* [PATCH v6 0/5] Add Aspeed AST2600 soc display support
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
v6:
Remove some unnecessary reset patch.
Refine patch format.
Add detail explain of SOC display reset bits.
v5:
Add lost reset define.
v4:
Add necessary reset control for ast2600.
Add chip caps for futher use.
These code are test on AST2500 and AST2600 by below steps.
1. Add below config to turn VT and LOGO on.
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
2. The Linux logo will be shown on the screen, when the BMC boot in Linux.
v3:
Refine the patch for clear separate purpose.
Skip to send devicetree patch
v2:
Remove some unnecessary patch.
Refine for reviwer request.
v1:
First add patch.
Joel Stanley (2):
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable GFX device
Tommy Haung (3):
drm/aspeed: Update INTR_STS handling
drm/aspeed: Add AST2600 chip support
ARM: dtsi: aspeed: Modified gfx reset control
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 ++++++++++++++-
4 files changed, 44 insertions(+), 1 deletion(-)
--
2.17.1
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 0/5] Add Aspeed AST2600 soc display support
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
v6:
Remove some unnecessary reset patch.
Refine patch format.
Add detail explain of SOC display reset bits.
v5:
Add lost reset define.
v4:
Add necessary reset control for ast2600.
Add chip caps for futher use.
These code are test on AST2500 and AST2600 by below steps.
1. Add below config to turn VT and LOGO on.
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
2. The Linux logo will be shown on the screen, when the BMC boot in Linux.
v3:
Refine the patch for clear separate purpose.
Skip to send devicetree patch
v2:
Remove some unnecessary patch.
Refine for reviwer request.
v1:
First add patch.
Joel Stanley (2):
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable GFX device
Tommy Haung (3):
drm/aspeed: Update INTR_STS handling
drm/aspeed: Add AST2600 chip support
ARM: dtsi: aspeed: Modified gfx reset control
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 ++++++++++++++-
4 files changed, 44 insertions(+), 1 deletion(-)
--
2.17.1
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 0/5] Add Aspeed AST2600 soc display support
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
v6:
Remove some unnecessary reset patch.
Refine patch format.
Add detail explain of SOC display reset bits.
v5:
Add lost reset define.
v4:
Add necessary reset control for ast2600.
Add chip caps for futher use.
These code are test on AST2500 and AST2600 by below steps.
1. Add below config to turn VT and LOGO on.
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
2. The Linux logo will be shown on the screen, when the BMC boot in Linux.
v3:
Refine the patch for clear separate purpose.
Skip to send devicetree patch
v2:
Remove some unnecessary patch.
Refine for reviwer request.
v1:
First add patch.
Joel Stanley (2):
ARM: dts: aspeed: Add GFX node to AST2600
ARM: dts: aspeed: ast2600-evb: Enable GFX device
Tommy Haung (3):
drm/aspeed: Update INTR_STS handling
drm/aspeed: Add AST2600 chip support
ARM: dtsi: aspeed: Modified gfx reset control
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 ++++++++++++++-
4 files changed, 44 insertions(+), 1 deletion(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v6 1/5] ARM: dts: aspeed: Add GFX node to AST2600
2022-03-02 2:49 ` Tommy Haung
(?)
@ 2022-03-02 2:49 ` Tommy Haung
-1 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
From: Joel Stanley <joel@jms.id.au>
The GFX device is present in the AST2600 SoC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e38c3742761b 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -351,6 +351,17 @@
quality = <100>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_GRAPHICS>;
+ syscon = <&syscon>;
+ status = "disabled";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 1/5] ARM: dts: aspeed: Add GFX node to AST2600
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
From: Joel Stanley <joel@jms.id.au>
The GFX device is present in the AST2600 SoC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e38c3742761b 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -351,6 +351,17 @@
quality = <100>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_GRAPHICS>;
+ syscon = <&syscon>;
+ status = "disabled";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 1/5] ARM: dts: aspeed: Add GFX node to AST2600
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
From: Joel Stanley <joel@jms.id.au>
The GFX device is present in the AST2600 SoC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e38c3742761b 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -351,6 +351,17 @@
quality = <100>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_GRAPHICS>;
+ syscon = <&syscon>;
+ status = "disabled";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 2/5] ARM: dts: aspeed: ast2600-evb: Enable GFX device
2022-03-02 2:49 ` Tommy Haung
(?)
@ 2022-03-02 2:49 ` Tommy Haung
-1 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
From: Joel Stanley <joel@jms.id.au>
Enable the GFX device with a framebuffer memory region.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..e223dad2abd0 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -23,6 +23,19 @@
reg = <0x80000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
vcc_sdhci0: regulator-vcc-sdhci0 {
compatible = "regulator-fixed";
regulator-name = "SDHCI0 Vcc";
@@ -300,3 +313,8 @@
vqmmc-supply = <&vccq_sdhci1>;
clk-phase-sd-hs = <7>, <200>;
};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 2/5] ARM: dts: aspeed: ast2600-evb: Enable GFX device
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
From: Joel Stanley <joel@jms.id.au>
Enable the GFX device with a framebuffer memory region.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..e223dad2abd0 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -23,6 +23,19 @@
reg = <0x80000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
vcc_sdhci0: regulator-vcc-sdhci0 {
compatible = "regulator-fixed";
regulator-name = "SDHCI0 Vcc";
@@ -300,3 +313,8 @@
vqmmc-supply = <&vccq_sdhci1>;
clk-phase-sd-hs = <7>, <200>;
};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 2/5] ARM: dts: aspeed: ast2600-evb: Enable GFX device
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
From: Joel Stanley <joel@jms.id.au>
Enable the GFX device with a framebuffer memory region.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..e223dad2abd0 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -23,6 +23,19 @@
reg = <0x80000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
vcc_sdhci0: regulator-vcc-sdhci0 {
compatible = "regulator-fixed";
regulator-name = "SDHCI0 Vcc";
@@ -300,3 +313,8 @@
vqmmc-supply = <&vccq_sdhci1>;
clk-phase-sd-hs = <7>, <200>;
};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 3/5] drm/aspeed: Update INTR_STS handling
2022-03-02 2:49 ` Tommy Haung
(?)
@ 2022-03-02 2:49 ` Tommy Haung
-1 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Add interrupt clear register define for further chip support.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 96501152bafa..4e6a442c3886 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -12,6 +12,7 @@ struct aspeed_gfx {
struct regmap *scu;
u32 dac_reg;
+ u32 int_clr_reg;
u32 vga_scratch_reg;
u32 throd_val;
u32 scan_line_max;
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index b53fee6f1c17..d4b56b3c7597 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -60,6 +60,7 @@
struct aspeed_gfx_config {
u32 dac_reg; /* DAC register in SCU */
+ u32 int_clear_reg; /* Interrupt clear register */
u32 vga_scratch_reg; /* VGA scratch register in SCU */
u32 throd_val; /* Default Threshold Seting */
u32 scan_line_max; /* Max memory size of one scan line */
@@ -67,6 +68,7 @@ struct aspeed_gfx_config {
static const struct aspeed_gfx_config ast2400_config = {
.dac_reg = 0x2c,
+ .int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
.scan_line_max = 64,
@@ -74,6 +76,7 @@ static const struct aspeed_gfx_config ast2400_config = {
static const struct aspeed_gfx_config ast2500_config = {
.dac_reg = 0x2c,
+ .int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
.scan_line_max = 128,
@@ -119,7 +122,7 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
drm_crtc_handle_vblank(&priv->pipe.crtc);
- writel(reg, priv->base + CRT_CTRL1);
+ writel(reg, priv->base + priv->int_clr_reg);
return IRQ_HANDLED;
}
@@ -147,6 +150,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
config = match->data;
priv->dac_reg = config->dac_reg;
+ priv->int_clr_reg = config->int_clear_reg;
priv->vga_scratch_reg = config->vga_scratch_reg;
priv->throd_val = config->throd_val;
priv->scan_line_max = config->scan_line_max;
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 3/5] drm/aspeed: Update INTR_STS handling
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Add interrupt clear register define for further chip support.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 96501152bafa..4e6a442c3886 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -12,6 +12,7 @@ struct aspeed_gfx {
struct regmap *scu;
u32 dac_reg;
+ u32 int_clr_reg;
u32 vga_scratch_reg;
u32 throd_val;
u32 scan_line_max;
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index b53fee6f1c17..d4b56b3c7597 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -60,6 +60,7 @@
struct aspeed_gfx_config {
u32 dac_reg; /* DAC register in SCU */
+ u32 int_clear_reg; /* Interrupt clear register */
u32 vga_scratch_reg; /* VGA scratch register in SCU */
u32 throd_val; /* Default Threshold Seting */
u32 scan_line_max; /* Max memory size of one scan line */
@@ -67,6 +68,7 @@ struct aspeed_gfx_config {
static const struct aspeed_gfx_config ast2400_config = {
.dac_reg = 0x2c,
+ .int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
.scan_line_max = 64,
@@ -74,6 +76,7 @@ static const struct aspeed_gfx_config ast2400_config = {
static const struct aspeed_gfx_config ast2500_config = {
.dac_reg = 0x2c,
+ .int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
.scan_line_max = 128,
@@ -119,7 +122,7 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
drm_crtc_handle_vblank(&priv->pipe.crtc);
- writel(reg, priv->base + CRT_CTRL1);
+ writel(reg, priv->base + priv->int_clr_reg);
return IRQ_HANDLED;
}
@@ -147,6 +150,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
config = match->data;
priv->dac_reg = config->dac_reg;
+ priv->int_clr_reg = config->int_clear_reg;
priv->vga_scratch_reg = config->vga_scratch_reg;
priv->throd_val = config->throd_val;
priv->scan_line_max = config->scan_line_max;
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 3/5] drm/aspeed: Update INTR_STS handling
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Add interrupt clear register define for further chip support.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 96501152bafa..4e6a442c3886 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -12,6 +12,7 @@ struct aspeed_gfx {
struct regmap *scu;
u32 dac_reg;
+ u32 int_clr_reg;
u32 vga_scratch_reg;
u32 throd_val;
u32 scan_line_max;
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index b53fee6f1c17..d4b56b3c7597 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -60,6 +60,7 @@
struct aspeed_gfx_config {
u32 dac_reg; /* DAC register in SCU */
+ u32 int_clear_reg; /* Interrupt clear register */
u32 vga_scratch_reg; /* VGA scratch register in SCU */
u32 throd_val; /* Default Threshold Seting */
u32 scan_line_max; /* Max memory size of one scan line */
@@ -67,6 +68,7 @@ struct aspeed_gfx_config {
static const struct aspeed_gfx_config ast2400_config = {
.dac_reg = 0x2c,
+ .int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
.scan_line_max = 64,
@@ -74,6 +76,7 @@ static const struct aspeed_gfx_config ast2400_config = {
static const struct aspeed_gfx_config ast2500_config = {
.dac_reg = 0x2c,
+ .int_clear_reg = 0x60,
.vga_scratch_reg = 0x50,
.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
.scan_line_max = 128,
@@ -119,7 +122,7 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
if (reg & CRT_CTRL_VERTICAL_INTR_STS) {
drm_crtc_handle_vblank(&priv->pipe.crtc);
- writel(reg, priv->base + CRT_CTRL1);
+ writel(reg, priv->base + priv->int_clr_reg);
return IRQ_HANDLED;
}
@@ -147,6 +150,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
config = match->data;
priv->dac_reg = config->dac_reg;
+ priv->int_clr_reg = config->int_clear_reg;
priv->vga_scratch_reg = config->vga_scratch_reg;
priv->throd_val = config->throd_val;
priv->scan_line_max = config->scan_line_max;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support
2022-03-02 2:49 ` Tommy Haung
(?)
@ 2022-03-02 2:49 ` Tommy Haung
-1 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Add AST2600 chip support and setting.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d4b56b3c7597..d10246b1d1c2 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -82,9 +82,18 @@ static const struct aspeed_gfx_config ast2500_config = {
.scan_line_max = 128,
};
+static const struct aspeed_gfx_config ast2600_config = {
+ .dac_reg = 0xc0,
+ .int_clear_reg = 0x68,
+ .vga_scratch_reg = 0x50,
+ .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+ .scan_line_max = 128,
+};
+
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+ { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Add AST2600 chip support and setting.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d4b56b3c7597..d10246b1d1c2 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -82,9 +82,18 @@ static const struct aspeed_gfx_config ast2500_config = {
.scan_line_max = 128,
};
+static const struct aspeed_gfx_config ast2600_config = {
+ .dac_reg = 0xc0,
+ .int_clear_reg = 0x68,
+ .vga_scratch_reg = 0x50,
+ .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+ .scan_line_max = 128,
+};
+
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+ { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Add AST2600 chip support and setting.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d4b56b3c7597..d10246b1d1c2 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -82,9 +82,18 @@ static const struct aspeed_gfx_config ast2500_config = {
.scan_line_max = 128,
};
+static const struct aspeed_gfx_config ast2600_config = {
+ .dac_reg = 0xc0,
+ .int_clear_reg = 0x68,
+ .vga_scratch_reg = 0x50,
+ .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
+ .scan_line_max = 128,
+};
+
static const struct of_device_id aspeed_gfx_match[] = {
{ .compatible = "aspeed,ast2400-gfx", .data = &ast2400_config },
{ .compatible = "aspeed,ast2500-gfx", .data = &ast2500_config },
+ { .compatible = "aspeed,ast2600-gfx", .data = &ast2600_config },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_gfx_match);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control
2022-03-02 2:49 ` Tommy Haung
(?)
@ 2022-03-02 2:49 ` Tommy Haung
-1 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Remove the ast2500-gfx from aspeed-g6.dtsi.
In the AST2600, the ASPEED_RESET_CRT1 is replaced by
ASPEED_RESET_GRAPHICS. This is no differnce between these two reset
behavior but reigster location is changed. The HW controller states
and FW programming resgiter will be reset by CRT reset controller bit
(SCU040[13]). And another part HW controller will be reset by
Graphics controller bit (SCU040[26]). These two reset bit need be
de-assert then the SOC display will be active.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index e38c3742761b..7cc99bc68558 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -352,7 +352,7 @@
};
gfx: display@1e6e6000 {
- compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ compatible = "aspeed,ast2600-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
reg-io-width = <4>;
clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Remove the ast2500-gfx from aspeed-g6.dtsi.
In the AST2600, the ASPEED_RESET_CRT1 is replaced by
ASPEED_RESET_GRAPHICS. This is no differnce between these two reset
behavior but reigster location is changed. The HW controller states
and FW programming resgiter will be reset by CRT reset controller bit
(SCU040[13]). And another part HW controller will be reset by
Graphics controller bit (SCU040[26]). These two reset bit need be
de-assert then the SOC display will be active.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index e38c3742761b..7cc99bc68558 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -352,7 +352,7 @@
};
gfx: display@1e6e6000 {
- compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ compatible = "aspeed,ast2600-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
reg-io-width = <4>;
clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
--
2.17.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control
@ 2022-03-02 2:49 ` Tommy Haung
0 siblings, 0 replies; 24+ messages in thread
From: Tommy Haung @ 2022-03-02 2:49 UTC (permalink / raw)
To: joel, airlied, daniel, robh+dt, andrew, linux-aspeed, dri-devel,
devicetree, linux-arm-kernel, linux-kernel
Cc: BMC-SW
Remove the ast2500-gfx from aspeed-g6.dtsi.
In the AST2600, the ASPEED_RESET_CRT1 is replaced by
ASPEED_RESET_GRAPHICS. This is no differnce between these two reset
behavior but reigster location is changed. The HW controller states
and FW programming resgiter will be reset by CRT reset controller bit
(SCU040[13]). And another part HW controller will be reset by
Graphics controller bit (SCU040[26]). These two reset bit need be
de-assert then the SOC display will be active.
Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index e38c3742761b..7cc99bc68558 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -352,7 +352,7 @@
};
gfx: display@1e6e6000 {
- compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ compatible = "aspeed,ast2600-gfx", "syscon";
reg = <0x1e6e6000 0x1000>;
reg-io-width = <4>;
clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control
2022-03-02 2:49 ` Tommy Haung
(?)
@ 2022-03-02 3:08 ` Joel Stanley
-1 siblings, 0 replies; 24+ messages in thread
From: Joel Stanley @ 2022-03-02 3:08 UTC (permalink / raw)
To: Tommy Haung
Cc: David Airlie, Daniel Vetter, Rob Herring, Andrew Jeffery,
linux-aspeed, open list:DRM DRIVERS, devicetree, Linux ARM,
Linux Kernel Mailing List, BMC-SW
On Wed, 2 Mar 2022 at 02:50, Tommy Haung <tommy_huang@aspeedtech.com> wrote:
>
> Remove the ast2500-gfx from aspeed-g6.dtsi.
> In the AST2600, the ASPEED_RESET_CRT1 is replaced by
> ASPEED_RESET_GRAPHICS. This is no differnce between these two reset
> behavior but reigster location is changed. The HW controller states
> and FW programming resgiter will be reset by CRT reset controller bit
> (SCU040[13]). And another part HW controller will be reset by
> Graphics controller bit (SCU040[26]). These two reset bit need be
> de-assert then the SOC display will be active.
>
> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
You don't need this patch; the change should be part of the patch that
introduces the node. I'll fix that up when applying.
> ---
> arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index e38c3742761b..7cc99bc68558 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -352,7 +352,7 @@
> };
>
> gfx: display@1e6e6000 {
> - compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
> + compatible = "aspeed,ast2600-gfx", "syscon";
> reg = <0x1e6e6000 0x1000>;
> reg-io-width = <4>;
> clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control
@ 2022-03-02 3:08 ` Joel Stanley
0 siblings, 0 replies; 24+ messages in thread
From: Joel Stanley @ 2022-03-02 3:08 UTC (permalink / raw)
To: Tommy Haung
Cc: devicetree, linux-aspeed, BMC-SW, David Airlie,
Linux Kernel Mailing List, open list:DRM DRIVERS, Andrew Jeffery,
Rob Herring, Linux ARM
On Wed, 2 Mar 2022 at 02:50, Tommy Haung <tommy_huang@aspeedtech.com> wrote:
>
> Remove the ast2500-gfx from aspeed-g6.dtsi.
> In the AST2600, the ASPEED_RESET_CRT1 is replaced by
> ASPEED_RESET_GRAPHICS. This is no differnce between these two reset
> behavior but reigster location is changed. The HW controller states
> and FW programming resgiter will be reset by CRT reset controller bit
> (SCU040[13]). And another part HW controller will be reset by
> Graphics controller bit (SCU040[26]). These two reset bit need be
> de-assert then the SOC display will be active.
>
> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
You don't need this patch; the change should be part of the patch that
introduces the node. I'll fix that up when applying.
> ---
> arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index e38c3742761b..7cc99bc68558 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -352,7 +352,7 @@
> };
>
> gfx: display@1e6e6000 {
> - compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
> + compatible = "aspeed,ast2600-gfx", "syscon";
> reg = <0x1e6e6000 0x1000>;
> reg-io-width = <4>;
> clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control
@ 2022-03-02 3:08 ` Joel Stanley
0 siblings, 0 replies; 24+ messages in thread
From: Joel Stanley @ 2022-03-02 3:08 UTC (permalink / raw)
To: Tommy Haung
Cc: David Airlie, Daniel Vetter, Rob Herring, Andrew Jeffery,
linux-aspeed, open list:DRM DRIVERS, devicetree, Linux ARM,
Linux Kernel Mailing List, BMC-SW
On Wed, 2 Mar 2022 at 02:50, Tommy Haung <tommy_huang@aspeedtech.com> wrote:
>
> Remove the ast2500-gfx from aspeed-g6.dtsi.
> In the AST2600, the ASPEED_RESET_CRT1 is replaced by
> ASPEED_RESET_GRAPHICS. This is no differnce between these two reset
> behavior but reigster location is changed. The HW controller states
> and FW programming resgiter will be reset by CRT reset controller bit
> (SCU040[13]). And another part HW controller will be reset by
> Graphics controller bit (SCU040[26]). These two reset bit need be
> de-assert then the SOC display will be active.
>
> Signed-off-by: Tommy Haung <tommy_huang@aspeedtech.com>
You don't need this patch; the change should be part of the patch that
introduces the node. I'll fix that up when applying.
> ---
> arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index e38c3742761b..7cc99bc68558 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -352,7 +352,7 @@
> };
>
> gfx: display@1e6e6000 {
> - compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
> + compatible = "aspeed,ast2600-gfx", "syscon";
> reg = <0x1e6e6000 0x1000>;
> reg-io-width = <4>;
> clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/5] Add Aspeed AST2600 soc display support
2022-03-02 2:49 ` Tommy Haung
(?)
@ 2022-03-02 3:09 ` Joel Stanley
-1 siblings, 0 replies; 24+ messages in thread
From: Joel Stanley @ 2022-03-02 3:09 UTC (permalink / raw)
To: Tommy Haung
Cc: David Airlie, Daniel Vetter, Rob Herring, Andrew Jeffery,
linux-aspeed, open list:DRM DRIVERS, devicetree, Linux ARM,
Linux Kernel Mailing List, BMC-SW
On Wed, 2 Mar 2022 at 02:49, Tommy Haung <tommy_huang@aspeedtech.com> wrote:
>
> v6:
> Remove some unnecessary reset patch.
> Refine patch format.
> Add detail explain of SOC display reset bits.
>
> v5:
> Add lost reset define.
>
> v4:
> Add necessary reset control for ast2600.
> Add chip caps for futher use.
> These code are test on AST2500 and AST2600 by below steps.
>
> 1. Add below config to turn VT and LOGO on.
>
> CONFIG_TTY=y
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_VT_CONSOLE_SLEEP=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_LDISC_AUTOLOAD=y
> CONFIG_DEVMEM=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> CONFIG_LOGO=y
> CONFIG_LOGO_LINUX_CLUT224=y
>
> 2. The Linux logo will be shown on the screen, when the BMC boot in Linux.
>
> v3:
> Refine the patch for clear separate purpose.
> Skip to send devicetree patch
Looks good! Thanks Tommy.
Reviewed-by: Joel Stanley <joel@jms.id.au>
I'll apply this once I've tested it on hardware.
>
> v2:
> Remove some unnecessary patch.
> Refine for reviwer request.
>
> v1:
> First add patch.
>
> Joel Stanley (2):
> ARM: dts: aspeed: Add GFX node to AST2600
> ARM: dts: aspeed: ast2600-evb: Enable GFX device
>
> Tommy Haung (3):
> drm/aspeed: Update INTR_STS handling
> drm/aspeed: Add AST2600 chip support
> ARM: dtsi: aspeed: Modified gfx reset control
>
> arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
> arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
> drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
> drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 ++++++++++++++-
> 4 files changed, 44 insertions(+), 1 deletion(-)
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/5] Add Aspeed AST2600 soc display support
@ 2022-03-02 3:09 ` Joel Stanley
0 siblings, 0 replies; 24+ messages in thread
From: Joel Stanley @ 2022-03-02 3:09 UTC (permalink / raw)
To: Tommy Haung
Cc: devicetree, linux-aspeed, BMC-SW, David Airlie,
Linux Kernel Mailing List, open list:DRM DRIVERS, Andrew Jeffery,
Rob Herring, Linux ARM
On Wed, 2 Mar 2022 at 02:49, Tommy Haung <tommy_huang@aspeedtech.com> wrote:
>
> v6:
> Remove some unnecessary reset patch.
> Refine patch format.
> Add detail explain of SOC display reset bits.
>
> v5:
> Add lost reset define.
>
> v4:
> Add necessary reset control for ast2600.
> Add chip caps for futher use.
> These code are test on AST2500 and AST2600 by below steps.
>
> 1. Add below config to turn VT and LOGO on.
>
> CONFIG_TTY=y
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_VT_CONSOLE_SLEEP=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_LDISC_AUTOLOAD=y
> CONFIG_DEVMEM=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> CONFIG_LOGO=y
> CONFIG_LOGO_LINUX_CLUT224=y
>
> 2. The Linux logo will be shown on the screen, when the BMC boot in Linux.
>
> v3:
> Refine the patch for clear separate purpose.
> Skip to send devicetree patch
Looks good! Thanks Tommy.
Reviewed-by: Joel Stanley <joel@jms.id.au>
I'll apply this once I've tested it on hardware.
>
> v2:
> Remove some unnecessary patch.
> Refine for reviwer request.
>
> v1:
> First add patch.
>
> Joel Stanley (2):
> ARM: dts: aspeed: Add GFX node to AST2600
> ARM: dts: aspeed: ast2600-evb: Enable GFX device
>
> Tommy Haung (3):
> drm/aspeed: Update INTR_STS handling
> drm/aspeed: Add AST2600 chip support
> ARM: dtsi: aspeed: Modified gfx reset control
>
> arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
> arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
> drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
> drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 ++++++++++++++-
> 4 files changed, 44 insertions(+), 1 deletion(-)
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v6 0/5] Add Aspeed AST2600 soc display support
@ 2022-03-02 3:09 ` Joel Stanley
0 siblings, 0 replies; 24+ messages in thread
From: Joel Stanley @ 2022-03-02 3:09 UTC (permalink / raw)
To: Tommy Haung
Cc: David Airlie, Daniel Vetter, Rob Herring, Andrew Jeffery,
linux-aspeed, open list:DRM DRIVERS, devicetree, Linux ARM,
Linux Kernel Mailing List, BMC-SW
On Wed, 2 Mar 2022 at 02:49, Tommy Haung <tommy_huang@aspeedtech.com> wrote:
>
> v6:
> Remove some unnecessary reset patch.
> Refine patch format.
> Add detail explain of SOC display reset bits.
>
> v5:
> Add lost reset define.
>
> v4:
> Add necessary reset control for ast2600.
> Add chip caps for futher use.
> These code are test on AST2500 and AST2600 by below steps.
>
> 1. Add below config to turn VT and LOGO on.
>
> CONFIG_TTY=y
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_VT_CONSOLE_SLEEP=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_LDISC_AUTOLOAD=y
> CONFIG_DEVMEM=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> CONFIG_LOGO=y
> CONFIG_LOGO_LINUX_CLUT224=y
>
> 2. The Linux logo will be shown on the screen, when the BMC boot in Linux.
>
> v3:
> Refine the patch for clear separate purpose.
> Skip to send devicetree patch
Looks good! Thanks Tommy.
Reviewed-by: Joel Stanley <joel@jms.id.au>
I'll apply this once I've tested it on hardware.
>
> v2:
> Remove some unnecessary patch.
> Refine for reviwer request.
>
> v1:
> First add patch.
>
> Joel Stanley (2):
> ARM: dts: aspeed: Add GFX node to AST2600
> ARM: dts: aspeed: ast2600-evb: Enable GFX device
>
> Tommy Haung (3):
> drm/aspeed: Update INTR_STS handling
> drm/aspeed: Add AST2600 chip support
> ARM: dtsi: aspeed: Modified gfx reset control
>
> arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++
> arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
> drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 +
> drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 ++++++++++++++-
> 4 files changed, 44 insertions(+), 1 deletion(-)
>
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2022-03-02 3:36 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-02 2:49 [PATCH v6 0/5] Add Aspeed AST2600 soc display support Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 1/5] ARM: dts: aspeed: Add GFX node to AST2600 Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 2/5] ARM: dts: aspeed: ast2600-evb: Enable GFX device Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 3/5] drm/aspeed: Update INTR_STS handling Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 4/5] drm/aspeed: Add AST2600 chip support Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` [PATCH v6 5/5] ARM: dtsi: aspeed: Modified gfx reset control Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 2:49 ` Tommy Haung
2022-03-02 3:08 ` Joel Stanley
2022-03-02 3:08 ` Joel Stanley
2022-03-02 3:08 ` Joel Stanley
2022-03-02 3:09 ` [PATCH v6 0/5] Add Aspeed AST2600 soc display support Joel Stanley
2022-03-02 3:09 ` Joel Stanley
2022-03-02 3:09 ` Joel Stanley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.