* [PATCH 0/5] lpfc: fixes for EH rework
@ 2022-03-01 14:37 Hannes Reinecke
2022-03-01 14:37 ` [PATCH 1/5] lpfc: kill lpfc_bus_reset_handler Hannes Reinecke
` (6 more replies)
0 siblings, 7 replies; 12+ messages in thread
From: Hannes Reinecke @ 2022-03-01 14:37 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke
Hi all,
in preparation to the SCSI EH rework here's a bunch of patches to
the lpfc driver to make the conversion easier.
As usual, comments and reviews are welcome.
Hannes Reinecke (5):
lpfc: kill lpfc_bus_reset_handler
lpfc: drop lpfc_no_handler()
lpfc: use fc_block_rport()
lpfc: use rport as argument for lpfc_send_taskmgmt()
lpfc: use rport as argument for lpfc_chk_tgt_mapped()
drivers/scsi/lpfc/lpfc_scsi.c | 141 ++++++----------------------------
1 file changed, 22 insertions(+), 119 deletions(-)
--
2.29.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/5] lpfc: kill lpfc_bus_reset_handler
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
@ 2022-03-01 14:37 ` Hannes Reinecke
2022-03-01 15:55 ` Christoph Hellwig
2022-03-01 14:37 ` [PATCH 2/5] lpfc: drop lpfc_no_handler() Hannes Reinecke
` (5 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Hannes Reinecke @ 2022-03-01 14:37 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
James Smart, James Smart
lpfc_bus_reset_handler is really just a loop calling
lpfc_target_reset_handler() over all targets, which is what
the error handler will be doing anyway.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Cc: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_scsi.c | 91 -----------------------------------
1 file changed, 91 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 5a3da38a9067..a061b4ed4b00 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6528,95 +6528,6 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
return status;
}
-/**
- * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
- * @cmnd: Pointer to scsi_cmnd data structure.
- *
- * This routine does target reset to all targets on @cmnd->device->host.
- * This emulates Parallel SCSI Bus Reset Semantics.
- *
- * Return code :
- * 0x2003 - Error
- * 0x2002 - Success
- **/
-static int
-lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
-{
- struct Scsi_Host *shost = cmnd->device->host;
- struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_nodelist *ndlp = NULL;
- struct lpfc_scsi_event_header scsi_event;
- int match;
- int ret = SUCCESS, status, i;
- u32 logit = LOG_FCP;
-
- scsi_event.event_type = FC_REG_SCSI_EVENT;
- scsi_event.subcategory = LPFC_EVENT_BUSRESET;
- scsi_event.lun = 0;
- memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
- memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
-
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
-
- status = fc_block_scsi_eh(cmnd);
- if (status != 0 && status != SUCCESS)
- return status;
-
- /*
- * Since the driver manages a single bus device, reset all
- * targets known to the driver. Should any target reset
- * fail, this routine returns failure to the midlayer.
- */
- for (i = 0; i < LPFC_MAX_TARGET; i++) {
- /* Search for mapped node by target ID */
- match = 0;
- spin_lock_irq(shost->host_lock);
- list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
-
- if (vport->phba->cfg_fcp2_no_tgt_reset &&
- (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE))
- continue;
- if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
- ndlp->nlp_sid == i &&
- ndlp->rport &&
- ndlp->nlp_type & NLP_FCP_TARGET) {
- match = 1;
- break;
- }
- }
- spin_unlock_irq(shost->host_lock);
- if (!match)
- continue;
-
- status = lpfc_send_taskmgmt(vport, cmnd,
- i, 0, FCP_TARGET_RESET);
-
- if (status != SUCCESS) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
- "0700 Bus Reset on target %d failed\n",
- i);
- ret = FAILED;
- }
- }
- /*
- * We have to clean up i/o as : they may be orphaned by the TMFs
- * above; or if any of the TMFs failed, they may be in an
- * indeterminate state.
- * We will report success if all the i/o aborts successfully.
- */
-
- status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
- if (status != SUCCESS)
- ret = FAILED;
- if (ret == FAILED)
- logit = LOG_TRACE_EVENT;
-
- lpfc_printf_vlog(vport, KERN_ERR, logit,
- "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
- return ret;
-}
-
/**
* lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt
* @cmnd: Pointer to scsi_cmnd data structure.
@@ -7203,7 +7114,6 @@ struct scsi_host_template lpfc_template_nvme = {
.eh_abort_handler = lpfc_no_handler,
.eh_device_reset_handler = lpfc_no_handler,
.eh_target_reset_handler = lpfc_no_handler,
- .eh_bus_reset_handler = lpfc_no_handler,
.eh_host_reset_handler = lpfc_no_handler,
.slave_alloc = lpfc_no_slave,
.slave_configure = lpfc_no_slave,
@@ -7228,7 +7138,6 @@ struct scsi_host_template lpfc_template = {
.eh_abort_handler = lpfc_abort_handler,
.eh_device_reset_handler = lpfc_device_reset_handler,
.eh_target_reset_handler = lpfc_target_reset_handler,
- .eh_bus_reset_handler = lpfc_bus_reset_handler,
.eh_host_reset_handler = lpfc_host_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
--
2.29.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/5] lpfc: drop lpfc_no_handler()
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
2022-03-01 14:37 ` [PATCH 1/5] lpfc: kill lpfc_bus_reset_handler Hannes Reinecke
@ 2022-03-01 14:37 ` Hannes Reinecke
2022-03-01 14:37 ` [PATCH 3/5] lpfc: use fc_block_rport() Hannes Reinecke
` (4 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Hannes Reinecke @ 2022-03-01 14:37 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
James Smart, James Smart
The default SCSI EH action for a non-existing EH callback is to
return FAILED, so having a callback just returning FAILED is pointless.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Cc: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_scsi.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a061b4ed4b00..943f7e826ccb 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -7093,12 +7093,6 @@ lpfc_no_command(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
return SCSI_MLQUEUE_HOST_BUSY;
}
-static int
-lpfc_no_handler(struct scsi_cmnd *cmnd)
-{
- return FAILED;
-}
-
static int
lpfc_no_slave(struct scsi_device *sdev)
{
@@ -7111,10 +7105,6 @@ struct scsi_host_template lpfc_template_nvme = {
.proc_name = LPFC_DRIVER_NAME,
.info = lpfc_info,
.queuecommand = lpfc_no_command,
- .eh_abort_handler = lpfc_no_handler,
- .eh_device_reset_handler = lpfc_no_handler,
- .eh_target_reset_handler = lpfc_no_handler,
- .eh_host_reset_handler = lpfc_no_handler,
.slave_alloc = lpfc_no_slave,
.slave_configure = lpfc_no_slave,
.scan_finished = lpfc_scan_finished,
--
2.29.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/5] lpfc: use fc_block_rport()
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
2022-03-01 14:37 ` [PATCH 1/5] lpfc: kill lpfc_bus_reset_handler Hannes Reinecke
2022-03-01 14:37 ` [PATCH 2/5] lpfc: drop lpfc_no_handler() Hannes Reinecke
@ 2022-03-01 14:37 ` Hannes Reinecke
2022-03-01 15:55 ` Christoph Hellwig
2022-03-01 14:37 ` [PATCH 4/5] lpfc: use rport as argument for lpfc_send_taskmgmt() Hannes Reinecke
` (3 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Hannes Reinecke @ 2022-03-01 14:37 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
James Smart, James Smart
Use fc_block_rport() instead of fc_block_scsi_eh() as the SCSI command
will be removed as argument for SCSI EH functions.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Cc: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_scsi.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 943f7e826ccb..4d55bcb627db 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5888,6 +5888,7 @@ static int
lpfc_abort_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *iocb;
@@ -5899,7 +5900,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
unsigned long flags;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
- status = fc_block_scsi_eh(cmnd);
+ status = fc_block_rport(rport);
if (status != 0 && status != SUCCESS)
return status;
@@ -6348,6 +6349,7 @@ static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_rport_data *rdata;
struct lpfc_nodelist *pnode;
@@ -6357,7 +6359,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
int status;
u32 logit = LOG_FCP;
- rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
+ rdata = rport->dd_data;
if (!rdata || !rdata->pnode) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0798 Device Reset rdata failure: rdata x%px\n",
@@ -6365,7 +6367,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
return FAILED;
}
pnode = rdata->pnode;
- status = fc_block_scsi_eh(cmnd);
+ status = fc_block_rport(rport);
if (status != 0 && status != SUCCESS)
return status;
@@ -6422,6 +6424,7 @@ static int
lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_rport_data *rdata;
struct lpfc_nodelist *pnode;
@@ -6434,7 +6437,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
unsigned long flags;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
- rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
+ rdata = rport->dd_data;
if (!rdata || !rdata->pnode) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0799 Target Reset rdata failure: rdata x%px\n",
@@ -6442,7 +6445,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
return FAILED;
}
pnode = rdata->pnode;
- status = fc_block_scsi_eh(cmnd);
+ status = fc_block_rport(rport);
if (status != 0 && status != SUCCESS)
return status;
--
2.29.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 4/5] lpfc: use rport as argument for lpfc_send_taskmgmt()
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
` (2 preceding siblings ...)
2022-03-01 14:37 ` [PATCH 3/5] lpfc: use fc_block_rport() Hannes Reinecke
@ 2022-03-01 14:37 ` Hannes Reinecke
2022-03-01 15:55 ` Christoph Hellwig
2022-03-01 14:37 ` [PATCH 5/5] lpfc: use rport as argument for lpfc_chk_tgt_mapped() Hannes Reinecke
` (2 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Hannes Reinecke @ 2022-03-01 14:37 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
Hannes Reinecke, James Smart, James Smart
Instead of passing in a scsi device we should be using the rport;
we already have the target and lun id as parameters, so there's
no need to pass the scsi device, too.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Cc: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_scsi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 4d55bcb627db..778e40d751ac 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6142,7 +6142,7 @@ lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_io_buf *lpfc_cmd)
/**
* lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
* @vport: The virtual port for which this call is being executed.
- * @cmnd: Pointer to scsi_cmnd data structure.
+ * @rport: Pointer to remote port
* @tgt_id: Target ID of remote device.
* @lun_id: Lun number for the TMF
* @task_mgmt_cmd: type of TMF to send
@@ -6155,7 +6155,7 @@ lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_io_buf *lpfc_cmd)
* 0x2002 - Success.
**/
static int
-lpfc_send_taskmgmt(struct lpfc_vport *vport, struct scsi_cmnd *cmnd,
+lpfc_send_taskmgmt(struct lpfc_vport *vport, struct fc_rport *rport,
unsigned int tgt_id, uint64_t lun_id,
uint8_t task_mgmt_cmd)
{
@@ -6168,7 +6168,7 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct scsi_cmnd *cmnd,
int ret;
int status;
- rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
+ rdata = rport->dd_data;
if (!rdata || !rdata->pnode)
return FAILED;
pnode = rdata->pnode;
@@ -6178,7 +6178,7 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct scsi_cmnd *cmnd,
return FAILED;
lpfc_cmd->timeout = phba->cfg_task_mgmt_tmo;
lpfc_cmd->rdata = rdata;
- lpfc_cmd->pCmd = cmnd;
+ lpfc_cmd->pCmd = NULL;
lpfc_cmd->ndlp = pnode;
status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
@@ -6387,7 +6387,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
- status = lpfc_send_taskmgmt(vport, cmnd, tgt_id, lun_id,
+ status = lpfc_send_taskmgmt(vport, rport, tgt_id, lun_id,
FCP_LUN_RESET);
if (status != SUCCESS)
logit = LOG_TRACE_EVENT;
@@ -6473,7 +6473,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
- status = lpfc_send_taskmgmt(vport, cmnd, tgt_id, lun_id,
+ status = lpfc_send_taskmgmt(vport, rport, tgt_id, lun_id,
FCP_TARGET_RESET);
if (status != SUCCESS) {
logit = LOG_TRACE_EVENT;
--
2.29.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 5/5] lpfc: use rport as argument for lpfc_chk_tgt_mapped()
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
` (3 preceding siblings ...)
2022-03-01 14:37 ` [PATCH 4/5] lpfc: use rport as argument for lpfc_send_taskmgmt() Hannes Reinecke
@ 2022-03-01 14:37 ` Hannes Reinecke
2022-03-01 15:56 ` Christoph Hellwig
2022-03-02 4:32 ` [PATCH 0/5] lpfc: fixes for EH rework Martin K. Petersen
2022-03-09 4:14 ` Martin K. Petersen
6 siblings, 1 reply; 12+ messages in thread
From: Hannes Reinecke @ 2022-03-01 14:37 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, linux-scsi, Hannes Reinecke,
Hannes Reinecke, James Smart, James Smart
We only need the rport structure for lpfc_chk_tgt_mapped().
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Cc: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_scsi.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 778e40d751ac..79453dc6593d 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6244,7 +6244,7 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct fc_rport *rport,
/**
* lpfc_chk_tgt_mapped -
* @vport: The virtual port to check on
- * @cmnd: Pointer to scsi_cmnd data structure.
+ * @rport: Pointer to fc_rport data structure.
*
* This routine delays until the scsi target (aka rport) for the
* command exists (is present and logged in) or we declare it non-existent.
@@ -6254,19 +6254,20 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct fc_rport *rport,
* 0x2002 - Success
**/
static int
-lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
+lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct fc_rport *rport)
{
struct lpfc_rport_data *rdata;
- struct lpfc_nodelist *pnode;
+ struct lpfc_nodelist *pnode = NULL;
unsigned long later;
- rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
+ rdata = rport->dd_data;
if (!rdata) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0797 Tgt Map rport failure: rdata x%px\n", rdata);
return FAILED;
}
pnode = rdata->pnode;
+
/*
* If target is not in a MAPPED state, delay until
* target is rediscovered or devloss timeout expires.
@@ -6278,7 +6279,7 @@ lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
return SUCCESS;
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
- rdata = lpfc_rport_data_from_scsi_device(cmnd->device);
+ rdata = rport->dd_data;
if (!rdata)
return FAILED;
pnode = rdata->pnode;
@@ -6371,7 +6372,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
if (status != 0 && status != SUCCESS)
return status;
- status = lpfc_chk_tgt_mapped(vport, cmnd);
+ status = lpfc_chk_tgt_mapped(vport, rport);
if (status == FAILED) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0721 Device Reset rport failure: rdata x%px\n", rdata);
@@ -6449,7 +6450,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
if (status != 0 && status != SUCCESS)
return status;
- status = lpfc_chk_tgt_mapped(vport, cmnd);
+ status = lpfc_chk_tgt_mapped(vport, rport);
if (status == FAILED) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0722 Target Reset rport failure: rdata x%px\n", rdata);
--
2.29.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/5] lpfc: kill lpfc_bus_reset_handler
2022-03-01 14:37 ` [PATCH 1/5] lpfc: kill lpfc_bus_reset_handler Hannes Reinecke
@ 2022-03-01 15:55 ` Christoph Hellwig
0 siblings, 0 replies; 12+ messages in thread
From: Christoph Hellwig @ 2022-03-01 15:55 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, James Smart, James Smart
On Tue, Mar 01, 2022 at 03:37:14PM +0100, Hannes Reinecke wrote:
> lpfc_bus_reset_handler is really just a loop calling
> lpfc_target_reset_handler() over all targets, which is what
> the error handler will be doing anyway.
Looks good:
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/5] lpfc: use fc_block_rport()
2022-03-01 14:37 ` [PATCH 3/5] lpfc: use fc_block_rport() Hannes Reinecke
@ 2022-03-01 15:55 ` Christoph Hellwig
0 siblings, 0 replies; 12+ messages in thread
From: Christoph Hellwig @ 2022-03-01 15:55 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, James Smart, James Smart
On Tue, Mar 01, 2022 at 03:37:16PM +0100, Hannes Reinecke wrote:
> Use fc_block_rport() instead of fc_block_scsi_eh() as the SCSI command
> will be removed as argument for SCSI EH functions.
Looks good,
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 4/5] lpfc: use rport as argument for lpfc_send_taskmgmt()
2022-03-01 14:37 ` [PATCH 4/5] lpfc: use rport as argument for lpfc_send_taskmgmt() Hannes Reinecke
@ 2022-03-01 15:55 ` Christoph Hellwig
0 siblings, 0 replies; 12+ messages in thread
From: Christoph Hellwig @ 2022-03-01 15:55 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, Hannes Reinecke, James Smart, James Smart
Looks good,
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 5/5] lpfc: use rport as argument for lpfc_chk_tgt_mapped()
2022-03-01 14:37 ` [PATCH 5/5] lpfc: use rport as argument for lpfc_chk_tgt_mapped() Hannes Reinecke
@ 2022-03-01 15:56 ` Christoph Hellwig
0 siblings, 0 replies; 12+ messages in thread
From: Christoph Hellwig @ 2022-03-01 15:56 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley,
linux-scsi, Hannes Reinecke, James Smart, James Smart
Looks good,
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/5] lpfc: fixes for EH rework
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
` (4 preceding siblings ...)
2022-03-01 14:37 ` [PATCH 5/5] lpfc: use rport as argument for lpfc_chk_tgt_mapped() Hannes Reinecke
@ 2022-03-02 4:32 ` Martin K. Petersen
2022-03-09 4:14 ` Martin K. Petersen
6 siblings, 0 replies; 12+ messages in thread
From: Martin K. Petersen @ 2022-03-02 4:32 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K. Petersen, Christoph Hellwig, James Bottomley, linux-scsi
Hannes,
> in preparation to the SCSI EH rework here's a bunch of patches to the
> lpfc driver to make the conversion easier.
Applied to 5.18/scsi-staging, thanks!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/5] lpfc: fixes for EH rework
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
` (5 preceding siblings ...)
2022-03-02 4:32 ` [PATCH 0/5] lpfc: fixes for EH rework Martin K. Petersen
@ 2022-03-09 4:14 ` Martin K. Petersen
6 siblings, 0 replies; 12+ messages in thread
From: Martin K. Petersen @ 2022-03-09 4:14 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Martin K . Petersen, James Bottomley, Christoph Hellwig, linux-scsi
On Tue, 1 Mar 2022 15:37:13 +0100, Hannes Reinecke wrote:
> in preparation to the SCSI EH rework here's a bunch of patches to
> the lpfc driver to make the conversion easier.
>
> As usual, comments and reviews are welcome.
>
> Hannes Reinecke (5):
> lpfc: kill lpfc_bus_reset_handler
> lpfc: drop lpfc_no_handler()
> lpfc: use fc_block_rport()
> lpfc: use rport as argument for lpfc_send_taskmgmt()
> lpfc: use rport as argument for lpfc_chk_tgt_mapped()
>
> [...]
Applied to 5.18/scsi-queue, thanks!
[1/5] lpfc: kill lpfc_bus_reset_handler
https://git.kernel.org/mkp/scsi/c/bf180cc1a5da
[2/5] lpfc: drop lpfc_no_handler()
https://git.kernel.org/mkp/scsi/c/45c59287ff01
[3/5] lpfc: use fc_block_rport()
https://git.kernel.org/mkp/scsi/c/bb21fc9911ee
[4/5] lpfc: use rport as argument for lpfc_send_taskmgmt()
https://git.kernel.org/mkp/scsi/c/123a3af35d08
[5/5] lpfc: use rport as argument for lpfc_chk_tgt_mapped()
https://git.kernel.org/mkp/scsi/c/e81ce97f5716
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2022-03-09 4:14 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-01 14:37 [PATCH 0/5] lpfc: fixes for EH rework Hannes Reinecke
2022-03-01 14:37 ` [PATCH 1/5] lpfc: kill lpfc_bus_reset_handler Hannes Reinecke
2022-03-01 15:55 ` Christoph Hellwig
2022-03-01 14:37 ` [PATCH 2/5] lpfc: drop lpfc_no_handler() Hannes Reinecke
2022-03-01 14:37 ` [PATCH 3/5] lpfc: use fc_block_rport() Hannes Reinecke
2022-03-01 15:55 ` Christoph Hellwig
2022-03-01 14:37 ` [PATCH 4/5] lpfc: use rport as argument for lpfc_send_taskmgmt() Hannes Reinecke
2022-03-01 15:55 ` Christoph Hellwig
2022-03-01 14:37 ` [PATCH 5/5] lpfc: use rport as argument for lpfc_chk_tgt_mapped() Hannes Reinecke
2022-03-01 15:56 ` Christoph Hellwig
2022-03-02 4:32 ` [PATCH 0/5] lpfc: fixes for EH rework Martin K. Petersen
2022-03-09 4:14 ` Martin K. Petersen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.