All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/9] xhci and hub features for usb-next
@ 2022-02-16  9:09 Mathias Nyman
  2022-02-16  9:09 ` [PATCH 1/9] xhci: dbc: refactor xhci_dbc_init() Mathias Nyman
                   ` (9 more replies)
  0 siblings, 10 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

Hi Greg

This series mostly adds support for running xhci DbC on more than one
xHC controller in a setup at the same time.

There are also some link power management changes, of which one touches
usb core hub code, removing an extra LPM disable before device reset.

Thanks
-Mathias

Mathias Nyman (7):
  xhci: dbc: refactor xhci_dbc_init()
  xhci: dbc: create and remove dbc structure in dbgtty driver.
  xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit
  xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe
  xhci: dbgtty: use IDR to support several dbc instances.
  xhci: Allocate separate command structures for each LPM command
  usb: remove Link Powermanagement (LPM) disable before port reset.

Sergey Shtylyov (1):
  usb: host: xhci: drop redundant checks

kernel test robot (1):
  usb: xhci: fix minmax.cocci warnings

 drivers/usb/core/hub.c         |  13 +--
 drivers/usb/host/xhci-dbgcap.c | 145 ++++++++++++++++-----------------
 drivers/usb/host/xhci-dbgcap.h |  26 ++++--
 drivers/usb/host/xhci-dbgtty.c |  86 ++++++++++++-------
 drivers/usb/host/xhci-mem.c    |  10 +--
 drivers/usb/host/xhci.c        |  31 +++----
 drivers/usb/host/xhci.h        |   2 -
 7 files changed, 163 insertions(+), 150 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 11+ messages in thread
* [PATCH 1/9] xhci: dbc: refactor xhci_dbc_init()
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 2/9] xhci: dbc: create and remove dbc structure in dbgtty driver Mathias Nyman
                   ` (8 subsequent siblings)
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

Refactor xhci_dbc_init(), splitting it into logical
parts closer to the Linux device model.

- Create the fake dbc device, depends on xhci strucure
- Allocate a dbc structure, xhci agnostic
- Call xhci_dbc_tty_probe(), similar to actual probe.

Adjustments to xhci_dbc_exit and xhci_dbc_remove are also needed
as a result to the xhci_dbc_init() changes

Mostly non-functional changes, except for creating the dbc sysfs
entry earlier, together with the dbc structure.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-dbgcap.c | 124 ++++++++++++++++++---------------
 1 file changed, 66 insertions(+), 58 deletions(-)

diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index ccb0156fcebe..6a437862b498 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -924,49 +924,6 @@ static void xhci_do_dbc_exit(struct xhci_hcd *xhci)
 	spin_unlock_irqrestore(&xhci->lock, flags);
 }
 
-static int xhci_do_dbc_init(struct xhci_hcd *xhci)
-{
-	u32			reg;
-	struct xhci_dbc		*dbc;
-	unsigned long		flags;
-	void __iomem		*base;
-	int			dbc_cap_offs;
-
-	base = &xhci->cap_regs->hc_capbase;
-	dbc_cap_offs = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_DEBUG);
-	if (!dbc_cap_offs)
-		return -ENODEV;
-
-	dbc = kzalloc(sizeof(*dbc), GFP_KERNEL);
-	if (!dbc)
-		return -ENOMEM;
-
-	dbc->regs = base + dbc_cap_offs;
-
-	/* We will avoid using DbC in xhci driver if it's in use. */
-	reg = readl(&dbc->regs->control);
-	if (reg & DBC_CTRL_DBC_ENABLE) {
-		kfree(dbc);
-		return -EBUSY;
-	}
-
-	spin_lock_irqsave(&xhci->lock, flags);
-	if (xhci->dbc) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		kfree(dbc);
-		return -EBUSY;
-	}
-	xhci->dbc = dbc;
-	spin_unlock_irqrestore(&xhci->lock, flags);
-
-	dbc->xhci = xhci;
-	dbc->dev = xhci_to_hcd(xhci)->self.sysdev;
-	INIT_DELAYED_WORK(&dbc->event_work, xhci_dbc_handle_events);
-	spin_lock_init(&dbc->lock);
-
-	return 0;
-}
-
 static ssize_t dbc_show(struct device *dev,
 			struct device_attribute *attr,
 			char *buf)
@@ -1026,44 +983,95 @@ static ssize_t dbc_store(struct device *dev,
 
 static DEVICE_ATTR_RW(dbc);
 
-int xhci_dbc_init(struct xhci_hcd *xhci)
+struct xhci_dbc *
+xhci_alloc_dbc(struct device *dev, void __iomem *base)
 {
+	struct xhci_dbc		*dbc;
 	int			ret;
-	struct device		*dev = xhci_to_hcd(xhci)->self.controller;
 
-	ret = xhci_do_dbc_init(xhci);
+	dbc = kzalloc(sizeof(*dbc), GFP_KERNEL);
+	if (!dbc)
+		return NULL;
+
+	dbc->regs = base;
+	dbc->dev = dev;
+
+	if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE)
+		return NULL;
+
+	INIT_DELAYED_WORK(&dbc->event_work, xhci_dbc_handle_events);
+	spin_lock_init(&dbc->lock);
+
+	ret = device_create_file(dev, &dev_attr_dbc);
 	if (ret)
-		goto init_err3;
+		goto err;
+
+	return dbc;
+err:
+	kfree(dbc);
+	return NULL;
+}
+
+/* undo what xhci_alloc_dbc() did */
+void xhci_dbc_remove(struct xhci_dbc *dbc)
+{
+	if (!dbc)
+		return;
+	/* stop hw, stop wq and call dbc->ops->stop() */
+	xhci_dbc_stop(dbc);
+
+	/* remove sysfs files */
+	device_remove_file(dbc->dev, &dev_attr_dbc);
+
+	kfree(dbc);
+}
+
+int xhci_dbc_init(struct xhci_hcd *xhci)
+{
+	struct device		*dev;
+	void __iomem		*base;
+	int			ret;
+	int			dbc_cap_offs;
+
+	/* create all parameters needed resembling a dbc device */
+	dev = xhci_to_hcd(xhci)->self.controller;
+	base = &xhci->cap_regs->hc_capbase;
+
+	dbc_cap_offs = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_DEBUG);
+	if (!dbc_cap_offs)
+		return -ENODEV;
+
+	/* already allocated and in use */
+	if (xhci->dbc)
+		return -EBUSY;
+
+	xhci->dbc = xhci_alloc_dbc(dev, base);
+	if (!xhci->dbc)
+		return -ENOMEM;
 
 	ret = xhci_dbc_tty_probe(xhci);
 	if (ret)
 		goto init_err2;
 
-	ret = device_create_file(dev, &dev_attr_dbc);
-	if (ret)
-		goto init_err1;
-
 	return 0;
 
-init_err1:
-	xhci_dbc_tty_remove(xhci->dbc);
 init_err2:
 	xhci_do_dbc_exit(xhci);
-init_err3:
 	return ret;
 }
 
 void xhci_dbc_exit(struct xhci_hcd *xhci)
 {
-	struct device		*dev = xhci_to_hcd(xhci)->self.controller;
+	unsigned long		flags;
 
 	if (!xhci->dbc)
 		return;
 
-	device_remove_file(dev, &dev_attr_dbc);
 	xhci_dbc_tty_remove(xhci->dbc);
-	xhci_dbc_stop(xhci->dbc);
-	xhci_do_dbc_exit(xhci);
+	xhci_dbc_remove(xhci->dbc);
+	spin_lock_irqsave(&xhci->lock, flags);
+	xhci->dbc = NULL;
+	spin_unlock_irqrestore(&xhci->lock, flags);
 }
 
 #ifdef CONFIG_PM
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 2/9] xhci: dbc: create and remove dbc structure in dbgtty driver.
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
  2022-02-16  9:09 ` [PATCH 1/9] xhci: dbc: refactor xhci_dbc_init() Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 3/9] xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit Mathias Nyman
                   ` (7 subsequent siblings)
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

Turn the dbgtty closer to a device driver by allocating the dbc
structure in its own xhci_dbc_tty_probe() function, and freeing it
in xhci_dbc_tty_remove()

Remove xhci_do_dbc_exit() as its no longer needed.

allocate and create the dbc strcuture in xhci_dbc_tty_probe()

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-dbgcap.c | 26 +++-----------------------
 drivers/usb/host/xhci-dbgcap.h |  5 ++++-
 drivers/usb/host/xhci-dbgtty.c | 22 +++++++++++++++-------
 3 files changed, 22 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 6a437862b498..f4da5708a40f 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -914,16 +914,6 @@ static void xhci_dbc_handle_events(struct work_struct *work)
 	mod_delayed_work(system_wq, &dbc->event_work, 1);
 }
 
-static void xhci_do_dbc_exit(struct xhci_hcd *xhci)
-{
-	unsigned long		flags;
-
-	spin_lock_irqsave(&xhci->lock, flags);
-	kfree(xhci->dbc);
-	xhci->dbc = NULL;
-	spin_unlock_irqrestore(&xhci->lock, flags);
-}
-
 static ssize_t dbc_show(struct device *dev,
 			struct device_attribute *attr,
 			char *buf)
@@ -984,7 +974,7 @@ static ssize_t dbc_store(struct device *dev,
 static DEVICE_ATTR_RW(dbc);
 
 struct xhci_dbc *
-xhci_alloc_dbc(struct device *dev, void __iomem *base)
+xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver *driver)
 {
 	struct xhci_dbc		*dbc;
 	int			ret;
@@ -995,6 +985,7 @@ xhci_alloc_dbc(struct device *dev, void __iomem *base)
 
 	dbc->regs = base;
 	dbc->dev = dev;
+	dbc->driver = driver;
 
 	if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE)
 		return NULL;
@@ -1045,18 +1036,8 @@ int xhci_dbc_init(struct xhci_hcd *xhci)
 	if (xhci->dbc)
 		return -EBUSY;
 
-	xhci->dbc = xhci_alloc_dbc(dev, base);
-	if (!xhci->dbc)
-		return -ENOMEM;
-
-	ret = xhci_dbc_tty_probe(xhci);
-	if (ret)
-		goto init_err2;
-
-	return 0;
+	ret = xhci_dbc_tty_probe(dev, base + dbc_cap_offs, xhci);
 
-init_err2:
-	xhci_do_dbc_exit(xhci);
 	return ret;
 }
 
@@ -1068,7 +1049,6 @@ void xhci_dbc_exit(struct xhci_hcd *xhci)
 		return;
 
 	xhci_dbc_tty_remove(xhci->dbc);
-	xhci_dbc_remove(xhci->dbc);
 	spin_lock_irqsave(&xhci->lock, flags);
 	xhci->dbc = NULL;
 	spin_unlock_irqrestore(&xhci->lock, flags);
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index c70b78d504eb..5d8c7815491c 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -196,8 +196,11 @@ static inline struct dbc_ep *get_out_ep(struct xhci_dbc *dbc)
 #ifdef CONFIG_USB_XHCI_DBGCAP
 int xhci_dbc_init(struct xhci_hcd *xhci);
 void xhci_dbc_exit(struct xhci_hcd *xhci);
-int xhci_dbc_tty_probe(struct xhci_hcd *xhci);
+int xhci_dbc_tty_probe(struct device *dev, void __iomem *res, struct xhci_hcd *xhci);
 void xhci_dbc_tty_remove(struct xhci_dbc *dbc);
+struct xhci_dbc *xhci_alloc_dbc(struct device *dev, void __iomem *res,
+				 const struct dbc_driver *driver);
+void xhci_dbc_remove(struct xhci_dbc *dbc);
 struct dbc_request *dbc_alloc_request(struct xhci_dbc *dbc,
 				      unsigned int direction,
 				      gfp_t flags);
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index eb46e642e87a..18bcc96853ae 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -468,9 +468,9 @@ static const struct dbc_driver dbc_driver = {
 	.disconnect		= xhci_dbc_tty_unregister_device,
 };
 
-int xhci_dbc_tty_probe(struct xhci_hcd *xhci)
+int xhci_dbc_tty_probe(struct device *dev, void __iomem *base, struct xhci_hcd *xhci)
 {
-	struct xhci_dbc		*dbc = xhci->dbc;
+	struct xhci_dbc		*dbc;
 	struct dbc_port		*port;
 	int			status;
 
@@ -485,13 +485,22 @@ int xhci_dbc_tty_probe(struct xhci_hcd *xhci)
 		goto out;
 	}
 
-	dbc->driver = &dbc_driver;
-	dbc->priv = port;
+	dbc_tty_driver->driver_state = port;
+
+	dbc = xhci_alloc_dbc(dev, base, &dbc_driver);
+	if (!dbc) {
+		status = -ENOMEM;
+		goto out2;
+	}
 
+	dbc->priv = port;
 
-	dbc_tty_driver->driver_state = port;
+	/* get rid of xhci once this is a real driver binding to a device */
+	xhci->dbc = dbc;
 
 	return 0;
+out2:
+	kfree(port);
 out:
 	/* dbc_tty_exit will be called by module_exit() in the future */
 	dbc_tty_exit();
@@ -506,8 +515,7 @@ void xhci_dbc_tty_remove(struct xhci_dbc *dbc)
 {
 	struct dbc_port         *port = dbc_to_port(dbc);
 
-	dbc->driver = NULL;
-	dbc->priv = NULL;
+	xhci_dbc_remove(dbc);
 	kfree(port);
 
 	/* dbc_tty_exit will be called by  module_exit() in the future */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 3/9] xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
  2022-02-16  9:09 ` [PATCH 1/9] xhci: dbc: refactor xhci_dbc_init() Mathias Nyman
  2022-02-16  9:09 ` [PATCH 2/9] xhci: dbc: create and remove dbc structure in dbgtty driver Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 4/9] xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe Mathias Nyman
                   ` (6 subsequent siblings)
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

These names give the impressions the functions are related to
module init calls, but are in fact creating and removing the dbc
fake device

Rename them to xhci_creatre_dbc_dev() and xhci_remove_dbc_dev().

We will need the _init and _exit names for actual dbc module init
calls.

No functional changes

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-dbgcap.c | 5 +++--
 drivers/usb/host/xhci-dbgcap.h | 8 ++++----
 drivers/usb/host/xhci.c        | 4 ++--
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index f4da5708a40f..46c8f3c187f7 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -1017,7 +1017,8 @@ void xhci_dbc_remove(struct xhci_dbc *dbc)
 	kfree(dbc);
 }
 
-int xhci_dbc_init(struct xhci_hcd *xhci)
+
+int xhci_create_dbc_dev(struct xhci_hcd *xhci)
 {
 	struct device		*dev;
 	void __iomem		*base;
@@ -1041,7 +1042,7 @@ int xhci_dbc_init(struct xhci_hcd *xhci)
 	return ret;
 }
 
-void xhci_dbc_exit(struct xhci_hcd *xhci)
+void xhci_remove_dbc_dev(struct xhci_hcd *xhci)
 {
 	unsigned long		flags;
 
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 5d8c7815491c..8b5b363a0719 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -194,8 +194,8 @@ static inline struct dbc_ep *get_out_ep(struct xhci_dbc *dbc)
 }
 
 #ifdef CONFIG_USB_XHCI_DBGCAP
-int xhci_dbc_init(struct xhci_hcd *xhci);
-void xhci_dbc_exit(struct xhci_hcd *xhci);
+int xhci_create_dbc_dev(struct xhci_hcd *xhci);
+void xhci_remove_dbc_dev(struct xhci_hcd *xhci);
 int xhci_dbc_tty_probe(struct device *dev, void __iomem *res, struct xhci_hcd *xhci);
 void xhci_dbc_tty_remove(struct xhci_dbc *dbc);
 struct xhci_dbc *xhci_alloc_dbc(struct device *dev, void __iomem *res,
@@ -211,12 +211,12 @@ int xhci_dbc_suspend(struct xhci_hcd *xhci);
 int xhci_dbc_resume(struct xhci_hcd *xhci);
 #endif /* CONFIG_PM */
 #else
-static inline int xhci_dbc_init(struct xhci_hcd *xhci)
+static inline int xhci_create_dbc_dev(struct xhci_hcd *xhci)
 {
 	return 0;
 }
 
-static inline void xhci_dbc_exit(struct xhci_hcd *xhci)
+static inline void xhci_remove_dbc_dev(struct xhci_hcd *xhci)
 {
 }
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index dc357cabb265..ab1b5ff3fc99 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -695,7 +695,7 @@ int xhci_run(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Finished xhci_run for USB2 roothub");
 
-	xhci_dbc_init(xhci);
+	xhci_create_dbc_dev(xhci);
 
 	xhci_debugfs_init(xhci);
 
@@ -725,7 +725,7 @@ static void xhci_stop(struct usb_hcd *hcd)
 		return;
 	}
 
-	xhci_dbc_exit(xhci);
+	xhci_remove_dbc_dev(xhci);
 
 	spin_lock_irq(&xhci->lock);
 	xhci->xhc_state |= XHCI_STATE_HALTED;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 4/9] xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
                   ` (2 preceding siblings ...)
  2022-02-16  9:09 ` [PATCH 3/9] xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 5/9] xhci: dbgtty: use IDR to support several dbc instances Mathias Nyman
                   ` (5 subsequent siblings)
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

The current workaround to call the dbc_tty_init() in probe is
not working in case we have several xhci devices with dbc enabled.

dbc_tty_init() should be called only once by a module init call when
module is loaded.

until dbgtty is its own module call dbc_tty_init() from xhci
module init call.

Same is true for unloading and dbc_tty_exit()

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-dbgcap.c | 10 ++++++++++
 drivers/usb/host/xhci-dbgcap.h | 12 +++++++++++-
 drivers/usb/host/xhci-dbgtty.c | 26 +++++++-------------------
 drivers/usb/host/xhci.c        |  2 ++
 4 files changed, 30 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 46c8f3c187f7..e61155fa6379 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -1087,3 +1087,13 @@ int xhci_dbc_resume(struct xhci_hcd *xhci)
 	return ret;
 }
 #endif /* CONFIG_PM */
+
+int xhci_dbc_init(void)
+{
+	return dbc_tty_init();
+}
+
+void xhci_dbc_exit(void)
+{
+	dbc_tty_exit();
+}
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 8b5b363a0719..5f3304a06591 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -196,6 +196,10 @@ static inline struct dbc_ep *get_out_ep(struct xhci_dbc *dbc)
 #ifdef CONFIG_USB_XHCI_DBGCAP
 int xhci_create_dbc_dev(struct xhci_hcd *xhci);
 void xhci_remove_dbc_dev(struct xhci_hcd *xhci);
+int xhci_dbc_init(void);
+void xhci_dbc_exit(void);
+int dbc_tty_init(void);
+void dbc_tty_exit(void);
 int xhci_dbc_tty_probe(struct device *dev, void __iomem *res, struct xhci_hcd *xhci);
 void xhci_dbc_tty_remove(struct xhci_dbc *dbc);
 struct xhci_dbc *xhci_alloc_dbc(struct device *dev, void __iomem *res,
@@ -219,7 +223,13 @@ static inline int xhci_create_dbc_dev(struct xhci_hcd *xhci)
 static inline void xhci_remove_dbc_dev(struct xhci_hcd *xhci)
 {
 }
-
+static inline int xhci_dbc_init(void)
+{
+	return 0;
+}
+static inline void xhci_dbc_exit(void)
+{
+}
 static inline int xhci_dbc_suspend(struct xhci_hcd *xhci)
 {
 	return 0;
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index 18bcc96853ae..ad1db371e38d 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -14,9 +14,6 @@
 #include "xhci.h"
 #include "xhci-dbgcap.h"
 
-static int dbc_tty_init(void);
-static void dbc_tty_exit(void);
-
 static struct tty_driver *dbc_tty_driver;
 
 static inline struct dbc_port *dbc_to_port(struct xhci_dbc *dbc)
@@ -474,16 +471,12 @@ int xhci_dbc_tty_probe(struct device *dev, void __iomem *base, struct xhci_hcd *
 	struct dbc_port		*port;
 	int			status;
 
-	/* dbc_tty_init will be called by module init() in the future */
-	status = dbc_tty_init();
-	if (status)
-		return status;
+	if (!dbc_tty_driver)
+		return -ENODEV; // MATTU FIXME is this ok??
 
 	port = kzalloc(sizeof(*port), GFP_KERNEL);
-	if (!port) {
-		status = -ENOMEM;
-		goto out;
-	}
+	if (!port)
+		return -ENOMEM;
 
 	dbc_tty_driver->driver_state = port;
 
@@ -501,9 +494,7 @@ int xhci_dbc_tty_probe(struct device *dev, void __iomem *base, struct xhci_hcd *
 	return 0;
 out2:
 	kfree(port);
-out:
-	/* dbc_tty_exit will be called by module_exit() in the future */
-	dbc_tty_exit();
+
 	return status;
 }
 
@@ -517,12 +508,9 @@ void xhci_dbc_tty_remove(struct xhci_dbc *dbc)
 
 	xhci_dbc_remove(dbc);
 	kfree(port);
-
-	/* dbc_tty_exit will be called by  module_exit() in the future */
-	dbc_tty_exit();
 }
 
-static int dbc_tty_init(void)
+int dbc_tty_init(void)
 {
 	int		ret;
 
@@ -552,7 +540,7 @@ static int dbc_tty_init(void)
 	return ret;
 }
 
-static void dbc_tty_exit(void)
+void dbc_tty_exit(void)
 {
 	if (dbc_tty_driver) {
 		tty_unregister_driver(dbc_tty_driver);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ab1b5ff3fc99..17a561abfab7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5495,6 +5495,7 @@ static int __init xhci_hcd_init(void)
 		return -ENODEV;
 
 	xhci_debugfs_create_root();
+	xhci_dbc_init();
 
 	return 0;
 }
@@ -5506,6 +5507,7 @@ static int __init xhci_hcd_init(void)
 static void __exit xhci_hcd_fini(void)
 {
 	xhci_debugfs_remove_root();
+	xhci_dbc_exit();
 }
 
 module_init(xhci_hcd_init);
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 5/9] xhci: dbgtty: use IDR to support several dbc instances.
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
                   ` (3 preceding siblings ...)
  2022-02-16  9:09 ` [PATCH 4/9] xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 6/9] xhci: Allocate separate command structures for each LPM command Mathias Nyman
                   ` (4 subsequent siblings)
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

To support systems with several xhci controllers with active
dbc on each xhci we need to use IDR to identify and give
an index to each port.

Avoid using global struct tty_driver.driver_state for storing
dbc port pointer as it won't work with several dbc ports

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-dbgcap.h |  1 +
 drivers/usb/host/xhci-dbgtty.c | 46 ++++++++++++++++++++++++++++------
 2 files changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 5f3304a06591..ca04192fdab1 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -100,6 +100,7 @@ struct dbc_ep {
 struct dbc_port {
 	struct tty_port			port;
 	spinlock_t			port_lock;	/* port access */
+	int				minor;
 
 	struct list_head		read_pool;
 	struct list_head		read_queue;
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index ad1db371e38d..39a71bdc8d32 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -10,11 +10,14 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
+#include <linux/idr.h>
 
 #include "xhci.h"
 #include "xhci-dbgcap.h"
 
 static struct tty_driver *dbc_tty_driver;
+static struct idr dbc_tty_minors;
+static DEFINE_MUTEX(dbc_tty_minors_lock);
 
 static inline struct dbc_port *dbc_to_port(struct xhci_dbc *dbc)
 {
@@ -177,7 +180,14 @@ xhci_dbc_free_requests(struct list_head *head)
 
 static int dbc_tty_install(struct tty_driver *driver, struct tty_struct *tty)
 {
-	struct dbc_port		*port = driver->driver_state;
+	struct dbc_port		*port;
+
+	mutex_lock(&dbc_tty_minors_lock);
+	port = idr_find(&dbc_tty_minors, tty->index);
+	mutex_unlock(&dbc_tty_minors_lock);
+
+	if (!port)
+		return -ENXIO;
 
 	tty->driver_data = port;
 
@@ -406,6 +416,15 @@ static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc)
 
 	xhci_dbc_tty_init_port(dbc, port);
 
+	mutex_lock(&dbc_tty_minors_lock);
+	port->minor = idr_alloc(&dbc_tty_minors, port, 0, 64, GFP_KERNEL);
+	mutex_unlock(&dbc_tty_minors_lock);
+
+	if (port->minor < 0) {
+		ret = port->minor;
+		goto err_idr;
+	}
+
 	ret = kfifo_alloc(&port->write_fifo, DBC_WRITE_BUF_SIZE, GFP_KERNEL);
 	if (ret)
 		goto err_exit_port;
@@ -421,7 +440,7 @@ static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc)
 		goto err_free_requests;
 
 	tty_dev = tty_port_register_device(&port->port,
-					   dbc_tty_driver, 0, NULL);
+					   dbc_tty_driver, port->minor, NULL);
 	if (IS_ERR(tty_dev)) {
 		ret = PTR_ERR(tty_dev);
 		goto err_free_requests;
@@ -437,6 +456,8 @@ static int xhci_dbc_tty_register_device(struct xhci_dbc *dbc)
 err_free_fifo:
 	kfifo_free(&port->write_fifo);
 err_exit_port:
+	idr_remove(&dbc_tty_minors, port->minor);
+err_idr:
 	xhci_dbc_tty_exit_port(port);
 
 	dev_err(dbc->dev, "can't register tty port, err %d\n", ret);
@@ -450,10 +471,14 @@ static void xhci_dbc_tty_unregister_device(struct xhci_dbc *dbc)
 
 	if (!port->registered)
 		return;
-	tty_unregister_device(dbc_tty_driver, 0);
+	tty_unregister_device(dbc_tty_driver, port->minor);
 	xhci_dbc_tty_exit_port(port);
 	port->registered = false;
 
+	mutex_lock(&dbc_tty_minors_lock);
+	idr_remove(&dbc_tty_minors, port->minor);
+	mutex_unlock(&dbc_tty_minors_lock);
+
 	kfifo_free(&port->write_fifo);
 	xhci_dbc_free_requests(&port->read_pool);
 	xhci_dbc_free_requests(&port->read_queue);
@@ -478,9 +503,8 @@ int xhci_dbc_tty_probe(struct device *dev, void __iomem *base, struct xhci_hcd *
 	if (!port)
 		return -ENOMEM;
 
-	dbc_tty_driver->driver_state = port;
-
 	dbc = xhci_alloc_dbc(dev, base, &dbc_driver);
+
 	if (!dbc) {
 		status = -ENOMEM;
 		goto out2;
@@ -514,10 +538,14 @@ int dbc_tty_init(void)
 {
 	int		ret;
 
-	dbc_tty_driver = tty_alloc_driver(1, TTY_DRIVER_REAL_RAW |
+	idr_init(&dbc_tty_minors);
+
+	dbc_tty_driver = tty_alloc_driver(64, TTY_DRIVER_REAL_RAW |
 					  TTY_DRIVER_DYNAMIC_DEV);
-	if (IS_ERR(dbc_tty_driver))
+	if (IS_ERR(dbc_tty_driver)) {
+		idr_destroy(&dbc_tty_minors);
 		return PTR_ERR(dbc_tty_driver);
+	}
 
 	dbc_tty_driver->driver_name = "dbc_serial";
 	dbc_tty_driver->name = "ttyDBC";
@@ -536,7 +564,9 @@ int dbc_tty_init(void)
 	if (ret) {
 		pr_err("Can't register dbc tty driver\n");
 		tty_driver_kref_put(dbc_tty_driver);
+		idr_destroy(&dbc_tty_minors);
 	}
+
 	return ret;
 }
 
@@ -547,4 +577,6 @@ void dbc_tty_exit(void)
 		tty_driver_kref_put(dbc_tty_driver);
 		dbc_tty_driver = NULL;
 	}
+
+	idr_destroy(&dbc_tty_minors);
 }
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 6/9] xhci: Allocate separate command structures for each LPM command
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
                   ` (4 preceding siblings ...)
  2022-02-16  9:09 ` [PATCH 5/9] xhci: dbgtty: use IDR to support several dbc instances Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 7/9] usb: remove Link Powermanagement (LPM) disable before port reset Mathias Nyman
                   ` (3 subsequent siblings)
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman

Every lpm commmand, both for USB 2 and USB 3 devies used the same
xhci->lpm_command structure to change max exit latency.

xhci->lpm_command is only protected by a hcd->bandwidth mutex, which is
not enoungh as USB 2 and USB 3 devices are behind separate HCDs.

Simplify code and avoid unnecessary locking risks by allocating
separate command structures for each lpm command, just like with
all other commands.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-mem.c |  7 -------
 drivers/usb/host/xhci.c     | 21 ++++++++-------------
 drivers/usb/host/xhci.h     |  2 --
 3 files changed, 8 insertions(+), 22 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0e312066c5c6..7a2dce730e9a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1846,9 +1846,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->event_ring = NULL;
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed event ring");
 
-	if (xhci->lpm_command)
-		xhci_free_command(xhci, xhci->lpm_command);
-	xhci->lpm_command = NULL;
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -2488,10 +2485,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 			"// Setting command ring address to 0x%016llx", val_64);
 	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
 
-	xhci->lpm_command = xhci_alloc_command_with_ctx(xhci, true, flags);
-	if (!xhci->lpm_command)
-		goto fail;
-
 	/* Reserve one command ring TRB for disabling LPM.
 	 * Since the USB core grabs the shared usb_bus bandwidth mutex before
 	 * disabling LPM, we only need to reserve one TRB for all devices.
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 17a561abfab7..2a58677d9b7a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4344,6 +4344,10 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	unsigned long flags;
 	int ret;
 
+	command = xhci_alloc_command_with_ctx(xhci, true, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	virt_dev = xhci->devs[udev->slot_id];
@@ -4360,10 +4364,10 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	}
 
 	/* Attempt to issue an Evaluate Context command to change the MEL. */
-	command = xhci->lpm_command;
 	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
 	if (!ctrl_ctx) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, command);
 		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
 				__func__);
 		return -ENOMEM;
@@ -4390,6 +4394,9 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 		virt_dev->current_mel = max_exit_latency;
 		spin_unlock_irqrestore(&xhci->lock, flags);
 	}
+
+	xhci_free_command(xhci, command);
+
 	return ret;
 }
 
@@ -4510,18 +4517,8 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 			exit_latency = xhci_besl_encoding[hird];
 			spin_unlock_irqrestore(&xhci->lock, flags);
 
-			/* USB 3.0 code dedicate one xhci->lpm_command->in_ctx
-			 * input context for link powermanagement evaluate
-			 * context commands. It is protected by hcd->bandwidth
-			 * mutex and is shared by all devices. We need to set
-			 * the max ext latency in USB 2 BESL LPM as well, so
-			 * use the same mutex and xhci_change_max_exit_latency()
-			 */
-			mutex_lock(hcd->bandwidth_mutex);
 			ret = xhci_change_max_exit_latency(xhci, udev,
 							   exit_latency);
-			mutex_unlock(hcd->bandwidth_mutex);
-
 			if (ret < 0)
 				return ret;
 			spin_lock_irqsave(&xhci->lock, flags);
@@ -4549,9 +4546,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 		readl(pm_addr);
 		if (udev->usb2_hw_lpm_besl_capable) {
 			spin_unlock_irqrestore(&xhci->lock, flags);
-			mutex_lock(hcd->bandwidth_mutex);
 			xhci_change_max_exit_latency(xhci, udev, 0);
-			mutex_unlock(hcd->bandwidth_mutex);
 			readl_poll_timeout(ports[port_num]->addr, pm_val,
 					   (pm_val & PORT_PLS_MASK) == XDEV_U0,
 					   100, 10000);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 5a75fe563123..8a0026ee9524 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1812,8 +1812,6 @@ struct xhci_hcd {
 	/* slot enabling and address device helpers */
 	/* these are not thread safe so use mutex */
 	struct mutex mutex;
-	/* For USB 3.0 LPM enable/disable. */
-	struct xhci_command		*lpm_command;
 	/* Internal mirror of the HW's dcbaa */
 	struct xhci_virt_device	*devs[MAX_HC_SLOTS];
 	/* For keeping track of bandwidth domains per roothub. */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 7/9] usb: remove Link Powermanagement (LPM) disable before port reset.
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
                   ` (5 preceding siblings ...)
  2022-02-16  9:09 ` [PATCH 6/9] xhci: Allocate separate command structures for each LPM command Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 8/9] usb: host: xhci: drop redundant checks Mathias Nyman
                   ` (2 subsequent siblings)
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Mathias Nyman, Alan Stern

Trying to disable Link Powermanagement (LPM) before port reset is
unnecessary and can cause additional delay if host can't communicate
with the device, which is often the reason why device is reset in the
first place.

usb_disable_lpm() will
- zero usb U1/U2 timeouts for the hub downstream port
- send ENABLE U1/U2 clear feature requests to the connected device.
- increase internal reference count for udev->lpm_disable_count

There is no need to zero U1/U2 hub port timeouts, or clearing the
U1/U2 enable for the connected device before reset. These are set
to default by the reset.

USB 3.1 section 10.2.2 "HUB Downstream port U1/U2 timers" states that:
"the U1 and U2 timeout values for a downstream port reset to the default
values when the port receives a SetPortFeature request for a port reset"

Set the udev->lpm_disable_count to "1" after port reset, which is the
default lpm_disable_count value when allocating udev, representing
disabled LPM.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/core/hub.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 47a1c8bddf86..b8853219833a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5005,6 +5005,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
 			udev->lpm_capable = usb_device_supports_lpm(udev);
+			udev->lpm_disable_count = 1;
 			usb_set_lpm_parameters(udev);
 		}
 	}
@@ -5928,16 +5929,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	 */
 	usb_disable_usb2_hardware_lpm(udev);
 
-	/* Disable LPM while we reset the device and reinstall the alt settings.
-	 * Device-initiated LPM, and system exit latency settings are cleared
-	 * when the device is reset, so we have to set them up again.
-	 */
-	ret = usb_unlocked_disable_lpm(udev);
-	if (ret) {
-		dev_err(&udev->dev, "%s Failed to disable LPM\n", __func__);
-		goto re_enumerate_no_bos;
-	}
-
 	bos = udev->bos;
 	udev->bos = NULL;
 
@@ -6042,8 +6033,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 re_enumerate:
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
-re_enumerate_no_bos:
-	/* LPM state doesn't matter when we're about to destroy the device. */
 	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 8/9] usb: host: xhci: drop redundant checks
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
                   ` (6 preceding siblings ...)
  2022-02-16  9:09 ` [PATCH 7/9] usb: remove Link Powermanagement (LPM) disable before port reset Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:09 ` [PATCH 9/9] usb: xhci: fix minmax.cocci warnings Mathias Nyman
  2022-02-16  9:21 ` [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Sergey Shtylyov, Mathias Nyman

From: Sergey Shtylyov <s.shtylyov@omp.ru>

In xhci_endpoint_{disable|reset}() the expression '&vdev->eps[ep_index]'
just cannot be NULL, so the checks have no sense at all...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2a58677d9b7a..33bae434aa94 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3150,8 +3150,6 @@ static void xhci_endpoint_disable(struct usb_hcd *hcd,
 
 	ep_index = xhci_get_endpoint_index(&host_ep->desc);
 	ep = &vdev->eps[ep_index];
-	if (!ep)
-		goto done;
 
 	/* wait for hub_tt_work to finish clearing hub TT */
 	if (ep->ep_state & EP_CLEARING_TT) {
@@ -3209,8 +3207,6 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 		return;
 	ep_index = xhci_get_endpoint_index(&host_ep->desc);
 	ep = &vdev->eps[ep_index];
-	if (!ep)
-		return;
 
 	/* Bail out if toggle is already being cleared by a endpoint reset */
 	spin_lock_irqsave(&xhci->lock, flags);
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH 9/9] usb: xhci: fix minmax.cocci warnings
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
                   ` (7 preceding siblings ...)
  2022-02-16  9:09 ` [PATCH 8/9] usb: host: xhci: drop redundant checks Mathias Nyman
@ 2022-02-16  9:09 ` Mathias Nyman
  2022-02-16  9:21 ` [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:09 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, kernel test robot, Julia Lawall, Mathias Nyman

From: kernel test robot <lkp@intel.com>

Simplify the code using max().

Generated by: scripts/coccinelle/misc/minmax.cocci

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-mem.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 7a2dce730e9a..f8c2b6c79543 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -433,8 +433,7 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
 				(TRBS_PER_SEGMENT - 1);
 
 	/* Allocate number of segments we needed, or double the ring size */
-	num_segs = ring->num_segs > num_segs_needed ?
-			ring->num_segs : num_segs_needed;
+	num_segs = max(ring->num_segs, num_segs_needed);
 
 	ret = xhci_alloc_segments_for_ring(xhci, &first, &last,
 			num_segs, ring->cycle_state, ring->type,
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* Re: [PATCH 0/9] xhci and hub features for usb-next
  2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
                   ` (8 preceding siblings ...)
  2022-02-16  9:09 ` [PATCH 9/9] usb: xhci: fix minmax.cocci warnings Mathias Nyman
@ 2022-02-16  9:21 ` Mathias Nyman
  9 siblings, 0 replies; 11+ messages in thread
From: Mathias Nyman @ 2022-02-16  9:21 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb

On 16.2.2022 11.09, Mathias Nyman wrote:
> Hi Greg
> 
> This series mostly adds support for running xhci DbC on more than one
> xHC controller in a setup at the same time.
> 
> There are also some link power management changes, of which one touches
> usb core hub code, removing an extra LPM disable before device reset.
> 
> Thanks
> -Mathias


Argh, ignore this. Merged DbC patches from wrong branch

Will resend v2

-Mathias

^ permalink raw reply	[flat|nested] 11+ messages in thread
end of thread, other threads:[~2022-02-16  9:20 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-16  9:09 [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman
2022-02-16  9:09 ` [PATCH 1/9] xhci: dbc: refactor xhci_dbc_init() Mathias Nyman
2022-02-16  9:09 ` [PATCH 2/9] xhci: dbc: create and remove dbc structure in dbgtty driver Mathias Nyman
2022-02-16  9:09 ` [PATCH 3/9] xhci: dbc: Rename xhci_dbc_init and xhci_dbc_exit Mathias Nyman
2022-02-16  9:09 ` [PATCH 4/9] xhci: dbc: Don't call dbc_tty_init() on every dbc tty probe Mathias Nyman
2022-02-16  9:09 ` [PATCH 5/9] xhci: dbgtty: use IDR to support several dbc instances Mathias Nyman
2022-02-16  9:09 ` [PATCH 6/9] xhci: Allocate separate command structures for each LPM command Mathias Nyman
2022-02-16  9:09 ` [PATCH 7/9] usb: remove Link Powermanagement (LPM) disable before port reset Mathias Nyman
2022-02-16  9:09 ` [PATCH 8/9] usb: host: xhci: drop redundant checks Mathias Nyman
2022-02-16  9:09 ` [PATCH 9/9] usb: xhci: fix minmax.cocci warnings Mathias Nyman
2022-02-16  9:21 ` [PATCH 0/9] xhci and hub features for usb-next Mathias Nyman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.