_KEY_IPV6;
+	trap->key.ipv4.proto.value[0] = IPPROTO_UDP;
+	trap->key.ipv4.proto.mask[0] = 0xff;
 	trap->key.ipv6.dport.value = PTP_EV_PORT;
 	trap->key.ipv6.dport.mask = 0xffff;
 }
@@ -1308,6 +1312,8 @@ static void
 ocelot_populate_ipv4_ptp_general_trap_key(struct ocelot_vcap_filter *trap)
 {
 	trap->key_type = OCELOT_VCAP_KEY_IPV4;
+	trap->key.ipv4.proto.value[0] = IPPROTO_UDP;
+	trap->key.ipv4.proto.mask[0] = 0xff;
 	trap->key.ipv4.dport.value = PTP_GEN_PORT;
 	trap->key.ipv4.dport.mask = 0xffff;
 }
@@ -1316,6 +1322,8 @@ static void
 ocelot_populate_ipv6_ptp_general_trap_key(struct ocelot_vcap_filter *trap)
 {
 	trap->key_type = OCELOT_VCAP_KEY_IPV6;
+	trap->key.ipv4.proto.value[0] = IPPROTO_UDP;
+	trap->key.ipv4.proto.mask[0] = 0xff;
 	trap->key.ipv6.dport.value = PTP_GEN_PORT;
 	trap->key.ipv6.dport.mask = 0xffff;
 }
-- 
2.34.1

[PATCH 5.16 125/203] drm/panel: simple: Assign data from panel_dpi_probe() correctly

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ]

In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index eb475a3a774b7..87f30bced7b7e 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -588,6 +588,7 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 		err = panel_dpi_probe(dev, panel);
 		if (err)
 			goto free_ddc;
+		desc = panel->desc;
 	} else {
 		if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
 			panel_simple_parse_panel_timing_node(dev, panel, &dt);
-- 
2.34.1

[PATCH 5.16 125/203] drm/panel: simple: Assign data from panel_dpi_probe() correctly

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 6df4432a5eca101b5fd80fbee41d309f3d67928d ]

In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().

Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index eb475a3a774b7..87f30bced7b7e 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -588,6 +588,7 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 		err = panel_dpi_probe(dev, panel);
 		if (err)
 			goto free_ddc;
+		desc = panel->desc;
 	} else {
 		if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
 			panel_simple_parse_panel_timing_node(dev, panel, &dt);
-- 
2.34.1

[PATCH 5.16 126/203] s390/module: fix building test_modules_helpers.o with clang

[Greg Kroah-Hartman]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit e286f231eab410793f3e91c924e6dbd23edee05a ]

Move test_modules_return_* prototypes into a header file in order to
placate -Wmissing-prototypes.

Fixes: 90c5318795ee ("s390/module: test loading modules with a lot of relocations")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/lib/test_modules.c | 3 ---
 arch/s390/lib/test_modules.h | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/s390/lib/test_modules.c b/arch/s390/lib/test_modules.c
index d056baa8fbb0c..9894009fc1f25 100644
--- a/arch/s390/lib/test_modules.c
+++ b/arch/s390/lib/test_modules.c
@@ -5,9 +5,6 @@
 
 #include "test_modules.h"
 
-#define DECLARE_RETURN(i) int test_modules_return_ ## i(void)
-REPEAT_10000(DECLARE_RETURN);
-
 /*
  * Test that modules with many relocations are loaded properly.
  */
diff --git a/arch/s390/lib/test_modules.h b/arch/s390/lib/test_modules.h
index 43b5e4b4af3e4..6371fcf176845 100644
--- a/arch/s390/lib/test_modules.h
+++ b/arch/s390/lib/test_modules.h
@@ -47,4 +47,7 @@
 	__REPEAT_10000_1(f, 8); \
 	__REPEAT_10000_1(f, 9)
 
+#define DECLARE_RETURN(i) int test_modules_return_ ## i(void)
+REPEAT_10000(DECLARE_RETURN);
+
 #endif
-- 
2.34.1

[PATCH 5.16 127/203] ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit dc0075ba7f387fe4c48a8c674b11ab6f374a6acc ]

Commit 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while
suspended to idle") made acpi_ec_dispatch_gpe() check
pm_wakeup_pending(), but that is before canceling the SCI wakeup,
so pm_wakeup_pending() is always true.  This causes the loop in
acpi_ec_dispatch_gpe() to always terminate after one iteration which
may not be correct.

Address this issue by canceling the SCI wakeup earlier, from
acpi_ec_dispatch_gpe() itself.

Fixes: 4a9af6cac050 ("ACPI: EC: Rework flushing of EC work while suspended to idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c    | 10 ++++++++++
 drivers/acpi/sleep.c | 14 ++++----------
 2 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index b9c44e6c5e400..1712990bf2ad8 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -2051,6 +2051,16 @@ bool acpi_ec_dispatch_gpe(void)
 	if (acpi_any_gpe_status_set(first_ec->gpe))
 		return true;
 
+	/*
+	 * Cancel the SCI wakeup and process all pending events in case there
+	 * are any wakeup ones in there.
+	 *
+	 * Note that if any non-EC GPEs are active at this point, the SCI will
+	 * retrigger after the rearming in acpi_s2idle_wake(), so no events
+	 * should be missed by canceling the wakeup here.
+	 */
+	pm_system_cancel_wakeup();
+
 	/*
 	 * Dispatch the EC GPE in-band, but do not report wakeup in any case
 	 * to allow the caller to process events properly after that.
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 9f237dc9d45fc..8513410ca2fc2 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -739,21 +739,15 @@ bool acpi_s2idle_wake(void)
 			return true;
 		}
 
-		/* Check non-EC GPE wakeups and dispatch the EC GPE. */
+		/*
+		 * Check non-EC GPE wakeups and if there are none, cancel the
+		 * SCI-related wakeup and dispatch the EC GPE.
+		 */
 		if (acpi_ec_dispatch_gpe()) {
 			pm_pr_dbg("ACPI non-EC GPE wakeup\n");
 			return true;
 		}
 
-		/*
-		 * Cancel the SCI wakeup and process all pending events in case
-		 * there are any wakeup ones in there.
-		 *
-		 * Note that if any non-EC GPEs are active at this point, the
-		 * SCI will retrigger after the rearming below, so no events
-		 * should be missed by canceling the wakeup here.
-		 */
-		pm_system_cancel_wakeup();
 		acpi_os_wait_events_complete();
 
 		/*
-- 
2.34.1

[PATCH 5.16 128/203] gpiolib: Never return internal error codes to user space

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 95a4eed7dd5b7c1c3664a626174290686ddbee9f ]

Currently it's possible that character device interface may return
the error codes which are not supposed to be seen by user space.
In this case it's EPROBE_DEFER.

Wrap it to return -ENODEV instead as sysfs does.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Reported-by: Suresh Balakrishnan <suresh.balakrishnan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-cdev.c  |  6 +++---
 drivers/gpio/gpiolib-sysfs.c |  7 ++-----
 drivers/gpio/gpiolib.h       | 12 ++++++++++++
 3 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index c7b5446d01fd2..ffa0256cad5a0 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -330,7 +330,7 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 			goto out_free_lh;
 		}
 
-		ret = gpiod_request(desc, lh->label);
+		ret = gpiod_request_user(desc, lh->label);
 		if (ret)
 			goto out_free_lh;
 		lh->descs[i] = desc;
@@ -1378,7 +1378,7 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip)
 			goto out_free_linereq;
 		}
 
-		ret = gpiod_request(desc, lr->label);
+		ret = gpiod_request_user(desc, lr->label);
 		if (ret)
 			goto out_free_linereq;
 
@@ -1764,7 +1764,7 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 		}
 	}
 
-	ret = gpiod_request(desc, le->label);
+	ret = gpiod_request_user(desc, le->label);
 	if (ret)
 		goto out_free_le;
 	le->desc = desc;
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index 4098bc7f88b7e..44c1ad51b3fe9 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -475,12 +475,9 @@ static ssize_t export_store(struct class *class,
 	 * they may be undone on its behalf too.
 	 */
 
-	status = gpiod_request(desc, "sysfs");
-	if (status) {
-		if (status == -EPROBE_DEFER)
-			status = -ENODEV;
+	status = gpiod_request_user(desc, "sysfs");
+	if (status)
 		goto done;
-	}
 
 	status = gpiod_set_transitory(desc, false);
 	if (!status) {
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 30bc3f80f83e6..c31f4626915de 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -135,6 +135,18 @@ struct gpio_desc {
 
 int gpiod_request(struct gpio_desc *desc, const char *label);
 void gpiod_free(struct gpio_desc *desc);
+
+static inline int gpiod_request_user(struct gpio_desc *desc, const char *label)
+{
+	int ret;
+
+	ret = gpiod_request(desc, label);
+	if (ret == -EPROBE_DEFER)
+		ret = -ENODEV;
+
+	return ret;
+}
+
 int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 		unsigned long lflags, enum gpiod_flags dflags);
 int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce);
-- 
2.34.1

[PATCH 5.16 129/203] gpio: sifive: use the correct register to read output values

[Greg Kroah-Hartman]

From: Niklas Cassel <niklas.cassel@wdc.com>

[ Upstream commit cc38ef936840ac29204d806deb4d1836ec509594 ]

Setting the output of a GPIO to 1 using gpiod_set_value(), followed by
reading the same GPIO using gpiod_get_value(), will currently yield an
incorrect result.

This is because the SiFive GPIO device stores the output values in reg_set,
not reg_dat.

Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the
generic driver reads the correct register.

Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: added the Fixes tag]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-sifive.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c
index 403f9e833d6a3..7d82388b4ab7c 100644
--- a/drivers/gpio/gpio-sifive.c
+++ b/drivers/gpio/gpio-sifive.c
@@ -223,7 +223,7 @@ static int sifive_gpio_probe(struct platform_device *pdev)
 			 NULL,
 			 chip->base + SIFIVE_GPIO_OUTPUT_EN,
 			 chip->base + SIFIVE_GPIO_INPUT_EN,
-			 0);
+			 BGPIOF_READ_OUTPUT_REG_SET);
 	if (ret) {
 		dev_err(dev, "unable to init generic GPIO\n");
 		return ret;
-- 
2.34.1

[PATCH 5.16 130/203] fbcon: Avoid cap set but not used warning

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 50b10528aad568c95f772039d4b3093b4aea7439 ]

Fix this kernel test robot warning:

  drivers/video/fbdev/core/fbcon.c: In function 'fbcon_init':
  drivers/video/fbdev/core/fbcon.c:1028:6: warning: variable 'cap' set but not used [-Wunused-but-set-variable]

The cap variable is only used when CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
is enabled. Drop the temporary variable and use info->flags instead.

Fixes: 87ab9f6b7417 ("Revert "fbcon: Disable accelerated scrolling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YgFB4xqI+As196FR@p100
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbcon.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index f36829eeb5a93..2fc1b80a26ad9 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1025,7 +1025,7 @@ static void fbcon_init(struct vc_data *vc, int init)
 	struct vc_data *svc = *default_mode;
 	struct fbcon_display *t, *p = &fb_display[vc->vc_num];
 	int logo = 1, new_rows, new_cols, rows, cols;
-	int cap, ret;
+	int ret;
 
 	if (WARN_ON(info_idx == -1))
 	    return;
@@ -1034,7 +1034,6 @@ static void fbcon_init(struct vc_data *vc, int init)
 		con2fb_map[vc->vc_num] = info_idx;
 
 	info = registered_fb[con2fb_map[vc->vc_num]];
-	cap = info->flags;
 
 	if (logo_shown < 0 && console_loglevel <= CONSOLE_LOGLEVEL_QUIET)
 		logo_shown = FBCON_LOGO_DONTSHOW;
@@ -1137,8 +1136,8 @@ static void fbcon_init(struct vc_data *vc, int init)
 	ops->graphics = 0;
 
 #ifdef CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
-	if ((cap & FBINFO_HWACCEL_COPYAREA) &&
-	    !(cap & FBINFO_HWACCEL_DISABLED))
+	if ((info->flags & FBINFO_HWACCEL_COPYAREA) &&
+	    !(info->flags & FBINFO_HWACCEL_DISABLED))
 		p->scrollmode = SCROLL_MOVE;
 	else /* default to something safe */
 		p->scrollmode = SCROLL_REDRAW;
-- 
2.34.1

[PATCH 5.16 131/203] SUNRPC: lock against ->sock changing during sysfs read

[Greg Kroah-Hartman]

From: NeilBrown <neilb@suse.de>

[ Upstream commit b49ea673e119f59c71645e2f65b3ccad857c90ee ]

->sock can be set to NULL asynchronously unless ->recv_mutex is held.
So it is important to hold that mutex.  Otherwise a sysfs read can
trigger an oops.
Commit 17f09d3f619a ("SUNRPC: Check if the xprt is connected before
handling sysfs reads") appears to attempt to fix this problem, but it
only narrows the race window.

Fixes: 17f09d3f619a ("SUNRPC: Check if the xprt is connected before handling sysfs reads")
Fixes: a8482488a7d6 ("SUNRPC query transport's source port")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/sysfs.c    | 5 ++++-
 net/sunrpc/xprtsock.c | 7 ++++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/sysfs.c b/net/sunrpc/sysfs.c
index 8f309bcdf84fe..0c28280dd3bcb 100644
--- a/net/sunrpc/sysfs.c
+++ b/net/sunrpc/sysfs.c
@@ -115,11 +115,14 @@ static ssize_t rpc_sysfs_xprt_srcaddr_show(struct kobject *kobj,
 	}
 
 	sock = container_of(xprt, struct sock_xprt, xprt);
-	if (kernel_getsockname(sock->sock, (struct sockaddr *)&saddr) < 0)
+	mutex_lock(&sock->recv_mutex);
+	if (sock->sock == NULL ||
+	    kernel_getsockname(sock->sock, (struct sockaddr *)&saddr) < 0)
 		goto out;
 
 	ret = sprintf(buf, "%pISc\n", &saddr);
 out:
+	mutex_unlock(&sock->recv_mutex);
 	xprt_put(xprt);
 	return ret + 1;
 }
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index d8ee06a9650a1..03770e56df361 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1641,7 +1641,12 @@ static int xs_get_srcport(struct sock_xprt *transport)
 unsigned short get_srcport(struct rpc_xprt *xprt)
 {
 	struct sock_xprt *sock = container_of(xprt, struct sock_xprt, xprt);
-	return xs_sock_getport(sock->sock);
+	unsigned short ret = 0;
+	mutex_lock(&sock->recv_mutex);
+	if (sock->sock)
+		ret = xs_sock_getport(sock->sock);
+	mutex_unlock(&sock->recv_mutex);
+	return ret;
 }
 EXPORT_SYMBOL(get_srcport);
 
-- 
2.34.1

[PATCH 5.16 132/203] gve: Recording rx queue before sending to napi

[Greg Kroah-Hartman]

From: Tao Liu <xliutaox@google.com>

[ Upstream commit 084cbb2ec3af2d23be9de65fcc9493e21e265859 ]

This caused a significant performance degredation when using generic XDP
with multiple queues.

Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Tao Liu <xliutaox@google.com>
Link: https://lore.kernel.org/r/20220207175901.2486596-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/google/gve/gve_rx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/google/gve/gve_rx.c b/drivers/net/ethernet/google/gve/gve_rx.c
index 04a08904305a9..3453e565472c1 100644
--- a/drivers/net/ethernet/google/gve/gve_rx.c
+++ b/drivers/net/ethernet/google/gve/gve_rx.c
@@ -609,6 +609,7 @@ static bool gve_rx(struct gve_rx_ring *rx, netdev_features_t feat,
 
 	*packet_size_bytes = skb->len + (skb->protocol ? ETH_HLEN : 0);
 	*work_done = work_cnt;
+	skb_record_rx_queue(skb, rx->q_num);
 	if (skb_is_nonlinear(skb))
 		napi_gro_frags(napi);
 	else
-- 
2.34.1

[PATCH 5.16 133/203] bonding: pair enable_port with slave_arr_updates

[Greg Kroah-Hartman]

From: Mahesh Bandewar <maheshb@google.com>

[ Upstream commit 23de0d7b6f0e3f9a6283a882594c479949da1120 ]

When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.

I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.

Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_3ad.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 6006c2e8fa2bc..9fd1d6cba3cda 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1021,8 +1021,8 @@ static void ad_mux_machine(struct port *port, bool *update_slave_arr)
 				if (port->aggregator &&
 				    port->aggregator->is_active &&
 				    !__port_is_enabled(port)) {
-
 					__enable_port(port);
+					*update_slave_arr = true;
 				}
 			}
 			break;
@@ -1779,6 +1779,7 @@ static void ad_agg_selection_logic(struct aggregator *agg,
 			     port = port->next_port_in_aggregator) {
 				__enable_port(port);
 			}
+			*update_slave_arr = true;
 		}
 	}
 
-- 
2.34.1

[PATCH 5.16 134/203] net: dsa: mv88e6xxx: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit f53a2ce893b2c7884ef94471f170839170a4eba0 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.

systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
 mdiobus_free+0x44/0x50
 devm_mdiobus_free+0x10/0x20
 devres_release_all+0xa0/0x100
 __device_release_driver+0x190/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x4c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 kernel_power_off+0x34/0x6c
 __do_sys_reboot+0x15c/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Rafael Richter <Rafael.Richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index cd8462d1e27c0..fcd648d0f6372 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3415,7 +3415,7 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 			return err;
 	}
 
-	bus = devm_mdiobus_alloc_size(chip->dev, sizeof(*mdio_bus));
+	bus = mdiobus_alloc_size(sizeof(*mdio_bus));
 	if (!bus)
 		return -ENOMEM;
 
@@ -3440,14 +3440,14 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 	if (!external) {
 		err = mv88e6xxx_g2_irq_mdio_setup(chip, bus);
 		if (err)
-			return err;
+			goto out;
 	}
 
 	err = of_mdiobus_register(bus, np);
 	if (err) {
 		dev_err(chip->dev, "Cannot register MDIO bus (%d)\n", err);
 		mv88e6xxx_g2_irq_mdio_free(chip, bus);
-		return err;
+		goto out;
 	}
 
 	if (external)
@@ -3456,6 +3456,10 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 		list_add(&mdio_bus->list, &chip->mdios);
 
 	return 0;
+
+out:
+	mdiobus_free(bus);
+	return err;
 }
 
 static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
@@ -3471,6 +3475,7 @@ static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
 			mv88e6xxx_g2_irq_mdio_free(chip, bus);
 
 		mdiobus_unregister(bus);
+		mdiobus_free(bus);
 	}
 }
 
-- 
2.34.1

[PATCH 5.16 135/203] net: dsa: ar9331: register the mdiobus under devres

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 50facd86e9fbc4b93fe02e5fe05776047f45dbfb ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/qca/ar9331.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index da0d7e68643a9..c39de2a4c1fe0 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -378,7 +378,7 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
 	if (!mnp)
 		return -ENODEV;
 
-	ret = of_mdiobus_register(mbus, mnp);
+	ret = devm_of_mdiobus_register(dev, mbus, mnp);
 	of_node_put(mnp);
 	if (ret)
 		return ret;
@@ -1091,7 +1091,6 @@ static void ar9331_sw_remove(struct mdio_device *mdiodev)
 	}
 
 	irq_domain_remove(priv->irqdomain);
-	mdiobus_unregister(priv->mbus);
 	dsa_unregister_switch(&priv->ds);
 
 	reset_control_assert(priv->sw_reset);
-- 
2.34.1

[PATCH 5.16 136/203] net: dsa: bcm_sf2: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 08f1a20822349004bb9cc1b153ecb516e9f2889d ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/bcm_sf2.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 13aa43b5cffd9..1502d200682f8 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -584,7 +584,7 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
 	get_device(&priv->master_mii_bus->dev);
 	priv->master_mii_dn = dn;
 
-	priv->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
+	priv->slave_mii_bus = mdiobus_alloc();
 	if (!priv->slave_mii_bus) {
 		of_node_put(dn);
 		return -ENOMEM;
@@ -644,8 +644,10 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
 	}
 
 	err = mdiobus_register(priv->slave_mii_bus);
-	if (err && dn)
+	if (err && dn) {
+		mdiobus_free(priv->slave_mii_bus);
 		of_node_put(dn);
+	}
 
 	return err;
 }
@@ -653,6 +655,7 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
 static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv)
 {
 	mdiobus_unregister(priv->slave_mii_bus);
+	mdiobus_free(priv->slave_mii_bus);
 	of_node_put(priv->master_mii_dn);
 }
 
-- 
2.34.1

[PATCH 5.16 137/203] net: dsa: felix: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 209bdb7ec6a28c7cdf580a0a98afbc9fc3b98932 ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 45c5ec7a83eaf..12c2acbc2427b 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1064,7 +1064,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 		return PTR_ERR(hw);
 	}
 
-	bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
+	bus = mdiobus_alloc_size(sizeof(*mdio_priv));
 	if (!bus)
 		return -ENOMEM;
 
@@ -1084,6 +1084,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 	rc = mdiobus_register(bus);
 	if (rc < 0) {
 		dev_err(dev, "failed to register MDIO bus\n");
+		mdiobus_free(bus);
 		return rc;
 	}
 
@@ -1133,6 +1134,7 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot)
 		lynx_pcs_destroy(pcs);
 	}
 	mdiobus_unregister(felix->imdio);
+	mdiobus_free(felix->imdio);
 }
 
 static void vsc9959_sched_speed_set(struct ocelot *ocelot, int port,
-- 
2.34.1

[PATCH 5.16 138/203] net: dsa: ocelot: seville: utilize of_mdiobus_register

[Greg Kroah-Hartman]

From: Colin Foster <colin.foster@in-advantage.com>

[ Upstream commit 5186c4a05b9713138b762a49467a8ab9753cdb36 ]

Switch seville to use of_mdiobus_register(bus, NULL) instead of just
mdiobus_register. This code is about to be pulled into a separate module
that can optionally define ports by the device_node.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/seville_vsc9953.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 92eae63150eae..5ee7d1592a721 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -10,6 +10,7 @@
 #include <linux/pcs-lynx.h>
 #include <linux/dsa/ocelot.h>
 #include <linux/iopoll.h>
+#include <linux/of_mdio.h>
 #include "felix.h"
 
 #define MSCC_MIIM_CMD_OPR_WRITE			BIT(1)
@@ -1108,7 +1109,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev));
 
 	/* Needed in order to initialize the bus mutex lock */
-	rc = mdiobus_register(bus);
+	rc = of_mdiobus_register(bus, NULL);
 	if (rc < 0) {
 		dev_err(dev, "failed to register MDIO bus\n");
 		return rc;
-- 
2.34.1

[PATCH 5.16 139/203] net: dsa: seville: register the mdiobus under devres

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit bd488afc3b39e045ba71aab472233f2a78726e7b ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Seville VSC9959 switch is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the seville switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The seville driver has a code structure that could accommodate both the
mdiobus_unregister and mdiobus_free calls, but it has an external
dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls
devm_mdiobus_alloc_size() on its behalf. So rather than restructuring
that, and exporting yet one more symbol mscc_miim_teardown(), let's work
with devres and replace of_mdiobus_register with the devres variant.
When we use all-devres, we can ensure that devres doesn't free a
still-registered bus (it either runs both callbacks, or none).

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/seville_vsc9953.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 5ee7d1592a721..40d6d1f2c724f 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1109,7 +1109,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev));
 
 	/* Needed in order to initialize the bus mutex lock */
-	rc = of_mdiobus_register(bus, NULL);
+	rc = devm_of_mdiobus_register(dev, bus, NULL);
 	if (rc < 0) {
 		dev_err(dev, "failed to register MDIO bus\n");
 		return rc;
@@ -1161,7 +1161,8 @@ static void vsc9953_mdio_bus_free(struct ocelot *ocelot)
 		mdio_device_free(pcs->mdio);
 		lynx_pcs_destroy(pcs);
 	}
-	mdiobus_unregister(felix->imdio);
+
+	/* mdiobus_unregister and mdiobus_free handled by devres */
 }
 
 static const struct felix_info seville_info_vsc9953 = {
-- 
2.34.1

[PATCH 5.16 140/203] net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 9ffe3d09e32da45bb5a29cf2e80ec8d7534010c5 ]

Nobody in this driver calls mdiobus_unregister(), which is necessary if
mdiobus_register() completes successfully. So if the devres callbacks
that free the mdiobus get invoked (this is the case when unbinding the
driver), mdiobus_free() will BUG if the mdiobus is still registered,
which it is.

My speculation is that this is due to the fact that prior to commit
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
from June 2020, _devm_mdiobus_free() used to call mdiobus_unregister().
But at the time that the mt7530 support was introduced in May 2021, the
API was already changed. It's therefore likely that the blamed patch was
developed on an older tree, and incorrectly adapted to net-next. This
makes the Fixes: tag correct.

Fix the problem by using the devres variant of mdiobus_register.

Fixes: ba751e28d442 ("net: dsa: mt7530: add interrupt support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9890672a206d0..fb59efc7f9266 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2066,7 +2066,7 @@ mt7530_setup_mdio(struct mt7530_priv *priv)
 	if (priv->irq)
 		mt7530_setup_mdio_irq(priv);
 
-	ret = mdiobus_register(bus);
+	ret = devm_mdiobus_register(dev, bus);
 	if (ret) {
 		dev_err(dev, "failed to register MDIO bus: %d\n", ret);
 		if (priv->irq)
-- 
2.34.1

[PATCH 5.16 141/203] net: dsa: lantiq_gswip: dont use devres for mdiobus

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/lantiq_gswip.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 7056d98d8177b..0909b05d02133 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -498,8 +498,9 @@ static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg)
 static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 {
 	struct dsa_switch *ds = priv->ds;
+	int err;
 
-	ds->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
+	ds->slave_mii_bus = mdiobus_alloc();
 	if (!ds->slave_mii_bus)
 		return -ENOMEM;
 
@@ -512,7 +513,11 @@ static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 	ds->slave_mii_bus->parent = priv->dev;
 	ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
 
-	return of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	err = of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	if (err)
+		mdiobus_free(ds->slave_mii_bus);
+
+	return err;
 }
 
 static int gswip_pce_table_entry_read(struct gswip_priv *priv,
@@ -2186,8 +2191,10 @@ static int gswip_probe(struct platform_device *pdev)
 	gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
 	dsa_unregister_switch(priv->ds);
 mdio_bus:
-	if (mdio_np)
+	if (mdio_np) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
+	}
 put_mdio_node:
 	of_node_put(mdio_np);
 	for (i = 0; i < priv->num_gphy_fw; i++)
@@ -2210,6 +2217,7 @@ static int gswip_remove(struct platform_device *pdev)
 
 	if (priv->ds->slave_mii_bus) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
 		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
 	}
 
-- 
2.34.1

[PATCH 5.16 142/203] ibmvnic: dont release napi in __ibmvnic_open()

[Greg Kroah-Hartman]

From: Sukadev Bhattiprolu <sukadev@linux.ibm.com>

[ Upstream commit 61772b0908c640d0309c40f7d41d062ca4e979fa ]

If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.

If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.

This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:

	[102056] ibmvnic 30000003 env3: Disabling rx_scrq[6] irq
	[102056] ibmvnic 30000003 env3: Disabling rx_scrq[7] irq
	[102056] ibmvnic 30000003 env3: Replenished 8 pools
	Kernel attempted to read user page (10) - exploit attempt? (uid: 0)
	BUG: Kernel NULL pointer dereference on read at 0x00000010
	Faulting instruction address: 0xc000000000a3c840
	Oops: Kernel access of bad area, sig: 11 [#1]
	LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
	...
	CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted 5.16.0-rc5-autotest-g6441998e2e37 #1
	Workqueue: events_long __ibmvnic_reset [ibmvnic]
	NIP:  c000000000a3c840 LR: c0080000029b5378 CTR: c000000000a3c820
	REGS: c0000000548e37e0 TRAP: 0300   Not tainted  (5.16.0-rc5-autotest-g6441998e2e37)
	MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28248484  XER: 00000004
	CFAR: c0080000029bdd24 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
	GPR00: c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000
	...
	NIP [c000000000a3c840] napi_enable+0x20/0xc0
	LR [c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic]
	Call Trace:
	[c0000000548e3a80] [0000000000000006] 0x6 (unreliable)
	[c0000000548e3ab0] [c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic]
	[c0000000548e3b40] [c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic]
	[c0000000548e3c60] [c000000000176228] process_one_work+0x288/0x570
	[c0000000548e3d00] [c000000000176588] worker_thread+0x78/0x660
	[c0000000548e3da0] [c0000000001822f0] kthread+0x1c0/0x1d0
	[c0000000548e3e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
	Instruction dump:
	7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010
	38a0fff6 e92d1100 f9210028 39200000 <e9030010> f9010020 60420000 e9210020
	---[ end trace 5f8033b08fd27706 ]---

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220208001918.900602-1-sukadev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 682a440151a87..d5d33325a413e 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -110,6 +110,7 @@ static void ibmvnic_tx_scrq_clean_buffer(struct ibmvnic_adapter *adapter,
 					 struct ibmvnic_sub_crq_queue *tx_scrq);
 static void free_long_term_buff(struct ibmvnic_adapter *adapter,
 				struct ibmvnic_long_term_buff *ltb);
+static void ibmvnic_disable_irqs(struct ibmvnic_adapter *adapter);
 
 struct ibmvnic_stat {
 	char name[ETH_GSTRING_LEN];
@@ -1418,7 +1419,7 @@ static int __ibmvnic_open(struct net_device *netdev)
 	rc = set_link_state(adapter, IBMVNIC_LOGICAL_LNK_UP);
 	if (rc) {
 		ibmvnic_napi_disable(adapter);
-		release_resources(adapter);
+		ibmvnic_disable_irqs(adapter);
 		return rc;
 	}
 
@@ -1468,9 +1469,6 @@ static int ibmvnic_open(struct net_device *netdev)
 		rc = init_resources(adapter);
 		if (rc) {
 			netdev_err(netdev, "failed to initialize resources\n");
-			release_resources(adapter);
-			release_rx_pools(adapter);
-			release_tx_pools(adapter);
 			goto out;
 		}
 	}
@@ -1487,6 +1485,13 @@ static int ibmvnic_open(struct net_device *netdev)
 		adapter->state = VNIC_OPEN;
 		rc = 0;
 	}
+
+	if (rc) {
+		release_resources(adapter);
+		release_rx_pools(adapter);
+		release_tx_pools(adapter);
+	}
+
 	return rc;
 }
 
-- 
2.34.1

[PATCH 5.16 143/203] net: ethernet: litex: Add the dependency on HAS_IOMEM

[Greg Kroah-Hartman]

From: Cai Huoqing <cai.huoqing@linux.dev>

[ Upstream commit 2427f03fb42f9dc14c53108f2c9b5563eb37e770 ]

The LiteX driver uses devm io function API which
needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM.

Fixes: ee7da21ac4c3 ("net: Add driver for LiteX's LiteETH network interface")
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220208013308.6563-1-cai.huoqing@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/litex/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/litex/Kconfig b/drivers/net/ethernet/litex/Kconfig
index f99adbf26ab4e..04345b929d8e5 100644
--- a/drivers/net/ethernet/litex/Kconfig
+++ b/drivers/net/ethernet/litex/Kconfig
@@ -17,7 +17,7 @@ if NET_VENDOR_LITEX
 
 config LITEX_LITEETH
 	tristate "LiteX Ethernet support"
-	depends on OF
+	depends on OF && HAS_IOMEM
 	help
 	  If you wish to compile a kernel for hardware with a LiteX LiteEth
 	  device then you should answer Y to this.
-- 
2.34.1

[PATCH 5.16 144/203] ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 5611a00697c8ecc5aad04392bea629e9d6a20463 ]

ip[6]mr_free_table() can only be called under RTNL lock.

RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4
R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000
FS:  00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
 ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
 ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
 ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
 ops_init+0xaf/0x470 net/core/net_namespace.c:140
 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
 copy_process+0x2e0c/0x7300 kernel/fork.c:2167
 kernel_clone+0xe7/0xab0 kernel/fork.c:2555
 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038
RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059
RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000
RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300
R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000
 </TASK>

Fixes: f243e5a7859a ("ipmr,ip6mr: call ip6mr_free_table() on failure path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220208053451.2885398-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ipmr.c  | 2 ++
 net/ipv6/ip6mr.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 2dda856ca2602..aea29d97f8dfa 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -261,7 +261,9 @@ static int __net_init ipmr_rules_init(struct net *net)
 	return 0;
 
 err2:
+	rtnl_lock();
 	ipmr_free_table(mrt);
+	rtnl_unlock();
 err1:
 	fib_rules_unregister(ops);
 	return err;
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 36ed9efb88254..6a4065d81aa91 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -248,7 +248,9 @@ static int __net_init ip6mr_rules_init(struct net *net)
 	return 0;
 
 err2:
+	rtnl_lock();
 	ip6mr_free_table(mrt);
+	rtnl_unlock();
 err1:
 	fib_rules_unregister(ops);
 	return err;
-- 
2.34.1

[PATCH 5.16 145/203] nfp: flower: fix ida_idx not being released

[Greg Kroah-Hartman]

From: Louis Peens <louis.peens@corigine.com>

[ Upstream commit 7db788ad627aabff2b74d4f1a3b68516d0fee0d7 ]

When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT
that gets set if nfp_flower_is_supported_bridge is true is not taken
into account. Consequently the path that should release the ida_index
in cleanup is never triggered, causing messages like:

    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.

after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to
new tunnel flows not being offloaded.

Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if
the port is of type OTHER.

Fixes: 2e0bc7f3cb55 ("nfp: flower: encode mac indexes with pre-tunnel rule check")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/netronome/nfp/flower/tunnel_conf.c  | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
index dfb4468fe287a..0a326e04e6923 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
@@ -1011,6 +1011,7 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 	struct nfp_flower_repr_priv *repr_priv;
 	struct nfp_tun_offloaded_mac *entry;
 	struct nfp_repr *repr;
+	u16 nfp_mac_idx;
 	int ida_idx;
 
 	entry = nfp_tunnel_lookup_offloaded_macs(app, mac);
@@ -1029,8 +1030,6 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 		entry->bridge_count--;
 
 		if (!entry->bridge_count && entry->ref_count) {
-			u16 nfp_mac_idx;
-
 			nfp_mac_idx = entry->index & ~NFP_TUN_PRE_TUN_IDX_BIT;
 			if (__nfp_tunnel_offload_mac(app, mac, nfp_mac_idx,
 						     false)) {
@@ -1046,7 +1045,6 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 
 	/* If MAC is now used by 1 repr set the offloaded MAC index to port. */
 	if (entry->ref_count == 1 && list_is_singular(&entry->repr_list)) {
-		u16 nfp_mac_idx;
 		int port, err;
 
 		repr_priv = list_first_entry(&entry->repr_list,
@@ -1074,8 +1072,14 @@ nfp_tunnel_del_shared_mac(struct nfp_app *app, struct net_device *netdev,
 	WARN_ON_ONCE(rhashtable_remove_fast(&priv->tun.offloaded_macs,
 					    &entry->ht_node,
 					    offloaded_macs_params));
+
+	if (nfp_flower_is_supported_bridge(netdev))
+		nfp_mac_idx = entry->index & ~NFP_TUN_PRE_TUN_IDX_BIT;
+	else
+		nfp_mac_idx = entry->index;
+
 	/* If MAC has global ID then extract and free the ida entry. */
-	if (nfp_tunnel_is_mac_idx_global(entry->index)) {
+	if (nfp_tunnel_is_mac_idx_global(nfp_mac_idx)) {
 		ida_idx = nfp_tunnel_get_ida_from_global_mac_idx(entry->index);
 		ida_simple_remove(&priv->tun.mac_off_ids, ida_idx);
 	}
-- 
2.34.1

[PATCH 5.16 146/203] net: do not keep the dst cache when uncloning an skb dst and its metadata

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit cfc56f85e72f5b9c5c5be26dc2b16518d36a7868 ]

When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.

The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.

In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).

Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/dst_metadata.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/net/dst_metadata.h b/include/net/dst_metadata.h
index 14efa0ded75dd..b997e0c1e3627 100644
--- a/include/net/dst_metadata.h
+++ b/include/net/dst_metadata.h
@@ -123,6 +123,19 @@ static inline struct metadata_dst *tun_dst_unclone(struct sk_buff *skb)
 
 	memcpy(&new_md->u.tun_info, &md_dst->u.tun_info,
 	       sizeof(struct ip_tunnel_info) + md_size);
+#ifdef CONFIG_DST_CACHE
+	/* Unclone the dst cache if there is one */
+	if (new_md->u.tun_info.dst_cache.cache) {
+		int ret;
+
+		ret = dst_cache_init(&new_md->u.tun_info.dst_cache, GFP_ATOMIC);
+		if (ret) {
+			metadata_dst_free(new_md);
+			return ERR_PTR(ret);
+		}
+	}
+#endif
+
 	skb_dst_drop(skb);
 	dst_hold(&new_md->dst);
 	skb_dst_set(skb, &new_md->dst);
-- 
2.34.1

[PATCH 5.16 147/203] net: fix a memleak when uncloning an skb dst and its metadata

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit 9eeabdf17fa0ab75381045c867c370f4cc75a613 ]

When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.

The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.

Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.

Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/dst_metadata.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/net/dst_metadata.h b/include/net/dst_metadata.h
index b997e0c1e3627..adab27ba1ecbf 100644
--- a/include/net/dst_metadata.h
+++ b/include/net/dst_metadata.h
@@ -137,7 +137,6 @@ static inline struct metadata_dst *tun_dst_unclone(struct sk_buff *skb)
 #endif
 
 	skb_dst_drop(skb);
-	dst_hold(&new_md->dst);
 	skb_dst_set(skb, &new_md->dst);
 	return new_md;
 }
-- 
2.34.1

[PATCH 5.16 148/203] veth: fix races around rq->rx_notify_masked

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 68468d8c4cd4222a4ca1f185ab5a1c14480d078c ]

veth being NETIF_F_LLTX enabled, we need to be more careful
whenever we read/write rq->rx_notify_masked.

BUG: KCSAN: data-race in veth_xmit / veth_xmit

write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0:
 __veth_xdp_flush drivers/net/veth.c:269 [inline]
 veth_xmit+0x307/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1:
 __veth_xdp_flush drivers/net/veth.c:268 [inline]
 veth_xmit+0x2d6/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 948d4f214fde ("veth: Add driver XDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/veth.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index ecbc09cbe2590..f478fe7e2b820 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -272,9 +272,10 @@ static void __veth_xdp_flush(struct veth_rq *rq)
 {
 	/* Write ptr_ring before reading rx_notify_masked */
 	smp_mb();
-	if (!rq->rx_notify_masked) {
-		rq->rx_notify_masked = true;
-		napi_schedule(&rq->xdp_napi);
+	if (!READ_ONCE(rq->rx_notify_masked) &&
+	    napi_schedule_prep(&rq->xdp_napi)) {
+		WRITE_ONCE(rq->rx_notify_masked, true);
+		__napi_schedule(&rq->xdp_napi);
 	}
 }
 
@@ -919,8 +920,10 @@ static int veth_poll(struct napi_struct *napi, int budget)
 		/* Write rx_notify_masked before reading ptr_ring */
 		smp_store_mb(rq->rx_notify_masked, false);
 		if (unlikely(!__ptr_ring_empty(&rq->xdp_ring))) {
-			rq->rx_notify_masked = true;
-			napi_schedule(&rq->xdp_napi);
+			if (napi_schedule_prep(&rq->xdp_napi)) {
+				WRITE_ONCE(rq->rx_notify_masked, true);
+				__napi_schedule(&rq->xdp_napi);
+			}
 		}
 	}
 
-- 
2.34.1

[PATCH 5.16 149/203] net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE

[Greg Kroah-Hartman]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit bc1c3c3b10db4f37c41e6107751a8d450d9c431c ]

Fix loading of the driver when built as a module.

Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/mdio/mdio-aspeed.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c
index 966c3b4ad59d1..e2273588c75b6 100644
--- a/drivers/net/mdio/mdio-aspeed.c
+++ b/drivers/net/mdio/mdio-aspeed.c
@@ -148,6 +148,7 @@ static const struct of_device_id aspeed_mdio_of_match[] = {
 	{ .compatible = "aspeed,ast2600-mdio", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, aspeed_mdio_of_match);
 
 static struct platform_driver aspeed_mdio_driver = {
 	.driver = {
-- 
2.34.1

[PATCH 5.16 150/203] tipc: rate limit warning for received illegal binding update

[Greg Kroah-Hartman]

From: Jon Maloy <jmaloy@redhat.com>

[ Upstream commit c7223d687758462826a20e9735305d55bb874c70 ]

It would be easy to craft a message containing an illegal binding table
update operation. This is handled correctly by the code, but the
corresponding warning printout is not rate limited as is should be.
We fix this now.

Fixes: b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/name_distr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c
index bda902caa8147..8267b751a526a 100644
--- a/net/tipc/name_distr.c
+++ b/net/tipc/name_distr.c
@@ -313,7 +313,7 @@ static bool tipc_update_nametbl(struct net *net, struct distr_item *i,
 		pr_warn_ratelimited("Failed to remove binding %u,%u from %u\n",
 				    ua.sr.type, ua.sr.lower, node);
 	} else {
-		pr_warn("Unrecognized name table message received\n");
+		pr_warn_ratelimited("Unknown name table message received\n");
 	}
 	return false;
 }
-- 
2.34.1

[PATCH 5.16 151/203] net: amd-xgbe: disable interrupts during pci removal

[Greg Kroah-Hartman]

From: Raju Rangoju <Raju.Rangoju@amd.com>

[ Upstream commit 68c2d6af1f1e469544d6cbe9a601d96fb9c00e7f ]

Hardware interrupts are enabled during the pci probe, however,
they are not disabled during pci removal.

Disable all hardware interrupts during pci removal to avoid any
issues.

Fixes: e75377404726 ("amd-xgbe: Update PCI support to use new IRQ functions")
Suggested-by: Selwin Sebastian <Selwin.Sebastian@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
index 90cb55eb54665..014513ce00a14 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -418,6 +418,9 @@ static void xgbe_pci_remove(struct pci_dev *pdev)
 
 	pci_free_irq_vectors(pdata->pcidev);
 
+	/* Disable all interrupts in the hardware */
+	XP_IOWRITE(pdata, XP_INT_EN, 0x0);
+
 	xgbe_free_pdata(pdata);
 }
 
-- 
2.34.1

[PATCH 5.16 152/203] net: dsa: fix panic when DSA master device unbinds on shutdown

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit ee534378f00561207656663d93907583958339ae ]

Rafael reports that on a system with LX2160A and Marvell DSA switches,
if a reboot occurs while the DSA master (dpaa2-eth) is up, the following
panic can be seen:

systemd-shutdown[1]: Rebooting.
Unable to handle kernel paging request at virtual address 00a0000800000041
[00a0000800000041] address between user and kernel address ranges
Internal error: Oops: 96000004 [#1] PREEMPT SMP
CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32
pc : dsa_slave_netdevice_event+0x130/0x3e4
lr : raw_notifier_call_chain+0x50/0x6c
Call trace:
 dsa_slave_netdevice_event+0x130/0x3e4
 raw_notifier_call_chain+0x50/0x6c
 call_netdevice_notifiers_info+0x54/0xa0
 __dev_close_many+0x50/0x130
 dev_close_many+0x84/0x120
 unregister_netdevice_many+0x130/0x710
 unregister_netdevice_queue+0x8c/0xd0
 unregister_netdev+0x20/0x30
 dpaa2_eth_remove+0x68/0x190
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 __do_sys_reboot+0x1cc/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

It can be seen from the stack trace that the problem is that the
deregistration of the master causes a dev_close(), which gets notified
as NETDEV_GOING_DOWN to dsa_slave_netdevice_event().
But dsa_switch_shutdown() has already run, and this has unregistered the
DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to
call dev_close_many() on those slave interfaces, leading to the problem.

The previous attempt to avoid the NETDEV_GOING_DOWN on the master after
dsa_switch_shutdown() was called seems improper. Unregistering the slave
interfaces is unnecessary and unhelpful. Instead, after the slaves have
stopped being uppers of the DSA master, we can now reset to NULL the
master->dsa_ptr pointer, which will make DSA start ignoring all future
notifier events on the master.

Fixes: 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dsa/dsa2.c | 25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)

diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 826957b6442b0..7578b1350f182 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -1609,7 +1609,6 @@ EXPORT_SYMBOL_GPL(dsa_unregister_switch);
 void dsa_switch_shutdown(struct dsa_switch *ds)
 {
 	struct net_device *master, *slave_dev;
-	LIST_HEAD(unregister_list);
 	struct dsa_port *dp;
 
 	mutex_lock(&dsa2_mutex);
@@ -1620,25 +1619,13 @@ void dsa_switch_shutdown(struct dsa_switch *ds)
 		slave_dev = dp->slave;
 
 		netdev_upper_dev_unlink(master, slave_dev);
-		/* Just unlinking ourselves as uppers of the master is not
-		 * sufficient. When the master net device unregisters, that will
-		 * also call dev_close, which we will catch as NETDEV_GOING_DOWN
-		 * and trigger a dev_close on our own devices (dsa_slave_close).
-		 * In turn, that will call dev_mc_unsync on the master's net
-		 * device. If the master is also a DSA switch port, this will
-		 * trigger dsa_slave_set_rx_mode which will call dev_mc_sync on
-		 * its own master. Lockdep will complain about the fact that
-		 * all cascaded masters have the same dsa_master_addr_list_lock_key,
-		 * which it normally would not do if the cascaded masters would
-		 * be in a proper upper/lower relationship, which we've just
-		 * destroyed.
-		 * To suppress the lockdep warnings, let's actually unregister
-		 * the DSA slave interfaces too, to avoid the nonsensical
-		 * multicast address list synchronization on shutdown.
-		 */
-		unregister_netdevice_queue(slave_dev, &unregister_list);
 	}
-	unregister_netdevice_many(&unregister_list);
+
+	/* Disconnect from further netdevice notifiers on the master,
+	 * since netdev_uses_dsa() will now return false.
+	 */
+	dsa_switch_for_each_cpu_port(dp, ds)
+		dp->master->dsa_ptr = NULL;
 
 	rtnl_unlock();
 	mutex_unlock(&dsa2_mutex);
-- 
2.34.1

[PATCH 5.16 153/203] drm/amd/pm: fix hwmon node of power1_label create issue

[Greg Kroah-Hartman]

From: Yang Wang <KevinYang.Wang@amd.com>

[ Upstream commit a8b1e8636a3252daa729762b2e3cc9015cc91a5c ]

it will cause hwmon node of power1_label is not created.

v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".

Fixes: ae07970a0621d6 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/amdgpu_pm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index f8370d54100e8..d31719b3418fa 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -3451,8 +3451,7 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj,
 	     attr == &sensor_dev_attr_power2_cap_min.dev_attr.attr ||
 		 attr == &sensor_dev_attr_power2_cap.dev_attr.attr ||
 		 attr == &sensor_dev_attr_power2_cap_default.dev_attr.attr ||
-		 attr == &sensor_dev_attr_power2_label.dev_attr.attr ||
-		 attr == &sensor_dev_attr_power1_label.dev_attr.attr))
+		 attr == &sensor_dev_attr_power2_label.dev_attr.attr))
 		return 0;
 
 	return effective_mode;
-- 
2.34.1

[PATCH 5.16 154/203] mptcp: netlink: process IPv6 addrs in creating listening sockets

[Greg Kroah-Hartman]

From: Kishen Maloor <kishen.maloor@intel.com>

[ Upstream commit 029744cd4bc6e9eb3bd833b4a033348296d34645 ]

This change updates mptcp_pm_nl_create_listen_socket() to create
listening sockets bound to IPv6 addresses (where IPv6 is supported).

Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/pm_netlink.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c
index 5d305fafd0e99..5eada95dd76b3 100644
--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -878,6 +878,7 @@ static int mptcp_pm_nl_append_new_local_addr(struct pm_nl_pernet *pernet,
 static int mptcp_pm_nl_create_listen_socket(struct sock *sk,
 					    struct mptcp_pm_addr_entry *entry)
 {
+	int addrlen = sizeof(struct sockaddr_in);
 	struct sockaddr_storage addr;
 	struct mptcp_sock *msk;
 	struct socket *ssock;
@@ -902,8 +903,11 @@ static int mptcp_pm_nl_create_listen_socket(struct sock *sk,
 	}
 
 	mptcp_info2sockaddr(&entry->addr, &addr, entry->addr.family);
-	err = kernel_bind(ssock, (struct sockaddr *)&addr,
-			  sizeof(struct sockaddr_in));
+#if IS_ENABLED(CONFIG_MPTCP_IPV6)
+	if (entry->addr.family == AF_INET6)
+		addrlen = sizeof(struct sockaddr_in6);
+#endif
+	err = kernel_bind(ssock, (struct sockaddr *)&addr, addrlen);
 	if (err) {
 		pr_warn("kernel_bind error, err=%d", err);
 		goto out;
-- 
2.34.1

[PATCH 5.16 155/203] dpaa2-eth: unregister the netdev before disconnecting from the PHY

[Greg Kroah-Hartman]

From: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>

[ Upstream commit 9ccc6e0c8959a019bb40f6b18704b142c04b19a8 ]

The netdev should be unregistered before we are disconnecting from the
MAC/PHY so that the dev_close callback is called and the PHY and the
phylink workqueues are actually stopped before we are disconnecting and
destroying the phylink instance.

Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 8e643567abce2..70c8dd6cf3508 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -4523,12 +4523,12 @@ static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev)
 #ifdef CONFIG_DEBUG_FS
 	dpaa2_dbg_remove(priv);
 #endif
+
+	unregister_netdev(net_dev);
 	rtnl_lock();
 	dpaa2_eth_disconnect_mac(priv);
 	rtnl_unlock();
 
-	unregister_netdev(net_dev);
-
 	dpaa2_eth_dl_port_del(priv);
 	dpaa2_eth_dl_traps_unregister(priv);
 	dpaa2_eth_dl_free(priv);
-- 
2.34.1

[PATCH 5.16 156/203] ice: fix an error code in ice_cfg_phy_fec()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 21338d58736ef70eaae5fd75d567a358ff7902f9 ]

Propagate the error code from ice_get_link_default_override() instead
of returning success.

Fixes: ea78ce4dab05 ("ice: add link lenient and default override support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index b3066d0fea8ba..e9a0159cb8b92 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -3321,7 +3321,8 @@ ice_cfg_phy_fec(struct ice_port_info *pi, struct ice_aqc_set_phy_cfg_data *cfg,
 	    !ice_fw_supports_report_dflt_cfg(hw)) {
 		struct ice_link_default_override_tlv tlv;
 
-		if (ice_get_link_default_override(&tlv, pi))
+		status = ice_get_link_default_override(&tlv, pi);
+		if (status)
 			goto out;
 
 		if (!(tlv.options & ICE_LINK_OVERRIDE_STRICT_MODE) &&
-- 
2.34.1

[PATCH 5.16 157/203] ice: fix IPIP and SIT TSO offload

[Greg Kroah-Hartman]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit 46b699c50c0304cdbd725d7740073a7f9d5edb10 ]

The driver was avoiding offload for IPIP (at least) frames due to
parsing the inner header offsets incorrectly when trying to check
lengths.

This length check works for VXLAN frames but fails on IPIP frames
because skb_transport_offset points to the inner header in IPIP
frames, which meant the subtraction of transport_header from
inner_network_header returns a negative value (-20).

With the code before this patch, everything continued to work, but GSO
was being used to segment, causing throughputs of 1.5Gb/s per thread.
After this patch, throughput is more like 10Gb/s per thread for IPIP
traffic.

Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/ice/ice_lan_tx_rx.h    |  1 +
 drivers/net/ethernet/intel/ice/ice_main.c     | 25 +++++++++++++------
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
index d981dc6f23235..85a612838a898 100644
--- a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
+++ b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
@@ -568,6 +568,7 @@ struct ice_tx_ctx_desc {
 			(0x3FFFFULL << ICE_TXD_CTX_QW1_TSO_LEN_S)
 
 #define ICE_TXD_CTX_QW1_MSS_S	50
+#define ICE_TXD_CTX_MIN_MSS	64
 
 #define ICE_TXD_CTX_QW1_VSI_S	50
 #define ICE_TXD_CTX_QW1_VSI_M	(0x3FFULL << ICE_TXD_CTX_QW1_VSI_S)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 73c61cdb036f9..68d3de6d42218 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -8540,6 +8540,7 @@ ice_features_check(struct sk_buff *skb,
 		   struct net_device __always_unused *netdev,
 		   netdev_features_t features)
 {
+	bool gso = skb_is_gso(skb);
 	size_t len;
 
 	/* No point in doing any of this if neither checksum nor GSO are
@@ -8552,24 +8553,32 @@ ice_features_check(struct sk_buff *skb,
 	/* We cannot support GSO if the MSS is going to be less than
 	 * 64 bytes. If it is then we need to drop support for GSO.
 	 */
-	if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_size < 64))
+	if (gso && (skb_shinfo(skb)->gso_size < ICE_TXD_CTX_MIN_MSS))
 		features &= ~NETIF_F_GSO_MASK;
 
-	len = skb_network_header(skb) - skb->data;
+	len = skb_network_offset(skb);
 	if (len > ICE_TXD_MACLEN_MAX || len & 0x1)
 		goto out_rm_features;
 
-	len = skb_transport_header(skb) - skb_network_header(skb);
+	len = skb_network_header_len(skb);
 	if (len > ICE_TXD_IPLEN_MAX || len & 0x1)
 		goto out_rm_features;
 
 	if (skb->encapsulation) {
-		len = skb_inner_network_header(skb) - skb_transport_header(skb);
-		if (len > ICE_TXD_L4LEN_MAX || len & 0x1)
-			goto out_rm_features;
+		/* this must work for VXLAN frames AND IPIP/SIT frames, and in
+		 * the case of IPIP frames, the transport header pointer is
+		 * after the inner header! So check to make sure that this
+		 * is a GRE or UDP_TUNNEL frame before doing that math.
+		 */
+		if (gso && (skb_shinfo(skb)->gso_type &
+			    (SKB_GSO_GRE | SKB_GSO_UDP_TUNNEL))) {
+			len = skb_inner_network_header(skb) -
+			      skb_transport_header(skb);
+			if (len > ICE_TXD_L4LEN_MAX || len & 0x1)
+				goto out_rm_features;
+		}
 
-		len = skb_inner_transport_header(skb) -
-		      skb_inner_network_header(skb);
+		len = skb_inner_network_header_len(skb);
 		if (len > ICE_TXD_IPLEN_MAX || len & 0x1)
 			goto out_rm_features;
 	}
-- 
2.34.1

[PATCH 5.16 158/203] ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler

[Greg Kroah-Hartman]

From: Dave Ertman <david.m.ertman@intel.com>

[ Upstream commit bea1898f65b9b7096cb4e73e97c83b94718f1fa1 ]

Currently, the same handler is called for both a NETDEV_BONDING_INFO
LAG unlink notification as for a NETDEV_UNREGISTER call.  This is
causing a problem though, since the netdev_notifier_info passed has
a different structure depending on which event is passed.  The problem
manifests as a call trace from a BUG: KASAN stack-out-of-bounds error.

Fix this by creating a handler specific to NETDEV_UNREGISTER that only
is passed valid elements in the netdev_notifier_info struct for the
NETDEV_UNREGISTER event.

Also included is the removal of an unbalanced dev_put on the peer_netdev
and related braces.

Fixes: 6a8b357278f5 ("ice: Respond to a NETDEV_UNREGISTER event for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_lag.c | 34 +++++++++++++++++++-----
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lag.c b/drivers/net/ethernet/intel/ice/ice_lag.c
index e375ac849aecd..4f954db01b929 100644
--- a/drivers/net/ethernet/intel/ice/ice_lag.c
+++ b/drivers/net/ethernet/intel/ice/ice_lag.c
@@ -204,17 +204,39 @@ ice_lag_unlink(struct ice_lag *lag,
 		lag->upper_netdev = NULL;
 	}
 
-	if (lag->peer_netdev) {
-		dev_put(lag->peer_netdev);
-		lag->peer_netdev = NULL;
-	}
-
+	lag->peer_netdev = NULL;
 	ice_set_sriov_cap(pf);
 	ice_set_rdma_cap(pf);
 	lag->bonded = false;
 	lag->role = ICE_LAG_NONE;
 }
 
+/**
+ * ice_lag_unregister - handle netdev unregister events
+ * @lag: LAG info struct
+ * @netdev: netdev reporting the event
+ */
+static void ice_lag_unregister(struct ice_lag *lag, struct net_device *netdev)
+{
+	struct ice_pf *pf = lag->pf;
+
+	/* check to see if this event is for this netdev
+	 * check that we are in an aggregate
+	 */
+	if (netdev != lag->netdev || !lag->bonded)
+		return;
+
+	if (lag->upper_netdev) {
+		dev_put(lag->upper_netdev);
+		lag->upper_netdev = NULL;
+		ice_set_sriov_cap(pf);
+		ice_set_rdma_cap(pf);
+	}
+	/* perform some cleanup in case we come back */
+	lag->bonded = false;
+	lag->role = ICE_LAG_NONE;
+}
+
 /**
  * ice_lag_changeupper_event - handle LAG changeupper event
  * @lag: LAG info struct
@@ -307,7 +329,7 @@ ice_lag_event_handler(struct notifier_block *notif_blk, unsigned long event,
 		ice_lag_info_event(lag, ptr);
 		break;
 	case NETDEV_UNREGISTER:
-		ice_lag_unlink(lag, ptr);
+		ice_lag_unregister(lag, netdev);
 		break;
 	default:
 		break;
-- 
2.34.1

[PATCH 5.16 159/203] ice: Avoid RTNL lock when re-creating auxiliary device

[Greg Kroah-Hartman]

From: Dave Ertman <david.m.ertman@intel.com>

[ Upstream commit 5dbbbd01cbba831233c6ea9a3e6bfa133606d3c0 ]

If a call to re-create the auxiliary device happens in a context that has
already taken the RTNL lock, then the call flow that recreates auxiliary
device can hang if there is another attempt to claim the RTNL lock by the
auxiliary driver.

To avoid this, any call to re-create auxiliary devices that comes from
an source that is holding the RTNL lock (e.g. netdev notifier when
interface exits a bond) should execute in a separate thread.  To
accomplish this, add a flag to the PF that will be evaluated in the
service task and dealt with there.

Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice.h      | 3 ++-
 drivers/net/ethernet/intel/ice/ice_main.c | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index b2db39ee5f85c..b3e1fc6a0a8eb 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -483,6 +483,7 @@ enum ice_pf_flags {
 	ICE_FLAG_VF_TRUE_PROMISC_ENA,
 	ICE_FLAG_MDD_AUTO_RESET_VF,
 	ICE_FLAG_LINK_LENIENT_MODE_ENA,
+	ICE_FLAG_PLUG_AUX_DEV,
 	ICE_PF_FLAGS_NBITS		/* must be last */
 };
 
@@ -880,7 +881,7 @@ static inline void ice_set_rdma_cap(struct ice_pf *pf)
 	if (pf->hw.func_caps.common_cap.rdma && pf->num_rdma_msix) {
 		set_bit(ICE_FLAG_RDMA_ENA, pf->flags);
 		set_bit(ICE_FLAG_AUX_ENA, pf->flags);
-		ice_plug_aux_dev(pf);
+		set_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags);
 	}
 }
 
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 68d3de6d42218..5b4be432b60ce 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2235,6 +2235,9 @@ static void ice_service_task(struct work_struct *work)
 		return;
 	}
 
+	if (test_and_clear_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags))
+		ice_plug_aux_dev(pf);
+
 	ice_clean_adminq_subtask(pf);
 	ice_check_media_subtask(pf);
 	ice_check_for_hang_subtask(pf);
-- 
2.34.1

[PATCH 5.16 160/203] net: mscc: ocelot: fix mutex lock error during ethtool stats read

[Greg Kroah-Hartman]

From: Colin Foster <colin.foster@in-advantage.com>

[ Upstream commit 7fbf6795d127a3b1bb39b0e42579904cf6db1624 ]

An ongoing workqueue populates the stats buffer. At the same time, a user
might query the statistics. While writing to the buffer is mutex-locked,
reading from the buffer wasn't. This could lead to buggy reads by ethtool.

This patch fixes the former blamed commit, but the bug was introduced in
the latter.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 1e1caa9735f90 ("ocelot: Clean up stats update deferred work")
Fixes: a556c76adc052 ("net: mscc: Add initial Ocelot switch support")
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index ac5849436d021..02edd383dea22 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1609,12 +1609,11 @@ void ocelot_get_strings(struct ocelot *ocelot, int port, u32 sset, u8 *data)
 }
 EXPORT_SYMBOL(ocelot_get_strings);
 
+/* Caller must hold &ocelot->stats_lock */
 static void ocelot_update_stats(struct ocelot *ocelot)
 {
 	int i, j;
 
-	mutex_lock(&ocelot->stats_lock);
-
 	for (i = 0; i < ocelot->num_phys_ports; i++) {
 		/* Configure the port to read the stats from */
 		ocelot_write(ocelot, SYS_STAT_CFG_STAT_VIEW(i), SYS_STAT_CFG);
@@ -1633,8 +1632,6 @@ static void ocelot_update_stats(struct ocelot *ocelot)
 					      ~(u64)U32_MAX) + val;
 		}
 	}
-
-	mutex_unlock(&ocelot->stats_lock);
 }
 
 static void ocelot_check_stats_work(struct work_struct *work)
@@ -1643,7 +1640,9 @@ static void ocelot_check_stats_work(struct work_struct *work)
 	struct ocelot *ocelot = container_of(del_work, struct ocelot,
 					     stats_work);
 
+	mutex_lock(&ocelot->stats_lock);
 	ocelot_update_stats(ocelot);
+	mutex_unlock(&ocelot->stats_lock);
 
 	queue_delayed_work(ocelot->stats_queue, &ocelot->stats_work,
 			   OCELOT_STATS_CHECK_DELAY);
@@ -1653,12 +1652,16 @@ void ocelot_get_ethtool_stats(struct ocelot *ocelot, int port, u64 *data)
 {
 	int i;
 
+	mutex_lock(&ocelot->stats_lock);
+
 	/* check and update now */
 	ocelot_update_stats(ocelot);
 
 	/* Copy all counters */
 	for (i = 0; i < ocelot->num_stats; i++)
 		*data++ = ocelot->stats[port * ocelot->num_stats + i];
+
+	mutex_unlock(&ocelot->stats_lock);
 }
 EXPORT_SYMBOL(ocelot_get_ethtool_stats);
 
-- 
2.34.1

[PATCH 5.16 161/203] net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 51a04ebf21122d5c76a716ecd9bfc33ea44b2b39 ]

Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something
allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus)
will free the memory backing the mdio_bus as well. Therefore, the
mdio_bus->list element is freed memory, but we continue to iterate
through the list of MDIO buses using that list element.

To fix this, use the proper list iterator that handles element deletion
by keeping a copy of the list element next pointer.

Fixes: f53a2ce893b2 ("net: dsa: mv88e6xxx: don't use devres for mdiobus")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index fcd648d0f6372..70cea1b95298a 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3465,10 +3465,10 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
 
 {
-	struct mv88e6xxx_mdio_bus *mdio_bus;
+	struct mv88e6xxx_mdio_bus *mdio_bus, *p;
 	struct mii_bus *bus;
 
-	list_for_each_entry(mdio_bus, &chip->mdios, list) {
+	list_for_each_entry_safe(mdio_bus, p, &chip->mdios, list) {
 		bus = mdio_bus->bus;
 
 		if (!mdio_bus->external)
-- 
2.34.1

[PATCH 5.16 162/203] vt_ioctl: fix array_index_nospec in vt_setactivate

[Greg Kroah-Hartman]

From: Jakob Koschel <jakobkoschel@gmail.com>

commit 61cc70d9e8ef5b042d4ed87994d20100ec8896d9 upstream.

array_index_nospec ensures that an out-of-bounds value is set to zero
on the transient path. Decreasing the value by one afterwards causes
a transient integer underflow. vsa.console should be decreased first
and then sanitized with array_index_nospec.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -599,8 +599,8 @@ static int vt_setactivate(struct vt_seta
 	if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
 		return -ENXIO;
 
-	vsa.console = array_index_nospec(vsa.console, MAX_NR_CONSOLES + 1);
 	vsa.console--;
+	vsa.console = array_index_nospec(vsa.console, MAX_NR_CONSOLES);
 	console_lock();
 	ret = vc_allocate(vsa.console);
 	if (ret) {

[PATCH 5.16 163/203] vt_ioctl: add array_index_nospec to VT_ACTIVATE

[Greg Kroah-Hartman]

From: Jakob Koschel <jakobkoschel@gmail.com>

commit 28cb138f559f8c1a1395f5564f86b8bbee83631b upstream.

in vt_setactivate an almost identical code path has been patched
with array_index_nospec. In the VT_ACTIVATE path the user input
is from a system call argument instead of a usercopy.
For consistency both code paths should have the same mitigations
applied.

Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam.

Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -845,6 +845,7 @@ int vt_ioctl(struct tty_struct *tty,
 			return -ENXIO;
 
 		arg--;
+		arg = array_index_nospec(arg, MAX_NR_CONSOLES);
 		console_lock();
 		ret = vc_allocate(arg);
 		console_unlock();

[PATCH 5.16 164/203] n_tty: wake up poll(POLLRDNORM) on receiving data

[Greg Kroah-Hartman]

From: TATSUKAWA KOSUKE (立川 江介) <tatsu-ab1@nec.com>

commit c816b2e65b0e86b95011418cad334f0524fc33b8 upstream.

The poll man page says POLLRDNORM is equivalent to POLLIN when used as
an event.
$ man poll
<snip>
              POLLRDNORM
                     Equivalent to POLLIN.

However, in n_tty driver, POLLRDNORM does not return until timeout even
if there is terminal input, whereas POLLIN returns.

The following test program works until kernel-3.17, but the test stops
in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups").

[Steps to run test program]
  $ cc -o test-pollrdnorm test-pollrdnorm.c
  $ ./test-pollrdnorm
  foo          <-- Type in something from the terminal followed by [RET].
                   The string should be echoed back.

  ------------------------< test-pollrdnorm.c >------------------------
  #include <stdio.h>
  #include <errno.h>
  #include <poll.h>
  #include <unistd.h>

  void main(void)
  {
	int		n;
	unsigned char	buf[8];
	struct pollfd	fds[1] = {{ 0, POLLRDNORM, 0 }};

	n = poll(fds, 1, -1);
	if (n < 0)
		perror("poll");
	n = read(0, buf, 8);
	if (n < 0)
		perror("read");
	if (n > 0)
		write(1, buf, n);
  }
  ------------------------------------------------------------------------

The attached patch fixes this problem.  Many calls to
wake_up_interruptible_poll() in the kernel source code already specify
"POLLIN | POLLRDNORM".

Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups")
Cc: stable@vger.kernel.org
Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com>
Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/n_tty.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1369,7 +1369,7 @@ handle_newline:
 			put_tty_queue(c, ldata);
 			smp_store_release(&ldata->canon_head, ldata->read_head);
 			kill_fasync(&tty->fasync, SIGIO, POLL_IN);
-			wake_up_interruptible_poll(&tty->read_wait, EPOLLIN);
+			wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
 			return;
 		}
 	}
@@ -1589,7 +1589,7 @@ static void __receive_buf(struct tty_str
 
 	if (read_cnt(ldata)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
-		wake_up_interruptible_poll(&tty->read_wait, EPOLLIN);
+		wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
 	}
 }
 

[PATCH 5.16 165/203] eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX

[Greg Kroah-Hartman]

From: Jonas Malaco <jonas@protocubo.io>

commit c0689e46be23160d925dca95dfc411f1a0462708 upstream.

Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.

In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8.  If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows.  And this is common
when user space tries to read the entire EEPROM at once.

To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.

Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/eeprom/ee1004.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/misc/eeprom/ee1004.c
+++ b/drivers/misc/eeprom/ee1004.c
@@ -114,6 +114,9 @@ static ssize_t ee1004_eeprom_read(struct
 	if (offset + count > EE1004_PAGE_SIZE)
 		count = EE1004_PAGE_SIZE - offset;
 
+	if (count > I2C_SMBUS_BLOCK_MAX)
+		count = I2C_SMBUS_BLOCK_MAX;
+
 	return i2c_smbus_read_i2c_block_data_or_emulated(client, offset, count, buf);
 }
 

[PATCH 5.16 166/203] usb: dwc2: drd: fix soft connect when gadget is unconfigured

[Greg Kroah-Hartman]

From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87 upstream.

When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
 new high-speed USB device number ...
 device descriptor read/64, error -110

Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
 - usb_gadget_connect
   - dwc2_hsotg_pullup
     - dwc2_hsotg_core_connect

Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable@kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/drd.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -109,8 +109,10 @@ static int dwc2_drd_role_sw_set(struct u
 		already = dwc2_ovr_avalid(hsotg, true);
 	} else if (role == USB_ROLE_DEVICE) {
 		already = dwc2_ovr_bvalid(hsotg, true);
-		/* This clear DCTL.SFTDISCON bit */
-		dwc2_hsotg_core_connect(hsotg);
+		if (hsotg->enabled) {
+			/* This clear DCTL.SFTDISCON bit */
+			dwc2_hsotg_core_connect(hsotg);
+		}
 	} else {
 		if (dwc2_is_device_mode(hsotg)) {
 			if (!dwc2_ovr_bvalid(hsotg, false))

[PATCH 5.16 167/203] Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 736e8d89044c1c330967fb938fa766cd9e0d8af0 upstream.

This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.

It causes build errors as reported by the kernel test robot.

Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured")
Cc: stable@kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/drd.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -109,10 +109,8 @@ static int dwc2_drd_role_sw_set(struct u
 		already = dwc2_ovr_avalid(hsotg, true);
 	} else if (role == USB_ROLE_DEVICE) {
 		already = dwc2_ovr_bvalid(hsotg, true);
-		if (hsotg->enabled) {
-			/* This clear DCTL.SFTDISCON bit */
-			dwc2_hsotg_core_connect(hsotg);
-		}
+		/* This clear DCTL.SFTDISCON bit */
+		dwc2_hsotg_core_connect(hsotg);
 	} else {
 		if (dwc2_is_device_mode(hsotg)) {
 			if (!dwc2_ovr_bvalid(hsotg, false))

[PATCH 5.16 168/203] net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream.

ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:

 - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
   causing OOB reads and (on big-endian systems) OOB endianness flips.
 - A packet can overlap the metadata array, causing a later OOB
   endianness flip to corrupt data used by a cloned SKB that has already
   been handed off into the network stack.
 - A packet SKB can be constructed whose tail is far beyond its end,
   causing out-of-bounds heap data to be considered part of the SKB's
   data.

I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/ax88179_178a.c |   68 +++++++++++++++++++++++------------------
 1 file changed, 39 insertions(+), 29 deletions(-)

--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1467,58 +1467,68 @@ static int ax88179_rx_fixup(struct usbne
 	u16 hdr_off;
 	u32 *pkt_hdr;
 
-	/* This check is no longer done by usbnet */
-	if (skb->len < dev->net->hard_header_len)
+	/* At the end of the SKB, there's a header telling us how many packets
+	 * are bundled into this buffer and where we can find an array of
+	 * per-packet metadata (which contains elements encoded into u16).
+	 */
+	if (skb->len < 4)
 		return 0;
-
 	skb_trim(skb, skb->len - 4);
 	rx_hdr = get_unaligned_le32(skb_tail_pointer(skb));
-
 	pkt_cnt = (u16)rx_hdr;
 	hdr_off = (u16)(rx_hdr >> 16);
+
+	if (pkt_cnt == 0)
+		return 0;
+
+	/* Make sure that the bounds of the metadata array are inside the SKB
+	 * (and in front of the counter at the end).
+	 */
+	if (pkt_cnt * 2 + hdr_off > skb->len)
+		return 0;
 	pkt_hdr = (u32 *)(skb->data + hdr_off);
 
-	while (pkt_cnt--) {
+	/* Packets must not overlap the metadata array */
+	skb_trim(skb, hdr_off);
+
+	for (; ; pkt_cnt--, pkt_hdr++) {
 		u16 pkt_len;
 
 		le32_to_cpus(pkt_hdr);
 		pkt_len = (*pkt_hdr >> 16) & 0x1fff;
 
-		/* Check CRC or runt packet */
-		if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
-		    (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
-			skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-			pkt_hdr++;
-			continue;
-		}
-
-		if (pkt_cnt == 0) {
-			skb->len = pkt_len;
-			/* Skip IP alignment pseudo header */
-			skb_pull(skb, 2);
-			skb_set_tail_pointer(skb, skb->len);
-			skb->truesize = pkt_len + sizeof(struct sk_buff);
-			ax88179_rx_checksum(skb, pkt_hdr);
-			return 1;
-		}
+		if (pkt_len > skb->len)
+			return 0;
 
-		ax_skb = skb_clone(skb, GFP_ATOMIC);
-		if (ax_skb) {
+		/* Check CRC or runt packet */
+		if (((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) == 0) &&
+		    pkt_len >= 2 + ETH_HLEN) {
+			bool last = (pkt_cnt == 0);
+
+			if (last) {
+				ax_skb = skb;
+			} else {
+				ax_skb = skb_clone(skb, GFP_ATOMIC);
+				if (!ax_skb)
+					return 0;
+			}
 			ax_skb->len = pkt_len;
 			/* Skip IP alignment pseudo header */
 			skb_pull(ax_skb, 2);
 			skb_set_tail_pointer(ax_skb, ax_skb->len);
 			ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
 			ax88179_rx_checksum(ax_skb, pkt_hdr);
+
+			if (last)
+				return 1;
+
 			usbnet_skb_return(dev, ax_skb);
-		} else {
-			return 0;
 		}
 
-		skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-		pkt_hdr++;
+		/* Trim this packet away from the SKB */
+		if (!skb_pull(skb, (pkt_len + 7) & 0xFFF8))
+			return 0;
 	}
-	return 1;
 }
 
 static struct sk_buff *

[PATCH 5.16 169/203] usb: ulpi: Move of_node_put to ulpi_dev_release

[Greg Kroah-Hartman]

From: Sean Anderson <sean.anderson@seco.com>

commit 092f45b13e51666fe8ecbf2d6cd247aa7e6c1f74 upstream.

Drivers are not unbound from the device when ulpi_unregister_interface
is called. Move of_node-freeing code to ulpi_dev_release which is called
only after all users are gone.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/common/ulpi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -130,6 +130,7 @@ static const struct attribute_group *ulp
 
 static void ulpi_dev_release(struct device *dev)
 {
+	of_node_put(dev->of_node);
 	kfree(to_ulpi_dev(dev));
 }
 
@@ -299,7 +300,6 @@ EXPORT_SYMBOL_GPL(ulpi_register_interfac
  */
 void ulpi_unregister_interface(struct ulpi *ulpi)
 {
-	of_node_put(ulpi->dev.of_node);
 	device_unregister(&ulpi->dev);
 }
 EXPORT_SYMBOL_GPL(ulpi_unregister_interface);

[PATCH 5.16 170/203] usb: ulpi: Call of_node_put correctly

[Greg Kroah-Hartman]

From: Sean Anderson <sean.anderson@seco.com>

commit 0a907ee9d95e3ac35eb023d71f29eae0aaa52d1b upstream.

of_node_put should always be called on device nodes gotten from
of_get_*. Additionally, it should only be called after there are no
remaining users. To address the first issue, call of_node_put if later
steps in ulpi_register fail. To address the latter, call put_device if
device_register fails, which will call ulpi_dev_release if necessary.

Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/common/ulpi.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -248,12 +248,16 @@ static int ulpi_register(struct device *
 		return ret;
 
 	ret = ulpi_read_id(ulpi);
-	if (ret)
+	if (ret) {
+		of_node_put(ulpi->dev.of_node);
 		return ret;
+	}
 
 	ret = device_register(&ulpi->dev);
-	if (ret)
+	if (ret) {
+		put_device(&ulpi->dev);
 		return ret;
+	}
 
 	dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n",
 		ulpi->id.vendor, ulpi->id.product);

[PATCH 5.16 171/203] usb: dwc3: gadget: Prevent core from processing stale TRBs

[Greg Kroah-Hartman]

From: Udipto Goswami <quic_ugoswami@quicinc.com>

commit 117b4e96c7f362eb6459543883fc07f77662472c upstream.

With CPU re-ordering on write instructions, there might
be a chance that the HWO is set before the TRB is updated
with the new mapped buffer address.
And in the case where core is processing a list of TRBs
it is possible that it fetched the TRBs when the HWO is set
but before the buffer address is updated.
Prevent this by adding a memory barrier before the HWO
is updated to ensure that the core always process the
updated TRBs.

Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1271,6 +1271,19 @@ static void __dwc3_prepare_one_trb(struc
 	if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
 		trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id);
 
+	/*
+	 * As per data book 4.2.3.2TRB Control Bit Rules section
+	 *
+	 * The controller autonomously checks the HWO field of a TRB to determine if the
+	 * entire TRB is valid. Therefore, software must ensure that the rest of the TRB
+	 * is valid before setting the HWO field to '1'. In most systems, this means that
+	 * software must update the fourth DWORD of a TRB last.
+	 *
+	 * However there is a possibility of CPU re-ordering here which can cause
+	 * controller to observe the HWO bit set prematurely.
+	 * Add a write memory barrier to prevent CPU re-ordering.
+	 */
+	wmb();
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
 	dwc3_ep_inc_enq(dep);

[PATCH 5.16 172/203] usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition

[Greg Kroah-Hartman]

From: Adam Ford <aford173@gmail.com>

commit 459702eea6132888b5c5b64c0e9c626da4ec2493 upstream.

The support the external role switch a variety of situations were
addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE
leaves the host up which can cause some error messages when
switching from host to none, to gadget, to none, and then back
to host again.

 xhci-hcd ee000000.usb: Abort failed to stop command ring: -110
 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead
 xhci-hcd ee000000.usb: HC died; cleaning up
 usb 4-1: device not accepting address 6, error -108
 usb usb4-port1: couldn't allocate usb_device

After this happens it will not act as a host again.
Fix this by releasing the host mode when transitioning to USB_ROLE_NONE.

Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/renesas_usb3.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2378,6 +2378,8 @@ static void handle_ext_role_switch_state
 	switch (role) {
 	case USB_ROLE_NONE:
 		usb3->connection_state = USB_ROLE_NONE;
+		if (cur_role == USB_ROLE_HOST)
+			device_release_driver(host);
 		if (usb3->driver)
 			usb3_disconnect(usb3);
 		usb3_vbus_out(usb3, false);

[PATCH 5.16 173/203] USB: gadget: validate interface OS descriptor requests

[Greg Kroah-Hartman]

From: Szymon Heidrich <szymon.heidrich@gmail.com>

commit 75e5b4849b81e19e9efe1654b30d7f3151c33c2c upstream.

Stall the control endpoint in case provided index exceeds array size of
MAX_CONFIG_INTERFACES or when the retrieved function pointer is null.

Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/composite.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1975,6 +1975,9 @@ unknown:
 				if (w_index != 0x5 || (w_value >> 8))
 					break;
 				interface = w_value & 0xFF;
+				if (interface >= MAX_CONFIG_INTERFACES ||
+				    !os_desc_cfg->interface[interface])
+					break;
 				buf[6] = w_index;
 				count = count_ext_prop(os_desc_cfg,
 					interface);

[PATCH 5.16 174/203] usb: gadget: rndis: check size of RNDIS_MSG_SET command

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 38ea1eac7d88072bbffb630e2b3db83ca649b826 upstream.

Check the size of the RNDIS_MSG_SET command given to us before
attempting to respond to an invalid message size.

Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/rndis.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -637,14 +637,17 @@ static int rndis_set_response(struct rnd
 	rndis_set_cmplt_type *resp;
 	rndis_resp_t *r;
 
+	BufLength = le32_to_cpu(buf->InformationBufferLength);
+	BufOffset = le32_to_cpu(buf->InformationBufferOffset);
+	if ((BufLength > RNDIS_MAX_TOTAL_SIZE) ||
+	    (BufOffset + 8 >= RNDIS_MAX_TOTAL_SIZE))
+		    return -EINVAL;
+
 	r = rndis_add_response(params, sizeof(rndis_set_cmplt_type));
 	if (!r)
 		return -ENOMEM;
 	resp = (rndis_set_cmplt_type *)r->buf;
 
-	BufLength = le32_to_cpu(buf->InformationBufferLength);
-	BufOffset = le32_to_cpu(buf->InformationBufferOffset);
-
 #ifdef	VERBOSE_DEBUG
 	pr_debug("%s: Length: %d\n", __func__, BufLength);
 	pr_debug("%s: Offset: %d\n", __func__, BufOffset);

[PATCH 5.16 175/203] usb: gadget: f_uac2: Define specific wTerminalType

[Greg Kroah-Hartman]

From: Pavel Hofman <pavel.hofman@ivitera.com>

commit 5432184107cd0013761bdfa6cb6079527ef87b95 upstream.

Several users have reported that their Win10 does not enumerate UAC2
gadget with the existing wTerminalType set to
UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g.
https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213.
While the constant is officially defined by the USB terminal types
document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines
no undefined output terminal type in its usbaudio20.h header.

Therefore wTerminalType of EP-IN is set to
UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to
UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget.

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uac2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -203,7 +203,7 @@ static struct uac2_input_terminal_descri
 
 	.bDescriptorSubtype = UAC_INPUT_TERMINAL,
 	/* .bTerminalID = DYNAMIC */
-	.wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_UNDEFINED),
+	.wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_MICROPHONE),
 	.bAssocTerminal = 0,
 	/* .bCSourceID = DYNAMIC */
 	.iChannelNames = 0,
@@ -231,7 +231,7 @@ static struct uac2_output_terminal_descr
 
 	.bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
 	/* .bTerminalID = DYNAMIC */
-	.wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_UNDEFINED),
+	.wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_SPEAKER),
 	.bAssocTerminal = 0,
 	/* .bSourceID = DYNAMIC */
 	/* .bCSourceID = DYNAMIC */

[PATCH 5.16 176/203] usb: raw-gadget: fix handling of dual-direction-capable endpoints

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 292d2c82b105d92082c2120a44a58de9767e44f1 upstream.

Under dummy_hcd, every available endpoint is *either* IN or OUT capable.
But with some real hardware, there are endpoints that support both IN and
OUT. In particular, the PLX 2380 has four available endpoints that each
support both IN and OUT.

raw-gadget currently gets confused and thinks that any endpoint that is
usable as an IN endpoint can never be used as an OUT endpoint.

Fix it by looking at the direction in the configured endpoint descriptor
instead of looking at the hardware capabilities.

With this change, I can use the PLX 2380 with raw-gadget.

Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@vger.kernel.org>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20220126205214.2149936-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/legacy/raw_gadget.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -1004,7 +1004,7 @@ static int raw_process_ep_io(struct raw_
 		ret = -EBUSY;
 		goto out_unlock;
 	}
-	if ((in && !ep->ep->caps.dir_in) || (!in && ep->ep->caps.dir_in)) {
+	if (in != usb_endpoint_dir_in(ep->ep->desc)) {
 		dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
 		ret = -EINVAL;
 		goto out_unlock;

[PATCH 5.16 177/203] USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320

[Greg Kroah-Hartman]

From: Cameron Williams <cang1@live.co.uk>

commit fbb9b194e15a63c56c5664e76ccd0e85c6100cea upstream.

This patch adds support for the Brainboxes US-159, US-235 and US-320
USB-to-Serial devices.

Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    3 +++
 drivers/usb/serial/ftdi_sio_ids.h |    3 +++
 2 files changed, 6 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -969,6 +969,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_159_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) },
@@ -977,12 +978,14 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_235_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_320_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1506,6 +1506,9 @@
 #define BRAINBOXES_VX_023_PID		0x1003 /* VX-023 ExpressCard 1 Port RS422/485 */
 #define BRAINBOXES_VX_034_PID		0x1004 /* VX-034 ExpressCard 2 Port RS422/485 */
 #define BRAINBOXES_US_101_PID		0x1011 /* US-101 1xRS232 */
+#define BRAINBOXES_US_159_PID		0x1021 /* US-159 1xRS232 */
+#define BRAINBOXES_US_235_PID		0x1017 /* US-235 1xRS232 */
+#define BRAINBOXES_US_320_PID		0x1019 /* US-320 1xRS422/485 */
 #define BRAINBOXES_US_324_PID		0x1013 /* US-324 1xRS422/485 1Mbaud */
 #define BRAINBOXES_US_606_1_PID		0x2001 /* US-606 6 Port RS232 Serial Port 1 and 2 */
 #define BRAINBOXES_US_606_2_PID		0x2002 /* US-606 6 Port RS232 Serial Port 3 and 4 */

[PATCH 5.16 178/203] USB: serial: option: add ZTE MF286D modem

[Greg Kroah-Hartman]

From: Pawel Dembicki <paweldembicki@gmail.com>

commit d48384c7ed6c8fe4727eaa0f3048f62afd1cd715 upstream.

Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem.

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=19d2 ProdID=1485 Rev=52.87
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=MF286DZTED000000
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1649,6 +1649,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0x00, 0x00) }, /* ZTE MF871A */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff),  /* ZTE MF286D */
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },

[PATCH 5.16 179/203] USB: serial: ch341: add support for GW Instek USB2.0-Serial devices

[Greg Kroah-Hartman]

From: Stephan Brunner <s.brunner@stephan-brunner.net>

commit fa77ce201f7f2d823b07753575122d1ae5597fbe upstream.

Programmable lab power supplies made by GW Instek, such as the
GPP-2323, have a USB port exposing a serial port to control the device.

Stringing the supplied Windows driver, references to the ch341 chip are
found. Binding the existing ch341 driver to the VID/PID of the GPP-2323
("GW Instek USB2.0-Serial" as per the USB product name) works out of the
box, communication and control is now possible.

This patch should work with any GPP series power supply due to
similarities in the product line.

Signed-off-by: Stephan Brunner <s.brunner@stephan-brunner.net>
Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ch341.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -85,6 +85,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1a86, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7522) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
+	{ USB_DEVICE(0x2184, 0x0057) },
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x9986, 0x7523) },
 	{ },

[PATCH 5.16 180/203] USB: serial: cp210x: add NCR Retail IO box id

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit b50f8f09c622297d3cf46e332e17ba8adedec9af upstream.

Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane
SelfServ Checkout - R6C:

	https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c

Reported-by: Scott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -51,6 +51,7 @@ static void cp210x_enable_event_mode(str
 static void cp210x_disable_event_mode(struct usb_serial_port *port);
 
 static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0404, 0x034C) },	/* NCR Retail IO Box */
 	{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */

[PATCH 5.16 181/203] USB: serial: cp210x: add CPI Bulk Coin Recycler id

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 6ca0c6283340d819bf9c7d8e76be33c9fbd903ab upstream.

Add the device id for the Crane Payment Innovation / Money Controls Bulk
Coin Recycler:

	https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf

Reported-by: Scott Russell <Scott.Russell2@ncr.com>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -69,6 +69,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
+	{ USB_DEVICE(0x106F, 0x0003) },	/* CPI / Money Controls Bulk Coin Recycler */
 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */

[PATCH 5.16 182/203] speakup-dectlk: Restore pitch setting

[Greg Kroah-Hartman]

From: Samuel Thibault <samuel.thibault@ens-lyon.org>

commit bca828ccdd6548d24613d0cede04ada4dfb2f89c upstream.

d97a9d7aea04 ("staging/speakup: Add inflection synth parameter")
introduced the inflection parameter, but happened to drop the pitch
parameter from the dectlk driver. This restores it.

Cc: stable@vger.kernel.org
Fixes: d97a9d7aea04 ("staging/speakup: Add inflection synth parameter")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220206015626.aesbhvvdkmqsrbaw@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/accessibility/speakup/speakup_dectlk.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/accessibility/speakup/speakup_dectlk.c
+++ b/drivers/accessibility/speakup/speakup_dectlk.c
@@ -44,6 +44,7 @@ static struct var_t vars[] = {
 	{ CAPS_START, .u.s = {"[:dv ap 160] " } },
 	{ CAPS_STOP, .u.s = {"[:dv ap 100 ] " } },
 	{ RATE, .u.n = {"[:ra %d] ", 180, 75, 650, 0, 0, NULL } },
+	{ PITCH, .u.n = {"[:dv ap %d] ", 122, 50, 350, 0, 0, NULL } },
 	{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
 	{ VOL, .u.n = {"[:dv g5 %d] ", 86, 60, 86, 0, 0, NULL } },
 	{ PUNCT, .u.n = {"[:pu %c] ", 0, 0, 2, 0, 0, "nsa" } },

[PATCH 5.16 183/203] phy: ti: Fix missing sentinel for clk_div_table

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit 6d1e6bcb31663ee83aaea1f171f3dbfe95dd4a69 upstream.

_get_table_maxdiv() tries to access "clk_div_table" array out of bound
defined in phy-j721e-wiz.c. Add a sentinel entry to prevent
the following global-out-of-bounds error reported by enabling KASAN.

[    9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148
[    9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38
[    9.565926]
[    9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360
[    9.576242] Hardware name: Texas Instruments J721e EVM (DT)
[    9.581832] Workqueue: events_unbound deferred_probe_work_func
[    9.587708] Call trace:
[    9.590174]  dump_backtrace+0x20c/0x218
[    9.594038]  show_stack+0x18/0x68
[    9.597375]  dump_stack_lvl+0x9c/0xd8
[    9.601062]  print_address_description.constprop.0+0x78/0x334
[    9.606830]  kasan_report+0x1f0/0x260
[    9.610517]  __asan_load4+0x9c/0xd8
[    9.614030]  _get_maxdiv+0xc0/0x148
[    9.617540]  divider_determine_rate+0x88/0x488
[    9.622005]  divider_round_rate_parent+0xc8/0x124
[    9.626729]  wiz_clk_div_round_rate+0x54/0x68
[    9.631113]  clk_core_determine_round_nolock+0x124/0x158
[    9.636448]  clk_core_round_rate_nolock+0x68/0x138
[    9.641260]  clk_core_set_rate_nolock+0x268/0x3a8
[    9.645987]  clk_set_rate+0x50/0xa8
[    9.649499]  cdns_sierra_phy_init+0x88/0x248
[    9.653794]  phy_init+0x98/0x108
[    9.657046]  cdns_pcie_enable_phy+0xa0/0x170
[    9.661340]  cdns_pcie_init_phy+0x250/0x2b0
[    9.665546]  j721e_pcie_probe+0x4b8/0x798
[    9.669579]  platform_probe+0x8c/0x108
[    9.673350]  really_probe+0x114/0x630
[    9.677037]  __driver_probe_device+0x18c/0x220
[    9.681505]  driver_probe_device+0xac/0x150
[    9.685712]  __device_attach_driver+0xec/0x170
[    9.690178]  bus_for_each_drv+0xf0/0x158
[    9.694124]  __device_attach+0x184/0x210
[    9.698070]  device_initial_probe+0x14/0x20
[    9.702277]  bus_probe_device+0xec/0x100
[    9.706223]  deferred_probe_work_func+0x124/0x180
[    9.710951]  process_one_work+0x4b0/0xbc0
[    9.714983]  worker_thread+0x74/0x5d0
[    9.718668]  kthread+0x214/0x230
[    9.721919]  ret_from_fork+0x10/0x20
[    9.725520]
[    9.727032] The buggy address belongs to the variable:
[    9.732183]  clk_div_table+0x24/0x440

Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220117110108.4117-1-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/phy/ti/phy-j721e-wiz.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -233,6 +233,7 @@ static const struct clk_div_table clk_di
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 4, },
 	{ .val = 3, .div = 8, },
+	{ /* sentinel */ },
 };
 
 static const struct wiz_clk_div_sel clk_div_sel[] = {

[PATCH 5.16 184/203] iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL

[Greg Kroah-Hartman]

From: Mathias Krause <minipli@grsecurity.net>

commit c72ea20503610a4a7ba26c769357d31602769c01 upstream.

If we fail to copy the just created file descriptor to userland, we
try to clean up by putting back 'fd' and freeing 'ib'. The code uses
put_unused_fd() for the former which is wrong, as the file descriptor
was already published by fd_install() which gets called internally by
anon_inode_getfd().

This makes the error handling code leaving a half cleaned up file
descriptor table around and a partially destructed 'file' object,
allowing userland to play use-after-free tricks on us, by abusing
the still usable fd and making the code operate on a dangling
'file->private_data' pointer.

Instead of leaving the kernel in a partially corrupted state, don't
attempt to explicitly clean up and leave this to the process exit
path that'll release any still valid fds, including the one created
by the previous call to anon_inode_getfd(). Simply return -EFAULT to
indicate the error.

Fixes: f73f7f4da581 ("iio: buffer: add ioctl() to support opening extra buffers for IIO device")
Cc: stable@kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Nuno Sa <Nuno.Sa@analog.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/industrialio-buffer.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -1569,9 +1569,17 @@ static long iio_device_buffer_getfd(stru
 	}
 
 	if (copy_to_user(ival, &fd, sizeof(fd))) {
-		put_unused_fd(fd);
-		ret = -EFAULT;
-		goto error_free_ib;
+		/*
+		 * "Leak" the fd, as there's not much we can do about this
+		 * anyway. 'fd' might have been closed already, as
+		 * anon_inode_getfd() called fd_install() on it, which made
+		 * it reachable by userland.
+		 *
+		 * Instead of allowing a malicious user to play tricks with
+		 * us, rely on the process exit path to do any necessary
+		 * cleanup, as in releasing the file, if still needed.
+		 */
+		return -EFAULT;
 	}
 
 	return 0;

[PATCH 5.16 185/203] fs/proc: task_mmu.c: dont read mapcount for migration entry

[Greg Kroah-Hartman]

From: Yang Shi <shy828301@gmail.com>

commit 24d7275ce2791829953ed4e72f68277ceb2571c6 upstream.

The syzbot reported the below BUG:

  kernel BUG at include/linux/page-flags.h:785!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
  RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
  Call Trace:
    page_mapcount include/linux/mm.h:837 [inline]
    smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
    smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
    smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
    walk_pmd_range mm/pagewalk.c:128 [inline]
    walk_pud_range mm/pagewalk.c:205 [inline]
    walk_p4d_range mm/pagewalk.c:240 [inline]
    walk_pgd_range mm/pagewalk.c:277 [inline]
    __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
    walk_page_vma+0x277/0x350 mm/pagewalk.c:530
    smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
    smap_gather_stats fs/proc/task_mmu.c:741 [inline]
    show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
    seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
    seq_read+0x3e0/0x5b0 fs/seq_file.c:162
    vfs_read+0x1b5/0x600 fs/read_write.c:479
    ksys_read+0x12d/0x250 fs/read_write.c:619
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time.  MADV_FREE may split THPs if it is called
for partial THP.  It may trigger the below race:

           CPU A                         CPU B
           -----                         -----
  smaps walk:                      MADV_FREE:
  page_mapcount()
    PageCompound()
                                   split_huge_page()
    page = compound_head(page)
    PageDoubleMap(page)

When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.

This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.

Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount().  Don't skip getting mapcount
for device private entries since they do track references with mapcount.

Pagemap also has the similar issue although it was not reported.  Fixed
it as well.

[shy828301@gmail.com: v4]
  Link: https://lkml.kernel.org/r/20220203182641.824731-1-shy828301@gmail.com
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()]
  Link: https://lkml.kernel.org/r/20220207171049.1102239-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20220120202805.3369-1-shy828301@gmail.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: syzbot+1f52b3a18d5633fa7f82@syzkaller.appspotmail.com
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/task_mmu.c |   40 +++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)

--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -429,7 +429,8 @@ static void smaps_page_accumulate(struct
 }
 
 static void smaps_account(struct mem_size_stats *mss, struct page *page,
-		bool compound, bool young, bool dirty, bool locked)
+		bool compound, bool young, bool dirty, bool locked,
+		bool migration)
 {
 	int i, nr = compound ? compound_nr(page) : 1;
 	unsigned long size = nr * PAGE_SIZE;
@@ -456,8 +457,15 @@ static void smaps_account(struct mem_siz
 	 * page_count(page) == 1 guarantees the page is mapped exactly once.
 	 * If any subpage of the compound page mapped with PTE it would elevate
 	 * page_count().
+	 *
+	 * The page_mapcount() is called to get a snapshot of the mapcount.
+	 * Without holding the page lock this snapshot can be slightly wrong as
+	 * we cannot always read the mapcount atomically.  It is not safe to
+	 * call page_mapcount() even with PTL held if the page is not mapped,
+	 * especially for migration entries.  Treat regular migration entries
+	 * as mapcount == 1.
 	 */
-	if (page_count(page) == 1) {
+	if ((page_count(page) == 1) || migration) {
 		smaps_page_accumulate(mss, page, size, size << PSS_SHIFT, dirty,
 			locked, true);
 		return;
@@ -506,6 +514,7 @@ static void smaps_pte_entry(pte_t *pte,
 	struct vm_area_struct *vma = walk->vma;
 	bool locked = !!(vma->vm_flags & VM_LOCKED);
 	struct page *page = NULL;
+	bool migration = false;
 
 	if (pte_present(*pte)) {
 		page = vm_normal_page(vma, addr, *pte);
@@ -525,8 +534,11 @@ static void smaps_pte_entry(pte_t *pte,
 			} else {
 				mss->swap_pss += (u64)PAGE_SIZE << PSS_SHIFT;
 			}
-		} else if (is_pfn_swap_entry(swpent))
+		} else if (is_pfn_swap_entry(swpent)) {
+			if (is_migration_entry(swpent))
+				migration = true;
 			page = pfn_swap_entry_to_page(swpent);
+		}
 	} else {
 		smaps_pte_hole_lookup(addr, walk);
 		return;
@@ -535,7 +547,8 @@ static void smaps_pte_entry(pte_t *pte,
 	if (!page)
 		return;
 
-	smaps_account(mss, page, false, pte_young(*pte), pte_dirty(*pte), locked);
+	smaps_account(mss, page, false, pte_young(*pte), pte_dirty(*pte),
+		      locked, migration);
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -546,6 +559,7 @@ static void smaps_pmd_entry(pmd_t *pmd,
 	struct vm_area_struct *vma = walk->vma;
 	bool locked = !!(vma->vm_flags & VM_LOCKED);
 	struct page *page = NULL;
+	bool migration = false;
 
 	if (pmd_present(*pmd)) {
 		/* FOLL_DUMP will return -EFAULT on huge zero page */
@@ -553,8 +567,10 @@ static void smaps_pmd_entry(pmd_t *pmd,
 	} else if (unlikely(thp_migration_supported() && is_swap_pmd(*pmd))) {
 		swp_entry_t entry = pmd_to_swp_entry(*pmd);
 
-		if (is_migration_entry(entry))
+		if (is_migration_entry(entry)) {
+			migration = true;
 			page = pfn_swap_entry_to_page(entry);
+		}
 	}
 	if (IS_ERR_OR_NULL(page))
 		return;
@@ -566,7 +582,9 @@ static void smaps_pmd_entry(pmd_t *pmd,
 		/* pass */;
 	else
 		mss->file_thp += HPAGE_PMD_SIZE;
-	smaps_account(mss, page, true, pmd_young(*pmd), pmd_dirty(*pmd), locked);
+
+	smaps_account(mss, page, true, pmd_young(*pmd), pmd_dirty(*pmd),
+		      locked, migration);
 }
 #else
 static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
@@ -1367,6 +1385,7 @@ static pagemap_entry_t pte_to_pagemap_en
 {
 	u64 frame = 0, flags = 0;
 	struct page *page = NULL;
+	bool migration = false;
 
 	if (pte_present(pte)) {
 		if (pm->show_pfn)
@@ -1388,13 +1407,14 @@ static pagemap_entry_t pte_to_pagemap_en
 			frame = swp_type(entry) |
 				(swp_offset(entry) << MAX_SWAPFILES_SHIFT);
 		flags |= PM_SWAP;
+		migration = is_migration_entry(entry);
 		if (is_pfn_swap_entry(entry))
 			page = pfn_swap_entry_to_page(entry);
 	}
 
 	if (page && !PageAnon(page))
 		flags |= PM_FILE;
-	if (page && page_mapcount(page) == 1)
+	if (page && !migration && page_mapcount(page) == 1)
 		flags |= PM_MMAP_EXCLUSIVE;
 	if (vma->vm_flags & VM_SOFTDIRTY)
 		flags |= PM_SOFT_DIRTY;
@@ -1410,8 +1430,9 @@ static int pagemap_pmd_range(pmd_t *pmdp
 	spinlock_t *ptl;
 	pte_t *pte, *orig_pte;
 	int err = 0;
-
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	bool migration = false;
+
 	ptl = pmd_trans_huge_lock(pmdp, vma);
 	if (ptl) {
 		u64 flags = 0, frame = 0;
@@ -1450,11 +1471,12 @@ static int pagemap_pmd_range(pmd_t *pmdp
 			if (pmd_swp_uffd_wp(pmd))
 				flags |= PM_UFFD_WP;
 			VM_BUG_ON(!is_pmd_migration_entry(pmd));
+			migration = is_migration_entry(entry);
 			page = pfn_swap_entry_to_page(entry);
 		}
 #endif
 
-		if (page && page_mapcount(page) == 1)
+		if (page && !migration && page_mapcount(page) == 1)
 			flags |= PM_MMAP_EXCLUSIVE;
 
 		for (; addr != end; addr += PAGE_SIZE) {

[PATCH 5.16 186/203] mm: vmscan: remove deadlock due to throttling failing to make progress

[Greg Kroah-Hartman]

From: Mel Gorman <mgorman@suse.de>

commit b485c6f1f9f54b81443efda5f3d8a5036ba2cd91 upstream.

A soft lockup bug in kcompactd was reported in a private bugzilla with
the following visible in dmesg;

  watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479]
  watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479]
  watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479]
  watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479]

The machine had 256G of RAM with no swap and an earlier failed
allocation indicated that node 0 where kcompactd was run was potentially
unreclaimable;

  Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB
    inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB
    mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp:
    0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB
    kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes

Vlastimil Babka investigated a crash dump and found that a task
migrating pages was trying to drain PCP lists;

  PID: 52922  TASK: ffff969f820e5000  CPU: 19  COMMAND: "kworker/u128:3"
  Call Trace:
     __schedule
     schedule
     schedule_timeout
     wait_for_completion
     __flush_work
     __drain_all_pages
     __alloc_pages_slowpath.constprop.114
     __alloc_pages
     alloc_migration_target
     migrate_pages
     migrate_to_node
     do_migrate_pages
     cpuset_migrate_mm_workfn
     process_one_work
     worker_thread
     kthread
     ret_from_fork

This failure is specific to CONFIG_PREEMPT=n builds.  The root of the
problem is that kcompact0 is not rescheduling on a CPU while a task that
has isolated a large number of the pages from the LRU is waiting on
kcompact0 to reschedule so the pages can be released.  While
shrink_inactive_list() only loops once around too_many_isolated, reclaim
can continue without rescheduling if sc->skipped_deactivate == 1 which
could happen if there was no file LRU and the inactive anon list was not
low.

Link: https://lkml.kernel.org/r/20220203100326.GD3301@suse.de
Fixes: d818fca1cac3 ("mm/vmscan: throttle reclaim and compaction when too may pages are isolated")
Signed-off-by: Mel Gorman <mgorman@suse.de>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/vmscan.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1066,8 +1066,10 @@ void reclaim_throttle(pg_data_t *pgdat,
 	 * forward progress (e.g. journalling workqueues or kthreads).
 	 */
 	if (!current_is_kswapd() &&
-	    current->flags & (PF_IO_WORKER|PF_KTHREAD))
+	    current->flags & (PF_IO_WORKER|PF_KTHREAD)) {
+		cond_resched();
 		return;
+	}
 
 	/*
 	 * These figures are pulled out of thin air.

[PATCH 5.16 187/203] mm: memcg: synchronize objcg lists with a dedicated spinlock

[Greg Kroah-Hartman]

From: Roman Gushchin <guro@fb.com>

commit 0764db9b49c932b89ee4d9e3236dff4bb07b4a66 upstream.

Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:

  LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
          WARNING: possible circular locking dependency detected
          5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
          ------------------------------------------------------
          mmap1/202299 is trying to acquire lock:
          00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
          but task is already holding lock:
          00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
          which lock already depends on the new lock.
          the existing dependency chain (in reverse order) is:
          -> #1 (&sighand->siglock){-.-.}-{2:2}:
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 __lock_task_sighand+0x90/0x190
                 cgroup_freeze_task+0x2e/0x90
                 cgroup_migrate_execute+0x11c/0x608
                 cgroup_update_dfl_csses+0x246/0x270
                 cgroup_subtree_control_write+0x238/0x518
                 kernfs_fop_write_iter+0x13e/0x1e0
                 new_sync_write+0x100/0x190
                 vfs_write+0x22c/0x2d8
                 ksys_write+0x6c/0xf8
                 __do_syscall+0x1da/0x208
                 system_call+0x82/0xb0
          -> #0 (css_set_lock){..-.}-{2:2}:
                 check_prev_add+0xe0/0xed8
                 validate_chain+0x736/0xb20
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 obj_cgroup_release+0x4a/0xe0
                 percpu_ref_put_many.constprop.0+0x150/0x168
                 drain_obj_stock+0x94/0xe8
                 refill_obj_stock+0x94/0x278
                 obj_cgroup_charge+0x164/0x1d8
                 kmem_cache_alloc+0xac/0x528
                 __sigqueue_alloc+0x150/0x308
                 __send_signal+0x260/0x550
                 send_signal+0x7e/0x348
                 force_sig_info_to_task+0x104/0x180
                 force_sig_fault+0x48/0x58
                 __do_pgm_check+0x120/0x1f0
                 pgm_check_handler+0x11e/0x180
          other info that might help us debug this:
           Possible unsafe locking scenario:
                 CPU0                    CPU1
                 ----                    ----
            lock(&sighand->siglock);
                                         lock(css_set_lock);
                                         lock(&sighand->siglock);
            lock(css_set_lock);
           *** DEADLOCK ***
          2 locks held by mmap1/202299:
           #0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
           #1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
          stack backtrace:
          CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
          Hardware name: IBM 3906 M04 704 (LPAR)
          Call Trace:
            dump_stack_lvl+0x76/0x98
            check_noncircular+0x136/0x158
            check_prev_add+0xe0/0xed8
            validate_chain+0x736/0xb20
            __lock_acquire+0x604/0xbd8
            lock_acquire.part.0+0xe2/0x238
            lock_acquire+0xb0/0x200
            _raw_spin_lock_irqsave+0x6a/0xd8
            obj_cgroup_release+0x4a/0xe0
            percpu_ref_put_many.constprop.0+0x150/0x168
            drain_obj_stock+0x94/0xe8
            refill_obj_stock+0x94/0x278
            obj_cgroup_charge+0x164/0x1d8
            kmem_cache_alloc+0xac/0x528
            __sigqueue_alloc+0x150/0x308
            __send_signal+0x260/0x550
            send_signal+0x7e/0x348
            force_sig_info_to_task+0x104/0x180
            force_sig_fault+0x48/0x58
            __do_pgm_check+0x120/0x1f0
            pgm_check_handler+0x11e/0x180
          INFO: lockdep is turned off.

In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg.  Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.

This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).

In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.

To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.

Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/memcontrol.h |    5 +++--
 mm/memcontrol.c            |   10 +++++-----
 2 files changed, 8 insertions(+), 7 deletions(-)

--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -217,7 +217,7 @@ struct obj_cgroup {
 	struct mem_cgroup *memcg;
 	atomic_t nr_charged_bytes;
 	union {
-		struct list_head list;
+		struct list_head list; /* protected by objcg_lock */
 		struct rcu_head rcu;
 	};
 };
@@ -313,7 +313,8 @@ struct mem_cgroup {
 #ifdef CONFIG_MEMCG_KMEM
 	int kmemcg_id;
 	struct obj_cgroup __rcu *objcg;
-	struct list_head objcg_list; /* list of inherited objcgs */
+	/* list of inherited objcgs, protected by objcg_lock */
+	struct list_head objcg_list;
 #endif
 
 	MEMCG_PADDING(_pad2_);
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -254,7 +254,7 @@ struct mem_cgroup *vmpressure_to_memcg(s
 }
 
 #ifdef CONFIG_MEMCG_KMEM
-extern spinlock_t css_set_lock;
+static DEFINE_SPINLOCK(objcg_lock);
 
 bool mem_cgroup_kmem_disabled(void)
 {
@@ -298,9 +298,9 @@ static void obj_cgroup_release(struct pe
 	if (nr_pages)
 		obj_cgroup_uncharge_pages(objcg, nr_pages);
 
-	spin_lock_irqsave(&css_set_lock, flags);
+	spin_lock_irqsave(&objcg_lock, flags);
 	list_del(&objcg->list);
-	spin_unlock_irqrestore(&css_set_lock, flags);
+	spin_unlock_irqrestore(&objcg_lock, flags);
 
 	percpu_ref_exit(ref);
 	kfree_rcu(objcg, rcu);
@@ -332,7 +332,7 @@ static void memcg_reparent_objcgs(struct
 
 	objcg = rcu_replace_pointer(memcg->objcg, NULL, true);
 
-	spin_lock_irq(&css_set_lock);
+	spin_lock_irq(&objcg_lock);
 
 	/* 1) Ready to reparent active objcg. */
 	list_add(&objcg->list, &memcg->objcg_list);
@@ -342,7 +342,7 @@ static void memcg_reparent_objcgs(struct
 	/* 3) Move already reparented objcgs to the parent's list */
 	list_splice(&memcg->objcg_list, &parent->objcg_list);
 
-	spin_unlock_irq(&css_set_lock);
+	spin_unlock_irq(&objcg_lock);
 
 	percpu_ref_kill(&objcg->refcnt);
 }

[PATCH 5.16 188/203] seccomp: Invalidate seccomp mode to catch death failures

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 495ac3069a6235bfdf516812a2a9b256671bbdf9 upstream.

If seccomp tries to kill a process, it should never see that process
again. To enforce this proactively, switch the mode to something
impossible. If encountered: WARN, reject all syscalls, and attempt to
kill the process again even harder.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/seccomp.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -29,6 +29,9 @@
 #include <linux/syscalls.h>
 #include <linux/sysctl.h>
 
+/* Not exposed in headers: strictly internal use only. */
+#define SECCOMP_MODE_DEAD	(SECCOMP_MODE_FILTER + 1)
+
 #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
 #include <asm/syscall.h>
 #endif
@@ -1010,6 +1013,7 @@ static void __secure_computing_strict(in
 #ifdef SECCOMP_DEBUG
 	dump_stack();
 #endif
+	current->seccomp.mode = SECCOMP_MODE_DEAD;
 	seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL_THREAD, true);
 	do_exit(SIGKILL);
 }
@@ -1261,6 +1265,7 @@ static int __seccomp_filter(int this_sys
 	case SECCOMP_RET_KILL_THREAD:
 	case SECCOMP_RET_KILL_PROCESS:
 	default:
+		current->seccomp.mode = SECCOMP_MODE_DEAD;
 		seccomp_log(this_syscall, SIGSYS, action, true);
 		/* Dump core only if this is the last remaining thread. */
 		if (action != SECCOMP_RET_KILL_THREAD ||
@@ -1309,6 +1314,11 @@ int __secure_computing(const struct secc
 		return 0;
 	case SECCOMP_MODE_FILTER:
 		return __seccomp_filter(this_syscall, sd, false);
+	/* Surviving SECCOMP_RET_KILL_* must be proactively impossible. */
+	case SECCOMP_MODE_DEAD:
+		WARN_ON_ONCE(1);
+		do_exit(SIGKILL);
+		return -1;
 	default:
 		BUG();
 	}

[PATCH 5.16 189/203] signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 5c72263ef2fbe99596848f03758ae2dc593adf2c upstream.

Fatal SIGSYS signals (i.e. seccomp RET_KILL_* syscall filter actions)
were not being delivered to ptraced pid namespace init processes. Make
sure the SIGNAL_UNKILLABLE doesn't get set for these cases.

Reported-by: Robert Święcki <robert@swiecki.net>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/lkml/878rui8u4a.fsf@email.froward.int.ebiederm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/signal.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1339,9 +1339,10 @@ force_sig_info_to_task(struct kernel_sig
 	}
 	/*
 	 * Don't clear SIGNAL_UNKILLABLE for traced tasks, users won't expect
-	 * debugging to leave init killable.
+	 * debugging to leave init killable. But HANDLER_EXIT is always fatal.
 	 */
-	if (action->sa.sa_handler == SIG_DFL && !t->ptrace)
+	if (action->sa.sa_handler == SIG_DFL &&
+	    (!t->ptrace || (handler == HANDLER_EXIT)))
 		t->signal->flags &= ~SIGNAL_UNKILLABLE;
 	ret = send_signal(sig, info, t, PIDTYPE_PID);
 	spin_unlock_irqrestore(&t->sighand->siglock, flags);

[PATCH 5.16 190/203] s390/cio: verify the driver availability for path_event call

[Greg Kroah-Hartman]

From: Vineeth Vijayan <vneethv@linux.ibm.com>

commit dd9cb842fa9d90653a9b48aba52f89c069f3bc50 upstream.

If no driver is attached to a device or the driver does not provide the
path_event function, an FCES path-event on this device could end up in a
kernel-panic. Verify the driver availability before the path_event
function call.

Fixes: 32ef938815c1 ("s390/cio: Add support for FCES status notification")
Cc: stable@vger.kernel.org
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/cio/device.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -1194,7 +1194,7 @@ static int io_subchannel_chp_event(struc
 			else
 				path_event[chpid] = PE_NONE;
 		}
-		if (cdev)
+		if (cdev && cdev->drv && cdev->drv->path_event)
 			cdev->drv->path_event(cdev, path_event);
 		break;
 	}

[PATCH 5.16 191/203] bus: mhi: pci_generic: Add mru_default for Foxconn SDX55

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit a0572cea8866230ac13da6358c88075f89e99b20 upstream.

For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.

Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com
[mani: Added pci_generic prefix to subject and CCed stable]
Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Cc: stable@vger.kernel.org # v5.12+
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bus/mhi/pci_generic.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -366,6 +366,7 @@ static const struct mhi_pci_dev_info mhi
 	.config = &modem_foxconn_sdx55_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
+	.mru_default = 32768,
 	.sideband_wake = false,
 };
 

[PATCH 5.16 192/203] bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

commit 05daa805a86c831ad9692f6f15e1b877c8f10638 upstream.

For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.

Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com
[mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable]
Fixes: 87693e092bd0 ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI")
Cc: stable@vger.kernel.org # v5.14 +
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bus/mhi/pci_generic.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -402,6 +402,7 @@ static const struct mhi_pci_dev_info mhi
 	.config = &modem_mv31_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
+	.mru_default = 32768,
 };
 
 static const struct pci_device_id mhi_pci_id_table[] = {

[PATCH 5.16 193/203] x86/sgx: Silence softlockup detection when releasing large enclaves

[Greg Kroah-Hartman]

From: Reinette Chatre <reinette.chatre@intel.com>

commit 8795359e35bc33bf86b6d0765aa7f37431db3b9c upstream.

Vijay reported that the "unclobbered_vdso_oversubscribed" selftest
triggers the softlockup detector.

Actual SGX systems have 128GB of enclave memory or more.  The
"unclobbered_vdso_oversubscribed" selftest creates one enclave which
consumes all of the enclave memory on the system. Tearing down such a
large enclave takes around a minute, most of it in the loop where
the EREMOVE instruction is applied to each individual 4k enclave page.

Spending one minute in a loop triggers the softlockup detector.

Add a cond_resched() to give other tasks a chance to run and placate
the softlockup detector.

Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>  (kselftest as sanity check)
Link: https://lkml.kernel.org/r/ced01cac1e75f900251b0a4ae1150aa8ebd295ec.1644345232.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/sgx/encl.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/kernel/cpu/sgx/encl.c
+++ b/arch/x86/kernel/cpu/sgx/encl.c
@@ -410,6 +410,8 @@ void sgx_encl_release(struct kref *ref)
 		}
 
 		kfree(entry);
+		/* Invoke scheduler to prevent soft lockups. */
+		cond_resched();
 	}
 
 	xa_destroy(&encl->page_array);

[PATCH 5.16 194/203] sched/fair: Fix fault in reweight_entity

[Greg Kroah-Hartman]

From: Tadeusz Struk <tadeusz.struk@linaro.org>

commit 13765de8148f71fa795e0a6607de37c49ea5915a upstream.

Syzbot found a GPF in reweight_entity. This has been bisected to
commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid
sched_task_group")

There is a race between sched_post_fork() and setpriority(PRIO_PGRP)
within a thread group that causes a null-ptr-deref in
reweight_entity() in CFS. The scenario is that the main process spawns
number of new threads, which then call setpriority(PRIO_PGRP, 0, -20),
wait, and exit.  For each of the new threads the copy_process() gets
invoked, which adds the new task_struct and calls sched_post_fork()
for it.

In the above scenario there is a possibility that
setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread
in the group that is just being created by copy_process(), and for
which the sched_post_fork() has not been executed yet. This will
trigger a null pointer dereference in reweight_entity(), as it will
try to access the run queue pointer, which hasn't been set.

Before the mentioned change the cfs_rq pointer for the task  has been
set in sched_fork(), which is called much earlier in copy_process(),
before the new task is added to the thread_group.  Now it is done in
the sched_post_fork(), which is called after that.  To fix the issue
the remove the update_load param from the update_load param() function
and call reweight_task() only if the task flag doesn't have the
TASK_NEW flag set.

Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: syzbot+af7a719bc92395ee41b3@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220203161846.1160750-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/core.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1203,8 +1203,9 @@ int tg_nop(struct task_group *tg, void *
 }
 #endif
 
-static void set_load_weight(struct task_struct *p, bool update_load)
+static void set_load_weight(struct task_struct *p)
 {
+	bool update_load = !(READ_ONCE(p->__state) & TASK_NEW);
 	int prio = p->static_prio - MAX_RT_PRIO;
 	struct load_weight *load = &p->se.load;
 
@@ -4392,7 +4393,7 @@ int sched_fork(unsigned long clone_flags
 			p->static_prio = NICE_TO_PRIO(0);
 
 		p->prio = p->normal_prio = p->static_prio;
-		set_load_weight(p, false);
+		set_load_weight(p);
 
 		/*
 		 * We don't need the reset flag anymore after the fork. It has
@@ -6879,7 +6880,7 @@ void set_user_nice(struct task_struct *p
 		put_prev_task(rq, p);
 
 	p->static_prio = NICE_TO_PRIO(nice);
-	set_load_weight(p, true);
+	set_load_weight(p);
 	old_prio = p->prio;
 	p->prio = effective_prio(p);
 
@@ -7170,7 +7171,7 @@ static void __setscheduler_params(struct
 	 */
 	p->rt_priority = attr->sched_priority;
 	p->normal_prio = normal_prio(p);
-	set_load_weight(p, true);
+	set_load_weight(p);
 }
 
 /*
@@ -9409,7 +9410,7 @@ void __init sched_init(void)
 #endif
 	}
 
-	set_load_weight(&init_task, false);
+	set_load_weight(&init_task);
 
 	/*
 	 * The boot idle thread does lazy MMU switching as well:

[PATCH 5.16 195/203] Makefile.extrawarn: Move -Wunaligned-access to W=1

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream.

-Wunaligned-access is a new warning in clang that is default enabled for
arm and arm64 under certain circumstances within the clang frontend (see
LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows
1284 total/70 unique instances of this warning (most of the instances
are in header files), which is quite noisy.

To keep a normal build green through CONFIG_WERROR, only show this
warning with W=1, which will allow automated build systems to catch new
instances of the warning so that the total number can be driven down to
zero eventually since catching unaligned accesses at compile time would
be generally useful.

Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a
Link: https://github.com/ClangBuiltLinux/linux/issues/1569
Link: https://github.com/ClangBuiltLinux/linux/issues/1576
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/Makefile.extrawarn |    1 +
 1 file changed, 1 insertion(+)

--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -51,6 +51,7 @@ KBUILD_CFLAGS += -Wno-sign-compare
 KBUILD_CFLAGS += -Wno-format-zero-length
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
 KBUILD_CFLAGS += -Wno-tautological-constant-out-of-range-compare
+KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access)
 endif
 
 endif

[PATCH 5.16 196/203] scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit c80b27cfd93ba9f5161383f798414609e84729f3 upstream.

The driver is initiating NVMe PRLIs to determine device NVMe support.  This
should not be occurring if CONFIG_NVME_FC support is disabled.

Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.

Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc.h      |   13 ++++++++++---
 drivers/scsi/lpfc/lpfc_attr.c |    4 ++--
 2 files changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1165,6 +1165,16 @@ struct lpfc_hba {
 	uint32_t cfg_hostmem_hgp;
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_enable_fc4_type;
+#define LPFC_ENABLE_FCP  1
+#define LPFC_ENABLE_NVME 2
+#define LPFC_ENABLE_BOTH 3
+#if (IS_ENABLED(CONFIG_NVME_FC))
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#else
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#endif
 	uint32_t cfg_aer_support;
 	uint32_t cfg_sriov_nr_virtfn;
 	uint32_t cfg_request_firmware_upgrade;
@@ -1186,9 +1196,6 @@ struct lpfc_hba {
 	uint32_t cfg_ras_fwlog_func;
 	uint32_t cfg_enable_bbcr;	/* Enable BB Credit Recovery */
 	uint32_t cfg_enable_dpp;	/* Enable Direct Packet Push */
-#define LPFC_ENABLE_FCP  1
-#define LPFC_ENABLE_NVME 2
-#define LPFC_ENABLE_BOTH 3
 	uint32_t cfg_enable_pbde;
 	uint32_t cfg_enable_mi;
 	struct nvmet_fc_target_port *targetport;
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3978,8 +3978,8 @@ LPFC_ATTR_R(nvmet_mrq_post,
  *                    3 - register both FCP and NVME
  * Supported values are [1,3]. Default value is 3
  */
-LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH,
-	    LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
+LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE,
+	    LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE,
 	    "Enable FC4 Protocol support - FCP / NVME");
 
 /*

[PATCH 5.16 197/203] scsi: lpfc: Reduce log messages seen after firmware download

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit 5852ed2a6a39c862c8a3fdf646e1f4e01b91d710 upstream.

Messages around firmware download were incorrectly tagged as being related
to discovery trace events. Thus, firmware download status ended up dumping
the trace log as well as the firmware update message. As there were a
couple of log messages in this state, the trace log was dumped multiple
times.

Resolve this by converting from trace events to SLI events.

Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_init.c |    2 +-
 drivers/scsi/lpfc/lpfc_sli.c  |    8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2104,7 +2104,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *ph
 		}
 		if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
 		    reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"3143 Port Down: Firmware Update "
 					"Detected\n");
 			en_rn_msg = false;
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -13365,6 +13365,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *ph
 	uint32_t uerr_sta_hi, uerr_sta_lo;
 	uint32_t if_type, portsmphr;
 	struct lpfc_register portstat_reg;
+	u32 logmask;
 
 	/*
 	 * For now, use the SLI4 device internal unrecoverable error
@@ -13415,7 +13416,12 @@ lpfc_sli4_eratt_read(struct lpfc_hba *ph
 				readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
 			phba->work_status[1] =
 				readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			logmask = LOG_TRACE_EVENT;
+			if (phba->work_status[0] ==
+				SLIPORT_ERR1_REG_ERR_CODE_2 &&
+			    phba->work_status[1] == SLIPORT_ERR2_REG_FW_RESTART)
+				logmask = LOG_SLI;
+			lpfc_printf_log(phba, KERN_ERR, logmask,
 					"2885 Port Status Event: "
 					"port status reg 0x%x, "
 					"port smphr reg 0x%x, "

[PATCH 5.16 198/203] MIPS: octeon: Fix missed PTR->PTR_WD conversion

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

commit 50317b636e7184d15126e2dfc83db0963a38d31e upstream.

Fixes: fa62f39dc7e2 ("MIPS: Fix build error due to PTR used in more places")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/cavium-octeon/octeon-memcpy.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -74,7 +74,7 @@
 #define EXC(inst_reg,addr,handler)		\
 9:	inst_reg, addr;				\
 	.section __ex_table,"a";		\
-	PTR	9b, handler;			\
+	PTR_WD	9b, handler;			\
 	.previous
 
 /*

[PATCH 5.16 199/203] arm64: dts: imx8mq: fix lcdif port node

[Greg Kroah-Hartman]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

commit 91f6d5f181f6629dd74ab71759fe92d3f4eff966 upstream.

The port node does not have a unit-address, remove it.
This fixes the warnings:
lcd-controller@30320000: 'port' is a required property
lcd-controller@30320000: 'port@0' does not match any of the regexes:
'pinctrl-[0-9]+'

Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -526,7 +526,7 @@
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};

[PATCH 5.16 200/203] perf: Fix list corruption in perf_cgroup_switch()

[Greg Kroah-Hartman]

From: Song Liu <song@kernel.org>

commit 5f4e5ce638e6a490b976ade4a40017b40abb2da0 upstream.

There's list corruption on cgrp_cpuctx_list. This happens on the
following path:

  perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
      cpu_ctx_sched_in
         ctx_sched_in
            ctx_pinned_sched_in
              merge_sched_in
                  perf_cgroup_event_disable: remove the event from the list

Use list_for_each_entry_safe() to allow removing an entry during
iteration.

Fixes: 058fe1c0440e ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -839,7 +839,7 @@ static DEFINE_PER_CPU(struct list_head,
  */
 static void perf_cgroup_switch(struct task_struct *task, int mode)
 {
-	struct perf_cpu_context *cpuctx;
+	struct perf_cpu_context *cpuctx, *tmp;
 	struct list_head *list;
 	unsigned long flags;
 
@@ -850,7 +850,7 @@ static void perf_cgroup_switch(struct ta
 	local_irq_save(flags);
 
 	list = this_cpu_ptr(&cgrp_cpuctx_list);
-	list_for_each_entry(cpuctx, list, cgrp_cpuctx_entry) {
+	list_for_each_entry_safe(cpuctx, tmp, list, cgrp_cpuctx_entry) {
 		WARN_ON_ONCE(cpuctx->ctx.nr_cgroups == 0);
 
 		perf_ctx_lock(cpuctx, cpuctx->task_ctx);

[PATCH 5.16 201/203] kconfig: fix missing fclose() on error paths

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit d23a0c3718222a42430fd56359478a6fc7675070 upstream.

The file is not closed when ferror() fails.

Fixes: 00d674cb3536 ("kconfig: refactor conf_write_dep()")
Fixes: 57ddd07c4560 ("kconfig: refactor conf_write_autoconf()")
Reported-by: Ryan Cai <ycaibb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/kconfig/confdata.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -977,10 +977,10 @@ static int conf_write_autoconf_cmd(const
 
 	fprintf(out, "\n$(deps_config): ;\n");
 
-	if (ferror(out)) /* error check for all fprintf() calls */
-		return -1;
-
+	ret = ferror(out); /* error check for all fprintf() calls */
 	fclose(out);
+	if (ret)
+		return -1;
 
 	if (rename(tmp, name)) {
 		perror("rename");
@@ -1091,10 +1091,10 @@ static int __conf_write_autoconf(const c
 			print_symbol(file, sym);
 
 	/* check possible errors in conf_write_heading() and print_symbol() */
-	if (ferror(file))
-		return -1;
-
+	ret = ferror(file);
 	fclose(file);
+	if (ret)
+		return -1;
 
 	if (rename(tmp, filename)) {
 		perror("rename");

[PATCH 5.16 202/203] docs/ABI: testing: aspeed-uart-routing: Escape asterisk

[Greg Kroah-Hartman]

From: Chia-Wei Wang <chiawei_wang@aspeedtech.com>

commit 088400521e421a1df7d0128dc0f9246db4ef1c7c upstream.

Escape asterisk symbols to fix the following warning:

"WARNING: Inline emphasis start-string without end-string"

Fixes: c6807970c3bc ("soc: aspeed: Add UART routing support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220124014351.9121-1-chiawei_wang@aspeedtech.com
Link: https://lore.kernel.org/r/20220201070027.196314-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
+++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
@@ -9,7 +9,7 @@ Description:	Selects the RX source of th
 		depends on the selected file.
 
 		e.g.
-		cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
+		cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1
 		[io1] io2 io3 io4 uart2 uart3 uart4 io6
 
 		In this case, UART1 gets its input from IO1 (physical serial port 1).
@@ -17,7 +17,7 @@ Description:	Selects the RX source of th
 Users:		OpenBMC.  Proposed changes should be mailed to
 		openbmc@lists.ozlabs.org
 
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/io*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/io\*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>

[PATCH 5.16 203/203] iommu: Fix potential use-after-free during probe

[Greg Kroah-Hartman]

From: Vijayanand Jitta <quic_vjitta@quicinc.com>

commit b54240ad494300ff0994c4539a531727874381f4 upstream.

Kasan has reported the following use after free on dev->iommu.
when a device probe fails and it is in process of freeing dev->iommu
in dev_iommu_free function, a deferred_probe_work_func runs in parallel
and tries to access dev->iommu->fwspec in of_iommu_configure path thus
causing use after free.

BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4
Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153

Workqueue: events_unbound deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x33c
 show_stack+0x18/0x24
 dump_stack_lvl+0x16c/0x1e0
 print_address_description+0x84/0x39c
 __kasan_report+0x184/0x308
 kasan_report+0x50/0x78
 __asan_load8+0xc0/0xc4
 of_iommu_configure+0xb4/0x4a4
 of_dma_configure_id+0x2fc/0x4d4
 platform_dma_configure+0x40/0x5c
 really_probe+0x1b4/0xb74
 driver_probe_device+0x11c/0x228
 __device_attach_driver+0x14c/0x304
 bus_for_each_drv+0x124/0x1b0
 __device_attach+0x25c/0x334
 device_initial_probe+0x24/0x34
 bus_probe_device+0x78/0x134
 deferred_probe_work_func+0x130/0x1a8
 process_one_work+0x4c8/0x970
 worker_thread+0x5c8/0xaec
 kthread+0x1f8/0x220
 ret_from_fork+0x10/0x18

Allocated by task 1:
 ____kasan_kmalloc+0xd4/0x114
 __kasan_kmalloc+0x10/0x1c
 kmem_cache_alloc_trace+0xe4/0x3d4
 __iommu_probe_device+0x90/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Freed by task 1:
 kasan_set_track+0x4c/0x84
 kasan_set_free_info+0x28/0x4c
 ____kasan_slab_free+0x120/0x15c
 __kasan_slab_free+0x18/0x28
 slab_free_freelist_hook+0x204/0x2fc
 kfree+0xfc/0x3a4
 __iommu_probe_device+0x284/0x394
 probe_iommu_group+0x70/0x9c
 bus_for_each_dev+0x11c/0x19c
 bus_iommu_probe+0xb8/0x7d4
 bus_set_iommu+0xcc/0x13c
 arm_smmu_bus_init+0x44/0x130 [arm_smmu]
 arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
 platform_drv_probe+0xe4/0x13c
 really_probe+0x2c8/0xb74
 driver_probe_device+0x11c/0x228
 device_driver_attach+0xf0/0x16c
 __driver_attach+0x80/0x320
 bus_for_each_dev+0x11c/0x19c
 driver_attach+0x38/0x48
 bus_add_driver+0x1dc/0x3a4
 driver_register+0x18c/0x244
 __platform_driver_register+0x88/0x9c
 init_module+0x64/0xff4 [arm_smmu]
 do_one_initcall+0x17c/0x2f0
 do_init_module+0xe8/0x378
 load_module+0x3f80/0x4a40
 __se_sys_finit_module+0x1a0/0x1e4
 __arm64_sys_finit_module+0x44/0x58
 el0_svc_common+0x100/0x264
 do_el0_svc+0x38/0xa4
 el0_svc+0x20/0x30
 el0_sync_handler+0x68/0xac
 el0_sync+0x160/0x180

Fix this by setting dev->iommu to NULL first and
then freeing dev_iommu structure in dev_iommu_free
function.

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/iommu.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -207,9 +207,14 @@ static struct dev_iommu *dev_iommu_get(s
 
 static void dev_iommu_free(struct device *dev)
 {
-	iommu_fwspec_free(dev);
-	kfree(dev->iommu);
+	struct dev_iommu *param = dev->iommu;
+
 	dev->iommu = NULL;
+	if (param->fwspec) {
+		fwnode_handle_put(param->fwspec->iommu_fwnode);
+		kfree(param->fwspec);
+	}
+	kfree(param);
 }
 
 static int __iommu_probe_device(struct device *dev, struct list_head *group_list)

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Naresh Kamboju]

On Mon, 14 Feb 2022 at 15:23, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

On Linux mainline master branch with arm64 clang-nigtly build failed
due to following errors and warnings.
Now it is also noticed on stable-rc 5.15 and 5.16.

net/ipv4/tcp_input.c: clang: error: clang frontend command failed with
exit code 139 (use -v to see invocation)
https://github.com/llvm/llvm-project/issues/53811


make --silent --keep-going --jobs=8
O=/home/tuxbuild/.cache/tuxmake/builds/current LLVM=1 LLVM_IAS=1
ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CROSS_COMPILE_COMPAT=arm-linux-gnueabihf- HOSTCC=clang CC=clang
PLEASE submit a bug report to
https://github.com/llvm/llvm-project/issues/ and include the crash
backtrace, preprocessed source, and associated run script.
Stack dump:
0. Program arguments: clang -Wp,-MMD,net/ipv4/.tcp_input.o.d -nostdinc
-I/builds/linux/arch/arm64/include -I./arch/arm64/include/generated
-I/builds/linux/include -I./include
-I/builds/linux/arch/arm64/include/uapi
-I./arch/arm64/include/generated/uapi -I/builds/linux/include/uapi
-I./include/generated/uapi -include
/builds/linux/include/linux/compiler-version.h -include
/builds/linux/include/linux/kconfig.h -include
/builds/linux/include/linux/compiler_types.h -D__KERNEL__
-mlittle-endian -DCC_USING_PATCHABLE_FUNCTION_ENTRY
-DKASAN_SHADOW_SCALE_SHIFT= -Qunused-arguments
-fmacro-prefix-map=/builds/linux/= -Wall -Wundef
-Werror=strict-prototypes -Wno-trigraphs -fno-strict-aliasing
-fno-common -fshort-wchar -fno-PIE
-Werror=implicit-function-declaration -Werror=implicit-int
-Werror=return-type -Wno-format-security -std=gnu89
--target=aarch64-linux-gnu -fintegrated-as
-Werror=unknown-warning-option -Werror=ignored-optimization-argument
-mgeneral-regs-only -DCONFIG_CC_HAS_K_CONSTRAINT=1 -Wno-psabi
-fno-asynchronous-unwind-tables -fno-unwind-tables
-mbranch-protection=pac-ret+leaf+bti -Wa,-march=armv8.5-a
-DARM64_ASM_ARCH=\"armv8.5-a\" -DKASAN_SHADOW_SCALE_SHIFT=
-fno-delete-null-pointer-checks -Wno-frame-address
-Wno-address-of-packed-member -O2 -Wframe-larger-than=2048
-fstack-protector-strong -Wimplicit-fallthrough -Wno-gnu
-mno-global-merge -Wno-unused-but-set-variable
-Wno-unused-const-variable -fno-omit-frame-pointer
-fno-optimize-sibling-calls -ftrivial-auto-var-init=zero
-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
-fno-stack-clash-protection -fpatchable-function-entry=2
-Wdeclaration-after-statement -Wvla -Wno-pointer-sign
-Wcast-function-type -Wno-array-bounds -fno-strict-overflow
-fno-stack-check -Werror=date-time -Werror=incompatible-pointer-types
-Wno-initializer-overrides -Wno-format -Wno-sign-compare
-Wno-format-zero-length -Wno-pointer-to-enum-cast
-Wno-tautological-constant-out-of-range-compare -Wno-unaligned-access
-mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0
-mstack-protector-guard-offset=1408 -I /builds/linux/net/ipv4 -I
./net/ipv4 -DKBUILD_MODFILE=\"net/ipv4/tcp_input\"
-DKBUILD_BASENAME=\"tcp_input\" -DKBUILD_MODNAME=\"tcp_input\"
-D__KBUILD_MODNAME=kmod_tcp_input -c -o net/ipv4/tcp_input.o
/builds/linux/net/ipv4/tcp_input.c
1. <eof> parser at end of file
2. Code generation
3. Running pass 'Function Pass Manager' on module
'/builds/linux/net/ipv4/tcp_input.c'.
4. Running pass 'Live Interval Analysis' on function '@tcp_ack'
 #0 0x00007fcc9438ce91 llvm::sys::PrintStackTrace(llvm::raw_ostream&,
int) (/usr/lib/x86_64-linux-gnu/libLLVM-15.so.1+0xe93e91)


Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Greg Kroah-Hartman]

On Mon, Feb 14, 2022 at 04:29:43PM +0530, Naresh Kamboju wrote:
> On Mon, 14 Feb 2022 at 15:23, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.16.10 release.
> > There are 203 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> On Linux mainline master branch with arm64 clang-nigtly build failed
> due to following errors and warnings.
> Now it is also noticed on stable-rc 5.15 and 5.16.

Sounds like a compiler error.  Do the clang developers know about this?

thanks,

greg k-h

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Naresh Kamboju]

On Mon, 14 Feb 2022 at 16:57, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Mon, Feb 14, 2022 at 04:29:43PM +0530, Naresh Kamboju wrote:
> > On Mon, 14 Feb 2022 at 15:23, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > >
> > > This is the start of the stable review cycle for the 5.16.10 release.
> > > There are 203 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> > > or in the git tree and branch at:
> > >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> > On Linux mainline master branch with arm64 clang-nigtly build failed
> > due to following errors and warnings.
> > Now it is also noticed on stable-rc 5.15 and 5.16.
>
> Sounds like a compiler error.  Do the clang developers know about this?

I have reported a new issue on LLVM github.
https://github.com/llvm/llvm-project/issues/53811

- Naresh

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Jeffrin Thalakkottoor]

On Mon, Feb 14, 2022 at 3:48 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
hello,

Compiled and booted  5.16.10-rc1+  on  VivoBook 15_ASUS Laptop X507UAR.
NO new regressions from dmesg.

Tested-by: Jeffrin Jose T  <jeffrin@rajagiritech.edu.in>


--
software engineer
rajagiri school of engineering and technology  -  autonomous

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Jon Hunter]

On Mon, 14 Feb 2022 10:24:04 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.16:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    122 tests:	122 pass, 0 fail

Linux version:	5.16.10-rc1-g5c09166a84ba
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

RE: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Fox Chen]

On Mon, 14 Feb 2022 10:24:04 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.16.10-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Nathan Chancellor]

On Mon, Feb 14, 2022 at 12:27:33PM +0100, Greg Kroah-Hartman wrote:
> On Mon, Feb 14, 2022 at 04:29:43PM +0530, Naresh Kamboju wrote:
> > On Mon, 14 Feb 2022 at 15:23, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > >
> > > This is the start of the stable review cycle for the 5.16.10 release.
> > > There are 203 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> > > or in the git tree and branch at:
> > >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> > 
> > On Linux mainline master branch with arm64 clang-nigtly build failed
> > due to following errors and warnings.
> > Now it is also noticed on stable-rc 5.15 and 5.16.
> 
> Sounds like a compiler error.  Do the clang developers know about this?

Yes, please see my response to Naresh in his other report for more
information:

https://lore.kernel.org/r/Ygp2wVo8JfWh5iOk@dev-arch.archlinux-ax161

Cheers,
Nathan

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Naresh Kamboju]

On Mon, 14 Feb 2022 at 15:23, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.16.10-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.16.y
* git commit: 5c09166a84bab4ec112638721f9e2a7a3831128a
* git describe: v5.16.9-204-g5c09166a84ba
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.16.y/build/v5.16.9-204-g5c09166a84ba

## Test Regressions (compared to v5.16.8-6-gddf6ceb4eefb)
No test regressions found.

## Metric Regressions (compared to v5.16.8-6-gddf6ceb4eefb)
No metric regressions found.

## Test Fixes (compared to v5.16.8-6-gddf6ceb4eefb)
No test fixes found.

## Metric Fixes (compared to v5.16.8-6-gddf6ceb4eefb)
No metric fixes found.

## Test result summary
total: 96370, pass: 82041, fail: 1389, skip: 12172, xfail: 768

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 259 total, 259 passed, 0 failed
* arm64: 37 total, 35 passed, 2 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 36 total, 36 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 52 total, 39 passed, 13 failed
* riscv: 24 total, 20 passed, 4 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 37 total, 37 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* prep-inline
* rcutorture
* ssuite
* v4l2-compliance


--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Rudi Heitbaum]

On Mon, Feb 14, 2022 at 10:24:04AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.

Hi Greg,

5.16.10-rc1 tested.

Run tested on:
- Allwinner H6 (Tanix TX6)
- Intel Tiger Lake x86_64 (nuc11 i7-1165G7)

In addition - build tested on:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro
- Samsung Exynos

Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
--
Rudi

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Florian Fainelli]

On 2/14/22 1:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Shuah Khan]

On 2/14/22 2:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Slade Watkins]

On Mon, Feb 14, 2022, at 4:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.

5.16.10-rc1 on my x86_64 test system compiled and booted with no errors or regressions.

Tested-by: Slade Watkins <slade@sladewatkins.com>

Thanks,
Slade

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Guenter Roeck]

On Mon, Feb 14, 2022 at 10:24:04AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 488 pass: 488 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Zan Aziz]

On Mon, Feb 14, 2022 at 8:02 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Hi Greg,

Compiled and booted on my test system Lenovo P50s: Intel Core i7
No emergency and critical messages in the dmesg

./perf bench sched all
# Running sched/messaging benchmark...
# 20 sender and receiver processes per group
# 10 groups == 400 processes run

     Total time: 0.449 [sec]

# Running sched/pipe benchmark...
# Executed 1000000 pipe operations between two processes

     Total time: 8.687 [sec]

       8.687780 usecs/op
         115104 ops/sec

Tested-by: Zan Aziz <zanaziz313@gmail.com>

Thanks
-Zan

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Ron Economos]

On 2/14/22 01:24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Bagas Sanjaya]

On 14/02/22 16.24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0)
and powerpc (ps3_defconfig, gcc 11.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Scott Bruce]

On 2/14/22 01:24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Build, dmesg, desktop use and s0ix suspend all look good on x86_64/Cezanne.

Tested-by: Scott Bruce <smbruce@gmail.com>

Re: [PATCH 5.16 000/203] 5.16.10-rc1 review

[Justin Forbes]

On Mon, Feb 14, 2022 at 10:24:04AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.10 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Feb 2022 09:24:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.10-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted.

Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>