* [PATCH 5.4 01/53] cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 02/53] clk: jz4725b: fix mmc0 clock gating Greg Kroah-Hartman
` (58 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhao Gongyi, Zhang Qiao, Waiman Long,
Michal Koutný,
Tejun Heo
From: Zhang Qiao <zhangqiao22@huawei.com>
commit 05c7b7a92cc87ff8d7fde189d0fade250697573c upstream.
As previously discussed(https://lkml.org/lkml/2022/1/20/51),
cpuset_attach() is affected with similar cpu hotplug race,
as follow scenario:
cpuset_attach() cpu hotplug
--------------------------- ----------------------
down_write(cpuset_rwsem)
guarantee_online_cpus() // (load cpus_attach)
sched_cpu_deactivate
set_cpu_active()
// will change cpu_active_mask
set_cpus_allowed_ptr(cpus_attach)
__set_cpus_allowed_ptr_locked()
// (if the intersection of cpus_attach and
cpu_active_mask is empty, will return -EINVAL)
up_write(cpuset_rwsem)
To avoid races such as described above, protect cpuset_attach() call
with cpu_hotplug_lock.
Fixes: be367d099270 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time")
Cc: stable@vger.kernel.org # v2.6.32+
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/cgroup/cpuset.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -2204,6 +2204,7 @@ static void cpuset_attach(struct cgroup_
cgroup_taskset_first(tset, &css);
cs = css_cs(css);
+ cpus_read_lock();
percpu_down_write(&cpuset_rwsem);
/* prepare for attach */
@@ -2259,6 +2260,7 @@ static void cpuset_attach(struct cgroup_
wake_up(&cpuset_attach_wq);
percpu_up_write(&cpuset_rwsem);
+ cpus_read_unlock();
}
/* The various types of files and directories in a cpuset file system */
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 02/53] clk: jz4725b: fix mmc0 clock gating
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.4 01/53] cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 03/53] vhost/vsock: dont check owner in vhost_vsock_stop() while releasing Greg Kroah-Hartman
` (57 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Siarhei Volkau, Paul Cercueil, Stephen Boyd
From: Siarhei Volkau <lis8215@gmail.com>
commit 2f0754f27a230fee6e6d753f07585cee03bedfe3 upstream.
The mmc0 clock gate bit was mistakenly assigned to "i2s" clock.
You can find that the same bit is assigned to "mmc0" too.
It leads to mmc0 hang for a long time after any sound activity
also it prevented PM_SLEEP to work properly.
I guess it was introduced by copy-paste from jz4740 driver
where it is really controls I2S clock gate.
Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver")
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clk/ingenic/jz4725b-cgu.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -135,11 +135,10 @@ static const struct ingenic_cgu_clk_info
},
[JZ4725B_CLK_I2S] = {
- "i2s", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ "i2s", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4725B_CLK_EXT, JZ4725B_CLK_PLL_HALF, -1, -1 },
.mux = { CGU_REG_CPCCR, 31, 1 },
.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
- .gate = { CGU_REG_CLKGR, 6 },
},
[JZ4725B_CLK_SPI] = {
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 03/53] vhost/vsock: dont check owner in vhost_vsock_stop() while releasing
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.4 01/53] cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 02/53] clk: jz4725b: fix mmc0 clock gating Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 04/53] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel Greg Kroah-Hartman
` (56 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+1e3ea63db39f2b4440e0,
Stefano Garzarella, Jason Wang, David S. Miller,
syzbot+3140b17cb44a7b174008
From: Stefano Garzarella <sgarzare@redhat.com>
commit a58da53ffd70294ebea8ecd0eb45fd0d74add9f9 upstream.
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device
ownership. It expects current->mm to be valid.
vhost_vsock_stop() is also called by vhost_vsock_dev_release() when
the user has not done close(), so when we are in do_exit(). In this
case current->mm is invalid and we're releasing the device, so we
should clean it anyway.
Let's check the owner only when vhost_vsock_stop() is called
by an ioctl.
When invoked from release we can not fail so we don't check return
code of vhost_vsock_stop(). We need to stop vsock even if it's not
the owner.
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vhost/vsock.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -570,16 +570,18 @@ err:
return ret;
}
-static int vhost_vsock_stop(struct vhost_vsock *vsock)
+static int vhost_vsock_stop(struct vhost_vsock *vsock, bool check_owner)
{
size_t i;
- int ret;
+ int ret = 0;
mutex_lock(&vsock->dev.mutex);
- ret = vhost_dev_check_owner(&vsock->dev);
- if (ret)
- goto err;
+ if (check_owner) {
+ ret = vhost_dev_check_owner(&vsock->dev);
+ if (ret)
+ goto err;
+ }
for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) {
struct vhost_virtqueue *vq = &vsock->vqs[i];
@@ -694,7 +696,12 @@ static int vhost_vsock_dev_release(struc
* inefficient. Room for improvement here. */
vsock_for_each_connected_socket(vhost_vsock_reset_orphans);
- vhost_vsock_stop(vsock);
+ /* Don't check the owner, because we are in the release path, so we
+ * need to stop the vsock device in any case.
+ * vhost_vsock_stop() can not fail in this case, so we don't need to
+ * check the return code.
+ */
+ vhost_vsock_stop(vsock, false);
vhost_vsock_flush(vsock);
vhost_dev_stop(&vsock->dev);
@@ -792,7 +799,7 @@ static long vhost_vsock_dev_ioctl(struct
if (start)
return vhost_vsock_start(vsock);
else
- return vhost_vsock_stop(vsock);
+ return vhost_vsock_stop(vsock, true);
case VHOST_GET_FEATURES:
features = VHOST_VSOCK_FEATURES;
if (copy_to_user(argp, &features, sizeof(features)))
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 04/53] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 03/53] vhost/vsock: dont check owner in vhost_vsock_stop() while releasing Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 05/53] parisc/unaligned: Fix ldw() and stw() unalignment handlers Greg Kroah-Hartman
` (55 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Helge Deller
From: Helge Deller <deller@gmx.de>
commit dd2288f4a020d693360e3e8d72f8b9d9c25f5ef6 upstream.
Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/kernel/unaligned.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -397,7 +397,7 @@ static int emulate_std(struct pt_regs *r
__asm__ __volatile__ (
" mtsp %4, %%sr1\n"
" zdep %2, 29, 2, %%r19\n"
-" dep %%r0, 31, 2, %2\n"
+" dep %%r0, 31, 2, %3\n"
" mtsar %%r19\n"
" zvdepi -2, 32, %%r19\n"
"1: ldw 0(%%sr1,%3),%%r20\n"
@@ -409,7 +409,7 @@ static int emulate_std(struct pt_regs *r
" andcm %%r21, %%r19, %%r21\n"
" or %1, %%r20, %1\n"
" or %2, %%r21, %2\n"
-"3: stw %1,0(%%sr1,%1)\n"
+"3: stw %1,0(%%sr1,%3)\n"
"4: stw %%r1,4(%%sr1,%3)\n"
"5: stw %2,8(%%sr1,%3)\n"
" copy %%r0, %0\n"
@@ -596,7 +596,6 @@ void handle_unaligned(struct pt_regs *re
ret = ERR_NOTHANDLED; /* "undefined", but lets kill them. */
break;
}
-#ifdef CONFIG_PA20
switch (regs->iir & OPCODE2_MASK)
{
case OPCODE_FLDD_L:
@@ -607,14 +606,15 @@ void handle_unaligned(struct pt_regs *re
flop=1;
ret = emulate_std(regs, R2(regs->iir),1);
break;
+#ifdef CONFIG_PA20
case OPCODE_LDD_L:
ret = emulate_ldd(regs, R2(regs->iir),0);
break;
case OPCODE_STD_L:
ret = emulate_std(regs, R2(regs->iir),0);
break;
- }
#endif
+ }
switch (regs->iir & OPCODE3_MASK)
{
case OPCODE_FLDW_L:
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 05/53] parisc/unaligned: Fix ldw() and stw() unalignment handlers
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 04/53] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 06/53] drm/amdgpu: disable MMHUB PG for Picasso Greg Kroah-Hartman
` (54 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Helge Deller
From: Helge Deller <deller@gmx.de>
commit a97279836867b1cb50a3d4f0b1bf60e0abe6d46c upstream.
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/kernel/unaligned.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -340,7 +340,7 @@ static int emulate_stw(struct pt_regs *r
: "r" (val), "r" (regs->ior), "r" (regs->isr)
: "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER );
- return 0;
+ return ret;
}
static int emulate_std(struct pt_regs *regs, int frreg, int flop)
{
@@ -619,10 +619,10 @@ void handle_unaligned(struct pt_regs *re
{
case OPCODE_FLDW_L:
flop=1;
- ret = emulate_ldw(regs, R2(regs->iir),0);
+ ret = emulate_ldw(regs, R2(regs->iir), 1);
break;
case OPCODE_LDW_M:
- ret = emulate_ldw(regs, R2(regs->iir),1);
+ ret = emulate_ldw(regs, R2(regs->iir), 0);
break;
case OPCODE_FSTW_L:
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 06/53] drm/amdgpu: disable MMHUB PG for Picasso
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 05/53] parisc/unaligned: Fix ldw() and stw() unalignment handlers Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 07/53] sr9700: sanity check for packet length Greg Kroah-Hartman
` (53 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Evan Quan, Alex Deucher
From: Evan Quan <evan.quan@amd.com>
commit f626dd0ff05043e5a7154770cc7cda66acee33a3 upstream.
MMHUB PG needs to be disabled for Picasso for stability reasons.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/soc15.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -1143,8 +1143,11 @@ static int soc15_common_early_init(void
AMD_CG_SUPPORT_SDMA_MGCG |
AMD_CG_SUPPORT_SDMA_LS;
+ /*
+ * MMHUB PG needs to be disabled for Picasso for
+ * stability reasons.
+ */
adev->pg_flags = AMD_PG_SUPPORT_SDMA |
- AMD_PG_SUPPORT_MMHUB |
AMD_PG_SUPPORT_VCN;
} else {
adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG |
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 07/53] sr9700: sanity check for packet length
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 06/53] drm/amdgpu: disable MMHUB PG for Picasso Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 08/53] USB: zaurus: support another broken Zaurus Greg Kroah-Hartman
` (52 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Grant Grundler,
David S. Miller
From: Oliver Neukum <oneukum@suse.com>
commit e9da0b56fe27206b49f39805f7dcda8a89379062 upstream.
A malicious device can leak heap data to user space
providing bogus frame lengths. Introduce a sanity check.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/sr9700.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/usb/sr9700.c
+++ b/drivers/net/usb/sr9700.c
@@ -410,7 +410,7 @@ static int sr9700_rx_fixup(struct usbnet
/* ignore the CRC length */
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
- if (len > ETH_FRAME_LEN)
+ if (len > ETH_FRAME_LEN || len > skb->len)
return 0;
/* the last packet of current skb */
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 08/53] USB: zaurus: support another broken Zaurus
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 07/53] sr9700: sanity check for packet length Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 09/53] netfilter: nf_tables_offload: incorrect flow offload action array size Greg Kroah-Hartman
` (51 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Ross Maynard, David S. Miller
From: Oliver Neukum <oneukum@suse.com>
commit 6605cc67ca18b9d583eb96e18a20f5f4e726103c upstream.
This SL-6000 says Direct Line, not Ethernet
v2: added Reporter and Link
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Ross Maynard <bids.7405@bigpond.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/cdc_ether.c | 12 ++++++++++++
drivers/net/usb/zaurus.c | 12 ++++++++++++
2 files changed, 24 insertions(+)
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -571,6 +571,11 @@ static const struct usb_device_id produc
.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
.bInterfaceProtocol = USB_CDC_PROTO_NONE
+#define ZAURUS_FAKE_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
* wire-incompatible with true CDC Ethernet implementations.
* (And, it seems, needlessly so...)
@@ -626,6 +631,13 @@ static const struct usb_device_id produc
.driver_info = 0,
}, {
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_FAKE_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
| USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = 0x04DD,
/* reported with some C860 units */
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -256,6 +256,11 @@ static const struct usb_device_id produc
.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
.bInterfaceProtocol = USB_CDC_PROTO_NONE
+#define ZAURUS_FAKE_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
{
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
@@ -315,6 +320,13 @@ static const struct usb_device_id produc
.driver_info = ZAURUS_PXA_INFO,
}, {
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_FAKE_INTERFACE,
+ .driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
| USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = 0x04DD,
/* reported with some C860 units */
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 09/53] netfilter: nf_tables_offload: incorrect flow offload action array size
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 08/53] USB: zaurus: support another broken Zaurus Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 10/53] x86/fpu: Correct pkru/xstate inconsistency Greg Kroah-Hartman
` (50 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso, Nick Gregory
From: Pablo Neira Ayuso <pablo@netfilter.org>
commit b1a5983f56e371046dcf164f90bfaf704d2b89f6 upstream.
immediate verdict expression needs to allocate one slot in the flow offload
action array, however, immediate data expression does not need to do so.
fwd and dup expression need to allocate one slot, this is missing.
Add a new offload_action interface to report if this expression needs to
allocate one slot in the flow offload action array.
Fixes: be2861dc36d7 ("netfilter: nft_{fwd,dup}_netdev: add offload support")
Reported-and-tested-by: Nick Gregory <Nick.Gregory@Sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/netfilter/nf_tables.h | 2 +-
include/net/netfilter/nf_tables_offload.h | 2 --
net/netfilter/nf_tables_offload.c | 3 ++-
net/netfilter/nft_dup_netdev.c | 6 ++++++
net/netfilter/nft_fwd_netdev.c | 6 ++++++
net/netfilter/nft_immediate.c | 12 +++++++++++-
6 files changed, 26 insertions(+), 5 deletions(-)
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -805,7 +805,7 @@ struct nft_expr_ops {
int (*offload)(struct nft_offload_ctx *ctx,
struct nft_flow_rule *flow,
const struct nft_expr *expr);
- u32 offload_flags;
+ bool (*offload_action)(const struct nft_expr *expr);
const struct nft_expr_type *type;
void *data;
};
--- a/include/net/netfilter/nf_tables_offload.h
+++ b/include/net/netfilter/nf_tables_offload.h
@@ -60,8 +60,6 @@ struct nft_flow_rule {
struct flow_rule *rule;
};
-#define NFT_OFFLOAD_F_ACTION (1 << 0)
-
void nft_flow_rule_set_addr_type(struct nft_flow_rule *flow,
enum flow_dissector_key_id addr_type);
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -55,7 +55,8 @@ struct nft_flow_rule *nft_flow_rule_crea
expr = nft_expr_first(rule);
while (nft_expr_more(rule, expr)) {
- if (expr->ops->offload_flags & NFT_OFFLOAD_F_ACTION)
+ if (expr->ops->offload_action &&
+ expr->ops->offload_action(expr))
num_actions++;
expr = nft_expr_next(expr);
--- a/net/netfilter/nft_dup_netdev.c
+++ b/net/netfilter/nft_dup_netdev.c
@@ -67,6 +67,11 @@ static int nft_dup_netdev_offload(struct
return nft_fwd_dup_netdev_offload(ctx, flow, FLOW_ACTION_MIRRED, oif);
}
+static bool nft_dup_netdev_offload_action(const struct nft_expr *expr)
+{
+ return true;
+}
+
static struct nft_expr_type nft_dup_netdev_type;
static const struct nft_expr_ops nft_dup_netdev_ops = {
.type = &nft_dup_netdev_type,
@@ -75,6 +80,7 @@ static const struct nft_expr_ops nft_dup
.init = nft_dup_netdev_init,
.dump = nft_dup_netdev_dump,
.offload = nft_dup_netdev_offload,
+ .offload_action = nft_dup_netdev_offload_action,
};
static struct nft_expr_type nft_dup_netdev_type __read_mostly = {
--- a/net/netfilter/nft_fwd_netdev.c
+++ b/net/netfilter/nft_fwd_netdev.c
@@ -77,6 +77,11 @@ static int nft_fwd_netdev_offload(struct
return nft_fwd_dup_netdev_offload(ctx, flow, FLOW_ACTION_REDIRECT, oif);
}
+static bool nft_fwd_netdev_offload_action(const struct nft_expr *expr)
+{
+ return true;
+}
+
struct nft_fwd_neigh {
enum nft_registers sreg_dev:8;
enum nft_registers sreg_addr:8;
@@ -219,6 +224,7 @@ static const struct nft_expr_ops nft_fwd
.dump = nft_fwd_netdev_dump,
.validate = nft_fwd_validate,
.offload = nft_fwd_netdev_offload,
+ .offload_action = nft_fwd_netdev_offload_action,
};
static const struct nft_expr_ops *
--- a/net/netfilter/nft_immediate.c
+++ b/net/netfilter/nft_immediate.c
@@ -163,6 +163,16 @@ static int nft_immediate_offload(struct
return 0;
}
+static bool nft_immediate_offload_action(const struct nft_expr *expr)
+{
+ const struct nft_immediate_expr *priv = nft_expr_priv(expr);
+
+ if (priv->dreg == NFT_REG_VERDICT)
+ return true;
+
+ return false;
+}
+
static const struct nft_expr_ops nft_imm_ops = {
.type = &nft_imm_type,
.size = NFT_EXPR_SIZE(sizeof(struct nft_immediate_expr)),
@@ -173,7 +183,7 @@ static const struct nft_expr_ops nft_imm
.dump = nft_immediate_dump,
.validate = nft_immediate_validate,
.offload = nft_immediate_offload,
- .offload_flags = NFT_OFFLOAD_F_ACTION,
+ .offload_action = nft_immediate_offload_action,
};
struct nft_expr_type nft_imm_type __read_mostly = {
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 10/53] x86/fpu: Correct pkru/xstate inconsistency
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 09/53] netfilter: nf_tables_offload: incorrect flow offload action array size Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 11/53] tee: export teedev_open() and teedev_close_context() Greg Kroah-Hartman
` (49 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Geffon, Willis Kung, Dave Hansen
From: Brian Geffon <bgeffon@google.com>
When eagerly switching PKRU in switch_fpu_finish() it checks that
current is not a kernel thread as kernel threads will never use PKRU.
It's possible that this_cpu_read_stable() on current_task
(ie. get_current()) is returning an old cached value. To resolve this
reference next_p directly rather than relying on current.
As written it's possible when switching from a kernel thread to a
userspace thread to observe a cached PF_KTHREAD flag and never restore
the PKRU. And as a result this issue only occurs when switching
from a kernel thread to a userspace thread, switching from a non kernel
thread works perfectly fine because all that is considered in that
situation are the flags from some other non kernel task and the next fpu
is passed in to switch_fpu_finish().
This behavior only exists between 5.2 and 5.13 when it was fixed by a
rewrite decoupling PKRU from xstate, in:
commit 954436989cc5 ("x86/fpu: Remove PKRU handling from switch_fpu_finish()")
Unfortunately backporting the fix from 5.13 is probably not realistic as
it's part of a 60+ patch series which rewrites most of the PKRU handling.
Fixes: 0cecca9d03c9 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Willis Kung <williskung@google.com>
Tested-by: Willis Kung <williskung@google.com>
Cc: <stable@vger.kernel.org> # v5.4.x
Cc: <stable@vger.kernel.org> # v5.10.x
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/fpu/internal.h | 13 ++++++++-----
arch/x86/kernel/process_32.c | 6 ++----
arch/x86/kernel/process_64.c | 6 ++----
3 files changed, 12 insertions(+), 13 deletions(-)
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -560,9 +560,11 @@ static inline void __fpregs_load_activat
* The FPU context is only stored/restored for a user task and
* PF_KTHREAD is used to distinguish between kernel and user threads.
*/
-static inline void switch_fpu_prepare(struct fpu *old_fpu, int cpu)
+static inline void switch_fpu_prepare(struct task_struct *prev, int cpu)
{
- if (static_cpu_has(X86_FEATURE_FPU) && !(current->flags & PF_KTHREAD)) {
+ struct fpu *old_fpu = &prev->thread.fpu;
+
+ if (static_cpu_has(X86_FEATURE_FPU) && !(prev->flags & PF_KTHREAD)) {
if (!copy_fpregs_to_fpstate(old_fpu))
old_fpu->last_cpu = -1;
else
@@ -581,10 +583,11 @@ static inline void switch_fpu_prepare(st
* Load PKRU from the FPU context if available. Delay loading of the
* complete FPU state until the return to userland.
*/
-static inline void switch_fpu_finish(struct fpu *new_fpu)
+static inline void switch_fpu_finish(struct task_struct *next)
{
u32 pkru_val = init_pkru_value;
struct pkru_state *pk;
+ struct fpu *next_fpu = &next->thread.fpu;
if (!static_cpu_has(X86_FEATURE_FPU))
return;
@@ -598,7 +601,7 @@ static inline void switch_fpu_finish(str
* PKRU state is switched eagerly because it needs to be valid before we
* return to userland e.g. for a copy_to_user() operation.
*/
- if (!(current->flags & PF_KTHREAD)) {
+ if (!(next->flags & PF_KTHREAD)) {
/*
* If the PKRU bit in xsave.header.xfeatures is not set,
* then the PKRU component was in init state, which means
@@ -607,7 +610,7 @@ static inline void switch_fpu_finish(str
* in memory is not valid. This means pkru_val has to be
* set to 0 and not to init_pkru_value.
*/
- pk = get_xsave_addr(&new_fpu->state.xsave, XFEATURE_PKRU);
+ pk = get_xsave_addr(&next_fpu->state.xsave, XFEATURE_PKRU);
pkru_val = pk ? pk->pkru : 0;
}
__write_pkru(pkru_val);
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -229,14 +229,12 @@ __switch_to(struct task_struct *prev_p,
{
struct thread_struct *prev = &prev_p->thread,
*next = &next_p->thread;
- struct fpu *prev_fpu = &prev->fpu;
- struct fpu *next_fpu = &next->fpu;
int cpu = smp_processor_id();
/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
if (!test_thread_flag(TIF_NEED_FPU_LOAD))
- switch_fpu_prepare(prev_fpu, cpu);
+ switch_fpu_prepare(prev_p, cpu);
/*
* Save away %gs. No need to save %fs, as it was saved on the
@@ -292,7 +290,7 @@ __switch_to(struct task_struct *prev_p,
this_cpu_write(current_task, next_p);
- switch_fpu_finish(next_fpu);
+ switch_fpu_finish(next_p);
/* Load the Intel cache allocation PQR MSR. */
resctrl_sched_in();
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -505,15 +505,13 @@ __switch_to(struct task_struct *prev_p,
{
struct thread_struct *prev = &prev_p->thread;
struct thread_struct *next = &next_p->thread;
- struct fpu *prev_fpu = &prev->fpu;
- struct fpu *next_fpu = &next->fpu;
int cpu = smp_processor_id();
WARN_ON_ONCE(IS_ENABLED(CONFIG_DEBUG_ENTRY) &&
this_cpu_read(irq_count) != -1);
if (!test_thread_flag(TIF_NEED_FPU_LOAD))
- switch_fpu_prepare(prev_fpu, cpu);
+ switch_fpu_prepare(prev_p, cpu);
/* We must save %fs and %gs before load_TLS() because
* %fs and %gs may be cleared by load_TLS().
@@ -565,7 +563,7 @@ __switch_to(struct task_struct *prev_p,
this_cpu_write(current_task, next_p);
this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
- switch_fpu_finish(next_fpu);
+ switch_fpu_finish(next_p);
/* Reload sp0. */
update_task_stack(next_p);
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 11/53] tee: export teedev_open() and teedev_close_context()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 10/53] x86/fpu: Correct pkru/xstate inconsistency Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 12/53] optee: use driver internal tee_context for some rpc Greg Kroah-Hartman
` (48 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sumit Garg, Jens Wiklander
From: Jens Wiklander <jens.wiklander@linaro.org>
commit 1e2c3ef0496e72ba9001da5fd1b7ed56ccb30597 upstream.
Exports the two functions teedev_open() and teedev_close_context() in
order to make it easier to create a driver internal struct tee_context.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tee/tee_core.c | 6 ++++--
include/linux/tee_drv.h | 14 ++++++++++++++
2 files changed, 18 insertions(+), 2 deletions(-)
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -28,7 +28,7 @@ static DEFINE_SPINLOCK(driver_lock);
static struct class *tee_class;
static dev_t tee_devt;
-static struct tee_context *teedev_open(struct tee_device *teedev)
+struct tee_context *teedev_open(struct tee_device *teedev)
{
int rc;
struct tee_context *ctx;
@@ -56,6 +56,7 @@ err:
return ERR_PTR(rc);
}
+EXPORT_SYMBOL_GPL(teedev_open);
void teedev_ctx_get(struct tee_context *ctx)
{
@@ -82,13 +83,14 @@ void teedev_ctx_put(struct tee_context *
kref_put(&ctx->refcount, teedev_ctx_release);
}
-static void teedev_close_context(struct tee_context *ctx)
+void teedev_close_context(struct tee_context *ctx)
{
struct tee_device *teedev = ctx->teedev;
teedev_ctx_put(ctx);
tee_device_put(teedev);
}
+EXPORT_SYMBOL_GPL(teedev_close_context);
static int tee_open(struct inode *inode, struct file *filp)
{
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -579,4 +579,18 @@ struct tee_client_driver {
#define to_tee_client_driver(d) \
container_of(d, struct tee_client_driver, driver)
+/**
+ * teedev_open() - Open a struct tee_device
+ * @teedev: Device to open
+ *
+ * @return a pointer to struct tee_context on success or an ERR_PTR on failure.
+ */
+struct tee_context *teedev_open(struct tee_device *teedev);
+
+/**
+ * teedev_close_context() - closes a struct tee_context
+ * @ctx: The struct tee_context to close
+ */
+void teedev_close_context(struct tee_context *ctx);
+
#endif /*__TEE_DRV_H*/
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 12/53] optee: use driver internal tee_context for some rpc
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 11/53] tee: export teedev_open() and teedev_close_context() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 13/53] lan743x: fix deadlock in lan743x_phy_link_status_change() Greg Kroah-Hartman
` (47 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars Persson, Sumit Garg, Jens Wiklander
From: Jens Wiklander <jens.wiklander@linaro.org>
commit aceeafefff736057e8f93f19bbfbef26abd94604 upstream.
Adds a driver private tee_context by moving the tee_context in struct
optee_notif to struct optee. This tee_context was previously used when
doing internal calls to secure world to deliver notification.
The new driver internal tee_context is now also when allocating driver
private shared memory. This decouples the shared memory object from its
original tee_context. This is needed when the life time of such a memory
allocation outlives the client tee_context.
This patch fixes the problem described below:
The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out
of memory failure seen during kexec reboot") introduced a kernel shutdown
regression that can be triggered after running the OP-TEE xtest suites.
Once the shutdown hook is called it is not possible to communicate any more
with the supplicant process because the system is not scheduling task any
longer. Thus if the optee driver shutdown path receives a supplicant RPC
request from the OP-TEE we will deadlock the kernel's shutdown.
Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot")
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reported-by: Lars Persson <larper@axis.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
[JW: backport to 5.4-stable + update commit message]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tee/optee/core.c | 8 ++++++++
drivers/tee/optee/optee_private.h | 2 ++
drivers/tee/optee/rpc.c | 8 +++++---
3 files changed, 15 insertions(+), 3 deletions(-)
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -552,6 +552,7 @@ static struct optee *optee_probe(struct
struct optee *optee = NULL;
void *memremaped_shm = NULL;
struct tee_device *teedev;
+ struct tee_context *ctx;
u32 sec_caps;
int rc;
@@ -631,6 +632,12 @@ static struct optee *optee_probe(struct
optee_supp_init(&optee->supp);
optee->memremaped_shm = memremaped_shm;
optee->pool = pool;
+ ctx = teedev_open(optee->teedev);
+ if (IS_ERR(ctx)) {
+ rc = PTR_ERR(ctx);
+ goto err;
+ }
+ optee->ctx = ctx;
/*
* Ensure that there are no pre-existing shm objects before enabling
@@ -667,6 +674,7 @@ err:
static void optee_remove(struct optee *optee)
{
+ teedev_close_context(optee->ctx);
/*
* Ask OP-TEE to free all cached shared memory objects to decrease
* reference counters and also avoid wild pointers in secure world
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -69,6 +69,7 @@ struct optee_supp {
* struct optee - main service struct
* @supp_teedev: supplicant device
* @teedev: client device
+ * @ctx: driver internal TEE context
* @invoke_fn: function to issue smc or hvc
* @call_queue: queue of threads waiting to call @invoke_fn
* @wait_queue: queue of threads from secure world waiting for a
@@ -83,6 +84,7 @@ struct optee {
struct tee_device *supp_teedev;
struct tee_device *teedev;
optee_invoke_fn *invoke_fn;
+ struct tee_context *ctx;
struct optee_call_queue call_queue;
struct optee_wait_queue wait_queue;
struct optee_supp supp;
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -191,6 +191,7 @@ static struct tee_shm *cmd_alloc_suppl(s
}
static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+ struct optee *optee,
struct optee_msg_arg *arg,
struct optee_call_ctx *call_ctx)
{
@@ -220,7 +221,8 @@ static void handle_rpc_func_cmd_shm_allo
shm = cmd_alloc_suppl(ctx, sz);
break;
case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
- shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED | TEE_SHM_PRIV);
+ shm = tee_shm_alloc(optee->ctx, sz,
+ TEE_SHM_MAPPED | TEE_SHM_PRIV);
break;
default:
arg->ret = TEEC_ERROR_BAD_PARAMETERS;
@@ -377,7 +379,7 @@ static void handle_rpc_func_cmd(struct t
break;
case OPTEE_MSG_RPC_CMD_SHM_ALLOC:
free_pages_list(call_ctx);
- handle_rpc_func_cmd_shm_alloc(ctx, arg, call_ctx);
+ handle_rpc_func_cmd_shm_alloc(ctx, optee, arg, call_ctx);
break;
case OPTEE_MSG_RPC_CMD_SHM_FREE:
handle_rpc_func_cmd_shm_free(ctx, arg);
@@ -405,7 +407,7 @@ void optee_handle_rpc(struct tee_context
switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
case OPTEE_SMC_RPC_FUNC_ALLOC:
- shm = tee_shm_alloc(ctx, param->a1,
+ shm = tee_shm_alloc(optee->ctx, param->a1,
TEE_SHM_MAPPED | TEE_SHM_PRIV);
if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
reg_pair_from_64(¶m->a1, ¶m->a2, pa);
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 13/53] lan743x: fix deadlock in lan743x_phy_link_status_change()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 12/53] optee: use driver internal tee_context for some rpc Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 14/53] ping: remove pr_err from ping_lookup Greg Kroah-Hartman
` (46 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alessandro B Maurici,
Heiner Kallweit, Andrew Lunn, Jakub Kicinski, dann frazier
From: Heiner Kallweit <hkallweit1@gmail.com>
commit ddb826c2c92d461f290a7bab89e7c28696191875 upstream.
Usage of phy_ethtool_get_link_ksettings() in the link status change
handler isn't needed, and in combination with the referenced change
it results in a deadlock. Simply remove the call and replace it with
direct access to phydev->speed. The duplex argument of
lan743x_phy_update_flowcontrol() isn't used and can be removed.
Fixes: c10a485c3de5 ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency")
Reported-by: Alessandro B Maurici <abmaurici@gmail.com>
Tested-by: Alessandro B Maurici <abmaurici@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[dannf: adjust context]
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
---
drivers/net/ethernet/microchip/lan743x_main.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -916,8 +916,7 @@ static int lan743x_phy_reset(struct lan7
}
static void lan743x_phy_update_flowcontrol(struct lan743x_adapter *adapter,
- u8 duplex, u16 local_adv,
- u16 remote_adv)
+ u16 local_adv, u16 remote_adv)
{
struct lan743x_phy *phy = &adapter->phy;
u8 cap;
@@ -944,22 +943,17 @@ static void lan743x_phy_link_status_chan
phy_print_status(phydev);
if (phydev->state == PHY_RUNNING) {
- struct ethtool_link_ksettings ksettings;
int remote_advertisement = 0;
int local_advertisement = 0;
- memset(&ksettings, 0, sizeof(ksettings));
- phy_ethtool_get_link_ksettings(netdev, &ksettings);
local_advertisement =
linkmode_adv_to_mii_adv_t(phydev->advertising);
remote_advertisement =
linkmode_adv_to_mii_adv_t(phydev->lp_advertising);
- lan743x_phy_update_flowcontrol(adapter,
- ksettings.base.duplex,
- local_advertisement,
+ lan743x_phy_update_flowcontrol(adapter, local_advertisement,
remote_advertisement);
- lan743x_ptp_update_latency(adapter, ksettings.base.speed);
+ lan743x_ptp_update_latency(adapter, phydev->speed);
}
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 14/53] ping: remove pr_err from ping_lookup
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 13/53] lan743x: fix deadlock in lan743x_phy_link_status_change() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 15/53] perf data: Fix double free in perf_session__delete() Greg Kroah-Hartman
` (45 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jakub Kicinski, Xin Long
From: Xin Long <lucien.xin@gmail.com>
commit cd33bdcbead882c2e58fdb4a54a7bd75b610a452 upstream.
As Jakub noticed, prints should be avoided on the datapath.
Also, as packets would never come to the else branch in
ping_lookup(), remove pr_err() from ping_lookup().
Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/ping.c | 1 -
1 file changed, 1 deletion(-)
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -187,7 +187,6 @@ static struct sock *ping_lookup(struct n
(int)ident, &ipv6_hdr(skb)->daddr, dif);
#endif
} else {
- pr_err("ping: protocol(%x) is not supported\n", ntohs(skb->protocol));
return NULL;
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 15/53] perf data: Fix double free in perf_session__delete()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 14/53] ping: remove pr_err from ping_lookup Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 16/53] bpf: Do not try bpf_msg_push_data with len 0 Greg Kroah-Hartman
` (44 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexey Bayduraev, Jiri Olsa,
Adrian Hunter, Alexander Antonov, Alexander Shishkin,
Alexei Budankov, Andi Kleen, Ingo Molnar, Namhyung Kim,
Peter Zijlstra, Arnaldo Carvalho de Melo
From: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
commit 69560e366fc4d5fca7bebb0e44edbfafc8bcaf05 upstream.
When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.
This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().
Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/data.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/tools/perf/util/data.c
+++ b/tools/perf/util/data.c
@@ -44,10 +44,6 @@ int perf_data__create_dir(struct perf_da
if (!files)
return -ENOMEM;
- data->dir.version = PERF_DIR_VERSION;
- data->dir.files = files;
- data->dir.nr = nr;
-
for (i = 0; i < nr; i++) {
struct perf_data_file *file = &files[i];
@@ -62,6 +58,9 @@ int perf_data__create_dir(struct perf_da
file->fd = ret;
}
+ data->dir.version = PERF_DIR_VERSION;
+ data->dir.files = files;
+ data->dir.nr = nr;
return 0;
out_err:
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 16/53] bpf: Do not try bpf_msg_push_data with len 0
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 15/53] perf data: Fix double free in perf_session__delete() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 17/53] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends Greg Kroah-Hartman
` (43 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felix Maurer, Daniel Borkmann,
Yonghong Song, John Fastabend
From: Felix Maurer <fmaurer@redhat.com>
commit 4a11678f683814df82fca9018d964771e02d7e6d upstream.
If bpf_msg_push_data() is called with len 0 (as it happens during
selftests/bpf/test_sockmap), we do not need to do anything and can
return early.
Calling bpf_msg_push_data() with len 0 previously lead to a wrong ENOMEM
error: we later called get_order(copy + len); if len was 0, copy + len
was also often 0 and get_order() returned some undefined value (at the
moment 52). alloc_pages() caught that and failed, but then bpf_msg_push_data()
returned ENOMEM. This was wrong because we are most probably not out of
memory and actually do not need any additional memory.
Fixes: 6fff607e2f14b ("bpf: sk_msg program helper bpf_msg_push_data")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/df69012695c7094ccb1943ca02b4920db3537466.1644421921.git.fmaurer@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/filter.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2516,6 +2516,9 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_m
if (unlikely(flags))
return -EINVAL;
+ if (unlikely(len == 0))
+ return 0;
+
/* First find the starting scatterlist element */
i = msg->sg.start;
do {
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 17/53] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 16/53] bpf: Do not try bpf_msg_push_data with len 0 Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 18/53] tipc: Fix end of loop tests for list_for_each_entry() Greg Kroah-Hartman
` (42 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Jakub Kicinski
From: Eric Dumazet <edumazet@google.com>
commit ef527f968ae05c6717c39f49c8709a7e2c19183a upstream.
Whenever one of these functions pull all data from an skb in a frag_list,
use consume_skb() instead of kfree_skb() to avoid polluting drop
monitoring.
Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220220154052.1308469-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/skbuff.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2139,7 +2139,7 @@ void *__pskb_pull_tail(struct sk_buff *s
/* Free pulled out fragments. */
while ((list = skb_shinfo(skb)->frag_list) != insp) {
skb_shinfo(skb)->frag_list = list->next;
- kfree_skb(list);
+ consume_skb(list);
}
/* And insert new clone at head. */
if (clone) {
@@ -5846,7 +5846,7 @@ static int pskb_carve_frag_list(struct s
/* Free pulled out fragments. */
while ((list = shinfo->frag_list) != insp) {
shinfo->frag_list = list->next;
- kfree_skb(list);
+ consume_skb(list);
}
/* And insert new clone at head. */
if (clone) {
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 18/53] tipc: Fix end of loop tests for list_for_each_entry()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 17/53] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 19/53] gso: do not skip outer ip header in case of ipip and net_failover Greg Kroah-Hartman
` (41 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, David S. Miller
From: Dan Carpenter <dan.carpenter@oracle.com>
commit a1f8fec4dac8bc7b172b2bdbd881e015261a6322 upstream.
These tests are supposed to check if the loop exited via a break or not.
However the tests are wrong because if we did not exit via a break then
"p" is not a valid pointer. In that case, it's the equivalent of
"if (*(u32 *)sr == *last_key) {". That's going to work most of the time,
but there is a potential for those to be equal.
Fixes: 1593123a6a49 ("tipc: add name table dump to new netlink api")
Fixes: 1a1a143daf84 ("tipc: add publication dump to new netlink api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/name_table.c | 2 +-
net/tipc/socket.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/tipc/name_table.c
+++ b/net/tipc/name_table.c
@@ -812,7 +812,7 @@ static int __tipc_nl_add_nametable_publ(
list_for_each_entry(p, &sr->all_publ, all_publ)
if (p->key == *last_key)
break;
- if (p->key != *last_key)
+ if (list_entry_is_head(p, &sr->all_publ, all_publ))
return -EPIPE;
} else {
p = list_first_entry(&sr->all_publ,
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -3590,7 +3590,7 @@ static int __tipc_nl_list_sk_publ(struct
if (p->key == *last_publ)
break;
}
- if (p->key != *last_publ) {
+ if (list_entry_is_head(p, &tsk->publications, binding_sock)) {
/* We never set seq or call nl_dump_check_consistent()
* this means that setting prev_seq here will cause the
* consistence check to fail in the netlink callback
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 19/53] gso: do not skip outer ip header in case of ipip and net_failover
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 18/53] tipc: Fix end of loop tests for list_for_each_entry() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 20/53] openvswitch: Fix setting ipv6 fields causing hw csum failure Greg Kroah-Hartman
` (40 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tao Liu, Willem de Bruijn, David S. Miller
From: Tao Liu <thomas.liu@ucloud.cn>
commit cc20cced0598d9a5ff91ae4ab147b3b5e99ee819 upstream.
We encounter a tcp drop issue in our cloud environment. Packet GROed in
host forwards to a VM virtio_net nic with net_failover enabled. VM acts
as a IPVS LB with ipip encapsulation. The full path like:
host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat
-> ipip encap -> net_failover tx -> virtio_net tx
When net_failover transmits a ipip pkt (gso_type = 0x0103, which means
SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso
did because it supports TSO and GSO_IPXIP4. But network_header points to
inner ip header.
Call Trace:
tcp4_gso_segment ------> return NULL
inet_gso_segment ------> inner iph, network_header points to
ipip_gso_segment
inet_gso_segment ------> outer iph
skb_mac_gso_segment
Afterwards virtio_net transmits the pkt, only inner ip header is modified.
And the outer one just keeps unchanged. The pkt will be dropped in remote
host.
Call Trace:
inet_gso_segment ------> inner iph, outer iph is skipped
skb_mac_gso_segment
__skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
__qdisc_run
__dev_queue_xmit ------> virtio_net
dev_hard_start_xmit
__dev_queue_xmit ------> net_failover
ip_finish_output2
ip_output
iptunnel_xmit
ip_tunnel_xmit
ipip_tunnel_xmit ------> ipip
dev_hard_start_xmit
__dev_queue_xmit
ip_finish_output2
ip_output
ip_forward
ip_rcv
__netif_receive_skb_one_core
netif_receive_skb_internal
napi_gro_receive
receive_buf
virtnet_poll
net_rx_action
The root cause of this issue is specific with the rare combination of
SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option.
SKB_GSO_DODGY is set from external virtio_net. We need to reset network
header when callbacks.gso_segment() returns NULL.
This patch also includes ipv6_gso_segment(), considering SIT, etc.
Fixes: cb32f511a70b ("ipip: add GSO/TSO support")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/af_inet.c | 5 ++++-
net/ipv6/ip6_offload.c | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1344,8 +1344,11 @@ struct sk_buff *inet_gso_segment(struct
}
ops = rcu_dereference(inet_offloads[proto]);
- if (likely(ops && ops->callbacks.gso_segment))
+ if (likely(ops && ops->callbacks.gso_segment)) {
segs = ops->callbacks.gso_segment(skb, features);
+ if (!segs)
+ skb->network_header = skb_mac_header(skb) + nhoff - skb->head;
+ }
if (IS_ERR_OR_NULL(segs))
goto out;
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -111,6 +111,8 @@ static struct sk_buff *ipv6_gso_segment(
if (likely(ops && ops->callbacks.gso_segment)) {
skb_reset_transport_header(skb);
segs = ops->callbacks.gso_segment(skb, features);
+ if (!segs)
+ skb->network_header = skb_mac_header(skb) + nhoff - skb->head;
}
if (IS_ERR_OR_NULL(segs))
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 20/53] openvswitch: Fix setting ipv6 fields causing hw csum failure
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 19/53] gso: do not skip outer ip header in case of ipip and net_failover Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 21/53] drm/edid: Always set RGB444 Greg Kroah-Hartman
` (39 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Blakey, Jakub Kicinski
From: Paul Blakey <paulb@nvidia.com>
commit d9b5ae5c1b241b91480aa30408be12fe91af834a upstream.
Ipv6 ttl, label and tos fields are modified without first
pulling/pushing the ipv6 header, which would have updated
the hw csum (if available). This might cause csum validation
when sending the packet to the stack, as can be seen in
the trace below.
Fix this by updating skb->csum if available.
Trace resulted by ipv6 ttl dec and then sending packet
to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]:
[295241.900063] s_pf0vf2: hw csum failure
[295241.923191] Call Trace:
[295241.925728] <IRQ>
[295241.927836] dump_stack+0x5c/0x80
[295241.931240] __skb_checksum_complete+0xac/0xc0
[295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack]
[295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack]
[295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch]
[295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch]
[295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch]
[295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch]
[295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch]
[295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch]
[295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch]
[295242.034074] __netif_receive_skb_core+0x2ca/0xcb0
[295242.047498] netif_receive_skb_internal+0x3e/0xc0
[295242.052291] napi_gro_receive+0xba/0xe0
[295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core]
[295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core]
[295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core]
[295242.077958] net_rx_action+0x149/0x3b0
[295242.086762] __do_softirq+0xd7/0x2d6
[295242.090427] irq_exit+0xf7/0x100
[295242.093748] do_IRQ+0x7f/0xd0
[295242.096806] common_interrupt+0xf/0xf
[295242.100559] </IRQ>
[295242.102750] RIP: 0033:0x7f9022e88cbd
[295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
[295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000
[295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30
[295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340
[295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000
[295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40
Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/checksum.h | 5 +++++
net/openvswitch/actions.c | 46 ++++++++++++++++++++++++++++++++++++++--------
2 files changed, 43 insertions(+), 8 deletions(-)
--- a/include/net/checksum.h
+++ b/include/net/checksum.h
@@ -139,6 +139,11 @@ static inline void csum_replace2(__sum16
*sum = ~csum16_add(csum16_sub(~(*sum), old), new);
}
+static inline void csum_replace(__wsum *csum, __wsum old, __wsum new)
+{
+ *csum = csum_add(csum_sub(*csum, old), new);
+}
+
struct sk_buff;
void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
__be32 from, __be32 to, bool pseudohdr);
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -427,12 +427,43 @@ static void set_ipv6_addr(struct sk_buff
memcpy(addr, new_addr, sizeof(__be32[4]));
}
-static void set_ipv6_fl(struct ipv6hdr *nh, u32 fl, u32 mask)
+static void set_ipv6_dsfield(struct sk_buff *skb, struct ipv6hdr *nh, u8 ipv6_tclass, u8 mask)
{
+ u8 old_ipv6_tclass = ipv6_get_dsfield(nh);
+
+ ipv6_tclass = OVS_MASKED(old_ipv6_tclass, ipv6_tclass, mask);
+
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ csum_replace(&skb->csum, (__force __wsum)(old_ipv6_tclass << 12),
+ (__force __wsum)(ipv6_tclass << 12));
+
+ ipv6_change_dsfield(nh, ~mask, ipv6_tclass);
+}
+
+static void set_ipv6_fl(struct sk_buff *skb, struct ipv6hdr *nh, u32 fl, u32 mask)
+{
+ u32 ofl;
+
+ ofl = nh->flow_lbl[0] << 16 | nh->flow_lbl[1] << 8 | nh->flow_lbl[2];
+ fl = OVS_MASKED(ofl, fl, mask);
+
/* Bits 21-24 are always unmasked, so this retains their values. */
- OVS_SET_MASKED(nh->flow_lbl[0], (u8)(fl >> 16), (u8)(mask >> 16));
- OVS_SET_MASKED(nh->flow_lbl[1], (u8)(fl >> 8), (u8)(mask >> 8));
- OVS_SET_MASKED(nh->flow_lbl[2], (u8)fl, (u8)mask);
+ nh->flow_lbl[0] = (u8)(fl >> 16);
+ nh->flow_lbl[1] = (u8)(fl >> 8);
+ nh->flow_lbl[2] = (u8)fl;
+
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ csum_replace(&skb->csum, (__force __wsum)htonl(ofl), (__force __wsum)htonl(fl));
+}
+
+static void set_ipv6_ttl(struct sk_buff *skb, struct ipv6hdr *nh, u8 new_ttl, u8 mask)
+{
+ new_ttl = OVS_MASKED(nh->hop_limit, new_ttl, mask);
+
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ csum_replace(&skb->csum, (__force __wsum)(nh->hop_limit << 8),
+ (__force __wsum)(new_ttl << 8));
+ nh->hop_limit = new_ttl;
}
static void set_ip_ttl(struct sk_buff *skb, struct iphdr *nh, u8 new_ttl,
@@ -550,18 +581,17 @@ static int set_ipv6(struct sk_buff *skb,
}
}
if (mask->ipv6_tclass) {
- ipv6_change_dsfield(nh, ~mask->ipv6_tclass, key->ipv6_tclass);
+ set_ipv6_dsfield(skb, nh, key->ipv6_tclass, mask->ipv6_tclass);
flow_key->ip.tos = ipv6_get_dsfield(nh);
}
if (mask->ipv6_label) {
- set_ipv6_fl(nh, ntohl(key->ipv6_label),
+ set_ipv6_fl(skb, nh, ntohl(key->ipv6_label),
ntohl(mask->ipv6_label));
flow_key->ipv6.label =
*(__be32 *)nh & htonl(IPV6_FLOWINFO_FLOWLABEL);
}
if (mask->ipv6_hlimit) {
- OVS_SET_MASKED(nh->hop_limit, key->ipv6_hlimit,
- mask->ipv6_hlimit);
+ set_ipv6_ttl(skb, nh, key->ipv6_hlimit, mask->ipv6_hlimit);
flow_key->ip.ttl = nh->hop_limit;
}
return 0;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 21/53] drm/edid: Always set RGB444
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 20/53] openvswitch: Fix setting ipv6 fields causing hw csum failure Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 22/53] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure Greg Kroah-Hartman
` (38 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä,
Matthias Reichl, Maxime Ripard
From: Maxime Ripard <maxime@cerno.tech>
commit ecbd4912a693b862e25cba0a6990a8c95b00721e upstream.
In order to fill the drm_display_info structure each time an EDID is
read, the code currently will call drm_add_display_info with the parsed
EDID.
drm_add_display_info will then call drm_reset_display_info to reset all
the fields to 0, and then set them to the proper value depending on the
EDID.
In the color_formats case, we will thus report that we don't support any
color format, and then fill it back with RGB444 plus the additional
formats described in the EDID Feature Support byte.
However, since that byte only contains format-related bits since the 1.4
specification, this doesn't happen if the EDID is following an earlier
specification. In turn, it means that for one of these EDID, we end up
with color_formats set to 0.
The EDID 1.3 specification never really specifies what it means by RGB
exactly, but since both HDMI and DVI will use RGB444, it's fairly safe
to assume it's supposed to be RGB444.
Let's move the addition of RGB444 to color_formats earlier in
drm_add_display_info() so that it's always set for a digital display.
Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_edid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4659,6 +4659,7 @@ u32 drm_add_display_info(struct drm_conn
if (!(edid->input & DRM_EDID_INPUT_DIGITAL))
return quirks;
+ info->color_formats |= DRM_COLOR_FORMAT_RGB444;
drm_parse_cea_ext(connector, edid);
/*
@@ -4707,7 +4708,6 @@ u32 drm_add_display_info(struct drm_conn
DRM_DEBUG("%s: Assigning EDID-1.4 digital sink color depth as %d bpc.\n",
connector->name, info->bpc);
- info->color_formats |= DRM_COLOR_FORMAT_RGB444;
if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444)
info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 22/53] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 21/53] drm/edid: Always set RGB444 Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 23/53] net: ll_temac: check the return value of devm_kmalloc() Greg Kroah-Hartman
` (37 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gal Pressman, Tariq Toukan, Saeed Mahameed
From: Gal Pressman <gal@nvidia.com>
commit 0b89429722353d112f8b8b29ca397e95fa994d27 upstream.
The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.
Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1683,7 +1683,7 @@ static int mlx5e_get_module_eeprom(struc
if (size_read < 0) {
netdev_err(priv->netdev, "%s: mlx5_query_eeprom failed:0x%x\n",
__func__, size_read);
- return 0;
+ return size_read;
}
i += size_read;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 23/53] net: ll_temac: check the return value of devm_kmalloc()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 22/53] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 24/53] net: Force inlining of checksum functions in net/checksum.h Greg Kroah-Hartman
` (36 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Xiaoke Wang, David S. Miller
From: Xiaoke Wang <xkernel.wang@foxmail.com>
commit b352c3465bb808ab700d03f5bac2f7a6f37c5350 upstream.
devm_kmalloc() returns a pointer to allocated memory on success, NULL
on failure. While lp->indirect_lock is allocated by devm_kmalloc()
without proper check. It is better to check the value of it to
prevent potential wrong memory access.
Fixes: f14f5c11f051 ("net: ll_temac: Support indirect_mutex share within TEMAC IP")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -1345,6 +1345,8 @@ static int temac_probe(struct platform_d
lp->indirect_lock = devm_kmalloc(&pdev->dev,
sizeof(*lp->indirect_lock),
GFP_KERNEL);
+ if (!lp->indirect_lock)
+ return -ENOMEM;
spin_lock_init(lp->indirect_lock);
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 24/53] net: Force inlining of checksum functions in net/checksum.h
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 23/53] net: ll_temac: check the return value of devm_kmalloc() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 25/53] nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() Greg Kroah-Hartman
` (35 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Nick Desaulniers,
Andrew Morton, Christophe Leroy, David S. Miller
From: Christophe Leroy <christophe.leroy@csgroup.eu>
commit 5486f5bf790b5c664913076c3194b8f916a5c7ad upstream.
All functions defined as static inline in net/checksum.h are
meant to be inlined for performance reason.
But since commit ac7c3e4ff401 ("compiler: enable
CONFIG_OPTIMIZE_INLINING forcibly") the compiler is allowed to
uninline functions when it wants.
Fair enough in the general case, but for tiny performance critical
checksum helpers that's counter-productive.
The problem mainly arises when selecting CONFIG_CC_OPTIMISE_FOR_SIZE,
Those helpers being 'static inline' in header files you suddenly find
them duplicated many times in the resulting vmlinux.
Here is a typical exemple when building powerpc pmac32_defconfig
with CONFIG_CC_OPTIMISE_FOR_SIZE. csum_sub() appears 4 times:
c04a23cc <csum_sub>:
c04a23cc: 7c 84 20 f8 not r4,r4
c04a23d0: 7c 63 20 14 addc r3,r3,r4
c04a23d4: 7c 63 01 94 addze r3,r3
c04a23d8: 4e 80 00 20 blr
...
c04a2ce8: 4b ff f6 e5 bl c04a23cc <csum_sub>
...
c04a2d2c: 4b ff f6 a1 bl c04a23cc <csum_sub>
...
c04a2d54: 4b ff f6 79 bl c04a23cc <csum_sub>
...
c04a754c <csum_sub>:
c04a754c: 7c 84 20 f8 not r4,r4
c04a7550: 7c 63 20 14 addc r3,r3,r4
c04a7554: 7c 63 01 94 addze r3,r3
c04a7558: 4e 80 00 20 blr
...
c04ac930: 4b ff ac 1d bl c04a754c <csum_sub>
...
c04ad264: 4b ff a2 e9 bl c04a754c <csum_sub>
...
c04e3b08 <csum_sub>:
c04e3b08: 7c 84 20 f8 not r4,r4
c04e3b0c: 7c 63 20 14 addc r3,r3,r4
c04e3b10: 7c 63 01 94 addze r3,r3
c04e3b14: 4e 80 00 20 blr
...
c04e5788: 4b ff e3 81 bl c04e3b08 <csum_sub>
...
c04e65c8: 4b ff d5 41 bl c04e3b08 <csum_sub>
...
c0512d34 <csum_sub>:
c0512d34: 7c 84 20 f8 not r4,r4
c0512d38: 7c 63 20 14 addc r3,r3,r4
c0512d3c: 7c 63 01 94 addze r3,r3
c0512d40: 4e 80 00 20 blr
...
c0512dfc: 4b ff ff 39 bl c0512d34 <csum_sub>
...
c05138bc: 4b ff f4 79 bl c0512d34 <csum_sub>
...
Restore the expected behaviour by using __always_inline for all
functions defined in net/checksum.h
vmlinux size is even reduced by 256 bytes with this patch:
text data bss dec hex filename
6980022 2515362 194384 9689768 93daa8 vmlinux.before
6979862 2515266 194384 9689512 93d9a8 vmlinux.now
Fixes: ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly")
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/checksum.h | 41 +++++++++++++++++++++--------------------
1 file changed, 21 insertions(+), 20 deletions(-)
--- a/include/net/checksum.h
+++ b/include/net/checksum.h
@@ -22,7 +22,7 @@
#include <asm/checksum.h>
#ifndef _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
-static inline
+static __always_inline
__wsum csum_and_copy_from_user (const void __user *src, void *dst,
int len, __wsum sum, int *err_ptr)
{
@@ -37,7 +37,7 @@ __wsum csum_and_copy_from_user (const vo
#endif
#ifndef HAVE_CSUM_COPY_USER
-static __inline__ __wsum csum_and_copy_to_user
+static __always_inline __wsum csum_and_copy_to_user
(const void *src, void __user *dst, int len, __wsum sum, int *err_ptr)
{
sum = csum_partial(src, len, sum);
@@ -54,7 +54,7 @@ static __inline__ __wsum csum_and_copy_t
#endif
#ifndef HAVE_ARCH_CSUM_ADD
-static inline __wsum csum_add(__wsum csum, __wsum addend)
+static __always_inline __wsum csum_add(__wsum csum, __wsum addend)
{
u32 res = (__force u32)csum;
res += (__force u32)addend;
@@ -62,12 +62,12 @@ static inline __wsum csum_add(__wsum csu
}
#endif
-static inline __wsum csum_sub(__wsum csum, __wsum addend)
+static __always_inline __wsum csum_sub(__wsum csum, __wsum addend)
{
return csum_add(csum, ~addend);
}
-static inline __sum16 csum16_add(__sum16 csum, __be16 addend)
+static __always_inline __sum16 csum16_add(__sum16 csum, __be16 addend)
{
u16 res = (__force u16)csum;
@@ -75,12 +75,12 @@ static inline __sum16 csum16_add(__sum16
return (__force __sum16)(res + (res < (__force u16)addend));
}
-static inline __sum16 csum16_sub(__sum16 csum, __be16 addend)
+static __always_inline __sum16 csum16_sub(__sum16 csum, __be16 addend)
{
return csum16_add(csum, ~addend);
}
-static inline __wsum
+static __always_inline __wsum
csum_block_add(__wsum csum, __wsum csum2, int offset)
{
u32 sum = (__force u32)csum2;
@@ -92,36 +92,37 @@ csum_block_add(__wsum csum, __wsum csum2
return csum_add(csum, (__force __wsum)sum);
}
-static inline __wsum
+static __always_inline __wsum
csum_block_add_ext(__wsum csum, __wsum csum2, int offset, int len)
{
return csum_block_add(csum, csum2, offset);
}
-static inline __wsum
+static __always_inline __wsum
csum_block_sub(__wsum csum, __wsum csum2, int offset)
{
return csum_block_add(csum, ~csum2, offset);
}
-static inline __wsum csum_unfold(__sum16 n)
+static __always_inline __wsum csum_unfold(__sum16 n)
{
return (__force __wsum)n;
}
-static inline __wsum csum_partial_ext(const void *buff, int len, __wsum sum)
+static __always_inline
+__wsum csum_partial_ext(const void *buff, int len, __wsum sum)
{
return csum_partial(buff, len, sum);
}
#define CSUM_MANGLED_0 ((__force __sum16)0xffff)
-static inline void csum_replace_by_diff(__sum16 *sum, __wsum diff)
+static __always_inline void csum_replace_by_diff(__sum16 *sum, __wsum diff)
{
*sum = csum_fold(csum_add(diff, ~csum_unfold(*sum)));
}
-static inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to)
+static __always_inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to)
{
__wsum tmp = csum_sub(~csum_unfold(*sum), (__force __wsum)from);
@@ -134,7 +135,7 @@ static inline void csum_replace4(__sum16
* m : old value of a 16bit field
* m' : new value of a 16bit field
*/
-static inline void csum_replace2(__sum16 *sum, __be16 old, __be16 new)
+static __always_inline void csum_replace2(__sum16 *sum, __be16 old, __be16 new)
{
*sum = ~csum16_add(csum16_sub(~(*sum), old), new);
}
@@ -153,16 +154,16 @@ void inet_proto_csum_replace16(__sum16 *
void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
__wsum diff, bool pseudohdr);
-static inline void inet_proto_csum_replace2(__sum16 *sum, struct sk_buff *skb,
- __be16 from, __be16 to,
- bool pseudohdr)
+static __always_inline
+void inet_proto_csum_replace2(__sum16 *sum, struct sk_buff *skb,
+ __be16 from, __be16 to, bool pseudohdr)
{
inet_proto_csum_replace4(sum, skb, (__force __be32)from,
(__force __be32)to, pseudohdr);
}
-static inline __wsum remcsum_adjust(void *ptr, __wsum csum,
- int start, int offset)
+static __always_inline __wsum remcsum_adjust(void *ptr, __wsum csum,
+ int start, int offset)
{
__sum16 *psum = (__sum16 *)(ptr + offset);
__wsum delta;
@@ -178,7 +179,7 @@ static inline __wsum remcsum_adjust(void
return delta;
}
-static inline void remcsum_unadjust(__sum16 *psum, __wsum delta)
+static __always_inline void remcsum_unadjust(__sum16 *psum, __wsum delta)
{
*psum = csum_fold(csum_sub(delta, (__force __wsum)*psum));
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 25/53] nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 24/53] net: Force inlining of checksum functions in net/checksum.h Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 26/53] netfilter: nf_tables: fix memory leak during stateful obj update Greg Kroah-Hartman
` (34 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Simon Horman,
Jakub Kicinski
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
commit 3a14d0888eb4b0045884126acc69abfb7b87814d upstream.
ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX)
inclusive.
So NFP_MAX_MAC_INDEX (0xff) is a valid id.
In order for the error handling path to work correctly, the 'invalid'
value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range,
inclusive.
So set it to -1.
Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220218131535.100258-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
@@ -588,8 +588,8 @@ nfp_tunnel_add_shared_mac(struct nfp_app
int port, bool mod)
{
struct nfp_flower_priv *priv = app->priv;
- int ida_idx = NFP_MAX_MAC_INDEX, err;
struct nfp_tun_offloaded_mac *entry;
+ int ida_idx = -1, err;
u16 nfp_mac_idx = 0;
entry = nfp_tunnel_lookup_offloaded_macs(app, netdev->dev_addr);
@@ -663,7 +663,7 @@ err_remove_hash:
err_free_entry:
kfree(entry);
err_free_ida:
- if (ida_idx != NFP_MAX_MAC_INDEX)
+ if (ida_idx != -1)
ida_simple_remove(&priv->tun.mac_off_ids, ida_idx);
return err;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 26/53] netfilter: nf_tables: fix memory leak during stateful obj update
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 25/53] nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 27/53] net/mlx5: Fix possible deadlock on rule deletion Greg Kroah-Hartman
` (33 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fernando Fernandez Mancera,
Florian Westphal, Pablo Neira Ayuso
From: Florian Westphal <fw@strlen.de>
commit dad3bdeef45f81a6e90204bcc85360bb76eccec7 upstream.
stateful objects can be updated from the control plane.
The transaction logic allocates a temporary object for this purpose.
The ->init function was called for this object, so plain kfree() leaks
resources. We must call ->destroy function of the object.
nft_obj_destroy does this, but it also decrements the module refcount,
but the update path doesn't increment it.
To avoid special-casing the update object release, do module_get for
the update case too and release it via nft_obj_destroy().
Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation")
Cc: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/nf_tables_api.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -5184,12 +5184,15 @@ static int nf_tables_updobj(const struct
{
struct nft_object *newobj;
struct nft_trans *trans;
- int err;
+ int err = -ENOMEM;
+
+ if (!try_module_get(type->owner))
+ return -ENOENT;
trans = nft_trans_alloc(ctx, NFT_MSG_NEWOBJ,
sizeof(struct nft_trans_obj));
if (!trans)
- return -ENOMEM;
+ goto err_trans;
newobj = nft_obj_init(ctx, type, attr);
if (IS_ERR(newobj)) {
@@ -5206,6 +5209,8 @@ static int nf_tables_updobj(const struct
err_free_trans:
kfree(trans);
+err_trans:
+ module_put(type->owner);
return err;
}
@@ -6544,7 +6549,7 @@ static void nft_obj_commit_update(struct
if (obj->ops->update)
obj->ops->update(obj, newobj);
- kfree(newobj);
+ nft_obj_destroy(&trans->ctx, newobj);
}
static void nft_commit_release(struct nft_trans *trans)
@@ -7109,7 +7114,7 @@ static int __nf_tables_abort(struct net
break;
case NFT_MSG_NEWOBJ:
if (nft_trans_obj_update(trans)) {
- kfree(nft_trans_obj_newobj(trans));
+ nft_obj_destroy(&trans->ctx, nft_trans_obj_newobj(trans));
nft_trans_destroy(trans);
} else {
trans->ctx.table->use--;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 27/53] net/mlx5: Fix possible deadlock on rule deletion
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 26/53] netfilter: nf_tables: fix memory leak during stateful obj update Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 28/53] net/mlx5: Fix wrong limitation of metadata match on ecpf Greg Kroah-Hartman
` (32 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maor Gottlieb, Mark Bloch, Saeed Mahameed
From: Maor Gottlieb <maorg@nvidia.com>
commit b645e57debca846f51b3209907546ea857ddd3f5 upstream.
Add missing call to up_write_ref_node() which releases the semaphore
in case the FTE doesn't have destinations, such in drop rule case.
Fixes: 465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1947,6 +1947,8 @@ void mlx5_del_flow_rules(struct mlx5_flo
fte->node.del_hw_func = NULL;
up_write_ref_node(&fte->node, false);
tree_put_node(&fte->node, false);
+ } else {
+ up_write_ref_node(&fte->node, false);
}
kfree(handle);
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 28/53] net/mlx5: Fix wrong limitation of metadata match on ecpf
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 27/53] net/mlx5: Fix possible deadlock on rule deletion Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 29/53] spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() Greg Kroah-Hartman
` (31 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ariel Levkovich, Maor Dickman,
Saeed Mahameed
From: Ariel Levkovich <lariel@nvidia.com>
commit 07666c75ad17d7389b18ac0235c8cf41e1504ea8 upstream.
Match metadata support check returns false for ecpf device.
However, this support does exist for ecpf and therefore this
limitation should be removed to allow feature such as stacked
devices and internal port offloaded to be supported.
Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -1977,10 +1977,6 @@ esw_check_vport_match_metadata_supported
if (!MLX5_CAP_ESW_FLOWTABLE(esw->dev, flow_source))
return false;
- if (mlx5_core_is_ecpf_esw_manager(esw->dev) ||
- mlx5_ecpf_vport_exists(esw->dev))
- return false;
-
return true;
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 29/53] spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 28/53] net/mlx5: Fix wrong limitation of metadata match on ecpf Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 30/53] configfs: fix a race in configfs_{,un}register_subsystem() Greg Kroah-Hartman
` (30 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhou Qingyang, Mark Brown, Sasha Levin
From: Zhou Qingyang <zhou1615@umn.edu>
[ Upstream commit ab3824427b848da10e9fe2727f035bbeecae6ff4 ]
In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(),
which could lead to a NULL pointer dereference on failure of
kzalloc().
Fix this bug by adding a check of tmpbuf.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172253.203700-1-zhou1615@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynq-qspi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 1ced6eb8b3303..b3588240eb39b 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -558,6 +558,9 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
if (op->dummy.nbytes) {
tmpbuf = kzalloc(op->dummy.nbytes, GFP_KERNEL);
+ if (!tmpbuf)
+ return -ENOMEM;
+
memset(tmpbuf, 0xff, op->dummy.nbytes);
reinit_completion(&xqspi->data_completion);
xqspi->txbuf = tmpbuf;
--
2.34.1
^ permalink raw reply related [flat|nested] 61+ messages in thread* [PATCH 5.4 30/53] configfs: fix a race in configfs_{,un}register_subsystem()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 29/53] spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 31/53] RDMA/ib_srp: Fix a deadlock Greg Kroah-Hartman
` (29 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, ChenXiaoSong, Laibin Qiu,
Christoph Hellwig, Sasha Levin
From: ChenXiaoSong <chenxiaosong2@huawei.com>
[ Upstream commit 84ec758fb2daa236026506868c8796b0500c047d ]
When configfs_register_subsystem() or configfs_unregister_subsystem()
is executing link_group() or unlink_group(),
it is possible that two processes add or delete list concurrently.
Some unfortunate interleavings of them can cause kernel panic.
One of cases is:
A --> B --> C --> D
A <-- B <-- C <-- D
delete list_head *B | delete list_head *C
--------------------------------|-----------------------------------
configfs_unregister_subsystem | configfs_unregister_subsystem
unlink_group | unlink_group
unlink_obj | unlink_obj
list_del_init | list_del_init
__list_del_entry | __list_del_entry
__list_del | __list_del
// next == C |
next->prev = prev |
| next->prev = prev
prev->next = next |
| // prev == B
| prev->next = next
Fix this by adding mutex when calling link_group() or unlink_group(),
but parent configfs_subsystem is NULL when config_item is root.
So I create a mutex configfs_subsystem_mutex.
Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/configfs/dir.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 2992cebb78661..d73d88d9c2598 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -36,6 +36,14 @@
*/
DEFINE_SPINLOCK(configfs_dirent_lock);
+/*
+ * All of link_obj/unlink_obj/link_group/unlink_group require that
+ * subsys->su_mutex is held.
+ * But parent configfs_subsystem is NULL when config_item is root.
+ * Use this mutex when config_item is root.
+ */
+static DEFINE_MUTEX(configfs_subsystem_mutex);
+
static void configfs_d_iput(struct dentry * dentry,
struct inode * inode)
{
@@ -1884,7 +1892,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
group->cg_item.ci_name = group->cg_item.ci_namebuf;
sd = root->d_fsdata;
+ mutex_lock(&configfs_subsystem_mutex);
link_group(to_config_group(sd->s_element), group);
+ mutex_unlock(&configfs_subsystem_mutex);
inode_lock_nested(d_inode(root), I_MUTEX_PARENT);
@@ -1909,7 +1919,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
inode_unlock(d_inode(root));
if (err) {
+ mutex_lock(&configfs_subsystem_mutex);
unlink_group(group);
+ mutex_unlock(&configfs_subsystem_mutex);
configfs_release_fs();
}
put_fragment(frag);
@@ -1956,7 +1968,9 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys)
dput(dentry);
+ mutex_lock(&configfs_subsystem_mutex);
unlink_group(group);
+ mutex_unlock(&configfs_subsystem_mutex);
configfs_release_fs();
}
--
2.34.1
^ permalink raw reply related [flat|nested] 61+ messages in thread* [PATCH 5.4 31/53] RDMA/ib_srp: Fix a deadlock
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 30/53] configfs: fix a race in configfs_{,un}register_subsystem() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 32/53] tracing: Have traceon and traceoff trigger honor the instance Greg Kroah-Hartman
` (28 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+831661966588c802aae9,
Bart Van Assche, Leon Romanovsky, Jason Gunthorpe, Sasha Levin
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit 081bdc9fe05bb23248f5effb6f811da3da4b8252 ]
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync()
Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org
Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD")
Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/srp/ib_srp.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 8708ed5477e99..dac806b715afa 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -4222,9 +4222,11 @@ static void srp_remove_one(struct ib_device *device, void *client_data)
spin_unlock(&host->target_lock);
/*
- * Wait for tl_err and target port removal tasks.
+ * srp_queue_remove_work() queues a call to
+ * srp_remove_target(). The latter function cancels
+ * target->tl_err_work so waiting for the remove works to
+ * finish is sufficient.
*/
- flush_workqueue(system_long_wq);
flush_workqueue(srp_remove_wq);
kfree(host);
--
2.34.1
^ permalink raw reply related [flat|nested] 61+ messages in thread* [PATCH 5.4 32/53] tracing: Have traceon and traceoff trigger honor the instance
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 31/53] RDMA/ib_srp: Fix a deadlock Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 33/53] iio: adc: men_z188_adc: Fix a resource leak in an error handling path Greg Kroah-Hartman
` (27 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Bristot de Oliveira,
Tom Zanussi, Steven Rostedt (Google)
From: Steven Rostedt (Google) <rostedt@goodmis.org>
commit 302e9edd54985f584cfc180098f3554774126969 upstream.
If a trigger is set on an event to disable or enable tracing within an
instance, then tracing should be disabled or enabled in the instance and
not at the top level, which is confusing to users.
Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home
Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace_events_trigger.c | 52 +++++++++++++++++++++++++++++++-----
1 file changed, 46 insertions(+), 6 deletions(-)
--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -940,6 +940,16 @@ static void
traceon_trigger(struct event_trigger_data *data, void *rec,
struct ring_buffer_event *event)
{
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (tracer_tracing_is_on(file->tr))
+ return;
+
+ tracer_tracing_on(file->tr);
+ return;
+ }
+
if (tracing_is_on())
return;
@@ -950,8 +960,15 @@ static void
traceon_count_trigger(struct event_trigger_data *data, void *rec,
struct ring_buffer_event *event)
{
- if (tracing_is_on())
- return;
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (tracer_tracing_is_on(file->tr))
+ return;
+ } else {
+ if (tracing_is_on())
+ return;
+ }
if (!data->count)
return;
@@ -959,13 +976,26 @@ traceon_count_trigger(struct event_trigg
if (data->count != -1)
(data->count)--;
- tracing_on();
+ if (file)
+ tracer_tracing_on(file->tr);
+ else
+ tracing_on();
}
static void
traceoff_trigger(struct event_trigger_data *data, void *rec,
struct ring_buffer_event *event)
{
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (!tracer_tracing_is_on(file->tr))
+ return;
+
+ tracer_tracing_off(file->tr);
+ return;
+ }
+
if (!tracing_is_on())
return;
@@ -976,8 +1006,15 @@ static void
traceoff_count_trigger(struct event_trigger_data *data, void *rec,
struct ring_buffer_event *event)
{
- if (!tracing_is_on())
- return;
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (!tracer_tracing_is_on(file->tr))
+ return;
+ } else {
+ if (!tracing_is_on())
+ return;
+ }
if (!data->count)
return;
@@ -985,7 +1022,10 @@ traceoff_count_trigger(struct event_trig
if (data->count != -1)
(data->count)--;
- tracing_off();
+ if (file)
+ tracer_tracing_off(file->tr);
+ else
+ tracing_off();
}
static int
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 33/53] iio: adc: men_z188_adc: Fix a resource leak in an error handling path
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 32/53] tracing: Have traceon and traceoff trigger honor the instance Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 34/53] iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits Greg Kroah-Hartman
` (26 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Stable, Jonathan Cameron
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
commit e0a2e37f303828d030a83f33ffe14b36cb88d563 upstream.
If iio_device_register() fails, a previous ioremap() is left unbalanced.
Update the error handling path and add the missing iounmap() call, as
already done in the remove function.
Fixes: 74aeac4da66f ("iio: adc: Add MEN 16z188 ADC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.1643445149.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/men_z188_adc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/men_z188_adc.c
+++ b/drivers/iio/adc/men_z188_adc.c
@@ -103,6 +103,7 @@ static int men_z188_probe(struct mcb_dev
struct z188_adc *adc;
struct iio_dev *indio_dev;
struct resource *mem;
+ int ret;
indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct z188_adc));
if (!indio_dev)
@@ -129,8 +130,14 @@ static int men_z188_probe(struct mcb_dev
adc->mem = mem;
mcb_set_drvdata(dev, indio_dev);
- return iio_device_register(indio_dev);
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto err_unmap;
+ return 0;
+
+err_unmap:
+ iounmap(adc->base);
err:
mcb_release_mem(mem);
return -ENXIO;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 34/53] iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 33/53] iio: adc: men_z188_adc: Fix a resource leak in an error handling path Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 35/53] iio: Fix error handling for PM Greg Kroah-Hartman
` (25 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Cosmin Tanislav, Stable, Jonathan Cameron
From: Cosmin Tanislav <demonsingur@gmail.com>
commit 0e33d15f1dce9e3a80a970ea7f0b27837168aeca upstream.
According to page 90 of the datasheet [1], AIN_BUFP is bit 6 and
AIN_BUFM is bit 5 of the CONFIG_0 -> CONFIG_7 registers.
Fix the mask used for setting these bits.
[1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7124-8.pdf
Fixes: 0eaecea6e487 ("iio: adc: ad7124: Add buffered input support")
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20220112200036.694490-1-cosmin.tanislav@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad7124.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -63,7 +63,7 @@
#define AD7124_CONFIG_REF_SEL(x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
#define AD7124_CONFIG_PGA_MSK GENMASK(2, 0)
#define AD7124_CONFIG_PGA(x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
-#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(7, 6)
+#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(6, 5)
#define AD7124_CONFIG_IN_BUFF(x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)
/* AD7124_FILTER_X */
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 35/53] iio: Fix error handling for PM
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 34/53] iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 36/53] ata: pata_hpt37x: disable primary channel on HPT371 Greg Kroah-Hartman
` (24 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Andy Shevchenko,
Stable, Jonathan Cameron
From: Miaoqian Lin <linmq006@gmail.com>
commit 632fe0bb8c5b9c06ec961f575ee42a6fff5eceeb upstream.
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). In the PM Runtime docs:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.
Fix this problem for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553.
Fixes: 7d0ead5c3f00 ("iio: Reconcile operation order between iio_register/unregister and pm functions")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/bmc150-accel-core.c | 5 ++++-
drivers/iio/accel/kxcjk-1013.c | 5 ++++-
drivers/iio/accel/mma9551.c | 5 ++++-
drivers/iio/accel/mma9553.c | 5 ++++-
drivers/iio/gyro/bmg160_core.c | 5 ++++-
drivers/iio/imu/kmx61.c | 5 ++++-
drivers/iio/magnetometer/bmc150_magn.c | 5 +++--
7 files changed, 27 insertions(+), 8 deletions(-)
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -1649,11 +1649,14 @@ int bmc150_accel_core_probe(struct devic
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "Unable to register iio device\n");
- goto err_trigger_unregister;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_disable(dev);
err_trigger_unregister:
bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
err_buffer_cleanup:
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1409,11 +1409,14 @@ static int kxcjk1013_probe(struct i2c_cl
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "unable to register iio device\n");
- goto err_buffer_cleanup;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
--- a/drivers/iio/accel/mma9551.c
+++ b/drivers/iio/accel/mma9551.c
@@ -496,11 +496,14 @@ static int mma9551_probe(struct i2c_clie
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "unable to register iio device\n");
- goto out_poweroff;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
out_poweroff:
mma9551_set_device_state(client, false);
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -1135,12 +1135,15 @@ static int mma9553_probe(struct i2c_clie
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "unable to register iio device\n");
- goto out_poweroff;
+ goto err_pm_cleanup;
}
dev_dbg(&indio_dev->dev, "Registered device %s\n", name);
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
out_poweroff:
mma9551_set_device_state(client, false);
return ret;
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -1173,11 +1173,14 @@ int bmg160_core_probe(struct device *dev
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "unable to register iio device\n");
- goto err_buffer_cleanup;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_disable(dev);
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
--- a/drivers/iio/imu/kmx61.c
+++ b/drivers/iio/imu/kmx61.c
@@ -1393,7 +1393,7 @@ static int kmx61_probe(struct i2c_client
ret = iio_device_register(data->acc_indio_dev);
if (ret < 0) {
dev_err(&client->dev, "Failed to register acc iio device\n");
- goto err_buffer_cleanup_mag;
+ goto err_pm_cleanup;
}
ret = iio_device_register(data->mag_indio_dev);
@@ -1406,6 +1406,9 @@ static int kmx61_probe(struct i2c_client
err_iio_unregister_acc:
iio_device_unregister(data->acc_indio_dev);
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
err_buffer_cleanup_mag:
if (client->irq > 0)
iio_triggered_buffer_cleanup(data->mag_indio_dev);
--- a/drivers/iio/magnetometer/bmc150_magn.c
+++ b/drivers/iio/magnetometer/bmc150_magn.c
@@ -944,13 +944,14 @@ int bmc150_magn_probe(struct device *dev
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "unable to register iio device\n");
- goto err_disable_runtime_pm;
+ goto err_pm_cleanup;
}
dev_dbg(dev, "Registered device %s\n", name);
return 0;
-err_disable_runtime_pm:
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(dev);
pm_runtime_disable(dev);
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 36/53] ata: pata_hpt37x: disable primary channel on HPT371
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 35/53] iio: Fix error handling for PM Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 37/53] Revert "USB: serial: ch341: add new Product ID for CH341A" Greg Kroah-Hartman
` (23 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Damien Le Moal
From: Sergey Shtylyov <s.shtylyov@omp.ru>
commit 8d093e02e898b24c58788b0289e3202317a96d2a upstream.
The HPT371 chip physically has only one channel, the secondary one,
however the primary channel registers do exist! Thus we have to
manually disable the non-existing channel if the BIOS hasn't done this
already. Similarly to the pata_hpt3x2n driver, always disable the
primary channel.
Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/pata_hpt37x.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -918,6 +918,20 @@ static int hpt37x_init_one(struct pci_de
pci_write_config_byte(dev, 0x5a, irqmask);
/*
+ * HPT371 chips physically have only one channel, the secondary one,
+ * but the primary channel registers do exist! Go figure...
+ * So, we manually disable the non-existing channel here
+ * (if the BIOS hasn't done this already).
+ */
+ if (dev->device == PCI_DEVICE_ID_TTI_HPT371) {
+ u8 mcr1;
+
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ mcr1 &= ~0x04;
+ pci_write_config_byte(dev, 0x50, mcr1);
+ }
+
+ /*
* default to pci clock. make sure MA15/16 are set to output
* to prevent drives having problems with 40-pin cables. Needed
* for some drives such as IBM-DTLA which will not enter ready
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 37/53] Revert "USB: serial: ch341: add new Product ID for CH341A"
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 36/53] ata: pata_hpt37x: disable primary channel on HPT371 Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 38/53] usb: gadget: rndis: add spinlock for rndis response list Greg Kroah-Hartman
` (22 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmytro Bagrii, Johan Hovold
From: Dmytro Bagrii <dimich.dmb@gmail.com>
commit 198a7ebd5fa17b4d0be8cb70240ee1be885175c0 upstream.
This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63.
CH341 has Product ID 0x5512 in EPP/MEM mode which is used for
I2C/SPI/GPIO interfaces. In asynchronous serial interface mode
CH341 has PID 0x5523 which is already in the table.
Mode is selected by corresponding jumper setting.
Signed-off-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com
Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ch341.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -80,7 +80,6 @@
#define CH341_LCR_CS5 0x00
static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x1a86, 0x5512) },
{ USB_DEVICE(0x1a86, 0x5523) },
{ USB_DEVICE(0x1a86, 0x7522) },
{ USB_DEVICE(0x1a86, 0x7523) },
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 38/53] usb: gadget: rndis: add spinlock for rndis response list
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 37/53] Revert "USB: serial: ch341: add new Product ID for CH341A" Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 39/53] USB: gadget: validate endpoint index for xilinx udc Greg Kroah-Hartman
` (21 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, stable, Daehwan Jung
From: Daehwan Jung <dh10.jung@samsung.com>
commit aaaba1c86d04dac8e49bf508b492f81506257da3 upstream.
There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.
[ 361.894299] [1: irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (ffffff80651764d0),
but was ffffff883dc36f80. (next=ffffff80651764d0).
[ 361.904380] [1: irq/191-dwc3:16979] Call trace:
[ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90
[ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0
[ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84
[ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4
[ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60
[ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0
[ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc
[ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc
[ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec
[ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c
Fixes: f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe")
Cc: stable <stable@kernel.org>
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/function/rndis.c | 8 ++++++++
drivers/usb/gadget/function/rndis.h | 1 +
2 files changed, 9 insertions(+)
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -922,6 +922,7 @@ struct rndis_params *rndis_register(void
params->resp_avail = resp_avail;
params->v = v;
INIT_LIST_HEAD(¶ms->resp_queue);
+ spin_lock_init(¶ms->resp_lock);
pr_debug("%s: configNr = %d\n", __func__, i);
return params;
@@ -1015,12 +1016,14 @@ void rndis_free_response(struct rndis_pa
{
rndis_resp_t *r, *n;
+ spin_lock(¶ms->resp_lock);
list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) {
if (r->buf == buf) {
list_del(&r->list);
kfree(r);
}
}
+ spin_unlock(¶ms->resp_lock);
}
EXPORT_SYMBOL_GPL(rndis_free_response);
@@ -1030,14 +1033,17 @@ u8 *rndis_get_next_response(struct rndis
if (!length) return NULL;
+ spin_lock(¶ms->resp_lock);
list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) {
if (!r->send) {
r->send = 1;
*length = r->length;
+ spin_unlock(¶ms->resp_lock);
return r->buf;
}
}
+ spin_unlock(¶ms->resp_lock);
return NULL;
}
EXPORT_SYMBOL_GPL(rndis_get_next_response);
@@ -1054,7 +1060,9 @@ static rndis_resp_t *rndis_add_response(
r->length = length;
r->send = 0;
+ spin_lock(¶ms->resp_lock);
list_add_tail(&r->list, ¶ms->resp_queue);
+ spin_unlock(¶ms->resp_lock);
return r;
}
--- a/drivers/usb/gadget/function/rndis.h
+++ b/drivers/usb/gadget/function/rndis.h
@@ -174,6 +174,7 @@ typedef struct rndis_params {
void (*resp_avail)(void *v);
void *v;
struct list_head resp_queue;
+ spinlock_t resp_lock;
} rndis_params;
/* RNDIS Message parser and other useless functions */
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 39/53] USB: gadget: validate endpoint index for xilinx udc
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 38/53] usb: gadget: rndis: add spinlock for rndis response list Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 40/53] tracefs: Set the group ownership in apply_options() not parse_options() Greg Kroah-Hartman
` (20 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Szymon Heidrich, stable
From: Szymon Heidrich <szymon.heidrich@gmail.com>
commit 7f14c7227f342d9932f9b918893c8814f86d2a0d upstream.
Assure that host may not manipulate the index to point
past endpoint array.
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/udc/udc-xilinx.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -1613,6 +1613,8 @@ static void xudc_getstatus(struct xusb_u
break;
case USB_RECIP_ENDPOINT:
epnum = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+ if (epnum >= XUSB_MAX_ENDPOINTS)
+ goto stall;
target_ep = &udc->ep[epnum];
epcfgreg = udc->read_fn(udc->addr + target_ep->offset);
halt = epcfgreg & XUSB_EP_CFG_STALL_MASK;
@@ -1680,6 +1682,10 @@ static void xudc_set_clear_feature(struc
case USB_RECIP_ENDPOINT:
if (!udc->setup.wValue) {
endpoint = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+ if (endpoint >= XUSB_MAX_ENDPOINTS) {
+ xudc_ep0_stall(udc);
+ return;
+ }
target_ep = &udc->ep[endpoint];
outinbit = udc->setup.wIndex & USB_ENDPOINT_DIR_MASK;
outinbit = outinbit >> 7;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 40/53] tracefs: Set the group ownership in apply_options() not parse_options()
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 39/53] USB: gadget: validate endpoint index for xilinx udc Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 41/53] USB: serial: option: add support for DW5829e Greg Kroah-Hartman
` (19 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro, Steven Rostedt (Google)
From: Steven Rostedt (Google) <rostedt@goodmis.org>
commit 851e99ebeec3f4a672bb5010cf1ece095acee447 upstream.
Al Viro brought it to my attention that the dentries may not be filled
when the parse_options() is called, causing the call to set_gid() to
possibly crash. It should only be called if parse_options() succeeds
totally anyway.
He suggested the logical place to do the update is in apply_options().
Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/
Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/tracefs/inode.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -262,7 +262,6 @@ static int tracefs_parse_options(char *d
if (!gid_valid(gid))
return -EINVAL;
opts->gid = gid;
- set_gid(tracefs_mount->mnt_root, gid);
break;
case Opt_mode:
if (match_octal(&args[0], &option))
@@ -289,7 +288,9 @@ static int tracefs_apply_options(struct
inode->i_mode |= opts->mode;
inode->i_uid = opts->uid;
- inode->i_gid = opts->gid;
+
+ /* Set all the group ids to the mount option */
+ set_gid(sb->s_root, opts->gid);
return 0;
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 41/53] USB: serial: option: add support for DW5829e
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 40/53] tracefs: Set the group ownership in apply_options() not parse_options() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 42/53] USB: serial: option: add Telit LE910R1 compositions Greg Kroah-Hartman
` (18 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Slark Xiao, Johan Hovold
From: Slark Xiao <slark_xiao@163.com>
commit 6ecb3f0b18b320320460a42e40d6fb603f6ded96 upstream.
Dell DW5829e same as DW5821e except CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
There are 2 types product of DW5829e: normal and eSIM.
So we will add 2 PID for DW5829e.
And for each PID, it support MBIM or RMNET.
Let's see test evidence as below:
DW5829e MBIM mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e RMNET mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
DW5829e-eSIM MBIM mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e-eSIM RMNET mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA
port. So it's banned from serial option driver.
The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com
[ johan: drop unnecessary reservation of interface 1 ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -198,6 +198,8 @@ static void option_instat_callback(struc
#define DELL_PRODUCT_5821E 0x81d7
#define DELL_PRODUCT_5821E_ESIM 0x81e0
+#define DELL_PRODUCT_5829E_ESIM 0x81e4
+#define DELL_PRODUCT_5829E 0x81e6
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
@@ -1063,6 +1065,10 @@ static const struct usb_device_id option
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM),
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E),
+ .driver_info = RSVD(0) | RSVD(6) },
+ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM),
+ .driver_info = RSVD(0) | RSVD(6) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 42/53] USB: serial: option: add Telit LE910R1 compositions
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 41/53] USB: serial: option: add support for DW5829e Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 43/53] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings Greg Kroah-Hartman
` (17 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit cfc4442c642d568014474b6718ccf65dc7ca6099 upstream.
Add support for the following Telit LE910R1 compositions:
0x701a: rndis, tty, tty, tty
0x701b: ecm, tty, tty, tty
0x9201: tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1279,10 +1279,16 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
.driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701a, 0xff), /* Telit LE910R1 (RNDIS) */
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff), /* Telit LE910R1 (ECM) */
+ .driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */
.driver_info = NCTRL(0) | ZLP },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9201), /* Telit LE910R1 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 43/53] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 42/53] USB: serial: option: add Telit LE910R1 compositions Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 44/53] usb: dwc3: gadget: Let the interrupt handler disable bottom halves Greg Kroah-Hartman
` (16 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hans de Goede
From: Hans de Goede <hdegoede@redhat.com>
commit 62e3f0afe246720f7646eb1b034a6897dac34405 upstream.
When the Bay Trail phy GPIO mappings where added cs and reset were swapped,
this did not cause any issues sofar, because sofar they were always driven
high/low at the same time.
Note the new mapping has been verified both in /sys/kernel/debug/gpio
output on Android factory images on multiple devices, as well as in
the schematics for some devices.
Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/dwc3-pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -81,8 +81,8 @@ static const struct acpi_gpio_mapping ac
static struct gpiod_lookup_table platform_bytcr_gpios = {
.dev_id = "0000:00:16.0",
.table = {
- GPIO_LOOKUP("INT33FC:00", 54, "reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("INT33FC:02", 14, "cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH),
{}
},
};
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 44/53] usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 43/53] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 45/53] xhci: re-initialize the HC during resume if HCE was set Greg Kroah-Hartman
` (15 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, Marek Szyprowski,
Sebastian Andrzej Siewior
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
commit 84918a89d6efaff075de570b55642b6f4ceeac6d upstream.
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes: e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3529,9 +3529,11 @@ static irqreturn_t dwc3_thread_interrupt
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
+ local_bh_disable();
spin_lock_irqsave(&dwc->lock, flags);
ret = dwc3_process_event_buf(evt);
spin_unlock_irqrestore(&dwc->lock, flags);
+ local_bh_enable();
return ret;
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 45/53] xhci: re-initialize the HC during resume if HCE was set
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 44/53] usb: dwc3: gadget: Let the interrupt handler disable bottom halves Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 46/53] xhci: Prevent futile URB re-submissions due to incorrect return value Greg Kroah-Hartman
` (14 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Puma Hsu, Mathias Nyman
From: Puma Hsu <pumahsu@google.com>
commit 8b328f8002bcf29ef517ee4bf234e09aabec4d2e upstream.
When HCE(Host Controller Error) is set, it means an internal
error condition has been detected. Software needs to re-initialize
the HC, so add this check in xhci resume.
Cc: stable@vger.kernel.org
Signed-off-by: Puma Hsu <pumahsu@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1091,6 +1091,7 @@ int xhci_resume(struct xhci_hcd *xhci, b
int retval = 0;
bool comp_timer_running = false;
bool pending_portevent = false;
+ bool reinit_xhc = false;
if (!hcd->state)
return 0;
@@ -1107,10 +1108,11 @@ int xhci_resume(struct xhci_hcd *xhci, b
set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
spin_lock_irq(&xhci->lock);
- if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend)
- hibernated = true;
- if (!hibernated) {
+ if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+ reinit_xhc = true;
+
+ if (!reinit_xhc) {
/*
* Some controllers might lose power during suspend, so wait
* for controller not ready bit to clear, just as in xHC init.
@@ -1143,12 +1145,17 @@ int xhci_resume(struct xhci_hcd *xhci, b
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
- temp = readl(&xhci->op_regs->status);
}
- /* If restore operation fails, re-initialize the HC during resume */
- if ((temp & STS_SRE) || hibernated) {
+ temp = readl(&xhci->op_regs->status);
+
+ /* re-initialize the HC on Restore Error, or Host Controller Error */
+ if (temp & (STS_SRE | STS_HCE)) {
+ reinit_xhc = true;
+ xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+ }
+ if (reinit_xhc) {
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
!(xhci_all_ports_seen_u0(xhci))) {
del_timer_sync(&xhci->comp_mode_recovery_timer);
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 46/53] xhci: Prevent futile URB re-submissions due to incorrect return value.
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 45/53] xhci: re-initialize the HC during resume if HCE was set Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 47/53] tty: n_gsm: fix encoding of control signal octet bit DV Greg Kroah-Hartman
` (13 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hongyu Xie, Mathias Nyman
From: Hongyu Xie <xiehongyu1@kylinos.cn>
commit 243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream.
The -ENODEV return value from xhci_check_args() is incorrectly changed
to -EINVAL in a couple places before propagated further.
xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This causes problems for example r8152_submit_rx, calling usb_submit_urb
in drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
is halted because xhci_urb_enqueue returns -EINVAL in the very beginning.
[commit message and header edit -Mathias]
Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1487,9 +1487,12 @@ static int xhci_urb_enqueue(struct usb_h
struct urb_priv *urb_priv;
int num_tds;
- if (!urb || xhci_check_args(hcd, urb->dev, urb->ep,
- true, true, __func__) <= 0)
+ if (!urb)
return -EINVAL;
+ ret = xhci_check_args(hcd, urb->dev, urb->ep,
+ true, true, __func__);
+ if (ret <= 0)
+ return ret ? ret : -EINVAL;
slot_id = urb->dev->slot_id;
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
@@ -3289,7 +3292,7 @@ static int xhci_check_streams_endpoint(s
return -EINVAL;
ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
if (ret <= 0)
- return -EINVAL;
+ return ret ? ret : -EINVAL;
if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) {
xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
" descriptor for ep 0x%x does not support streams\n",
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 47/53] tty: n_gsm: fix encoding of control signal octet bit DV
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 46/53] xhci: Prevent futile URB re-submissions due to incorrect return value Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 48/53] tty: n_gsm: fix proper link termination after failed open Greg Kroah-Hartman
` (12 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit 737b0ef3be6b319d6c1fd64193d1603311969326 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the
control signal octet used by the MSC (modem status command). The same
encoding is also used in convergence layer type 2 as described in chapter
5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for
outgoing control signal octets sent by the DTE (data terminal equipment),
i.e. for the initiator side.
Currently, the DV bit is only set if CD (carrier detect) is on, regardless
of the side.
This patch fixes this behavior by setting the DV bit on the initiator side
unconditionally.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -428,7 +428,7 @@ static u8 gsm_encode_modem(const struct
modembits |= MDM_RTR;
if (dlci->modem_tx & TIOCM_RI)
modembits |= MDM_IC;
- if (dlci->modem_tx & TIOCM_CD)
+ if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
modembits |= MDM_DV;
return modembits;
}
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 48/53] tty: n_gsm: fix proper link termination after failed open
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 47/53] tty: n_gsm: fix encoding of control signal octet bit DV Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 49/53] tty: n_gsm: fix NULL pointer access due to DLCI release Greg Kroah-Hartman
` (11 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit e3b7468f082d106459e86e8dc6fb9bdd65553433 upstream.
Trying to open a DLCI by sending a SABM frame may fail with a timeout.
The link is closed on the initiator side without informing the responder
about this event. The responder assumes the link is open after sending a
UA frame to answer the SABM frame. The link gets stuck in a half open
state.
This patch fixes this by initiating the proper link termination procedure
after link setup timeout instead of silently closing it down.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1490,7 +1490,7 @@ static void gsm_dlci_t1(struct timer_lis
dlci->mode = DLCI_MODE_ADM;
gsm_dlci_open(dlci);
} else {
- gsm_dlci_close(dlci);
+ gsm_dlci_begin_close(dlci); /* prevent half open link */
}
break;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 49/53] tty: n_gsm: fix NULL pointer access due to DLCI release
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 48/53] tty: n_gsm: fix proper link termination after failed open Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 50/53] gpio: tegra186: Fix chip_data type confusion Greg Kroah-Hartman
` (10 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit 96b169f05cdcc844b400695184d77e42071d14f2 upstream.
The here fixed commit made the tty hangup asynchronous to avoid a circular
locking warning. I could not reproduce this warning. Furthermore, due to
the asynchronous hangup the function call now gets queued up while the
underlying tty is being freed. Depending on the timing this results in a
NULL pointer access in the global work queue scheduler. To be precise in
process_one_work(). Therefore, the previous commit made the issue worse
which it tried to fix.
This patch fixes this by falling back to the old behavior which uses a
blocking tty hangup call before freeing up the associated tty.
Fixes: 7030082a7415 ("tty: n_gsm: avoid recursive locking with async port hangup")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1722,7 +1722,12 @@ static void gsm_dlci_release(struct gsm_
gsm_destroy_network(dlci);
mutex_unlock(&dlci->mutex);
- tty_hangup(tty);
+ /* We cannot use tty_hangup() because in tty_kref_put() the tty
+ * driver assumes that the hangup queue is free and reuses it to
+ * queue release_one_tty() -> NULL pointer panic in
+ * process_one_work().
+ */
+ tty_vhangup(tty);
tty_port_tty_set(&dlci->port, NULL);
tty_kref_put(tty);
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 50/53] gpio: tegra186: Fix chip_data type confusion
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 49/53] tty: n_gsm: fix NULL pointer access due to DLCI release Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 51/53] Revert "drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR" Greg Kroah-Hartman
` (9 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marc Zyngier, Thierry Reding,
Linus Walleij, Bartosz Golaszewski
From: Marc Zyngier <maz@kernel.org>
commit d1e972ace42390de739cde87d96043dcbe502286 upstream.
The tegra186 GPIO driver makes the assumption that the pointer
returned by irq_data_get_irq_chip_data() is a pointer to a
tegra_gpio structure. Unfortunately, it is actually a pointer
to the inner gpio_chip structure, as mandated by the gpiolib
infrastructure. Nice try.
The saving grace is that the gpio_chip is the first member of
tegra_gpio, so the bug has gone undetected since... forever.
Fix it by performing a container_of() on the pointer. This results
in no additional code, and makes it possible to understand how
the whole thing works.
Fixes: 5b2b135a87fc ("gpio: Add Tegra186 support")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20220211093904.1112679-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpio/gpio-tegra186.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -234,9 +234,12 @@ static int tegra186_gpio_of_xlate(struct
return offset + pin;
}
+#define to_tegra_gpio(x) container_of((x), struct tegra_gpio, gpio)
+
static void tegra186_irq_ack(struct irq_data *data)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
base = tegra186_gpio_get_base(gpio, data->hwirq);
@@ -248,7 +251,8 @@ static void tegra186_irq_ack(struct irq_
static void tegra186_irq_mask(struct irq_data *data)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
u32 value;
@@ -263,7 +267,8 @@ static void tegra186_irq_mask(struct irq
static void tegra186_irq_unmask(struct irq_data *data)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
u32 value;
@@ -278,7 +283,8 @@ static void tegra186_irq_unmask(struct i
static int tegra186_irq_set_type(struct irq_data *data, unsigned int type)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
u32 value;
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 51/53] Revert "drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR"
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 50/53] gpio: tegra186: Fix chip_data type confusion Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 52/53] memblock: use kfree() to release kmalloced memblock regions Greg Kroah-Hartman
` (8 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Ben Skeggs, Lyude Paul, Karol Herbst
From: Karol Herbst <kherbst@redhat.com>
This reverts commit c9ec3d85c0eef7c71cdc68db758e0f0e378132c0.
This commit causes a regression if 4cdd2450bf739bada353e82d27b00db9af8c3001
is not applied as well. This was fixed for 5.16, 5.15 and 5.10.
On older stable branches backporting this commit is complicated as relevant
code changed quite a bit. Furthermore most of the affected hardware barely
works on those and users would want to use the newer kernels anyway.
Cc: stable@vger.kernel.org # 5.4 4.19 and 4.14
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/149
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 ++++++++++---------------
1 file changed, 16 insertions(+), 21 deletions(-)
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
@@ -88,13 +88,20 @@ nvkm_pmu_fini(struct nvkm_subdev *subdev
return 0;
}
-static void
+static int
nvkm_pmu_reset(struct nvkm_pmu *pmu)
{
struct nvkm_device *device = pmu->subdev.device;
if (!pmu->func->enabled(pmu))
- return;
+ return 0;
+
+ /* Inhibit interrupts, and wait for idle. */
+ nvkm_wr32(device, 0x10a014, 0x0000ffff);
+ nvkm_msec(device, 2000,
+ if (!nvkm_rd32(device, 0x10a04c))
+ break;
+ );
/* Reset. */
if (pmu->func->reset)
@@ -105,37 +112,25 @@ nvkm_pmu_reset(struct nvkm_pmu *pmu)
if (!(nvkm_rd32(device, 0x10a10c) & 0x00000006))
break;
);
+
+ return 0;
}
static int
nvkm_pmu_preinit(struct nvkm_subdev *subdev)
{
struct nvkm_pmu *pmu = nvkm_pmu(subdev);
- nvkm_pmu_reset(pmu);
- return 0;
+ return nvkm_pmu_reset(pmu);
}
static int
nvkm_pmu_init(struct nvkm_subdev *subdev)
{
struct nvkm_pmu *pmu = nvkm_pmu(subdev);
- struct nvkm_device *device = pmu->subdev.device;
-
- if (!pmu->func->init)
- return 0;
-
- if (pmu->func->enabled(pmu)) {
- /* Inhibit interrupts, and wait for idle. */
- nvkm_wr32(device, 0x10a014, 0x0000ffff);
- nvkm_msec(device, 2000,
- if (!nvkm_rd32(device, 0x10a04c))
- break;
- );
-
- nvkm_pmu_reset(pmu);
- }
-
- return pmu->func->init(pmu);
+ int ret = nvkm_pmu_reset(pmu);
+ if (ret == 0 && pmu->func->init)
+ ret = pmu->func->init(pmu);
+ return ret;
}
static int
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 52/53] memblock: use kfree() to release kmalloced memblock regions
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 51/53] Revert "drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR" Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.4 53/53] fget: clarify and improve __fget_files() implementation Greg Kroah-Hartman
` (7 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Miaohe Lin, Mike Rapoport
From: Miaohe Lin <linmiaohe@huawei.com>
commit c94afc46cae7ad41b2ad6a99368147879f4b0e56 upstream.
memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions
indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Fixes: 3010f876500f ("mm: discard memblock data later")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memblock.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -348,14 +348,20 @@ void __init memblock_discard(void)
addr = __pa(memblock.reserved.regions);
size = PAGE_ALIGN(sizeof(struct memblock_region) *
memblock.reserved.max);
- __memblock_free_late(addr, size);
+ if (memblock_reserved_in_slab)
+ kfree(memblock.reserved.regions);
+ else
+ __memblock_free_late(addr, size);
}
if (memblock.memory.regions != memblock_memory_init_regions) {
addr = __pa(memblock.memory.regions);
size = PAGE_ALIGN(sizeof(struct memblock_region) *
memblock.memory.max);
- __memblock_free_late(addr, size);
+ if (memblock_memory_in_slab)
+ kfree(memblock.memory.regions);
+ else
+ __memblock_free_late(addr, size);
}
}
#endif
^ permalink raw reply [flat|nested] 61+ messages in thread* [PATCH 5.4 53/53] fget: clarify and improve __fget_files() implementation
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 52/53] memblock: use kfree() to release kmalloced memblock regions Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 21:42 ` [PATCH 5.4 00/53] 5.4.182-rc1 review Shuah Khan
` (6 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Carel Si,
Jann Horn, Miklos Szeredi, Linus Torvalds, Baokun Li
From: Linus Torvalds <torvalds@linux-foundation.org>
commit e386dfc56f837da66d00a078e5314bc8382fab83 upstream.
Commit 054aa8d439b9 ("fget: check that the fd still exists after getting
a ref to it") fixed a race with getting a reference to a file just as it
was being closed. It was a fairly minimal patch, and I didn't think
re-checking the file pointer lookup would be a measurable overhead,
since it was all right there and cached.
But I was wrong, as pointed out by the kernel test robot.
The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed
quite noticeably. Admittedly it seems to be a very artificial test:
doing "poll()" system calls on regular files in a very tight loop in
multiple threads.
That means that basically all the time is spent just looking up file
descriptors without ever doing anything useful with them (not that doing
'poll()' on a regular file is useful to begin with). And as a result it
shows the extra "re-check fd" cost as a sore thumb.
Happily, the regression is fixable by just writing the code to loook up
the fd to be better and clearer. There's still a cost to verify the
file pointer, but now it's basically in the noise even for that
benchmark that does nothing else - and the code is more understandable
and has better comments too.
[ Side note: this patch is also a classic case of one that looks very
messy with the default greedy Myers diff - it's much more legible with
either the patience of histogram diff algorithm ]
Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/20211213083154.GA20853@linux.intel.com/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Carel Si <beibei.si@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/file.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++--------------
1 file changed, 57 insertions(+), 16 deletions(-)
--- a/fs/file.c
+++ b/fs/file.c
@@ -706,28 +706,69 @@ void do_close_on_exec(struct files_struc
spin_unlock(&files->file_lock);
}
-static struct file *__fget(unsigned int fd, fmode_t mask, unsigned int refs)
+static inline struct file *__fget_files_rcu(struct files_struct *files,
+ unsigned int fd, fmode_t mask, unsigned int refs)
{
- struct files_struct *files = current->files;
- struct file *file;
+ for (;;) {
+ struct file *file;
+ struct fdtable *fdt = rcu_dereference_raw(files->fdt);
+ struct file __rcu **fdentry;
- rcu_read_lock();
-loop:
- file = fcheck_files(files, fd);
- if (file) {
- /* File object ref couldn't be taken.
- * dup2() atomicity guarantee is the reason
- * we loop to catch the new file (or NULL pointer)
+ if (unlikely(fd >= fdt->max_fds))
+ return NULL;
+
+ fdentry = fdt->fd + array_index_nospec(fd, fdt->max_fds);
+ file = rcu_dereference_raw(*fdentry);
+ if (unlikely(!file))
+ return NULL;
+
+ if (unlikely(file->f_mode & mask))
+ return NULL;
+
+ /*
+ * Ok, we have a file pointer. However, because we do
+ * this all locklessly under RCU, we may be racing with
+ * that file being closed.
+ *
+ * Such a race can take two forms:
+ *
+ * (a) the file ref already went down to zero,
+ * and get_file_rcu_many() fails. Just try
+ * again:
*/
- if (file->f_mode & mask)
- file = NULL;
- else if (!get_file_rcu_many(file, refs))
- goto loop;
- else if (__fcheck_files(files, fd) != file) {
+ if (unlikely(!get_file_rcu_many(file, refs)))
+ continue;
+
+ /*
+ * (b) the file table entry has changed under us.
+ * Note that we don't need to re-check the 'fdt->fd'
+ * pointer having changed, because it always goes
+ * hand-in-hand with 'fdt'.
+ *
+ * If so, we need to put our refs and try again.
+ */
+ if (unlikely(rcu_dereference_raw(files->fdt) != fdt) ||
+ unlikely(rcu_dereference_raw(*fdentry) != file)) {
fput_many(file, refs);
- goto loop;
+ continue;
}
+
+ /*
+ * Ok, we have a ref to the file, and checked that it
+ * still exists.
+ */
+ return file;
}
+}
+
+
+static struct file *__fget(unsigned int fd, fmode_t mask, unsigned int refs)
+{
+ struct files_struct *files = current->files;
+ struct file *file;
+
+ rcu_read_lock();
+ file = __fget_files_rcu(files, fd, mask, refs);
rcu_read_unlock();
return file;
^ permalink raw reply [flat|nested] 61+ messages in thread* Re: [PATCH 5.4 00/53] 5.4.182-rc1 review
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.4 53/53] fget: clarify and improve __fget_files() implementation Greg Kroah-Hartman
@ 2022-02-28 21:42 ` Shuah Khan
2022-02-28 23:12 ` Florian Fainelli
` (5 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Shuah Khan @ 2022-02-28 21:42 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade,
Shuah Khan
On 2/28/22 10:23 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.182 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 61+ messages in thread* Re: [PATCH 5.4 00/53] 5.4.182-rc1 review
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2022-02-28 21:42 ` [PATCH 5.4 00/53] 5.4.182-rc1 review Shuah Khan
@ 2022-02-28 23:12 ` Florian Fainelli
2022-03-01 9:14 ` Jon Hunter
` (4 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Florian Fainelli @ 2022-02-28 23:12 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, sudipm.mukherjee, slade
On 2/28/2022 9:23 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.182 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTb using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 61+ messages in thread* Re: [PATCH 5.4 00/53] 5.4.182-rc1 review
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2022-02-28 23:12 ` Florian Fainelli
@ 2022-03-01 9:14 ` Jon Hunter
2022-03-01 11:34 ` Sudip Mukherjee
` (3 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Jon Hunter @ 2022-03-01 9:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, stable, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, slade, linux-tegra
On Mon, 28 Feb 2022 18:23:58 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.182 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.4:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
59 tests: 59 pass, 0 fail
Linux version: 5.4.182-rc1-gaa9d24e3c108
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 61+ messages in thread* Re: [PATCH 5.4 00/53] 5.4.182-rc1 review
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2022-03-01 9:14 ` Jon Hunter
@ 2022-03-01 11:34 ` Sudip Mukherjee
2022-03-01 16:45 ` Naresh Kamboju
` (2 subsequent siblings)
59 siblings, 0 replies; 61+ messages in thread
From: Sudip Mukherjee @ 2022-03-01 11:34 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, slade
Hi Greg,
On Mon, Feb 28, 2022 at 06:23:58PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.182 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20220213): 65 configs -> no failure
arm (gcc version 11.2.1 20220213): 107 configs -> no new failure
arm64 (gcc version 11.2.1 20220213): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20220213): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/820
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
--
Regards
Sudip
^ permalink raw reply [flat|nested] 61+ messages in thread* Re: [PATCH 5.4 00/53] 5.4.182-rc1 review
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2022-03-01 11:34 ` Sudip Mukherjee
@ 2022-03-01 16:45 ` Naresh Kamboju
2022-03-01 19:13 ` Guenter Roeck
2022-03-02 7:04 ` Slade Watkins
59 siblings, 0 replies; 61+ messages in thread
From: Naresh Kamboju @ 2022-03-01 16:45 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Mon, 28 Feb 2022 at 23:01, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.182 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 5.4.182-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: aa9d24e3c1088399a4cd2b031c4c6abee5d58a60
* git describe: v5.4.181-54-gaa9d24e3c108
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.181-54-gaa9d24e3c108
## Test Regressions (compared to v5.4.181)
No test regressions found.
## Metric Regressions (compared to v5.4.181)
No metric regressions found.
## Test Fixes (compared to v5.4.181)
No test fixes found.
## Metric Fixes (compared to v5.4.181)
No metric fixes found.
## Test result summary
total: 94463, pass: 80146, fail: 534, skip: 12639, xfail: 1144
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 290 total, 290 passed, 0 failed
* arm64: 41 total, 32 passed, 9 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 20 total, 20 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 49 passed, 11 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 40 total, 40 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 61+ messages in thread* Re: [PATCH 5.4 00/53] 5.4.182-rc1 review
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2022-03-01 16:45 ` Naresh Kamboju
@ 2022-03-01 19:13 ` Guenter Roeck
2022-03-02 7:04 ` Slade Watkins
59 siblings, 0 replies; 61+ messages in thread
From: Guenter Roeck @ 2022-03-01 19:13 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Mon, Feb 28, 2022 at 06:23:58PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.182 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 159 pass: 159 fail: 0
Qemu test results:
total: 449 pass: 449 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 61+ messages in thread* Re: [PATCH 5.4 00/53] 5.4.182-rc1 review
2022-02-28 17:23 [PATCH 5.4 00/53] 5.4.182-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2022-03-01 19:13 ` Guenter Roeck
@ 2022-03-02 7:04 ` Slade Watkins
59 siblings, 0 replies; 61+ messages in thread
From: Slade Watkins @ 2022-03-02 7:04 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, Linus Torvalds, Andrew Morton, Guenter Roeck, shuah,
patches, lkft-triage, Pavel Machek, Jon Hunter, Florian Fainelli,
Sudip Mukherjee
On Mon, Feb 28, 2022, at 12:23 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.182 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
5.4.182-rc1 compiled and booted with no errors or regressions on my x86_64 test system.
Tested-by: Slade Watkins <slade@sladewatkins.com>
Cheers,
Slade
^ permalink raw reply [flat|nested] 61+ messages in thread