* [PATCH 5.15 001/139] mm/filemap: Fix handling of THPs in generic_file_buffered_read()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
@ 2022-02-28 17:22 ` Greg Kroah-Hartman
2022-02-28 17:22 ` [PATCH 5.15 002/139] cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug Greg Kroah-Hartman
` (147 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:22 UTC (permalink / raw)
To: linux-kernel, stable@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, kirill.shutemov@linux.intel.com,
Song Liu
Cc: Greg Kroah-Hartman, stable, Vlastimil Babka,
Matthew Wilcox (Oracle),
Adam Majer, Dirk Mueller, Takashi Iwai
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
When a THP is present in the page cache, we can return it several times,
leading to userspace seeing the same data repeatedly if doing a read()
that crosses a 64-page boundary. This is probably not a security issue
(since the data all comes from the same file), but it can be interpreted
as a transient data corruption issue. Fortunately, it is very rare as
it can only occur when CONFIG_READ_ONLY_THP_FOR_FS is enabled, and it can
only happen to executables. We don't often call read() on executables.
This bug is fixed differently in v5.17 by commit 6b24ca4a1a8d
("mm: Use multi-index entries in the page cache"). That commit is
unsuitable for backporting, so fix this in the clearest way. It
sacrifices a little performance for clarity, but this should never
be a performance path in these kernel versions.
Fixes: cbd59c48ae2b ("mm/filemap: use head pages in generic_file_buffered_read")
Cc: stable@vger.kernel.org # v5.15, v5.16
Link: https://lore.kernel.org/r/df3b5d1c-a36b-2c73-3e27-99e74983de3a@suse.cz/
Analyzed-by: Adam Majer <amajer@suse.com>
Analyzed-by: Dirk Mueller <dmueller@suse.com>
Bisected-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/filemap.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2354,8 +2354,12 @@ static void filemap_get_read_batch(struc
break;
if (PageReadahead(head))
break;
- xas.xa_index = head->index + thp_nr_pages(head) - 1;
- xas.xa_offset = (xas.xa_index >> xas.xa_shift) & XA_CHUNK_MASK;
+ if (PageHead(head)) {
+ xas_set(&xas, head->index + thp_nr_pages(head));
+ /* Handle wrap correctly */
+ if (xas.xa_index - 1 >= max)
+ break;
+ }
continue;
put_page:
put_page(head);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 002/139] cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
2022-02-28 17:22 ` [PATCH 5.15 001/139] mm/filemap: Fix handling of THPs in generic_file_buffered_read() Greg Kroah-Hartman
@ 2022-02-28 17:22 ` Greg Kroah-Hartman
2022-02-28 17:22 ` [PATCH 5.15 003/139] cgroup-v1: Correct privileges check in release_agent writes Greg Kroah-Hartman
` (146 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhao Gongyi, Zhang Qiao, Waiman Long,
Michal Koutný,
Tejun Heo
From: Zhang Qiao <zhangqiao22@huawei.com>
commit 05c7b7a92cc87ff8d7fde189d0fade250697573c upstream.
As previously discussed(https://lkml.org/lkml/2022/1/20/51),
cpuset_attach() is affected with similar cpu hotplug race,
as follow scenario:
cpuset_attach() cpu hotplug
--------------------------- ----------------------
down_write(cpuset_rwsem)
guarantee_online_cpus() // (load cpus_attach)
sched_cpu_deactivate
set_cpu_active()
// will change cpu_active_mask
set_cpus_allowed_ptr(cpus_attach)
__set_cpus_allowed_ptr_locked()
// (if the intersection of cpus_attach and
cpu_active_mask is empty, will return -EINVAL)
up_write(cpuset_rwsem)
To avoid races such as described above, protect cpuset_attach() call
with cpu_hotplug_lock.
Fixes: be367d099270 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time")
Cc: stable@vger.kernel.org # v2.6.32+
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/cgroup/cpuset.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -2249,6 +2249,7 @@ static void cpuset_attach(struct cgroup_
cgroup_taskset_first(tset, &css);
cs = css_cs(css);
+ cpus_read_lock();
percpu_down_write(&cpuset_rwsem);
guarantee_online_mems(cs, &cpuset_attach_nodemask_to);
@@ -2302,6 +2303,7 @@ static void cpuset_attach(struct cgroup_
wake_up(&cpuset_attach_wq);
percpu_up_write(&cpuset_rwsem);
+ cpus_read_unlock();
}
/* The various types of files and directories in a cpuset file system */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 003/139] cgroup-v1: Correct privileges check in release_agent writes
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
2022-02-28 17:22 ` [PATCH 5.15 001/139] mm/filemap: Fix handling of THPs in generic_file_buffered_read() Greg Kroah-Hartman
2022-02-28 17:22 ` [PATCH 5.15 002/139] cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug Greg Kroah-Hartman
@ 2022-02-28 17:22 ` Greg Kroah-Hartman
2022-02-28 17:22 ` [PATCH 5.15 004/139] x86/ptrace: Fix xfpregs_set()s incorrect xmm clearing Greg Kroah-Hartman
` (145 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michal Koutný,
Masami Ichikawa(CIP),
Tejun Heo
From: Michal Koutný <mkoutny@suse.com>
commit 467a726b754f474936980da793b4ff2ec3e382a7 upstream.
The idea is to check: a) the owning user_ns of cgroup_ns, b)
capabilities in init_user_ns.
The commit 24f600856418 ("cgroup-v1: Require capabilities to set
release_agent") got this wrong in the write handler of release_agent
since it checked user_ns of the opener (may be different from the owning
user_ns of cgroup_ns).
Secondly, to avoid possibly confused deputy, the capability of the
opener must be checked.
Fixes: 24f600856418 ("cgroup-v1: Require capabilities to set release_agent")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/stable/20220216121142.GB30035@blackbody.suse.cz/
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Masami Ichikawa(CIP) <masami.ichikawa@cybertrust.co.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/cgroup/cgroup-v1.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -549,6 +549,7 @@ static ssize_t cgroup_release_agent_writ
char *buf, size_t nbytes, loff_t off)
{
struct cgroup *cgrp;
+ struct cgroup_file_ctx *ctx;
BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX);
@@ -556,8 +557,9 @@ static ssize_t cgroup_release_agent_writ
* Release agent gets called with all capabilities,
* require capabilities to set release agent.
*/
- if ((of->file->f_cred->user_ns != &init_user_ns) ||
- !capable(CAP_SYS_ADMIN))
+ ctx = of->priv;
+ if ((ctx->ns->user_ns != &init_user_ns) ||
+ !file_ns_capable(of->file, &init_user_ns, CAP_SYS_ADMIN))
return -EPERM;
cgrp = cgroup_kn_lock_live(of->kn, false);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 004/139] x86/ptrace: Fix xfpregs_set()s incorrect xmm clearing
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2022-02-28 17:22 ` [PATCH 5.15 003/139] cgroup-v1: Correct privileges check in release_agent writes Greg Kroah-Hartman
@ 2022-02-28 17:22 ` Greg Kroah-Hartman
2022-02-28 17:22 ` [PATCH 5.15 005/139] btrfs: tree-checker: check item_size for inode_item Greg Kroah-Hartman
` (144 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luís Ferreira, Andy Lutomirski,
Borislav Petkov
From: Andy Lutomirski <luto@kernel.org>
commit 44cad52cc14ae10062f142ec16ede489bccf4469 upstream.
xfpregs_set() handles 32-bit REGSET_XFP and 64-bit REGSET_FP. The actual
code treats these regsets as modern FX state (i.e. the beginning part of
XSTATE). The declarations of the regsets thought they were the legacy
i387 format. The code thought they were the 32-bit (no xmm8..15) variant
of XSTATE and, for good measure, made the high bits disappear by zeroing
the wrong part of the buffer. The latter broke ptrace, and everything
else confused anyone trying to understand the code. In particular, the
nonsense definitions of the regsets confused me when I wrote this code.
Clean this all up. Change the declarations to match reality (which
shouldn't change the generated code, let alone the ABI) and fix
xfpregs_set() to clear the correct bits and to only do so for 32-bit
callers.
Fixes: 6164331d15f7 ("x86/fpu: Rewrite xfpregs_set()")
Reported-by: Luís Ferreira <contact@lsferreira.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215524
Link: https://lore.kernel.org/r/YgpFnZpF01WwR8wU@zn.tnic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/fpu/regset.c | 9 ++++-----
arch/x86/kernel/ptrace.c | 4 ++--
2 files changed, 6 insertions(+), 7 deletions(-)
--- a/arch/x86/kernel/fpu/regset.c
+++ b/arch/x86/kernel/fpu/regset.c
@@ -87,11 +87,9 @@ int xfpregs_set(struct task_struct *targ
const void *kbuf, const void __user *ubuf)
{
struct fpu *fpu = &target->thread.fpu;
- struct user32_fxsr_struct newstate;
+ struct fxregs_state newstate;
int ret;
- BUILD_BUG_ON(sizeof(newstate) != sizeof(struct fxregs_state));
-
if (!cpu_feature_enabled(X86_FEATURE_FXSR))
return -ENODEV;
@@ -112,9 +110,10 @@ int xfpregs_set(struct task_struct *targ
/* Copy the state */
memcpy(&fpu->state.fxsave, &newstate, sizeof(newstate));
- /* Clear xmm8..15 */
+ /* Clear xmm8..15 for 32-bit callers */
BUILD_BUG_ON(sizeof(fpu->state.fxsave.xmm_space) != 16 * 16);
- memset(&fpu->state.fxsave.xmm_space[8], 0, 8 * 16);
+ if (in_ia32_syscall())
+ memset(&fpu->state.fxsave.xmm_space[8*4], 0, 8 * 16);
/* Mark FP and SSE as in use when XSAVE is enabled */
if (use_xsave())
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1224,7 +1224,7 @@ static struct user_regset x86_64_regsets
},
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_i387_struct) / sizeof(long),
+ .n = sizeof(struct fxregs_state) / sizeof(long),
.size = sizeof(long), .align = sizeof(long),
.active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set
},
@@ -1271,7 +1271,7 @@ static struct user_regset x86_32_regsets
},
[REGSET_XFP] = {
.core_note_type = NT_PRXFPREG,
- .n = sizeof(struct user32_fxsr_struct) / sizeof(u32),
+ .n = sizeof(struct fxregs_state) / sizeof(u32),
.size = sizeof(u32), .align = sizeof(u32),
.active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set
},
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 005/139] btrfs: tree-checker: check item_size for inode_item
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2022-02-28 17:22 ` [PATCH 5.15 004/139] x86/ptrace: Fix xfpregs_set()s incorrect xmm clearing Greg Kroah-Hartman
@ 2022-02-28 17:22 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 006/139] btrfs: tree-checker: check item_size for dev_item Greg Kroah-Hartman
` (143 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:22 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wenqing Liu, Su Yue, David Sterba
From: Su Yue <l@damenly.su>
commit 0c982944af27d131d3b74242f3528169f66950ad upstream.
while mounting the crafted image, out-of-bounds access happens:
[350.429619] UBSAN: array-index-out-of-bounds in fs/btrfs/struct-funcs.c:161:1
[350.429636] index 1048096 is out of range for type 'page *[16]'
[350.429650] CPU: 0 PID: 9 Comm: kworker/u8:1 Not tainted 5.16.0-rc4 #1
[350.429652] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[350.429653] Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs]
[350.429772] Call Trace:
[350.429774] <TASK>
[350.429776] dump_stack_lvl+0x47/0x5c
[350.429780] ubsan_epilogue+0x5/0x50
[350.429786] __ubsan_handle_out_of_bounds+0x66/0x70
[350.429791] btrfs_get_16+0xfd/0x120 [btrfs]
[350.429832] check_leaf+0x754/0x1a40 [btrfs]
[350.429874] ? filemap_read+0x34a/0x390
[350.429878] ? load_balance+0x175/0xfc0
[350.429881] validate_extent_buffer+0x244/0x310 [btrfs]
[350.429911] btrfs_validate_metadata_buffer+0xf8/0x100 [btrfs]
[350.429935] end_bio_extent_readpage+0x3af/0x850 [btrfs]
[350.429969] ? newidle_balance+0x259/0x480
[350.429972] end_workqueue_fn+0x29/0x40 [btrfs]
[350.429995] btrfs_work_helper+0x71/0x330 [btrfs]
[350.430030] ? __schedule+0x2fb/0xa40
[350.430033] process_one_work+0x1f6/0x400
[350.430035] ? process_one_work+0x400/0x400
[350.430036] worker_thread+0x2d/0x3d0
[350.430037] ? process_one_work+0x400/0x400
[350.430038] kthread+0x165/0x190
[350.430041] ? set_kthread_struct+0x40/0x40
[350.430043] ret_from_fork+0x1f/0x30
[350.430047] </TASK>
[350.430077] BTRFS warning (device loop0): bad eb member start: ptr 0xffe20f4e start 20975616 member offset 4293005178 size 2
check_leaf() is checking the leaf:
corrupt leaf: root=4 block=29396992 slot=1, bad key order, prev (16140901064495857664 1 0) current (1 204 12582912)
leaf 29396992 items 6 free space 3565 generation 6 owner DEV_TREE
leaf 29396992 flags 0x1(WRITTEN) backref revision 1
fs uuid a62e00e8-e94e-4200-8217-12444de93c2e
chunk uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8
item 0 key (16140901064495857664 INODE_ITEM 0) itemoff 3955 itemsize 40
generation 0 transid 0 size 0 nbytes 17592186044416
block group 0 mode 52667 links 33 uid 0 gid 2104132511 rdev 94223634821136
sequence 100305 flags 0x2409000(none)
atime 0.0 (1970-01-01 08:00:00)
ctime 2973280098083405823.4294967295 (-269783007-01-01 21:37:03)
mtime 18446744071572723616.4026825121 (1902-04-16 12:40:00)
otime 9249929404488876031.4294967295 (622322949-04-16 04:25:58)
item 1 key (1 DEV_EXTENT 12582912) itemoff 3907 itemsize 48
dev extent chunk_tree 3
chunk_objectid 256 chunk_offset 12582912 length 8388608
chunk_tree_uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8
The corrupted leaf of device tree has an inode item. The leaf passed
checksum and others checks in validate_extent_buffer until check_leaf_item().
Because of the key type BTRFS_INODE_ITEM, check_inode_item() is called even we
are in the device tree. Since the
item offset + sizeof(struct btrfs_inode_item) > eb->len, out-of-bounds access
is triggered.
The item end vs leaf boundary check has been done before
check_leaf_item(), so fix it by checking item size in check_inode_item()
before access of the inode item in extent buffer.
Other check functions except check_dev_item() in check_leaf_item()
have their item size checks.
The commit for check_dev_item() is followed.
No regression observed during running fstests.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215299
CC: stable@vger.kernel.org # 5.10+
CC: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/tree-checker.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -1007,6 +1007,7 @@ static int check_inode_item(struct exten
struct btrfs_inode_item *iitem;
u64 super_gen = btrfs_super_generation(fs_info->super_copy);
u32 valid_mask = (S_IFMT | S_ISUID | S_ISGID | S_ISVTX | 0777);
+ const u32 item_size = btrfs_item_size_nr(leaf, slot);
u32 mode;
int ret;
u32 flags;
@@ -1016,6 +1017,12 @@ static int check_inode_item(struct exten
if (unlikely(ret < 0))
return ret;
+ if (unlikely(item_size != sizeof(*iitem))) {
+ generic_err(leaf, slot, "invalid item size: has %u expect %zu",
+ item_size, sizeof(*iitem));
+ return -EUCLEAN;
+ }
+
iitem = btrfs_item_ptr(leaf, slot, struct btrfs_inode_item);
/* Here we use super block generation + 1 to handle log tree */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 006/139] btrfs: tree-checker: check item_size for dev_item
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2022-02-28 17:22 ` [PATCH 5.15 005/139] btrfs: tree-checker: check item_size for inode_item Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 007/139] clk: jz4725b: fix mmc0 clock gating Greg Kroah-Hartman
` (142 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Su Yue, David Sterba
From: Su Yue <l@damenly.su>
commit ea1d1ca4025ac6c075709f549f9aa036b5b6597d upstream.
Check item size before accessing the device item to avoid out of bound
access, similar to inode_item check.
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/tree-checker.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -965,6 +965,7 @@ static int check_dev_item(struct extent_
struct btrfs_key *key, int slot)
{
struct btrfs_dev_item *ditem;
+ const u32 item_size = btrfs_item_size_nr(leaf, slot);
if (unlikely(key->objectid != BTRFS_DEV_ITEMS_OBJECTID)) {
dev_item_err(leaf, slot,
@@ -972,6 +973,13 @@ static int check_dev_item(struct extent_
key->objectid, BTRFS_DEV_ITEMS_OBJECTID);
return -EUCLEAN;
}
+
+ if (unlikely(item_size != sizeof(*ditem))) {
+ dev_item_err(leaf, slot, "invalid item size: has %u expect %zu",
+ item_size, sizeof(*ditem));
+ return -EUCLEAN;
+ }
+
ditem = btrfs_item_ptr(leaf, slot, struct btrfs_dev_item);
if (unlikely(btrfs_device_id(leaf, ditem) != key->offset)) {
dev_item_err(leaf, slot,
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 007/139] clk: jz4725b: fix mmc0 clock gating
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 006/139] btrfs: tree-checker: check item_size for dev_item Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 008/139] io_uring: dont convert to jiffies for waiting on timeouts Greg Kroah-Hartman
` (141 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Siarhei Volkau, Paul Cercueil, Stephen Boyd
From: Siarhei Volkau <lis8215@gmail.com>
commit 2f0754f27a230fee6e6d753f07585cee03bedfe3 upstream.
The mmc0 clock gate bit was mistakenly assigned to "i2s" clock.
You can find that the same bit is assigned to "mmc0" too.
It leads to mmc0 hang for a long time after any sound activity
also it prevented PM_SLEEP to work properly.
I guess it was introduced by copy-paste from jz4740 driver
where it is really controls I2S clock gate.
Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver")
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clk/ingenic/jz4725b-cgu.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -139,11 +139,10 @@ static const struct ingenic_cgu_clk_info
},
[JZ4725B_CLK_I2S] = {
- "i2s", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ "i2s", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4725B_CLK_EXT, JZ4725B_CLK_PLL_HALF, -1, -1 },
.mux = { CGU_REG_CPCCR, 31, 1 },
.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
- .gate = { CGU_REG_CLKGR, 6 },
},
[JZ4725B_CLK_SPI] = {
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 008/139] io_uring: dont convert to jiffies for waiting on timeouts
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 007/139] clk: jz4725b: fix mmc0 clock gating Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 009/139] io_uring: disallow modification of rsrc_data during quiesce Greg Kroah-Hartman
` (140 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Bob Chen, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit 228339662b398a59b3560cd571deb8b25b253c7e upstream.
If an application calls io_uring_enter(2) with a timespec passed in,
convert that timespec to ktime_t rather than jiffies. The latter does
not provide the granularity the application may expect, and may in
fact provided different granularity on different systems, depending
on what the HZ value is configured at.
Turn the timespec into an absolute ktime_t, and use that with
schedule_hrtimeout() instead.
Link: https://github.com/axboe/liburing/issues/531
Cc: stable@vger.kernel.org
Reported-by: Bob Chen <chenbo.chen@alibaba-inc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/io_uring.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -7590,7 +7590,7 @@ static int io_run_task_work_sig(void)
/* when returns >0, the caller should retry */
static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,
struct io_wait_queue *iowq,
- signed long *timeout)
+ ktime_t timeout)
{
int ret;
@@ -7602,8 +7602,9 @@ static inline int io_cqring_wait_schedul
if (test_bit(0, &ctx->check_cq_overflow))
return 1;
- *timeout = schedule_timeout(*timeout);
- return !*timeout ? -ETIME : 1;
+ if (!schedule_hrtimeout(&timeout, HRTIMER_MODE_ABS))
+ return -ETIME;
+ return 1;
}
/*
@@ -7616,7 +7617,7 @@ static int io_cqring_wait(struct io_ring
{
struct io_wait_queue iowq;
struct io_rings *rings = ctx->rings;
- signed long timeout = MAX_SCHEDULE_TIMEOUT;
+ ktime_t timeout = KTIME_MAX;
int ret;
do {
@@ -7632,7 +7633,7 @@ static int io_cqring_wait(struct io_ring
if (get_timespec64(&ts, uts))
return -EFAULT;
- timeout = timespec64_to_jiffies(&ts);
+ timeout = ktime_add_ns(timespec64_to_ktime(ts), ktime_get_ns());
}
if (sig) {
@@ -7664,7 +7665,7 @@ static int io_cqring_wait(struct io_ring
}
prepare_to_wait_exclusive(&ctx->cq_wait, &iowq.wq,
TASK_INTERRUPTIBLE);
- ret = io_cqring_wait_schedule(ctx, &iowq, &timeout);
+ ret = io_cqring_wait_schedule(ctx, &iowq, timeout);
finish_wait(&ctx->cq_wait, &iowq.wq);
cond_resched();
} while (ret > 0);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 009/139] io_uring: disallow modification of rsrc_data during quiesce
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 008/139] io_uring: dont convert to jiffies for waiting on timeouts Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 010/139] selinux: fix misuse of mutex_is_locked() Greg Kroah-Hartman
` (139 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+ca8bf833622a1662745b,
Dylan Yudaken, Jens Axboe
From: Dylan Yudaken <dylany@fb.com>
commit 80912cef18f16f8fe59d1fb9548d4364342be360 upstream.
io_rsrc_ref_quiesce will unlock the uring while it waits for references to
the io_rsrc_data to be killed.
There are other places to the data that might add references to data via
calls to io_rsrc_node_switch.
There is a race condition where this reference can be added after the
completion has been signalled. At this point the io_rsrc_ref_quiesce call
will wake up and relock the uring, assuming the data is unused and can be
freed - although it is actually being used.
To fix this check in io_rsrc_ref_quiesce if a resource has been revived.
Reported-by: syzbot+ca8bf833622a1662745b@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220222161751.995746-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/io_uring.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -7818,7 +7818,15 @@ static int io_rsrc_ref_quiesce(struct io
ret = wait_for_completion_interruptible(&data->done);
if (!ret) {
mutex_lock(&ctx->uring_lock);
- break;
+ if (atomic_read(&data->refs) > 0) {
+ /*
+ * it has been revived by another thread while
+ * we were unlocked
+ */
+ mutex_unlock(&ctx->uring_lock);
+ } else {
+ break;
+ }
}
atomic_inc(&data->refs);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 010/139] selinux: fix misuse of mutex_is_locked()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 009/139] io_uring: disallow modification of rsrc_data during quiesce Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 011/139] vhost/vsock: dont check owner in vhost_vsock_stop() while releasing Greg Kroah-Hartman
` (138 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ondrej Mosnacek, Paul Moore
From: Ondrej Mosnacek <omosnace@redhat.com>
commit ce2fc710c9d2b25afc710f49bb2065b4439a62bc upstream.
mutex_is_locked() tests whether the mutex is locked *by any task*, while
here we want to test if it is held *by the current task*. To avoid
false/missed WARNINGs, use lockdep_assert_is_held() and
lockdep_assert_is_not_held() instead, which do the right thing (though
they are a no-op if CONFIG_LOCKDEP=n).
Cc: stable@vger.kernel.org
Fixes: 2554a48f4437 ("selinux: measure state and policy capabilities")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
security/selinux/ima.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/security/selinux/ima.c
+++ b/security/selinux/ima.c
@@ -77,7 +77,7 @@ void selinux_ima_measure_state_locked(st
size_t policy_len;
int rc = 0;
- WARN_ON(!mutex_is_locked(&state->policy_mutex));
+ lockdep_assert_held(&state->policy_mutex);
state_str = selinux_ima_collect_state(state);
if (!state_str) {
@@ -117,7 +117,7 @@ void selinux_ima_measure_state_locked(st
*/
void selinux_ima_measure_state(struct selinux_state *state)
{
- WARN_ON(mutex_is_locked(&state->policy_mutex));
+ lockdep_assert_not_held(&state->policy_mutex);
mutex_lock(&state->policy_mutex);
selinux_ima_measure_state_locked(state);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 011/139] vhost/vsock: dont check owner in vhost_vsock_stop() while releasing
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 010/139] selinux: fix misuse of mutex_is_locked() Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 012/139] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel Greg Kroah-Hartman
` (137 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+1e3ea63db39f2b4440e0,
Stefano Garzarella, Jason Wang, David S. Miller,
syzbot+3140b17cb44a7b174008
From: Stefano Garzarella <sgarzare@redhat.com>
commit a58da53ffd70294ebea8ecd0eb45fd0d74add9f9 upstream.
vhost_vsock_stop() calls vhost_dev_check_owner() to check the device
ownership. It expects current->mm to be valid.
vhost_vsock_stop() is also called by vhost_vsock_dev_release() when
the user has not done close(), so when we are in do_exit(). In this
case current->mm is invalid and we're releasing the device, so we
should clean it anyway.
Let's check the owner only when vhost_vsock_stop() is called
by an ioctl.
When invoked from release we can not fail so we don't check return
code of vhost_vsock_stop(). We need to stop vsock even if it's not
the owner.
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Cc: stable@vger.kernel.org
Reported-by: syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/vhost/vsock.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -633,16 +633,18 @@ err:
return ret;
}
-static int vhost_vsock_stop(struct vhost_vsock *vsock)
+static int vhost_vsock_stop(struct vhost_vsock *vsock, bool check_owner)
{
size_t i;
- int ret;
+ int ret = 0;
mutex_lock(&vsock->dev.mutex);
- ret = vhost_dev_check_owner(&vsock->dev);
- if (ret)
- goto err;
+ if (check_owner) {
+ ret = vhost_dev_check_owner(&vsock->dev);
+ if (ret)
+ goto err;
+ }
for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) {
struct vhost_virtqueue *vq = &vsock->vqs[i];
@@ -757,7 +759,12 @@ static int vhost_vsock_dev_release(struc
* inefficient. Room for improvement here. */
vsock_for_each_connected_socket(vhost_vsock_reset_orphans);
- vhost_vsock_stop(vsock);
+ /* Don't check the owner, because we are in the release path, so we
+ * need to stop the vsock device in any case.
+ * vhost_vsock_stop() can not fail in this case, so we don't need to
+ * check the return code.
+ */
+ vhost_vsock_stop(vsock, false);
vhost_vsock_flush(vsock);
vhost_dev_stop(&vsock->dev);
@@ -872,7 +879,7 @@ static long vhost_vsock_dev_ioctl(struct
if (start)
return vhost_vsock_start(vsock);
else
- return vhost_vsock_stop(vsock);
+ return vhost_vsock_stop(vsock, true);
case VHOST_GET_FEATURES:
features = VHOST_VSOCK_FEATURES;
if (copy_to_user(argp, &features, sizeof(features)))
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 012/139] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 011/139] vhost/vsock: dont check owner in vhost_vsock_stop() while releasing Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 013/139] parisc/unaligned: Fix ldw() and stw() unalignment handlers Greg Kroah-Hartman
` (136 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Helge Deller
From: Helge Deller <deller@gmx.de>
commit dd2288f4a020d693360e3e8d72f8b9d9c25f5ef6 upstream.
Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/kernel/unaligned.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -397,7 +397,7 @@ static int emulate_std(struct pt_regs *r
__asm__ __volatile__ (
" mtsp %4, %%sr1\n"
" zdep %2, 29, 2, %%r19\n"
-" dep %%r0, 31, 2, %2\n"
+" dep %%r0, 31, 2, %3\n"
" mtsar %%r19\n"
" zvdepi -2, 32, %%r19\n"
"1: ldw 0(%%sr1,%3),%%r20\n"
@@ -409,7 +409,7 @@ static int emulate_std(struct pt_regs *r
" andcm %%r21, %%r19, %%r21\n"
" or %1, %%r20, %1\n"
" or %2, %%r21, %2\n"
-"3: stw %1,0(%%sr1,%1)\n"
+"3: stw %1,0(%%sr1,%3)\n"
"4: stw %%r1,4(%%sr1,%3)\n"
"5: stw %2,8(%%sr1,%3)\n"
" copy %%r0, %0\n"
@@ -596,7 +596,6 @@ void handle_unaligned(struct pt_regs *re
ret = ERR_NOTHANDLED; /* "undefined", but lets kill them. */
break;
}
-#ifdef CONFIG_PA20
switch (regs->iir & OPCODE2_MASK)
{
case OPCODE_FLDD_L:
@@ -607,14 +606,15 @@ void handle_unaligned(struct pt_regs *re
flop=1;
ret = emulate_std(regs, R2(regs->iir),1);
break;
+#ifdef CONFIG_PA20
case OPCODE_LDD_L:
ret = emulate_ldd(regs, R2(regs->iir),0);
break;
case OPCODE_STD_L:
ret = emulate_std(regs, R2(regs->iir),0);
break;
- }
#endif
+ }
switch (regs->iir & OPCODE3_MASK)
{
case OPCODE_FLDW_L:
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 013/139] parisc/unaligned: Fix ldw() and stw() unalignment handlers
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 012/139] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 014/139] KVM: x86/mmu: make apf token non-zero to fix bug Greg Kroah-Hartman
` (135 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Helge Deller
From: Helge Deller <deller@gmx.de>
commit a97279836867b1cb50a3d4f0b1bf60e0abe6d46c upstream.
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/kernel/unaligned.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -340,7 +340,7 @@ static int emulate_stw(struct pt_regs *r
: "r" (val), "r" (regs->ior), "r" (regs->isr)
: "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER );
- return 0;
+ return ret;
}
static int emulate_std(struct pt_regs *regs, int frreg, int flop)
{
@@ -619,10 +619,10 @@ void handle_unaligned(struct pt_regs *re
{
case OPCODE_FLDW_L:
flop=1;
- ret = emulate_ldw(regs, R2(regs->iir),0);
+ ret = emulate_ldw(regs, R2(regs->iir), 1);
break;
case OPCODE_LDW_M:
- ret = emulate_ldw(regs, R2(regs->iir),1);
+ ret = emulate_ldw(regs, R2(regs->iir), 0);
break;
case OPCODE_FSTW_L:
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 014/139] KVM: x86/mmu: make apf token non-zero to fix bug
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 013/139] parisc/unaligned: Fix ldw() and stw() unalignment handlers Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 015/139] drm/amd/display: Protect update_bw_bounding_box FPU code Greg Kroah-Hartman
` (134 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Liang Zhang, Paolo Bonzini
From: Liang Zhang <zhangliang5@huawei.com>
commit 6f3c1fc53d86d580d8d6d749c4af23705e4f6f79 upstream.
In current async pagefault logic, when a page is ready, KVM relies on
kvm_arch_can_dequeue_async_page_present() to determine whether to deliver
a READY event to the Guest. This function test token value of struct
kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a
READY event is finished by Guest. If value is zero meaning that a READY
event is done, so the KVM can deliver another.
But the kvm_arch_setup_async_pf() may produce a valid token with zero
value, which is confused with previous mention and may lead the loss of
this READY event.
This bug may cause task blocked forever in Guest:
INFO: task stress:7532 blocked for more than 1254 seconds.
Not tainted 5.10.0 #16
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress state:D stack: 0 pid: 7532 ppid: 1409
flags:0x00000080
Call Trace:
__schedule+0x1e7/0x650
schedule+0x46/0xb0
kvm_async_pf_task_wait_schedule+0xad/0xe0
? exit_to_user_mode_prepare+0x60/0x70
__kvm_handle_async_pf+0x4f/0xb0
? asm_exc_page_fault+0x8/0x30
exc_page_fault+0x6f/0x110
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x402d00
RSP: 002b:00007ffd31912500 EFLAGS: 00010206
RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0
RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0
RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086
R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000
R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000
Signed-off-by: Liang Zhang <zhangliang5@huawei.com>
Message-Id: <20220222031239.1076682-1-zhangliang5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/mmu/mmu.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3889,12 +3889,23 @@ static void shadow_page_table_clear_floo
walk_shadow_page_lockless_end(vcpu);
}
+static u32 alloc_apf_token(struct kvm_vcpu *vcpu)
+{
+ /* make sure the token value is not 0 */
+ u32 id = vcpu->arch.apf.id;
+
+ if (id << 12 == 0)
+ vcpu->arch.apf.id = 1;
+
+ return (vcpu->arch.apf.id++ << 12) | vcpu->vcpu_id;
+}
+
static bool kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
gfn_t gfn)
{
struct kvm_arch_async_pf arch;
- arch.token = (vcpu->arch.apf.id++ << 12) | vcpu->vcpu_id;
+ arch.token = alloc_apf_token(vcpu);
arch.gfn = gfn;
arch.direct_map = vcpu->arch.mmu->direct_map;
arch.cr3 = vcpu->arch.mmu->get_guest_pgd(vcpu);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 015/139] drm/amd/display: Protect update_bw_bounding_box FPU code.
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 014/139] KVM: x86/mmu: make apf token non-zero to fix bug Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 016/139] drm/amd/pm: fix some OEM SKU specific stability issues Greg Kroah-Hartman
` (133 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Bas Nieuwenhuizen, Alex Deucher
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
commit 1432108d00e42ffa383240bcac8d58f89ae19104 upstream.
For DCN3/3.01/3.02 at least these use the fpu.
v2: squash in build fix for when DCN is not enabled (Leo)
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c | 2 ++
drivers/gpu/drm/amd/display/dc/core/dc.c | 7 +++++--
2 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c
@@ -437,8 +437,10 @@ static void dcn3_get_memclk_states_from_
clk_mgr_base->bw_params->clk_table.num_entries = num_levels ? num_levels : 1;
/* Refresh bounding box */
+ DC_FP_START();
clk_mgr_base->ctx->dc->res_pool->funcs->update_bw_bounding_box(
clk_mgr->base.ctx->dc, clk_mgr_base->bw_params);
+ DC_FP_END();
}
static bool dcn3_is_smu_present(struct clk_mgr *clk_mgr_base)
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -891,10 +891,13 @@ static bool dc_construct(struct dc *dc,
goto fail;
#ifdef CONFIG_DRM_AMD_DC_DCN
dc->clk_mgr->force_smu_not_present = init_params->force_smu_not_present;
-#endif
- if (dc->res_pool->funcs->update_bw_bounding_box)
+ if (dc->res_pool->funcs->update_bw_bounding_box) {
+ DC_FP_START();
dc->res_pool->funcs->update_bw_bounding_box(dc, dc->clk_mgr->bw_params);
+ DC_FP_END();
+ }
+#endif
/* Creation of current_state must occur after dc->dml
* is initialized in dc_create_resource_pool because
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 016/139] drm/amd/pm: fix some OEM SKU specific stability issues
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 015/139] drm/amd/display: Protect update_bw_bounding_box FPU code Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 017/139] drm/amd: Check if ASPM is enabled from PCIe subsystem Greg Kroah-Hartman
` (132 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Evan Quan, Alex Deucher
From: Evan Quan <evan.quan@amd.com>
commit e3f3824874da78db5775a5cb9c0970cd1c6978bc upstream.
Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU
specific stability issues.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 32 +++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c
@@ -418,6 +418,36 @@ static int sienna_cichlid_store_powerpla
return 0;
}
+static int sienna_cichlid_patch_pptable_quirk(struct smu_context *smu)
+{
+ struct amdgpu_device *adev = smu->adev;
+ uint32_t *board_reserved;
+ uint16_t *freq_table_gfx;
+ uint32_t i;
+
+ /* Fix some OEM SKU specific stability issues */
+ GET_PPTABLE_MEMBER(BoardReserved, &board_reserved);
+ if ((adev->pdev->device == 0x73DF) &&
+ (adev->pdev->revision == 0XC3) &&
+ (adev->pdev->subsystem_device == 0x16C2) &&
+ (adev->pdev->subsystem_vendor == 0x1043))
+ board_reserved[0] = 1387;
+
+ GET_PPTABLE_MEMBER(FreqTableGfx, &freq_table_gfx);
+ if ((adev->pdev->device == 0x73DF) &&
+ (adev->pdev->revision == 0XC3) &&
+ ((adev->pdev->subsystem_device == 0x16C2) ||
+ (adev->pdev->subsystem_device == 0x133C)) &&
+ (adev->pdev->subsystem_vendor == 0x1043)) {
+ for (i = 0; i < NUM_GFXCLK_DPM_LEVELS; i++) {
+ if (freq_table_gfx[i] > 2500)
+ freq_table_gfx[i] = 2500;
+ }
+ }
+
+ return 0;
+}
+
static int sienna_cichlid_setup_pptable(struct smu_context *smu)
{
int ret = 0;
@@ -438,7 +468,7 @@ static int sienna_cichlid_setup_pptable(
if (ret)
return ret;
- return ret;
+ return sienna_cichlid_patch_pptable_quirk(smu);
}
static int sienna_cichlid_tables_init(struct smu_context *smu)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 017/139] drm/amd: Check if ASPM is enabled from PCIe subsystem
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 016/139] drm/amd/pm: fix some OEM SKU specific stability issues Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 018/139] drm/amdgpu: disable MMHUB PG for Picasso Greg Kroah-Hartman
` (131 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, koba.ko, Alex Deucher, Mario Limonciello
From: Mario Limonciello <mario.limonciello@amd.com>
commit 7294863a6f01248d72b61d38478978d638641bee upstream.
commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM
by default but a variety of hardware configurations it turns out that this
caused a regression.
* PPC64LE hardware does not support ASPM at a hardware level.
CONFIG_PCIEASPM is often disabled on these architectures.
* Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem
disables it
Check with the PCIe subsystem to see that ASPM has been enabled
or not.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907
Tested-by: koba.ko@canonical.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -1278,6 +1278,9 @@ static int amdgpu_pci_probe(struct pci_d
bool is_fw_fb;
resource_size_t base, size;
+ if (amdgpu_aspm == -1 && !pcie_aspm_enabled(pdev))
+ amdgpu_aspm = 0;
+
if (amdgpu_virtual_display ||
amdgpu_device_asic_has_dc_support(flags & AMD_ASIC_MASK))
supports_atomic = true;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 018/139] drm/amdgpu: disable MMHUB PG for Picasso
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 017/139] drm/amd: Check if ASPM is enabled from PCIe subsystem Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 019/139] drm/amdgpu: do not enable asic reset for raven2 Greg Kroah-Hartman
` (130 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Evan Quan, Alex Deucher
From: Evan Quan <evan.quan@amd.com>
commit f626dd0ff05043e5a7154770cc7cda66acee33a3 upstream.
MMHUB PG needs to be disabled for Picasso for stability reasons.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/soc15.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -1273,8 +1273,11 @@ static int soc15_common_early_init(void
AMD_CG_SUPPORT_SDMA_LS |
AMD_CG_SUPPORT_VCN_MGCG;
+ /*
+ * MMHUB PG needs to be disabled for Picasso for
+ * stability reasons.
+ */
adev->pg_flags = AMD_PG_SUPPORT_SDMA |
- AMD_PG_SUPPORT_MMHUB |
AMD_PG_SUPPORT_VCN;
} else {
adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG |
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 019/139] drm/amdgpu: do not enable asic reset for raven2
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 018/139] drm/amdgpu: disable MMHUB PG for Picasso Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 020/139] drm/amdgpu: check vm ready by amdgpu_vm->evicting flag Greg Kroah-Hartman
` (129 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chen Gong, Alex Deucher, Mario Limonciello
From: Chen Gong <curry.gong@amd.com>
commit 1e2be869c8a7247a7253ef4f461f85e2f5931b95 upstream.
The GPU reset function of raven2 is not maintained or tested, so it should be
very unstable.
Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which
causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored
here.
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Chen Gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/soc15.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -607,8 +607,8 @@ soc15_asic_reset_method(struct amdgpu_de
static int soc15_asic_reset(struct amdgpu_device *adev)
{
/* original raven doesn't have full asic reset */
- if ((adev->apu_flags & AMD_APU_IS_RAVEN) &&
- !(adev->apu_flags & AMD_APU_IS_RAVEN2))
+ if ((adev->apu_flags & AMD_APU_IS_RAVEN) ||
+ (adev->apu_flags & AMD_APU_IS_RAVEN2))
return 0;
switch (soc15_asic_reset_method(adev)) {
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 020/139] drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 019/139] drm/amdgpu: do not enable asic reset for raven2 Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 18:23 ` Deucher, Alexander
2022-02-28 17:23 ` [PATCH 5.15 021/139] drm/i915: Widen the QGV point mask Greg Kroah-Hartman
` (128 subsequent siblings)
148 siblings, 1 reply; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Menzel, Christian König,
Qiang Yu, Alex Deucher
From: Qiang Yu <qiang.yu@amd.com>
commit c1a66c3bc425ff93774fb2f6eefa67b83170dd7e upstream.
Workstation application ANSA/META v21.1.4 get this error dmesg when
running CI test suite provided by ANSA/META:
[drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16)
This is caused by:
1. create a 256MB buffer in invisible VRAM
2. CPU map the buffer and access it causes vm_fault and try to move
it to visible VRAM
3. force visible VRAM space and traverse all VRAM bos to check if
evicting this bo is valuable
4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable()
will set amdgpu_vm->evicting, but latter due to not in visible
VRAM, won't really evict it so not add it to amdgpu_vm->evicted
5. before next CS to clear the amdgpu_vm->evicting, user VM ops
ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted)
but fail in amdgpu_vm_bo_update_mapping() (check
amdgpu_vm->evicting) and get this error log
This error won't affect functionality as next CS will finish the
waiting VM ops. But we'd better clear the error log by checking
the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling
amdgpu_vm_bo_update_mapping() later.
Another reason is amdgpu_vm->evicted list holds all BOs (both
user buffer and page table), but only page table BOs' eviction
prevent VM ops. amdgpu_vm->evicting flag is set only for page
table BOs, so we should use evicting flag instead of evicted list
in amdgpu_vm_ready().
The side effect of this change is: previously blocked VM op (user
buffer in "evicted" list but no page table in it) gets done
immediately.
v2: update commit comments.
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -768,11 +768,16 @@ int amdgpu_vm_validate_pt_bos(struct amd
* Check if all VM PDs/PTs are ready for updates
*
* Returns:
- * True if eviction list is empty.
+ * True if VM is not evicting.
*/
bool amdgpu_vm_ready(struct amdgpu_vm *vm)
{
- return list_empty(&vm->evicted);
+ bool ret;
+
+ amdgpu_vm_eviction_lock(vm);
+ ret = !vm->evicting;
+ amdgpu_vm_eviction_unlock(vm);
+ return ret;
}
/**
^ permalink raw reply [flat|nested] 151+ messages in thread* RE: [PATCH 5.15 020/139] drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
2022-02-28 17:23 ` [PATCH 5.15 020/139] drm/amdgpu: check vm ready by amdgpu_vm->evicting flag Greg Kroah-Hartman
@ 2022-02-28 18:23 ` Deucher, Alexander
0 siblings, 0 replies; 151+ messages in thread
From: Deucher, Alexander @ 2022-02-28 18:23 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, Paul Menzel, Koenig, Christian, Yu, Qiang
[Public]
> -----Original Message-----
> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Sent: Monday, February 28, 2022 12:23 PM
> To: linux-kernel@vger.kernel.org
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>;
> stable@vger.kernel.org; Paul Menzel <pmenzel@molgen.mpg.de>; Koenig,
> Christian <Christian.Koenig@amd.com>; Yu, Qiang <Qiang.Yu@amd.com>;
> Deucher, Alexander <Alexander.Deucher@amd.com>
> Subject: [PATCH 5.15 020/139] drm/amdgpu: check vm ready by
> amdgpu_vm->evicting flag
>
> From: Qiang Yu <qiang.yu@amd.com>
>
> commit c1a66c3bc425ff93774fb2f6eefa67b83170dd7e upstream.
>
> Workstation application ANSA/META v21.1.4 get this error dmesg when
> running CI test suite provided by ANSA/META:
> [drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-
> 16)
>
> This is caused by:
> 1. create a 256MB buffer in invisible VRAM 2. CPU map the buffer and access
> it causes vm_fault and try to move
> it to visible VRAM
> 3. force visible VRAM space and traverse all VRAM bos to check if
> evicting this bo is valuable
> 4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable()
> will set amdgpu_vm->evicting, but latter due to not in visible
> VRAM, won't really evict it so not add it to amdgpu_vm->evicted 5. before
> next CS to clear the amdgpu_vm->evicting, user VM ops
> ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted)
> but fail in amdgpu_vm_bo_update_mapping() (check
> amdgpu_vm->evicting) and get this error log
>
> This error won't affect functionality as next CS will finish the waiting VM ops.
> But we'd better clear the error log by checking the amdgpu_vm->evicting flag
> in amdgpu_vm_ready() to stop calling
> amdgpu_vm_bo_update_mapping() later.
>
> Another reason is amdgpu_vm->evicted list holds all BOs (both user buffer
> and page table), but only page table BOs' eviction prevent VM ops.
> amdgpu_vm->evicting flag is set only for page table BOs, so we should use
> evicting flag instead of evicted list in amdgpu_vm_ready().
>
> The side effect of this change is: previously blocked VM op (user buffer in
> "evicted" list but no page table in it) gets done immediately.
>
> v2: update commit comments.
>
> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
> Reviewed-by: Christian König <christian.koenig@amd.com>
> Signed-off-by: Qiang Yu <qiang.yu@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A regression was reported against this patch in 5.17. Please drop for now.
Alex
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
> @@ -768,11 +768,16 @@ int amdgpu_vm_validate_pt_bos(struct amd
> * Check if all VM PDs/PTs are ready for updates
> *
> * Returns:
> - * True if eviction list is empty.
> + * True if VM is not evicting.
> */
> bool amdgpu_vm_ready(struct amdgpu_vm *vm) {
> - return list_empty(&vm->evicted);
> + bool ret;
> +
> + amdgpu_vm_eviction_lock(vm);
> + ret = !vm->evicting;
> + amdgpu_vm_eviction_unlock(vm);
> + return ret;
> }
>
> /**
>
^ permalink raw reply [flat|nested] 151+ messages in thread
* [PATCH 5.15 021/139] drm/i915: Widen the QGV point mask
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 020/139] drm/amdgpu: check vm ready by amdgpu_vm->evicting flag Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 022/139] drm/i915: Correctly populate use_sagv_wm for all pipes Greg Kroah-Hartman
` (127 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Lisovskiy,
Ville Syrjälä,
Tvrtko Ursulin
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
commit 3f33364836aacc28cd430d22cf22379e3b5ecd77 upstream.
adlp+ adds some extra bits to the QGV point mask. The code attempts
to handle that but forgot to actually make sure we can store those
bits in the bw state. Fix it.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214091811.13725-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit c0299cc9840b3805205173cc77782f317b78ea0e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/display/intel_bw.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_bw.h
@@ -30,19 +30,19 @@ struct intel_bw_state {
*/
u8 pipe_sagv_reject;
+ /* bitmask of active pipes */
+ u8 active_pipes;
+
/*
* Current QGV points mask, which restricts
* some particular SAGV states, not to confuse
* with pipe_sagv_mask.
*/
- u8 qgv_points_mask;
+ u16 qgv_points_mask;
unsigned int data_rate[I915_MAX_PIPES];
u8 num_active_planes[I915_MAX_PIPES];
- /* bitmask of active pipes */
- u8 active_pipes;
-
int min_cdclk;
};
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 022/139] drm/i915: Correctly populate use_sagv_wm for all pipes
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 021/139] drm/i915: Widen the QGV point mask Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 023/139] drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV Greg Kroah-Hartman
` (126 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Lisovskiy,
Ville Syrjälä,
Tvrtko Ursulin
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
commit afc189df6bcc6be65961deb54e15ec60e7f85337 upstream.
When changing between SAGV vs. no SAGV on tgl+ we have to
update the use_sagv_wm flag for all the crtcs or else
an active pipe not already in the state will end up using
the wrong watermarks. That is especially bad when we end up
with the tighter non-SAGV watermarks with SAGV enabled.
Usually ends up in underruns.
Cc: stable@vger.kernel.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 7241c57d3140 ("drm/i915: Add TGL+ SAGV support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-2-ville.syrjala@linux.intel.com
(cherry picked from commit 8dd8ffb824ca7b897ce9f2082ffa7e64831c22dc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/intel_pm.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4020,6 +4020,17 @@ static int intel_compute_sagv_mask(struc
return ret;
}
+ if (intel_can_enable_sagv(dev_priv, new_bw_state) !=
+ intel_can_enable_sagv(dev_priv, old_bw_state)) {
+ ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+ if (ret)
+ return ret;
+ } else if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) {
+ ret = intel_atomic_lock_global_state(&new_bw_state->base);
+ if (ret)
+ return ret;
+ }
+
for_each_new_intel_crtc_in_state(state, crtc,
new_crtc_state, i) {
struct skl_pipe_wm *pipe_wm = &new_crtc_state->wm.skl.optimal;
@@ -4035,17 +4046,6 @@ static int intel_compute_sagv_mask(struc
intel_can_enable_sagv(dev_priv, new_bw_state);
}
- if (intel_can_enable_sagv(dev_priv, new_bw_state) !=
- intel_can_enable_sagv(dev_priv, old_bw_state)) {
- ret = intel_atomic_serialize_global_state(&new_bw_state->base);
- if (ret)
- return ret;
- } else if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) {
- ret = intel_atomic_lock_global_state(&new_bw_state->base);
- if (ret)
- return ret;
- }
-
return 0;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 023/139] drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 022/139] drm/i915: Correctly populate use_sagv_wm for all pipes Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 024/139] sr9700: sanity check for packet length Greg Kroah-Hartman
` (125 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä,
Tvrtko Ursulin, Stanislav Lisovskiy
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
commit ec663bca9128f13eada25cd0446e7fcb5fcdc088 upstream.
If the only thing that is changing is SAGV vs. no SAGV but
the number of active planes and the total data rates end up
unchanged we currently bail out of intel_bw_atomic_check()
early and forget to actually compute the new WGV point
mask and thus won't actually enable/disable SAGV as requested.
This ends up poorly if we end up running with SAGV enabled
when we shouldn't. Usually ends up in underruns.
To fix this let's go through the QGV point mask computation
if either the data rates/number of planes, or the state
of SAGV is changing.
v2: Check more carefully if things are changing to avoid
the extra calculations/debugs from introducing unwanted
overhead
Cc: stable@vger.kernel.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Fixes: 20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-3-ville.syrjala@linux.intel.com
(cherry picked from commit 6b728595ffa51c087343c716bccbfc260f120e72)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/display/intel_bw.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -681,6 +681,7 @@ int intel_bw_atomic_check(struct intel_a
unsigned int max_bw_point = 0, max_bw = 0;
unsigned int num_qgv_points = dev_priv->max_bw[0].num_qgv_points;
unsigned int num_psf_gv_points = dev_priv->max_bw[0].num_psf_gv_points;
+ bool changed = false;
u32 mask = 0;
/* FIXME earlier gens need some checks too */
@@ -724,6 +725,8 @@ int intel_bw_atomic_check(struct intel_a
new_bw_state->data_rate[crtc->pipe] = new_data_rate;
new_bw_state->num_active_planes[crtc->pipe] = new_active_planes;
+ changed = true;
+
drm_dbg_kms(&dev_priv->drm,
"pipe %c data rate %u num active planes %u\n",
pipe_name(crtc->pipe),
@@ -731,7 +734,19 @@ int intel_bw_atomic_check(struct intel_a
new_bw_state->num_active_planes[crtc->pipe]);
}
- if (!new_bw_state)
+ old_bw_state = intel_atomic_get_old_bw_state(state);
+ new_bw_state = intel_atomic_get_new_bw_state(state);
+
+ if (new_bw_state &&
+ intel_can_enable_sagv(dev_priv, old_bw_state) !=
+ intel_can_enable_sagv(dev_priv, new_bw_state))
+ changed = true;
+
+ /*
+ * If none of our inputs (data rates, number of active
+ * planes, SAGV yes/no) changed then nothing to do here.
+ */
+ if (!changed)
return 0;
ret = intel_atomic_lock_global_state(&new_bw_state->base);
@@ -814,7 +829,6 @@ int intel_bw_atomic_check(struct intel_a
*/
new_bw_state->qgv_points_mask = ~allowed_points & mask;
- old_bw_state = intel_atomic_get_old_bw_state(state);
/*
* If the actual mask had changed we need to make sure that
* the commits are serialized(in case this is a nomodeset, nonblocking)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 024/139] sr9700: sanity check for packet length
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 023/139] drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 025/139] USB: zaurus: support another broken Zaurus Greg Kroah-Hartman
` (124 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Grant Grundler,
David S. Miller
From: Oliver Neukum <oneukum@suse.com>
commit e9da0b56fe27206b49f39805f7dcda8a89379062 upstream.
A malicious device can leak heap data to user space
providing bogus frame lengths. Introduce a sanity check.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/sr9700.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/usb/sr9700.c
+++ b/drivers/net/usb/sr9700.c
@@ -410,7 +410,7 @@ static int sr9700_rx_fixup(struct usbnet
/* ignore the CRC length */
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
- if (len > ETH_FRAME_LEN)
+ if (len > ETH_FRAME_LEN || len > skb->len)
return 0;
/* the last packet of current skb */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 025/139] USB: zaurus: support another broken Zaurus
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 024/139] sr9700: sanity check for packet length Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 026/139] CDC-NCM: avoid overflow in sanity checking Greg Kroah-Hartman
` (123 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Ross Maynard, David S. Miller
From: Oliver Neukum <oneukum@suse.com>
commit 6605cc67ca18b9d583eb96e18a20f5f4e726103c upstream.
This SL-6000 says Direct Line, not Ethernet
v2: added Reporter and Link
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Ross Maynard <bids.7405@bigpond.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/cdc_ether.c | 12 ++++++++++++
drivers/net/usb/zaurus.c | 12 ++++++++++++
2 files changed, 24 insertions(+)
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -583,6 +583,11 @@ static const struct usb_device_id produc
.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
.bInterfaceProtocol = USB_CDC_PROTO_NONE
+#define ZAURUS_FAKE_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
* wire-incompatible with true CDC Ethernet implementations.
* (And, it seems, needlessly so...)
@@ -638,6 +643,13 @@ static const struct usb_device_id produc
.driver_info = 0,
}, {
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_FAKE_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
| USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = 0x04DD,
/* reported with some C860 units */
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -256,6 +256,11 @@ static const struct usb_device_id produc
.bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
.bInterfaceProtocol = USB_CDC_PROTO_NONE
+#define ZAURUS_FAKE_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
{
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
@@ -315,6 +320,13 @@ static const struct usb_device_id produc
.driver_info = ZAURUS_PXA_INFO,
}, {
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_FAKE_INTERFACE,
+ .driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
| USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = 0x04DD,
/* reported with some C860 units */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 026/139] CDC-NCM: avoid overflow in sanity checking
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 025/139] USB: zaurus: support another broken Zaurus Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 027/139] netfilter: xt_socket: fix a typo in socket_mt_destroy() Greg Kroah-Hartman
` (122 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Oliver Neukum, David S. Miller
From: Oliver Neukum <oneukum@suse.com>
commit 8d2b1a1ec9f559d30b724877da4ce592edc41fdc upstream.
A broken device may give an extreme offset like 0xFFF0
and a reasonable length for a fragment. In the sanity
check as formulated now, this will create an integer
overflow, defeating the sanity check. Both offset
and offset + len need to be checked in such a manner
that no overflow can occur.
And those quantities should be unsigned.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/cdc_ncm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1715,10 +1715,10 @@ int cdc_ncm_rx_fixup(struct usbnet *dev,
{
struct sk_buff *skb;
struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
- int len;
+ unsigned int len;
int nframes;
int x;
- int offset;
+ unsigned int offset;
union {
struct usb_cdc_ncm_ndp16 *ndp16;
struct usb_cdc_ncm_ndp32 *ndp32;
@@ -1790,8 +1790,8 @@ next_ndp:
break;
}
- /* sanity checking */
- if (((offset + len) > skb_in->len) ||
+ /* sanity checking - watch out for integer wrap*/
+ if ((offset > skb_in->len) || (len > skb_in->len - offset) ||
(len > ctx->rx_max) || (len < ETH_HLEN)) {
netif_dbg(dev, rx_err, dev->net,
"invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 027/139] netfilter: xt_socket: fix a typo in socket_mt_destroy()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 026/139] CDC-NCM: avoid overflow in sanity checking Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 028/139] netfilter: xt_socket: missing ifdef CONFIG_IP6_NF_IPTABLES dependency Greg Kroah-Hartman
` (121 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Florian Westphal,
Pablo Neira Ayuso
From: Eric Dumazet <edumazet@google.com>
commit 75063c9294fb239bbe64eb72141b6871fe526d29 upstream.
Calling nf_defrag_ipv4_disable() instead of nf_defrag_ipv6_disable()
was probably not the intent.
I found this by code inspection, while chasing a possible issue in TPROXY.
Fixes: de8c12110a13 ("netfilter: disable defrag once its no longer needed")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/xt_socket.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -221,7 +221,7 @@ static void socket_mt_destroy(const stru
if (par->family == NFPROTO_IPV4)
nf_defrag_ipv4_disable(par->net);
else if (par->family == NFPROTO_IPV6)
- nf_defrag_ipv4_disable(par->net);
+ nf_defrag_ipv6_disable(par->net);
}
static struct xt_match socket_mt_reg[] __read_mostly = {
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 028/139] netfilter: xt_socket: missing ifdef CONFIG_IP6_NF_IPTABLES dependency
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 027/139] netfilter: xt_socket: fix a typo in socket_mt_destroy() Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 029/139] netfilter: nf_tables_offload: incorrect flow offload action array size Greg Kroah-Hartman
` (120 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Eric Dumazet,
Pablo Neira Ayuso
From: Pablo Neira Ayuso <pablo@netfilter.org>
commit 2874b7911132f6975e668f6849c8ac93bc4e1f35 upstream.
nf_defrag_ipv6_disable() requires CONFIG_IP6_NF_IPTABLES.
Fixes: 75063c9294fb ("netfilter: xt_socket: fix a typo in socket_mt_destroy()")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Eric Dumazet<edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/xt_socket.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -220,8 +220,10 @@ static void socket_mt_destroy(const stru
{
if (par->family == NFPROTO_IPV4)
nf_defrag_ipv4_disable(par->net);
+#if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)
else if (par->family == NFPROTO_IPV6)
nf_defrag_ipv6_disable(par->net);
+#endif
}
static struct xt_match socket_mt_reg[] __read_mostly = {
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 029/139] netfilter: nf_tables_offload: incorrect flow offload action array size
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 028/139] netfilter: xt_socket: missing ifdef CONFIG_IP6_NF_IPTABLES dependency Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 030/139] tee: export teedev_open() and teedev_close_context() Greg Kroah-Hartman
` (119 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso, Nick Gregory
From: Pablo Neira Ayuso <pablo@netfilter.org>
commit b1a5983f56e371046dcf164f90bfaf704d2b89f6 upstream.
immediate verdict expression needs to allocate one slot in the flow offload
action array, however, immediate data expression does not need to do so.
fwd and dup expression need to allocate one slot, this is missing.
Add a new offload_action interface to report if this expression needs to
allocate one slot in the flow offload action array.
Fixes: be2861dc36d7 ("netfilter: nft_{fwd,dup}_netdev: add offload support")
Reported-and-tested-by: Nick Gregory <Nick.Gregory@Sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/netfilter/nf_tables.h | 2 +-
include/net/netfilter/nf_tables_offload.h | 2 --
net/netfilter/nf_tables_offload.c | 3 ++-
net/netfilter/nft_dup_netdev.c | 6 ++++++
net/netfilter/nft_fwd_netdev.c | 6 ++++++
net/netfilter/nft_immediate.c | 12 +++++++++++-
6 files changed, 26 insertions(+), 5 deletions(-)
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -883,9 +883,9 @@ struct nft_expr_ops {
int (*offload)(struct nft_offload_ctx *ctx,
struct nft_flow_rule *flow,
const struct nft_expr *expr);
+ bool (*offload_action)(const struct nft_expr *expr);
void (*offload_stats)(struct nft_expr *expr,
const struct flow_stats *stats);
- u32 offload_flags;
const struct nft_expr_type *type;
void *data;
};
--- a/include/net/netfilter/nf_tables_offload.h
+++ b/include/net/netfilter/nf_tables_offload.h
@@ -67,8 +67,6 @@ struct nft_flow_rule {
struct flow_rule *rule;
};
-#define NFT_OFFLOAD_F_ACTION (1 << 0)
-
void nft_flow_rule_set_addr_type(struct nft_flow_rule *flow,
enum flow_dissector_key_id addr_type);
--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -94,7 +94,8 @@ struct nft_flow_rule *nft_flow_rule_crea
expr = nft_expr_first(rule);
while (nft_expr_more(rule, expr)) {
- if (expr->ops->offload_flags & NFT_OFFLOAD_F_ACTION)
+ if (expr->ops->offload_action &&
+ expr->ops->offload_action(expr))
num_actions++;
expr = nft_expr_next(expr);
--- a/net/netfilter/nft_dup_netdev.c
+++ b/net/netfilter/nft_dup_netdev.c
@@ -67,6 +67,11 @@ static int nft_dup_netdev_offload(struct
return nft_fwd_dup_netdev_offload(ctx, flow, FLOW_ACTION_MIRRED, oif);
}
+static bool nft_dup_netdev_offload_action(const struct nft_expr *expr)
+{
+ return true;
+}
+
static struct nft_expr_type nft_dup_netdev_type;
static const struct nft_expr_ops nft_dup_netdev_ops = {
.type = &nft_dup_netdev_type,
@@ -75,6 +80,7 @@ static const struct nft_expr_ops nft_dup
.init = nft_dup_netdev_init,
.dump = nft_dup_netdev_dump,
.offload = nft_dup_netdev_offload,
+ .offload_action = nft_dup_netdev_offload_action,
};
static struct nft_expr_type nft_dup_netdev_type __read_mostly = {
--- a/net/netfilter/nft_fwd_netdev.c
+++ b/net/netfilter/nft_fwd_netdev.c
@@ -77,6 +77,11 @@ static int nft_fwd_netdev_offload(struct
return nft_fwd_dup_netdev_offload(ctx, flow, FLOW_ACTION_REDIRECT, oif);
}
+static bool nft_fwd_netdev_offload_action(const struct nft_expr *expr)
+{
+ return true;
+}
+
struct nft_fwd_neigh {
u8 sreg_dev;
u8 sreg_addr;
@@ -219,6 +224,7 @@ static const struct nft_expr_ops nft_fwd
.dump = nft_fwd_netdev_dump,
.validate = nft_fwd_validate,
.offload = nft_fwd_netdev_offload,
+ .offload_action = nft_fwd_netdev_offload_action,
};
static const struct nft_expr_ops *
--- a/net/netfilter/nft_immediate.c
+++ b/net/netfilter/nft_immediate.c
@@ -213,6 +213,16 @@ static int nft_immediate_offload(struct
return 0;
}
+static bool nft_immediate_offload_action(const struct nft_expr *expr)
+{
+ const struct nft_immediate_expr *priv = nft_expr_priv(expr);
+
+ if (priv->dreg == NFT_REG_VERDICT)
+ return true;
+
+ return false;
+}
+
static const struct nft_expr_ops nft_imm_ops = {
.type = &nft_imm_type,
.size = NFT_EXPR_SIZE(sizeof(struct nft_immediate_expr)),
@@ -224,7 +234,7 @@ static const struct nft_expr_ops nft_imm
.dump = nft_immediate_dump,
.validate = nft_immediate_validate,
.offload = nft_immediate_offload,
- .offload_flags = NFT_OFFLOAD_F_ACTION,
+ .offload_action = nft_immediate_offload_action,
};
struct nft_expr_type nft_imm_type __read_mostly = {
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 030/139] tee: export teedev_open() and teedev_close_context()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 029/139] netfilter: nf_tables_offload: incorrect flow offload action array size Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 031/139] optee: use driver internal tee_context for some rpc Greg Kroah-Hartman
` (118 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sumit Garg, Jens Wiklander
From: Jens Wiklander <jens.wiklander@linaro.org>
commit 1e2c3ef0496e72ba9001da5fd1b7ed56ccb30597 upstream.
Exports the two functions teedev_open() and teedev_close_context() in
order to make it easier to create a driver internal struct tee_context.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tee/tee_core.c | 6 ++++--
include/linux/tee_drv.h | 14 ++++++++++++++
2 files changed, 18 insertions(+), 2 deletions(-)
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -43,7 +43,7 @@ static DEFINE_SPINLOCK(driver_lock);
static struct class *tee_class;
static dev_t tee_devt;
-static struct tee_context *teedev_open(struct tee_device *teedev)
+struct tee_context *teedev_open(struct tee_device *teedev)
{
int rc;
struct tee_context *ctx;
@@ -70,6 +70,7 @@ err:
return ERR_PTR(rc);
}
+EXPORT_SYMBOL_GPL(teedev_open);
void teedev_ctx_get(struct tee_context *ctx)
{
@@ -96,13 +97,14 @@ void teedev_ctx_put(struct tee_context *
kref_put(&ctx->refcount, teedev_ctx_release);
}
-static void teedev_close_context(struct tee_context *ctx)
+void teedev_close_context(struct tee_context *ctx)
{
struct tee_device *teedev = ctx->teedev;
teedev_ctx_put(ctx);
tee_device_put(teedev);
}
+EXPORT_SYMBOL_GPL(teedev_close_context);
static int tee_open(struct inode *inode, struct file *filp)
{
--- a/include/linux/tee_drv.h
+++ b/include/linux/tee_drv.h
@@ -582,4 +582,18 @@ struct tee_client_driver {
#define to_tee_client_driver(d) \
container_of(d, struct tee_client_driver, driver)
+/**
+ * teedev_open() - Open a struct tee_device
+ * @teedev: Device to open
+ *
+ * @return a pointer to struct tee_context on success or an ERR_PTR on failure.
+ */
+struct tee_context *teedev_open(struct tee_device *teedev);
+
+/**
+ * teedev_close_context() - closes a struct tee_context
+ * @ctx: The struct tee_context to close
+ */
+void teedev_close_context(struct tee_context *ctx);
+
#endif /*__TEE_DRV_H*/
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 031/139] optee: use driver internal tee_context for some rpc
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 030/139] tee: export teedev_open() and teedev_close_context() Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 032/139] ping: remove pr_err from ping_lookup Greg Kroah-Hartman
` (117 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars Persson, Sumit Garg, Jens Wiklander
From: Jens Wiklander <jens.wiklander@linaro.org>
commit aceeafefff736057e8f93f19bbfbef26abd94604 upstream.
Adds a driver private tee_context by moving the tee_context in struct
optee_notif to struct optee. This tee_context was previously used when
doing internal calls to secure world to deliver notification.
The new driver internal tee_context is now also when allocating driver
private shared memory. This decouples the shared memory object from its
original tee_context. This is needed when the life time of such a memory
allocation outlives the client tee_context.
This patch fixes the problem described below:
The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out
of memory failure seen during kexec reboot") introduced a kernel shutdown
regression that can be triggered after running the OP-TEE xtest suites.
Once the shutdown hook is called it is not possible to communicate any more
with the supplicant process because the system is not scheduling task any
longer. Thus if the optee driver shutdown path receives a supplicant RPC
request from the OP-TEE we will deadlock the kernel's shutdown.
Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot")
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reported-by: Lars Persson <larper@axis.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
[JW: backport to 5.15-stable + update commit message]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tee/optee/core.c | 8 ++++++++
drivers/tee/optee/optee_private.h | 2 ++
drivers/tee/optee/rpc.c | 8 +++++---
3 files changed, 15 insertions(+), 3 deletions(-)
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -588,6 +588,7 @@ static int optee_remove(struct platform_
/* Unregister OP-TEE specific client devices on TEE bus */
optee_unregister_devices();
+ teedev_close_context(optee->ctx);
/*
* Ask OP-TEE to free all cached shared memory objects to decrease
* reference counters and also avoid wild pointers in secure world
@@ -633,6 +634,7 @@ static int optee_probe(struct platform_d
struct optee *optee = NULL;
void *memremaped_shm = NULL;
struct tee_device *teedev;
+ struct tee_context *ctx;
u32 sec_caps;
int rc;
@@ -719,6 +721,12 @@ static int optee_probe(struct platform_d
optee_supp_init(&optee->supp);
optee->memremaped_shm = memremaped_shm;
optee->pool = pool;
+ ctx = teedev_open(optee->teedev);
+ if (IS_ERR(ctx)) {
+ rc = PTR_ERR(ctx);
+ goto err;
+ }
+ optee->ctx = ctx;
/*
* Ensure that there are no pre-existing shm objects before enabling
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -70,6 +70,7 @@ struct optee_supp {
* struct optee - main service struct
* @supp_teedev: supplicant device
* @teedev: client device
+ * @ctx: driver internal TEE context
* @invoke_fn: function to issue smc or hvc
* @call_queue: queue of threads waiting to call @invoke_fn
* @wait_queue: queue of threads from secure world waiting for a
@@ -87,6 +88,7 @@ struct optee {
struct tee_device *supp_teedev;
struct tee_device *teedev;
optee_invoke_fn *invoke_fn;
+ struct tee_context *ctx;
struct optee_call_queue call_queue;
struct optee_wait_queue wait_queue;
struct optee_supp supp;
--- a/drivers/tee/optee/rpc.c
+++ b/drivers/tee/optee/rpc.c
@@ -285,6 +285,7 @@ static struct tee_shm *cmd_alloc_suppl(s
}
static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+ struct optee *optee,
struct optee_msg_arg *arg,
struct optee_call_ctx *call_ctx)
{
@@ -314,7 +315,8 @@ static void handle_rpc_func_cmd_shm_allo
shm = cmd_alloc_suppl(ctx, sz);
break;
case OPTEE_RPC_SHM_TYPE_KERNEL:
- shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED | TEE_SHM_PRIV);
+ shm = tee_shm_alloc(optee->ctx, sz,
+ TEE_SHM_MAPPED | TEE_SHM_PRIV);
break;
default:
arg->ret = TEEC_ERROR_BAD_PARAMETERS;
@@ -471,7 +473,7 @@ static void handle_rpc_func_cmd(struct t
break;
case OPTEE_RPC_CMD_SHM_ALLOC:
free_pages_list(call_ctx);
- handle_rpc_func_cmd_shm_alloc(ctx, arg, call_ctx);
+ handle_rpc_func_cmd_shm_alloc(ctx, optee, arg, call_ctx);
break;
case OPTEE_RPC_CMD_SHM_FREE:
handle_rpc_func_cmd_shm_free(ctx, arg);
@@ -502,7 +504,7 @@ void optee_handle_rpc(struct tee_context
switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
case OPTEE_SMC_RPC_FUNC_ALLOC:
- shm = tee_shm_alloc(ctx, param->a1,
+ shm = tee_shm_alloc(optee->ctx, param->a1,
TEE_SHM_MAPPED | TEE_SHM_PRIV);
if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
reg_pair_from_64(¶m->a1, ¶m->a2, pa);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 032/139] ping: remove pr_err from ping_lookup
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 031/139] optee: use driver internal tee_context for some rpc Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 033/139] Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" Greg Kroah-Hartman
` (116 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jakub Kicinski, Xin Long
From: Xin Long <lucien.xin@gmail.com>
commit cd33bdcbead882c2e58fdb4a54a7bd75b610a452 upstream.
As Jakub noticed, prints should be avoided on the datapath.
Also, as packets would never come to the else branch in
ping_lookup(), remove pr_err() from ping_lookup().
Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/ping.c | 1 -
1 file changed, 1 deletion(-)
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -187,7 +187,6 @@ static struct sock *ping_lookup(struct n
(int)ident, &ipv6_hdr(skb)->daddr, dif);
#endif
} else {
- pr_err("ping: protocol(%x) is not supported\n", ntohs(skb->protocol));
return NULL;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 033/139] Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 032/139] ping: remove pr_err from ping_lookup Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 034/139] gpu: host1x: Always return syncpoint value when waiting Greg Kroah-Hartman
` (115 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mateusz Palczewski, Tony Nguyen,
Jakub Kicinski
From: Mateusz Palczewski <mateusz.palczewski@intel.com>
commit fe20371578ef640069e6ae9fa8038f60e7908565 upstream.
Revert of a patch that instead of fixing a AQ error when trying
to reset BW limit introduced several regressions related to
creation and managing TC. Currently there are errors when creating
a TC on both PF and VF.
Error log:
[17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391
[17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391
This reverts commit 3d2504663c41104b4359a15f35670cfa82de1bbf.
Fixes: 3d2504663c41 (i40e: Fix reset bw limit when DCB enabled with 1 TC)
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5372,15 +5372,7 @@ static int i40e_vsi_configure_bw_alloc(s
/* There is no need to reset BW when mqprio mode is on. */
if (pf->flags & I40E_FLAG_TC_MQPRIO)
return 0;
-
- if (!vsi->mqprio_qopt.qopt.hw) {
- if (pf->flags & I40E_FLAG_DCB_ENABLED)
- goto skip_reset;
-
- if (IS_ENABLED(CONFIG_I40E_DCB) &&
- i40e_dcb_hw_get_num_tc(&pf->hw) == 1)
- goto skip_reset;
-
+ if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
if (ret)
dev_info(&pf->pdev->dev,
@@ -5388,8 +5380,6 @@ static int i40e_vsi_configure_bw_alloc(s
vsi->seid);
return ret;
}
-
-skip_reset:
memset(&bw_data, 0, sizeof(bw_data));
bw_data.tc_valid_bits = enabled_tc;
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 034/139] gpu: host1x: Always return syncpoint value when waiting
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 033/139] Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 035/139] perf evlist: Fix failed to use cpu list for uncore events Greg Kroah-Hartman
` (114 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikko Perttunen, Thierry Reding
From: Mikko Perttunen <mperttunen@nvidia.com>
commit 184b58fa816fb5ee1854daf0d430766422bf2a77 upstream.
The new TegraDRM UAPI uses syncpoint waiting with timeout set to
zero to indicate reading the syncpoint value. To support that we
need to return the syncpoint value always when waiting.
Fixes: 44e961381354 ("drm/tegra: Implement syncpoint wait UAPI")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/host1x/syncpt.c | 19 ++-----------------
1 file changed, 2 insertions(+), 17 deletions(-)
--- a/drivers/gpu/host1x/syncpt.c
+++ b/drivers/gpu/host1x/syncpt.c
@@ -225,27 +225,12 @@ int host1x_syncpt_wait(struct host1x_syn
void *ref;
struct host1x_waitlist *waiter;
int err = 0, check_count = 0;
- u32 val;
if (value)
- *value = 0;
-
- /* first check cache */
- if (host1x_syncpt_is_expired(sp, thresh)) {
- if (value)
- *value = host1x_syncpt_load(sp);
+ *value = host1x_syncpt_load(sp);
+ if (host1x_syncpt_is_expired(sp, thresh))
return 0;
- }
-
- /* try to read from register */
- val = host1x_hw_syncpt_load(sp->host, sp);
- if (host1x_syncpt_is_expired(sp, thresh)) {
- if (value)
- *value = val;
-
- goto done;
- }
if (!timeout) {
err = -EAGAIN;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 035/139] perf evlist: Fix failed to use cpu list for uncore events
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 034/139] gpu: host1x: Always return syncpoint value when waiting Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 036/139] perf data: Fix double free in perf_session__delete() Greg Kroah-Hartman
` (113 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kan Liang, Zhengjun Xing,
Adrian Hunter, alexander.shishkin, Andi Kleen, Ian Rogers,
Jin Yao, Jiri Olsa, Peter Zijlstra, Arnaldo Carvalho de Melo
From: Zhengjun Xing <zhengjun.xing@linux.intel.com>
commit 8a3d2ee0de3828e0d01f9682d35ee53704659bd0 upstream.
The 'perf record' and 'perf stat' commands have supported the option
'-C/--cpus' to count or collect only on the list of CPUs provided.
Commit 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for
hybrid") add it to be supported for hybrid. For hybrid support, it
checks the cpu list are available on hybrid PMU. But when we test only
uncore events(or events not in cpu_core and cpu_atom), there is a bug:
Before:
# perf stat -C0 -e uncore_clock/clockticks/ sleep 1
failed to use cpu list 0
In this case, for uncore event, its pmu_name is not cpu_core or
cpu_atom, so in evlist__fix_hybrid_cpus, perf_pmu__find_hybrid_pmu
should return NULL,both events_nr and unmatched_count should be 0 ,then
the cpu list check function evlist__fix_hybrid_cpus return -1 and the
error "failed to use cpu list 0" will happen. Bypass "events_nr=0" case
then the issue is fixed.
After:
# perf stat -C0 -e uncore_clock/clockticks/ sleep 1
Performance counter stats for 'CPU(s) 0':
195,476,873 uncore_clock/clockticks/
1.004518677 seconds time elapsed
When testing with at least one core event and uncore events, it has no
issue.
# perf stat -C0 -e cpu_core/cpu-cycles/,uncore_clock/clockticks/ sleep 1
Performance counter stats for 'CPU(s) 0':
5,993,774 cpu_core/cpu-cycles/
301,025,912 uncore_clock/clockticks/
1.003964934 seconds time elapsed
Fixes: 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for hybrid")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexander.shishkin@intel.com
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220218093127.1844241-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/evlist-hybrid.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/tools/perf/util/evlist-hybrid.c
+++ b/tools/perf/util/evlist-hybrid.c
@@ -153,8 +153,8 @@ int evlist__fix_hybrid_cpus(struct evlis
perf_cpu_map__put(matched_cpus);
perf_cpu_map__put(unmatched_cpus);
}
-
- ret = (unmatched_count == events_nr) ? -1 : 0;
+ if (events_nr)
+ ret = (unmatched_count == events_nr) ? -1 : 0;
out:
perf_cpu_map__put(cpus);
return ret;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 036/139] perf data: Fix double free in perf_session__delete()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 035/139] perf evlist: Fix failed to use cpu list for uncore events Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 037/139] mptcp: fix race in incoming ADD_ADDR option processing Greg Kroah-Hartman
` (112 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexey Bayduraev, Jiri Olsa,
Adrian Hunter, Alexander Antonov, Alexander Shishkin,
Alexei Budankov, Andi Kleen, Ingo Molnar, Namhyung Kim,
Peter Zijlstra, Arnaldo Carvalho de Melo
From: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
commit 69560e366fc4d5fca7bebb0e44edbfafc8bcaf05 upstream.
When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.
This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().
Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/data.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/tools/perf/util/data.c
+++ b/tools/perf/util/data.c
@@ -44,10 +44,6 @@ int perf_data__create_dir(struct perf_da
if (!files)
return -ENOMEM;
- data->dir.version = PERF_DIR_VERSION;
- data->dir.files = files;
- data->dir.nr = nr;
-
for (i = 0; i < nr; i++) {
struct perf_data_file *file = &files[i];
@@ -62,6 +58,9 @@ int perf_data__create_dir(struct perf_da
file->fd = ret;
}
+ data->dir.version = PERF_DIR_VERSION;
+ data->dir.files = files;
+ data->dir.nr = nr;
return 0;
out_err:
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 037/139] mptcp: fix race in incoming ADD_ADDR option processing
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 036/139] perf data: Fix double free in perf_session__delete() Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 038/139] mptcp: add mibs counter for ignored incoming options Greg Kroah-Hartman
` (111 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthieu Baerts, Paolo Abeni,
Mat Martineau, David S. Miller
From: Paolo Abeni <pabeni@redhat.com>
commit 837cf45df163a3780bc04b555700231e95b31dc9 upstream.
If an MPTCP endpoint received multiple consecutive incoming
ADD_ADDR options, mptcp_pm_add_addr_received() can overwrite
the current remote address value after the PM lock is released
in mptcp_pm_nl_add_addr_received() and before such address
is echoed.
Fix the issue caching the remote address value a little earlier
and always using the cached value after releasing the PM lock.
Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mptcp/pm_netlink.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -606,6 +606,7 @@ static void mptcp_pm_nl_add_addr_receive
unsigned int add_addr_accept_max;
struct mptcp_addr_info remote;
unsigned int subflows_max;
+ bool reset_port = false;
int i, nr;
add_addr_accept_max = mptcp_pm_get_add_addr_accept_max(msk);
@@ -615,15 +616,19 @@ static void mptcp_pm_nl_add_addr_receive
msk->pm.add_addr_accepted, add_addr_accept_max,
msk->pm.remote.family);
- if (lookup_subflow_by_daddr(&msk->conn_list, &msk->pm.remote))
+ remote = msk->pm.remote;
+ if (lookup_subflow_by_daddr(&msk->conn_list, &remote))
goto add_addr_echo;
+ /* pick id 0 port, if none is provided the remote address */
+ if (!remote.port) {
+ reset_port = true;
+ remote.port = sk->sk_dport;
+ }
+
/* connect to the specified remote address, using whatever
* local address the routing configuration will pick.
*/
- remote = msk->pm.remote;
- if (!remote.port)
- remote.port = sk->sk_dport;
nr = fill_local_addresses_vec(msk, addrs);
msk->pm.add_addr_accepted++;
@@ -636,8 +641,12 @@ static void mptcp_pm_nl_add_addr_receive
__mptcp_subflow_connect(sk, &addrs[i], &remote);
spin_lock_bh(&msk->pm.lock);
+ /* be sure to echo exactly the received address */
+ if (reset_port)
+ remote.port = 0;
+
add_addr_echo:
- mptcp_pm_announce_addr(msk, &msk->pm.remote, true);
+ mptcp_pm_announce_addr(msk, &remote, true);
mptcp_pm_nl_addr_send_ack(msk);
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 038/139] mptcp: add mibs counter for ignored incoming options
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 037/139] mptcp: fix race in incoming ADD_ADDR option processing Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 039/139] selftests: mptcp: fix diag instability Greg Kroah-Hartman
` (110 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthieu Baerts, Paolo Abeni,
Mat Martineau, David S. Miller
From: Paolo Abeni <pabeni@redhat.com>
commit f73c1194634506ab60af0debef04671fc431a435 upstream.
The MPTCP in kernel path manager has some constraints on incoming
addresses announce processing, so that in edge scenarios it can
end-up dropping (ignoring) some of such announces.
The above is not very limiting in practice since such scenarios are
very uncommon and MPTCP will recover due to ADD_ADDR retransmissions.
This patch adds a few MIB counters to account for such drop events
to allow easier introspection of the critical scenarios.
Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mptcp/mib.c | 2 ++
net/mptcp/mib.h | 2 ++
net/mptcp/pm.c | 8 ++++++--
3 files changed, 10 insertions(+), 2 deletions(-)
--- a/net/mptcp/mib.c
+++ b/net/mptcp/mib.c
@@ -35,12 +35,14 @@ static const struct snmp_mib mptcp_snmp_
SNMP_MIB_ITEM("AddAddr", MPTCP_MIB_ADDADDR),
SNMP_MIB_ITEM("EchoAdd", MPTCP_MIB_ECHOADD),
SNMP_MIB_ITEM("PortAdd", MPTCP_MIB_PORTADD),
+ SNMP_MIB_ITEM("AddAddrDrop", MPTCP_MIB_ADDADDRDROP),
SNMP_MIB_ITEM("MPJoinPortSynRx", MPTCP_MIB_JOINPORTSYNRX),
SNMP_MIB_ITEM("MPJoinPortSynAckRx", MPTCP_MIB_JOINPORTSYNACKRX),
SNMP_MIB_ITEM("MPJoinPortAckRx", MPTCP_MIB_JOINPORTACKRX),
SNMP_MIB_ITEM("MismatchPortSynRx", MPTCP_MIB_MISMATCHPORTSYNRX),
SNMP_MIB_ITEM("MismatchPortAckRx", MPTCP_MIB_MISMATCHPORTACKRX),
SNMP_MIB_ITEM("RmAddr", MPTCP_MIB_RMADDR),
+ SNMP_MIB_ITEM("RmAddrDrop", MPTCP_MIB_RMADDRDROP),
SNMP_MIB_ITEM("RmSubflow", MPTCP_MIB_RMSUBFLOW),
SNMP_MIB_ITEM("MPPrioTx", MPTCP_MIB_MPPRIOTX),
SNMP_MIB_ITEM("MPPrioRx", MPTCP_MIB_MPPRIORX),
--- a/net/mptcp/mib.h
+++ b/net/mptcp/mib.h
@@ -28,12 +28,14 @@ enum linux_mptcp_mib_field {
MPTCP_MIB_ADDADDR, /* Received ADD_ADDR with echo-flag=0 */
MPTCP_MIB_ECHOADD, /* Received ADD_ADDR with echo-flag=1 */
MPTCP_MIB_PORTADD, /* Received ADD_ADDR with a port-number */
+ MPTCP_MIB_ADDADDRDROP, /* Dropped incoming ADD_ADDR */
MPTCP_MIB_JOINPORTSYNRX, /* Received a SYN MP_JOIN with a different port-number */
MPTCP_MIB_JOINPORTSYNACKRX, /* Received a SYNACK MP_JOIN with a different port-number */
MPTCP_MIB_JOINPORTACKRX, /* Received an ACK MP_JOIN with a different port-number */
MPTCP_MIB_MISMATCHPORTSYNRX, /* Received a SYN MP_JOIN with a mismatched port-number */
MPTCP_MIB_MISMATCHPORTACKRX, /* Received an ACK MP_JOIN with a mismatched port-number */
MPTCP_MIB_RMADDR, /* Received RM_ADDR */
+ MPTCP_MIB_RMADDRDROP, /* Dropped incoming RM_ADDR */
MPTCP_MIB_RMSUBFLOW, /* Remove a subflow */
MPTCP_MIB_MPPRIOTX, /* Transmit a MP_PRIO */
MPTCP_MIB_MPPRIORX, /* Received a MP_PRIO */
--- a/net/mptcp/pm.c
+++ b/net/mptcp/pm.c
@@ -194,6 +194,8 @@ void mptcp_pm_add_addr_received(struct m
mptcp_pm_add_addr_send_ack(msk);
} else if (mptcp_pm_schedule_work(msk, MPTCP_PM_ADD_ADDR_RECEIVED)) {
pm->remote = *addr;
+ } else {
+ __MPTCP_INC_STATS(sock_net((struct sock *)msk), MPTCP_MIB_ADDADDRDROP);
}
spin_unlock_bh(&pm->lock);
@@ -234,8 +236,10 @@ void mptcp_pm_rm_addr_received(struct mp
mptcp_event_addr_removed(msk, rm_list->ids[i]);
spin_lock_bh(&pm->lock);
- mptcp_pm_schedule_work(msk, MPTCP_PM_RM_ADDR_RECEIVED);
- pm->rm_list_rx = *rm_list;
+ if (mptcp_pm_schedule_work(msk, MPTCP_PM_RM_ADDR_RECEIVED))
+ pm->rm_list_rx = *rm_list;
+ else
+ __MPTCP_INC_STATS(sock_net((struct sock *)msk), MPTCP_MIB_RMADDRDROP);
spin_unlock_bh(&pm->lock);
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 039/139] selftests: mptcp: fix diag instability
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 038/139] mptcp: add mibs counter for ignored incoming options Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 040/139] selftests: mptcp: be more conservative with cookie MPJ limits Greg Kroah-Hartman
` (109 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Mat Martineau,
David S. Miller, Matthieu Baerts
From: Paolo Abeni <pabeni@redhat.com>
commit 0cd33c5ffec12bd77a1c02db2469fac08f840939 upstream.
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/net/mptcp/diag.sh | 44 +++++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 7 deletions(-)
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -71,6 +71,36 @@ chk_msk_remote_key_nr()
__chk_nr "grep -c remote_key" $*
}
+# $1: ns, $2: port
+wait_local_port_listen()
+{
+ local listener_ns="${1}"
+ local port="${2}"
+
+ local port_hex i
+
+ port_hex="$(printf "%04X" "${port}")"
+ for i in $(seq 10); do
+ ip netns exec "${listener_ns}" cat /proc/net/tcp | \
+ awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" &&
+ break
+ sleep 0.1
+ done
+}
+
+wait_connected()
+{
+ local listener_ns="${1}"
+ local port="${2}"
+
+ local port_hex i
+
+ port_hex="$(printf "%04X" "${port}")"
+ for i in $(seq 10); do
+ ip netns exec ${listener_ns} grep -q " 0100007F:${port_hex} " /proc/net/tcp && break
+ sleep 0.1
+ done
+}
trap cleanup EXIT
ip netns add $ns
@@ -81,15 +111,15 @@ echo "a" | \
ip netns exec $ns \
./mptcp_connect -p 10000 -l -t ${timeout_poll} \
0.0.0.0 >/dev/null &
-sleep 0.1
+wait_local_port_listen $ns 10000
chk_msk_nr 0 "no msk on netns creation"
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10000 -j -t ${timeout_poll} \
+ ./mptcp_connect -p 10000 -r 0 -t ${timeout_poll} \
127.0.0.1 >/dev/null &
-sleep 0.1
+wait_connected $ns 10000
chk_msk_nr 2 "after MPC handshake "
chk_msk_remote_key_nr 2 "....chk remote_key"
chk_msk_fallback_nr 0 "....chk no fallback"
@@ -101,13 +131,13 @@ echo "a" | \
ip netns exec $ns \
./mptcp_connect -p 10001 -l -s TCP -t ${timeout_poll} \
0.0.0.0 >/dev/null &
-sleep 0.1
+wait_local_port_listen $ns 10001
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10001 -j -t ${timeout_poll} \
+ ./mptcp_connect -p 10001 -r 0 -t ${timeout_poll} \
127.0.0.1 >/dev/null &
-sleep 0.1
+wait_connected $ns 10001
chk_msk_fallback_nr 1 "check fallback"
flush_pids
@@ -119,7 +149,7 @@ for I in `seq 1 $NR_CLIENTS`; do
./mptcp_connect -p $((I+10001)) -l -w 10 \
-t ${timeout_poll} 0.0.0.0 >/dev/null &
done
-sleep 0.1
+wait_local_port_listen $ns $((NR_CLIENTS + 10001))
for I in `seq 1 $NR_CLIENTS`; do
echo "b" | \
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 040/139] selftests: mptcp: be more conservative with cookie MPJ limits
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 039/139] selftests: mptcp: fix diag instability Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 041/139] bnx2x: fix driver load from initrd Greg Kroah-Hartman
` (108 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Mat Martineau, David S. Miller
From: Paolo Abeni <pabeni@redhat.com>
commit e35f885b357d47e04380a2056d1b2cc3e6f4f24b upstream.
Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -624,6 +624,7 @@ chk_join_nr()
local ack_nr=$4
local count
local dump_stats
+ local with_cookie
printf "%02u %-36s %s" "$TEST_COUNT" "$msg" "syn"
count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}'`
@@ -637,12 +638,20 @@ chk_join_nr()
fi
echo -n " - synack"
+ with_cookie=`ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies`
count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}'`
[ -z "$count" ] && count=0
if [ "$count" != "$syn_ack_nr" ]; then
- echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr"
- ret=1
- dump_stats=1
+ # simult connections exceeding the limit with cookie enabled could go up to
+ # synack validation as the conn limit can be enforced reliably only after
+ # the subflow creation
+ if [ "$with_cookie" = 2 ] && [ "$count" -gt "$syn_ack_nr" ] && [ "$count" -le "$syn_nr" ]; then
+ echo -n "[ ok ]"
+ else
+ echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr"
+ ret=1
+ dump_stats=1
+ fi
else
echo -n "[ ok ]"
fi
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 041/139] bnx2x: fix driver load from initrd
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 040/139] selftests: mptcp: be more conservative with cookie MPJ limits Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 042/139] bnxt_en: Fix active FEC reporting to ethtool Greg Kroah-Hartman
` (107 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manish Chopra, Alok Prasad,
Ariel Elior, Jakub Kicinski
From: Manish Chopra <manishc@marvell.com>
commit e13ad1443684f7afaff24cf207e85e97885256bd upstream.
Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added
new firmware support in the driver with maintaining older firmware
compatibility. However, older firmware was not added in MODULE_FIRMWARE()
which caused missing firmware files in initrd image leading to driver load
failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware
version to have firmware files included in initrd.
Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -100,6 +100,9 @@ MODULE_LICENSE("GPL");
MODULE_FIRMWARE(FW_FILE_NAME_E1);
MODULE_FIRMWARE(FW_FILE_NAME_E1H);
MODULE_FIRMWARE(FW_FILE_NAME_E2);
+MODULE_FIRMWARE(FW_FILE_NAME_E1_V15);
+MODULE_FIRMWARE(FW_FILE_NAME_E1H_V15);
+MODULE_FIRMWARE(FW_FILE_NAME_E2_V15);
int bnx2x_num_queues;
module_param_named(num_queues, bnx2x_num_queues, int, 0444);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 042/139] bnxt_en: Fix active FEC reporting to ethtool
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 041/139] bnx2x: fix driver load from initrd Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 043/139] bnxt_en: Fix offline ethtool selftest with RDMA enabled Greg Kroah-Hartman
` (106 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Somnath Kotur, Michael Chan, David S. Miller
From: Somnath Kotur <somnath.kotur@broadcom.com>
commit 84d3c83e6ea7d46cf3de3a54578af73eb24a64f2 upstream.
ethtool --show-fec <interface> does not show anything when the Active
FEC setting in the chip is set to None. Fix it to properly return
ETHTOOL_FEC_OFF in that case.
Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -1942,6 +1942,9 @@ static int bnxt_get_fecparam(struct net_
case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE:
fec->active_fec |= ETHTOOL_FEC_LLRS;
break;
+ case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_NONE_ACTIVE:
+ fec->active_fec |= ETHTOOL_FEC_OFF;
+ break;
}
return 0;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 043/139] bnxt_en: Fix offline ethtool selftest with RDMA enabled
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 042/139] bnxt_en: Fix active FEC reporting to ethtool Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 044/139] bnxt_en: Fix incorrect multicast rx mask setting when not requested Greg Kroah-Hartman
` (105 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Edwin Peer, Ben Li, Michael Chan,
David S. Miller
From: Michael Chan <michael.chan@broadcom.com>
commit 6758f937669dba14c6aac7ca004edda42ec1b18d upstream.
For offline (destructive) self tests, we need to stop the RDMA driver
first. Otherwise, the RDMA driver will run into unrecoverable errors
when destructive firmware tests are being performed.
The irq_re_init parameter used in the half close and half open
sequence when preparing the NIC for offline tests should be set to
true because the RDMA driver will free all IRQs before the offline
tests begin.
Fixes: 55fd0cf320c3 ("bnxt_en: Add external loopback test to ethtool selftest.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Ben Li <ben.li@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 10 +++++-----
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 12 +++++++++---
2 files changed, 14 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10295,12 +10295,12 @@ int bnxt_half_open_nic(struct bnxt *bp)
goto half_open_err;
}
- rc = bnxt_alloc_mem(bp, false);
+ rc = bnxt_alloc_mem(bp, true);
if (rc) {
netdev_err(bp->dev, "bnxt_alloc_mem err: %x\n", rc);
goto half_open_err;
}
- rc = bnxt_init_nic(bp, false);
+ rc = bnxt_init_nic(bp, true);
if (rc) {
netdev_err(bp->dev, "bnxt_init_nic err: %x\n", rc);
goto half_open_err;
@@ -10309,7 +10309,7 @@ int bnxt_half_open_nic(struct bnxt *bp)
half_open_err:
bnxt_free_skbs(bp);
- bnxt_free_mem(bp, false);
+ bnxt_free_mem(bp, true);
dev_close(bp->dev);
return rc;
}
@@ -10319,9 +10319,9 @@ half_open_err:
*/
void bnxt_half_close_nic(struct bnxt *bp)
{
- bnxt_hwrm_resource_free(bp, false, false);
+ bnxt_hwrm_resource_free(bp, false, true);
bnxt_free_skbs(bp);
- bnxt_free_mem(bp, false);
+ bnxt_free_mem(bp, true);
}
static void bnxt_reenable_sriov(struct bnxt *bp)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -25,6 +25,7 @@
#include "bnxt_hsi.h"
#include "bnxt.h"
#include "bnxt_hwrm.h"
+#include "bnxt_ulp.h"
#include "bnxt_xdp.h"
#include "bnxt_ptp.h"
#include "bnxt_ethtool.h"
@@ -3502,9 +3503,12 @@ static void bnxt_self_test(struct net_de
if (!offline) {
bnxt_run_fw_tests(bp, test_mask, &test_results);
} else {
- rc = bnxt_close_nic(bp, false, false);
- if (rc)
+ bnxt_ulp_stop(bp);
+ rc = bnxt_close_nic(bp, true, false);
+ if (rc) {
+ bnxt_ulp_start(bp, rc);
return;
+ }
bnxt_run_fw_tests(bp, test_mask, &test_results);
buf[BNXT_MACLPBK_TEST_IDX] = 1;
@@ -3514,6 +3518,7 @@ static void bnxt_self_test(struct net_de
if (rc) {
bnxt_hwrm_mac_loopback(bp, false);
etest->flags |= ETH_TEST_FL_FAILED;
+ bnxt_ulp_start(bp, rc);
return;
}
if (bnxt_run_loopback(bp))
@@ -3539,7 +3544,8 @@ static void bnxt_self_test(struct net_de
}
bnxt_hwrm_phy_loopback(bp, false, false);
bnxt_half_close_nic(bp);
- rc = bnxt_open_nic(bp, false, true);
+ rc = bnxt_open_nic(bp, true, true);
+ bnxt_ulp_start(bp, rc);
}
if (rc || bnxt_test_irq(bp)) {
buf[BNXT_IRQ_TEST_IDX] = 1;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 044/139] bnxt_en: Fix incorrect multicast rx mask setting when not requested
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 043/139] bnxt_en: Fix offline ethtool selftest with RDMA enabled Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 045/139] hwmon: Handle failure to register sensor with thermal zone correctly Greg Kroah-Hartman
` (104 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavan Chebbi, Michael Chan, David S. Miller
From: Pavan Chebbi <pavan.chebbi@broadcom.com>
commit 8cdb15924252e27af16c4a8fe0fc606ce5fd04dc upstream.
We should setup multicast only when net_device flags explicitly
has IFF_MULTICAST set. Otherwise we will incorrectly turn it on
even when not asked. Fix it by only passing the multicast table
to the firmware if IFF_MULTICAST is set.
Fixes: 7d2837dd7a32 ("bnxt_en: Setup multicast properly after resetting device.")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4757,8 +4757,10 @@ static int bnxt_hwrm_cfa_l2_set_rx_mask(
return rc;
req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
- req->num_mc_entries = cpu_to_le32(vnic->mc_list_count);
- req->mc_tbl_addr = cpu_to_le64(vnic->mc_list_mapping);
+ if (vnic->rx_mask & CFA_L2_SET_RX_MASK_REQ_MASK_MCAST) {
+ req->num_mc_entries = cpu_to_le32(vnic->mc_list_count);
+ req->mc_tbl_addr = cpu_to_le64(vnic->mc_list_mapping);
+ }
req->mask = cpu_to_le32(vnic->rx_mask);
return hwrm_req_send_silent(bp, req);
}
@@ -8624,7 +8626,7 @@ static int bnxt_init_chip(struct bnxt *b
if (bp->dev->flags & IFF_ALLMULTI) {
vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST;
vnic->mc_list_count = 0;
- } else {
+ } else if (bp->dev->flags & IFF_MULTICAST) {
u32 mask = 0;
bnxt_mc_list_updated(bp, &mask);
@@ -10737,7 +10739,7 @@ static void bnxt_set_rx_mode(struct net_
if (dev->flags & IFF_ALLMULTI) {
mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST;
vnic->mc_list_count = 0;
- } else {
+ } else if (dev->flags & IFF_MULTICAST) {
mc_update = bnxt_mc_list_updated(bp, &mask);
}
@@ -10805,9 +10807,10 @@ skip_uc:
!bnxt_promisc_ok(bp))
vnic->rx_mask &= ~CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS;
rc = bnxt_hwrm_cfa_l2_set_rx_mask(bp, 0);
- if (rc && vnic->mc_list_count) {
+ if (rc && (vnic->rx_mask & CFA_L2_SET_RX_MASK_REQ_MASK_MCAST)) {
netdev_info(bp->dev, "Failed setting MC filters rc: %d, turning on ALL_MCAST mode\n",
rc);
+ vnic->rx_mask &= ~CFA_L2_SET_RX_MASK_REQ_MASK_MCAST;
vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST;
vnic->mc_list_count = 0;
rc = bnxt_hwrm_cfa_l2_set_rx_mask(bp, 0);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 045/139] hwmon: Handle failure to register sensor with thermal zone correctly
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 044/139] bnxt_en: Fix incorrect multicast rx mask setting when not requested Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 046/139] net/mlx5: Fix tc max supported prio for nic mode Greg Kroah-Hartman
` (103 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jon Hunter, Dmitry Osipenko,
Dmitry Osipenko, Guenter Roeck
From: Guenter Roeck <linux@roeck-us.net>
commit 1b5f517cca36292076d9e38fa6e33a257703e62e upstream.
If an attempt is made to a sensor with a thermal zone and it fails,
the call to devm_thermal_zone_of_sensor_register() may return -ENODEV.
This may result in crashes similar to the following.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd
...
Internal error: Oops: 96000021 [#1] PREEMPT SMP
...
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mutex_lock+0x18/0x60
lr : thermal_zone_device_update+0x40/0x2e0
sp : ffff800014c4fc60
x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790
x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000
x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd
x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000
x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040
x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000
x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd
x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd
Call trace:
mutex_lock+0x18/0x60
hwmon_notify_event+0xfc/0x110
0xffffdde1cb7a0a90
0xffffdde1cb7a0b7c
irq_thread_fn+0x2c/0xa0
irq_thread+0x134/0x240
kthread+0x178/0x190
ret_from_fork+0x10/0x20
Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02)
Jon Hunter reports that the exact call sequence is:
hwmon_notify_event()
--> hwmon_thermal_notify()
--> thermal_zone_device_update()
--> update_temperature()
--> mutex_lock()
The hwmon core needs to handle all errors returned from calls
to devm_thermal_zone_of_sensor_register(). If the call fails
with -ENODEV, report that the sensor was not attached to a
thermal zone but continue to register the hwmon device.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Fixes: 1597b374af222 ("hwmon: Add notification support")
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwmon/hwmon.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -214,12 +214,14 @@ static int hwmon_thermal_add_sensor(stru
tzd = devm_thermal_zone_of_sensor_register(dev, index, tdata,
&hwmon_thermal_ops);
- /*
- * If CONFIG_THERMAL_OF is disabled, this returns -ENODEV,
- * so ignore that error but forward any other error.
- */
- if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV))
- return PTR_ERR(tzd);
+ if (IS_ERR(tzd)) {
+ if (PTR_ERR(tzd) != -ENODEV)
+ return PTR_ERR(tzd);
+ dev_info(dev, "temp%d_input not attached to any thermal zone\n",
+ index + 1);
+ devm_kfree(dev, tdata);
+ return 0;
+ }
err = devm_add_action(dev, hwmon_thermal_remove_sensor, &tdata->node);
if (err)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 046/139] net/mlx5: Fix tc max supported prio for nic mode
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 045/139] hwmon: Handle failure to register sensor with thermal zone correctly Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 047/139] ice: check the return of ice_ptp_gettimex64 Greg Kroah-Hartman
` (102 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chris Mi, Roi Dayan, Saeed Mahameed
From: Chris Mi <cmi@nvidia.com>
commit be7f4b0ab149afd19514929fad824b2117d238c9 upstream.
Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.
Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
@@ -121,6 +121,9 @@ u32 mlx5_chains_get_nf_ft_chain(struct m
u32 mlx5_chains_get_prio_range(struct mlx5_fs_chains *chains)
{
+ if (!mlx5_chains_prios_supported(chains))
+ return 1;
+
if (mlx5_chains_ignore_flow_level_supported(chains))
return UINT_MAX;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 047/139] ice: check the return of ice_ptp_gettimex64
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 046/139] net/mlx5: Fix tc max supported prio for nic mode Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 048/139] ice: initialize local variable tlv Greg Kroah-Hartman
` (101 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tom Rix, Tony Nguyen, Gurucharan G
From: Tom Rix <trix@redhat.com>
commit ed22d9c8d128293fc7b0b086c7d3654bcb99a8dd upstream.
Clang static analysis reports this issue
time64.h:69:50: warning: The left operand of '+'
is a garbage value
set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec,
~~~~~~~~~~ ^
In ice_ptp_adjtime_nonatomic(), the timespec64 variable 'now'
is set by ice_ptp_gettimex64(). This function can fail
with -EBUSY, so 'now' can have a gargbage value.
So check the return.
Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices")
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/ice/ice_ptp.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -846,9 +846,12 @@ exit:
static int ice_ptp_adjtime_nonatomic(struct ptp_clock_info *info, s64 delta)
{
struct timespec64 now, then;
+ int ret;
then = ns_to_timespec64(delta);
- ice_ptp_gettimex64(info, &now, NULL);
+ ret = ice_ptp_gettimex64(info, &now, NULL);
+ if (ret)
+ return ret;
now = timespec64_add(now, then);
return ice_ptp_settime64(info, (const struct timespec64 *)&now);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 048/139] ice: initialize local variable tlv
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 047/139] ice: check the return of ice_ptp_gettimex64 Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 049/139] net/mlx5: Update the list of the PCI supported devices Greg Kroah-Hartman
` (100 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tom Rix, Tony Nguyen, Gurucharan G
From: Tom Rix <trix@redhat.com>
commit 5950bdc88dd1d158f2845fdff8fb1de86476806c upstream.
Clang static analysis reports this issues
ice_common.c:5008:21: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ldo->phy_type_low |= ((u64)buf << (i * 16));
~~~~~~~~~~~~~~~~~ ^
When called from ice_cfg_phy_fec() ldo is the uninitialized local
variable tlv. So initialize.
Fixes: ea78ce4dab05 ("ice: add link lenient and default override support")
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/ice/ice_common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -3270,7 +3270,7 @@ ice_cfg_phy_fec(struct ice_port_info *pi
if (fec == ICE_FEC_AUTO && ice_fw_supports_link_override(hw) &&
!ice_fw_supports_report_dflt_cfg(hw)) {
- struct ice_link_default_override_tlv tlv;
+ struct ice_link_default_override_tlv tlv = { 0 };
status = ice_get_link_default_override(&tlv, pi);
if (status)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 049/139] net/mlx5: Update the list of the PCI supported devices
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 048/139] ice: initialize local variable tlv Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 050/139] bpf: Fix crash due to incorrect copy_map_value Greg Kroah-Hartman
` (99 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Meir Lichtinger, Gal Pressman,
Tariq Toukan, Saeed Mahameed
From: Meir Lichtinger <meirl@nvidia.com>
commit f908a35b22180c4da64cf2647e4f5f0cd3054da7 upstream.
Add the upcoming BlueField-4 and ConnectX-8 device IDs.
Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1762,10 +1762,12 @@ static const struct pci_device_id mlx5_c
{ PCI_VDEVICE(MELLANOX, 0x101e), MLX5_PCI_DEV_IS_VF}, /* ConnectX Family mlx5Gen Virtual Function */
{ PCI_VDEVICE(MELLANOX, 0x101f) }, /* ConnectX-6 LX */
{ PCI_VDEVICE(MELLANOX, 0x1021) }, /* ConnectX-7 */
+ { PCI_VDEVICE(MELLANOX, 0x1023) }, /* ConnectX-8 */
{ PCI_VDEVICE(MELLANOX, 0xa2d2) }, /* BlueField integrated ConnectX-5 network controller */
{ PCI_VDEVICE(MELLANOX, 0xa2d3), MLX5_PCI_DEV_IS_VF}, /* BlueField integrated ConnectX-5 network controller VF */
{ PCI_VDEVICE(MELLANOX, 0xa2d6) }, /* BlueField-2 integrated ConnectX-6 Dx network controller */
{ PCI_VDEVICE(MELLANOX, 0xa2dc) }, /* BlueField-3 integrated ConnectX-7 network controller */
+ { PCI_VDEVICE(MELLANOX, 0xa2df) }, /* BlueField-4 integrated ConnectX-8 network controller */
{ 0, }
};
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 050/139] bpf: Fix crash due to incorrect copy_map_value
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 049/139] net/mlx5: Update the list of the PCI supported devices Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 051/139] bpf: Do not try bpf_msg_push_data with len 0 Greg Kroah-Hartman
` (98 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kumar Kartikeya Dwivedi, Alexei Starovoitov
From: Kumar Kartikeya Dwivedi <memxor@gmail.com>
commit a8abb0c3dc1e28454851a00f8b7333d9695d566c upstream.
When both bpf_spin_lock and bpf_timer are present in a BPF map value,
copy_map_value needs to skirt both objects when copying a value into and
out of the map. However, the current code does not set both s_off and
t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock
is placed in map value with bpf_timer, as bpf_map_update_elem call will
be able to overwrite the other timer object.
When the issue is not fixed, an overwriting can produce the following
splat:
[root@(none) bpf]# ./test_progs -t timer_crash
[ 15.930339] bpf_testmod: loading out-of-tree module taints kernel.
[ 16.037849] ==================================================================
[ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325
[ 16.039399]
[ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278
[ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014
[ 16.040485] Call Trace:
[ 16.040645] <TASK>
[ 16.040805] dump_stack_lvl+0x59/0x73
[ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.041427] kasan_report.cold+0x116/0x11b
[ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042328] ? memcpy+0x39/0x60
[ 16.042552] ? pv_hash+0xd0/0xd0
[ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0
[ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0
[ 16.043366] ? bpf_get_current_comm+0x50/0x50
[ 16.043608] ? jhash+0x11a/0x270
[ 16.043848] bpf_timer_cancel+0x34/0xe0
[ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81
[ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000
[ 16.044836] __x64_sys_nanosleep+0x5/0x140
[ 16.045119] do_syscall_64+0x59/0x80
[ 16.045377] ? lock_is_held_type+0xe4/0x140
[ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40
[ 16.046001] ? mark_held_locks+0x24/0x90
[ 16.046287] ? asm_exc_page_fault+0x1e/0x30
[ 16.046569] ? asm_exc_page_fault+0x8/0x30
[ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100
[ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 16.047405] RIP: 0033:0x7f9e4831718d
[ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023
[ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d
[ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0
[ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0
[ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30
[ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 16.051608] </TASK>
[ 16.051762] ==================================================================
Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/bpf.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -221,7 +221,8 @@ static inline void copy_map_value(struct
if (unlikely(map_value_has_spin_lock(map))) {
s_off = map->spin_lock_off;
s_sz = sizeof(struct bpf_spin_lock);
- } else if (unlikely(map_value_has_timer(map))) {
+ }
+ if (unlikely(map_value_has_timer(map))) {
t_off = map->timer_off;
t_sz = sizeof(struct bpf_timer);
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 051/139] bpf: Do not try bpf_msg_push_data with len 0
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 050/139] bpf: Fix crash due to incorrect copy_map_value Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 052/139] selftests: bpf: Check bpf_msg_push_data return value Greg Kroah-Hartman
` (97 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felix Maurer, Daniel Borkmann,
Yonghong Song, John Fastabend
From: Felix Maurer <fmaurer@redhat.com>
commit 4a11678f683814df82fca9018d964771e02d7e6d upstream.
If bpf_msg_push_data() is called with len 0 (as it happens during
selftests/bpf/test_sockmap), we do not need to do anything and can
return early.
Calling bpf_msg_push_data() with len 0 previously lead to a wrong ENOMEM
error: we later called get_order(copy + len); if len was 0, copy + len
was also often 0 and get_order() returned some undefined value (at the
moment 52). alloc_pages() caught that and failed, but then bpf_msg_push_data()
returned ENOMEM. This was wrong because we are most probably not out of
memory and actually do not need any additional memory.
Fixes: 6fff607e2f14b ("bpf: sk_msg program helper bpf_msg_push_data")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/df69012695c7094ccb1943ca02b4920db3537466.1644421921.git.fmaurer@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/filter.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2711,6 +2711,9 @@ BPF_CALL_4(bpf_msg_push_data, struct sk_
if (unlikely(flags))
return -EINVAL;
+ if (unlikely(len == 0))
+ return 0;
+
/* First find the starting scatterlist element */
i = msg->sg.start;
do {
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 052/139] selftests: bpf: Check bpf_msg_push_data return value
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 051/139] bpf: Do not try bpf_msg_push_data with len 0 Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 053/139] bpf: Fix a bpf_timer initialization issue Greg Kroah-Hartman
` (96 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felix Maurer, Alexei Starovoitov,
John Fastabend
From: Felix Maurer <fmaurer@redhat.com>
commit 61d06f01f9710b327a53492e5add9f972eb909b3 upstream.
bpf_msg_push_data may return a non-zero value to indicate an error. The
return value should be checked to prevent undetected errors.
To indicate an error, the BPF programs now perform a different action
than their intended one to make the userspace test program notice the
error, i.e., the programs supposed to pass/redirect drop, the program
supposed to drop passes.
Fixes: 84fbfe026acaa ("bpf: test_sockmap add options to use msg_push_data")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/progs/test_sockmap_kern.h | 26 ++++++++++++------
1 file changed, 18 insertions(+), 8 deletions(-)
--- a/tools/testing/selftests/bpf/progs/test_sockmap_kern.h
+++ b/tools/testing/selftests/bpf/progs/test_sockmap_kern.h
@@ -235,7 +235,7 @@ SEC("sk_msg1")
int bpf_prog4(struct sk_msg_md *msg)
{
int *bytes, zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5;
- int *start, *end, *start_push, *end_push, *start_pop, *pop;
+ int *start, *end, *start_push, *end_push, *start_pop, *pop, err = 0;
bytes = bpf_map_lookup_elem(&sock_apply_bytes, &zero);
if (bytes)
@@ -249,8 +249,11 @@ int bpf_prog4(struct sk_msg_md *msg)
bpf_msg_pull_data(msg, *start, *end, 0);
start_push = bpf_map_lookup_elem(&sock_bytes, &two);
end_push = bpf_map_lookup_elem(&sock_bytes, &three);
- if (start_push && end_push)
- bpf_msg_push_data(msg, *start_push, *end_push, 0);
+ if (start_push && end_push) {
+ err = bpf_msg_push_data(msg, *start_push, *end_push, 0);
+ if (err)
+ return SK_DROP;
+ }
start_pop = bpf_map_lookup_elem(&sock_bytes, &four);
pop = bpf_map_lookup_elem(&sock_bytes, &five);
if (start_pop && pop)
@@ -263,6 +266,7 @@ int bpf_prog6(struct sk_msg_md *msg)
{
int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5, key = 0;
int *bytes, *start, *end, *start_push, *end_push, *start_pop, *pop, *f;
+ int err = 0;
__u64 flags = 0;
bytes = bpf_map_lookup_elem(&sock_apply_bytes, &zero);
@@ -279,8 +283,11 @@ int bpf_prog6(struct sk_msg_md *msg)
start_push = bpf_map_lookup_elem(&sock_bytes, &two);
end_push = bpf_map_lookup_elem(&sock_bytes, &three);
- if (start_push && end_push)
- bpf_msg_push_data(msg, *start_push, *end_push, 0);
+ if (start_push && end_push) {
+ err = bpf_msg_push_data(msg, *start_push, *end_push, 0);
+ if (err)
+ return SK_DROP;
+ }
start_pop = bpf_map_lookup_elem(&sock_bytes, &four);
pop = bpf_map_lookup_elem(&sock_bytes, &five);
@@ -338,7 +345,7 @@ SEC("sk_msg5")
int bpf_prog10(struct sk_msg_md *msg)
{
int *bytes, *start, *end, *start_push, *end_push, *start_pop, *pop;
- int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5;
+ int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5, err = 0;
bytes = bpf_map_lookup_elem(&sock_apply_bytes, &zero);
if (bytes)
@@ -352,8 +359,11 @@ int bpf_prog10(struct sk_msg_md *msg)
bpf_msg_pull_data(msg, *start, *end, 0);
start_push = bpf_map_lookup_elem(&sock_bytes, &two);
end_push = bpf_map_lookup_elem(&sock_bytes, &three);
- if (start_push && end_push)
- bpf_msg_push_data(msg, *start_push, *end_push, 0);
+ if (start_push && end_push) {
+ err = bpf_msg_push_data(msg, *start_push, *end_push, 0);
+ if (err)
+ return SK_PASS;
+ }
start_pop = bpf_map_lookup_elem(&sock_bytes, &four);
pop = bpf_map_lookup_elem(&sock_bytes, &five);
if (start_pop && pop)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 053/139] bpf: Fix a bpf_timer initialization issue
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 052/139] selftests: bpf: Check bpf_msg_push_data return value Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 054/139] bpf: Add schedule points in batch ops Greg Kroah-Hartman
` (95 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yonghong Song, Alexei Starovoitov
From: Yonghong Song <yhs@fb.com>
commit 5eaed6eedbe9612f642ad2b880f961d1c6c8ec2b upstream.
The patch in [1] intends to fix a bpf_timer related issue,
but the fix caused existing 'timer' selftest to fail with
hang or some random errors. After some debug, I found
an issue with check_and_init_map_value() in the hashtab.c.
More specifically, in hashtab.c, we have code
l_new = bpf_map_kmalloc_node(&htab->map, ...)
check_and_init_map_value(&htab->map, l_new...)
Note that bpf_map_kmalloc_node() does not do initialization
so l_new contains random value.
The function check_and_init_map_value() intends to zero the
bpf_spin_lock and bpf_timer if they exist in the map.
But I found bpf_spin_lock is zero'ed but bpf_timer is not zero'ed.
With [1], later copy_map_value() skips copying of
bpf_spin_lock and bpf_timer. The non-zero bpf_timer caused
random failures for 'timer' selftest.
Without [1], for both bpf_spin_lock and bpf_timer case,
bpf_timer will be zero'ed, so 'timer' self test is okay.
For check_and_init_map_value(), why bpf_spin_lock is zero'ed
properly while bpf_timer not. In bpf uapi header, we have
struct bpf_spin_lock {
__u32 val;
};
struct bpf_timer {
__u64 :64;
__u64 :64;
} __attribute__((aligned(8)));
The initialization code:
*(struct bpf_spin_lock *)(dst + map->spin_lock_off) =
(struct bpf_spin_lock){};
*(struct bpf_timer *)(dst + map->timer_off) =
(struct bpf_timer){};
It appears the compiler has no obligation to initialize anonymous fields.
For example, let us use clang with bpf target as below:
$ cat t.c
struct bpf_timer {
unsigned long long :64;
};
struct bpf_timer2 {
unsigned long long a;
};
void test(struct bpf_timer *t) {
*t = (struct bpf_timer){};
}
void test2(struct bpf_timer2 *t) {
*t = (struct bpf_timer2){};
}
$ clang -target bpf -O2 -c -g t.c
$ llvm-objdump -d t.o
...
0000000000000000 <test>:
0: 95 00 00 00 00 00 00 00 exit
0000000000000008 <test2>:
1: b7 02 00 00 00 00 00 00 r2 = 0
2: 7b 21 00 00 00 00 00 00 *(u64 *)(r1 + 0) = r2
3: 95 00 00 00 00 00 00 00 exit
gcc11.2 does not have the above issue. But from
INTERNATIONAL STANDARD ©ISO/IEC ISO/IEC 9899:201x
Programming languages — C
http://www.open-std.org/Jtc1/sc22/wg14/www/docs/n1547.pdf
page 157:
Except where explicitly stated otherwise, for the purposes of
this subclause unnamed members of objects of structure and union
type do not participate in initialization. Unnamed members of
structure objects have indeterminate value even after initialization.
To fix the problem, let use memset for bpf_timer case in
check_and_init_map_value(). For consistency, memset is also
used for bpf_spin_lock case.
[1] https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com/
Fixes: 68134668c17f3 ("bpf: Add map side support for bpf timers.")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211194953.3142152-1-yhs@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/bpf.h | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -206,11 +206,9 @@ static inline bool map_value_has_timer(c
static inline void check_and_init_map_value(struct bpf_map *map, void *dst)
{
if (unlikely(map_value_has_spin_lock(map)))
- *(struct bpf_spin_lock *)(dst + map->spin_lock_off) =
- (struct bpf_spin_lock){};
+ memset(dst + map->spin_lock_off, 0, sizeof(struct bpf_spin_lock));
if (unlikely(map_value_has_timer(map)))
- *(struct bpf_timer *)(dst + map->timer_off) =
- (struct bpf_timer){};
+ memset(dst + map->timer_off, 0, sizeof(struct bpf_timer));
}
/* copy everything but bpf_spin_lock and bpf_timer. There could be one of each. */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 054/139] bpf: Add schedule points in batch ops
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 053/139] bpf: Fix a bpf_timer initialization issue Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 055/139] io_uring: add a schedule point in io_add_buffers() Greg Kroah-Hartman
` (94 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot, Eric Dumazet,
Alexei Starovoitov, Stanislav Fomichev, Brian Vazquez
From: Eric Dumazet <edumazet@google.com>
commit 75134f16e7dd0007aa474b281935c5f42e79f2c8 upstream.
syzbot reported various soft lockups caused by bpf batch operations.
INFO: task kworker/1:1:27 blocked for more than 140 seconds.
INFO: task hung in rcu_barrier
Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.
Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.
This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner.
Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops")
Fixes: cb4d03ab499d ("bpf: Add generic support for lookup batch op")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/syscall.c | 3 +++
1 file changed, 3 insertions(+)
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1337,6 +1337,7 @@ int generic_map_delete_batch(struct bpf_
maybe_wait_bpf_programs(map);
if (err)
break;
+ cond_resched();
}
if (copy_to_user(&uattr->batch.count, &cp, sizeof(cp)))
err = -EFAULT;
@@ -1394,6 +1395,7 @@ int generic_map_update_batch(struct bpf_
if (err)
break;
+ cond_resched();
}
if (copy_to_user(&uattr->batch.count, &cp, sizeof(cp)))
@@ -1491,6 +1493,7 @@ int generic_map_lookup_batch(struct bpf_
swap(prev_key, key);
retry = MAP_LOOKUP_RETRIES;
cp++;
+ cond_resched();
}
if (err == -EFAULT)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 055/139] io_uring: add a schedule point in io_add_buffers()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 054/139] bpf: Add schedule points in batch ops Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 056/139] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends Greg Kroah-Hartman
` (93 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Jens Axboe,
Pavel Begunkov, io-uring, syzbot
From: Eric Dumazet <edumazet@google.com>
commit f240762f88b4b1b58561939ffd44837759756477 upstream.
Looping ~65535 times doing kmalloc() calls can trigger soft lockups,
especially with DEBUG features (like KASAN).
[ 253.536212] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [b219417889:12575]
[ 253.544433] Modules linked in: vfat fat i2c_mux_pca954x i2c_mux spidev cdc_acm xhci_pci xhci_hcd sha3_generic gq(O)
[ 253.544451] CPU: 64 PID: 12575 Comm: b219417889 Tainted: G S O 5.17.0-smp-DEV #801
[ 253.544457] RIP: 0010:kernel_text_address (./include/asm-generic/sections.h:192 ./include/linux/kallsyms.h:29 kernel/extable.c:67 kernel/extable.c:98)
[ 253.544464] Code: 0f 93 c0 48 c7 c1 e0 63 d7 a4 48 39 cb 0f 92 c1 20 c1 0f b6 c1 5b 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 fb <48> c7 c0 00 00 80 a0 41 be 01 00 00 00 48 39 c7 72 0c 48 c7 c0 40
[ 253.544468] RSP: 0018:ffff8882d8baf4c0 EFLAGS: 00000246
[ 253.544471] RAX: 1ffff1105b175e00 RBX: ffffffffa13ef09a RCX: 00000000a13ef001
[ 253.544474] RDX: ffffffffa13ef09a RSI: ffff8882d8baf558 RDI: ffffffffa13ef09a
[ 253.544476] RBP: ffff8882d8baf4d8 R08: ffff8882d8baf5e0 R09: 0000000000000004
[ 253.544479] R10: ffff8882d8baf5e8 R11: ffffffffa0d59a50 R12: ffff8882eab20380
[ 253.544481] R13: ffffffffa0d59a50 R14: dffffc0000000000 R15: 1ffff1105b175eb0
[ 253.544483] FS: 00000000016d3380(0000) GS:ffff88af48c00000(0000) knlGS:0000000000000000
[ 253.544486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 253.544488] CR2: 00000000004af0f0 CR3: 00000002eabfa004 CR4: 00000000003706e0
[ 253.544491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 253.544492] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 253.544494] Call Trace:
[ 253.544496] <TASK>
[ 253.544498] ? io_queue_sqe (fs/io_uring.c:7143)
[ 253.544505] __kernel_text_address (kernel/extable.c:78)
[ 253.544508] unwind_get_return_address (arch/x86/kernel/unwind_frame.c:19)
[ 253.544514] arch_stack_walk (arch/x86/kernel/stacktrace.c:27)
[ 253.544517] ? io_queue_sqe (fs/io_uring.c:7143)
[ 253.544521] stack_trace_save (kernel/stacktrace.c:123)
[ 253.544527] ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515)
[ 253.544531] ? ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515)
[ 253.544533] ? __kasan_kmalloc (mm/kasan/common.c:524)
[ 253.544535] ? kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567)
[ 253.544541] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544544] ? __io_queue_sqe (fs/io_uring.c:?)
[ 253.544551] __kasan_kmalloc (mm/kasan/common.c:524)
[ 253.544553] kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567)
[ 253.544556] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544560] io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828)
[ 253.544564] ? __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
[ 253.544567] ? __kasan_slab_alloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
[ 253.544569] ? kmem_cache_alloc_bulk (mm/slab.h:732 mm/slab.c:3546)
[ 253.544573] ? __io_alloc_req_refill (fs/io_uring.c:2078)
[ 253.544578] ? io_submit_sqes (fs/io_uring.c:7441)
[ 253.544581] ? __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096)
[ 253.544584] ? __x64_sys_io_uring_enter (fs/io_uring.c:10096)
[ 253.544587] ? do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 253.544590] ? entry_SYSCALL_64_after_hwframe (??:?)
[ 253.544596] __io_queue_sqe (fs/io_uring.c:?)
[ 253.544600] io_queue_sqe (fs/io_uring.c:7143)
[ 253.544603] io_submit_sqe (fs/io_uring.c:?)
[ 253.544608] io_submit_sqes (fs/io_uring.c:?)
[ 253.544612] __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096)
[ 253.544616] __x64_sys_io_uring_enter (fs/io_uring.c:10096)
[ 253.544619] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 253.544623] entry_SYSCALL_64_after_hwframe (??:?)
Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: io-uring <io-uring@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220215041003.2394784-1-eric.dumazet@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/io_uring.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -4454,6 +4454,7 @@ static int io_add_buffers(struct io_prov
} else {
list_add_tail(&buf->list, &(*head)->list);
}
+ cond_resched();
}
return i ? i : -ENOMEM;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 056/139] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 055/139] io_uring: add a schedule point in io_add_buffers() Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 057/139] nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info Greg Kroah-Hartman
` (92 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Jakub Kicinski
From: Eric Dumazet <edumazet@google.com>
commit ef527f968ae05c6717c39f49c8709a7e2c19183a upstream.
Whenever one of these functions pull all data from an skb in a frag_list,
use consume_skb() instead of kfree_skb() to avoid polluting drop
monitoring.
Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220220154052.1308469-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/skbuff.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2254,7 +2254,7 @@ void *__pskb_pull_tail(struct sk_buff *s
/* Free pulled out fragments. */
while ((list = skb_shinfo(skb)->frag_list) != insp) {
skb_shinfo(skb)->frag_list = list->next;
- kfree_skb(list);
+ consume_skb(list);
}
/* And insert new clone at head. */
if (clone) {
@@ -6220,7 +6220,7 @@ static int pskb_carve_frag_list(struct s
/* Free pulled out fragments. */
while ((list = shinfo->frag_list) != insp) {
shinfo->frag_list = list->next;
- kfree_skb(list);
+ consume_skb(list);
}
/* And insert new clone at head. */
if (clone) {
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 057/139] nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 056/139] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 058/139] tipc: Fix end of loop tests for list_for_each_entry() Greg Kroah-Hartman
` (91 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kanchan Joshi, Christoph Hellwig,
Sagi Grimberg, Daniel Wagner
From: Christoph Hellwig <hch@lst.de>
commit 602e57c9799c19f27e440639deed3ec45cfe1651 upstream.
Commit e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses
to check if a path can be used or not. We also need to set this flag
for devices that fail the ZNS feature validation and which are available
through passthrough devices only to that they can be used in multipathing
setups.
Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Reported-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nvme/host/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1914,7 +1914,7 @@ static int nvme_update_ns_info(struct nv
if (blk_queue_is_zoned(ns->queue)) {
ret = nvme_revalidate_zones(ns);
if (ret && !nvme_first_scan(ns->disk))
- goto out;
+ return ret;
}
if (nvme_ns_head_multipath(ns->head)) {
@@ -1929,16 +1929,16 @@ static int nvme_update_ns_info(struct nv
return 0;
out_unfreeze:
- blk_mq_unfreeze_queue(ns->disk->queue);
-out:
/*
* If probing fails due an unsupported feature, hide the block device,
* but still allow other access.
*/
if (ret == -ENODEV) {
ns->disk->flags |= GENHD_FL_HIDDEN;
+ set_bit(NVME_NS_READY, &ns->flags);
ret = 0;
}
+ blk_mq_unfreeze_queue(ns->disk->queue);
return ret;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 058/139] tipc: Fix end of loop tests for list_for_each_entry()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 057/139] nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 059/139] gso: do not skip outer ip header in case of ipip and net_failover Greg Kroah-Hartman
` (90 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, David S. Miller
From: Dan Carpenter <dan.carpenter@oracle.com>
commit a1f8fec4dac8bc7b172b2bdbd881e015261a6322 upstream.
These tests are supposed to check if the loop exited via a break or not.
However the tests are wrong because if we did not exit via a break then
"p" is not a valid pointer. In that case, it's the equivalent of
"if (*(u32 *)sr == *last_key) {". That's going to work most of the time,
but there is a potential for those to be equal.
Fixes: 1593123a6a49 ("tipc: add name table dump to new netlink api")
Fixes: 1a1a143daf84 ("tipc: add publication dump to new netlink api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/name_table.c | 2 +-
net/tipc/socket.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/tipc/name_table.c
+++ b/net/tipc/name_table.c
@@ -967,7 +967,7 @@ static int __tipc_nl_add_nametable_publ(
list_for_each_entry(p, &sr->all_publ, all_publ)
if (p->key == *last_key)
break;
- if (p->key != *last_key)
+ if (list_entry_is_head(p, &sr->all_publ, all_publ))
return -EPIPE;
} else {
p = list_first_entry(&sr->all_publ,
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -3749,7 +3749,7 @@ static int __tipc_nl_list_sk_publ(struct
if (p->key == *last_publ)
break;
}
- if (p->key != *last_publ) {
+ if (list_entry_is_head(p, &tsk->publications, binding_sock)) {
/* We never set seq or call nl_dump_check_consistent()
* this means that setting prev_seq here will cause the
* consistence check to fail in the netlink callback
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 059/139] gso: do not skip outer ip header in case of ipip and net_failover
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 058/139] tipc: Fix end of loop tests for list_for_each_entry() Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 060/139] net: mv643xx_eth: process retval from of_get_mac_address Greg Kroah-Hartman
` (89 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tao Liu, Willem de Bruijn, David S. Miller
From: Tao Liu <thomas.liu@ucloud.cn>
commit cc20cced0598d9a5ff91ae4ab147b3b5e99ee819 upstream.
We encounter a tcp drop issue in our cloud environment. Packet GROed in
host forwards to a VM virtio_net nic with net_failover enabled. VM acts
as a IPVS LB with ipip encapsulation. The full path like:
host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat
-> ipip encap -> net_failover tx -> virtio_net tx
When net_failover transmits a ipip pkt (gso_type = 0x0103, which means
SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso
did because it supports TSO and GSO_IPXIP4. But network_header points to
inner ip header.
Call Trace:
tcp4_gso_segment ------> return NULL
inet_gso_segment ------> inner iph, network_header points to
ipip_gso_segment
inet_gso_segment ------> outer iph
skb_mac_gso_segment
Afterwards virtio_net transmits the pkt, only inner ip header is modified.
And the outer one just keeps unchanged. The pkt will be dropped in remote
host.
Call Trace:
inet_gso_segment ------> inner iph, outer iph is skipped
skb_mac_gso_segment
__skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
__qdisc_run
__dev_queue_xmit ------> virtio_net
dev_hard_start_xmit
__dev_queue_xmit ------> net_failover
ip_finish_output2
ip_output
iptunnel_xmit
ip_tunnel_xmit
ipip_tunnel_xmit ------> ipip
dev_hard_start_xmit
__dev_queue_xmit
ip_finish_output2
ip_output
ip_forward
ip_rcv
__netif_receive_skb_one_core
netif_receive_skb_internal
napi_gro_receive
receive_buf
virtnet_poll
net_rx_action
The root cause of this issue is specific with the rare combination of
SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option.
SKB_GSO_DODGY is set from external virtio_net. We need to reset network
header when callbacks.gso_segment() returns NULL.
This patch also includes ipv6_gso_segment(), considering SIT, etc.
Fixes: cb32f511a70b ("ipip: add GSO/TSO support")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/af_inet.c | 5 ++++-
net/ipv6/ip6_offload.c | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1380,8 +1380,11 @@ struct sk_buff *inet_gso_segment(struct
}
ops = rcu_dereference(inet_offloads[proto]);
- if (likely(ops && ops->callbacks.gso_segment))
+ if (likely(ops && ops->callbacks.gso_segment)) {
segs = ops->callbacks.gso_segment(skb, features);
+ if (!segs)
+ skb->network_header = skb_mac_header(skb) + nhoff - skb->head;
+ }
if (IS_ERR_OR_NULL(segs))
goto out;
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -114,6 +114,8 @@ static struct sk_buff *ipv6_gso_segment(
if (likely(ops && ops->callbacks.gso_segment)) {
skb_reset_transport_header(skb);
segs = ops->callbacks.gso_segment(skb, features);
+ if (!segs)
+ skb->network_header = skb_mac_header(skb) + nhoff - skb->head;
}
if (IS_ERR_OR_NULL(segs))
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 060/139] net: mv643xx_eth: process retval from of_get_mac_address
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 059/139] gso: do not skip outer ip header in case of ipip and net_failover Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 061/139] openvswitch: Fix setting ipv6 fields causing hw csum failure Greg Kroah-Hartman
` (88 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mauri Sandberg, Andrew Lunn, Jakub Kicinski
From: Mauri Sandberg <maukka@ext.kapsi.fi>
commit 42404d8f1c01861b22ccfa1d70f950242720ae57 upstream.
Obtaining a MAC address may be deferred in cases when the MAC is stored
in an NVMEM block, for example, and it may not be ready upon the first
retrieval attempt and return EPROBE_DEFER.
It is also possible that a port that does not rely on NVMEM has been
already created when getting the defer request. Thus, also the resources
allocated previously must be freed when doing a roll-back.
Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/marvell/mv643xx_eth.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2700,6 +2700,16 @@ MODULE_DEVICE_TABLE(of, mv643xx_eth_shar
static struct platform_device *port_platdev[3];
+static void mv643xx_eth_shared_of_remove(void)
+{
+ int n;
+
+ for (n = 0; n < 3; n++) {
+ platform_device_del(port_platdev[n]);
+ port_platdev[n] = NULL;
+ }
+}
+
static int mv643xx_eth_shared_of_add_port(struct platform_device *pdev,
struct device_node *pnp)
{
@@ -2736,7 +2746,9 @@ static int mv643xx_eth_shared_of_add_por
return -EINVAL;
}
- of_get_mac_address(pnp, ppd.mac_addr);
+ ret = of_get_mac_address(pnp, ppd.mac_addr);
+ if (ret)
+ return ret;
mv643xx_eth_property(pnp, "tx-queue-size", ppd.tx_queue_size);
mv643xx_eth_property(pnp, "tx-sram-addr", ppd.tx_sram_addr);
@@ -2800,21 +2812,13 @@ static int mv643xx_eth_shared_of_probe(s
ret = mv643xx_eth_shared_of_add_port(pdev, pnp);
if (ret) {
of_node_put(pnp);
+ mv643xx_eth_shared_of_remove();
return ret;
}
}
return 0;
}
-static void mv643xx_eth_shared_of_remove(void)
-{
- int n;
-
- for (n = 0; n < 3; n++) {
- platform_device_del(port_platdev[n]);
- port_platdev[n] = NULL;
- }
-}
#else
static inline int mv643xx_eth_shared_of_probe(struct platform_device *pdev)
{
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 061/139] openvswitch: Fix setting ipv6 fields causing hw csum failure
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 060/139] net: mv643xx_eth: process retval from of_get_mac_address Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 062/139] drm/edid: Always set RGB444 Greg Kroah-Hartman
` (87 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Blakey, Jakub Kicinski
From: Paul Blakey <paulb@nvidia.com>
commit d9b5ae5c1b241b91480aa30408be12fe91af834a upstream.
Ipv6 ttl, label and tos fields are modified without first
pulling/pushing the ipv6 header, which would have updated
the hw csum (if available). This might cause csum validation
when sending the packet to the stack, as can be seen in
the trace below.
Fix this by updating skb->csum if available.
Trace resulted by ipv6 ttl dec and then sending packet
to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]:
[295241.900063] s_pf0vf2: hw csum failure
[295241.923191] Call Trace:
[295241.925728] <IRQ>
[295241.927836] dump_stack+0x5c/0x80
[295241.931240] __skb_checksum_complete+0xac/0xc0
[295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack]
[295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack]
[295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch]
[295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch]
[295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch]
[295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch]
[295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch]
[295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch]
[295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch]
[295242.034074] __netif_receive_skb_core+0x2ca/0xcb0
[295242.047498] netif_receive_skb_internal+0x3e/0xc0
[295242.052291] napi_gro_receive+0xba/0xe0
[295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core]
[295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core]
[295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core]
[295242.077958] net_rx_action+0x149/0x3b0
[295242.086762] __do_softirq+0xd7/0x2d6
[295242.090427] irq_exit+0xf7/0x100
[295242.093748] do_IRQ+0x7f/0xd0
[295242.096806] common_interrupt+0xf/0xf
[295242.100559] </IRQ>
[295242.102750] RIP: 0033:0x7f9022e88cbd
[295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
[295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000
[295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30
[295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340
[295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000
[295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40
Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/checksum.h | 5 +++++
net/openvswitch/actions.c | 46 ++++++++++++++++++++++++++++++++++++++--------
2 files changed, 43 insertions(+), 8 deletions(-)
--- a/include/net/checksum.h
+++ b/include/net/checksum.h
@@ -141,6 +141,11 @@ static inline void csum_replace2(__sum16
*sum = ~csum16_add(csum16_sub(~(*sum), old), new);
}
+static inline void csum_replace(__wsum *csum, __wsum old, __wsum new)
+{
+ *csum = csum_add(csum_sub(*csum, old), new);
+}
+
struct sk_buff;
void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
__be32 from, __be32 to, bool pseudohdr);
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -423,12 +423,43 @@ static void set_ipv6_addr(struct sk_buff
memcpy(addr, new_addr, sizeof(__be32[4]));
}
-static void set_ipv6_fl(struct ipv6hdr *nh, u32 fl, u32 mask)
+static void set_ipv6_dsfield(struct sk_buff *skb, struct ipv6hdr *nh, u8 ipv6_tclass, u8 mask)
{
+ u8 old_ipv6_tclass = ipv6_get_dsfield(nh);
+
+ ipv6_tclass = OVS_MASKED(old_ipv6_tclass, ipv6_tclass, mask);
+
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ csum_replace(&skb->csum, (__force __wsum)(old_ipv6_tclass << 12),
+ (__force __wsum)(ipv6_tclass << 12));
+
+ ipv6_change_dsfield(nh, ~mask, ipv6_tclass);
+}
+
+static void set_ipv6_fl(struct sk_buff *skb, struct ipv6hdr *nh, u32 fl, u32 mask)
+{
+ u32 ofl;
+
+ ofl = nh->flow_lbl[0] << 16 | nh->flow_lbl[1] << 8 | nh->flow_lbl[2];
+ fl = OVS_MASKED(ofl, fl, mask);
+
/* Bits 21-24 are always unmasked, so this retains their values. */
- OVS_SET_MASKED(nh->flow_lbl[0], (u8)(fl >> 16), (u8)(mask >> 16));
- OVS_SET_MASKED(nh->flow_lbl[1], (u8)(fl >> 8), (u8)(mask >> 8));
- OVS_SET_MASKED(nh->flow_lbl[2], (u8)fl, (u8)mask);
+ nh->flow_lbl[0] = (u8)(fl >> 16);
+ nh->flow_lbl[1] = (u8)(fl >> 8);
+ nh->flow_lbl[2] = (u8)fl;
+
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ csum_replace(&skb->csum, (__force __wsum)htonl(ofl), (__force __wsum)htonl(fl));
+}
+
+static void set_ipv6_ttl(struct sk_buff *skb, struct ipv6hdr *nh, u8 new_ttl, u8 mask)
+{
+ new_ttl = OVS_MASKED(nh->hop_limit, new_ttl, mask);
+
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ csum_replace(&skb->csum, (__force __wsum)(nh->hop_limit << 8),
+ (__force __wsum)(new_ttl << 8));
+ nh->hop_limit = new_ttl;
}
static void set_ip_ttl(struct sk_buff *skb, struct iphdr *nh, u8 new_ttl,
@@ -546,18 +577,17 @@ static int set_ipv6(struct sk_buff *skb,
}
}
if (mask->ipv6_tclass) {
- ipv6_change_dsfield(nh, ~mask->ipv6_tclass, key->ipv6_tclass);
+ set_ipv6_dsfield(skb, nh, key->ipv6_tclass, mask->ipv6_tclass);
flow_key->ip.tos = ipv6_get_dsfield(nh);
}
if (mask->ipv6_label) {
- set_ipv6_fl(nh, ntohl(key->ipv6_label),
+ set_ipv6_fl(skb, nh, ntohl(key->ipv6_label),
ntohl(mask->ipv6_label));
flow_key->ipv6.label =
*(__be32 *)nh & htonl(IPV6_FLOWINFO_FLOWLABEL);
}
if (mask->ipv6_hlimit) {
- OVS_SET_MASKED(nh->hop_limit, key->ipv6_hlimit,
- mask->ipv6_hlimit);
+ set_ipv6_ttl(skb, nh, key->ipv6_hlimit, mask->ipv6_hlimit);
flow_key->ip.ttl = nh->hop_limit;
}
return 0;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 062/139] drm/edid: Always set RGB444
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 061/139] openvswitch: Fix setting ipv6 fields causing hw csum failure Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 063/139] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure Greg Kroah-Hartman
` (86 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä,
Matthias Reichl, Maxime Ripard
From: Maxime Ripard <maxime@cerno.tech>
commit ecbd4912a693b862e25cba0a6990a8c95b00721e upstream.
In order to fill the drm_display_info structure each time an EDID is
read, the code currently will call drm_add_display_info with the parsed
EDID.
drm_add_display_info will then call drm_reset_display_info to reset all
the fields to 0, and then set them to the proper value depending on the
EDID.
In the color_formats case, we will thus report that we don't support any
color format, and then fill it back with RGB444 plus the additional
formats described in the EDID Feature Support byte.
However, since that byte only contains format-related bits since the 1.4
specification, this doesn't happen if the EDID is following an earlier
specification. In turn, it means that for one of these EDID, we end up
with color_formats set to 0.
The EDID 1.3 specification never really specifies what it means by RGB
exactly, but since both HDMI and DVI will use RGB444, it's fairly safe
to assume it's supposed to be RGB444.
Let's move the addition of RGB444 to color_formats earlier in
drm_add_display_info() so that it's always set for a digital display.
Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_edid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5205,6 +5205,7 @@ u32 drm_add_display_info(struct drm_conn
if (!(edid->input & DRM_EDID_INPUT_DIGITAL))
return quirks;
+ info->color_formats |= DRM_COLOR_FORMAT_RGB444;
drm_parse_cea_ext(connector, edid);
/*
@@ -5253,7 +5254,6 @@ u32 drm_add_display_info(struct drm_conn
DRM_DEBUG("%s: Assigning EDID-1.4 digital sink color depth as %d bpc.\n",
connector->name, info->bpc);
- info->color_formats |= DRM_COLOR_FORMAT_RGB444;
if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444)
info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 063/139] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 062/139] drm/edid: Always set RGB444 Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 064/139] drm/vc4: crtc: Fix runtime_pm reference counting Greg Kroah-Hartman
` (85 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gal Pressman, Tariq Toukan, Saeed Mahameed
From: Gal Pressman <gal@nvidia.com>
commit 0b89429722353d112f8b8b29ca397e95fa994d27 upstream.
The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.
Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1754,7 +1754,7 @@ static int mlx5e_get_module_eeprom(struc
if (size_read < 0) {
netdev_err(priv->netdev, "%s: mlx5_query_eeprom failed:0x%x\n",
__func__, size_read);
- return 0;
+ return size_read;
}
i += size_read;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 064/139] drm/vc4: crtc: Fix runtime_pm reference counting
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 063/139] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 5.15 065/139] drm/i915/dg2: Print PHY name properly on calibration error Greg Kroah-Hartman
` (84 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maxime Ripard, Javier Martinez Canillas
From: Maxime Ripard <maxime@cerno.tech>
commit 6764eb690e77ecded48587d6d4e346ba2e196546 upstream.
At boot on the BCM2711, if the HDMI controllers are running, the CRTC
driver will disable itself and its associated HDMI controller to work
around a hardware bug that would leave some pixels stuck in a FIFO.
In order to avoid that issue, we need to run some operations in lockstep
between the CRTC and HDMI controller, and we need to make sure the HDMI
controller will be powered properly.
However, since we haven't enabled it through KMS, the runtime_pm state
is off at this point so we need to make sure the device is powered
through pm_runtime_resume_and_get, and once the operations are complete,
we call pm_runtime_put.
However, the HDMI controller will do that itself in its
post_crtc_powerdown, which means we'll end up calling pm_runtime_put for
a single pm_runtime_get, throwing the reference counting off. Let's
remove the pm_runtime_put call in the CRTC code in order to have the
proper counting.
Fixes: bca10db67bda ("drm/vc4: crtc: Make sure the HDMI controller is powered when disabling")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203102003.1114673-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -538,9 +538,11 @@ int vc4_crtc_disable_at_boot(struct drm_
if (ret)
return ret;
- ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
- if (ret)
- return ret;
+ /*
+ * post_crtc_powerdown will have called pm_runtime_put, so we
+ * don't need it here otherwise we'll get the reference counting
+ * wrong.
+ */
return 0;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 065/139] drm/i915/dg2: Print PHY name properly on calibration error
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 064/139] drm/vc4: crtc: Fix runtime_pm reference counting Greg Kroah-Hartman
@ 2022-02-28 17:23 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 066/139] net/sched: act_ct: Fix flow table lookup after ct clear or switching zones Greg Kroah-Hartman
` (83 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:23 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matt Roper, Swathi Dhanavanthri,
Tvrtko Ursulin
From: Matt Roper <matthew.d.roper@intel.com>
commit 28adef861233c6fce47372ebd2070b55eaa8e899 upstream.
We need to use phy_name() to convert the PHY value into a human-readable
character in the error message.
Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215163545.2175730-1-matthew.d.roper@intel.com
(cherry picked from commit 84073e568eec7b586b2f6fd5fb2fb08f59edec54)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/display/intel_snps_phy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/display/intel_snps_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_snps_phy.c
@@ -32,7 +32,7 @@ void intel_snps_phy_wait_for_calibration
if (intel_de_wait_for_clear(dev_priv, ICL_PHY_MISC(phy),
DG2_PHY_DP_TX_ACK_MASK, 25))
DRM_ERROR("SNPS PHY %c failed to calibrate after 25ms.\n",
- phy);
+ phy_name(phy));
}
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 066/139] net/sched: act_ct: Fix flow table lookup after ct clear or switching zones
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2022-02-28 17:23 ` [PATCH 5.15 065/139] drm/i915/dg2: Print PHY name properly on calibration error Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 067/139] net: ll_temac: check the return value of devm_kmalloc() Greg Kroah-Hartman
` (82 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Blakey, Marcelo Ricardo Leitner,
David S. Miller
From: Paul Blakey <paulb@nvidia.com>
commit 2f131de361f6d0eaff17db26efdb844c178432f8 upstream.
Flow table lookup is skipped if packet either went through ct clear
action (which set the IP_CT_UNTRACKED flag on the packet), or while
switching zones and there is already a connection associated with
the packet. This will result in no SW offload of the connection,
and the and connection not being removed from flow table with
TCP teardown (fin/rst packet).
To fix the above, remove these unneccary checks in flow
table lookup.
Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/act_ct.c | 5 -----
1 file changed, 5 deletions(-)
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -516,11 +516,6 @@ static bool tcf_ct_flow_table_lookup(str
struct nf_conn *ct;
u8 dir;
- /* Previously seen or loopback */
- ct = nf_ct_get(skb, &ctinfo);
- if ((ct && !nf_ct_is_template(ct)) || ctinfo == IP_CT_UNTRACKED)
- return false;
-
switch (family) {
case NFPROTO_IPV4:
if (!tcf_ct_flow_table_fill_tuple_ipv4(skb, &tuple, &tcph))
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 067/139] net: ll_temac: check the return value of devm_kmalloc()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 066/139] net/sched: act_ct: Fix flow table lookup after ct clear or switching zones Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 068/139] net: Force inlining of checksum functions in net/checksum.h Greg Kroah-Hartman
` (81 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Xiaoke Wang, David S. Miller
From: Xiaoke Wang <xkernel.wang@foxmail.com>
commit b352c3465bb808ab700d03f5bac2f7a6f37c5350 upstream.
devm_kmalloc() returns a pointer to allocated memory on success, NULL
on failure. While lp->indirect_lock is allocated by devm_kmalloc()
without proper check. It is better to check the value of it to
prevent potential wrong memory access.
Fixes: f14f5c11f051 ("net: ll_temac: Support indirect_mutex share within TEMAC IP")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -1427,6 +1427,8 @@ static int temac_probe(struct platform_d
lp->indirect_lock = devm_kmalloc(&pdev->dev,
sizeof(*lp->indirect_lock),
GFP_KERNEL);
+ if (!lp->indirect_lock)
+ return -ENOMEM;
spin_lock_init(lp->indirect_lock);
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 068/139] net: Force inlining of checksum functions in net/checksum.h
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 067/139] net: ll_temac: check the return value of devm_kmalloc() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 069/139] netfilter: nf_tables: unregister flowtable hooks on netns exit Greg Kroah-Hartman
` (80 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Nick Desaulniers,
Andrew Morton, Christophe Leroy, David S. Miller
From: Christophe Leroy <christophe.leroy@csgroup.eu>
commit 5486f5bf790b5c664913076c3194b8f916a5c7ad upstream.
All functions defined as static inline in net/checksum.h are
meant to be inlined for performance reason.
But since commit ac7c3e4ff401 ("compiler: enable
CONFIG_OPTIMIZE_INLINING forcibly") the compiler is allowed to
uninline functions when it wants.
Fair enough in the general case, but for tiny performance critical
checksum helpers that's counter-productive.
The problem mainly arises when selecting CONFIG_CC_OPTIMISE_FOR_SIZE,
Those helpers being 'static inline' in header files you suddenly find
them duplicated many times in the resulting vmlinux.
Here is a typical exemple when building powerpc pmac32_defconfig
with CONFIG_CC_OPTIMISE_FOR_SIZE. csum_sub() appears 4 times:
c04a23cc <csum_sub>:
c04a23cc: 7c 84 20 f8 not r4,r4
c04a23d0: 7c 63 20 14 addc r3,r3,r4
c04a23d4: 7c 63 01 94 addze r3,r3
c04a23d8: 4e 80 00 20 blr
...
c04a2ce8: 4b ff f6 e5 bl c04a23cc <csum_sub>
...
c04a2d2c: 4b ff f6 a1 bl c04a23cc <csum_sub>
...
c04a2d54: 4b ff f6 79 bl c04a23cc <csum_sub>
...
c04a754c <csum_sub>:
c04a754c: 7c 84 20 f8 not r4,r4
c04a7550: 7c 63 20 14 addc r3,r3,r4
c04a7554: 7c 63 01 94 addze r3,r3
c04a7558: 4e 80 00 20 blr
...
c04ac930: 4b ff ac 1d bl c04a754c <csum_sub>
...
c04ad264: 4b ff a2 e9 bl c04a754c <csum_sub>
...
c04e3b08 <csum_sub>:
c04e3b08: 7c 84 20 f8 not r4,r4
c04e3b0c: 7c 63 20 14 addc r3,r3,r4
c04e3b10: 7c 63 01 94 addze r3,r3
c04e3b14: 4e 80 00 20 blr
...
c04e5788: 4b ff e3 81 bl c04e3b08 <csum_sub>
...
c04e65c8: 4b ff d5 41 bl c04e3b08 <csum_sub>
...
c0512d34 <csum_sub>:
c0512d34: 7c 84 20 f8 not r4,r4
c0512d38: 7c 63 20 14 addc r3,r3,r4
c0512d3c: 7c 63 01 94 addze r3,r3
c0512d40: 4e 80 00 20 blr
...
c0512dfc: 4b ff ff 39 bl c0512d34 <csum_sub>
...
c05138bc: 4b ff f4 79 bl c0512d34 <csum_sub>
...
Restore the expected behaviour by using __always_inline for all
functions defined in net/checksum.h
vmlinux size is even reduced by 256 bytes with this patch:
text data bss dec hex filename
6980022 2515362 194384 9689768 93daa8 vmlinux.before
6979862 2515266 194384 9689512 93d9a8 vmlinux.now
Fixes: ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly")
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/checksum.h | 45 +++++++++++++++++++++++----------------------
1 file changed, 23 insertions(+), 22 deletions(-)
--- a/include/net/checksum.h
+++ b/include/net/checksum.h
@@ -22,7 +22,7 @@
#include <asm/checksum.h>
#ifndef _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
-static inline
+static __always_inline
__wsum csum_and_copy_from_user (const void __user *src, void *dst,
int len)
{
@@ -33,7 +33,7 @@ __wsum csum_and_copy_from_user (const vo
#endif
#ifndef HAVE_CSUM_COPY_USER
-static __inline__ __wsum csum_and_copy_to_user
+static __always_inline __wsum csum_and_copy_to_user
(const void *src, void __user *dst, int len)
{
__wsum sum = csum_partial(src, len, ~0U);
@@ -45,7 +45,7 @@ static __inline__ __wsum csum_and_copy_t
#endif
#ifndef _HAVE_ARCH_CSUM_AND_COPY
-static inline __wsum
+static __always_inline __wsum
csum_partial_copy_nocheck(const void *src, void *dst, int len)
{
memcpy(dst, src, len);
@@ -54,7 +54,7 @@ csum_partial_copy_nocheck(const void *sr
#endif
#ifndef HAVE_ARCH_CSUM_ADD
-static inline __wsum csum_add(__wsum csum, __wsum addend)
+static __always_inline __wsum csum_add(__wsum csum, __wsum addend)
{
u32 res = (__force u32)csum;
res += (__force u32)addend;
@@ -62,12 +62,12 @@ static inline __wsum csum_add(__wsum csu
}
#endif
-static inline __wsum csum_sub(__wsum csum, __wsum addend)
+static __always_inline __wsum csum_sub(__wsum csum, __wsum addend)
{
return csum_add(csum, ~addend);
}
-static inline __sum16 csum16_add(__sum16 csum, __be16 addend)
+static __always_inline __sum16 csum16_add(__sum16 csum, __be16 addend)
{
u16 res = (__force u16)csum;
@@ -75,12 +75,12 @@ static inline __sum16 csum16_add(__sum16
return (__force __sum16)(res + (res < (__force u16)addend));
}
-static inline __sum16 csum16_sub(__sum16 csum, __be16 addend)
+static __always_inline __sum16 csum16_sub(__sum16 csum, __be16 addend)
{
return csum16_add(csum, ~addend);
}
-static inline __wsum csum_shift(__wsum sum, int offset)
+static __always_inline __wsum csum_shift(__wsum sum, int offset)
{
/* rotate sum to align it with a 16b boundary */
if (offset & 1)
@@ -88,42 +88,43 @@ static inline __wsum csum_shift(__wsum s
return sum;
}
-static inline __wsum
+static __always_inline __wsum
csum_block_add(__wsum csum, __wsum csum2, int offset)
{
return csum_add(csum, csum_shift(csum2, offset));
}
-static inline __wsum
+static __always_inline __wsum
csum_block_add_ext(__wsum csum, __wsum csum2, int offset, int len)
{
return csum_block_add(csum, csum2, offset);
}
-static inline __wsum
+static __always_inline __wsum
csum_block_sub(__wsum csum, __wsum csum2, int offset)
{
return csum_block_add(csum, ~csum2, offset);
}
-static inline __wsum csum_unfold(__sum16 n)
+static __always_inline __wsum csum_unfold(__sum16 n)
{
return (__force __wsum)n;
}
-static inline __wsum csum_partial_ext(const void *buff, int len, __wsum sum)
+static __always_inline
+__wsum csum_partial_ext(const void *buff, int len, __wsum sum)
{
return csum_partial(buff, len, sum);
}
#define CSUM_MANGLED_0 ((__force __sum16)0xffff)
-static inline void csum_replace_by_diff(__sum16 *sum, __wsum diff)
+static __always_inline void csum_replace_by_diff(__sum16 *sum, __wsum diff)
{
*sum = csum_fold(csum_add(diff, ~csum_unfold(*sum)));
}
-static inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to)
+static __always_inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to)
{
__wsum tmp = csum_sub(~csum_unfold(*sum), (__force __wsum)from);
@@ -136,7 +137,7 @@ static inline void csum_replace4(__sum16
* m : old value of a 16bit field
* m' : new value of a 16bit field
*/
-static inline void csum_replace2(__sum16 *sum, __be16 old, __be16 new)
+static __always_inline void csum_replace2(__sum16 *sum, __be16 old, __be16 new)
{
*sum = ~csum16_add(csum16_sub(~(*sum), old), new);
}
@@ -155,16 +156,16 @@ void inet_proto_csum_replace16(__sum16 *
void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
__wsum diff, bool pseudohdr);
-static inline void inet_proto_csum_replace2(__sum16 *sum, struct sk_buff *skb,
- __be16 from, __be16 to,
- bool pseudohdr)
+static __always_inline
+void inet_proto_csum_replace2(__sum16 *sum, struct sk_buff *skb,
+ __be16 from, __be16 to, bool pseudohdr)
{
inet_proto_csum_replace4(sum, skb, (__force __be32)from,
(__force __be32)to, pseudohdr);
}
-static inline __wsum remcsum_adjust(void *ptr, __wsum csum,
- int start, int offset)
+static __always_inline __wsum remcsum_adjust(void *ptr, __wsum csum,
+ int start, int offset)
{
__sum16 *psum = (__sum16 *)(ptr + offset);
__wsum delta;
@@ -180,7 +181,7 @@ static inline __wsum remcsum_adjust(void
return delta;
}
-static inline void remcsum_unadjust(__sum16 *psum, __wsum delta)
+static __always_inline void remcsum_unadjust(__sum16 *psum, __wsum delta)
{
*psum = csum_fold(csum_sub(delta, (__force __wsum)*psum));
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 069/139] netfilter: nf_tables: unregister flowtable hooks on netns exit
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 068/139] net: Force inlining of checksum functions in net/checksum.h Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 070/139] nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() Greg Kroah-Hartman
` (79 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+e918523f77e62790d6d9,
Pablo Neira Ayuso
From: Pablo Neira Ayuso <pablo@netfilter.org>
commit 6069da443bf65f513bb507bb21e2f87cfb1ad0b6 upstream.
Unregister flowtable hooks before they are releases via
nf_tables_flowtable_destroy() otherwise hook core reports UAF.
BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142
Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666
CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
__dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106
dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106
print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247
__kasan_report mm/kasan/report.c:433 [inline]
__kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450
kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450
nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142
__nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429
nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571
nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232
nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430
nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline]
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline]
nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652
nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652
__nft_release_hook() calls nft_unregister_flowtable_net_hooks() which
only unregisters the hooks, then after RCU grace period, it is
guaranteed that no packets add new entries to the flowtable (no flow
offload rules and flowtable hooks are reachable from packet path), so it
is safe to call nf_flow_table_free() which cleans up the remaining
entries from the flowtable (both software and hardware) and it unbinds
the flow_block.
Fixes: ff4bf2f42a40 ("netfilter: nf_tables: add nft_unregister_flowtable_hook()")
Reported-by: syzbot+e918523f77e62790d6d9@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/nf_tables_api.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -9574,10 +9574,13 @@ EXPORT_SYMBOL_GPL(__nft_release_basechai
static void __nft_release_hook(struct net *net, struct nft_table *table)
{
+ struct nft_flowtable *flowtable;
struct nft_chain *chain;
list_for_each_entry(chain, &table->chains, list)
nf_tables_unregister_hook(net, table, chain);
+ list_for_each_entry(flowtable, &table->flowtables, list)
+ nft_unregister_flowtable_net_hooks(net, &flowtable->hook_list);
}
static void __nft_release_hooks(struct net *net)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 070/139] nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 069/139] netfilter: nf_tables: unregister flowtable hooks on netns exit Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 071/139] net: mdio-ipq4019: add delay after clock enable Greg Kroah-Hartman
` (78 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Simon Horman,
Jakub Kicinski
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
commit 3a14d0888eb4b0045884126acc69abfb7b87814d upstream.
ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX)
inclusive.
So NFP_MAX_MAC_INDEX (0xff) is a valid id.
In order for the error handling path to work correctly, the 'invalid'
value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range,
inclusive.
So set it to -1.
Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220218131535.100258-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c
@@ -922,8 +922,8 @@ nfp_tunnel_add_shared_mac(struct nfp_app
int port, bool mod)
{
struct nfp_flower_priv *priv = app->priv;
- int ida_idx = NFP_MAX_MAC_INDEX, err;
struct nfp_tun_offloaded_mac *entry;
+ int ida_idx = -1, err;
u16 nfp_mac_idx = 0;
entry = nfp_tunnel_lookup_offloaded_macs(app, netdev->dev_addr);
@@ -997,7 +997,7 @@ err_remove_hash:
err_free_entry:
kfree(entry);
err_free_ida:
- if (ida_idx != NFP_MAX_MAC_INDEX)
+ if (ida_idx != -1)
ida_simple_remove(&priv->tun.mac_off_ids, ida_idx);
return err;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 071/139] net: mdio-ipq4019: add delay after clock enable
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 070/139] nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 072/139] netfilter: nf_tables: fix memory leak during stateful obj update Greg Kroah-Hartman
` (77 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Baruch Siach, Andrew Lunn, David S. Miller
From: Baruch Siach <baruch.siach@siklu.com>
commit b6ad6261d27708567b309fdb3102b12c42a070cc upstream.
Experimentation shows that PHY detect might fail when the code attempts
MDIO bus read immediately after clock enable. Add delay to stabilize the
clock before bus access.
PHY detect failure started to show after commit 7590fc6f80ac ("net:
mdio: Demote probed message to debug print") that removed coincidental
delay between clock enable and bus access.
10ms is meant to match the time it take to send the probed message over
UART at 115200 bps. This might be a far overshoot.
Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver")
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/mdio/mdio-ipq4019.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/mdio/mdio-ipq4019.c
+++ b/drivers/net/mdio/mdio-ipq4019.c
@@ -200,7 +200,11 @@ static int ipq_mdio_reset(struct mii_bus
if (ret)
return ret;
- return clk_prepare_enable(priv->mdio_clk);
+ ret = clk_prepare_enable(priv->mdio_clk);
+ if (ret == 0)
+ mdelay(10);
+
+ return ret;
}
static int ipq4019_mdio_probe(struct platform_device *pdev)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 072/139] netfilter: nf_tables: fix memory leak during stateful obj update
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 071/139] net: mdio-ipq4019: add delay after clock enable Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 073/139] net/smc: Use a mutex for locking "struct smc_pnettable" Greg Kroah-Hartman
` (76 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fernando Fernandez Mancera,
Florian Westphal, Pablo Neira Ayuso
From: Florian Westphal <fw@strlen.de>
commit dad3bdeef45f81a6e90204bcc85360bb76eccec7 upstream.
stateful objects can be updated from the control plane.
The transaction logic allocates a temporary object for this purpose.
The ->init function was called for this object, so plain kfree() leaks
resources. We must call ->destroy function of the object.
nft_obj_destroy does this, but it also decrements the module refcount,
but the update path doesn't increment it.
To avoid special-casing the update object release, do module_get for
the update case too and release it via nft_obj_destroy().
Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation")
Cc: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/nf_tables_api.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6535,12 +6535,15 @@ static int nf_tables_updobj(const struct
{
struct nft_object *newobj;
struct nft_trans *trans;
- int err;
+ int err = -ENOMEM;
+
+ if (!try_module_get(type->owner))
+ return -ENOENT;
trans = nft_trans_alloc(ctx, NFT_MSG_NEWOBJ,
sizeof(struct nft_trans_obj));
if (!trans)
- return -ENOMEM;
+ goto err_trans;
newobj = nft_obj_init(ctx, type, attr);
if (IS_ERR(newobj)) {
@@ -6557,6 +6560,8 @@ static int nf_tables_updobj(const struct
err_free_trans:
kfree(trans);
+err_trans:
+ module_put(type->owner);
return err;
}
@@ -8169,7 +8174,7 @@ static void nft_obj_commit_update(struct
if (obj->ops->update)
obj->ops->update(obj, newobj);
- kfree(newobj);
+ nft_obj_destroy(&trans->ctx, newobj);
}
static void nft_commit_release(struct nft_trans *trans)
@@ -8914,7 +8919,7 @@ static int __nf_tables_abort(struct net
break;
case NFT_MSG_NEWOBJ:
if (nft_trans_obj_update(trans)) {
- kfree(nft_trans_obj_newobj(trans));
+ nft_obj_destroy(&trans->ctx, nft_trans_obj_newobj(trans));
nft_trans_destroy(trans);
} else {
trans->ctx.table->use--;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 073/139] net/smc: Use a mutex for locking "struct smc_pnettable"
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 072/139] netfilter: nf_tables: fix memory leak during stateful obj update Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 074/139] surface: surface3_power: Fix battery readings on batteries without a serial number Greg Kroah-Hartman
` (75 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fabio M. De Francesco, Karsten Graul,
Jakub Kicinski, syzbot+4f322a6d84e991c38775, Tony Lu
From: Fabio M. De Francesco <fmdefrancesco@gmail.com>
commit 7ff57e98fb78ad94edafbdc7435f2d745e9e6bb5 upstream.
smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib()
which, in turn, calls mutex_lock(&smc_ib_devices.mutex).
read_lock() disables preemption. Therefore, the code acquires a mutex while in
atomic context and it leads to a SAC bug.
Fix this bug by replacing the rwlock with a mutex.
Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com
Fixes: 64e28b52c7a6 ("net/smc: add pnet table namespace support")
Confirmed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/smc/smc_pnet.c | 42 +++++++++++++++++++++---------------------
net/smc/smc_pnet.h | 2 +-
2 files changed, 22 insertions(+), 22 deletions(-)
--- a/net/smc/smc_pnet.c
+++ b/net/smc/smc_pnet.c
@@ -112,7 +112,7 @@ static int smc_pnet_remove_by_pnetid(str
pnettable = &sn->pnettable;
/* remove table entry */
- write_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist,
list) {
if (!pnet_name ||
@@ -130,7 +130,7 @@ static int smc_pnet_remove_by_pnetid(str
rc = 0;
}
}
- write_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
/* if this is not the initial namespace, stop here */
if (net != &init_net)
@@ -191,7 +191,7 @@ static int smc_pnet_add_by_ndev(struct n
sn = net_generic(net, smc_net_id);
pnettable = &sn->pnettable;
- write_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist, list) {
if (pnetelem->type == SMC_PNET_ETH && !pnetelem->ndev &&
!strncmp(pnetelem->eth_name, ndev->name, IFNAMSIZ)) {
@@ -205,7 +205,7 @@ static int smc_pnet_add_by_ndev(struct n
break;
}
}
- write_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
return rc;
}
@@ -223,7 +223,7 @@ static int smc_pnet_remove_by_ndev(struc
sn = net_generic(net, smc_net_id);
pnettable = &sn->pnettable;
- write_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry_safe(pnetelem, tmp_pe, &pnettable->pnetlist, list) {
if (pnetelem->type == SMC_PNET_ETH && pnetelem->ndev == ndev) {
dev_put(pnetelem->ndev);
@@ -236,7 +236,7 @@ static int smc_pnet_remove_by_ndev(struc
break;
}
}
- write_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
return rc;
}
@@ -371,7 +371,7 @@ static int smc_pnet_add_eth(struct smc_p
rc = -EEXIST;
new_netdev = true;
- write_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
if (tmp_pe->type == SMC_PNET_ETH &&
!strncmp(tmp_pe->eth_name, eth_name, IFNAMSIZ)) {
@@ -381,9 +381,9 @@ static int smc_pnet_add_eth(struct smc_p
}
if (new_netdev) {
list_add_tail(&new_pe->list, &pnettable->pnetlist);
- write_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
} else {
- write_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
kfree(new_pe);
goto out_put;
}
@@ -444,7 +444,7 @@ static int smc_pnet_add_ib(struct smc_pn
new_pe->ib_port = ib_port;
new_ibdev = true;
- write_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
if (tmp_pe->type == SMC_PNET_IB &&
!strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX)) {
@@ -454,9 +454,9 @@ static int smc_pnet_add_ib(struct smc_pn
}
if (new_ibdev) {
list_add_tail(&new_pe->list, &pnettable->pnetlist);
- write_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
} else {
- write_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
kfree(new_pe);
}
return (new_ibdev) ? 0 : -EEXIST;
@@ -601,7 +601,7 @@ static int _smc_pnet_dump(struct net *ne
pnettable = &sn->pnettable;
/* dump pnettable entries */
- read_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry(pnetelem, &pnettable->pnetlist, list) {
if (pnetid && !smc_pnet_match(pnetelem->pnet_name, pnetid))
continue;
@@ -616,7 +616,7 @@ static int _smc_pnet_dump(struct net *ne
break;
}
}
- read_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
return idx;
}
@@ -860,7 +860,7 @@ int smc_pnet_net_init(struct net *net)
struct smc_pnetids_ndev *pnetids_ndev = &sn->pnetids_ndev;
INIT_LIST_HEAD(&pnettable->pnetlist);
- rwlock_init(&pnettable->lock);
+ mutex_init(&pnettable->lock);
INIT_LIST_HEAD(&pnetids_ndev->list);
rwlock_init(&pnetids_ndev->lock);
@@ -940,7 +940,7 @@ static int smc_pnet_find_ndev_pnetid_by_
sn = net_generic(net, smc_net_id);
pnettable = &sn->pnettable;
- read_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry(pnetelem, &pnettable->pnetlist, list) {
if (pnetelem->type == SMC_PNET_ETH && ndev == pnetelem->ndev) {
/* get pnetid of netdev device */
@@ -949,7 +949,7 @@ static int smc_pnet_find_ndev_pnetid_by_
break;
}
}
- read_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
return rc;
}
@@ -1130,7 +1130,7 @@ int smc_pnetid_by_table_ib(struct smc_ib
sn = net_generic(&init_net, smc_net_id);
pnettable = &sn->pnettable;
- read_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
if (tmp_pe->type == SMC_PNET_IB &&
!strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX) &&
@@ -1140,7 +1140,7 @@ int smc_pnetid_by_table_ib(struct smc_ib
break;
}
}
- read_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
return rc;
}
@@ -1159,7 +1159,7 @@ int smc_pnetid_by_table_smcd(struct smcd
sn = net_generic(&init_net, smc_net_id);
pnettable = &sn->pnettable;
- read_lock(&pnettable->lock);
+ mutex_lock(&pnettable->lock);
list_for_each_entry(tmp_pe, &pnettable->pnetlist, list) {
if (tmp_pe->type == SMC_PNET_IB &&
!strncmp(tmp_pe->ib_name, ib_name, IB_DEVICE_NAME_MAX)) {
@@ -1168,7 +1168,7 @@ int smc_pnetid_by_table_smcd(struct smcd
break;
}
}
- read_unlock(&pnettable->lock);
+ mutex_unlock(&pnettable->lock);
return rc;
}
--- a/net/smc/smc_pnet.h
+++ b/net/smc/smc_pnet.h
@@ -29,7 +29,7 @@ struct smc_link_group;
* @pnetlist: List of PNETIDs
*/
struct smc_pnettable {
- rwlock_t lock;
+ struct mutex lock;
struct list_head pnetlist;
};
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 074/139] surface: surface3_power: Fix battery readings on batteries without a serial number
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 073/139] net/smc: Use a mutex for locking "struct smc_pnettable" Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 075/139] udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister() Greg Kroah-Hartman
` (74 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Benjamin Tissoires, Maximilian Luz,
Hans de Goede
From: Hans de Goede <hdegoede@redhat.com>
commit 21d90aaee8d5c2a097ef41f1430d97661233ecc6 upstream.
The battery on the 2nd hand Surface 3 which I recently bought appears to
not have a serial number programmed in. This results in any I2C reads from
the registers containing the serial number failing with an I2C NACK.
This was causing mshw0011_bix() to fail causing the battery readings to
not work at all.
Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and
continue with an empty serial number to fix this.
Fixes: b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
BugLink: https://github.com/linux-surface/linux-surface/issues/608
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/platform/surface/surface3_power.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/platform/surface/surface3_power.c
+++ b/drivers/platform/surface/surface3_power.c
@@ -233,14 +233,21 @@ static int mshw0011_bix(struct mshw0011_
}
bix->last_full_charg_capacity = ret;
- /* get serial number */
+ /*
+ * Get serial number, on some devices (with unofficial replacement
+ * battery?) reading any of the serial number range addresses gets
+ * nacked in this case just leave the serial number empty.
+ */
ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_SERIAL_NO,
sizeof(buf), buf);
- if (ret != sizeof(buf)) {
+ if (ret == -EREMOTEIO) {
+ /* no serial number available */
+ } else if (ret != sizeof(buf)) {
dev_err(&client->dev, "Error reading serial no: %d\n", ret);
return ret;
+ } else {
+ snprintf(bix->serial, ARRAY_SIZE(bix->serial), "%3pE%6pE", buf + 7, buf);
}
- snprintf(bix->serial, ARRAY_SIZE(bix->serial), "%3pE%6pE", buf + 7, buf);
/* get cycle count */
ret = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CYCLE_CNT);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 075/139] udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 074/139] surface: surface3_power: Fix battery readings on batteries without a serial number Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 076/139] net/mlx5: DR, Cache STE shadow memory Greg Kroah-Hartman
` (73 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, David S. Miller
From: Dan Carpenter <dan.carpenter@oracle.com>
commit de7b2efacf4e83954aed3f029d347dfc0b7a4f49 upstream.
This test is checking if we exited the list via break or not. However
if it did not exit via a break then "node" does not point to a valid
udp_tunnel_nic_shared_node struct. It will work because of the way
the structs are laid out it's the equivalent of
"if (info->shared->udp_tunnel_nic_info != dev)" which will always be
true, but it's not the right way to test.
Fixes: 74cc6d182d03 ("udp_tunnel: add the ability to share port tables")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/udp_tunnel_nic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/udp_tunnel_nic.c
+++ b/net/ipv4/udp_tunnel_nic.c
@@ -846,7 +846,7 @@ udp_tunnel_nic_unregister(struct net_dev
list_for_each_entry(node, &info->shared->devices, list)
if (node->dev == dev)
break;
- if (node->dev != dev)
+ if (list_entry_is_head(node, &info->shared->devices, list))
return;
list_del(&node->list);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 076/139] net/mlx5: DR, Cache STE shadow memory
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 075/139] udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 077/139] ibmvnic: schedule failover only if vioctl fails Greg Kroah-Hartman
` (72 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alex Vesker, Yevgeny Kliteynik,
Saeed Mahameed
From: Yevgeny Kliteynik <kliteyn@nvidia.com>
commit e5b2bc30c21139ae10f0e56989389d0bc7b7b1d6 upstream.
During rule insertion on each ICM memory chunk we also allocate shadow memory
used for management. This includes the hw_ste, dr_ste and miss list per entry.
Since the scale of these allocations is large we noticed a performance hiccup
that happens once malloc and free are stressed.
In extreme usecases when ~1M chunks are freed at once, it might take up to 40
seconds to complete this, up to the point the kernel sees this as self-detected
stall on CPU:
rcu: INFO: rcu_sched self-detected stall on CPU
To resolve this we will increase the reuse of shadow memory.
Doing this we see that a time in the aforementioned usecase dropped from ~40
seconds to ~8-10 seconds.
Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator")
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c | 109 ++++++----
drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h | 5
2 files changed, 79 insertions(+), 35 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c
@@ -136,37 +136,35 @@ static void dr_icm_pool_mr_destroy(struc
kvfree(icm_mr);
}
-static int dr_icm_chunk_ste_init(struct mlx5dr_icm_chunk *chunk)
+static int dr_icm_buddy_get_ste_size(struct mlx5dr_icm_buddy_mem *buddy)
{
- chunk->ste_arr = kvzalloc(chunk->num_of_entries *
- sizeof(chunk->ste_arr[0]), GFP_KERNEL);
- if (!chunk->ste_arr)
- return -ENOMEM;
-
- chunk->hw_ste_arr = kvzalloc(chunk->num_of_entries *
- DR_STE_SIZE_REDUCED, GFP_KERNEL);
- if (!chunk->hw_ste_arr)
- goto out_free_ste_arr;
-
- chunk->miss_list = kvmalloc(chunk->num_of_entries *
- sizeof(chunk->miss_list[0]), GFP_KERNEL);
- if (!chunk->miss_list)
- goto out_free_hw_ste_arr;
+ /* We support only one type of STE size, both for ConnectX-5 and later
+ * devices. Once the support for match STE which has a larger tag is
+ * added (32B instead of 16B), the STE size for devices later than
+ * ConnectX-5 needs to account for that.
+ */
+ return DR_STE_SIZE_REDUCED;
+}
- return 0;
+static void dr_icm_chunk_ste_init(struct mlx5dr_icm_chunk *chunk, int offset)
+{
+ struct mlx5dr_icm_buddy_mem *buddy = chunk->buddy_mem;
+ int index = offset / DR_STE_SIZE;
-out_free_hw_ste_arr:
- kvfree(chunk->hw_ste_arr);
-out_free_ste_arr:
- kvfree(chunk->ste_arr);
- return -ENOMEM;
+ chunk->ste_arr = &buddy->ste_arr[index];
+ chunk->miss_list = &buddy->miss_list[index];
+ chunk->hw_ste_arr = buddy->hw_ste_arr +
+ index * dr_icm_buddy_get_ste_size(buddy);
}
static void dr_icm_chunk_ste_cleanup(struct mlx5dr_icm_chunk *chunk)
{
- kvfree(chunk->miss_list);
- kvfree(chunk->hw_ste_arr);
- kvfree(chunk->ste_arr);
+ struct mlx5dr_icm_buddy_mem *buddy = chunk->buddy_mem;
+
+ memset(chunk->hw_ste_arr, 0,
+ chunk->num_of_entries * dr_icm_buddy_get_ste_size(buddy));
+ memset(chunk->ste_arr, 0,
+ chunk->num_of_entries * sizeof(chunk->ste_arr[0]));
}
static enum mlx5dr_icm_type
@@ -189,6 +187,44 @@ static void dr_icm_chunk_destroy(struct
kvfree(chunk);
}
+static int dr_icm_buddy_init_ste_cache(struct mlx5dr_icm_buddy_mem *buddy)
+{
+ int num_of_entries =
+ mlx5dr_icm_pool_chunk_size_to_entries(buddy->pool->max_log_chunk_sz);
+
+ buddy->ste_arr = kvcalloc(num_of_entries,
+ sizeof(struct mlx5dr_ste), GFP_KERNEL);
+ if (!buddy->ste_arr)
+ return -ENOMEM;
+
+ /* Preallocate full STE size on non-ConnectX-5 devices since
+ * we need to support both full and reduced with the same cache.
+ */
+ buddy->hw_ste_arr = kvcalloc(num_of_entries,
+ dr_icm_buddy_get_ste_size(buddy), GFP_KERNEL);
+ if (!buddy->hw_ste_arr)
+ goto free_ste_arr;
+
+ buddy->miss_list = kvmalloc(num_of_entries * sizeof(struct list_head), GFP_KERNEL);
+ if (!buddy->miss_list)
+ goto free_hw_ste_arr;
+
+ return 0;
+
+free_hw_ste_arr:
+ kvfree(buddy->hw_ste_arr);
+free_ste_arr:
+ kvfree(buddy->ste_arr);
+ return -ENOMEM;
+}
+
+static void dr_icm_buddy_cleanup_ste_cache(struct mlx5dr_icm_buddy_mem *buddy)
+{
+ kvfree(buddy->ste_arr);
+ kvfree(buddy->hw_ste_arr);
+ kvfree(buddy->miss_list);
+}
+
static int dr_icm_buddy_create(struct mlx5dr_icm_pool *pool)
{
struct mlx5dr_icm_buddy_mem *buddy;
@@ -208,11 +244,19 @@ static int dr_icm_buddy_create(struct ml
buddy->icm_mr = icm_mr;
buddy->pool = pool;
+ if (pool->icm_type == DR_ICM_TYPE_STE) {
+ /* Reduce allocations by preallocating and reusing the STE structures */
+ if (dr_icm_buddy_init_ste_cache(buddy))
+ goto err_cleanup_buddy;
+ }
+
/* add it to the -start- of the list in order to search in it first */
list_add(&buddy->list_node, &pool->buddy_mem_list);
return 0;
+err_cleanup_buddy:
+ mlx5dr_buddy_cleanup(buddy);
err_free_buddy:
kvfree(buddy);
free_mr:
@@ -234,6 +278,9 @@ static void dr_icm_buddy_destroy(struct
mlx5dr_buddy_cleanup(buddy);
+ if (buddy->pool->icm_type == DR_ICM_TYPE_STE)
+ dr_icm_buddy_cleanup_ste_cache(buddy);
+
kvfree(buddy);
}
@@ -261,26 +308,18 @@ dr_icm_chunk_create(struct mlx5dr_icm_po
chunk->byte_size =
mlx5dr_icm_pool_chunk_size_to_byte(chunk_size, pool->icm_type);
chunk->seg = seg;
+ chunk->buddy_mem = buddy_mem_pool;
- if (pool->icm_type == DR_ICM_TYPE_STE && dr_icm_chunk_ste_init(chunk)) {
- mlx5dr_err(pool->dmn,
- "Failed to init ste arrays (order: %d)\n",
- chunk_size);
- goto out_free_chunk;
- }
+ if (pool->icm_type == DR_ICM_TYPE_STE)
+ dr_icm_chunk_ste_init(chunk, offset);
buddy_mem_pool->used_memory += chunk->byte_size;
- chunk->buddy_mem = buddy_mem_pool;
INIT_LIST_HEAD(&chunk->chunk_list);
/* chunk now is part of the used_list */
list_add_tail(&chunk->chunk_list, &buddy_mem_pool->used_list);
return chunk;
-
-out_free_chunk:
- kvfree(chunk);
- return NULL;
}
static bool dr_icm_pool_is_sync_required(struct mlx5dr_icm_pool *pool)
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
@@ -160,6 +160,11 @@ struct mlx5dr_icm_buddy_mem {
* sync_ste command sets them free.
*/
struct list_head hot_list;
+
+ /* Memory optimisation */
+ struct mlx5dr_ste *ste_arr;
+ struct list_head *miss_list;
+ u8 *hw_ste_arr;
};
int mlx5dr_buddy_init(struct mlx5dr_icm_buddy_mem *buddy,
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 077/139] ibmvnic: schedule failover only if vioctl fails
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 076/139] net/mlx5: DR, Cache STE shadow memory Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 078/139] net/mlx5: DR, Dont allow match on IP w/o matching on full ethertype/ip_version Greg Kroah-Hartman
` (71 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Cris Forno, Sukadev Bhattiprolu,
Dany Madden, Jakub Kicinski
From: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
commit 277f2bb14361790a70e4b3c649e794b75a91a597 upstream.
If client is unable to initiate a failover reset via H_VIOCTL hcall, then
it should schedule a failover reset as a last resort. Otherwise, there is
no need to do a last resort.
Fixes: 334c42414729 ("ibmvnic: improve failover sysfs entry")
Reported-by: Cris Forno <cforno12@outlook.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220221210545.115283-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/ibm/ibmvnic.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -5733,10 +5733,14 @@ static ssize_t failover_store(struct dev
be64_to_cpu(session_token));
rc = plpar_hcall_norets(H_VIOCTL, adapter->vdev->unit_address,
H_SESSION_ERR_DETECTED, session_token, 0, 0);
- if (rc)
+ if (rc) {
netdev_err(netdev,
"H_VIOCTL initiated failover failed, rc %ld\n",
rc);
+ goto last_resort;
+ }
+
+ return count;
last_resort:
netdev_dbg(netdev, "Trying to send CRQ_CMD, the last resort\n");
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 078/139] net/mlx5: DR, Dont allow match on IP w/o matching on full ethertype/ip_version
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 077/139] ibmvnic: schedule failover only if vioctl fails Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 079/139] net/mlx5: Fix possible deadlock on rule deletion Greg Kroah-Hartman
` (70 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yevgeny Kliteynik, Alex Vesker,
Saeed Mahameed
From: Yevgeny Kliteynik <kliteyn@nvidia.com>
commit ffb0753b954763d94f52c901adfe58ed0d4005e6 upstream.
Currently SMFS allows adding rule with matching on src/dst IP w/o matching
on full ethertype or ip_version, which is not supported by HW.
This patch fixes this issue and adds the check as it is done in DMFS.
Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c | 20 +-----
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c | 32 +++++++++-
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h | 10 +++
3 files changed, 45 insertions(+), 17 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c
@@ -13,18 +13,6 @@ static bool dr_mask_is_dmac_set(struct m
return (spec->dmac_47_16 || spec->dmac_15_0);
}
-static bool dr_mask_is_src_addr_set(struct mlx5dr_match_spec *spec)
-{
- return (spec->src_ip_127_96 || spec->src_ip_95_64 ||
- spec->src_ip_63_32 || spec->src_ip_31_0);
-}
-
-static bool dr_mask_is_dst_addr_set(struct mlx5dr_match_spec *spec)
-{
- return (spec->dst_ip_127_96 || spec->dst_ip_95_64 ||
- spec->dst_ip_63_32 || spec->dst_ip_31_0);
-}
-
static bool dr_mask_is_l3_base_set(struct mlx5dr_match_spec *spec)
{
return (spec->ip_protocol || spec->frag || spec->tcp_flags ||
@@ -480,11 +468,11 @@ static int dr_matcher_set_ste_builders(s
&mask, inner, rx);
if (outer_ipv == DR_RULE_IPV6) {
- if (dr_mask_is_dst_addr_set(&mask.outer))
+ if (DR_MASK_IS_DST_IP_SET(&mask.outer))
mlx5dr_ste_build_eth_l3_ipv6_dst(ste_ctx, &sb[idx++],
&mask, inner, rx);
- if (dr_mask_is_src_addr_set(&mask.outer))
+ if (DR_MASK_IS_SRC_IP_SET(&mask.outer))
mlx5dr_ste_build_eth_l3_ipv6_src(ste_ctx, &sb[idx++],
&mask, inner, rx);
@@ -580,11 +568,11 @@ static int dr_matcher_set_ste_builders(s
&mask, inner, rx);
if (inner_ipv == DR_RULE_IPV6) {
- if (dr_mask_is_dst_addr_set(&mask.inner))
+ if (DR_MASK_IS_DST_IP_SET(&mask.inner))
mlx5dr_ste_build_eth_l3_ipv6_dst(ste_ctx, &sb[idx++],
&mask, inner, rx);
- if (dr_mask_is_src_addr_set(&mask.inner))
+ if (DR_MASK_IS_SRC_IP_SET(&mask.inner))
mlx5dr_ste_build_eth_l3_ipv6_src(ste_ctx, &sb[idx++],
&mask, inner, rx);
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c
@@ -602,12 +602,34 @@ int mlx5dr_ste_set_action_decap_l3_list(
used_hw_action_num);
}
+static int dr_ste_build_pre_check_spec(struct mlx5dr_domain *dmn,
+ struct mlx5dr_match_spec *spec)
+{
+ if (spec->ip_version) {
+ if (spec->ip_version != 0xf) {
+ mlx5dr_err(dmn,
+ "Partial ip_version mask with src/dst IP is not supported\n");
+ return -EINVAL;
+ }
+ } else if (spec->ethertype != 0xffff &&
+ (DR_MASK_IS_SRC_IP_SET(spec) || DR_MASK_IS_DST_IP_SET(spec))) {
+ mlx5dr_err(dmn,
+ "Partial/no ethertype mask with src/dst IP is not supported\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int mlx5dr_ste_build_pre_check(struct mlx5dr_domain *dmn,
u8 match_criteria,
struct mlx5dr_match_param *mask,
struct mlx5dr_match_param *value)
{
- if (!value && (match_criteria & DR_MATCHER_CRITERIA_MISC)) {
+ if (value)
+ return 0;
+
+ if (match_criteria & DR_MATCHER_CRITERIA_MISC) {
if (mask->misc.source_port && mask->misc.source_port != 0xffff) {
mlx5dr_err(dmn,
"Partial mask source_port is not supported\n");
@@ -621,6 +643,14 @@ int mlx5dr_ste_build_pre_check(struct ml
}
}
+ if ((match_criteria & DR_MATCHER_CRITERIA_OUTER) &&
+ dr_ste_build_pre_check_spec(dmn, &mask->outer))
+ return -EINVAL;
+
+ if ((match_criteria & DR_MATCHER_CRITERIA_INNER) &&
+ dr_ste_build_pre_check_spec(dmn, &mask->inner))
+ return -EINVAL;
+
return 0;
}
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
@@ -740,6 +740,16 @@ struct mlx5dr_match_param {
(_misc3)->icmpv4_code || \
(_misc3)->icmpv4_header_data)
+#define DR_MASK_IS_SRC_IP_SET(_spec) ((_spec)->src_ip_127_96 || \
+ (_spec)->src_ip_95_64 || \
+ (_spec)->src_ip_63_32 || \
+ (_spec)->src_ip_31_0)
+
+#define DR_MASK_IS_DST_IP_SET(_spec) ((_spec)->dst_ip_127_96 || \
+ (_spec)->dst_ip_95_64 || \
+ (_spec)->dst_ip_63_32 || \
+ (_spec)->dst_ip_31_0)
+
struct mlx5dr_esw_caps {
u64 drop_icm_address_rx;
u64 drop_icm_address_tx;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 079/139] net/mlx5: Fix possible deadlock on rule deletion
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 078/139] net/mlx5: DR, Dont allow match on IP w/o matching on full ethertype/ip_version Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 080/139] net/mlx5: Fix wrong limitation of metadata match on ecpf Greg Kroah-Hartman
` (69 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maor Gottlieb, Mark Bloch, Saeed Mahameed
From: Maor Gottlieb <maorg@nvidia.com>
commit b645e57debca846f51b3209907546ea857ddd3f5 upstream.
Add missing call to up_write_ref_node() which releases the semaphore
in case the FTE doesn't have destinations, such in drop rule case.
Fixes: 465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -2041,6 +2041,8 @@ void mlx5_del_flow_rules(struct mlx5_flo
fte->node.del_hw_func = NULL;
up_write_ref_node(&fte->node, false);
tree_put_node(&fte->node, false);
+ } else {
+ up_write_ref_node(&fte->node, false);
}
kfree(handle);
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 080/139] net/mlx5: Fix wrong limitation of metadata match on ecpf
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 079/139] net/mlx5: Fix possible deadlock on rule deletion Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 081/139] net/mlx5: DR, Fix the threshold that defines when pool sync is initiated Greg Kroah-Hartman
` (68 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ariel Levkovich, Maor Dickman,
Saeed Mahameed
From: Ariel Levkovich <lariel@nvidia.com>
commit 07666c75ad17d7389b18ac0235c8cf41e1504ea8 upstream.
Match metadata support check returns false for ecpf device.
However, this support does exist for ecpf and therefore this
limitation should be removed to allow feature such as stacked
devices and internal port offloaded to be supported.
Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -2784,10 +2784,6 @@ bool mlx5_esw_vport_match_metadata_suppo
if (!MLX5_CAP_ESW_FLOWTABLE(esw->dev, flow_source))
return false;
- if (mlx5_core_is_ecpf_esw_manager(esw->dev) ||
- mlx5_ecpf_vport_exists(esw->dev))
- return false;
-
return true;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 081/139] net/mlx5: DR, Fix the threshold that defines when pool sync is initiated
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 080/139] net/mlx5: Fix wrong limitation of metadata match on ecpf Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 082/139] net/mlx5e: MPLSoUDP decap, fix check for unsupported matches Greg Kroah-Hartman
` (67 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yevgeny Kliteynik, Alex Vesker,
Saeed Mahameed
From: Yevgeny Kliteynik <kliteyn@nvidia.com>
commit ecd9c5cd46e013659e2fad433057bad1ba66888e upstream.
When deciding whether to start syncing and actually free all the "hot"
ICM chunks, we need to consider the type of the ICM chunks that we're
dealing with. For instance, the amount of available ICM for MODIFY_ACTION
is significantly lower than the usual STE ICM, so the threshold should
account for that - otherwise we can deplete MODIFY_ACTION memory just by
creating and deleting the same modify header action in a continuous loop.
This patch replaces the hard-coded threshold with a dynamic value.
Fixes: 1c58651412bb ("net/mlx5: DR, ICM memory pools sync optimization")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c | 11 ++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c
@@ -4,7 +4,6 @@
#include "dr_types.h"
#define DR_ICM_MODIFY_HDR_ALIGN_BASE 64
-#define DR_ICM_SYNC_THRESHOLD_POOL (64 * 1024 * 1024)
struct mlx5dr_icm_pool {
enum mlx5dr_icm_type icm_type;
@@ -324,10 +323,14 @@ dr_icm_chunk_create(struct mlx5dr_icm_po
static bool dr_icm_pool_is_sync_required(struct mlx5dr_icm_pool *pool)
{
- if (pool->hot_memory_size > DR_ICM_SYNC_THRESHOLD_POOL)
- return true;
+ int allow_hot_size;
- return false;
+ /* sync when hot memory reaches half of the pool size */
+ allow_hot_size =
+ mlx5dr_icm_pool_chunk_size_to_byte(pool->max_log_chunk_sz,
+ pool->icm_type) / 2;
+
+ return pool->hot_memory_size > allow_hot_size;
}
static int dr_icm_pool_sync_all_buddy_pools(struct mlx5dr_icm_pool *pool)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 082/139] net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 081/139] net/mlx5: DR, Fix the threshold that defines when pool sync is initiated Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 083/139] net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets Greg Kroah-Hartman
` (66 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maor Dickman, Roi Dayan, Saeed Mahameed
From: Maor Dickman <maord@nvidia.com>
commit fdc18e4e4bded2a08638cdcd22dc087a64b9ddad upstream.
Currently offload of rule on bareudp device require tunnel key
in order to match on mpls fields and without it the mpls fields
are ignored, this is incorrect due to the fact udp tunnel doesn't
have key to match on.
Fix by returning error in case flow is matching on tunnel key.
Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c | 28 ++++-------
1 file changed, 11 insertions(+), 17 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c
@@ -60,37 +60,31 @@ static int parse_tunnel(struct mlx5e_pri
void *headers_v)
{
struct flow_rule *rule = flow_cls_offload_flow_rule(f);
- struct flow_match_enc_keyid enc_keyid;
struct flow_match_mpls match;
void *misc2_c;
void *misc2_v;
- misc2_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
- misc_parameters_2);
- misc2_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
- misc_parameters_2);
-
- if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS))
- return 0;
-
- if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID))
- return 0;
-
- flow_rule_match_enc_keyid(rule, &enc_keyid);
-
- if (!enc_keyid.mask->keyid)
- return 0;
-
if (!MLX5_CAP_ETH(priv->mdev, tunnel_stateless_mpls_over_udp) &&
!(MLX5_CAP_GEN(priv->mdev, flex_parser_protocols) & MLX5_FLEX_PROTO_CW_MPLS_UDP))
return -EOPNOTSUPP;
+ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID))
+ return -EOPNOTSUPP;
+
+ if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS))
+ return 0;
+
flow_rule_match_mpls(rule, &match);
/* Only support matching the first LSE */
if (match.mask->used_lses != 1)
return -EOPNOTSUPP;
+ misc2_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+ misc_parameters_2);
+ misc2_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+ misc_parameters_2);
+
MLX5_SET(fte_match_set_misc2, misc2_c,
outer_first_mpls_over_udp.mpls_label,
match.mask->ls[0].mpls_label);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 083/139] net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 082/139] net/mlx5e: MPLSoUDP decap, fix check for unsupported matches Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 084/139] net/mlx5: Update log_max_qp value to be 17 at most Greg Kroah-Hartman
` (65 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tariq Toukan, Saeed Mahameed
From: Tariq Toukan <tariqt@nvidia.com>
commit 7eaf1f37b8817c608c4e959d69986ef459d345cd upstream.
For RX TLS device-offloaded packets, the HW spec guarantees checksum
validation for the offloaded packets, but does not define whether the
CQE.checksum field matches the original packet (ciphertext) or
the decrypted one (plaintext). This latitude allows architetctural
improvements between generations of chips, resulting in different decisions
regarding the value type of CQE.checksum.
Hence, for these packets, the device driver should not make use of this CQE
field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded
packets, and use CHECKSUM_UNNECESSARY instead.
Value of the packet's tcp_hdr.csum is not modified by the HW, and it always
matches the original ciphertext.
Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -987,7 +987,8 @@ static inline void mlx5e_handle_csum(str
}
/* True when explicitly set via priv flag, or XDP prog is loaded */
- if (test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state))
+ if (test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state) ||
+ get_cqe_tls_offload(cqe))
goto csum_unnecessary;
/* CQE csum doesn't cover padding octets in short ethernet
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 084/139] net/mlx5: Update log_max_qp value to be 17 at most
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 083/139] net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 085/139] spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() Greg Kroah-Hartman
` (64 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maher Sanalla, Avihai Horon, Saeed Mahameed
From: Maher Sanalla <msanalla@nvidia.com>
commit 7f839965b2d77e1926ad08b23c51d60988f10a99 upstream.
Currently, log_max_qp value is dependent on what FW reports as its max capability.
In reality, due to a bug, some FWs report a value greater than 17, even though they
don't support log_max_qp > 17.
This FW issue led the driver to exhaust memory on startup.
Thus, log_max_qp value is set to be no more than 17 regardless
of what FW reports, as it was before the cited commit.
Fixes: f79a609ea6bf ("net/mlx5: Update log_max_qp value to FW max capability")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -516,7 +516,7 @@ static int handle_hca_cap(struct mlx5_co
/* Check log_max_qp from HCA caps to set in current profile */
if (prof->log_max_qp == LOG_MAX_SUPPORTED_QPS) {
- prof->log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp);
+ prof->log_max_qp = min_t(u8, 17, MLX5_CAP_GEN_MAX(dev, log_max_qp));
} else if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < prof->log_max_qp) {
mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n",
prof->log_max_qp,
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 085/139] spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 084/139] net/mlx5: Update log_max_qp value to be 17 at most Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 086/139] gpio: rockchip: Reset int_bothedge when changing trigger Greg Kroah-Hartman
` (63 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhou Qingyang, Mark Brown, Sasha Levin
From: Zhou Qingyang <zhou1615@umn.edu>
[ Upstream commit ab3824427b848da10e9fe2727f035bbeecae6ff4 ]
In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(),
which could lead to a NULL pointer dereference on failure of
kzalloc().
Fix this bug by adding a check of tmpbuf.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172253.203700-1-zhou1615@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-zynq-qspi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index cfa222c9bd5e7..78f31b61a2aac 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -570,6 +570,9 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
if (op->dummy.nbytes) {
tmpbuf = kzalloc(op->dummy.nbytes, GFP_KERNEL);
+ if (!tmpbuf)
+ return -ENOMEM;
+
memset(tmpbuf, 0xff, op->dummy.nbytes);
reinit_completion(&xqspi->data_completion);
xqspi->txbuf = tmpbuf;
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 086/139] gpio: rockchip: Reset int_bothedge when changing trigger
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 085/139] spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 087/139] regmap-irq: Update interrupt clear register for proper reset Greg Kroah-Hartman
` (62 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guillaume Savaton, Samuel Holland,
Bartosz Golaszewski, Sasha Levin
From: Samuel Holland <samuel@sholland.org>
[ Upstream commit 7920af5c826cb4a7ada1ae26fdd317642805adc2 ]
With v2 hardware, an IRQ can be configured to trigger on both edges via
a bit in the int_bothedge register. Currently, the driver sets this bit
when changing the trigger type to IRQ_TYPE_EDGE_BOTH, but fails to reset
this bit if the trigger type is later changed to something else. This
causes spurious IRQs, and when using gpio-keys with wakeup-event-action
set to EV_ACT_(DE)ASSERTED, those IRQs translate into spurious wakeups.
Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller")
Reported-by: Guillaume Savaton <guillaume@baierouge.fr>
Tested-by: Guillaume Savaton <guillaume@baierouge.fr>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-rockchip.c | 56 +++++++++++++++++++-----------------
1 file changed, 29 insertions(+), 27 deletions(-)
diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index ce63cbd14d69a..24155c038f6d0 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -410,10 +410,8 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
level = rockchip_gpio_readl(bank, bank->gpio_regs->int_type);
polarity = rockchip_gpio_readl(bank, bank->gpio_regs->int_polarity);
- switch (type) {
- case IRQ_TYPE_EDGE_BOTH:
+ if (type == IRQ_TYPE_EDGE_BOTH) {
if (bank->gpio_type == GPIO_TYPE_V2) {
- bank->toggle_edge_mode &= ~mask;
rockchip_gpio_writel_bit(bank, d->hwirq, 1,
bank->gpio_regs->int_bothedge);
goto out;
@@ -431,30 +429,34 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
else
polarity |= mask;
}
- break;
- case IRQ_TYPE_EDGE_RISING:
- bank->toggle_edge_mode &= ~mask;
- level |= mask;
- polarity |= mask;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- bank->toggle_edge_mode &= ~mask;
- level |= mask;
- polarity &= ~mask;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- bank->toggle_edge_mode &= ~mask;
- level &= ~mask;
- polarity |= mask;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- bank->toggle_edge_mode &= ~mask;
- level &= ~mask;
- polarity &= ~mask;
- break;
- default:
- ret = -EINVAL;
- goto out;
+ } else {
+ if (bank->gpio_type == GPIO_TYPE_V2) {
+ rockchip_gpio_writel_bit(bank, d->hwirq, 0,
+ bank->gpio_regs->int_bothedge);
+ } else {
+ bank->toggle_edge_mode &= ~mask;
+ }
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ level |= mask;
+ polarity |= mask;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ level |= mask;
+ polarity &= ~mask;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ level &= ~mask;
+ polarity |= mask;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ level &= ~mask;
+ polarity &= ~mask;
+ break;
+ default:
+ ret = -EINVAL;
+ goto out;
+ }
}
rockchip_gpio_writel(bank, level, bank->gpio_regs->int_type);
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 087/139] regmap-irq: Update interrupt clear register for proper reset
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 086/139] gpio: rockchip: Reset int_bothedge when changing trigger Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 088/139] net-timestamp: convert sk->sk_tskey to atomic_t Greg Kroah-Hartman
` (61 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Prasad Kumpatla, Charles Keepax,
Marek Szyprowski, Mark Brown, Sasha Levin
From: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
[ Upstream commit d04ad245d67a3991dfea5e108e4c452c2ab39bac ]
With the existing logic where clear_ack is true (HW doesn’t support
auto clear for ICR), interrupt clear register reset is not handled
properly. Due to this only the first interrupts get processed properly
and further interrupts are blocked due to not resetting interrupt
clear register.
Example for issue case where Invert_ack is false and clear_ack is true:
Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2
interrupts making ISR = 0x11.
Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to
be cleared with the help of ICR once the Interrupt is processed.
Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00.
Step 3: Issue - In the existing code, ICR is written with ICR =
~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts
from raising except for interrupts 0 and 4. So expectation here is to
reset ICR, which will unblock all the interrupts.
if (chip->clear_ack) {
if (chip->ack_invert && !ret)
........
else if (!ret)
ret = regmap_write(map, reg,
~data->status_buf[i]);
So writing 0 and 0xff (when ack_invert is true) should have no effect, other
than clearing the ACKs just set.
Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers")
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220217085007.30218-1-quic_pkumpatl@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/base/regmap/regmap-irq.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index d2656581a6085..4a446259a184e 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -189,11 +189,9 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
ret = regmap_write(map, reg, d->mask_buf[i]);
if (d->chip->clear_ack) {
if (d->chip->ack_invert && !ret)
- ret = regmap_write(map, reg,
- d->mask_buf[i]);
+ ret = regmap_write(map, reg, UINT_MAX);
else if (!ret)
- ret = regmap_write(map, reg,
- ~d->mask_buf[i]);
+ ret = regmap_write(map, reg, 0);
}
if (ret != 0)
dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
@@ -556,11 +554,9 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
data->status_buf[i]);
if (chip->clear_ack) {
if (chip->ack_invert && !ret)
- ret = regmap_write(map, reg,
- data->status_buf[i]);
+ ret = regmap_write(map, reg, UINT_MAX);
else if (!ret)
- ret = regmap_write(map, reg,
- ~data->status_buf[i]);
+ ret = regmap_write(map, reg, 0);
}
if (ret != 0)
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
@@ -817,13 +813,9 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
d->status_buf[i] & d->mask_buf[i]);
if (chip->clear_ack) {
if (chip->ack_invert && !ret)
- ret = regmap_write(map, reg,
- (d->status_buf[i] &
- d->mask_buf[i]));
+ ret = regmap_write(map, reg, UINT_MAX);
else if (!ret)
- ret = regmap_write(map, reg,
- ~(d->status_buf[i] &
- d->mask_buf[i]));
+ ret = regmap_write(map, reg, 0);
}
if (ret != 0) {
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 088/139] net-timestamp: convert sk->sk_tskey to atomic_t
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 087/139] regmap-irq: Update interrupt clear register for proper reset Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 089/139] RDMA/rtrs-clt: Fix possible double free in error case Greg Kroah-Hartman
` (60 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Willem de Bruijn,
syzbot, David S. Miller, Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit a1cdec57e03a1352e92fbbe7974039dda4efcec0 ]
UDP sendmsg() can be lockless, this is causing all kinds
of data races.
This patch converts sk->sk_tskey to remove one of these races.
BUG: KCSAN: data-race in __ip_append_data / __ip_append_data
read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1:
__ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0:
__ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000054d -> 0x0000054e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85fa6f-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/sock.h | 4 ++--
net/can/j1939/transport.c | 2 +-
net/core/skbuff.c | 2 +-
net/core/sock.c | 4 ++--
net/ipv4/ip_output.c | 2 +-
net/ipv6/ip6_output.c | 2 +-
6 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index dfb92f91d5be5..7d49196a3880e 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -506,7 +506,7 @@ struct sock {
u16 sk_tsflags;
int sk_bind_phc;
u8 sk_shutdown;
- u32 sk_tskey;
+ atomic_t sk_tskey;
atomic_t sk_zckey;
u8 sk_clockid;
@@ -2598,7 +2598,7 @@ static inline void _sock_tx_timestamp(struct sock *sk, __u16 tsflags,
__sock_tx_timestamp(tsflags, tx_flags);
if (tsflags & SOF_TIMESTAMPING_OPT_ID && tskey &&
tsflags & SOF_TIMESTAMPING_TX_RECORD_MASK)
- *tskey = sk->sk_tskey++;
+ *tskey = atomic_inc_return(&sk->sk_tskey) - 1;
}
if (unlikely(sock_flag(sk, SOCK_WIFI_STATUS)))
*tx_flags |= SKBTX_WIFI_STATUS;
diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index a271688780a2c..307ee1174a6e2 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -2006,7 +2006,7 @@ struct j1939_session *j1939_tp_send(struct j1939_priv *priv,
/* set the end-packet for broadcast */
session->pkt.last = session->pkt.total;
- skcb->tskey = session->sk->sk_tskey++;
+ skcb->tskey = atomic_inc_return(&session->sk->sk_tskey) - 1;
session->tskey = skcb->tskey;
return session;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index bb4dce8fd0405..449a96e358ad5 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4844,7 +4844,7 @@ static void __skb_complete_tx_timestamp(struct sk_buff *skb,
serr->ee.ee_data = skb_shinfo(skb)->tskey;
if (sk->sk_protocol == IPPROTO_TCP &&
sk->sk_type == SOCK_STREAM)
- serr->ee.ee_data -= sk->sk_tskey;
+ serr->ee.ee_data -= atomic_read(&sk->sk_tskey);
}
err = sock_queue_err_skb(sk, skb);
diff --git a/net/core/sock.c b/net/core/sock.c
index 6ea317f84edd2..deaed1b206823 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -866,9 +866,9 @@ int sock_set_timestamping(struct sock *sk, int optname,
if ((1 << sk->sk_state) &
(TCPF_CLOSE | TCPF_LISTEN))
return -EINVAL;
- sk->sk_tskey = tcp_sk(sk)->snd_una;
+ atomic_set(&sk->sk_tskey, tcp_sk(sk)->snd_una);
} else {
- sk->sk_tskey = 0;
+ atomic_set(&sk->sk_tskey, 0);
}
}
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index a4d2eb691cbc1..131066d0319a2 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -992,7 +992,7 @@ static int __ip_append_data(struct sock *sk,
if (cork->tx_flags & SKBTX_ANY_SW_TSTAMP &&
sk->sk_tsflags & SOF_TIMESTAMPING_OPT_ID)
- tskey = sk->sk_tskey++;
+ tskey = atomic_inc_return(&sk->sk_tskey) - 1;
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index ff4e83e2a5068..22bf8fb617165 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1465,7 +1465,7 @@ static int __ip6_append_data(struct sock *sk,
if (cork->tx_flags & SKBTX_ANY_SW_TSTAMP &&
sk->sk_tsflags & SOF_TIMESTAMPING_OPT_ID)
- tskey = sk->sk_tskey++;
+ tskey = atomic_inc_return(&sk->sk_tskey) - 1;
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 089/139] RDMA/rtrs-clt: Fix possible double free in error case
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 088/139] net-timestamp: convert sk->sk_tskey to atomic_t Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 090/139] RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close Greg Kroah-Hartman
` (59 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Md Haris Iqbal,
Jack Wang, Jason Gunthorpe, Sasha Levin
From: Md Haris Iqbal <haris.iqbal@ionos.com>
[ Upstream commit 8700af2cc18c919b2a83e74e0479038fd113c15d ]
Callback function rtrs_clt_dev_release() for put_device() calls kfree(clt)
to free memory. We shouldn't call kfree(clt) again, and we can't use the
clt after kfree too.
Replace device_register() with device_initialize() and device_add() so that
dev_set_name can() be used appropriately.
Move mutex_destroy() to the release function so it can be called in
the alloc_clt err path.
Fixes: eab098246625 ("RDMA/rtrs-clt: Refactor the failure cases in alloc_clt")
Link: https://lore.kernel.org/r/20220217030929.323849-1-haris.iqbal@ionos.com
Reported-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/rtrs/rtrs-clt.c | 37 ++++++++++++++------------
1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index 55ebe01ec9951..3272514f05405 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -2664,6 +2664,8 @@ static void rtrs_clt_dev_release(struct device *dev)
{
struct rtrs_clt *clt = container_of(dev, struct rtrs_clt, dev);
+ mutex_destroy(&clt->paths_ev_mutex);
+ mutex_destroy(&clt->paths_mutex);
kfree(clt);
}
@@ -2693,6 +2695,8 @@ static struct rtrs_clt *alloc_clt(const char *sessname, size_t paths_num,
return ERR_PTR(-ENOMEM);
}
+ clt->dev.class = rtrs_clt_dev_class;
+ clt->dev.release = rtrs_clt_dev_release;
uuid_gen(&clt->paths_uuid);
INIT_LIST_HEAD_RCU(&clt->paths_list);
clt->paths_num = paths_num;
@@ -2709,43 +2713,41 @@ static struct rtrs_clt *alloc_clt(const char *sessname, size_t paths_num,
init_waitqueue_head(&clt->permits_wait);
mutex_init(&clt->paths_ev_mutex);
mutex_init(&clt->paths_mutex);
+ device_initialize(&clt->dev);
- clt->dev.class = rtrs_clt_dev_class;
- clt->dev.release = rtrs_clt_dev_release;
err = dev_set_name(&clt->dev, "%s", sessname);
if (err)
- goto err;
+ goto err_put;
+
/*
* Suppress user space notification until
* sysfs files are created
*/
dev_set_uevent_suppress(&clt->dev, true);
- err = device_register(&clt->dev);
- if (err) {
- put_device(&clt->dev);
- goto err;
- }
+ err = device_add(&clt->dev);
+ if (err)
+ goto err_put;
clt->kobj_paths = kobject_create_and_add("paths", &clt->dev.kobj);
if (!clt->kobj_paths) {
err = -ENOMEM;
- goto err_dev;
+ goto err_del;
}
err = rtrs_clt_create_sysfs_root_files(clt);
if (err) {
kobject_del(clt->kobj_paths);
kobject_put(clt->kobj_paths);
- goto err_dev;
+ goto err_del;
}
dev_set_uevent_suppress(&clt->dev, false);
kobject_uevent(&clt->dev.kobj, KOBJ_ADD);
return clt;
-err_dev:
- device_unregister(&clt->dev);
-err:
+err_del:
+ device_del(&clt->dev);
+err_put:
free_percpu(clt->pcpu_path);
- kfree(clt);
+ put_device(&clt->dev);
return ERR_PTR(err);
}
@@ -2753,9 +2755,10 @@ static void free_clt(struct rtrs_clt *clt)
{
free_permits(clt);
free_percpu(clt->pcpu_path);
- mutex_destroy(&clt->paths_ev_mutex);
- mutex_destroy(&clt->paths_mutex);
- /* release callback will free clt in last put */
+
+ /*
+ * release callback will free clt and destroy mutexes in last put
+ */
device_unregister(&clt->dev);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 090/139] RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 089/139] RDMA/rtrs-clt: Fix possible double free in error case Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 091/139] bnxt_en: Increase firmware message response DMA wait time Greg Kroah-Hartman
` (58 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Md Haris Iqbal, Jack Wang,
Jason Gunthorpe, Sasha Levin
From: Md Haris Iqbal <haris.iqbal@ionos.com>
[ Upstream commit c46fa8911b17e3f808679061a8af8bee219f4602 ]
Error path of rtrs_clt_open() calls free_clt(), where free_permit is
called. This is wrong since error path of rtrs_clt_open() does not need
to call free_permit().
Also, moving free_permits() call to rtrs_clt_close(), makes it more
aligned with the call to alloc_permit() in rtrs_clt_open().
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20220217030929.323849-2-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index 3272514f05405..a23438bacf12c 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -2753,7 +2753,6 @@ static struct rtrs_clt *alloc_clt(const char *sessname, size_t paths_num,
static void free_clt(struct rtrs_clt *clt)
{
- free_permits(clt);
free_percpu(clt->pcpu_path);
/*
@@ -2869,6 +2868,7 @@ void rtrs_clt_close(struct rtrs_clt *clt)
rtrs_clt_destroy_sess_files(sess, NULL);
kobject_put(&sess->kobj);
}
+ free_permits(clt);
free_clt(clt);
}
EXPORT_SYMBOL(rtrs_clt_close);
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 091/139] bnxt_en: Increase firmware message response DMA wait time
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 090/139] RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 092/139] configfs: fix a race in configfs_{,un}register_subsystem() Greg Kroah-Hartman
` (57 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladimir Olovyannikov, Michael Chan,
David S. Miller, Sasha Levin
From: Michael Chan <michael.chan@broadcom.com>
[ Upstream commit b891106da52b2c12dbaf73400f6d225b06a38d80 ]
When polling for the firmware message response, we first poll for the
response message header. Once the valid length is detected in the
header, we poll for the valid bit at the end of the message which
signals DMA completion. Normally, this poll time for DMA completion
is extremely short (0 to a few usec). But on some devices under some
rare conditions, it can be up to about 20 msec.
Increase this delay to 50 msec and use udelay() for the first 10 usec
for the common case, and usleep_range() beyond that.
Also, change the error message to include the above delay time when
printing the timeout value.
Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file")
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 12 +++++++++---
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h | 2 +-
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
index 8171f4912fa01..3a0eeb3737767 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
@@ -595,18 +595,24 @@ static int __hwrm_send(struct bnxt *bp, struct bnxt_hwrm_ctx *ctx)
/* Last byte of resp contains valid bit */
valid = ((u8 *)ctx->resp) + len - 1;
- for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) {
+ for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; ) {
/* make sure we read from updated DMA memory */
dma_rmb();
if (*valid)
break;
- usleep_range(1, 5);
+ if (j < 10) {
+ udelay(1);
+ j++;
+ } else {
+ usleep_range(20, 30);
+ j += 20;
+ }
}
if (j >= HWRM_VALID_BIT_DELAY_USEC) {
if (!(ctx->flags & BNXT_HWRM_CTX_SILENT))
netdev_err(bp->dev, "Error (timeout: %u) msg {0x%x 0x%x} len:%d v:%d\n",
- hwrm_total_timeout(i),
+ hwrm_total_timeout(i) + j,
le16_to_cpu(ctx->req->req_type),
le16_to_cpu(ctx->req->seq_id), len,
*valid);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
index 9a9fc4e8041b6..380ef69afb51b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
@@ -94,7 +94,7 @@ static inline unsigned int hwrm_total_timeout(unsigned int n)
}
-#define HWRM_VALID_BIT_DELAY_USEC 150
+#define HWRM_VALID_BIT_DELAY_USEC 50000
static inline bool bnxt_cfa_hwrm_message(u16 req_type)
{
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 092/139] configfs: fix a race in configfs_{,un}register_subsystem()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 091/139] bnxt_en: Increase firmware message response DMA wait time Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 093/139] RDMA/ib_srp: Fix a deadlock Greg Kroah-Hartman
` (56 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, ChenXiaoSong, Laibin Qiu,
Christoph Hellwig, Sasha Levin
From: ChenXiaoSong <chenxiaosong2@huawei.com>
[ Upstream commit 84ec758fb2daa236026506868c8796b0500c047d ]
When configfs_register_subsystem() or configfs_unregister_subsystem()
is executing link_group() or unlink_group(),
it is possible that two processes add or delete list concurrently.
Some unfortunate interleavings of them can cause kernel panic.
One of cases is:
A --> B --> C --> D
A <-- B <-- C <-- D
delete list_head *B | delete list_head *C
--------------------------------|-----------------------------------
configfs_unregister_subsystem | configfs_unregister_subsystem
unlink_group | unlink_group
unlink_obj | unlink_obj
list_del_init | list_del_init
__list_del_entry | __list_del_entry
__list_del | __list_del
// next == C |
next->prev = prev |
| next->prev = prev
prev->next = next |
| // prev == B
| prev->next = next
Fix this by adding mutex when calling link_group() or unlink_group(),
but parent configfs_subsystem is NULL when config_item is root.
So I create a mutex configfs_subsystem_mutex.
Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/configfs/dir.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index d3cd2a94d1e8c..d1f9d26322027 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -34,6 +34,14 @@
*/
DEFINE_SPINLOCK(configfs_dirent_lock);
+/*
+ * All of link_obj/unlink_obj/link_group/unlink_group require that
+ * subsys->su_mutex is held.
+ * But parent configfs_subsystem is NULL when config_item is root.
+ * Use this mutex when config_item is root.
+ */
+static DEFINE_MUTEX(configfs_subsystem_mutex);
+
static void configfs_d_iput(struct dentry * dentry,
struct inode * inode)
{
@@ -1859,7 +1867,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
group->cg_item.ci_name = group->cg_item.ci_namebuf;
sd = root->d_fsdata;
+ mutex_lock(&configfs_subsystem_mutex);
link_group(to_config_group(sd->s_element), group);
+ mutex_unlock(&configfs_subsystem_mutex);
inode_lock_nested(d_inode(root), I_MUTEX_PARENT);
@@ -1884,7 +1894,9 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
inode_unlock(d_inode(root));
if (err) {
+ mutex_lock(&configfs_subsystem_mutex);
unlink_group(group);
+ mutex_unlock(&configfs_subsystem_mutex);
configfs_release_fs();
}
put_fragment(frag);
@@ -1931,7 +1943,9 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys)
dput(dentry);
+ mutex_lock(&configfs_subsystem_mutex);
unlink_group(group);
+ mutex_unlock(&configfs_subsystem_mutex);
configfs_release_fs();
}
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 093/139] RDMA/ib_srp: Fix a deadlock
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 092/139] configfs: fix a race in configfs_{,un}register_subsystem() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 094/139] tracing: Dump stacktrace trigger to the corresponding instance Greg Kroah-Hartman
` (55 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+831661966588c802aae9,
Bart Van Assche, Leon Romanovsky, Jason Gunthorpe, Sasha Levin
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit 081bdc9fe05bb23248f5effb6f811da3da4b8252 ]
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync()
Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org
Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD")
Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/srp/ib_srp.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 71eda91e810cf..5d416ec228717 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -4038,9 +4038,11 @@ static void srp_remove_one(struct ib_device *device, void *client_data)
spin_unlock(&host->target_lock);
/*
- * Wait for tl_err and target port removal tasks.
+ * srp_queue_remove_work() queues a call to
+ * srp_remove_target(). The latter function cancels
+ * target->tl_err_work so waiting for the remove works to
+ * finish is sufficient.
*/
- flush_workqueue(system_long_wq);
flush_workqueue(srp_remove_wq);
kfree(host);
--
2.34.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 094/139] tracing: Dump stacktrace trigger to the corresponding instance
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 093/139] RDMA/ib_srp: Fix a deadlock Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 095/139] tracing: Have traceon and traceoff trigger honor the instance Greg Kroah-Hartman
` (54 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tom Zanussi,
Daniel Bristot de Oliveira, Steven Rostedt (Google)
From: Daniel Bristot de Oliveira <bristot@kernel.org>
commit ce33c845b030c9cf768370c951bc699470b09fa7 upstream.
The stacktrace event trigger is not dumping the stacktrace to the instance
where it was enabled, but to the global "instance."
Use the private_data, pointing to the trigger file, to figure out the
corresponding trace instance, and use it in the trigger action, like
snapshot_trigger does.
Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace_events_trigger.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -1200,7 +1200,12 @@ stacktrace_trigger(struct event_trigger_
struct trace_buffer *buffer, void *rec,
struct ring_buffer_event *event)
{
- trace_dump_stack(STACK_SKIP);
+ struct trace_event_file *file = data->private_data;
+
+ if (file)
+ __trace_stack(file->tr, tracing_gen_ctx(), STACK_SKIP);
+ else
+ trace_dump_stack(STACK_SKIP);
}
static void
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 095/139] tracing: Have traceon and traceoff trigger honor the instance
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 094/139] tracing: Dump stacktrace trigger to the corresponding instance Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 096/139] iio:imu:adis16480: fix buffering for devices with no burst mode Greg Kroah-Hartman
` (53 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Bristot de Oliveira,
Tom Zanussi, Steven Rostedt (Google)
From: Steven Rostedt (Google) <rostedt@goodmis.org>
commit 302e9edd54985f584cfc180098f3554774126969 upstream.
If a trigger is set on an event to disable or enable tracing within an
instance, then tracing should be disabled or enabled in the instance and
not at the top level, which is confusing to users.
Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home
Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace_events_trigger.c | 52 +++++++++++++++++++++++++++++++-----
1 file changed, 46 insertions(+), 6 deletions(-)
--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -955,6 +955,16 @@ traceon_trigger(struct event_trigger_dat
struct trace_buffer *buffer, void *rec,
struct ring_buffer_event *event)
{
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (tracer_tracing_is_on(file->tr))
+ return;
+
+ tracer_tracing_on(file->tr);
+ return;
+ }
+
if (tracing_is_on())
return;
@@ -966,8 +976,15 @@ traceon_count_trigger(struct event_trigg
struct trace_buffer *buffer, void *rec,
struct ring_buffer_event *event)
{
- if (tracing_is_on())
- return;
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (tracer_tracing_is_on(file->tr))
+ return;
+ } else {
+ if (tracing_is_on())
+ return;
+ }
if (!data->count)
return;
@@ -975,7 +992,10 @@ traceon_count_trigger(struct event_trigg
if (data->count != -1)
(data->count)--;
- tracing_on();
+ if (file)
+ tracer_tracing_on(file->tr);
+ else
+ tracing_on();
}
static void
@@ -983,6 +1003,16 @@ traceoff_trigger(struct event_trigger_da
struct trace_buffer *buffer, void *rec,
struct ring_buffer_event *event)
{
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (!tracer_tracing_is_on(file->tr))
+ return;
+
+ tracer_tracing_off(file->tr);
+ return;
+ }
+
if (!tracing_is_on())
return;
@@ -994,8 +1024,15 @@ traceoff_count_trigger(struct event_trig
struct trace_buffer *buffer, void *rec,
struct ring_buffer_event *event)
{
- if (!tracing_is_on())
- return;
+ struct trace_event_file *file = data->private_data;
+
+ if (file) {
+ if (!tracer_tracing_is_on(file->tr))
+ return;
+ } else {
+ if (!tracing_is_on())
+ return;
+ }
if (!data->count)
return;
@@ -1003,7 +1040,10 @@ traceoff_count_trigger(struct event_trig
if (data->count != -1)
(data->count)--;
- tracing_off();
+ if (file)
+ tracer_tracing_off(file->tr);
+ else
+ tracing_off();
}
static int
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 096/139] iio:imu:adis16480: fix buffering for devices with no burst mode
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 095/139] tracing: Have traceon and traceoff trigger honor the instance Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 097/139] iio: adc: men_z188_adc: Fix a resource leak in an error handling path Greg Kroah-Hartman
` (52 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Julia Pineda, Nuno Sá,
Stable, Jonathan Cameron
From: Nuno Sá <nuno.sa@analog.com>
commit b0e85f95e30d4d2dc22ea123a30dba36406879a1 upstream.
The trigger handler defined in the driver assumes that burst mode is
being used. Hence, for devices that do not support it, we have to use
the adis library default trigger implementation.
Tested-by: Julia Pineda <julia.pineda@analog.com>
Fixes: 941f130881fa9 ("iio: adis16480: support burst read function")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220114132608.241-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16480.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index ed129321a14d..f9b4540db1f4 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -1403,6 +1403,7 @@ static int adis16480_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
const struct adis_data *adis16480_data;
+ irq_handler_t trigger_handler = NULL;
struct iio_dev *indio_dev;
struct adis16480 *st;
int ret;
@@ -1474,8 +1475,12 @@ static int adis16480_probe(struct spi_device *spi)
st->clk_freq = st->chip_info->int_clk;
}
+ /* Only use our trigger handler if burst mode is supported */
+ if (adis16480_data->burst_len)
+ trigger_handler = adis16480_trigger_handler;
+
ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev,
- adis16480_trigger_handler);
+ trigger_handler);
if (ret)
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 097/139] iio: adc: men_z188_adc: Fix a resource leak in an error handling path
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 096/139] iio:imu:adis16480: fix buffering for devices with no burst mode Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 098/139] iio: adc: tsc2046: fix memory corruption by preventing array overflow Greg Kroah-Hartman
` (51 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Stable, Jonathan Cameron
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
commit e0a2e37f303828d030a83f33ffe14b36cb88d563 upstream.
If iio_device_register() fails, a previous ioremap() is left unbalanced.
Update the error handling path and add the missing iounmap() call, as
already done in the remove function.
Fixes: 74aeac4da66f ("iio: adc: Add MEN 16z188 ADC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.1643445149.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/men_z188_adc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/men_z188_adc.c
+++ b/drivers/iio/adc/men_z188_adc.c
@@ -103,6 +103,7 @@ static int men_z188_probe(struct mcb_dev
struct z188_adc *adc;
struct iio_dev *indio_dev;
struct resource *mem;
+ int ret;
indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct z188_adc));
if (!indio_dev)
@@ -128,8 +129,14 @@ static int men_z188_probe(struct mcb_dev
adc->mem = mem;
mcb_set_drvdata(dev, indio_dev);
- return iio_device_register(indio_dev);
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto err_unmap;
+ return 0;
+
+err_unmap:
+ iounmap(adc->base);
err:
mcb_release_mem(mem);
return -ENXIO;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 098/139] iio: adc: tsc2046: fix memory corruption by preventing array overflow
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 097/139] iio: adc: men_z188_adc: Fix a resource leak in an error handling path Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 099/139] iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits Greg Kroah-Hartman
` (50 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleksij Rempel, Stable, Jonathan Cameron
From: Oleksij Rempel <o.rempel@pengutronix.de>
commit b7a78a8adaa8849c02f174d707aead0f85dca0da upstream.
On one side we have indio_dev->num_channels includes all physical channels +
timestamp channel. On other side we have an array allocated only for
physical channels. So, fix memory corruption by ARRAY_SIZE() instead of
num_channels variable.
Note the first case is a cleanup rather than a fix as the software
timestamp channel bit in active_scanmask is never set by the IIO core.
Fixes: 9374e8f5a38d ("iio: adc: add ADC driver for the TI TSC2046 controller")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220107081401.2816357-1-o.rempel@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ti-tsc2046.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
index d84ae6b008c1..e8fc4d01f30b 100644
--- a/drivers/iio/adc/ti-tsc2046.c
+++ b/drivers/iio/adc/ti-tsc2046.c
@@ -388,7 +388,7 @@ static int tsc2046_adc_update_scan_mode(struct iio_dev *indio_dev,
mutex_lock(&priv->slock);
size = 0;
- for_each_set_bit(ch_idx, active_scan_mask, indio_dev->num_channels) {
+ for_each_set_bit(ch_idx, active_scan_mask, ARRAY_SIZE(priv->l)) {
size += tsc2046_adc_group_set_layout(priv, group, ch_idx);
tsc2046_adc_group_set_cmd(priv, group, ch_idx);
group++;
@@ -548,7 +548,7 @@ static int tsc2046_adc_setup_spi_msg(struct tsc2046_adc_priv *priv)
* enabled.
*/
size = 0;
- for (ch_idx = 0; ch_idx < priv->dcfg->num_channels; ch_idx++)
+ for (ch_idx = 0; ch_idx < ARRAY_SIZE(priv->l); ch_idx++)
size += tsc2046_adc_group_set_layout(priv, ch_idx, ch_idx);
priv->tx = devm_kzalloc(&priv->spi->dev, size, GFP_KERNEL);
--
2.35.1
^ permalink raw reply related [flat|nested] 151+ messages in thread* [PATCH 5.15 099/139] iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 098/139] iio: adc: tsc2046: fix memory corruption by preventing array overflow Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 100/139] iio: accel: fxls8962af: add padding to regmap for SPI Greg Kroah-Hartman
` (49 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Cosmin Tanislav, Stable, Jonathan Cameron
From: Cosmin Tanislav <demonsingur@gmail.com>
commit 0e33d15f1dce9e3a80a970ea7f0b27837168aeca upstream.
According to page 90 of the datasheet [1], AIN_BUFP is bit 6 and
AIN_BUFM is bit 5 of the CONFIG_0 -> CONFIG_7 registers.
Fix the mask used for setting these bits.
[1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7124-8.pdf
Fixes: 0eaecea6e487 ("iio: adc: ad7124: Add buffered input support")
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20220112200036.694490-1-cosmin.tanislav@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad7124.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -76,7 +76,7 @@
#define AD7124_CONFIG_REF_SEL(x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
#define AD7124_CONFIG_PGA_MSK GENMASK(2, 0)
#define AD7124_CONFIG_PGA(x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
-#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(7, 6)
+#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(6, 5)
#define AD7124_CONFIG_IN_BUFF(x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)
/* AD7124_FILTER_X */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 100/139] iio: accel: fxls8962af: add padding to regmap for SPI
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 099/139] iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 101/139] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot Greg Kroah-Hartman
` (48 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Nyekjaer, Stable, Jonathan Cameron
From: Sean Nyekjaer <sean@geanix.com>
commit ccbed9d8d2a5351d8238f2d3f0741c9a3176f752 upstream.
Add missing don't care padding between address and
data for SPI transfers
Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20211220125144.3630539-1-sean@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/fxls8962af-core.c | 12 ++++++++++--
drivers/iio/accel/fxls8962af-i2c.c | 2 +-
drivers/iio/accel/fxls8962af-spi.c | 2 +-
drivers/iio/accel/fxls8962af.h | 3 ++-
4 files changed, 14 insertions(+), 5 deletions(-)
--- a/drivers/iio/accel/fxls8962af-core.c
+++ b/drivers/iio/accel/fxls8962af-core.c
@@ -154,12 +154,20 @@ struct fxls8962af_data {
u8 watermark;
};
-const struct regmap_config fxls8962af_regmap_conf = {
+const struct regmap_config fxls8962af_i2c_regmap_conf = {
.reg_bits = 8,
.val_bits = 8,
.max_register = FXLS8962AF_MAX_REG,
};
-EXPORT_SYMBOL_GPL(fxls8962af_regmap_conf);
+EXPORT_SYMBOL_GPL(fxls8962af_i2c_regmap_conf);
+
+const struct regmap_config fxls8962af_spi_regmap_conf = {
+ .reg_bits = 8,
+ .pad_bits = 8,
+ .val_bits = 8,
+ .max_register = FXLS8962AF_MAX_REG,
+};
+EXPORT_SYMBOL_GPL(fxls8962af_spi_regmap_conf);
enum {
fxls8962af_idx_x,
--- a/drivers/iio/accel/fxls8962af-i2c.c
+++ b/drivers/iio/accel/fxls8962af-i2c.c
@@ -18,7 +18,7 @@ static int fxls8962af_probe(struct i2c_c
{
struct regmap *regmap;
- regmap = devm_regmap_init_i2c(client, &fxls8962af_regmap_conf);
+ regmap = devm_regmap_init_i2c(client, &fxls8962af_i2c_regmap_conf);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to initialize i2c regmap\n");
return PTR_ERR(regmap);
--- a/drivers/iio/accel/fxls8962af-spi.c
+++ b/drivers/iio/accel/fxls8962af-spi.c
@@ -18,7 +18,7 @@ static int fxls8962af_probe(struct spi_d
{
struct regmap *regmap;
- regmap = devm_regmap_init_spi(spi, &fxls8962af_regmap_conf);
+ regmap = devm_regmap_init_spi(spi, &fxls8962af_spi_regmap_conf);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "Failed to initialize spi regmap\n");
return PTR_ERR(regmap);
--- a/drivers/iio/accel/fxls8962af.h
+++ b/drivers/iio/accel/fxls8962af.h
@@ -17,6 +17,7 @@ int fxls8962af_core_probe(struct device
int fxls8962af_core_remove(struct device *dev);
extern const struct dev_pm_ops fxls8962af_pm_ops;
-extern const struct regmap_config fxls8962af_regmap_conf;
+extern const struct regmap_config fxls8962af_i2c_regmap_conf;
+extern const struct regmap_config fxls8962af_spi_regmap_conf;
#endif /* _FXLS8962AF_H_ */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 101/139] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 100/139] iio: accel: fxls8962af: add padding to regmap for SPI Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 102/139] iio: Fix error handling for PM Greg Kroah-Hartman
` (47 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mario Tesi, Lorenzo Bianconi, Stable,
Jonathan Cameron
From: Lorenzo Bianconi <lorenzo@kernel.org>
commit ea85bf906466191b58532bb19f4fbb4591f0a77e upstream.
We need to wait for sensor settling time (~ 3/ODR) before reading data
in st_lsm6dsx_read_oneshot routine in order to avoid corrupted samples.
Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver")
Reported-by: Mario Tesi <mario.tesi@st.com>
Tested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/b41ebda5535895298716c76d939f9f165fcd2d13.1644098120.git.lorenzo@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1372,8 +1372,12 @@ static int st_lsm6dsx_read_oneshot(struc
if (err < 0)
return err;
+ /*
+ * we need to wait for sensor settling time before
+ * reading data in order to avoid corrupted samples
+ */
delay = 1000000000 / sensor->odr;
- usleep_range(delay, 2 * delay);
+ usleep_range(3 * delay, 4 * delay);
err = st_lsm6dsx_read_locked(hw, addr, &data, sizeof(data));
if (err < 0)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 102/139] iio: Fix error handling for PM
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 101/139] iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 103/139] sc16is7xx: Fix for incorrect data being transmitted Greg Kroah-Hartman
` (46 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Andy Shevchenko,
Stable, Jonathan Cameron
From: Miaoqian Lin <linmq006@gmail.com>
commit 632fe0bb8c5b9c06ec961f575ee42a6fff5eceeb upstream.
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). In the PM Runtime docs:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.
Fix this problem for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553.
Fixes: 7d0ead5c3f00 ("iio: Reconcile operation order between iio_register/unregister and pm functions")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/bmc150-accel-core.c | 5 ++++-
drivers/iio/accel/kxcjk-1013.c | 5 ++++-
drivers/iio/accel/mma9551.c | 5 ++++-
drivers/iio/accel/mma9553.c | 5 ++++-
drivers/iio/gyro/bmg160_core.c | 5 ++++-
drivers/iio/imu/kmx61.c | 5 ++++-
drivers/iio/magnetometer/bmc150_magn.c | 5 +++--
7 files changed, 27 insertions(+), 8 deletions(-)
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -1782,11 +1782,14 @@ int bmc150_accel_core_probe(struct devic
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "Unable to register iio device\n");
- goto err_trigger_unregister;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_disable(dev);
err_trigger_unregister:
bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
err_buffer_cleanup:
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1589,11 +1589,14 @@ static int kxcjk1013_probe(struct i2c_cl
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "unable to register iio device\n");
- goto err_buffer_cleanup;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
--- a/drivers/iio/accel/mma9551.c
+++ b/drivers/iio/accel/mma9551.c
@@ -495,11 +495,14 @@ static int mma9551_probe(struct i2c_clie
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "unable to register iio device\n");
- goto out_poweroff;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
out_poweroff:
mma9551_set_device_state(client, false);
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -1134,12 +1134,15 @@ static int mma9553_probe(struct i2c_clie
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "unable to register iio device\n");
- goto out_poweroff;
+ goto err_pm_cleanup;
}
dev_dbg(&indio_dev->dev, "Registered device %s\n", name);
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
out_poweroff:
mma9551_set_device_state(client, false);
return ret;
--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -1188,11 +1188,14 @@ int bmg160_core_probe(struct device *dev
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "unable to register iio device\n");
- goto err_buffer_cleanup;
+ goto err_pm_cleanup;
}
return 0;
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_disable(dev);
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
--- a/drivers/iio/imu/kmx61.c
+++ b/drivers/iio/imu/kmx61.c
@@ -1385,7 +1385,7 @@ static int kmx61_probe(struct i2c_client
ret = iio_device_register(data->acc_indio_dev);
if (ret < 0) {
dev_err(&client->dev, "Failed to register acc iio device\n");
- goto err_buffer_cleanup_mag;
+ goto err_pm_cleanup;
}
ret = iio_device_register(data->mag_indio_dev);
@@ -1398,6 +1398,9 @@ static int kmx61_probe(struct i2c_client
err_iio_unregister_acc:
iio_device_unregister(data->acc_indio_dev);
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(&client->dev);
+ pm_runtime_disable(&client->dev);
err_buffer_cleanup_mag:
if (client->irq > 0)
iio_triggered_buffer_cleanup(data->mag_indio_dev);
--- a/drivers/iio/magnetometer/bmc150_magn.c
+++ b/drivers/iio/magnetometer/bmc150_magn.c
@@ -962,13 +962,14 @@ int bmc150_magn_probe(struct device *dev
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "unable to register iio device\n");
- goto err_disable_runtime_pm;
+ goto err_pm_cleanup;
}
dev_dbg(dev, "Registered device %s\n", name);
return 0;
-err_disable_runtime_pm:
+err_pm_cleanup:
+ pm_runtime_dont_use_autosuspend(dev);
pm_runtime_disable(dev);
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 103/139] sc16is7xx: Fix for incorrect data being transmitted
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 102/139] iio: Fix error handling for PM Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 104/139] ata: pata_hpt37x: disable primary channel on HPT371 Greg Kroah-Hartman
` (45 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Phil Elwell
From: Phil Elwell <phil@raspberrypi.com>
commit eebb0f4e894f1e9577a56b337693d1051dd6ebfd upstream.
UART drivers are meant to use the port spinlock within certain
methods, to protect against reentrancy. The sc16is7xx driver does
very little locking, presumably because when added it triggers
"scheduling while atomic" errors. This is due to the use of mutexes
within the regmap abstraction layer, and the mutex implementation's
habit of sleeping the current thread while waiting for access.
Unfortunately this lack of interlocking can lead to corruption of
outbound data, which occurs when the buffer used for I2C transmission
is used simultaneously by two threads - a work queue thread running
sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both
of which can call sc16is7xx_handle_tx.
An earlier patch added efr_lock, a mutex that controls access to the
EFR register. This mutex is already claimed in the IRQ handler, and
all that is required is to claim the same mutex in sc16is7xx_tx_proc.
See: https://github.com/raspberrypi/linux/issues/4885
Fixes: 6393ff1c4435 ("sc16is7xx: Use threaded IRQ")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20220216160802.1026013-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/sc16is7xx.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -734,12 +734,15 @@ static irqreturn_t sc16is7xx_irq(int irq
static void sc16is7xx_tx_proc(struct kthread_work *ws)
{
struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port);
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
if ((port->rs485.flags & SER_RS485_ENABLED) &&
(port->rs485.delay_rts_before_send > 0))
msleep(port->rs485.delay_rts_before_send);
+ mutex_lock(&s->efr_lock);
sc16is7xx_handle_tx(port);
+ mutex_unlock(&s->efr_lock);
}
static void sc16is7xx_reconf_rs485(struct uart_port *port)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 104/139] ata: pata_hpt37x: disable primary channel on HPT371
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 103/139] sc16is7xx: Fix for incorrect data being transmitted Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 105/139] Revert "USB: serial: ch341: add new Product ID for CH341A" Greg Kroah-Hartman
` (44 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sergey Shtylyov, Damien Le Moal
From: Sergey Shtylyov <s.shtylyov@omp.ru>
commit 8d093e02e898b24c58788b0289e3202317a96d2a upstream.
The HPT371 chip physically has only one channel, the secondary one,
however the primary channel registers do exist! Thus we have to
manually disable the non-existing channel if the BIOS hasn't done this
already. Similarly to the pata_hpt3x2n driver, always disable the
primary channel.
Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/pata_hpt37x.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -920,6 +920,20 @@ static int hpt37x_init_one(struct pci_de
pci_write_config_byte(dev, 0x5a, irqmask);
/*
+ * HPT371 chips physically have only one channel, the secondary one,
+ * but the primary channel registers do exist! Go figure...
+ * So, we manually disable the non-existing channel here
+ * (if the BIOS hasn't done this already).
+ */
+ if (dev->device == PCI_DEVICE_ID_TTI_HPT371) {
+ u8 mcr1;
+
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ mcr1 &= ~0x04;
+ pci_write_config_byte(dev, 0x50, mcr1);
+ }
+
+ /*
* default to pci clock. make sure MA15/16 are set to output
* to prevent drives having problems with 40-pin cables. Needed
* for some drives such as IBM-DTLA which will not enter ready
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 105/139] Revert "USB: serial: ch341: add new Product ID for CH341A"
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 104/139] ata: pata_hpt37x: disable primary channel on HPT371 Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 106/139] usb: gadget: rndis: add spinlock for rndis response list Greg Kroah-Hartman
` (43 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmytro Bagrii, Johan Hovold
From: Dmytro Bagrii <dimich.dmb@gmail.com>
commit 198a7ebd5fa17b4d0be8cb70240ee1be885175c0 upstream.
This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63.
CH341 has Product ID 0x5512 in EPP/MEM mode which is used for
I2C/SPI/GPIO interfaces. In asynchronous serial interface mode
CH341 has PID 0x5523 which is already in the table.
Mode is selected by corresponding jumper setting.
Signed-off-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Link: https://lore.kernel.org/r/20220210164137.4376-1-dimich.dmb@gmail.com
Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/q@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ch341.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -81,7 +81,6 @@
#define CH341_QUIRK_SIMULATE_BREAK BIT(1)
static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x1a86, 0x5512) },
{ USB_DEVICE(0x1a86, 0x5523) },
{ USB_DEVICE(0x1a86, 0x7522) },
{ USB_DEVICE(0x1a86, 0x7523) },
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 106/139] usb: gadget: rndis: add spinlock for rndis response list
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 105/139] Revert "USB: serial: ch341: add new Product ID for CH341A" Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 107/139] USB: gadget: validate endpoint index for xilinx udc Greg Kroah-Hartman
` (42 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, stable, Daehwan Jung
From: Daehwan Jung <dh10.jung@samsung.com>
commit aaaba1c86d04dac8e49bf508b492f81506257da3 upstream.
There's no lock for rndis response list. It could cause list corruption
if there're two different list_add at the same time like below.
It's better to add in rndis_add_response / rndis_free_response
/ rndis_get_next_response to prevent any race condition on response list.
[ 361.894299] [1: irq/191-dwc3:16979] list_add corruption.
next->prev should be prev (ffffff80651764d0),
but was ffffff883dc36f80. (next=ffffff80651764d0).
[ 361.904380] [1: irq/191-dwc3:16979] Call trace:
[ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90
[ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0
[ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84
[ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4
[ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60
[ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0
[ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc
[ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc
[ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec
[ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c
Fixes: f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe")
Cc: stable <stable@kernel.org>
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1645507768-77687-1-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/function/rndis.c | 8 ++++++++
drivers/usb/gadget/function/rndis.h | 1 +
2 files changed, 9 insertions(+)
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -922,6 +922,7 @@ struct rndis_params *rndis_register(void
params->resp_avail = resp_avail;
params->v = v;
INIT_LIST_HEAD(¶ms->resp_queue);
+ spin_lock_init(¶ms->resp_lock);
pr_debug("%s: configNr = %d\n", __func__, i);
return params;
@@ -1015,12 +1016,14 @@ void rndis_free_response(struct rndis_pa
{
rndis_resp_t *r, *n;
+ spin_lock(¶ms->resp_lock);
list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) {
if (r->buf == buf) {
list_del(&r->list);
kfree(r);
}
}
+ spin_unlock(¶ms->resp_lock);
}
EXPORT_SYMBOL_GPL(rndis_free_response);
@@ -1030,14 +1033,17 @@ u8 *rndis_get_next_response(struct rndis
if (!length) return NULL;
+ spin_lock(¶ms->resp_lock);
list_for_each_entry_safe(r, n, ¶ms->resp_queue, list) {
if (!r->send) {
r->send = 1;
*length = r->length;
+ spin_unlock(¶ms->resp_lock);
return r->buf;
}
}
+ spin_unlock(¶ms->resp_lock);
return NULL;
}
EXPORT_SYMBOL_GPL(rndis_get_next_response);
@@ -1054,7 +1060,9 @@ static rndis_resp_t *rndis_add_response(
r->length = length;
r->send = 0;
+ spin_lock(¶ms->resp_lock);
list_add_tail(&r->list, ¶ms->resp_queue);
+ spin_unlock(¶ms->resp_lock);
return r;
}
--- a/drivers/usb/gadget/function/rndis.h
+++ b/drivers/usb/gadget/function/rndis.h
@@ -174,6 +174,7 @@ typedef struct rndis_params {
void (*resp_avail)(void *v);
void *v;
struct list_head resp_queue;
+ spinlock_t resp_lock;
} rndis_params;
/* RNDIS Message parser and other useless functions */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 107/139] USB: gadget: validate endpoint index for xilinx udc
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 106/139] usb: gadget: rndis: add spinlock for rndis response list Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 108/139] tracefs: Set the group ownership in apply_options() not parse_options() Greg Kroah-Hartman
` (41 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Szymon Heidrich, stable
From: Szymon Heidrich <szymon.heidrich@gmail.com>
commit 7f14c7227f342d9932f9b918893c8814f86d2a0d upstream.
Assure that host may not manipulate the index to point
past endpoint array.
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/udc/udc-xilinx.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -1612,6 +1612,8 @@ static void xudc_getstatus(struct xusb_u
break;
case USB_RECIP_ENDPOINT:
epnum = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+ if (epnum >= XUSB_MAX_ENDPOINTS)
+ goto stall;
target_ep = &udc->ep[epnum];
epcfgreg = udc->read_fn(udc->addr + target_ep->offset);
halt = epcfgreg & XUSB_EP_CFG_STALL_MASK;
@@ -1679,6 +1681,10 @@ static void xudc_set_clear_feature(struc
case USB_RECIP_ENDPOINT:
if (!udc->setup.wValue) {
endpoint = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+ if (endpoint >= XUSB_MAX_ENDPOINTS) {
+ xudc_ep0_stall(udc);
+ return;
+ }
target_ep = &udc->ep[endpoint];
outinbit = udc->setup.wIndex & USB_ENDPOINT_DIR_MASK;
outinbit = outinbit >> 7;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 108/139] tracefs: Set the group ownership in apply_options() not parse_options()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 107/139] USB: gadget: validate endpoint index for xilinx udc Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 109/139] USB: serial: option: add support for DW5829e Greg Kroah-Hartman
` (40 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro, Steven Rostedt (Google)
From: Steven Rostedt (Google) <rostedt@goodmis.org>
commit 851e99ebeec3f4a672bb5010cf1ece095acee447 upstream.
Al Viro brought it to my attention that the dentries may not be filled
when the parse_options() is called, causing the call to set_gid() to
possibly crash. It should only be called if parse_options() succeeds
totally anyway.
He suggested the logical place to do the update is in apply_options().
Link: https://lore.kernel.org/all/20220225165219.737025658@goodmis.org/
Link: https://lkml.kernel.org/r/20220225153426.1c4cab6b@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/tracefs/inode.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -264,7 +264,6 @@ static int tracefs_parse_options(char *d
if (!gid_valid(gid))
return -EINVAL;
opts->gid = gid;
- set_gid(tracefs_mount->mnt_root, gid);
break;
case Opt_mode:
if (match_octal(&args[0], &option))
@@ -291,7 +290,9 @@ static int tracefs_apply_options(struct
inode->i_mode |= opts->mode;
inode->i_uid = opts->uid;
- inode->i_gid = opts->gid;
+
+ /* Set all the group ids to the mount option */
+ set_gid(sb->s_root, opts->gid);
return 0;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 109/139] USB: serial: option: add support for DW5829e
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 108/139] tracefs: Set the group ownership in apply_options() not parse_options() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 110/139] USB: serial: option: add Telit LE910R1 compositions Greg Kroah-Hartman
` (39 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Slark Xiao, Johan Hovold
From: Slark Xiao <slark_xiao@163.com>
commit 6ecb3f0b18b320320460a42e40d6fb603f6ded96 upstream.
Dell DW5829e same as DW5821e except CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
There are 2 types product of DW5829e: normal and eSIM.
So we will add 2 PID for DW5829e.
And for each PID, it support MBIM or RMNET.
Let's see test evidence as below:
DW5829e MBIM mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e RMNET mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
DW5829e-eSIM MBIM mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
DW5829e-eSIM RMNET mode:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA
port. So it's banned from serial option driver.
The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220214021401.6264-1-slark_xiao@163.com
[ johan: drop unnecessary reservation of interface 1 ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -198,6 +198,8 @@ static void option_instat_callback(struc
#define DELL_PRODUCT_5821E 0x81d7
#define DELL_PRODUCT_5821E_ESIM 0x81e0
+#define DELL_PRODUCT_5829E_ESIM 0x81e4
+#define DELL_PRODUCT_5829E 0x81e6
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
@@ -1063,6 +1065,10 @@ static const struct usb_device_id option
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM),
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E),
+ .driver_info = RSVD(0) | RSVD(6) },
+ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5829E_ESIM),
+ .driver_info = RSVD(0) | RSVD(6) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 110/139] USB: serial: option: add Telit LE910R1 compositions
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 109/139] USB: serial: option: add support for DW5829e Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 111/139] usb: dwc2: drd: fix soft connect when gadget is unconfigured Greg Kroah-Hartman
` (38 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit cfc4442c642d568014474b6718ccf65dc7ca6099 upstream.
Add support for the following Telit LE910R1 compositions:
0x701a: rndis, tty, tty, tty
0x701b: ecm, tty, tty, tty
0x9201: tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220218134552.4051-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1279,10 +1279,16 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
.driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701a, 0xff), /* Telit LE910R1 (RNDIS) */
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x701b, 0xff), /* Telit LE910R1 (ECM) */
+ .driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9200), /* Telit LE910S1 flashing device */
.driver_info = NCTRL(0) | ZLP },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9201), /* Telit LE910R1 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 111/139] usb: dwc2: drd: fix soft connect when gadget is unconfigured
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 110/139] USB: serial: option: add Telit LE910R1 compositions Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 112/139] usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail Greg Kroah-Hartman
` (37 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Fabrice Gasnier
From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
commit 32fde84362c40961726a5c91f35ad37355ccc0c6 upstream.
When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
new high-speed USB device number ...
device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
- usb_gadget_connect
- dwc2_hsotg_pullup
- dwc2_hsotg_core_connect
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc2/core.h | 2 ++
drivers/usb/dwc2/drd.c | 6 ++++--
2 files changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1417,6 +1417,7 @@ void dwc2_hsotg_core_connect(struct dwc2
void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
#define dwc2_is_device_connected(hsotg) (hsotg->connected)
+#define dwc2_is_device_enabled(hsotg) (hsotg->enabled)
int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg);
int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup);
int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg);
@@ -1453,6 +1454,7 @@ static inline int dwc2_hsotg_set_test_mo
int testmode)
{ return 0; }
#define dwc2_is_device_connected(hsotg) (0)
+#define dwc2_is_device_enabled(hsotg) (0)
static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg)
{ return 0; }
static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg,
--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -109,8 +109,10 @@ static int dwc2_drd_role_sw_set(struct u
already = dwc2_ovr_avalid(hsotg, true);
} else if (role == USB_ROLE_DEVICE) {
already = dwc2_ovr_bvalid(hsotg, true);
- /* This clear DCTL.SFTDISCON bit */
- dwc2_hsotg_core_connect(hsotg);
+ if (dwc2_is_device_enabled(hsotg)) {
+ /* This clear DCTL.SFTDISCON bit */
+ dwc2_hsotg_core_connect(hsotg);
+ }
} else {
if (dwc2_is_device_mode(hsotg)) {
if (!dwc2_ovr_bvalid(hsotg, false))
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 112/139] usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 111/139] usb: dwc2: drd: fix soft connect when gadget is unconfigured Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 113/139] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings Greg Kroah-Hartman
` (36 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, Serge Semin, Hans de Goede
From: Hans de Goede <hdegoede@redhat.com>
commit d7c93a903f33ff35aa0e6b5a8032eb9755b00826 upstream.
Commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY")
fixed an issue where ULPI transfers would timeout if any requests where
send to the phy sometime after init, giving it enough time to auto-suspend.
Commit e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend
regression") changed the behavior to instead of clearing the
DWC3_GUSB2PHYCFG_SUSPHY bit, add an extra sleep when it is set.
But on Bay Trail devices, when phy_set_mode() gets called during init,
this leads to errors like these:
[ 28.451522] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a
[ 28.464089] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a
Add "snps,dis_u2_susphy_quirk" to the settings for Bay Trail devices to
fix this. This restores the old behavior for Bay Trail devices, since
previously the DWC3_GUSB2PHYCFG_SUSPHY bit would get cleared on the first
ulpi_read/_write() and then was never set again.
Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression")
Cc: stable@kernel.org
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/dwc3-pci.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -119,6 +119,13 @@ static const struct property_entry dwc3_
{}
};
+static const struct property_entry dwc3_pci_intel_byt_properties[] = {
+ PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+ PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+ {}
+};
+
static const struct property_entry dwc3_pci_mrfld_properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "otg"),
PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
@@ -161,6 +168,10 @@ static const struct software_node dwc3_p
.properties = dwc3_pci_intel_properties,
};
+static const struct software_node dwc3_pci_intel_byt_swnode = {
+ .properties = dwc3_pci_intel_byt_properties,
+};
+
static const struct software_node dwc3_pci_intel_mrfld_swnode = {
.properties = dwc3_pci_mrfld_properties,
};
@@ -344,7 +355,7 @@ static const struct pci_device_id dwc3_p
(kernel_ulong_t) &dwc3_pci_intel_swnode, },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BYT),
- (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+ (kernel_ulong_t) &dwc3_pci_intel_byt_swnode, },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD),
(kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, },
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 113/139] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 112/139] usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 114/139] usb: dwc3: gadget: Let the interrupt handler disable bottom halves Greg Kroah-Hartman
` (35 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hans de Goede
From: Hans de Goede <hdegoede@redhat.com>
commit 62e3f0afe246720f7646eb1b034a6897dac34405 upstream.
When the Bay Trail phy GPIO mappings where added cs and reset were swapped,
this did not cause any issues sofar, because sofar they were always driven
high/low at the same time.
Note the new mapping has been verified both in /sys/kernel/debug/gpio
output on Android factory images on multiple devices, as well as in
the schematics for some devices.
Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/dwc3-pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -85,8 +85,8 @@ static const struct acpi_gpio_mapping ac
static struct gpiod_lookup_table platform_bytcr_gpios = {
.dev_id = "0000:00:16.0",
.table = {
- GPIO_LOOKUP("INT33FC:00", 54, "reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("INT33FC:02", 14, "cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH),
{}
},
};
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 114/139] usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 113/139] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 115/139] xhci: re-initialize the HC during resume if HCE was set Greg Kroah-Hartman
` (34 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, Marek Szyprowski,
Sebastian Andrzej Siewior
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
commit 84918a89d6efaff075de570b55642b6f4ceeac6d upstream.
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
Link: https://lkml.kernel.org/r/c2a64979-73d1-2c22-e048-c275c9f81558@samsung.com
Fixes: e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"")
Cc: stable <stable@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/Yg/YPejVQH3KkRVd@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4131,9 +4131,11 @@ static irqreturn_t dwc3_thread_interrupt
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
+ local_bh_disable();
spin_lock_irqsave(&dwc->lock, flags);
ret = dwc3_process_event_buf(evt);
spin_unlock_irqrestore(&dwc->lock, flags);
+ local_bh_enable();
return ret;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 115/139] xhci: re-initialize the HC during resume if HCE was set
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 114/139] usb: dwc3: gadget: Let the interrupt handler disable bottom halves Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 116/139] xhci: Prevent futile URB re-submissions due to incorrect return value Greg Kroah-Hartman
` (33 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Puma Hsu, Mathias Nyman
From: Puma Hsu <pumahsu@google.com>
commit 8b328f8002bcf29ef517ee4bf234e09aabec4d2e upstream.
When HCE(Host Controller Error) is set, it means an internal
error condition has been detected. Software needs to re-initialize
the HC, so add this check in xhci resume.
Cc: stable@vger.kernel.org
Signed-off-by: Puma Hsu <pumahsu@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1091,6 +1091,7 @@ int xhci_resume(struct xhci_hcd *xhci, b
int retval = 0;
bool comp_timer_running = false;
bool pending_portevent = false;
+ bool reinit_xhc = false;
if (!hcd->state)
return 0;
@@ -1107,10 +1108,11 @@ int xhci_resume(struct xhci_hcd *xhci, b
set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
spin_lock_irq(&xhci->lock);
- if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend)
- hibernated = true;
- if (!hibernated) {
+ if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+ reinit_xhc = true;
+
+ if (!reinit_xhc) {
/*
* Some controllers might lose power during suspend, so wait
* for controller not ready bit to clear, just as in xHC init.
@@ -1143,12 +1145,17 @@ int xhci_resume(struct xhci_hcd *xhci, b
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
- temp = readl(&xhci->op_regs->status);
}
- /* If restore operation fails, re-initialize the HC during resume */
- if ((temp & STS_SRE) || hibernated) {
+ temp = readl(&xhci->op_regs->status);
+
+ /* re-initialize the HC on Restore Error, or Host Controller Error */
+ if (temp & (STS_SRE | STS_HCE)) {
+ reinit_xhc = true;
+ xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+ }
+ if (reinit_xhc) {
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
!(xhci_all_ports_seen_u0(xhci))) {
del_timer_sync(&xhci->comp_mode_recovery_timer);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 116/139] xhci: Prevent futile URB re-submissions due to incorrect return value.
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 115/139] xhci: re-initialize the HC during resume if HCE was set Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 117/139] nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property Greg Kroah-Hartman
` (32 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hongyu Xie, Mathias Nyman
From: Hongyu Xie <xiehongyu1@kylinos.cn>
commit 243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream.
The -ENODEV return value from xhci_check_args() is incorrectly changed
to -EINVAL in a couple places before propagated further.
xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0.
xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if
the return value of xhci_check_args <= 0.
This causes problems for example r8152_submit_rx, calling usb_submit_urb
in drivers/net/usb/r8152.c.
r8152_submit_rx will never get -ENODEV after submiting an urb when xHC
is halted because xhci_urb_enqueue returns -EINVAL in the very beginning.
[commit message and header edit -Mathias]
Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1611,9 +1611,12 @@ static int xhci_urb_enqueue(struct usb_h
struct urb_priv *urb_priv;
int num_tds;
- if (!urb || xhci_check_args(hcd, urb->dev, urb->ep,
- true, true, __func__) <= 0)
+ if (!urb)
return -EINVAL;
+ ret = xhci_check_args(hcd, urb->dev, urb->ep,
+ true, true, __func__);
+ if (ret <= 0)
+ return ret ? ret : -EINVAL;
slot_id = urb->dev->slot_id;
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
@@ -3330,7 +3333,7 @@ static int xhci_check_streams_endpoint(s
return -EINVAL;
ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
if (ret <= 0)
- return -EINVAL;
+ return ret ? ret : -EINVAL;
if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) {
xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
" descriptor for ep 0x%x does not support streams\n",
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 117/139] nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 116/139] xhci: Prevent futile URB re-submissions due to incorrect return value Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 118/139] mtd: " Greg Kroah-Hartman
` (31 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Kerello, Srinivas Kandagatla
From: Christophe Kerello <christophe.kerello@foss.st.com>
commit f6c052afe6f802d87c74153b7a57c43b2e9faf07 upstream.
Wp-gpios property can be used on NVMEM nodes and the same property can
be also used on MTD NAND nodes. In case of the wp-gpios property is
defined at NAND level node, the GPIO management is done at NAND driver
level. Write protect is disabled when the driver is probed or resumed
and is enabled when the driver is released or suspended.
When no partitions are defined in the NAND DT node, then the NAND DT node
will be passed to NVMEM framework. If wp-gpios property is defined in
this node, the GPIO resource is taken twice and the NAND controller
driver fails to probe.
It would be possible to set config->wp_gpio at MTD level before calling
nvmem_register function but NVMEM framework will toggle this GPIO on
each write when this GPIO should only be controlled at NAND level driver
to ensure that the Write Protect has not been enabled.
A way to fix this conflict is to add a new boolean flag in nvmem_config
named ignore_wp. In case ignore_wp is set, the GPIO resource will
be managed by the provider.
Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nvmem/core.c | 2 +-
include/linux/nvmem-provider.h | 4 +++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -768,7 +768,7 @@ struct nvmem_device *nvmem_register(cons
if (config->wp_gpio)
nvmem->wp_gpio = config->wp_gpio;
- else
+ else if (!config->ignore_wp)
nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp",
GPIOD_OUT_HIGH);
if (IS_ERR(nvmem->wp_gpio)) {
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -66,7 +66,8 @@ struct nvmem_keepout {
* @word_size: Minimum read/write access granularity.
* @stride: Minimum read/write access stride.
* @priv: User context passed to read/write callbacks.
- * @wp-gpio: Write protect pin
+ * @wp-gpio: Write protect pin
+ * @ignore_wp: Write Protect pin is managed by the provider.
*
* Note: A default "nvmem<id>" name will be assigned to the device if
* no name is specified in its configuration. In such case "<id>" is
@@ -88,6 +89,7 @@ struct nvmem_config {
enum nvmem_type type;
bool read_only;
bool root_only;
+ bool ignore_wp;
struct device_node *of_node;
bool no_of_node;
nvmem_reg_read_t reg_read;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 118/139] mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios property
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 117/139] nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 119/139] driver core: Free DMA range map when device is released Greg Kroah-Hartman
` (30 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miquel Raynal, Christophe Kerello,
Srinivas Kandagatla
From: Christophe Kerello <christophe.kerello@foss.st.com>
commit 6c7621890995d089a56a06d11580d185ede7c2f8 upstream.
Wp-gpios property can be used on NVMEM nodes and the same property can
be also used on MTD NAND nodes. In case of the wp-gpios property is
defined at NAND level node, the GPIO management is done at NAND driver
level. Write protect is disabled when the driver is probed or resumed
and is enabled when the driver is released or suspended.
When no partitions are defined in the NAND DT node, then the NAND DT node
will be passed to NVMEM framework. If wp-gpios property is defined in
this node, the GPIO resource is taken twice and the NAND controller
driver fails to probe.
A new Boolean flag named ignore_wp has been added in nvmem_config.
In case ignore_wp is set, it means that the GPIO is handled by the
provider. Lets set this flag in MTD layer to avoid the conflict on
wp_gpios property.
Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin")
Cc: stable@vger.kernel.org
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151432.16605-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/mtdcore.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -546,6 +546,7 @@ static int mtd_nvmem_add(struct mtd_info
config.stride = 1;
config.read_only = true;
config.root_only = true;
+ config.ignore_wp = true;
config.no_of_node = !of_device_is_compatible(node, "nvmem-cells");
config.priv = mtd;
@@ -830,6 +831,7 @@ static struct nvmem_device *mtd_otp_nvme
config.owner = THIS_MODULE;
config.type = NVMEM_TYPE_OTP;
config.root_only = true;
+ config.ignore_wp = true;
config.reg_read = reg_read;
config.size = size;
config.of_node = np;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 119/139] driver core: Free DMA range map when device is released
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 118/139] mtd: " Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 120/139] btrfs: prevent copying too big compressed lzo segment Greg Kroah-Hartman
` (29 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Rob Herring, Mårten Lindahl
From: Mårten Lindahl <marten.lindahl@axis.com>
commit d8f7a5484f2188e9af2d9e4e587587d724501b12 upstream.
When unbinding/binding a driver with DMA mapped memory, the DMA map is
not freed before the driver is reloaded. This leads to a memory leak
when the DMA map is overwritten when reprobing the driver.
This can be reproduced with a platform driver having a dma-range:
dummy {
...
#address-cells = <0x2>;
#size-cells = <0x2>;
ranges;
dma-ranges = <...>;
...
};
and then unbinding/binding it:
~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/unbind
DMA map object 0xffffff800b0ae540 still being held by &pdev->dev
~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/bind
~# echo scan > /sys/kernel/debug/kmemleak
~# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffff800b0ae540 (size 64):
comm "sh", pid 833, jiffies 4295174550 (age 2535.352s)
hex dump (first 32 bytes):
00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 80 00 00 00 00 00 00 00 80 00 00 00 00 ................
backtrace:
[<ffffffefd1694708>] create_object.isra.0+0x108/0x344
[<ffffffefd1d1a850>] kmemleak_alloc+0x8c/0xd0
[<ffffffefd167e2d0>] __kmalloc+0x440/0x6f0
[<ffffffefd1a960a4>] of_dma_get_range+0x124/0x220
[<ffffffefd1a8ce90>] of_dma_configure_id+0x40/0x2d0
[<ffffffefd198b68c>] platform_dma_configure+0x5c/0xa4
[<ffffffefd198846c>] really_probe+0x8c/0x514
[<ffffffefd1988990>] __driver_probe_device+0x9c/0x19c
[<ffffffefd1988cd8>] device_driver_attach+0x54/0xbc
[<ffffffefd1986634>] bind_store+0xc4/0x120
[<ffffffefd19856e0>] drv_attr_store+0x30/0x44
[<ffffffefd173c9b0>] sysfs_kf_write+0x50/0x60
[<ffffffefd173c1c4>] kernfs_fop_write_iter+0x124/0x1b4
[<ffffffefd16a013c>] new_sync_write+0xdc/0x160
[<ffffffefd16a256c>] vfs_write+0x23c/0x2a0
[<ffffffefd16a2758>] ksys_write+0x64/0xec
To prevent this we should free the dma_range_map when the device is
released.
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Cc: stable <stable@vger.kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220216094128.4025861-1-marten.lindahl@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/base/dd.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -629,6 +629,9 @@ re_probe:
drv->remove(dev);
devres_release_all(dev);
+ arch_teardown_dma_ops(dev);
+ kfree(dev->dma_range_map);
+ dev->dma_range_map = NULL;
driver_sysfs_remove(dev);
dev->driver = NULL;
dev_set_drvdata(dev, NULL);
@@ -1208,6 +1211,8 @@ static void __device_release_driver(stru
devres_release_all(dev);
arch_teardown_dma_ops(dev);
+ kfree(dev->dma_range_map);
+ dev->dma_range_map = NULL;
dev->driver = NULL;
dev_set_drvdata(dev, NULL);
if (dev->pm_domain && dev->pm_domain->dismiss)
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 120/139] btrfs: prevent copying too big compressed lzo segment
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 119/139] driver core: Free DMA range map when device is released Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 121/139] RDMA/cma: Do not change route.addr.src_addr outside state checks Greg Kroah-Hartman
` (28 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dāvis Mosāns, David Sterba
From: Dāvis Mosāns <davispuh@gmail.com>
commit 741b23a970a79d5d3a1db2d64fa2c7b375a4febb upstream.
Compressed length can be corrupted to be a lot larger than memory
we have allocated for buffer.
This will cause memcpy in copy_compressed_segment to write outside
of allocated memory.
This mostly results in stuck read syscall but sometimes when using
btrfs send can get #GP
kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI
kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12
kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs]
kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs
Code starting with the faulting instruction
===========================================
0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction
3: 48 8d 79 08 lea 0x8(%rcx),%rdi
7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi
b: 48 89 01 mov %rax,(%rcx)
e: 44 89 f0 mov %r14d,%eax
11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx
kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212
kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8
kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d
kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000
kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000
kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0
kernel: Call Trace:
kernel: <TASK>
kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs
kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs
kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs
kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312)
kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455)
kernel: ? process_one_work (kernel/workqueue.c:2397)
kernel: kthread (kernel/kthread.c:377)
kernel: ? kthread_complete_and_exit (kernel/kthread.c:332)
kernel: ret_from_fork (arch/x86/entry/entry_64.S:301)
kernel: </TASK>
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/lzo.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/fs/btrfs/lzo.c
+++ b/fs/btrfs/lzo.c
@@ -363,6 +363,17 @@ int lzo_decompress_bio(struct list_head
kunmap(cur_page);
cur_in += LZO_LEN;
+ if (seg_len > lzo1x_worst_compress(PAGE_SIZE)) {
+ /*
+ * seg_len shouldn't be larger than we have allocated
+ * for workspace->cbuf
+ */
+ btrfs_err(fs_info, "unexpectedly large lzo segment len %u",
+ seg_len);
+ ret = -EIO;
+ goto out;
+ }
+
/* Copy the compressed segment payload into workspace */
copy_compressed_segment(cb, workspace->cbuf, seg_len, &cur_in);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 121/139] RDMA/cma: Do not change route.addr.src_addr outside state checks
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 120/139] btrfs: prevent copying too big compressed lzo segment Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 122/139] thermal: int340x: fix memory leak in int3400_notify() Greg Kroah-Hartman
` (27 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+c94a3675a626f6333d74,
Leon Romanovsky, Jason Gunthorpe
From: Jason Gunthorpe <jgg@nvidia.com>
commit 22e9f71072fa605cbf033158db58e0790101928d upstream.
If the state is not idle then resolve_prepare_src() should immediately
fail and no change to global state should happen. However, it
unconditionally overwrites the src_addr trying to build a temporary any
address.
For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():
if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)
Which would manifest as this trace from syzkaller:
BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204
CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
__list_add_valid+0x93/0xa0 lib/list_debug.c:26
__list_add include/linux/list.h:67 [inline]
list_add_tail include/linux/list.h:100 [inline]
cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
vfs_write+0x28e/0xa30 fs/read_write.c:603
ksys_write+0x1ee/0x250 fs/read_write.c:658
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
This is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().
Instead of trying to re-use the src_addr memory to indirectly create an
any address derived from the dst build one explicitly on the stack and
bind to that as any other normal flow would do. rdma_bind_addr() will copy
it over the src_addr once it knows the state is valid.
This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change
route.addr.src_addr.ss_family")
Link: https://lore.kernel.org/r/0-v2-e975c8fd9ef2+11e-syz_cma_srcaddr_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+c94a3675a626f6333d74@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/core/cma.c | 38 +++++++++++++++++++++++---------------
1 file changed, 23 insertions(+), 15 deletions(-)
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -3368,22 +3368,30 @@ err:
static int cma_bind_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
const struct sockaddr *dst_addr)
{
- if (!src_addr || !src_addr->sa_family) {
- src_addr = (struct sockaddr *) &id->route.addr.src_addr;
- src_addr->sa_family = dst_addr->sa_family;
- if (IS_ENABLED(CONFIG_IPV6) &&
- dst_addr->sa_family == AF_INET6) {
- struct sockaddr_in6 *src_addr6 = (struct sockaddr_in6 *) src_addr;
- struct sockaddr_in6 *dst_addr6 = (struct sockaddr_in6 *) dst_addr;
- src_addr6->sin6_scope_id = dst_addr6->sin6_scope_id;
- if (ipv6_addr_type(&dst_addr6->sin6_addr) & IPV6_ADDR_LINKLOCAL)
- id->route.addr.dev_addr.bound_dev_if = dst_addr6->sin6_scope_id;
- } else if (dst_addr->sa_family == AF_IB) {
- ((struct sockaddr_ib *) src_addr)->sib_pkey =
- ((struct sockaddr_ib *) dst_addr)->sib_pkey;
- }
+ struct sockaddr_storage zero_sock = {};
+
+ if (src_addr && src_addr->sa_family)
+ return rdma_bind_addr(id, src_addr);
+
+ /*
+ * When the src_addr is not specified, automatically supply an any addr
+ */
+ zero_sock.ss_family = dst_addr->sa_family;
+ if (IS_ENABLED(CONFIG_IPV6) && dst_addr->sa_family == AF_INET6) {
+ struct sockaddr_in6 *src_addr6 =
+ (struct sockaddr_in6 *)&zero_sock;
+ struct sockaddr_in6 *dst_addr6 =
+ (struct sockaddr_in6 *)dst_addr;
+
+ src_addr6->sin6_scope_id = dst_addr6->sin6_scope_id;
+ if (ipv6_addr_type(&dst_addr6->sin6_addr) & IPV6_ADDR_LINKLOCAL)
+ id->route.addr.dev_addr.bound_dev_if =
+ dst_addr6->sin6_scope_id;
+ } else if (dst_addr->sa_family == AF_IB) {
+ ((struct sockaddr_ib *)&zero_sock)->sib_pkey =
+ ((struct sockaddr_ib *)dst_addr)->sib_pkey;
}
- return rdma_bind_addr(id, src_addr);
+ return rdma_bind_addr(id, (struct sockaddr *)&zero_sock);
}
/*
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 122/139] thermal: int340x: fix memory leak in int3400_notify()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 121/139] RDMA/cma: Do not change route.addr.src_addr outside state checks Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 123/139] staging: fbtft: fb_st7789v: reset display before initialization Greg Kroah-Hartman
` (26 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chuansheng Liu, Rafael J. Wysocki
From: Chuansheng Liu <chuansheng.liu@intel.com>
commit 3abea10e6a8f0e7804ed4c124bea2d15aca977c8 upstream.
It is easy to hit the below memory leaks in my TigerLake platform:
unreferenced object 0xffff927c8b91dbc0 (size 32):
comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s)
hex dump (first 32 bytes):
4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The
72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk.
backtrace:
[<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0
[<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0
[<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70
[<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal]
[<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71
[<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30
[<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0
[<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0
[<ffffffff9c2cb4dd>] kthread+0xfd/0x130
[<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30
Fix it by calling kfree() accordingly.
Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event")
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -405,6 +405,10 @@ static void int3400_notify(acpi_handle h
thermal_prop[3] = kasprintf(GFP_KERNEL, "EVENT=%d", therm_event);
thermal_prop[4] = NULL;
kobject_uevent_env(&priv->thermal->device.kobj, KOBJ_CHANGE, thermal_prop);
+ kfree(thermal_prop[0]);
+ kfree(thermal_prop[1]);
+ kfree(thermal_prop[2]);
+ kfree(thermal_prop[3]);
}
static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 123/139] staging: fbtft: fb_st7789v: reset display before initialization
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 122/139] thermal: int340x: fix memory leak in int3400_notify() Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 124/139] tps6598x: clear int mask on probe failure Greg Kroah-Hartman
` (25 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Oliver Graute
From: Oliver Graute <oliver.graute@kococonnector.com>
commit b6821b0d9b56386d2bf14806f90ec401468c799f upstream.
In rare cases the display is flipped or mirrored. This was observed more
often in a low temperature environment. A clean reset on init_display()
should help to get registers in a sane state.
Fixes: ef8f317795da (staging: fbtft: use init function instead of init sequence)
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20220210085322.15676-1-oliver.graute@kococonnector.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/fbtft/fb_st7789v.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/staging/fbtft/fb_st7789v.c
+++ b/drivers/staging/fbtft/fb_st7789v.c
@@ -144,6 +144,8 @@ static int init_display(struct fbtft_par
{
int rc;
+ par->fbtftops.reset(par);
+
rc = init_tearing_effect_line(par);
if (rc)
return rc;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 124/139] tps6598x: clear int mask on probe failure
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 123/139] staging: fbtft: fb_st7789v: reset display before initialization Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:24 ` [PATCH 5.15 125/139] IB/qib: Fix duplicate sysfs directory name Greg Kroah-Hartman
` (24 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sven Peter, Heikki Krogerus, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit aba2081e0a9c977396124aa6df93b55ed5912b19 upstream.
The interrupt mask is enabled before any potential failure points in
the driver, which can leave a failure path where we exit with
interrupts enabled but the device not live. This causes an infinite
stream of interrupts on an Apple M1 Pro laptop on USB-C.
Add a failure label that's used post enabling interrupts, where we
mask them again before returning an error.
Suggested-by: Sven Peter <sven@svenpeter.dev>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@kernel.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/typec/tipd/core.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -618,12 +618,12 @@ static int tps6598x_probe(struct i2c_cli
ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
if (ret < 0)
- return ret;
+ goto err_clear_mask;
trace_tps6598x_status(status);
ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf);
if (ret < 0)
- return ret;
+ goto err_clear_mask;
/*
* This fwnode has a "compatible" property, but is never populated as a
@@ -712,7 +712,8 @@ err_role_put:
usb_role_switch_put(tps->role_sw);
err_fwnode_put:
fwnode_handle_put(fwnode);
-
+err_clear_mask:
+ tps6598x_write64(tps, TPS_REG_INT_MASK1, 0);
return ret;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 125/139] IB/qib: Fix duplicate sysfs directory name
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 124/139] tps6598x: clear int mask on probe failure Greg Kroah-Hartman
@ 2022-02-28 17:24 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 126/139] riscv: fix nommu_k210_sdcard_defconfig Greg Kroah-Hartman
` (23 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dennis Dalessandro, Mike Marciniszyn,
Jason Gunthorpe
From: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
commit 32f57cb1b2c8d6f20aefec7052b1bfeb7e3b69d4 upstream.
The qib driver load has been failing with the following message:
sysfs: cannot create duplicate filename '/devices/pci0000:80/0000:80:02.0/0000:81:00.0/infiniband/qib0/ports/1/linkcontrol'
The patch below has two "linkcontrol" names causing the duplication.
Fix by using the correct "diag_counters" name on the second instance.
Fixes: 4a7aaf88c89f ("RDMA/qib: Use attributes for the port sysfs")
Link: https://lore.kernel.org/r/1645106372-23004-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/hw/qib/qib_sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -541,7 +541,7 @@ static struct attribute *port_diagc_attr
};
static const struct attribute_group port_diagc_group = {
- .name = "linkcontrol",
+ .name = "diag_counters",
.attrs = port_diagc_attributes,
};
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 126/139] riscv: fix nommu_k210_sdcard_defconfig
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2022-02-28 17:24 ` [PATCH 5.15 125/139] IB/qib: Fix duplicate sysfs directory name Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 127/139] riscv: fix oops caused by irqsoff latency tracer Greg Kroah-Hartman
` (22 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Damien Le Moal, Anup Patel, Palmer Dabbelt
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
commit 762e52f79c95ea20a7229674ffd13b94d7d8959c upstream.
Instead of an arbitrary delay, use the "rootwait" kernel option to wait
for the mmc root device to be ready.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fixes: 7e09fd3994c5 ("riscv: Add Canaan Kendryte K210 SD card defconfig")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/configs/nommu_k210_sdcard_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/riscv/configs/nommu_k210_sdcard_defconfig
+++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig
@@ -23,7 +23,7 @@ CONFIG_SLOB=y
CONFIG_SOC_CANAAN=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
-CONFIG_CMDLINE="earlycon console=ttySIF0 rootdelay=2 root=/dev/mmcblk0p1 ro"
+CONFIG_CMDLINE="earlycon console=ttySIF0 root=/dev/mmcblk0p1 rootwait ro"
CONFIG_CMDLINE_FORCE=y
# CONFIG_SECCOMP is not set
# CONFIG_STACKPROTECTOR is not set
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 127/139] riscv: fix oops caused by irqsoff latency tracer
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 126/139] riscv: fix nommu_k210_sdcard_defconfig Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 128/139] tty: n_gsm: fix encoding of control signal octet bit DV Greg Kroah-Hartman
` (21 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Changbin Du, Palmer Dabbelt
From: Changbin Du <changbin.du@gmail.com>
commit 22e2100b1b07d6f5acc71cc1acb53f680c677d77 upstream.
The trace_hardirqs_{on,off}() require the caller to setup frame pointer
properly. This because these two functions use macro 'CALLER_ADDR1' (aka.
__builtin_return_address(1)) to acquire caller info. If the $fp is used
for other purpose, the code generated this macro (as below) could trigger
memory access fault.
0xffffffff8011510e <+80>: ld a1,-16(s0)
0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here
The oops message during booting if compiled with 'irqoff' tracer enabled:
[ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8
[ 0.041925][ T0] Oops [#1]
[ 0.042063][ T0] Modules linked in:
[ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29
[ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT)
[ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2
[ 0.044601][ T0] ra : restore_all+0x12/0x6e
[ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0
[ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020
[ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0
[ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100
[ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45
[ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50
[ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8
[ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000
[ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000
[ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368
[ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d
[ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e
This because the $fp(aka. $s0) register is not used as frame pointer in the
assembly entry code.
resume_kernel:
REG_L s0, TASK_TI_PREEMPT_COUNT(tp)
bnez s0, restore_all
REG_L s0, TASK_TI_FLAGS(tp)
andi s0, s0, _TIF_NEED_RESCHED
beqz s0, restore_all
call preempt_schedule_irq
j restore_all
To fix above issue, here we add one extra level wrapper for function
trace_hardirqs_{on,off}() so they can be safely called by low level entry
code.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/riscv/kernel/Makefile | 2 ++
arch/riscv/kernel/entry.S | 10 +++++-----
arch/riscv/kernel/trace_irq.c | 27 +++++++++++++++++++++++++++
arch/riscv/kernel/trace_irq.h | 11 +++++++++++
4 files changed, 45 insertions(+), 5 deletions(-)
create mode 100644 arch/riscv/kernel/trace_irq.c
create mode 100644 arch/riscv/kernel/trace_irq.h
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -50,6 +50,8 @@ obj-$(CONFIG_MODULE_SECTIONS) += module-
obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o
obj-$(CONFIG_DYNAMIC_FTRACE) += mcount-dyn.o
+obj-$(CONFIG_TRACE_IRQFLAGS) += trace_irq.o
+
obj-$(CONFIG_RISCV_BASE_PMU) += perf_event.o
obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o
obj-$(CONFIG_HAVE_PERF_REGS) += perf_regs.o
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -108,7 +108,7 @@ _save_context:
.option pop
#ifdef CONFIG_TRACE_IRQFLAGS
- call trace_hardirqs_off
+ call __trace_hardirqs_off
#endif
#ifdef CONFIG_CONTEXT_TRACKING
@@ -144,7 +144,7 @@ skip_context_tracking:
li t0, EXC_BREAKPOINT
beq s4, t0, 1f
#ifdef CONFIG_TRACE_IRQFLAGS
- call trace_hardirqs_on
+ call __trace_hardirqs_on
#endif
csrs CSR_STATUS, SR_IE
@@ -235,7 +235,7 @@ ret_from_exception:
REG_L s0, PT_STATUS(sp)
csrc CSR_STATUS, SR_IE
#ifdef CONFIG_TRACE_IRQFLAGS
- call trace_hardirqs_off
+ call __trace_hardirqs_off
#endif
#ifdef CONFIG_RISCV_M_MODE
/* the MPP value is too large to be used as an immediate arg for addi */
@@ -271,10 +271,10 @@ restore_all:
REG_L s1, PT_STATUS(sp)
andi t0, s1, SR_PIE
beqz t0, 1f
- call trace_hardirqs_on
+ call __trace_hardirqs_on
j 2f
1:
- call trace_hardirqs_off
+ call __trace_hardirqs_off
2:
#endif
REG_L a0, PT_STATUS(sp)
--- /dev/null
+++ b/arch/riscv/kernel/trace_irq.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Changbin Du <changbin.du@gmail.com>
+ */
+
+#include <linux/irqflags.h>
+#include <linux/kprobes.h>
+#include "trace_irq.h"
+
+/*
+ * trace_hardirqs_on/off require the caller to setup frame pointer properly.
+ * Otherwise, CALLER_ADDR1 might trigger an pagging exception in kernel.
+ * Here we add one extra level so they can be safely called by low
+ * level entry code which $fp is used for other purpose.
+ */
+
+void __trace_hardirqs_on(void)
+{
+ trace_hardirqs_on();
+}
+NOKPROBE_SYMBOL(__trace_hardirqs_on);
+
+void __trace_hardirqs_off(void)
+{
+ trace_hardirqs_off();
+}
+NOKPROBE_SYMBOL(__trace_hardirqs_off);
--- /dev/null
+++ b/arch/riscv/kernel/trace_irq.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 Changbin Du <changbin.du@gmail.com>
+ */
+#ifndef __TRACE_IRQ_H
+#define __TRACE_IRQ_H
+
+void __trace_hardirqs_on(void);
+void __trace_hardirqs_off(void);
+
+#endif /* __TRACE_IRQ_H */
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 128/139] tty: n_gsm: fix encoding of control signal octet bit DV
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 127/139] riscv: fix oops caused by irqsoff latency tracer Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 129/139] tty: n_gsm: fix proper link termination after failed open Greg Kroah-Hartman
` (20 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit 737b0ef3be6b319d6c1fd64193d1603311969326 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the
control signal octet used by the MSC (modem status command). The same
encoding is also used in convergence layer type 2 as described in chapter
5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for
outgoing control signal octets sent by the DTE (data terminal equipment),
i.e. for the initiator side.
Currently, the DV bit is only set if CD (carrier detect) is on, regardless
of the side.
This patch fixes this behavior by setting the DV bit on the initiator side
unconditionally.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -435,7 +435,7 @@ static u8 gsm_encode_modem(const struct
modembits |= MDM_RTR;
if (dlci->modem_tx & TIOCM_RI)
modembits |= MDM_IC;
- if (dlci->modem_tx & TIOCM_CD)
+ if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
modembits |= MDM_DV;
return modembits;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 129/139] tty: n_gsm: fix proper link termination after failed open
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 128/139] tty: n_gsm: fix encoding of control signal octet bit DV Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 130/139] tty: n_gsm: fix NULL pointer access due to DLCI release Greg Kroah-Hartman
` (19 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit e3b7468f082d106459e86e8dc6fb9bdd65553433 upstream.
Trying to open a DLCI by sending a SABM frame may fail with a timeout.
The link is closed on the initiator side without informing the responder
about this event. The responder assumes the link is open after sending a
UA frame to answer the SABM frame. The link gets stuck in a half open
state.
This patch fixes this by initiating the proper link termination procedure
after link setup timeout instead of silently closing it down.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1488,7 +1488,7 @@ static void gsm_dlci_t1(struct timer_lis
dlci->mode = DLCI_MODE_ADM;
gsm_dlci_open(dlci);
} else {
- gsm_dlci_close(dlci);
+ gsm_dlci_begin_close(dlci); /* prevent half open link */
}
break;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 130/139] tty: n_gsm: fix NULL pointer access due to DLCI release
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 129/139] tty: n_gsm: fix proper link termination after failed open Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 131/139] tty: n_gsm: fix wrong tty control line for flow control Greg Kroah-Hartman
` (18 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit 96b169f05cdcc844b400695184d77e42071d14f2 upstream.
The here fixed commit made the tty hangup asynchronous to avoid a circular
locking warning. I could not reproduce this warning. Furthermore, due to
the asynchronous hangup the function call now gets queued up while the
underlying tty is being freed. Depending on the timing this results in a
NULL pointer access in the global work queue scheduler. To be precise in
process_one_work(). Therefore, the previous commit made the issue worse
which it tried to fix.
This patch fixes this by falling back to the old behavior which uses a
blocking tty hangup call before freeing up the associated tty.
Fixes: 7030082a7415 ("tty: n_gsm: avoid recursive locking with async port hangup")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1722,7 +1722,12 @@ static void gsm_dlci_release(struct gsm_
gsm_destroy_network(dlci);
mutex_unlock(&dlci->mutex);
- tty_hangup(tty);
+ /* We cannot use tty_hangup() because in tty_kref_put() the tty
+ * driver assumes that the hangup queue is free and reuses it to
+ * queue release_one_tty() -> NULL pointer panic in
+ * process_one_work().
+ */
+ tty_vhangup(tty);
tty_port_tty_set(&dlci->port, NULL);
tty_kref_put(tty);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 131/139] tty: n_gsm: fix wrong tty control line for flow control
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (129 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 130/139] tty: n_gsm: fix NULL pointer access due to DLCI release Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 132/139] tty: n_gsm: fix wrong modem processing in convergence layer type 2 Greg Kroah-Hartman
` (17 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit c19d93542a6081577e6da9bf5e887979c72e80c1 upstream.
tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle().
Both functions propagate the outgoing hardware flow control state to the
remote side via MSC (modem status command) frames. The local state is taken
from the RTS (ready to send) flag of the tty. However, RTS gets mapped to
DTR (data terminal ready), which is wrong.
This patch corrects this by mapping RTS to RTS.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -3180,9 +3180,9 @@ static void gsmtty_throttle(struct tty_s
if (dlci->state == DLCI_CLOSED)
return;
if (C_CRTSCTS(tty))
- dlci->modem_tx &= ~TIOCM_DTR;
+ dlci->modem_tx &= ~TIOCM_RTS;
dlci->throttled = true;
- /* Send an MSC with DTR cleared */
+ /* Send an MSC with RTS cleared */
gsmtty_modem_update(dlci, 0);
}
@@ -3192,9 +3192,9 @@ static void gsmtty_unthrottle(struct tty
if (dlci->state == DLCI_CLOSED)
return;
if (C_CRTSCTS(tty))
- dlci->modem_tx |= TIOCM_DTR;
+ dlci->modem_tx |= TIOCM_RTS;
dlci->throttled = false;
- /* Send an MSC with DTR set */
+ /* Send an MSC with RTS set */
gsmtty_modem_update(dlci, 0);
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 132/139] tty: n_gsm: fix wrong modem processing in convergence layer type 2
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (130 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 131/139] tty: n_gsm: fix wrong tty control line for flow control Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 133/139] tty: n_gsm: fix deadlock in gsmtty_open() Greg Kroah-Hartman
` (16 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit 687f9ad43c52501f46164758e908a5dd181a87fc upstream.
The function gsm_process_modem() exists to handle modem status bits of
incoming frames. This includes incoming MSC (modem status command) frames
and convergence layer type 2 data frames. The function, however, was only
designed to handle MSC frames as it expects the command length. Within
gsm_dlci_data() it is wrongly assumed that this is the same as the data
frame length. This is only true if the data frame contains only 1 byte of
payload.
This patch names the length parameter of gsm_process_modem() in a generic
manner to reflect its association. It also corrects all calls to the
function to handle the variable number of modem status octets correctly in
both cases.
Fixes: 7263287af93d ("tty: n_gsm: Fixed logic to decode break signal from modem status")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-6-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1009,25 +1009,25 @@ static void gsm_control_reply(struct gsm
* @tty: virtual tty bound to the DLCI
* @dlci: DLCI to affect
* @modem: modem bits (full EA)
- * @clen: command length
+ * @slen: number of signal octets
*
* Used when a modem control message or line state inline in adaption
* layer 2 is processed. Sort out the local modem state and throttles
*/
static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
- u32 modem, int clen)
+ u32 modem, int slen)
{
int mlines = 0;
u8 brk = 0;
int fc;
- /* The modem status command can either contain one octet (v.24 signals)
- or two octets (v.24 signals + break signals). The length field will
- either be 2 or 3 respectively. This is specified in section
- 5.4.6.3.7 of the 27.010 mux spec. */
+ /* The modem status command can either contain one octet (V.24 signals)
+ * or two octets (V.24 signals + break signals). This is specified in
+ * section 5.4.6.3.7 of the 07.10 mux spec.
+ */
- if (clen == 2)
+ if (slen == 1)
modem = modem & 0x7f;
else {
brk = modem & 0x7f;
@@ -1084,6 +1084,7 @@ static void gsm_control_modem(struct gsm
unsigned int brk = 0;
struct gsm_dlci *dlci;
int len = clen;
+ int slen;
const u8 *dp = data;
struct tty_struct *tty;
@@ -1103,6 +1104,7 @@ static void gsm_control_modem(struct gsm
return;
dlci = gsm->dlci[addr];
+ slen = len;
while (gsm_read_ea(&modem, *dp++) == 0) {
len--;
if (len == 0)
@@ -1119,7 +1121,7 @@ static void gsm_control_modem(struct gsm
modem |= (brk & 0x7f);
}
tty = tty_port_tty_get(&dlci->port);
- gsm_process_modem(tty, dlci, modem, clen);
+ gsm_process_modem(tty, dlci, modem, slen);
if (tty) {
tty_wakeup(tty);
tty_kref_put(tty);
@@ -1567,6 +1569,7 @@ static void gsm_dlci_data(struct gsm_dlc
struct tty_struct *tty;
unsigned int modem = 0;
int len = clen;
+ int slen = 0;
if (debug & 16)
pr_debug("%d bytes for tty\n", len);
@@ -1579,12 +1582,14 @@ static void gsm_dlci_data(struct gsm_dlc
case 2: /* Asynchronous serial with line state in each frame */
while (gsm_read_ea(&modem, *data++) == 0) {
len--;
+ slen++;
if (len == 0)
return;
}
+ slen++;
tty = tty_port_tty_get(port);
if (tty) {
- gsm_process_modem(tty, dlci, modem, clen);
+ gsm_process_modem(tty, dlci, modem, slen);
tty_kref_put(tty);
}
fallthrough;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 133/139] tty: n_gsm: fix deadlock in gsmtty_open()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (131 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 132/139] tty: n_gsm: fix wrong modem processing in convergence layer type 2 Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 134/139] pinctrl: fix loop in k210_pinconf_get_drive() Greg Kroah-Hartman
` (15 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: daniel.starke@siemens.com <daniel.starke@siemens.com>
commit a2ab75b8e76e455af7867e3835fd9cdf386b508f upstream.
In the current implementation the user may open a virtual tty which then
could fail to establish the underlying DLCI. The function gsmtty_open()
gets stuck in tty_port_block_til_ready() while waiting for a carrier rise.
This happens if the remote side fails to acknowledge the link establishment
request in time or completely. At some point gsm_dlci_close() is called
to abort the link establishment attempt. The function tries to inform the
associated virtual tty by performing a hangup. But the blocking loop within
tty_port_block_til_ready() is not informed about this event.
The patch proposed here fixes this by resetting the initialization state of
the virtual tty to ensure the loop exits and triggering it to make
tty_port_block_til_ready() return.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1431,6 +1431,9 @@ static void gsm_dlci_close(struct gsm_dl
if (dlci->addr != 0) {
tty_port_tty_hangup(&dlci->port, false);
kfifo_reset(&dlci->fifo);
+ /* Ensure that gsmtty_open() can return. */
+ tty_port_set_initialized(&dlci->port, 0);
+ wake_up_interruptible(&dlci->port.open_wait);
} else
dlci->gsm->dead = true;
wake_up(&dlci->gsm->event);
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 134/139] pinctrl: fix loop in k210_pinconf_get_drive()
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (132 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 133/139] tty: n_gsm: fix deadlock in gsmtty_open() Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 135/139] pinctrl: k210: Fix bias-pull-up Greg Kroah-Hartman
` (14 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Damien Le Moal,
Sean Anderson, Linus Walleij
From: Dan Carpenter <dan.carpenter@oracle.com>
commit ba2ab85951c91a140a8fa51d8347d54e59ec009d upstream.
The loop exited too early so the k210_pinconf_drive_strength[0] array
element was never used.
Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20220209180804.GA18385@kili
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pinctrl/pinctrl-k210.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-k210.c
+++ b/drivers/pinctrl/pinctrl-k210.c
@@ -482,7 +482,7 @@ static int k210_pinconf_get_drive(unsign
{
int i;
- for (i = K210_PC_DRIVE_MAX; i; i--) {
+ for (i = K210_PC_DRIVE_MAX; i >= 0; i--) {
if (k210_pinconf_drive_strength[i] <= max_strength_ua)
return i;
}
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 135/139] pinctrl: k210: Fix bias-pull-up
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (133 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 134/139] pinctrl: fix loop in k210_pinconf_get_drive() Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 136/139] gpio: tegra186: Fix chip_data type confusion Greg Kroah-Hartman
` (13 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Anderson, Damien Le Moal, Linus Walleij
From: Sean Anderson <seanga2@gmail.com>
commit e9f7b9228a94778edb7a63fde3c0a3c5bb793064 upstream.
Using bias-pull-up would actually cause the pin to have its pull-down
enabled. Fix this.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver")
Link: https://lore.kernel.org/r/20220209182822.640905-1-seanga2@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pinctrl/pinctrl-k210.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-k210.c
+++ b/drivers/pinctrl/pinctrl-k210.c
@@ -527,7 +527,7 @@ static int k210_pinconf_set_param(struct
case PIN_CONFIG_BIAS_PULL_UP:
if (!arg)
return -EINVAL;
- val |= K210_PC_PD;
+ val |= K210_PC_PU;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg *= 1000;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 136/139] gpio: tegra186: Fix chip_data type confusion
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (134 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 135/139] pinctrl: k210: Fix bias-pull-up Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 137/139] memblock: use kfree() to release kmalloced memblock regions Greg Kroah-Hartman
` (12 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marc Zyngier, Thierry Reding,
Linus Walleij, Bartosz Golaszewski
From: Marc Zyngier <maz@kernel.org>
commit d1e972ace42390de739cde87d96043dcbe502286 upstream.
The tegra186 GPIO driver makes the assumption that the pointer
returned by irq_data_get_irq_chip_data() is a pointer to a
tegra_gpio structure. Unfortunately, it is actually a pointer
to the inner gpio_chip structure, as mandated by the gpiolib
infrastructure. Nice try.
The saving grace is that the gpio_chip is the first member of
tegra_gpio, so the bug has gone undetected since... forever.
Fix it by performing a container_of() on the pointer. This results
in no additional code, and makes it possible to understand how
the whole thing works.
Fixes: 5b2b135a87fc ("gpio: Add Tegra186 support")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20220211093904.1112679-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpio/gpio-tegra186.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -337,9 +337,12 @@ static int tegra186_gpio_of_xlate(struct
return offset + pin;
}
+#define to_tegra_gpio(x) container_of((x), struct tegra_gpio, gpio)
+
static void tegra186_irq_ack(struct irq_data *data)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
base = tegra186_gpio_get_base(gpio, data->hwirq);
@@ -351,7 +354,8 @@ static void tegra186_irq_ack(struct irq_
static void tegra186_irq_mask(struct irq_data *data)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
u32 value;
@@ -366,7 +370,8 @@ static void tegra186_irq_mask(struct irq
static void tegra186_irq_unmask(struct irq_data *data)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
u32 value;
@@ -381,7 +386,8 @@ static void tegra186_irq_unmask(struct i
static int tegra186_irq_set_type(struct irq_data *data, unsigned int type)
{
- struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct tegra_gpio *gpio = to_tegra_gpio(gc);
void __iomem *base;
u32 value;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 137/139] memblock: use kfree() to release kmalloced memblock regions
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (135 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 136/139] gpio: tegra186: Fix chip_data type confusion Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 138/139] ice: Fix race conditions between virtchnl handling and VF ndo ops Greg Kroah-Hartman
` (11 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Miaohe Lin, Mike Rapoport
From: Miaohe Lin <linmiaohe@huawei.com>
commit c94afc46cae7ad41b2ad6a99368147879f4b0e56 upstream.
memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions
indicated by memblock_{reserved,memory}_in_slab.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Fixes: 3010f876500f ("mm: discard memblock data later")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memblock.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -366,14 +366,20 @@ void __init memblock_discard(void)
addr = __pa(memblock.reserved.regions);
size = PAGE_ALIGN(sizeof(struct memblock_region) *
memblock.reserved.max);
- __memblock_free_late(addr, size);
+ if (memblock_reserved_in_slab)
+ kfree(memblock.reserved.regions);
+ else
+ __memblock_free_late(addr, size);
}
if (memblock.memory.regions != memblock_memory_init_regions) {
addr = __pa(memblock.memory.regions);
size = PAGE_ALIGN(sizeof(struct memblock_region) *
memblock.memory.max);
- __memblock_free_late(addr, size);
+ if (memblock_memory_in_slab)
+ kfree(memblock.memory.regions);
+ else
+ __memblock_free_late(addr, size);
}
memblock_memory = NULL;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 138/139] ice: Fix race conditions between virtchnl handling and VF ndo ops
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (136 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 137/139] memblock: use kfree() to release kmalloced memblock regions Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 17:25 ` [PATCH 5.15 139/139] ice: fix concurrent reset and removal of VFs Greg Kroah-Hartman
` (10 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Brett Creeley, Konrad Jankowski, Tony Nguyen,
Jacob Keller
From: Brett Creeley <brett.creeley@intel.com>
commit e6ba5273d4ede03d075d7a116b8edad1f6115f4d upstream.
The VF can be configured via the PF's ndo ops at the same time the PF is
receiving/handling virtchnl messages. This has many issues, with
one of them being the ndo op could be actively resetting a VF (i.e.
resetting it to the default state and deleting/re-adding the VF's VSI)
while a virtchnl message is being handled. The following error was seen
because a VF ndo op was used to change a VF's trust setting while the
VIRTCHNL_OP_CONFIG_VSI_QUEUES was ongoing:
[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6
Fix this by making sure the virtchnl handling and VF ndo ops that
trigger VF resets cannot run concurrently. This is done by adding a
struct mutex cfg_lock to each VF structure. For VF ndo ops, the mutex
will be locked around the critical operations and VFR. Since the ndo ops
will trigger a VFR, the virtchnl thread will use mutex_trylock(). This
is done because if any other thread (i.e. VF ndo op) has the mutex, then
that means the current VF message being handled is no longer valid, so
just ignore it.
This issue can be seen using the following commands:
for i in {0..50}; do
rmmod ice
modprobe ice
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
sleep 2
echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
done
Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[I had to fix the cherry-pick manually as the patch added a line around
some context that was missing.]
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 25 +++++++++++++++++++++++
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h | 5 ++++
2 files changed, 30 insertions(+)
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -646,6 +646,8 @@ void ice_free_vfs(struct ice_pf *pf)
set_bit(ICE_VF_STATE_DIS, pf->vf[i].vf_states);
ice_free_vf_res(&pf->vf[i]);
}
+
+ mutex_destroy(&pf->vf[i].cfg_lock);
}
if (ice_sriov_free_msix_res(pf))
@@ -1894,6 +1896,8 @@ static void ice_set_dflt_settings_vfs(st
*/
ice_vf_ctrl_invalidate_vsi(vf);
ice_vf_fdir_init(vf);
+
+ mutex_init(&vf->cfg_lock);
}
}
@@ -4082,6 +4086,8 @@ ice_set_vf_port_vlan(struct net_device *
return 0;
}
+ mutex_lock(&vf->cfg_lock);
+
vf->port_vlan_info = vlanprio;
if (vf->port_vlan_info)
@@ -4091,6 +4097,7 @@ ice_set_vf_port_vlan(struct net_device *
dev_info(dev, "Clearing port VLAN on VF %d\n", vf_id);
ice_vc_reset_vf(vf);
+ mutex_unlock(&vf->cfg_lock);
return 0;
}
@@ -4465,6 +4472,15 @@ error_handler:
return;
}
+ /* VF is being configured in another context that triggers a VFR, so no
+ * need to process this message
+ */
+ if (!mutex_trylock(&vf->cfg_lock)) {
+ dev_info(dev, "VF %u is being configured in another context that will trigger a VFR, so there is no need to handle this message\n",
+ vf->vf_id);
+ return;
+ }
+
switch (v_opcode) {
case VIRTCHNL_OP_VERSION:
err = ice_vc_get_ver_msg(vf, msg);
@@ -4553,6 +4569,8 @@ error_handler:
dev_info(dev, "PF failed to honor VF %d, opcode %d, error %d\n",
vf_id, v_opcode, err);
}
+
+ mutex_unlock(&vf->cfg_lock);
}
/**
@@ -4668,6 +4686,8 @@ int ice_set_vf_mac(struct net_device *ne
return -EINVAL;
}
+ mutex_lock(&vf->cfg_lock);
+
/* VF is notified of its new MAC via the PF's response to the
* VIRTCHNL_OP_GET_VF_RESOURCES message after the VF has been reset
*/
@@ -4686,6 +4706,7 @@ int ice_set_vf_mac(struct net_device *ne
}
ice_vc_reset_vf(vf);
+ mutex_unlock(&vf->cfg_lock);
return 0;
}
@@ -4715,11 +4736,15 @@ int ice_set_vf_trust(struct net_device *
if (trusted == vf->trusted)
return 0;
+ mutex_lock(&vf->cfg_lock);
+
vf->trusted = trusted;
ice_vc_reset_vf(vf);
dev_info(ice_pf_to_dev(pf), "VF %u is now %strusted\n",
vf_id, trusted ? "" : "un");
+ mutex_unlock(&vf->cfg_lock);
+
return 0;
}
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
@@ -74,6 +74,11 @@ struct ice_mdd_vf_events {
struct ice_vf {
struct ice_pf *pf;
+ /* Used during virtchnl message handling and NDO ops against the VF
+ * that will trigger a VFR
+ */
+ struct mutex cfg_lock;
+
u16 vf_id; /* VF ID in the PF space */
u16 lan_vsi_idx; /* index into PF struct */
u16 ctrl_vsi_idx;
^ permalink raw reply [flat|nested] 151+ messages in thread* [PATCH 5.15 139/139] ice: fix concurrent reset and removal of VFs
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (137 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 138/139] ice: Fix race conditions between virtchnl handling and VF ndo ops Greg Kroah-Hartman
@ 2022-02-28 17:25 ` Greg Kroah-Hartman
2022-02-28 21:38 ` [PATCH 5.15 000/139] 5.15.26-rc1 review Shuah Khan
` (9 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Greg Kroah-Hartman @ 2022-02-28 17:25 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Jacob Keller, Konrad Jankowski, Tony Nguyen
From: Jacob Keller <jacob.e.keller@intel.com>
commit fadead80fe4c033b5e514fcbadd20b55c4494112 upstream.
Commit c503e63200c6 ("ice: Stop processing VF messages during teardown")
introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is
intended to prevent some issues with concurrently handling messages from
VFs while tearing down the VFs.
This change was motivated by crashes caused while tearing down and
bringing up VFs in rapid succession.
It turns out that the fix actually introduces issues with the VF driver
caused because the PF no longer responds to any messages sent by the VF
during its .remove routine. This results in the VF potentially removing
its DMA memory before the PF has shut down the device queues.
Additionally, the fix doesn't actually resolve concurrency issues within
the ice driver. It is possible for a VF to initiate a reset just prior
to the ice driver removing VFs. This can result in the remove task
concurrently operating while the VF is being reset. This results in
similar memory corruption and panics purportedly fixed by that commit.
Fix this concurrency at its root by protecting both the reset and
removal flows using the existing VF cfg_lock. This ensures that we
cannot remove the VF while any outstanding critical tasks such as a
virtchnl message or a reset are occurring.
This locking change also fixes the root cause originally fixed by commit
c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we
can simply revert it.
Note that I kept these two changes together because simply reverting the
original commit alone would leave the driver vulnerable to worse race
conditions.
Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown")
Cc: <stable@vger.kernel.org> # e6ba5273d4ed: ice: Fix race conditions between virtchnl handling and VF ndo ops
Cc: <stable@vger.kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/ice/ice.h | 1
drivers/net/ethernet/intel/ice/ice_main.c | 2 +
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 42 +++++++++++++----------
3 files changed, 27 insertions(+), 18 deletions(-)
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -231,7 +231,6 @@ enum ice_pf_state {
ICE_VFLR_EVENT_PENDING,
ICE_FLTR_OVERFLOW_PROMISC,
ICE_VF_DIS,
- ICE_VF_DEINIT_IN_PROGRESS,
ICE_CFG_BUSY,
ICE_SERVICE_SCHED,
ICE_SERVICE_DIS,
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1679,7 +1679,9 @@ static void ice_handle_mdd_event(struct
* reset, so print the event prior to reset.
*/
ice_print_vf_rx_mdd_event(vf);
+ mutex_lock(&pf->vf[i].cfg_lock);
ice_reset_vf(&pf->vf[i], false);
+ mutex_unlock(&pf->vf[i].cfg_lock);
}
}
}
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -615,8 +615,6 @@ void ice_free_vfs(struct ice_pf *pf)
struct ice_hw *hw = &pf->hw;
unsigned int tmp, i;
- set_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state);
-
if (!pf->vf)
return;
@@ -632,22 +630,26 @@ void ice_free_vfs(struct ice_pf *pf)
else
dev_warn(dev, "VFs are assigned - not disabling SR-IOV\n");
- /* Avoid wait time by stopping all VFs at the same time */
- ice_for_each_vf(pf, i)
- ice_dis_vf_qs(&pf->vf[i]);
-
tmp = pf->num_alloc_vfs;
pf->num_qps_per_vf = 0;
pf->num_alloc_vfs = 0;
for (i = 0; i < tmp; i++) {
- if (test_bit(ICE_VF_STATE_INIT, pf->vf[i].vf_states)) {
+ struct ice_vf *vf = &pf->vf[i];
+
+ mutex_lock(&vf->cfg_lock);
+
+ ice_dis_vf_qs(vf);
+
+ if (test_bit(ICE_VF_STATE_INIT, vf->vf_states)) {
/* disable VF qp mappings and set VF disable state */
- ice_dis_vf_mappings(&pf->vf[i]);
- set_bit(ICE_VF_STATE_DIS, pf->vf[i].vf_states);
- ice_free_vf_res(&pf->vf[i]);
+ ice_dis_vf_mappings(vf);
+ set_bit(ICE_VF_STATE_DIS, vf->vf_states);
+ ice_free_vf_res(vf);
}
- mutex_destroy(&pf->vf[i].cfg_lock);
+ mutex_unlock(&vf->cfg_lock);
+
+ mutex_destroy(&vf->cfg_lock);
}
if (ice_sriov_free_msix_res(pf))
@@ -683,7 +685,6 @@ void ice_free_vfs(struct ice_pf *pf)
i);
clear_bit(ICE_VF_DIS, pf->state);
- clear_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state);
clear_bit(ICE_FLAG_SRIOV_ENA, pf->flags);
}
@@ -1567,6 +1568,8 @@ bool ice_reset_all_vfs(struct ice_pf *pf
ice_for_each_vf(pf, v) {
vf = &pf->vf[v];
+ mutex_lock(&vf->cfg_lock);
+
vf->driver_caps = 0;
ice_vc_set_default_allowlist(vf);
@@ -1581,6 +1584,8 @@ bool ice_reset_all_vfs(struct ice_pf *pf
ice_vf_pre_vsi_rebuild(vf);
ice_vf_rebuild_vsi(vf);
ice_vf_post_vsi_rebuild(vf);
+
+ mutex_unlock(&vf->cfg_lock);
}
ice_flush(hw);
@@ -1627,6 +1632,8 @@ bool ice_reset_vf(struct ice_vf *vf, boo
u32 reg;
int i;
+ lockdep_assert_held(&vf->cfg_lock);
+
dev = ice_pf_to_dev(pf);
if (test_bit(ICE_VF_RESETS_DISABLED, pf->state)) {
@@ -2113,9 +2120,12 @@ void ice_process_vflr_event(struct ice_p
bit_idx = (hw->func_caps.vf_base_id + vf_id) % 32;
/* read GLGEN_VFLRSTAT register to find out the flr VFs */
reg = rd32(hw, GLGEN_VFLRSTAT(reg_idx));
- if (reg & BIT(bit_idx))
+ if (reg & BIT(bit_idx)) {
/* GLGEN_VFLRSTAT bit will be cleared in ice_reset_vf */
+ mutex_lock(&vf->cfg_lock);
ice_reset_vf(vf, true);
+ mutex_unlock(&vf->cfg_lock);
+ }
}
}
@@ -2192,7 +2202,9 @@ ice_vf_lan_overflow_event(struct ice_pf
if (!vf)
return;
+ mutex_lock(&vf->cfg_lock);
ice_vc_reset_vf(vf);
+ mutex_unlock(&vf->cfg_lock);
}
/**
@@ -4429,10 +4441,6 @@ void ice_vc_process_vf_msg(struct ice_pf
struct device *dev;
int err = 0;
- /* if de-init is underway, don't process messages from VF */
- if (test_bit(ICE_VF_DEINIT_IN_PROGRESS, pf->state))
- return;
-
dev = ice_pf_to_dev(pf);
if (ice_validate_vf_id(pf, vf_id)) {
err = -EINVAL;
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (138 preceding siblings ...)
2022-02-28 17:25 ` [PATCH 5.15 139/139] ice: fix concurrent reset and removal of VFs Greg Kroah-Hartman
@ 2022-02-28 21:38 ` Shuah Khan
2022-03-01 3:17 ` Florian Fainelli
` (8 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Shuah Khan @ 2022-02-28 21:38 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade,
Shuah Khan
On 2/28/22 10:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.26-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (139 preceding siblings ...)
2022-02-28 21:38 ` [PATCH 5.15 000/139] 5.15.26-rc1 review Shuah Khan
@ 2022-03-01 3:17 ` Florian Fainelli
2022-03-01 7:38 ` Ron Economos
` (7 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Florian Fainelli @ 2022-03-01 3:17 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, sudipm.mukherjee, slade
On 2/28/2022 9:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.26-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTb using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (140 preceding siblings ...)
2022-03-01 3:17 ` Florian Fainelli
@ 2022-03-01 7:38 ` Ron Economos
2022-03-01 7:44 ` Naresh Kamboju
` (6 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Ron Economos @ 2022-03-01 7:38 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade
On 2/28/22 9:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.26-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <re@w6rz.net>
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (141 preceding siblings ...)
2022-03-01 7:38 ` Ron Economos
@ 2022-03-01 7:44 ` Naresh Kamboju
2022-03-01 9:13 ` Jon Hunter
` (5 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Naresh Kamboju @ 2022-03-01 7:44 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Mon, 28 Feb 2022 at 23:06, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.26-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 5.15.26-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: 798174743716117a3388365925d6d20985bf920d
* git describe: v5.15.25-140-g798174743716
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.25-140-g798174743716
## Test Regressions (compared to v5.15.25)
No test regressions found.
## Metric Regressions (compared to v5.15.25)
No metric regressions found.
## Test Fixes (compared to v5.15.25)
No test fixes found.
## Metric Fixes (compared to v5.15.25)
No metric fixes found.
## Test result summary
total: 108667, pass: 93375, fail: 831, skip: 13467, xfail: 994
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 296 total, 293 passed, 3 failed
* arm64: 47 total, 44 passed, 3 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 45 total, 41 passed, 4 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 41 total, 38 passed, 3 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 65 total, 50 passed, 15 failed
* riscv: 32 total, 27 passed, 5 failed
* s390: 26 total, 23 passed, 3 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 47 total, 47 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* prep-inline
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (142 preceding siblings ...)
2022-03-01 7:44 ` Naresh Kamboju
@ 2022-03-01 9:13 ` Jon Hunter
2022-03-01 9:39 ` Bagas Sanjaya
` (4 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Jon Hunter @ 2022-03-01 9:13 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, stable, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, slade, linux-tegra
On Mon, 28 Feb 2022 18:22:54 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.26-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.15:
10 builds: 10 pass, 0 fail
28 boots: 28 pass, 0 fail
114 tests: 114 pass, 0 fail
Linux version: 5.15.26-rc1-g798174743716
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (143 preceding siblings ...)
2022-03-01 9:13 ` Jon Hunter
@ 2022-03-01 9:39 ` Bagas Sanjaya
2022-03-01 11:38 ` Sudip Mukherjee
` (3 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Bagas Sanjaya @ 2022-03-01 9:39 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade
On 01/03/22 00.22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0)
and powerpc (ps3_defconfig, gcc 11.2.0).
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
--
An old man doll... just what I always wanted! - Clara
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (144 preceding siblings ...)
2022-03-01 9:39 ` Bagas Sanjaya
@ 2022-03-01 11:38 ` Sudip Mukherjee
2022-03-01 17:52 ` Allen Pais
` (2 subsequent siblings)
148 siblings, 0 replies; 151+ messages in thread
From: Sudip Mukherjee @ 2022-03-01 11:38 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, slade
Hi Greg,
On Mon, Feb 28, 2022 at 06:22:54PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20220213): 62 configs -> no failure
arm (gcc version 11.2.1 20220213): 100 configs -> no new failure
arm64 (gcc version 11.2.1 20220213): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220213): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]
[1]. https://openqa.qa.codethink.co.uk/tests/822
[2]. https://openqa.qa.codethink.co.uk/tests/825
[3]. https://openqa.qa.codethink.co.uk/tests/829
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
--
Regards
Sudip
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (145 preceding siblings ...)
2022-03-01 11:38 ` Sudip Mukherjee
@ 2022-03-01 17:52 ` Allen Pais
2022-03-01 19:14 ` Guenter Roeck
2022-03-02 7:04 ` Slade Watkins
148 siblings, 0 replies; 151+ messages in thread
From: Allen Pais @ 2022-03-01 17:52 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
>
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Compiled and booted on my test(x86/arm64) systems. No regressions.
Tested-by: Allen Pais <apais@linux.microsoft.com>
Thanks.
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (146 preceding siblings ...)
2022-03-01 17:52 ` Allen Pais
@ 2022-03-01 19:14 ` Guenter Roeck
2022-03-02 7:04 ` Slade Watkins
148 siblings, 0 replies; 151+ messages in thread
From: Guenter Roeck @ 2022-03-01 19:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Mon, Feb 28, 2022 at 06:22:54PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 488 pass: 488 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 151+ messages in thread* Re: [PATCH 5.15 000/139] 5.15.26-rc1 review
2022-02-28 17:22 [PATCH 5.15 000/139] 5.15.26-rc1 review Greg Kroah-Hartman
` (147 preceding siblings ...)
2022-03-01 19:14 ` Guenter Roeck
@ 2022-03-02 7:04 ` Slade Watkins
148 siblings, 0 replies; 151+ messages in thread
From: Slade Watkins @ 2022-03-02 7:04 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, Linus Torvalds, Andrew Morton, Guenter Roeck, shuah,
patches, lkft-triage, Pavel Machek, Jon Hunter, Florian Fainelli,
Sudip Mukherjee
On Mon, Feb 28, 2022, at 12:22 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.26 release.
> There are 139 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Mar 2022 17:20:16 +0000.
> Anything received after that time might be too late.
5.15.26-rc1 compiled and booted with no errors or regressions on my x86_64 test system.
Tested-by: Slade Watkins <slade@sladewatkins.com>
Cheers,
Slade
^ permalink raw reply [flat|nested] 151+ messages in thread