[PATCH v3 1/9] dt-bindings: sun6i-a31-mipi-dphy: Add optional direction property

[Paul Kocialkowski <paul.kocialkowski@bootlin.com>]

The Allwinner A31 MIPI D-PHY block supports both tx and rx directions,
although each instance of the block is meant to be used in one
direction only. There will typically be one instance for MIPI DSI and
one for MIPI CSI-2 (it seems unlikely to ever see a shared instance).

Describe the direction with a new allwinner,direction property.
For backwards compatibility, the property is optional and tx mode
should be assumed by default.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 .../bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml  | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index d0b541a461f3..22636c9fdab8 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -37,6 +37,18 @@ properties:
   resets:
     maxItems: 1
 
+  allwinner,direction:
+    $ref: '/schemas/types.yaml#/definitions/string'
+    description: |
+      Direction of the D-PHY:
+      - "rx" for receiving (e.g. when used with MIPI CSI-2);
+      - "tx" for transmitting (e.g. when used with MIPI DSI).
+
+    enum:
+      - tx
+      - rx
+    default: tx
+
 required:
   - "#phy-cells"
   - compatible
-- 
2.35.1