[PATCH v3 0/7] isa: Resolve unneeded IRQ attributes from ISADevice

[PATCH v3 0/7] isa: Resolve unneeded IRQ attributes from ISADevice

[Bernhard Beschow]

v3:
* Use DEFINE_PROP_UINT8 / uint8_t for new IRQ properties. (Philippe)
* Use "%u" format when printing maximum allowed IRQ number in error messages.
  (Philippe)
* Use object_property_get_uint() in pnv.c. (Philippe)
* Squash cleanup patches (7-22) into
  "Inline and remove one-line isa_init_irq()" (Philippe)
* Mention in the commit message of patch 1 that mc146818rtc has its IRQ number
  now displayed in the human monitor. Since the IRQ numbers of the other
  "QOM'ified" devices were already displayed I've only adapted this commit
  message. (Philippe)

v2:
* The newly QOM'ified devices now report an error to the user in their realize
  functions if the configured IRQ number is greater than 15. (PMM)

v1:
The IRQ attributes of ISADevice are hardcoded to support up to two IRQs per
device which creates an artificial limit. By not having the attributes in the
first place, this limitation can be avoided altogether.

The IRQ attributes are mostly used for printing ('info qtree') and there is one
user, hw/ppc/pnv, to use the attributes directly. As it turns out, the printing
is redundant if the IRQ numbers are exposed as QOM properties and hw/ppc/pnv
can be easily ported away.

The patch series is structured as follows: Patch 1-3 QOM'ify the last devices
which rely on printing their IRQ numbers via the ISADevice attributes. Patch
4 and 5 remove the last users of the ISADevice attributes such that they can be
removed in patch 6. The remainder of the patch series is cleanup.

Patch 6 turns isa_init_irq() into a trivial wrapper for isa_get_irq(). That is,
the former function becomes redundant. All users are therefore converted to use
isa_get_irq() directly. Finally, the last patch removes the now unused
isa_init_irq().


Bernhard Beschow (7):
  hw/rtc/mc146818rtc: QOM'ify IRQ number
  hw/rtc/m48t59-isa: QOM'ify IRQ number
  hw/input/pckbd: QOM'ify IRQ numbers
  hw/isa/isa-bus: Remove isabus_dev_print()
  hw/ppc/pnv: Determine ns16550's IRQ number from QOM property
  isa: Drop unused attributes from ISADevice
  isa: Inline and remove one-line isa_init_irq()

 hw/audio/cs4231a.c           |  2 +-
 hw/audio/gus.c               |  2 +-
 hw/audio/sb16.c              |  2 +-
 hw/block/fdc-isa.c           |  2 +-
 hw/char/parallel.c           |  2 +-
 hw/char/serial-isa.c         |  2 +-
 hw/ide/isa.c                 |  2 +-
 hw/input/pckbd.c             | 26 +++++++++++++++++++++----
 hw/ipmi/isa_ipmi_bt.c        |  2 +-
 hw/ipmi/isa_ipmi_kcs.c       |  2 +-
 hw/isa/isa-bus.c             | 37 +-----------------------------------
 hw/isa/piix4.c               |  2 +-
 hw/net/ne2000-isa.c          |  2 +-
 hw/ppc/pnv.c                 |  5 ++++-
 hw/rtc/m48t59-isa.c          |  9 ++++++++-
 hw/rtc/mc146818rtc.c         | 13 +++++++++++--
 hw/tpm/tpm_tis_isa.c         |  2 +-
 include/hw/isa/isa.h         |  3 ---
 include/hw/rtc/mc146818rtc.h |  1 +
 tests/qemu-iotests/172.out   | 26 -------------------------
 20 files changed, 59 insertions(+), 85 deletions(-)

-- 
2.35.1

[PATCH v3 1/7] hw/rtc/mc146818rtc: QOM'ify IRQ number

[Bernhard Beschow]

Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be displayed in HMP:

Before:

(qemu) info qtree
       ...
          dev: mc146818rtc, id ""
            gpio-out "" 1
            base_year = 0 (0x0)
            lost_tick_policy = "discard"

After:

          dev: mc146818rtc, id ""
            gpio-out "" 1
            base_year = 0 (0x0)
            irq = 8 (0x8)
            lost_tick_policy = "discard"

The reason the IRQ number didn's show up before is that this device does not
call isa_init_irq().

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/isa/piix4.c               |  2 +-
 hw/rtc/mc146818rtc.c         | 13 +++++++++++--
 include/hw/rtc/mc146818rtc.h |  1 +
 3 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/hw/isa/piix4.c b/hw/isa/piix4.c
index 0fe7b69bc4..cb291d121c 100644
--- a/hw/isa/piix4.c
+++ b/hw/isa/piix4.c
@@ -197,7 +197,7 @@ static void piix4_realize(PCIDevice *dev, Error **errp)
     if (!qdev_realize(DEVICE(&s->rtc), BUS(isa_bus), errp)) {
         return;
     }
-    isa_init_irq(ISA_DEVICE(&s->rtc), &s->rtc.irq, RTC_ISA_IRQ);
+    isa_init_irq(ISA_DEVICE(&s->rtc), &s->rtc.irq, s->rtc.isairq);
 
     piix4_dev = dev;
 }
diff --git a/hw/rtc/mc146818rtc.c b/hw/rtc/mc146818rtc.c
index ac9a60c90e..f235c2ddbe 100644
--- a/hw/rtc/mc146818rtc.c
+++ b/hw/rtc/mc146818rtc.c
@@ -912,6 +912,11 @@ static void rtc_realizefn(DeviceState *dev, Error **errp)
         s->base_year = 0;
     }
 
+    if (s->isairq >= ISA_NUM_IRQS) {
+        error_setg(errp, "Maximum value for \"irq\" is: %u", ISA_NUM_IRQS - 1);
+        return;
+    }
+
     rtc_set_date_from_host(isadev);
 
     switch (s->lost_tick_policy) {
@@ -957,15 +962,17 @@ ISADevice *mc146818_rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq)
 {
     DeviceState *dev;
     ISADevice *isadev;
+    RTCState *s;
 
     isadev = isa_new(TYPE_MC146818_RTC);
     dev = DEVICE(isadev);
+    s = MC146818_RTC(isadev);
     qdev_prop_set_int32(dev, "base_year", base_year);
     isa_realize_and_unref(isadev, bus, &error_fatal);
     if (intercept_irq) {
         qdev_connect_gpio_out(dev, 0, intercept_irq);
     } else {
-        isa_connect_gpio_out(isadev, 0, RTC_ISA_IRQ);
+        isa_connect_gpio_out(isadev, 0, s->isairq);
     }
 
     object_property_add_alias(qdev_get_machine(), "rtc-time", OBJECT(isadev),
@@ -976,6 +983,7 @@ ISADevice *mc146818_rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq)
 
 static Property mc146818rtc_properties[] = {
     DEFINE_PROP_INT32("base_year", RTCState, base_year, 1980),
+    DEFINE_PROP_UINT8("irq", RTCState, isairq, RTC_ISA_IRQ),
     DEFINE_PROP_LOSTTICKPOLICY("lost_tick_policy", RTCState,
                                lost_tick_policy, LOST_TICK_POLICY_DISCARD),
     DEFINE_PROP_END_OF_LIST(),
@@ -1011,6 +1019,7 @@ static void rtc_reset_hold(Object *obj)
 
 static void rtc_build_aml(ISADevice *isadev, Aml *scope)
 {
+    RTCState *s = MC146818_RTC(isadev);
     Aml *dev;
     Aml *crs;
 
@@ -1021,7 +1030,7 @@ static void rtc_build_aml(ISADevice *isadev, Aml *scope)
     crs = aml_resource_template();
     aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,
                            0x01, 0x08));
-    aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
+    aml_append(crs, aml_irq_no_flags(s->isairq));
 
     dev = aml_device("RTC");
     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
diff --git a/include/hw/rtc/mc146818rtc.h b/include/hw/rtc/mc146818rtc.h
index 5b45b22924..deef93f89a 100644
--- a/include/hw/rtc/mc146818rtc.h
+++ b/include/hw/rtc/mc146818rtc.h
@@ -25,6 +25,7 @@ struct RTCState {
     MemoryRegion coalesced_io;
     uint8_t cmos_data[128];
     uint8_t cmos_index;
+    uint8_t isairq;
     int32_t base_year;
     uint64_t base_rtc;
     uint64_t last_update;
-- 
2.35.1

[PATCH v3 2/7] hw/rtc/m48t59-isa: QOM'ify IRQ number

[Bernhard Beschow]

Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be printed by standard QOM mechanisms. This allows
isabus_dev_print() to be retired eventually.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/rtc/m48t59-isa.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/hw/rtc/m48t59-isa.c b/hw/rtc/m48t59-isa.c
index dc21fb10a5..e9086eada4 100644
--- a/hw/rtc/m48t59-isa.c
+++ b/hw/rtc/m48t59-isa.c
@@ -42,6 +42,7 @@ struct M48txxISAState {
     ISADevice parent_obj;
     M48t59State state;
     uint32_t io_base;
+    uint8_t isairq;
     MemoryRegion io;
 };
 
@@ -79,6 +80,7 @@ static void m48txx_isa_toggle_lock(Nvram *obj, int lock)
 static Property m48t59_isa_properties[] = {
     DEFINE_PROP_INT32("base-year", M48txxISAState, state.base_year, 0),
     DEFINE_PROP_UINT32("iobase", M48txxISAState, io_base, 0x74),
+    DEFINE_PROP_UINT8("irq", M48txxISAState, isairq, 8),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -97,9 +99,14 @@ static void m48t59_isa_realize(DeviceState *dev, Error **errp)
     M48txxISAState *d = M48TXX_ISA(dev);
     M48t59State *s = &d->state;
 
+    if (d->isairq >= ISA_NUM_IRQS) {
+        error_setg(errp, "Maximum value for \"irq\" is: %u", ISA_NUM_IRQS - 1);
+        return;
+    }
+
     s->model = u->info.model;
     s->size = u->info.size;
-    isa_init_irq(isadev, &s->IRQ, 8);
+    isa_init_irq(isadev, &s->IRQ, d->isairq);
     m48t59_realize_common(s, errp);
     memory_region_init_io(&d->io, OBJECT(dev), &m48t59_io_ops, s, "m48t59", 4);
     if (d->io_base != 0) {
-- 
2.35.1

[PATCH v3 3/7] hw/input/pckbd: QOM'ify IRQ numbers

[Bernhard Beschow]

Exposing the IRQ numbers as QOM properties not only allows them to be
configurable but also to be printed by standard QOM mechanisms. This
allows isabus_dev_print() to be retired eventually.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/input/pckbd.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c
index baba62f357..eb77e12f6f 100644
--- a/hw/input/pckbd.c
+++ b/hw/input/pckbd.c
@@ -26,6 +26,7 @@
 #include "qemu/error-report.h"
 #include "qemu/log.h"
 #include "qemu/timer.h"
+#include "qapi/error.h"
 #include "hw/isa/isa.h"
 #include "migration/vmstate.h"
 #include "hw/acpi/aml-build.h"
@@ -671,6 +672,8 @@ struct ISAKBDState {
     KBDState kbd;
     bool kbd_throttle;
     MemoryRegion io[2];
+    uint8_t kbd_irq;
+    uint8_t mouse_irq;
 };
 
 void i8042_isa_mouse_fake_event(ISAKBDState *isa)
@@ -734,8 +737,20 @@ static void i8042_realizefn(DeviceState *dev, Error **errp)
     ISAKBDState *isa_s = I8042(dev);
     KBDState *s = &isa_s->kbd;
 
-    isa_init_irq(isadev, &s->irq_kbd, 1);
-    isa_init_irq(isadev, &s->irq_mouse, 12);
+    if (isa_s->kbd_irq >= ISA_NUM_IRQS) {
+        error_setg(errp, "Maximum value for \"kbd-irq\" is: %u",
+                   ISA_NUM_IRQS - 1);
+        return;
+    }
+
+    if (isa_s->mouse_irq >= ISA_NUM_IRQS) {
+        error_setg(errp, "Maximum value for \"mouse-irq\" is: %u",
+                   ISA_NUM_IRQS - 1);
+        return;
+    }
+
+    isa_init_irq(isadev, &s->irq_kbd, isa_s->kbd_irq);
+    isa_init_irq(isadev, &s->irq_mouse, isa_s->mouse_irq);
 
     isa_register_ioport(isadev, isa_s->io + 0, 0x60);
     isa_register_ioport(isadev, isa_s->io + 1, 0x64);
@@ -754,6 +769,7 @@ static void i8042_realizefn(DeviceState *dev, Error **errp)
 
 static void i8042_build_aml(ISADevice *isadev, Aml *scope)
 {
+    ISAKBDState *isa_s = I8042(isadev);
     Aml *kbd;
     Aml *mou;
     Aml *crs;
@@ -761,7 +777,7 @@ static void i8042_build_aml(ISADevice *isadev, Aml *scope)
     crs = aml_resource_template();
     aml_append(crs, aml_io(AML_DECODE16, 0x0060, 0x0060, 0x01, 0x01));
     aml_append(crs, aml_io(AML_DECODE16, 0x0064, 0x0064, 0x01, 0x01));
-    aml_append(crs, aml_irq_no_flags(1));
+    aml_append(crs, aml_irq_no_flags(isa_s->kbd_irq));
 
     kbd = aml_device("KBD");
     aml_append(kbd, aml_name_decl("_HID", aml_eisaid("PNP0303")));
@@ -769,7 +785,7 @@ static void i8042_build_aml(ISADevice *isadev, Aml *scope)
     aml_append(kbd, aml_name_decl("_CRS", crs));
 
     crs = aml_resource_template();
-    aml_append(crs, aml_irq_no_flags(12));
+    aml_append(crs, aml_irq_no_flags(isa_s->mouse_irq));
 
     mou = aml_device("MOU");
     aml_append(mou, aml_name_decl("_HID", aml_eisaid("PNP0F13")));
@@ -783,6 +799,8 @@ static void i8042_build_aml(ISADevice *isadev, Aml *scope)
 static Property i8042_properties[] = {
     DEFINE_PROP_BOOL("extended-state", ISAKBDState, kbd.extended_state, true),
     DEFINE_PROP_BOOL("kbd-throttle", ISAKBDState, kbd_throttle, false),
+    DEFINE_PROP_UINT8("kbd-irq", ISAKBDState, kbd_irq, 1),
+    DEFINE_PROP_UINT8("mouse-irq", ISAKBDState, mouse_irq, 12),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.35.1

[PATCH v3 4/7] hw/isa/isa-bus: Remove isabus_dev_print()

[Bernhard Beschow]

All isabus_dev_print() did was to print up to two IRQ numbers per
device. This is redundant if the IRQ numbers are present as QOM
properties (see e.g. the modified tests/qemu-iotests/172.out).

Now that the last devices relying on isabus_dev_print() had their IRQ
numbers QOM'ified, the contribution of this function ultimately became
redundant. Remove it.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/isa/isa-bus.c           | 16 ----------------
 tests/qemu-iotests/172.out | 26 --------------------------
 2 files changed, 42 deletions(-)

diff --git a/hw/isa/isa-bus.c b/hw/isa/isa-bus.c
index 6c31398dda..af5add6a26 100644
--- a/hw/isa/isa-bus.c
+++ b/hw/isa/isa-bus.c
@@ -21,21 +21,18 @@
 #include "qemu/error-report.h"
 #include "qemu/module.h"
 #include "qapi/error.h"
-#include "monitor/monitor.h"
 #include "hw/sysbus.h"
 #include "sysemu/sysemu.h"
 #include "hw/isa/isa.h"
 
 static ISABus *isabus;
 
-static void isabus_dev_print(Monitor *mon, DeviceState *dev, int indent);
 static char *isabus_get_fw_dev_path(DeviceState *dev);
 
 static void isa_bus_class_init(ObjectClass *klass, void *data)
 {
     BusClass *k = BUS_CLASS(klass);
 
-    k->print_dev = isabus_dev_print;
     k->get_fw_dev_path = isabus_get_fw_dev_path;
 }
 
@@ -222,19 +219,6 @@ void isa_build_aml(ISABus *bus, Aml *scope)
     }
 }
 
-static void isabus_dev_print(Monitor *mon, DeviceState *dev, int indent)
-{
-    ISADevice *d = ISA_DEVICE(dev);
-
-    if (d->isairq[1] != -1) {
-        monitor_printf(mon, "%*sisa irqs %d,%d\n", indent, "",
-                       d->isairq[0], d->isairq[1]);
-    } else if (d->isairq[0] != -1) {
-        monitor_printf(mon, "%*sisa irq %d\n", indent, "",
-                       d->isairq[0]);
-    }
-}
-
 static void isabus_bridge_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
diff --git a/tests/qemu-iotests/172.out b/tests/qemu-iotests/172.out
index 4cf4d536b4..9479b92185 100644
--- a/tests/qemu-iotests/172.out
+++ b/tests/qemu-iotests/172.out
@@ -15,7 +15,6 @@ Testing:
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -43,7 +42,6 @@ Testing: -fda TEST_DIR/t.qcow2
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -81,7 +79,6 @@ Testing: -fdb TEST_DIR/t.qcow2
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -135,7 +132,6 @@ Testing: -fda TEST_DIR/t.qcow2 -fdb TEST_DIR/t.qcow2.2
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -190,7 +186,6 @@ Testing: -fdb
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -230,7 +225,6 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -268,7 +262,6 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2,index=1
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -322,7 +315,6 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=floppy,file=TEST_DIR/t
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -380,7 +372,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -418,7 +409,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=1
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -456,7 +446,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qco
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -520,7 +509,6 @@ Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -575,7 +563,6 @@ Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -630,7 +617,6 @@ Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -685,7 +671,6 @@ Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -749,7 +734,6 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.q
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -804,7 +788,6 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.q
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -865,7 +848,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -global floppy.drive=none0 -device
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -933,7 +915,6 @@ Testing: -device floppy
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -958,7 +939,6 @@ Testing: -device floppy,drive-type=120
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -983,7 +963,6 @@ Testing: -device floppy,drive-type=144
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -1008,7 +987,6 @@ Testing: -device floppy,drive-type=288
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -1036,7 +1014,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,drive-t
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -1074,7 +1051,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,drive-t
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -1115,7 +1091,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,logical
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
@@ -1153,7 +1128,6 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,physica
             fdtypeA = "auto"
             fdtypeB = "auto"
             fallback = "288"
-            isa irq 6
             bus: floppy-bus.0
               type floppy-bus
               dev: floppy, id ""
-- 
2.35.1

[PATCH v3 5/7] hw/ppc/pnv: Determine ns16550's IRQ number from QOM property

[Bernhard Beschow]

Determine the IRQ number in the same way as for pnv_dt_ipmi_bt(). This
resolves one usage of ISADevice::isairq[] which allows it to be removed
eventually.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/ppc/pnv.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
index 837146a2fb..441bf958ca 100644
--- a/hw/ppc/pnv.c
+++ b/hw/ppc/pnv.c
@@ -380,9 +380,12 @@ static void pnv_dt_serial(ISADevice *d, void *fdt, int lpc_off)
         cpu_to_be32(io_base),
         cpu_to_be32(8)
     };
+    uint32_t irq;
     char *name;
     int node;
 
+    irq = object_property_get_uint(OBJECT(d), "irq", &error_fatal);
+
     name = g_strdup_printf("%s@i%x", qdev_fw_name(DEVICE(d)), io_base);
     node = fdt_add_subnode(fdt, lpc_off, name);
     _FDT(node);
@@ -394,7 +397,7 @@ static void pnv_dt_serial(ISADevice *d, void *fdt, int lpc_off)
 
     _FDT((fdt_setprop_cell(fdt, node, "clock-frequency", 1843200)));
     _FDT((fdt_setprop_cell(fdt, node, "current-speed", 115200)));
-    _FDT((fdt_setprop_cell(fdt, node, "interrupts", d->isairq[0])));
+    _FDT((fdt_setprop_cell(fdt, node, "interrupts", irq)));
     _FDT((fdt_setprop_cell(fdt, node, "interrupt-parent",
                            fdt_get_phandle(fdt, lpc_off))));
 
-- 
2.35.1

[PATCH v3 6/7] isa: Drop unused attributes from ISADevice

[Bernhard Beschow]

Now that the last users of ISADevice::isairq[] have been resolved during the
previous commits, it can be removed for good.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/isa/isa-bus.c     | 13 -------------
 include/hw/isa/isa.h |  2 --
 2 files changed, 15 deletions(-)

diff --git a/hw/isa/isa-bus.c b/hw/isa/isa-bus.c
index af5add6a26..c64a14120b 100644
--- a/hw/isa/isa-bus.c
+++ b/hw/isa/isa-bus.c
@@ -87,11 +87,7 @@ qemu_irq isa_get_irq(ISADevice *dev, unsigned isairq)
 
 void isa_init_irq(ISADevice *dev, qemu_irq *p, unsigned isairq)
 {
-    assert(dev->nirqs < ARRAY_SIZE(dev->isairq));
-    assert(isairq < ISA_NUM_IRQS);
-    dev->isairq[dev->nirqs] = isairq;
     *p = isa_get_irq(dev, isairq);
-    dev->nirqs++;
 }
 
 void isa_connect_gpio_out(ISADevice *isadev, int gpioirq, unsigned isairq)
@@ -150,14 +146,6 @@ int isa_register_portio_list(ISADevice *dev,
     return 0;
 }
 
-static void isa_device_init(Object *obj)
-{
-    ISADevice *dev = ISA_DEVICE(obj);
-
-    dev->isairq[0] = -1;
-    dev->isairq[1] = -1;
-}
-
 ISADevice *isa_new(const char *name)
 {
     return ISA_DEVICE(qdev_new(name));
@@ -244,7 +232,6 @@ static const TypeInfo isa_device_type_info = {
     .name = TYPE_ISA_DEVICE,
     .parent = TYPE_DEVICE,
     .instance_size = sizeof(ISADevice),
-    .instance_init = isa_device_init,
     .abstract = true,
     .class_size = sizeof(ISADeviceClass),
     .class_init = isa_device_class_init,
diff --git a/include/hw/isa/isa.h b/include/hw/isa/isa.h
index d4417b34b6..d80cab5b79 100644
--- a/include/hw/isa/isa.h
+++ b/include/hw/isa/isa.h
@@ -83,8 +83,6 @@ struct ISADevice {
     DeviceState parent_obj;
     /*< public >*/
 
-    int8_t isairq[2];      /* -1 = unassigned */
-    int nirqs;
     int ioport_id;
 };
 
-- 
2.35.1

[PATCH v3 7/7] isa: Inline and remove one-line isa_init_irq()

[Bernhard Beschow]

isa_init_irq() has become a trivial one-line wrapper for isa_get_irq().
It can therefore be removed.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa)
Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt,
isa_ipmi_kcs)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/audio/cs4231a.c     | 2 +-
 hw/audio/gus.c         | 2 +-
 hw/audio/sb16.c        | 2 +-
 hw/block/fdc-isa.c     | 2 +-
 hw/char/parallel.c     | 2 +-
 hw/char/serial-isa.c   | 2 +-
 hw/ide/isa.c           | 2 +-
 hw/input/pckbd.c       | 4 ++--
 hw/ipmi/isa_ipmi_bt.c  | 2 +-
 hw/ipmi/isa_ipmi_kcs.c | 2 +-
 hw/isa/isa-bus.c       | 8 +-------
 hw/isa/piix4.c         | 2 +-
 hw/net/ne2000-isa.c    | 2 +-
 hw/rtc/m48t59-isa.c    | 2 +-
 hw/tpm/tpm_tis_isa.c   | 2 +-
 include/hw/isa/isa.h   | 1 -
 16 files changed, 16 insertions(+), 23 deletions(-)

diff --git a/hw/audio/cs4231a.c b/hw/audio/cs4231a.c
index 7d60ce6f0e..0723e39430 100644
--- a/hw/audio/cs4231a.c
+++ b/hw/audio/cs4231a.c
@@ -677,7 +677,7 @@ static void cs4231a_realizefn (DeviceState *dev, Error **errp)
         return;
     }
 
-    isa_init_irq(d, &s->pic, s->irq);
+    s->pic = isa_get_irq(d, s->irq);
     k = ISADMA_GET_CLASS(s->isa_dma);
     k->register_channel(s->isa_dma, s->dma, cs_dma_read, s);
 
diff --git a/hw/audio/gus.c b/hw/audio/gus.c
index e8719ee117..42f010b671 100644
--- a/hw/audio/gus.c
+++ b/hw/audio/gus.c
@@ -282,7 +282,7 @@ static void gus_realizefn (DeviceState *dev, Error **errp)
     s->emu.himemaddr = s->himem;
     s->emu.gusdatapos = s->emu.himemaddr + 1024 * 1024 + 32;
     s->emu.opaque = s;
-    isa_init_irq (d, &s->pic, s->emu.gusirq);
+    s->pic = isa_get_irq(d, s->emu.gusirq);
 
     AUD_set_active_out (s->voice, 1);
 }
diff --git a/hw/audio/sb16.c b/hw/audio/sb16.c
index 60f1f75e3a..2215386ddb 100644
--- a/hw/audio/sb16.c
+++ b/hw/audio/sb16.c
@@ -1408,7 +1408,7 @@ static void sb16_realizefn (DeviceState *dev, Error **errp)
         return;
     }
 
-    isa_init_irq (isadev, &s->pic, s->irq);
+    s->pic = isa_get_irq(isadev, s->irq);
 
     s->mixer_regs[0x80] = magic_of_irq (s->irq);
     s->mixer_regs[0x81] = (1 << s->dma) | (1 << s->hdma);
diff --git a/hw/block/fdc-isa.c b/hw/block/fdc-isa.c
index ab663dce93..fa20450747 100644
--- a/hw/block/fdc-isa.c
+++ b/hw/block/fdc-isa.c
@@ -94,7 +94,7 @@ static void isabus_fdc_realize(DeviceState *dev, Error **errp)
                              isa->iobase, fdc_portio_list, fdctrl,
                              "fdc");
 
-    isa_init_irq(isadev, &fdctrl->irq, isa->irq);
+    fdctrl->irq = isa_get_irq(isadev, isa->irq);
     fdctrl->dma_chann = isa->dma;
     if (fdctrl->dma_chann != -1) {
         IsaDmaClass *k;
diff --git a/hw/char/parallel.c b/hw/char/parallel.c
index b45e67bfbb..adb9bd9be3 100644
--- a/hw/char/parallel.c
+++ b/hw/char/parallel.c
@@ -553,7 +553,7 @@ static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
     index++;
 
     base = isa->iobase;
-    isa_init_irq(isadev, &s->irq, isa->isairq);
+    s->irq = isa_get_irq(isadev, isa->isairq);
     qemu_register_reset(parallel_reset, s);
 
     qemu_chr_fe_set_handlers(&s->chr, parallel_can_receive, NULL,
diff --git a/hw/char/serial-isa.c b/hw/char/serial-isa.c
index 1b8b303079..7a7ed239cd 100644
--- a/hw/char/serial-isa.c
+++ b/hw/char/serial-isa.c
@@ -75,7 +75,7 @@ static void serial_isa_realizefn(DeviceState *dev, Error **errp)
     }
     index++;
 
-    isa_init_irq(isadev, &s->irq, isa->isairq);
+    s->irq = isa_get_irq(isadev, isa->isairq);
     qdev_realize(DEVICE(s), NULL, errp);
     qdev_set_legacy_instance_id(dev, isa->iobase, 3);
 
diff --git a/hw/ide/isa.c b/hw/ide/isa.c
index 24bbde24c2..8bedbd13f1 100644
--- a/hw/ide/isa.c
+++ b/hw/ide/isa.c
@@ -75,7 +75,7 @@ static void isa_ide_realizefn(DeviceState *dev, Error **errp)
 
     ide_bus_init(&s->bus, sizeof(s->bus), dev, 0, 2);
     ide_init_ioport(&s->bus, isadev, s->iobase, s->iobase2);
-    isa_init_irq(isadev, &s->irq, s->isairq);
+    s->irq = isa_get_irq(isadev, s->isairq);
     ide_init2(&s->bus, s->irq);
     vmstate_register(VMSTATE_IF(dev), 0, &vmstate_ide_isa, s);
     ide_register_restart_cb(&s->bus);
diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c
index eb77e12f6f..1773db0d25 100644
--- a/hw/input/pckbd.c
+++ b/hw/input/pckbd.c
@@ -749,8 +749,8 @@ static void i8042_realizefn(DeviceState *dev, Error **errp)
         return;
     }
 
-    isa_init_irq(isadev, &s->irq_kbd, isa_s->kbd_irq);
-    isa_init_irq(isadev, &s->irq_mouse, isa_s->mouse_irq);
+    s->irq_kbd = isa_get_irq(isadev, isa_s->kbd_irq);
+    s->irq_mouse = isa_get_irq(isadev, isa_s->mouse_irq);
 
     isa_register_ioport(isadev, isa_s->io + 0, 0x60);
     isa_register_ioport(isadev, isa_s->io + 1, 0x64);
diff --git a/hw/ipmi/isa_ipmi_bt.c b/hw/ipmi/isa_ipmi_bt.c
index 02625eb94e..88aa734e9e 100644
--- a/hw/ipmi/isa_ipmi_bt.c
+++ b/hw/ipmi/isa_ipmi_bt.c
@@ -92,7 +92,7 @@ static void isa_ipmi_bt_realize(DeviceState *dev, Error **errp)
     }
 
     if (iib->isairq > 0) {
-        isa_init_irq(isadev, &iib->irq, iib->isairq);
+        iib->irq = isa_get_irq(isadev, iib->isairq);
         iib->bt.use_irq = 1;
         iib->bt.raise_irq = isa_ipmi_bt_raise_irq;
         iib->bt.lower_irq = isa_ipmi_bt_lower_irq;
diff --git a/hw/ipmi/isa_ipmi_kcs.c b/hw/ipmi/isa_ipmi_kcs.c
index 3b23ad08b3..afabb95ebe 100644
--- a/hw/ipmi/isa_ipmi_kcs.c
+++ b/hw/ipmi/isa_ipmi_kcs.c
@@ -91,7 +91,7 @@ static void ipmi_isa_realize(DeviceState *dev, Error **errp)
     }
 
     if (iik->isairq > 0) {
-        isa_init_irq(isadev, &iik->irq, iik->isairq);
+        iik->irq = isa_get_irq(isadev, iik->isairq);
         iik->kcs.use_irq = 1;
         iik->kcs.raise_irq = isa_ipmi_kcs_raise_irq;
         iik->kcs.lower_irq = isa_ipmi_kcs_lower_irq;
diff --git a/hw/isa/isa-bus.c b/hw/isa/isa-bus.c
index c64a14120b..0ad1c5fd65 100644
--- a/hw/isa/isa-bus.c
+++ b/hw/isa/isa-bus.c
@@ -85,15 +85,9 @@ qemu_irq isa_get_irq(ISADevice *dev, unsigned isairq)
     return isabus->irqs[isairq];
 }
 
-void isa_init_irq(ISADevice *dev, qemu_irq *p, unsigned isairq)
-{
-    *p = isa_get_irq(dev, isairq);
-}
-
 void isa_connect_gpio_out(ISADevice *isadev, int gpioirq, unsigned isairq)
 {
-    qemu_irq irq;
-    isa_init_irq(isadev, &irq, isairq);
+    qemu_irq irq = isa_get_irq(isadev, isairq);
     qdev_connect_gpio_out(DEVICE(isadev), gpioirq, irq);
 }
 
diff --git a/hw/isa/piix4.c b/hw/isa/piix4.c
index cb291d121c..0fd6756dcf 100644
--- a/hw/isa/piix4.c
+++ b/hw/isa/piix4.c
@@ -197,7 +197,7 @@ static void piix4_realize(PCIDevice *dev, Error **errp)
     if (!qdev_realize(DEVICE(&s->rtc), BUS(isa_bus), errp)) {
         return;
     }
-    isa_init_irq(ISA_DEVICE(&s->rtc), &s->rtc.irq, s->rtc.isairq);
+    s->rtc.irq = isa_get_irq(ISA_DEVICE(&s->rtc), s->rtc.isairq);
 
     piix4_dev = dev;
 }
diff --git a/hw/net/ne2000-isa.c b/hw/net/ne2000-isa.c
index dd6f6e34d3..6ced6775ff 100644
--- a/hw/net/ne2000-isa.c
+++ b/hw/net/ne2000-isa.c
@@ -68,7 +68,7 @@ static void isa_ne2000_realizefn(DeviceState *dev, Error **errp)
     ne2000_setup_io(s, DEVICE(isadev), 0x20);
     isa_register_ioport(isadev, &s->io, isa->iobase);
 
-    isa_init_irq(isadev, &s->irq, isa->isairq);
+    s->irq = isa_get_irq(isadev, isa->isairq);
 
     qemu_macaddr_default_if_unset(&s->c.macaddr);
     ne2000_reset(s);
diff --git a/hw/rtc/m48t59-isa.c b/hw/rtc/m48t59-isa.c
index e9086eada4..e61f7ec370 100644
--- a/hw/rtc/m48t59-isa.c
+++ b/hw/rtc/m48t59-isa.c
@@ -106,7 +106,7 @@ static void m48t59_isa_realize(DeviceState *dev, Error **errp)
 
     s->model = u->info.model;
     s->size = u->info.size;
-    isa_init_irq(isadev, &s->IRQ, d->isairq);
+    s->IRQ = isa_get_irq(isadev, d->isairq);
     m48t59_realize_common(s, errp);
     memory_region_init_io(&d->io, OBJECT(dev), &m48t59_io_ops, s, "m48t59", 4);
     if (d->io_base != 0) {
diff --git a/hw/tpm/tpm_tis_isa.c b/hw/tpm/tpm_tis_isa.c
index 10d8a14f19..3477afd735 100644
--- a/hw/tpm/tpm_tis_isa.c
+++ b/hw/tpm/tpm_tis_isa.c
@@ -127,7 +127,7 @@ static void tpm_tis_isa_realizefn(DeviceState *dev, Error **errp)
         return;
     }
 
-    isa_init_irq(ISA_DEVICE(dev), &s->irq, s->irq_num);
+    s->irq = isa_get_irq(ISA_DEVICE(dev), s->irq_num);
 
     memory_region_add_subregion(isa_address_space(ISA_DEVICE(dev)),
                                 TPM_TIS_ADDR_BASE, &s->mmio);
diff --git a/include/hw/isa/isa.h b/include/hw/isa/isa.h
index d80cab5b79..034d706ba1 100644
--- a/include/hw/isa/isa.h
+++ b/include/hw/isa/isa.h
@@ -90,7 +90,6 @@ ISABus *isa_bus_new(DeviceState *dev, MemoryRegion *address_space,
                     MemoryRegion *address_space_io, Error **errp);
 void isa_bus_irqs(ISABus *bus, qemu_irq *irqs);
 qemu_irq isa_get_irq(ISADevice *dev, unsigned isairq);
-void isa_init_irq(ISADevice *dev, qemu_irq *p, unsigned isairq);
 void isa_connect_gpio_out(ISADevice *isadev, int gpioirq, unsigned isairq);
 void isa_bus_dma(ISABus *bus, IsaDma *dma8, IsaDma *dma16);
 IsaDma *isa_get_dma(ISABus *bus, int nchan);
-- 
2.35.1

Re: [PATCH v3 7/7] isa: Inline and remove one-line isa_init_irq()

[Gerd Hoffmann]

On Tue, Mar 01, 2022 at 11:00:37PM +0100, Bernhard Beschow wrote:
> isa_init_irq() has become a trivial one-line wrapper for isa_get_irq().
> It can therefore be removed.
> 
> Signed-off-by: Bernhard Beschow <shentey@gmail.com>
> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa)
> Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt,
> isa_ipmi_kcs)
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Acked-by: Gerd Hoffmann <kraxel@redhat.com>

Re: [PATCH v3 0/7] isa: Resolve unneeded IRQ attributes from ISADevice

[Philippe Mathieu-Daudé]

On 1/3/22 23:00, Bernhard Beschow wrote:

> The IRQ attributes are mostly used for printing ('info qtree') and there is one
> user, hw/ppc/pnv, to use the attributes directly. As it turns out, the printing
> is redundant if the IRQ numbers are exposed as QOM properties and hw/ppc/pnv
> can be easily ported away.
> 
> The patch series is structured as follows: Patch 1-3 QOM'ify the last devices
> which rely on printing their IRQ numbers via the ISADevice attributes. Patch
> 4 and 5 remove the last users of the ISADevice attributes such that they can be
> removed in patch 6. The remainder of the patch series is cleanup.
> 
> Patch 6 turns isa_init_irq() into a trivial wrapper for isa_get_irq(). That is,
> the former function becomes redundant. All users are therefore converted to use
> isa_get_irq() directly. Finally, the last patch removes the now unused
> isa_init_irq().
> 
> 
> Bernhard Beschow (7):
>    hw/rtc/mc146818rtc: QOM'ify IRQ number
>    hw/rtc/m48t59-isa: QOM'ify IRQ number
>    hw/input/pckbd: QOM'ify IRQ numbers
>    hw/isa/isa-bus: Remove isabus_dev_print()
>    hw/ppc/pnv: Determine ns16550's IRQ number from QOM property
>    isa: Drop unused attributes from ISADevice
>    isa: Inline and remove one-line isa_init_irq()
> 
>   hw/audio/cs4231a.c           |  2 +-
>   hw/audio/gus.c               |  2 +-
>   hw/audio/sb16.c              |  2 +-
>   hw/block/fdc-isa.c           |  2 +-
>   hw/char/parallel.c           |  2 +-
>   hw/char/serial-isa.c         |  2 +-
>   hw/ide/isa.c                 |  2 +-
>   hw/input/pckbd.c             | 26 +++++++++++++++++++++----
>   hw/ipmi/isa_ipmi_bt.c        |  2 +-
>   hw/ipmi/isa_ipmi_kcs.c       |  2 +-
>   hw/isa/isa-bus.c             | 37 +-----------------------------------
>   hw/isa/piix4.c               |  2 +-
>   hw/net/ne2000-isa.c          |  2 +-
>   hw/ppc/pnv.c                 |  5 ++++-
>   hw/rtc/m48t59-isa.c          |  9 ++++++++-
>   hw/rtc/mc146818rtc.c         | 13 +++++++++++--
>   hw/tpm/tpm_tis_isa.c         |  2 +-
>   include/hw/isa/isa.h         |  3 ---
>   include/hw/rtc/mc146818rtc.h |  1 +
>   tests/qemu-iotests/172.out   | 26 -------------------------
>   20 files changed, 59 insertions(+), 85 deletions(-)
> 

Please avoid posting 2 series going in different directions but touching
the same files, and expect the same person to take them both and resolve
resulting conflicts. Post one, then the second one based on the previous
one (and so on if multiple steps). Anyway, for now I adapted this series
on top of your "malta: Fix PCI IRQ levels" series and queued to mips.

Thanks,

Phil.

Re: [PATCH v3 0/7] isa: Resolve unneeded IRQ attributes from ISADevice

[Bernhard Beschow]

Am 7. März 2022 00:34:27 UTC schrieb "Philippe Mathieu-Daudé" <philippe.mathieu.daude@gmail.com>:
>On 1/3/22 23:00, Bernhard Beschow wrote:
>
>> The IRQ attributes are mostly used for printing ('info qtree') and there is one
>> user, hw/ppc/pnv, to use the attributes directly. As it turns out, the printing
>> is redundant if the IRQ numbers are exposed as QOM properties and hw/ppc/pnv
>> can be easily ported away.
>> 
>> The patch series is structured as follows: Patch 1-3 QOM'ify the last devices
>> which rely on printing their IRQ numbers via the ISADevice attributes. Patch
>> 4 and 5 remove the last users of the ISADevice attributes such that they can be
>> removed in patch 6. The remainder of the patch series is cleanup.
>> 
>> Patch 6 turns isa_init_irq() into a trivial wrapper for isa_get_irq(). That is,
>> the former function becomes redundant. All users are therefore converted to use
>> isa_get_irq() directly. Finally, the last patch removes the now unused
>> isa_init_irq().
>> 
>> 
>> Bernhard Beschow (7):
>>    hw/rtc/mc146818rtc: QOM'ify IRQ number
>>    hw/rtc/m48t59-isa: QOM'ify IRQ number
>>    hw/input/pckbd: QOM'ify IRQ numbers
>>    hw/isa/isa-bus: Remove isabus_dev_print()
>>    hw/ppc/pnv: Determine ns16550's IRQ number from QOM property
>>    isa: Drop unused attributes from ISADevice
>>    isa: Inline and remove one-line isa_init_irq()
>> 
>>   hw/audio/cs4231a.c           |  2 +-
>>   hw/audio/gus.c               |  2 +-
>>   hw/audio/sb16.c              |  2 +-
>>   hw/block/fdc-isa.c           |  2 +-
>>   hw/char/parallel.c           |  2 +-
>>   hw/char/serial-isa.c         |  2 +-
>>   hw/ide/isa.c                 |  2 +-
>>   hw/input/pckbd.c             | 26 +++++++++++++++++++++----
>>   hw/ipmi/isa_ipmi_bt.c        |  2 +-
>>   hw/ipmi/isa_ipmi_kcs.c       |  2 +-
>>   hw/isa/isa-bus.c             | 37 +-----------------------------------
>>   hw/isa/piix4.c               |  2 +-
>>   hw/net/ne2000-isa.c          |  2 +-
>>   hw/ppc/pnv.c                 |  5 ++++-
>>   hw/rtc/m48t59-isa.c          |  9 ++++++++-
>>   hw/rtc/mc146818rtc.c         | 13 +++++++++++--
>>   hw/tpm/tpm_tis_isa.c         |  2 +-
>>   include/hw/isa/isa.h         |  3 ---
>>   include/hw/rtc/mc146818rtc.h |  1 +
>>   tests/qemu-iotests/172.out   | 26 -------------------------
>>   20 files changed, 59 insertions(+), 85 deletions(-)
>> 
>
>Please avoid posting 2 series going in different directions but touching
>the same files, and expect the same person to take them both and resolve
>resulting conflicts. Post one, then the second one based on the previous
>one (and so on if multiple steps). Anyway, for now I adapted this series
>on top of your "malta: Fix PCI IRQ levels" series and queued to mips.

Hi Phil,

I'm sorry to have caused you issues with my two patch series. In hindsight I should have communicated the merge conflict beforehand. I didn't because I considered it a special case where two logically independent series happened to be created by the same person. Now I know that communicating it earlier had allowed us to find a solution beforehand. After all, I'm more than happy helping out to accellerate integration of my patches.

Anyway, thanks for having picked this up and also thanks a lot for your steady stream of motivating review comments!

Best regards,
Bernhard

>
>Thanks,
>
>Phil.