All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>,
	"Pratyush Yadav" <p.yadav@ti.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>
Subject: [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers
Date: Wed,  2 Mar 2022 18:31:14 +0100	[thread overview]
Message-ID: <20220302173114.927476-11-clg@kaod.org> (raw)
In-Reply-To: <20220302173114.927476-1-clg@kaod.org>

All these controllers support at least Dual SPI. Update the DTs.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9ae67e83cf60..31e6569db97e 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -64,27 +64,32 @@ fmc: spi@1e620000 {
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -100,6 +105,7 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c3e0a8e13c8a..29bf017899b6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -66,18 +66,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -93,12 +96,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -114,12 +119,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1ad05dde19d2..ce93c56a21a7 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -106,18 +106,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -133,12 +136,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -154,18 +159,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>,
	"Pratyush Yadav" <p.yadav@ti.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>
Subject: [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers
Date: Wed,  2 Mar 2022 18:31:14 +0100	[thread overview]
Message-ID: <20220302173114.927476-11-clg@kaod.org> (raw)
In-Reply-To: <20220302173114.927476-1-clg@kaod.org>

All these controllers support at least Dual SPI. Update the DTs.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9ae67e83cf60..31e6569db97e 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -64,27 +64,32 @@ fmc: spi@1e620000 {
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -100,6 +105,7 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c3e0a8e13c8a..29bf017899b6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -66,18 +66,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -93,12 +96,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -114,12 +119,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1ad05dde19d2..ce93c56a21a7 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -106,18 +106,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -133,12 +136,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -154,18 +159,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>,
	"Pratyush Yadav" <p.yadav@ti.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>
Subject: [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers
Date: Wed,  2 Mar 2022 18:31:14 +0100	[thread overview]
Message-ID: <20220302173114.927476-11-clg@kaod.org> (raw)
In-Reply-To: <20220302173114.927476-1-clg@kaod.org>

All these controllers support at least Dual SPI. Update the DTs.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9ae67e83cf60..31e6569db97e 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -64,27 +64,32 @@ fmc: spi@1e620000 {
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -100,6 +105,7 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c3e0a8e13c8a..29bf017899b6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -66,18 +66,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -93,12 +96,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -114,12 +119,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1ad05dde19d2..ce93c56a21a7 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -106,18 +106,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -133,12 +136,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -154,18 +159,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-03-02 17:33 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-02 17:31 [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` Cédric Le Goater
2022-03-02 17:31 ` [PATCH v2 01/10] mtd: spi-nor: aspeed: Rename Kconfig option Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:16   ` Joel Stanley
2022-03-02 22:16     ` Joel Stanley
2022-03-02 22:16     ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 02/10] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:18   ` Joel Stanley
2022-03-02 22:18     ` Joel Stanley
2022-03-02 22:18     ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 03/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 21:26   ` Rob Herring
2022-03-02 21:26     ` Rob Herring
2022-03-02 21:26     ` Rob Herring
2022-03-02 22:20   ` Joel Stanley
2022-03-02 22:20     ` Joel Stanley
2022-03-02 22:20     ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 04/10] spi: spi-mem: Add driver for Aspeed SMC controllers Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 23:38   ` Joel Stanley
2022-03-02 23:38     ` Joel Stanley
2022-03-02 23:38     ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 05/10] spi: aspeed: Add support for direct mapping Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:48   ` Joel Stanley
2022-03-02 22:48     ` Joel Stanley
2022-03-02 22:48     ` Joel Stanley
2022-03-03 12:02   ` kernel test robot
2022-03-02 17:31 ` [PATCH v2 06/10] spi: aspeed: Adjust direct mapping to device size Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:31   ` Joel Stanley
2022-03-02 22:31     ` Joel Stanley
2022-03-02 22:31     ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 07/10] spi: aspeed: Workaround AST2500 limitations Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:30   ` Joel Stanley
2022-03-02 22:30     ` Joel Stanley
2022-03-02 22:30     ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 08/10] spi: aspeed: Add support for the AST2400 SPI controller Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:33   ` Joel Stanley
2022-03-02 22:33     ` Joel Stanley
2022-03-02 22:33     ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 09/10] spi: aspeed: Calibrate read timings Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:44   ` Joel Stanley
2022-03-02 22:44     ` Joel Stanley
2022-03-02 22:44     ` Joel Stanley
2022-03-02 17:31 ` Cédric Le Goater [this message]
2022-03-02 17:31   ` [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers Cédric Le Goater
2022-03-02 17:31   ` Cédric Le Goater
2022-03-02 22:45   ` Joel Stanley
2022-03-02 22:45     ` Joel Stanley
2022-03-02 22:45     ` Joel Stanley
2022-03-02 22:48     ` Joel Stanley
2022-03-02 22:48       ` Joel Stanley
2022-03-02 22:48       ` Joel Stanley
2022-03-03  7:57       ` Cédric Le Goater
2022-03-03  7:57         ` Cédric Le Goater
2022-03-03  7:57         ` Cédric Le Goater
2022-03-03 10:01 ` [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers Joel Stanley
2022-03-03 10:01   ` Joel Stanley
2022-03-03 10:01   ` Joel Stanley
2022-03-04  7:57   ` Tao Ren
2022-03-04  7:57     ` Tao Ren
2022-03-04  7:57     ` Tao Ren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220302173114.927476-11-clg@kaod.org \
    --to=clg@kaod.org \
    --cc=andrew@aj.id.au \
    --cc=broonie@kernel.org \
    --cc=chin-ting_kuo@aspeedtech.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.