* [PATCH v6 0/5] drm/tiny: Add MIPI DBI compatible SPI driver
@ 2022-02-27 12:47 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: sam, maxime, dave.stevenson, david, devicetree, thierry.reding,
Noralf Trønnes
Hi,
This patchset adds a driver that will work with most MIPI DBI compatible
SPI panels out there.
One change this time: Fix indentation in the DT binding.
All patches are reviewed now so I will apply this after Rob's bot have
looked at the binding.
Thanks for reviewing!
Noralf.
Noralf Trønnes (5):
dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
drm/modes: Remove trailing whitespace
drm/modes: Add of_get_drm_panel_display_mode()
drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
drm/tiny: Add MIPI DBI compatible SPI driver
.../display/panel/panel-mipi-dbi-spi.yaml | 126 ++++++
MAINTAINERS | 8 +
drivers/gpu/drm/drm_modes.c | 51 ++-
drivers/gpu/drm/tiny/Kconfig | 15 +
drivers/gpu/drm/tiny/Makefile | 1 +
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 398 ++++++++++++++++++
include/drm/drm_mipi_dbi.h | 8 +
include/drm/drm_modes.h | 8 +
8 files changed, 614 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
create mode 100644 drivers/gpu/drm/tiny/panel-mipi-dbi.c
--
2.33.0
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 0/5] drm/tiny: Add MIPI DBI compatible SPI driver
@ 2022-02-27 12:47 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: devicetree, Noralf Trønnes, david, dave.stevenson,
thierry.reding, maxime, sam
Hi,
This patchset adds a driver that will work with most MIPI DBI compatible
SPI panels out there.
One change this time: Fix indentation in the DT binding.
All patches are reviewed now so I will apply this after Rob's bot have
looked at the binding.
Thanks for reviewing!
Noralf.
Noralf Trønnes (5):
dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
drm/modes: Remove trailing whitespace
drm/modes: Add of_get_drm_panel_display_mode()
drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
drm/tiny: Add MIPI DBI compatible SPI driver
.../display/panel/panel-mipi-dbi-spi.yaml | 126 ++++++
MAINTAINERS | 8 +
drivers/gpu/drm/drm_modes.c | 51 ++-
drivers/gpu/drm/tiny/Kconfig | 15 +
drivers/gpu/drm/tiny/Makefile | 1 +
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 398 ++++++++++++++++++
include/drm/drm_mipi_dbi.h | 8 +
include/drm/drm_modes.h | 8 +
8 files changed, 614 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
create mode 100644 drivers/gpu/drm/tiny/panel-mipi-dbi.c
--
2.33.0
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v6 1/5] dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-27 12:47 ` Noralf Trønnes
-1 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: sam, maxime, dave.stevenson, david, devicetree, thierry.reding,
Noralf Trønnes, Rob Herring
Add binding for MIPI DBI compatible SPI panels.
v6:
- Fix indentation (Rob)
v5:
- Add sainsmart18 to compatible items (Rob)
- Expand write-only description (Sam)
v4:
- There should only be two compatible (Maxime)
- s/panel-dbi-spi/panel-mipi-dbi-spi/in compatible
v3:
- Move properties to Device Tree (Maxime)
- Use contains for compatible (Maxime)
- Add backlight property to example
- Flesh out description
v2:
- Fix path for panel-common.yaml
- Use unevaluatedProperties
- Drop properties which are in the allOf section
- Drop model property (Rob)
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
.../display/panel/panel-mipi-dbi-spi.yaml | 126 ++++++++++++++++++
1 file changed, 126 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 000000000000..f29789994b18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+ - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+ This binding is for display panels using a MIPI DBI compatible controller
+ in SPI mode.
+
+ The MIPI Alliance Standard for Display Bus Interface defines the electrical
+ and logical interfaces for display controllers historically used in mobile
+ phones. The standard defines 4 display architecture types and this binding is
+ for type 1 which has full frame memory. There are 3 interface types in the
+ standard and type C is the serial interface.
+
+ The standard defines the following interface signals for type C:
+ - Power:
+ - Vdd: Power supply for display module
+ - Vddi: Logic level supply for interface signals
+ Combined into one in this binding called: power-supply
+ - Interface:
+ - CSx: Chip select
+ - SCL: Serial clock
+ - Dout: Serial out
+ - Din: Serial in
+ - SDA: Bidrectional in/out
+ - D/CX: Data/command selection, high=data, low=command
+ Called dc-gpios in this binding.
+ - RESX: Reset when low
+ Called reset-gpios in this binding.
+
+ The type C interface has 3 options:
+
+ - Option 1: 9-bit mode and D/CX as the 9th bit
+ | Command | the next command or following data |
+ |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 2: 16-bit mode and D/CX as a 9th bit
+ | Command or data |
+ |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 3: 8-bit mode and D/CX as a separate interface line
+ | Command or data |
+ |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ The panel resolution is specified using the panel-timing node properties
+ hactive (width) and vactive (height). The other mandatory panel-timing
+ properties should be set to zero except clock-frequency which can be
+ optionally set to inform about the actual pixel clock frequency.
+
+ If the panel is wired to the controller at an offset specify this using
+ hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sainsmart18
+ - const: panel-mipi-dbi-spi
+
+ write-only:
+ type: boolean
+ description:
+ Controller is not readable (ie. Din (MISO on the SPI interface) is not
+ wired up).
+
+ dc-gpios:
+ maxItems: 1
+ description: |
+ Controller data/command selection (D/CX) in 4-line SPI mode.
+ If not set, the controller is in 3-line SPI mode.
+
+required:
+ - compatible
+ - reg
+ - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0{
+ compatible = "sainsmart18", "panel-mipi-dbi-spi";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ write-only;
+
+ backlight = <&backlight>;
+
+ width-mm = <35>;
+ height-mm = <28>;
+
+ panel-timing {
+ hactive = <160>;
+ vactive = <128>;
+ hback-porch = <0>;
+ vback-porch = <0>;
+ clock-frequency = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ };
+ };
+ };
+
+...
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 1/5] dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
@ 2022-02-27 12:47 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: devicetree, Noralf Trønnes, david, dave.stevenson,
thierry.reding, maxime, sam
Add binding for MIPI DBI compatible SPI panels.
v6:
- Fix indentation (Rob)
v5:
- Add sainsmart18 to compatible items (Rob)
- Expand write-only description (Sam)
v4:
- There should only be two compatible (Maxime)
- s/panel-dbi-spi/panel-mipi-dbi-spi/in compatible
v3:
- Move properties to Device Tree (Maxime)
- Use contains for compatible (Maxime)
- Add backlight property to example
- Flesh out description
v2:
- Fix path for panel-common.yaml
- Use unevaluatedProperties
- Drop properties which are in the allOf section
- Drop model property (Rob)
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
.../display/panel/panel-mipi-dbi-spi.yaml | 126 ++++++++++++++++++
1 file changed, 126 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 000000000000..f29789994b18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+ - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+ This binding is for display panels using a MIPI DBI compatible controller
+ in SPI mode.
+
+ The MIPI Alliance Standard for Display Bus Interface defines the electrical
+ and logical interfaces for display controllers historically used in mobile
+ phones. The standard defines 4 display architecture types and this binding is
+ for type 1 which has full frame memory. There are 3 interface types in the
+ standard and type C is the serial interface.
+
+ The standard defines the following interface signals for type C:
+ - Power:
+ - Vdd: Power supply for display module
+ - Vddi: Logic level supply for interface signals
+ Combined into one in this binding called: power-supply
+ - Interface:
+ - CSx: Chip select
+ - SCL: Serial clock
+ - Dout: Serial out
+ - Din: Serial in
+ - SDA: Bidrectional in/out
+ - D/CX: Data/command selection, high=data, low=command
+ Called dc-gpios in this binding.
+ - RESX: Reset when low
+ Called reset-gpios in this binding.
+
+ The type C interface has 3 options:
+
+ - Option 1: 9-bit mode and D/CX as the 9th bit
+ | Command | the next command or following data |
+ |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 2: 16-bit mode and D/CX as a 9th bit
+ | Command or data |
+ |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 3: 8-bit mode and D/CX as a separate interface line
+ | Command or data |
+ |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ The panel resolution is specified using the panel-timing node properties
+ hactive (width) and vactive (height). The other mandatory panel-timing
+ properties should be set to zero except clock-frequency which can be
+ optionally set to inform about the actual pixel clock frequency.
+
+ If the panel is wired to the controller at an offset specify this using
+ hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sainsmart18
+ - const: panel-mipi-dbi-spi
+
+ write-only:
+ type: boolean
+ description:
+ Controller is not readable (ie. Din (MISO on the SPI interface) is not
+ wired up).
+
+ dc-gpios:
+ maxItems: 1
+ description: |
+ Controller data/command selection (D/CX) in 4-line SPI mode.
+ If not set, the controller is in 3-line SPI mode.
+
+required:
+ - compatible
+ - reg
+ - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0{
+ compatible = "sainsmart18", "panel-mipi-dbi-spi";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ write-only;
+
+ backlight = <&backlight>;
+
+ width-mm = <35>;
+ height-mm = <28>;
+
+ panel-timing {
+ hactive = <160>;
+ vactive = <128>;
+ hback-porch = <0>;
+ vback-porch = <0>;
+ clock-frequency = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ };
+ };
+ };
+
+...
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 2/5] drm/modes: Remove trailing whitespace
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-27 12:47 ` Noralf Trønnes
-1 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: sam, maxime, dave.stevenson, david, devicetree, thierry.reding,
Noralf Trønnes
Remove trailing whitespace from a comment.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/gpu/drm/drm_modes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 96b13e36293c..77a4c8dd0bb8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(drm_mode_probed_add);
* according to the hdisplay, vdisplay, vrefresh.
* It is based from the VESA(TM) Coordinated Video Timing Generator by
* Graham Loveridge April 9, 2003 available at
- * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
+ * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
*
* And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
* What I have done is to translate it by using integer calculation.
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 2/5] drm/modes: Remove trailing whitespace
@ 2022-02-27 12:47 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: devicetree, Noralf Trønnes, david, dave.stevenson,
thierry.reding, maxime, sam
Remove trailing whitespace from a comment.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/gpu/drm/drm_modes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 96b13e36293c..77a4c8dd0bb8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(drm_mode_probed_add);
* according to the hdisplay, vdisplay, vrefresh.
* It is based from the VESA(TM) Coordinated Video Timing Generator by
* Graham Loveridge April 9, 2003 available at
- * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
+ * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
*
* And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
* What I have done is to translate it by using integer calculation.
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 3/5] drm/modes: Add of_get_drm_panel_display_mode()
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-27 12:47 ` Noralf Trønnes
-1 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: sam, maxime, dave.stevenson, david, devicetree, thierry.reding,
Noralf Trønnes
Add a function to get a drm_display_mode from a panel-timing
device tree subnode.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/gpu/drm/drm_modes.c | 49 +++++++++++++++++++++++++++++++++++++
include/drm/drm_modes.h | 8 ++++++
2 files changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 77a4c8dd0bb8..3f819c7a021b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -35,6 +35,7 @@
#include <linux/list_sort.h>
#include <linux/export.h>
+#include <video/of_display_timing.h>
#include <video/of_videomode.h>
#include <video/videomode.h>
@@ -727,6 +728,54 @@ int of_get_drm_display_mode(struct device_node *np,
return 0;
}
EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
+
+/**
+ * of_get_drm_panel_display_mode - get a panel-timing drm_display_mode from devicetree
+ * @np: device_node with the panel-timing specification
+ * @dmode: will be set to the return value
+ * @bus_flags: information about pixelclk, sync and DE polarity
+ *
+ * The Device Tree properties width-mm and height-mm will be read and set on
+ * the display mode if they are present.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int of_get_drm_panel_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode, u32 *bus_flags)
+{
+ u32 width_mm = 0, height_mm = 0;
+ struct display_timing timing;
+ struct videomode vm;
+ int ret;
+
+ ret = of_get_display_timing(np, "panel-timing", &timing);
+ if (ret)
+ return ret;
+
+ videomode_from_timing(&timing, &vm);
+
+ memset(dmode, 0, sizeof(*dmode));
+ drm_display_mode_from_videomode(&vm, dmode);
+ if (bus_flags)
+ drm_bus_flags_from_videomode(&vm, bus_flags);
+
+ ret = of_property_read_u32(np, "width-mm", &width_mm);
+ if (ret && ret != -EINVAL)
+ return ret;
+
+ ret = of_property_read_u32(np, "height-mm", &height_mm);
+ if (ret && ret != -EINVAL)
+ return ret;
+
+ dmode->width_mm = width_mm;
+ dmode->height_mm = height_mm;
+
+ drm_mode_debug_printmodeline(dmode);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_drm_panel_display_mode);
#endif /* CONFIG_OF */
#endif /* CONFIG_VIDEOMODE_HELPERS */
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index 29ba4adf0c53..2fa6b2c33b3f 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -466,6 +466,8 @@ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
int of_get_drm_display_mode(struct device_node *np,
struct drm_display_mode *dmode, u32 *bus_flags,
int index);
+int of_get_drm_panel_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode, u32 *bus_flags);
#else
static inline int of_get_drm_display_mode(struct device_node *np,
struct drm_display_mode *dmode,
@@ -473,6 +475,12 @@ static inline int of_get_drm_display_mode(struct device_node *np,
{
return -EINVAL;
}
+
+static inline int of_get_drm_panel_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode, u32 *bus_flags)
+{
+ return -EINVAL;
+}
#endif
void drm_mode_set_name(struct drm_display_mode *mode);
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 3/5] drm/modes: Add of_get_drm_panel_display_mode()
@ 2022-02-27 12:47 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: devicetree, Noralf Trønnes, david, dave.stevenson,
thierry.reding, maxime, sam
Add a function to get a drm_display_mode from a panel-timing
device tree subnode.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/gpu/drm/drm_modes.c | 49 +++++++++++++++++++++++++++++++++++++
include/drm/drm_modes.h | 8 ++++++
2 files changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 77a4c8dd0bb8..3f819c7a021b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -35,6 +35,7 @@
#include <linux/list_sort.h>
#include <linux/export.h>
+#include <video/of_display_timing.h>
#include <video/of_videomode.h>
#include <video/videomode.h>
@@ -727,6 +728,54 @@ int of_get_drm_display_mode(struct device_node *np,
return 0;
}
EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
+
+/**
+ * of_get_drm_panel_display_mode - get a panel-timing drm_display_mode from devicetree
+ * @np: device_node with the panel-timing specification
+ * @dmode: will be set to the return value
+ * @bus_flags: information about pixelclk, sync and DE polarity
+ *
+ * The Device Tree properties width-mm and height-mm will be read and set on
+ * the display mode if they are present.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int of_get_drm_panel_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode, u32 *bus_flags)
+{
+ u32 width_mm = 0, height_mm = 0;
+ struct display_timing timing;
+ struct videomode vm;
+ int ret;
+
+ ret = of_get_display_timing(np, "panel-timing", &timing);
+ if (ret)
+ return ret;
+
+ videomode_from_timing(&timing, &vm);
+
+ memset(dmode, 0, sizeof(*dmode));
+ drm_display_mode_from_videomode(&vm, dmode);
+ if (bus_flags)
+ drm_bus_flags_from_videomode(&vm, bus_flags);
+
+ ret = of_property_read_u32(np, "width-mm", &width_mm);
+ if (ret && ret != -EINVAL)
+ return ret;
+
+ ret = of_property_read_u32(np, "height-mm", &height_mm);
+ if (ret && ret != -EINVAL)
+ return ret;
+
+ dmode->width_mm = width_mm;
+ dmode->height_mm = height_mm;
+
+ drm_mode_debug_printmodeline(dmode);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_drm_panel_display_mode);
#endif /* CONFIG_OF */
#endif /* CONFIG_VIDEOMODE_HELPERS */
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index 29ba4adf0c53..2fa6b2c33b3f 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -466,6 +466,8 @@ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags);
int of_get_drm_display_mode(struct device_node *np,
struct drm_display_mode *dmode, u32 *bus_flags,
int index);
+int of_get_drm_panel_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode, u32 *bus_flags);
#else
static inline int of_get_drm_display_mode(struct device_node *np,
struct drm_display_mode *dmode,
@@ -473,6 +475,12 @@ static inline int of_get_drm_display_mode(struct device_node *np,
{
return -EINVAL;
}
+
+static inline int of_get_drm_panel_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode, u32 *bus_flags)
+{
+ return -EINVAL;
+}
#endif
void drm_mode_set_name(struct drm_display_mode *mode);
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 4/5] drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-27 12:47 ` Noralf Trønnes
-1 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: sam, maxime, dave.stevenson, david, devicetree, thierry.reding,
Noralf Trønnes
devm_drm_dev_alloc() can't allocate structures that embed a structure
which then again embeds drm_device. Workaround this by adding a
driver_private pointer to struct mipi_dbi_dev which the driver can use for
its additional state.
v3:
- Add documentation
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
include/drm/drm_mipi_dbi.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/drm/drm_mipi_dbi.h b/include/drm/drm_mipi_dbi.h
index 6fe13cce2670..dad2f187b64b 100644
--- a/include/drm/drm_mipi_dbi.h
+++ b/include/drm/drm_mipi_dbi.h
@@ -130,6 +130,14 @@ struct mipi_dbi_dev {
* @dbi: MIPI DBI interface
*/
struct mipi_dbi dbi;
+
+ /**
+ * @driver_private: Driver private data.
+ * Necessary for drivers with private data since devm_drm_dev_alloc()
+ * can't allocate structures that embed a structure which then again
+ * embeds drm_device.
+ */
+ void *driver_private;
};
static inline struct mipi_dbi_dev *drm_to_mipi_dbi_dev(struct drm_device *drm)
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 4/5] drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
@ 2022-02-27 12:47 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: devicetree, Noralf Trønnes, david, dave.stevenson,
thierry.reding, maxime, sam
devm_drm_dev_alloc() can't allocate structures that embed a structure
which then again embeds drm_device. Workaround this by adding a
driver_private pointer to struct mipi_dbi_dev which the driver can use for
its additional state.
v3:
- Add documentation
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
include/drm/drm_mipi_dbi.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/drm/drm_mipi_dbi.h b/include/drm/drm_mipi_dbi.h
index 6fe13cce2670..dad2f187b64b 100644
--- a/include/drm/drm_mipi_dbi.h
+++ b/include/drm/drm_mipi_dbi.h
@@ -130,6 +130,14 @@ struct mipi_dbi_dev {
* @dbi: MIPI DBI interface
*/
struct mipi_dbi dbi;
+
+ /**
+ * @driver_private: Driver private data.
+ * Necessary for drivers with private data since devm_drm_dev_alloc()
+ * can't allocate structures that embed a structure which then again
+ * embeds drm_device.
+ */
+ void *driver_private;
};
static inline struct mipi_dbi_dev *drm_to_mipi_dbi_dev(struct drm_device *drm)
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 5/5] drm/tiny: Add MIPI DBI compatible SPI driver
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-27 12:47 ` Noralf Trønnes
-1 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: sam, maxime, dave.stevenson, david, devicetree, thierry.reding,
Noralf Trønnes
Add a driver that will work with most MIPI DBI compatible SPI panels.
This avoids adding a driver for every new MIPI DBI compatible controller
that is to be used by Linux. The 'compatible' Device Tree property with
a '.bin' suffix will be used to load a firmware file that contains the
controller configuration.
Example (driver will load sainsmart18.bin):
display@0 {
compatible = "sainsmart18", "panel-mipi-dbi-spi";
...
};
v5:
- kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam)
- kconfig: Add select VIDEOMODE_HELPERS (Sam)
- kconfig: Add wiki url in the description (Sam)
- Split out and use of_get_drm_panel_display_mode()(Sam)
- Only use the first compatible to look for a firmware file since the
binding mandates 2 compatibles.
- Make having a firmware file mandatory so we can print an error
message if it's missing to improve the user experience. It's very
unlikely that a controller doesn't need to be initialized and if
it doesn't, it's possible to have a firmware file containing only
a DCS NOP.
v4:
- Move driver to drm/tiny where the other drivers of its kind are located.
The driver module will not be shared with a future DPI driver after all.
v3:
- Move properties to DT (Maxime)
- The MIPI DPI spec has optional support for DPI where the controller is
configured over DBI. Rework the command functions so they can be moved
to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver
v2:
- Drop model property and use compatible instead (Rob)
- Add wiki entry in MAINTAINERS
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
MAINTAINERS | 8 +
drivers/gpu/drm/tiny/Kconfig | 15 +
drivers/gpu/drm/tiny/Makefile | 1 +
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 398 ++++++++++++++++++++++++++
4 files changed, 422 insertions(+)
create mode 100644 drivers/gpu/drm/tiny/panel-mipi-dbi.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 8e6e892f99f0..3a0e57f23ad0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6107,6 +6107,14 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
F: drivers/gpu/drm/tiny/mi0283qt.c
+DRM DRIVER FOR MIPI DBI compatible panels
+M: Noralf Trønnes <noralf@tronnes.org>
+S: Maintained
+W: https://github.com/notro/panel-mipi-dbi/wiki
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
+F: drivers/gpu/drm/tiny/panel-mipi-dbi.c
+
DRM DRIVER FOR MSM ADRENO GPU
M: Rob Clark <robdclark@gmail.com>
M: Sean Paul <sean@poorly.run>
diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
index 712e0004e96e..627d637a1e7e 100644
--- a/drivers/gpu/drm/tiny/Kconfig
+++ b/drivers/gpu/drm/tiny/Kconfig
@@ -51,6 +51,21 @@ config DRM_GM12U320
This is a KMS driver for projectors which use the GM12U320 chipset
for video transfer over USB2/3, such as the Acer C120 mini projector.
+config DRM_PANEL_MIPI_DBI
+ tristate "DRM support for MIPI DBI compatible panels"
+ depends on DRM && SPI
+ select DRM_KMS_HELPER
+ select DRM_GEM_CMA_HELPER
+ select DRM_MIPI_DBI
+ select BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+ help
+ Say Y here if you want to enable support for MIPI DBI compatible
+ panels. The controller command setup can be provided using a
+ firmware file. For more information see
+ https://github.com/notro/panel-mipi-dbi/wiki.
+ To compile this driver as a module, choose M here.
+
config DRM_SIMPLEDRM
tristate "Simple framebuffer driver"
depends on DRM && MMU
diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
index 5d5505d40e7b..1d9d6227e7ab 100644
--- a/drivers/gpu/drm/tiny/Makefile
+++ b/drivers/gpu/drm/tiny/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_ARCPGU) += arcpgu.o
obj-$(CONFIG_DRM_BOCHS) += bochs.o
obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus.o
obj-$(CONFIG_DRM_GM12U320) += gm12u320.o
+obj-$(CONFIG_DRM_PANEL_MIPI_DBI) += panel-mipi-dbi.o
obj-$(CONFIG_DRM_SIMPLEDRM) += simpledrm.o
obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o
obj-$(CONFIG_TINYDRM_ILI9163) += ili9163.o
diff --git a/drivers/gpu/drm/tiny/panel-mipi-dbi.c b/drivers/gpu/drm/tiny/panel-mipi-dbi.c
new file mode 100644
index 000000000000..7f8c6c51387f
--- /dev/null
+++ b/drivers/gpu/drm/tiny/panel-mipi-dbi.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DRM driver for MIPI DBI compatible display panels
+ *
+ * Copyright 2022 Noralf Trønnes
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper.h>
+
+#include <video/mipi_display.h>
+
+static const u8 panel_mipi_dbi_magic[15] = { 'M', 'I', 'P', 'I', ' ', 'D', 'B', 'I',
+ 0, 0, 0, 0, 0, 0, 0 };
+
+/*
+ * The display controller configuration is stored in a firmware file.
+ * The Device Tree 'compatible' property value with a '.bin' suffix is passed
+ * to request_firmware() to fetch this file.
+ */
+struct panel_mipi_dbi_config {
+ /* Magic string: panel_mipi_dbi_magic */
+ u8 magic[15];
+
+ /* Config file format version */
+ u8 file_format_version;
+
+ /*
+ * MIPI commands to execute when the display pipeline is enabled.
+ * This is used to configure the display controller.
+ *
+ * The commands are stored in a byte array with the format:
+ * command, num_parameters, [ parameter, ...], command, ...
+ *
+ * Some commands require a pause before the next command can be received.
+ * Inserting a delay in the command sequence is done by using the NOP command with one
+ * parameter: delay in miliseconds (the No Operation command is part of the MIPI Display
+ * Command Set where it has no parameters).
+ *
+ * Example:
+ * command 0x11
+ * sleep 120ms
+ * command 0xb1 parameters 0x01, 0x2c, 0x2d
+ * command 0x29
+ *
+ * Byte sequence:
+ * 0x11 0x00
+ * 0x00 0x01 0x78
+ * 0xb1 0x03 0x01 0x2c 0x2d
+ * 0x29 0x00
+ */
+ u8 commands[];
+};
+
+struct panel_mipi_dbi_commands {
+ const u8 *buf;
+ size_t len;
+};
+
+static struct panel_mipi_dbi_commands *
+panel_mipi_dbi_check_commands(struct device *dev, const struct firmware *fw)
+{
+ const struct panel_mipi_dbi_config *config = (struct panel_mipi_dbi_config *)fw->data;
+ struct panel_mipi_dbi_commands *commands;
+ size_t size = fw->size, commands_len;
+ unsigned int i = 0;
+
+ if (size < sizeof(*config) + 2) { /* At least 1 command */
+ dev_err(dev, "config: file size=%zu is too small\n", size);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (memcmp(config->magic, panel_mipi_dbi_magic, sizeof(config->magic))) {
+ dev_err(dev, "config: Bad magic: %15ph\n", config->magic);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (config->file_format_version != 1) {
+ dev_err(dev, "config: version=%u is not supported\n", config->file_format_version);
+ return ERR_PTR(-EINVAL);
+ }
+
+ drm_dev_dbg(dev, DRM_UT_DRIVER, "size=%zu version=%u\n", size, config->file_format_version);
+
+ commands_len = size - sizeof(*config);
+
+ while ((i + 1) < commands_len) {
+ u8 command = config->commands[i++];
+ u8 num_parameters = config->commands[i++];
+ const u8 *parameters = &config->commands[i];
+
+ i += num_parameters;
+ if (i > commands_len) {
+ dev_err(dev, "config: command=0x%02x num_parameters=%u overflows\n",
+ command, num_parameters);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (command == 0x00 && num_parameters == 1)
+ drm_dev_dbg(dev, DRM_UT_DRIVER, "sleep %ums\n", parameters[0]);
+ else
+ drm_dev_dbg(dev, DRM_UT_DRIVER, "command %02x %*ph\n",
+ command, num_parameters, parameters);
+ }
+
+ if (i != commands_len) {
+ dev_err(dev, "config: malformed command array\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ commands = devm_kzalloc(dev, sizeof(*commands), GFP_KERNEL);
+ if (!commands)
+ return ERR_PTR(-ENOMEM);
+
+ commands->len = commands_len;
+ commands->buf = devm_kmemdup(dev, config->commands, commands->len, GFP_KERNEL);
+ if (!commands->buf)
+ return ERR_PTR(-ENOMEM);
+
+ return commands;
+}
+
+static struct panel_mipi_dbi_commands *panel_mipi_dbi_commands_from_fw(struct device *dev)
+{
+ struct panel_mipi_dbi_commands *commands;
+ const struct firmware *fw;
+ const char *compatible;
+ char fw_name[40];
+ int ret;
+
+ ret = of_property_read_string_index(dev->of_node, "compatible", 0, &compatible);
+ if (ret)
+ return ERR_PTR(ret);
+
+ snprintf(fw_name, sizeof(fw_name), "%s.bin", compatible);
+ ret = request_firmware(&fw, fw_name, dev);
+ if (ret) {
+ dev_err(dev, "No config file found for compatible '%s' (error=%d)\n",
+ compatible, ret);
+
+ return ERR_PTR(ret);
+ }
+
+ commands = panel_mipi_dbi_check_commands(dev, fw);
+ release_firmware(fw);
+
+ return commands;
+}
+
+static void panel_mipi_dbi_commands_execute(struct mipi_dbi *dbi,
+ struct panel_mipi_dbi_commands *commands)
+{
+ unsigned int i = 0;
+
+ if (!commands)
+ return;
+
+ while (i < commands->len) {
+ u8 command = commands->buf[i++];
+ u8 num_parameters = commands->buf[i++];
+ const u8 *parameters = &commands->buf[i];
+
+ if (command == 0x00 && num_parameters == 1)
+ msleep(parameters[0]);
+ else if (num_parameters)
+ mipi_dbi_command_stackbuf(dbi, command, parameters, num_parameters);
+ else
+ mipi_dbi_command(dbi, command);
+
+ i += num_parameters;
+ }
+}
+
+static void panel_mipi_dbi_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
+{
+ struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+ struct mipi_dbi *dbi = &dbidev->dbi;
+ int ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
+
+ drm_dbg(pipe->crtc.dev, "\n");
+
+ ret = mipi_dbi_poweron_conditional_reset(dbidev);
+ if (ret < 0)
+ goto out_exit;
+ if (!ret)
+ panel_mipi_dbi_commands_execute(dbi, dbidev->driver_private);
+
+ mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
+out_exit:
+ drm_dev_exit(idx);
+}
+
+static const struct drm_simple_display_pipe_funcs panel_mipi_dbi_pipe_funcs = {
+ .enable = panel_mipi_dbi_enable,
+ .disable = mipi_dbi_pipe_disable,
+ .update = mipi_dbi_pipe_update,
+};
+
+DEFINE_DRM_GEM_CMA_FOPS(panel_mipi_dbi_fops);
+
+static const struct drm_driver panel_mipi_dbi_driver = {
+ .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+ .fops = &panel_mipi_dbi_fops,
+ DRM_GEM_CMA_DRIVER_OPS_VMAP,
+ .debugfs_init = mipi_dbi_debugfs_init,
+ .name = "panel-mipi-dbi",
+ .desc = "MIPI DBI compatible display panel",
+ .date = "20220103",
+ .major = 1,
+ .minor = 0,
+};
+
+static int panel_mipi_dbi_get_mode(struct mipi_dbi_dev *dbidev, struct drm_display_mode *mode)
+{
+ struct device *dev = dbidev->drm.dev;
+ u16 hback_porch, vback_porch;
+ int ret;
+
+ ret = of_get_drm_panel_display_mode(dev->of_node, mode, NULL);
+ if (ret) {
+ dev_err(dev, "%pOF: failed to get panel-timing (error=%d)\n", dev->of_node, ret);
+ return ret;
+ }
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+ hback_porch = mode->htotal - mode->hsync_end;
+ vback_porch = mode->vtotal - mode->vsync_end;
+
+ /*
+ * Make sure width and height are set and that only back porch and
+ * pixelclock are set in the other timing values. Also check that
+ * width and height don't exceed the 16-bit value specified by MIPI DCS.
+ */
+ if (!mode->hdisplay || !mode->vdisplay || mode->flags ||
+ mode->hsync_end > mode->hdisplay || (hback_porch + mode->hdisplay) > 0xffff ||
+ mode->vsync_end > mode->vdisplay || (vback_porch + mode->vdisplay) > 0xffff) {
+ dev_err(dev, "%pOF: panel-timing out of bounds\n", dev->of_node);
+ return -EINVAL;
+ }
+
+ /* The driver doesn't use the pixel clock but it is mandatory so fake one if not set */
+ if (!mode->clock)
+ mode->clock = mode->htotal * mode->vtotal * 60 / 1000;
+
+ dbidev->top_offset = vback_porch;
+ dbidev->left_offset = hback_porch;
+
+ return 0;
+}
+
+static int panel_mipi_dbi_spi_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct drm_display_mode mode;
+ struct mipi_dbi_dev *dbidev;
+ struct drm_device *drm;
+ struct mipi_dbi *dbi;
+ struct gpio_desc *dc;
+ int ret;
+
+ dbidev = devm_drm_dev_alloc(dev, &panel_mipi_dbi_driver, struct mipi_dbi_dev, drm);
+ if (IS_ERR(dbidev))
+ return PTR_ERR(dbidev);
+
+ dbi = &dbidev->dbi;
+ drm = &dbidev->drm;
+
+ ret = panel_mipi_dbi_get_mode(dbidev, &mode);
+ if (ret)
+ return ret;
+
+ dbidev->regulator = devm_regulator_get(dev, "power");
+ if (IS_ERR(dbidev->regulator))
+ return dev_err_probe(dev, PTR_ERR(dbidev->regulator),
+ "Failed to get regulator 'power'\n");
+
+ dbidev->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(dbidev->backlight))
+ return dev_err_probe(dev, PTR_ERR(dbidev->backlight), "Failed to get backlight\n");
+
+ dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(dbi->reset))
+ return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
+
+ dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
+ if (IS_ERR(dc))
+ return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
+
+ ret = mipi_dbi_spi_init(spi, dbi, dc);
+ if (ret)
+ return ret;
+
+ if (device_property_present(dev, "write-only"))
+ dbi->read_commands = NULL;
+
+ dbidev->driver_private = panel_mipi_dbi_commands_from_fw(dev);
+ if (IS_ERR(dbidev->driver_private))
+ return PTR_ERR(dbidev->driver_private);
+
+ ret = mipi_dbi_dev_init(dbidev, &panel_mipi_dbi_pipe_funcs, &mode, 0);
+ if (ret)
+ return ret;
+
+ drm_mode_config_reset(drm);
+
+ ret = drm_dev_register(drm, 0);
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, drm);
+
+ drm_fbdev_generic_setup(drm, 0);
+
+ return 0;
+}
+
+static int panel_mipi_dbi_spi_remove(struct spi_device *spi)
+{
+ struct drm_device *drm = spi_get_drvdata(spi);
+
+ drm_dev_unplug(drm);
+ drm_atomic_helper_shutdown(drm);
+
+ return 0;
+}
+
+static void panel_mipi_dbi_spi_shutdown(struct spi_device *spi)
+{
+ drm_atomic_helper_shutdown(spi_get_drvdata(spi));
+}
+
+static int __maybe_unused panel_mipi_dbi_pm_suspend(struct device *dev)
+{
+ return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
+}
+
+static int __maybe_unused panel_mipi_dbi_pm_resume(struct device *dev)
+{
+ drm_mode_config_helper_resume(dev_get_drvdata(dev));
+
+ return 0;
+}
+
+static const struct dev_pm_ops panel_mipi_dbi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(panel_mipi_dbi_pm_suspend, panel_mipi_dbi_pm_resume)
+};
+
+static const struct of_device_id panel_mipi_dbi_spi_of_match[] = {
+ { .compatible = "panel-mipi-dbi-spi" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, panel_mipi_dbi_spi_of_match);
+
+static const struct spi_device_id panel_mipi_dbi_spi_id[] = {
+ { "panel-mipi-dbi-spi", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, panel_mipi_dbi_spi_id);
+
+static struct spi_driver panel_mipi_dbi_spi_driver = {
+ .driver = {
+ .name = "panel-mipi-dbi-spi",
+ .owner = THIS_MODULE,
+ .of_match_table = panel_mipi_dbi_spi_of_match,
+ .pm = &panel_mipi_dbi_pm_ops,
+ },
+ .id_table = panel_mipi_dbi_spi_id,
+ .probe = panel_mipi_dbi_spi_probe,
+ .remove = panel_mipi_dbi_spi_remove,
+ .shutdown = panel_mipi_dbi_spi_shutdown,
+};
+module_spi_driver(panel_mipi_dbi_spi_driver);
+
+MODULE_DESCRIPTION("MIPI DBI compatible display panel driver");
+MODULE_AUTHOR("Noralf Trønnes");
+MODULE_LICENSE("GPL");
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v6 5/5] drm/tiny: Add MIPI DBI compatible SPI driver
@ 2022-02-27 12:47 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-27 12:47 UTC (permalink / raw)
To: robh+dt, dri-devel
Cc: devicetree, Noralf Trønnes, david, dave.stevenson,
thierry.reding, maxime, sam
Add a driver that will work with most MIPI DBI compatible SPI panels.
This avoids adding a driver for every new MIPI DBI compatible controller
that is to be used by Linux. The 'compatible' Device Tree property with
a '.bin' suffix will be used to load a firmware file that contains the
controller configuration.
Example (driver will load sainsmart18.bin):
display@0 {
compatible = "sainsmart18", "panel-mipi-dbi-spi";
...
};
v5:
- kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam)
- kconfig: Add select VIDEOMODE_HELPERS (Sam)
- kconfig: Add wiki url in the description (Sam)
- Split out and use of_get_drm_panel_display_mode()(Sam)
- Only use the first compatible to look for a firmware file since the
binding mandates 2 compatibles.
- Make having a firmware file mandatory so we can print an error
message if it's missing to improve the user experience. It's very
unlikely that a controller doesn't need to be initialized and if
it doesn't, it's possible to have a firmware file containing only
a DCS NOP.
v4:
- Move driver to drm/tiny where the other drivers of its kind are located.
The driver module will not be shared with a future DPI driver after all.
v3:
- Move properties to DT (Maxime)
- The MIPI DPI spec has optional support for DPI where the controller is
configured over DBI. Rework the command functions so they can be moved
to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver
v2:
- Drop model property and use compatible instead (Rob)
- Add wiki entry in MAINTAINERS
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
MAINTAINERS | 8 +
drivers/gpu/drm/tiny/Kconfig | 15 +
drivers/gpu/drm/tiny/Makefile | 1 +
drivers/gpu/drm/tiny/panel-mipi-dbi.c | 398 ++++++++++++++++++++++++++
4 files changed, 422 insertions(+)
create mode 100644 drivers/gpu/drm/tiny/panel-mipi-dbi.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 8e6e892f99f0..3a0e57f23ad0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6107,6 +6107,14 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
F: drivers/gpu/drm/tiny/mi0283qt.c
+DRM DRIVER FOR MIPI DBI compatible panels
+M: Noralf Trønnes <noralf@tronnes.org>
+S: Maintained
+W: https://github.com/notro/panel-mipi-dbi/wiki
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
+F: drivers/gpu/drm/tiny/panel-mipi-dbi.c
+
DRM DRIVER FOR MSM ADRENO GPU
M: Rob Clark <robdclark@gmail.com>
M: Sean Paul <sean@poorly.run>
diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
index 712e0004e96e..627d637a1e7e 100644
--- a/drivers/gpu/drm/tiny/Kconfig
+++ b/drivers/gpu/drm/tiny/Kconfig
@@ -51,6 +51,21 @@ config DRM_GM12U320
This is a KMS driver for projectors which use the GM12U320 chipset
for video transfer over USB2/3, such as the Acer C120 mini projector.
+config DRM_PANEL_MIPI_DBI
+ tristate "DRM support for MIPI DBI compatible panels"
+ depends on DRM && SPI
+ select DRM_KMS_HELPER
+ select DRM_GEM_CMA_HELPER
+ select DRM_MIPI_DBI
+ select BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+ help
+ Say Y here if you want to enable support for MIPI DBI compatible
+ panels. The controller command setup can be provided using a
+ firmware file. For more information see
+ https://github.com/notro/panel-mipi-dbi/wiki.
+ To compile this driver as a module, choose M here.
+
config DRM_SIMPLEDRM
tristate "Simple framebuffer driver"
depends on DRM && MMU
diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
index 5d5505d40e7b..1d9d6227e7ab 100644
--- a/drivers/gpu/drm/tiny/Makefile
+++ b/drivers/gpu/drm/tiny/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_ARCPGU) += arcpgu.o
obj-$(CONFIG_DRM_BOCHS) += bochs.o
obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus.o
obj-$(CONFIG_DRM_GM12U320) += gm12u320.o
+obj-$(CONFIG_DRM_PANEL_MIPI_DBI) += panel-mipi-dbi.o
obj-$(CONFIG_DRM_SIMPLEDRM) += simpledrm.o
obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o
obj-$(CONFIG_TINYDRM_ILI9163) += ili9163.o
diff --git a/drivers/gpu/drm/tiny/panel-mipi-dbi.c b/drivers/gpu/drm/tiny/panel-mipi-dbi.c
new file mode 100644
index 000000000000..7f8c6c51387f
--- /dev/null
+++ b/drivers/gpu/drm/tiny/panel-mipi-dbi.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DRM driver for MIPI DBI compatible display panels
+ *
+ * Copyright 2022 Noralf Trønnes
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_modeset_helper.h>
+
+#include <video/mipi_display.h>
+
+static const u8 panel_mipi_dbi_magic[15] = { 'M', 'I', 'P', 'I', ' ', 'D', 'B', 'I',
+ 0, 0, 0, 0, 0, 0, 0 };
+
+/*
+ * The display controller configuration is stored in a firmware file.
+ * The Device Tree 'compatible' property value with a '.bin' suffix is passed
+ * to request_firmware() to fetch this file.
+ */
+struct panel_mipi_dbi_config {
+ /* Magic string: panel_mipi_dbi_magic */
+ u8 magic[15];
+
+ /* Config file format version */
+ u8 file_format_version;
+
+ /*
+ * MIPI commands to execute when the display pipeline is enabled.
+ * This is used to configure the display controller.
+ *
+ * The commands are stored in a byte array with the format:
+ * command, num_parameters, [ parameter, ...], command, ...
+ *
+ * Some commands require a pause before the next command can be received.
+ * Inserting a delay in the command sequence is done by using the NOP command with one
+ * parameter: delay in miliseconds (the No Operation command is part of the MIPI Display
+ * Command Set where it has no parameters).
+ *
+ * Example:
+ * command 0x11
+ * sleep 120ms
+ * command 0xb1 parameters 0x01, 0x2c, 0x2d
+ * command 0x29
+ *
+ * Byte sequence:
+ * 0x11 0x00
+ * 0x00 0x01 0x78
+ * 0xb1 0x03 0x01 0x2c 0x2d
+ * 0x29 0x00
+ */
+ u8 commands[];
+};
+
+struct panel_mipi_dbi_commands {
+ const u8 *buf;
+ size_t len;
+};
+
+static struct panel_mipi_dbi_commands *
+panel_mipi_dbi_check_commands(struct device *dev, const struct firmware *fw)
+{
+ const struct panel_mipi_dbi_config *config = (struct panel_mipi_dbi_config *)fw->data;
+ struct panel_mipi_dbi_commands *commands;
+ size_t size = fw->size, commands_len;
+ unsigned int i = 0;
+
+ if (size < sizeof(*config) + 2) { /* At least 1 command */
+ dev_err(dev, "config: file size=%zu is too small\n", size);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (memcmp(config->magic, panel_mipi_dbi_magic, sizeof(config->magic))) {
+ dev_err(dev, "config: Bad magic: %15ph\n", config->magic);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (config->file_format_version != 1) {
+ dev_err(dev, "config: version=%u is not supported\n", config->file_format_version);
+ return ERR_PTR(-EINVAL);
+ }
+
+ drm_dev_dbg(dev, DRM_UT_DRIVER, "size=%zu version=%u\n", size, config->file_format_version);
+
+ commands_len = size - sizeof(*config);
+
+ while ((i + 1) < commands_len) {
+ u8 command = config->commands[i++];
+ u8 num_parameters = config->commands[i++];
+ const u8 *parameters = &config->commands[i];
+
+ i += num_parameters;
+ if (i > commands_len) {
+ dev_err(dev, "config: command=0x%02x num_parameters=%u overflows\n",
+ command, num_parameters);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (command == 0x00 && num_parameters == 1)
+ drm_dev_dbg(dev, DRM_UT_DRIVER, "sleep %ums\n", parameters[0]);
+ else
+ drm_dev_dbg(dev, DRM_UT_DRIVER, "command %02x %*ph\n",
+ command, num_parameters, parameters);
+ }
+
+ if (i != commands_len) {
+ dev_err(dev, "config: malformed command array\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ commands = devm_kzalloc(dev, sizeof(*commands), GFP_KERNEL);
+ if (!commands)
+ return ERR_PTR(-ENOMEM);
+
+ commands->len = commands_len;
+ commands->buf = devm_kmemdup(dev, config->commands, commands->len, GFP_KERNEL);
+ if (!commands->buf)
+ return ERR_PTR(-ENOMEM);
+
+ return commands;
+}
+
+static struct panel_mipi_dbi_commands *panel_mipi_dbi_commands_from_fw(struct device *dev)
+{
+ struct panel_mipi_dbi_commands *commands;
+ const struct firmware *fw;
+ const char *compatible;
+ char fw_name[40];
+ int ret;
+
+ ret = of_property_read_string_index(dev->of_node, "compatible", 0, &compatible);
+ if (ret)
+ return ERR_PTR(ret);
+
+ snprintf(fw_name, sizeof(fw_name), "%s.bin", compatible);
+ ret = request_firmware(&fw, fw_name, dev);
+ if (ret) {
+ dev_err(dev, "No config file found for compatible '%s' (error=%d)\n",
+ compatible, ret);
+
+ return ERR_PTR(ret);
+ }
+
+ commands = panel_mipi_dbi_check_commands(dev, fw);
+ release_firmware(fw);
+
+ return commands;
+}
+
+static void panel_mipi_dbi_commands_execute(struct mipi_dbi *dbi,
+ struct panel_mipi_dbi_commands *commands)
+{
+ unsigned int i = 0;
+
+ if (!commands)
+ return;
+
+ while (i < commands->len) {
+ u8 command = commands->buf[i++];
+ u8 num_parameters = commands->buf[i++];
+ const u8 *parameters = &commands->buf[i];
+
+ if (command == 0x00 && num_parameters == 1)
+ msleep(parameters[0]);
+ else if (num_parameters)
+ mipi_dbi_command_stackbuf(dbi, command, parameters, num_parameters);
+ else
+ mipi_dbi_command(dbi, command);
+
+ i += num_parameters;
+ }
+}
+
+static void panel_mipi_dbi_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
+{
+ struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+ struct mipi_dbi *dbi = &dbidev->dbi;
+ int ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
+
+ drm_dbg(pipe->crtc.dev, "\n");
+
+ ret = mipi_dbi_poweron_conditional_reset(dbidev);
+ if (ret < 0)
+ goto out_exit;
+ if (!ret)
+ panel_mipi_dbi_commands_execute(dbi, dbidev->driver_private);
+
+ mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
+out_exit:
+ drm_dev_exit(idx);
+}
+
+static const struct drm_simple_display_pipe_funcs panel_mipi_dbi_pipe_funcs = {
+ .enable = panel_mipi_dbi_enable,
+ .disable = mipi_dbi_pipe_disable,
+ .update = mipi_dbi_pipe_update,
+};
+
+DEFINE_DRM_GEM_CMA_FOPS(panel_mipi_dbi_fops);
+
+static const struct drm_driver panel_mipi_dbi_driver = {
+ .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+ .fops = &panel_mipi_dbi_fops,
+ DRM_GEM_CMA_DRIVER_OPS_VMAP,
+ .debugfs_init = mipi_dbi_debugfs_init,
+ .name = "panel-mipi-dbi",
+ .desc = "MIPI DBI compatible display panel",
+ .date = "20220103",
+ .major = 1,
+ .minor = 0,
+};
+
+static int panel_mipi_dbi_get_mode(struct mipi_dbi_dev *dbidev, struct drm_display_mode *mode)
+{
+ struct device *dev = dbidev->drm.dev;
+ u16 hback_porch, vback_porch;
+ int ret;
+
+ ret = of_get_drm_panel_display_mode(dev->of_node, mode, NULL);
+ if (ret) {
+ dev_err(dev, "%pOF: failed to get panel-timing (error=%d)\n", dev->of_node, ret);
+ return ret;
+ }
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+ hback_porch = mode->htotal - mode->hsync_end;
+ vback_porch = mode->vtotal - mode->vsync_end;
+
+ /*
+ * Make sure width and height are set and that only back porch and
+ * pixelclock are set in the other timing values. Also check that
+ * width and height don't exceed the 16-bit value specified by MIPI DCS.
+ */
+ if (!mode->hdisplay || !mode->vdisplay || mode->flags ||
+ mode->hsync_end > mode->hdisplay || (hback_porch + mode->hdisplay) > 0xffff ||
+ mode->vsync_end > mode->vdisplay || (vback_porch + mode->vdisplay) > 0xffff) {
+ dev_err(dev, "%pOF: panel-timing out of bounds\n", dev->of_node);
+ return -EINVAL;
+ }
+
+ /* The driver doesn't use the pixel clock but it is mandatory so fake one if not set */
+ if (!mode->clock)
+ mode->clock = mode->htotal * mode->vtotal * 60 / 1000;
+
+ dbidev->top_offset = vback_porch;
+ dbidev->left_offset = hback_porch;
+
+ return 0;
+}
+
+static int panel_mipi_dbi_spi_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct drm_display_mode mode;
+ struct mipi_dbi_dev *dbidev;
+ struct drm_device *drm;
+ struct mipi_dbi *dbi;
+ struct gpio_desc *dc;
+ int ret;
+
+ dbidev = devm_drm_dev_alloc(dev, &panel_mipi_dbi_driver, struct mipi_dbi_dev, drm);
+ if (IS_ERR(dbidev))
+ return PTR_ERR(dbidev);
+
+ dbi = &dbidev->dbi;
+ drm = &dbidev->drm;
+
+ ret = panel_mipi_dbi_get_mode(dbidev, &mode);
+ if (ret)
+ return ret;
+
+ dbidev->regulator = devm_regulator_get(dev, "power");
+ if (IS_ERR(dbidev->regulator))
+ return dev_err_probe(dev, PTR_ERR(dbidev->regulator),
+ "Failed to get regulator 'power'\n");
+
+ dbidev->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(dbidev->backlight))
+ return dev_err_probe(dev, PTR_ERR(dbidev->backlight), "Failed to get backlight\n");
+
+ dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(dbi->reset))
+ return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
+
+ dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
+ if (IS_ERR(dc))
+ return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
+
+ ret = mipi_dbi_spi_init(spi, dbi, dc);
+ if (ret)
+ return ret;
+
+ if (device_property_present(dev, "write-only"))
+ dbi->read_commands = NULL;
+
+ dbidev->driver_private = panel_mipi_dbi_commands_from_fw(dev);
+ if (IS_ERR(dbidev->driver_private))
+ return PTR_ERR(dbidev->driver_private);
+
+ ret = mipi_dbi_dev_init(dbidev, &panel_mipi_dbi_pipe_funcs, &mode, 0);
+ if (ret)
+ return ret;
+
+ drm_mode_config_reset(drm);
+
+ ret = drm_dev_register(drm, 0);
+ if (ret)
+ return ret;
+
+ spi_set_drvdata(spi, drm);
+
+ drm_fbdev_generic_setup(drm, 0);
+
+ return 0;
+}
+
+static int panel_mipi_dbi_spi_remove(struct spi_device *spi)
+{
+ struct drm_device *drm = spi_get_drvdata(spi);
+
+ drm_dev_unplug(drm);
+ drm_atomic_helper_shutdown(drm);
+
+ return 0;
+}
+
+static void panel_mipi_dbi_spi_shutdown(struct spi_device *spi)
+{
+ drm_atomic_helper_shutdown(spi_get_drvdata(spi));
+}
+
+static int __maybe_unused panel_mipi_dbi_pm_suspend(struct device *dev)
+{
+ return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
+}
+
+static int __maybe_unused panel_mipi_dbi_pm_resume(struct device *dev)
+{
+ drm_mode_config_helper_resume(dev_get_drvdata(dev));
+
+ return 0;
+}
+
+static const struct dev_pm_ops panel_mipi_dbi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(panel_mipi_dbi_pm_suspend, panel_mipi_dbi_pm_resume)
+};
+
+static const struct of_device_id panel_mipi_dbi_spi_of_match[] = {
+ { .compatible = "panel-mipi-dbi-spi" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, panel_mipi_dbi_spi_of_match);
+
+static const struct spi_device_id panel_mipi_dbi_spi_id[] = {
+ { "panel-mipi-dbi-spi", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, panel_mipi_dbi_spi_id);
+
+static struct spi_driver panel_mipi_dbi_spi_driver = {
+ .driver = {
+ .name = "panel-mipi-dbi-spi",
+ .owner = THIS_MODULE,
+ .of_match_table = panel_mipi_dbi_spi_of_match,
+ .pm = &panel_mipi_dbi_pm_ops,
+ },
+ .id_table = panel_mipi_dbi_spi_id,
+ .probe = panel_mipi_dbi_spi_probe,
+ .remove = panel_mipi_dbi_spi_remove,
+ .shutdown = panel_mipi_dbi_spi_shutdown,
+};
+module_spi_driver(panel_mipi_dbi_spi_driver);
+
+MODULE_DESCRIPTION("MIPI DBI compatible display panel driver");
+MODULE_AUTHOR("Noralf Trønnes");
+MODULE_LICENSE("GPL");
--
2.33.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 1/5] dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-28 8:22 ` Maxime Ripard
-1 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: Maxime Ripard, thierry.reding, devicetree, dave.stevenson,
Rob Herring, david, sam
On Sun, 27 Feb 2022 13:47:09 +0100, Noralf Trønnes wrote:
> Add binding for MIPI DBI compatible SPI panels.
>
> v6:
> - Fix indentation (Rob)
>
> v5:
> - Add sainsmart18 to compatible items (Rob)
> - Expand write-only description (Sam)
>
> [...]
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 1/5] dt-bindings: display: add bindings for MIPI DBI compatible SPI panels
@ 2022-02-28 8:22 ` Maxime Ripard
0 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: david, devicetree, dave.stevenson, thierry.reding, Maxime Ripard, sam
On Sun, 27 Feb 2022 13:47:09 +0100, Noralf Trønnes wrote:
> Add binding for MIPI DBI compatible SPI panels.
>
> v6:
> - Fix indentation (Rob)
>
> v5:
> - Add sainsmart18 to compatible items (Rob)
> - Expand write-only description (Sam)
>
> [...]
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 2/5] drm/modes: Remove trailing whitespace
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-28 8:22 ` Maxime Ripard
-1 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: Maxime Ripard, thierry.reding, devicetree, dave.stevenson, david, sam
On Sun, 27 Feb 2022 13:47:10 +0100, Noralf Trønnes wrote:
> Remove trailing whitespace from a comment.
>
>
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 2/5] drm/modes: Remove trailing whitespace
@ 2022-02-28 8:22 ` Maxime Ripard
0 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: devicetree, david, dave.stevenson, thierry.reding, Maxime Ripard, sam
On Sun, 27 Feb 2022 13:47:10 +0100, Noralf Trønnes wrote:
> Remove trailing whitespace from a comment.
>
>
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 3/5] drm/modes: Add of_get_drm_panel_display_mode()
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-28 8:22 ` Maxime Ripard
-1 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: Maxime Ripard, thierry.reding, devicetree, dave.stevenson, david, sam
On Sun, 27 Feb 2022 13:47:11 +0100, Noralf Trønnes wrote:
> Add a function to get a drm_display_mode from a panel-timing
> device tree subnode.
>
>
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 3/5] drm/modes: Add of_get_drm_panel_display_mode()
@ 2022-02-28 8:22 ` Maxime Ripard
0 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: devicetree, david, dave.stevenson, thierry.reding, Maxime Ripard, sam
On Sun, 27 Feb 2022 13:47:11 +0100, Noralf Trønnes wrote:
> Add a function to get a drm_display_mode from a panel-timing
> device tree subnode.
>
>
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 4/5] drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-28 8:22 ` Maxime Ripard
-1 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: Maxime Ripard, thierry.reding, devicetree, dave.stevenson, david, sam
On Sun, 27 Feb 2022 13:47:12 +0100, Noralf Trønnes wrote:
> devm_drm_dev_alloc() can't allocate structures that embed a structure
> which then again embeds drm_device. Workaround this by adding a
> driver_private pointer to struct mipi_dbi_dev which the driver can use for
> its additional state.
>
> v3:
> - Add documentation
>
> [...]
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 4/5] drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev
@ 2022-02-28 8:22 ` Maxime Ripard
0 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: devicetree, david, dave.stevenson, thierry.reding, Maxime Ripard, sam
On Sun, 27 Feb 2022 13:47:12 +0100, Noralf Trønnes wrote:
> devm_drm_dev_alloc() can't allocate structures that embed a structure
> which then again embeds drm_device. Workaround this by adding a
> driver_private pointer to struct mipi_dbi_dev which the driver can use for
> its additional state.
>
> v3:
> - Add documentation
>
> [...]
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 5/5] drm/tiny: Add MIPI DBI compatible SPI driver
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-28 8:22 ` Maxime Ripard
-1 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: Maxime Ripard, thierry.reding, devicetree, dave.stevenson, david, sam
On Sun, 27 Feb 2022 13:47:13 +0100, Noralf Trønnes wrote:
> Add a driver that will work with most MIPI DBI compatible SPI panels.
> This avoids adding a driver for every new MIPI DBI compatible controller
> that is to be used by Linux. The 'compatible' Device Tree property with
> a '.bin' suffix will be used to load a firmware file that contains the
> controller configuration.
>
> Example (driver will load sainsmart18.bin):
>
> [...]
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: (subset) [PATCH v6 5/5] drm/tiny: Add MIPI DBI compatible SPI driver
@ 2022-02-28 8:22 ` Maxime Ripard
0 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:22 UTC (permalink / raw)
To: Noralf Trønnes, robh+dt, dri-devel
Cc: devicetree, david, dave.stevenson, thierry.reding, Maxime Ripard, sam
On Sun, 27 Feb 2022 13:47:13 +0100, Noralf Trønnes wrote:
> Add a driver that will work with most MIPI DBI compatible SPI panels.
> This avoids adding a driver for every new MIPI DBI compatible controller
> that is to be used by Linux. The 'compatible' Device Tree property with
> a '.bin' suffix will be used to load a firmware file that contains the
> controller configuration.
>
> Example (driver will load sainsmart18.bin):
>
> [...]
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/5] drm/tiny: Add MIPI DBI compatible SPI driver
2022-02-27 12:47 ` Noralf Trønnes
@ 2022-02-28 8:31 ` Maxime Ripard
-1 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:31 UTC (permalink / raw)
To: Noralf Trønnes
Cc: robh+dt, dri-devel, sam, dave.stevenson, david, devicetree,
thierry.reding
[-- Attachment #1: Type: text/plain, Size: 557 bytes --]
Hi,
On Sun, Feb 27, 2022 at 01:47:08PM +0100, Noralf Trønnes wrote:
> Hi,
>
> This patchset adds a driver that will work with most MIPI DBI compatible
> SPI panels out there.
>
> One change this time: Fix indentation in the DT binding.
>
> All patches are reviewed now so I will apply this after Rob's bot have
> looked at the binding.
>
> Thanks for reviewing!
I just merged it in drm-misc-next.
Thanks a lot for being persistent enough to get through this, it will
massively improve the situation for those displays :)
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/5] drm/tiny: Add MIPI DBI compatible SPI driver
@ 2022-02-28 8:31 ` Maxime Ripard
0 siblings, 0 replies; 26+ messages in thread
From: Maxime Ripard @ 2022-02-28 8:31 UTC (permalink / raw)
To: Noralf Trønnes
Cc: devicetree, david, dave.stevenson, dri-devel, robh+dt,
thierry.reding, sam
[-- Attachment #1: Type: text/plain, Size: 557 bytes --]
Hi,
On Sun, Feb 27, 2022 at 01:47:08PM +0100, Noralf Trønnes wrote:
> Hi,
>
> This patchset adds a driver that will work with most MIPI DBI compatible
> SPI panels out there.
>
> One change this time: Fix indentation in the DT binding.
>
> All patches are reviewed now so I will apply this after Rob's bot have
> looked at the binding.
>
> Thanks for reviewing!
I just merged it in drm-misc-next.
Thanks a lot for being persistent enough to get through this, it will
massively improve the situation for those displays :)
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/5] drm/tiny: Add MIPI DBI compatible SPI driver
2022-02-28 8:31 ` Maxime Ripard
@ 2022-02-28 11:50 ` Noralf Trønnes
-1 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-28 11:50 UTC (permalink / raw)
To: Maxime Ripard
Cc: robh+dt, dri-devel, sam, dave.stevenson, david, devicetree,
thierry.reding
Den 28.02.2022 09.31, skrev Maxime Ripard:
> Hi,
>
> On Sun, Feb 27, 2022 at 01:47:08PM +0100, Noralf Trønnes wrote:
>> Hi,
>>
>> This patchset adds a driver that will work with most MIPI DBI compatible
>> SPI panels out there.
>>
>> One change this time: Fix indentation in the DT binding.
>>
>> All patches are reviewed now so I will apply this after Rob's bot have
>> looked at the binding.
>>
>> Thanks for reviewing!
>
> I just merged it in drm-misc-next.
>
Thanks.
> Thanks a lot for being persistent enough to get through this, it will
> massively improve the situation for those displays :)
>
Some times it's good not knowing how long it will take to do a project,
I wouldn't have done it if I knew, but then again I'm now glad there's a
future proof solution for this :) I did it for the maker community which
continues to facinate me with its ingenuity and energy.
Thanks Maxime for the idea that made it possible to do a generic driver
in mainline!
Noralf.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v6 0/5] drm/tiny: Add MIPI DBI compatible SPI driver
@ 2022-02-28 11:50 ` Noralf Trønnes
0 siblings, 0 replies; 26+ messages in thread
From: Noralf Trønnes @ 2022-02-28 11:50 UTC (permalink / raw)
To: Maxime Ripard
Cc: devicetree, david, dave.stevenson, dri-devel, robh+dt,
thierry.reding, sam
Den 28.02.2022 09.31, skrev Maxime Ripard:
> Hi,
>
> On Sun, Feb 27, 2022 at 01:47:08PM +0100, Noralf Trønnes wrote:
>> Hi,
>>
>> This patchset adds a driver that will work with most MIPI DBI compatible
>> SPI panels out there.
>>
>> One change this time: Fix indentation in the DT binding.
>>
>> All patches are reviewed now so I will apply this after Rob's bot have
>> looked at the binding.
>>
>> Thanks for reviewing!
>
> I just merged it in drm-misc-next.
>
Thanks.
> Thanks a lot for being persistent enough to get through this, it will
> massively improve the situation for those displays :)
>
Some times it's good not knowing how long it will take to do a project,
I wouldn't have done it if I knew, but then again I'm now glad there's a
future proof solution for this :) I did it for the maker community which
continues to facinate me with its ingenuity and energy.
Thanks Maxime for the idea that made it possible to do a generic driver
in mainline!
Noralf.
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2022-02-28 11:50 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-27 12:47 [PATCH v6 0/5] drm/tiny: Add MIPI DBI compatible SPI driver Noralf Trønnes
2022-02-27 12:47 ` Noralf Trønnes
2022-02-27 12:47 ` [PATCH v6 1/5] dt-bindings: display: add bindings for MIPI DBI compatible SPI panels Noralf Trønnes
2022-02-27 12:47 ` Noralf Trønnes
2022-02-28 8:22 ` (subset) " Maxime Ripard
2022-02-28 8:22 ` Maxime Ripard
2022-02-27 12:47 ` [PATCH v6 2/5] drm/modes: Remove trailing whitespace Noralf Trønnes
2022-02-27 12:47 ` Noralf Trønnes
2022-02-28 8:22 ` (subset) " Maxime Ripard
2022-02-28 8:22 ` Maxime Ripard
2022-02-27 12:47 ` [PATCH v6 3/5] drm/modes: Add of_get_drm_panel_display_mode() Noralf Trønnes
2022-02-27 12:47 ` Noralf Trønnes
2022-02-28 8:22 ` (subset) " Maxime Ripard
2022-02-28 8:22 ` Maxime Ripard
2022-02-27 12:47 ` [PATCH v6 4/5] drm/mipi-dbi: Add driver_private member to struct mipi_dbi_dev Noralf Trønnes
2022-02-27 12:47 ` Noralf Trønnes
2022-02-28 8:22 ` (subset) " Maxime Ripard
2022-02-28 8:22 ` Maxime Ripard
2022-02-27 12:47 ` [PATCH v6 5/5] drm/tiny: Add MIPI DBI compatible SPI driver Noralf Trønnes
2022-02-27 12:47 ` Noralf Trønnes
2022-02-28 8:22 ` (subset) " Maxime Ripard
2022-02-28 8:22 ` Maxime Ripard
2022-02-28 8:31 ` [PATCH v6 0/5] " Maxime Ripard
2022-02-28 8:31 ` Maxime Ripard
2022-02-28 11:50 ` Noralf Trønnes
2022-02-28 11:50 ` Noralf Trønnes
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.